MIBs Depot

WHISP-BOX-MIBV2-MIB

Registered at
1.3.6.1.4.1.161.19.1.1.8
1.3.6.1.4.1.161.19.3.3.1
1.3.6.1.4.1.161.19.3.3.2
1.3.6.1.4.1.161.19.3.3.3
1.3.6.1.4.1.161.19.3.3.5
1.3.6.1.4.1.161.19.3.3.6
1.3.6.1.4.1.161.19.3.3.7
1.3.6.1.4.1.161.19.3.3.9
1.3.6.1.4.1.161.19.3.3.12
1.3.6.1.4.1.161.19.3.3.13
1.3.6.1.4.1.161.19.3.3.14
1.3.6.1.4.1.161.19.3.3.15
1.3.6.1.4.1.161.19.3.3.16
1.3.6.1.4.1.161.19.3.3.18
1.3.6.1.4.1.161.19.3.3.19
Last updated
2003-04-15 00:00
Organization
Cambium Networks
Namespace
cambium
Source file
WHISP-BOX-MIBV2-MIB
Digest
sha256:2bb910a2a7bec409f6b02834fba08ca3e2a30abf4afbcee016b7db2a099e821d

Description

This module contains generic Box-Level MIB definitions for Canopy Radios.

Contact

Cambium Networks Support email: support@cambiumnetworks.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION
WHISP-GLOBAL-REG-MIBwhispBox, whispModules
WHISP-TCV2-MIBEventString, WhispLUID, WhispMACAddress

Imported by

2 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WHISP-BOX-MIBV2-MIB
WHISP-GLOBAL-REG-MIB
WHISP-TCV2-MIB

Objects

NameOIDSyntaxAccessStatus
whispBoxStatus
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.1
whispBoxSoftwareVer
OBJECT-TYPE
Version of software. Should be noted in the event customer has technical difficulties and need to contact technical support.
1.3.6.1.4.1.161.19.3.3.1.1DisplayStringread-onlycurrent
whispBoxFPGAVer
OBJECT-TYPE
Version of FPGA.
1.3.6.1.4.1.161.19.3.3.1.2DisplayStringread-onlycurrent
whispBoxEsn
OBJECT-TYPE
Electronic serial number(MAC address) assigned to Radio.
1.3.6.1.4.1.161.19.3.3.1.3DisplayStringread-onlycurrent
whispBoxBoot
OBJECT-TYPE
Software boot version.
1.3.6.1.4.1.161.19.3.3.1.4DisplayStringread-onlycurrent
boxTemperature
OBJECT-TYPE
Radio temperature.
1.3.6.1.4.1.161.19.3.3.1.5DisplayStringread-onlyobsolete
boxDeviceType
OBJECT-TYPE
The type of the device.
1.3.6.1.4.1.161.19.3.3.1.6DisplayStringread-onlycurrent
boxDeviceTypeID
OBJECT-TYPE
Device type ID.
1.3.6.1.4.1.161.19.3.3.1.7DisplayStringread-onlycurrent
boxEncryption
OBJECT-TYPE
Device encryption type. Note: Returns DES also when encryption is set to None on AP.
1.3.6.1.4.1.161.19.3.3.1.8DisplayStringread-onlycurrent
etherLinkStatus
OBJECT-TYPE
Ethernet link status.
1.3.6.1.4.1.161.19.3.3.1.9DisplayStringread-onlycurrent
boxFrequency
OBJECT-TYPE
Frequency band of the device.
1.3.6.1.4.1.161.19.3.3.1.10DisplayStringread-onlycurrent
platformVer
OBJECT-TYPE
Hardware platform version. For internal use.
1.3.6.1.4.1.161.19.3.3.1.11INTEGERread-onlycurrent
platformType
OBJECT-TYPE
Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage, Advantage, Russian, Russian - Advantage.
1.3.6.1.4.1.161.19.3.3.1.12DisplayStringread-onlycurrent
dhcpLanIp
OBJECT-TYPE
LAN interface IP obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.13IpAddressread-onlycurrent
dhcpLanSubnetMask
OBJECT-TYPE
LAN interface Subnet Mask obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.14IpAddressread-onlycurrent
dhcpLanGateway
OBJECT-TYPE
LAN interface Gateway obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.15IpAddressread-onlycurrent
dhcpRfPublicIp
OBJECT-TYPE
RF Public interface IP obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.16IpAddressread-onlycurrent
dhcpRfPublicSubnetMask
OBJECT-TYPE
RF Public interface Subnet Mask obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.17IpAddressread-onlycurrent
dhcpRfPublicGateway
OBJECT-TYPE
RF Public interface Gateway obtained through DHCP.
1.3.6.1.4.1.161.19.3.3.1.18IpAddressread-onlycurrent
lanDhcpStatus
OBJECT-TYPE
Display LAN interface current DHPC status.
1.3.6.1.4.1.161.19.3.3.1.19DisplayStringread-onlycurrent
rfPublicDhcpStatus
OBJECT-TYPE
Display RF Public interface current DHPC status.
1.3.6.1.4.1.161.19.3.3.1.20DisplayStringread-onlycurrent
inSyncCount
OBJECT-TYPE
Counter for number of In Synchronization.
1.3.6.1.4.1.161.19.3.3.1.21INTEGERread-onlycurrent
outSyncCount
OBJECT-TYPE
Counter for number of Out of Synchronization.
1.3.6.1.4.1.161.19.3.3.1.22INTEGERread-onlycurrent
pllOutLockCount
OBJECT-TYPE
Counter for number of PLL out of Lock.
1.3.6.1.4.1.161.19.3.3.1.23INTEGERread-onlycurrent
txCalFailure
OBJECT-TYPE
Counter for number of TX Calibration failure.
1.3.6.1.4.1.161.19.3.3.1.24INTEGERread-onlycurrent
swVersion
OBJECT-TYPE
Software version information.
1.3.6.1.4.1.161.19.3.3.1.25DisplayStringread-onlycurrent
pldVersion
OBJECT-TYPE
PLD version information.
1.3.6.1.4.1.161.19.3.3.1.26DisplayStringread-onlycurrent
platformInfo
OBJECT-TYPE
Platform information.
1.3.6.1.4.1.161.19.3.3.1.27DisplayStringread-onlycurrent
antPolarization
OBJECT-TYPE
Antenna polarization for FSK radios.
1.3.6.1.4.1.161.19.3.3.1.28DisplayStringread-onlycurrent
packetOverloadCounter
OBJECT-TYPE
Total packet overload count.
1.3.6.1.4.1.161.19.3.3.1.29Counter32read-onlycurrent
whispBoxP11Personality
OBJECT-TYPE
Board Personality Configuration
1.3.6.1.4.1.161.19.3.3.1.30DisplayStringread-onlycurrent
whispBoxP11FPGAType
OBJECT-TYPE
FPGA Type
1.3.6.1.4.1.161.19.3.3.1.31DisplayStringread-onlycurrent
whispBoxP11BstrapFPGAVer
OBJECT-TYPE
P11 Bootstrap FPGA Version.
1.3.6.1.4.1.161.19.3.3.1.32DisplayStringread-onlycurrent
numDFSDetections
OBJECT-TYPE
Number of DFS Detections since last boot.
1.3.6.1.4.1.161.19.3.3.1.33Counter32read-onlycurrent
rxOverrunPkts
OBJECT-TYPE
Counter for number of received overrun packets error.
1.3.6.1.4.1.161.19.3.3.1.34Counter32read-onlycurrent
boxTemperatureC
OBJECT-TYPE
Radio temperature in Celsius.
1.3.6.1.4.1.161.19.3.3.1.35INTEGERread-onlycurrent
boxTemperatureF
OBJECT-TYPE
Radio temperature in Fahrenheit.
1.3.6.1.4.1.161.19.3.3.1.36INTEGERread-onlycurrent
bridgeCbFecStatbin
OBJECT-TYPE
Bridge CB FEC Stats bin
1.3.6.1.4.1.161.19.3.3.1.37Counter32read-onlycurrent
bridgeCbFecStatbout
OBJECT-TYPE
Bridge CB FEC Stats bout
1.3.6.1.4.1.161.19.3.3.1.38Counter32read-onlycurrent
bridgeCbFecStatbtoss
OBJECT-TYPE
Bridge CB FEC Stats btoss
1.3.6.1.4.1.161.19.3.3.1.39Counter32read-onlycurrent
bridgeCbFecStatbtosscap
OBJECT-TYPE
Bridge CB FEC Stats btosscap
1.3.6.1.4.1.161.19.3.3.1.40Counter32read-onlycurrent
bridgeCbFecStatuin
OBJECT-TYPE
Bridge CB FEC Stats uin
1.3.6.1.4.1.161.19.3.3.1.41Counter32read-onlycurrent
bridgeCbFecStatuout
OBJECT-TYPE
Bridge CB FEC Stats uout
1.3.6.1.4.1.161.19.3.3.1.42Counter32read-onlycurrent
bridgeCbFecStatutoss
OBJECT-TYPE
Bridge CB FEC Stats utoss
1.3.6.1.4.1.161.19.3.3.1.43Counter32read-onlycurrent
bridgeCbFecStatutosscap
OBJECT-TYPE
Bridge CB FEC Stats utosscap
1.3.6.1.4.1.161.19.3.3.1.44Counter32read-onlycurrent
bridgeCbRFStatbin
OBJECT-TYPE
Bridge CB RF Stats bin
1.3.6.1.4.1.161.19.3.3.1.45Counter32read-onlycurrent
bridgeCbRFStatbout
OBJECT-TYPE
Bridge CB RF Stats bout
1.3.6.1.4.1.161.19.3.3.1.46Counter32read-onlycurrent
bridgeCbRFStatbtoss
OBJECT-TYPE
Bridge CB RF Stats btoss
1.3.6.1.4.1.161.19.3.3.1.47Counter32read-onlycurrent
bridgeCbRFStatbtosscap
OBJECT-TYPE
Bridge CB RF Stats btosscap
1.3.6.1.4.1.161.19.3.3.1.48Counter32read-onlycurrent
bridgeCbRFStatuin
OBJECT-TYPE
Bridge CB RF Stats uin
1.3.6.1.4.1.161.19.3.3.1.49Counter32read-onlycurrent
bridgeCbRFStatuout
OBJECT-TYPE
Bridge CB RF Stats uout
1.3.6.1.4.1.161.19.3.3.1.50Counter32read-onlycurrent
bridgeCbRFStatutoss
OBJECT-TYPE
Bridge CB RF Stats utoss
1.3.6.1.4.1.161.19.3.3.1.51Counter32read-onlycurrent
bridgeCbRFStatutosscap
OBJECT-TYPE
Bridge CB RF Stats utosscap
1.3.6.1.4.1.161.19.3.3.1.52Counter32read-onlycurrent
bridgeCbErrStatNI1QSend
OBJECT-TYPE
Bridge CB Error Stats ErrNI1QSend
1.3.6.1.4.1.161.19.3.3.1.53Counter32read-onlycurrent
bridgeCbErrStatNI2QSend
OBJECT-TYPE
Bridge CB Error Stats ErrNI2QSend
1.3.6.1.4.1.161.19.3.3.1.54Counter32read-onlycurrent
bridgeCbErrStatBridgeFull
OBJECT-TYPE
Bridge CB Error Stats BridgeFull
1.3.6.1.4.1.161.19.3.3.1.55Counter32read-onlycurrent
bridgeCbErrStatSendMsg
OBJECT-TYPE
Bridge CB Error Stats SendMsg
1.3.6.1.4.1.161.19.3.3.1.56Counter32read-onlycurrent
bridgeCbErrStatAPFecQSend
OBJECT-TYPE
Bridge CB Error Stats APFecQSend
1.3.6.1.4.1.161.19.3.3.1.57Counter32read-onlycurrent
bridgeCbErrStatApRfQSend
OBJECT-TYPE
Bridge CB Error Stats ApRfQSend
1.3.6.1.4.1.161.19.3.3.1.58Counter32read-onlycurrent
rfStatXmtUDataCnt
OBJECT-TYPE
RF Scheduler Stats Transmit Unicast Data Count
1.3.6.1.4.1.161.19.3.3.1.59Counter32read-onlycurrent
rfStatXmtBDataCnt
OBJECT-TYPE
RF Scheduler Stats Transmit Broadcast Data Count
1.3.6.1.4.1.161.19.3.3.1.60Counter32read-onlycurrent
rfStatRcvUDataCnt
OBJECT-TYPE
RF Scheduler Stats Receive Unicast Data Count
1.3.6.1.4.1.161.19.3.3.1.61Counter32read-onlycurrent
rfStatRcvBDataCnt
OBJECT-TYPE
RF Scheduler Stats Receive Broadcast Data Count
1.3.6.1.4.1.161.19.3.3.1.62Counter32read-onlycurrent
rfStatXmtCntlCnt
OBJECT-TYPE
RF Scheduler Stats Transmit Control Count
1.3.6.1.4.1.161.19.3.3.1.63Counter32read-onlycurrent
rfStatRcvCntlCnt
OBJECT-TYPE
RF Scheduler Stats Receive Control Count
1.3.6.1.4.1.161.19.3.3.1.64Counter32read-onlycurrent
rfStatInSyncCount
OBJECT-TYPE
RF Scheduler Stats In Sync Count
1.3.6.1.4.1.161.19.3.3.1.65Counter32read-onlycurrent
rfStatOutSyncCount
OBJECT-TYPE
RF Scheduler Stats Out Sync Count
1.3.6.1.4.1.161.19.3.3.1.66Counter32read-onlycurrent
rfStatOverrunCount
OBJECT-TYPE
RF Scheduler Stats Overrun Count
1.3.6.1.4.1.161.19.3.3.1.67Counter32read-onlycurrent
rfStatUnderrunCount
OBJECT-TYPE
RF Scheduler Stats Underrun Count
1.3.6.1.4.1.161.19.3.3.1.68Counter32read-onlycurrent
rfStatRcvCorruptDataCount
OBJECT-TYPE
RF Scheduler Stats Receive Corrupt Data Count
1.3.6.1.4.1.161.19.3.3.1.69Counter32read-onlycurrent
rfStatBadBcastCtlCnt
OBJECT-TYPE
RF Scheduler Stats Bad Broadcast Control Count
1.3.6.1.4.1.161.19.3.3.1.70Counter32read-onlycurrent
rfStatPLLOutOfLockCnt
OBJECT-TYPE
RF Scheduler Stats PLL Out of Lock Count
1.3.6.1.4.1.161.19.3.3.1.71Counter32read-onlycurrent
rfStatBeaconVerMismatchCnt
OBJECT-TYPE
RF Scheduler Stats Beacon version Mismatch Count
1.3.6.1.4.1.161.19.3.3.1.72Counter32read-onlycurrent
rfStatBadFreqBcnRcvCnt
OBJECT-TYPE
RF Scheduler Stats Wrong Frequency Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.73Counter32read-onlycurrent
rfStatnonLiteBcnRcvCnt
OBJECT-TYPE
RF Scheduler Stats Non Lite Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.74Counter32read-onlycurrent
rfStatUnsupFeatBcnRcvCnt
OBJECT-TYPE
RF Scheduler Stats Unsupported Feature Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.75Counter32read-onlycurrent
rfStatUnkwnFeatBcnRcvCnt
OBJECT-TYPE
RF Scheduler Stats Unknown Feature Beacon Received Count
1.3.6.1.4.1.161.19.3.3.1.76Counter32read-onlycurrent
rfStatTxCalFailCnt
OBJECT-TYPE
RF Scheduler Stats TX Calibration Failures Count
1.3.6.1.4.1.161.19.3.3.1.77Counter32read-onlycurrent
rfStatBadInSyncIDRcv
OBJECT-TYPE
RF Scheduler Stats Bad In Sync ID Received Count
1.3.6.1.4.1.161.19.3.3.1.78Counter32read-onlycurrent
rfStatTempOutOfRange
OBJECT-TYPE
RF Scheduler Stats Temperature Out of Range Count
1.3.6.1.4.1.161.19.3.3.1.79Counter32read-onlycurrent
rfStatRSSIOutOfRange
OBJECT-TYPE
RF Scheduler Stats RSSI Out of Range Count
1.3.6.1.4.1.161.19.3.3.1.80Counter32read-onlycurrent
rfStatRangeCapEnf
OBJECT-TYPE
RF Scheduler Stats Range Cap Enforced Count
1.3.6.1.4.1.161.19.3.3.1.81Counter32read-onlycurrent
rfStatRcvLTStart
OBJECT-TYPE
RF Scheduler Stats Rcv LT Start Count
1.3.6.1.4.1.161.19.3.3.1.82Counter32read-onlycurrent
rfStatRcvLTStartHS
OBJECT-TYPE
RF Scheduler Stats Rcv LT Start HS Count
1.3.6.1.4.1.161.19.3.3.1.83Counter32read-onlycurrent
rfStatRcvLTResult
OBJECT-TYPE
RF Scheduler Stats Rcv LT Result Count
1.3.6.1.4.1.161.19.3.3.1.84Counter32read-onlycurrent
rfStatXmtLTResult
OBJECT-TYPE
RF Scheduler Stats Xmt LT Result Count
1.3.6.1.4.1.161.19.3.3.1.85Counter32read-onlycurrent
whispFeatureKeyOrigin
OBJECT-TYPE
Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)
1.3.6.1.4.1.161.19.3.3.1.86DisplayStringread-onlycurrent
radioMSN
OBJECT-TYPE
MSN of the radio.
1.3.6.1.4.1.161.19.3.3.1.87DisplayStringread-onlycurrent
updateStatus
OBJECT-TYPE
Current Status of Device Update
1.3.6.1.4.1.161.19.3.3.1.88INTEGERread-onlycurrent
syslogStatTxSuccesses
OBJECT-TYPE
The count of Syslog messages sent to UDP layer.
1.3.6.1.4.1.161.19.3.3.1.89INTEGERread-onlycurrent
syslogStatDropped
OBJECT-TYPE
Number of dropped syslog messages due to device overload and/or resource limitations.
1.3.6.1.4.1.161.19.3.3.1.90INTEGERread-onlycurrent
fecStatLinkLost
OBJECT-TYPE
Ethernet link lost count
1.3.6.1.4.1.161.19.3.3.1.91Counter32read-onlycurrent
fecStatLinkDetected
OBJECT-TYPE
Ethernet link detected count
1.3.6.1.4.1.161.19.3.3.1.92Counter32read-onlycurrent
natDhcpStatus
OBJECT-TYPE
Display NAT Public interface current DHPC status.
1.3.6.1.4.1.161.19.3.3.1.93DisplayStringread-onlycurrent
fecInDiscardsCount
OBJECT-TYPE
Ethernet in discards count.
1.3.6.1.4.1.161.19.3.3.1.94Unsigned32read-onlycurrent
fecInErrorsCount
OBJECT-TYPE
Ethernet in errors count.
1.3.6.1.4.1.161.19.3.3.1.95Unsigned32read-onlycurrent
fecOutDiscardsCount
OBJECT-TYPE
Ethernet out discards count.
1.3.6.1.4.1.161.19.3.3.1.96Unsigned32read-onlycurrent
fecOutErrorsCount
OBJECT-TYPE
Ethernet out errors count.
1.3.6.1.4.1.161.19.3.3.1.97Unsigned32read-onlycurrent
rfInDiscardsCount
OBJECT-TYPE
RF in discards count. This attribute is deprecated. Use rfInDiscardsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.98Unsigned32read-onlydeprecated
rfInErrorsCount
OBJECT-TYPE
RF in errors count. This attribute is deprecated. Use rfInErrorsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.99Unsigned32read-onlydeprecated
rfOutDiscardsCount
OBJECT-TYPE
RF out discards count. This attribute is deprecated. Use rfOutDiscardsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.100Unsigned32read-onlydeprecated
rfOutErrorsCount
OBJECT-TYPE
RF out errors count. This attribute is deprecated. Use rfOutErrorsCountExt instead.
1.3.6.1.4.1.161.19.3.3.1.101Unsigned32read-onlydeprecated
fecInDiscardsOverloadCount
OBJECT-TYPE
Ethernet in discards overload.
1.3.6.1.4.1.161.19.3.3.1.102Counter32read-onlycurrent
fecOutDiscardsOverloadCount
OBJECT-TYPE
Ethernet out discards overload.
1.3.6.1.4.1.161.19.3.3.1.103Counter32read-onlycurrent
rfInDiscardsOverloadCount
OBJECT-TYPE
Rf in discards overload.
1.3.6.1.4.1.161.19.3.3.1.104Counter32read-onlycurrent
rfOutDiscardsOverloadCount
OBJECT-TYPE
Rf out discards overload.
1.3.6.1.4.1.161.19.3.3.1.105Counter32read-onlycurrent
fpgaCompileInfo
OBJECT-TYPE
Display the fpga compiled attributes. (Engineering Only)
1.3.6.1.4.1.161.19.3.3.1.106DisplayStringread-onlycurrent
fpgaBuildDate
OBJECT-TYPE
Display the entire fpga build date string. (Engineering Only)
1.3.6.1.4.1.161.19.3.3.1.107DisplayStringread-onlycurrent
aggregateBandwidthCap
OBJECT-TYPE
The maximum aggregate (uplink + downlink) the radio is capable of.
1.3.6.1.4.1.161.19.3.3.1.108INTEGERread-onlycurrent
calibrationStatusBool
OBJECT-TYPE
Boolean OID to show if device is calibrated. Applicable to FSK and MIMO radios only.
1.3.6.1.4.1.161.19.3.3.1.109INTEGER {notCalibrated(0), calibrated(1)}read-onlycurrent
calibrationStatusBox
OBJECT-TYPE
String to show if radio is calibrated. Applicable to FSK and MIMO radios only.
1.3.6.1.4.1.161.19.3.3.1.110DisplayStringread-onlycurrent
radioEngKeyed
OBJECT-TYPE
This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied.
1.3.6.1.4.1.161.19.3.3.1.111INTEGERread-onlycurrent
bridgeCbFecStatfloods
OBJECT-TYPE
Bridge CB FEC Stats Floods (Multipoint AP only)
1.3.6.1.4.1.161.19.3.3.1.112Counter32read-onlycurrent
bridgeCbRFStatfloods
OBJECT-TYPE
Bridge CB RF Stats Floods (Multipoint AP only)
1.3.6.1.4.1.161.19.3.3.1.113Counter32read-onlycurrent
catalinaGainRxCH1
OBJECT-TYPE
Rcv Gain on Catalina Rx CH1. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.114INTEGERread-onlycurrent
catalinaGainRxCH2
OBJECT-TYPE
Rcv Gain on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.115INTEGERread-onlycurrent
antType
OBJECT-TYPE
Indicates whether the antenna is integrated or external (connectorized).
1.3.6.1.4.1.161.19.3.3.1.116INTEGER {integrated(0), external(1)}read-onlycurrent
rfStatRcvCorruptControlCount
OBJECT-TYPE
RF Scheduler Stats Receive Corrupt Control Data Count
1.3.6.1.4.1.161.19.3.3.1.117Counter32read-onlycurrent
numLBTDetections
OBJECT-TYPE
Number of LBT Detections since last boot.
1.3.6.1.4.1.161.19.3.3.1.118Counter32read-onlycurrent
bridgeCbEthAuxStatbin
OBJECT-TYPE
Bridge CB Eth Aux Stats bin
1.3.6.1.4.1.161.19.3.3.1.119Counter32read-onlycurrent
bridgeCbEthAuxStatbout
OBJECT-TYPE
Bridge CB Eth Aux Stats bout
1.3.6.1.4.1.161.19.3.3.1.120Counter32read-onlycurrent
catalinaAttenTxCH1
OBJECT-TYPE
Attenuation on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.121INTEGERread-onlycurrent
catalinaAttenTxCH2
OBJECT-TYPE
Attenuation on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.122INTEGERread-onlycurrent
catalinaCurrDetSetpointTxCH1
OBJECT-TYPE
Current Detector Setpoint on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.123INTEGERread-onlycurrent
catalinaCurrDetSetpointTxCH2
OBJECT-TYPE
Current Detector Setpoint on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.124INTEGERread-onlycurrent
catalinaCurrDetReadRefTxCH1
OBJECT-TYPE
Current Detector Reference on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.125INTEGERread-onlycurrent
catalinaCurrDetReadRefTxCH2
OBJECT-TYPE
Current Detector Reference on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.126INTEGERread-onlycurrent
catalinaCurrDetReadPowerOnTxCH1
OBJECT-TYPE
Current Detector PowerOn on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.127INTEGERread-onlycurrent
catalinaCurrDetReadPowerOnTxCH2
OBJECT-TYPE
Current Detector PowerOn on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.128INTEGERread-onlycurrent
catalinaOpenLoopAttenTxCH1
OBJECT-TYPE
Open Loop Attenuation on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.129INTEGERread-onlycurrent
catalinaOpenLoopAttenTxCH2
OBJECT-TYPE
Open Loop Attenuation on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.130INTEGERread-onlycurrent
catalinaTargetDetSetpointTxCH1
OBJECT-TYPE
Target Detector Setpoint on Catalina Tx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.131INTEGERread-onlycurrent
catalinaTargetDetSetpointTxCH2
OBJECT-TYPE
Target Detector Setpoint on Catalina Tx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.132INTEGERread-onlycurrent
catalinaGainReductionRxCH1
OBJECT-TYPE
Gain Reduction on Catalina Rx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.133INTEGERread-onlycurrent
catalinaGainReductionRxCH2
OBJECT-TYPE
Gain Reduction on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.134INTEGERread-onlycurrent
catalinaLoAttenRxCH1
OBJECT-TYPE
Lo Attenuation on Catalina Rx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.135INTEGERread-onlycurrent
catalinaLoAttenRxCH2
OBJECT-TYPE
Lo Attenuation on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.136INTEGERread-onlycurrent
catalinaTargetGainRxCH1
OBJECT-TYPE
Target Gain on Catalina Rx CH1. Engineering Use Only.
1.3.6.1.4.1.161.19.3.3.1.137INTEGERread-onlycurrent
catalinaTargetGainRxCH2
OBJECT-TYPE
Target Gain on Catalina Rx CH2. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.138INTEGERread-onlycurrent
bridgeCbEthAuxStatfloods
OBJECT-TYPE
Bridge CB Eth Aux Stats Floods (Multipoint AP only)
1.3.6.1.4.1.161.19.3.3.1.139Counter32read-onlycurrent
bridgeCbEthAuxStatbtoss
OBJECT-TYPE
Bridge CB Eth Aux Stats btoss
1.3.6.1.4.1.161.19.3.3.1.141Counter32read-onlycurrent
bridgeCbEthAuxStatbtosscap
OBJECT-TYPE
Bridge CB Eth Aux Stats btosscap
1.3.6.1.4.1.161.19.3.3.1.142Counter32read-onlycurrent
bridgeCbEthAuxStatuin
OBJECT-TYPE
Bridge CB Eth Aux Stats uin
1.3.6.1.4.1.161.19.3.3.1.143Counter32read-onlycurrent
bridgeCbEthAuxStatuout
OBJECT-TYPE
Bridge CB Eth Aux Stats uout
1.3.6.1.4.1.161.19.3.3.1.144Counter32read-onlycurrent
bridgeCbEthAuxStatutoss
OBJECT-TYPE
Bridge CB Eth Aux Stats utoss
1.3.6.1.4.1.161.19.3.3.1.145Counter32read-onlycurrent
bridgeCbEthAuxStatutosscap
OBJECT-TYPE
Bridge CB Eth Aux Stats utosscap
1.3.6.1.4.1.161.19.3.3.1.146Counter32read-onlycurrent
radioWatchDogLogged
OBJECT-TYPE
This will be set either as 0 if there is no watchdog event logged or 1 if there is.
1.3.6.1.4.1.161.19.3.3.1.147INTEGERread-onlycurrent
radioFatalErrorLogged
OBJECT-TYPE
This will be set either as 0 if there is no fatalerror event logged or 1 if there is.
1.3.6.1.4.1.161.19.3.3.1.148INTEGERread-onlycurrent
fecStatLinkUptime
OBJECT-TYPE
Uptime of main ethernet link in seconds
1.3.6.1.4.1.161.19.3.3.1.149DisplayStringread-onlycurrent
fecAuxStatLinkUptime
OBJECT-TYPE
Uptime of main ethernet link in seconds
1.3.6.1.4.1.161.19.3.3.1.150DisplayStringread-onlycurrent
rfStatXmtMDataCnt
OBJECT-TYPE
RF Scheduler Stats Transmit Multicast Data Count
1.3.6.1.4.1.161.19.3.3.1.217Counter32read-onlycurrent
rfStatRcvMDataCnt
OBJECT-TYPE
RF Scheduler Stats Receive Multicast Data Count
1.3.6.1.4.1.161.19.3.3.1.218Counter32read-onlycurrent
fecStatUnderSizedToss
OBJECT-TYPE
Undersized Toss Count
1.3.6.1.4.1.161.19.3.3.1.219Counter32read-onlycurrent
fecRxBabErr
OBJECT-TYPE
Error count in Babble Receiver.
1.3.6.1.4.1.161.19.3.3.1.220Counter32read-onlycurrent
fecTxHbErr
OBJECT-TYPE
Number of packets having Transmit heartbeat error.
1.3.6.1.4.1.161.19.3.3.1.221Counter32read-onlycurrent
fecEthBusErr
OBJECT-TYPE
Ethernet Busy Error Count
1.3.6.1.4.1.161.19.3.3.1.222Counter32read-onlycurrent
fecCRCError
OBJECT-TYPE
Number of packets having CRC Error.
1.3.6.1.4.1.161.19.3.3.1.223Counter32read-onlycurrent
fecRxFifoNoBuf
OBJECT-TYPE
Number of times could not get a buffer from Rx Fifo.
1.3.6.1.4.1.161.19.3.3.1.224Counter32read-onlycurrent
fecRxOverrun
OBJECT-TYPE
Number of times Rx Fifo Overrun.
1.3.6.1.4.1.161.19.3.3.1.225Counter32read-onlycurrent
fecLateCollision
OBJECT-TYPE
Number of packets having late collision.
1.3.6.1.4.1.161.19.3.3.1.226Counter32read-onlycurrent
fecRetransLimitExp
OBJECT-TYPE
Number of packets whose retransmision limit expired.
1.3.6.1.4.1.161.19.3.3.1.227Counter32read-onlycurrent
fecTxUnderrun
OBJECT-TYPE
Number of times Tx queue underrun.
1.3.6.1.4.1.161.19.3.3.1.228Counter32read-onlycurrent
fecCarSenseLost
OBJECT-TYPE
Carrier Sense Lost count.
1.3.6.1.4.1.161.19.3.3.1.229Counter32read-onlycurrent
fecNoCarrier
OBJECT-TYPE
No carrier asserted by external transceiver during transmission.
1.3.6.1.4.1.161.19.3.3.1.230Counter32read-onlycurrent
framePeriodCurrent
OBJECT-TYPE
Current frame period of the radio.
1.3.6.1.4.1.161.19.3.3.1.231INTEGER {twoPointFiveMs(0), fiveMs(1), scanning(2)}read-onlycurrent
activeTxPowerStr
OBJECT-TYPE
Current transmit power level, including potential power backoff information. Not applicable to PMP 450m.
1.3.6.1.4.1.161.19.3.3.1.232DisplayStringread-onlycurrent
activeTxPowerHdths
OBJECT-TYPE
Current transmit power level, in hundredths of dBm. Not appliable on PMP 450m.
1.3.6.1.4.1.161.19.3.3.1.233INTEGERread-onlycurrent
poeT2Status
OBJECT-TYPE
Indicates the 802.3at Type 2 Classification status. This is only available on the 450i.
1.3.6.1.4.1.161.19.3.3.1.234INTEGER {error(0), notPresent(1), notPresentAndIgnored(2), present(3)}read-onlycurrent
fecAuxStatLinkDetected
OBJECT-TYPE
450i Aux Ethernet link detected count
1.3.6.1.4.1.161.19.3.3.1.235Counter32read-onlycurrent
fecAuxStatLinkLost
OBJECT-TYPE
450i Aux Ethernet ink lost count
1.3.6.1.4.1.161.19.3.3.1.236Counter32read-onlycurrent
fecAuxInDiscardsCount
OBJECT-TYPE
450i Aux Ethernet in discards count.
1.3.6.1.4.1.161.19.3.3.1.237Unsigned32read-onlycurrent
fecAuxInErrorsCount
OBJECT-TYPE
450i Aux Ethernet in errors count.
1.3.6.1.4.1.161.19.3.3.1.238Unsigned32read-onlycurrent
fecAuxOutDiscardsCount
OBJECT-TYPE
450i Aux Ethernet out discards count.
1.3.6.1.4.1.161.19.3.3.1.239Unsigned32read-onlycurrent
fecAuxOutErrorsCount
OBJECT-TYPE
450i Aux Ethernet out errors count.
1.3.6.1.4.1.161.19.3.3.1.240Unsigned32read-onlycurrent
fecAuxCRCError
OBJECT-TYPE
450i Aux Ethernet Number of packets having CRC Error.
1.3.6.1.4.1.161.19.3.3.1.241Counter32read-onlycurrent
fecAuxRxOverrun
OBJECT-TYPE
450i Aux Ethernet Number of times Rx Fifo Overrun.
1.3.6.1.4.1.161.19.3.3.1.242Counter32read-onlycurrent
fecAuxLateCollision
OBJECT-TYPE
450i Aux Ethernet Number of packets having late collision.
1.3.6.1.4.1.161.19.3.3.1.243Counter32read-onlycurrent
fecAuxRetransLimitExp
OBJECT-TYPE
450i Aux Ethernet Number of packets whose retransmision limit expired.
1.3.6.1.4.1.161.19.3.3.1.244Counter32read-onlycurrent
fecAuxTxUnderrun
OBJECT-TYPE
450i Aux Ethernet Number of times Tx queue underrun.
1.3.6.1.4.1.161.19.3.3.1.245Counter32read-onlycurrent
fecAuxCarSenseLost
OBJECT-TYPE
450i Aux Ethernet Carrier Sense Lost count.
1.3.6.1.4.1.161.19.3.3.1.246Counter32read-onlycurrent
fecAuxNoCarrier
OBJECT-TYPE
450i Aux Ethernet No carrier asserted by external transceiver during transmission.
1.3.6.1.4.1.161.19.3.3.1.247Counter32read-onlycurrent
fecAuxLargeFrame
OBJECT-TYPE
450i Aux Ethernet Large Frame Error.
1.3.6.1.4.1.161.19.3.3.1.248Counter32read-onlycurrent
fecAuxRuntFrame
OBJECT-TYPE
450i Aux Ethernet Runt Frame Error.
1.3.6.1.4.1.161.19.3.3.1.249Counter32read-onlycurrent
fecLargeFrame
OBJECT-TYPE
Large Frame Error.
1.3.6.1.4.1.161.19.3.3.1.250Counter32read-onlycurrent
fecRuntFrame
OBJECT-TYPE
Runt Frame Error.
1.3.6.1.4.1.161.19.3.3.1.251Counter32read-onlycurrent
soundingStatClear
OBJECT-TYPE
Sounding Stat Clear Set to any value to clear all Sounding Stats
1.3.6.1.4.1.161.19.3.3.1.252INTEGERread-writecurrent
soundingStatRequestCount
OBJECT-TYPE
Sounding Stats Request Count
1.3.6.1.4.1.161.19.3.3.1.253Counter32read-onlycurrent
soundingStatResponseCount
OBJECT-TYPE
Sounding Stats Response Count
1.3.6.1.4.1.161.19.3.3.1.254Counter32read-onlycurrent
soundingStatRequestsIgnored
OBJECT-TYPE
Sounding Stats Requests Ignored
1.3.6.1.4.1.161.19.3.3.1.255Counter32read-onlycurrent
soundingStatAvgRequestInterval
OBJECT-TYPE
Sounding Stats Avg Request Interval (ms)
1.3.6.1.4.1.161.19.3.3.1.256Counter32read-onlycurrent
soundingStatMaxRequestInterval
OBJECT-TYPE
Sounding Stats Max Request Interval (ms)
1.3.6.1.4.1.161.19.3.3.1.257Counter32read-onlycurrent
soundingStatErrorCount
OBJECT-TYPE
Sounding Stats Error Count
1.3.6.1.4.1.161.19.3.3.1.258Counter32read-onlycurrent
camAccID
OBJECT-TYPE
CnMaestro Account to which Radio is onboarded.
1.3.6.1.4.1.161.19.3.3.1.259DisplayStringread-onlycurrent
cnMaestroStatus
OBJECT-TYPE
CnMaestro connection status.
1.3.6.1.4.1.161.19.3.3.1.260DisplayStringread-onlycurrent
daVersion
OBJECT-TYPE
Device Agent Version number.
1.3.6.1.4.1.161.19.3.3.1.261DisplayStringread-onlycurrent
soundingStatRequestsDropped
OBJECT-TYPE
Sounding Stats Requests Dropped
1.3.6.1.4.1.161.19.3.3.1.262Counter32read-onlycurrent
soundingStatResponsesSuppressed
OBJECT-TYPE
Sounding Stats Responses Suppressed
1.3.6.1.4.1.161.19.3.3.1.263Counter32read-onlycurrent
soundingStatVersionMismatch
OBJECT-TYPE
Sounding Stats Version Mismatch
1.3.6.1.4.1.161.19.3.3.1.264Counter32read-onlycurrent
hardwareVersion
OBJECT-TYPE
Read directly from the resistors on the board is the form Major.Minor (cnMedusa-specific, Engineering Only)
1.3.6.1.4.1.161.19.3.3.1.265DisplayStringread-onlycurrent
productTypeName
OBJECT-TYPE
Basic product type, based on board type and factory programming.
1.3.6.1.4.1.161.19.3.3.1.266DisplayStringread-onlycurrent
radioStatusTransmitControlOverridden
OBJECT-TYPE
Transmit mode control is overridden in config PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.267INTEGERread-onlycurrent
radioStatusTrackingFailure
OBJECT-TYPE
Feedback tracking loop is out of tolerance - Transmit disabled PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.268INTEGERread-onlycurrent
radioStatusSectorWeightsOff
OBJECT-TYPE
Sector mode weights disabled PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.269INTEGERread-onlycurrent
radioStatusRxBeamFormingOff
OBJECT-TYPE
Rx beamforming disabled PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.270INTEGERread-onlycurrent
radioStatusPowerDetectorInactive
OBJECT-TYPE
Power detector control not active PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.271INTEGERread-onlycurrent
radioStatusCatQuadCalFail
OBJECT-TYPE
Catalina Tx quadrature calibration failure 450 platform only. Engineering use only.
1.3.6.1.4.1.161.19.3.3.1.272INTEGERread-onlycurrent
nearFieldOperationActive
OBJECT-TYPE
When true(1) near field operation is enabled and near field range correction is being applied. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.273INTEGER {false(0), true(1)}read-onlycurrent
radioStatusAlarmReason
OBJECT-TYPE
Reason code associated with the cause of a Radio Status Alarm being triggered. Provide this code to Cambium Networks Support. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.274INTEGERread-onlycurrent
radioStatusAlarm
OBJECT-TYPE
Radio Status Alarm. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.1.275INTEGER {false(0), true(1)}read-onlycurrent
forceReassessmentActive
OBJECT-TYPE
When true(1) forced channel assessment is enabled. MU-MIMO only.
1.3.6.1.4.1.161.19.3.3.1.276INTEGER {false(0), true(1)}read-onlycurrent
fecExcessiveDeferrals
OBJECT-TYPE
Excessive Deferrals.
1.3.6.1.4.1.161.19.3.3.1.277Counter32read-onlycurrent
rfInDiscardsCountExt
OBJECT-TYPE
Extended RF in discards count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.278Counter64read-onlycurrent
rfInErrorsCountExt
OBJECT-TYPE
Extended RF in errors count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.279Counter64read-onlycurrent
rfOutDiscardsCountExt
OBJECT-TYPE
Extended RF out discards count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.280Counter64read-onlycurrent
rfOutErrorsCountExt
OBJECT-TYPE
Extended RF out errors count with 64 bit counters.
1.3.6.1.4.1.161.19.3.3.1.281Counter64read-onlycurrent
boardModel
OBJECT-TYPE
Returns Board model of the device.
1.3.6.1.4.1.161.19.3.3.1.284DisplayStringread-onlycurrent
whispBoxConfig
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.2
linkNegoSpeed
OBJECT-TYPE
Link negotiation speeds. H10BT -- 10 Base T Half Duplex, F10BT -- 10 Base T Full Duplex, H100BT -- 100 Base T Half Duplex, F100BT -- 100 Base T Full Duplex. Separate the values with comma when doing a set. e.g. H10BT,F10BT,H100BT,F100BT
1.3.6.1.4.1.161.19.3.3.2.1DisplayStringread-writeobsolete
colorCode
OBJECT-TYPE
Color code.
1.3.6.1.4.1.161.19.3.3.2.2INTEGER (0..254)read-writecurrent
displayOnlyAccess
OBJECT-TYPE
This variable is deprecated.
1.3.6.1.4.1.161.19.3.3.2.3DisplayStringread-writeobsolete
fullAccess
OBJECT-TYPE
Full access password.
1.3.6.1.4.1.161.19.3.3.2.4DisplayStringread-writecurrent
webAutoUpdate
OBJECT-TYPE
Web page auto update in seconds. 0 means disabled.
1.3.6.1.4.1.161.19.3.3.2.5INTEGERread-writecurrent
pass1Status
OBJECT-TYPE
Password 1(display only) status.
1.3.6.1.4.1.161.19.3.3.2.6DisplayStringread-onlycurrent
pass2Status
OBJECT-TYPE
Password 2(full access) status.
1.3.6.1.4.1.161.19.3.3.2.7DisplayStringread-onlycurrent
bridgeEntryTimeout
OBJECT-TYPE
Bridge table time out Range : 25 -- 1440 Minutes.
1.3.6.1.4.1.161.19.3.3.2.8INTEGER (25..1440)read-writecurrent
snmpMibPerm
OBJECT-TYPE
Read/Write permission for MIB groups.
1.3.6.1.4.1.161.19.3.3.2.9INTEGER {readWrite(0), readOnly(1)}read-writecurrent
bhTimingMode
OBJECT-TYPE
Variable to switch between Timing Master and Timing Slave. For Backhaul units only.
1.3.6.1.4.1.161.19.3.3.2.10INTEGER {timeingSlave(0), timingMaster(1)}read-writecurrent
bhModulation
OBJECT-TYPE
Modulation scheme. For Backhaul units only. Only level 4 backhaul can be changed to 20Mbits/Second.
1.3.6.1.4.1.161.19.3.3.2.11INTEGER {tenMbitsPerSecond(0), twentyMbitsPerSecond(1)}read-writeobsolete
powerControl
OBJECT-TYPE
Power control. FSK Only.
1.3.6.1.4.1.161.19.3.3.2.12INTEGER {low(0), normal(1)}read-writecurrent
extFilterDelay
OBJECT-TYPE
Obsoleted. External Filters Delay. For 900MHz FSK radios only.
1.3.6.1.4.1.161.19.3.3.2.13INTEGERread-writeobsolete
antennaGain
OBJECT-TYPE
External Antenna Gain. For radios that uses an external antenna or the DFS feature. Not applicable to PMP 450m.
1.3.6.1.4.1.161.19.3.3.2.14INTEGERread-writecurrent
eirp
OBJECT-TYPE
Transmit EIRP of radio. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.2.15INTEGERread-writecurrent
dynamicLearning
OBJECT-TYPE
To enable VLAN dynamic learning.
1.3.6.1.4.1.161.19.3.3.2.16INTEGER {disabled(0), enabled(1)}read-writecurrent
managementVID
OBJECT-TYPE
Management VLAN VID.
1.3.6.1.4.1.161.19.3.3.2.17INTEGERread-writecurrent
agingTimeout
OBJECT-TYPE
Aging timeout.
1.3.6.1.4.1.161.19.3.3.2.18INTEGERread-writecurrent
frameType
OBJECT-TYPE
Allow only tagged frame.
1.3.6.1.4.1.161.19.3.3.2.19INTEGER {allframes(0), taggedonly(1), untaggedonly(2)}read-writecurrent
addVlanMember
OBJECT-TYPE
Write-Only OID,Add VLAN number which needs to be added.
1.3.6.1.4.1.161.19.3.3.2.20INTEGERread-writecurrent
removeVlanMember
OBJECT-TYPE
Write-only OID,Enter VLAN ID which needs to deleted. If Vlan doesnot exist an error will be returned.
1.3.6.1.4.1.161.19.3.3.2.21INTEGERread-writecurrent
scheduling
OBJECT-TYPE
To use hardware or software scheduling
1.3.6.1.4.1.161.19.3.3.2.22INTEGER {hardware(1)}read-writecurrent
transmitterOP
OBJECT-TYPE
Transmitter output power. This is not available on OFDM SMs. Not applicable for PMP 450m. See EIRP OID.
1.3.6.1.4.1.161.19.3.3.2.23INTEGERread-writecurrent
bridgeEnable
OBJECT-TYPE
Disable or enable bridging functionality for a BH unit.
1.3.6.1.4.1.161.19.3.3.2.24INTEGER {enable(0), disable(1)}read-writecurrent
fecEnable
OBJECT-TYPE
Disable or enable FEC error correction functionality for multipoint units.
1.3.6.1.4.1.161.19.3.3.2.25INTEGER {disable(0), enable(1)}read-writecurrent
trapIP1
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap1.
1.3.6.1.4.1.161.19.3.3.2.26IpAddressread-writeobsolete
trapIP2
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap2.
1.3.6.1.4.1.161.19.3.3.2.27IpAddressread-writeobsolete
trapIP3
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap3.
1.3.6.1.4.1.161.19.3.3.2.28IpAddressread-writeobsolete
trapIP4
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap4.
1.3.6.1.4.1.161.19.3.3.2.29IpAddressread-writeobsolete
trapIP5
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap5.
1.3.6.1.4.1.161.19.3.3.2.30IpAddressread-writeobsolete
trapIP6
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap6.
1.3.6.1.4.1.161.19.3.3.2.31IpAddressread-writeobsolete
trapIP7
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap7.
1.3.6.1.4.1.161.19.3.3.2.32IpAddressread-writeobsolete
trapIP8
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap8.
1.3.6.1.4.1.161.19.3.3.2.33IpAddressread-writeobsolete
trapIP9
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap9.
1.3.6.1.4.1.161.19.3.3.2.34IpAddressread-writeobsolete
trapIP10
OBJECT-TYPE
Obsoleted. Configure with whispBoxDNS.trap10.
1.3.6.1.4.1.161.19.3.3.2.35IpAddressread-writeobsolete
commStringRWrite
OBJECT-TYPE
Read/Write Community string. This is a write-only OID.
1.3.6.1.4.1.161.19.3.3.2.36DisplayStringread-writecurrent
subnetMask
OBJECT-TYPE
Subnet mask for the management IP 1.
1.3.6.1.4.1.161.19.3.3.2.37INTEGERread-writecurrent
mngtIP
OBJECT-TYPE
Management IP address 1.
1.3.6.1.4.1.161.19.3.3.2.38IpAddressread-writecurrent
allowVIDAccess
OBJECT-TYPE
Allow or disallow local SM management VID access.
1.3.6.1.4.1.161.19.3.3.2.39INTEGER {enable(0), disable(1)}read-writecurrent
setDefaultPlug
OBJECT-TYPE
If enabled parameters are set to Factory Defaults upon default plug mode detection.
1.3.6.1.4.1.161.19.3.3.2.40INTEGER {disable(0), enable(1)}read-writecurrent
hwsCompatibility
OBJECT-TYPE
If enable, it ensures 6.0 compatibility with HWS.
1.3.6.1.4.1.161.19.3.3.2.41INTEGER {enable(0), disable(1)}read-writeobsolete
gpsInput
OBJECT-TYPE
Values 1, 2, 3 have been deprecated. (0) Generate AP sync signal. (1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync. (2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run. (3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run. (4) AutoSync. (5) AutoSync plus Free Run.
1.3.6.1.4.1.161.19.3.3.2.42INTEGER {generateSyncSignal(0), syncToReceivedSignalTimingPort(1), syncToReceivedSignalPowerPort(2), syncToiGPS(3), autoSync(4), autoSyncFreeRun(5)}read-writecurrent
ism
OBJECT-TYPE
Enable ISM on 5.7GHz frequency band radios.
1.3.6.1.4.1.161.19.3.3.2.43INTEGER {disable(0), enable(1)}read-writecurrent
hiPriority
OBJECT-TYPE
Enable Hi Priority Data Queue on BH radios.
1.3.6.1.4.1.161.19.3.3.2.44INTEGER {disable(0), enable(1)}read-writeobsolete
userName
OBJECT-TYPE
User name.To create read-only user set userMode OID first. Maximum of 4 users can exist in system.
1.3.6.1.4.1.161.19.3.3.2.45DisplayStringread-writecurrent
userPassword
OBJECT-TYPE
User password.To create read-only user set userMode OID first.
1.3.6.1.4.1.161.19.3.3.2.46DisplayStringread-writecurrent
userAccessLevel
OBJECT-TYPE
User access level.To create read-only user set userMode OID first. 1=TECH 2=INSTALL 3=ADMIN
1.3.6.1.4.1.161.19.3.3.2.47INTEGERread-writecurrent
deleteUser
OBJECT-TYPE
User name to remove.
1.3.6.1.4.1.161.19.3.3.2.48DisplayStringread-writecurrent
twoXRate
OBJECT-TYPE
To enable or disable double rate.
1.3.6.1.4.1.161.19.3.3.2.49INTEGER {disabled(0), enabled(1)}read-writeobsolete
lanDhcpState
OBJECT-TYPE
To enable or disable LAN Interface DHCP feature.
1.3.6.1.4.1.161.19.3.3.2.50INTEGER {disabled(0), enabled(1)}read-writecurrent
sessionTimeout
OBJECT-TYPE
Timer for Telnet, Web and FTP sessions.
1.3.6.1.4.1.161.19.3.3.2.51INTEGERread-writecurrent
vlanMemberSource
OBJECT-TYPE
Specified the VLAN member source to display. 0=configured, 1=active configuration. Note that this OID is internal to SNMP and is not available at the Web Interface.
1.3.6.1.4.1.161.19.3.3.2.52INTEGER {configured(0), active(1)}read-writecurrent
addCustomFreqList
OBJECT-TYPE
Add Custom Frequencies. The frequencies can be in a variety of units up to KHz. Frequencies can be added in a list separated by commas. Example: 3550, 356000, 3450001. A get will return the current custom frequency list. Max string length entered cannot exceed 128 character. Note if there is not enough room for all the frequencies none will be added. Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz.
1.3.6.1.4.1.161.19.3.3.2.53DisplayStringread-writecurrent
removeCustomFreqList
OBJECT-TYPE
Remove Custom Frequencies. The frequencies can be in a variety of units up to KHz. Frequencies can be removed in a list separated by commas. Example: 3550, 356000, 3450001. A get will return the current custom frequencies. Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz.
1.3.6.1.4.1.161.19.3.3.2.54DisplayStringread-writecurrent
allowColocation
OBJECT-TYPE
Allow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters.
1.3.6.1.4.1.161.19.3.3.2.55INTEGER {disable(0), enable(1)}read-writeobsolete
changeUsrPwd
OBJECT-TYPE
Allow to change the password of a given user of a given user. Usage: userName,password.
1.3.6.1.4.1.161.19.3.3.2.56DisplayStringread-writecurrent
mngtIP2
OBJECT-TYPE
Management IP address 2.
1.3.6.1.4.1.161.19.3.3.2.57IpAddressread-writecurrent
subnetMask2
OBJECT-TYPE
Subnet mask for the management IP 2.
1.3.6.1.4.1.161.19.3.3.2.58INTEGERread-writecurrent
mngtIP3
OBJECT-TYPE
Management IP address 3.
1.3.6.1.4.1.161.19.3.3.2.59IpAddressread-writecurrent
subnetMask3
OBJECT-TYPE
Subnet mask for the management IP 3.
1.3.6.1.4.1.161.19.3.3.2.60INTEGERread-writecurrent
mngtIP4
OBJECT-TYPE
Management IP address 4.
1.3.6.1.4.1.161.19.3.3.2.61IpAddressread-writecurrent
subnetMask4
OBJECT-TYPE
Subnet mask for the management IP 4.
1.3.6.1.4.1.161.19.3.3.2.62INTEGERread-writecurrent
mngtIP5
OBJECT-TYPE
Management IP address 5.
1.3.6.1.4.1.161.19.3.3.2.63IpAddressread-writecurrent
subnetMask5
OBJECT-TYPE
Subnet mask for the management IP 5.
1.3.6.1.4.1.161.19.3.3.2.64INTEGERread-writecurrent
mngtIP6
OBJECT-TYPE
Management IP address 6.
1.3.6.1.4.1.161.19.3.3.2.65IpAddressread-writecurrent
subnetMask6
OBJECT-TYPE
Subnet mask for the management IP 6.
1.3.6.1.4.1.161.19.3.3.2.66INTEGERread-writecurrent
mngtIP7
OBJECT-TYPE
Management IP address 7.
1.3.6.1.4.1.161.19.3.3.2.67IpAddressread-writecurrent
subnetMask7
OBJECT-TYPE
Subnet mask for the management IP 7.
1.3.6.1.4.1.161.19.3.3.2.68INTEGERread-writecurrent
mngtIP8
OBJECT-TYPE
Management IP address 8.
1.3.6.1.4.1.161.19.3.3.2.69IpAddressread-writecurrent
subnetMask8
OBJECT-TYPE
Subnet mask for the management IP 8.
1.3.6.1.4.1.161.19.3.3.2.70INTEGERread-writecurrent
mngtIP9
OBJECT-TYPE
Management IP address 9.
1.3.6.1.4.1.161.19.3.3.2.71IpAddressread-writecurrent
subnetMask9
OBJECT-TYPE
Subnet mask for the management IP 9.
1.3.6.1.4.1.161.19.3.3.2.72INTEGERread-writecurrent
mngtIP10
OBJECT-TYPE
Management IP address 10.
1.3.6.1.4.1.161.19.3.3.2.73IpAddressread-writecurrent
subnetMask10
OBJECT-TYPE
Subnet mask for the management IP 10.
1.3.6.1.4.1.161.19.3.3.2.74INTEGERread-writecurrent
bhvlanEnable
OBJECT-TYPE
To enable or disable VLAN for Backhaul Master/Slave.
1.3.6.1.4.1.161.19.3.3.2.75INTEGER {disable(0), enable(1)}read-writecurrent
lldpBroadcastEnable
OBJECT-TYPE
To enable Broadcast of LLDP message, if disabled LLDP uses multicast
1.3.6.1.4.1.161.19.3.3.2.76INTEGER {disable(0), enable(1)}read-writecurrent
regionCode
OBJECT-TYPE
Set Region Code for the Unit. Used the individual region[Region] OIDs instead.
1.3.6.1.4.1.161.19.3.3.2.77INTEGER {none(0), other(1), us(2), canada(3), europe(4), brazil(5), australia(6), russia(7), india(8), spain(9), indonesia(10), ireland(11)}read-writedeprecated
russiaRegion
OBJECT-TYPE
Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now.
1.3.6.1.4.1.161.19.3.3.2.78INTEGER {category1(1), category2(2), category3(3), category4(4)}read-writedeprecated
commStringROnly
OBJECT-TYPE
Set Read Only commnunity string.
1.3.6.1.4.1.161.19.3.3.2.79DisplayStringread-writecurrent
ethernetLinkSpeed
OBJECT-TYPE
Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds.
1.3.6.1.4.1.161.19.3.3.2.80INTEGER {forced10H(1), forced10F(2), auto10F-10H(3), forced100H(4), auto100H-10H(5), auto100H-10F-10H(7), forced100F(8), auto100F-100H(12), auto100F-100H-10H(13), auto100F-100H-10F-10H(15), auto1000F-100F-100H-10F-10H(63)}read-writecurrent
cyclicPrefix
OBJECT-TYPE
Cyclic Prefix value, for OFDM Radios only. Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 mode).
1.3.6.1.4.1.161.19.3.3.2.81INTEGER {one-quarter(0), one-eighth(1), one-sixteenth(2), one-quarter-one-eighth(3), one-quarter-one-sixteenth(4), one-eighth-one-sixteenth(5), one-quarter-one-eighth-one-sixteenth(6)}read-writecurrent
numberCustomFreq
OBJECT-TYPE
Number of custom frequencies added. There is a maximum of 100. For use on 3.5 GHz OFDM Radios only.
1.3.6.1.4.1.161.19.3.3.2.82INTEGERread-onlycurrent
channelBandwidth
OBJECT-TYPE
The current channel bandwidth in MHz. For use on OFDM Radios only. Obsoleted for MIMO SMs.
1.3.6.1.4.1.161.19.3.3.2.83DisplayStringread-onlycurrent
setDefaults
OBJECT-TYPE
Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0 will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting. Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID prior to reboot. As a security measure, this OID is only valid when the radio was booted in default plug mode. If the radio is not currently in default plug mode, then attempting to set this OID will fail.
1.3.6.1.4.1.161.19.3.3.2.84INTEGER {noChangeOrUndoFactoryDefaults(0), setToFactoryDefaults(1), factoryDefaultsSet-AwaitingReboot(2)}read-writecurrent
radioRateAdapt
OBJECT-TYPE
Rate adaptation parameter 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) 1: 1x/2x (FSK and SISO OFDM 16-QAM) Following are OFDM only: 2: 1x/2x/3x (SISO OFDM 64-QAM) 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only Following are MIMO OFDM only: 4: 1x MIMO-A (QPSK duplicated on both paths) 5: 1x/2x MIMO-B (QPSK on each path) 7: 1x/2x/4x MIMO-B (16-QAM on each path) 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path) 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path) 10: 1x/2x MIMO-A (16-QAM duplicated on both paths) 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths) 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths) For PMP 430 radios this applies to Downlink Rate Adapt only. Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios. For PMP 450 radios, write access for engineering use only.
1.3.6.1.4.1.161.19.3.3.2.85INTEGER {onex(0), onextwox(1), onextwoxthreex(2), onextwoxthreexfourx(3), onexmimo(4), onextwoxmimo(5), onextwoxfourx(7), onextwoxfourxsixx(8), onextwoxfourxsixxeightx(9), onextwoxmimoa(10), onextwoxthreexmimoa(11), onextwoxthreexfourxmimoa(12)}read-writecurrent
siteInfoViewable
OBJECT-TYPE
Enable non login users the ability to view Site Information
1.3.6.1.4.1.161.19.3.3.2.86INTEGER {disable(0), enable(1)}read-writecurrent
largeVCQ
OBJECT-TYPE
Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed.
1.3.6.1.4.1.161.19.3.3.2.87INTEGER {disable(0), enable(1)}read-writecurrent
latitude
OBJECT-TYPE
The latitude setting of this unit in decimal degrees.
1.3.6.1.4.1.161.19.3.3.2.88DisplayStringread-writecurrent
longitude
OBJECT-TYPE
The longitude setting of this unit in decimal degrees.
1.3.6.1.4.1.161.19.3.3.2.89DisplayStringread-writecurrent
height
OBJECT-TYPE
The height setting of this unit in meters.
1.3.6.1.4.1.161.19.3.3.2.90INTEGER (-2147483647..2147483647)read-writecurrent
bandwidth
OBJECT-TYPE
Radio bandwidth setting. Obsoleted for MIMO SMs. Instead for MIMO SMs use OID bandwidthScan.
1.3.6.1.4.1.161.19.3.3.2.91INTEGER {bandwidth5mhz(1), bandwidth7mhz(2), bandwidth10mhz(3), bandwidth15mhz(4), bandwidth20mhz(5), bandwidth30mhz(6), bandwidth40mhz(7)}read-writecurrent
dataScramblingMethod
OBJECT-TYPE
This OID is for OFDM only and is obsolete.
1.3.6.1.4.1.161.19.3.3.2.92INTEGER {legacyDataScrambling(0), r10DataScrambling(1)}read-onlyobsolete
portVID
OBJECT-TYPE
Backhaul Port VID (PVID).
1.3.6.1.4.1.161.19.3.3.2.93INTEGERread-writecurrent
radioRateAdaptUL
OBJECT-TYPE
Uplink Rate adaptation parameter 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) 1: 1x/2x (FSK and SISO OFDM 16-QAM) Following are OFDM only: 2: 1x/2x/3x (SISO OFDM 64-QAM) 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only Following are MIMO OFDM only: 4: 1x MIMO-A (QPSK duplicated on both paths) 5: 1x/2x MIMO-B (QPSK on each path) 7: 1x/2x/4x MIMO-B (16-QAM on each path) 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path) 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path) 10: 1x/2x MIMO-A (16-QAM duplicated on both paths) 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths) 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths) For PMP 430 radios this applies to Uplink Rate Adapt only. Use radioRateAdapt for setting downlink rate adapt on PMP 430 radios. For PMP 450 radios, engineering use only.
1.3.6.1.4.1.161.19.3.3.2.94INTEGER {onex(0), onextwox(1), onextwoxthreex(2), onextwoxthreexfourx(3), onexmimo(4), onextwoxmimo(5), onextwoxfourx(7), onextwoxfourxsixx(8), onextwoxfourxsixxeightx(9), onextwoxmimoa(10), onextwoxthreexmimoa(11), onextwoxthreexfourxmimoa(12)}read-writecurrent
providerVID
OBJECT-TYPE
Provider VID for QinQ VLAN.
1.3.6.1.4.1.161.19.3.3.2.95INTEGERread-writecurrent
mac1VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.96MacAddressread-writecurrent
mac1VIDMapVid
OBJECT-TYPE
VID for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.97INTEGER (1..4094)read-writecurrent
mac2VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.98MacAddressread-writecurrent
mac2VIDMapVid
OBJECT-TYPE
VID for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.99INTEGER (1..4094)read-writecurrent
mac3VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.100MacAddressread-writecurrent
mac3VIDMapVid
OBJECT-TYPE
VID for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.101INTEGER (1..4094)read-writecurrent
mac4VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.102MacAddressread-writecurrent
mac4VIDMapVid
OBJECT-TYPE
VID for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.103INTEGER (1..4094)read-writecurrent
mac5VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.104MacAddressread-writecurrent
mac5VIDMapVid
OBJECT-TYPE
VID for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.105INTEGER (1..4094)read-writecurrent
mac6VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.106MacAddressread-writecurrent
mac6VIDMapVid
OBJECT-TYPE
VID for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.107INTEGER (1..4094)read-writecurrent
mac7VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.108MacAddressread-writecurrent
mac7VIDMapVid
OBJECT-TYPE
VID for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.109INTEGER (1..4094)read-writecurrent
mac8VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.110MacAddressread-writecurrent
mac8VIDMapVid
OBJECT-TYPE
VID for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.111INTEGER (1..4094)read-writecurrent
mac9VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.112MacAddressread-writecurrent
mac9VIDMapVid
OBJECT-TYPE
VID for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.113INTEGER (1..4094)read-writecurrent
mac10VIDMapAddr
OBJECT-TYPE
MAC Address for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.114MacAddressread-writecurrent
mac10VIDMapVid
OBJECT-TYPE
VID for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.115INTEGER (1..4094)read-writecurrent
vlanPortType
OBJECT-TYPE
VLAN Port Type for VLAN interface. Default is Q.
1.3.6.1.4.1.161.19.3.3.2.116INTEGER {q(0), qinq(1)}read-writecurrent
vlanAcceptQinQFrames
OBJECT-TYPE
Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP.
1.3.6.1.4.1.161.19.3.3.2.117INTEGER {disable(0), enable(1)}read-writecurrent
whispWebUserAccessMode
OBJECT-TYPE
This variable selects if web page users for the radio should be authenticated locally or via a centralised remote Radius server
1.3.6.1.4.1.161.19.3.3.2.118INTEGER {local(0), remote(1), remotethenlocal(2)}read-writecurrent
usrAccountEnableAccounting
OBJECT-TYPE
Select the level of accounting information to be reported to the server
1.3.6.1.4.1.161.19.3.3.2.119INTEGER {disable(0), deviceAccess(1), dataUsage(2), all(3)}read-writecurrent
allowRejectThenLocal
OBJECT-TYPE
Control for allowing local authenication if the AAA remote server
1.3.6.1.4.1.161.19.3.3.2.120INTEGER {doNotAllowLocalAuthifAAAReject(0), allowLocalAuthIfAAAReject(1)}read-writecurrent
snrCalculation
OBJECT-TYPE
This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance.
1.3.6.1.4.1.161.19.3.3.2.121INTEGER {disable(0), enable(1)}read-writedeprecated
priorityPrecedence
OBJECT-TYPE
Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions.
1.3.6.1.4.1.161.19.3.3.2.122INTEGER {eight021pThenDiffServ(0), diffservThenEight021p(1)}read-writecurrent
installationColorCode
OBJECT-TYPE
Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled in order to facilitate remote provisioning.
1.3.6.1.4.1.161.19.3.3.2.123INTEGER {disabled(0), enabled(1)}read-writecurrent
apSmMode
OBJECT-TYPE
Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP. Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP.
1.3.6.1.4.1.161.19.3.3.2.124INTEGER {ap(0), sm(1)}read-writecurrent
pppoeFilter
OBJECT-TYPE
To set PPPoE packet filter.
1.3.6.1.4.1.161.19.3.3.2.125INTEGER {filterOff(0), filterOn(1)}read-writecurrent
smbFilter
OBJECT-TYPE
To set SMB packet filter.
1.3.6.1.4.1.161.19.3.3.2.126INTEGER {filterOff(0), filterOn(1)}read-writecurrent
snmpFilter
OBJECT-TYPE
To set SNMP packet filter.
1.3.6.1.4.1.161.19.3.3.2.127INTEGER {filterOff(0), filterOn(1)}read-writecurrent
userP1Filter
OBJECT-TYPE
To set user defined port 1 packet filter.
1.3.6.1.4.1.161.19.3.3.2.128INTEGER {filterOff(0), filterOn(1)}read-writecurrent
userP2Filter
OBJECT-TYPE
To set user defined port 2 packet filter.
1.3.6.1.4.1.161.19.3.3.2.129INTEGER {filterOff(0), filterOn(1)}read-writecurrent
userP3Filter
OBJECT-TYPE
To set user defined port 3 packet filter.
1.3.6.1.4.1.161.19.3.3.2.130INTEGER {filterOff(0), filterOn(1)}read-writecurrent
allOtherIpFilter
OBJECT-TYPE
To set all other IPv4 packet filter.
1.3.6.1.4.1.161.19.3.3.2.131INTEGER {filterOff(0), filterOn(1)}read-writecurrent
allIpv4Filter
OBJECT-TYPE
To set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All Other IPv4).
1.3.6.1.4.1.161.19.3.3.2.132INTEGER {filterOff(0), filterOn(1)}read-writecurrent
arpFilter
OBJECT-TYPE
To set ARP packet filter.
1.3.6.1.4.1.161.19.3.3.2.133INTEGER {filterOff(0), filterOn(1)}read-writecurrent
allOthersFilter
OBJECT-TYPE
To set all other packet filter when.
1.3.6.1.4.1.161.19.3.3.2.134INTEGER {filterOff(0), filterOn(1)}read-writecurrent
userDefinedPort1
OBJECT-TYPE
An integer value of number one user defined port. Range:0-65535
1.3.6.1.4.1.161.19.3.3.2.135INTEGERread-writecurrent
port1TCPFilter
OBJECT-TYPE
To set user defined port 1 TCP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.136INTEGER {filterOff(0), filterOn(1)}read-writecurrent
port1UDPFilter
OBJECT-TYPE
To set user defined port 1 UDP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.137INTEGER {filterOff(0), filterOn(1)}read-writecurrent
userDefinedPort2
OBJECT-TYPE
An integer value of number two user defined port. Range:0-65535
1.3.6.1.4.1.161.19.3.3.2.138INTEGERread-writecurrent
port2TCPFilter
OBJECT-TYPE
To set user defined port 2 TCP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.139INTEGER {filterOff(0), filterOn(1)}read-writecurrent
port2UDPFilter
OBJECT-TYPE
To set user defined port 2 UDP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.140INTEGER {filterOff(0), filterOn(1)}read-writecurrent
userDefinedPort3
OBJECT-TYPE
An integer value of number three user defined port. Range:0-65535
1.3.6.1.4.1.161.19.3.3.2.141INTEGERread-writecurrent
port3TCPFilter
OBJECT-TYPE
To set user defined port 3 TCP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.142INTEGER {filterOff(0), filterOn(1)}read-writecurrent
port3UDPFilter
OBJECT-TYPE
To set user defined port 3 UDP traffic filter.
1.3.6.1.4.1.161.19.3.3.2.143INTEGER {filterOff(0), filterOn(1)}read-writecurrent
bootpcFilter
OBJECT-TYPE
To set bootp client sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.144INTEGER {filterOff(0), filterOn(1)}read-writecurrent
bootpsFilter
OBJECT-TYPE
To set bootp server sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.145INTEGER {filterOff(0), filterOn(1)}read-writecurrent
ip4MultFilter
OBJECT-TYPE
To set IPv4 MultiCast packets filter when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.146INTEGER {filterOff(0), filterOn(1)}read-writecurrent
packetFilterDirection
OBJECT-TYPE
To set packet filter direction. Upstream is default.
1.3.6.1.4.1.161.19.3.3.2.147INTEGER {upstream(1), downstream(2)}read-writecurrent
encryptionConfig
OBJECT-TYPE
For supported radio, set the encryption algorithm to use. DES by default. Cannot be set if encryption is disabled.
1.3.6.1.4.1.161.19.3.3.2.148INTEGER {des(0), aes(1)}read-writecurrent
pppoeCtlPriority
OBJECT-TYPE
Prioritization of PPPoE Control packets.
1.3.6.1.4.1.161.19.3.3.2.149INTEGER {normal(0), high(1)}read-writecurrent
ftpPort
OBJECT-TYPE
Port used to for FTP. Default is 21.
1.3.6.1.4.1.161.19.3.3.2.150INTEGERread-writecurrent
httpPort
OBJECT-TYPE
Port used to for HTTP. Default is 80.
1.3.6.1.4.1.161.19.3.3.2.151INTEGERread-writecurrent
httpsPort
OBJECT-TYPE
Port used to for HTTPs. Default is 443.
1.3.6.1.4.1.161.19.3.3.2.152INTEGERread-writecurrent
snmpPort
OBJECT-TYPE
Port used to for SNMP. Default is 161.
1.3.6.1.4.1.161.19.3.3.2.153INTEGERread-writecurrent
snmpTrapPort
OBJECT-TYPE
Port used to for SNMP Traps. Default is 162.
1.3.6.1.4.1.161.19.3.3.2.154INTEGERread-writecurrent
webAccess
OBJECT-TYPE
This variable determines if only HTTP or HTTPs connection are allowed. 0: HTTP Only 1: HTTPs Only 2: HTTP and HTTPs Both
1.3.6.1.4.1.161.19.3.3.2.155INTEGER {http(0), https(1), http-and-https(2)}read-writecurrent
syslogDomainNameAppend
OBJECT-TYPE
Select whether to append the configured management domain name to the Syslog server name. For example, if dnsMgmtDomainName is set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'.
1.3.6.1.4.1.161.19.3.3.2.156INTEGER {disableDomain(0), appendDomain(1)}read-writecurrent
syslogServerAddr
OBJECT-TYPE
Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name
1.3.6.1.4.1.161.19.3.3.2.157DisplayStringread-writecurrent
syslogServerPort
OBJECT-TYPE
Listening port on the Syslog server. Default is 514.
1.3.6.1.4.1.161.19.3.3.2.158INTEGERread-writecurrent
syslogMinLevel
OBJECT-TYPE
Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted.
1.3.6.1.4.1.161.19.3.3.2.159INTEGER {fatal(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)}read-writecurrent
allIpv6Filter
OBJECT-TYPE
To set all IPv6 packet filter. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp, IPv6 Mcast, User Defined Ports, and All Other IPv6).
1.3.6.1.4.1.161.19.3.3.2.160INTEGER {filterOff(0), filterOn(1)}read-writecurrent
ipv6smbFilter
OBJECT-TYPE
To set IPv6 SMB packet filter.
1.3.6.1.4.1.161.19.3.3.2.161INTEGER {filterOff(0), filterOn(1)}read-writecurrent
ipv6snmpFilter
OBJECT-TYPE
To set IPv6 SNMP packet filter.
1.3.6.1.4.1.161.19.3.3.2.162INTEGER {filterOff(0), filterOn(1)}read-writecurrent
ipv6bootpcFilter
OBJECT-TYPE
To set IPv6 bootp client sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.163INTEGER {filterOff(0), filterOn(1)}read-writecurrent
ipv6bootpsFilter
OBJECT-TYPE
To set IPv6 bootp server sourced packets filter.
1.3.6.1.4.1.161.19.3.3.2.164INTEGER {filterOff(0), filterOn(1)}read-writecurrent
ipv6MultFilter
OBJECT-TYPE
To set IPv6 MultiCast packets filter when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.165INTEGER {filterOff(0), filterOn(1)}read-writecurrent
allOtherIpv6Filter
OBJECT-TYPE
To set all other IPv6 packet filter.
1.3.6.1.4.1.161.19.3.3.2.166INTEGER {filterOff(0), filterOn(1)}read-writecurrent
snmpStatus
OBJECT-TYPE
This variable determines SNMP operation mode. 1: Enable SNMPv2c only 2: Enable SNMPv3 only 3: Enable SNMPv2c and SNMPv3
1.3.6.1.4.1.161.19.3.3.2.167INTEGER {snmpv2only(1), snmpv3only(2), snmpv2-and-snmpv3(3)}read-writecurrent
telnetStatus
OBJECT-TYPE
This variable determines if Telnet to enabled or not. 0: Disable Telnet 1: Enable Telnet
1.3.6.1.4.1.161.19.3.3.2.168INTEGER {disabletelnet(0), enabletelnet(1)}read-writecurrent
ftpStatus
OBJECT-TYPE
This variable determines if FTP to enabled or not. 0: Disable FTP 1: Enable FTP
1.3.6.1.4.1.161.19.3.3.2.169INTEGER {disableftp(0), enableftp(1)}read-writecurrent
tftpStatus
OBJECT-TYPE
This variable determines if TFTP is enabled or not. 0: Disable TFTP 1: Enable TFTP
1.3.6.1.4.1.161.19.3.3.2.170INTEGER {disabletftp(0), enabletftp(1)}read-writecurrent
userMode
OBJECT-TYPE
User Mode 1=Read-Only 0=Read-Write(default).
1.3.6.1.4.1.161.19.3.3.2.171INTEGERread-writecurrent
tcpAckPriority
OBJECT-TYPE
Prioritize TCP ACK that are 64 bytes or less.
1.3.6.1.4.1.161.19.3.3.2.172INTEGER {disabled(0), enabled(1)}read-writecurrent
codePointSelect
OBJECT-TYPE
Codepoint Select.This represents the CodePoint Selection to be modified via Priority Select
1.3.6.1.4.1.161.19.3.3.2.173INTEGER {cp1(1), cp2(2), cp3(3), cp4(4), cp5(5), cp6(6), cp7(7), cp8(8), cp9(9), cp10(10), cp11(11), cp12(12), cp13(13), cp14(14), cp15(15), cp16(16), cp17(17), cp18(18), cp19(19), cp20(20), cp21(21), cp22(22), cp23(23), cp24(24), cp25(25), cp26(26), cp27(27), cp28(28), cp29(29), cp30(30), cp31(31), cp32(32), cp33(33), cp34(34), cp35(35), cp36(36), cp37(37), cp38(38), cp39(39), cp40(40), cp41(41), cp42(42), cp43(43), cp44(44), cp45(45), cp46(46), cp47(47), cp49(49), cp50(50), cp51(51), cp52(52), cp53(53), cp54(54), cp55(55), cp57(57), cp58(58), cp59(59), cp60(60), cp61(61), cp62(62), cp63(63)}read-writecurrent
prioritySelect
OBJECT-TYPE
Priority Select.The priority setting input for the CodePoint selected in CodePoint Select.
1.3.6.1.4.1.161.19.3.3.2.174INTEGER {p0(0), p1(1), p2(2), p3(3), p4(4), p5(5), p6(6), p7(7)}read-writecurrent
auxPortEnable
OBJECT-TYPE
Enable(1) or Disable(0) aux ethernet port on 450i radio
1.3.6.1.4.1.161.19.3.3.2.175INTEGER {disable(0), enable(1)}read-writecurrent
poeAuxEnable
OBJECT-TYPE
Enable(1) or Disable(0) aux ethernet port PoE on 450i radio
1.3.6.1.4.1.161.19.3.3.2.176INTEGER {disable(0), enable(1)}read-writecurrent
whispUsrAuth
OBJECT-TYPE
Select method for User Authentication.
1.3.6.1.4.1.161.19.3.3.2.177INTEGER {md5(0), peap-mschapv2(1)}read-writecurrent
lan1DhcpRelease
OBJECT-TYPE
Setting the variable to '1' will release LAN1's IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.201INTEGER {releaseIP(1)}read-writecurrent
lan1DhcpRenew
OBJECT-TYPE
Setting the variable to '1' will renew LAN1's lease time for its current IP address. Applicable only when NAT is disabled.
1.3.6.1.4.1.161.19.3.3.2.202INTEGER {renewIP(1)}read-writecurrent
lan3DhcpRelease
OBJECT-TYPE
Setting the variable to '1' will release LAN3's (RF Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.203INTEGER {releaseIP(1)}read-writecurrent
lan3DhcpRenew
OBJECT-TYPE
Setting the variable to '1' will renew LAN3's (RF Public) lease time for its current IP address. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.204INTEGER {renewIP(1)}read-writecurrent
natDhcpRelease
OBJECT-TYPE
Setting the variable to '1' will release WAN's (NAT Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.205INTEGER {releaseIP(1)}read-writecurrent
natDhcpRenew
OBJECT-TYPE
Setting the variable to '1' will renew WAN's (NAT Public) lease time for its current IP address. Applicable only when NAT is enabled.
1.3.6.1.4.1.161.19.3.3.2.206INTEGER {renewIP(1)}read-writecurrent
region
OBJECT-TYPE
Set Region Code for the Unit.
1.3.6.1.4.1.161.19.3.3.2.207INTEGER {none(0), otherRegulatory(1), northAmerica(2), europe(3), southAmerica(4), oceania(5), asia(6), africa(7)}read-onlycurrent
regionAsia
OBJECT-TYPE
Country Code for Asia.
1.3.6.1.4.1.161.19.3.3.2.208INTEGER {none(0), india(2), indonesia(3), russiacategory1(4), russiacategory2(5), russiacategory3(6), russiacategory4(7), vietnam(8), malaysia(10), pakistan(11)}read-writecurrent
regionEurope
OBJECT-TYPE
Country Code for Europe. Other is only available for units with EU Region Lock.
1.3.6.1.4.1.161.19.3.3.2.209INTEGER {none(0), other(1), spain(2), ireland(3), denmark(4), finland(5), germany(6), greece(7), iceland(8), liechtenstein(9), norway(10), portugal(11), switzerland(12), serbia(13), unitedkingdom(14)}read-writecurrent
regionNorthAmerica
OBJECT-TYPE
Country Code for North America.
1.3.6.1.4.1.161.19.3.3.2.210INTEGER {none(0), unitedStates(2), canada(3), mexico(4), puertoRico(5)}read-writecurrent
regionOceania
OBJECT-TYPE
Country Code for Oceania.
1.3.6.1.4.1.161.19.3.3.2.211INTEGER {none(0), australia(2), newZealand(3)}read-writecurrent
regionSouthAmerica
OBJECT-TYPE
Country Code for South America.
1.3.6.1.4.1.161.19.3.3.2.212INTEGER {none(0), brazil(2), ecuador(3), colombia(4), venezuela(5), panama(6)}read-writecurrent
regionOtherRegulatory
OBJECT-TYPE
Regulatory setting for governing regulatory body.
1.3.6.1.4.1.161.19.3.3.2.213INTEGER {none(0), other(1), fcc(2), etsi(3), etsilbt(4)}read-writecurrent
interleave
OBJECT-TYPE
Engineering use only.
1.3.6.1.4.1.161.19.3.3.2.214INTEGER {default(0), disabled(1), enabled(2)}read-writecurrent
receiveQualityDebug
OBJECT-TYPE
Enable or disable receive quality calculations for every packet. Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH. Default to disabled for all radios. Only applicable to GenII OFDM products and up.
1.3.6.1.4.1.161.19.3.3.2.215INTEGER {disable(0), enable(1)}read-writecurrent
apType
OBJECT-TYPE
In standard mode, all possible sync sources will be made availble and usedfor autoSync operation. In remote mode, sync over power port will not be available as a sync source. Remote Device mode is where the AP or BHM timing port is connected to an SM or BHS timing port via a sync cable. In this mode, GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other sync over power device is in use, then select standard mode. This should really be named deviceType because this applies to both AP and BHM, but left this as apType for legacy purposes.
1.3.6.1.4.1.161.19.3.3.2.216INTEGER {standard(0), remote(1)}read-writecurrent
regionAfrica
OBJECT-TYPE
Country Code for Africa.
1.3.6.1.4.1.161.19.3.3.2.217INTEGER {none(0), algeria(2), nigeria(3)}read-writecurrent
addCustomFreqMimo
OBJECT-TYPE
Frequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'.
1.3.6.1.4.1.161.19.3.3.2.218DisplayStringread-writecurrent
removeCustomFreqMimo
OBJECT-TYPE
Frequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'.
1.3.6.1.4.1.161.19.3.3.2.219DisplayStringread-writecurrent
timedSpectrumAnalysisDurationBox
OBJECT-TYPE
Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds.
1.3.6.1.4.1.161.19.3.3.2.220INTEGER (10..1000)read-writecurrent
spectrumAnalysisActionBox
OBJECT-TYPE
Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis Note: AP/BHM will run Spectrum Analysis for the sector. (2) - Start Continuous Spectrum Analysis (3) - Idle, no Spectrum Analysis results. (4) - Idle, Spectrum Analysis results available. (5) - Timed or Remote Spectrum Analysis in progress. (6) - Continuous Spectrum Analysis in progress. Note: Continuous mode has a max of 24 hours. (7) - Spectrum Analyzer not ready.
1.3.6.1.4.1.161.19.3.3.2.221INTEGER {stopSpectrumAnalysis(0), startTimedSpectrumAnalysis(1), startContinuousSpectrumAnalysis(2), idleNoSpectrumAnalysis(3), idleCompleteSpectrumAnalysis(4), inProgressTimedSpectrumAnalysis(5), inProgressContinuousSpectrumAnalysis(6), notReady(7)}read-writecurrent
mac1VIDMapPriority
OBJECT-TYPE
VID priority for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.222INTEGER (0..7)read-writecurrent
mac1VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 1 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.223INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac2VIDMapPriority
OBJECT-TYPE
VID priority for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.224INTEGER (0..7)read-writecurrent
mac2VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 2 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.225INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac3VIDMapPriority
OBJECT-TYPE
VID priority for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.226INTEGER (0..7)read-writecurrent
mac3VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 3 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.227INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac4VIDMapPriority
OBJECT-TYPE
VID priority for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.228INTEGER (0..7)read-writecurrent
mac4VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 4 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.229INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac5VIDMapPriority
OBJECT-TYPE
VID priority for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.230INTEGER (0..7)read-writecurrent
mac5VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 5 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.231INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac6VIDMapPriority
OBJECT-TYPE
VID priority for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.232INTEGER (0..7)read-writecurrent
mac6VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 6 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.233INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac7VIDMapPriority
OBJECT-TYPE
VID priority for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.234INTEGER (0..7)read-writecurrent
mac7VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 7 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.235INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac8VIDMapPriority
OBJECT-TYPE
VID priority for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.236INTEGER (0..7)read-writecurrent
mac8VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 8 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.237INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac9VIDMapPriority
OBJECT-TYPE
VID priority for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.238INTEGER (0..7)read-writecurrent
mac9VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 9 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.239INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
mac10VIDMapPriority
OBJECT-TYPE
VID priority for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.240INTEGER (0..7)read-writecurrent
mac10VIDMapPriorityMode
OBJECT-TYPE
VID priority Mode for Entry 10 in MAC Address VID Mapping Table.
1.3.6.1.4.1.161.19.3.3.2.241INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
managementVIDPriority
OBJECT-TYPE
management VID VID VLAN Priority.
1.3.6.1.4.1.161.19.3.3.2.242INTEGER (0..7)read-writecurrent
managementVIDPriorityMode
OBJECT-TYPE
management VID VLAN Priority Mode.
1.3.6.1.4.1.161.19.3.3.2.243INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
remarkSrcVID
OBJECT-TYPE
Source VID to apply remarking on.
1.3.6.1.4.1.161.19.3.3.2.244INTEGER (1..4094)read-writecurrent
addRemarkVID
OBJECT-TYPE
Add VLAN ID re-marking entry.
1.3.6.1.4.1.161.19.3.3.2.245INTEGER (1..4094)read-writecurrent
addRemarkPriority
OBJECT-TYPE
Add 802.1p re-mark entry.
1.3.6.1.4.1.161.19.3.3.2.246INTEGER (0..7)read-writecurrent
deleteRemarkVID
OBJECT-TYPE
Remove the VID re-marking for this source VID.
1.3.6.1.4.1.161.19.3.3.2.247INTEGER (1..4094)read-writecurrent
deleteRemarkPriority
OBJECT-TYPE
Remove the priority re-marking for this source VID.
1.3.6.1.4.1.161.19.3.3.2.248INTEGER (1..4094)read-writecurrent
mimoRateAdaptAlgorithm
OBJECT-TYPE
Engineering use only. Control MIMO Rate Adapt Algorithm 0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput 1 = MIMO-B only 2 = MIMO-A only 3 = SISO only
1.3.6.1.4.1.161.19.3.3.2.249INTEGER {mimobmimoa(0), mimobonly(1), mimoaonly(2), siso(3)}read-writecurrent
controlMessages
OBJECT-TYPE
Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m.
1.3.6.1.4.1.161.19.3.3.2.250INTEGER {mimoa(0), siso(1)}read-writecurrent
enableSecurityBanner
OBJECT-TYPE
Shows Security Banner at the time of login
1.3.6.1.4.1.161.19.3.3.2.251INTEGER {disable(0), enable(1)}read-writecurrent
vcDepth
OBJECT-TYPE
VC Depth of radio. Not applicable with 450m. Engineering use only.
1.3.6.1.4.1.161.19.3.3.2.252INTEGER {default(0), eight(8), sixteen(16), thirty-two(32), sixty-four(64), one-two-eight(128)}read-writecurrent
textSecurityBanner
OBJECT-TYPE
Security Banner to be dispalyed on login page. Length should be maximum 1200 characters.Configuration from web UI can enter upto 1499 characters. Only ASCII characters(0-9a-zA-Z,CR,LF) supported.
1.3.6.1.4.1.161.19.3.3.2.253DisplayStringread-writecurrent
acceptSecurityBanner
OBJECT-TYPE
1: User must accept and acknowledge security banner before login. 0: Accepting security banner is not mandatory and user can login without it.
1.3.6.1.4.1.161.19.3.3.2.254INTEGER {disable(0), enable(1)}read-writecurrent
poeT2Classification
OBJECT-TYPE
When disabled, the radio will ignore the 802.3at Type 2 classification. When enabled, if 802.3at Type 2 PoE is not present, the board will start and log the problem but the transmitter and PoE out will not be enabled due to the low input power. This is only available on the 450i.
1.3.6.1.4.1.161.19.3.3.2.255INTEGER {disabled(0), enabled(1)}read-writecurrent
simulatedAirDelay
OBJECT-TYPE
Simulated Air Delay. Engineering use only.
1.3.6.1.4.1.161.19.3.3.2.256INTEGER (0..65535)read-writecurrent
cnMaestroEnable
OBJECT-TYPE
Enable Remote management using cnMaestro.
1.3.6.1.4.1.161.19.3.3.2.257INTEGER {disable(0), enable(1)}read-writecurrent
cnMaestroUrl
OBJECT-TYPE
cnMaestro Server URL.
1.3.6.1.4.1.161.19.3.3.2.258DisplayStringread-writecurrent
camID
OBJECT-TYPE
Cambium Id for cnMaestro onboarding.
1.3.6.1.4.1.161.19.3.3.2.259DisplayStringread-writecurrent
camOnboardKey
OBJECT-TYPE
Onboarding key for cnMaestro onboarding.
1.3.6.1.4.1.161.19.3.3.2.260DisplayStringread-writecurrent
atexHazlocPowerLimit
OBJECT-TYPE
If radio is keyed for ATEX/HazLoc operation, these settings can be used to limit maximum power output, per Gas Group specs.
1.3.6.1.4.1.161.19.3.3.2.261INTEGER {gasGroupA(0), gasGroupB(1), gasGroupC(2), gasGroupD(3)}read-writecurrent
nearFieldRange
OBJECT-TYPE
Range in feet for near field operation. This is applied only when nearFieldOperation is set to enable(1) and eirp is 22dBm or below or when Engineering keyed. The maximum range of 3000ft applies negligible correction. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.2.262INTEGER (6..3000)read-writecurrent
nearFieldOperation
OBJECT-TYPE
Enables operation in the near field. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.2.263INTEGER {disable(0), enable(1)}read-writecurrent
defaultIPAccessEnable
OBJECT-TYPE
Enable(1) or Disable(0) Default alternative LAN1 IP address
1.3.6.1.4.1.161.19.3.3.2.264INTEGER {disable(0), enable(1)}read-writecurrent
pingWdogEnable
OBJECT-TYPE
enable(1) or disable(0) ping watchdog.
1.3.6.1.4.1.161.19.3.3.2.265INTEGER {disable(0), enable(1)}read-writecurrent
pingWdogIP
OBJECT-TYPE
IPv4 address to ping in dotted decimal notation.
1.3.6.1.4.1.161.19.3.3.2.266IpAddressread-writecurrent
pingWdogInterval
OBJECT-TYPE
Intervals in seconds at which ping should be initiated.
1.3.6.1.4.1.161.19.3.3.2.267INTEGER (300..86400)read-writecurrent
pingWdogRbtCnt
OBJECT-TYPE
Ping Failures count at which reboot should be initiated.
1.3.6.1.4.1.161.19.3.3.2.268INTEGER (1..100)read-writecurrent
forceReassessment
OBJECT-TYPE
Forces channel reassessment for all registered SMs. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. MU-MIMO only.
1.3.6.1.4.1.161.19.3.3.2.275INTEGER {disable(0), enable(1)}read-writecurrent
ethernetPortSelection
OBJECT-TYPE
Set/Get the Ethernet port used to bridge traffic. PMP 450m only.
1.3.6.1.4.1.161.19.3.3.2.278INTEGER {mainPort(0), sfpPort(1)}read-writecurrent
ethernetLinkSpeedSfp
OBJECT-TYPE
Set/Get Ethernet link speed and duplex settings of the SFP port. PMP 450m only. Please note that the Radio Recovery Console only supports auto1000F for the SFP.
1.3.6.1.4.1.161.19.3.3.2.279INTEGER {auto1000FX(32), auto1000F-100F(40), forced1000FX(64), auto2500F-1000F-100F(168)}read-writecurrent
whispBoxControls
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.3
saveFlash
OBJECT-TYPE
This variable is currently deprecated.
1.3.6.1.4.1.161.19.3.3.3.1INTEGER {doNotSaveToFlash(0), saveToFlash(1)}read-writeobsolete
reboot
OBJECT-TYPE
Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. Setting the variable to 2 will perform a full reboot of a 450i radio, while performing a normal reboot on other radios.
1.3.6.1.4.1.161.19.3.3.3.2INTEGER {finishedReboot(0), reboot(1), fullReboot(2)}read-writecurrent
clearEventLog
OBJECT-TYPE
Setting the variable to 1 will clear the event log.
1.3.6.1.4.1.161.19.3.3.3.3INTEGER {notClear(0), clear(1)}read-writecurrent
rebootIfRequired
OBJECT-TYPE
Setting the variable to 1 will reboot the unit if reboot is required.
1.3.6.1.4.1.161.19.3.3.3.4INTEGER {rebootNotRequired(0), rebootRequired(1)}read-writecurrent
clearBERStats
OBJECT-TYPE
Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats' When action is complete.
1.3.6.1.4.1.161.19.3.3.3.5INTEGER {doNotClearBERStats(0), clearBERStats(1)}read-writecurrent
updateDevice
OBJECT-TYPE
Use to update the software on the device
1.3.6.1.4.1.161.19.3.3.3.6INTEGER {disable(0), enable(1)}read-writecurrent
importConfigFile
OBJECT-TYPE
Set to URL to immediately download and apply configuration file
1.3.6.1.4.1.161.19.3.3.3.7DisplayStringread-writecurrent
exportConfigFile
OBJECT-TYPE
Set to URL to immediately export and upload configuration file
1.3.6.1.4.1.161.19.3.3.3.8DisplayStringread-writecurrent
undoUnitWideSavedChanges
OBJECT-TYPE
Setting to 1 will undo unit wide saved changes
1.3.6.1.4.1.161.19.3.3.3.9INTEGER {undoUnitWideSavedChanges(1)}read-writecurrent
resetPoEAux
OBJECT-TYPE
Setting to 1 will reset aux ethernet port PoE on 450i radio. Port will be powered off for 2 seconds during the set call, which will delay the SNMP response.
1.3.6.1.4.1.161.19.3.3.3.10INTEGER {reset(1)}read-writecurrent
whispBoxBridgeTable
OBJECT-TYPE
Bridge table.
1.3.6.1.4.1.161.19.3.3.4not-accessiblecurrent
whispBoxBridgeEntry
OBJECT-TYPE
Bridge entry.
1.3.6.1.4.1.161.19.3.3.4.1not-accessiblecurrent
whispBridgeMacAddr
OBJECT-TYPE
MAC Address of the registered entity.
1.3.6.1.4.1.161.19.3.3.4.1.1MacAddressread-onlycurrent
whispBridgeDesLuid
OBJECT-TYPE
This is the Local Unit Identifier assigned to Subscriber Modems.
1.3.6.1.4.1.161.19.3.3.4.1.2WhispLUIDread-onlycurrent
whispBridgeAge
OBJECT-TYPE
Table entry last access age in minutes.
1.3.6.1.4.1.161.19.3.3.4.1.3INTEGERread-onlycurrent
whispBridgeExt
OBJECT-TYPE
Timeout extension flag for entries which also reside in the PNA APR cache.
1.3.6.1.4.1.161.19.3.3.4.1.4INTEGERread-onlycurrent
whispBridgeHash
OBJECT-TYPE
Hash table array index.
1.3.6.1.4.1.161.19.3.3.4.1.5INTEGERread-onlycurrent
whispBridgeCAM
OBJECT-TYPE
This entry is deprecated.
1.3.6.1.4.1.161.19.3.3.4.1.6INTEGERread-onlyobsolete
whispBoxEventLog
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.5
whispBoxEvntLog
OBJECT-TYPE
Event log for AP and SM.
1.3.6.1.4.1.161.19.3.3.5.1EventStringread-onlycurrent
whispBoxConf
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.6
whispBoxGroups
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.6.1
whispBoxBridgeVar
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.7
whispBridgeTbUsed
OBJECT-TYPE
Number of used entries in bridging table.
1.3.6.1.4.1.161.19.3.3.7.1INTEGERread-onlycurrent
whispBridgeTbFree
OBJECT-TYPE
Number of free entries in bridging table.
1.3.6.1.4.1.161.19.3.3.7.2INTEGERread-onlycurrent
whispBridgeTbErr
OBJECT-TYPE
Bridging table errors.
1.3.6.1.4.1.161.19.3.3.7.3INTEGERread-onlycurrent
whispVLANTable
OBJECT-TYPE
VLAN member table.
1.3.6.1.4.1.161.19.3.3.8not-accessiblecurrent
whispVLANEntry
OBJECT-TYPE
VLAN entry.
1.3.6.1.4.1.161.19.3.3.8.1not-accessiblecurrent
whispVID
OBJECT-TYPE
VLAN member ID.
1.3.6.1.4.1.161.19.3.3.8.1.1INTEGER (1..4095)read-onlycurrent
whispVType
OBJECT-TYPE
VLAN member type.
1.3.6.1.4.1.161.19.3.3.8.1.2DisplayStringread-onlycurrent
whispVAge
OBJECT-TYPE
VLAN member age.
1.3.6.1.4.1.161.19.3.3.8.1.3INTEGERread-onlycurrent
whispBoxCPVar
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.9
codePoint0
OBJECT-TYPE
Code Point 0.
1.3.6.1.4.1.161.19.3.3.9.1INTEGERread-onlycurrent
codePoint1
OBJECT-TYPE
Code Point 1.
1.3.6.1.4.1.161.19.3.3.9.2INTEGERread-writecurrent
codePoint2
OBJECT-TYPE
Code Point 2.
1.3.6.1.4.1.161.19.3.3.9.3INTEGERread-writecurrent
codePoint3
OBJECT-TYPE
Code Point 3.
1.3.6.1.4.1.161.19.3.3.9.4INTEGERread-writecurrent
codePoint4
OBJECT-TYPE
Code Point 4.
1.3.6.1.4.1.161.19.3.3.9.5INTEGERread-writecurrent
codePoint5
OBJECT-TYPE
Code Point 5.
1.3.6.1.4.1.161.19.3.3.9.6INTEGERread-writecurrent
codePoint6
OBJECT-TYPE
Code Point 6.
1.3.6.1.4.1.161.19.3.3.9.7INTEGERread-writecurrent
codePoint7
OBJECT-TYPE
Code Point 7.
1.3.6.1.4.1.161.19.3.3.9.8INTEGERread-writecurrent
codePoint8
OBJECT-TYPE
Code Point 8.
1.3.6.1.4.1.161.19.3.3.9.9INTEGERread-writecurrent
codePoint9
OBJECT-TYPE
Code Point 9.
1.3.6.1.4.1.161.19.3.3.9.10INTEGERread-writecurrent
codePoint10
OBJECT-TYPE
Code Point 10.
1.3.6.1.4.1.161.19.3.3.9.11INTEGERread-writecurrent
codePoint11
OBJECT-TYPE
Code Point 11.
1.3.6.1.4.1.161.19.3.3.9.12INTEGERread-writecurrent
codePoint12
OBJECT-TYPE
Code Point 12.
1.3.6.1.4.1.161.19.3.3.9.13INTEGERread-writecurrent
codePoint13
OBJECT-TYPE
Code Point 13.
1.3.6.1.4.1.161.19.3.3.9.14INTEGERread-writecurrent
codePoint14
OBJECT-TYPE
Code Point 14.
1.3.6.1.4.1.161.19.3.3.9.15INTEGERread-writecurrent
codePoint15
OBJECT-TYPE
Code Point 15.
1.3.6.1.4.1.161.19.3.3.9.16INTEGERread-writecurrent
codePoint16
OBJECT-TYPE
Code Point 16.
1.3.6.1.4.1.161.19.3.3.9.17INTEGERread-writecurrent
codePoint17
OBJECT-TYPE
Code Point 17.
1.3.6.1.4.1.161.19.3.3.9.18INTEGERread-writecurrent
codePoint18
OBJECT-TYPE
Code Point 18.
1.3.6.1.4.1.161.19.3.3.9.19INTEGERread-writecurrent
codePoint19
OBJECT-TYPE
Code Point 19.
1.3.6.1.4.1.161.19.3.3.9.20INTEGERread-writecurrent
codePoint20
OBJECT-TYPE
Code Point 20.
1.3.6.1.4.1.161.19.3.3.9.21INTEGERread-writecurrent
codePoint21
OBJECT-TYPE
Code Point 21.
1.3.6.1.4.1.161.19.3.3.9.22INTEGERread-writecurrent
codePoint22
OBJECT-TYPE
Code Point 22.
1.3.6.1.4.1.161.19.3.3.9.23INTEGERread-writecurrent
codePoint23
OBJECT-TYPE
Code Point 23.
1.3.6.1.4.1.161.19.3.3.9.24INTEGERread-writecurrent
codePoint24
OBJECT-TYPE
Code Point 24.
1.3.6.1.4.1.161.19.3.3.9.25INTEGERread-writecurrent
codePoint25
OBJECT-TYPE
Code Point 25.
1.3.6.1.4.1.161.19.3.3.9.26INTEGERread-writecurrent
codePoint26
OBJECT-TYPE
Code Point 26.
1.3.6.1.4.1.161.19.3.3.9.27INTEGERread-writecurrent
codePoint27
OBJECT-TYPE
Code Point 27.
1.3.6.1.4.1.161.19.3.3.9.28INTEGERread-writecurrent
codePoint28
OBJECT-TYPE
Code Point 28.
1.3.6.1.4.1.161.19.3.3.9.29INTEGERread-writecurrent
codePoint29
OBJECT-TYPE
Code Point 29.
1.3.6.1.4.1.161.19.3.3.9.30INTEGERread-writecurrent
codePoint30
OBJECT-TYPE
Code Point 30.
1.3.6.1.4.1.161.19.3.3.9.31INTEGERread-writecurrent
codePoint31
OBJECT-TYPE
Code Point 31.
1.3.6.1.4.1.161.19.3.3.9.32INTEGERread-writecurrent
codePoint32
OBJECT-TYPE
Code Point 32.
1.3.6.1.4.1.161.19.3.3.9.33INTEGERread-writecurrent
codePoint33
OBJECT-TYPE
Code Point 33.
1.3.6.1.4.1.161.19.3.3.9.34INTEGERread-writecurrent
codePoint34
OBJECT-TYPE
Code Point 34.
1.3.6.1.4.1.161.19.3.3.9.35INTEGERread-writecurrent
codePoint35
OBJECT-TYPE
Code Point 35.
1.3.6.1.4.1.161.19.3.3.9.36INTEGERread-writecurrent
codePoint36
OBJECT-TYPE
Code Point 36.
1.3.6.1.4.1.161.19.3.3.9.37INTEGERread-writecurrent
codePoint37
OBJECT-TYPE
Code Point 37.
1.3.6.1.4.1.161.19.3.3.9.38INTEGERread-writecurrent
codePoint38
OBJECT-TYPE
Code Point 38.
1.3.6.1.4.1.161.19.3.3.9.39INTEGERread-writecurrent
codePoint39
OBJECT-TYPE
Code Point 39.
1.3.6.1.4.1.161.19.3.3.9.40INTEGERread-writecurrent
codePoint40
OBJECT-TYPE
Code Point 40.
1.3.6.1.4.1.161.19.3.3.9.41INTEGERread-writecurrent
codePoint41
OBJECT-TYPE
Code Point 41.
1.3.6.1.4.1.161.19.3.3.9.42INTEGERread-writecurrent
codePoint42
OBJECT-TYPE
Code Point 42.
1.3.6.1.4.1.161.19.3.3.9.43INTEGERread-writecurrent
codePoint43
OBJECT-TYPE
Code Point 43.
1.3.6.1.4.1.161.19.3.3.9.44INTEGERread-writecurrent
codePoint44
OBJECT-TYPE
Code Point 44.
1.3.6.1.4.1.161.19.3.3.9.45INTEGERread-writecurrent
codePoint45
OBJECT-TYPE
Code Point 45.
1.3.6.1.4.1.161.19.3.3.9.46INTEGERread-writecurrent
codePoint46
OBJECT-TYPE
Code Point 46.
1.3.6.1.4.1.161.19.3.3.9.47INTEGERread-writecurrent
codePoint47
OBJECT-TYPE
Code Point 47.
1.3.6.1.4.1.161.19.3.3.9.48INTEGERread-writecurrent
codePoint48
OBJECT-TYPE
Code Point 48.
1.3.6.1.4.1.161.19.3.3.9.49INTEGERread-onlycurrent
codePoint49
OBJECT-TYPE
Code Point 49.
1.3.6.1.4.1.161.19.3.3.9.50INTEGERread-writecurrent
codePoint50
OBJECT-TYPE
Code Point 50.
1.3.6.1.4.1.161.19.3.3.9.51INTEGERread-writecurrent
codePoint51
OBJECT-TYPE
Code Point 51.
1.3.6.1.4.1.161.19.3.3.9.52INTEGERread-writecurrent
codePoint52
OBJECT-TYPE
Code Point 52.
1.3.6.1.4.1.161.19.3.3.9.53INTEGERread-writecurrent
codePoint53
OBJECT-TYPE
Code Point 53.
1.3.6.1.4.1.161.19.3.3.9.54INTEGERread-writecurrent
codePoint54
OBJECT-TYPE
Code Point 54.
1.3.6.1.4.1.161.19.3.3.9.55INTEGERread-writecurrent
codePoint55
OBJECT-TYPE
Code Point 55.
1.3.6.1.4.1.161.19.3.3.9.56INTEGERread-writecurrent
codePoint56
OBJECT-TYPE
Code Point 56.
1.3.6.1.4.1.161.19.3.3.9.57INTEGERread-onlycurrent
codePoint57
OBJECT-TYPE
Code Point 57.
1.3.6.1.4.1.161.19.3.3.9.58INTEGERread-writecurrent
codePoint58
OBJECT-TYPE
Code Point 58.
1.3.6.1.4.1.161.19.3.3.9.59INTEGERread-writecurrent
codePoint59
OBJECT-TYPE
Code Point 59.
1.3.6.1.4.1.161.19.3.3.9.60INTEGERread-writecurrent
codePoint60
OBJECT-TYPE
Code Point 60.
1.3.6.1.4.1.161.19.3.3.9.61INTEGERread-writecurrent
codePoint61
OBJECT-TYPE
Code Point 61.
1.3.6.1.4.1.161.19.3.3.9.62INTEGERread-writecurrent
codePoint62
OBJECT-TYPE
Code Point 62.
1.3.6.1.4.1.161.19.3.3.9.63INTEGERread-writecurrent
codePoint63
OBJECT-TYPE
Code Point 63.
1.3.6.1.4.1.161.19.3.3.9.64INTEGERread-writecurrent
whispUserTable
OBJECT-TYPE
User information table.
1.3.6.1.4.1.161.19.3.3.10not-accessiblecurrent
whispUserEntry
OBJECT-TYPE
User entry.
1.3.6.1.4.1.161.19.3.3.10.1not-accessiblecurrent
entryIndex
OBJECT-TYPE
User information table index.
1.3.6.1.4.1.161.19.3.3.10.1.1INTEGER (1..5)read-onlycurrent
userLoginName
OBJECT-TYPE
User name.
1.3.6.1.4.1.161.19.3.3.10.1.2DisplayStringread-onlycurrent
userPswd
OBJECT-TYPE
User password.
1.3.6.1.4.1.161.19.3.3.10.1.3DisplayStringread-onlycurrent
accessLevel
OBJECT-TYPE
User access level.
1.3.6.1.4.1.161.19.3.3.10.1.4INTEGERread-onlycurrent
loginStatus
OBJECT-TYPE
User current status.
1.3.6.1.4.1.161.19.3.3.10.1.5INTEGERread-onlycurrent
loginMethod
OBJECT-TYPE
User login method.
1.3.6.1.4.1.161.19.3.3.10.1.6INTEGERread-onlycurrent
sessionTime
OBJECT-TYPE
Users logged in session time.
1.3.6.1.4.1.161.19.3.3.10.1.7INTEGERread-onlycurrent
whispLayer2NeighborTable
OBJECT-TYPE
Neighbor information table.
1.3.6.1.4.1.161.19.3.3.11not-accessiblecurrent
whispLayer2NeighborEntry
OBJECT-TYPE
Neighbor Entry.
1.3.6.1.4.1.161.19.3.3.11.1not-accessiblecurrent
entryL2Index
OBJECT-TYPE
Neighbor information table index.
1.3.6.1.4.1.161.19.3.3.11.1.1INTEGER (1..20)read-onlycurrent
neighborMAC
OBJECT-TYPE
Neighbor MAC.
1.3.6.1.4.1.161.19.3.3.11.1.2DisplayStringread-onlycurrent
neighborIP
OBJECT-TYPE
Neighbor IP.
1.3.6.1.4.1.161.19.3.3.11.1.3DisplayStringread-onlycurrent
neighborSiteName
OBJECT-TYPE
Neighbor Site Name.
1.3.6.1.4.1.161.19.3.3.11.1.4DisplayStringread-onlycurrent
whispBoxEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.12
whispBoxDHCPClientEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.12.1
whispBoxPoEEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.12.2
whispBoxRadioAlarmEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.12.3
whispBoxDNS
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.13
dnsIpState
OBJECT-TYPE
Configuration for DNS server IP addresses of the management interface are learned: 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP 1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface
1.3.6.1.4.1.161.19.3.3.13.1INTEGER {manual(0), automatic(1)}read-writecurrent
dnsPrimaryMgmtIP
OBJECT-TYPE
Primary DNS IP address for the management interface.
1.3.6.1.4.1.161.19.3.3.13.2IpAddressread-writecurrent
dnsAlternateMgmtIP
OBJECT-TYPE
Secondary DNS IP address for the management interface.
1.3.6.1.4.1.161.19.3.3.13.3IpAddressread-writecurrent
dnsMgmtDomainName
OBJECT-TYPE
Domain Name to use for management DNS configuration. This domain name may be concatonated to DNS names used configured for the management interface.
1.3.6.1.4.1.161.19.3.3.13.4DisplayStringread-writecurrent
trapDomainNameAppend
OBJECT-TYPE
Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend is set to appendDomain, the trap1 name used would be 'trap1.example.com'.
1.3.6.1.4.1.161.19.3.3.13.5INTEGER {disableDomain(0), appendDomain(1)}read-writecurrent
trap1
OBJECT-TYPE
SNMP Trap IP Address 1. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.6DisplayStringread-writecurrent
trap2
OBJECT-TYPE
SNMP Trap IP Address 2. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.7DisplayStringread-writecurrent
trap3
OBJECT-TYPE
SNMP Trap IP Address 3. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.8DisplayStringread-writecurrent
trap4
OBJECT-TYPE
SNMP Trap IP Address 4. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.9DisplayStringread-writecurrent
trap5
OBJECT-TYPE
SNMP Trap IP Address 5. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.10DisplayStringread-writecurrent
trap6
OBJECT-TYPE
SNMP Trap IP Address 6. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.11DisplayStringread-writecurrent
trap7
OBJECT-TYPE
SNMP Trap IP Address 7. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.12DisplayStringread-writecurrent
trap8
OBJECT-TYPE
SNMP Trap IP Address 8. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.13DisplayStringread-writecurrent
trap9
OBJECT-TYPE
SNMP Trap IP Address 9. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.14DisplayStringread-writecurrent
trap10
OBJECT-TYPE
SNMP Trap IP Address 10. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.3.13.15DisplayStringread-writecurrent
whispBoxSNMPv3
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.14
snmpv2cEnable
OBJECT-TYPE
Enable(1) or Disable(0) SNMPv2c access
1.3.6.1.4.1.161.19.3.3.14.1INTEGER {disable(0), enable(1)}read-writecurrent
snmpv3EngineId
OBJECT-TYPE
The SNMPv3 engine administratively-unique identifier. Length of the identifier should be 5-32 octets which is 10-64 hexadecimal characters and even.
1.3.6.1.4.1.161.19.3.3.14.2OCTET STRING (SIZE(10..64))read-writecurrent
snmpv3SecLvl
OBJECT-TYPE
The security level of the SNMPv3 Engine.
1.3.6.1.4.1.161.19.3.3.14.3INTEGER {noAuth-noPriv(0), auth-noPriv(1), auth-priv(2)}read-writecurrent
snmpv3AuthProt
OBJECT-TYPE
The SNMPv3 message authentication protocol to use. Currently only MD5 is supported.
1.3.6.1.4.1.161.19.3.3.14.4INTEGER {md5(0)}read-writecurrent
snmpv3PrivProt
OBJECT-TYPE
The SNMPv3 message privacy/encryption protocol to use. Currently only CBC-DES is supported.
1.3.6.1.4.1.161.19.3.3.14.5INTEGER {cbc-des(0)}read-writecurrent
roUserName
OBJECT-TYPE
SNMPv3 Read-Only username.
1.3.6.1.4.1.161.19.3.3.14.6OCTET STRING (SIZE(1..32))read-writecurrent
roAuthPassword
OBJECT-TYPE
SNMPv3 Read-Only message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.7OCTET STRING (SIZE(1..32))read-writecurrent
roPrivPassword
OBJECT-TYPE
SNMPv3 Read-Only message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.8OCTET STRING (SIZE(1..32))read-writecurrent
rwUserEnable
OBJECT-TYPE
SNMPv3 Read-Write User Enable.
1.3.6.1.4.1.161.19.3.3.14.9INTEGER {disable(0), enable(1)}read-writecurrent
rwUserName
OBJECT-TYPE
SNMPv3 Read-Write Username.
1.3.6.1.4.1.161.19.3.3.14.10OCTET STRING (SIZE(1..32))read-writecurrent
rwAuthPassword
OBJECT-TYPE
SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.11OCTET STRING (SIZE(1..32))read-writecurrent
rwPrivPassword
OBJECT-TYPE
SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.12OCTET STRING (SIZE(1..32))read-writecurrent
snmpv3TrapEnable
OBJECT-TYPE
SNMPv3 Trap enable option: (0) Disable - No SNMPv3 Traps Sent (1) Enable Traps to be sent for SNMPv3 Read-Only User (2) Enable Traps to be sent for SNMPv3 Read-Write User NOTE: When disabled SNMPv2c Trap configuration is used.
1.3.6.1.4.1.161.19.3.3.14.13INTEGER {disabled(0), roUserTrapEnable(1), rwUserTrapEnable(2)}read-writecurrent
user1Enable
OBJECT-TYPE
SNMPv3 Additional User1 Enable.
1.3.6.1.4.1.161.19.3.3.14.14INTEGER {disable(0), enable(1)}read-writecurrent
userName1
OBJECT-TYPE
Additional SNMPv3 Username1.
1.3.6.1.4.1.161.19.3.3.14.15OCTET STRING (SIZE(1..32))read-writecurrent
user1AuthPassword
OBJECT-TYPE
SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.16OCTET STRING (SIZE(1..32))read-writecurrent
user1PrivPassword
OBJECT-TYPE
SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.17OCTET STRING (SIZE(1..32))read-writecurrent
userGroup1
OBJECT-TYPE
SNMPv3 User1 Group (ReadWrite/ReadOnly).
1.3.6.1.4.1.161.19.3.3.14.18INTEGER {readonly(0), readwrite(1)}read-writecurrent
userName2
OBJECT-TYPE
Additional SNMPv3 Username2.
1.3.6.1.4.1.161.19.3.3.14.19OCTET STRING (SIZE(1..32))read-writecurrent
user2Enable
OBJECT-TYPE
SNMPv3 Additional User2 Enable.
1.3.6.1.4.1.161.19.3.3.14.20INTEGER {disable(0), enable(1)}read-writecurrent
user2AuthPassword
OBJECT-TYPE
SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.21OCTET STRING (SIZE(1..32))read-writecurrent
user2PrivPassword
OBJECT-TYPE
SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.22OCTET STRING (SIZE(1..32))read-writecurrent
user2Group
OBJECT-TYPE
SNMPv3 User1 Group (ReadWrite/ReadOnly).
1.3.6.1.4.1.161.19.3.3.14.23INTEGER {readonly(0), readwrite(1)}read-writecurrent
userName3
OBJECT-TYPE
Additional SNMPv3 Username1.
1.3.6.1.4.1.161.19.3.3.14.24OCTET STRING (SIZE(1..32))read-writecurrent
user3Enable
OBJECT-TYPE
SNMPv3 Additional User3 Enable.
1.3.6.1.4.1.161.19.3.3.14.25INTEGER {disable(0), enable(1)}read-writecurrent
user3AuthPassword
OBJECT-TYPE
SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.26OCTET STRING (SIZE(1..32))read-writecurrent
user3PrivPassword
OBJECT-TYPE
SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long.
1.3.6.1.4.1.161.19.3.3.14.27OCTET STRING (SIZE(1..32))read-writecurrent
user3Group
OBJECT-TYPE
SNMPv3 User3 Group (ReadWrite/ReadOnly).
1.3.6.1.4.1.161.19.3.3.14.28INTEGER {readonly(0), readwrite(1)}read-writecurrent
whispBoxRFPhysical
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.15
whispBoxRFPhysicalRadios
OBJECT-TYPE
Radio information table.
1.3.6.1.4.1.161.19.3.3.15.1not-accessiblecurrent
whispBoxRFPhysicalRadioEntry
OBJECT-TYPE
Radio information table entry.
1.3.6.1.4.1.161.19.3.3.15.1.1not-accessiblecurrent
radioIndex
OBJECT-TYPE
Radio Index.
1.3.6.1.4.1.161.19.3.3.15.1.1.1INTEGER (0..256)read-onlycurrent
radioType
OBJECT-TYPE
Indicates if the radio is FSK or OFDM.
1.3.6.1.4.1.161.19.3.3.15.1.1.2INTEGER {fsk(0), ofdm(1)}read-onlycurrent
radioPaths
OBJECT-TYPE
Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1. For MIMO, it can be greater (with a current maximum of 2).
1.3.6.1.4.1.161.19.3.3.15.1.1.3INTEGER (0..256)read-onlycurrent
whispBoxRFPhysicalRadioPaths
OBJECT-TYPE
Radio path information table.
1.3.6.1.4.1.161.19.3.3.15.2not-accessiblecurrent
whispBoxRFPhysicalRadioPathEntry
OBJECT-TYPE
Radio path table entry.
1.3.6.1.4.1.161.19.3.3.15.2.1not-accessiblecurrent
pathIndex
OBJECT-TYPE
Path Index.
1.3.6.1.4.1.161.19.3.3.15.2.1.1INTEGER (0..256)read-onlycurrent
whispBoxRFPhysicalRadioFrequencies
OBJECT-TYPE
Available frequency information table.
1.3.6.1.4.1.161.19.3.3.15.3not-accessiblecurrent
whispBoxRFPhysicalRadioFrequencyEntry
OBJECT-TYPE
Available frequency table entry.
1.3.6.1.4.1.161.19.3.3.15.3.1not-accessiblecurrent
frequency
OBJECT-TYPE
Frequency.
1.3.6.1.4.1.161.19.3.3.15.3.1.1INTEGER (0..9000000)read-onlycurrent
whispBoxRFConfig
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.16
whispBoxRFConfigRadios
OBJECT-TYPE
Radio configuration table.
1.3.6.1.4.1.161.19.3.3.16.1not-accessiblecurrent
whispBoxRFConfigRadioEntry
OBJECT-TYPE
Radio config table entry.
1.3.6.1.4.1.161.19.3.3.16.1.1not-accessiblecurrent
radioConfigIndex
OBJECT-TYPE
Radio Config Index.
1.3.6.1.4.1.161.19.3.3.16.1.1.1INTEGER (0..256)read-onlycurrent
radioFrequencyBand
OBJECT-TYPE
Currently configured radio band. Set is Engineering use only.
1.3.6.1.4.1.161.19.3.3.16.1.1.2INTEGER {band700(0), band900(1), band2400(2), band3500(3), band3700(4), band4900(5), band5100(6), band5200(7), band5400(8), band5700(9), band5800(10), band5900(11), band6050(12), band3600(13), band4959(14), band3(15)}read-writecurrent
whispVLANRemarkTable
OBJECT-TYPE
Active VLAN Remarking table.
1.3.6.1.4.1.161.19.3.3.17not-accessiblecurrent
whispVLANRemarkEntry
OBJECT-TYPE
Remarking VLAN entry.
1.3.6.1.4.1.161.19.3.3.17.1not-accessiblecurrent
sourceVID
OBJECT-TYPE
Source VLAN ID.
1.3.6.1.4.1.161.19.3.3.17.1.1INTEGER (1..4094)read-onlycurrent
remarkVIDState
OBJECT-TYPE
Remark VID State.
1.3.6.1.4.1.161.19.3.3.17.1.2DisplayStringread-onlycurrent
remarkVID
OBJECT-TYPE
Remark VID.
1.3.6.1.4.1.161.19.3.3.17.1.3INTEGER (0..4094)read-onlycurrent
remarkPriorityState
OBJECT-TYPE
Remark Priority State.
1.3.6.1.4.1.161.19.3.3.17.1.4DisplayStringread-onlycurrent
remarkPriority
OBJECT-TYPE
Remark Priority.
1.3.6.1.4.1.161.19.3.3.17.1.5INTEGER (0..7)read-onlycurrent
whispBoxLinkTestConfig
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.18.1
linkTestLUIDBox
OBJECT-TYPE
LUID selection for Link Test. Valid range: 2-255. Read-Only for SM or Backhaul slave, Read/Write for AP.
1.3.6.1.4.1.161.19.3.3.18.1.1INTEGERread-writecurrent
linkTestDurationBox
OBJECT-TYPE
Duration for the Link Test. Valid range: 2-10 seconds
1.3.6.1.4.1.161.19.3.3.18.1.2INTEGERread-writecurrent
linkTestActionBox
OBJECT-TYPE
Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicates the idle state meaning no test is running or the current test is done. That's why the word stopped is used and not the action verb stop.
1.3.6.1.4.1.161.19.3.3.18.1.3INTEGER {stopped(0), start(1)}read-writecurrent
linkTestPktLengthBox
OBJECT-TYPE
Packet length for Link Test. Valid range: 64-1714 bytes
1.3.6.1.4.1.161.19.3.3.18.1.4INTEGERread-writecurrent
linkTestModeBox
OBJECT-TYPE
Link Test Mode 0 = Link Test without Bridging 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput) This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. Extrapolated Link Test is not available for FSK radios. 4 = Link Test with Multiple VCs (traffic sent to all registered VCs, or specified VCs) - PMP 450m only
1.3.6.1.4.1.161.19.3.3.18.1.5INTEGER {linktestwithoutbridging(0), linktestwithbridging(1), linktestwithbridgingandmir(2), extrapolatedlinktest(3), linktestwithmultipleVCs(4)}read-writecurrent
linkTestSNRCalculationBox
OBJECT-TYPE
Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will slightly degrade packet per second capabilities. Only applicable to GenII OFDM products and up.
1.3.6.1.4.1.161.19.3.3.18.1.6INTEGER {disable(0), enable(1)}read-writecurrent
linkTestWithDualPathBox
OBJECT-TYPE
Link Test with: 0 = Low Priority VC only 1 = High and Low Priority VCs
1.3.6.1.4.1.161.19.3.3.18.1.7INTEGER {lowpriorityvconly(0), highandlowpriorityvcs(1)}read-writecurrent
linkTestNumPktBox
OBJECT-TYPE
Number of packets to send. Valid range: 0-64 where 0 will flood the link for the duration of the test.
1.3.6.1.4.1.161.19.3.3.18.1.8INTEGERread-writecurrent
linkTestForceModulationBox
OBJECT-TYPE
Engineering use only. Link Test with: 0 = Normal Rate Adapt algorithm 1 = Force to max modultion - No Rate Adapt Algorithm
1.3.6.1.4.1.161.19.3.3.18.1.9INTEGER {normalRateAdapt(0), forceMaxModulation(1)}read-writecurrent
linkTestDirectionBox
OBJECT-TYPE
Link Test Direction - Engineering Use Only 0 = default (will do bidirectional) 1 = Uplink Only 2 = Downlink Only 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0)
1.3.6.1.4.1.161.19.3.3.18.1.10INTEGER {bidirectional(0), uplinkonly(1), downlinkonly(2)}read-writecurrent
linkTestFloodModeBox
OBJECT-TYPE
PMP 450m only. Engineering use only. Link Test usage: 0 = Packets will be sent out the SM ethernet port 1 = Packets will not be sent out the SM ethernet port
1.3.6.1.4.1.161.19.3.3.18.1.11INTEGER {external(0), internal(1)}read-writecurrent
linkTestMumimoBox
OBJECT-TYPE
PMP 450m only. Link Test usage: 0 = MU-MIMO disabled (legacy or sector mode) 1 = MU-MIMO enabled
1.3.6.1.4.1.161.19.3.3.18.1.12INTEGER {disable(0), enable(1)}read-writecurrent
linkTestVCListBox
OBJECT-TYPE
PMP 450m only. Link Test usage: Enter VCs to be tested (eg. 18 - 22,24,32) Empty field or 0 will flood all registered VCs for duration of test
1.3.6.1.4.1.161.19.3.3.18.1.13DisplayStringread-writecurrent
linkTestSMRestriction
OBJECT-TYPE
Control access to SM initiated Link Tests. Disabling will permit all Link Tests initiated at the SM. Enabling will only permit Link Tests that allow user traffic to pass. PMP only.
1.3.6.1.4.1.161.19.3.3.18.1.14INTEGER {disable(0), enable(1)}read-writecurrent
whispBoxLinkTestResult
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.18.2
testLUIDBox
OBJECT-TYPE
LUID number of selected unit.
1.3.6.1.4.1.161.19.3.3.18.2.1INTEGERread-onlycurrent
linkTestStatusBox
OBJECT-TYPE
Status for Link Test.
1.3.6.1.4.1.161.19.3.3.18.2.2DisplayStringread-onlycurrent
linkTestErrorBox
OBJECT-TYPE
Error status of Link Test: (1) Failed to recieve handshake from remote device (2) No session is currently active. Please try again after session established. (3) Received a bad transaction ID. Please try again. (4) We werent able to send the test request to the remote device. (5) We didnt receive any results from the remote device.
1.3.6.1.4.1.161.19.3.3.18.2.3DisplayStringread-onlycurrent
testDurationBox
OBJECT-TYPE
Duration of link test.
1.3.6.1.4.1.161.19.3.3.18.2.4INTEGERread-onlycurrent
downLinkRateBox
OBJECT-TYPE
Downlink Rate.
1.3.6.1.4.1.161.19.3.3.18.2.5INTEGERread-onlycurrent
upLinkRateBox
OBJECT-TYPE
Uplink Rate.
1.3.6.1.4.1.161.19.3.3.18.2.6INTEGERread-onlycurrent
downLinkEffBox
OBJECT-TYPE
Down Link Efficiency.
1.3.6.1.4.1.161.19.3.3.18.2.7INTEGERread-onlycurrent
maxDwnLinkIndexBox
OBJECT-TYPE
For link test results, the maximum possible downlink efficiency percentage (always 100%).
1.3.6.1.4.1.161.19.3.3.18.2.8INTEGERread-onlycurrent
actDwnLinkIndexBox
OBJECT-TYPE
Actual down link index.
1.3.6.1.4.1.161.19.3.3.18.2.9INTEGERread-onlycurrent
expDwnFragCountBox
OBJECT-TYPE
Expected Fragment Count.
1.3.6.1.4.1.161.19.3.3.18.2.10Gauge32read-onlycurrent
actDwnFragCountBox
OBJECT-TYPE
Actual Fragment Count
1.3.6.1.4.1.161.19.3.3.18.2.11Gauge32read-onlycurrent
upLinkEffBox
OBJECT-TYPE
Up link efficiency.
1.3.6.1.4.1.161.19.3.3.18.2.12INTEGERread-onlycurrent
expUpFragCountBox
OBJECT-TYPE
Uplink expected Fragment Count.
1.3.6.1.4.1.161.19.3.3.18.2.13Gauge32read-onlycurrent
actUpFragCountBox
OBJECT-TYPE
Actual uplink Fragment Count.
1.3.6.1.4.1.161.19.3.3.18.2.14Gauge32read-onlycurrent
maxUpLinkIndexBox
OBJECT-TYPE
For link test results, the maximum possible uplink efficiency percentage (always 100%).
1.3.6.1.4.1.161.19.3.3.18.2.15INTEGERread-onlycurrent
actUpLinkIndexBox
OBJECT-TYPE
Actual Up link index.
1.3.6.1.4.1.161.19.3.3.18.2.16INTEGERread-onlycurrent
fragments1xDwnLinkVerticalBox
OBJECT-TYPE
Number of fragments received on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.17INTEGERread-onlycurrent
fragments2xDwnLinkVerticalBox
OBJECT-TYPE
Number of fragments received on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.18INTEGERread-onlycurrent
fragments3xDwnLinkVerticalBox
OBJECT-TYPE
Number of fragments received on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.19INTEGERread-onlycurrent
fragments4xDwnLinkVerticalBox
OBJECT-TYPE
Number of fragments received on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.20INTEGERread-onlycurrent
fragments1xUpLinkVerticalBox
OBJECT-TYPE
Number of fragments received on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.21INTEGERread-onlycurrent
fragments2xUpLinkVerticalBox
OBJECT-TYPE
Number of fragments received on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.22INTEGERread-onlycurrent
fragments3xUpLinkVerticalBox
OBJECT-TYPE
Number of fragments received on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.23INTEGERread-onlycurrent
fragments4xUpLinkVerticalBox
OBJECT-TYPE
Number of fragments received on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.24INTEGERread-onlycurrent
bitErrorsCorrected1xDwnLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.25DisplayStringread-onlycurrent
bitErrorsCorrected2xDwnLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.26DisplayStringread-onlycurrent
bitErrorsCorrected3xDwnLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.27DisplayStringread-onlycurrent
bitErrorsCorrected4xDwnLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.28DisplayStringread-onlycurrent
bitErrorsCorrected1xUpLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.29DisplayStringread-onlycurrent
bitErrorsCorrected2xUpLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.30DisplayStringread-onlycurrent
bitErrorsCorrected3xUpLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.31DisplayStringread-onlycurrent
bitErrorsCorrected4xUpLinkVerticalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.32DisplayStringread-onlycurrent
signalToNoiseRatioDownLinkVerticalBox
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the down link. For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.33INTEGERread-onlycurrent
signalToNoiseRatioUpLinkVerticalBox
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.3.18.2.34INTEGERread-onlycurrent
fragments1xDwnLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on down link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.35INTEGERread-onlycurrent
fragments2xDwnLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on down link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.36INTEGERread-onlycurrent
fragments3xDwnLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on down link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.37INTEGERread-onlycurrent
fragments4xDwnLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on down link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.38INTEGERread-onlycurrent
fragments1xUpLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on up link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.39INTEGERread-onlycurrent
fragments2xUpLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on up link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.40INTEGERread-onlycurrent
fragments3xUpLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on up link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.41INTEGERread-onlycurrent
fragments4xUpLinkHorizontalBox
OBJECT-TYPE
Number of fragments received on up link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.42INTEGERread-onlycurrent
bitErrorsCorrected1xDwnLinkHorizontalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.43DisplayStringread-onlycurrent
bitErrorsCorrected2xDwnLinkHorizontalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.44DisplayStringread-onlycurrent
bitErrorsCorrected3xDwnLinkHorizontalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.45DisplayStringread-onlycurrent
bitErrorsCorrected4xDwnLinkHorizontalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.46DisplayStringread-onlycurrent
bitErrorsCorrected1xUpLinkHorizontalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.47DisplayStringread-onlycurrent
bitErrorsCorrected2xUpLinkHorizontalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.48DisplayStringread-onlycurrent
bitErrorsCorrected3xUpLinkHorizontalBox
OBJECT-TYPE
Engineering use only. Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.49DisplayStringread-onlycurrent
bitErrorsCorrected4xUpLinkHorizontalBox
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.3.18.2.50DisplayStringread-onlycurrent
signalToNoiseRatioDownLinkHorizontalBox
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the down link. For MIMO and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.3.18.2.51INTEGERread-onlycurrent
signalToNoiseRatioUpLinkHorizontalBox
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.3.18.2.52INTEGERread-onlycurrent
downLinkRateExtrapolatedBox
OBJECT-TYPE
Extrapolated Downlink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector.
1.3.6.1.4.1.161.19.3.3.18.2.53INTEGERread-onlycurrent
upLinkRateExtrapolatedBox
OBJECT-TYPE
Extrapolated Uplink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector.
1.3.6.1.4.1.161.19.3.3.18.2.54INTEGERread-onlycurrent
linkTestLastRunTime
OBJECT-TYPE
Time and Date when last link test ran.
1.3.6.1.4.1.161.19.3.3.18.2.55DisplayStringread-onlycurrent
linkTestNumPktTxActCnt
OBJECT-TYPE
Number of actual packets transmitted during link test.
1.3.6.1.4.1.161.19.3.3.18.2.58INTEGERread-onlycurrent
linkTestNumPktTxExpCnt
OBJECT-TYPE
Number of expected packets to be transmitted during link test.
1.3.6.1.4.1.161.19.3.3.18.2.59INTEGERread-onlycurrent
linkTestNumPktRxActCnt
OBJECT-TYPE
Number of actual packets received during link test.
1.3.6.1.4.1.161.19.3.3.18.2.60INTEGERread-onlycurrent
linkTestNumPktRxExpCnt
OBJECT-TYPE
Number of packets expected to be received during link test.
1.3.6.1.4.1.161.19.3.3.18.2.61INTEGERread-onlycurrent
whispRegStatusBox
OBJECT-TYPE
This shows the registration status of a link.
1.3.6.1.4.1.161.19.3.3.18.4DisplayStringread-onlyobsolete
whispBoxLinkTestMVCResult
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.18.5
linkTestMVCXmtFragsTotalDL
OBJECT-TYPE
Total Downlink Fragments Transmitted
1.3.6.1.4.1.161.19.3.3.18.5.1INTEGERread-onlycurrent
linkTestMVCRcvFragsTotalDL
OBJECT-TYPE
Total Downlink Fragments Received
1.3.6.1.4.1.161.19.3.3.18.5.2INTEGERread-onlycurrent
linkTestMVCThroughputTotalDL
OBJECT-TYPE
Total Downlink Throughput for Tested VCs
1.3.6.1.4.1.161.19.3.3.18.5.3INTEGERread-onlycurrent
linkTestMVCThroughputTotalUntestedVCsDL
OBJECT-TYPE
Total Downlink Throughput for Untested VCs. This is the amount of user traffic that was transmitted to VCs during the test that were not part of the Link Test.
1.3.6.1.4.1.161.19.3.3.18.5.4INTEGERread-onlycurrent
linkTestMVCEfficiencyTotalDL
OBJECT-TYPE
Total Downlink Efficiency
1.3.6.1.4.1.161.19.3.3.18.5.5INTEGERread-onlycurrent
linkTestMVCSlotDistributionDL
OBJECT-TYPE
Downlink Slot Distribution. Average group size per slot per frame represented as a percentage. 450m only.
1.3.6.1.4.1.161.19.3.3.18.5.6DisplayStringread-onlycurrent
whispBoxLinkTestMVCTable
OBJECT-TYPE
Link Test with Multiple VC results.
1.3.6.1.4.1.161.19.3.3.18.6not-accessiblecurrent
whispBoxLinkTestMVCEntry
OBJECT-TYPE
Link Test with Multiple VC results.
1.3.6.1.4.1.161.19.3.3.18.6.1not-accessiblecurrent
linkTestMVCVC
OBJECT-TYPE
VC
1.3.6.1.4.1.161.19.3.3.18.6.1.1INTEGER (0..255)read-onlycurrent
linkTestMVCPriority
OBJECT-TYPE
VC Priority
1.3.6.1.4.1.161.19.3.3.18.6.1.2INTEGER {low(0), high(1)}read-onlycurrent
linkTestMVCXmtFragsDL
OBJECT-TYPE
Downlink Fragments Transmitted
1.3.6.1.4.1.161.19.3.3.18.6.1.3INTEGERread-onlycurrent
linkTestMVCRcvFragsDL
OBJECT-TYPE
Downlink Fragments Received
1.3.6.1.4.1.161.19.3.3.18.6.1.4INTEGERread-onlycurrent
linkTestMVCThroughputDL
OBJECT-TYPE
Downlink Throughput
1.3.6.1.4.1.161.19.3.3.18.6.1.5INTEGERread-onlycurrent
linkTestMVCEfficiencyDL
OBJECT-TYPE
Downlink Efficiency
1.3.6.1.4.1.161.19.3.3.18.6.1.6INTEGERread-onlycurrent
linkTestMVCSumimoModRateDL
OBJECT-TYPE
Downlink SU-MIMO Modulation Transmit Rate. 0 : No session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 8 : 8X 256-QAM MIMO-B
1.3.6.1.4.1.161.19.3.3.18.6.1.7INTEGER {noSession(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)}read-onlycurrent
linkTestMVCSumimoXmtModeDL
OBJECT-TYPE
Downlink SU-MIMO Transmit Mode. 0 : MIMO-B 1 : MIMO-A 2 : No session
1.3.6.1.4.1.161.19.3.3.18.6.1.8INTEGER {mimo-b(0), mimo-a(1), noSession(2)}read-onlycurrent
linkTestMVCMumimoModRateDL
OBJECT-TYPE
Downlink MU-MIMO Modulation Transmit Rate. 450m only. 0 : Invalid 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 8 : 8X 256-QAM MIMO-B
1.3.6.1.4.1.161.19.3.3.18.6.1.9INTEGER {invalid(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)}read-onlycurrent
linkTestMVCMumimoXmtModeDL
OBJECT-TYPE
Downlink MU-MIMO Transmit Mode. 450m only. 0 : MIMO-B 1 : MIMO-A 2 : Invalid
1.3.6.1.4.1.161.19.3.3.18.6.1.10INTEGER {mimo-b(0), mimo-a(1), invalid(2)}read-onlycurrent
linkTestMVCGroupingRatioDL
OBJECT-TYPE
Downlink Grouping Ratio. The percentage of time that a VC is grouped with other VCs to make a MU-MIMO group. 450m only.
1.3.6.1.4.1.161.19.3.3.18.6.1.11INTEGERread-onlycurrent
whispUserAuthSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.3.19
certTableUserAuth
OBJECT-TYPE
The table of CA Certificates for User Auth on radio.
1.3.6.1.4.1.161.19.3.3.19.1not-accessiblecurrent
certEntryUserAuth
OBJECT-TYPE
Entry of Certifcates.
1.3.6.1.4.1.161.19.3.3.19.1.1not-accessiblecurrent
certIdx
OBJECT-TYPE
User information table index.
1.3.6.1.4.1.161.19.3.3.19.1.1.1INTEGER (3..4)read-onlycurrent
certStatus
OBJECT-TYPE
0: Inactive 1: Active
1.3.6.1.4.1.161.19.3.3.19.1.1.2INTEGER {inactive(0), active(1)}read-onlycurrent
certAction
OBJECT-TYPE
0: No Operation 1: Delete Certificate
1.3.6.1.4.1.161.19.3.3.19.1.1.3INTEGER {noop(0), delete(1)}read-writecurrent
certDN
OBJECT-TYPE
Distinguished Name of Certificate
1.3.6.1.4.1.161.19.3.3.19.1.1.4DisplayStringread-onlycurrent

Notifications

NameOIDStatus
boxLan1DHCPClientEvent
NOTIFICATION-TYPE
Lan1 DHCP Client has received a new address via DHCP
1.3.6.1.4.1.161.19.3.3.12.1.1current
boxPoEType2PowerNotPresent
NOTIFICATION-TYPE
802.3at Type 2 PoE not present, transmit and PoE out disabled
1.3.6.1.4.1.161.19.3.3.12.2.1current
radioStatusAlarmEvent
NOTIFICATION-TYPE
Radio Alarm Event notification.
1.3.6.1.4.1.161.19.3.3.12.3.1current

Conformance

NameOIDStatus
whispBoxAttributesGroup
OBJECT-GROUP
Canopy Box Level Attributes group.
1.3.6.1.4.1.161.19.3.3.6.1.1current
whispBoxControlGroup
OBJECT-GROUP
Canopy Box Level control group.
1.3.6.1.4.1.161.19.3.3.6.1.2current
whispBoxBTGroup
OBJECT-GROUP
Canopy Box Bridging Table group.
1.3.6.1.4.1.161.19.3.3.6.1.3current
whispBoxVLANTableGroup
OBJECT-GROUP
Canopy Box VLAN member Table group.
1.3.6.1.4.1.161.19.3.3.6.1.4current
whispBoxCPTableGroup
OBJECT-GROUP
Code Point Table group.
1.3.6.1.4.1.161.19.3.3.6.1.5current
whispBoxUserTableGroup
OBJECT-GROUP
Canopy Box User Information Table group.
1.3.6.1.4.1.161.19.3.3.6.1.6current
whispLayer2NeighborTableGroup
OBJECT-GROUP
Canopy Box Layer 2 Neighbor information.
1.3.6.1.4.1.161.19.3.3.6.1.7current
whispBoxNotifGroup
NOTIFICATION-GROUP
Canopy Box Notification Group.
1.3.6.1.4.1.161.19.3.3.6.1.8current
whispBoxVLANRemarkTableGroup
OBJECT-GROUP
Canopy Box VLAN Remarking Table group.
1.3.6.1.4.1.161.19.3.3.6.1.9current
whispBoxSNMPv3Group
OBJECT-GROUP
Canopy Box SNMPv3 Group.
1.3.6.1.4.1.161.19.3.3.6.1.10current
whispBoxLinkTestGroup
OBJECT-GROUP
Canopy Box Link Test group.
1.3.6.1.4.1.161.19.3.3.6.1.11current