MIBs Depot

ExaltComProducts

Registered at
1.3.6.1.4.1.25651.1
Last updated
2013-04-29 10:21
Organization
Exalt
Revisions
2013-04-29 10:21
Namespace
exalt
Source file
ExaltComProducts
Digest
sha256:ee1ed0289e36a732a2e827cb6ec30fb5b7b4de98ee2c57a999b0dabbeba80dbd

Description

Exalt devices

Contact

Exalt Wireless Inc. 250 E Hacienda Ave., Campbell, CA, 95008 USA

Imports

FromSymbols
ExaltCommAcmModulationT, AlarmLevelT, AuxNmsMode, EnableStatusT, EthAuxStatusT, EthMainStatusT, EthPortMode, ExaltEnableT, FileTransferStartT, FileTransferTypeT, Led4ColorT, NtpClientEnableT, Te1LboT, Te1LineCodeT, Te1LoopBackModeT, Te1StatusT, TimeZoneT, VlanGroupT, VlanStatusT, exaltcommunications
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

6 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ExaltComProducts
ExaltComm
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.25651.1.1productsMIBNotifications
1.3.6.1.4.1.25651.1.2productsMIBObjects

Textual conventions

NameOIDSyntaxAccessStatus
PwType
TEXTUAL-CONVENTION
This is a PW field.
current

Objects

NameOIDSyntaxAccessStatus
productsMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.1
productsMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2
radioInfo
OBJECT-IDENTITY
Common Radio Information to all Exalt devices.
1.3.6.1.4.1.25651.1.2.1current
modelName
OBJECT-TYPE
A descriptive name for the Radio. See Web, Radio Information, Model Name.
1.3.6.1.4.1.25651.1.2.1.1DisplayString (SIZE(0..20))read-onlycurrent
partNumber
OBJECT-TYPE
The Part Number of the Radio. See Web, Radio Information, Part Number.
1.3.6.1.4.1.25651.1.2.1.2DisplayString (SIZE(0..20))read-onlycurrent
serialNumber
OBJECT-TYPE
The Radio Serial Number. See Web, Radio Inforamtion, Serial Number.
1.3.6.1.4.1.25651.1.2.1.3DisplayString (SIZE(0..20))read-onlycurrent
interfaceType
OBJECT-TYPE
The Interfaces available on this radio. Ethernet, T1/E1, etc. See Web, Radio Information, Interface Type.
1.3.6.1.4.1.25651.1.2.1.4DisplayString (SIZE(0..30))read-onlycurrent
firmwareVersion
OBJECT-TYPE
The Radio Firmware Version. See Web, Radio Information, Firmware Version.
1.3.6.1.4.1.25651.1.2.1.5DisplayString (SIZE(0..32))read-onlycurrent
bootVersion
OBJECT-TYPE
The Radio Boot Code Version. See Web, Radio Information, Boot Version.
1.3.6.1.4.1.25651.1.2.1.6DisplayString (SIZE(0..32))read-onlycurrent
rdkDbVer
OBJECT-TYPE
The Device RDK Database Version. See Web, Radio Information, RDK Database Version.
1.3.6.1.4.1.25651.1.2.1.11DisplayString (SIZE(0..32))read-onlycurrent
txFreqRange
OBJECT-TYPE
The Radio Tx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Transmit range. TDD radios have one frequency range. See Web, Radio Information, RF Frequency Band.
1.3.6.1.4.1.25651.1.2.1.12DisplayString (SIZE(0..32))read-onlycurrent
rxFreqRange
OBJECT-TYPE
The Radio Rx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Receive range. TDD radios have one frequency range. See Web, Radio Information, RF Frequency Band.
1.3.6.1.4.1.25651.1.2.1.13DisplayString (SIZE(0..32))read-onlycurrent
rfFreqBand
OBJECT-TYPE
The Device Frequency Band (Range). TDD radios have N/A value in this field. FDD radios have TX High or TX Low depending on used diplexer and Transmit frequency. See Web, Radio Information, Tx Band.
1.3.6.1.4.1.25651.1.2.1.14DisplayString (SIZE(0..32))read-onlycurrent
hwId
OBJECT-TYPE
The Device Hardware ID number. See Web, Radio Information, Hardware ID number
1.3.6.1.4.1.25651.1.2.1.15DisplayString (SIZE(0..32))read-onlycurrent
modelNumber
OBJECT-TYPE
The Model Number of the Radio. See Web, Radio Information, Model Number
1.3.6.1.4.1.25651.1.2.1.16DisplayString (SIZE(0..32))read-onlycurrent
licenseFeatures
OBJECT-TYPE
The list of the features enabled by License Key
1.3.6.1.4.1.25651.1.2.1.17DisplayString (SIZE(0..128))read-onlycurrent
radioAdmin
OBJECT-IDENTITY
Radio Administration parameters.
1.3.6.1.4.1.25651.1.2.2current
sysDate
OBJECT-TYPE
The Radio System Date, MM/DD/YYYY. See Web, Administration, Settings, Date. To make permanent, write save to commitAdminSettings after change. After commit, SNMP restarts and will be down for 30 seconds.
1.3.6.1.4.1.25651.1.2.2.1DisplayString (SIZE(10))read-writecurrent
sysTime
OBJECT-TYPE
The Radio System Time, HH:MM:SS, as 24 hours. See Web, Administration, Settings, Time. To make permanent, write save to commitAdminSettings after change. After commit, SNMP restarts and will be down for 30 seconds.
1.3.6.1.4.1.25651.1.2.2.2DisplayString (SIZE(8))read-writecurrent
radioName
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.2.3
rnLocal
OBJECT-TYPE
The user specifiable Radio Name for this radio. See Web, Administration, Settings, Radio Name. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.3.1DisplayString (SIZE(1..32))read-writecurrent
rnRemote
OBJECT-TYPE
The Radio Name of the Radio at the far end of this RF Link. Can only be set at that radio. See Web, Administration, Settings, Radio Name.
1.3.6.1.4.1.25651.1.2.2.3.2DisplayString (SIZE(0..32))read-onlycurrent
linkName
OBJECT-TYPE
The user specifiable Link Name for this radio. See Web, Administration, Settings, Link Name. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.4DisplayString (SIZE(0..32))read-writecurrent
linkSecKey
OBJECT-TYPE
The Link Security Key must match on both ends of an RF Link for traffic to pass. See Web, Administration, Settings, Link Security Key. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.5DisplayString (SIZE(12))read-writecurrent
adminPassword
OBJECT-TYPE
The password for admin login to Web/CLI. See Web, Administration, Settings, Admin Password. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.6DisplayString (SIZE(1..16))read-writecurrent
userPassword
OBJECT-TYPE
The password for user login to Web/CLI. See Web, Administration, Settings, User Password. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.7DisplayString (SIZE(1..16))read-writecurrent
ipAddress
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.2.8
ipLocal
OBJECT-TYPE
The IP address of local radio. This IP address is used to manage radio. See Web, Administration, Settings, IP Address. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.8.1IpAddressread-writecurrent
ipRemote
OBJECT-TYPE
The IP address of the remote Radio. This IP address is used to manage Remote radio. Can only be set at that radio. See Web, Administration, Settings, IP Address.
1.3.6.1.4.1.25651.1.2.2.8.2IpAddressread-onlycurrent
subnetMask
OBJECT-TYPE
The Subnet Mask for IP address of local radio. See Web, Administration, Settings, IP Mask. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.9IpAddressread-writecurrent
ipAddressNetmask
OBJECT-TYPE
The IP address and Subnet Mask of local radio. ie 10.0.0.1/24. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.10DisplayString (SIZE(9..18))read-writecurrent
defaultGateway
OBJECT-TYPE
The Default Gateway for local radio port. See Web, Administration, Settings, Default Gateway. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.11IpAddressread-writecurrent
aesEnable
OBJECT-TYPE
The AES enable(0)/disable(1). AES (Advance Encryption Standard) can be implemented to provide additional data security for the wireless link. This function requires an upgrade license key (purchased separately). See Web, Administration, Settings, AES Settings, Enable AES. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.12INTEGER {aesDisable(0), aesEnable(1)}read-writecurrent
aesKey
OBJECT-TYPE
The symmetric AES key for encrypt/decrypt payload data. Different bitlength encryption license keys (for example, 128-bit and 256-bit) are available, depending on model type and license type. AES Key should match both on local radio and far end radio. See Web, Administration, Settings, AES Settings, AES Key. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.13DisplayString (SIZE(1..64))read-writecurrent
licKey
OBJECT-TYPE
The license key which defines radio features and capabilities. See Web, Administration, Settings, License Key. To make permanent, write save to commitAdminSettings after change.
1.3.6.1.4.1.25651.1.2.2.14DisplayString (SIZE(1..32))read-writecurrent
snmpConfig
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.2.17
trapIpaddr1
OBJECT-TYPE
The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address.
1.3.6.1.4.1.25651.1.2.2.17.1IpAddressread-writecurrent
trapIpaddrEnable1
OBJECT-TYPE
Enable/Disable trap ip address.
1.3.6.1.4.1.25651.1.2.2.17.2EnableStatusTread-onlycurrent
trapIpaddr2
OBJECT-TYPE
The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address.
1.3.6.1.4.1.25651.1.2.2.17.3IpAddressread-writecurrent
trapIpaddrEnable2
OBJECT-TYPE
Enable/Disable trap ip address.
1.3.6.1.4.1.25651.1.2.2.17.4EnableStatusTread-writecurrent
trapIpaddr3
OBJECT-TYPE
The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address.
1.3.6.1.4.1.25651.1.2.2.17.5IpAddressread-writecurrent
trapIpaddrEnable3
OBJECT-TYPE
Enable/Disable trap ip address.
1.3.6.1.4.1.25651.1.2.2.17.6EnableStatusTread-writecurrent
trapIpaddr4
OBJECT-TYPE
The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address.
1.3.6.1.4.1.25651.1.2.2.17.7IpAddressread-writecurrent
trapIpaddrEnable4
OBJECT-TYPE
Enable/Disable trap ip address.
1.3.6.1.4.1.25651.1.2.2.17.8EnableStatusTread-writecurrent
trapAuth
OBJECT-TYPE
Authentication trap enable(1)/disable(0). This is an SNMP standard trap when password information for SNMP is incorrect. See Web, Administration, SNMP, Traps, Authentication Trap.
1.3.6.1.4.1.25651.1.2.2.17.9EnableStatusTread-writecurrent
trapReboot
OBJECT-TYPE
Reboot trap enable(0)/disable(1). This trap is sent after any radio reboot to inform the manager of the reboot status. See Web, Administration, SNMP, Traps, Radio Reboot Trap.
1.3.6.1.4.1.25651.1.2.2.17.10EnableStatusTread-writecurrent
trapLocLinkStat
OBJECT-TYPE
Local Link Status trap enable(0)/disable(1). This trap is sent when Link is in errored state (equivalent to the Link LED). See Web, Administration, SNMP, Traps, Local Link Status Trap.
1.3.6.1.4.1.25651.1.2.2.17.11EnableStatusTread-writecurrent
trapLocAlarmStat
OBJECT-TYPE
Local Alarm Status trap enable(0)/disable(1). This trap is sent when local radio Status is in errored state (equivalent to the Status LED). See Web, Administration, SNMP, Traps, Local Radio Status Trap.
1.3.6.1.4.1.25651.1.2.2.17.12EnableStatusTread-writecurrent
trapRemAlarmStat
OBJECT-TYPE
Remote Alarm Status trap enable(0)/disable(1). This trap is sent when remote radio Status is in errored state (equivalent to the Status LED). See Web, Administration, SNMP, Traps, Remote Radio Status Trap.
1.3.6.1.4.1.25651.1.2.2.17.13EnableStatusTread-writecurrent
trapLocTempStat
OBJECT-TYPE
Local Temperature Status trap enable(0)/disable(1). This trap is sent when the internal temperature reaches the warning point. See Web, Administration, SNMP, Traps, Temperature Status Trap.
1.3.6.1.4.1.25651.1.2.2.17.14EnableStatusTread-writecurrent
trapv1Enable
OBJECT-TYPE
SNMPv1 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 1. See Web, Administration, SNMP, Traps, Enable SNMPv1 Traps.
1.3.6.1.4.1.25651.1.2.2.17.15EnableStatusTread-writecurrent
trapv2cEnable
OBJECT-TYPE
SNMPv2c Traps enable(0)/disable(1). Enables traps for SNMP protocol version 2c. See Web, Administration, SNMP, Traps, Enable SNMPv2c Traps.
1.3.6.1.4.1.25651.1.2.2.17.16EnableStatusTread-writecurrent
trapv3Enable
OBJECT-TYPE
SNMPv3 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 3. See Web, Administration, SNMP, Traps, Enable SNMPv3 Traps.
1.3.6.1.4.1.25651.1.2.2.17.17EnableStatusTread-writecurrent
trapLocRslStat
OBJECT-TYPE
Local RSL Status trap enable(0)/disable(1). This trap is sent when the local RSL drops below the value set in the RSL Threshold Value (dBm) field. See Web, Administration, SNMP, Traps, Local RSL Status Trap.
1.3.6.1.4.1.25651.1.2.2.17.18EnableStatusTread-writecurrent
trapLocRslThreshold
OBJECT-TYPE
Local RSL Threshold. Exalt recommends that this trap be set to a value 5dBm or 10dBm above the threshold as a warning that the system has faded and may be approaching an outage. See Web, Administration, SNMP, Traps, Threshold Value.
1.3.6.1.4.1.25651.1.2.2.17.19INTEGERread-writecurrent
commitSnmpSettings
OBJECT-TYPE
Option strings to be written are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes.
1.3.6.1.4.1.25651.1.2.2.17.1000DisplayString (SIZE(4..200))read-writecurrent
ntp
OBJECT-IDENTITY
NTP and Time zone configuration.
1.3.6.1.4.1.25651.1.2.2.18current
ntpClientEnable
OBJECT-TYPE
this mib to enable/disable the NTP client in the radio. 0 - disable NTP client. 1 - enable with 1 NTP server. 2 - enable with 2 NTP servers. 3 - enable with 3 NTP servers. 4 - enable with 4 NTP servers.
1.3.6.1.4.1.25651.1.2.2.18.1NtpClientEnableTread-writecurrent
ntpServer1IpAddr
OBJECT-TYPE
IP address for the first NTP server in xxx.xxx.xxx.xxx format
1.3.6.1.4.1.25651.1.2.2.18.2DisplayString (SIZE(7..15))read-writecurrent
ntpServer2IpAddr
OBJECT-TYPE
IP address for the second NTP server in xxx.xxx.xxx.xxx format
1.3.6.1.4.1.25651.1.2.2.18.3DisplayString (SIZE(7..15))read-writecurrent
ntpServer3IpAddr
OBJECT-TYPE
IP address for the third NTP server in xxx.xxx.xxx.xxx format
1.3.6.1.4.1.25651.1.2.2.18.4DisplayString (SIZE(7..15))read-writecurrent
ntpServer4IpAddr
OBJECT-TYPE
IP address for the forth NTP server in xxx.xxx.xxx.xxx format
1.3.6.1.4.1.25651.1.2.2.18.5DisplayString (SIZE(7..15))read-writecurrent
ntpTimeZoneSelect
OBJECT-TYPE
Time Zone selection. 0 - (GMT-11:00) Samoa 1 - (GMT-10.00) Hawaii 2 - (GMT-09:00) Alaska 3 - (GMT-08:00) Pacific Time 4 - (GMT-07:00) Arizona 5 - (GMT-07:00) Montain Time 6 - (GMT-06:00) Central Time 7 - (GMT-05:00) Eastern Time 8 - (GMT-05:00) Indiana (East) 9 - (GMT-04:00) Atlantic Time (Canada) 10- (GMT) Coordinated Universal Time 11- (GMT) London 12- (GMT+01:00) Berlin 13- (GMT+01:00) Belgrade 14- (GMT+01:00) Paris 15- (GMT+02:00) Cairo 16- (GMT+02:00) Helsinki 17- (GMT+03:00) Baghdad 18- (GMT+03:00) Moscow 19- (GMT+03:30) Tehran 20- (GMT+04:30) Kabul 21- (GMT+05:00) Karachi 22- (GMT+07:00) Bangkok 23- (GMT+08:00) Shanghai 24- (GMT+08:00) Taipei 25- (GMT+09:00) Tokyo 26- (GMT+09:00) Seoul 27- (GMT+10:00) Sydney 28- (GMT+10:00) Vladivostok
1.3.6.1.4.1.25651.1.2.2.18.6TimeZoneTread-writecurrent
commitNtpSettings
OBJECT-TYPE
This command allows saving or clear the NTP and Tome Zone configuration. If the save includes the change of time zone, the radio will automatically reboot to take effect the newly selected time zone. Option strings to be written are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes.
1.3.6.1.4.1.25651.1.2.2.18.1000DisplayString (SIZE(4..200))read-writecurrent
commitAdminSettings
OBJECT-TYPE
The Commit Administration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem.
1.3.6.1.4.1.25651.1.2.2.1000DisplayString (SIZE(4..200))read-writecurrent
radioConfig
OBJECT-IDENTITY
The Radio Configuration Section.
1.3.6.1.4.1.25651.1.2.3current
systemConfig
OBJECT-IDENTITY
This is the device specific configuration section.
1.3.6.1.4.1.25651.1.2.3.1current
commitSystemSettings
OBJECT-TYPE
The Commit System Configuration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem.
1.3.6.1.4.1.25651.1.2.3.1.1000DisplayStringread-writecurrent
interface
OBJECT-IDENTITY
Radio Interfaces Configuration section.
1.3.6.1.4.1.25651.1.2.3.2current
te1
OBJECT-IDENTITY
T1,E1 interfaces Configuration section. Section allows to configure T1/E1 ports on the radio if any.
1.3.6.1.4.1.25651.1.2.3.2.2current
te1NumChannels
OBJECT-TYPE
The Number of T1 or E1 channels supported by the Radio.
1.3.6.1.4.1.25651.1.2.3.2.2.1Gauge32read-onlycurrent
te1NumActiveChannels
OBJECT-TYPE
The Current number of channels available, based on bandwitdh of the RF link and the license key.
1.3.6.1.4.1.25651.1.2.3.2.2.2Gauge32read-onlycurrent
selectT1orE1
OBJECT-TYPE
Select operation mode of T1/E1 interfaces. Either T1(0) or E1(1). See Web, Configuration, Interface, T1/E1, Set To E1/T1 Mode button.
1.3.6.1.4.1.25651.1.2.3.2.2.3INTEGER {t1(0), e1(1)}read-writecurrent
te1Interfaces
OBJECT-TYPE
Attributes for T1 or E1 ports.
1.3.6.1.4.1.25651.1.2.3.2.2.4not-accessiblecurrent
te1Interface
OBJECT-TYPE
An entry in the T1/E1 Attribute table.
1.3.6.1.4.1.25651.1.2.3.2.2.4.1not-accessiblecurrent
te1Status
OBJECT-TYPE
The T1/E1 status: enable(1)/disable(0). Parameter allows to enable/disable each individual T1 channel. See Web, Configuration, Interface, T1/E1, Status. To make permanent, write save to commitTe1Settings after change.
1.3.6.1.4.1.25651.1.2.3.2.2.4.1.1Te1StatusTread-writecurrent
t1LBO
OBJECT-TYPE
The Line Build Out length range. Valid values (ft): lbo0to133(0), lbo133to266(1), lbo266to399(2), lbo399to533(3), lbo533to655(4). See Web, Configuration, Interface, T1/E1, LBO. To make permanent, write save to commitTe1Settings after change.
1.3.6.1.4.1.25651.1.2.3.2.2.4.1.2Te1LboTread-writecurrent
te1AIS
OBJECT-TYPE
The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails or when there is no E1 signal available from the far end to provide the user at the local end. See Web, Configuration, Interface, T1/E1, AIS. To make permanent, write save to commitTe1Settings after change.
1.3.6.1.4.1.25651.1.2.3.2.2.4.1.3Te1StatusTread-writecurrent
t1LineCode
OBJECT-TYPE
The T1/E1 Line Code type: b8zs(0), ami(1). See Web, Configuration, Interface, T1/E1, AIS, Line Code. To make permanent, write save to commitTe1Settings after change.
1.3.6.1.4.1.25651.1.2.3.2.2.4.1.4Te1LineCodeTread-writecurrent
te1LoopBackMode
OBJECT-TYPE
The Loop Back Mode for a T1/E1 interface. Valid values: disabled(0), ExternalLocal(1), ExternalRemote(2), Internal(3). All loopback configurations control the loop at the Line Interface integrated circuit, which is the device wired directly to the front panel ports. See Web, Configuration, Interface, T1/E1, AIS, Loopback. To make permanent, write save to commitTe1Settings after change.
1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5Te1LoopBackModeTread-writecurrent
commitTe1Settings
OBJECT-TYPE
The Commit TE1 Configuration settings command. Valid values: 'save', 'clear'. Configuration changes to TE1 ports via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem.
1.3.6.1.4.1.25651.1.2.3.2.2.1000DisplayString (SIZE(4..200))read-writecurrent
fileManagement
OBJECT-IDENTITY
The File Management Section. This section allows to initiate Upload/Download firmware/configuration/logs, perform Firmware activation procedure.
1.3.6.1.4.1.25651.1.2.3.3current
currentFwFilename
OBJECT-TYPE
The file name of the currently running firmware. See Web, Administration, File Management, File Activation, Current File.
1.3.6.1.4.1.25651.1.2.3.3.1DisplayString (SIZE(0..100))read-onlycurrent
alternateFwFilename
OBJECT-TYPE
The file name of the alternate firmware image. See Web, Administration, File Management, File Activation, Alternative File.
1.3.6.1.4.1.25651.1.2.3.3.2DisplayString (SIZE(0..100))read-onlycurrent
swapFWimage
OBJECT-TYPE
Swap the firmware images and restart radio. To perform swap operation 'swap' command needs to be sent to this parameter. For ExtendAirG2 to perform revert to factory operation 'factory' command needs to be sent. Radio will become unavailable for several minutes.
1.3.6.1.4.1.25651.1.2.3.3.3DisplayString (SIZE(0..200))read-writecurrent
fileTransfer
OBJECT-IDENTITY
The File Transfer Section. This section allows to initiate Upload/Download firmware/configuration/logs over TFTP protocol.
1.3.6.1.4.1.25651.1.2.3.3.4current
tftpServerIp
OBJECT-TYPE
The TFTP Server IP address.
1.3.6.1.4.1.25651.1.2.3.3.4.1DisplayString (SIZE(7..15))read-writecurrent
uploadFilename
OBJECT-TYPE
The name of the file for upload operation. For configuration file uploadFilename should be always 'config.xml'. uploadFilename value should match the file name in TFTP server folder.
1.3.6.1.4.1.25651.1.2.3.3.4.2DisplayString (SIZE(0..127))read-writecurrent
transferType
OBJECT-TYPE
The file transfer type. Valid values: - uploadFirmware(0) - uploadConfig(1) - uploadRDD(2) (Valid only for TDD radios) - downloadFirmware(3) - downloadConfig(4) - downloadMIBs(5) - downloadEventLogs(6). The actual operation starts via updating transferStart parameter value.
1.3.6.1.4.1.25651.1.2.3.3.4.3FileTransferTypeTread-writecurrent
transferStart
OBJECT-TYPE
TransferStart parameter is used to initiate file transfer operation. Send startTransfer(1) to this parameter.
1.3.6.1.4.1.25651.1.2.3.3.4.4FileTransferStartTread-writecurrent
transferStatus
OBJECT-TYPE
The current file transfer status.
1.3.6.1.4.1.25651.1.2.3.3.4.5DisplayString (SIZE(0..127))read-onlycurrent
factoryFwFilename
OBJECT-TYPE
The file name of the factory firmware image. See Web, Administration, File Management, File Activation, Factory File.
1.3.6.1.4.1.25651.1.2.3.3.5DisplayString (SIZE(0..100))read-onlycurrent
radioMonitor
OBJECT-IDENTITY
Monitor Various components.
1.3.6.1.4.1.25651.1.2.4current
alarms
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2
almLocal
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.3
locSysAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.3.1
locLinkState
OBJECT-TYPE
The Link Status Alarm. Possible values: - almNORMAL(0) - Error-free connection (BER<10e-6) - almMINOR(1) - Errorred connection (BER<10e-3) - almMAJOR(2) - No link (BER>10e-3) See Web, Monitor, Alarms, Link
1.3.6.1.4.1.25651.1.2.4.2.3.1.1AlarmLevelTread-onlycurrent
locTempAlarm
OBJECT-TYPE
The Temperature Alarm state. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range See Web, Monitor, Alarms, Temperature
1.3.6.1.4.1.25651.1.2.4.2.3.1.2AlarmLevelTread-onlycurrent
locCurrentTemp
OBJECT-TYPE
The Internal Temperature in Celsius.
1.3.6.1.4.1.25651.1.2.4.2.3.1.3Integer32read-onlycurrent
locCurrentTempS
OBJECT-TYPE
The Internal Temperature as a string.
1.3.6.1.4.1.25651.1.2.4.2.3.1.4DisplayStringread-onlycurrent
locLinkSecMismatch
OBJECT-TYPE
This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match - almMAJOR(2) - Link Secutiry keys do not match
1.3.6.1.4.1.25651.1.2.4.2.3.1.9AlarmLevelTread-onlycurrent
locLinkStateV
OBJECT-TYPE
Vertical Link Status Alarm. -<g89><>
1.3.6.1.4.1.25651.1.2.4.2.3.1.15AlarmLevelTread-onlycurrent
locLinkStateH
OBJECT-TYPE
Horizontal Link Status Alarm. -<g89><>
1.3.6.1.4.1.25651.1.2.4.2.3.1.16AlarmLevelTread-onlycurrent
locEthAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.3.2
locTe1Alarms
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.3.3
locTe1LinkSummary
OBJECT-TYPE
The T1/E1 Link Summary LED color.
1.3.6.1.4.1.25651.1.2.4.2.3.3.1Led4ColorTread-onlycurrent
locTE1Alarms
OBJECT-TYPE
The Local T1/E1 Interface Alarms.
1.3.6.1.4.1.25651.1.2.4.2.3.3.2not-accessiblecurrent
locTe1AlarmsEntry
OBJECT-TYPE
T1/E1 Alarms table Entry.
1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1not-accessiblecurrent
locTe1Alarm
OBJECT-TYPE
The Alarms state for the Local T1/E1 Channel. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no connection present - almDisable(3) - Disabled and no connection present - almNotAvailable(4) - T1/E1 channel is not available See Web, Monitor, Alarms, T1/E1 Input
1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1.1AlarmLevelTread-onlycurrent
almRemote
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.4
remSysAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.4.1
remLinkState
OBJECT-TYPE
The Link Status Alarm for far end radio. Possible values: - almNORMAL(0) - Error-free connection (BER<10e-6) - almMINOR(1) - Errorred connection (BER<10e-3) - almMAJOR(2) - No link (BER>10e-3) - almNotAvailable(4) - Telemetry is down See Web, Monitor, Alarms, Link
1.3.6.1.4.1.25651.1.2.4.2.4.1.1AlarmLevelTread-onlycurrent
remTempAlarm
OBJECT-TYPE
The Temperature Alarm state for far end radio. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range - almNotAvailable(4) - Telemetry is down See Web, Monitor, Alarms, Temperature
1.3.6.1.4.1.25651.1.2.4.2.4.1.2AlarmLevelTread-onlycurrent
remCurrentTemp
OBJECT-TYPE
The Internal Temperature in Celsius for far end radio.
1.3.6.1.4.1.25651.1.2.4.2.4.1.3Integer32read-onlycurrent
remCurrentTempS
OBJECT-TYPE
The internal Temperature as a string for far end radio.
1.3.6.1.4.1.25651.1.2.4.2.4.1.4DisplayStringread-onlycurrent
remLinkSecMismatch
OBJECT-TYPE
This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match - almMAJOR(2) - Link Secutiry keys do not match - almNotAvailable(4) - Telemetry is down
1.3.6.1.4.1.25651.1.2.4.2.4.1.9AlarmLevelTread-onlycurrent
remLinkStateV
OBJECT-TYPE
Vertical Link Status Alarm. -<g89><>
1.3.6.1.4.1.25651.1.2.4.2.4.1.15AlarmLevelTread-onlycurrent
remLinkStateH
OBJECT-TYPE
Horizontal Link Status Alarm. -<g89><>
1.3.6.1.4.1.25651.1.2.4.2.4.1.16AlarmLevelTread-onlycurrent
remEthAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.4.2
remTe1Alarms
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.2.4.3
remTe1LinkSummary
OBJECT-TYPE
The T1/E1 Link Summary LED color.
1.3.6.1.4.1.25651.1.2.4.2.4.3.1Led4ColorTread-onlycurrent
remTE1Alarms
OBJECT-TYPE
The Remotel T1/E1 Interface Alarms.
1.3.6.1.4.1.25651.1.2.4.2.4.3.2not-accessiblecurrent
remTe1AlarmsEntry
OBJECT-TYPE
T1/E1 Alarms table Entry.
1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1not-accessiblecurrent
remTe1Alarm
OBJECT-TYPE
The Alarms state for the Local T1/E1 Channel of far end radio. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no connection present - almDisable(3) - Disabled and no connection present - almNotAvailable(4) - Telemetry is down or T1/E1 channel is not available See Web, Monitor, Alarms, T1/E1 Input
1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1.1AlarmLevelTread-onlycurrent
performance
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.3
perfLocal
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.3.1
locCurrentBER
OBJECT-TYPE
The Curent Bit-Error Rate as scaled integer for local radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. See Web, Monitor, Performance, Current BER
1.3.6.1.4.1.25651.1.2.4.3.1.1Integer32read-onlycurrent
locCurrentBERstr
OBJECT-TYPE
The Current Bit-Error Rate as a string.
1.3.6.1.4.1.25651.1.2.4.3.1.2DisplayStringread-onlycurrent
locCurrentRSL
OBJECT-TYPE
Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect until the RSL is above the threshold specification. See Web, Monitor, Performance, Current RSL
1.3.6.1.4.1.25651.1.2.4.3.1.3Integer32read-onlycurrent
locCurrentRSLstr
OBJECT-TYPE
The Current RSL as a string.
1.3.6.1.4.1.25651.1.2.4.3.1.4DisplayStringread-onlycurrent
locErrorDuration
OBJECT-TYPE
The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics counter was reset. See Web, Monitor, Performance, Errored Seconds
1.3.6.1.4.1.25651.1.2.4.3.1.5Integer32read-onlycurrent
locErrorDurationStr
OBJECT-TYPE
The Error Duration as a formatted string.
1.3.6.1.4.1.25651.1.2.4.3.1.6DisplayStringread-onlycurrent
locUnavailDuration
OBJECT-TYPE
Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communication. See Web, Monitor, Performance, Unavailable Seconds
1.3.6.1.4.1.25651.1.2.4.3.1.7Integer32read-onlycurrent
locUnavailDurationStr
OBJECT-TYPE
The Unavailable Duration as a formatted string.
1.3.6.1.4.1.25651.1.2.4.3.1.8DisplayStringread-onlycurrent
locMinRSL
OBJECT-TYPE
The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL
1.3.6.1.4.1.25651.1.2.4.3.1.9Integer32read-onlycurrent
locMinRSLstr
OBJECT-TYPE
The Minimum RSL value as a string.
1.3.6.1.4.1.25651.1.2.4.3.1.10DisplayStringread-onlycurrent
locMinRSLtimestamp
OBJECT-TYPE
The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp
1.3.6.1.4.1.25651.1.2.4.3.1.11DisplayStringread-onlycurrent
locMaxRSL
OBJECT-TYPE
The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL
1.3.6.1.4.1.25651.1.2.4.3.1.12Integer32read-onlycurrent
locMaxRSLstr
OBJECT-TYPE
The Maximum RSL level As string.
1.3.6.1.4.1.25651.1.2.4.3.1.13DisplayStringread-onlycurrent
locSampleDuration
OBJECT-TYPE
The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset
1.3.6.1.4.1.25651.1.2.4.3.1.14Integer32read-onlycurrent
locSampleDurationStr
OBJECT-TYPE
The Sample Duration value as a formatted string.
1.3.6.1.4.1.25651.1.2.4.3.1.15DisplayStringread-onlycurrent
locEthPerfInterfaces
OBJECT-TYPE
Performance characteristics of local Ethernet interfaces
1.3.6.1.4.1.25651.1.2.4.3.1.16not-accessiblecurrent
locEthPerfInterfacesEntry
OBJECT-TYPE
An entry in the Performance characteristics of local Ethernet interfaces table
1.3.6.1.4.1.25651.1.2.4.3.1.16.1not-accessiblecurrent
locEthUtilizationIn
OBJECT-TYPE
Inbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization.
1.3.6.1.4.1.25651.1.2.4.3.1.16.1.1Integer32 (0..100)read-onlycurrent
locEthUtilizationOut
OBJECT-TYPE
Outbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization.
1.3.6.1.4.1.25651.1.2.4.3.1.16.1.2Integer32 (0..100)read-onlycurrent
locEthSpeed
OBJECT-TYPE
Current Ethernet Speed. See Web, Monitor, Ethernet Performance.
1.3.6.1.4.1.25651.1.2.4.3.1.16.1.3DisplayStringread-onlycurrent
locEthUtilizationWatermarkEnabled
OBJECT-TYPE
Ethernet utilization watermark enable(1)/disable(0). See Web, Analysis, Ethernet Utilization, Ethernet Utilization Watermark.
1.3.6.1.4.1.25651.1.2.4.3.1.17ExaltEnableTread-writecurrent
locEthUtilizationWatermark
OBJECT-TYPE
Ethernet utilization watermark level (%). See Web, Analysis, Ethernet Utilization, Watermark level.
1.3.6.1.4.1.25651.1.2.4.3.1.18Integer32 (0..100)read-writecurrent
locEthUtilizationWatermarkTrapEnabled
OBJECT-TYPE
Ethernet utilization watermark trap enable(1)/disable(0). The watermark trap function allows administrators to receive an SNMP trap when watermark conditions are exceeded. See Web, Analysis, Ethernet Utilization, Enable Ethernet Utilization Trap.
1.3.6.1.4.1.25651.1.2.4.3.1.19ExaltEnableTread-writecurrent
locEthUtilizationWatermarkTrapDuration
OBJECT-TYPE
Ethernet utilization trap limit in minutes/day (0-1440 minutes). See Web, Analysis, Ethernet Utilization, Send trap if watermark hit duration exceeds.
1.3.6.1.4.1.25651.1.2.4.3.1.20Integer32 (0..1440)read-writecurrent
locMaximumTxModulation
OBJECT-TYPE
The highest/maximum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation.
1.3.6.1.4.1.25651.1.2.4.3.1.100AcmModulationTread-onlycurrent
locActiveTxModulation
OBJECT-TYPE
The active Tx modulation when ACM is enabled. See Web, Monitor, Performance, Tx modulation.
1.3.6.1.4.1.25651.1.2.4.3.1.101AcmModulationTread-onlycurrent
locMinimumTxModulation
OBJECT-TYPE
The lowest/minimum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation.
1.3.6.1.4.1.25651.1.2.4.3.1.102AcmModulationTread-onlycurrent
locMaximumRxModulation
OBJECT-TYPE
The highest/maximum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation.
1.3.6.1.4.1.25651.1.2.4.3.1.103AcmModulationTread-onlycurrent
locActiveRxModulation
OBJECT-TYPE
The active Rx modulation when ACM is enabled. See Web, Monitor, Performance, Rx modulation.
1.3.6.1.4.1.25651.1.2.4.3.1.104AcmModulationTread-onlycurrent
locMinimumRxModulation
OBJECT-TYPE
The lowest/minimum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation.
1.3.6.1.4.1.25651.1.2.4.3.1.105AcmModulationTread-onlycurrent
locMaximumTxEthernetThroughput
OBJECT-TYPE
The highest/maximum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput.
1.3.6.1.4.1.25651.1.2.4.3.1.106INTEGERread-onlycurrent
locActiveTxEthernetThroughput
OBJECT-TYPE
The active Tx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Tx Ethernet Throughput.
1.3.6.1.4.1.25651.1.2.4.3.1.107INTEGERread-onlycurrent
locMinimumTxEthernetThroughput
OBJECT-TYPE
The lowest/minimum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput.
1.3.6.1.4.1.25651.1.2.4.3.1.108INTEGERread-onlycurrent
locMaximumRxEthernetThroughput
OBJECT-TYPE
The highest/maximum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput.
1.3.6.1.4.1.25651.1.2.4.3.1.109INTEGERread-onlycurrent
locActiveRxEthernetThroughput
OBJECT-TYPE
The active Rx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Rx Ethernet Throughput.
1.3.6.1.4.1.25651.1.2.4.3.1.110INTEGERread-onlycurrent
locMinimumRxEthernetThroughput
OBJECT-TYPE
The lowest/minimum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput.
1.3.6.1.4.1.25651.1.2.4.3.1.111INTEGERread-onlycurrent
locResetStats
OBJECT-TYPE
Write 'reset' to locResetStats to clear the Performance statistics.
1.3.6.1.4.1.25651.1.2.4.3.1.1000DisplayStringread-writecurrent
perfRemote
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.3.2
remCurrentBER
OBJECT-TYPE
The Curent Bit-Error Rate as scaled integer for far end radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. See Web, Monitor, Performance, Current BER
1.3.6.1.4.1.25651.1.2.4.3.2.1Integer32read-onlycurrent
remCurrentBERstr
OBJECT-TYPE
The Current Bit-Error Rate as a string. Far end radio
1.3.6.1.4.1.25651.1.2.4.3.2.2DisplayStringread-onlycurrent
remCurrentRSL
OBJECT-TYPE
Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect until the RSL is above the threshold specification. See Web, Monitor, Performance, Current RSL
1.3.6.1.4.1.25651.1.2.4.3.2.3Integer32read-onlycurrent
remCurrentRSLstr
OBJECT-TYPE
The Current RSL as a string.
1.3.6.1.4.1.25651.1.2.4.3.2.4DisplayStringread-onlycurrent
remErrorDuration
OBJECT-TYPE
The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics counter was reset. See Web, Monitor, Performance, Errored Seconds, Remote column.
1.3.6.1.4.1.25651.1.2.4.3.2.5Integer32read-onlycurrent
remErrorDurationStr
OBJECT-TYPE
The Error Duration as a formatted string. Far end radio.
1.3.6.1.4.1.25651.1.2.4.3.2.6DisplayStringread-onlycurrent
remUnavailDuration
OBJECT-TYPE
Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communication. See Web, Monitor, Performance, Unavailable Seconds
1.3.6.1.4.1.25651.1.2.4.3.2.7Integer32read-onlycurrent
remUnavailDurationStr
OBJECT-TYPE
The Unavailable Duration as a formatted string. Far end radio.
1.3.6.1.4.1.25651.1.2.4.3.2.8DisplayStringread-onlycurrent
remMinRSL
OBJECT-TYPE
The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL, Remote column.
1.3.6.1.4.1.25651.1.2.4.3.2.9Integer32read-onlycurrent
remMinRSLstr
OBJECT-TYPE
The Minimum RSL value as a string. Far end radio.
1.3.6.1.4.1.25651.1.2.4.3.2.10DisplayStringread-onlycurrent
remMinRSLtimestamp
OBJECT-TYPE
The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp, Remote column.
1.3.6.1.4.1.25651.1.2.4.3.2.11DisplayStringread-onlycurrent
remMaxRSL
OBJECT-TYPE
The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL, Remote column.
1.3.6.1.4.1.25651.1.2.4.3.2.12Integer32read-onlycurrent
remMaxRSLstr
OBJECT-TYPE
The Maximum RSL level As string. Far end radio.
1.3.6.1.4.1.25651.1.2.4.3.2.13DisplayStringread-onlycurrent
remSampleDuration
OBJECT-TYPE
The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset, Remote column.
1.3.6.1.4.1.25651.1.2.4.3.2.14Integer32read-onlycurrent
remSampleDurationStr
OBJECT-TYPE
The Sample Duration value as a formatted string. Far end radio.
1.3.6.1.4.1.25651.1.2.4.3.2.15DisplayStringread-onlycurrent
remResetStats
OBJECT-TYPE
Write 'reset' to remResetStats to clear the Performance statistics.
1.3.6.1.4.1.25651.1.2.4.3.2.1000DisplayStringread-writecurrent
userThroughput
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.2.4.5
aggregateUserThroughput
OBJECT-TYPE
Aggregated User Throughput. For FDD radios this parameter is always equal to fullDuplexEthernetThroughput.
1.3.6.1.4.1.25651.1.2.4.5.1DisplayStringread-onlycurrent
inboundEthernetThroughput
OBJECT-TYPE
Inbound Ethernet Throughput. For FDD radios this parameter is always N/A.
1.3.6.1.4.1.25651.1.2.4.5.2DisplayStringread-onlycurrent
outboundEthernetThroughput
OBJECT-TYPE
Outbound Ethernet Throughput. For FDD radios this parameter is always N/A.
1.3.6.1.4.1.25651.1.2.4.5.3DisplayStringread-onlycurrent
fullDuplexEthernetThroughput
OBJECT-TYPE
The Full Duplex Ethernet Throughput is determined by the combination of settings for Mode and Bandwidth. See Web, Monitor, User Throughput, Full Duplex Ethernet Throughput.
1.3.6.1.4.1.25651.1.2.4.5.4DisplayStringread-onlycurrent
radioReboot
OBJECT-TYPE
Reboot the radio device. Send 'reboot' to radioReboot parameter to reboot the radio device.
1.3.6.1.4.1.25651.1.2.1000DisplayString (SIZE(0..100))read-writecurrent
productsMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.3
productsMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.3.1
productsMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.25651.1.3.2

Conformance

NameOIDStatus
productsAllObjects
OBJECT-GROUP
This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP
1.3.6.1.4.1.25651.1.3.2.1current