BROCADE-SYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.1588.2.1.1.1.1
- Last updated
- 1911-04-15 18:30
- Organization
- Brocade Communications Systems, Inc.,
- Revisions
- 1911-04-15 18:30, 1912-04-30 18:00
- Namespace
- extreme
- Source file
BROCADE-SYSTEM-MIB- Digest
sha256:35b8fa94264518d37e04b234996e615f5c26a3b5c41f577f2ad70006cf72ca6c
Description
The MIB module is for system information. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved.
Contact
Customer Support Group Brocade Communications Systems, 130 Holger Way, San Jose, CA 95134 U.S.A Tel: +1-408-333-8000 Fax: +1-408-333-8101 Email: support@Brocade.COM WEB: www.brocade.com
Imports
| From | Symbols |
|---|---|
| Brocade-TC | SwPortIndex, SwSensorIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
| SWBASE-MIB | sw |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BROCADE-SYSTEM-MIB Brocade-REG-MIB Brocade-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC SWBASE-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| FcPortFlag TEXTUAL-CONVENTION Represents the port status for a FC Flag. Currently this will indicate if the port is virtual or physical. | current | |||
| SwFwEvent type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swTrapsV2 OBJECT-IDENTITY The Traps for Brocade's Switch. | 1.3.6.1.4.1.1588.2.1.1.1.0 | current | ||
| swCurrentDate OBJECT-TYPE The current date information in displayable textual format. | 1.3.6.1.4.1.1588.2.1.1.1.1.1 | DisplayString (SIZE(0..64)) | read-only | current |
| swBootDate OBJECT-TYPE The date and time when the system last booted, in displayable textual format. | 1.3.6.1.4.1.1588.2.1.1.1.1.2 | DisplayString (SIZE(0..64)) | read-only | current |
| swFWLastUpdated OBJECT-TYPE The information indicates the date when the firmware was last updated, in displayable textual format. | 1.3.6.1.4.1.1588.2.1.1.1.1.3 | DisplayString (SIZE(0..64)) | read-only | current |
| swFlashLastUpdated OBJECT-TYPE The information indicates the date when the FLASH was last updated, in displayable textual format. | 1.3.6.1.4.1.1588.2.1.1.1.1.4 | DisplayString (SIZE(0..64)) | read-only | current |
| swBootPromLastUpdated OBJECT-TYPE The information indicates the date when the boot PROM was last updated, in displayable textual format. | 1.3.6.1.4.1.1588.2.1.1.1.1.5 | DisplayString (SIZE(0..64)) | read-only | current |
| swFirmwareVersion OBJECT-TYPE The current version of the firwmare. | 1.3.6.1.4.1.1588.2.1.1.1.1.6 | DisplayString (SIZE(0..24)) | read-only | current |
| swOperStatus OBJECT-TYPE The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external port; o offline(2) means the switch is not accessible; o testing(3) means the switch is in a built-in test mode and is not accessible by an external port; o faulty(4) means the switch is not operational. | 1.3.6.1.4.1.1588.2.1.1.1.1.7 | INTEGER {online(1), offline(2), testing(3), faulty(4)} | read-only | current |
| swSsn OBJECT-TYPE The soft serial number of the switch. | 1.3.6.1.4.1.1588.2.1.1.1.1.10 | DisplayString (SIZE(0..128)) | read-only | current |
| swFlashDLOperStatus OBJECT-TYPE The operational status of the FLASH. The operational states are as follow: o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgraded(2) state indicates that it contains the image upgraded from the swFlashDLHost.0.; o swCfUploaded(3) state indicates that the switch configuration file has been uploaded to the host; and o swCfDownloaded(4) state indicates that the switch configuration file has been downloaded from the host. o swFwCorrupted (5) state indicates that the firmware in the FLASH of the switch is corrupted. | 1.3.6.1.4.1.1588.2.1.1.1.1.11 | INTEGER {unknown(0), swCurrent(1), swFwUpgraded(2), swCfUploaded(3), swCfDownloaded(4), swFwCorrupted(5)} | read-only | current |
| swFlashDLAdmStatus OBJECT-TYPE The state of the FLASH. o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgrade(2) means that the firmware in the FLASH is to be upgraded from the host specified; o swCfUpload(3) means that the switch config file is to be uploaded to the host specified; or o swCfDownload(4) means that the switch config file is to be downloaded from the host specified. o swFwCorrupted(5) state indicates that the firmware in the FLASH is corrupted. This value is for informational purpose only. However, set of swFlashDLAdmStatus to this value is not allowed. The host is specified in swFlashDLHost.0. In addition, user name is specified in swFlashDLUser.0, and the file name specified in swFlashDLFile.0. Reference the user manual on the following commands, o firmwareDownload, o configUpload, and o configDownload. | 1.3.6.1.4.1.1588.2.1.1.1.1.12 | INTEGER {swCurrent(1), swFwUpgrade(2), swCfUpload(3), swCfDownload(4), swFwCorrupted(5)} | read-only | current |
| swBeaconOperStatus OBJECT-TYPE The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is off, each LED will be in their its regular status indicating color and state. | 1.3.6.1.4.1.1588.2.1.1.1.1.18 | INTEGER {on(1), off(2)} | read-only | current |
| swBeaconAdmStatus OBJECT-TYPE The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is set to off, each LED will be in its regular status indicating color and state. | 1.3.6.1.4.1.1588.2.1.1.1.1.19 | INTEGER {on(1), off(2)} | read-only | current |
| swDiagResult OBJECT-TYPE The result of the power-on startup (POST) diagnostics. | 1.3.6.1.4.1.1588.2.1.1.1.1.20 | INTEGER {sw-ok(1), sw-faulty(2), sw-embedded-port-fault(3)} | read-only | current |
| swNumSensors OBJECT-TYPE The number of sensors inside the switch. | 1.3.6.1.4.1.1588.2.1.1.1.1.21 | Integer32 (0..2147483647) | read-only | current |
| swSensorTable OBJECT-TYPE The table of sensor entries. | 1.3.6.1.4.1.1588.2.1.1.1.1.22 | not-accessible | current | |
| swSensorEntry OBJECT-TYPE An entry of the sensor information. | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 | not-accessible | current | |
| swSensorIndex OBJECT-TYPE This object identifies the sensor. | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 | SwSensorIndex | read-only | current |
| swSensorType OBJECT-TYPE This object identifies the sensor type. | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 | INTEGER {temperature(1), fan(2), power-supply(3)} | read-only | current |
| swSensorStatus OBJECT-TYPE The current status of the sensor. | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 | INTEGER {unknown(1), faulty(2), below-min(3), nominal(4), above-max(5), absent(6)} | read-only | current |
| swSensorValue OBJECT-TYPE The current value (reading) of the sensor. The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability to measure the actual value. In V2.0, the temperature sensor value will be in Celsius; the fan value will be in RPM (revolution per minute); and the power supply sensor reading will be unknown. | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 | Integer32 | read-only | current |
| swSensorInfo OBJECT-TYPE Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'. | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 | DisplayString (SIZE(0..255)) | read-only | current |
| swID OBJECT-TYPE The number of the logical switch (0/1). | 1.3.6.1.4.1.1588.2.1.1.1.1.24 | Integer32 | read-only | current |
| swEtherIPAddress OBJECT-TYPE The IP Address of the Ethernet interface of this logical switch. | 1.3.6.1.4.1.1588.2.1.1.1.1.25 | IpAddress | read-only | current |
| swEtherIPMask OBJECT-TYPE The IP Mask of the Ethernet interface of this logical switch. | 1.3.6.1.4.1.1588.2.1.1.1.1.26 | IpAddress | read-only | current |
| swIPv6Address OBJECT-TYPE IPV6 address. | 1.3.6.1.4.1.1588.2.1.1.1.1.29 | DisplayString | not-accessible | current |
| swIPv6Status OBJECT-TYPE The current status of ipv6 address. | 1.3.6.1.4.1.1588.2.1.1.1.1.30 | INTEGER {tentative(1), preferred(2), ipdeprecated(3), inactive(4)} | not-accessible | current |
| swFabric OBJECT-IDENTITY The OID sub-tree for swFabric group. | 1.3.6.1.4.1.1588.2.1.1.1.2 | current | ||
| swVfId OBJECT-TYPE The Virtual fabric id. | 1.3.6.1.4.1.1588.2.1.1.1.2.15 | Integer32 (0..255) | read-only | current |
| swFCport OBJECT-IDENTITY The OID sub-tree for swFCport group. | 1.3.6.1.4.1.1588.2.1.1.1.6 | current | ||
| swFCPortTable OBJECT-TYPE A table that contains, one entry for each switch port, configuration and service parameters of the port. | 1.3.6.1.4.1.1588.2.1.1.1.6.2 | not-accessible | current | |
| swFCPortEntry OBJECT-TYPE An entry containing the configuration and service parameters of the switch port. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 | not-accessible | current | |
| swFCPortIndex OBJECT-TYPE This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the front panel. E.g. port index 1 correspond to port number 0. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 | SwPortIndex | read-only | current |
| swFCPortType OBJECT-TYPE This object identifies the type of switch port. It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6). | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 | INTEGER {stitch(1), flannel(2), loom(3), bloom(4), rdbloom(5), wormhole(6), other(7), unknown(8)} | read-only | current |
| swFCPortPhyState OBJECT-TYPE This object identifies the physical state of the port: noCard(1) no card present in this switch slot; noTransceiver(2) no Transceiver module in this port. noGbic(2) was used previously. Transceiver is the generic name for GBIC, SFP etc.; laserFault(3) the module is signaling a laser fault (defective Transceiver); noLight(4) the module is not receiving light; noSync(5) the module is receiving light but is out of sync; inSync(6) the module is receiving light and is in sync; portFault(7) the port is marked faulty (defective Transceiver, cable or device); diagFault(8) the port failed diagnostics (defective G_Port or FL_Port card or motherboard); lockRef(9) the port is locking to the reference signal. validating(10) Validation is in progress invalidModule(11) Invalid SFP unknown(255) unknown. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 | INTEGER {noCard(1), noTransceiver(2), laserFault(3), noLight(4), noSync(5), inSync(6), portFault(7), diagFault(8), lockRef(9), validating(10), invalidModule(11), unknown(255)} | read-only | current |
| swFCPortOpStatus OBJECT-TYPE This object identifies the operational status of the port. The online(1) state indicates that user frames can be passed. The unknown(0) state indicates that likely the port module is physically absent (see swFCPortPhyState). | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 | INTEGER {unknown(0), online(1), offline(2), testing(3), faulty(4)} | read-only | current |
| swFCPortAdmStatus OBJECT-TYPE The desired state of the port. A management station may place the port in a desired state by setting this object accordingly. The testing(3) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the switch, swFCPortAdmStatus is then changed to either the online(1) or testing(3) states, or remains in the offline(2) state. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 | INTEGER {online(1), offline(2), testing(3), faulty(4)} | read-write | current |
| swFCPortLinkState OBJECT-TYPE This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in a FC-AL loop); disabled(2) - the port is not allowed to participate in the FC-PH protocol with its attached port(s); loopback(3) - the port may transmit frames through an internal path to verify the health of the transmitter and receiver path. Note that when the port's link state changes, its operational status (swFCPortOpStatus) will be affected. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 | INTEGER {enabled(1), disabled(2), loopback(3)} | read-write | current |
| swFCPortTxType OBJECT-TYPE This object indicates the media transmitter type of the port. The value may be: unknown(1) cannot determined to the port driver lw(2) long wave laser sw(3) short wave laser ld(4) long wave LED cu(5) copper (electrical). | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 | INTEGER {unknown(1), lw(2), sw(3), ld(4), cu(5)} | read-only | current |
| swFCPortTxWords OBJECT-TYPE This object counts the number of Fibre Channel words that the port has transmitted. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 | Counter32 | read-only | current |
| swFCPortRxWords OBJECT-TYPE This object counts the number of Fibre Channel words that the port has received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 | Counter32 | read-only | current |
| swFCPortTxFrames OBJECT-TYPE This object counts the number of (Fibre Channel) frames that the port has transmitted. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 | Counter32 | read-only | current |
| swFCPortRxFrames OBJECT-TYPE This object counts the number of (Fibre Channel) frames that the port has received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 | Counter32 | read-only | current |
| swFCPortRxC2Frames OBJECT-TYPE This object counts the number of Class 2 frames that the port has received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 | Counter32 | read-only | current |
| swFCPortRxC3Frames OBJECT-TYPE This object counts the number of Class 3 frames that the port has received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 | Counter32 | read-only | current |
| swFCPortRxLCs OBJECT-TYPE This object counts the number of Link Control frames that the port has received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 | Counter32 | read-only | current |
| swFCPortRxMcasts OBJECT-TYPE This object counts the number of Multicast frames that the port has received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 | Counter32 | read-only | current |
| swFCPortTooManyRdys OBJECT-TYPE This object counts the number of times when RDYs exceeds the frames received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 | Counter32 | read-only | current |
| swFCPortNoTxCredits OBJECT-TYPE This object counts the number of times when the transmit credit has reached zero. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 | Counter32 | read-only | current |
| swFCPortRxEncInFrs OBJECT-TYPE This object counts the number of encoding error or disparity error inside frames received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 | Counter32 | read-only | current |
| swFCPortRxCrcs OBJECT-TYPE This object counts the number of CRC errors detected for frames received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 | Counter32 | read-only | current |
| swFCPortRxTruncs OBJECT-TYPE This object counts the number of truncated frames that the port has received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 | Counter32 | read-only | current |
| swFCPortRxTooLongs OBJECT-TYPE This object counts the number of received frames that are too long. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 | Counter32 | read-only | current |
| swFCPortRxBadEofs OBJECT-TYPE This object counts the number of received frames that have bad EOF delimiter. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 | Counter32 | read-only | current |
| swFCPortRxEncOutFrs OBJECT-TYPE This object counts the number of encoding error or disparity error outside frames received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 | Counter32 | read-only | current |
| swFCPortRxBadOs OBJECT-TYPE This object counts the number of invalid Ordered Sets received. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 | Counter32 | read-only | current |
| swFCPortC3Discards OBJECT-TYPE This object counts the number of Class 3 frames that the port has discarded. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 | Counter32 | read-only | current |
| swFCPortMcastTimedOuts OBJECT-TYPE This object counts the number of Multicast frames that has been timed out. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 | Counter32 | read-only | current |
| swFCPortTxMcasts OBJECT-TYPE This object counts the number of Multicast frames that has been transmitted. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 | Counter32 | read-only | current |
| swFCPortLipIns OBJECT-TYPE This object counts the number of Loop Initializations that has been initiated by loop devices attached. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 | Counter32 | read-only | current |
| swFCPortLipOuts OBJECT-TYPE This object counts the number of Loop Initializations that has been initiated by the port. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 | Counter32 | read-only | current |
| swFCPortLipLastAlpa OBJECT-TYPE This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 | OCTET STRING (SIZE(4)) | read-only | current |
| swFCPortWwn OBJECT-TYPE The World_wide_Name of the Fibre Channel port. The contents of an instance are in the IEEE extended format as specified in FC-PH; the 12-bit port identifier represents the port number within the switch. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 | OCTET STRING (SIZE(8)) | read-only | current |
| swFCPortSpeed OBJECT-TYPE The desired baud rate for the port. It can have the values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5), or 10GB (6). Some of the above values may not be supported by all type of switches. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 | INTEGER {one-GB(1), two-GB(2), auto-Negotiate(3), four-GB(4), eight-GB(5), ten-GB(6), unknown(7)} | read-write | current |
| swFCPortName OBJECT-TYPE A string indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 | DisplayString (SIZE(0..255)) | read-only | current |
| swFCPortSpecifier OBJECT-TYPE This string indicates the physical port number of the addressed port. The format of the string is: <slot>/port, where 'slot' being present only for bladed systems. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 | DisplayString | read-only | current |
| swFCPortFlag OBJECT-TYPE A bit map of port status flags which includes the information of port type. Currently this will indicate if the port is virtual or physical. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 | FcPortFlag | read-only | current |
| swFCPortBrcdType OBJECT-TYPE The Brocade port type. | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 | INTEGER {unknown(1), other(2), fl-port(3), f-port(4), e-port(5), g-port(6), ex-port(7)} | read-only | current |
| swEvent OBJECT-IDENTITY The OID sub-tree for swEvent group. | 1.3.6.1.4.1.1588.2.1.1.1.8 | current | ||
| swEventTable OBJECT-TYPE The table of event entries. | 1.3.6.1.4.1.1588.2.1.1.1.8.5 | not-accessible | current | |
| swEventEntry OBJECT-TYPE An entry of the event table. | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 | not-accessible | current | |
| swEventIndex OBJECT-TYPE This object identifies the event entry. | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 | Integer32 (0..2147483647) | read-only | current |
| swEventTimeInfo OBJECT-TYPE This object identifies the date and time when this event occurred, in textual format. | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 | DisplayString (SIZE(0..64)) | read-only | current |
| swEventLevel OBJECT-TYPE This object identifies the severity level of this event entry. | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 | INTEGER {critical(1), error(2), warning(3), informational(4), debug(5)} | read-only | current |
| swEventRepeatCount OBJECT-TYPE This object identifies how many times this particular event has occurred. | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 | Integer32 (0..2147483647) | read-only | current |
| swEventDescr OBJECT-TYPE This object identifies the textual description of the event. | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 | DisplayString | read-only | current |
| swEventVfId OBJECT-TYPE This object identifies the Virtual fabric id. | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.6 | Integer32 (0..255) | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| swFCPortScn NOTIFICATION-TYPE This trap is sent whenever an FC port operational status or its type changed. The events that trigger this trap are port goes to online/offline, port type changed to E-port/F-port/FL-port. swFCPortName and swSsn are optional varbind in the trap PDU.swSsn is optional varbind sent when swExtTrap is also enabled.swVfId is optional if VF is enabled. | 1.3.6.1.4.1.1588.2.1.1.1.0.3 | current |
| swEventTrap NOTIFICATION-TYPE This trap is generated when an event whose level at or below swEventTrapLevel occurs. | 1.3.6.1.4.1.1588.2.1.1.1.0.4 | current |
| swStateChangeTrap NOTIFICATION-TYPE This trap is sent whenever switch state changes to online/offline | 1.3.6.1.4.1.1588.2.1.1.1.0.12 | current |