MIBs Depot

WHISP-APS-MIB

Registered at
1.3.6.1.4.1.161.19.1.1.12
1.3.6.1.4.1.161.19.3.1.1
1.3.6.1.4.1.161.19.3.1.2
1.3.6.1.4.1.161.19.3.1.3
1.3.6.1.4.1.161.19.3.1.5
1.3.6.1.4.1.161.19.3.1.6
1.3.6.1.4.1.161.19.3.1.7
1.3.6.1.4.1.161.19.3.1.9
1.3.6.1.4.1.161.19.3.1.10
1.3.6.1.4.1.161.19.3.1.11
1.3.6.1.4.1.161.19.3.1.12
1.3.6.1.4.1.161.19.3.1.13
Last updated
2003-04-15 00:00
Organization
Cambium Networks
Namespace
cambium
Source file
WHISP-APS-MIB
Digest
sha256:59baeb893b3d623fcd676b195029f4966d0e89c7f2fdd7012ffa1df34648b42e

Description

This module contains MIB definitions for APs.

Contact

Cambium Networks Support email: support@cambiumnetworks.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION
WHISP-BOX-MIBV2-MIBwhispBoxEsn, whispBoxRFPhysicalRadioEntry
WHISP-GLOBAL-REG-MIBwhispAps, whispBox, whispModules
WHISP-TCV2-MIBEventString, WhispLUID, WhispMACAddress

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WHISP-APS-MIB
WHISP-BOX-MIBV2-MIB
WHISP-GLOBAL-REG-MIB
WHISP-TCV2-MIB

Objects

NameOIDSyntaxAccessStatus
whispApsConfig
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.1
gpsInput
OBJECT-TYPE
The variable is deprecated. See gpsInput in whispBoxConfig.
1.3.6.1.4.1.161.19.3.1.1.1INTEGER {generateSyncSignal(0), syncToReceivedSignalTimingPort(1), syncToReceivedSignalPowerPort(2)}read-writeobsolete
rfFreqCarrier
OBJECT-TYPE
The primary transmit frequency. Also see radioFreqCarrier.
1.3.6.1.4.1.161.19.3.1.1.2INTEGER {wired(0)}read-writedeprecated
apLinkSpeed
OBJECT-TYPE
The variable is deprecated.
1.3.6.1.4.1.161.19.3.1.1.3DisplayStringread-writeobsolete
dwnLnkData
OBJECT-TYPE
This attribute is deprecated. Please see radioDownlinkPercent.
1.3.6.1.4.1.161.19.3.1.1.4INTEGER (1..99)read-writedeprecated
highPriorityUpLnkPct
OBJECT-TYPE
Percentage of uplink slots for high priority data.
1.3.6.1.4.1.161.19.3.1.1.5INTEGER (0..99)read-writeobsolete
numUAckSlots
OBJECT-TYPE
Total number of upstream ack slots.
1.3.6.1.4.1.161.19.3.1.1.6INTEGERread-writeobsolete
uAcksReservHigh
OBJECT-TYPE
Total number of upstream high priority ack slots
1.3.6.1.4.1.161.19.3.1.1.7INTEGERread-writeobsolete
numDAckSlots
OBJECT-TYPE
Total number of downstream ack slots.
1.3.6.1.4.1.161.19.3.1.1.8INTEGERread-writeobsolete
dAcksReservHigh
OBJECT-TYPE
Total number of high priority downstream ack slots.
1.3.6.1.4.1.161.19.3.1.1.9INTEGERread-writeobsolete
numCtlSlots
OBJECT-TYPE
This OID is deprecated, please use numCtlSlotsHW.
1.3.6.1.4.1.161.19.3.1.1.10INTEGERread-writeobsolete
numCtlSlotsReserveHigh
OBJECT-TYPE
Total number of High priority upstream control (contention) slots.
1.3.6.1.4.1.161.19.3.1.1.11INTEGERread-writeobsolete
upLnkDataRate
OBJECT-TYPE
Sustained uplink bandwidth cap.
1.3.6.1.4.1.161.19.3.1.1.12INTEGERread-writecurrent
upLnkLimit
OBJECT-TYPE
Burst uplink bandwidth cap.
1.3.6.1.4.1.161.19.3.1.1.13INTEGERread-writecurrent
dwnLnkDataRate
OBJECT-TYPE
Sustained downlink bandwidth cap.
1.3.6.1.4.1.161.19.3.1.1.14INTEGERread-writecurrent
dwnLnkLimit
OBJECT-TYPE
Burst downlink bandwidth cap.
1.3.6.1.4.1.161.19.3.1.1.15INTEGERread-writecurrent
sectorID
OBJECT-TYPE
Advertise sector number for an AP. Not supported on 450 platform.
1.3.6.1.4.1.161.19.3.1.1.16INTEGER (0..15)read-writecurrent
maxRange
OBJECT-TYPE
This attribute is deprecated. Please see radioMaxRange.
1.3.6.1.4.1.161.19.3.1.1.17INTEGERread-writedeprecated
airLinkSecurity
OBJECT-TYPE
Air Link Security. desEnhancedAndAuthentication(2) and authenticationIfAvailable(3) are only for APAS.
1.3.6.1.4.1.161.19.3.1.1.18INTEGER {standard(0), desEnhanced(1), desEnhancedAndAuthentication(2), authenticationIfAvailable(3)}read-writeobsolete
berMode
OBJECT-TYPE
AP backgroup BER mode.
1.3.6.1.4.1.161.19.3.1.1.19INTEGER {berStream(0), noBerStream(1)}read-writeobsolete
asIP1
OBJECT-TYPE
Obsoleted. Configure with whispApsDNS.authServer1.
1.3.6.1.4.1.161.19.3.1.1.20IpAddressread-writeobsolete
asIP2
OBJECT-TYPE
Obsoleted. Configure with whispApsDNS.authServer2.
1.3.6.1.4.1.161.19.3.1.1.21IpAddressread-writeobsolete
asIP3
OBJECT-TYPE
Obsoleted. Configure with whispApsDNS.authServer3.
1.3.6.1.4.1.161.19.3.1.1.22IpAddressread-writeobsolete
lanIpAp
OBJECT-TYPE
LAN IP.
1.3.6.1.4.1.161.19.3.1.1.23IpAddressread-writecurrent
lanMaskAp
OBJECT-TYPE
LAN subnet mask.
1.3.6.1.4.1.161.19.3.1.1.24IpAddressread-writecurrent
defaultGwAp
OBJECT-TYPE
Default gateway
1.3.6.1.4.1.161.19.3.1.1.25IpAddressread-writecurrent
privateIp
OBJECT-TYPE
Private IP.
1.3.6.1.4.1.161.19.3.1.1.26IpAddressread-writecurrent
gpsTrap
OBJECT-TYPE
Variable to enable/disable GPS sync/out-sync traps.
1.3.6.1.4.1.161.19.3.1.1.27INTEGER {gpsTrapDisabled(0), gpsTrapEnabled(1)}read-writecurrent
regTrap
OBJECT-TYPE
Variable to enable/disable registration complete/lost traps.
1.3.6.1.4.1.161.19.3.1.1.28INTEGER {regTrapDisabled(0), regTrapEnabled(1)}read-writecurrent
txSpreading
OBJECT-TYPE
Variable to enable/disable Transmit Frame Spreading. This option is for FSK only.
1.3.6.1.4.1.161.19.3.1.1.29INTEGER {txSpreadingDisabled(0), txSpreadingEnabled(1)}read-writecurrent
apBeaconInfo
OBJECT-TYPE
Variable to enable/disable displaying AP beacon info through AP eval.
1.3.6.1.4.1.161.19.3.1.1.30INTEGER {enableApBeaconInfo(0), disableApBeaconInfo(1)}read-writecurrent
authMode
OBJECT-TYPE
Variable to enable/disable authentication. The authentication optional mode is for APs only. This variable can only be set when authentication feature is enabled. Setting it to 1 will use a BAM server for authentication of SMs. Setting it to 2 will make use of the Authentication Key on the AP for authenticating SMs. The keys must match on SM and AP in order for the SM to be authenticated in this mode.
1.3.6.1.4.1.161.19.3.1.1.31INTEGER {authenticationDisabled(0), authenticationRequiredBam(1), authenticationRequiredAP(3), authenticationRequiredAAA(4)}read-writecurrent
authKeyAp
OBJECT-TYPE
Authentication key. It should be 32 character long. Can be used on MultiPoint AP if AP Authentication mode is selected. Otherwise, it is used on Backhauls.
1.3.6.1.4.1.161.19.3.1.1.32DisplayStringread-writecurrent
encryptionMode
OBJECT-TYPE
Variable to enable/disable encryption.
1.3.6.1.4.1.161.19.3.1.1.33INTEGER {encryptionDisabled(0), encryptionEnabled(1)}read-writecurrent
ntpServerIp
OBJECT-TYPE
Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3.
1.3.6.1.4.1.161.19.3.1.1.34IpAddressread-writeobsolete
broadcastRetryCount
OBJECT-TYPE
Broadcast Repeat Count : Range 0 -- 2. For APs.
1.3.6.1.4.1.161.19.3.1.1.35INTEGERread-writecurrent
encryptDwBroadcast
OBJECT-TYPE
To enable or disable Encrypted Downlink Broadcast. For FSK APs.
1.3.6.1.4.1.161.19.3.1.1.36INTEGER {disable(0), enable(1)}read-writecurrent
updateAppAddress
OBJECT-TYPE
Update Application Address.
1.3.6.1.4.1.161.19.3.1.1.37IpAddressread-writecurrent
dfsConfig
OBJECT-TYPE
To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios.
1.3.6.1.4.1.161.19.3.1.1.38INTEGER {disable(0), enable(1)}read-writeobsolete
vlanEnable
OBJECT-TYPE
To enable or disable VLAN.
1.3.6.1.4.1.161.19.3.1.1.39INTEGER {disable(0), enable(1)}read-writecurrent
configSource
OBJECT-TYPE
To configure CIR, MIR and VLAN through SM or BAM.
1.3.6.1.4.1.161.19.3.1.1.40INTEGER {bam(0), sm(1), bamsm(2)}read-writecurrent
apRateAdapt
OBJECT-TYPE
To enable or disable double rate.
1.3.6.1.4.1.161.19.3.1.1.41INTEGER {onex(0), onextwox(1), onextwoxthreex(2)}read-writeobsolete
numCtlSlotsHW
OBJECT-TYPE
This attribute is deprecated. Please see radioControlSlots.
1.3.6.1.4.1.161.19.3.1.1.42INTEGERread-writedeprecated
displayAPEval
OBJECT-TYPE
If enable, it allows display of AP Eval Data at the SM.
1.3.6.1.4.1.161.19.3.1.1.43INTEGER {enable(0), disable(1)}read-writecurrent
smIsolation
OBJECT-TYPE
(0) -- Disable SM Isolation. (1) -- Enable SM Isolation by blocking SM destined packets. (2) -- Enable SM Isolation by forwarding SM packets upstream.
1.3.6.1.4.1.161.19.3.1.1.44INTEGER {smIsolationDisable(0), smIsolationDrop(1), smIsolationFwd(2)}read-writecurrent
ipAccessFilterEnable
OBJECT-TYPE
To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 entries.
1.3.6.1.4.1.161.19.3.1.1.45INTEGER {disable(0), enable(1)}read-writecurrent
allowedIPAccess1
OBJECT-TYPE
Allow access to AP Management from this IP. 0 is default setting to allow from all IPs.
1.3.6.1.4.1.161.19.3.1.1.46IpAddressread-writecurrent
allowedIPAccess2
OBJECT-TYPE
Allow access to AP Management from this IP. 0 is default setting to allow from all IPs.
1.3.6.1.4.1.161.19.3.1.1.47IpAddressread-writecurrent
allowedIPAccess3
OBJECT-TYPE
Allow access to AP Management from this IP. 0 is default setting to allow from all IPs.
1.3.6.1.4.1.161.19.3.1.1.48IpAddressread-writecurrent
tslBridging
OBJECT-TYPE
1 = We are performing Translation Bridging 0 = We are not.
1.3.6.1.4.1.161.19.3.1.1.49INTEGER {disable(0), enable(1)}read-writecurrent
untranslatedArp
OBJECT-TYPE
1 = We are sending untranslated ARP response. 0 = We are not.
1.3.6.1.4.1.161.19.3.1.1.50INTEGER {disable(0), enable(1)}read-writecurrent
limitFreqBand900
OBJECT-TYPE
1 = We are limiting the freq band of 900 radios. 0 = We are not.
1.3.6.1.4.1.161.19.3.1.1.51INTEGER {disable(0), enable(1)}read-writecurrent
txPwrLevel
OBJECT-TYPE
Deprecated, use 'transmitterOP' instead.
1.3.6.1.4.1.161.19.3.1.1.52INTEGERread-writeobsolete
rfFreqCaralt1
OBJECT-TYPE
First DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are: 5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525, 5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595, 5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665, 5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only). (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS) 5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805. 5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 0: None.
1.3.6.1.4.1.161.19.3.1.1.53INTEGER {none(0)}read-writecurrent
rfFreqCaralt2
OBJECT-TYPE
Second DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are: 5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525, 5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595, 5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665, 5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only). (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS) 5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805. 5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 0: None.
1.3.6.1.4.1.161.19.3.1.1.54INTEGER {none(0)}read-writecurrent
scheduleWhitening
OBJECT-TYPE
1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only
1.3.6.1.4.1.161.19.3.1.1.55INTEGER {disable(0), enable(1)}read-writecurrent
remoteSpectrumAnalysisDuration
OBJECT-TYPE
Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds.
1.3.6.1.4.1.161.19.3.1.1.56INTEGER (10..1000)read-writecurrent
remoteSpectrumAnalyzerLUID
OBJECT-TYPE
Get will always return 0. Set will start Remote Spectrum Analyzer on specified LUID. *Warning* This will cause the SM to disconnect from the AP! You will lose the session for the specified duration! If general error was returned then the LUID does not have an active session, or the SM does not support Remote Spectrum Analysis.
1.3.6.1.4.1.161.19.3.1.1.57INTEGER (2..239)read-writecurrent
bhReReg
OBJECT-TYPE
Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh.
1.3.6.1.4.1.161.19.3.1.1.58INTEGER {disabled(0), enabled(1)}read-writecurrent
dlnkBcastCIR
OBJECT-TYPE
Downlink Broadcast CIR (kbps)
1.3.6.1.4.1.161.19.3.1.1.59INTEGERread-writecurrent
verifyGPSChecksum
OBJECT-TYPE
Enable/Disable verification of GPS message checksums.
1.3.6.1.4.1.161.19.3.1.1.60INTEGER {doNotVerifyGPSMessageChecksum(0), verifyGPSMessageChecksum(1)}read-writecurrent
apVlanOverride
OBJECT-TYPE
Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for running spectrum analysis on the AP. Since doing that requires the AP to be turned into an SM, enabling this option will allow you to keep the AP's VLAN configuration in place while the AP is running as an SM.
1.3.6.1.4.1.161.19.3.1.1.61INTEGER {disable(0), enable(1)}read-writecurrent
dhcpRelayAgentEnable
OBJECT-TYPE
Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it. (0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally (1) - Relay Agent enabled - AP will intercept DHCP DISCOVER message from SM and CPE, insert Option 82 containing SM's MAC address, and forward request to specified DHCP server.
1.3.6.1.4.1.161.19.3.1.1.62INTEGER {disable(0), fullRelay(1), option82Only(2)}read-writecurrent
dhcpRelayAgentSrvrIP
OBJECT-TYPE
Obsoleted. Configure with whispApsDNS.dhcprServer.
1.3.6.1.4.1.161.19.3.1.1.63IpAddressread-writeobsolete
colorCodeRescanTimer
OBJECT-TYPE
Time in minutes for the subscriber to begin the idle timer. This timer will begin as soon as a session is started. This only fires if the device is in session with a non-primary color code. A value of zero (0) disables this timer (MultiPoint system Only)
1.3.6.1.4.1.161.19.3.1.1.64INTEGER (0..43200)read-writecurrent
colorCodeRescanIdleTimer
OBJECT-TYPE
Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle), then the subscriber will begin to rescan. This timer will wait until the timer set in colorCodeRescanTimer has expired before beginning. This timer only fires if the device is in session with a non-primary color code. A value of zero (0) mean to rescan without waiting for idle. (MultiPoint system Only)
1.3.6.1.4.1.161.19.3.1.1.65INTEGER (0..60)read-writecurrent
authKeyOptionAP
OBJECT-TYPE
This option is for Multipoint APs only. This option will only be used if Authentication Mode is set to AP Pre-Shared Key. 0 - Use default key. 1 - Use set key.
1.3.6.1.4.1.161.19.3.1.1.66INTEGER {useDefault(0), useKeySet(1)}read-writecurrent
asIP4
OBJECT-TYPE
Obsoleted. Configure with whispApsDNS.authServer4.
1.3.6.1.4.1.161.19.3.1.1.67IpAddressread-writeobsolete
asIP5
OBJECT-TYPE
Obsoleted. Configure with whispApsDNS.authServer5.
1.3.6.1.4.1.161.19.3.1.1.68IpAddressread-writeobsolete
onlyAllowVer95OrAbove
OBJECT-TYPE
Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be allowed to register.
1.3.6.1.4.1.161.19.3.1.1.69INTEGER {onlyAllowVer95OrAboveDisabled(0), onlyAllowVer95OrAboveEnabled(1)}read-writecurrent
apRxDelay
OBJECT-TYPE
This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB.
1.3.6.1.4.1.161.19.3.1.1.70INTEGERread-writecurrent
qinqEthType
OBJECT-TYPE
EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default.
1.3.6.1.4.1.161.19.3.1.1.71INTEGER {x88a8(0), x8100(1), x9100(2), x9200(3), x9300(4)}read-writecurrent
sMTxPowerControl
OBJECT-TYPE
Enable/Disable AP control of SM TX power. Engineering use only.
1.3.6.1.4.1.161.19.3.1.1.72INTEGER {disable(0), enable(1)}read-writecurrent
fskSMRcvTargetLvl
OBJECT-TYPE
Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). FSK only.
1.3.6.1.4.1.161.19.3.1.1.73INTEGER (-80..-40)read-writeobsolete
authSharedSecret1
OBJECT-TYPE
Authentication Server 1 Shared Secret.
1.3.6.1.4.1.161.19.3.1.1.74DisplayStringread-writecurrent
authSharedSecret2
OBJECT-TYPE
Authentication Server 2 Shared Secret.
1.3.6.1.4.1.161.19.3.1.1.75DisplayStringread-writecurrent
authSharedSecret3
OBJECT-TYPE
Authentication Server 3 Shared Secret.
1.3.6.1.4.1.161.19.3.1.1.76DisplayStringread-writecurrent
whispUsrAuthSharedSecret1
OBJECT-TYPE
Obsoleted. Use whispApsConfig.authSharedSecret1.
1.3.6.1.4.1.161.19.3.1.1.79DisplayStringread-writeobsolete
whispUsrAuthSharedSecret2
OBJECT-TYPE
Obsoleted. Use whispApsConfig.authSharedSecret2.
1.3.6.1.4.1.161.19.3.1.1.80DisplayStringread-writeobsolete
whispUsrAuthSharedSecret3
OBJECT-TYPE
Obsoleted. Use whispApsConfig.authSharedSecret3.
1.3.6.1.4.1.161.19.3.1.1.81DisplayStringread-writeobsolete
whispUsrAcctSvr1
OBJECT-TYPE
Obsoleted. Use whispApsDNS.authServer1.
1.3.6.1.4.1.161.19.3.1.1.82DisplayStringread-writeobsolete
whispUsrAcctSvr2
OBJECT-TYPE
Obsoleted. Use whispApsDNS.authServer2.
1.3.6.1.4.1.161.19.3.1.1.83DisplayStringread-writeobsolete
whispUsrAcctSvr3
OBJECT-TYPE
Obsoleted. Use whispApsDNS.authServer3.
1.3.6.1.4.1.161.19.3.1.1.84DisplayStringread-writeobsolete
whispUsrAuthPhase1
OBJECT-TYPE
Select method for User Authentication. This is deprecated. Please use whispUsrAuth.
1.3.6.1.4.1.161.19.3.1.1.85INTEGER {md5(0)}read-writedeprecated
whispWebUseAuthServer
OBJECT-TYPE
Obsoleted. Use whispApsDNS.authServer[1-3].
1.3.6.1.4.1.161.19.3.1.1.86INTEGER {useRADIUSAccountingSvr(0), useRADIUSAuthenticationSvr(1)}read-writeobsolete
dropSession
OBJECT-TYPE
SM/BHS MAC Address to drop session from the AP/BHM.
1.3.6.1.4.1.161.19.3.1.1.87MacAddressread-writecurrent
uGPSPower
OBJECT-TYPE
Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set).
1.3.6.1.4.1.161.19.3.1.1.88INTEGER {off(0), on(1)}read-writecurrent
timeZone
OBJECT-TYPE
Set the timezone offset for the radio. This change takes affect dynamically. The available timezones are: 0 : (UTC) UTC - Coordinated Universal Time 1 : (UTC) GMT - Greenwich Mean Time 2 : (UTC) WET - Western European Time 3 : (UTC-12) BIT - Baker Island Time 4 : (UTC-11) SST - Samoa Standard Time 5 : (UTC-10) CKT - Cook Island Time 6 : (UTC-10) HAST - Hawaii-Aleutian Standard Time 7 : (UTC-10) HST - Hawaii Standard Time 8 : (UTC-10) TAHT - Tahiti Time 9 : (UTC-09:30) MIT - Marquesas Islands Time 10 : (UTC-09) AKST - Alaska Standard Time 11 : (UTC-09) GIT - Gambier Island Time 12 : (UTC-09) HADT - Hawaii-Aleutian Daylight Time 13 : (UTC-08) AKDT - Alaska Daylight Time 14 : (UTC-08) CIST - Clipperton Island Standard Time 15 : (UTC-08) PST - Pacific Standard Time (North America) 16 : (UTC-07) MST - Mountain Standard Time (North America) 17 : (UTC-07) PDT - Pacific Daylight Time (North America) 18 : (UTC-06) CST - Central Standard Time (North America) 19 : (UTC-06) EAST - Easter Island Standard Time 20 : (UTC-06) GALT - Galapagos Time 21 : (UTC-06) MDT - Mountain Daylight Time (North America) 22 : (UTC-05) CDT - Central Daylight Time (North America) 23 : (UTC-05) COT - Colombia Time 24 : (UTC-05) ECT - Ecuador Time 25 : (UTC-05) EST - Eastern Standard Time (North America) 26 : (UTC-04:30) VET - Venezuelan Standard Time 27 : (UTC-04) AST - Atlantic Standard Time 28 : (UTC-04) BOT - Bolivia Time 29 : (UTC-04) CLT - Chile Standard Time 30 : (UTC-04) COST - Colombia Summer Time 31 : (UTC-04) ECT - Eastern Caribbean Time (does not recognise DST) 32 : (UTC-04) EDT - Eastern Daylight Time (North America) 33 : (UTC-04) FKT - Falkland Islands Time 34 : (UTC-04) GYT - Guyana Time 35 : (UTC-03:30) NST - Newfoundland Standard Time 36 : (UTC-03:30) NT - Newfoundland Time 37 : (UTC-03) ADT - Atlantic Daylight Time 38 : (UTC-03) ART - Argentina Time 39 : (UTC-03) BRT - Brasilia Time 40 : (UTC-03) CLST - Chile Summer Time 41 : (UTC-03) FKST - Falkland Islands Summer Time 42 : (UTC-03) GFT - French Guiana Time 43 : (UTC-03) UYT - Uruguay Standard Time 44 : (UTC-02:30) NDT - Newfoundland Daylight Time 45 : (UTC-02) GST - South Georgia and the South Sandwich Islands 46 : (UTC-02) UYST - Uruguay Summer Time 47 : (UTC-01) AZOST - Azores Standard Time 48 : (UTC-01) CVT - Cape Verde Time 49 : (UTC+01) BST - British Summer Time (British Standard Time from Feb 1968 to Oct 1971) 50 : (UTC+01) CET - Central European Time 51 : (UTC+01) DFT - AIX specific equivalent of Central European Time 52 : (UTC+01) IST - Irish Summer Time 53 : (UTC+01) WAT - West Africa Time 54 : (UTC+01) WEDT - Western European Daylight Time 55 : (UTC+01) WEST - Western European Summer Time 56 : (UTC+02) CAT - Central Africa Time 57 : (UTC+02) CEDT - Central European Daylight Time 58 : (UTC+02) CEST - Central European Summer Time 59 : (UTC+02) EET - Eastern European Time 60 : (UTC+02) IST - Israel Standard Time 61 : (UTC+02) SAST - South African Standard Time 62 : (UTC+03) AST - Arab Standard Time (Kuwait, Riyadh) 63 : (UTC+03) AST - Arabic Standard Time (Baghdad) 64 : (UTC+03) EAT - East Africa Time 65 : (UTC+03) EEDT - Eastern European Daylight Time 66 : (UTC+03) EEST - Eastern European Summer Time 67 : (UTC+03) MSK - Moscow Standard Time 68 : (UTC+03:30) IRST - Iran Standard Time 69 : (UTC+04) AMT - Armenia Time 70 : (UTC+04) AST - Arabian Standard Time (Abu Dhabi, Muscat) 71 : (UTC+04) AZT - Azerbaijan Time 72 : (UTC+04) GET - Georgia Standard Time 73 : (UTC+04) MSD - Moscow Summer Time 74 : (UTC+04) MUT - Mauritius Time 75 : (UTC+04) RET - Reunion Time 76 : (UTC+04) SAMT - Samara Time 77 : (UTC+04) SCT - Seychelles Time 78 : (UTC+04:30) AFT - Afghanistan Time 79 : (UTC+05) AMST - Armenia Summer Time 80 : (UTC+05) HMT - Heard and McDonald Islands Time 81 : (UTC+05) PKT - Pakistan Standard Time 82 : (UTC+05) YEKT - Yekaterinburg Time 83 : (UTC+05:30) IST - Indian Standard Time 84 : (UTC+05:30) SLT - Sri Lanka Time 85 : (UTC+05:45) NPT - Nepal Time 86 : (UTC+06) BIOT - British Indian Ocean Time 87 : (UTC+06) BST - Bangladesh Standard Time 88 : (UTC+06) BTT - Bhutan Time 89 : (UTC+06) OMST - Omsk Time 90 : (UTC+06:30) CCT - Cocos Islands Time 91 : (UTC+06:30) MST - Myanmar Standard Time 92 : (UTC+07) CXT - Christmas Island Time 93 : (UTC+07) ICT - Indochina Time 94 : (UTC+07) KRAT - Krasnoyarsk Time 95 : (UTC+07) THA - Thailand Standard Time 96 : (UTC+08) ACT - ASEAN Common Time 97 : (UTC+08) AWST - Australian Western Standard Time 98 : (UTC+08) BDT - Brunei Time 99 : (UTC+08) CST - China Standard Time 100 : (UTC+08) HKT - Hong Kong Time 101 : (UTC+08) IRKT - Irkutsk Time 102 : (UTC+08) MST - Malaysian Standard Time 103 : (UTC+08) PST - Philippine Standard Time 104 : (UTC+08) SST - Singapore Standard Time 105 : (UTC+09) AWDT - Australian Western Daylight Time 106 : (UTC+09) JST - Japan Standard Time 107 : (UTC+09) KST - Korea Standard Time 108 : (UTC+09) YAKT - Yakutsk Time 109 : (UTC+09:30) ACST - Australian Central Standard Time 110 : (UTC+10) AEST - Australian Eastern Standard Time 111 : (UTC+10) ChST - Chamorro Standard Time 112 : (UTC+10) VLAT - Vladivostok Time 113 : (UTC+10:30) ACDT - Australian Central Daylight Time 114 : (UTC+10:30) LHST - Lord Howe Standard Time 115 : (UTC+11) AEDT - Australian Eastern Daylight Time 116 : (UTC+11) MAGT - Magadan Time 117 : (UTC+11) SBT - Solomon Islands Time 118 : (UTC+11:30) NFT - Norfolk Time[1] 119 : (UTC+12) FJT - Fiji Time 120 : (UTC+12) GILT - Gilbert Island Time 121 : (UTC+12) PETT - Kamchatka Time 122 : (UTC+12:45) CHAST - Chatham Standard Time 123 : (UTC+13) PHOT - Phoenix Island Time 124 : (UTC+14) LINT - Line Islands Time
1.3.6.1.4.1.161.19.3.1.1.89INTEGER (0..124)read-writecurrent
ofdmSMRcvTargetLvl
OBJECT-TYPE
Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value.
1.3.6.1.4.1.161.19.3.1.1.90INTEGER (-80..-40)read-writecurrent
radiusPort
OBJECT-TYPE
Port used to connect to the RADIUS server. Default is 1812.
1.3.6.1.4.1.161.19.3.1.1.91INTEGERread-writecurrent
radiusAcctPort
OBJECT-TYPE
Port used to for RADIUS Accounting. Default is 1813.
1.3.6.1.4.1.161.19.3.1.1.92INTEGERread-writecurrent
lastSesStatsReset
OBJECT-TYPE
Displays the timestamp of last reset of session stats or None otherwise.
1.3.6.1.4.1.161.19.3.1.1.93DisplayStringread-onlycurrent
resetSesStats
OBJECT-TYPE
Resets the session stats if true.
1.3.6.1.4.1.161.19.3.1.1.94INTEGER {noReset(0), reset(1)}read-writecurrent
rfOLTrap
OBJECT-TYPE
Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level.
1.3.6.1.4.1.161.19.3.1.1.95INTEGER {disable(0), enable(1)}read-writecurrent
rfOLThreshold
OBJECT-TYPE
Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager.
1.3.6.1.4.1.161.19.3.1.1.96INTEGER (1..100)read-writecurrent
rfOLEnable
OBJECT-TYPE
Enable/Disable Throughput RF Overload Monitoring monitoring.
1.3.6.1.4.1.161.19.3.1.1.97INTEGER {disable(0), enable(1)}read-writecurrent
actionListFilename
OBJECT-TYPE
Name of the file that contains the Action List for Auto update commands from CNUT
1.3.6.1.4.1.161.19.3.1.1.98DisplayStringread-writecurrent
enableAutoupdate
OBJECT-TYPE
Enables/Disables auto-update of the SM's under an AP
1.3.6.1.4.1.161.19.3.1.1.99INTEGER {disable(0), enable(1)}read-writecurrent
accountingSmReAuthInterval
OBJECT-TYPE
Select Interval for Reauthentication of SM
1.3.6.1.4.1.161.19.3.1.1.100INTEGERread-writecurrent
syslogDomainNameAppend
OBJECT-TYPE
This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup
1.3.6.1.4.1.161.19.3.1.1.101INTEGER {disableDomain(0), appendDomain(1)}read-writedeprecated
syslogServerAddr
OBJECT-TYPE
This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup
1.3.6.1.4.1.161.19.3.1.1.102DisplayStringread-writedeprecated
syslogServerPort
OBJECT-TYPE
This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup
1.3.6.1.4.1.161.19.3.1.1.103INTEGERread-writecurrent
syslogXmitAP
OBJECT-TYPE
Enables/Disables transmission of Syslogs from AP/BHM
1.3.6.1.4.1.161.19.3.1.1.104INTEGER {disable(0), enable(1)}read-writecurrent
syslogXmitSMs
OBJECT-TYPE
Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS.
1.3.6.1.4.1.161.19.3.1.1.105INTEGER {disable(0), enable(1)}read-writecurrent
accountingInterimUpdateInterval
OBJECT-TYPE
Select Interval for Interim Updates
1.3.6.1.4.1.161.19.3.1.1.106INTEGERread-writecurrent
gpsOutputEn
OBJECT-TYPE
Enable or Disable GPS sync output enable.
1.3.6.1.4.1.161.19.3.1.1.107INTEGER {off(0), on(1)}read-writecurrent
removeIdleSMs
OBJECT-TYPE
Setting this to a value 1 will remove all SMs which are in Idle state from AP's Session list.
1.3.6.1.4.1.161.19.3.1.1.108INTEGER {stopped(0), start(1)}read-writecurrent
lastTimeIdleSMsRemoved
OBJECT-TYPE
Displays the timestamp of last removal of Idle SMs from AP's Session list
1.3.6.1.4.1.161.19.3.1.1.109DisplayStringread-onlycurrent
userAuthSharedSecret1
OBJECT-TYPE
User Authentication Server 1 Shared Secret.
1.3.6.1.4.1.161.19.3.1.1.110DisplayStringread-writecurrent
userAuthSharedSecret2
OBJECT-TYPE
User Authentication Server 2 Shared Secret.
1.3.6.1.4.1.161.19.3.1.1.111DisplayStringread-writecurrent
userAuthSharedSecret3
OBJECT-TYPE
User Authentication Server 3 Shared Secret.
1.3.6.1.4.1.161.19.3.1.1.112DisplayStringread-writecurrent
trapDelayAfterBootup
OBJECT-TYPE
Delays sending of SNMP traps after radio boots up for this many number of seconds.
1.3.6.1.4.1.161.19.3.1.1.113INTEGER (0..120)read-writecurrent
radioMode
OBJECT-TYPE
This OID is obsolete.
1.3.6.1.4.1.161.19.3.1.1.206INTEGER {mimoOnly(2)}read-writeobsolete
rfTelnetAccess
OBJECT-TYPE
Allows/prohibits uplink Telnet access (SM->AP).
1.3.6.1.4.1.161.19.3.1.1.207INTEGER {disable(0), enable(1)}read-writecurrent
upLnkMaxBurstDataRate
OBJECT-TYPE
Maximum burst uplink rate.
1.3.6.1.4.1.161.19.3.1.1.208INTEGERread-writecurrent
dwnLnkMaxBurstDataRate
OBJECT-TYPE
Maximum burst downlink rate.
1.3.6.1.4.1.161.19.3.1.1.209INTEGERread-writecurrent
rfPPPoEPADIForwarding
OBJECT-TYPE
Enables/disables forwarding of PPPoE PADI packets from AP to SM.
1.3.6.1.4.1.161.19.3.1.1.210INTEGER {disable(0), enable(1)}read-writecurrent
allowedIPAccessNMLength1
OBJECT-TYPE
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
1.3.6.1.4.1.161.19.3.1.1.211INTEGER (1..32)read-writecurrent
allowedIPAccessNMLength2
OBJECT-TYPE
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
1.3.6.1.4.1.161.19.3.1.1.212INTEGER (1..32)read-writecurrent
allowedIPAccessNMLength3
OBJECT-TYPE
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
1.3.6.1.4.1.161.19.3.1.1.213INTEGER (1..32)read-writecurrent
bridgeFloodUnknownsEnable
OBJECT-TYPE
Forward unicast packets with an unknown address to all SMs. This can significantly reduce downlink throughput. (0) - Drop unknown unicast packets. (1) - Forward unknown unicast packets to all SMs.
1.3.6.1.4.1.161.19.3.1.1.214INTEGER {disable(0), enable(1)}read-writecurrent
berModSelect
OBJECT-TYPE
The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM.
1.3.6.1.4.1.161.19.3.1.1.215INTEGER {qpsk(0), qam-16(1), qam-64(2), qam-256(3)}read-writecurrent
remoteSpectrumAnalyzerScanBandwidth
OBJECT-TYPE
Scanning Bandwidth used for the Remote Spectrum Analyzer. Only available on PMP 450.
1.3.6.1.4.1.161.19.3.1.1.216INTEGER {bandwidth5MHz(0), bandwidth10MHz(1), bandwidth20MHz(2), bandwidth15MHz(3), bandwidth30MHz(4)}read-writecurrent
multicastVCDataRate
OBJECT-TYPE
Enables and selects the data rate of the Multicast VC. If disabled, multicast messages are sent using the broadcast VC. This VC does not automatically rate adapt. Note: SMs that cannot receive at the selected rate will receive no multicast messages.
1.3.6.1.4.1.161.19.3.1.1.217INTEGER {disable(0), rate1XmimoA(4), rate2XmimoB(5), rate4XmimoB(7), rate6XmimoB(8), rate8XmimoB(9), rate2XmimoA(10), rate4XmimoA(11), rate6XmimoA(12)}read-writecurrent
dlnkMcastCIR
OBJECT-TYPE
Downlink Multicast CIR (kbps)
1.3.6.1.4.1.161.19.3.1.1.218INTEGERread-writecurrent
multicastRetryCount
OBJECT-TYPE
Multicast Repeat Count : Range 0 - 2. For APs.
1.3.6.1.4.1.161.19.3.1.1.219INTEGERread-writecurrent
apConfigAdjacentChanSupport
OBJECT-TYPE
Used to enable or disable adjacent channel support. This could be needed when there is no guard band between co-located APs. Only available for APs in 3 GHz, 4.9 GHz and all 5 GHz frequency bands. For 3 GHz, this caps SMs to max transmit power of 23 dBm. When disabled, allows 3 GHz SMs to max out transmit power at 25 dBm. For 4.9-5.9 GHz, this caps 450b SMs to max transmit power of 25 dBm. When disabled, allows 4.9-5.9 GHz 450b SMs to max out transmit power at 27 dBm.
1.3.6.1.4.1.161.19.3.1.1.220INTEGER {disable(0), enable(1)}read-writecurrent
pmp430InteropMode
OBJECT-TYPE
When the AP talks to a PMP 430 it can do so in either MIMO-A or SISO mode. 0 = MIMO-A 1 = SISO Only applies to PMP 450 AP at 5 GHz. By default in 13.2 the AP talks in MIMO-A to PMP 430 SISO SMs. Setting this to a 1 will enable SISO mode to PMP 430 SISO SMs, as it was in 13.1.3 and before.
1.3.6.1.4.1.161.19.3.1.1.221INTEGER {mimoa(0), siso(1)}read-writecurrent
framePeriod
OBJECT-TYPE
Changes frame period to 2.5 ms or 5ms. Note: If set to 5 ms, only SM/BHS from 13.3 and onward will be able to register. Only on PMP and PTP 450. Not available in all regions.
1.3.6.1.4.1.161.19.3.1.1.223INTEGER {twoPointFiveMs(0), fiveMs(1)}read-writecurrent
enableRadiusDynAuth
OBJECT-TYPE
This option can be used to enable Radius Dynamic Authorization Extensions.Both CoA, which change the SM config parameters from the Radius server while an SM is already in session and Disconnect Message are supported. This option will only be used if Authentication mode is set to Radius AAA. 0 - Disable Radius Dynamic Authorization Extension. 1 - Enable Radius Dynamic Authorization Extension.
1.3.6.1.4.1.161.19.3.1.1.224INTEGER {disableDynAuth(0), enableDynAuth(1)}read-writecurrent
pmp430SMRegistration
OBJECT-TYPE
Option to allow/disallow PMP 430 SMs to register to this AP. When disabled PMP 430 SMs registrations will be rejected.
1.3.6.1.4.1.161.19.3.1.1.225INTEGER {deny(0), allow(1)}read-writecurrent
disableAuthForICCSM
OBJECT-TYPE
Bypass Authentication for ICC SMs
1.3.6.1.4.1.161.19.3.1.1.226INTEGER {disabled(0), enabled(1)}read-writecurrent
onlyAllowPMP450iSMRegistration
OBJECT-TYPE
Option to limit SM registration to only allow PMP 450i devices or allow all devices (450i/450/430) to register. PMP 430 SM registration can be further limited by the pmp430SMRegistration OID if desired. Setting this to only450i will force an Auth Fail registration failure when a PMP 450 or PMP 430 SM device tries to register. This option only applies to PMP 450i AP devices.
1.3.6.1.4.1.161.19.3.1.1.228INTEGER {only450i(0), all(1)}read-writecurrent
pmp450430LegacyMode
OBJECT-TYPE
Option to put the PMP 450b/450i/450m into a Legacy mode for communicating with PMP 450 SMs running SW older than 13.3 and PMP 430 SMs running SW older than 13.4.1. Enabling this option will have an impact on sector throughput performance so should only be enabled to allow upgrading of the mixed sector. 450m will operate in SU-MIMO Mode.
1.3.6.1.4.1.161.19.3.1.1.229INTEGER {disabled(0), enabled(1)}read-writecurrent
pagerRejectFilterSelect
OBJECT-TYPE
Enable or disable the Pager filter which can filter out Pager signals interfering in the 900 MHz band. NOTE: Frequencies 920 MHz and above will not work when enabled. Only applicable to 900 MHz devices.
1.3.6.1.4.1.161.19.3.1.1.230INTEGER {disable(0), enable(1)}read-writecurrent
freeRunGPSSyncBypass
OBJECT-TYPE
Enable to allow Free Run to begin immediately after radio bootup. Normally, Free Run is only allowed after GPS sync has been established at least once, then lost.
1.3.6.1.4.1.161.19.3.1.1.231INTEGER {disabled(0), enabled(1)}read-writecurrent
useAPManagementVIDForICCSM
OBJECT-TYPE
When enabled, SM connected via ICC uses APs MVID instead of its own.
1.3.6.1.4.1.161.19.3.1.1.232INTEGER {disable(0), enable(1)}read-writecurrent
frameAlignmentLegacyMode
OBJECT-TYPE
Option to adjust the frame alignment for compatibility with different GPS sync sources and software versions. Please see user guide for more information. Not applicable to 3 GHz radios running with 5ms frame, nor PMP 450m.
1.3.6.1.4.1.161.19.3.1.1.233INTEGER {off(0), mode1(1), mode2(2)}read-writecurrent
noRebootFreqChange
OBJECT-TYPE
Enable/Disable option to change frequency without rebooting. Engineering use only.
1.3.6.1.4.1.161.19.3.1.1.234INTEGER {default(0), noreboot(1)}read-writecurrent
mumimoTrialMode
OBJECT-TYPE
Enable MU-MIMO, Trial Mode units will decrement until units are exhausted or Trial Mode is disabled. Disable MU-MIMO, radio is still functional with SU-MIMO operation. Trial Mode units will not decrement. 450m only.
1.3.6.1.4.1.161.19.3.1.1.236INTEGER {disable(0), enable(1)}read-writecurrent
prioritizeMgmtData
OBJECT-TYPE
0 - Management data will use low priority VC. 1 - If high priority VC is configured will use that, otherwise will use low priority VC
1.3.6.1.4.1.161.19.3.1.1.247INTEGER {low(0), high(1)}read-writecurrent
whispApsLinkTestConfig
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.2.1
linkTestLUID
OBJECT-TYPE
LUID selection for Link Test. Valid range: 2-255. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.1INTEGERread-writedeprecated
linkTestDuration
OBJECT-TYPE
Duration for the Link Test. Valid range: 2-10 seconds. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.2INTEGERread-writedeprecated
linkTestAction
OBJECT-TYPE
Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicates the idle state meaning no test is running or the current test is done. That's why the word stopped is used and not the action verb stop. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.3INTEGER {stopped(0), start(1)}read-writedeprecated
linkTestPktLength
OBJECT-TYPE
Packet length for Link Test. Valid range: 64-1714 bytes. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.4INTEGERread-writedeprecated
linkTestMode
OBJECT-TYPE
Link Test Mode 0 = Link Test without Bridging 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput) This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. Extrapolated Link Test is not available for FSK radios. 4 = Link Test with Multiple VCs (traffic sent to all registered VCs, or specified VCs) - 450m only [This Variable is deprecated. Please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.5INTEGER {linktestwithoutbridging(0), linktestwithbridging(1), linktestwithbridgingandmir(2), extrapolatedlinktest(3), linktestwithmultipleVCs(4)}read-writedeprecated
linkTestSNRCalculation
OBJECT-TYPE
Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will slightly degrade packet per second capabilities. Only applicable to GenII OFDM products and up. [This Variable is deprecated. Please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.6INTEGER {disable(0), enable(1)}read-writedeprecated
linkTestWithDualPath
OBJECT-TYPE
Link Test with: 0 = Low Priority VC only 1 = High and Low Priority VCs [This variable is deprecated. Please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.7INTEGER {lowpriorityvconly(0), highandlowpriorityvcs(1)}read-writedeprecated
linkTestNumPkt
OBJECT-TYPE
Number of packets to send. Valid range: 0-64 where 0 will flood the link for the duration of the test. [This variable is deprecated. Please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.8INTEGERread-writedeprecated
linkTestForceModulation
OBJECT-TYPE
Engineering use only. Link Test with: 0 = Normal Rate Adapt algorithm 1 = Force to max modultion - No Rate Adapt Algorithm [This variable is deprecated. Please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.9INTEGER {normalRateAdapt(0), forceMaxModulation(1)}read-writedeprecated
linkTestDirection
OBJECT-TYPE
Link Test Direction - Engineering Use Only 0 = default (will do bidirectional) 1 = Uplink Only 2 = Downlink Only 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0) [This variable is deprecated. Please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.1.10INTEGER {bidirectional(0), uplinkonly(1), downlinkonly(2)}read-writedeprecated
whispApsLinkTestResult
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.2.2
testLUID
OBJECT-TYPE
LUID number of selected unit. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.1INTEGERread-onlydeprecated
linkTestStatus
OBJECT-TYPE
Status for Link Test.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.2DisplayStringread-onlydeprecated
linkTestError
OBJECT-TYPE
Error status of Link Test: (1) Failed to recieve handshake from remote device (2) No session is currently active. Please try again after session established. (3) Received a bad transaction ID. Please try again. (4) We werent able to send the test request to the remote device. (5) We didnt receive any results from the remote device. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.3DisplayStringread-onlydeprecated
testDuration
OBJECT-TYPE
Duration of link test.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.4INTEGERread-onlydeprecated
downLinkRate
OBJECT-TYPE
Downlink Rate.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.5INTEGERread-onlydeprecated
upLinkRate
OBJECT-TYPE
Uplink Rate.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.6INTEGERread-onlydeprecated
downLinkEff
OBJECT-TYPE
Down Link Efficiency.
1.3.6.1.4.1.161.19.3.1.2.2.7INTEGERread-onlydeprecated
maxDwnLinkIndex
OBJECT-TYPE
For link test results, the maximum possible downlink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.8INTEGERread-onlydeprecated
actDwnLinkIndex
OBJECT-TYPE
Actual down link index.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.9INTEGERread-onlydeprecated
expDwnFragCount
OBJECT-TYPE
Expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.10Gauge32read-onlydeprecated
actDwnFragCount
OBJECT-TYPE
Actual Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.11Gauge32read-onlydeprecated
upLinkEff
OBJECT-TYPE
Up link efficiency.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.12INTEGERread-onlydeprecated
expUpFragCount
OBJECT-TYPE
Uplink expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.13Gauge32read-onlydeprecated
actUpFragCount
OBJECT-TYPE
Actual uplink Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.14Gauge32read-onlydeprecated
maxUpLinkIndex
OBJECT-TYPE
For link test results, the maximum possible uplink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.15INTEGERread-onlydeprecated
actUpLinkIndex
OBJECT-TYPE
Actual Up link index.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.16INTEGERread-onlydeprecated
fragments1xDwnLinkVertical
OBJECT-TYPE
Number of fragments received on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.17INTEGERread-onlydeprecated
fragments2xDwnLinkVertical
OBJECT-TYPE
Number of fragments received on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.18INTEGERread-onlydeprecated
fragments3xDwnLinkVertical
OBJECT-TYPE
Number of fragments received on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.19INTEGERread-onlydeprecated
fragments4xDwnLinkVertical
OBJECT-TYPE
Number of fragments received on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.20INTEGERread-onlydeprecated
fragments1xUpLinkVertical
OBJECT-TYPE
Number of fragments received on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.21INTEGERread-onlydeprecated
fragments2xUpLinkVertical
OBJECT-TYPE
Number of fragments received on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.22INTEGERread-onlydeprecated
fragments3xUpLinkVertical
OBJECT-TYPE
Number of fragments received on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.23INTEGERread-onlydeprecated
fragments4xUpLinkVertical
OBJECT-TYPE
Number of fragments received on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.24INTEGERread-onlydeprecated
bitErrorsCorrected1xDwnLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.25DisplayStringread-onlydeprecated
bitErrorsCorrected2xDwnLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.26DisplayStringread-onlydeprecated
bitErrorsCorrected3xDwnLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.27DisplayStringread-onlydeprecated
bitErrorsCorrected4xDwnLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.28DisplayStringread-onlydeprecated
bitErrorsCorrected1xUpLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.29DisplayStringread-onlydeprecated
bitErrorsCorrected2xUpLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.30DisplayStringread-onlydeprecated
bitErrorsCorrected3xUpLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.31DisplayStringread-onlydeprecated
bitErrorsCorrected4xUpLinkVertical
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.32DisplayStringread-onlydeprecated
signalToNoiseRatioDownLinkVertical
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the down link. For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.33INTEGERread-onlydeprecated
signalToNoiseRatioUpLinkVertical
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.34INTEGERread-onlydeprecated
fragments1xDwnLinkHorizontal
OBJECT-TYPE
Number of fragments received on down link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.35INTEGERread-onlydeprecated
fragments2xDwnLinkHorizontal
OBJECT-TYPE
Number of fragments received on down link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.36INTEGERread-onlydeprecated
fragments3xDwnLinkHorizontal
OBJECT-TYPE
Number of fragments received on down link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.37INTEGERread-onlydeprecated
fragments4xDwnLinkHorizontal
OBJECT-TYPE
Number of fragments received on down link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.38INTEGERread-onlydeprecated
fragments1xUpLinkHorizontal
OBJECT-TYPE
Number of fragments received on up link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.39INTEGERread-onlydeprecated
fragments2xUpLinkHorizontal
OBJECT-TYPE
Number of fragments received on up link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.40INTEGERread-onlydeprecated
fragments3xUpLinkHorizontal
OBJECT-TYPE
Number of fragments received on up link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.41INTEGERread-onlydeprecated
fragments4xUpLinkHorizontal
OBJECT-TYPE
Number of fragments received on up link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.42INTEGERread-onlydeprecated
bitErrorsCorrected1xDwnLinkHorizontal
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.43DisplayStringread-onlydeprecated
bitErrorsCorrected2xDwnLinkHorizontal
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.44DisplayStringread-onlydeprecated
bitErrorsCorrected3xDwnLinkHorizontal
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.45DisplayStringread-onlydeprecated
bitErrorsCorrected4xDwnLinkHorizontal
OBJECT-TYPE
Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.46DisplayStringread-onlydeprecated
bitErrorsCorrected1xUpLinkHorizontal
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.47DisplayStringread-onlydeprecated
bitErrorsCorrected2xUpLinkHorizontal
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.48DisplayStringread-onlydeprecated
bitErrorsCorrected3xUpLinkHorizontal
OBJECT-TYPE
Engineering use only. Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.49DisplayStringread-onlydeprecated
bitErrorsCorrected4xUpLinkHorizontal
OBJECT-TYPE
Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.50DisplayStringread-onlydeprecated
signalToNoiseRatioDownLinkHorizontal
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the down link. For MIMO and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.51INTEGERread-onlydeprecated
signalToNoiseRatioUpLinkHorizontal
OBJECT-TYPE
Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.52INTEGERread-onlydeprecated
downLinkRateExtrapolated
OBJECT-TYPE
Extrapolated Downlink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.53INTEGERread-onlydeprecated
upLinkRateExtrapolated
OBJECT-TYPE
Extrapolated Uplink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. [This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.2.54INTEGERread-onlydeprecated
whispRegStatus
OBJECT-TYPE
This shows the registration status of a link.[This variable is deprecated, please refer whispBoxLink OIDs]
1.3.6.1.4.1.161.19.3.1.2.4DisplayStringread-onlyobsolete
whispApsGPS
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.3
whispGPSStats
OBJECT-TYPE
This shows whether the AP is synchrinized to the GPS timer.
1.3.6.1.4.1.161.19.3.1.3.1INTEGER {gpsSynchronized(1), gpsLostSync(2), generatingSync(3)}read-onlycurrent
gpsSyncSource
OBJECT-TYPE
Source of GPS Sync Pulse.
1.3.6.1.4.1.161.19.3.1.3.2DisplayStringread-onlycurrent
gpsSyncStatus
OBJECT-TYPE
Current Live value of Sync Status.
1.3.6.1.4.1.161.19.3.1.3.3DisplayStringread-onlycurrent
gpsTrackingMode
OBJECT-TYPE
GPS tracking mode.
1.3.6.1.4.1.161.19.3.1.3.4DisplayStringread-onlycurrent
gpsTime
OBJECT-TYPE
GPS time.
1.3.6.1.4.1.161.19.3.1.3.5DisplayStringread-onlycurrent
gpsDate
OBJECT-TYPE
GPS date.
1.3.6.1.4.1.161.19.3.1.3.6DisplayStringread-onlycurrent
gpsSatellitesTracked
OBJECT-TYPE
Returns Current number of satellites GPS is tracking in string format .use gpsSatellitesTrackedInt to get the value in integer
1.3.6.1.4.1.161.19.3.1.3.7DisplayStringread-onlycurrent
gpsSatellitesVisible
OBJECT-TYPE
Return Number of satellites GPS is seeing in string format.Use gpsSatellitesVisibleInt to get value in integer
1.3.6.1.4.1.161.19.3.1.3.8DisplayStringread-onlycurrent
gpsHeight
OBJECT-TYPE
GPS height.
1.3.6.1.4.1.161.19.3.1.3.9DisplayStringread-onlycurrent
gpsAntennaConnection
OBJECT-TYPE
Antenna Connection status.
1.3.6.1.4.1.161.19.3.1.3.10DisplayStringread-onlycurrent
gpsLatitude
OBJECT-TYPE
GPS Latitude.
1.3.6.1.4.1.161.19.3.1.3.11DisplayStringread-onlycurrent
gpsLongitude
OBJECT-TYPE
GPS Longitude.
1.3.6.1.4.1.161.19.3.1.3.12DisplayStringread-onlycurrent
gpsInvalidMsg
OBJECT-TYPE
Number of invalid messages.
1.3.6.1.4.1.161.19.3.1.3.13DisplayStringread-onlycurrent
gpsRestartCount
OBJECT-TYPE
Number of GPS unit restarts.
1.3.6.1.4.1.161.19.3.1.3.14INTEGERread-onlycurrent
gpsReInitCount
OBJECT-TYPE
GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device.
1.3.6.1.4.1.161.19.3.1.3.15INTEGERread-onlycurrent
gpsReceiverInfo
OBJECT-TYPE
A textual string contains information on GPS receiver.
1.3.6.1.4.1.161.19.3.1.3.16DisplayStringread-onlycurrent
gpsFreeRun
OBJECT-TYPE
This variable is deprecated. Setting this value to false will set AutoSync. Setting this value to true will set AutoSync plus Free Run.
1.3.6.1.4.1.161.19.3.1.3.17INTEGER {disable(0), enable(1)}read-writecurrent
autoSyncStatus
OBJECT-TYPE
Current Live value of Sync Status. Following values represent what sources have sync. (0) No Sync (1) On-board GPS Sync (2) Timing Port/UGPS Sync (3) On-board GPS and Timing Port/UGPS Sync (4) Canopy Sync Over Power Port (5) On-board GPS and Canopy Sync Over Power (6) Timing Port/UGPS and Canopy Sync Over Power (7) On-board GPS, Timing Port/UGPS and Canopy Sync Over Power (8) Cambium Sync Over Power (10) Timing Port/UGPS and Cambium Sync Over Power (12) Canopy Sync and Cambium Sync Over Power (14) Timing Port/UGPS, Canopy Sync Over Power, and Cambium Sync Over Power
1.3.6.1.4.1.161.19.3.1.3.18INTEGER {noSync(0), onBoardGPSSync(1), timingPortUGPSSync(2), onBoardGPSAndTimingPortUGPSSync(3), powrPortSync(4), onBoardGPSAndPowrPortSync(5), timingPortUGPSAndPowrPortSync(6), onBoardGPSAndTimingPortUGPSAndPowrPortSync(7), cambiumSync(8), timingPortUGPSSyncAndCambiumSync(10), powrPortSyncAndCambiumSync(12), timingPortUGPSAndPowrPortSyncAndCambiumSync(14)}read-onlycurrent
gpsSatellitesTrackedInt
OBJECT-TYPE
Current number of satellites GPS is tracking in integer format.
1.3.6.1.4.1.161.19.3.1.3.19INTEGERread-onlycurrent
gpsSatellitesVisibleInt
OBJECT-TYPE
Number of satellites the GPS sees in integer format
1.3.6.1.4.1.161.19.3.1.3.20INTEGERread-onlycurrent
whispLinkTable
OBJECT-TYPE
Link Status Table
1.3.6.1.4.1.161.19.3.1.4not-accessiblecurrent
whispLinkEntry
OBJECT-TYPE
Link Status
1.3.6.1.4.1.161.19.3.1.4.1not-accessiblecurrent
linkLUID
OBJECT-TYPE
LUID number.
1.3.6.1.4.1.161.19.3.1.4.1.1INTEGER (2..239)read-onlycurrent
linkDescr
OBJECT-TYPE
A textual string containing information about the unit. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
1.3.6.1.4.1.161.19.3.1.4.1.2DisplayStringread-onlycurrent
linkPhysAddress
OBJECT-TYPE
Physical Address of the unit.
1.3.6.1.4.1.161.19.3.1.4.1.3PhysAddressread-onlycurrent
linkMtu
OBJECT-TYPE
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
1.3.6.1.4.1.161.19.3.1.4.1.4INTEGERread-onlycurrent
linkSpeed
OBJECT-TYPE
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
1.3.6.1.4.1.161.19.3.1.4.1.5Gauge32read-onlycurrent
linkOperStatus
OBJECT-TYPE
This variable is not used.
1.3.6.1.4.1.161.19.3.1.4.1.6INTEGER {up(1), down(2), testing(3)}read-onlyobsolete
linkInOctets
OBJECT-TYPE
The total number of octets received on the interface, including framing characters.
1.3.6.1.4.1.161.19.3.1.4.1.7Counter32read-onlycurrent
linkInUcastPkts
OBJECT-TYPE
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
1.3.6.1.4.1.161.19.3.1.4.1.8Counter32read-onlycurrent
linkInNUcastPkts
OBJECT-TYPE
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
1.3.6.1.4.1.161.19.3.1.4.1.9Counter32read-onlycurrent
linkInDiscards
OBJECT-TYPE
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.161.19.3.1.4.1.10Counter32read-onlycurrent
linkInError
OBJECT-TYPE
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.161.19.3.1.4.1.11Counter32read-onlycurrent
linkInUnknownProtos
OBJECT-TYPE
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.161.19.3.1.4.1.12Counter32read-onlycurrent
linkOutOctets
OBJECT-TYPE
The total number of octets transmitted out of the interface, including framing characters.
1.3.6.1.4.1.161.19.3.1.4.1.13Counter32read-onlycurrent
linkOutUcastPkts
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
1.3.6.1.4.1.161.19.3.1.4.1.14Counter32read-onlycurrent
linkOutNUcastPkts
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
1.3.6.1.4.1.161.19.3.1.4.1.15Counter32read-onlycurrent
linkOutDiscards
OBJECT-TYPE
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.161.19.3.1.4.1.16Counter32read-onlycurrent
linkOutError
OBJECT-TYPE
The number of outbound packets that could not be transmitted because of errors.
1.3.6.1.4.1.161.19.3.1.4.1.17Counter32read-onlycurrent
linkOutQLen
OBJECT-TYPE
Number of packets in output packet queue.
1.3.6.1.4.1.161.19.3.1.4.1.18Gauge32read-onlycurrent
linkSessState
OBJECT-TYPE
Current operational state of an interface. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Challenge 5 = Registering 6 = Not in use
1.3.6.1.4.1.161.19.3.1.4.1.19INTEGER {idle(0), inSession(1), clearing(2), reRegDnRst(3), authChal(4), registering(5), notInUse(6)}read-onlycurrent
linkESN
OBJECT-TYPE
Link Electronic serial number. It is MAC address.
1.3.6.1.4.1.161.19.3.1.4.1.20PhysAddressread-onlycurrent
linkRSSI
OBJECT-TYPE
The average RSSI reading of all packets received from an SM. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.1.4.1.21INTEGERread-onlycurrent
linkAveJitter
OBJECT-TYPE
The average Jitter reading of all packets received from an SM. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.1.4.1.22Gauge32 (0..15)read-onlycurrent
linkLastJitter
OBJECT-TYPE
Last jitter value. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.1.4.1.23Gauge32 (0..15)read-onlycurrent
linkAirDelay
OBJECT-TYPE
The current round trip air delay in bits measured between the AP and SM.
1.3.6.1.4.1.161.19.3.1.4.1.24INTEGERread-onlycurrent
linkRegCount
OBJECT-TYPE
The number of times an SM has registered to an AP.
1.3.6.1.4.1.161.19.3.1.4.1.25INTEGERread-onlycurrent
linkReRegCount
OBJECT-TYPE
The number of times an SM has tried to register with the AP while it still has an active session with the AP.
1.3.6.1.4.1.161.19.3.1.4.1.26INTEGERread-onlycurrent
linkTimeOut
OBJECT-TYPE
Link time out.
1.3.6.1.4.1.161.19.3.1.4.1.27INTEGERread-onlycurrent
linkLastRSSI
OBJECT-TYPE
The last RSSI reading of all packets received from an SM. Applicable to FSK radios only.
1.3.6.1.4.1.161.19.3.1.4.1.28INTEGERread-onlycurrent
sessionCount
OBJECT-TYPE
How many times has this mac been in/out of session.
1.3.6.1.4.1.161.19.3.1.4.1.29INTEGERread-onlycurrent
softwareVersion
OBJECT-TYPE
The software version of registered SM.
1.3.6.1.4.1.161.19.3.1.4.1.30DisplayStringread-onlycurrent
softwareBootVersion
OBJECT-TYPE
The software boot version of registered SM.
1.3.6.1.4.1.161.19.3.1.4.1.31DisplayStringread-onlycurrent
fpgaVersion
OBJECT-TYPE
The FPGA version of registered SM.
1.3.6.1.4.1.161.19.3.1.4.1.32DisplayStringread-onlycurrent
linkSiteName
OBJECT-TYPE
The site name of the registered SM.
1.3.6.1.4.1.161.19.3.1.4.1.33DisplayStringread-onlycurrent
avgPowerLevel
OBJECT-TYPE
The average power level of registered SM. For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM until new packets are received from the SM with it transmitting at its new power level. For MIMO this is the combined receive power.
1.3.6.1.4.1.161.19.3.1.4.1.34DisplayStringread-onlycurrent
lastPowerLevel
OBJECT-TYPE
The last power level of registered SM. For MIMO radios this is the combined receive power.
1.3.6.1.4.1.161.19.3.1.4.1.35DisplayStringread-onlycurrent
sesDownLinkRate
OBJECT-TYPE
Down link rate.
1.3.6.1.4.1.161.19.3.1.4.1.36INTEGERread-onlycurrent
sesDownLinkLimit
OBJECT-TYPE
Down link limit.
1.3.6.1.4.1.161.19.3.1.4.1.37INTEGERread-onlycurrent
sesUpLinkRate
OBJECT-TYPE
Uplink rate.
1.3.6.1.4.1.161.19.3.1.4.1.38INTEGERread-onlycurrent
sesUpLinkLimit
OBJECT-TYPE
Uplink limit.
1.3.6.1.4.1.161.19.3.1.4.1.39INTEGERread-onlycurrent
adaptRate
OBJECT-TYPE
Adapt rate of registered SM.
1.3.6.1.4.1.161.19.3.1.4.1.40DisplayStringread-onlycurrent
sesLoUpCIR
OBJECT-TYPE
Low priority up link CIR.
1.3.6.1.4.1.161.19.3.1.4.1.41INTEGERread-onlycurrent
sesLoDownCIR
OBJECT-TYPE
Low priority down link CIR.
1.3.6.1.4.1.161.19.3.1.4.1.42INTEGERread-onlycurrent
sesHiUpCIR
OBJECT-TYPE
High priority up link CIR.
1.3.6.1.4.1.161.19.3.1.4.1.43INTEGERread-onlycurrent
sesHiDownCIR
OBJECT-TYPE
High priority down link CIR.
1.3.6.1.4.1.161.19.3.1.4.1.44INTEGERread-onlycurrent
platformVer
OBJECT-TYPE
Platform Version.
1.3.6.1.4.1.161.19.3.1.4.1.45INTEGERread-onlycurrent
smSessionTmr
OBJECT-TYPE
SM session uptime
1.3.6.1.4.1.161.19.3.1.4.1.46TimeTicksread-onlycurrent
smSessionSeqNumMismatch
OBJECT-TYPE
The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication challenge and authentication response messages. This status is only valid in a system where encryption is enabled and no authentication server is configured.
1.3.6.1.4.1.161.19.3.1.4.1.47Counter32read-onlycurrent
dataVCNum
OBJECT-TYPE
The normal priority Data VC number in use for this link.
1.3.6.1.4.1.161.19.3.1.4.1.48INTEGERread-onlycurrent
hiPriQEn
OBJECT-TYPE
Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios.
1.3.6.1.4.1.161.19.3.1.4.1.49INTEGER {disabled(0), enabled(1)}read-onlycurrent
dataVCNumHiQ
OBJECT-TYPE
The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place.
1.3.6.1.4.1.161.19.3.1.4.1.50INTEGERread-onlycurrent
linkInOctetsHiQ
OBJECT-TYPE
The total number of octets received on High Priority Queue, including framing characters.
1.3.6.1.4.1.161.19.3.1.4.1.51Counter32read-onlycurrent
linkInUcastPktsHiQ
OBJECT-TYPE
The number of subnetwork-unicast packets on High Priority Queue delivered to a higher-layer protocol.
1.3.6.1.4.1.161.19.3.1.4.1.52Counter32read-onlycurrent
linkInNUcastPktsHiQ
OBJECT-TYPE
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets on High Priority Queue delivered to a higher-layer protocol.
1.3.6.1.4.1.161.19.3.1.4.1.53Counter32read-onlycurrent
linkInDiscardsHiQ
OBJECT-TYPE
The number of inbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.161.19.3.1.4.1.54Counter32read-onlycurrent
linkInErrorHiQ
OBJECT-TYPE
The number of inbound packets on High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.161.19.3.1.4.1.55Counter32read-onlycurrent
linkInUnknownProtosHiQ
OBJECT-TYPE
The number of packets received on High Priority Queue via the interface which were discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.161.19.3.1.4.1.56Counter32read-onlycurrent
linkOutOctetsHiQ
OBJECT-TYPE
The total number of octets on High Priority Queue transmitted out of the interface, including framing characters.
1.3.6.1.4.1.161.19.3.1.4.1.57Counter32read-onlycurrent
linkOutUcastPktsHiQ
OBJECT-TYPE
The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
1.3.6.1.4.1.161.19.3.1.4.1.58Counter32read-onlycurrent
linkOutNUcastPktsHiQ
OBJECT-TYPE
The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
1.3.6.1.4.1.161.19.3.1.4.1.59Counter32read-onlycurrent
linkOutDiscardsHiQ
OBJECT-TYPE
The number of outbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.161.19.3.1.4.1.60Counter32read-onlycurrent
linkOutErrorHiQ
OBJECT-TYPE
The number of outbound packets on High Priority Queue that could not be transmitted because of errors.
1.3.6.1.4.1.161.19.3.1.4.1.61Counter32read-onlycurrent
vcQOverflow
OBJECT-TYPE
The number of packets dropped due to Queue overflow on VC.
1.3.6.1.4.1.161.19.3.1.4.1.62Counter32read-onlycurrent
vcQOverflowHiQ
OBJECT-TYPE
The number of packets dropped due to Queue overflow on High Priority VC, if enabled.
1.3.6.1.4.1.161.19.3.1.4.1.63Counter32read-onlycurrent
p7p8HiPriQEn
OBJECT-TYPE
Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always.
1.3.6.1.4.1.161.19.3.1.4.1.64INTEGER {disabled-or-NA(0), enabled(1)}read-onlycurrent
p7p8HiPriQ
OBJECT-TYPE
Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0.
1.3.6.1.4.1.161.19.3.1.4.1.65Counter32read-onlycurrent
linkAirDelayns
OBJECT-TYPE
The current round trip air delay in nanoseconds measured between the AP and SM.
1.3.6.1.4.1.161.19.3.1.4.1.66INTEGERread-onlycurrent
linkQualityAPData
OBJECT-TYPE
Engineering use only. The current link quality of the SM's data from the AP. This is relative to the current modulation rate (1X, 2X, 3X, etc).
1.3.6.1.4.1.161.19.3.1.4.1.67DisplayStringread-onlycurrent
linkManagementIP
OBJECT-TYPE
Management IP Address of the unit. 0 indicates SM is not publically addressable.
1.3.6.1.4.1.161.19.3.1.4.1.69IpAddressread-onlycurrent
linkFragmentsReceived1XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 1x (QPSK) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.1.4.1.70Counter32read-onlycurrent
linkFragmentsReceived2XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.1.4.1.71Counter32read-onlycurrent
linkFragmentsReceived3XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.1.4.1.72Counter32read-onlycurrent
linkFragmentsReceived4XVertical
OBJECT-TYPE
Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.1.4.1.73Counter32read-onlycurrent
signalToNoiseRatioVertical
OBJECT-TYPE
Estimate of the receive signal to noise ratio in dB. For GenII OFDM and forward. For MIMO this is the vertical path.
1.3.6.1.4.1.161.19.3.1.4.1.74INTEGERread-onlycurrent
radiusReplyMsg
OBJECT-TYPE
The RADIUS Reply-Msg populated for the SM. This is only valid when using a backen AAA server.
1.3.6.1.4.1.161.19.3.1.4.1.75DisplayStringread-onlycurrent
autoUpdateStatus
OBJECT-TYPE
status of the auto update process
1.3.6.1.4.1.161.19.3.1.4.1.76INTEGERread-onlycurrent
radiusFramedIPAddress
OBJECT-TYPE
This Attribute indicates the IP address to be configured for the SM management interface.
1.3.6.1.4.1.161.19.3.1.4.1.77IpAddressread-onlycurrent
radiusFramedIPNetmask
OBJECT-TYPE
This Attribute indicates the netmask to be configured for the SM management interface.
1.3.6.1.4.1.161.19.3.1.4.1.78IpAddressread-onlycurrent
radiusDefaultGateway
OBJECT-TYPE
This Attribute indicates the default gateway to be configured for the SM management interface.
1.3.6.1.4.1.161.19.3.1.4.1.79IpAddressread-onlycurrent
linkFragmentsReceived1XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 1x (QPSK) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.1.4.1.80Counter32read-onlycurrent
linkFragmentsReceived2XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.1.4.1.81Counter32read-onlycurrent
linkFragmentsReceived3XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.1.4.1.82Counter32read-onlycurrent
linkFragmentsReceived4XHorizontal
OBJECT-TYPE
Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.1.4.1.83Counter32read-onlycurrent
signalToNoiseRatioHorizontal
OBJECT-TYPE
Estimate of the receive signal to noise ratio in dB. MIMO radios only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
1.3.6.1.4.1.161.19.3.1.4.1.84INTEGERread-onlycurrent
linkSignalStrengthRatio
OBJECT-TYPE
Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only.
1.3.6.1.4.1.161.19.3.1.4.1.86DisplayStringread-onlycurrent
linkRadioDbmHorizontal
OBJECT-TYPE
Receive power level of the horizontal antenna in dBm. MIMO radios only.
1.3.6.1.4.1.161.19.3.1.4.1.87DisplayStringread-onlycurrent
linkRadioDbmVertical
OBJECT-TYPE
Receive power level of the vertical antenna in dBm. MIMO radios only.
1.3.6.1.4.1.161.19.3.1.4.1.88DisplayStringread-onlycurrent
maxSMTxPwr
OBJECT-TYPE
Returns whether SM is transmitting at its configured max power level.
1.3.6.1.4.1.161.19.3.1.4.1.89INTEGERread-onlycurrent
productType
OBJECT-TYPE
Returns which type of product the SM/BHS is. 450 platform only.
1.3.6.1.4.1.161.19.3.1.4.1.90INTEGER {unknown(0), pmp450MIMOOFDM(1), pmp430SISOOFDM(2), pmp450SISOOFDM(3), ptp450(4), pmp450i(5), ptp450i(6), pmp450b(7), ptp450b(8)}read-onlycurrent
linkAdaptRateLowPri
OBJECT-TYPE
The current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO
1.3.6.1.4.1.161.19.3.1.4.1.91INTEGER {noSession(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)}read-onlycurrent
linkAdaptRateHighPri
OBJECT-TYPE
The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO
1.3.6.1.4.1.161.19.3.1.4.1.92INTEGER {noHighPriorityChannel(-1), noSession(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)}read-onlycurrent
avgPowerLevelInt
OBJECT-TYPE
The average power level of registered SM as Integer. For systems that support power control, this value can read '0' when the AP adjusts the transmit power of a SM until new packets are received from the SM with it transmitting at its new power level. For MIMO this is the combined receive power.
1.3.6.1.4.1.161.19.3.1.4.1.93INTEGERread-onlycurrent
mimoPowerLevelVertical
OBJECT-TYPE
For MIMO radios, the Vertical power level of registered SM as Integer. The Vertical Power (+45) level in case of 2.4GHz Dual slant MIMO
1.3.6.1.4.1.161.19.3.1.4.1.94INTEGERread-onlycurrent
mimoPowerLevelHorizontal
OBJECT-TYPE
For MIMO radios, the Horizontal power level of registered SM as Integer. The Horizontal Power(-45) level in case of 2.4GHz Dual slant MIMO
1.3.6.1.4.1.161.19.3.1.4.1.95INTEGERread-onlycurrent
linkSwVersion
OBJECT-TYPE
The swversion of registered SM, to be used internally.
1.3.6.1.4.1.161.19.3.1.4.1.96DisplayStringread-onlycurrent
spatialFrequency
OBJECT-TYPE
The spatial frequency of registered SM. Spatial Frequency is the phase advance of the wavefront from one antenna column to the next caused by the angle at which the wavefront impinges on the array. It is represented in integer units, with 1024 equating to 360 degrees per column. A value of 2048 is used to signify a spatial frequency that is not yet known or otherwise invalid. PMP 450m only.
1.3.6.1.4.1.161.19.3.1.4.1.97INTEGERread-onlycurrent
whispApsEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.5
whispApsRegEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.5.1
whispGPSEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.5.2
whispApsDfsEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.5.3
whispApRegulatoryEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.5.4
whispApRFOverloadEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.5.5
whispApsMumimoTrialEvent
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.5.6
whispApsGroups
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.6
whispApsStatus
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.7
regCount
OBJECT-TYPE
Number of registered SMs.
1.3.6.1.4.1.161.19.3.1.7.1Unsigned32read-onlycurrent
gpsStatus
OBJECT-TYPE
GPS status.
1.3.6.1.4.1.161.19.3.1.7.2DisplayStringread-onlycurrent
radioSlicingAp
OBJECT-TYPE
The variable is deprecated.
1.3.6.1.4.1.161.19.3.1.7.3INTEGERread-onlyobsolete
radioTxGainAp
OBJECT-TYPE
Radio transmit gain setting.
1.3.6.1.4.1.161.19.3.1.7.4INTEGERread-onlycurrent
dataSlotDwn
OBJECT-TYPE
Number of data slot down.
1.3.6.1.4.1.161.19.3.1.7.5INTEGERread-onlycurrent
dataSlotUp
OBJECT-TYPE
Number of data slot up.
1.3.6.1.4.1.161.19.3.1.7.6INTEGERread-onlycurrent
dataSlotUpHi
OBJECT-TYPE
Number of high priority data slot up.
1.3.6.1.4.1.161.19.3.1.7.7Unsigned32read-onlycurrent
upLnkAckSlot
OBJECT-TYPE
Uplink ack slots.
1.3.6.1.4.1.161.19.3.1.7.8Unsigned32read-onlycurrent
upLnkAckSlotHi
OBJECT-TYPE
Hige priority uplink ack slots.
1.3.6.1.4.1.161.19.3.1.7.9Unsigned32read-onlycurrent
dwnLnkAckSlot
OBJECT-TYPE
Downlink ack slots.
1.3.6.1.4.1.161.19.3.1.7.10Unsigned32read-onlycurrent
dwnLnkAckSlotHi
OBJECT-TYPE
Hige priority downlink ack slots.
1.3.6.1.4.1.161.19.3.1.7.11Unsigned32read-onlycurrent
numCtrSlot
OBJECT-TYPE
Number of contention slots.
1.3.6.1.4.1.161.19.3.1.7.12Unsigned32read-onlycurrent
numCtrSlotHi
OBJECT-TYPE
High priority control slot.
1.3.6.1.4.1.161.19.3.1.7.13Unsigned32read-onlycurrent
dfsStatus
OBJECT-TYPE
Dynamic frequency shifting status.
1.3.6.1.4.1.161.19.3.1.7.14DisplayStringread-onlycurrent
dfsStatusPrimary
OBJECT-TYPE
Dynamic frequency shifting status for Primary Channel.
1.3.6.1.4.1.161.19.3.1.7.15DisplayStringread-onlycurrent
dfsStatusAlt1
OBJECT-TYPE
Dynamic frequency shifting status for Alternate Channel 1
1.3.6.1.4.1.161.19.3.1.7.16DisplayStringread-onlycurrent
dfsStatusAlt2
OBJECT-TYPE
Dynamic frequency shifting status for Alternate Channel 2
1.3.6.1.4.1.161.19.3.1.7.17DisplayStringread-onlycurrent
maxRegSMCount
OBJECT-TYPE
Maximum number of unique Subscriber Modules registered with this AP at once
1.3.6.1.4.1.161.19.3.1.7.18INTEGERread-onlycurrent
systemTime
OBJECT-TYPE
Displays the system time of the unit
1.3.6.1.4.1.161.19.3.1.7.19DisplayStringread-onlycurrent
lastNTPTime
OBJECT-TYPE
Displays the last NTP time acquired by the AP
1.3.6.1.4.1.161.19.3.1.7.20DisplayStringread-onlycurrent
regulatoryStatus
OBJECT-TYPE
The current status of the regulatory check on the AP.
1.3.6.1.4.1.161.19.3.1.7.21DisplayStringread-onlycurrent
dhcpRlyAgntStat_reqRecvd
OBJECT-TYPE
Number of DHCP Requests received by the DHCP Relay.
1.3.6.1.4.1.161.19.3.1.7.22Counter32read-onlycurrent
dhcpRlyAgntStat_reqRelayed
OBJECT-TYPE
Number of DHCP Requests relayed by the DHCP Relay.
1.3.6.1.4.1.161.19.3.1.7.23Counter32read-onlycurrent
dhcpRlyAgntStat_reqDiscards
OBJECT-TYPE
Number of DHCP Requests discarded by the DHCP Relay.
1.3.6.1.4.1.161.19.3.1.7.24Counter32read-onlycurrent
dhcpRlyAgntStat_respRecvd
OBJECT-TYPE
Number of DHCP Replies received by the DHCP Relay.
1.3.6.1.4.1.161.19.3.1.7.25Counter32read-onlycurrent
dhcpRlyAgntStat_respRelayed
OBJECT-TYPE
Number of DHCP Replies relayed by the DHCP Relay.
1.3.6.1.4.1.161.19.3.1.7.26Counter32read-onlycurrent
dhcpRlyAgntStat_respDiscards
OBJECT-TYPE
Number of DHCP Replies discarded by the DHCP Relay.
1.3.6.1.4.1.161.19.3.1.7.27Counter32read-onlycurrent
dhcpRlyAgntStat_untrustedDiscards
OBJECT-TYPE
Number of untrusted messages discarded by the DHCP Relay.
1.3.6.1.4.1.161.19.3.1.7.28Counter32read-onlycurrent
dhcpRlyAgntStat_maxHopDiscards
OBJECT-TYPE
Number of messages discarded by the DHCP Relay due to exceeded max hop.
1.3.6.1.4.1.161.19.3.1.7.29Counter32read-onlycurrent
dhcpRlyAgntStat_pktTooBig
OBJECT-TYPE
Number of messages forwarded without relay information by the DHCP Relay due to relay information exceeding max message size.
1.3.6.1.4.1.161.19.3.1.7.30Counter32read-onlycurrent
dhcpRlyAgntStat_invalidGiaddrDiscards
OBJECT-TYPE
Number of messages discarded by the DHCP Relay due to invalid giaddr in packet.
1.3.6.1.4.1.161.19.3.1.7.31Counter32read-onlycurrent
regFailureCount
OBJECT-TYPE
The Total number or Registration Grant Failures.
1.3.6.1.4.1.161.19.3.1.7.32Counter32read-onlycurrent
ntpLogSNMP
OBJECT-TYPE
NTP Log
1.3.6.1.4.1.161.19.3.1.7.33EventStringread-onlycurrent
uGPSPowerStatus
OBJECT-TYPE
Current UGPS Power Status (UGPS capable APs only).
1.3.6.1.4.1.161.19.3.1.7.34DisplayStringread-onlycurrent
rfOutDiscardRate
OBJECT-TYPE
Percentage of OutDiscards on the RF link (RF Overload %) in the last minute.
1.3.6.1.4.1.161.19.3.1.7.35INTEGER (0..100)read-onlycurrent
autoUpdateGlobalStatus
OBJECT-TYPE
Status of the Auto-Update Command
1.3.6.1.4.1.161.19.3.1.7.36INTEGERread-onlycurrent
currentRadioFreqCarrier
OBJECT-TYPE
Returns the current operating frequency of the AP. Units vary by platform: FSK 5.2, 5.4, 5.7 GHz: OID returns MHz FSK 900 MHz, 2.4 GHz: OID returns 100's of KHz OFDM: OID returns 10's of KHz
1.3.6.1.4.1.161.19.3.1.7.37INTEGERread-onlycurrent
mumimoMode
OBJECT-TYPE
Returns the current operating mode of MU-MIMO. PMP 450m only.
1.3.6.1.4.1.161.19.3.1.7.38DisplayStringread-onlycurrent
vcCount
OBJECT-TYPE
Number of VCs allocated across all registered SMs.
1.3.6.1.4.1.161.19.3.1.7.39Unsigned32read-onlycurrent
mumimoTrialPercentageRemaining
OBJECT-TYPE
Percentage of remaining MU-MIMO Trial Licenses
1.3.6.1.4.1.161.19.3.1.7.40INTEGER (0..100)read-onlycurrent
whispFailedRegTable
OBJECT-TYPE
List of link test results
1.3.6.1.4.1.161.19.3.1.8not-accessiblecurrent
whispFailedRegEntry
OBJECT-TYPE
List of Failed ESNs
1.3.6.1.4.1.161.19.3.1.8.1not-accessiblecurrent
regGrantReason
OBJECT-TYPE
The registration failure reason
1.3.6.1.4.1.161.19.3.1.8.1.1INTEGER {reggnt-valid(0), reggnt-outofrange(1), reggnt-nolUIDS(2), reggnt-rerange(3), reggnt-authfail(4), reggnt-encryptfail(5), reggnt-poweradjust(6), reggnt-novcs(7), reggnt-failvcreserve(8), reggnt-failvcactive(9), reggnt-failhivcdata(10), reggnt-failsmlimit(11), reggnt-fail95orabove(12)}read-onlycurrent
regFailESN
OBJECT-TYPE
The ESN that failed to register
1.3.6.1.4.1.161.19.3.1.8.1.2PhysAddressread-onlycurrent
regFailTime
OBJECT-TYPE
The number of ticks that occurred when the ESN failed to register
1.3.6.1.4.1.161.19.3.1.8.1.3TimeTicksread-onlycurrent
regFailSeqNum
OBJECT-TYPE
The sequence when the register failure was given.
1.3.6.1.4.1.161.19.3.1.8.1.4Counter32read-onlycurrent
regFailReasonText
OBJECT-TYPE
The text description of the failure.
1.3.6.1.4.1.161.19.3.1.8.1.5DisplayStringread-onlycurrent
whispApsDNS
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.9
ntpDomainNameAppend
OBJECT-TYPE
Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', ntpServer is set to 'ntp', and ntpDomainNameAppend is set to appendDomain, the ntpServer name used would be 'ntp.example.com'.
1.3.6.1.4.1.161.19.3.1.9.1INTEGER {disableDomain(0), appendDomain(1)}read-writecurrent
ntpServer1
OBJECT-TYPE
NTP Server 1 Address. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.2DisplayStringread-writecurrent
ntpServer2
OBJECT-TYPE
NTP Server 2 Address. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.3DisplayStringread-writecurrent
ntpServer3
OBJECT-TYPE
NTP Server 3 Address. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.4DisplayStringread-writecurrent
dhcprDomainNameAppend
OBJECT-TYPE
Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', dhcprServer is set to 'dhcpr', and dhcprDomainNameAppend is set to appendDomain, the dhcprServer name used would be 'dhcpr.example.com'.
1.3.6.1.4.1.161.19.3.1.9.5INTEGER {disableDomain(0), appendDomain(1)}read-writecurrent
dhcprServer
OBJECT-TYPE
DHCP Server IP which will be used for forwarding DHCP messages by the DHCP Relay Agent in the MultiPoint AP. - Format is either an IP address or DNS name. - Default is 255.255.255.255 (broadcast).
1.3.6.1.4.1.161.19.3.1.9.6DisplayStringread-writecurrent
authDomainNameAppend
OBJECT-TYPE
Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', authServer1 is set to 'auth1', and authDomainNameAppend is set to appendDomain, the authServer1 name used would be 'auth1.example.com'.
1.3.6.1.4.1.161.19.3.1.9.7INTEGER {disableDNSDomain(0), enableDNSDomain(1)}read-writecurrent
authServer1
OBJECT-TYPE
Authentication Server 1. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.8DisplayStringread-writecurrent
authServer2
OBJECT-TYPE
Authentication Server 2. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.9DisplayStringread-writecurrent
authServer3
OBJECT-TYPE
Authentication Server 3. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.10DisplayStringread-writecurrent
authServer4
OBJECT-TYPE
Authentication Server 4. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.11DisplayStringread-writecurrent
authServer5
OBJECT-TYPE
Authentication Server 5. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.12DisplayStringread-writecurrent
acctDomainNameAppend
OBJECT-TYPE
Obsoleted. Use whispApsDNS.authDomainNameAppend.
1.3.6.1.4.1.161.19.3.1.9.13INTEGER {disableDomain(0), appendDomain(1)}read-writeobsolete
userAuthServer1
OBJECT-TYPE
User Authentication Server 1. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.14DisplayStringread-writecurrent
userAuthServer2
OBJECT-TYPE
User Authentication Server 2. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.15DisplayStringread-writecurrent
userAuthServer3
OBJECT-TYPE
User Authentication Server 3. Format is either an IP address or DNS name.
1.3.6.1.4.1.161.19.3.1.9.16DisplayStringread-writecurrent
userAuthDomainNameAppend
OBJECT-TYPE
Select whether to append the configured management domain name to the configured user authentication server names. For example, if dnsMgmtDomainName is set to 'example.com', authServer1 is set to 'auth1', and userAuthDomainNameAppend is set to enableDNSDomain, the authServer1 name used would be 'auth1.example.com'.
1.3.6.1.4.1.161.19.3.1.9.17INTEGER {disableDNSDomain(0), enableDNSDomain(1)}read-writecurrent
whispApsRFConfig
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.10
whispApsRFConfigRadios
OBJECT-TYPE
Radio configuration table.
1.3.6.1.4.1.161.19.3.1.10.1not-accessiblecurrent
whispApsRFConfigRadioEntry
OBJECT-TYPE
Radio configuration entry.
1.3.6.1.4.1.161.19.3.1.10.1.1not-accessiblecurrent
radioFreqCarrier
OBJECT-TYPE
RF Frequency. Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available frequencies. 0: wired.
1.3.6.1.4.1.161.19.3.1.10.1.1.1INTEGER {wired(0)}read-writecurrent
radioDownlinkPercent
OBJECT-TYPE
This is the percentage of frame data space allocated for downlink. Various radio platforms and regions will have different allowable downlink percentages.
1.3.6.1.4.1.161.19.3.1.10.1.1.2INTEGER (1..99)read-writecurrent
radioMaxRange
OBJECT-TYPE
Access point max range.
1.3.6.1.4.1.161.19.3.1.10.1.1.3INTEGERread-writecurrent
radioControlSlots
OBJECT-TYPE
Total number of contention slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios). For PMP 450 the minimum is 1 control slot, others minimum is zero. Maximum contention slots is 15.
1.3.6.1.4.1.161.19.3.1.10.1.1.4INTEGERread-writecurrent
radioTransmitOutputPower
OBJECT-TYPE
Transmitter output power.
1.3.6.1.4.1.161.19.3.1.10.1.1.5INTEGERread-writecurrent
radioColorCode
OBJECT-TYPE
Color code.
1.3.6.1.4.1.161.19.3.1.10.1.1.6INTEGER (0..254)read-writecurrent
whispApsControls
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.11
clearLinkTableStats
OBJECT-TYPE
Setting this to a nonzero value will clear the link table stats.
1.3.6.1.4.1.161.19.3.1.11.1INTEGERread-writecurrent
whispApsFrUtlStats
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.12
whispApsFrUtlStatsIntervalLow
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.12.1
frUtlLowTotalDownlinkUtilization
OBJECT-TYPE
Percentage of total downlink utilization in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.1INTEGERread-onlycurrent
frUtlLowTotalUplinkUtilization
OBJECT-TYPE
Percentage of total uplink utilization in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.2INTEGERread-onlycurrent
frUtlLowTotalDownlinkSlots
OBJECT-TYPE
Total downlink data slots in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.3INTEGERread-onlycurrent
frUtlLowDownlinkLowPrioSlots
OBJECT-TYPE
Number of data slots used for downlink low priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.4INTEGERread-onlycurrent
frUtlLowDownlinkHiPrioSlots
OBJECT-TYPE
Number of data slots used for downlink high priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.5INTEGERread-onlycurrent
frUtlLowDownlinkBcastSlots
OBJECT-TYPE
Number of data slots used for downlink broadcast and multicast traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.6INTEGERread-onlycurrent
frUtlLowDownlinkAckSlots
OBJECT-TYPE
Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.7INTEGERread-onlycurrent
frUtlLowDownlinkCntlMsgSlots
OBJECT-TYPE
Number of data slots used for downlink registration control messages in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.8INTEGERread-onlycurrent
frUtlLowTotalUplinkSlots
OBJECT-TYPE
Total uplink data slots in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.9INTEGERread-onlycurrent
frUtlLowUplinkLowPrioSlots
OBJECT-TYPE
Number of data slots used for uplink low priority traffic in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.10INTEGERread-onlycurrent
frUtlLowUplinkHiPrioSlots
OBJECT-TYPE
Number of data slots used for uplink high priority traffic in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.11INTEGERread-onlycurrent
frUtlLowUplinkAckSlots
OBJECT-TYPE
Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.12INTEGERread-onlycurrent
frUtlLowMaxDownlinkSlots
OBJECT-TYPE
Maximum possible downlink data slots for a minute. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 60). Downlink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.13INTEGERread-onlycurrent
frUtlLowMaxUplinkSlots
OBJECT-TYPE
Maximum possible uplink data slots for a minute. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 60). Uplink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.14INTEGERread-onlycurrent
frUtlLowEthInDiscards
OBJECT-TYPE
Number of incoming ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.15INTEGERread-onlycurrent
frUtlLowEthOutDiscards
OBJECT-TYPE
Number of outgoing ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.16INTEGERread-onlycurrent
frUtlLowRFInDiscards
OBJECT-TYPE
Number of incoming radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.17INTEGERread-onlycurrent
frUtlLowRFOutDiscards
OBJECT-TYPE
Number of outgoing radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.18INTEGERread-onlycurrent
frUtlLowIntervalBwReqPercentage
OBJECT-TYPE
Percentage of bandwidth request received in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.1.19INTEGERread-onlycurrent
frUtlLowIntervalBwReqRx
OBJECT-TYPE
Number of bandwidth request received in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.1.20INTEGERread-onlycurrent
frUtlLowIntervalBwReqMissed
OBJECT-TYPE
Number of bandwidth request missed in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.1.21INTEGERread-onlycurrent
frUtlLowContentionSlots
OBJECT-TYPE
Number of scheduled contention slots available in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.22INTEGERread-onlycurrent
frUtlLowAvgDownlinkSlots
OBJECT-TYPE
Average downlink data slots per frame in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.1.23INTEGERread-onlycurrent
frUtlLowAvgUplinkSlots
OBJECT-TYPE
Average uplink data slots per frame in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.24INTEGERread-onlycurrent
frUtlLowAvgContentionSlots
OBJECT-TYPE
Average contention slots per frame in the last 1 minute. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.25INTEGERread-onlycurrent
frUtlLowMaxContentionSlots
OBJECT-TYPE
Maximum possible contention slots for 1 minute. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 60(seconds)). Uplink slots and contention slots in a frame depend on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.1.26INTEGERread-onlycurrent
frUtlLowDownlinkAckUtilization
OBJECT-TYPE
Percentage of downlink Canopy MAC Acknowledgment utilization in the last 1 minute.
1.3.6.1.4.1.161.19.3.1.12.1.27INTEGERread-onlycurrent
frUtlLowDownlinkBcastMcastUtilization
OBJECT-TYPE
Percentage of downlink Broadcast/Multicast utilization in the last 1 minute.
1.3.6.1.4.1.161.19.3.1.12.1.28INTEGERread-onlycurrent
frUtlLowMumimoDownlinkSectorUtilization
OBJECT-TYPE
Percentage of MU-MIMO downlink Sector utilization in the last 1 minute. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.1.29INTEGERread-onlycurrent
frUtlLowMumimoDownlinkMumimoUtilization
OBJECT-TYPE
Percentage of MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.1.30INTEGERread-onlycurrent
frUtlLowMumimoDownlinkSumimoUtilization
OBJECT-TYPE
Percentage of SU-MIMO downlink utilization in the last 1 minute. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.1.31INTEGERread-onlycurrent
frUtlLowMumimoDownlinkMultiplexingGain
OBJECT-TYPE
MU-MIMO Multiplexing Gain in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.1.32INTEGER (0..700)read-onlycurrent
frUtlLowMumimoDownlinkAvgGroupSize
OBJECT-TYPE
Average MU-MIMO Group Size in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.1.33INTEGER (0..700)read-onlycurrent
whispApsFrUtlStatsIntervalMedium
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.12.2
frUtlMedTotalDownlinkUtilization
OBJECT-TYPE
Percentage of total downlink utilization in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.1INTEGERread-onlycurrent
frUtlMedTotalUplinkUtilization
OBJECT-TYPE
Percentage of total uplink utilization in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.2INTEGERread-onlycurrent
frUtlMedTotalDownlinkSlots
OBJECT-TYPE
Total downlink data slots in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.3INTEGERread-onlycurrent
frUtlMedDownlinkLowPrioSlots
OBJECT-TYPE
Number of data slots used for downlink low priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.4INTEGERread-onlycurrent
frUtlMedDownlinkHiPrioSlots
OBJECT-TYPE
Number of data slots used for downlink high priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.5INTEGERread-onlycurrent
frUtlMedDownlinkBcastSlots
OBJECT-TYPE
Number of data slots used for downlink broadcast and multicast traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.6INTEGERread-onlycurrent
frUtlMedDownlinkAckSlots
OBJECT-TYPE
Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.7INTEGERread-onlycurrent
frUtlMedDownlinkCntlMsgSlots
OBJECT-TYPE
Number of data slots used for downlink registration control messages in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.8INTEGERread-onlycurrent
frUtlMedTotalUplinkSlots
OBJECT-TYPE
Total uplink data slots in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.9INTEGERread-onlycurrent
frUtlMedUplinkLowPrioSlots
OBJECT-TYPE
Number of data slots used for uplink low priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.10INTEGERread-onlycurrent
frUtlMedUplinkHiPrioSlots
OBJECT-TYPE
Number of data slots used for uplink high priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.11INTEGERread-onlycurrent
frUtlMedUplinkAckSlots
OBJECT-TYPE
Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.12INTEGERread-onlycurrent
frUtlMedMaxDownlinkSlots
OBJECT-TYPE
Maximum possible downlink data slots for 5 minutes. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 5 * 60 (seconds)). Downlink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.13INTEGERread-onlycurrent
frUtlMedMaxUplinkSlots
OBJECT-TYPE
Maximum possible uplink data slots for 5 minutes. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 5 * 60(seconds)). Uplink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.14INTEGERread-onlycurrent
frUtlMedEthInDiscards
OBJECT-TYPE
Number of incoming ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.15INTEGERread-onlycurrent
frUtlMedEthOutDiscards
OBJECT-TYPE
Number of outgoing ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.16INTEGERread-onlycurrent
frUtlMedRFInDiscards
OBJECT-TYPE
Number of incoming radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.17INTEGERread-onlycurrent
frUtlMedRFOutDiscards
OBJECT-TYPE
Number of outgoing radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.18INTEGERread-onlycurrent
frUtlMediumIntervalBwReqPercentage
OBJECT-TYPE
Percentage of bandwidth request received in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.2.19INTEGERread-onlycurrent
frUtlMediumIntervalBwReqRx
OBJECT-TYPE
Number of bandwidth request received in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.2.20INTEGERread-onlycurrent
frUtlMediumIntervalBwReqMissed
OBJECT-TYPE
Number of bandwidth request missed in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.2.21INTEGERread-onlycurrent
frUtlMediumContentionSlots
OBJECT-TYPE
Number of scheduled contention slots available in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.22INTEGERread-onlycurrent
frUtlMediumAvgDownlinkSlots
OBJECT-TYPE
Average downlink data slots per frame in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.2.23INTEGERread-onlycurrent
frUtlMediumAvgUplinkSlots
OBJECT-TYPE
Average uplink data slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.24INTEGERread-onlycurrent
frUtlMediumAvgContentionSlots
OBJECT-TYPE
Average contention slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.25INTEGERread-onlycurrent
frUtlMediumMaxContentionSlots
OBJECT-TYPE
Maximum possible contention slots for 5 minutes. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 5 * 60(seconds)). Uplink slots and contention slots in a frame depend on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.2.26INTEGERread-onlycurrent
frUtlMedDownlinkAckUtilization
OBJECT-TYPE
Percentage of downlink Canopy MAC Acknowledgment utilization in the last 5 minutes.
1.3.6.1.4.1.161.19.3.1.12.2.27INTEGERread-onlycurrent
frUtlMedDownlinkBcastMcastUtilization
OBJECT-TYPE
Percentage of downlink Broadcast/Multicast utilization in the last 5 minutes.
1.3.6.1.4.1.161.19.3.1.12.2.28INTEGERread-onlycurrent
frUtlMedMumimoDownlinkSectorUtilization
OBJECT-TYPE
Percentage of MU-MIMO downlink Sector utilization in the last 5 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.2.29INTEGERread-onlycurrent
frUtlMedMumimoDownlinkMumimoUtilization
OBJECT-TYPE
Percentage of MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.2.30INTEGERread-onlycurrent
frUtlMedMumimoDownlinkSumimoUtilization
OBJECT-TYPE
Percentage of SU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.2.31INTEGERread-onlycurrent
frUtlMedMumimoDownlinkMultiplexingGain
OBJECT-TYPE
MU-MIMO Multiplexing Gain in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.2.32INTEGER (0..700)read-onlycurrent
frUtlMedMumimoDownlinkAvgGroupSize
OBJECT-TYPE
Average MU-MIMO Group Size in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.2.33INTEGER (0..700)read-onlycurrent
whispApsFrUtlStatsIntervalHigh
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.12.3
frUtlHighTotalDownlinkUtilization
OBJECT-TYPE
Percentage of total downlink utilization in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.1INTEGERread-onlycurrent
frUtlHighTotalUplinkUtilization
OBJECT-TYPE
Percentage of total uplink utilization in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.2INTEGERread-onlycurrent
frUtlHighTotalDownlinkSlots
OBJECT-TYPE
Total downlink data slots in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.3INTEGERread-onlycurrent
frUtlHighDownlinkLowPrioSlots
OBJECT-TYPE
Number of data slots used for downlink low priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.4INTEGERread-onlycurrent
frUtlHighDownlinkHiPrioSlots
OBJECT-TYPE
Number of data slots used for downlink high priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.5INTEGERread-onlycurrent
frUtlHighDownlinkBcastSlots
OBJECT-TYPE
Number of data slots used for downlink broadcast and multicast traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.6INTEGERread-onlycurrent
frUtlHighDownlinkAckSlots
OBJECT-TYPE
Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.7INTEGERread-onlycurrent
frUtlHighDownlinkCntlMsgSlots
OBJECT-TYPE
Number of data slots used for downlink registration control messages in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.8INTEGERread-onlycurrent
frUtlHighTotalUplinkSlots
OBJECT-TYPE
Total uplink data slots in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.9INTEGERread-onlycurrent
frUtlHighUplinkLowPrioSlots
OBJECT-TYPE
Number of data slots used for uplink low priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.10INTEGERread-onlycurrent
frUtlHighUplinkHiPrioSlots
OBJECT-TYPE
Number of data slots used for uplink high priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.11INTEGERread-onlycurrent
frUtlHighUplinkAckSlots
OBJECT-TYPE
Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.12INTEGERread-onlycurrent
frUtlHighMaxDownlinkSlots
OBJECT-TYPE
Maximum possible downlink data slots for 15 minutes. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). Downlink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.13INTEGERread-onlycurrent
frUtlHighMaxUplinkSlots
OBJECT-TYPE
Maximum possible uplink data slots for 15 minutes. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). Uplink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.14INTEGERread-onlycurrent
frUtlHighEthInDiscards
OBJECT-TYPE
Number of incoming ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.15INTEGERread-onlycurrent
frUtlHighEthOutDiscards
OBJECT-TYPE
Number of outgoing ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.16INTEGERread-onlycurrent
frUtlHighRFInDiscards
OBJECT-TYPE
Number of incoming radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.17INTEGERread-onlycurrent
frUtlHighRFOutDiscards
OBJECT-TYPE
Number of outgoing radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.18INTEGERread-onlycurrent
frUtlHighIntervalBwReqPercentage
OBJECT-TYPE
Percentage of bandwidth request received in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.3.19INTEGERread-onlycurrent
frUtlHighIntervalBwReqRx
OBJECT-TYPE
Number of bandwidth request received in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.3.20INTEGERread-onlycurrent
frUtlHighIntervalBwReqMissed
OBJECT-TYPE
Number of bandwidth request missed in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic.
1.3.6.1.4.1.161.19.3.1.12.3.21INTEGERread-onlycurrent
frUtlHighContentionSlots
OBJECT-TYPE
Number of scheduled contention slots available in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.22INTEGERread-onlycurrent
frUtlHighAvgDownlinkSlots
OBJECT-TYPE
Average downlink data slots per frame in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.12.3.23INTEGERread-onlycurrent
frUtlHighAvgUplinkSlots
OBJECT-TYPE
Average uplink data slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.24INTEGERread-onlycurrent
frUtlHighAvgContentionSlots
OBJECT-TYPE
Average contention slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.25INTEGERread-onlycurrent
frUtlHighMaxContentionSlots
OBJECT-TYPE
Maximum possible contention slots for 15 minutes. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 15 * 60(seconds)). Uplink slots and contention slots in a frame depend on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform.
1.3.6.1.4.1.161.19.3.1.12.3.26INTEGERread-onlycurrent
frUtlHighDownlinkAckUtilization
OBJECT-TYPE
Percentage of downlink Canopy MAC Acknowledgment utilization in the last 15 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.3.27INTEGERread-onlycurrent
frUtlHighDownlinkBcastMcastUtilization
OBJECT-TYPE
Percentage of downlink Broadcast/Multicast utilization in the last 15 minutes.
1.3.6.1.4.1.161.19.3.1.12.3.28INTEGERread-onlycurrent
frUtlHighMumimoDownlinkSectorUtilization
OBJECT-TYPE
Percentage of MU-MIMO downlink Sector utilization in the last 15 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.3.29INTEGERread-onlycurrent
frUtlHighMumimoDownlinkMumimoUtilization
OBJECT-TYPE
Percentage of MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.3.30INTEGERread-onlycurrent
frUtlHighMumimoDownlinkSumimoUtilization
OBJECT-TYPE
Percentage of SU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.3.31INTEGERread-onlycurrent
frUtlHighMumimoDownlinkMultiplexingGain
OBJECT-TYPE
MU-MIMO Multiplexing Gain in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.3.32INTEGER (0..700)read-onlycurrent
frUtlHighMumimoDownlinkAvgGroupSize
OBJECT-TYPE
Average MU-MIMO Group Size in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.3.33INTEGER (0..700)read-onlycurrent
whispApsFrUtlStatsMumimoSpatialTable
OBJECT-TYPE
MU-MIMO Spatial Utilization Metrics.
1.3.6.1.4.1.161.19.3.1.12.4not-accessiblecurrent
whispApsFrUtlStatsMumimoSpatialEntry
OBJECT-TYPE
MU-MIMO Spatial Utilization Metrics.
1.3.6.1.4.1.161.19.3.1.12.4.1not-accessiblecurrent
frUtlMumimoDownlinkUtilizationSfBin
OBJECT-TYPE
Spatial Frequency Bin. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.1INTEGER (0..32)read-onlycurrent
frUtlMumimoDownlinkUtilizationSfRange
OBJECT-TYPE
Spatial Frequency Range. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.2DisplayStringread-onlycurrent
frUtlMumimoDownlinkUtilizationAzimuth
OBJECT-TYPE
Azimuth Ranges per Spatial Frequency bin. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.3DisplayStringread-onlycurrent
frUtlMumimoDownlinkUtilizationVcRange
OBJECT-TYPE
VCs in Spatial Frequency Range. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.4DisplayStringread-onlycurrent
frUtlMumimoDownlinkInstantaneousUtilization
OBJECT-TYPE
Instantanous MU-MIMO downlink utilization. This updates every 500ms. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.5INTEGERread-onlycurrent
frUtlLowTotalMumimoDownlinkUtilization
OBJECT-TYPE
Percentage of total MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.6INTEGERread-onlycurrent
frUtlMedTotalMumimoDownlinkUtilization
OBJECT-TYPE
Percentage of total MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.7INTEGERread-onlycurrent
frUtlHighTotalMumimoDownlinkUtilization
OBJECT-TYPE
Percentage of total MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.8INTEGERread-onlycurrent
frUtlLowMaxMumimoDownlinkUtilization
OBJECT-TYPE
Maximum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.9INTEGERread-onlycurrent
frUtlMedMaxMumimoDownlinkUtilization
OBJECT-TYPE
Maximum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.10INTEGERread-onlycurrent
frUtlHighMaxMumimoDownlinkUtilization
OBJECT-TYPE
Maximum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.11INTEGERread-onlycurrent
frUtlLowMinMumimoDownlinkUtilization
OBJECT-TYPE
Minimum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.12INTEGERread-onlycurrent
frUtlMedMinMumimoDownlinkUtilization
OBJECT-TYPE
Minimum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.13INTEGERread-onlycurrent
frUtlHighMinMumimoDownlinkUtilization
OBJECT-TYPE
Minimum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.4.1.14INTEGERread-onlycurrent
whispApsFrUtlStatsMumimoDistributionTable
OBJECT-TYPE
MU-MIMO Distribution Metrics.
1.3.6.1.4.1.161.19.3.1.12.5not-accessiblecurrent
whispApsFrUtlStatsMumimoDistributionEntry
OBJECT-TYPE
MU-MIMO Distribution Metrics.
1.3.6.1.4.1.161.19.3.1.12.5.1not-accessiblecurrent
frUtlMumimoDownlinkDistributionIndex
OBJECT-TYPE
MU-MIMO downlink Distribution Table Index. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.5.1.1INTEGER (0..9)read-onlycurrent
frUtlMumimoDownlinkDistributionGroup
OBJECT-TYPE
MU-MIMO downlink Distribution Group. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.5.1.2DisplayStringread-onlycurrent
frUtlMumimoDownlinkDistributionVc
OBJECT-TYPE
MU-MIMO downlink VC Distribution. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.5.1.3DisplayStringread-onlycurrent
frUtlMumimoDownlinkDistributionMedianSlotCount
OBJECT-TYPE
MU-MIMO downlink Median Slot Count Distribution. MU-MIMO only.
1.3.6.1.4.1.161.19.3.1.12.5.1.4INTEGERread-onlycurrent
whispApsLQI
OBJECT-IDENTITY
1.3.6.1.4.1.161.19.3.1.13
whispApsLQILowInterval
OBJECT-TYPE
Link Quality Indicator one minute interval table.
1.3.6.1.4.1.161.19.3.1.13.1not-accessiblecurrent
whispApsLQILowIntervalEntry
OBJECT-TYPE
Link Quality Indicator for one minute Interval entry.
1.3.6.1.4.1.161.19.3.1.13.1.1not-accessiblecurrent
lqiLowLinkLUID
OBJECT-TYPE
Logical User Identfication (LUID) number
1.3.6.1.4.1.161.19.3.1.13.1.1.1INTEGER (2..239)read-onlycurrent
lqiLowLQI
OBJECT-TYPE
Link Quality Indicator for one minute interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-registrations and beacon percentage.
1.3.6.1.4.1.161.19.3.1.13.1.1.2INTEGER (0..100)read-onlycurrent
lqiLowDownlinkQualityIndex
OBJECT-TYPE
Downlink Quality Index for one minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.1.1.3INTEGER (0..100)read-onlycurrent
lqiLowDownlinkAverageActualRate
OBJECT-TYPE
Downlink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X
1.3.6.1.4.1.161.19.3.1.13.1.1.4INTEGER (0..80)read-onlycurrent
lqiLowDownlinkExpectedRate
OBJECT-TYPE
Downlink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference.
1.3.6.1.4.1.161.19.3.1.13.1.1.5INTEGER (0..80)read-onlycurrent
lqiLowUplinkQualityIndex
OBJECT-TYPE
Uplink Quality Index for one minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.1.1.6INTEGER (0..100)read-onlycurrent
lqiLowUplinkAverageActualRate
OBJECT-TYPE
Uplink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X
1.3.6.1.4.1.161.19.3.1.13.1.1.7INTEGER (0..80)read-onlycurrent
lqiLowUplinkExpectedRate
OBJECT-TYPE
Uplink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference.
1.3.6.1.4.1.161.19.3.1.13.1.1.8INTEGER (0..80)read-onlycurrent
lqiLowBeaconQualityIndex
OBJECT-TYPE
Beacon Quality Index for one minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.1.1.9INTEGER (0..100)read-onlycurrent
lqiLowBeaconPercent
OBJECT-TYPE
Received beacon percentage for one minute interval
1.3.6.1.4.1.161.19.3.1.13.1.1.10INTEGER (0..100)read-onlycurrent
lqiLowReRegQualityIndex
OBJECT-TYPE
Beacon Quality Index for one minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.1.1.11INTEGER (0..100)read-onlycurrent
lqiLowReRegCount
OBJECT-TYPE
Re Registration count for one minute interval
1.3.6.1.4.1.161.19.3.1.13.1.1.12INTEGER (0..100)read-onlycurrent
whispApsLQIMidInterval
OBJECT-TYPE
Link Quality Indicator five minutes interval table.
1.3.6.1.4.1.161.19.3.1.13.2not-accessiblecurrent
whispApsLQIMidIntervalEntry
OBJECT-TYPE
Link Quality Indicator for five minutes interval entry.
1.3.6.1.4.1.161.19.3.1.13.2.1not-accessiblecurrent
lqiMidLinkLUID
OBJECT-TYPE
Logical User Identfication (LUID) number
1.3.6.1.4.1.161.19.3.1.13.2.1.1INTEGER (2..239)read-onlycurrent
lqiMidLQI
OBJECT-TYPE
Link Quality Indicator for five minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-registrations and beacon percentage.
1.3.6.1.4.1.161.19.3.1.13.2.1.2INTEGER (0..100)read-onlycurrent
lqiMidDownlinkQualityIndex
OBJECT-TYPE
Downlink Quality Index for five minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.2.1.3INTEGER (0..100)read-onlycurrent
lqiMidDownlinkAverageActualRate
OBJECT-TYPE
Downlink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X
1.3.6.1.4.1.161.19.3.1.13.2.1.4INTEGER (0..80)read-onlycurrent
lqiMidDownlinkExpectedRate
OBJECT-TYPE
Downlink Expected Rate in tenths for five minute interval. eg: 80 is 8X
1.3.6.1.4.1.161.19.3.1.13.2.1.5INTEGER (0..80)read-onlycurrent
lqiMidUplinkQualityIndex
OBJECT-TYPE
Uplink Quality Index for five minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.2.1.6INTEGER (0..100)read-onlycurrent
lqiMidUplinkAverageActualRate
OBJECT-TYPE
Uplink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X
1.3.6.1.4.1.161.19.3.1.13.2.1.7INTEGER (0..80)read-onlycurrent
lqiMidUplinkExpectedRate
OBJECT-TYPE
Uplink Expected Rate in tenths for five minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference.
1.3.6.1.4.1.161.19.3.1.13.2.1.8INTEGER (0..80)read-onlycurrent
lqiMidBeaconPercent
OBJECT-TYPE
Received beacon percent for five minute interval
1.3.6.1.4.1.161.19.3.1.13.2.1.9INTEGER (0..100)read-onlycurrent
lqiMidBeaconQualityIndex
OBJECT-TYPE
Beacon Quality Index for five minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.2.1.10INTEGER (0..100)read-onlycurrent
lqiMidReRegCount
OBJECT-TYPE
Re Registration count for five minute interval
1.3.6.1.4.1.161.19.3.1.13.2.1.11INTEGER (0..100)read-onlycurrent
lqiMidReRegQualityIndex
OBJECT-TYPE
Beacon Quality Index for five minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.2.1.12INTEGER (0..100)read-onlycurrent
whispApsLQIHighInterval
OBJECT-TYPE
Link Quality Indicator fifteen minutes interval table.
1.3.6.1.4.1.161.19.3.1.13.3not-accessiblecurrent
whispApsLQIHighIntervalEntry
OBJECT-TYPE
Link Quality Indicator for fifteen minutes interval entry.
1.3.6.1.4.1.161.19.3.1.13.3.1not-accessiblecurrent
lqiHighLinkLUID
OBJECT-TYPE
Logical User Identfication (LUID) number
1.3.6.1.4.1.161.19.3.1.13.3.1.1INTEGER (2..239)read-onlycurrent
lqiHighLQI
OBJECT-TYPE
Link Quality Indicator for fifteen minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-registrations and beacon percentage.
1.3.6.1.4.1.161.19.3.1.13.3.1.2INTEGER (0..100)read-onlycurrent
lqiHighDownlinkQualityIndex
OBJECT-TYPE
Downlink Quality Index for fifteen minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.3.1.3INTEGER (0..100)read-onlycurrent
lqiHighDownlinkAverageActualRate
OBJECT-TYPE
Downlink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X
1.3.6.1.4.1.161.19.3.1.13.3.1.4INTEGER (0..80)read-onlycurrent
lqiHighDownlinkExpectedRate
OBJECT-TYPE
Downlink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference.
1.3.6.1.4.1.161.19.3.1.13.3.1.5INTEGER (0..80)read-onlycurrent
lqiHighUplinkQualityIndex
OBJECT-TYPE
Uplink Quality Index for fifteen minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.3.1.6INTEGER (0..100)read-onlycurrent
lqiHighUplinkAverageActualRate
OBJECT-TYPE
Uplink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X
1.3.6.1.4.1.161.19.3.1.13.3.1.7INTEGER (0..80)read-onlycurrent
lqiHighUplinkExpectedRate
OBJECT-TYPE
Uplink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference.
1.3.6.1.4.1.161.19.3.1.13.3.1.8INTEGER (0..80)read-onlycurrent
lqiHighBeaconQualityIndex
OBJECT-TYPE
Beacon Quality Index for fifteen minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.3.1.9INTEGER (0..100)read-onlycurrent
lqiHighBeaconPercent
OBJECT-TYPE
Received beacon percent for fifteen minute interval
1.3.6.1.4.1.161.19.3.1.13.3.1.10INTEGER (0..100)read-onlycurrent
lqiHighReRegQualityIndex
OBJECT-TYPE
Beacon Quality Index for fifteen minute interval in percentage. 100% is best quality
1.3.6.1.4.1.161.19.3.1.13.3.1.11INTEGER (0..100)read-onlycurrent
lqiHighReRegCount
OBJECT-TYPE
Re Registration count for fifteen minute interval
1.3.6.1.4.1.161.19.3.1.13.3.1.12INTEGER (0..100)read-onlycurrent

Notifications

NameOIDStatus
whispRegComplete
NOTIFICATION-TYPE
Signals registration complete.
1.3.6.1.4.1.161.19.3.1.5.1.1current
whispRegLost
NOTIFICATION-TYPE
Signals registration lost.
1.3.6.1.4.1.161.19.3.1.5.1.2current
whispRegFailure
NOTIFICATION-TYPE
Signals a registration failure has occured.
1.3.6.1.4.1.161.19.3.1.5.1.3current
whispDefKeyUsed
NOTIFICATION-TYPE
Signals Default Key used for encryptiont.
1.3.6.1.4.1.161.19.3.1.5.1.4current
whispGPSInSync
NOTIFICATION-TYPE
Signals a transition from not-synchronized to synchronized.
1.3.6.1.4.1.161.19.3.1.5.2.1current
whispGPSOutSync
NOTIFICATION-TYPE
Signals a transition from synchronized to not-synchronized.
1.3.6.1.4.1.161.19.3.1.5.2.2current
whispRadarDetected
NOTIFICATION-TYPE
Radar detected transmit stopped.
1.3.6.1.4.1.161.19.3.1.5.3.1current
whispRadarEnd
NOTIFICATION-TYPE
Radar ended back to normal transmit.
1.3.6.1.4.1.161.19.3.1.5.3.2current
regulatoryApCheckInvalidChanFailed
NOTIFICATION-TYPE
Regulatory Check failed for the unit due to a invalid channel for the configured region. regulatoryStatus - Text description for the failure. physAddress - the MAC address of the unit.
1.3.6.1.4.1.161.19.3.1.5.4.1current
regulatoryCheckFailedNoRegionAp
NOTIFICATION-TYPE
Regulatory Check failed because a valid region has not be configured. physAddress - the MAC address of the unit.
1.3.6.1.4.1.161.19.3.1.5.4.2current
regulatoryApCheckInvalidChBwFailed
NOTIFICATION-TYPE
Regulatory Check failed due to an invalid channel bandwidth for the configured region. regulatoryStatus - Text description for the failure. physAddress - the MAC address of the unit.
1.3.6.1.4.1.161.19.3.1.5.4.3current
rfLinkOverloadCondition
NOTIFICATION-TYPE
AP has exceeded the preset discard percentage in the RF Downlink Direction. rfOutDiscardRate - Current discard Rate. physAddress - the MAC address of the unit.
1.3.6.1.4.1.161.19.3.1.5.5.1current
mumimoTrialEvent
NOTIFICATION-TYPE
MU-MIMO Trial Event Notification. Value indicates percentage of trial licenses remaining.
1.3.6.1.4.1.161.19.3.1.5.6.1current

Conformance

NameOIDStatus
whispLinkTestGroup
OBJECT-GROUP
WHiSP APs link test group.
1.3.6.1.4.1.161.19.3.1.6.1current
whispApsConfigGroup
OBJECT-GROUP
WHiSP APs configuration group.
1.3.6.1.4.1.161.19.3.1.6.2current
whispApsLinkTableGroup
OBJECT-GROUP
WHiSP APs Link Table group.
1.3.6.1.4.1.161.19.3.1.6.3current
whispApsNotifGroup
NOTIFICATION-GROUP
WHiSP APs notification group.
1.3.6.1.4.1.161.19.3.1.6.4current
whispApsFailedRegTableGroup
OBJECT-GROUP
WHiSP APs Failed Registration Table group.
1.3.6.1.4.1.161.19.3.1.6.5current
whispApsFrUtlStatsIntervalLowGroup
OBJECT-GROUP
WHiSP APs Frame Utilization Statistics group for interval of 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.6.7current
whispApsFrUtlStatsIntervalMediumGroup
OBJECT-GROUP
WHiSP APs Frame Utilization Statistics group for interval of 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.6.8current
whispApsFrUtlStatsIntervalHighGroup
OBJECT-GROUP
WHiSP APs Frame Utilization Statistics group for interval of 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
1.3.6.1.4.1.161.19.3.1.6.9current