ExaltComm

Registered at: 1.3.6.1.4.1.25651
Namespace: exalt
Source file: ExaltComm
Digest: sha256:652dc0a23c72a7dde66e016a634b636f814fcc9bfb9e9c16d561ac8d1b69728d

Imports

From	Symbols
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`

Imported by

6 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ExaltComm
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

Arc	Name	Module
1.3.6.1.4.1.25651.1	productsMIB	`ExaltComProducts`

Textual conventions

Name	OID	Syntax	Access	Status
AcmBaseModulationT TEXTUAL-CONVENTION These are the supported ACM Base Modulation types.				current
AcmModulationT TEXTUAL-CONVENTION These are the supported ACM Modulation types. When ACM is disabled or when telemetry is down, the modulation is -9999.				current
AcmPolicyT TEXTUAL-CONVENTION This MIB variable selects ACM Policy. 0 - sets Conservative policy, 1 - sets Agressive policy.				current
AcmPowerBoostEnableT TEXTUAL-CONVENTION ACM Power Boost Enable / Disable parameter				current
AcmTargetModulationT TEXTUAL-CONVENTION These are the supported ACM Target Modulation types.				current
AlarmLevelT TEXTUAL-CONVENTION The Alarm Levels.				current
AntPortT TEXTUAL-CONVENTION This MIB variable selects antenna port for ODU. 1- portA for 5rc, port H for 5r , ANT1 for 5rc Denali 2- portB for 5rc, portV for 5r, ANT2 for 5rc Denali;				current
AuxNmsMode TEXTUAL-CONVENTION The NMS mode (in-band or out-of-band)				current
BandSelectT TEXTUAL-CONVENTION The Band Selections				current
BandwidthT TEXTUAL-CONVENTION The Radio Bandwidth.				current
BuzTimeoutT TEXTUAL-CONVENTION This MIB variable selects ODU buzzer timeout period. 1 - turns off buzzer, 2 - sets buzzer timeout period to 10 minutes, 3 - sets buzzer timeout period to 2 hours.				current
DS3LineCodeT TEXTUAL-CONVENTION The DS3 Line Codes.				current
DS3LoopBackModeT TEXTUAL-CONVENTION These are the loopback modes of the DS3 interfaces.				current
DS3StatusT TEXTUAL-CONVENTION The DS3 enabled status.				current
DfsAntGainT TEXTUAL-CONVENTION This MIB variable sets DFS antenna gain (in dB); available antenna gain ranges from 18 to 38 dB, with 1 dB step.				current
DfsEnableT TEXTUAL-CONVENTION This MIB variable sets DFS enable/disable option; this is option is availble for Radio A only.				current
DiplexerConfigG2T TEXTUAL-CONVENTION These are diplexer configuration options for lower band radios, where Unconfigured is not configurable.				current
DiplexerConfigT TEXTUAL-CONVENTION These are diplexer configuration options for lower band radios, where Unconfigured is not configurable.				current
DualRadioXpicEnableT TEXTUAL-CONVENTION Disable XPIC or enable XPIC with vertical/horizontal polarity				current
EnableStatusT TEXTUAL-CONVENTION Enable / Disable parameter				current
EthAuxStatusT TEXTUAL-CONVENTION The Aux ethernet port Alarm enabled status				current
EthMainStatusT TEXTUAL-CONVENTION The Main ethernet port status.				current
EthPortMode TEXTUAL-CONVENTION The Ethernet port operation Modes				current
EthernetMgmtTypeT TEXTUAL-CONVENTION Defines Ethernet switch management options				current
ExaltEnableT TEXTUAL-CONVENTION Enable / Disable parameter				current
ExtAlarmsT TEXTUAL-CONVENTION This is the condidtion that an alarm should be raised.				current
FileTransferStartT TEXTUAL-CONVENTION Supported file start/status types.				current
FileTransferTypeT TEXTUAL-CONVENTION Supported file transfer types.				current
FlyWheelT TEXTUAL-CONVENTION This MIB variable selects ODU fly wheeling timeout period. 0 - fly wheel for 5 minutes, 1 - fly wheel forever.				current
FreqGroupT TEXTUAL-CONVENTION The Frequency Group				current
GbeEthPortMode TEXTUAL-CONVENTION The Ethernet port operation Modes for GigE interfaces				current
Led4ColorT TEXTUAL-CONVENTION 4 Color front pannel LED Bitmap.				current
LinkDistanceT TEXTUAL-CONVENTION The Distance between Radios in miles.				current
MefEnableT TEXTUAL-CONVENTION Enable or disable MEF setting				current
MefIrgT TEXTUAL-CONVENTION MEF IRG				current
MefMacT TEXTUAL-CONVENTION MEF MAC Block				current
MefMasterModeT TEXTUAL-CONVENTION MEF Master Mode (Sync Ethernet)				current
MefRateLimitTypeT TEXTUAL-CONVENTION The MEF ethernet rate limit type in KBPS (or) MBPS.				current
MefRateLimitValueT TEXTUAL-CONVENTION The MEF ethernet rate limit, if the rate limit is enabled, the value is applied on to the port. eg., rate in KBPS (64..1792, stepsize 64) rate in MBPS (2..100, stepsize 1) and (104..1000, stepsize 8)				current
MhsLockOnT TEXTUAL-CONVENTION Lock on configuration of the MHS.				current
MhsRoleT TEXTUAL-CONVENTION The designated role of the MHS.				current
MhsTimeoutT TEXTUAL-CONVENTION The lock on timeout of the MHS.				current
ModulationT TEXTUAL-CONVENTION These are the supported Modulation types.				current
NtpClientEnableT TEXTUAL-CONVENTION Enable or disable NTP client				current
PerformanceModeT TEXTUAL-CONVENTION These are the supported performance mode when TCM modulation is used.				current
PolarizationT TEXTUAL-CONVENTION This MIB variable selects ODU polarizations for GigE radios. 1 - selects portV for Veritical , 2 - select portH for Horizontal , 3- for Cross-Pole (V+H)				current
QosQueueSizeByteT TEXTUAL-CONVENTION The Qos queue size in bytes				current
QosQueueSizePercentT TEXTUAL-CONVENTION The Qos queue size in percentage				current
QosTagT TEXTUAL-CONVENTION This MIB variable sets Qos 802.1p tag.				current
QosTtlT TEXTUAL-CONVENTION The Qos time to live in miliseconds in a queue				current
RadioCollocSyncSourceT TEXTUAL-CONVENTION This is the source to get SYNC timing. Choices are Off, GPS, or Internal				current
RadioCollocSyncTypeT TEXTUAL-CONVENTION This is the radio SYNC type. Choices are SYNC_AUTO, SYNC_SRC, SYNC_SINK or SYNC_NONE				current
RadioFreq24T TEXTUAL-CONVENTION This is the 2.4 ghz band freq ranges.				current
RadioFreq5gT TEXTUAL-CONVENTION These are the 5.3 and 5.8 Freq ranges.				current
RadioSourceT TEXTUAL-CONVENTION The Radio Source. Radio A or Radio B				current
RadioTxPwr11gT TEXTUAL-CONVENTION The 11 GHz Band Power levels.				current
RadioTxPwr13gT TEXTUAL-CONVENTION The 13 GHz Band Power levels.				current
RadioTxPwr15gT TEXTUAL-CONVENTION The 15 GHz Band Power levels.				current
RadioTxPwr18gT TEXTUAL-CONVENTION The 18 GHz Band Power levels.				current
RadioTxPwr23gT TEXTUAL-CONVENTION The 23 GHz Band Power levels.				current
RadioTxPwr24T TEXTUAL-CONVENTION The 2.4 GHz band Power levels.				current
RadioTxPwr24gT TEXTUAL-CONVENTION The 24 GHz Band Power levels.				current
RadioTxPwr28gT TEXTUAL-CONVENTION The 28 GHz Band Power levels.				current
RadioTxPwr38gT TEXTUAL-CONVENTION The 38 GHz Band Power levels.				current
RadioTxPwr42gT TEXTUAL-CONVENTION The 42 GHz Band Power levels.				current
RadioTxPwr5gT TEXTUAL-CONVENTION The 5 GHz Band Power levels.				current
RadioTxPwr6gT TEXTUAL-CONVENTION The 6 GHz Band Power levels.				current
RadioTxPwr7LgT TEXTUAL-CONVENTION The 7.0L GHz Band Power levels.				current
RadioTxPwr7gT TEXTUAL-CONVENTION The 7 GHz Band Power levels.				current
RadioTxPwr8gT TEXTUAL-CONVENTION The 8 GHz Band Power levels.				current
RadioTxPwrHP11gT TEXTUAL-CONVENTION The 11 GHz HP Band Power levels.				current
RslPortT TEXTUAL-CONVENTION This MIB variable sets the RF channel for antenna alignment purpose.				current
SyslogEnableT TEXTUAL-CONVENTION Enable or disable Syslog logging to remote.				current
SyslogFilterSelectT TEXTUAL-CONVENTION Select logging filter to control events to be sent to remote host				current
TcmModulationT TEXTUAL-CONVENTION These are the supported TCM Modulation types. When ACM is enabled, the TCM modulation will be invalid.				current
TddFrameSizeT TEXTUAL-CONVENTION The TDD Frame Size enum in tenths of milliseconds.				current
Te1LboT TEXTUAL-CONVENTION The Te1 LBO types.				current
Te1LineCodeT TEXTUAL-CONVENTION The T1/E1 Line Codes.				current
Te1LoopBackModeT TEXTUAL-CONVENTION These are the loopback modes of the T1/E1 interfaces.				current
Te1StatusT TEXTUAL-CONVENTION The T1/E1 enabled status.				current
TimeZoneT TEXTUAL-CONVENTION Time Zone				current
TxDcycleT TEXTUAL-CONVENTION This sets Fixed Asymmetric Throughput in both tx and rx directions. User Options are: tx(20%)/rx(80%), 35/65, 50/50, 65/35 and 80/20.				current
TxOffsetT TEXTUAL-CONVENTION This MIB variable sets TX offset(in uSecs) of our radios to sync with other vendors' radios in a collocated configuration.				current
V35CTSHandshakeT TEXTUAL-CONVENTION The V35 CTS handshake.				current
V35ClockInversionT TEXTUAL-CONVENTION The V35 clock inversion.				current
V35LoopBackModeT TEXTUAL-CONVENTION These are the loopback modes of the V35 interfaces.				current
V35RateT TEXTUAL-CONVENTION The V35 channel rate Depends upon the T1/E1 settings of V35 Interface channel rate selction differs To set V35_T1, T1 mode should be selected To set V35_E1, E1 mode should be selected.				current
V35StatusT TEXTUAL-CONVENTION The V35 enabled status.				current
V35TxClockT TEXTUAL-CONVENTION The V35 transmit clock .				current
VlanGroupT TEXTUAL-CONVENTION These are the Valid options for vlan ethernet interfaces.				current
VlanIdT TEXTUAL-CONVENTION The VLAN ID				current
VlanStatusT TEXTUAL-CONVENTION This is definition for Vlan status. (Enabled or disabled)				current

Objects

Name	OID	Syntax	Access	Status
exaltcommunications OBJECT-IDENTITY	1.3.6.1.4.1.25651