MIBs Depot

SW-MIB

Registered at
1.3.6.1.4.1.1588.2.1.1.1
1.3.6.1.4.1.1588.2.1.1.2
1.3.6.1.4.1.1588.2.1.1.3
1.3.6.1.4.1.1588.2.1.1.4
1.3.6.1.4.1.1588.3.1.3
Last updated
2004-08-06 18:30
Organization
Brocade Communications Systems, Inc.,
Revisions
2003-01-13 14:30, 2003-07-20 14:30, 2004-04-15 10:30, 2004-08-06 18:30, 2005-04-29 20:16, 2006-01-09 09:00, 2006-05-17 09:00, 2007-01-23 09:00, 2007-06-08 12:00, 2007-06-27 10:30, 2007-08-01 12:20, 2007-08-29 04:42, 2008-01-29 07:59, 2008-07-17 03:45, 2008-07-24 02:32, 2008-07-25 02:32, 2008-09-09 09:00, 2009-09-28 09:00, 2009-02-21 09:00, 2009-03-30 09:00, 2009-06-25 12:00, 2009-06-29 01:00, 2009-06-30 13:06, 2009-06-30 06:00, 2009-10-30 05:00, 2009-11-03 13:06, 2009-11-05 12:00, 2009-11-05 05:00, 2009-11-06 11:30, 1909-11-30 10:30, 1909-12-03 17:30, 1910-01-30 17:30
Namespace
extreme
Source file
SW-MIB
Digest
sha256:3cbd9c6b1a74ad6f1609c3557f9ac4d817891f28f86d0ae39a832a91392f1e14

Description

The MIB module is for Brocade's Fibre Channel Switch. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved.

Contact

Customer Support Group Brocade Communications Systems, 1745 Technology Drive, San Jose, CA 95110 U.S.A Tel: +1-408-392-6061 Fax: +1-408-392-6656 Email: support@Brocade.COM WEB: www.brocade.com

Imports

FromSymbols
Brocade-REG-MIBbcsiModules, fcSwitch
Brocade-TCFcWwn, SwDomainIndex, SwNbIndex, SwPortIndex, SwSensorIndex, SwTrunkMaster
FCMGMT-MIBconnUnitPortStatEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

Brocade-REG-MIB
Brocade-TC
FCMGMT-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
SW-MIB

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.1588.2.1.1.1.1swSystemBROCADE-SYSTEM-MIB
1.3.6.1.4.1.1588.2.1.1.1.28faExtFA-EXT-MIB

Textual conventions

NameOIDSyntaxAccessStatus
FcPortFlag
TEXTUAL-CONVENTION
Represents the port status for a FC Flag. Currently this will indicate if the port is virtual or physical.
current
SwFwActs
type
SwFwBehavior
type
SwFwClassesAreas
type
SwFwEvent
type
SwFwLevels
type
SwFwLicense
type
SwFwState
type
SwFwStatus
type
SwFwTimebase
type
SwFwWriteVals
type
SwSevType
TEXTUAL-CONVENTION
The event trap level in conjunction with the an event's severity level.
current

Objects

NameOIDSyntaxAccessStatus
sw
OBJECT-IDENTITY
The OID sub-tree for Brocade's Silkworm Series of Fibre Channel Switches.
1.3.6.1.4.1.1588.2.1.1.1current
swTrapsV2
OBJECT-IDENTITY
The Traps for Brocade's Fibre Channel Switch.
1.3.6.1.4.1.1588.2.1.1.1.0current
swSystem
OBJECT-IDENTITY
The OID sub-tree for swSystem group.
1.3.6.1.4.1.1588.2.1.1.1.1current
swCurrentDate
OBJECT-TYPE
The current date information in displayable textual format.
1.3.6.1.4.1.1588.2.1.1.1.1.1DisplayString (SIZE(0..64))read-onlycurrent
swBootDate
OBJECT-TYPE
The date and time when the system last booted, in displayable textual format.
1.3.6.1.4.1.1588.2.1.1.1.1.2DisplayString (SIZE(0..64))read-onlycurrent
swFWLastUpdated
OBJECT-TYPE
The information indicates the date when the firmware was last updated, in displayable textual format.
1.3.6.1.4.1.1588.2.1.1.1.1.3DisplayString (SIZE(0..64))read-onlycurrent
swFlashLastUpdated
OBJECT-TYPE
The information indicates the date when the FLASH was last updated, in displayable textual format.
1.3.6.1.4.1.1588.2.1.1.1.1.4DisplayString (SIZE(0..64))read-onlycurrent
swBootPromLastUpdated
OBJECT-TYPE
The information indicates the date when the boot PROM was last updated, in displayable textual format.
1.3.6.1.4.1.1588.2.1.1.1.1.5DisplayString (SIZE(0..64))read-onlycurrent
swFirmwareVersion
OBJECT-TYPE
The current version of the firwmare.
1.3.6.1.4.1.1588.2.1.1.1.1.6DisplayString (SIZE(0..24))read-onlycurrent
swOperStatus
OBJECT-TYPE
The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external Fibre Channel port; o offline(2) means the switch is not accessible; o testing(3) means the switch is in a built-in test mode and is not accessible by an external Fibre Channel port; o faulty(4) means the switch is not operational.
1.3.6.1.4.1.1588.2.1.1.1.1.7INTEGER {online(1), offline(2), testing(3), faulty(4)}read-onlycurrent
swAdmStatus
OBJECT-TYPE
The desired administrative status of the switch. A management station may place the switch in a desired state by setting this object accordingly. The states are as follow: o online(1) means set the switch to be accessible by an external Fibre Channel port; o offline(2) means set the switch to be inaccessible; o testing(3) means set the switch to run the built-in test; o faulty(4) means set the switch to a 'soft' faulty condition; o reboot(5) means set the switch to reboot in 1 second. o fastboot(6) means set the switch to fastboot in 1 second. Fastboot would cause the switch to boot but skip over the POST. When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot.
1.3.6.1.4.1.1588.2.1.1.1.1.8INTEGER {online(1), offline(2), testing(3), faulty(4), reboot(5), fastboot(6)}read-writecurrent
swTelnetShellAdmStatus
OBJECT-TYPE
The desired administrative status of the Telnet shell. By setting it to terminated(1), the current Telnet shell task is deleted. When this variable instance is read, it reports the value last set through SNMP.
1.3.6.1.4.1.1588.2.1.1.1.1.9INTEGER {unknown(0), terminated(1)}read-writecurrent
swSsn
OBJECT-TYPE
The soft serial number of the switch.
1.3.6.1.4.1.1588.2.1.1.1.1.10DisplayString (SIZE(0..128))read-onlycurrent
swFlashDLOperStatus
OBJECT-TYPE
The operational status of the FLASH. The operational states are as follow: o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgraded(2) state indicates that it contains the image upgraded from the swFlashDLHost.0.; o swCfUploaded(3) state indicates that the switch configuration file has been uploaded to the host; and o swCfDownloaded(4) state indicates that the switch configuration file has been downloaded from the host. o swFwCorrupted (5) state indicates that the firmware in the FLASH of the switch is corrupted.
1.3.6.1.4.1.1588.2.1.1.1.1.11INTEGER {unknown(0), swCurrent(1), swFwUpgraded(2), swCfUploaded(3), swCfDownloaded(4), swFwCorrupted(5)}read-onlycurrent
swFlashDLAdmStatus
OBJECT-TYPE
The desired state of the FLASH. A management station may place the FLASH in a desired state by setting this object accordingly: o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgrade(2) means that the firmware in the FLASH is to be upgraded from the host specified; o swCfUpload(3) means that the switch config file is to be uploaded to the host specified; or o swCfDownload(4) means that the switch config file is to be downloaded from the host specified. o swFwCorrupted(5) state indicates that the firmware in the FLASH is corrupted. This value is for informational purpose only. However, set of swFlashDLAdmStatus to this value is not allowed. The host is specified in swFlashDLHost.0. In addition, user name is specified in swFlashDLUser.0, and the file name specified in swFlashDLFile.0. Reference the user manual on the following commands, o firmwareDownload, o configUpload, and o configDownload.
1.3.6.1.4.1.1588.2.1.1.1.1.12INTEGER {swCurrent(1), swFwUpgrade(2), swCfUpload(3), swCfDownload(4), swFwCorrupted(5)}read-writecurrent
swFlashDLHost
OBJECT-TYPE
The name or IP address (in dot notation) of the host to download or upload a relevant file to the FLASH.
1.3.6.1.4.1.1588.2.1.1.1.1.13DisplayString (SIZE(0..64))read-writecurrent
swFlashDLUser
OBJECT-TYPE
The user name on the host to download or upload a relevant file to or from the FLASH.
1.3.6.1.4.1.1588.2.1.1.1.1.14DisplayString (SIZE(0..64))read-writecurrent
swFlashDLFile
OBJECT-TYPE
The name of the file to be downloaded or uploaded.
1.3.6.1.4.1.1588.2.1.1.1.1.15DisplayStringread-writecurrent
swFlashDLPassword
OBJECT-TYPE
The password to be used in for FTP transfer of files in the download or upload operation.
1.3.6.1.4.1.1588.2.1.1.1.1.16DisplayString (SIZE(0..100))read-writecurrent
swBeaconOperStatus
OBJECT-TYPE
The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is off, each LED will be in their its regular status indicating color and state.
1.3.6.1.4.1.1588.2.1.1.1.1.18INTEGER {on(1), off(2)}read-onlycurrent
swBeaconAdmStatus
OBJECT-TYPE
The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is set to off, each LED will be in its regular status indicating color and state.
1.3.6.1.4.1.1588.2.1.1.1.1.19INTEGER {on(1), off(2)}read-writecurrent
swDiagResult
OBJECT-TYPE
The result of the power-on startup (POST) diagnostics.
1.3.6.1.4.1.1588.2.1.1.1.1.20INTEGER {sw-ok(1), sw-faulty(2), sw-embedded-port-fault(3)}read-onlycurrent
swNumSensors
OBJECT-TYPE
The number of sensors inside the switch.
1.3.6.1.4.1.1588.2.1.1.1.1.21Integer32 (0..2147483647)read-onlycurrent
swSensorTable
OBJECT-TYPE
The table of sensor entries.
1.3.6.1.4.1.1588.2.1.1.1.1.22not-accessiblecurrent
swSensorEntry
OBJECT-TYPE
An entry of the sensor information.
1.3.6.1.4.1.1588.2.1.1.1.1.22.1not-accessiblecurrent
swSensorIndex
OBJECT-TYPE
This object identifies the sensor.
1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1SwSensorIndexread-onlycurrent
swSensorType
OBJECT-TYPE
This object identifies the sensor type.
1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2INTEGER {temperature(1), fan(2), power-supply(3)}read-onlycurrent
swSensorStatus
OBJECT-TYPE
The current status of the sensor.
1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3INTEGER {unknown(1), faulty(2), below-min(3), nominal(4), above-max(5), absent(6)}read-onlycurrent
swSensorValue
OBJECT-TYPE
The current value (reading) of the sensor. The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability to measure the actual value. In V2.0, the temperature sensor value will be in Celsius; the fan value will be in RPM (revolution per minute); and the power supply sensor reading will be unknown.
1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4Integer32read-onlycurrent
swSensorInfo
OBJECT-TYPE
Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'.
1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5DisplayString (SIZE(0..255))read-onlycurrent
swTrackChangesInfo
OBJECT-TYPE
Track changes string. For trap only
1.3.6.1.4.1.1588.2.1.1.1.1.23DisplayStringread-onlycurrent
swID
OBJECT-TYPE
The number of the logical switch (0/1)
1.3.6.1.4.1.1588.2.1.1.1.1.24Integer32read-onlycurrent
swEtherIPAddress
OBJECT-TYPE
The IP Address of the Ethernet interface of this logical switch.
1.3.6.1.4.1.1588.2.1.1.1.1.25IpAddressread-onlycurrent
swEtherIPMask
OBJECT-TYPE
The IP Mask of the Ethernet interface of this logical switch.
1.3.6.1.4.1.1588.2.1.1.1.1.26IpAddressread-onlycurrent
swFCIPAddress
OBJECT-TYPE
The IP Address of the FC interface of this logical switch.
1.3.6.1.4.1.1588.2.1.1.1.1.27IpAddressread-onlycurrent
swFCIPMask
OBJECT-TYPE
The IP Mask of the FC interface of this logical switch.
1.3.6.1.4.1.1588.2.1.1.1.1.28IpAddressread-onlycurrent
swIPv6Address
OBJECT-TYPE
IPV6 address.
1.3.6.1.4.1.1588.2.1.1.1.1.29DisplayStringnot-accessiblecurrent
swIPv6Status
OBJECT-TYPE
The current status of ipv6 address.
1.3.6.1.4.1.1588.2.1.1.1.1.30INTEGER {tentative(1), preferred(2), ipdeprecated(3), inactive(4)}not-accessiblecurrent
swModel
OBJECT-TYPE
Indicates whether the switch is 7500 or 7500E .
1.3.6.1.4.1.1588.2.1.1.1.1.31INTEGER {switch7500(1), switch7500E(2), other(3)}read-onlycurrent
swTestString
OBJECT-TYPE
presence of this string represents test trap.
1.3.6.1.4.1.1588.2.1.1.1.1.32DisplayString (SIZE(1..255))not-accessiblecurrent
swFabric
OBJECT-IDENTITY
The OID sub-tree for swFabric group.
1.3.6.1.4.1.1588.2.1.1.1.2current
swDomainID
OBJECT-TYPE
The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state.
1.3.6.1.4.1.1588.2.1.1.1.2.1SwDomainIndexread-writecurrent
swPrincipalSwitch
OBJECT-TYPE
This object indicates whether the switch is the Principal switch as per FC-SW.
1.3.6.1.4.1.1588.2.1.1.1.2.2INTEGER {yes(1), no(2)}read-onlycurrent
swNumNbs
OBJECT-TYPE
The number of Inter-Switch Links in the (immediate) neighborhood.
1.3.6.1.4.1.1588.2.1.1.1.2.8Integer32 (0..2147483647)read-onlycurrent
swNbTable
OBJECT-TYPE
This table contains the ISLs in the immediate neighborhood of the switch.
1.3.6.1.4.1.1588.2.1.1.1.2.9not-accessiblecurrent
swNbEntry
OBJECT-TYPE
An entry containing each neighbor ISL parameters.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1not-accessiblecurrent
swNbIndex
OBJECT-TYPE
This object identifies the neighbor ISL entry.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1SwNbIndexread-onlycurrent
swNbMyPort
OBJECT-TYPE
This is the port that has an ISL to another switch.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2SwPortIndexread-onlycurrent
swNbRemDomain
OBJECT-TYPE
This is the Fibre Channel domain on the other end of the ISL.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3SwDomainIndexread-onlycurrent
swNbRemPort
OBJECT-TYPE
This is the port index on the other end of the ISL.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4SwPortIndexread-onlycurrent
swNbBaudRate
OBJECT-TYPE
The baud rate of the ISL.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5INTEGER {other(1), oneEighth(2), quarter(4), half(8), full(16), double(32), quadruple(64), octuple(128), decuple(256)}read-onlycurrent
swNbIslState
OBJECT-TYPE
The current state of the ISL. The swNbIslState will be 0 when ISL is in incompatible state or port is a slave port.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.6INTEGER {sw-down(0), sw-init(1), sw-internal2(2), sw-internal3(3), sw-internal4(4), sw-active(5)}read-onlycurrent
swNbIslCost
OBJECT-TYPE
The current link cost of the ISL.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.7Integer32 (0..2147483647)read-writecurrent
swNbRemPortName
OBJECT-TYPE
The World_wide_Name of the remote port.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8OCTET STRING (SIZE(8))read-onlycurrent
swFabricMemTable
OBJECT-TYPE
This table contains information on the member switches of a fabric. This may not be available on all versions of Fabric OS.
1.3.6.1.4.1.1588.2.1.1.1.2.10not-accessiblecurrent
swFabricMemEntry
OBJECT-TYPE
An entry containing each switch in the fabric.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1not-accessiblecurrent
swFabricMemWwn
OBJECT-TYPE
This object identifies the World wide name of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1FcWwnread-onlycurrent
swFabricMemDid
OBJECT-TYPE
This object identifies the domain id of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2SwDomainIndexread-onlycurrent
swFabricMemName
OBJECT-TYPE
This object identifies the name of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3DisplayString (SIZE(0..255))read-onlycurrent
swFabricMemEIP
OBJECT-TYPE
This object identifies the ethernet IP address of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4IpAddressread-onlycurrent
swFabricMemFCIP
OBJECT-TYPE
This object identifies the Fibre Channel IP address of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.5IpAddressread-onlycurrent
swFabricMemGWIP
OBJECT-TYPE
This object identifies the Gateway IP address of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.6IpAddressread-onlycurrent
swFabricMemType
OBJECT-TYPE
This object identifies the member switch type.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.7Integer32 (0..2147483647)read-onlycurrent
swFabricMemShortVersion
OBJECT-TYPE
This object identifies Fabric OS version of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8OCTET STRING (SIZE(0..24))read-onlycurrent
swIDIDMode
OBJECT-TYPE
Status of Insistent Domain ID (IDID) mode. Status indicating IDID mode is enabled or not.
1.3.6.1.4.1.1588.2.1.1.1.2.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
swPmgrEventType
OBJECT-TYPE
Indicates Partition manager event type.
1.3.6.1.4.1.1588.2.1.1.1.2.12INTEGER {create(0), delete(1), moveport(2), fidchange(3), basechange(4), vfstatechange(6)}not-accessiblecurrent
swPmgrEventTime
OBJECT-TYPE
This object identifies the date and time when this pmgr event occurred, in textual format.
1.3.6.1.4.1.1588.2.1.1.1.2.13DisplayString (SIZE(0..64))not-accessiblecurrent
swPmgrEventDescr
OBJECT-TYPE
This object identifies the textual description of the pmgr event.
1.3.6.1.4.1.1588.2.1.1.1.2.14DisplayString (SIZE(0..64))not-accessiblecurrent
swVfId
OBJECT-TYPE
The Virtual fabric id.
1.3.6.1.4.1.1588.2.1.1.1.2.15Integer32 (0..255)read-onlycurrent
swModule
OBJECT-IDENTITY
The OID sub-tree for swModule group.
1.3.6.1.4.1.1588.2.1.1.1.3current
swAgtCfg
OBJECT-IDENTITY
The OID sub-tree for swAgtCfg group.
1.3.6.1.4.1.1588.2.1.1.1.4current
swAgtCmtyTable
OBJECT-TYPE
A table that contains, one entry for each Community, the access control and parameters of the Community.
1.3.6.1.4.1.1588.2.1.1.1.4.11not-accessiblecurrent
swAgtCmtyEntry
OBJECT-TYPE
An entry containing the Community parameters.
1.3.6.1.4.1.1588.2.1.1.1.4.11.1not-accessiblecurrent
swAgtCmtyIdx
OBJECT-TYPE
This object identifies the SNMPv1 Community entry.
1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1Integer32 (1..6)read-onlycurrent
swAgtCmtyStr
OBJECT-TYPE
This is a Community string supported by the agent. If a new value is set successfully, it takes effect immediately.
1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2DisplayString (SIZE(2..16))read-writecurrent
swAgtTrapRcp
OBJECT-TYPE
This is the trap recipient associated with the Community. If a new value is set successfully, it takes effect immediately.
1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3IpAddressread-writecurrent
swAgtTrapSeverityLevel
OBJECT-TYPE
This is the trap severity level associated with the swAgtTrapRcp. The trap severity level in conjunction with the an event's severity level. When an event occurs and if its severity level is at or below the set value, the SNMP trap is sent to configured trap recipients. The severity level is limited to particular events. If a new value is set successfully, it takes effect immediately.
1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4SwSevTyperead-writecurrent
swFCport
OBJECT-IDENTITY
The OID sub-tree for swFCport group.
1.3.6.1.4.1.1588.2.1.1.1.6current
swFCPortCapacity
OBJECT-TYPE
The maximum number of Fibre Channel ports on this switch. It includes G_Port, F_Port, FL_Port and any other types of Fibre Channel port.
1.3.6.1.4.1.1588.2.1.1.1.6.1Integer32 (0..2147483647)read-onlycurrent
swFCPortTable
OBJECT-TYPE
A table that contains, one entry for each switch port, configuration and service parameters of the port.
1.3.6.1.4.1.1588.2.1.1.1.6.2not-accessiblecurrent
swFCPortEntry
OBJECT-TYPE
An entry containing the configuration and service parameters of the switch port.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1not-accessiblecurrent
swFCPortIndex
OBJECT-TYPE
This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the front panel. E.g. port index 1 correspond to port number 0.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1SwPortIndexread-onlycurrent
swFCPortType
OBJECT-TYPE
This object identifies the type of switch port. It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6).
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2INTEGER {stitch(1), flannel(2), loom(3), bloom(4), rdbloom(5), wormhole(6), other(7), unknown(8)}read-onlycurrent
swFCPortPhyState
OBJECT-TYPE
This object identifies the physical state of the port: noCard(1) no card present in this switch slot; noTransceiver(2) no Transceiver module in this port. noGbic(2) was used previously. Transceiver is the generic name for GBIC, SFP etc.; laserFault(3) the module is signaling a laser fault (defective Transceiver); noLight(4) the module is not receiving light; noSync(5) the module is receiving light but is out of sync; inSync(6) the module is receiving light and is in sync; portFault(7) the port is marked faulty (defective Transceiver, cable or device); diagFault(8) the port failed diagnostics (defective G_Port or FL_Port card or motherboard); lockRef(9) the port is locking to the reference signal. validating(10) Validation is in progress invalidModule(11) Invalid SFP unknown(255) unknown.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3INTEGER {noCard(1), noTransceiver(2), laserFault(3), noLight(4), noSync(5), inSync(6), portFault(7), diagFault(8), lockRef(9), validating(10), invalidModule(11), unknown(255)}read-onlycurrent
swFCPortOpStatus
OBJECT-TYPE
This object identifies the operational status of the port. The online(1) state indicates that user frames can be passed. The unknown(0) state indicates that likely the port module is physically absent (see swFCPortPhyState).
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4INTEGER {unknown(0), online(1), offline(2), testing(3), faulty(4)}read-onlycurrent
swFCPortAdmStatus
OBJECT-TYPE
The desired state of the port. A management station may place the port in a desired state by setting this object accordingly. The testing(3) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the switch, swFCPortAdmStatus is then changed to either the online(1) or testing(3) states, or remains in the offline(2) state.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5INTEGER {online(1), offline(2), testing(3), faulty(4)}read-writecurrent
swFCPortLinkState
OBJECT-TYPE
This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in a FC-AL loop); disabled(2) - the port is not allowed to participate in the FC-PH protocol with its attached port(s); loopback(3) - the port may transmit frames through an internal path to verify the health of the transmitter and receiver path. Note that when the port's link state changes, its operational status (swFCPortOpStatus) will be affected.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6INTEGER {enabled(1), disabled(2), loopback(3)}read-writecurrent
swFCPortTxType
OBJECT-TYPE
This object indicates the media transmitter type of the port. The value may be: unknown(1) cannot determined to the port driver lw(2) long wave laser sw(3) short wave laser ld(4) long wave LED cu(5) copper (electrical).
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7INTEGER {unknown(1), lw(2), sw(3), ld(4), cu(5)}read-onlycurrent
swFCPortTxWords
OBJECT-TYPE
This object counts the number of Fibre Channel words that the port has transmitted.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11Counter32read-onlycurrent
swFCPortRxWords
OBJECT-TYPE
This object counts the number of Fibre Channel words that the port has received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12Counter32read-onlycurrent
swFCPortTxFrames
OBJECT-TYPE
This object counts the number of (Fibre Channel) frames that the port has transmitted.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13Counter32read-onlycurrent
swFCPortRxFrames
OBJECT-TYPE
This object counts the number of (Fibre Channel) frames that the port has received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14Counter32read-onlycurrent
swFCPortRxC2Frames
OBJECT-TYPE
This object counts the number of Class 2 frames that the port has received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15Counter32read-onlycurrent
swFCPortRxC3Frames
OBJECT-TYPE
This object counts the number of Class 3 frames that the port has received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16Counter32read-onlycurrent
swFCPortRxLCs
OBJECT-TYPE
This object counts the number of Link Control frames that the port has received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17Counter32read-onlycurrent
swFCPortRxMcasts
OBJECT-TYPE
This object counts the number of Multicast frames that the port has received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18Counter32read-onlycurrent
swFCPortTooManyRdys
OBJECT-TYPE
This object counts the number of times when RDYs exceeds the frames received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19Counter32read-onlycurrent
swFCPortNoTxCredits
OBJECT-TYPE
This object counts the number of times when the transmit credit has reached zero.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20Counter32read-onlycurrent
swFCPortRxEncInFrs
OBJECT-TYPE
This object counts the number of encoding error or disparity error inside frames received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21Counter32read-onlycurrent
swFCPortRxCrcs
OBJECT-TYPE
This object counts the number of CRC errors detected for frames received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22Counter32read-onlycurrent
swFCPortRxTruncs
OBJECT-TYPE
This object counts the number of truncated frames that the port has received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23Counter32read-onlycurrent
swFCPortRxTooLongs
OBJECT-TYPE
This object counts the number of received frames that are too long.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24Counter32read-onlycurrent
swFCPortRxBadEofs
OBJECT-TYPE
This object counts the number of received frames that have bad EOF delimiter.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25Counter32read-onlycurrent
swFCPortRxEncOutFrs
OBJECT-TYPE
This object counts the number of encoding error or disparity error outside frames received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26Counter32read-onlycurrent
swFCPortRxBadOs
OBJECT-TYPE
This object counts the number of invalid Ordered Sets received.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27Counter32read-onlycurrent
swFCPortC3Discards
OBJECT-TYPE
This object counts the number of Class 3 frames that the port has discarded.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28Counter32read-onlycurrent
swFCPortMcastTimedOuts
OBJECT-TYPE
This object counts the number of Multicast frames that has been timed out.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29Counter32read-onlycurrent
swFCPortTxMcasts
OBJECT-TYPE
This object counts the number of Multicast frames that has been transmitted.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30Counter32read-onlycurrent
swFCPortLipIns
OBJECT-TYPE
This object counts the number of Loop Initializations that has been initiated by loop devices attached.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31Counter32read-onlycurrent
swFCPortLipOuts
OBJECT-TYPE
This object counts the number of Loop Initializations that has been initiated by the port.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32Counter32read-onlycurrent
swFCPortLipLastAlpa
OBJECT-TYPE
This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33OCTET STRING (SIZE(4))read-onlycurrent
swFCPortWwn
OBJECT-TYPE
The World_wide_Name of the Fibre Channel port. The contents of an instance are in the IEEE extended format as specified in FC-PH; the 12-bit port identifier represents the port number within the switch.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34OCTET STRING (SIZE(8))read-onlycurrent
swFCPortSpeed
OBJECT-TYPE
The desired baud rate for the port. It can have the values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5), or 10GB (6). Some of the above values may not be supported by all type of switches.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35INTEGER {one-GB(1), two-GB(2), auto-Negotiate(3), four-GB(4), eight-GB(5), ten-GB(6), unknown(7)}read-writecurrent
swFCPortName
OBJECT-TYPE
A string indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36DisplayString (SIZE(0..32))read-onlycurrent
swFCPortSpecifier
OBJECT-TYPE
This string indicates the physical port number of the addressed port. The format of the string is: <slot>/port, where 'slot' being present only for bladed systems.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37DisplayStringread-onlycurrent
swFCPortFlag
OBJECT-TYPE
A bit map of port status flags which includes the information of port type. Currently this will indicate if the port is virtual or physical.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38FcPortFlagread-onlycurrent
swFCPortBrcdType
OBJECT-TYPE
The Brocade port type.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39INTEGER {unknown(1), other(2), fl-port(3), f-port(4), e-port(5), g-port(6), ex-port(7)}read-onlycurrent
swNs
OBJECT-IDENTITY
The OID sub-tree for swNs group.
1.3.6.1.4.1.1588.2.1.1.1.7current
swNsLocalNumEntry
OBJECT-TYPE
The number of local Name Server entries.
1.3.6.1.4.1.1588.2.1.1.1.7.1Integer32 (0..2147483647)read-onlycurrent
swNsLocalTable
OBJECT-TYPE
The table of local Name Server entries.
1.3.6.1.4.1.1588.2.1.1.1.7.2not-accessiblecurrent
swNsLocalEntry
OBJECT-TYPE
An entry of the local Name Server database.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1not-accessiblecurrent
swNsEntryIndex
OBJECT-TYPE
The object identifies the Name Server database entry.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1Integer32 (0..2147483647)read-onlycurrent
swNsPortID
OBJECT-TYPE
The object identifies the Fibre Channel port address ID of the entry.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2OCTET STRING (SIZE(4))read-onlycurrent
swNsPortType
OBJECT-TYPE
The object identifies the type of port: N_Port, NL_Port, etc., for this entry. The type is defined in FC-GS-2.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3INTEGER {nPort(1), nlPort(2)}read-onlycurrent
swNsPortName
OBJECT-TYPE
The object identifies the Fibre Channel World_wide Name of the port entry.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4FcWwnread-onlycurrent
swNsPortSymb
OBJECT-TYPE
The object identifies the contents of a Symbolic Name of the port entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 255 bytes, and the first byte of the array specifies the length of its 'contents'. This object variable corresponds to the 'contents' of the Symbolic Name, without the first byte.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5OCTET STRING (SIZE(0..255))read-onlycurrent
swNsNodeName
OBJECT-TYPE
The object identifies the Fibre Channel World_wide Name of the associated node as defined in FC-GS-2.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6FcWwnread-onlycurrent
swNsNodeSymb
OBJECT-TYPE
The object identifies the contents of a Symbolic Name of the the node associated with the entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 255 bytes, and the first byte of the array specifies the length of its 'contents'. This object variable corresponds to the 'contents' of the Symbolic Name, without the first byte (specifying the length).
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7OCTET STRING (SIZE(0..255))read-onlycurrent
swNsIPA
OBJECT-TYPE
The object identifies the Initial Process Associator of the node for the entry as defined in FC-GS-2.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.8OCTET STRING (SIZE(8))read-onlycurrent
swNsIpAddress
OBJECT-TYPE
The object identifies the IP address of the node for the entry as defined in FC-GS-2. The format of the address is in IPv6.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9OCTET STRING (SIZE(16))read-onlycurrent
swNsCos
OBJECT-TYPE
The object identifies the class of services supported by the port. The value is a bit-map defined as follows: o bit 0 is class F, o bit 1 is class 1, o bit 2 is class 2, o bit 3 is class 3, o bit 4 is class 4, etc.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10INTEGER {class-F(1), class-1(2), class-F-1(3), class-2(4), class-F-2(5), class-1-2(6), class-F-1-2(7), class-3(8), class-F-3(9), class-1-3(10), class-F-1-3(11), class-2-3(12), class-F-2-3(13), class-1-2-3(14), class-F-1-2-3(15)}read-onlycurrent
swNsFc4
OBJECT-TYPE
The object identifies the FC-4s supported by the port as defined in FC-GS-2.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11OCTET STRING (SIZE(32))read-onlycurrent
swNsIpNxPort
OBJECT-TYPE
The object identifies IpAddress of the Nx_port for the entry.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12OCTET STRING (SIZE(16))read-onlycurrent
swNsWwn
OBJECT-TYPE
The object identifies the World Wide Name (WWN) of the Fx_port for the entry.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13OCTET STRING (SIZE(8))read-onlycurrent
swNsHardAddr
OBJECT-TYPE
The object identifies the 24-bit hard address of the node for the entry.
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14OCTET STRING (SIZE(3))read-onlycurrent
swEvent
OBJECT-IDENTITY
The OID sub-tree for swEvent group.
1.3.6.1.4.1.1588.2.1.1.1.8current
swEventTrapLevel
OBJECT-TYPE
swAgtTrapSeverityLevel, in absence of swEventTrapLevel, specifies the Trap Severity Level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event's severity level. When an event occurs and if its severity level is at or below the value specified by this object instance, the agent will send the associated swEventTrap to configured recipients.
1.3.6.1.4.1.1588.2.1.1.1.8.1INTEGER {none(0), critical(1), error(2), warning(3), informational(4), debug(5)}read-writedeprecated
swEventNumEntries
OBJECT-TYPE
The number of entries in the Event Table.
1.3.6.1.4.1.1588.2.1.1.1.8.4Integer32 (0..2147483647)read-onlycurrent
swEventTable
OBJECT-TYPE
The table of event entries.
1.3.6.1.4.1.1588.2.1.1.1.8.5not-accessiblecurrent
swEventEntry
OBJECT-TYPE
An entry of the event table.
1.3.6.1.4.1.1588.2.1.1.1.8.5.1not-accessiblecurrent
swEventIndex
OBJECT-TYPE
This object identifies the event entry.
1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1Integer32 (0..2147483647)read-onlycurrent
swEventTimeInfo
OBJECT-TYPE
This object identifies the date and time when this event occurred, in textual format.
1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2DisplayString (SIZE(0..64))read-onlycurrent
swEventLevel
OBJECT-TYPE
This object identifies the severity level of this event entry.
1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3INTEGER {critical(1), error(2), warning(3), informational(4), debug(5)}read-onlycurrent
swEventRepeatCount
OBJECT-TYPE
This object identifies how many times this particular event has occurred.
1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4Integer32 (0..2147483647)read-onlycurrent
swEventDescr
OBJECT-TYPE
This object identifies the textual description of the event.
1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5DisplayStringread-onlycurrent
swEventVfId
OBJECT-TYPE
This object identifies the Virtual fabric id.
1.3.6.1.4.1.1588.2.1.1.1.8.5.1.6Integer32 (0..255)read-onlycurrent
swFwSystem
OBJECT-IDENTITY
The OID sub-tree for swFwSystem group.
1.3.6.1.4.1.1588.2.1.1.1.10current
swFwFabricWatchLicense
OBJECT-TYPE
tells if licensed or not.
1.3.6.1.4.1.1588.2.1.1.1.10.1SwFwLicenseread-onlycurrent
swFwClassAreaTable
OBJECT-TYPE
The table of classes and areas.
1.3.6.1.4.1.1588.2.1.1.1.10.2not-accessiblecurrent
swFwClassAreaEntry
OBJECT-TYPE
An entry of the classes and areas.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1not-accessiblecurrent
swFwClassAreaIndex
OBJECT-TYPE
This object identifies the class type.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1SwFwClassesAreasread-onlycurrent
swFwWriteThVals
OBJECT-TYPE
This object is set to apply the value changes.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2SwFwWriteValsread-writecurrent
swFwDefaultUnit
OBJECT-TYPE
A Default unit string name for a threshold area.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3DisplayStringread-onlycurrent
swFwDefaultTimebase
OBJECT-TYPE
A Default timebase for the current threshold counter.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4SwFwTimebaseread-onlycurrent
swFwDefaultLow
OBJECT-TYPE
A Default low threshold value.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5Integer32 (0..2147483647)read-onlycurrent
swFwDefaultHigh
OBJECT-TYPE
A Default high threshold value.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6Integer32 (0..2147483647)read-onlycurrent
swFwDefaultBufSize
OBJECT-TYPE
A Default buffer size value.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.7Integer32 (0..2147483647)read-onlycurrent
swFwCustUnit
OBJECT-TYPE
A custom unit string name for a threshold area.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.8DisplayStringread-onlycurrent
swFwCustTimebase
OBJECT-TYPE
A custom timebase for the current threshold counter.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9SwFwTimebaseread-writecurrent
swFwCustLow
OBJECT-TYPE
A custom low threshold value.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.10Integer32 (0..2147483647)read-writecurrent
swFwCustHigh
OBJECT-TYPE
A custom high threshold value.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11Integer32 (0..2147483647)read-writecurrent
swFwCustBufSize
OBJECT-TYPE
A custom buffer size value.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12Integer32 (0..2147483647)read-writecurrent
swFwThLevel
OBJECT-TYPE
A level where all the threshold values are set at.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13SwFwLevelsread-writecurrent
swFwWriteActVals
OBJECT-TYPE
This object is set to apply act value changes.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14SwFwWriteValsread-writecurrent
swFwDefaultChangedActs
OBJECT-TYPE
Default action matrix for changed event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15SwFwActsread-onlycurrent
swFwDefaultExceededActs
OBJECT-TYPE
Default action matrix for exceeded event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16SwFwActsread-onlycurrent
swFwDefaultBelowActs
OBJECT-TYPE
Default action matrix for below event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17SwFwActsread-onlycurrent
swFwDefaultAboveActs
OBJECT-TYPE
Default action matrix for above event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18SwFwActsread-onlycurrent
swFwDefaultInBetweenActs
OBJECT-TYPE
Default action matrix for in-between event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19SwFwActsread-onlycurrent
swFwCustChangedActs
OBJECT-TYPE
custom action matrix for changed event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20SwFwActsread-writecurrent
swFwCustExceededActs
OBJECT-TYPE
custom action matrix for exceeded event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21SwFwActsread-writecurrent
swFwCustBelowActs
OBJECT-TYPE
custom action matrix for below event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22SwFwActsread-writecurrent
swFwCustAboveActs
OBJECT-TYPE
custom action matrix for above event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23SwFwActsread-writecurrent
swFwCustInBetweenActs
OBJECT-TYPE
custom action matrix for in-between event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24SwFwActsread-writecurrent
swFwValidActs
OBJECT-TYPE
matrix of valid acts for an class/area.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25SwFwActsread-onlycurrent
swFwActLevel
OBJECT-TYPE
A level where all the actions are set at.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26SwFwLevelsread-writecurrent
swFwThresholdTable
OBJECT-TYPE
The table of individual thresholds.
1.3.6.1.4.1.1588.2.1.1.1.10.3not-accessiblecurrent
swFwThresholdEntry
OBJECT-TYPE
An entry of an individual threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1not-accessiblecurrent
swFwThresholdIndex
OBJECT-TYPE
This object identifies the element index of an threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1Integer32 (0..2147483647)read-onlycurrent
swFwStatus
OBJECT-TYPE
This object identifies if an threshold is enabled or disabled.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2SwFwStatusread-writecurrent
swFwName
OBJECT-TYPE
This object is a name of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3DisplayString (SIZE(0..32))read-onlycurrent
swFwLabel
OBJECT-TYPE
This object is a label of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4DisplayString (SIZE(0..70))read-onlycurrent
swFwCurVal
OBJECT-TYPE
This object is a current counter of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5Integer32 (0..2147483647)read-onlycurrent
swFwLastEvent
OBJECT-TYPE
This object is a last event type of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6SwFwEventread-onlycurrent
swFwLastEventVal
OBJECT-TYPE
This object is a last event value of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7Integer32 (0..2147483647)read-onlycurrent
swFwLastEventTime
OBJECT-TYPE
This object is a last event time of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8DisplayString (SIZE(0..32))read-onlycurrent
swFwLastState
OBJECT-TYPE
This object is a last event state of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9SwFwStateread-onlycurrent
swFwBehaviorType
OBJECT-TYPE
A behavior of which the thresholds generate event.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10SwFwBehaviorread-writecurrent
swFwBehaviorInt
OBJECT-TYPE
A integer of which the thresholds generate continuous event.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11Integer32 (0..2147483647)read-writecurrent
swFwLastSeverityLevel
OBJECT-TYPE
This object is a last event severity level of the threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.3.1.12SwSevTyperead-onlycurrent
swEndDevice
OBJECT-IDENTITY
The OID sub-tree for swEndDevice group.
1.3.6.1.4.1.1588.2.1.1.1.21current
swEndDeviceRlsTable
OBJECT-TYPE
The table of individual end devices' rls.
1.3.6.1.4.1.1588.2.1.1.1.21.1not-accessiblecurrent
swEndDeviceRlsEntry
OBJECT-TYPE
An entry of an individual end devices' rls.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1not-accessiblecurrent
swEndDevicePort
OBJECT-TYPE
This object identifies the port of the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1Integer32 (0..2147483647)not-accessiblecurrent
swEndDeviceAlpa
OBJECT-TYPE
This object identifies the alpa of the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2Integer32 (0..2147483647)not-accessiblecurrent
swEndDevicePortID
OBJECT-TYPE
The object identifies the Fibre Channel port address ID of the entry.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3OCTET STRING (SIZE(4))read-onlycurrent
swEndDeviceLinkFailure
OBJECT-TYPE
Link failure count for the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4Counter32read-onlycurrent
swEndDeviceSyncLoss
OBJECT-TYPE
Sync loss count for the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5Counter32read-onlycurrent
swEndDeviceSigLoss
OBJECT-TYPE
Sig loss count for the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6Counter32read-onlycurrent
swEndDeviceProtoErr
OBJECT-TYPE
Protocol err count for the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7Counter32read-onlycurrent
swEndDeviceInvalidWord
OBJECT-TYPE
Invalid word count for the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8Counter32read-onlycurrent
swEndDeviceInvalidCRC
OBJECT-TYPE
Invalid CRC count for the end device.
1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9Counter32read-onlycurrent
swGroup
OBJECT-IDENTITY
The OID sub-tree for swGroup group.
1.3.6.1.4.1.1588.2.1.1.1.22current
swGroupTable
OBJECT-TYPE
The table of groups. This may not be available on all versions of Fabric OS.
1.3.6.1.4.1.1588.2.1.1.1.22.1not-accessiblecurrent
swGroupEntry
OBJECT-TYPE
An entry of table of groups.
1.3.6.1.4.1.1588.2.1.1.1.22.1.1not-accessiblecurrent
swGroupIndex
OBJECT-TYPE
This object is the group index starting from 1.
1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1Integer32 (0..2147483647)read-onlycurrent
swGroupName
OBJECT-TYPE
This object identifies the name of the group.
1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2OCTET STRING (SIZE(0..32))read-onlycurrent
swGroupType
OBJECT-TYPE
This object identifies the type of the group.
1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3OCTET STRING (SIZE(0..15))read-onlycurrent
swGroupMemTable
OBJECT-TYPE
The table of members of all groups. This may not be available on all versions of Fabric OS.
1.3.6.1.4.1.1588.2.1.1.1.22.2not-accessiblecurrent
swGroupMemEntry
OBJECT-TYPE
An entry for a member of a group.
1.3.6.1.4.1.1588.2.1.1.1.22.2.1not-accessiblecurrent
swGroupId
OBJECT-TYPE
This object identifies the Group Id of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1Integer32 (0..2147483647)read-onlycurrent
swGroupMemWwn
OBJECT-TYPE
This object identifies the WWN of the member switch.
1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2FcWwnread-onlycurrent
swGroupMemPos
OBJECT-TYPE
This object identifies position of the member switch in the group. This is based on the order that the switches were added in the group.
1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3Integer32 (0..2147483647)read-onlycurrent
swBlmPerfMnt
OBJECT-IDENTITY
The OID sub-tree for swBlmPerfMnt (Bloom Performance Monitor) group.
1.3.6.1.4.1.1588.2.1.1.1.23current
swBlmPerfALPAMntTable
OBJECT-TYPE
ALPA monitoring counter Table.
1.3.6.1.4.1.1588.2.1.1.1.23.1not-accessiblecurrent
swBlmPerfALPAMntEntry
OBJECT-TYPE
ALPA monitoring counter for given ALPA.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1not-accessiblecurrent
swBlmPerfAlpaPort
OBJECT-TYPE
This Object identifies the port index of the switch.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1SwPortIndexread-onlycurrent
swBlmPerfAlpaIndx
OBJECT-TYPE
This Object identifies the ALPA index. There can be 126 ALPA values
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2Integer32 (1..126)read-onlycurrent
swBlmPerfAlpa
OBJECT-TYPE
This Object identifies the ALPA values. These values range between x'01' and x'EF'(1 to 239). ALPA value x'00' is reserved for FL_Port If Alpa device is invalid, then it will have -1 value.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3Integer32 (0..2147483647)read-onlycurrent
swBlmPerfAlpaCRCCnt
OBJECT-TYPE
Get CRC count for given ALPA and port. This monitoring provides information on the number of CRC errors occurred on the frames destined to each possible ALPA attached to a specific port.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4OCTET STRING (SIZE(8))read-onlycurrent
swBlmPerfEEMntTable
OBJECT-TYPE
End-to-End monitoring counter Table
1.3.6.1.4.1.1588.2.1.1.1.23.2not-accessiblecurrent
swBlmPerfEEMntEntry
OBJECT-TYPE
End-to-End monitoring counter for given port.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1not-accessiblecurrent
swBlmPerfEEPort
OBJECT-TYPE
This object identifies the port number of the switch.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1SwPortIndexread-onlycurrent
swBlmPerfEERefKey
OBJECT-TYPE
This object identifies the reference number of the counter. This reference is number assigned when a filter is created. In SNMP Index start one instead of 0, add one to actual ref key
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2Integer32 (1..8)read-onlycurrent
swBlmPerfEECRC
OBJECT-TYPE
Get End to End CRC error for the frames that matched the SID-DID pair.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3OCTET STRING (SIZE(8))read-onlycurrent
swBlmPerfEEFCWRx
OBJECT-TYPE
Get End to End count of Fibre Channel words (FCW), received by the port, that matched the SID-DID pair.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4OCTET STRING (SIZE(8))read-onlycurrent
swBlmPerfEEFCWTx
OBJECT-TYPE
Get End to End count of Fibre Channel words (FCW), transmitted by the port, that matched the SID-DID pair.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5OCTET STRING (SIZE(8))read-onlycurrent
swBlmPerfEESid
OBJECT-TYPE
Gets SID info by reference number. SID (Source Identifier) is a 3-byte field in the frame header used to indicate the address identifier of the N-Port from which the frame was sent.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6Integer32 (0..2147483647)read-onlycurrent
swBlmPerfEEDid
OBJECT-TYPE
Gets DID info by reference number. DID (Destination Identifier) is a 3-byte field in the frame header used to indicate the address identifier of the N-Port to which the frame was sent.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7Integer32 (0..2147483647)read-onlycurrent
swBlmPerfFltMntTable
OBJECT-TYPE
Filter based monitoring counter.
1.3.6.1.4.1.1588.2.1.1.1.23.3not-accessiblecurrent
swBlmPerfFltMntEntry
OBJECT-TYPE
Filter base monitoring counter for given port.
1.3.6.1.4.1.1588.2.1.1.1.23.3.1not-accessiblecurrent
swBlmPerfFltPort
OBJECT-TYPE
This object identifies the port number of the switch.
1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1SwPortIndexread-onlycurrent
swBlmPerfFltRefkey
OBJECT-TYPE
This object identifies the reference number of the filter. This reference number is assigned when a filter is created. In SNMP Index start one instead of 0, add one to actual ref key
1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2Integer32 (1..8)read-onlycurrent
swBlmPerfFltCnt
OBJECT-TYPE
Get statistics of filter based monitor. Filter based monitoring provides information about a filter hit count such as 1. Read command 2. SCSI or IP traffic 3. SCSI Read/Write
1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3OCTET STRING (SIZE(8))read-onlycurrent
swBlmPerfFltAlias
OBJECT-TYPE
Alias name for the filter.
1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4DisplayString (SIZE(0..20))read-onlycurrent
swTrunk
OBJECT-IDENTITY
The OID sub-tree for swTrunk group.
1.3.6.1.4.1.1588.2.1.1.1.24current
swSwitchTrunkable
OBJECT-TYPE
The trunking status of the switch - whether the switch supports the trunking feature or not. The values are yes(8) - the trunking feature is supported no(0). - the trunking feature is not supported.
1.3.6.1.4.1.1588.2.1.1.1.24.1INTEGER {no(0), yes(8)}read-onlycurrent
swTrunkTable
OBJECT-TYPE
Table to display trunking information for the switch.
1.3.6.1.4.1.1588.2.1.1.1.24.2not-accessiblecurrent
swTrunkEntry
OBJECT-TYPE
Entry for the trunking table.
1.3.6.1.4.1.1588.2.1.1.1.24.2.1not-accessiblecurrent
swTrunkPortIndex
OBJECT-TYPE
This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the front panel. e.g. port index 1 correspond to port number 0.
1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1SwPortIndexread-onlycurrent
swTrunkGroupNumber
OBJECT-TYPE
This object is a logical entity which specifies the Group Number to which the port belongs to. If this value is Zero it means the port is not Trunked.
1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2Integer32 (0..2147483647)read-onlycurrent
swTrunkMaster
OBJECT-TYPE
Port number that is the trunk master of the group. The trunk master implicitly defines the group. All ports with the same master are considered to be part of the same group.
1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3SwTrunkMasterread-onlycurrent
swPortTrunked
OBJECT-TYPE
The active trunk status for a member port. Values are enabled(1) or disabled(0).
1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4INTEGER {disabled(0), enabled(1)}read-onlycurrent
swTrunkGrpTable
OBJECT-TYPE
Table to display trunking Performance information for the switch.
1.3.6.1.4.1.1588.2.1.1.1.24.3not-accessiblecurrent
swTrunkGrpEntry
OBJECT-TYPE
Entry for the trunking Group table.
1.3.6.1.4.1.1588.2.1.1.1.24.3.1not-accessiblecurrent
swTrunkGrpNumber
OBJECT-TYPE
This object is a logical entity which specifies the Group Number to which port belongs to.
1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1Integer32 (0..2147483647)read-onlycurrent
swTrunkGrpMaster
OBJECT-TYPE
This object gives the master port id for the TrunkGroup.
1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2SwTrunkMasterread-onlycurrent
swTrunkGrpTx
OBJECT-TYPE
Gives the aggregate value of the transmitted words from this TrunkGroup.
1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3OCTET STRING (SIZE(8))read-onlycurrent
swTrunkGrpRx
OBJECT-TYPE
Gives the aggregate value of the received words by this TrunkGroup.
1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4OCTET STRING (SIZE(8))read-onlycurrent
swTopTalker
OBJECT-IDENTITY
The OID sub-tree for TopTalker group.
1.3.6.1.4.1.1588.2.1.1.1.25current
swTopTalkerMntMode
OBJECT-TYPE
Gives the mode in which toptalker is installed
1.3.6.1.4.1.1588.2.1.1.1.25.1INTEGER {fabricmode(1), fportmode(2)}read-onlycurrent
swTopTalkerMntNumEntries
OBJECT-TYPE
Gives the number of toptalking flows
1.3.6.1.4.1.1588.2.1.1.1.25.2Integer32 (1..32)read-onlycurrent
swTopTalkerMntTable
OBJECT-TYPE
Table to display toptalkingflows
1.3.6.1.4.1.1588.2.1.1.1.25.3not-accessiblecurrent
swTopTalkerMntEntry
OBJECT-TYPE
Entry for the toptalker table
1.3.6.1.4.1.1588.2.1.1.1.25.3.1not-accessiblecurrent
swTopTalkerMntIndex
OBJECT-TYPE
This object identifies the list/object entry
1.3.6.1.4.1.1588.2.1.1.1.25.3.1.1Integer32 (1..32)read-onlycurrent
swTopTalkerMntPort
OBJECT-TYPE
This object identifies the switch port number on which the f-port mode toptalker is added.
1.3.6.1.4.1.1588.2.1.1.1.25.3.1.2Integer32 (1..32)read-onlycurrent
swTopTalkerMntSpid
OBJECT-TYPE
This object identifies the SID of the host
1.3.6.1.4.1.1588.2.1.1.1.25.3.1.3Integer32 (1..32)read-onlycurrent
swTopTalkerMntDpid
OBJECT-TYPE
This object identifies the DID of the SID-DID pair
1.3.6.1.4.1.1588.2.1.1.1.25.3.1.4Integer32 (1..32)read-onlycurrent
swTopTalkerMntflow
OBJECT-TYPE
This object identifies the traffic flow in MB/sec
1.3.6.1.4.1.1588.2.1.1.1.25.3.1.5Integer32 (1..32)read-onlycurrent
swTopTalkerMntSwwn
OBJECT-TYPE
This object identifies the SID in WWN format of the host
1.3.6.1.4.1.1588.2.1.1.1.25.3.1.6FcWwnread-onlycurrent
swTopTalkerMntDwwn
OBJECT-TYPE
This object identifies the DID in WWN format of the SID-DID pair
1.3.6.1.4.1.1588.2.1.1.1.25.3.1.7FcWwnread-onlycurrent
swCpuOrMemoryUsage
OBJECT-IDENTITY
The OID sub-tree for cpu or memory usage group.
1.3.6.1.4.1.1588.2.1.1.1.26current
swCpuUsage
OBJECT-TYPE
System's cpu usage.
1.3.6.1.4.1.1588.2.1.1.1.26.1Integer32 (0..100)read-onlycurrent
swCpuNoOfRetries
OBJECT-TYPE
Number of times system should take cpu utilization sample before sending the CPU utilization trap.
1.3.6.1.4.1.1588.2.1.1.1.26.2Integer32 (1..100)read-onlycurrent
swCpuUsageLimit
OBJECT-TYPE
CPU usage limit
1.3.6.1.4.1.1588.2.1.1.1.26.3Integer32 (1..100)read-onlycurrent
swCpuPollingInterval
OBJECT-TYPE
Time interval between two memory samples.
1.3.6.1.4.1.1588.2.1.1.1.26.4Integer32 (10..3600)read-onlycurrent
swCpuAction
OBJECT-TYPE
Specifies the actions to be taken if system resources exceed the specified threshold.
1.3.6.1.4.1.1588.2.1.1.1.26.5Integer32 (0..3)read-onlycurrent
swMemUsage
OBJECT-TYPE
System's memory usage.
1.3.6.1.4.1.1588.2.1.1.1.26.6Integer32read-onlycurrent
swMemNoOfRetries
OBJECT-TYPE
Number of times system should take memory usage sample before sending the memory usage trap.
1.3.6.1.4.1.1588.2.1.1.1.26.7Integer32read-onlycurrent
swMemUsageLimit
OBJECT-TYPE
Memory usage limit
1.3.6.1.4.1.1588.2.1.1.1.26.8Integer32read-onlycurrent
swMemPollingInterval
OBJECT-TYPE
Time interval between two memory samples.
1.3.6.1.4.1.1588.2.1.1.1.26.9Integer32 (10..3600)read-onlycurrent
swMemAction
OBJECT-TYPE
Specifies the actions to be taken if system resources exceed the specified threshold.
1.3.6.1.4.1.1588.2.1.1.1.26.10Integer32 (0..3)read-onlycurrent
swMemUsageLimit1
OBJECT-TYPE
Low memory usage limit
1.3.6.1.4.1.1588.2.1.1.1.26.11Integer32read-onlycurrent
swMemUsageLimit3
OBJECT-TYPE
High memory usage limit
1.3.6.1.4.1.1588.2.1.1.1.26.12Integer32read-onlycurrent
swConnUnitPortStatExtentionTable
OBJECT-TYPE
This represents the Conn unit Port Stats
1.3.6.1.4.1.1588.2.1.1.1.27not-accessiblecurrent
swConnUnitPortStatEntry
OBJECT-TYPE
This represents the Conn unit Port Stats
1.3.6.1.4.1.1588.2.1.1.1.27.1not-accessiblecurrent
swConnUnitCRCWithBadEOF
OBJECT-TYPE
The number of frames with CRC error with Bad EOF.
1.3.6.1.4.1.1588.2.1.1.1.27.1.1OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitZeroTenancy
OBJECT-TYPE
This counter is incremented when the FL_port acquires the loop but does not transmit a frame.
1.3.6.1.4.1.1588.2.1.1.1.27.1.2OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitFLNumOfTenancy
OBJECT-TYPE
This counter is incremented when the FL_port acquires the loop.
1.3.6.1.4.1.1588.2.1.1.1.27.1.3OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitNLNumOfTenancy
OBJECT-TYPE
This counter is incremented when the NL_port acquires the loop.
1.3.6.1.4.1.1588.2.1.1.1.27.1.4OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitStopTenancyStarVation
OBJECT-TYPE
This counter is incremented when the FL_port can not transmit a frame because of lack of credit.
1.3.6.1.4.1.1588.2.1.1.1.27.1.5OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitOpend
OBJECT-TYPE
The number of times FC port entered OPENED state.
1.3.6.1.4.1.1588.2.1.1.1.27.1.6OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitTransferConnection
OBJECT-TYPE
The number of times FC port entered TRANSFER state.
1.3.6.1.4.1.1588.2.1.1.1.27.1.7OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitOpen
OBJECT-TYPE
The number of times FC port entered OPEN state.
1.3.6.1.4.1.1588.2.1.1.1.27.1.8OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitInvalidARB
OBJECT-TYPE
The number of times FC port received invalid ARB.
1.3.6.1.4.1.1588.2.1.1.1.27.1.9OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitFTB1Miss
OBJECT-TYPE
This counter is incremented when the port receives a frame with a DID that can not be routed by FCR.. Applicable to 8G platforms only.
1.3.6.1.4.1.1588.2.1.1.1.27.1.10OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitFTB2Miss
OBJECT-TYPE
This counter is incremented when the port receives a frame with an SID/DID combination that can not be routed by the VF module.Applicable to 8G platforms only.
1.3.6.1.4.1.1588.2.1.1.1.27.1.11OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitFTB6Miss
OBJECT-TYPE
This counter is incremented when port receives a frame with an SID that can not be routed by FCR. Applicable to 8G platforms.
1.3.6.1.4.1.1588.2.1.1.1.27.1.12OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitZoneMiss
OBJECT-TYPE
This counter is incremented when the port receives a frame with an SID and DID that are not zoned together.
1.3.6.1.4.1.1588.2.1.1.1.27.1.13OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitLunZoneMiss
OBJECT-TYPE
This counter is incremented when the port receives a frame with an SID, DID and LUN that are not zoned together( This is not currently used ).
1.3.6.1.4.1.1588.2.1.1.1.27.1.14OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitBadEOF
OBJECT-TYPE
The number of frames with bad end-of-frame.
1.3.6.1.4.1.1588.2.1.1.1.27.1.15OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitLCRX
OBJECT-TYPE
The number of link control frames received.
1.3.6.1.4.1.1588.2.1.1.1.27.1.16OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitRDYPriority
OBJECT-TYPE
The number of times that sending R_RDY or VC_RDY primitive signals was a higher priority than sending frames, due to diminishing credit reserves in the transmitter at the other end of the fibre.
1.3.6.1.4.1.1588.2.1.1.1.27.1.17OCTET STRING (SIZE(8))read-onlycurrent
swConnUnitLli
OBJECT-TYPE
The number low level interrupts generated by the physical and link layer.
1.3.6.1.4.1.1588.2.1.1.1.27.1.18OCTET STRING (SIZE(8))read-onlycurrent
sw28k
OBJECT-IDENTITY
The OID for Brocade's Silkworm 2800 model Fibre Channel Switch.
1.3.6.1.4.1.1588.2.1.1.2current
sw21kN24k
OBJECT-IDENTITY
The OID for Brocade's Silkworm 2100 and 2400 series model Fibre Channel Switch.
1.3.6.1.4.1.1588.2.1.1.3current
sw20x0
OBJECT-IDENTITY
The OID for Brocade's Silkworm 20x0 series model Fibre Channel Switch.
1.3.6.1.4.1.1588.2.1.1.4current

Notifications

NameOIDStatus
swFault
NOTIFICATION-TYPE
Obsoleted this trap as firmware doesn't support this trap. A swFault(1) is generated whenever the diagnostics detects a fault with the switch.
1.3.6.1.4.1.1588.2.1.1.1.0.1obsolete
swSensorScn
NOTIFICATION-TYPE
A swSensorScn(2) is generated whenever an environment sensor changes its operational state. For instance, a fan stop working. The VarBind in the Trap Data Unit shall contain the corresponding instance of the sensor status, sensor index, sensor type, sensor value (reading) and sensor information. Note that the sensor information contains the type of sensor and its number in textual format.
1.3.6.1.4.1.1588.2.1.1.1.0.2current
swFCPortScn
NOTIFICATION-TYPE
A swFCPortScn(3) is generated whenever an FC_Port changes its operational state. For instance, the FC_Port goes from on-line to offline. The VarBind in the Trap Data Unit shall contain the corresponding instance of the FC_Port's operational status, index, swFCPortName,swSsn and swFCPortFlag. swSsn is optional varbind sent when swExtTrap is also enabled.swVfId is optional if VF is enabled. The three arguments swGroupName, swGroupType, swGroupMemPos belong to swGroup table which is obsolete and not implemented.
1.3.6.1.4.1.1588.2.1.1.1.0.3current
swEventTrap
NOTIFICATION-TYPE
This trap is generated when an event whose level at or below swEventTrapLevel occurs.
1.3.6.1.4.1.1588.2.1.1.1.0.4current
swFabricWatchTrap
NOTIFICATION-TYPE
trap to be sent by Fabric Watch to notify of an event
1.3.6.1.4.1.1588.2.1.1.1.0.5current
swTrackChangesTrap
NOTIFICATION-TYPE
trap to be sent for tracking login/logout/config changes
1.3.6.1.4.1.1588.2.1.1.1.0.6current
swIPv6ChangeTrap
NOTIFICATION-TYPE
This trap is generated when an ipv6 address status change event occurs.
1.3.6.1.4.1.1588.2.1.1.1.0.7current
swPmgrEventTrap
NOTIFICATION-TYPE
This trap is generated when any partition manager change happens.
1.3.6.1.4.1.1588.2.1.1.1.0.8current
swFabricReconfigTrap
NOTIFICATION-TYPE
trap to be sent for tracking fabric reconfiguration
1.3.6.1.4.1.1588.2.1.1.1.0.9current
swFabricSegmentTrap
NOTIFICATION-TYPE
trap to be sent for tracking segmentation
1.3.6.1.4.1.1588.2.1.1.1.0.10current
swExtTrap
NOTIFICATION-TYPE
THIS IS INTERNAL TRAP
1.3.6.1.4.1.1588.2.1.1.1.0.11current