QOS
- Registered at
- 1.3.6.1.4.1.25651.1.2.3.5
- Namespace
- exalt
- Source file
QOS- Digest
sha256:fda7cbc5a1f2efe9e11d3146481406dafaf233150d5e15dd58fd57ad067bfd75
Imports
| From | Symbols |
|---|---|
| ExaltComProducts | radioConfig |
| ExaltComm | EnableStatusT, QosTagT, VlanIdT |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ExaltComProducts ExaltComm QOS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25651.1.2.3.5.6 | syslogCfg | SYSLOG |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| QosCos0WeightT TEXTUAL-CONVENTION This MIB variable defines available weights for Queue 0 | current | |||
| QosCos1WeightT TEXTUAL-CONVENTION This MIB variable defines available weights for Queue 1 | current | |||
| QosCos2WeightT TEXTUAL-CONVENTION This MIB variable defines available weights for Queue 2 | current | |||
| QosCos3WeightT TEXTUAL-CONVENTION This MIB variable defines available weights for Queue 3 | current | |||
| QosModeT TEXTUAL-CONVENTION This MIB variable sets Qos Mode | current | |||
| QosPriorityT TEXTUAL-CONVENTION This MIB variable sets Qos priority, the higher number the higher priority | current | |||
| QosScheduleModeT TEXTUAL-CONVENTION This MIB variable defines available QoS Scheduler modes | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| advSystemConfig OBJECT-IDENTITY This is the device specific advanced configuration section. | 1.3.6.1.4.1.25651.1.2.3.5 | current | ||
| extAirG2QoS OBJECT-IDENTITY QOS configuration. | 1.3.6.1.4.1.25651.1.2.3.5.8 | current | ||
| qosDefaultQueue OBJECT-TYPE The default queue to catch all traffic that don't belong to any queue. | 1.3.6.1.4.1.25651.1.2.3.5.8.1 | QosPriorityT | read-write | current |
| qosEth1Mode OBJECT-TYPE This setting set the qos mode or disable QoS on ETH1. | 1.3.6.1.4.1.25651.1.2.3.5.8.2 | QosModeT | read-write | current |
| qosEth2Mode OBJECT-TYPE This setting set the qos mode or disable QoS on ETH2. | 1.3.6.1.4.1.25651.1.2.3.5.8.3 | QosModeT | read-write | current |
| qosDiffServList OBJECT-TYPE This is a table of Qos DiffServ value and proiority. | 1.3.6.1.4.1.25651.1.2.3.5.8.4 | not-accessible | current | |
| qosDiffServEntry OBJECT-TYPE This is DiffServ table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.4.1 | not-accessible | current | |
| diffServValue OBJECT-TYPE This is the value for the corresponding DiffServ table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.4.1.1 | Integer32 (0..63) | read-write | current |
| diffServPriority OBJECT-TYPE This is the priority for the corresponding DiffServ table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.4.1.2 | QosPriorityT | read-write | current |
| diffServEnable OBJECT-TYPE This is the status for the corresponding DiffServ table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.4.1.3 | EnableStatusT | read-write | current |
| qosPortETH1Conf OBJECT-IDENTITY | 1.3.6.1.4.1.25651.1.2.3.5.8.5 | |||
| qosEth1m802dot1pList OBJECT-TYPE This is a table of Qos 802.1p tag and proiority. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.1 | not-accessible | current | |
| qosEth1m802dot1pEntry OBJECT-TYPE This is a 802.1p table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1 | not-accessible | current | |
| tagEth1Priority OBJECT-TYPE This is the priority for the corresponding ETH1 802.1p tag entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1.1 | QosPriorityT | read-write | current |
| tagEth1Status OBJECT-TYPE This is the status for the corresponding ETH1 802.1p tag entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1.2 | EnableStatusT | read-write | current |
| qosEth1PortList OBJECT-TYPE This is a table of Qos Port mode. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.2 | not-accessible | current | |
| qosEth1PortEntry OBJECT-TYPE This is a Port mode table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1 | not-accessible | current | |
| portEth1Priority OBJECT-TYPE This is the priority for the corresponding ETH1 Port mode entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1.1 | QosPriorityT | read-write | current |
| portEth1Status OBJECT-TYPE This is the status for the corresponding ETH1 Port mode entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1.2 | EnableStatusT | read-write | current |
| qosPortETH2Conf OBJECT-IDENTITY | 1.3.6.1.4.1.25651.1.2.3.5.8.6 | |||
| qosEth2m802dot1pList OBJECT-TYPE This is a table of Qos 802.1p tag and proiority. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.1 | not-accessible | current | |
| qosEth2m802dot1pEntry OBJECT-TYPE This is a 802.1p table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1 | not-accessible | current | |
| tagEth2Priority OBJECT-TYPE This is the priority for the corresponding ETH2 802.1p tag entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1.1 | QosPriorityT | read-write | current |
| tagEth2Status OBJECT-TYPE This is the status for the corresponding ETH2 802.1p tag entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1.2 | EnableStatusT | read-write | current |
| qosEth2PortList OBJECT-TYPE This is a table of Qos Port mode. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.2 | not-accessible | current | |
| qosEth2PortEntry OBJECT-TYPE This is a ETH2 Port mode table entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1 | not-accessible | current | |
| portEth2Priority OBJECT-TYPE This is the priority for the corresponding ETH2 Port mode entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1.1 | QosPriorityT | read-write | current |
| portEth2Status OBJECT-TYPE This is the status for the corresponding ETH2 Port mode entry. | 1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1.2 | EnableStatusT | read-write | current |
| qosScheduler OBJECT-IDENTITY QOS Scheduler configuration. | 1.3.6.1.4.1.25651.1.2.3.5.8.7 | current | ||
| qosScheduleMode OBJECT-TYPE The QoS queues scheduler mode | 1.3.6.1.4.1.25651.1.2.3.5.8.7.1 | QosScheduleModeT | read-write | current |
| qosCos3Weight OBJECT-TYPE QoS queue 3 weight. | 1.3.6.1.4.1.25651.1.2.3.5.8.7.2 | QosCos3WeightT | read-write | current |
| qosCos2Weight OBJECT-TYPE QoS queue 2 weight. | 1.3.6.1.4.1.25651.1.2.3.5.8.7.3 | QosCos2WeightT | read-write | current |
| qosCos1Weight OBJECT-TYPE QoS queue 1 weight. | 1.3.6.1.4.1.25651.1.2.3.5.8.7.4 | QosCos1WeightT | read-write | current |
| qosCos0Weight OBJECT-TYPE QoS queue 0 weight. | 1.3.6.1.4.1.25651.1.2.3.5.8.7.5 | QosCos0WeightT | read-write | current |
| commitQosSettings OBJECT-TYPE This command allows saving or clear configuration. Options are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes. | 1.3.6.1.4.1.25651.1.2.3.5.8.1000 | DisplayString | read-write | current |