MIBs Depot

WHISP-SM-MIB

Registered at
1.3.6.1.4.1.161.19.1.1.13
1.3.6.1.4.1.161.19.3.2.1
1.3.6.1.4.1.161.19.3.2.2
1.3.6.1.4.1.161.19.3.2.3
1.3.6.1.4.1.161.19.3.2.4
1.3.6.1.4.1.161.19.3.2.7
1.3.6.1.4.1.161.19.3.2.8
Last updated
2003-04-15 00:00
Organization
Cambium Networks
Namespace
cambium
Source file
WHISP-SM-MIB
Digest
sha256:c6e070bbdab277b6fd325deea83001642c936c70dde8fe005d79270b9626daa4

Description

This module contains MIB definitions for Subscriber Modem.

Contact

Cambium Networks Support email: support@cambiumnetworks.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION
WHISP-BOX-MIBV2-MIBdhcpRfPublicIp, whispBoxEsn
WHISP-GLOBAL-REG-MIBwhispAps, whispBox, whispModules, whispSm
WHISP-TCV2-MIBWhispLUID, WhispMACAddress

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WHISP-BOX-MIBV2-MIB
WHISP-GLOBAL-REG-MIB
WHISP-SM-MIB
WHISP-TCV2-MIB

Objects

NameOIDSyntaxAccessStatus
whispSmConfig
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.1
rfScanList
OBJECT-TYPE
RF scan list string. The frequencies vary by product and region. If the frequency list is too long an SNMP error will be returned. If this occurs please refer to OID rfScanListTable, which will allow user to enter the full range of available frequencies. String length is limited to SNMP buffer size, so while all frequencies may be set, not all may be retrieved. Special settings: 0: none. all: All frequencies in the band(s) supported by the radio will be selected. all49, all51, all52: Available only for 450i 5 GHz wideband radio. all54, all57: Available only for 450 and 450i 5 GHz radios. When doing a set, separate values with comma with no white space between values.
1.3.6.1.4.1.161.19.3.2.1.1DisplayStringread-writecurrent
powerUpMode
OBJECT-TYPE
SM Power Up Mode With No 802.3 Link. 0 - Power up in Operational mode. 1 - Power up in Aim mode.
1.3.6.1.4.1.161.19.3.2.1.2INTEGER {operational(0), aim(1)}read-writecurrent
lanIpSm
OBJECT-TYPE
LAN IP.
1.3.6.1.4.1.161.19.3.2.1.3IpAddressread-writecurrent
lanMaskSm
OBJECT-TYPE
LAN subnet mask.
1.3.6.1.4.1.161.19.3.2.1.4IpAddressread-writecurrent
defaultGwSm
OBJECT-TYPE
Default gateway.
1.3.6.1.4.1.161.19.3.2.1.5IpAddressread-writecurrent
networkAccess
OBJECT-TYPE
Network accessibility. Public or local IP. For multipoint only.
1.3.6.1.4.1.161.19.3.2.1.6INTEGER {localIP(0), publicIP(1)}read-writecurrent
authKeySm
OBJECT-TYPE
Authentication key. It should be equal or less than 32 characters long.
1.3.6.1.4.1.161.19.3.2.1.7DisplayStringread-writecurrent
authKeyOption
OBJECT-TYPE
This option is for SMs only. Backhaul timing slave always uses the set key. 0 - Use default key. 1 - Use set key.
1.3.6.1.4.1.161.19.3.2.1.9INTEGER {useDefault(0), useKeySet(1)}read-writecurrent
timingPulseGated
OBJECT-TYPE
0 - Disable (Always propagate the frame timing pulse). 1 - Enable (If SM out of sync then dont propagate the frame timing pulse).
1.3.6.1.4.1.161.19.3.2.1.10INTEGER {disable(0), enable(1)}read-writecurrent
naptPrivateIP
OBJECT-TYPE
NAPT private IP address. Only the first three bytes can be changed when NAPT is enabled.
1.3.6.1.4.1.161.19.3.2.1.11IpAddressread-writecurrent
naptPrivateSubnetMask
OBJECT-TYPE
NAPT private subnet mask. Only the last byte can be changed when NAPT is enabled. The address will always be: 255.255.255.x.
1.3.6.1.4.1.161.19.3.2.1.12IpAddressread-writecurrent
naptPublicIP
OBJECT-TYPE
IP Address of NAPT Public Interface. The variable is available only when NAPT is enabled.
1.3.6.1.4.1.161.19.3.2.1.13IpAddressread-writecurrent
naptPublicSubnetMask
OBJECT-TYPE
Subnet mask for NAPT Public Interface. The variable is available only when NAPT is enabled.
1.3.6.1.4.1.161.19.3.2.1.14IpAddressread-writecurrent
naptPublicGatewayIP
OBJECT-TYPE
IP Address of NAPT Public Interface Gateway. The variable is available only when NAPT is enabled.
1.3.6.1.4.1.161.19.3.2.1.15IpAddressread-writecurrent
naptRFPublicIP
OBJECT-TYPE
IP Address of RF Public Interface. The variable is available only when NAPT is enabled.
1.3.6.1.4.1.161.19.3.2.1.16IpAddressread-writecurrent
naptRFPublicSubnetMask
OBJECT-TYPE
Subnet mask of RF Public Interface. The variable is available only when NAPT is enabled.
1.3.6.1.4.1.161.19.3.2.1.17IpAddressread-writecurrent
naptRFPublicGateway
OBJECT-TYPE
IP Address of RF Public Interface Gateway. The variable is available only when NAPT is enabled.
1.3.6.1.4.1.161.19.3.2.1.18IpAddressread-writecurrent
naptEnable
OBJECT-TYPE
To enable or disable NAPT. For multipoint only. 1=Enable NAPT, 0=Disable NAPT.
1.3.6.1.4.1.161.19.3.2.1.19INTEGER {disabled(0), enabled(1)}read-writecurrent
arpCacheTimeout
OBJECT-TYPE
ARP cache time out in unit of minutes. For multipoint only. Range from 1-30.
1.3.6.1.4.1.161.19.3.2.1.20INTEGERread-writecurrent
tcpGarbageCollectTmout
OBJECT-TYPE
Units of minutes for TCP garbage collection. For multipoint only. Range 4-1440.
1.3.6.1.4.1.161.19.3.2.1.21INTEGERread-writecurrent
udpGarbageCollectTmout
OBJECT-TYPE
Units of minutes for UDP garbage collection. For multipoint only. Range 1-1440.
1.3.6.1.4.1.161.19.3.2.1.22INTEGERread-writecurrent
dhcpClientEnable
OBJECT-TYPE
To enable or disable DHCP client. For multipoint SM's with NAPT enabled.
1.3.6.1.4.1.161.19.3.2.1.23INTEGER {disabled(0), enabled(1)}read-writeobsolete
dhcpServerEnable
OBJECT-TYPE
To enable or disable DHCP server. For multipoint SM's with NAPT enabled.
1.3.6.1.4.1.161.19.3.2.1.24INTEGER {disabled(0), enabled(1)}read-writecurrent
dhcpServerLeaseTime
OBJECT-TYPE
Units of days for DHCP server lease time. For multipoint SM's with NAPT enabled. Range from 1-30.
1.3.6.1.4.1.161.19.3.2.1.25INTEGERread-writecurrent
dhcpIPStart
OBJECT-TYPE
The last byte will be set for the starting IP that our DHCP server gives away. The first 3 bytes of the starting IP are the same as those of NAPT private IP
1.3.6.1.4.1.161.19.3.2.1.26IpAddressread-writecurrent
dnsAutomatic
OBJECT-TYPE
To have DHCP Server obtain DNS information automatically or manually.
1.3.6.1.4.1.161.19.3.2.1.27INTEGER {manually(0), automatically(1)}read-writecurrent
prefferedDNSIP
OBJECT-TYPE
The preferred DNS IP when we are configured for static DNS (Not used when configured for automatic DNS).
1.3.6.1.4.1.161.19.3.2.1.28IpAddressread-writecurrent
alternateDNSIP
OBJECT-TYPE
The alternate DNS IP when we are configured for static DNS (Not used when configured for automatic DNS).
1.3.6.1.4.1.161.19.3.2.1.29IpAddressread-writecurrent
dmzIP
OBJECT-TYPE
Only the last byte of DMZ Host IP will be set. The first 3 bytes of DMZ IP are the same as those of NAPT private IP.
1.3.6.1.4.1.161.19.3.2.1.30IpAddressread-writecurrent
dmzEnable
OBJECT-TYPE
To enable or disable DMZ host functionality.
1.3.6.1.4.1.161.19.3.2.1.31INTEGER {disabled(0), enabled(1)}read-writecurrent
dhcpNumIPsToLease
OBJECT-TYPE
Number of IP addresses that our DHCP server can give away.
1.3.6.1.4.1.161.19.3.2.1.32INTEGERread-writecurrent
pppoeFilter
OBJECT-TYPE
To set PPPoE packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.33INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
smbFilter
OBJECT-TYPE
To set SMB packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.34INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
snmpFilter
OBJECT-TYPE
To set SNMP packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.35INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
userP1Filter
OBJECT-TYPE
To set user defined port 1 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.36INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
userP2Filter
OBJECT-TYPE
To set user defined port 2 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.37INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
userP3Filter
OBJECT-TYPE
To set user defined port 3 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.38INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
allOtherIpFilter
OBJECT-TYPE
To set all other IPv4 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.39INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
upLinkBCastFilter
OBJECT-TYPE
This variable is currently obsolete.
1.3.6.1.4.1.161.19.3.2.1.40INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
arpFilter
OBJECT-TYPE
To set ARP packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.41INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
allOthersFilter
OBJECT-TYPE
To set all other packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.42INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
userDefinedPort1
OBJECT-TYPE
An integer value of number one user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.43INTEGERread-writeobsolete
port1TCPFilter
OBJECT-TYPE
To set user defined port 1 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.44INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
port1UDPFilter
OBJECT-TYPE
To set user defined port 1 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.45INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
userDefinedPort2
OBJECT-TYPE
An integer value of number two user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.46INTEGERread-writeobsolete
port2TCPFilter
OBJECT-TYPE
To set user defined port 2 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.47INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
port2UDPFilter
OBJECT-TYPE
To set user defined port 2 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.48INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
userDefinedPort3
OBJECT-TYPE
An integer value of number three user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.49INTEGERread-writeobsolete
port3TCPFilter
OBJECT-TYPE
To set user defined port 3 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.50INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
port3UDPFilter
OBJECT-TYPE
To set user defined port 3 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.51INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
bootpcFilter
OBJECT-TYPE
To set bootp client sourced packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.52INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
bootpsFilter
OBJECT-TYPE
To set bootp server sourced packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.53INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
ip4MultFilter
OBJECT-TYPE
To set IPv4 MultiCast packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.54INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
ingressVID
OBJECT-TYPE
Untagged ingress VID.
1.3.6.1.4.1.161.19.3.2.1.55INTEGERread-writecurrent
lowPriorityUplinkCIR
OBJECT-TYPE
Low priority uplink CIR.
1.3.6.1.4.1.161.19.3.2.1.56INTEGERread-writecurrent
lowPriorityDownlinkCIR
OBJECT-TYPE
Low priority downlink CIR.
1.3.6.1.4.1.161.19.3.2.1.57INTEGERread-writecurrent
hiPriorityChannel
OBJECT-TYPE
To enable or disable high priority channel.
1.3.6.1.4.1.161.19.3.2.1.58INTEGER {disabled(0), enable(1)}read-writecurrent
hiPriorityUplinkCIR
OBJECT-TYPE
High priority uplink CIR.
1.3.6.1.4.1.161.19.3.2.1.59INTEGERread-writecurrent
hiPriorityDownlinkCIR
OBJECT-TYPE
High priority downlink CIR.
1.3.6.1.4.1.161.19.3.2.1.60INTEGERread-writecurrent
smRateAdapt
OBJECT-TYPE
Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation.
1.3.6.1.4.1.161.19.3.2.1.61INTEGER {onex(0), onextwox(1), onextwoxthreex(2)}read-writeobsolete
upLnkDataRate
OBJECT-TYPE
Sustained uplink bandwidth cap.
1.3.6.1.4.1.161.19.3.2.1.62INTEGERread-writecurrent
upLnkLimit
OBJECT-TYPE
Burst uplink bandwidth cap.
1.3.6.1.4.1.161.19.3.2.1.63INTEGERread-writecurrent
dwnLnkDataRate
OBJECT-TYPE
Sustained downlink bandwidth cap.
1.3.6.1.4.1.161.19.3.2.1.64INTEGERread-writecurrent
dwnLnkLimit
OBJECT-TYPE
Burst downlink bandwidth cap.
1.3.6.1.4.1.161.19.3.2.1.65INTEGERread-writecurrent
dfsConfig
OBJECT-TYPE
To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios.
1.3.6.1.4.1.161.19.3.2.1.66INTEGER {disable(0), enable(1)}read-writeobsolete
ethAccessFilterEnable
OBJECT-TYPE
To enable or disable Ethernet Port access filtering to SM Management Functions. (0) - Ethernet access to SM Management allowed. (1) - Ethernet access to SM Management blocked.
1.3.6.1.4.1.161.19.3.2.1.67INTEGER {disable(0), enable(1)}read-writeobsolete
ipAccessFilterEnable
OBJECT-TYPE
To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 entries.
1.3.6.1.4.1.161.19.3.2.1.68INTEGER {disable(0), enable(1)}read-writecurrent
allowedIPAccess1
OBJECT-TYPE
Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
1.3.6.1.4.1.161.19.3.2.1.69IpAddressread-writecurrent
allowedIPAccess2
OBJECT-TYPE
Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
1.3.6.1.4.1.161.19.3.2.1.70IpAddressread-writecurrent
allowedIPAccess3
OBJECT-TYPE
Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
1.3.6.1.4.1.161.19.3.2.1.71IpAddressread-writecurrent
rfDhcpState
OBJECT-TYPE
To enable or disable RF Interface DHCP feature.
1.3.6.1.4.1.161.19.3.2.1.72INTEGER {disabled(0), enabled(1)}read-writecurrent
bCastMIR
OBJECT-TYPE
To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable. Units are as per bCastMIRUnits variable. Set the units first and then set this value.
1.3.6.1.4.1.161.19.3.2.1.73INTEGER {disabled(0)}read-writecurrent
bhsReReg
OBJECT-TYPE
Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh.
1.3.6.1.4.1.161.19.3.2.1.74INTEGER {disabled(0), enabled(1)}read-writeobsolete
smLEDModeFlag
OBJECT-TYPE
To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0)
1.3.6.1.4.1.161.19.3.2.1.75INTEGER {legacy(0), revised(1)}read-writecurrent
ethAccessEnable
OBJECT-TYPE
To enable or disable Ethernet Port access to SM Management Functions. (1) - Ethernet access to SM Management allowed. (0) - Ethernet access to SM Management blocked.
1.3.6.1.4.1.161.19.3.2.1.76INTEGER {disable(0), enable(1)}read-writecurrent
pppoeEnable
OBJECT-TYPE
Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP.
1.3.6.1.4.1.161.19.3.2.1.77INTEGER {disable(0), enable(1)}read-writecurrent
pppoeAuthenticationType
OBJECT-TYPE
Set the PPPoE Authentication Type to either None or CHAP/pap
1.3.6.1.4.1.161.19.3.2.1.78INTEGER {none(0), chap-pap(1)}read-writecurrent
pppoeAccessConcentrator
OBJECT-TYPE
Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters
1.3.6.1.4.1.161.19.3.2.1.79DisplayStringread-writecurrent
pppoeServiceName
OBJECT-TYPE
Set the PPPoE Service Name. Less than or equal to 32 characters
1.3.6.1.4.1.161.19.3.2.1.80DisplayStringread-writecurrent
pppoeUserName
OBJECT-TYPE
Set the PPPoE Username. Less than or equal to 32 characters
1.3.6.1.4.1.161.19.3.2.1.81DisplayStringread-writecurrent
pppoePassword
OBJECT-TYPE
Set the PPPoE Password. Less than or equal to 32 characters
1.3.6.1.4.1.161.19.3.2.1.82DisplayStringread-writecurrent
pppoeTCPMSSClampEnable
OBJECT-TYPE
Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets. This will allow for a workaround for MTU issues so that the TCP session will only go up to the clamped MSS. If you are using PMTUD reliably, this should not be needed.
1.3.6.1.4.1.161.19.3.2.1.83INTEGER {disable(0), enable(1)}read-writecurrent
pppoeMTUOverrideEnable
OBJECT-TYPE
Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU, the smaller MTU will be used.
1.3.6.1.4.1.161.19.3.2.1.84INTEGER {disable(0), enable(1)}read-writecurrent
pppoeMTUOverrideValue
OBJECT-TYPE
Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU, the smaller MTU will be used. Max MTU of a PPPoE link is 1492.
1.3.6.1.4.1.161.19.3.2.1.85INTEGER (0..1492)read-writecurrent
pppoeTimerType
OBJECT-TYPE
Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and automatically redialed if the link is down. Also could be an Idle Timeout where the link will be automatically dropped after an idle period and redialed if user data is present. Keep Alive timers are in seconds while Idle Timeout timers are in minutes.
1.3.6.1.4.1.161.19.3.2.1.86INTEGER {keepAlive(1), idleTimeout(2)}read-writecurrent
pppoeTimeoutPeriod
OBJECT-TYPE
The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes. Minimum values are 20 seconds for KeepAlive timer, and 5 minutes for Idle Timeout.
1.3.6.1.4.1.161.19.3.2.1.87INTEGERread-writecurrent
timedSpectrumAnalysisDuration
OBJECT-TYPE
As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig. Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds.
1.3.6.1.4.1.161.19.3.2.1.88INTEGER (10..1000)read-writedeprecated
spectrumAnalysisOnBoot
OBJECT-TYPE
To enable or disable Spectrum Analysis on boot up for one scan through the band. (0) - Disabled (1) - Enabled
1.3.6.1.4.1.161.19.3.2.1.89INTEGER {disable(0), enable(1)}read-writecurrent
spectrumAnalysisAction
OBJECT-TYPE
As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig. Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis (2) - Start Continuous Spectrum Analysis (3) - Idle, no Spectrum Analysis results. (4) - Idle, Spectrum Analysis results available. (5) - Timed or Remote Spectrum Analysis in progress. (6) - Continuous Spectrum Analysis in progress. Note: Continuous mode has a max of 24 hours.
1.3.6.1.4.1.161.19.3.2.1.90INTEGER {stopSpectrumAnalysis(0), startTimedSpectrumAnalysis(1), startContinuousSpectrumAnalysis(2), idleNoSpectrumAnalysis(3), idleCompleteSpectrumAnalysis(4), inProgressTimedSpectrumAnalysis(5), inProgressContinuousSpectrumAnalysis(6)}read-writedeprecated
pppoeConnectOD
OBJECT-TYPE
Force a manual PPPoE connection attempt.
1.3.6.1.4.1.161.19.3.2.1.91INTEGER {connectOnDemand(1)}read-writecurrent
pppoeDisconnectOD
OBJECT-TYPE
Force a manual PPPoE disconnection.
1.3.6.1.4.1.161.19.3.2.1.92INTEGER {disconnectOnDemand(1)}read-writecurrent
smAntennaType
OBJECT-TYPE
Deprecated. See whispBoxStatus.antType for antenna type information.
1.3.6.1.4.1.161.19.3.2.1.93INTEGER {integrated(0), external(1)}read-writeobsolete
natConnectionType
OBJECT-TYPE
To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE.
1.3.6.1.4.1.161.19.3.2.1.94INTEGER {staticIP(0), dhcp(1), pppoe(2)}read-writecurrent
wanPingReplyEnable
OBJECT-TYPE
Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces.
1.3.6.1.4.1.161.19.3.2.1.95INTEGER {disable(0), enable(1)}read-writecurrent
packetFilterDirection
OBJECT-TYPE
To packet filter direction when NAT is disabled. Upstream is default. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.96INTEGER {upstream(1), downstream(2)}read-writeobsolete
colorCode2
OBJECT-TYPE
Second Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.97INTEGER (0..254)read-writedeprecated
colorCodepriority2
OBJECT-TYPE
Priority setting for the second color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.98INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode3
OBJECT-TYPE
Third Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.99INTEGER (0..254)read-writedeprecated
colorCodepriority3
OBJECT-TYPE
Priority setting for the third color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.100INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode4
OBJECT-TYPE
Fourth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.101INTEGER (0..254)read-writedeprecated
colorCodepriority4
OBJECT-TYPE
Priority setting for the fourth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.102INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode5
OBJECT-TYPE
Fifth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.103INTEGER (0..254)read-writedeprecated
colorCodepriority5
OBJECT-TYPE
Priority setting for the fifth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.104INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode6
OBJECT-TYPE
Sixth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.105INTEGER (0..254)read-writedeprecated
colorCodepriority6
OBJECT-TYPE
Priority setting for the sixth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.106INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode7
OBJECT-TYPE
Seventh Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.107INTEGER (0..254)read-writedeprecated
colorCodepriority7
OBJECT-TYPE
Priority setting for the seventh color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.108INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode8
OBJECT-TYPE
Eighth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.109INTEGER (0..254)read-writedeprecated
colorCodepriority8
OBJECT-TYPE
Priority setting for the eighth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.110INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode9
OBJECT-TYPE
Ninth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.111INTEGER (0..254)read-writedeprecated
colorCodepriority9
OBJECT-TYPE
Priority setting for the ninth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.112INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
colorCode10
OBJECT-TYPE
Tenth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.113INTEGER (0..254)read-writedeprecated
colorCodepriority10
OBJECT-TYPE
Priority setting for the tenth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
1.3.6.1.4.1.161.19.3.2.1.114INTEGER {disable(0), primary(1), secondary(2), tertiary(3)}read-writedeprecated
natDNSProxyEnable
OBJECT-TYPE
If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically. If disabled, the SM will forward on upstream DNS server information when it sends out DHCP client leases.
1.3.6.1.4.1.161.19.3.2.1.115INTEGER {disabled(0), enabled(1)}read-writecurrent
allIpv4Filter
OBJECT-TYPE
To set all IPv4 packet filter when NAT is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All Other IPv4). Obsolete - Use corresponding OID in whipsBoxConfig MIB.
1.3.6.1.4.1.161.19.3.2.1.116INTEGER {filterOff(0), filterOn(1)}read-writeobsolete
spectrumAnalysisDisplay
OBJECT-TYPE
The display for Spectrum Analyzer: (0) - Averaging over entire period (1) - Instantaneous showing the last reading
1.3.6.1.4.1.161.19.3.2.1.117INTEGER {averaging(0), instantaneous(1)}read-writecurrent
syslogSMXmitSetting
OBJECT-TYPE
Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2).
1.3.6.1.4.1.161.19.3.2.1.118INTEGER {obtain-from-AP(0), enable(1), disable(2)}read-writedeprecated
syslogServerApPreferred
OBJECT-TYPE
Uses Syslog server configuration from AP/BHM if enabled and available, otherwise uses local configuration.
1.3.6.1.4.1.161.19.3.2.1.119INTEGER {use-local(0), use-AP-preferred(1)}read-writecurrent
syslogMinLevelApPreferred
OBJECT-TYPE
Uses Syslog minimum transmit level configuration from AP/BHM if available, otherwise uses local configuration.
1.3.6.1.4.1.161.19.3.2.1.120INTEGER {use-local(0), use-AP-preferred(1)}read-writecurrent
syslogSMXmitControl
OBJECT-TYPE
Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state.
1.3.6.1.4.1.161.19.3.2.1.121INTEGER {obtain-from-AP-default-disabled(0), obtain-from-AP-default-enabled(1), disable(2), enable(3)}read-writecurrent
eapPeerAAAServerCommonName
OBJECT-TYPE
THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name
1.3.6.1.4.1.161.19.3.2.1.126DisplayStringread-writecurrent
rfScanListBandFilter
OBJECT-TYPE
This element is obsolete.
1.3.6.1.4.1.161.19.3.2.1.127INTEGER {band5400(8), band5700(9)}read-writeobsolete
upLnkMaxBurstDataRate
OBJECT-TYPE
Maximum burst uplink rate.
1.3.6.1.4.1.161.19.3.2.1.128INTEGERread-writecurrent
dwnLnkMaxBurstDataRate
OBJECT-TYPE
Maximum burst downlink rate.
1.3.6.1.4.1.161.19.3.2.1.129INTEGERread-writecurrent
cyclicPrefixScan
OBJECT-TYPE
Cyclic Prefix value for frequency scanning used by MIMO SMs only. When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16
1.3.6.1.4.1.161.19.3.2.1.130DisplayStringread-writecurrent
bandwidthScan
OBJECT-TYPE
Bandwidth values for frequency scanning used by MIMO SMs only. When setting use a comma delimited list of bandwidths. For example: 10, 20
1.3.6.1.4.1.161.19.3.2.1.131DisplayStringread-writecurrent
apSelection
OBJECT-TYPE
This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration. (0) - Default, Canopy radios after scanning select the best AP that will optimize for estimated throughput. (1) - Select the AP with the best receive power level. Note this is only if multiple APs fit the current scan configuration, and will be overriden by color codes, RADIUS, etc.
1.3.6.1.4.1.161.19.3.2.1.132INTEGER {optimizeForThroughput(0), powerLevel(1)}read-writecurrent
radioBandscanConfig
OBJECT-TYPE
Used to determine when frequency, cyclic prefix and bandwidth settings take effect for band scanning MIMO SMs. 0 - Instant 1 - Delayed 2 - Apply changes
1.3.6.1.4.1.161.19.3.2.1.133INTEGER {instant(0), delayed(1), apply(2)}read-writecurrent
forcepoweradjust
OBJECT-TYPE
This will force a multipoint SM to initiate an asynchronous power adjust sequence. This is done automatically every 2 minutes.
1.3.6.1.4.1.161.19.3.2.1.134INTEGERread-writecurrent
clearBerrResults
OBJECT-TYPE
This will clear the BER results.
1.3.6.1.4.1.161.19.3.2.1.135INTEGERread-writecurrent
berrautoupdateflag
OBJECT-TYPE
This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled
1.3.6.1.4.1.161.19.3.2.1.136INTEGERread-writecurrent
testSMBER
OBJECT-TYPE
0 - Disable (Return the SM to a normal operation state). 1 - Enable (Set SM into a BER test state).
1.3.6.1.4.1.161.19.3.2.1.137INTEGER {disable(0), enable(1)}read-writecurrent
allowedIPAccessNMLength1
OBJECT-TYPE
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
1.3.6.1.4.1.161.19.3.2.1.138INTEGER (1..32)read-writecurrent
allowedIPAccessNMLength2
OBJECT-TYPE
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
1.3.6.1.4.1.161.19.3.2.1.139INTEGER (1..32)read-writecurrent
allowedIPAccessNMLength3
OBJECT-TYPE
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
1.3.6.1.4.1.161.19.3.2.1.140INTEGER (1..32)read-writecurrent
naptRemoteManage
OBJECT-TYPE
To enable or disable Remote Management. For multipoint only. 0=Disable Remote Management, 1=Enable - Standalone Config, 2=Enable - Use WAN Interface.
1.3.6.1.4.1.161.19.3.2.1.141INTEGER {disable(0), enable-standalone(1), enable-wan(2)}read-writecurrent
spectrumAnalysisScanBandwidth
OBJECT-TYPE
Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450.
1.3.6.1.4.1.161.19.3.2.1.142INTEGER {bandwidth5MHz(0), bandwidth10MHz(1), bandwidth20MHz(2), bandwidth7MHz(3), bandwidth15MHz(4), bandwidth30MHz(5)}read-writecurrent
berDeModSelect
OBJECT-TYPE
The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM.
1.3.6.1.4.1.161.19.3.2.1.143INTEGER {qpsk(0), qam-16(1), qam-64(2), qam-256(3)}read-writecurrent
multicastVCRcvRate
OBJECT-TYPE
Multicast VC Receive Rate
1.3.6.1.4.1.161.19.3.2.1.144DisplayStringread-onlycurrent
pmp430ApRegistrationOptions
OBJECT-TYPE
Deprecated. The 430 SM only supports PMP 450 interoperability mode.
1.3.6.1.4.1.161.19.3.2.1.145INTEGER {pmp430(1), pmp450(2), both(3)}read-writedeprecated
switchRadioModeAndReboot
OBJECT-TYPE
As of 14.2, the 430 SM no longer supports multiple radio modes. It only support 450 interoperability mode.
1.3.6.1.4.1.161.19.3.2.1.146INTEGER {finishedReboot(0), switchRadioModeAndReboot(1)}read-writeobsolete
natTslTableSize
OBJECT-TYPE
NAT Translation Table Size. Range 1024-8192.
1.3.6.1.4.1.161.19.3.2.1.147INTEGER (1024..8192)read-writecurrent
ingressVIDPriority
OBJECT-TYPE
ingress VID VLAN Priority.
1.3.6.1.4.1.161.19.3.2.1.148INTEGER (0..7)read-writecurrent
ingressVIDPriorityMode
OBJECT-TYPE
ingress VID VLAN Priority Mode.
1.3.6.1.4.1.161.19.3.2.1.149INTEGER {promote-IP-priority(0), define-priority(1)}read-writecurrent
providerVIDPriority
OBJECT-TYPE
Provider VID VLAN Priority.
1.3.6.1.4.1.161.19.3.2.1.150INTEGER (0..7)read-writecurrent
providerVIDPriorityMode
OBJECT-TYPE
Provider VID VLAN Priority Mode.
1.3.6.1.4.1.161.19.3.2.1.151INTEGER {promote-IP-priority(0), define-priority(1), copy-inner-tag-priority(2)}read-writecurrent
additionalColorCode
OBJECT-TYPE
Add an additional color code. Setting additionalColorCode and additionalColorCodePriority adds an entry.
1.3.6.1.4.1.161.19.3.2.1.152INTEGER (0..254)read-writecurrent
additionalColorCodePriority
OBJECT-TYPE
Add an additional color code priority. Setting additionalColorCode and additionalColorCodePriority adds an entry.
1.3.6.1.4.1.161.19.3.2.1.153INTEGER {primary(1), secondary(2), tertiary(3)}read-writecurrent
deleteAdditionalColorCode
OBJECT-TYPE
Delete an additional color code.
1.3.6.1.4.1.161.19.3.2.1.154INTEGER (0..254)read-writecurrent
bCastMIRUnits
OBJECT-TYPE
Units of Broadcast/ Multicast MIR value. Set units first and then bCastMIR
1.3.6.1.4.1.161.19.3.2.1.155INTEGER {kbps(0), pps(1)}read-writecurrent
rfScanListTable
OBJECT-TYPE
The list of configured scanning frequencies on the SM or BHS.
1.3.6.1.4.1.161.19.3.2.1.156not-accessiblecurrent
rfScanListEntry
OBJECT-TYPE
Entry of configured scanning frequencies on the SM or BHS.
1.3.6.1.4.1.161.19.3.2.1.156.1not-accessiblecurrent
rfScanListFrequency
OBJECT-TYPE
RF scan list. The frequencies vary by product and region.
1.3.6.1.4.1.161.19.3.2.1.156.1.1INTEGER (0..9000000)read-writecurrent
txPowerControl
OBJECT-TYPE
Enable/Disable Automatic control of SM TX power. Engineering use only.
1.3.6.1.4.1.161.19.3.2.1.157INTEGER {disable(0), enable(1)}read-writecurrent
bridgeTableSize
OBJECT-TYPE
Bridge Table Size : 4 -- 4096.
1.3.6.1.4.1.161.19.3.2.1.158INTEGER (4..4096)read-writecurrent
bridgeTableRestrict
OBJECT-TYPE
Restrict forwarding packets from hosts for which MAC address is not in the bridge table.
1.3.6.1.4.1.161.19.3.2.1.159INTEGER {disable(0), enable(1)}read-writecurrent
maxTxPowerEnable
OBJECT-TYPE
Enable Max Tx Power configuration. This is used with OID maxTxPower to set the max transmit power. This might be required in certain regions and frequency bands. See User Guide for more information. Enabling this will not allow a radio to transmit above its EIRP limit. The AP's Transmit Power Control may still adjust the Tx power down. SM only.
1.3.6.1.4.1.161.19.3.2.1.160INTEGER {disable(0), enable(1)}read-writecurrent
maxTxPower
OBJECT-TYPE
This OID is controled by OID maxTxPowerEnable. This might be required in certain regions and frequency bands. See user guide for more information. Setting this will not allow a radio to transmit above its EIRP limit. The AP's Transmit Power Control may still adjust the Tx power down. SM only.
1.3.6.1.4.1.161.19.3.2.1.161INTEGER (-30..27)read-writecurrent
whispSmStatus
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.2
sessionStatus
OBJECT-TYPE
SM registered or not.
1.3.6.1.4.1.161.19.3.2.2.1DisplayStringread-onlycurrent
rssi
OBJECT-TYPE
Radio signal strength index. FSK only.
1.3.6.1.4.1.161.19.3.2.2.2INTEGERread-onlycurrent
jitter
OBJECT-TYPE
A measure of multipath interference. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.2.2.3Gauge32 (0..15)read-onlycurrent
airDelay
OBJECT-TYPE
Round trip delay in bits.
1.3.6.1.4.1.161.19.3.2.2.4Unsigned32read-onlycurrent
radioSlicingSm
OBJECT-TYPE
This variable is deprecated.
1.3.6.1.4.1.161.19.3.2.2.5INTEGERread-onlyobsolete
radioTxGainSm
OBJECT-TYPE
Radio transmission gain setting. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.2.2.6INTEGERread-onlycurrent
calibrationStatus
OBJECT-TYPE
Varible deprecated. Please use calibrationStatusBox.
1.3.6.1.4.1.161.19.3.2.2.7DisplayStringread-onlydeprecated
radioDbm
OBJECT-TYPE
Rx Power level. For MIMO this is the combined power of the horizontal and vertical paths.
1.3.6.1.4.1.161.19.3.2.2.8DisplayStringread-onlycurrent
registeredToAp
OBJECT-TYPE
AP MAC address that the SM registered to.
1.3.6.1.4.1.161.19.3.2.2.9DisplayStringread-onlycurrent
dhcpCip
OBJECT-TYPE
Assigned IP address to DHCP client.
1.3.6.1.4.1.161.19.3.2.2.10IpAddressread-onlycurrent
dhcpSip
OBJECT-TYPE
Public DHCP server IP.
1.3.6.1.4.1.161.19.3.2.2.11IpAddressread-onlycurrent
dhcpClientLease
OBJECT-TYPE
DHCP client lease time.
1.3.6.1.4.1.161.19.3.2.2.12TimeTicksread-onlycurrent
dhcpCSMask
OBJECT-TYPE
Public DHCP server subnet mask.
1.3.6.1.4.1.161.19.3.2.2.13IpAddressread-onlycurrent
dhcpDfltRterIP
OBJECT-TYPE
Public default router IP address.
1.3.6.1.4.1.161.19.3.2.2.14IpAddressread-onlycurrent
dhcpcdns1
OBJECT-TYPE
Primary public domain name server.
1.3.6.1.4.1.161.19.3.2.2.15IpAddressread-onlycurrent
dhcpcdns2
OBJECT-TYPE
Secondary public domain name server.
1.3.6.1.4.1.161.19.3.2.2.16IpAddressread-onlycurrent
dhcpcdns3
OBJECT-TYPE
Third public domain name server.
1.3.6.1.4.1.161.19.3.2.2.17IpAddressread-onlycurrent
dhcpDomName
OBJECT-TYPE
Public domain name server.
1.3.6.1.4.1.161.19.3.2.2.18DisplayStringread-onlycurrent
dhcpServerTable
OBJECT-TYPE
The table of DHCP server hosts.
1.3.6.1.4.1.161.19.3.2.2.19not-accessiblecurrent
dhcpServerEntry
OBJECT-TYPE
Entry of DHCP server hosts.
1.3.6.1.4.1.161.19.3.2.2.19.1not-accessiblecurrent
hostIp
OBJECT-TYPE
DHCP server IP address.
1.3.6.1.4.1.161.19.3.2.2.19.1.1IpAddressread-onlycurrent
hostMacAddress
OBJECT-TYPE
Private host MAC address.
1.3.6.1.4.1.161.19.3.2.2.19.1.2PhysAddressread-onlycurrent
hostLease
OBJECT-TYPE
Lease time assigned by DHCP server host.
1.3.6.1.4.1.161.19.3.2.2.19.1.3TimeTicksread-onlycurrent
adaptRate
OBJECT-TYPE
VC adapt rate.
1.3.6.1.4.1.161.19.3.2.2.20DisplayStringread-onlycurrent
radioDbmInt
OBJECT-TYPE
Radio power level(integer). For MIMO radios this is the combined power of the horiztontal and vertical paths.
1.3.6.1.4.1.161.19.3.2.2.21INTEGERread-onlycurrent
dfsStatus
OBJECT-TYPE
Dynamic frequency shifting status. For DFS Radio only.
1.3.6.1.4.1.161.19.3.2.2.22DisplayStringread-onlycurrent
radioTxPwr
OBJECT-TYPE
Tx Power level. Valid for FSK and OFDM SMs.
1.3.6.1.4.1.161.19.3.2.2.23DisplayStringread-onlycurrent
activeRegion
OBJECT-TYPE
The active region of the radio.
1.3.6.1.4.1.161.19.3.2.2.24DisplayStringread-onlycurrent
snmpBerLevel
OBJECT-TYPE
BER level. For PMP 450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM For non PMP 450: 2=2 level BER, 4=4 level BER.
1.3.6.1.4.1.161.19.3.2.2.25INTEGER {twoLevelOrMimoQPSK(2), fourLevelOrMimo16QAM(4), mimo64QAM(6), mimo256QAM(8)}read-onlycurrent
nbBitsRcvd
OBJECT-TYPE
Number of BER bits received (non MIMO platforms only).
1.3.6.1.4.1.161.19.3.2.2.26Counter64read-onlycurrent
nbPriBitsErr
OBJECT-TYPE
Number of Primary bit errors (non MIMO platforms only).
1.3.6.1.4.1.161.19.3.2.2.27Counter32read-onlycurrent
nbSndBitsErr
OBJECT-TYPE
Number of secondary bit errors (non MIMO platforms only).
1.3.6.1.4.1.161.19.3.2.2.28Counter32read-onlycurrent
primaryBER
OBJECT-TYPE
Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate.
1.3.6.1.4.1.161.19.3.2.2.29INTEGERread-onlyobsolete
secondaryBER
OBJECT-TYPE
Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate.
1.3.6.1.4.1.161.19.3.2.2.30INTEGERread-onlyobsolete
totalBER
OBJECT-TYPE
Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate.
1.3.6.1.4.1.161.19.3.2.2.31INTEGERread-onlyobsolete
minRSSI
OBJECT-TYPE
Measured Min. RSSI. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.2.2.32INTEGERread-onlycurrent
maxRSSI
OBJECT-TYPE
Measured Max. RSSI. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.2.2.33INTEGERread-onlycurrent
minJitter
OBJECT-TYPE
Measured Min. Jitter. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.2.2.34Gauge32 (0..15)read-onlycurrent
maxJitter
OBJECT-TYPE
Measured Max. Jitter. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.2.2.35Gauge32 (0..15)read-onlycurrent
smSessionTimer
OBJECT-TYPE
SM current session timer.
1.3.6.1.4.1.161.19.3.2.2.36TimeTicksread-onlycurrent
pppoeSessionStatus
OBJECT-TYPE
Current PPPoE Session Status
1.3.6.1.4.1.161.19.3.2.2.37DisplayStringread-onlycurrent
pppoeSessionID
OBJECT-TYPE
Current PPPoE Session ID
1.3.6.1.4.1.161.19.3.2.2.38INTEGERread-onlycurrent
pppoeIPCPAddress
OBJECT-TYPE
Current PPPoE IPCP IP Address
1.3.6.1.4.1.161.19.3.2.2.39IpAddressread-onlycurrent
pppoeMTUOverrideEn
OBJECT-TYPE
Current PPPoE MTU Override Setting
1.3.6.1.4.1.161.19.3.2.2.40INTEGER {disabled(0), enabled(1)}read-onlycurrent
pppoeMTUValue
OBJECT-TYPE
Current PPPoE MTU Value
1.3.6.1.4.1.161.19.3.2.2.41INTEGERread-onlycurrent
pppoeTimerTypeValue
OBJECT-TYPE
Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer.
1.3.6.1.4.1.161.19.3.2.2.42INTEGER {disabled(0), keepAlive(1), idleTimeout(2)}read-onlycurrent
pppoeTimeoutValue
OBJECT-TYPE
Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes.
1.3.6.1.4.1.161.19.3.2.2.43INTEGERread-onlycurrent
pppoeDNSServer1
OBJECT-TYPE
PPPoE DNS Server 1
1.3.6.1.4.1.161.19.3.2.2.44IpAddressread-onlycurrent
pppoeDNSServer2
OBJECT-TYPE
PPPoE DNS Server 2
1.3.6.1.4.1.161.19.3.2.2.45IpAddressread-onlycurrent
pppoeControlBytesSent
OBJECT-TYPE
PPPoE Control Bytes Sent
1.3.6.1.4.1.161.19.3.2.2.46Counter32read-onlycurrent
pppoeControlBytesReceived
OBJECT-TYPE
PPPoE Control Bytes Received
1.3.6.1.4.1.161.19.3.2.2.47Counter32read-onlycurrent
pppoeDataBytesSent
OBJECT-TYPE
PPPoE Data Bytes Sent
1.3.6.1.4.1.161.19.3.2.2.48Counter32read-onlycurrent
pppoeDataBytesReceived
OBJECT-TYPE
PPPoE Data Bytes Received
1.3.6.1.4.1.161.19.3.2.2.49Counter32read-onlycurrent
pppoeEnabledStatus
OBJECT-TYPE
PPPoE Enabled
1.3.6.1.4.1.161.19.3.2.2.50INTEGER {disabled(0), enabled(1)}read-onlycurrent
pppoeTCPMSSClampEnableStatus
OBJECT-TYPE
PPPoE TCP MSS Clamping Enable
1.3.6.1.4.1.161.19.3.2.2.51INTEGER {disabled(0), enabled(1)}read-onlycurrent
pppoeACNameStatus
OBJECT-TYPE
Current PPPoE Access Concentrator In Use
1.3.6.1.4.1.161.19.3.2.2.52DisplayStringread-onlycurrent
pppoeSvcNameStatus
OBJECT-TYPE
Current PPPoE Service Name In Use
1.3.6.1.4.1.161.19.3.2.2.53DisplayStringread-onlycurrent
pppoeSessUptime
OBJECT-TYPE
Uptime of current PPPoE Session in ticks
1.3.6.1.4.1.161.19.3.2.2.54TimeTicksread-onlycurrent
primaryBERDisplay
OBJECT-TYPE
Measured Primary Bit Error Rate. Non MIMO platforms only.
1.3.6.1.4.1.161.19.3.2.2.55DisplayStringread-onlycurrent
secondaryBERDisplay
OBJECT-TYPE
Measured Secondary Bit Error Rate. FSK platforms only.
1.3.6.1.4.1.161.19.3.2.2.56DisplayStringread-onlycurrent
totalBERDisplay
OBJECT-TYPE
Measured Total Bit Error Rate. For MIMO this is combined both paths.
1.3.6.1.4.1.161.19.3.2.2.57DisplayStringread-onlycurrent
minRadioDbm
OBJECT-TYPE
Maximum receive power of beacon in dBm. For MIMO radios, this is only available in the vertical path.
1.3.6.1.4.1.161.19.3.2.2.58INTEGERread-onlycurrent
maxRadioDbm
OBJECT-TYPE
Maximum receive power in dBm (rounded to nearest integer).
1.3.6.1.4.1.161.19.3.2.2.59INTEGERread-onlycurrent
pppoeSessIdleTime
OBJECT-TYPE
Idle Time of current PPPoE Session in ticks
1.3.6.1.4.1.161.19.3.2.2.60TimeTicksread-onlycurrent
radioDbmAvg
OBJECT-TYPE
Average Receive Power of the AP's beacon in dBm. OFDM Radios only. For MIMO this is only the verical path, as the beacon is not transmitted on horizontal.
1.3.6.1.4.1.161.19.3.2.2.61INTEGERread-onlycurrent
zoltarFPGAFreqOffset
OBJECT-TYPE
FPGA peek of 70001088
1.3.6.1.4.1.161.19.3.2.2.62INTEGERread-onlycurrent
zoltarSWFreqOffset
OBJECT-TYPE
FPGA peek of 7000108C
1.3.6.1.4.1.161.19.3.2.2.63INTEGERread-onlycurrent
airDelayns
OBJECT-TYPE
Round trip delay in nanoseconds.
1.3.6.1.4.1.161.19.3.2.2.64Unsigned32read-onlycurrent
currentColorCode
OBJECT-TYPE
The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered.
1.3.6.1.4.1.161.19.3.2.2.65INTEGERread-onlycurrent
currentColorCodePri
OBJECT-TYPE
The current priority of the Registered color code
1.3.6.1.4.1.161.19.3.2.2.66INTEGER {none(0), primary(1), secondary(2), tertiary(3)}read-onlycurrent
currentChanFreq
OBJECT-TYPE
The Current Channel Frequency of the AP/BHM when in session.
1.3.6.1.4.1.161.19.3.2.2.67Unsigned32read-onlycurrent
linkQualityBeacon
OBJECT-TYPE
Engineering only. Link Quality for incoming beacons. For Gen II OFDM radios and forward. For PMP 450 and forward this is vertical path.
1.3.6.1.4.1.161.19.3.2.2.68DisplayStringread-onlycurrent
dhcpServerPktXmt
OBJECT-TYPE
Number of packets transmitted by SM DHCP Server
1.3.6.1.4.1.161.19.3.2.2.72Counter32read-onlycurrent
dhcpServerPktRcv
OBJECT-TYPE
Number of packets received by SM DHCP Server
1.3.6.1.4.1.161.19.3.2.2.73Counter32read-onlycurrent
dhcpServerPktToss
OBJECT-TYPE
Number of packets tossed by SM DHCP Server
1.3.6.1.4.1.161.19.3.2.2.74Counter32read-onlycurrent
receiveFragmentsModulationPercentage
OBJECT-TYPE
Engineering use only. The percentage of recent fragments received at which modulation. For Gen II OFDM only and forward.
1.3.6.1.4.1.161.19.3.2.2.86DisplayStringread-onlycurrent
fragmentsReceived1XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 1x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.87Counter32read-onlycurrent
fragmentsReceived2XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 2x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.88Counter32read-onlycurrent
fragmentsReceived3XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 3x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.89Counter32read-onlycurrent
fragmentsReceived4XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 4x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.90Counter32read-onlycurrent
linkQualityData1XVertical
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for QPSK modulation (1X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.91DisplayStringread-onlycurrent
linkQualityData2XVertical
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for 16-QAM modulation (2X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.92DisplayStringread-onlycurrent
linkQualityData3XVertical
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for 64-QAM modulation (3X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.93DisplayStringread-onlycurrent
linkQualityData4XVertical
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for 256-QAM modulation (4X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.2.2.94DisplayStringread-onlycurrent
signalToNoiseRatioSMVertical
OBJECT-TYPE
An estimated signal to noise ratio based on the last received data. For GenII OFDM only and forward. For MIMO this is the vertical antenna. Will return zero if Signal to Noise Ratio Calculation is disabled.
1.3.6.1.4.1.161.19.3.2.2.95INTEGERread-onlycurrent
rfStatTxSuppressionCount
OBJECT-TYPE
RF Scheduler Stats DFS TX Suppression Count
1.3.6.1.4.1.161.19.3.2.2.96Counter32read-onlycurrent
bridgecbUplinkCreditRate
OBJECT-TYPE
Sustained uplink data rate.
1.3.6.1.4.1.161.19.3.2.2.97Unsigned32read-onlycurrent
bridgecbUplinkCreditLimit
OBJECT-TYPE
Uplink Burst Allocation.
1.3.6.1.4.1.161.19.3.2.2.98Unsigned32read-onlycurrent
bridgecbDownlinkCreditRate
OBJECT-TYPE
Sustained uplink data rate.
1.3.6.1.4.1.161.19.3.2.2.99Unsigned32read-onlycurrent
bridgecbDownlinkCreditLimit
OBJECT-TYPE
Uplink Burst Allocation.
1.3.6.1.4.1.161.19.3.2.2.100Unsigned32read-onlycurrent
mimoQpskBerDisplay
OBJECT-TYPE
QPSK BER statistics. MIMO platforms only.
1.3.6.1.4.1.161.19.3.2.2.101DisplayStringread-onlycurrent
mimo16QamBerDisplay
OBJECT-TYPE
16-QAM BER statistics MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.102DisplayStringread-onlycurrent
mimo64QamBerDisplay
OBJECT-TYPE
64-QAM BER statistics MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.103DisplayStringread-onlycurrent
mimo256QamBerDisplay
OBJECT-TYPE
256-QAM BER statistics MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.104DisplayStringread-onlycurrent
mimoBerRcvModulationType
OBJECT-TYPE
Receive modulation type. MIMO platforms only.
1.3.6.1.4.1.161.19.3.2.2.105DisplayStringread-onlycurrent
signalToNoiseRatioSMHorizontal
OBJECT-TYPE
An estimated signal to noise ratio based on the last received data for horizontal antenna. MIMO radios only. Will return zero if Signal to Noise Ratio Calculation is disabled. When operating in MIMO-A will return 0.
1.3.6.1.4.1.161.19.3.2.2.106INTEGERread-onlycurrent
maxRadioDbmDeprecated
OBJECT-TYPE
This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated and kept for backwards compatibility.
1.3.6.1.4.1.161.19.3.2.2.107INTEGERread-onlydeprecated
signalStrengthRatio
OBJECT-TYPE
Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only.
1.3.6.1.4.1.161.19.3.2.2.108DisplayStringread-onlycurrent
fragmentsReceived1XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 1x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.109Counter32read-onlycurrent
fragmentsReceived2XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 2x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.110Counter32read-onlycurrent
fragmentsReceived3XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 3x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.111Counter32read-onlycurrent
fragmentsReceived4XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 4x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.112Counter32read-onlycurrent
linkQualityData1XHorizontal
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for QPSK modulation (1X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.113DisplayStringread-onlycurrent
linkQualityData2XHorizontal
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for 16-QAM modulation (2X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.114DisplayStringread-onlycurrent
linkQualityData3XHorizontal
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for 64-QAM modulation (3X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.115DisplayStringread-onlycurrent
linkQualityData4XHorizontal
OBJECT-TYPE
Engineering use only. Link Quality for the data VC for 256-QAM modulation (4X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical.
1.3.6.1.4.1.161.19.3.2.2.116DisplayStringread-onlycurrent
radioDbmHorizontal
OBJECT-TYPE
Receive power level of the horizontal antenna in dBm. MIMO radios only.
1.3.6.1.4.1.161.19.3.2.2.117DisplayStringread-onlycurrent
radioDbmVertical
OBJECT-TYPE
Receive power level of the vertical antenna in dBm. MIMO radios only.
1.3.6.1.4.1.161.19.3.2.2.118DisplayStringread-onlycurrent
bridgecbDownlinkMaxBurstBitRate
OBJECT-TYPE
Maximum burst downlink rate.
1.3.6.1.4.1.161.19.3.2.2.119Unsigned32read-onlycurrent
bridgecbUplinkMaxBurstBitRate
OBJECT-TYPE
Maximum burst uplink Rate.
1.3.6.1.4.1.161.19.3.2.2.120Unsigned32read-onlycurrent
currentCyclicPrefix
OBJECT-TYPE
The Current Cyclic Prefix of the AP/BHM when in session.
1.3.6.1.4.1.161.19.3.2.2.121INTEGER {one-quarter(0), one-eighth(1), one-sixteenth(2)}read-onlycurrent
currentBandwidth
OBJECT-TYPE
The Current Bandwidth of the AP/BHM when in session.
1.3.6.1.4.1.161.19.3.2.2.122INTEGER {bandwidth5mhz(1), bandwidth7MHz(2), bandwidth10mhz(3), bandwidth15mhz(4), bandwidth20mhz(5), bandwidth30mhz(6), bandwidth40MHz(7)}read-onlycurrent
berPwrRxFPGAPathA
OBJECT-TYPE
BER power level on FPGA Rx Path A of SM. Engineering Use Only.
1.3.6.1.4.1.161.19.3.2.2.123INTEGERread-onlycurrent
berPwrRxFPGAPathB
OBJECT-TYPE
BER power level on FPGA Rx Path B of SM. Engineering Use Only.
1.3.6.1.4.1.161.19.3.2.2.124INTEGERread-onlycurrent
rawBERPwrRxPathA
OBJECT-TYPE
Raw unadjusted BER power level on FPGA Rx Path A of SM. Engineering Use Only.
1.3.6.1.4.1.161.19.3.2.2.125INTEGERread-onlycurrent
rawBERPwrRxPathB
OBJECT-TYPE
Raw unadjusted BER power level on FPGA Rx Path B of SM. Engineering Use Only.
1.3.6.1.4.1.161.19.3.2.2.126INTEGERread-onlycurrent
radioModeStatus
OBJECT-TYPE
The current radio mode that SM is operating in. PMP 430 SMs only. As of 14.2, the 430 SM only supports PMP 450 interoperability mode, so this will only return pmp450Interoperability.
1.3.6.1.4.1.161.19.3.2.2.127INTEGER {undefined(0), pmp430(1), pmp450Interoperability(2)}read-onlydeprecated
adaptRateLowPri
OBJECT-TYPE
The current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO
1.3.6.1.4.1.161.19.3.2.2.128INTEGER {noSession(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)}read-onlycurrent
adaptRateHighPri
OBJECT-TYPE
The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO
1.3.6.1.4.1.161.19.3.2.2.129INTEGER {noHighPriorityChannel(-1), noSession(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)}read-onlycurrent
bitErrorsQSPKpathA
OBJECT-TYPE
Number of bit errors received from BER packet at QPSK path A. Valid MIMO platforms only.
1.3.6.1.4.1.161.19.3.2.2.130Counter64read-onlycurrent
bitErrorsQSPKpathB
OBJECT-TYPE
Number of bit errors received from BER packet at QPSK path B. Valid MIMO platforms only.
1.3.6.1.4.1.161.19.3.2.2.131Counter64read-onlycurrent
bitErrors16QAMpathA
OBJECT-TYPE
Number of bit errors received from BER packet at 16-QAM path A. Valid MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.132Counter64read-onlycurrent
bitErrors16QAMpathB
OBJECT-TYPE
Number of bit errors received from BER packet at 16-QAM path B. Valid MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.133Counter64read-onlycurrent
bitErrors64QAMpathA
OBJECT-TYPE
Number of bit errors received from BER packet at 64-QAM path A. Valid MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.134Counter64read-onlycurrent
bitErrors64QAMpathB
OBJECT-TYPE
Number of bit errors received from BER packet at 64-QAM path B. Valid MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.135Counter64read-onlycurrent
bitErrors256QAMpathA
OBJECT-TYPE
Number of bit errors received from BER packet at 256-QAM path A. Valid MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.136Counter64read-onlycurrent
bitErrors256QAMpathB
OBJECT-TYPE
Number of bit errors received from BER packet at 256-QAM path B. Valid MIMO platforms only. Engineering use only.
1.3.6.1.4.1.161.19.3.2.2.137Counter64read-onlycurrent
bitsReceivedPerPathModulation
OBJECT-TYPE
Number of bit received from BER. To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID. To get combined BER add errors and divide by this multiplied by each path and modulation. i.e. MIMO QPSK combined BER = ((errors on path A) + (errors on path B))/(bits recieved per path modulation * 2) Valid MIMO platforms only.
1.3.6.1.4.1.161.19.3.2.2.138Counter64read-onlycurrent
beaconsPercentReceived
OBJECT-TYPE
The current percentage of beacons that the SM/BHS successfully receiving.
1.3.6.1.4.1.161.19.3.2.2.139INTEGER (0..100)read-onlycurrent
mapsPercentReceived
OBJECT-TYPE
PMP 450 only. The current percentage of scheduling maps that the SM/BHS successfully receiving.
1.3.6.1.4.1.161.19.3.2.2.140INTEGER (0..100)read-onlycurrent
natTslTableEntries
OBJECT-TYPE
Number of Entries in NAT Translation Table.
1.3.6.1.4.1.161.19.3.2.2.141INTEGERread-onlycurrent
maxReceivePower
OBJECT-TYPE
Maximum receive power level for this session. MIMO radios only.
1.3.6.1.4.1.161.19.3.2.2.142DisplayStringread-onlycurrent
beaconsPercentMinReceived
OBJECT-TYPE
The percentage of the least number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes.
1.3.6.1.4.1.161.19.3.2.2.143INTEGER (0..100)read-onlycurrent
beaconsPercentMaxReceived
OBJECT-TYPE
The percentage of the maximum number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes.
1.3.6.1.4.1.161.19.3.2.2.144INTEGER (0..100)read-onlycurrent
beaconsPercentReceivedSnapshot
OBJECT-TYPE
The percentage of beacons that the SM/BHS successfully received for the last 15 minutes. This will be updated only once in 15 minutes.
1.3.6.1.4.1.161.19.3.2.2.145INTEGER (0..100)read-onlycurrent
smSectorID
OBJECT-TYPE
The current Sector ID of the Registered AP/BHM. A value of -1 is return when the device is not registered or AP/BHM does not support Sector ID.
1.3.6.1.4.1.161.19.3.2.2.146INTEGERread-onlycurrent
scanCycleCount
OBJECT-TYPE
The number of scan cycles. This increments after the SM completes scanning every configured frequency and channel bandwidth.
1.3.6.1.4.1.161.19.3.2.2.147Counter32read-onlycurrent
bridgeCbErrStatBridgeDropCount
OBJECT-TYPE
Packet drop count for hosts with MAC address not in bridge table
1.3.6.1.4.1.161.19.3.2.2.148Counter32read-onlycurrent
whispSmGroups
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.3
whispSmEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.4
whispSmDfsEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.4.1
whispSmSpAnEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.4.2
whispSmDHCPClientEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.4.3
whispMappingTable
OBJECT-TYPE
NAT port mapping information table.
1.3.6.1.4.1.161.19.3.2.5not-accessiblecurrent
whispMappingEntry
OBJECT-TYPE
Mapping table entry.
1.3.6.1.4.1.161.19.3.2.5.1not-accessiblecurrent
tableIndex
OBJECT-TYPE
User information table index.
1.3.6.1.4.1.161.19.3.2.5.1.1INTEGER (1..2147483647)read-onlycurrent
protocol
OBJECT-TYPE
Protocol type: 0:both UDP and TCP, 1:UDP, 2:TCP.
1.3.6.1.4.1.161.19.3.2.5.1.2INTEGERread-writecurrent
port
OBJECT-TYPE
Application port number. e.g. 23=telnet, 21=ftp etc. Should be a positive integer.
1.3.6.1.4.1.161.19.3.2.5.1.3INTEGERread-writecurrent
localIp
OBJECT-TYPE
IP of local host to which the incoming packet mapped to an application should be forwarded.
1.3.6.1.4.1.161.19.3.2.5.1.4IpAddressread-writecurrent
whispSmTranslationTable
OBJECT-TYPE
Translation Table.
1.3.6.1.4.1.161.19.3.2.6not-accessiblecurrent
whispSmTranslationTableEntry
OBJECT-TYPE
Translation Table Entry.
1.3.6.1.4.1.161.19.3.2.6.1not-accessiblecurrent
whispTranslationTableIndex
OBJECT-TYPE
Index into translation table.
1.3.6.1.4.1.161.19.3.2.6.1.1INTEGER (1..127)read-onlycurrent
whispTranslationTableMacAddr
OBJECT-TYPE
MAC Address of the registered entity.
1.3.6.1.4.1.161.19.3.2.6.1.2MacAddressread-onlycurrent
whispTranslationTableIpAddr
OBJECT-TYPE
Ip Address of the registered entity.
1.3.6.1.4.1.161.19.3.2.6.1.3IpAddressread-onlycurrent
whispTranslationTableAge
OBJECT-TYPE
Age of the registered entity.
1.3.6.1.4.1.161.19.3.2.6.1.4Counter32read-onlycurrent
whispSmSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.7
certTable
OBJECT-TYPE
The table of CA Certificates on SM.
1.3.6.1.4.1.161.19.3.2.7.1not-accessiblecurrent
certEntry
OBJECT-TYPE
Entry of Certifcates.
1.3.6.1.4.1.161.19.3.2.7.1.1not-accessiblecurrent
certIndex
OBJECT-TYPE
User information table index.
1.3.6.1.4.1.161.19.3.2.7.1.1.1INTEGER (1..2)read-onlycurrent
cert
OBJECT-TYPE
0: Inactive 1: Active
1.3.6.1.4.1.161.19.3.2.7.1.1.2INTEGER {inactive(0), active(1)}read-onlycurrent
action
OBJECT-TYPE
0: No Operation 1: Delete Certificate
1.3.6.1.4.1.161.19.3.2.7.1.1.3INTEGER {noop(0), delete(1)}read-writecurrent
certificateDN
OBJECT-TYPE
Distinguished Name of Certificate 2
1.3.6.1.4.1.161.19.3.2.7.1.1.4DisplayStringread-onlycurrent
numAuthCerts
OBJECT-TYPE
can have a max value of 2
1.3.6.1.4.1.161.19.3.2.7.2INTEGERread-onlycurrent
authenticationEnforce
OBJECT-TYPE
enforce SM to register with specifed Auth Enabled AP
1.3.6.1.4.1.161.19.3.2.7.3INTEGER {disable(0), aaa(1), presharedkey(2)}read-writecurrent
phase1
OBJECT-TYPE
Select the outer method for EAP Authentication. Note: PEAP is not supported for MPC860 platform.
1.3.6.1.4.1.161.19.3.2.7.4INTEGER {eapttls(0), eapMSChapV2(1), eappeap(2)}read-writecurrent
phase2
OBJECT-TYPE
Select the outer method for EAP Authentication
1.3.6.1.4.1.161.19.3.2.7.5INTEGER {pap(0), chap(1), mschapv2(2)}read-writecurrent
authOuterId
OBJECT-TYPE
EAP Peer Username
1.3.6.1.4.1.161.19.3.2.7.6OCTET STRING (SIZE(0..253))read-writecurrent
authPassword
OBJECT-TYPE
EAP Peer password
1.3.6.1.4.1.161.19.3.2.7.7DisplayStringread-writecurrent
authUsername
OBJECT-TYPE
EAP Peer Identity
1.3.6.1.4.1.161.19.3.2.7.8DisplayStringread-writecurrent
useRealm
OBJECT-TYPE
Enable or disable the use of realm option.
1.3.6.1.4.1.161.19.3.2.7.9INTEGER {disable(0), enable(1)}read-writecurrent
realm
OBJECT-TYPE
EAP Peer Realm
1.3.6.1.4.1.161.19.3.2.7.10DisplayStringread-writecurrent
whispSmControls
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.2.8
clearLinkStats
OBJECT-TYPE
Setting this to a nonzero value will clear the link stats.
1.3.6.1.4.1.161.19.3.2.8.1INTEGERread-writecurrent
rescan
OBJECT-TYPE
Setting this to a nonzero value will start the rescan. Warning: If currently connected, this will cause the SM/BHS to drop session
1.3.6.1.4.1.161.19.3.2.8.2INTEGERread-writecurrent
apEvalControl
OBJECT-TYPE
Setting this to 0 will clear the AP Evaluation Data.
1.3.6.1.4.1.161.19.3.2.8.3INTEGERread-writecurrent
whispSmColorCodeTable
OBJECT-TYPE
Additional color code Table.
1.3.6.1.4.1.161.19.3.2.9not-accessiblecurrent
whispSmColorCodeEntry
OBJECT-TYPE
Additional Color code Entry.
1.3.6.1.4.1.161.19.3.2.9.1not-accessiblecurrent
entryColorCode
OBJECT-TYPE
color code.
1.3.6.1.4.1.161.19.3.2.9.1.1INTEGER (0..254)read-onlycurrent
entryColorCodePriority
OBJECT-TYPE
color code priority.
1.3.6.1.4.1.161.19.3.2.9.1.2INTEGER {primary(1), secondary(2), tertiary(3)}read-onlycurrent
whispSmAPEvalTable
OBJECT-TYPE
AP Eval List.
1.3.6.1.4.1.161.19.3.2.10not-accessiblecurrent
whispSmAPEvalEntry
OBJECT-TYPE
Evaluation of AP and BHM Entries
1.3.6.1.4.1.161.19.3.2.10.1not-accessiblecurrent
evalIndex
OBJECT-TYPE
Index of the radio seen in the scan
1.3.6.1.4.1.161.19.3.2.10.1.1INTEGER (1..16)read-onlycurrent
evalFrequency
OBJECT-TYPE
Transmit Frequency in KHz
1.3.6.1.4.1.161.19.3.2.10.1.2INTEGERread-onlycurrent
evalChannelBandwidth
OBJECT-TYPE
Channel Bandwidth
1.3.6.1.4.1.161.19.3.2.10.1.3INTEGER {bandwidth3Point5MHz(0), bandwidth5MHz(1), bandwidth7MHz(2), bandwidth10MHz(3), bandwidth15MHz(4), bandwidth20MHz(5), bandwidth30MHz(6), bandwidth40MHz(7)}read-onlycurrent
evalCyclicPrefix
OBJECT-TYPE
Cyclic Prefix value, for OFDM Radios only.
1.3.6.1.4.1.161.19.3.2.10.1.4INTEGER {one-quarter(0), one-eighth(1), one-sixteenth(2)}read-onlycurrent
evalESN
OBJECT-TYPE
Radio ESN
1.3.6.1.4.1.161.19.3.2.10.1.5PhysAddressread-onlycurrent
evalRegion
OBJECT-TYPE
Region
1.3.6.1.4.1.161.19.3.2.10.1.6DisplayStringread-onlycurrent
evalBeaconReceivePowerCombined
OBJECT-TYPE
Beacon Receive Power Combined in dBm(rounded to nearest integer)
1.3.6.1.4.1.161.19.3.2.10.1.7INTEGERread-onlycurrent
evalBeaconReceivePowerH
OBJECT-TYPE
Beacon Receive Power in dBm(rounded to nearest integer) for Path H(MIMO Radios only)
1.3.6.1.4.1.161.19.3.2.10.1.8INTEGERread-onlycurrent
evalBeaconReceivePowerV
OBJECT-TYPE
Beacon Receive Power in dBm(rounded to nearest integer) for Path V(MIMO Radios only)
1.3.6.1.4.1.161.19.3.2.10.1.9INTEGERread-onlycurrent
evalFECEnable
OBJECT-TYPE
Forward Error Correction Enabled Status. Note, this is always enabled on 450 and forward.
1.3.6.1.4.1.161.19.3.2.10.1.10INTEGER {disabled(0), enabled(1)}read-onlycurrent
evalType
OBJECT-TYPE
Radio Type (Point-to-Point or Multipoint)
1.3.6.1.4.1.161.19.3.2.10.1.11INTEGER {multipoint(0), point-to-point(1)}read-onlycurrent
evalAvail
OBJECT-TYPE
Returns True if seen on the previous SM's scan
1.3.6.1.4.1.161.19.3.2.10.1.12INTEGER {false(0), true(1)}read-onlycurrent
evalAge
OBJECT-TYPE
Number of minutes since index was last seen
1.3.6.1.4.1.161.19.3.2.10.1.13INTEGERread-onlycurrent
evalLockout
OBJECT-TYPE
Number of minutes radio is currently locked out
1.3.6.1.4.1.161.19.3.2.10.1.14INTEGERread-onlycurrent
evalRegFail
OBJECT-TYPE
Registration Fail Count
1.3.6.1.4.1.161.19.3.2.10.1.15INTEGERread-onlycurrent
evalRange
OBJECT-TYPE
Range in feet
1.3.6.1.4.1.161.19.3.2.10.1.16INTEGERread-onlycurrent
evalMaxRange
OBJECT-TYPE
Max Range is in miles
1.3.6.1.4.1.161.19.3.2.10.1.17INTEGERread-onlycurrent
evalTxBER
OBJECT-TYPE
Radio is transmitting Bit Error Rate symbol or not Note: This is always enabled on 450 and forward
1.3.6.1.4.1.161.19.3.2.10.1.18INTEGER {false(0), true(1)}read-onlycurrent
evalEBCast
OBJECT-TYPE
Broadcast Encryption status
1.3.6.1.4.1.161.19.3.2.10.1.19INTEGER {false(0), true(1)}read-onlycurrent
evalSessionCount
OBJECT-TYPE
Session Count
1.3.6.1.4.1.161.19.3.2.10.1.20INTEGERread-onlycurrent
evalNoLuid
OBJECT-TYPE
Number of times the registration request has been rejected due to No Luid
1.3.6.1.4.1.161.19.3.2.10.1.21INTEGERread-onlycurrent
evalOutOfRange
OBJECT-TYPE
Number of times the registration request has been rejected due to out of range
1.3.6.1.4.1.161.19.3.2.10.1.22INTEGERread-onlycurrent
evalAuthFail
OBJECT-TYPE
Number of times the registration request has been rejected due to authentication failure
1.3.6.1.4.1.161.19.3.2.10.1.23INTEGERread-onlycurrent
evalEncryptFail
OBJECT-TYPE
Number of times the registration request has been rejected due to encrypt fail
1.3.6.1.4.1.161.19.3.2.10.1.24INTEGERread-onlycurrent
evalReScanReq
OBJECT-TYPE
Rescan request count
1.3.6.1.4.1.161.19.3.2.10.1.25INTEGERread-onlycurrent
evalLimitReached
OBJECT-TYPE
Number of times failed when trying to register with an limited AP maxed out
1.3.6.1.4.1.161.19.3.2.10.1.26INTEGERread-onlycurrent
evalNoVCs
OBJECT-TYPE
Number of times the registration request has been rejected due to No VCs
1.3.6.1.4.1.161.19.3.2.10.1.27INTEGERread-onlycurrent
evalVCReserveFail
OBJECT-TYPE
Number of times the registration request has been rejected due to VC reserve fail
1.3.6.1.4.1.161.19.3.2.10.1.28INTEGERread-onlycurrent
evalVCActFail
OBJECT-TYPE
Number of times the registration request has been rejected due to VC activate fail
1.3.6.1.4.1.161.19.3.2.10.1.29INTEGERread-onlycurrent
evalTxPower
OBJECT-TYPE
Transmit Power in dBm
1.3.6.1.4.1.161.19.3.2.10.1.30INTEGERread-onlycurrent
evalReceiveTargetLevel
OBJECT-TYPE
Receive Target Level(in dBm)(PMP only)
1.3.6.1.4.1.161.19.3.2.10.1.31INTEGERread-onlycurrent
evalColorCode
OBJECT-TYPE
Color Code
1.3.6.1.4.1.161.19.3.2.10.1.32INTEGERread-onlycurrent
evalBeaconVersion
OBJECT-TYPE
Beacon Version
1.3.6.1.4.1.161.19.3.2.10.1.33INTEGERread-onlycurrent
evalSectorUserCount
OBJECT-TYPE
Sector User Count(AP only)
1.3.6.1.4.1.161.19.3.2.10.1.34INTEGERread-onlycurrent
evalSyncSrc
OBJECT-TYPE
Sync Source(PMP only)
1.3.6.1.4.1.161.19.3.2.10.1.35INTEGER {generate-sync(0), gps-sync(1)}read-onlycurrent
evalNumULSlots
OBJECT-TYPE
Number of uplink slots
1.3.6.1.4.1.161.19.3.2.10.1.36INTEGERread-onlycurrent
evalNumDLSlots
OBJECT-TYPE
Number of downlink slots
1.3.6.1.4.1.161.19.3.2.10.1.37INTEGERread-onlycurrent
evalNumULContSlots
OBJECT-TYPE
Number of uplink contention slots(PMP only)
1.3.6.1.4.1.161.19.3.2.10.1.38INTEGERread-onlycurrent
evalICC
OBJECT-TYPE
Instalaton Color Code(PMP only)
1.3.6.1.4.1.161.19.3.2.10.1.39INTEGER {disabled(0), enabled(1)}read-onlycurrent
evalAuthentication
OBJECT-TYPE
Authentication Setting(PMP only)
1.3.6.1.4.1.161.19.3.2.10.1.40INTEGER {disabled(0), enabled(1)}read-onlycurrent
evalSMPPPoE
OBJECT-TYPE
SM PPPoE status(PMP only)
1.3.6.1.4.1.161.19.3.2.10.1.41INTEGER {not-supported(0), suported(1)}read-onlycurrent
evalPToPVLAN
OBJECT-TYPE
PToP VLAN
1.3.6.1.4.1.161.19.3.2.10.1.42INTEGER {not-supported(0), suported(1)}read-onlycurrent
evalFramePeriod
OBJECT-TYPE
Frame Period
1.3.6.1.4.1.161.19.3.2.10.1.43INTEGER {twoPointFiveMs(0), fiveMs(1)}read-onlycurrent

Notifications

NameOIDStatus
whispRadarDetected
NOTIFICATION-TYPE
Radar detected transmit stopped.
1.3.6.1.4.1.161.19.3.2.4.1.1current
whispRadarEnd
NOTIFICATION-TYPE
Radar ended back to normal transmit.
1.3.6.1.4.1.161.19.3.2.4.1.2current
enterSpectrumAnalysis
NOTIFICATION-TYPE
Entering spectrum analysis. physAddress - MAC address of the SM
1.3.6.1.4.1.161.19.3.2.4.2.1current
availableSpectrumAnalysis
NOTIFICATION-TYPE
Spectrum analysis is complete, SM is re-registered with AP and results are available. physAddress - MAC address of the SM
1.3.6.1.4.1.161.19.3.2.4.2.2current
smNatWanDHCPClientEvent
NOTIFICATION-TYPE
NAT WAN DHCP Client has received a new address via DHCP.
1.3.6.1.4.1.161.19.3.2.4.3.1current
smNatRFPubDHCPClientEvent
NOTIFICATION-TYPE
NAT RF Public DHCP Client has received a new address via DHCP.
1.3.6.1.4.1.161.19.3.2.4.3.2current

Conformance

NameOIDStatus
whispSmConfigGroup
OBJECT-GROUP
Canopy Subscriber Module configuration group.
1.3.6.1.4.1.161.19.3.2.3.1current
whispSmStatusGroup
OBJECT-GROUP
Canopy Subscriber Module status group.
1.3.6.1.4.1.161.19.3.2.3.2current
whispSmNotifGroup
NOTIFICATION-GROUP
WHiSP SMs notification group.
1.3.6.1.4.1.161.19.3.2.3.3current
whispMappingTableGroup
OBJECT-GROUP
Canopy SM NAT port mapping Table group.
1.3.6.1.4.1.161.19.3.2.3.4current