SCTE-HMS-QAM-MIB
- Registered at
- 1.3.6.1.4.1.5591.1.11.5.3.1
- Last updated
- 2008-07-16 03:05
- Organization
- SCTE HMS Working Group
- Revisions
- 2008-07-16 03:05, 2008-04-18 10:55, 2008-02-04 18:50, 2007-12-17 11:50, 2007-10-03 17:00, 2007-10-02 12:00
- Namespace
- standard
- Source file
SCTE-HMS-QAM-MIB- Digest
sha256:e20dccebc7a79d6656a60574be268d44e8e95dbc7d05fb3d7b47aac254705c90
Description
This MIB module is for representing Edge QAM equipment present in the headend (or indoor) and is supported by a SNMP agent. It defines QAM channel related configuration MIB objects associated with both QAM channel's physical and logical characteristics. qamChannelTable is optional for devices that are supporting equivalent DOCSIS MIB objects. qamConfigTable is optional and applies to devices that choose to provide logical level configuration.
Contact
SCTE HMS Subcommittee, Chairman mailto:standards@scte.org
Imports
| From | Symbols |
|---|---|
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SCTE-HMS-HEADENDIDENT-TC-MIB | QAMChannelInterleaveMode, QAMChannelModulationFormat |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SCTE-HMS-HEADENDIDENT-TC-MIB SCTE-HMS-QAM-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| qamMIBObjects OBJECT-IDENTITY This branch specifies the QAM MIB objects. | 1.3.6.1.4.1.5591.1.11.5.3.1.1 | current | ||
| qamChannelTable OBJECT-TYPE This table describes the configuration and attributes of each QAM channel of the QAM designated by ifIndex. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1 | not-accessible | current | |
| qamChannelEntry OBJECT-TYPE There is an entry in the table for each QAM channel. The index to this table is the ifIndex of each QAM channel. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1 | not-accessible | current | |
| qamChannelFrequency OBJECT-TYPE The center frequency of the QAM channel. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.1 | Unsigned32 | read-only | current |
| qamChannelModulationFormat OBJECT-TYPE RF Modululation for this output QAM channel when qamChannelContWaveMode is off. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.2 | QAMChannelModulationFormat | read-only | current |
| qamChannelInterleaverLevel OBJECT-TYPE The interleaver level for FEC coding. level1 - implies interleaver level 1 level2 - implies interleaver level 2 This object is only valid when AnnexMode has the value annexB. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.3 | INTEGER {level1(1), level2(2)} | read-only | current |
| qamChannelInterleaverMode OBJECT-TYPE The interleaving depth or operation mode of the interleaver. 'taps8Increment16': protection 5.9/4.1 usec, latency .22/.15 msec 'taps16Increment8': protection 12/8.2 usec, latency .48/.33 msec 'taps32Increment4': protection 24/16 usec, latency .98/.68 msec 'taps64Increment2': protection 47/33 usec, latency 2/1.4 msec 'taps128Increment1': protection 95/66 usec, latency 4/2.8 msec 'taps12increment17': protection 18/14 usec, latency 0.43/0.32 msec 'taps128increment2': protection 190/132 usec, latency 8/5.6 msec 'taps128increment3': protection 285/198 usec, latency 12/8.4 msec 'taps128increment4': protection 380/264 usec, latency 16/11 msec 'taps128increment5': protection 475/330 usec, latency 20/14 msec 'taps128increment6': protection 570/396 usec, latency 24/17 msec 'taps128increment7: protection 664/462 usec, latency 28/20 msec 'taps128increment8': protection 759/528 usec, latency 32/22 msec The value 'taps12increment17' is supported by EuroDOCSIS cable systems only, and the others by DOCSIS cable systems. If the QAM chammel interface is down, this object either returns the configured value, or the value of 'unknown'. The value of 'other' is returned if the interleave is known but not defined in the above list. When the qamChannelInterleaverLevel is set to 'level 1', a single interleaving depth is supported, namely 'taps128Increment1'. When the qamChannelInterleaverLevel is set to 'level2', all the other interleaving depths are also supported. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.4 | QAMChannelInterleaveMode | read-only | current |
| qamChannelPower OBJECT-TYPE The output power of the QAM channel. If the QAM channel is muted, value is not valid. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.5 | Integer32 | read-only | current |
| qamChannelSquelch OBJECT-TYPE Indicates whether the QAM port is muted or not. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.6 | INTEGER {unmuted(1), muted(2)} | read-only | current |
| qamChannelContWaveMode OBJECT-TYPE Indicates whether Continuous Wave mode is enabled or not for output. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.7 | INTEGER {cwmOff(1), cwmOn(2)} | read-only | current |
| qamChannelAnnexMode OBJECT-TYPE Specifies the ITU-T standard supported by the QAM channel annexA - standard specified by Annex A of ITU-T J.83 annexB - standard specified by Annex B of ITU-T J.83 annexC - standard specified by Annex C of ITU-T J.83 Other - other standard that may apply. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.8 | INTEGER {unknown(1), other(2), annexA(3), annexB(4), annexC(5)} | read-only | current |
| qamChannelCommonTable OBJECT-TYPE This table decribes MPEG and DOCSIS characteristics that are not part of the DOCSIS-IF-MIB. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.2 | not-accessible | current | |
| qamChannelCommonEntry OBJECT-TYPE Each entry of this table describes attributes of an RF channel for both MPEG and DOCSIS QAMs. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1 | not-accessible | current | |
| qamChannelCommonOutputBw OBJECT-TYPE The QAM channel output bandwidth or capacity. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1.1 | Integer32 | read-only | current |
| qamChannelCommonUtilization OBJECT-TYPE The utilization of the QAM channel in 0.1 percentage. This rate may be calculated as transport stream packets / ( transport stream packets + null packets ). If not applicable, a value of -1 is returned. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1.2 | Integer32 (-1 | 0..1000) | read-only | current |
| qamConfigTable OBJECT-TYPE This table is designed to show the IP addresses configuration for the QAM channels, optionally UDP port range, Program Number range associated with QAM channels. Configuring these parameters is necessary when performing session-based provisioning. A session-based provisioning request must conform to the configurations in this table. The QAM channels within an QAM device may be partitioned to support multiple UDP, QAM or ProgramNo ranges. Though it's helpful to partition the QAM channels when the total number of QAM channel increases, this is not a must. This table may also be used to show the reserved UDP ports, or program numbers for special purposes instead of using default ones allowed by hardware, software, or MPEG protocol. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3 | not-accessible | current | |
| qamConfigEntry OBJECT-TYPE Each entry corresponds to the configuration of a QAM channel range. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1 | not-accessible | current | |
| qamConfigIndex OBJECT-TYPE The table index. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.1 | Unsigned32 | not-accessible | current |
| qamConfigQamChannelIdMin OBJECT-TYPE QAMChannelId maybe within a line card or global depending on entPhysicalIndex. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.2 | Integer32 | read-only | current |
| qamConfigQamChannelIdMax OBJECT-TYPE QAMChannelId maybe within a line card or global depending on entPhysicalIndex. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.3 | Integer32 | read-only | current |
| qamConfigIPAddrType OBJECT-TYPE The type of the program destination address as defined by inetAddressType. The default value is 1 for ipv4(1) | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.4 | InetAddressType | read-only | current |
| qamConfigIPAddr OBJECT-TYPE IP address of the QAM channel. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.5 | InetAddress | read-only | current |
| qamConfigUdpPortRangeMin OBJECT-TYPE The lowest UDP port of the UDP port range that can be used on this QAM channel. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.6 | Integer32 (0..65535) | read-only | current |
| qamConfigUdpPortRangeMax OBJECT-TYPE The highest UDP port of the UDP port range that can be used on this QAM channel. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.7 | Integer32 (0..65535) | read-only | current |
| qamConfigOutputProgNoMin OBJECT-TYPE The lowest MPEG output program number that can be used on the QAM channel. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.8 | Integer32 (1..65535) | read-only | current |
| qamConfigOutputProgNoMax OBJECT-TYPE The highest MPEG output program number that can be used on the QAM channel. | 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.9 | Integer32 (1..65535) | read-only | current |
| qamMIBConformance OBJECT-IDENTITY This branch describes the different QAM MIB object groups and the different level of compliance. | 1.3.6.1.4.1.5591.1.11.5.3.1.2 | current | ||
| qamMIBCompliances OBJECT-IDENTITY The different levels of compliance to the QAM MIB. | 1.3.6.1.4.1.5591.1.11.5.3.1.2.1 | current | ||
| qamMIBGroups OBJECT-IDENTITY The QAM MIB object groups. | 1.3.6.1.4.1.5591.1.11.5.3.1.2.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| qamSupport MODULE-COMPLIANCE These objects describe the support level for QAM. | 1.3.6.1.4.1.5591.1.11.5.3.1.2.1.1 | current |
| docsisSupport MODULE-COMPLIANCE These objects are not covered by any DOCSIS MIB, but they would need to be supported by a DOCSIS EQAM. | 1.3.6.1.4.1.5591.1.11.5.3.1.2.1.2 | current |
| qamMpegDocsisCommonGroup OBJECT-GROUP These objects are not covered by any DOCSIS MIB. It is legitimate for a DOCSIS QAM to support them. | 1.3.6.1.4.1.5591.1.11.5.3.1.2.2.1 | current |
| qamChannelGroup OBJECT-GROUP The objects characterizing the RF channel and that may be supported by an equivalent DOCSIS MIB object. | 1.3.6.1.4.1.5591.1.11.5.3.1.2.2.2 | current |
| qamConfigGroup OBJECT-GROUP QAM configuration objects. | 1.3.6.1.4.1.5591.1.11.5.3.1.2.2.3 | current |