MIBs Depot

FA-EXT-MIB

Registered at
1.3.6.1.4.1.1588.2.1.1.1.28
Last updated
2013-10-29 13:54
Organization
Brocade Communications Systems, Inc.,
Revisions
2010-11-22 10:30, 2013-09-12 10:30, 2013-09-24 13:55, 2013-10-29 13:54
Namespace
extreme
Source file
FA-EXT-MIB
Digest
sha256:e8845246fa36c39af8d7e530ffb164269b4accdec09acaf7215301f25f8bb174

Description

The MIB module is Extension for FA-MIB. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved.

Contact

Customer Support Group Brocade Communications Systems, 1745 Technology Drive, San Jose, CA 95110 U.S.A Tel: +1-408-392-6061 Fax: +1-408-392-6656 Email: support@Brocade.COM WEB: www.brocade.com

Imports

FromSymbols
FCMGMT-MIBconnUnitPortEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue
SW-MIBsw

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

Brocade-REG-MIB
Brocade-TC
FA-EXT-MIB
FCMGMT-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
SW-MIB

Textual conventions

NameOIDSyntaxAccessStatus
CiperMode
TEXTUAL-CONVENTION
Represents cipher mode.
current
EncryptCompressStatus
TEXTUAL-CONVENTION
Represents status of feature encryption or compression.
current
FapwwnType
type

Objects

NameOIDSyntaxAccessStatus
swSfpStatTable
OBJECT-TYPE
This represents the diagnostic stats of SFPs.
1.3.6.1.4.1.1588.2.1.1.1.28.1not-accessiblecurrent
swSfpStatEntry
OBJECT-TYPE
This represents the diagnostic stats of SFPs
1.3.6.1.4.1.1588.2.1.1.1.28.1.1not-accessiblecurrent
swSfpTemperature
OBJECT-TYPE
This object identifies the temperature of SFP
1.3.6.1.4.1.1588.2.1.1.1.28.1.1.1OCTET STRING (SIZE(8))read-onlycurrent
swSfpVoltage
OBJECT-TYPE
This object identifies the voltage of SFP.
1.3.6.1.4.1.1588.2.1.1.1.28.1.1.2OCTET STRING (SIZE(8))read-onlycurrent
swSfpCurrent
OBJECT-TYPE
This object identifies the current of SFP.
1.3.6.1.4.1.1588.2.1.1.1.28.1.1.3OCTET STRING (SIZE(8))read-onlycurrent
swSfpRxPower
OBJECT-TYPE
This object identifies the Rx power consumption of SFP.
1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4OCTET STRING (SIZE(8))read-onlycurrent
swSfpTxPower
OBJECT-TYPE
This object identifies the Tx power consumption of SFP.
1.3.6.1.4.1.1588.2.1.1.1.28.1.1.5OCTET STRING (SIZE(8))read-onlycurrent
swSfpPoweronHrs
OBJECT-TYPE
This object identifies the power on hours of SFP. This is applicable only to 16G SFPs.
1.3.6.1.4.1.1588.2.1.1.1.28.1.1.6Integer32read-onlycurrent
swSfpUnitId
OBJECT-TYPE
This object identifies unit ID of SFP. This is applicable only to QSFP.
1.3.6.1.4.1.1588.2.1.1.1.28.1.1.7Integer32read-onlycurrent
swFapwwnFeature
OBJECT-IDENTITY
The OID sub-tree for Fapwwn feature. Using this feature user can configure virtual port WWN for a port.
1.3.6.1.4.1.1588.2.1.1.1.28.2current
swPortFapwwnConfigTable
OBJECT-TYPE
This represents the configuration of ports.
1.3.6.1.4.1.1588.2.1.1.1.28.2.1not-accessiblecurrent
swPortFapwwnConfigEntry
OBJECT-TYPE
This represents the configuration of ports.
1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1not-accessiblecurrent
swPortFapwwnConfigEnable
OBJECT-TYPE
Represents the Fapwwn status. This is for per port.
1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.1TruthValueread-onlycurrent
swPortFapwwnConfigFapwwn
OBJECT-TYPE
Represents the Fapwwn. For AG it is range of WWNs. If Fapwwn feature is not enabled in a port this object value is NA(Not Applicable.
1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.2DisplayString (SIZE(256))read-onlycurrent
swPortFapwwnConfigType
OBJECT-TYPE
Represents the Fapwwn type.
1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.3FapwwnTyperead-onlycurrent
swPortConfigTable
OBJECT-TYPE
This represents the configuration of encryption / compression feature on a port
1.3.6.1.4.1.1588.2.1.1.1.28.3not-accessiblecurrent
swPortConfigEntry
OBJECT-TYPE
This represents the configuration of encryption / compression feature on a port
1.3.6.1.4.1.1588.2.1.1.1.28.3.1not-accessiblecurrent
swPortEncrypt
OBJECT-TYPE
Represents the encryption status on a port.
1.3.6.1.4.1.1588.2.1.1.1.28.3.1.1EncryptCompressStatusread-onlycurrent
swPortCompression
OBJECT-TYPE
Represents the compression status on port.
1.3.6.1.4.1.1588.2.1.1.1.28.3.1.2EncryptCompressStatusread-onlycurrent
swPortCipherKeySize
OBJECT-TYPE
Represents the Cipher key size. FOS supports 256 bytes key
1.3.6.1.4.1.1588.2.1.1.1.28.3.1.3Integer32 (0..2147483647)read-onlycurrent
swPortCipherMode
OBJECT-TYPE
Represents the Cipher mode.
1.3.6.1.4.1.1588.2.1.1.1.28.3.1.4CiperModeread-onlycurrent
swConnUnitPortTable
OBJECT-TYPE
This represents the Conn unit Port entry
1.3.6.1.4.1.1588.2.1.1.1.28.4not-accessiblecurrent
swConnUnitPortEntry
OBJECT-TYPE
This represents the Conn unit Port Entry
1.3.6.1.4.1.1588.2.1.1.1.28.4.1not-accessiblecurrent
swConnUnitPortCapableSpeeds
OBJECT-TYPE
This represents the available speeds, that a port is capable of configuring
1.3.6.1.4.1.1588.2.1.1.1.28.4.1.1OCTET STRINGread-onlycurrent
swConnUnitPortSpeedMode
OBJECT-TYPE
This represents the type of speed modes that can be configured for the particular port. The modes that can be configured are auto-negotiable and static speeds.
1.3.6.1.4.1.1588.2.1.1.1.28.4.1.2INTEGER {auto-neg(1), static(2)}read-onlycurrent
swConnUnitPortFECMode
OBJECT-TYPE
This represents the port Forward Error Correction Mode. FEC feature is only applicable to 10G/16G platforms.
1.3.6.1.4.1.1588.2.1.1.1.28.4.1.3INTEGER {unknown(1), disabled(2), enabled(3), notsupported(4)}read-onlycurrent
swConnUnitPortFECState
OBJECT-TYPE
This represents FEC state of a port.If in link both sfp connected are of brocade vendor type then state is active, else it will be inactive.
1.3.6.1.4.1.1588.2.1.1.1.28.4.1.4INTEGER {unknown(0), active(1), inactive(2), notsupported(3)}read-onlycurrent