MIBs Depot

PACKET-VX-BRIDGE-MIB

Registered at
1.3.6.1.4.1.18070.1.5
1.3.6.1.4.1.18070.2.2.1.14.2
1.3.6.1.4.1.18070.2.2.1.14.3
1.3.6.1.4.1.18070.2.2.1.14.5
1.3.6.1.4.1.18070.2.2.2.1.36
1.3.6.1.4.1.18070.2.2.2.1.37
1.3.6.1.4.1.18070.2.2.2.1.38
1.3.6.1.4.1.18070.2.2.2.1.39
Last updated
2012-12-20 12:00
Organization
BTI Systems Inc.
Revisions
2012-12-20 12:00, 2012-12-06 12:00, 2012-06-20 12:00, 2012-02-10 12:00, 2011-06-23 12:00, 2010-08-06 12:00, 2010-06-18 12:00, 2010-02-12 12:00, 2008-12-19 12:00, 2008-03-10 12:00
Namespace
bti
Source file
PACKET-VX-BRIDGE-MIB
Digest
sha256:9c33d3ce37ee33bbc27a7ace97a37f99959e73eed4ffe1635164d484b1bfbdc6

Description

The external MIB definitions for the PacketVX Module on the BTI 7000 series products.

Contact

Technical Support BTI Systems Inc. 200-1000 Innovation Drive Ottawa, Ontario, Canada K2K 3E7 (613) 287-1700 support@btisystems.com

Imports

FromSymbols
BTI-7000-MIBcondCodeType, condDateAndTime, condDescription, condObjectType, condReportType, condServiceAffecting, condSeverity, erpsCondNotifications, eventNotifications, evtCodeType, evtDateAndTime, evtDescription, evtObjectType, lagCondNotifications, mstpCondNotifications, mstpEvtNotifications, mstpNotificationObjects, performance, pvxBridge, pvxERPSSrvcEvtNotifications, pvxERPSSrvcNNIEvtNotifications, pvxESrvcBWPrflEvtNotifications, pvxESrvcEvtNotifications, pvxL2IntfPortIdx, pvxL2IntfPortTypeIdx, pvxL2IntfShelfIdx, pvxL2IntfSlotIdx, pvxL2IntfSubPortNumber, pvxL2IntfSwitchIdx, pvxObjects, pvxSUniEvtNotifications, pvxSlaMsmtEvtNotifications, swMemberCondNotifications, tcaDateAndTime, tcaMontype, tcaThreshold, tcaValue, trapSeqNum
BTI-MIBbtiModules
BTI-TC-MIBAdminStatus, CirTestResult, CommandStateType, CondReportType, CondServiceAffecting, CondSeverity, FixedX100, FixedX1000, InetAddress, InetAddressType, InitializeCmd, MonitorPeriodType, OperStatus, PMIntervalType, PMValidity, PmTestCmdState, ProfileNameType, ProtocolActionType, PvxPortType, SlaTestRole, SwitchIdxType, Unsigned64
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BTI-7000-MIB
BTI-MIB
BTI-TC-MIB
PACKET-VX-BRIDGE-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PvxCVidMapOperStatus
TEXTUAL-CONVENTION
current
PvxESrvcBWPrflPMThresholdLevelType
TEXTUAL-CONVENTION
The type of threshold level used to generate threshold crossing alerts against perEVC and perCoS instances.
current
PvxEcfmConfigErrors
TEXTUAL-CONVENTION
While making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possible errors that can be encountered: CFMleak(0) MA x is associated with a specific VID list, one or more of the VIDs in MA x can pass through the Bridge Port, no Down MEP is configured on any Bridge Port for MA x, and some other MA y, at a higher MD Level than MA x, and associated with at least one of the VID(s) also in MA x, does have a MEP configured on the Bridge Port. conflictingVids(1) MA x is associated with a specific VID list, an Up MEP is configured on MA x on the Bridge Port, and some other MA y, associated with at least one of the VID(s) also in MA x, also has an Up MEP configured on some Bridge Port. ExcessiveLevels(2) The number of different MD Levels at which MIPs are to be created on this port exceeds the Bridge's capabilities (see subclause 22.3). OverlappedLevels(3) A MEP is created for one VID at one MD Level, but a MEP is configured on another VID at that MD Level or higher, exceeding the Bridge's capabilities.
current
PvxEcfmEgressActionFieldValue
TEXTUAL-CONVENTION
Possible values returned in the egress action field.
current
PvxEcfmIngressActionFieldValue
TEXTUAL-CONVENTION
Possible values returned in the ingress action field.
current
PvxEcfmMepDefects
TEXTUAL-CONVENTION
A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: remoteMepDefect(1) A remote MEP is reported the RDI bit in its last CCM. macStatusDefect(2) Either some remote MEP is reporting its Interface Status TLV as not isUp, or all remote MEPs are reporting a Port Status TLV that contains some value other than psUp. remoteCCMDefect(3) The MEP is not receiving valid CCMs from at least one of the remote MEPs. errorCCMDefect(4) The MEP has received at least one invalid CCM whose CCM Interval has not yet timed out. xConnCCMDefect(5) The MEP has received at least one CCM from either another MAID or a lower MD Level whose CCM Interval has not yet timed out.
current
PvxEcfmRelayActionFieldValue
TEXTUAL-CONVENTION
Possible values the Relay action field can take.
current
PvxEcfmRemoteMepState
TEXTUAL-CONVENTION
Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated by the dot1agCfmMaCcmInterval object. rMepIdle(1) Momentary state during reset. rMepStart(2) The timer has not expired since the state machine was reset, and no valid CCM has yet been received. rMepFailed(3) The timer has expired, both since the state machine was reset, and since a valid CCM was received. rMepOk(4) The timer has not expired since a valid CCM was received.
current
PvxEcfmTransmitStatus
TEXTUAL-CONVENTION
An enumerated value indicates whether LBM or LTM trasmission can be initiated. ready(1) Indicates LTM or LBM transmission can be initiated. notReady(2) Indicates LTM or LBM transmission can not be initiated. transmit(3) To initiate the transmission of LBM or LTM. NOTE: A 2 value is used to initiate LBM or LTM transmission.
current
PvxL2Port
TEXTUAL-CONVENTION
Port list in the format of switch/shelf/slot/porttype/portNum. switch: 1 - 11 shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
current
PvxL2PortList
TEXTUAL-CONVENTION
Port list in the format of switch/shelf/slot/porttype/portNum. switch: 1 - 11 shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
current
PvxMSTPVlanList
TEXTUAL-CONVENTION
a binary string representation
current
PvxPCPDecodingList
TEXTUAL-CONVENTION
A 12-bit VLAN ID used in the VLAN Tag header.
current
PvxPhyPort
TEXTUAL-CONVENTION
Port list in the format of shelf/slot/porttype/portNum. shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
current
PvxPhyPortList
TEXTUAL-CONVENTION
Port list in the format of shelf/slot/porttype/portNum. shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
current
PvxPolicyDropAction
TEXTUAL-CONVENTION
Policy drop action definiiton.
current
PvxQoSColorMode
TEXTUAL-CONVENTION
Color aware action definiiton.
current
PvxQoSPmCounterMode
TEXTUAL-CONVENTION
Counter mode for policy action definiiton.
current
PvxStackingPortCommState
TEXTUAL-CONVENTION
Virtual switch stacking port communication state values.
current
PvxVLANPortList
TEXTUAL-CONVENTION
Port list in the format of shelf/slot{ports}. for example: L{1,4};1/1{g2,g6,x1} or: 11/3{g1,g2,g3,x2} The sub-list indicated by L indicates the LAG ports. The sub-list indicated by the shelf/slot pair contains entries for the non-lag ports. They are qualified by g for gigabit ports and x for ten-gigabit ports.
current
PvxVlanId
TEXTUAL-CONVENTION
A 12-bit VLAN ID used in the VLAN Tag header.
current
PvxY1731MepDefects
TEXTUAL-CONVENTION
A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects conditions are: remoteMepDefectCondition (1) The MEP has encountered remote MEP defect condition. lossOfContinuity (2) The MEP has encountered loss of continuity defect condition. bDefUnexpectedPeriod (3) The MEP has encountered unexpected period defect condition. unexpectedPeriod (4) The MEP has encountered unexpected MEP defect condition. misMerge (5) The MEP has encountered mismerge defect condition. unexpectedMegLevel (6) The MEP has encountered unexpected MEG level defect condition. localLinkFailure (7) The MEP has encountered local link failure defect condition. internalHWFailure (8) The MEP has encountered internal hardware failure defect condition. internalSWFailure (9) The MEP has encountered internal software failure defect condition. aisCondition(10) The MEP has encountered alarm indication defect condition. lckCondition(11) The MEP has encountered locked defect condition.
current

Objects

NameOIDSyntaxAccessStatus
pvxMSTPCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for the PacketVX switch-level MSTP and MSTP instance objects.
1.3.6.1.4.1.18070.2.2.1.6.32not-accessiblecurrent
pvxMSTPCrntPMEntry
OBJECT-TYPE
The row entry object of the PacketVX MSTP current performance monitoring table. Each row of this table contains a full set of MSTP PM statistics and related data for a current measurement interval for a given PVX switch or MSTP instance.
1.3.6.1.4.1.18070.2.2.1.6.32.1not-accessiblecurrent
pvxMSTPCrntPMSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.6.32.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPCrntPMXstIdx
OBJECT-TYPE
The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.32.1.2INTEGER (0..64)not-accessiblecurrent
pvxMSTPCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.32.1.3PMIntervalTypenot-accessiblecurrent
pvxMSTPCrntPMRCCCValue
OBJECT-TYPE
The CIST region configuration change count. This object applies only to the global MSTP object on the switch.
1.3.6.1.4.1.18070.2.2.1.6.32.1.4Unsigned64read-onlycurrent
pvxMSTPCrntPMRCCCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.5DateAndTimeread-onlycurrent
pvxMSTPCrntPMRCCCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.6PMValidityread-onlycurrent
pvxMSTPCrntPMRCCCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPCrntPMRCCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.32.1.7InitializeCmdread-writecurrent
pvxMSTPCrntPMTCCValue
OBJECT-TYPE
The CIST/MSTI region configuration change count.
1.3.6.1.4.1.18070.2.2.1.6.32.1.8Unsigned64read-onlycurrent
pvxMSTPCrntPMTCCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.9DateAndTimeread-onlycurrent
pvxMSTPCrntPMTCCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.10PMValidityread-onlycurrent
pvxMSTPCrntPMTCCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPCrntPMTCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.32.1.11InitializeCmdread-writecurrent
pvxMSTPCrntPMNRBCValue
OBJECT-TYPE
The CIST/MSTI new root bridge count.
1.3.6.1.4.1.18070.2.2.1.6.32.1.12Unsigned64read-onlycurrent
pvxMSTPCrntPMNRBCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.13DateAndTimeread-onlycurrent
pvxMSTPCrntPMNRBCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.14PMValidityread-onlycurrent
pvxMSTPCrntPMNRBCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPCrntPMNRBCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.32.1.15InitializeCmdread-writecurrent
pvxMSTPHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for the PacketVX switch-level MSTP and MSTP instance objects.
1.3.6.1.4.1.18070.2.2.1.6.33not-accessiblecurrent
pvxMSTPHistPMEntry
OBJECT-TYPE
The row entry object of the PacketVX MSTP current performance monitoring table. Each row of this table contains a full set of MSTP PM statistics and related data for a historical measurement interval for a given PVX switch or MSTP instance.
1.3.6.1.4.1.18070.2.2.1.6.33.1not-accessiblecurrent
pvxMSTPHistPMSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.6.33.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPHistPMXstIdx
OBJECT-TYPE
The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.33.1.2INTEGER (0..64)not-accessiblecurrent
pvxMSTPHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.33.1.3PMIntervalTypenot-accessiblecurrent
pvxMSTPHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.33.1.4INTEGER (1..96)not-accessiblecurrent
pvxMSTPHistPMRCCCValue
OBJECT-TYPE
The CIST region configuration change count. This object applies only to the global MSTP object on the switch.
1.3.6.1.4.1.18070.2.2.1.6.33.1.5Unsigned64read-onlycurrent
pvxMSTPHistPMRCCCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.6DateAndTimeread-onlycurrent
pvxMSTPHistPMRCCCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.7PMValidityread-onlycurrent
pvxMSTPHistPMRCCCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPHistPMRCCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.33.1.8InitializeCmdread-writecurrent
pvxMSTPHistPMTCCValue
OBJECT-TYPE
The CIST/MSTI region configuration change count.
1.3.6.1.4.1.18070.2.2.1.6.33.1.9Unsigned64read-onlycurrent
pvxMSTPHistPMTCCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.10DateAndTimeread-onlycurrent
pvxMSTPHistPMTCCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.11PMValidityread-onlycurrent
pvxMSTPHistPMTCCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPHistPMTCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.33.1.12InitializeCmdread-writecurrent
pvxMSTPHistPMNRBCValue
OBJECT-TYPE
The CIST/MSTI new root bridge count.
1.3.6.1.4.1.18070.2.2.1.6.33.1.13Unsigned64read-onlycurrent
pvxMSTPHistPMNRBCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.14DateAndTimeread-onlycurrent
pvxMSTPHistPMNRBCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.15PMValidityread-onlycurrent
pvxMSTPHistPMNRBCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPHistPMNRBCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.33.1.16InitializeCmdread-writecurrent
pvxMSTPPortCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for PacketVX MSTP Port and MSTP Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34not-accessiblecurrent
pvxMSTPPortCrntPMEntry
OBJECT-TYPE
The row entry object of the PacketVX MSTP Port current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given PVX MSTP Port or MSTP Instance Port.
1.3.6.1.4.1.18070.2.2.1.6.34.1not-accessiblecurrent
pvxMSTPPortCrntPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the MSTP Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.34.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPPortCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the MSTP Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxMSTPPortCrntPMSlotIdx
OBJECT-TYPE
The number of the slot within which the MSTP Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxMSTPPortCrntPMTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the MSTP Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.34.1.4PvxPortTypenot-accessiblecurrent
pvxMSTPPortCrntPMXstIdx
OBJECT-TYPE
The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.5INTEGER (0..64)not-accessiblecurrent
pvxMSTPPortCrntPMIdx
OBJECT-TYPE
The number of the port of the identified type on which the PVX MSTP Port facility targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.34.1.6INTEGER (1..24)not-accessiblecurrent
pvxMSTPPortCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.34.1.7PMIntervalTypenot-accessiblecurrent
pvxMSTPPortCrntPMFWDTRValue
OBJECT-TYPE
The CIST/MSTI number of forward transitions.
1.3.6.1.4.1.18070.2.2.1.6.34.1.8Unsigned64read-onlycurrent
pvxMSTPPortCrntPMFWDTRTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.9DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMFWDTRValidity
OBJECT-TYPE
Indicates the validity of the provided CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.10PMValidityread-onlycurrent
pvxMSTPPortCrntPMFWDTRInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMFWDTRValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.11InitializeCmdread-writecurrent
pvxMSTPPortCrntPMPMCValue
OBJECT-TYPE
The CIST protocol migration count. This object applies only to the global MSTP Port objects on the switch.
1.3.6.1.4.1.18070.2.2.1.6.34.1.12Unsigned64read-onlycurrent
pvxMSTPPortCrntPMPMCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.13DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMPMCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.14PMValidityread-onlycurrent
pvxMSTPPortCrntPMPMCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMPMCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.15InitializeCmdread-writecurrent
pvxMSTPPortCrntPMBPDURXValue
OBJECT-TYPE
The number of bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.34.1.16Unsigned64read-onlycurrent
pvxMSTPPortCrntPMBPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.17DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMBPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.18PMValidityread-onlycurrent
pvxMSTPPortCrntPMBPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.19InitializeCmdread-writecurrent
pvxMSTPPortCrntPMBPDUTXValue
OBJECT-TYPE
The number of bridging protocol data units transmitted.
1.3.6.1.4.1.18070.2.2.1.6.34.1.20Unsigned64read-onlycurrent
pvxMSTPPortCrntPMBPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.21DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMBPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.22PMValidityread-onlycurrent
pvxMSTPPortCrntPMBPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMBPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.23InitializeCmdread-writecurrent
pvxMSTPPortCrntPMBPDUCFGRXValue
OBJECT-TYPE
The number of configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.24Unsigned64read-onlycurrent
pvxMSTPPortCrntPMBPDUCFGRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.25DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMBPDUCFGRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.26PMValidityread-onlycurrent
pvxMSTPPortCrntPMBPDUCFGRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.27InitializeCmdread-writecurrent
pvxMSTPPortCrntPMBPDUCFGTXValue
OBJECT-TYPE
The number of configuration bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.28Unsigned64read-onlycurrent
pvxMSTPPortCrntPMBPDUCFGTXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.29DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMBPDUCFGTXValidity
OBJECT-TYPE
Indicates the validity of the provided number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.30PMValidityread-onlycurrent
pvxMSTPPortCrntPMBPDUCFGTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMBPDUCFGTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.31InitializeCmdread-writecurrent
pvxMSTPPortCrntPMBPDUTCNRXValue
OBJECT-TYPE
The number of topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.32Unsigned64read-onlycurrent
pvxMSTPPortCrntPMBPDUTCNRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.33DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMBPDUTCNRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.34PMValidityread-onlycurrent
pvxMSTPPortCrntPMBPDUTCNRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.35InitializeCmdread-writecurrent
pvxMSTPPortCrntPMBPDUTCNTXValue
OBJECT-TYPE
The number of topology change notifications bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.36Unsigned64read-onlycurrent
pvxMSTPPortCrntPMBPDUTCNTXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.37DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMBPDUTCNTXValidity
OBJECT-TYPE
Indicates the validity of the provided number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.38PMValidityread-onlycurrent
pvxMSTPPortCrntPMBPDUTCNTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMBPDUTCNTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.39InitializeCmdread-writecurrent
pvxMSTPPortCrntPMINVBPDURXValue
OBJECT-TYPE
The number of invalid bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.34.1.40Unsigned64read-onlycurrent
pvxMSTPPortCrntPMINVBPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.41DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMINVBPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.42PMValidityread-onlycurrent
pvxMSTPPortCrntPMINVBPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.43InitializeCmdread-writecurrent
pvxMSTPPortCrntPMINVBPDUCFGRXValue
OBJECT-TYPE
The number of invalid configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.44Unsigned64read-onlycurrent
pvxMSTPPortCrntPMINVBPDUCFGRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.45DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMINVBPDUCFGRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.46PMValidityread-onlycurrent
pvxMSTPPortCrntPMINVBPDUCFGRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMINVBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.47InitializeCmdread-writecurrent
pvxMSTPPortCrntPMINVBPDUTCNRXValue
OBJECT-TYPE
The number of invalid topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.48Unsigned64read-onlycurrent
pvxMSTPPortCrntPMINVBPDUTCNRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.49DateAndTimeread-onlycurrent
pvxMSTPPortCrntPMINVBPDUTCNRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.50PMValidityread-onlycurrent
pvxMSTPPortCrntPMINVBPDUTCNRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortCrntPMINVBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.51InitializeCmdread-writecurrent
pvxMSTPPortHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for PacketVX MSTP Port and MSTP Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35not-accessiblecurrent
pvxMSTPPortHistPMEntry
OBJECT-TYPE
The row entry object of the PacketVX MSTP Port historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given PVX MSTP Port or MSTP Instance Port.
1.3.6.1.4.1.18070.2.2.1.6.35.1not-accessiblecurrent
pvxMSTPPortHistPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the MSTP Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.35.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPPortHistPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the MSTP Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxMSTPPortHistPMSlotIdx
OBJECT-TYPE
The number of the slot within which the MSTP Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxMSTPPortHistPMTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the MSTP Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.35.1.4PvxPortTypenot-accessiblecurrent
pvxMSTPPortHistPMXstIdx
OBJECT-TYPE
The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.5INTEGER (0..64)not-accessiblecurrent
pvxMSTPPortHistPMIdx
OBJECT-TYPE
The number of the port of the identified type on which the PVX MSTP Port facility targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.35.1.6INTEGER (1..24)not-accessiblecurrent
pvxMSTPPortHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.35.1.7PMIntervalTypenot-accessiblecurrent
pvxMSTPPortHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.35.1.8INTEGER (1..96)not-accessiblecurrent
pvxMSTPPortHistPMFWDTRValue
OBJECT-TYPE
The CIST/MSTI number of forward transitions.
1.3.6.1.4.1.18070.2.2.1.6.35.1.9Unsigned64read-onlycurrent
pvxMSTPPortHistPMFWDTRTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.10DateAndTimeread-onlycurrent
pvxMSTPPortHistPMFWDTRValidity
OBJECT-TYPE
Indicates the validity of the provided CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.11PMValidityread-onlycurrent
pvxMSTPPortHistPMFWDTRInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMFWDTRValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.12InitializeCmdread-writecurrent
pvxMSTPPortHistPMPMCValue
OBJECT-TYPE
The CIST protocol migration count. This object applies only to the global MSTP Port objects on the switch.
1.3.6.1.4.1.18070.2.2.1.6.35.1.13Unsigned64read-onlycurrent
pvxMSTPPortHistPMPMCTimeStamp
OBJECT-TYPE
The date and time stamp of the CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.14DateAndTimeread-onlycurrent
pvxMSTPPortHistPMPMCValidity
OBJECT-TYPE
Indicates the validity of the provided CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.15PMValidityread-onlycurrent
pvxMSTPPortHistPMPMCInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMPMCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.16InitializeCmdread-writecurrent
pvxMSTPPortHistPMBPDURXValue
OBJECT-TYPE
The number of bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.35.1.17Unsigned64read-onlycurrent
pvxMSTPPortHistPMBPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.18DateAndTimeread-onlycurrent
pvxMSTPPortHistPMBPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.19PMValidityread-onlycurrent
pvxMSTPPortHistPMBPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.20InitializeCmdread-writecurrent
pvxMSTPPortHistPMBPDUTXValue
OBJECT-TYPE
The number of bridging protocol data units transmitted.
1.3.6.1.4.1.18070.2.2.1.6.35.1.21Unsigned64read-onlycurrent
pvxMSTPPortHistPMBPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.22DateAndTimeread-onlycurrent
pvxMSTPPortHistPMBPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.23PMValidityread-onlycurrent
pvxMSTPPortHistPMBPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMBPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.24InitializeCmdread-writecurrent
pvxMSTPPortHistPMBPDUCFGRXValue
OBJECT-TYPE
The number of configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.25Unsigned64read-onlycurrent
pvxMSTPPortHistPMBPDUCFGRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.26DateAndTimeread-onlycurrent
pvxMSTPPortHistPMBPDUCFGRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.27PMValidityread-onlycurrent
pvxMSTPPortHistPMBPDUCFGRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.28InitializeCmdread-writecurrent
pvxMSTPPortHistPMBPDUCFGTXValue
OBJECT-TYPE
The number of configuration bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.29Unsigned64read-onlycurrent
pvxMSTPPortHistPMBPDUCFGTXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.30DateAndTimeread-onlycurrent
pvxMSTPPortHistPMBPDUCFGTXValidity
OBJECT-TYPE
Indicates the validity of the provided number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.31PMValidityread-onlycurrent
pvxMSTPPortHistPMBPDUCFGTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMBPDUCFGTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.32InitializeCmdread-writecurrent
pvxMSTPPortHistPMBPDUTCNRXValue
OBJECT-TYPE
The number of topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.33Unsigned64read-onlycurrent
pvxMSTPPortHistPMBPDUTCNRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.34DateAndTimeread-onlycurrent
pvxMSTPPortHistPMBPDUTCNRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.35PMValidityread-onlycurrent
pvxMSTPPortHistPMBPDUTCNRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.36InitializeCmdread-writecurrent
pvxMSTPPortHistPMBPDUTCNTXValue
OBJECT-TYPE
The number of topology change notifications bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.37Unsigned64read-onlycurrent
pvxMSTPPortHistPMBPDUTCNTXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.38DateAndTimeread-onlycurrent
pvxMSTPPortHistPMBPDUTCNTXValidity
OBJECT-TYPE
Indicates the validity of the provided number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.39PMValidityread-onlycurrent
pvxMSTPPortHistPMBPDUTCNTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMBPDUTCNTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.40InitializeCmdread-writecurrent
pvxMSTPPortHistPMINVBPDURXValue
OBJECT-TYPE
The number of invalid bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.35.1.41Unsigned64read-onlycurrent
pvxMSTPPortHistPMINVBPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.42DateAndTimeread-onlycurrent
pvxMSTPPortHistPMINVBPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.43PMValidityread-onlycurrent
pvxMSTPPortHistPMINVBPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.44InitializeCmdread-writecurrent
pvxMSTPPortHistPMINVBPDUCFGRXValue
OBJECT-TYPE
The number of invalid configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.45Unsigned64read-onlycurrent
pvxMSTPPortHistPMINVBPDUCFGRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.46DateAndTimeread-onlycurrent
pvxMSTPPortHistPMINVBPDUCFGRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.47PMValidityread-onlycurrent
pvxMSTPPortHistPMINVBPDUCFGRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMINVBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.48InitializeCmdread-writecurrent
pvxMSTPPortHistPMINVBPDUTCNRXValue
OBJECT-TYPE
The number of invalid topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.49Unsigned64read-onlycurrent
pvxMSTPPortHistPMINVBPDUTCNRXTimeStamp
OBJECT-TYPE
The date and time stamp of the number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.50DateAndTimeread-onlycurrent
pvxMSTPPortHistPMINVBPDUTCNRXValidity
OBJECT-TYPE
Indicates the validity of the provided number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.51PMValidityread-onlycurrent
pvxMSTPPortHistPMINVBPDUTCNRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxMSTPPortHistPMINVBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.52InitializeCmdread-writecurrent
pvxLAGPortCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for the PacketVX LAG port interfaces on the NE.
1.3.6.1.4.1.18070.2.2.1.6.36not-accessiblecurrent
pvxLAGPortCrntPMEntry
OBJECT-TYPE
The row entry object of the PacketVX LAG port current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given PVX LAG Port.
1.3.6.1.4.1.18070.2.2.1.6.36.1not-accessiblecurrent
pvxLAGPortCrntPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the PVX LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.36.1.1INTEGER (1..11)not-accessiblecurrent
pvxLAGPortCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxLAGPortCrntPMSlotIdx
OBJECT-TYPE
The number of the slot within which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxLAGPortCrntPMTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.36.1.4PvxPortTypenot-accessiblecurrent
pvxLAGPortCrntPMIdx
OBJECT-TYPE
The number of the port of the identified type on which the PVX LAG port targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.36.1.5INTEGER (1..24)not-accessiblecurrent
pvxLAGPortCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.36.1.6PMIntervalTypenot-accessiblecurrent
pvxLAGPortCrntPMLACPDURXValue
OBJECT-TYPE
The total Link Access Control PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.7Unsigned64read-onlycurrent
pvxLAGPortCrntPMLACPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.8DateAndTimeread-onlycurrent
pvxLAGPortCrntPMLACPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.9PMValidityread-onlycurrent
pvxLAGPortCrntPMLACPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortCrntPMLACPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.10InitializeCmdread-writecurrent
pvxLAGPortCrntPMMRKPDURXValue
OBJECT-TYPE
The count of Marker PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.11Unsigned64read-onlycurrent
pvxLAGPortCrntPMMRKPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.12DateAndTimeread-onlycurrent
pvxLAGPortCrntPMMRKPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.13PMValidityread-onlycurrent
pvxLAGPortCrntPMMRKPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortCrntPMMRKPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.14InitializeCmdread-writecurrent
pvxLAGPortCrntPMMRKRSPPDURXValue
OBJECT-TYPE
The count of Marker Response PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.15Unsigned64read-onlycurrent
pvxLAGPortCrntPMMRKRSPPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.16DateAndTimeread-onlycurrent
pvxLAGPortCrntPMMRKRSPPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.17PMValidityread-onlycurrent
pvxLAGPortCrntPMMRKRSPPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortCrntPMMRKPDURSPRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.18InitializeCmdread-writecurrent
pvxLAGPortCrntPMINVLACFRRXValue
OBJECT-TYPE
The count of invalid Link Access Control frames received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.19Unsigned64read-onlycurrent
pvxLAGPortCrntPMINVLACFRRXTimeStamp
OBJECT-TYPE
The date and time stamp of the count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.20DateAndTimeread-onlycurrent
pvxLAGPortCrntPMINVLACFRRXValidity
OBJECT-TYPE
Indicates the validity of the provided count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.21PMValidityread-onlycurrent
pvxLAGPortCrntPMINVLACFRRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortCrntPMINVLACFRRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.22InitializeCmdread-writecurrent
pvxLAGPortCrntPMLACPDUTXValue
OBJECT-TYPE
The total Link Access Control PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.23Unsigned64read-onlycurrent
pvxLAGPortCrntPMLACPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.24DateAndTimeread-onlycurrent
pvxLAGPortCrntPMLACPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.25PMValidityread-onlycurrent
pvxLAGPortCrntPMLACPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortCrntPMLACPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.26InitializeCmdread-writecurrent
pvxLAGPortCrntPMMRKPDUTXValue
OBJECT-TYPE
The count of Marker PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.27Unsigned64read-onlycurrent
pvxLAGPortCrntPMMRKPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.28DateAndTimeread-onlycurrent
pvxLAGPortCrntPMMRKPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.29PMValidityread-onlycurrent
pvxLAGPortCrntPMMRKPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortCrntPMMRKPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.30InitializeCmdread-writecurrent
pvxLAGPortCrntPMMRKRSPPDUTXValue
OBJECT-TYPE
The count of Marker Response PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.31Unsigned64read-onlycurrent
pvxLAGPortCrntPMMRKRSPPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.32DateAndTimeread-onlycurrent
pvxLAGPortCrntPMMRKRSPPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.33PMValidityread-onlycurrent
pvxLAGPortCrntPMMRKRSPPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortCrntPMMRKPDURSPTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.34InitializeCmdread-writecurrent
pvxLAGPortHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for the PacketVX LAG port interfaces on the NE.
1.3.6.1.4.1.18070.2.2.1.6.37not-accessiblecurrent
pvxLAGPortHistPMEntry
OBJECT-TYPE
The row entry object of the PacketVX LAG port historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given PVX LAG Port.
1.3.6.1.4.1.18070.2.2.1.6.37.1not-accessiblecurrent
pvxLAGPortHistPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the PVX LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.37.1.1INTEGER (1..11)not-accessiblecurrent
pvxLAGPortHistPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxLAGPortHistPMSlotIdx
OBJECT-TYPE
The number of the slot within which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxLAGPortHistPMTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.37.1.4PvxPortTypenot-accessiblecurrent
pvxLAGPortHistPMIdx
OBJECT-TYPE
The number of the port of the identified type on which the PVX LAG port targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.37.1.5INTEGER (1..24)not-accessiblecurrent
pvxLAGPortHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.37.1.6PMIntervalTypenot-accessiblecurrent
pvxLAGPortHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.37.1.7INTEGER (1..96)not-accessiblecurrent
pvxLAGPortHistPMLACPDURXValue
OBJECT-TYPE
The total Link Access Control PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.8Unsigned64read-onlycurrent
pvxLAGPortHistPMLACPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.9DateAndTimeread-onlycurrent
pvxLAGPortHistPMLACPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.10PMValidityread-onlycurrent
pvxLAGPortHistPMLACPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortHistPMLACPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.11InitializeCmdread-writecurrent
pvxLAGPortHistPMMRKPDURXValue
OBJECT-TYPE
The count of Marker PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.12Unsigned64read-onlycurrent
pvxLAGPortHistPMMRKPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.13DateAndTimeread-onlycurrent
pvxLAGPortHistPMMRKPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.14PMValidityread-onlycurrent
pvxLAGPortHistPMMRKPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortHistPMMRKPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.15InitializeCmdread-writecurrent
pvxLAGPortHistPMMRKRSPPDURXValue
OBJECT-TYPE
The count of Marker Response PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.16Unsigned64read-onlycurrent
pvxLAGPortHistPMMRKRSPPDURXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.17DateAndTimeread-onlycurrent
pvxLAGPortHistPMMRKRSPPDURXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.18PMValidityread-onlycurrent
pvxLAGPortHistPMMRKRSPPDURXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortHistPMMRKPDURSPRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.19InitializeCmdread-writecurrent
pvxLAGPortHistPMINVLACFRRXValue
OBJECT-TYPE
The count of invalid Link Access Control frames received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.20Unsigned64read-onlycurrent
pvxLAGPortHistPMINVLACFRRXTimeStamp
OBJECT-TYPE
The date and time stamp of the count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.21DateAndTimeread-onlycurrent
pvxLAGPortHistPMINVLACFRRXValidity
OBJECT-TYPE
Indicates the validity of the provided count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.22PMValidityread-onlycurrent
pvxLAGPortHistPMINVLACFRRXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortHistPMINVLACFRRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.23InitializeCmdread-writecurrent
pvxLAGPortHistPMLACPDUTXValue
OBJECT-TYPE
The total Link Access Control PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.24Unsigned64read-onlycurrent
pvxLAGPortHistPMLACPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.25DateAndTimeread-onlycurrent
pvxLAGPortHistPMLACPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.26PMValidityread-onlycurrent
pvxLAGPortHistPMLACPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortHistPMLACPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.27InitializeCmdread-writecurrent
pvxLAGPortHistPMMRKPDUTXValue
OBJECT-TYPE
The count of Marker PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.28Unsigned64read-onlycurrent
pvxLAGPortHistPMMRKPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.29DateAndTimeread-onlycurrent
pvxLAGPortHistPMMRKPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.30PMValidityread-onlycurrent
pvxLAGPortHistPMMRKPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortHistPMMRKPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.31InitializeCmdread-writecurrent
pvxLAGPortHistPMMRKRSPPDUTXValue
OBJECT-TYPE
The count of Marker Response PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.32Unsigned64read-onlycurrent
pvxLAGPortHistPMMRKRSPPDUTXTimeStamp
OBJECT-TYPE
The date and time stamp of the Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.33DateAndTimeread-onlycurrent
pvxLAGPortHistPMMRKRSPPDUTXValidity
OBJECT-TYPE
Indicates the validity of the provided Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.34PMValidityread-onlycurrent
pvxLAGPortHistPMMRKRSPPDUTXInitialize
OBJECT-TYPE
Used to initialize the value of the pvxLAGPortHistPMMRKPDURSPTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.35InitializeCmdread-writecurrent
pvxESrvcCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for the PacketVX ethernet services objects.
1.3.6.1.4.1.18070.2.2.1.6.40not-accessiblecurrent
pvxESrvcCrntPMEntry
OBJECT-TYPE
The row entry object of the PacketVX ethernet services current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given ethernet service instance.
1.3.6.1.4.1.18070.2.2.1.6.40.1not-accessiblecurrent
pvxESrvcCrntPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the ethernet service is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.40.1.1INTEGER (1..11)not-accessiblecurrent
pvxESrvcCrntPMESrvcNameIdx
OBJECT-TYPE
The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.40.1.2DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.40.1.3PMIntervalTypenot-accessiblecurrent
pvxESrvcCrntPMUASValue
OBJECT-TYPE
The count of unavailable seconds for the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.40.1.4Unsigned32read-writecurrent
pvxESrvcCrntPMUASTimeStamp
OBJECT-TYPE
The date and time stamp of the ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.40.1.5DateAndTimeread-onlycurrent
pvxESrvcCrntPMUASValidity
OBJECT-TYPE
Indicates the validity of the provided ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.40.1.6PMValidityread-onlycurrent
pvxESrvcCrntPMUASInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcCrntPMUASValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.40.1.7InitializeCmdread-writecurrent
pvxESrvcHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for the PacketVX ethernet services objects.
1.3.6.1.4.1.18070.2.2.1.6.41not-accessiblecurrent
pvxESrvcHistPMEntry
OBJECT-TYPE
The row entry object of the PacketVX ethernet services historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given ethernet service instance.
1.3.6.1.4.1.18070.2.2.1.6.41.1not-accessiblecurrent
pvxESrvcHistPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the ethernet service is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.41.1.1INTEGER (1..11)not-accessiblecurrent
pvxESrvcHistPMESrvcNameIdx
OBJECT-TYPE
The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.41.1.2DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.41.1.3PMIntervalTypenot-accessiblecurrent
pvxESrvcHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.41.1.4INTEGER (1..96)not-accessiblecurrent
pvxESrvcHistPMUASValue
OBJECT-TYPE
The count of unavailable seconds for the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.41.1.5Unsigned32read-writecurrent
pvxESrvcHistPMUASTimeStamp
OBJECT-TYPE
The date and time stamp of the ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.41.1.6DateAndTimeread-onlycurrent
pvxESrvcHistPMUASValidity
OBJECT-TYPE
Indicates the validity of the provided ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.41.1.7PMValidityread-onlycurrent
pvxESrvcHistPMUASInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcHistPMUASValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.41.1.8InitializeCmdread-writecurrent
pvxESrvcBWPrflCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for the PacketVX perEVC and perCoS objects.
1.3.6.1.4.1.18070.2.2.1.6.42not-accessiblecurrent
pvxESrvcBWPrflCrntPMEntry
OBJECT-TYPE
The row entry object of the PacketVX ethernet services bandwidth profile current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given perEVC or perCoS instance.
1.3.6.1.4.1.18070.2.2.1.6.42.1not-accessiblecurrent
pvxESrvcBWPrflCrntPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.1INTEGER (1..11)not-accessiblecurrent
pvxESrvcBWPrflCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxESrvcBWPrflCrntPMSlotIdx
OBJECT-TYPE
The number of the slot on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxESrvcBWPrflCrntPMPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.4PvxPortTypenot-accessiblecurrent
pvxESrvcBWPrflCrntPMPortIdx
OBJECT-TYPE
The number of the port of the identified type on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.5INTEGER (1..24)not-accessiblecurrent
pvxESrvcBWPrflCrntPMESrvcNameIdx
OBJECT-TYPE
The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.6DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflCrntPMPlcyNameIdx
OBJECT-TYPE
The name of the policy.
1.3.6.1.4.1.18070.2.2.1.6.42.1.7DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflCrntPMClsMapNameIdx
OBJECT-TYPE
The name of the class map.
1.3.6.1.4.1.18070.2.2.1.6.42.1.8DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflCrntPMDirectionIdx
OBJECT-TYPE
The direction of traffic of the monitored object.
1.3.6.1.4.1.18070.2.2.1.6.42.1.9INTEGER {ingress(1), egress(2)}not-accessiblecurrent
pvxESrvcBWPrflCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.42.1.10PMIntervalTypenot-accessiblecurrent
pvxESrvcBWPrflCrntPMOctetsTotalValue
OBJECT-TYPE
The total count of octets received or transmitted for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.11Unsigned64read-onlycurrent
pvxESrvcBWPrflCrntPMOctetsTotalTimeStamp
OBJECT-TYPE
The date and time stamp of the total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.12DateAndTimeread-onlycurrent
pvxESrvcBWPrflCrntPMOctetsTotalValidity
OBJECT-TYPE
Indicates the validity of the provided total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.13PMValidityread-onlycurrent
pvxESrvcBWPrflCrntPMOctetsTotalInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflCrntPMOctetsTotalValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42.1.14InitializeCmdread-writecurrent
pvxESrvcBWPrflCrntPMOctetsVltValue
OBJECT-TYPE
The count of octets violate for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.15Unsigned64read-onlycurrent
pvxESrvcBWPrflCrntPMOctetsVltTimeStamp
OBJECT-TYPE
The date and time stamp of the octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.16DateAndTimeread-onlycurrent
pvxESrvcBWPrflCrntPMOctetsVltValidity
OBJECT-TYPE
Indicates the validity of the provided octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.17PMValidityread-onlycurrent
pvxESrvcBWPrflCrntPMOctetsVltInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflCrntPMOctetsVltValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42.1.18InitializeCmdread-writecurrent
pvxESrvcBWPrflCrntPMOctetsCnfExcValue
OBJECT-TYPE
The count of octets conform and exceeded for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.19Unsigned64read-onlycurrent
pvxESrvcBWPrflCrntPMOctetsCnfExcTimeStamp
OBJECT-TYPE
The date and time stamp of the octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.20DateAndTimeread-onlycurrent
pvxESrvcBWPrflCrntPMOctetsCnfExcValidity
OBJECT-TYPE
Indicates the validity of the provided octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.21PMValidityread-onlycurrent
pvxESrvcBWPrflCrntPMOctetsCnfExcInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflCrntPMOctetsCnfExcValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42.1.22InitializeCmdread-writecurrent
pvxESrvcBWPrflCrntPMBDWUtlzValue
OBJECT-TYPE
The bandwidth utilization of the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.23FixedX100read-writecurrent
pvxESrvcBWPrflCrntPMBDWUtlzTimeStamp
OBJECT-TYPE
The date and time stamp of the bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.24DateAndTimeread-onlycurrent
pvxESrvcBWPrflCrntPMBDWUtlzValidity
OBJECT-TYPE
Indicates the validity of the provided bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.25PMValidityread-onlycurrent
pvxESrvcBWPrflCrntPMBDWUtlzInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflCrntPMBDWUtlzValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42.1.26InitializeCmdread-writecurrent
pvxESrvcBWPrflHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for the PacketVX perEVC and perCoS objects.
1.3.6.1.4.1.18070.2.2.1.6.43not-accessiblecurrent
pvxESrvcBWPrflHistPMEntry
OBJECT-TYPE
The row entry object of the PacketVX ethernet services bandwidth profile historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given perEVC or perCoS instance.
1.3.6.1.4.1.18070.2.2.1.6.43.1not-accessiblecurrent
pvxESrvcBWPrflHistPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.1INTEGER (1..11)not-accessiblecurrent
pvxESrvcBWPrflHistPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxESrvcBWPrflHistPMSlotIdx
OBJECT-TYPE
The number of the slot on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxESrvcBWPrflHistPMPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.4PvxPortTypenot-accessiblecurrent
pvxESrvcBWPrflHistPMPortIdx
OBJECT-TYPE
The number of the port of the identified type on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.5INTEGER (1..24)not-accessiblecurrent
pvxESrvcBWPrflHistPMESrvcNameIdx
OBJECT-TYPE
The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.6DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflHistPMPlcyNameIdx
OBJECT-TYPE
The name of the policy.
1.3.6.1.4.1.18070.2.2.1.6.43.1.7DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflHistPMClsMapNameIdx
OBJECT-TYPE
The name of the class map.
1.3.6.1.4.1.18070.2.2.1.6.43.1.8DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflHistPMDirectionIdx
OBJECT-TYPE
The direction of traffic of the monitored object.
1.3.6.1.4.1.18070.2.2.1.6.43.1.9INTEGER {ingress(1), egress(2)}not-accessiblecurrent
pvxESrvcBWPrflHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.43.1.10PMIntervalTypenot-accessiblecurrent
pvxESrvcBWPrflHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.43.1.11INTEGER (1..96)not-accessiblecurrent
pvxESrvcBWPrflHistPMOctetsTotalValue
OBJECT-TYPE
The total count of octets received or transmitted for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.12Unsigned64read-onlycurrent
pvxESrvcBWPrflHistPMOctetsTotalTimeStamp
OBJECT-TYPE
The date and time stamp of the total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.13DateAndTimeread-onlycurrent
pvxESrvcBWPrflHistPMOctetsTotalValidity
OBJECT-TYPE
Indicates the validity of the provided total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.14PMValidityread-onlycurrent
pvxESrvcBWPrflHistPMOctetsTotalInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflHistPMOctetsTotalValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43.1.15InitializeCmdread-writecurrent
pvxESrvcBWPrflHistPMOctetsVltValue
OBJECT-TYPE
The count of octets violate for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.16Unsigned64read-onlycurrent
pvxESrvcBWPrflHistPMOctetsVltTimeStamp
OBJECT-TYPE
The date and time stamp of the octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.17DateAndTimeread-onlycurrent
pvxESrvcBWPrflHistPMOctetsVltValidity
OBJECT-TYPE
Indicates the validity of the provided octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.18PMValidityread-onlycurrent
pvxESrvcBWPrflHistPMOctetsVltInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflHistPMOctetsVltValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43.1.19InitializeCmdread-writecurrent
pvxESrvcBWPrflHistPMOctetsCnfExcValue
OBJECT-TYPE
The count of octets conform and exceeded for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.20Unsigned64read-onlycurrent
pvxESrvcBWPrflHistPMOctetsCnfExcTimeStamp
OBJECT-TYPE
The date and time stamp of the octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.21DateAndTimeread-onlycurrent
pvxESrvcBWPrflHistPMOctetsCnfExcValidity
OBJECT-TYPE
Indicates the validity of the provided octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.22PMValidityread-onlycurrent
pvxESrvcBWPrflHistPMOctetsCnfExcInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflHistPMOctetsCnfExcValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43.1.23InitializeCmdread-writecurrent
pvxESrvcBWPrflHistPMBDWUtlzValue
OBJECT-TYPE
The bandwidth utilization of the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.24FixedX100read-writecurrent
pvxESrvcBWPrflHistPMBDWUtlzTimeStamp
OBJECT-TYPE
The date and time stamp of the bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.25DateAndTimeread-onlycurrent
pvxESrvcBWPrflHistPMBDWUtlzValidity
OBJECT-TYPE
Indicates the validity of the provided bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.26PMValidityread-onlycurrent
pvxESrvcBWPrflHistPMBDWUtlzInitialize
OBJECT-TYPE
Used to initialize the value of the pvxESrvcBWPrflHistPMBDWUtlzValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43.1.27InitializeCmdread-writecurrent
pvxESrvcBWPrflPMThresholdTable
OBJECT-TYPE
A table of threshold levels for monitored parameters which support threshold crossing alerts on PacketVX perEVC and perCoS objects.
1.3.6.1.4.1.18070.2.2.1.6.44not-accessiblecurrent
pvxESrvcBWPrflPMThresholdEntry
OBJECT-TYPE
The row entry object of the PVX Ethernet Service Bandwidth Profile performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval level that applies to an individual perEVC or perCoS instance.
1.3.6.1.4.1.18070.2.2.1.6.44.1not-accessiblecurrent
pvxESrvcBWPrflPMThresholdSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.1INTEGER (1..11)not-accessiblecurrent
pvxESrvcBWPrflPMThresholdShelfIdx
OBJECT-TYPE
The number of the shelf on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxESrvcBWPrflPMThresholdSlotIdx
OBJECT-TYPE
The number of the slot on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxESrvcBWPrflPMThresholdPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.4PvxPortTypenot-accessiblecurrent
pvxESrvcBWPrflPMThresholdPortIdx
OBJECT-TYPE
The number of the port of the identified type on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.5INTEGER (1..24)not-accessiblecurrent
pvxESrvcBWPrflPMThresholdESrvcNameIdx
OBJECT-TYPE
The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.44.1.6DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflPMThresholdPlcyNameIdx
OBJECT-TYPE
The name of the policy.
1.3.6.1.4.1.18070.2.2.1.6.44.1.7DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflPMThresholdClsMapNameIdx
OBJECT-TYPE
The name of the class map.
1.3.6.1.4.1.18070.2.2.1.6.44.1.8DisplayString (SIZE(1..32))not-accessiblecurrent
pvxESrvcBWPrflPMThresholdDirectionIdx
OBJECT-TYPE
The direction of traffic of the monitored object.
1.3.6.1.4.1.18070.2.2.1.6.44.1.9INTEGER {ingress(1), egress(2)}not-accessiblecurrent
pvxESrvcBWPrflPMThresholdLevelTypeIdx
OBJECT-TYPE
Identifies the specific PM threshold according to interval length and level criticality.
1.3.6.1.4.1.18070.2.2.1.6.44.1.10PvxESrvcBWPrflPMThresholdLevelTypenot-accessiblecurrent
pvxESrvcBWPrflPMThresholdBDWUtlzValue
OBJECT-TYPE
The threshold for the bandwidth utilization.
1.3.6.1.4.1.18070.2.2.1.6.44.1.11FixedX100read-writecurrent
pvxERPSPortCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for PacketVX ERPS Port
1.3.6.1.4.1.18070.2.2.1.6.45not-accessiblecurrent
pvxERPSPortCrntPMEntry
OBJECT-TYPE
The row entry object of the PacketVX ERPS Port current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given PVX ERPS Port.
1.3.6.1.4.1.18070.2.2.1.6.45.1not-accessiblecurrent
pvxERPSPortCrntPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the ERPS Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.45.1.1INTEGER (1..11)not-accessiblecurrent
pvxERPSPortCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the ERPS Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxERPSPortCrntPMSlotIdx
OBJECT-TYPE
The number of the slot within which the ERPS Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxERPSPortCrntPMTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the ERPS Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.45.1.4PvxPortTypenot-accessiblecurrent
pvxERPSPortCrntPMPortIdx
OBJECT-TYPE
The port number for the ERPS Port
1.3.6.1.4.1.18070.2.2.1.6.45.1.5INTEGER (0..64)not-accessiblecurrent
pvxERPSPortCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.45.1.6PMIntervalTypenot-accessiblecurrent
pvxERPSPortCrntPMPduTxValue
OBJECT-TYPE
The Number of PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.7Unsigned64read-onlycurrent
pvxERPSPortCrntPMPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.8DateAndTimeread-onlycurrent
pvxERPSPortCrntPMPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.9PMValidityread-onlycurrent
pvxERPSPortCrntPMPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.10InitializeCmdread-writecurrent
pvxERPSPortCrntPMPduRxValue
OBJECT-TYPE
The number of PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.11Unsigned64read-onlycurrent
pvxERPSPortCrntPMPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.12DateAndTimeread-onlycurrent
pvxERPSPortCrntPMPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.13PMValidityread-onlycurrent
pvxERPSPortCrntPMPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.14InitializeCmdread-writecurrent
pvxERPSPortCrntPMPduDiscardValue
OBJECT-TYPE
The number of PDUs discarded on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.15Unsigned64read-onlycurrent
pvxERPSPortCrntPMPduDiscardTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.16DateAndTimeread-onlycurrent
pvxERPSPortCrntPMPduDiscardValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.17PMValidityread-onlycurrent
pvxERPSPortCrntPMPduDiscardInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.18InitializeCmdread-writecurrent
pvxERPSPortCrntPMBlockedValue
OBJECT-TYPE
The number of times this port has transitioned to blocked state
1.3.6.1.4.1.18070.2.2.1.6.45.1.19Unsigned64read-onlycurrent
pvxERPSPortCrntPMBlockedTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.20DateAndTimeread-onlycurrent
pvxERPSPortCrntPMBlockedValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.21PMValidityread-onlycurrent
pvxERPSPortCrntPMBlockedInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.22InitializeCmdread-writecurrent
pvxERPSPortCrntPMUnblockedValue
OBJECT-TYPE
The number of times this port has transitioned to unblocked state
1.3.6.1.4.1.18070.2.2.1.6.45.1.23Unsigned64read-onlycurrent
pvxERPSPortCrntPMUnblockedTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.24DateAndTimeread-onlycurrent
pvxERPSPortCrntPMUnblockedValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.25PMValidityread-onlycurrent
pvxERPSPortCrntPMUnblockedInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.26InitializeCmdread-writecurrent
pvxERPSPortCrntPMFailuresValue
OBJECT-TYPE
The number of times this port has transitioned to failed state
1.3.6.1.4.1.18070.2.2.1.6.45.1.27Unsigned64read-onlycurrent
pvxERPSPortCrntPMFailuresTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.28DateAndTimeread-onlycurrent
pvxERPSPortCrntPMFailuresValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.29PMValidityread-onlycurrent
pvxERPSPortCrntPMFailuresInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.30InitializeCmdread-writecurrent
pvxERPSPortCrntPMRecoveriesValue
OBJECT-TYPE
The number of times this port has recovered from failed state
1.3.6.1.4.1.18070.2.2.1.6.45.1.31Unsigned64read-onlycurrent
pvxERPSPortCrntPMRecoveriesTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.32DateAndTimeread-onlycurrent
pvxERPSPortCrntPMRecoveriesValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.33PMValidityread-onlycurrent
pvxERPSPortCrntPMRecoveriesInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.34InitializeCmdread-writecurrent
pvxERPSPortCrntPMNrPduTxValue
OBJECT-TYPE
The Number of NR PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.35Unsigned64read-onlycurrent
pvxERPSPortCrntPMNrPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.36DateAndTimeread-onlycurrent
pvxERPSPortCrntPMNrPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.37PMValidityread-onlycurrent
pvxERPSPortCrntPMNrPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.38InitializeCmdread-writecurrent
pvxERPSPortCrntPMNrPduRxValue
OBJECT-TYPE
The number of NR PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.39Unsigned64read-onlycurrent
pvxERPSPortCrntPMNrPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.40DateAndTimeread-onlycurrent
pvxERPSPortCrntPMNrPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.41PMValidityread-onlycurrent
pvxERPSPortCrntPMNrPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.42InitializeCmdread-writecurrent
pvxERPSPortCrntPMNrrbPduTxValue
OBJECT-TYPE
The Number of NRRB PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.43Unsigned64read-onlycurrent
pvxERPSPortCrntPMNrrbPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.44DateAndTimeread-onlycurrent
pvxERPSPortCrntPMNrrbPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.45PMValidityread-onlycurrent
pvxERPSPortCrntPMNrrbPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.46InitializeCmdread-writecurrent
pvxERPSPortCrntPMNrrbPduRxValue
OBJECT-TYPE
The number of NRRB PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.47Unsigned64read-onlycurrent
pvxERPSPortCrntPMNrrbPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.48DateAndTimeread-onlycurrent
pvxERPSPortCrntPMNrrbPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.49PMValidityread-onlycurrent
pvxERPSPortCrntPMNrrbPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.50InitializeCmdread-writecurrent
pvxERPSPortCrntPMSfPduTxValue
OBJECT-TYPE
The Number of SF PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.51Unsigned64read-onlycurrent
pvxERPSPortCrntPMSfPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.52DateAndTimeread-onlycurrent
pvxERPSPortCrntPMSfPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.53PMValidityread-onlycurrent
pvxERPSPortCrntPMSfPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.54InitializeCmdread-writecurrent
pvxERPSPortCrntPMSfPduRxValue
OBJECT-TYPE
The number of SF PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.55Unsigned64read-onlycurrent
pvxERPSPortCrntPMSfPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.56DateAndTimeread-onlycurrent
pvxERPSPortCrntPMSfPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.57PMValidityread-onlycurrent
pvxERPSPortCrntPMSfPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.58InitializeCmdread-writecurrent
pvxERPSPortCrntPMFsPduTxValue
OBJECT-TYPE
The Number of FS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.59Unsigned64read-onlycurrent
pvxERPSPortCrntPMFsPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.60DateAndTimeread-onlycurrent
pvxERPSPortCrntPMFsPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.61PMValidityread-onlycurrent
pvxERPSPortCrntPMFsPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.62InitializeCmdread-writecurrent
pvxERPSPortCrntPMFsPduRxValue
OBJECT-TYPE
The number of FS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.63Unsigned64read-onlycurrent
pvxERPSPortCrntPMFsPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.64DateAndTimeread-onlycurrent
pvxERPSPortCrntPMFsPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.65PMValidityread-onlycurrent
pvxERPSPortCrntPMFsPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.66InitializeCmdread-writecurrent
pvxERPSPortCrntPMMsPduTxValue
OBJECT-TYPE
The Number of MS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.67Unsigned64read-onlycurrent
pvxERPSPortCrntPMMsPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.68DateAndTimeread-onlycurrent
pvxERPSPortCrntPMMsPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.69PMValidityread-onlycurrent
pvxERPSPortCrntPMMsPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.70InitializeCmdread-writecurrent
pvxERPSPortCrntPMMsPduRxValue
OBJECT-TYPE
The number of MS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.71Unsigned64read-onlycurrent
pvxERPSPortCrntPMMsPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.72DateAndTimeread-onlycurrent
pvxERPSPortCrntPMMsPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.73PMValidityread-onlycurrent
pvxERPSPortCrntPMMsPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.74InitializeCmdread-writecurrent
pvxERPSPortCrntPMEventPduTxValue
OBJECT-TYPE
The Number of Event PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.75Unsigned64read-onlycurrent
pvxERPSPortCrntPMEventPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.76DateAndTimeread-onlycurrent
pvxERPSPortCrntPMEventPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.77PMValidityread-onlycurrent
pvxERPSPortCrntPMEventPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.78InitializeCmdread-writecurrent
pvxERPSPortCrntPMEventPduRxValue
OBJECT-TYPE
The number of Event PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.79Unsigned64read-onlycurrent
pvxERPSPortCrntPMEventPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.80DateAndTimeread-onlycurrent
pvxERPSPortCrntPMEventPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.81PMValidityread-onlycurrent
pvxERPSPortCrntPMEventPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.82InitializeCmdread-writecurrent
pvxERPSPortCrntPMVersionDiscardValue
OBJECT-TYPE
The number of PDUs version discards on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.83Unsigned64read-onlycurrent
pvxERPSPortCrntPMVersionDiscardTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.84DateAndTimeread-onlycurrent
pvxERPSPortCrntPMVersionDiscardValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.85PMValidityread-onlycurrent
pvxERPSPortCrntPMVersionDiscardInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.86InitializeCmdread-writecurrent
pvxERPSPortHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for PacketVX ERPS Port and ERPS Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.46not-accessiblecurrent
pvxERPSPortHistPMEntry
OBJECT-TYPE
The row entry object of the PacketVX ERPS Port historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given PVX ERPS Port or ERPS Instance Port.
1.3.6.1.4.1.18070.2.2.1.6.46.1not-accessiblecurrent
pvxERPSPortHistPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the ERPS Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.46.1.1INTEGER (1..11)not-accessiblecurrent
pvxERPSPortHistPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the ERPS Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxERPSPortHistPMSlotIdx
OBJECT-TYPE
The number of the slot within which the ERPS Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxERPSPortHistPMTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the ERPS Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.46.1.4PvxPortTypenot-accessiblecurrent
pvxERPSPortHistPMPortIdx
OBJECT-TYPE
The port number of the ERPS Port.
1.3.6.1.4.1.18070.2.2.1.6.46.1.5INTEGER (0..64)not-accessiblecurrent
pvxERPSPortHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.46.1.6PMIntervalTypenot-accessiblecurrent
pvxERPSPortHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.46.1.7INTEGER (1..96)not-accessiblecurrent
pvxERPSPortHistPMPduTxValue
OBJECT-TYPE
The Number of PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.8Unsigned64read-onlycurrent
pvxERPSPortHistPMPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.9DateAndTimeread-onlycurrent
pvxERPSPortHistPMPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.10PMValidityread-onlycurrent
pvxERPSPortHistPMPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.11InitializeCmdread-writecurrent
pvxERPSPortHistPMPduRxValue
OBJECT-TYPE
The number of PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.12Unsigned64read-onlycurrent
pvxERPSPortHistPMPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.13DateAndTimeread-onlycurrent
pvxERPSPortHistPMPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.14PMValidityread-onlycurrent
pvxERPSPortHistPMPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.15InitializeCmdread-writecurrent
pvxERPSPortHistPMPduDiscardValue
OBJECT-TYPE
The number of PDUs discarded on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.16Unsigned64read-onlycurrent
pvxERPSPortHistPMPduDiscardTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.17DateAndTimeread-onlycurrent
pvxERPSPortHistPMPduDiscardValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.18PMValidityread-onlycurrent
pvxERPSPortHistPMPduDiscardInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.19InitializeCmdread-writecurrent
pvxERPSPortHistPMBlockedValue
OBJECT-TYPE
The number of times this port has transitioned to blocked state
1.3.6.1.4.1.18070.2.2.1.6.46.1.20Unsigned64read-onlycurrent
pvxERPSPortHistPMBlockedTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.21DateAndTimeread-onlycurrent
pvxERPSPortHistPMBlockedValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.22PMValidityread-onlycurrent
pvxERPSPortHistPMBlockedInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.23InitializeCmdread-writecurrent
pvxERPSPortHistPMUnblockedValue
OBJECT-TYPE
The number of times this port has transitioned to unblocked state
1.3.6.1.4.1.18070.2.2.1.6.46.1.24Unsigned64read-onlycurrent
pvxERPSPortHistPMUnblockedTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.25DateAndTimeread-onlycurrent
pvxERPSPortHistPMUnblockedValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.26PMValidityread-onlycurrent
pvxERPSPortHistPMUnblockedInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.27InitializeCmdread-writecurrent
pvxERPSPortHistPMFailuresValue
OBJECT-TYPE
The number of times this port has transitioned to failed state
1.3.6.1.4.1.18070.2.2.1.6.46.1.28Unsigned64read-onlycurrent
pvxERPSPortHistPMFailuresTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.29DateAndTimeread-onlycurrent
pvxERPSPortHistPMFailuresValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.30PMValidityread-onlycurrent
pvxERPSPortHistPMFailuresInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.31InitializeCmdread-writecurrent
pvxERPSPortHistPMRecoveriesValue
OBJECT-TYPE
The number of times this port has recovered from failed state
1.3.6.1.4.1.18070.2.2.1.6.46.1.32Unsigned64read-onlycurrent
pvxERPSPortHistPMRecoveriesTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.33DateAndTimeread-onlycurrent
pvxERPSPortHistPMRecoveriesValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.34PMValidityread-onlycurrent
pvxERPSPortHistPMRecoveriesInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.35InitializeCmdread-writecurrent
pvxERPSPortHistPMNrPduTxValue
OBJECT-TYPE
The Number of NR PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.36Unsigned64read-onlycurrent
pvxERPSPortHistPMNrPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.37DateAndTimeread-onlycurrent
pvxERPSPortHistPMNrPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.38PMValidityread-onlycurrent
pvxERPSPortHistPMNrPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.39InitializeCmdread-writecurrent
pvxERPSPortHistPMNrPduRxValue
OBJECT-TYPE
The number of NR PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.40Unsigned64read-onlycurrent
pvxERPSPortHistPMNrPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.41DateAndTimeread-onlycurrent
pvxERPSPortHistPMNrPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.42PMValidityread-onlycurrent
pvxERPSPortHistPMNrPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.43InitializeCmdread-writecurrent
pvxERPSPortHistPMNrrbPduTxValue
OBJECT-TYPE
The Number of NRRB PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.44Unsigned64read-onlycurrent
pvxERPSPortHistPMNrrbPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.45DateAndTimeread-onlycurrent
pvxERPSPortHistPMNrrbPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.46PMValidityread-onlycurrent
pvxERPSPortHistPMNrrbPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.47InitializeCmdread-writecurrent
pvxERPSPortHistPMNrrbPduRxValue
OBJECT-TYPE
The number of NRRB PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.48Unsigned64read-onlycurrent
pvxERPSPortHistPMNrrbPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.49DateAndTimeread-onlycurrent
pvxERPSPortHistPMNrrbPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.50PMValidityread-onlycurrent
pvxERPSPortHistPMNrrbPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.51InitializeCmdread-writecurrent
pvxERPSPortHistPMSfPduTxValue
OBJECT-TYPE
The Number of SF PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.52Unsigned64read-onlycurrent
pvxERPSPortHistPMSfPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.53DateAndTimeread-onlycurrent
pvxERPSPortHistPMSfPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.54PMValidityread-onlycurrent
pvxERPSPortHistPMSfPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.55InitializeCmdread-writecurrent
pvxERPSPortHistPMSfPduRxValue
OBJECT-TYPE
The number of SF PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.56Unsigned64read-onlycurrent
pvxERPSPortHistPMSfPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.57DateAndTimeread-onlycurrent
pvxERPSPortHistPMSfPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.58PMValidityread-onlycurrent
pvxERPSPortHistPMSfPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.59InitializeCmdread-writecurrent
pvxERPSPortHistPMFsPduTxValue
OBJECT-TYPE
The Number of FS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.60Unsigned64read-onlycurrent
pvxERPSPortHistPMFsPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.61DateAndTimeread-onlycurrent
pvxERPSPortHistPMFsPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.62PMValidityread-onlycurrent
pvxERPSPortHistPMFsPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.63InitializeCmdread-writecurrent
pvxERPSPortHistPMFsPduRxValue
OBJECT-TYPE
The number of FS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.64Unsigned64read-onlycurrent
pvxERPSPortHistPMFsPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.65DateAndTimeread-onlycurrent
pvxERPSPortHistPMFsPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.66PMValidityread-onlycurrent
pvxERPSPortHistPMFsPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.67InitializeCmdread-writecurrent
pvxERPSPortHistPMMsPduTxValue
OBJECT-TYPE
The Number of MS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.68Unsigned64read-onlycurrent
pvxERPSPortHistPMMsPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.69DateAndTimeread-onlycurrent
pvxERPSPortHistPMMsPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.70PMValidityread-onlycurrent
pvxERPSPortHistPMMsPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.71InitializeCmdread-writecurrent
pvxERPSPortHistPMMsPduRxValue
OBJECT-TYPE
The number of MS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.72Unsigned64read-onlycurrent
pvxERPSPortHistPMMsPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.73DateAndTimeread-onlycurrent
pvxERPSPortHistPMMsPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.74PMValidityread-onlycurrent
pvxERPSPortHistPMMsPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.75InitializeCmdread-writecurrent
pvxERPSPortHistPMEventPduTxValue
OBJECT-TYPE
The Number of Event PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.76Unsigned64read-onlycurrent
pvxERPSPortHistPMEventPduTxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.77DateAndTimeread-onlycurrent
pvxERPSPortHistPMEventPduTxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.78PMValidityread-onlycurrent
pvxERPSPortHistPMEventPduTxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.79InitializeCmdread-writecurrent
pvxERPSPortHistPMEventPduRxValue
OBJECT-TYPE
The number of Event PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.80Unsigned64read-onlycurrent
pvxERPSPortHistPMEventPduRxTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.81DateAndTimeread-onlycurrent
pvxERPSPortHistPMEventPduRxValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.82PMValidityread-onlycurrent
pvxERPSPortHistPMEventPduRxInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.83InitializeCmdread-writecurrent
pvxERPSPortHistPMVersionDiscardValue
OBJECT-TYPE
The number of PDUs version discards on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.84Unsigned64read-onlycurrent
pvxERPSPortHistPMVersionDiscardTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.85DateAndTimeread-onlycurrent
pvxERPSPortHistPMVersionDiscardValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.86PMValidityread-onlycurrent
pvxERPSPortHistPMVersionDiscardInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.87InitializeCmdread-writecurrent
pvxEServiceSlaCrntPMTable
OBJECT-TYPE
A table of performance monitoring statistics collected for PacketVX Ethernet Service SLA objects.
1.3.6.1.4.1.18070.2.2.1.6.47not-accessiblecurrent
pvxEServiceSlaCrntPMEntry
OBJECT-TYPE
The row entry object of the PacketVX Ethernet Service SLA historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given PVX Ethernet Service's SLA.
1.3.6.1.4.1.18070.2.2.1.6.47.1not-accessiblecurrent
pvxEServiceSlaCrntPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.47.1.1INTEGER (1..11)not-accessiblecurrent
pvxEServiceSlaCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxEServiceSlaCrntPMSlotIdx
OBJECT-TYPE
The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxEServiceSlaCrntPMPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.47.1.4PvxPortTypenot-accessiblecurrent
pvxEServiceSlaCrntPMPortIdx
OBJECT-TYPE
The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.6.47.1.5INTEGER (0..64)not-accessiblecurrent
pvxEServiceSlaCrntPMESName
OBJECT-TYPE
The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.6.47.1.6DisplayStringnot-accessiblecurrent
pvxEServiceSlaCrntPMRMepId
OBJECT-TYPE
Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.6.47.1.7INTEGER (1..8191)not-accessiblecurrent
pvxEServiceSlaCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.47.1.8PMIntervalTypenot-accessiblecurrent
pvxEServiceSlaCrntPMNearEndFrameLoss
OBJECT-TYPE
Indicates near end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.9FixedX1000read-onlycurrent
pvxEServiceSlaCrntPMNearEndFrameLossTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.10DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPMNearEndFrameLossValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.11PMValidityread-onlycurrent
pvxEServiceSlaCrntPMNearEndFrameLossInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.12InitializeCmdread-writecurrent
pvxEServiceSlaCrntPMFarEndFrameLoss
OBJECT-TYPE
Indicates far end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.13FixedX1000read-onlycurrent
pvxEServiceSlaCrntPMFarEndFrameLossTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.14DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPMFarEndFrameLossValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.15PMValidityread-onlycurrent
pvxEServiceSlaCrntPMFarEndFrameLossInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.16InitializeCmdread-writecurrent
pvxEServiceSlaCrntPM2WayDelayMinimum
OBJECT-TYPE
Indicates two way delay minimum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.17Unsigned32read-onlycurrent
pvxEServiceSlaCrntPM2WayDelayMinimumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.18DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayMinimumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.19PMValidityread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayMinimumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.21InitializeCmdread-writecurrent
pvxEServiceSlaCrntPM2WayDelayMaximum
OBJECT-TYPE
Indicates two way delay maximum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.22Unsigned32read-onlycurrent
pvxEServiceSlaCrntPM2WayDelayMaximumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.23DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayMaximumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.24PMValidityread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayMaximumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.25InitializeCmdread-writecurrent
pvxEServiceSlaCrntPM2WayDelayAverage
OBJECT-TYPE
Indicates two way delay average value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.26Unsigned32read-onlycurrent
pvxEServiceSlaCrntPM2WayDelayAverageTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.27DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayAverageValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.28PMValidityread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayAverageInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.29InitializeCmdread-writecurrent
pvxEServiceSlaCrntPM2WayDelayVariationMinimum
OBJECT-TYPE
Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.30Unsigned32read-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationMinimumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.31DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationMinimumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.32PMValidityread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationMinimumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.33InitializeCmdread-writecurrent
pvxEServiceSlaCrntPM2WayDelayVariationMaximum
OBJECT-TYPE
Indicates two way delay Variation Maximum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.34Unsigned32read-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationMaximumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.35DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationMaximumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.36PMValidityread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationMaximumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.37InitializeCmdread-writecurrent
pvxEServiceSlaCrntPM2WayDelayVariationAverage
OBJECT-TYPE
Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.38Unsigned32read-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationAverageTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.39DateAndTimeread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationAverageValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.40PMValidityread-onlycurrent
pvxEServiceSlaCrntPM2WayDelayVariationAverageInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.41InitializeCmdread-writecurrent
pvxEServiceSlaHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for PacketVX ERPS Port and ERPS Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.48not-accessiblecurrent
pvxEServiceSlaHistPMEntry
OBJECT-TYPE
The row entry object of the PacketVX Ethernet Service SLA historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given PVX Ethernet Service's SLA.
1.3.6.1.4.1.18070.2.2.1.6.48.1not-accessiblecurrent
pvxEServiceSlaHistPMSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.48.1.1INTEGER (1..11)not-accessiblecurrent
pvxEServiceSlaHistPMShelfIdx
OBJECT-TYPE
The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxEServiceSlaHistPMSlotIdx
OBJECT-TYPE
The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxEServiceSlaHistPMPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.48.1.4PvxPortTypenot-accessiblecurrent
pvxEServiceSlaHistPMPortIdx
OBJECT-TYPE
The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.6.48.1.5INTEGER (0..64)not-accessiblecurrent
pvxEServiceSlaHistPMESName
OBJECT-TYPE
The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.6.48.1.6DisplayStringnot-accessiblecurrent
pvxEServiceSlaHistPMRMepId
OBJECT-TYPE
Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.6.48.1.7INTEGER (1..8191)not-accessiblecurrent
pvxEServiceSlaHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.48.1.8PMIntervalTypenot-accessiblecurrent
pvxEServiceSlaHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.48.1.9INTEGER (1..96)not-accessiblecurrent
pvxEServiceSlaHistPMNearEndFrameLoss
OBJECT-TYPE
Indicates near end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.10FixedX1000read-onlycurrent
pvxEServiceSlaHistPMNearEndFrameLossTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.11DateAndTimeread-onlycurrent
pvxEServiceSlaHistPMNearEndFrameLossValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.12PMValidityread-onlycurrent
pvxEServiceSlaHistPMNearEndFrameLossInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.13InitializeCmdread-writecurrent
pvxEServiceSlaHistPMFarEndFrameLoss
OBJECT-TYPE
Indicates far end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.14FixedX1000read-onlycurrent
pvxEServiceSlaHistPMFarEndFrameLossTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.15DateAndTimeread-onlycurrent
pvxEServiceSlaHistPMFarEndFrameLossValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.16PMValidityread-onlycurrent
pvxEServiceSlaHistPMFarEndFrameLossInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.17InitializeCmdread-writecurrent
pvxEServiceSlaHistPM2WayDelayMinimum
OBJECT-TYPE
Indicates two way delay minimum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.18Unsigned32read-onlycurrent
pvxEServiceSlaHistPM2WayDelayMinimumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.19DateAndTimeread-onlycurrent
pvxEServiceSlaHistPM2WayDelayMinimumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.20PMValidityread-onlycurrent
pvxEServiceSlaHistPM2WayDelayMinimumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.21InitializeCmdread-writecurrent
pvxEServiceSlaHistPM2WayDelayMaximum
OBJECT-TYPE
Indicates two way delay maximum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.22Unsigned32read-onlycurrent
pvxEServiceSlaHistPM2WayDelayMaximumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.23DateAndTimeread-onlycurrent
pvxEServiceSlaHistPM2WayDelayMaximumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.24PMValidityread-onlycurrent
pvxEServiceSlaHistPM2WayDelayMaximumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.25InitializeCmdread-writecurrent
pvxEServiceSlaHistPM2WayDelayAverage
OBJECT-TYPE
Indicates two way delay average value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.26Unsigned32read-onlycurrent
pvxEServiceSlaHistPM2WayDelayAverageTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.27DateAndTimeread-onlycurrent
pvxEServiceSlaHistPM2WayDelayAverageValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.28PMValidityread-onlycurrent
pvxEServiceSlaHistPM2WayDelayAverageInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.29InitializeCmdread-writecurrent
pvxEServiceSlaHistPM2WayDelayVariationMinimum
OBJECT-TYPE
Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.30Unsigned32read-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationMinimumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.31DateAndTimeread-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationMinimumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.32PMValidityread-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationMinimumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.33InitializeCmdread-writecurrent
pvxEServiceSlaHistPM2WayDelayVariationMaximum
OBJECT-TYPE
Indicates two way delay Variation Maximum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.34Unsigned32read-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationMaximumTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.35DateAndTimeread-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationMaximumValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.36PMValidityread-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationMaximumInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.37InitializeCmdread-writecurrent
pvxEServiceSlaHistPM2WayDelayVariationAverage
OBJECT-TYPE
Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.38Unsigned32read-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationAverageTimeStamp
OBJECT-TYPE
The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.39DateAndTimeread-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationAverageValidity
OBJECT-TYPE
Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.40PMValidityread-onlycurrent
pvxEServiceSlaHistPM2WayDelayVariationAverageInitialize
OBJECT-TYPE
Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.41InitializeCmdread-writecurrent
pvxSwitchTable
OBJECT-TYPE
This table is used to configure the switching related properties of a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.1not-accessiblecurrent
pvxSwitchEntry
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.1.1not-accessiblecurrent
pvxSwitchIdx
OBJECT-TYPE
An index represents the switch ID. It can be from 1 to 11.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.1INTEGER (1..11)accessible-for-notifycurrent
pvxSwitchMode
OBJECT-TYPE
Sets the top-level operational mode for the packetVX Switch, which is based on the VLAN tagging scheme (802.1Q or 802.1ad) employed by the customer.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.2INTEGER {q-bridge(1), provider-bridge(2)}read-createcurrent
pvxSwitchInnerEthType
OBJECT-TYPE
The inner ethertype (802.1Q) is configurable (switch-level only); enhancement for customers who want/need to support a C-Tag ethertype other than the standard 0x8100 value. Note: this should not be confused with the OuterEtherTypeDot1ad port attribute, which is used to define the ethertype for the S-Tag. This object only applies when the switch is operating in 802.1q mode.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.3Integer32read-onlycurrent
pvxSwitchLearning
OBJECT-TYPE
This attribute used to enable/disable the MAC learning of the bridge. MAC Learning can be enabled to populate the Forwarding Database (FDB) and achieve unicast behavior based on a MAC lookup operation.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.4INTEGER {enabled(1), disabled(2)}read-createcurrent
pvxSwitchAgingTimer
OBJECT-TYPE
When learning and aging are enabled, FDB entries will age out according to the timer value. The aging timer for a particular FDB entry (source MAC address) is �reset�when it is learned or re-learned.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.5INTEGER (0..604800)read-createcurrent
pvxSwitchTimeToAge
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.6INTEGER (0..604800)read-createcurrent
pvxSwitchMasterNode
OBJECT-TYPE
This is a read-only attribute used to inform the user as to the amount of time remaining before the next aging cycle - the time at which FDB entries may be deleted as a result of aging.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.7DisplayStringread-onlydeprecated
pvxSwitchForceSwitch
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.8TruthValueread-createdeprecated
pvxSwitchClearDynamicFDBEntries
OBJECT-TYPE
An action trigger object. Setting the value of this object to 'true' will cause the switch to clear out all of the dynamic MAC address table entries in its forwarding databse table, forcing the switch to relearn all its dynamic entries. When reading this object, the value 'false' will always be returned.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.10TruthValueread-createcurrent
pvxSwitchProtocolAdminState
OBJECT-TYPE
Bit map indicating protocols enabled on the switch. A value of one in the bit map means the corresponding protocol is enabled. Zero means the protocol is disabled. The bit definition is as follow: mstp(0) lacp(1) ieee802dot1x(2) gvrp(3) igmp(4) 802.1ag(5) Y.1731(6) ccmOffload(7) erps(8) slaMeasurement(9)
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.11INTEGER (0..1023)read-createcurrent
pvxSwitchTunnMacAddrProfile
OBJECT-TYPE
The name of the Tunnel MAC Address profile used by the switch.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.12ProfileNameTyperead-createcurrent
pvxSwitchEvcMEGName
OBJECT-TYPE
Name of the EVC Maintanence Entity Group. Maximum length is 6 characters. Default value is set to BTI by the system.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.13DisplayString (SIZE(1..6))read-createcurrent
pvxSwitchEvcMEGLevel
OBJECT-TYPE
The EVC Maintanence Entity Group Level.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.14INTEGER (1..7)read-createcurrent
pvxSwitchName
OBJECT-TYPE
The switch name string.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.15DisplayString (SIZE(1..32))read-createcurrent
pvxSwitchMIPAutoCreate
OBJECT-TYPE
This field controls MIP auto-creation funcion. When set true, MIPs are created automatically.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.16TruthValueread-createcurrent
pvxSwitchMIPAutoCreateMEL
OBJECT-TYPE
The maintanence entity Level at which MIPs are auto created.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.17INTEGER (1..7)read-createcurrent
pvxSwitchStackingPrimary
OBJECT-TYPE
The instance number of the primary PacketVX.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.18Integer32read-onlycurrent
pvxSwitchStackingTimeAsPrimary
OBJECT-TYPE
The number of seconds that the stacking primary has remained as primary.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.19Integer32read-onlycurrent
pvxSwitchErpsVlanPropagate
OBJECT-TYPE
This provides option the user to control how the user traffic needs to be converged in case of ERPS ring failures. With fast option, user traffic converges in the order of ERPS times. The side effect is there is redundant traffic all over rings. With slow option, user traffic flows on the shortest possible path. There is no extra traffic all over the ring. But, when ERPS ring failures occur, the convergence times will not be in the order of ERPS convergence times.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.20INTEGER {fast(1), slow(2)}read-createcurrent
pvxSwitchCfmDestinationAddress
OBJECT-TYPE
This provides an option to the user to control CCM message destination address which will scale down time necessary to process CCM messages.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.21INTEGER {unicast(1), multicast(2)}read-createcurrent
pvxSwitchIntfBouncingTimerPeriod
OBJECT-TYPE
A timer interval in seconds used to detect port bouncing state.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.22INTEGER (1..15)read-createcurrent
pvxSwitchRowStatus
OBJECT-TYPE
Used to control the addition and deletion of entries in the switch table, which in turn controls provisioning and deprovisioning of the switches.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.100RowStatusread-createcurrent
pvxSwitchMemberTable
OBJECT-TYPE
This table is used to configure the members of a virtual switch. Each member corresponds to the physical pack in the system.
1.3.6.1.4.1.18070.2.2.1.14.1.2not-accessiblecurrent
pvxSwitchMemberEntry
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.2.1not-accessiblecurrent
pvxSwitchMemberIdx
OBJECT-TYPE
An index represents the switch ID. It can be from 1 to 11.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.1INTEGER (1..11)accessible-for-notifycurrent
pvxSwitchMemberInstIdx
OBJECT-TYPE
An index represents the member ID. It can be from 1 to 2.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.2INTEGER (1..2)accessible-for-notifycurrent
pvxSwitchMemberShelfId
OBJECT-TYPE
The number of the shelf on which the member is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.3INTEGER (1 | 11 | 21 | 31)read-createcurrent
pvxSwitchMemberSlotId
OBJECT-TYPE
The number of the slot on which the member is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.4INTEGER (1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)read-createcurrent
pvxSwitchMemberStackingState
OBJECT-TYPE
If the AdminState is disabled, the stacking state will be disabled. If there is only one PacketVX enabled in the switch, the value of this variable will be unstacked. If there is more than one PacketVX, then the card running the control plane will be primary, any other cards will be secondary. If there is no PacketVX in the slot, the StackingState is notPresent
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.8INTEGER {disabled(1), unstacked(2), primary(3), secondary(4), notPresent(5)}read-onlycurrent
pvxSwitchMemberStackingPortCommState
OBJECT-TYPE
If the redundancy manager believes it can communicate with its peer across the stacking port, the value of this variable will be connectionOk. Otherwise, it will be noConnection.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.9PvxStackingPortCommStateread-onlycurrent
pvxSwitchMemberBackplaneCommState
OBJECT-TYPE
If the redundancy manager believes it can communicate with its peer across the backplane, the value of this variable will be connectionOk. Otherwise, it will be noConnection.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.10PvxStackingPortCommStateread-onlycurrent
pvxSwitchMemberRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.100RowStatusread-createcurrent
pvxVLANTable
OBJECT-TYPE
This table is used to configure the Vlan related entries on a particular port of a virtual switch member.
1.3.6.1.4.1.18070.2.2.1.14.1.4not-accessiblecurrent
pvxVLANEntry
OBJECT-TYPE
The conceptual row object of the Vlan Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1not-accessiblecurrent
pvxVLANSwitchIdx
OBJECT-TYPE
This object represents the particular switch id on which Vlan is configured.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.1INTEGER (1..11)not-accessiblecurrent
pvxVLANIdx
OBJECT-TYPE
This object is the index of the Vlan id of the CP.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.2INTEGER (1..4094)not-accessiblecurrent
pvxVLANMemberPortList
OBJECT-TYPE
This object represents a single ingress port or set of ports which can be configured for a particular vlan. The format of the set request for this object will depend on the value of the vlanPortListOpType object being sent in the set request. Note: The set request will fail if the syntax of the value is not exactly the same as defined by vlanPortListOpType description.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.4PvxL2PortListread-createcurrent
pvxVLANUnTaggedPortList
OBJECT-TYPE
The set of ports which are transmitting traffic for this VLAN as untagged frames. Note: The set request will fail if the syntax of the value is not exactly the same as defined by vlanPortListOpType description.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.5PvxL2PortListread-createcurrent
pvxVLANMacLearning
OBJECT-TYPE
This object is used to configure the Vlan Mac learnining
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.6INTEGER {enable(1), disable(2)}read-createcurrent
pvxVLANAdminState
OBJECT-TYPE
The administrative status of the Vlan.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.7INTEGER {enable(1), disable(2)}read-createcurrent
pvxVLANMSTPId
OBJECT-TYPE
An alpha-numeric book keeping attribute for the VLAN.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.8Integer32read-createcurrent
pvxVLANService
OBJECT-TYPE
Name of the service associated with this VLAN. If no service is associated with the value is a zero length string.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.9DisplayString (SIZE(0..32))read-onlycurrent
pvxVLANForbiddenPortList
OBJECT-TYPE
The set of ports which GVRP is forbidden to learn.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.10PvxL2PortListread-createcurrent
pvxVLANOperStatus
OBJECT-TYPE
The current operational state of the VLAN.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.11INTEGER {up(1), down(2), reserved(3)}read-onlycurrent
pvxVLANRowStatus
OBJECT-TYPE
This object is used to create a new row in the vlan table.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.100RowStatusread-createcurrent
pvxFDBTable
OBJECT-TYPE
This table is used to configure the MAC (FDB) related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.5not-accessiblecurrent
pvxFDBEntry
OBJECT-TYPE
The conceptual row object of the forwardinngDB table.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1not-accessiblecurrent
pvxFDBSwitchIdx
OBJECT-TYPE
This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.1INTEGER (1..11)not-accessiblecurrent
pvxFDBVlanIdx
OBJECT-TYPE
This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.2Integer32not-accessiblecurrent
pvxFDBMACAddrIdx
OBJECT-TYPE
This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.3MacAddressnot-accessiblecurrent
pvxFDBPort
OBJECT-TYPE
This object represents the port of the forwarding Database.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.4PvxL2Portread-onlycurrent
pvxFDBAddressType
OBJECT-TYPE
The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of pvxFDBIntfId, nor an entry in the dot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1qTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of dot1qTpFdbAddress represents one of the device's addresses. The corresponding instance of dot1qTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress is also the value of an existing instance of dot1qStaticAddress.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.5INTEGER {other(1), invalid(2), learned(3), self(4), mgmt(5)}read-onlycurrent
pvxFDBRowStatus
OBJECT-TYPE
This object is used to create a new row in the FDB table.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.6RowStatusread-createcurrent
pvxStaticUnicastTable
OBJECT-TYPE
A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.6not-accessiblecurrent
pvxStaticUnicastEntry
OBJECT-TYPE
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1not-accessiblecurrent
pvxStaticUnicastSwitchIdx
OBJECT-TYPE
This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.1INTEGER (1..11)not-accessiblecurrent
pvxStaticUnicastVlanIdx
OBJECT-TYPE
This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.2INTEGER (1..4095)not-accessiblecurrent
pvxStaticUnicastMACAddrIdx
OBJECT-TYPE
This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.3MacAddressnot-accessiblecurrent
pvxStaticUnicastReceivePort
OBJECT-TYPE
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.4PvxL2Portnot-accessiblecurrent
pvxStaticUnicastIntfIdList
OBJECT-TYPE
The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.5PvxVLANPortListread-createcurrent
pvxStaticUnicastAddressType
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.6INTEGER {other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)}read-createcurrent
pvxStaticUnicastRowStatus
OBJECT-TYPE
This object is used to create a new row in the static unicast table.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.100RowStatusread-createcurrent
pvxMultiCastGroupTable
OBJECT-TYPE
This table is used to configure the multicast table related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.7not-accessiblecurrent
pvxMultiCastEntry
OBJECT-TYPE
The conceptual row object of the forwardinngDB table.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1not-accessiblecurrent
pvxMCSwitchIdx
OBJECT-TYPE
This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.1INTEGER (1..11)not-accessiblecurrent
pvxMCVlanIdx
OBJECT-TYPE
This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.2Integer32not-accessiblecurrent
pvxMCMACAddrIdx
OBJECT-TYPE
This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.3MacAddressnot-accessiblecurrent
pvxMCIntfIdList
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.4PvxVLANPortListread-onlycurrent
pvxMCRowStatus
OBJECT-TYPE
This object is used to create a new row in the MCG table.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.6RowStatusread-createcurrent
pvxStaticMulticastTable
OBJECT-TYPE
A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.8not-accessiblecurrent
pvxStaticMulticastEntry
OBJECT-TYPE
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1not-accessiblecurrent
pvxStaticMCSwitchIdx
OBJECT-TYPE
This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.1INTEGER (1..11)not-accessiblecurrent
pvxStaticMCVlanIdx
OBJECT-TYPE
This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.2INTEGER (1..4095)not-accessiblecurrent
pvxStaticMCMACAddrIdx
OBJECT-TYPE
This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.3MacAddressnot-accessiblecurrent
pvxStaticMCReceivePort
OBJECT-TYPE
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.4PvxL2Portnot-accessiblecurrent
pvxStaticMCStaticIntfIdList
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.5PvxVLANPortListread-createcurrent
pvxStaticMCForbiddenIntfIdList
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.6PvxVLANPortListread-createcurrent
pvxStaticMCAddressType
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.7INTEGER {other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)}read-createcurrent
pvxStaticMCRowStatus
OBJECT-TYPE
This object is used to create a new row in the static multicast table.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.100RowStatusread-createcurrent
pvxLagTable
OBJECT-TYPE
This table is used to configure the link aggregation at system level.
1.3.6.1.4.1.18070.2.2.1.14.1.9not-accessiblecurrent
pvxLagEntry
OBJECT-TYPE
The conceptual row object of the lag Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1not-accessiblecurrent
pvxLagSwitchIdx
OBJECT-TYPE
This object represents the particular switch id .
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.1INTEGER (1..11)not-accessiblecurrent
pvxLagState
OBJECT-TYPE
The administrative status.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.2INTEGER {enable(1), disable(2)}read-createcurrent
pvxLagSystemPriority
OBJECT-TYPE
This object represents the lag system priority.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.3Integer32read-createcurrent
pvxLagSystemIdentifier
OBJECT-TYPE
This object is used to identify the particular lag ID.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.4DisplayStringread-onlycurrent
pvxLagRowStatus
OBJECT-TYPE
This object is used to create a new row in the lag table.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.100RowStatusread-createcurrent
pvxLagGroupTable
OBJECT-TYPE
This table is used to configure the link aggregation protocol related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.10not-accessiblecurrent
pvxLagGroupEntry
OBJECT-TYPE
The conceptual row object of the lag Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1not-accessiblecurrent
pvxLGSwitchIdx
OBJECT-TYPE
This object represents the particular switch id of lag group.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.1INTEGER (1..11)not-accessiblecurrent
pvxLGIdx
OBJECT-TYPE
This is the id index of the lagGroup.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.2Integer32not-accessiblecurrent
pvxLGPortList
OBJECT-TYPE
Each entry in this list is for each physical port that participates in Link Aggregation which can be either aggregatable or individual.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.3PvxPhyPortListread-onlycurrent
pvxLGDistribution
OBJECT-TYPE
This object represents the distribution method for LAG traffic.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.4INTEGER {srcmac(1), dstmac(2), srcdstmac(3), srcip(4), dstip(5), srcdstip(6)}read-createcurrent
pvxLGMacAddress
OBJECT-TYPE
This object represents the MAC address of the LAG group
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.6MacAddressread-onlycurrent
pvxLGPortCount
OBJECT-TYPE
The number of ports actually configured to the LAG group
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.7Integer32read-onlycurrent
pvxLGActivePortCount
OBJECT-TYPE
This object will give the number of ports that are attached to the LAG group and actively carrying data traffic on the link.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.8Integer32read-onlycurrent
pvxLGMtuSize
OBJECT-TYPE
This object will give the MTU size of the LAG group
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.9Integer32read-createcurrent
pvxLGAdminStatus
OBJECT-TYPE
Sets the Link Aggregation Module administrative status as enabled or disabled.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
pvxLGOperStatus
OBJECT-TYPE
This read only objects gives actual status of the Link Aggregation Module (Operational status of module). When Module is enabled Link Aggregation protocol starts functioning. When the module is disabled all the dynamically allocated memory will be freed and Link Aggregation protocol stops functioning.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.11OperStatusread-onlycurrent
pvxLGDataRate
OBJECT-TYPE
The current data rate, in megabits per second, of the aggregate link. The value is calculated as N times the data rate of a single link in the aggregation, where N is the number of active links.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.12INTEGER (1..1000000)read-onlycurrent
pvxLGRowStatus
OBJECT-TYPE
This object is used to create a new row in the lagConfig table.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.100RowStatusread-createcurrent
pvxLagPortTable
OBJECT-TYPE
This table is used to configure the link aggregation protocol related entries. TODO: Need to re-check the index here, and what is pvxLagPortId
1.3.6.1.4.1.18070.2.2.1.14.1.11not-accessiblecurrent
pvxLagPortEntry
OBJECT-TYPE
The conceptual row object of the lag Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1not-accessiblecurrent
pvxLagPortSwitchIdx
OBJECT-TYPE
This object represents the particular switch id of lag group.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.1INTEGER (1..11)not-accessiblecurrent
pvxLagPortShelfIdx
OBJECT-TYPE
This is the id index of the lagGroup.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
pvxLagPortSlotIdx
OBJECT-TYPE
The is the slot number for the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.3INTEGER (1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxLagPortTypeIdx
OBJECT-TYPE
This object is port type of the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.4PvxPortTypenot-accessiblecurrent
pvxLagPortIdx
OBJECT-TYPE
This object is the port number of the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.5Integer32not-accessiblecurrent
pvxLagPortPriority
OBJECT-TYPE
This object represents the lag port priority
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.6Integer32read-createcurrent
pvxLagPortMode
OBJECT-TYPE
This object is used to enable LACP , disable LACP or manually aggregate a port
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.7INTEGER {active(1), passive(2), on(3)}read-createcurrent
pvxLagPortAggState
OBJECT-TYPE
This read-only object is used to display the port state in aggregation inBndl(1) - The port is operationally up and actively takes part in aggregation. standby(2) - The port is capable of joining in aggregation group, when any of the ports in aggregation group goes down. down(3) - The port is operationally down in lower layers. or the port is operational in lower layers but temporarily not able to participate in aggregation because of different partner information in the same group. alone(4) - The port is operating individually and is not taking part in aggregation.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.8INTEGER {inbndl(1), stdby(2), down(3), alone(4)}read-onlycurrent
pvxLagPortLcapId
OBJECT-TYPE
This object sets the global LCAP System ID.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.9Integer32read-createcurrent
pvxLagPortTimeout
OBJECT-TYPE
This object sets the LACP timeout period. long(1) - LACP PDU will be sent every 30 seconds and LACP timeout value (no packet is received from peer) is 90 seconds short(2) - LACP PDU will be sent every 1 second and timeout value is 3 seconds.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.10INTEGER {long(1), short(2)}read-createcurrent
pvxLagPortWaitTime
OBJECT-TYPE
Duration of time for the port to attach to the LAG group.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.11Integer32read-createcurrent
pvxLagPortActAdminState
OBJECT-TYPE
This object is the actors administrative state.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.12Integer32read-onlycurrent
pvxLagPortPrtnrAdminState
OBJECT-TYPE
This object is the partners administrative state.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.13Integer32read-onlycurrent
pvxLagPortGroupId
OBJECT-TYPE
This object is the LAG group id associated with the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.14Integer32read-createcurrent
pvxLagPortRowStatus
OBJECT-TYPE
This object is used to create a new row in the lagConfig table.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.100RowStatusread-createcurrent
pvxMSTPGenTable
OBJECT-TYPE
This table is used to configure the Spanning Tree protocol on a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.12not-accessiblecurrent
pvxMSTPGenEntry
OBJECT-TYPE
The conceptual row object of the packet Spanning Tree protocol config table.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1not-accessiblecurrent
pvxMSTPGenSwitchIdx
OBJECT-TYPE
This object represents the switch id of the MSTP Gen.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPGenMaxHops
OBJECT-TYPE
This object represents the maximum hops that can be configured.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.2INTEGER (1..40)read-createcurrent
pvxMSTPGenVersionSupported
OBJECT-TYPE
This object is used to read the supported version
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.3INTEGER {unknown(1), nonStp(2), dot1d(3), dot1w(4), dot1s(5), dot1q(6)}read-onlycurrent
pvxMSTPGenIdFmtSel
OBJECT-TYPE
This object is used to configure the Frame Selection on particular virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.4Integer32read-onlycurrent
pvxMSTPGenIdName
OBJECT-TYPE
This object is used to configure MSTP ID name on a particular virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.5DisplayStringread-createcurrent
pvxMSTPGenIdRevisionLevel
OBJECT-TYPE
This object represents MSTP Revision Level in seconds.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.6Integer32read-createcurrent
pvxMSTPGenIdDigest
OBJECT-TYPE
This object represents MSTP ID digest value.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.7DisplayStringread-onlycurrent
pvxMSTPGenRegionalRoot
OBJECT-TYPE
This object represents the mstp Regional Root .
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.8DisplayStringread-onlycurrent
pvxMSTPGenExternalRootCost
OBJECT-TYPE
This represents the mstp External Root Cost .
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.9Integer32read-onlycurrent
pvxMSTPGenCistPriority
OBJECT-TYPE
This CIST priority of this bridge.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.10INTEGER (0..61440)read-createcurrent
pvxMSTPGenBrdgId
OBJECT-TYPE
The bridge ID.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.11DisplayStringread-onlycurrent
pvxMSTPGenCistRoot
OBJECT-TYPE
The root of the CIST.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.12DisplayStringread-onlycurrent
pvxMSTPGenCistRootPriority
OBJECT-TYPE
The priority of the CIST root.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.13INTEGER (0..61440)read-onlycurrent
pvxMSTPGenCistRootCost
OBJECT-TYPE
The cost of the CIST root bridge.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.14Integer32read-onlycurrent
pvxMSTPMapTable
OBJECT-TYPE
This table is used to configure the Spanning Tree Map on a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.13not-accessiblecurrent
pvxMSTPMapEntry
OBJECT-TYPE
The conceptual row object of the MSTP Map table.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1not-accessiblecurrent
pvxMSTPMapSwitchIdx
OBJECT-TYPE
This object represents the switch id of the mstp map.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPMapIdx
OBJECT-TYPE
This object represents the mstp map index.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.2Integer32not-accessiblecurrent
pvxMSTPMapVlanS1k
OBJECT-TYPE
This object is used to configure 1k Vlans
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.3PvxMSTPVlanListread-createcurrent
pvxMSTPMapVlanS2k
OBJECT-TYPE
This object is used to configure 2k Vlans.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.4PvxMSTPVlanListread-createcurrent
pvxMSTPMapVlanS3k
OBJECT-TYPE
This object is used to configure configure 3k Vlans.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.5PvxMSTPVlanListread-createcurrent
pvxMSTPMapVlanS4k
OBJECT-TYPE
This object is used to configure configure 4k Vlans.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.6PvxMSTPVlanListread-createcurrent
pvxMSTPMapRowStatus
OBJECT-TYPE
Used to control the addition and deletion of entries in the mstp table.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.100RowStatusread-createcurrent
pvxMSTPPortTable
OBJECT-TYPE
This table is used to configure the Spanning tree port related entries. TODO: This table needs to change to be able to deal with indexing based on shelf and slot. If the index has switch associated with it , that will mean that we are dealing with layer 2 ports.
1.3.6.1.4.1.18070.2.2.1.14.1.14not-accessiblecurrent
pvxMSTPPortEntry
OBJECT-TYPE
The conceptual row object of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1not-accessiblecurrent
pvxMSTPPortSwitchIdx
OBJECT-TYPE
This object represents the particular switch id .
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPPortShelfIdx
OBJECT-TYPE
The instace Id of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxMSTPPortSlotIdx
OBJECT-TYPE
This is the port index of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxMSTPPortTypeIdx
OBJECT-TYPE
This is the port index of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.4PvxPortTypenot-accessiblecurrent
pvxMSTPPortIdx
OBJECT-TYPE
This is the port index of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.5Integer32not-accessiblecurrent
pvxMSTPPortDesignatedRoot
OBJECT-TYPE
This is the designated root.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.6DisplayStringread-onlycurrent
pvxMSTPPortDesignatedBridge
OBJECT-TYPE
This is the designated bridge ID.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.7DisplayStringread-onlycurrent
pvxMSTPPortDesignatedPort
OBJECT-TYPE
This is the designated port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.8Integer32read-onlycurrent
pvxMSTPPortPathCost
OBJECT-TYPE
This is the path cost.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.9Integer32read-createcurrent
pvxMSTPPortPriority
OBJECT-TYPE
This is the port priority.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.10Integer32read-createcurrent
pvxMSTPPortState
OBJECT-TYPE
This is the port state.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.11INTEGER {unknown(1), disabled(2), discarding(3), learning(4), forwarding(5)}read-onlycurrent
pvxMSTPPortRole
OBJECT-TYPE
This is the port role.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.12INTEGER {disabled(1), alternate(2), backup(3), root(4), designated(5), nonSTP(6)}read-onlycurrent
pvxMSTPPortRegRoot
OBJECT-TYPE
This is the port's reg root.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.13DisplayStringread-onlycurrent
pvxMSTPPortRegRootCost
OBJECT-TYPE
This is the port's reg root cost.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.14Integer32read-onlycurrent
pvxMSTPPortRestrictedRole
OBJECT-TYPE
This is the port's restricted role.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.15TruthValueread-createcurrent
pvxMSTPPortRestrictedTCN
OBJECT-TYPE
This is the port's restricted TCN.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.16TruthValueread-createcurrent
pvxMSTPPortForcedPortState
OBJECT-TYPE
This is the port's forced port state.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.17INTEGER {enable(1), disable(2)}read-createcurrent
pvxMSTPPortLoopGuardState
OBJECT-TYPE
This is the port's Loop Guard state.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.18INTEGER {enable(1), disable(2)}read-createcurrent
pvxMSTPPortLinkType
OBJECT-TYPE
The link type of this port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.19INTEGER {shared(1), point-to-point(2)}read-createcurrent
pvxMSTPXstTable
OBJECT-TYPE
This table is used to configure the Mstp Xst related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.15not-accessiblecurrent
pvxMSTPXstEntry
OBJECT-TYPE
The conceptual row object of the mstpXst table.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1not-accessiblecurrent
pvxMSTPXstSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPXstIdx
OBJECT-TYPE
The instance of the mstpXst Id.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.2INTEGER (1..16)not-accessiblecurrent
pvxMSTPXstBrdgPriority
OBJECT-TYPE
This Bridge priority.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.3INTEGER (0..61440)read-createcurrent
pvxMSTPXstBrdgId
OBJECT-TYPE
The bridge ID.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.4DisplayStringread-onlycurrent
pvxMSTPXstBrdgRegRoot
OBJECT-TYPE
The bridge Reg Root.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.5DisplayStringread-onlycurrent
pvxMSTPXstBrdgRegRootCost
OBJECT-TYPE
The root cost of destination bridge.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.6INTEGER (1..65535)read-onlycurrent
pvxMSTPXstRootPort
OBJECT-TYPE
The root port number.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.7PvxL2Portread-onlydeprecated
pvxMSTPXstRootPortSwitch
OBJECT-TYPE
The Switch ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.8INTEGER (1..11)read-onlycurrent
pvxMSTPXstRootPortShelf
OBJECT-TYPE
The shelf ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.9INTEGER (0 | 1 | 11 | 21 | 31)read-onlycurrent
pvxMSTPXstRootPortSlot
OBJECT-TYPE
The slot ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.10INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)read-onlycurrent
pvxMSTPXstRootPortType
OBJECT-TYPE
The port type of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.11PvxPortTyperead-onlycurrent
pvxMSTPXstRootPortNum
OBJECT-TYPE
The port ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.12INTEGER (1..28)read-onlycurrent
pvxMSTPXstPortTable
OBJECT-TYPE
This table is used to configure the mstp Xst Port related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.16not-accessiblecurrent
pvxMSTPXstPortEntry
OBJECT-TYPE
The conceptual row object of the mstp Xst Port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1not-accessiblecurrent
pvxMSTPXstPortSwitchIdx
OBJECT-TYPE
This object represents the particular switch id of mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.1INTEGER (1..11)not-accessiblecurrent
pvxMSTPXstPortShelfIdx
OBJECT-TYPE
The instace index of the mstp Xst Port table .
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxMSTPXstPortSlotIdx
OBJECT-TYPE
The instace index of the mstp Xst Port table .
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxMSTPXstPortTypeIdx
OBJECT-TYPE
The instace index of the mstp Xst Port table .
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.4PvxPortTypenot-accessiblecurrent
pvxMSTPXstPortInstIdx
OBJECT-TYPE
This Xst instance index of the mstpXstPort table.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.5INTEGER (1..16)not-accessiblecurrent
pvxMSTPXstPortIdx
OBJECT-TYPE
This port instance of the mstpXstPort table.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.6INTEGER (1..28)not-accessiblecurrent
pvxMSTPXstPortState
OBJECT-TYPE
The port state of the mstp Xst.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.7INTEGER {unknown(1), disabled(2), discarding(3), learning(4), forwarding(5)}read-onlycurrent
pvxMSTPXstPortRole
OBJECT-TYPE
The role of the participating port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.8INTEGER {disabled(1), alternate(2), backup(3), root(4), designated(5), master(6), nonSTP(7)}read-onlycurrent
pvxMSTPXstPortDesigRoot
OBJECT-TYPE
The designated root attribute of the mstp Xst Port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.9DisplayStringread-onlycurrent
pvxMSTPXstPortDesigCost
OBJECT-TYPE
The root cost of the mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.10Integer32read-onlycurrent
pvxMSTPXstPortDesigBridge
OBJECT-TYPE
The designated bridge ID of the mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.11DisplayStringread-onlycurrent
pvxMSTPXstPortDesigPortId
OBJECT-TYPE
The designated port id of the mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.12Integer32read-onlycurrent
pvxMSTPXstPortPriority
OBJECT-TYPE
The port priority of the mstp Xst Port
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.13Integer32read-createcurrent
pvxMSTPXstPortPathCost
OBJECT-TYPE
This path cost of the mstpXst port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.14Integer32read-createcurrent
pvxMSTPXstPortForcedPortState
OBJECT-TYPE
This is the port's forced port state.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.15INTEGER {enable(1), disable(2)}read-createcurrent
pvxNextFreeIndexTable
OBJECT-TYPE
This table is used to find the next free index in some tables that use integer indices.
1.3.6.1.4.1.18070.2.2.1.14.1.17not-accessiblecurrent
pvxNextFreeIndexEntry
OBJECT-TYPE
The conceptual row object of the Next Free Index Table.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1not-accessiblecurrent
pvxNextFreeIndexTableIndex
OBJECT-TYPE
This object indicates from which table to fetch the next free index.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1.1INTEGER {none(1), lagGroup(70), switches(84), flowclass(87), vlan(93)}not-accessiblecurrent
pvxNextFreeIndexSwitchIdx
OBJECT-TYPE
This object represents the particular switch id to fetch.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1.2INTEGER (1..11)not-accessiblecurrent
pvxNextFreeIndexValue
OBJECT-TYPE
The value of the next free index in the specified table on the specified switch.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1.3Integer32read-onlycurrent
pvxUNITable
OBJECT-TYPE
This table defines all User Network Interfaces on all swotches.
1.3.6.1.4.1.18070.2.2.1.14.1.18not-accessiblecurrent
pvxUNIEntry
OBJECT-TYPE
The conceptual row object of the UNI Table
1.3.6.1.4.1.18070.2.2.1.14.1.18.1not-accessiblecurrent
pvxUNISwitchId
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.1INTEGER (1..11)not-accessiblecurrent
pvxUNIShelfId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxUNISlotId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxUNIPortTypeId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.4PvxPortTypenot-accessiblecurrent
pvxUNIPortId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.5Integer32not-accessiblecurrent
pvxUNISpeed
OBJECT-TYPE
Speed of the UNI in mb/sec
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.6Integer32read-onlycurrent
pvxUNIMode
OBJECT-TYPE
Full/half duplex mode of the UNI
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.7INTEGER {fullDuplex(1), halfDuplex(2)}read-onlycurrent
pvxUNIMaxFrameSize
OBJECT-TYPE
Maximum Frame size for the UNI
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.8INTEGER (1522..9600)read-createcurrent
pvxUNICurrentFrameSize
OBJECT-TYPE
The maximum of the Max Frame Size of all the services associated with the UNI.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.9INTEGER (1522..9600)read-onlycurrent
pvxUNIServiceType
OBJECT-TYPE
A combination of the MEF variables for multiplexing, bundling and all-in-bundling.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.10INTEGER {unspecified(1), private(2), virtualSingle(3), virtualMultiple(4), virtualUntagged(5)}read-createcurrent
pvxUNINumServices
OBJECT-TYPE
The number of services that attach to this UNI.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.11Integer32read-onlycurrent
pvxUNICPVid
OBJECT-TYPE
The Port VLAN Id at the customer level for this UNI. This field is valid only if UNIServiceType is virtualSingle, virtualMultiple, or virtualUntagged.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.12INTEGER (0..4094)read-createcurrent
pvxUNIRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.100RowStatusread-createcurrent
pvxNNITable
OBJECT-TYPE
This table defines all User Network Interfaces on all swotches.
1.3.6.1.4.1.18070.2.2.1.14.1.19not-accessiblecurrent
pvxNNIEntry
OBJECT-TYPE
The conceptual row object of the NNI Table
1.3.6.1.4.1.18070.2.2.1.14.1.19.1not-accessiblecurrent
pvxNNISwitchId
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.1INTEGER (1..11)not-accessiblecurrent
pvxNNIShelfId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxNNISlotId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxNNIPortTypeId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.4PvxPortTypenot-accessiblecurrent
pvxNNIPortId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.5Integer32not-accessiblecurrent
pvxNNISpeed
OBJECT-TYPE
Speed of the NNI in mb/sec
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.6Integer32read-onlycurrent
pvxNNIMode
OBJECT-TYPE
Full/half duplex mode of the NNI
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.7INTEGER {fullDuplex(1), halfDuplex(2)}read-onlycurrent
pvxNNIMaxFrameSize
OBJECT-TYPE
Maximum Frame size for the NNI
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.8INTEGER (1526..9600)read-createcurrent
pvxNNIRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.100RowStatusread-createcurrent
pvxVlanPortTable
OBJECT-TYPE
This table is used to configure Vlan port related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.20not-accessiblecurrent
pvxVlanPortEntry
OBJECT-TYPE
The conceptual row object of the vlan port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1not-accessiblecurrent
pvxVlanPortSwitchIdx
OBJECT-TYPE
This object represents the particular switch id .
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.1INTEGER (1..11)not-accessiblecurrent
pvxVlanPortShelfIdx
OBJECT-TYPE
This represents the shelf this port belongs to.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxVlanPortSlotIdx
OBJECT-TYPE
This represents the slot this port belogs to.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxVlanPortTypeIdx
OBJECT-TYPE
This represents the port type.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.4PvxPortTypenot-accessiblecurrent
pvxVlanPortIdx
OBJECT-TYPE
This is the port index of the vlan port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.5INTEGER (1..24)not-accessiblecurrent
pvxVlanPortGvrpAdminState
OBJECT-TYPE
The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as the global GVRP status is enabled on the switch. When disabled(2) but global GVRP is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.6INTEGER {enable(1), disable(2)}read-createcurrent
pvxVlanPortRestrictedVlanState
OBJECT-TYPE
The state of Restricted VLAN Registration on this port. If the value of this control is enabled(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned. If the value is set to disabled(2), dynamic vlan participation is allowed.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.7INTEGER {enable(1), disable(2)}read-createcurrent
pvxVlanPortEthPortAllowedFrametType
OBJECT-TYPE
When the value is admitOnlyVlanTagged(2) port will discard untagged frames or Priority-Tagged frames. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for this port. When this is admitOnlyUntaggedAndPriorityTagged the device will recieve only untagged and priority tagged frames on this port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.8INTEGER {admitAll(1), admitOnlyVlanTagged(2), admitOnlyUntaggedAndPriorityTagged(3), admitDefault(4)}read-onlycurrent
pvxVlanPortIngressFiltering
OBJECT-TYPE
When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.9INTEGER {true(1), false(2)}read-onlydeprecated
pvxVlanPortGvrpFailedRegistrations
OBJECT-TYPE
The total number of failed GVRP registrations, for any reason, on this port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.10Integer32read-onlycurrent
pvxVlanPortLastBpduOrigin
OBJECT-TYPE
The Source MAC Address of the last GVRP message received on this port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.11MacAddressread-onlycurrent
pvxVlanCurrentTable
OBJECT-TYPE
This table is used to retrieve Vlan related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.21not-accessiblecurrent
pvxVlanCurrentEntry
OBJECT-TYPE
The conceptual row object of the vlan entity.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1not-accessiblecurrent
pvxVlanCurrentSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.1INTEGER (1..11)not-accessiblecurrent
pvxVlanCurrentTimeMark
OBJECT-TYPE
A TimeFilter for this entry.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.2Unsigned32not-accessiblecurrent
pvxVlanCurrentVlanIdx
OBJECT-TYPE
Represents the VLAN IDs in the system
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.3INTEGER (1..4094)not-accessiblecurrent
pvxVlanCurrentStatus
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in the static vlan table that is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from static entry and ports learnt dynamically. dynamicGVRP(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN and it will be removed when the last port leaves the VLAN.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.4INTEGER {other(1), permanent(2), dynamicGVRP(3)}read-onlycurrent
pvxVlanCurrentCreationTime
OBJECT-TYPE
The value of sysUpTime when this VLAN was created.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.5Integer32read-onlycurrent
pvxDynamicVlanPortTable
OBJECT-TYPE
This table is used to configure Vlan Egress port related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.24not-accessiblecurrent
pvxDynamicVlanPortEntry
OBJECT-TYPE
The conceptual row object of the vlan egress port.
1.3.6.1.4.1.18070.2.2.1.14.1.24.1not-accessiblecurrent
pvxDynamicVlanPortTimeMark
OBJECT-TYPE
A TimeFilter for this entry.
1.3.6.1.4.1.18070.2.2.1.14.1.24.1.1Unsigned32not-accessiblecurrent
pvxDynamicVlanPortVlanIdx
OBJECT-TYPE
Represents the VLAN IDs in the system
1.3.6.1.4.1.18070.2.2.1.14.1.24.1.2INTEGER (1..4094)not-accessiblecurrent
pvxDynamicVlanPortTagged
OBJECT-TYPE
Indicates whether the port is a tagged or a untagged member in the VLAN. tagged - to add the port in the tagged portlist. untagged - to add the port in the untagged portlist.
1.3.6.1.4.1.18070.2.2.1.14.1.24.1.3INTEGER {tagged(1), untagged(2)}read-onlycurrent
pvxStackingPortTable
OBJECT-TYPE
This table allows the administrator to configure which port or ports will be used as teh stacking port or ports between the PacketVXes in the switch.
1.3.6.1.4.1.18070.2.2.1.14.1.25not-accessiblecurrent
pvxStackingPortEntry
OBJECT-TYPE
The conceptual row object of the stacking port.
1.3.6.1.4.1.18070.2.2.1.14.1.25.1not-accessiblecurrent
pvxStackingPortOperStatus
OBJECT-TYPE
Indicates the current operational state of te stacking port.
1.3.6.1.4.1.18070.2.2.1.14.1.25.1.1INTEGER {up(1), down(2), notPresent(3)}read-onlycurrent
pvxStackingPortRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.1.25.1.100RowStatusread-createcurrent
pvxBridgeServices
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.14.2
pvxFlowTable
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.12not-accessiblecurrent
pvxFlowEntry
OBJECT-TYPE
The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.12.1not-accessiblecurrent
pvxFSwitchIdx
OBJECT-TYPE
This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.1INTEGER (1..11)not-accessiblecurrent
pvxFIdx
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.2Integer32not-accessiblecurrent
pvxFClassificationIdList
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.3DisplayStringread-createcurrent
pvxFMeterId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.4Integer32read-createcurrent
pvxFCoSName
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.5DisplayStringread-createcurrent
pvxFRowStatus
OBJECT-TYPE
This object is used to create a new row in the flowClassTable.
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.100RowStatusread-createcurrent
pvxFlowClassificationTable
OBJECT-TYPE
This table is used to configure the Flow classification on virtual switch. A single value or a range of values can be specified in the set request for the filter objects as following # for single or #to# for range of values.
1.3.6.1.4.1.18070.2.2.1.14.2.13not-accessiblecurrent
pvxFlowClassificationEntry
OBJECT-TYPE
The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.13.1not-accessiblecurrent
pvxFloClSwitchIdx
OBJECT-TYPE
This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.1INTEGER (1..11)not-accessiblecurrent
pvxFloClIdx
OBJECT-TYPE
Index of this flow classification on this switch
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.2INTEGER (1..4096)not-accessiblecurrent
pvxFloClActionId
OBJECT-TYPE
The action taken by the switch when this classification is matched; 0 = no action.
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.3INTEGER (0..4096)read-createcurrent
pvxFloClMeterId
OBJECT-TYPE
Meter associated with this flow classification, 0 = no meter
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.4INTEGER (0..4096)read-createcurrent
pvxFloClStatus
OBJECT-TYPE
The administrative status of this entry
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.5INTEGER {enable(1), disable(2)}read-createcurrent
pvxFloClEntryType
OBJECT-TYPE
The administrative status of this entry
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.6INTEGER {untyped(1), ipAcl(2), macAcl(3)}read-createcurrent
pvxFloClL2InterfaceRange
OBJECT-TYPE
Range of interfaces on which this flow classification applies, blank=all interfaces of the form: L2Interface#[-L2Interface#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.7DisplayStringread-createcurrent
pvxFloClCVlanFilter
OBJECT-TYPE
C-VLAN to match, blank=don't care
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.8DisplayStringread-createcurrent
pvxFloClSVlanFilter
OBJECT-TYPE
S-VLAN to match, blank=don't care
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.9DisplayStringread-createcurrent
pvxFloClSourceIPFilter
OBJECT-TYPE
Source IP Address (range or subnet) to match, blank=don't care Of the form: a.b.c.d[-e.f.g.h|/n]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.10DisplayStringread-createcurrent
pvxFloClDestIPFilter
OBJECT-TYPE
Destination IP Address (range or subnet) to match, blank=don't care Of the form: a.b.c.d[-e.f.g.h|/n]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.11DisplayStringread-createcurrent
pvxFloClIPProtocolFilter
OBJECT-TYPE
IP protocol range to match, blank=don't care of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.12DisplayStringread-createcurrent
pvxFloClEtherTypeFilter
OBJECT-TYPE
Ethernet Protoocl Type range to match, blank=don't care of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.13DisplayStringread-createcurrent
pvxFloClSourceMacFilter
OBJECT-TYPE
Source MAC Address (range) to match, blank=don't care Of the form: a.b.c.d.e.f[-g.h.i.j.k.l]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.14DisplayStringread-createcurrent
pvxFloClDestMacFilter
OBJECT-TYPE
Destination MAC Address (range) to match, blank=don't care Of the form: a.b.c.d.e.f[-g.h.i.j.k.l]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.15DisplayStringread-createcurrent
pvxFloClSourceUDPorTCPFilter
OBJECT-TYPE
Source TCP or UDP port to match, blank=don't care Of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.16DisplayStringread-createcurrent
pvxFloClDestUDPorTCPFilter
OBJECT-TYPE
Destination TCP or UDP port to match, blank=don't care Of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.17DisplayStringread-createcurrent
pvxFloClRowStatus
OBJECT-TYPE
This object is used to create a new row in the flowClassTable.
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.100RowStatusread-createcurrent
pvxFlowActionsTable
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.14not-accessiblecurrent
pvxFlowActionsEntry
OBJECT-TYPE
The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1not-accessiblecurrent
pvxFloActSwitchIdx
OBJECT-TYPE
This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.1INTEGER (1..11)not-accessiblecurrent
pvxFloActIdx
OBJECT-TYPE
Index of this flow action on this switch
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.2INTEGER (1..4096)not-accessiblecurrent
pvxFloActChangePriority
OBJECT-TYPE
Should the priority of this flow be re-assigned? If true, the value of the pvxFloActNewPriority will be applied as the new priority for the packets in the stream. If false, the priority is left unchanged.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.3TruthValueread-createcurrent
pvxFloActNewPriority
OBJECT-TYPE
If the pvxFloActChangePriority field is true, the value of this field will be used as the priority of packets in the flow.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.4INTEGER (0..7)read-createcurrent
pvxFloActPacketAction
OBJECT-TYPE
Should we drop, redirect the packets or let them on their way?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.5INTEGER {default(1), drop(2), redirect(3)}read-createcurrent
pvxFloActRedirectToInterfaceIndex
OBJECT-TYPE
When redirecting, Index of L2 Port to which the system should redirect the flow
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.6DisplayStringread-createcurrent
pvxFloActMirrorType
OBJECT-TYPE
What Mirroring action to perform on the flow?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.7INTEGER {none(1), ingress(2), egress(3), both(4)}read-createcurrent
pvxFloActMirrorToInterfaceIndex
OBJECT-TYPE
Index of L2 interface to which the switch will mirror the flow.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.8DisplayStringread-createcurrent
pvxFloActSVlanValue
OBJECT-TYPE
S-VLAN to assign. 0=none
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.9INTEGER (0..4094)read-createcurrent
pvxFloActCVlanValue
OBJECT-TYPE
C-VLAN to assign. 0=none
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.10INTEGER (0..4095)read-createcurrent
pvxFloActSVlanAction
OBJECT-TYPE
What action should be performed on the S-VLAN?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.11INTEGER {none(1), add(2), replace(3)}read-createcurrent
pvxFloActCVlanAction
OBJECT-TYPE
What action should be performed on the C-VLAN
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.12INTEGER {none(1), add(2), replace(3)}read-createcurrent
pvxFloActGreenAction
OBJECT-TYPE
What action should the switch take on Green Packets?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.13INTEGER {doNotDrop(1), drop(2)}read-createcurrent
pvxFloActGreenCNGAction
OBJECT-TYPE
If a green packet of this flow is found, what color should it be changed to?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.14INTEGER {doNotChange(1), green(2), yellow(3), red(4)}read-createcurrent
pvxFloActRedAction
OBJECT-TYPE
What action should the switch take on Red Packets?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.15INTEGER {doNotDrop(1), drop(2)}read-createcurrent
pvxFloActRedCNGAction
OBJECT-TYPE
If a red packet of this flow is found, what color should it be changed to?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.16INTEGER {doNotChange(1), green(2), yellow(3), red(4)}read-createcurrent
pvxFloActYellowAction
OBJECT-TYPE
What action should the switch take on Yellow Packets?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.17INTEGER {doNotDrop(1), drop(2)}read-createcurrent
pvxFloActYellowCNGAction
OBJECT-TYPE
If a yellow packet of this flow is found, what color should it be changed to?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.18INTEGER {doNotChange(1), green(2), yellow(3), red(4)}read-createcurrent
pvxFloActRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.100RowStatusread-createcurrent
pvxFlowMeterTable
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.15not-accessiblecurrent
pvxFlowMeterEntry
OBJECT-TYPE
The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.15.1not-accessiblecurrent
pvxFMSwitchIdx
OBJECT-TYPE
This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.1INTEGER (1..11)not-accessiblecurrent
pvxFMMeterIdx
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.2Integer32not-accessiblecurrent
pvxFMBWProfileId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.3Integer32read-createcurrent
pvxFMMeterProfileId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.4Integer32read-createcurrent
pvxFMRowStatus
OBJECT-TYPE
This object is used to create a new row in the serviceMapTable.
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.100RowStatusread-createcurrent
pvxFlowStatsTable
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16not-accessiblecurrent
pvxFlowStatsEntry
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16.1not-accessiblecurrent
pvxFSSwitchIdx
OBJECT-TYPE
This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.1INTEGER (1..11)not-accessiblecurrent
pvxFSStatsIdx
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.2Integer32not-accessiblecurrent
pvxFSFlowId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.3Integer32read-createcurrent
pvxFSInProfilePackets
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.4Integer32read-createcurrent
pvxFSOutOfProfilePackets
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.5Integer32read-createcurrent
pvxFSCountOfClassifiedPackets
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.6Integer32read-createcurrent
pvxFSRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.100RowStatusread-createcurrent
pvxPbCVidRegistrationTable
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.17not-accessiblecurrent
pvxPbCVidRegistrationTableEntry
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.17.1not-accessiblecurrent
pvxPCVRTCVlanIdFrom
OBJECT-TYPE
The beginning of the range of customer VLAN IDs that the system will map to the service VLAN specified in pvxPCVRTSVlanId.
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.1INTEGER (1..4094)not-accessiblecurrent
pvxPCVRTCVlanIdTo
OBJECT-TYPE
The end of the range of customer VLAN IDs. To specify a single C-VLAN ID, this value should be equal to pvxPCVRTCVlanFrom. This value may never be smaller than pvxPCVRTCVlanFrom.
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.2INTEGER (1..4094)read-createcurrent
pvxPCVRTSVlanId
OBJECT-TYPE
The S-VLAN that the system will assign to any packets that it forwards from this port that had any of the C-VLAN ids in the range pvxPCVRTCVlanIdFrom..pvxPCVRTCVlanIdTo
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.3INTEGER (1..4094)read-createcurrent
pvxPCVRTUntaggedPEP
OBJECT-TYPE
A boolean indicating frames for this specified Customer VLAN identifier ingress at this specified Customer Edge Port (CEP) should be forwarded untagged through the Provider Edge Port (PEP). When it is set to 'True' the C-VLAN tag will be stripped. Otherwise the packet will be sent out with a C-tag and with valid C-VID.
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.4TruthValueread-createcurrent
pvxPCVRTUntaggedCEP
OBJECT-TYPE
A boolean indicating frames for this specified Customer VLAN identifier should be forwarded untagged through this specified Customer Edge Port (CEP). When it is set to 'True' the C-VLAN tag will be stripped. Otherwise the tag will be added if the packet is C-VLAN untagged.
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.5TruthValueread-createcurrent
pvxPCVRTSource
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.6INTEGER {manualCreate(1), autoCreate(2)}read-onlycurrent
pvxPCVRTMapOperStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.7PvxCVidMapOperStatusread-onlycurrent
pvxPCVRTXlateOperStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.8PvxCVidMapOperStatusread-onlycurrent
pvxPCVRTRowStatus
OBJECT-TYPE
This object is used to create or delete a new row in the pvxPbCVidRegistrationTable.
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.100RowStatusread-createcurrent
pvxEthServiceTable
OBJECT-TYPE
This table is used to configure services on all the switches in the chassis.
1.3.6.1.4.1.18070.2.2.1.14.2.18not-accessiblecurrent
pvxEthServiceEntry
OBJECT-TYPE
The conceptual row object of the Ethernet Service table. Note the pvxEthSrvcName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a service named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1not-accessiblecurrent
pvxEthSrvcSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.1INTEGER (1..11)not-accessiblecurrent
pvxEthSrvcName
OBJECT-TYPE
The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.2DisplayString (SIZE(1..32))not-accessiblecurrent
pvxEthSrvcType
OBJECT-TYPE
This object represents the particular service type. This object must be specifyed during row creation and cannot be changed.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.3INTEGER {epline(1), evpline(2), eplan(3), evplan(4), erps(5), igmp(6), managementVLAN(7), eptree(8), evptree(9)}read-createcurrent
pvxEthSrvcState
OBJECT-TYPE
Is this service administratively enabled or disabled?
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.4INTEGER {enable(1), disable(2), testing(3)}read-createcurrent
pvxEthSrvcOperState
OBJECT-TYPE
The current operational state of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.5OperStatusread-onlycurrent
pvxEthSrvcTransportType
OBJECT-TYPE
For future compatibily; describes the transport mechanism for this service. For the current release we only support providerBridge IEEE802.1ad transport.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.6INTEGER {providerBridge(1), none(2)}read-onlycurrent
pvxEthSrvcSVLAN
OBJECT-TYPE
If no value is specified in the row create request, the value defaults to the current reserved SVLAN value.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.7PvxVlanIdread-createcurrent
pvxEthSrvcSpanTreeInstance
OBJECT-TYPE
The spanning tree instance for this service. Default is 0
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.8INTEGER (0..16)read-createcurrent
pvxEthSrvcMaxUNIs
OBJECT-TYPE
The maximum number of UNIs that can be associated with this Service. This value is derived from the ServiceType
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.9Integer32read-onlycurrent
pvxEthSrvcNumUNIs
OBJECT-TYPE
The number of UNIs currently associated with the Service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.10Integer32read-onlycurrent
pvxEthSrvcPointedness
OBJECT-TYPE
Is this a point-to-point or multipoint service
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.11INTEGER {pointToPoint(1), multiPoint(2), internal(3), ring(4)}read-onlycurrent
pvxEthSrvcFrameSize
OBJECT-TYPE
The maximum size of a frame transported on this service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.12INTEGER (1518..9600)read-createcurrent
pvxEthSrvcCVidXlate
OBJECT-TYPE
Do we translate the C-VID on this service? Can only be true if all UNIs have a single C-VID mapped to this service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.13TruthValueread-createcurrent
pvxEthSrvcMECciInterval
OBJECT-TYPE
Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are sent every 10 milliseconds. interval100ms(3) CCMs are sent every 100 milliseconds. interval1s(4) CCMs are sent every 1 second. interval10s(5) CCMs are sent every 10 seconds. interval1min(6) CCMs are sent every minute. interval10min(7) CCMs are sent every 10 minutes. Default value is set to interval1s by the system.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.14INTEGER {intervalInvalid(1), interval300Hz(2), interval10ms(3), interval100ms(4), interval1s(5), interval10s(6), interval1min(7), interval10min(8)}read-createcurrent
pvxEthSrvcMECciEnable
OBJECT-TYPE
If set to true, the MEP will generate CCM messages. Default is set to false by the system.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.15TruthValueread-createcurrent
pvxEthSrvcMEName
OBJECT-TYPE
Name of the EVC Maintanence Entity. Maximum length is 6 characters.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.16DisplayString (SIZE(1..6))read-createcurrent
pvxEthSrvcMaxNNIs
OBJECT-TYPE
The maximum number of NNIs that can be associated with this Service. This value is derived from the ServiceType
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.17Integer32read-onlycurrent
pvxEthSrvcNumNNIs
OBJECT-TYPE
The number of NNIs currently associated with the Service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.18Integer32read-onlycurrent
pvxEthSrvcLockNNIs
OBJECT-TYPE
If true, the switch will not let any dynamic VLAN protocols, such as GVRP, add NNIs to the Service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.19TruthValueread-createcurrent
pvxEthSrvcExceedMaxUNI
OBJECT-TYPE
This attribute is used to indicate the error condition that the maximum number of NUIs has exceeded for EPLINE or EVPLINE.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.20TruthValueread-onlycurrent
pvxEthSrvcRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.100RowStatusread-createcurrent
pvxServiceUNITable
OBJECT-TYPE
This table binds a UNI to a service and describes the configuration of the UNI-service combination.
1.3.6.1.4.1.18070.2.2.1.14.2.19not-accessiblecurrent
pvxServiceUNIEntry
OBJECT-TYPE
The conceptual row object of the Service UNI table. Note the pvxSrvcUNISrvcName index is a variable length OCTET STRING object. When encoded as part of the Service UNI index, it includes the string length as part of the instance. For example, a service named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1not-accessiblecurrent
pvxSrvcUNISwitchId
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.1INTEGER (1..11)not-accessiblecurrent
pvxSrvcUNIShelfId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxSrvcUNISlotId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxSrvcUNIPortTypeId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.4PvxPortTypenot-accessiblecurrent
pvxSrvcUNIPortId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.5Integer32not-accessiblecurrent
pvxSrvcUNISrvcName
OBJECT-TYPE
The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.6DisplayString (SIZE(1..32))not-accessiblecurrent
pvxSrvcUNINumCVids
OBJECT-TYPE
The number of C-VIDs associated with this service on this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.7Integer32read-onlycurrent
pvxSrvcUNIIngressBW
OBJECT-TYPE
The name of the profile thay specifies the ingress bandwidth for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.8DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcUNIIngressBWperCos
OBJECT-TYPE
The name of the profile thay specifies the ingress bandwidth per COS Id for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.9DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcUNIEgressBW
OBJECT-TYPE
The name of the profile thay specifies the egress bandwidth for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.10DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcUNIEgressBWperCos
OBJECT-TYPE
The name of the profile thay specifies the egress bandwidth per COS Id for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.11DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcUNIUserDefinedMepId
OBJECT-TYPE
If the value is zero, then the user has not set a MEP ID for the Service UNI and one will be autogenerated by the system. If the user wishes to manually configure a MEP ID it must be in the range of 1 - 8191, inclusive.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.12INTEGER (0..8191)read-createcurrent
pvxSrvcUNIForwarding
OBJECT-TYPE
Forwarding specification applies only to E-Tree services. It is an indication of whether a UNI is a Leaf port(etree-leaf) or a Root port(normal). The default value for all UNIs is etree-leaf. For other eservices except E-tree, it's only shown as normal and not configurable.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.13INTEGER {normal(1), etree-leaf(2)}read-createcurrent
pvxSrvcUNIServiceMap
OBJECT-TYPE
The name of the profile that specifies the service map filters for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.14DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcUNIFilterSequence
OBJECT-TYPE
A numerical value used to order service map filter evaluation on a UNI. Lower values are evaluated before higher values
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.15INTEGER (1..100)read-createcurrent
pvxSrvcUNIEFPSDEnabled
OBJECT-TYPE
Indicates if Ethernet Fault Propagation Shut Down (EFPSD) feature is enabled on this service UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.16TruthValueread-createcurrent
pvxSrvcUNIEFPSDLocalEFPSDState
OBJECT-TYPE
For service UNIs with EFPSD enabled, indicates if EFPSD is currently engaged on the local UNI. If EFPSD is engaged, the transmitter on the UNI is off.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.17TruthValueread-onlycurrent
pvxSrvcUNISlaMeasurementProfile
OBJECT-TYPE
The name of the profile that specifies the SLA mesaurement thresholds for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.18DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcUNIRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.100RowStatusread-createcurrent
pvxSvidXlateTable
OBJECT-TYPE
This table defines all User Network Interfaces on all switches.
1.3.6.1.4.1.18070.2.2.1.14.2.20not-accessiblecurrent
pvxSvidXlateEntry
OBJECT-TYPE
The conceptual row object of the SvidXlate Table
1.3.6.1.4.1.18070.2.2.1.14.2.20.1not-accessiblecurrent
pvxSvidXlateSwitchId
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.1INTEGER (1..11)not-accessiblecurrent
pvxSvidXlateShelfId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxSvidXlateSlotId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxSvidXlatePortTypeId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.4PvxPortTypenot-accessiblecurrent
pvxSvidXlatePortId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.5Integer32not-accessiblecurrent
pvxSvidXlateInternalSVid
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.6PvxVlanIdnot-accessiblecurrent
pvxSvidXlateExternalSVid
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.7PvxVlanIdread-writecurrent
pvxEcfmService
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.14.2.21
pvxMepListTable
OBJECT-TYPE
List of MEPIDs (in any bridge) that belong to the same ME.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1not-accessiblecurrent
pvxMepListEntry
OBJECT-TYPE
The known MEPs table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1not-accessiblecurrent
pvxMepListSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.1INTEGER (1..11)not-accessiblecurrent
pvxMepListESrvcVlanId
OBJECT-TYPE
The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.2INTEGER (1..4094)not-accessiblecurrent
pvxMepListIdentifier
OBJECT-TYPE
A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.3INTEGER (1..8191)not-accessiblecurrent
pvxMepLocalRemoteFlag
OBJECT-TYPE
A flag indicating whether the MEP is local or remote. Default is set to remoteMEP by the system.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.4INTEGER {localMEP(1), remoteMEP(2)}read-onlycurrent
pvxMepSequenceId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.5INTEGER (1..8191)read-onlycurrent
pvxMepListRowStatus
OBJECT-TYPE
The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.100RowStatusread-createcurrent
pvxEcfmMepTable
OBJECT-TYPE
The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2not-accessiblecurrent
pvxEcfmMepEntry
OBJECT-TYPE
The MEP table entry
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1not-accessiblecurrent
pvxEcfmMepSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.1INTEGER (1..11)not-accessiblecurrent
pvxEcfmMepShelfId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxEcfmMepSlotId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxEcfmMepPortTypeId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.4PvxPortTypenot-accessiblecurrent
pvxEcfmMepPortId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.5Integer32not-accessiblecurrent
pvxEcfmMepESrvcName
OBJECT-TYPE
The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.6DisplayString (SIZE(1..32))not-accessiblecurrent
pvxEcfmMepIdentifier
OBJECT-TYPE
A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.7INTEGER (1..8191)read-writecurrent
pvxEcfmMepDirection
OBJECT-TYPE
MEP direction. Default is set to up by the system.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.8INTEGER {up(1), down(2)}read-writecurrent
pvxEcfmMepActive
OBJECT-TYPE
A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that it is to cease functioning.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.9TruthValueread-writecurrent
pvxEcfmMepAutoGenerateFlag
OBJECT-TYPE
A Boolean indicating whether the MEP ID is auto-generated by the system. FALSE indicates the user configured the MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.10TruthValueread-writecurrent
pvxEcfmMepMacAddress
OBJECT-TYPE
MAC address of the MEP.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.11MacAddressread-onlycurrent
pvxEcfmMepFlushRMepDb
OBJECT-TYPE
A Boolean indicating whether the remote MEP needs to flush its MEP list or not True indicates that the remote MEP needs to flush and rebuild its MEP lists.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.12TruthValueread-writecurrent
pvxEcfmMepOutOfService
OBJECT-TYPE
Adminstrative service that is being or to be performed. True indicates that the operation needs to be performed out-of-service. Otherwise, the operation needs to be performed in-service..
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.13TruthValueread-writecurrent
pvxEcfmMepY1731DefectConditions
OBJECT-TYPE
A vector of Boolean indicates the defect conditions.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.14PvxY1731MepDefectsread-onlycurrent
pvxEcfmMepDefects
OBJECT-TYPE
A vector of Boolean indicates the defect conditions.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.15PvxEcfmMepDefectsread-onlycurrent
pvxEcfmMepCcmSequenceErr
OBJECT-TYPE
The total number of out-of-sequence CCMs received from all remote MEPs.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.16Unsigned32read-onlycurrent
pvxEcfmMepSentCcms
OBJECT-TYPE
Total number of Continuity Check messages transmitted.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.17Unsigned32read-onlycurrent
pvxEcfmMepTransmitLtmStatus
OBJECT-TYPE
A Enumerated value set to 'transmit' to initiate LTM transmission. Set to 'ready' or 'notReady' by the MEP Linktrace Initiator State Machine.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.18PvxEcfmTransmitStatusread-writecurrent
pvxEcfmMepTransmitLtmTargetMepId
OBJECT-TYPE
Target MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.19INTEGER (1..8191)read-writecurrent
pvxEcfmMepTransmitLtmTtl
OBJECT-TYPE
The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that handles the LTM. The value received in the LTM is returned in the LTR. If 0 on input, the LTM is not transmitted to the next hop.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.20Unsigned32 (0..255)read-writecurrent
pvxEcfmMepTransmitLtmResultOK
OBJECT-TYPE
Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.21TruthValueread-onlycurrent
pvxEcfmMepTransmitLtmSeqNumber
OBJECT-TYPE
The LTM Transaction Identifier of the LTM sent. The value returned is undefined if pvxEcfmMepTransmitLtmResultOK is false.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.22Unsigned32read-onlycurrent
pvxEcfmMepTransmitLbmStatus
OBJECT-TYPE
A Enumerated value set to 'transmit'to initiate LBM transmission. Set to 'ready' or 'notReady' by the MEP Loopback Initiator State Machine.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.23PvxEcfmTransmitStatusread-writecurrent
pvxEcfmMepTransmitLbmDestMepId
OBJECT-TYPE
Target MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.24INTEGER (1..8191)read-writecurrent
pvxEcfmMepTransmitLbmCount
OBJECT-TYPE
Identifies the number of LBMs transmitted
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.25Unsigned32read-writecurrent
pvxEcfmMepTransmitLbmResultOK
OBJECT-TYPE
Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.26TruthValueread-onlycurrent
pvxEcfmMepY1731LbmCurrentTransId
OBJECT-TYPE
Identifies the current LBM Transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.27Unsigned32 (1..4294967295)read-onlycurrent
pvxEcfmMepLbrIn
OBJECT-TYPE
Total number of valid, in-order Loopback Replies received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.28Unsigned32read-onlycurrent
pvxEcfmMepLbrInOutOfOrder
OBJECT-TYPE
The total number of valid, out-of-order Loopback Replies received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.29Unsigned32read-onlycurrent
pvxEcfmMepLbrBadMsdu
OBJECT-TYPE
The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.30Unsigned32read-onlycurrent
pvxEcfmMepLbrOut
OBJECT-TYPE
Total number of Loopback Replies transmitted.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.31Unsigned32read-onlycurrent
pvxEcfmMepUnexpLtrIn
OBJECT-TYPE
The total number of unexpected LTRs received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.32Unsigned32read-onlycurrent
pvxEcfmMepErrCcmRMepId
OBJECT-TYPE
Mep Id of the CCM which caused the Error CCM Defect.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.33Unsigned32read-onlycurrent
pvxEcfmMepXconnRMepId
OBJECT-TYPE
Mep Id of the CCM which caused the Xconn CCM Defect
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.34Unsigned32read-onlycurrent
pvxEcfmMepDbTable
OBJECT-TYPE
The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3not-accessiblecurrent
pvxEcfmMepDbEntry
OBJECT-TYPE
The MEP Database table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1not-accessiblecurrent
pvxEcfmMepDbSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.1INTEGER (1..11)not-accessiblecurrent
pvxEcfmMepDbVlanId
OBJECT-TYPE
The vlan ID of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.2INTEGER (1..4094)not-accessiblecurrent
pvxEcfmMepDbLocalMepId
OBJECT-TYPE
A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.3INTEGER (1..8191)not-accessiblecurrent
pvxEcfmMepDbRemoteMepId
OBJECT-TYPE
A 13 bits value of remote MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.4INTEGER (1..8191)not-accessiblecurrent
pvxEcfmMepDbRMepState
OBJECT-TYPE
The operational state of the remote MEP IFF State machines.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.5PvxEcfmRemoteMepStateread-onlycurrent
pvxEcfmMepDbMacAddress
OBJECT-TYPE
The MAC address of the remote MEP.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.6MacAddressread-onlycurrent
pvxEcfmMepDbRMepSwitchName
OBJECT-TYPE
The name of the remote switch. It is set by the system as PVX-x where 'x' is the switch nubmer.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.7DisplayString (SIZE(1..32))read-onlycurrent
pvxEcfmMepDbRMepPortInfo
OBJECT-TYPE
The port information of the remote port. It is set by the system as a string of shelfNumber/slotNumber/portType/portNumber.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.8DisplayString (SIZE(1..32))read-onlycurrent
pvxEcfmMepDbRMepRDI
OBJECT-TYPE
State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.9TruthValueread-onlycurrent
pvxEcfmMepDbRMepCcmDefect
OBJECT-TYPE
A Boolean indicating that no CCM has been received from the remote MEP for at least (3.25*CCM time (CCMInterval)) seconds
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.10TruthValueread-onlycurrent
pvxEcfmMepDbRMepPortStatusDefect
OBJECT-TYPE
True if a Port Status Defect is reported by a remote MEP
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.11TruthValueread-onlycurrent
pvxEcfmMepDbRMepIntfStatusDefect
OBJECT-TYPE
True if an Interface Status Defect is reported by a remote MEP
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.12TruthValueread-onlycurrent
pvxEcfmMipTable
OBJECT-TYPE
The Maintenance Intermediate Point (MIP) table. Each row in the table represents a different MIP. A MIP consists two MIP Half Functions (MHFs) on a single Bridge Port, an Up MHF and a Down MHF.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4not-accessiblecurrent
pvxEcfmMipEntry
OBJECT-TYPE
The MIP table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1not-accessiblecurrent
pvxEcfmMipSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.1INTEGER (1..11)not-accessiblecurrent
pvxEcfmMipShelfId
OBJECT-TYPE
The shelf number.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxEcfmMipSlotId
OBJECT-TYPE
The slot number.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxEcfmMipPortTypeId
OBJECT-TYPE
The port type.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.4PvxPortTypenot-accessiblecurrent
pvxEcfmMipPortId
OBJECT-TYPE
The port number
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.5INTEGER (1..24)not-accessiblecurrent
pvxEcfmMipMegLevel
OBJECT-TYPE
The MEG level.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.6INTEGER (1..7)not-accessiblecurrent
pvxEcfmMipESrvcVlanId
OBJECT-TYPE
The vlan ID of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.7INTEGER (1..4094)not-accessiblecurrent
pvxEcfmMipESrvcName
OBJECT-TYPE
The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.8DisplayString (SIZE(1..32))read-onlycurrent
pvxEcfmMipActiveState
OBJECT-TYPE
A Boolean indicating the administrative state of the MIP. True indicates that the MIP is to function normally, and false that it is to cease functioning.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.9TruthValueread-createcurrent
pvxEcfmMipRowStatus
OBJECT-TYPE
The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.100RowStatusread-createcurrent
pvxY1731LbStatsTable
OBJECT-TYPE
This table extends the MEP table and contains output of loopback or ping transaction. Output includes number of replies recieved, time taken for a reply to come.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6not-accessiblecurrent
pvxY1731LbStatsEntry
OBJECT-TYPE
The Loopback Statistics table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1not-accessiblecurrent
pvxY1731LbStatsSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.1INTEGER (1..11)not-accessiblecurrent
pvxY1731LbStatsESrvcName
OBJECT-TYPE
The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.2DisplayString (SIZE(1..32))not-accessiblecurrent
pvxY1731LbStatsIdentifier
OBJECT-TYPE
A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.3INTEGER (1..8191)not-accessiblecurrent
pvxY1731LbmTransId
OBJECT-TYPE
Transaction Identifier identifies a loopback or ping (LBM)transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.4Unsigned32 (1..4294967295)not-accessiblecurrent
pvxY1731LbStatsLbmOut
OBJECT-TYPE
Number of LBMs sent in a loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.5Unsigned32read-onlycurrent
pvxY1731LbStatsLbrIn
OBJECT-TYPE
Number of replies (LBR) received in a loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.6Unsigned32read-onlycurrent
pvxY1731LbStatsLbrTimeAverage
OBJECT-TYPE
Average time taken to receive the replies (LBR) for the current loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.7TimeIntervalread-onlycurrent
pvxY1731LbStatsLbrTimeMin
OBJECT-TYPE
Minimum time taken to receive the replies (LBR) for the current loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.8TimeIntervalread-onlycurrent
pvxY1731LbStatsLbrTimeMax
OBJECT-TYPE
Maximum time taken to receive the replies (LBR) for the current loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.9TimeIntervalread-onlycurrent
pvxY1731LbStatsTotalResponders
OBJECT-TYPE
Total Number of Responders which have sent the reply (LBR) for the initiated LBM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.10Unsigned32read-onlycurrent
pvxY1731LbStatsAvgLbrsPerResponder
OBJECT-TYPE
Average Number of LBR(s) received per Responder.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.11Unsigned32read-onlycurrent
pvxEcfmLtrTable
OBJECT-TYPE
This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7not-accessiblecurrent
pvxEcfmLtrEntry
OBJECT-TYPE
The Linktrace Reply table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1not-accessiblecurrent
pvxEcfmLtrSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.1INTEGER (1..11)not-accessiblecurrent
pvxEcfmLtrVlanId
OBJECT-TYPE
The s-vlan of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.2INTEGER (1..4094)not-accessiblecurrent
pvxEcfmLtrMepIdentifier
OBJECT-TYPE
A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.3INTEGER (1..8191)not-accessiblecurrent
pvxEcfmLtrSeqNumber
OBJECT-TYPE
Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.4Unsigned32 (0..4294967295)not-accessiblecurrent
pvxEcfmLtrReceiveOrder
OBJECT-TYPE
An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. pvxEcfmLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.5Unsigned32 (1..4294967295)not-accessiblecurrent
pvxEcfmLtrTtl
OBJECT-TYPE
TTL field value for a returned LTR.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.6Unsigned32 (0..255)read-onlycurrent
pvxEcfmLtrForwarded
OBJECT-TYPE
Indicates if a LTM was forwarded by the responding MP.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.7TruthValueread-onlycurrent
pvxEcfmLtrTerminalMep
OBJECT-TYPE
A boolean value stating whether the forwarded LTM reached a MEP enclosing its ME.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.8TruthValueread-onlycurrent
pvxEcfmLtrRelayAction
OBJECT-TYPE
Value returned in the Relay Action field.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.9PvxEcfmRelayActionFieldValueread-onlycurrent
pvxEcfmLtrSwitchName
OBJECT-TYPE
The switch name of the MEP. It is set by the system as PVX-x where 'x' is the switch nubmer.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.10DisplayString (SIZE(1..32))read-onlycurrent
pvxEcfmLtrIngressAction
OBJECT-TYPE
The value returned in the Ingress Action Field of the LTM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.11PvxEcfmIngressActionFieldValueread-onlycurrent
pvxEcfmLtrIngressMac
OBJECT-TYPE
MAC address returned in the ingress MAC address field.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.12MacAddressread-onlycurrent
pvxEcfmLtrIngressPortInfo
OBJECT-TYPE
The port information of the ingress port. It is set by the system as a string of shelfNumber/slotNumber/portType/portNumber.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.13DisplayString (SIZE(1..32))read-onlycurrent
pvxEcfmLtrEgressAction
OBJECT-TYPE
The value returned in the Egress Action Field of the LTM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.14PvxEcfmEgressActionFieldValueread-onlycurrent
pvxEcfmLtrEgressMac
OBJECT-TYPE
MAC address returned in the egress MAC address field.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.15MacAddressread-onlycurrent
pvxEcfmLtrEgressPortInfo
OBJECT-TYPE
The port information of the egress port. It is set by the system as a string of shelfNumber/slotNumber/portType/portNumber.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.16DisplayString (SIZE(1..32))read-onlycurrent
pvxSLAThroughputTestTable
OBJECT-TYPE
This table sets the parameters to setup SLA throughput test and captures the results.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8not-accessiblecurrent
pvxSLAThroughputTestEntry
OBJECT-TYPE
The throughput test table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1not-accessiblecurrent
pvxSLAThroughputTestSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.1INTEGER (1..11)not-accessiblecurrent
pvxSLAThroughputTestShelfIdx
OBJECT-TYPE
The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxSLAThroughputTestSlotIdx
OBJECT-TYPE
The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxSLAThroughputTestPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.4PvxPortTypenot-accessiblecurrent
pvxSLAThroughputTestPortIdx
OBJECT-TYPE
The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.5INTEGER (0..64)not-accessiblecurrent
pvxSLAThroughputTestESName
OBJECT-TYPE
The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.6DisplayStringnot-accessiblecurrent
pvxSLAThroughputTestRMepId
OBJECT-TYPE
Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.7INTEGER (1..8191)not-accessiblecurrent
pvxSLAThroughputTestRole
OBJECT-TYPE
Set the test role, initiator or responder.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.8SlaTestRoleread-createcurrent
pvxSLAThroughputTestInitiatorCmdState
OBJECT-TYPE
Set the initiator command state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.9CommandStateTyperead-createcurrent
pvxSLAThroughputTestResponderOpState
OBJECT-TYPE
Test responder operational state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.10INTEGER {idle(1), testInProgress(2), rmepNotReady(3)}read-onlycurrent
pvxSLAThroughputTestFrameSize1
OBJECT-TYPE
Frame size number 1.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.11INTEGER (0..9600)read-createcurrent
pvxSLAThroughputTestFrameSize2
OBJECT-TYPE
Frame size number 2.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.12INTEGER (0..9600)read-createcurrent
pvxSLAThroughputTestFrameSize3
OBJECT-TYPE
Frame size number 3.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.13INTEGER (0..9600)read-createcurrent
pvxSLAThroughputTestFrameSize4
OBJECT-TYPE
Frame size number 4.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.14INTEGER (0..9600)read-createcurrent
pvxSLAThroughputTestFrameSize5
OBJECT-TYPE
Frame size number 5.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.15INTEGER (0..9600)read-createcurrent
pvxSLAThroughputTestFrameSize6
OBJECT-TYPE
Frame size number 6.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.16INTEGER (0..9600)read-createcurrent
pvxSLAThroughputTestSrvcPolicyName
OBJECT-TYPE
Service policy profile name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.17DisplayStringread-createcurrent
pvxSLAThroughputTestClassMapName
OBJECT-TYPE
Class map profile name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.18DisplayStringread-createcurrent
pvxSLAThroughputTestBwProfileName
OBJECT-TYPE
Bandwidth profile name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.19DisplayStringread-createcurrent
pvxSLAThroughputTestSVlanPriority
OBJECT-TYPE
SLA Throughput test S-Vlan priority.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.20INTEGER (0..7)read-createcurrent
pvxSLAThroughputTestCirRateTestResult
OBJECT-TYPE
Test result, pass or fail. Pass means 100% CIR has been met.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.21CirTestResultread-onlycurrent
pvxSLAThroughputTestFrameSize1FarEndThroughput
OBJECT-TYPE
Frame Size 1 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.22Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize1NearEndThroughput
OBJECT-TYPE
Frame Size 1 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.23Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize2FarEndThroughput
OBJECT-TYPE
Frame Size 2 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.24Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize2NearEndThroughput
OBJECT-TYPE
Frame Size 2 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.25Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize3FarEndThroughput
OBJECT-TYPE
Frame Size 3 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.26Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize3NearEndThroughput
OBJECT-TYPE
Frame Size 3 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.27Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize4FarEndThroughput
OBJECT-TYPE
Frame Size 4 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.28Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize4NearEndThroughput
OBJECT-TYPE
Frame Size 4 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.29Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize5FarEndThroughput
OBJECT-TYPE
Frame Size 5 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.30Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize5NearEndThroughput
OBJECT-TYPE
Frame Size 5 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.31Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize6FarEndThroughput
OBJECT-TYPE
Frame Size 6 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.32Unsigned32read-onlycurrent
pvxSLAThroughputTestFrameSize6NearEndThroughput
OBJECT-TYPE
Frame Size 6 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.33Unsigned32read-onlycurrent
pvxSLAThroughputTestRowStatus
OBJECT-TYPE
The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.100RowStatusread-createcurrent
pvxSLAMsmtInitiatorDBTable
OBJECT-TYPE
This table sets the SLA measurement Initiator test command state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9not-accessiblecurrent
pvxSLAMsmtInitiatorDBEntry
OBJECT-TYPE
The SLA measurement initiator table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1not-accessiblecurrent
pvxSLAMsmtInitiatorDBSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.1INTEGER (1..11)not-accessiblecurrent
pvxSLAMsmtInitiatorDBShelfIdx
OBJECT-TYPE
The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxSLAMsmtInitiatorDBSlotIdx
OBJECT-TYPE
The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxSLAMsmtInitiatorDBPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.4PvxPortTypenot-accessiblecurrent
pvxSLAMsmtInitiatorDBPortIdx
OBJECT-TYPE
The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.5INTEGER (0..64)not-accessiblecurrent
pvxSLAMsmtInitiatorDBESName
OBJECT-TYPE
The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.6DisplayStringnot-accessiblecurrent
pvxSLAMsmtInitiatorDBRMepId
OBJECT-TYPE
Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.7INTEGER (1..8191)not-accessiblecurrent
pvxSLAMsmtInitiatorDBCmdState
OBJECT-TYPE
Set the PM frame loss test command state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.8PmTestCmdStateread-createcurrent
pvxSLAMsmtInitiatorDBDelayMsmtSVlanPriority
OBJECT-TYPE
Set the PM frame delay test s-vlan priority.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.9INTEGER (0..7)read-createcurrent
pvxSLAMsmtInitiatorDBRowStatus
OBJECT-TYPE
The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.100RowStatusread-createcurrent
pvxSLAMsmtResponderDBTable
OBJECT-TYPE
This table keeps a record of responder MEP IDs.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10not-accessiblecurrent
pvxSLAMsmtResponderDBEntry
OBJECT-TYPE
The SLA measurement responder table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1not-accessiblecurrent
pvxSLAMsmtResponderDBSwitchIdx
OBJECT-TYPE
The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.1INTEGER (1..11)not-accessiblecurrent
pvxSLAMsmtResponderDBShelfIdx
OBJECT-TYPE
The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxSLAMsmtResponderDBSlotIdx
OBJECT-TYPE
The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxSLAMsmtResponderDBPortTypeIdx
OBJECT-TYPE
The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.4PvxPortTypenot-accessiblecurrent
pvxSLAMsmtResponderDBPortIdx
OBJECT-TYPE
The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.5INTEGER (0..64)not-accessiblecurrent
pvxSLAMsmtResponderDBESName
OBJECT-TYPE
The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.6DisplayStringnot-accessiblecurrent
pvxSLAMsmtResponderDBRMepId
OBJECT-TYPE
Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.7INTEGER (1..8191)not-accessiblecurrent
pvxSLAMsmtResponderDBRowStatus
OBJECT-TYPE
The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.100RowStatusread-createcurrent
pvxMgmtVLANTable
OBJECT-TYPE
This table describes the Management VLAN service for the switch.
1.3.6.1.4.1.18070.2.2.1.14.2.22not-accessiblecurrent
pvxMgmtVLANEntry
OBJECT-TYPE
A row in the Management VLAN Table. Note that in Provider Bridge mode, a row in this table is auto-created by adding an entry in the pvxEthServiceTable. You cannot create the row directly.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1not-accessiblecurrent
pvxMgmtVLANSwitchIdx
OBJECT-TYPE
This object represents the switch on which this Mgmt VLAN runs.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.1INTEGER (1..11)not-accessiblecurrent
pvxMgmtVLANSrvcName
OBJECT-TYPE
This is the name of the Mgmt VLAN service. A corresponding entry with this name is in the pvxEthServicesTable
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.2DisplayStringnot-accessiblecurrent
pvxMgmtVLANBWProfileName
OBJECT-TYPE
The name of the bandwidth profile that applies to the management VLAN. Does not apply in provider bridge mode.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.3DisplayStringread-createcurrent
pvxMgmtVLANCVLANId
OBJECT-TYPE
The Customer VLAN ID with which packets will be tagged when sent on the Mgmt VLAN. If 0, no CVLAN tagging will occur.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.4INTEGER (0..4095)read-createcurrent
pvxMgmtVLANAddressType
OBJECT-TYPE
The type of addresses (v4/v6) used in this row of this MIB. Currently only ipv4 is allowed in this table.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.5InetAddressTyperead-createcurrent
pvxMgmtVLANIpAddress
OBJECT-TYPE
The IP Address associated with this interface.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.6InetAddressread-createcurrent
pvxMgmtVLANNetMask
OBJECT-TYPE
The sub-net mask associated with this interface.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.7InetAddressread-createcurrent
pvxMgmtVLANRowStatus
OBJECT-TYPE
This object is used to create a new row in the MgmtVLAN table.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.100RowStatusread-createcurrent
pvxServiceNNITable
OBJECT-TYPE
This table binds a NNI to a service and describes the configuration of the NNI-service combination.
1.3.6.1.4.1.18070.2.2.1.14.2.23not-accessiblecurrent
pvxServiceNNIEntry
OBJECT-TYPE
The conceptual row object of the Service NNI table. Note the pvxSrvcNNISrvcName index is a variable length OCTET STRING object. When encoded as part of the Service NNI index, it includes the string length as part of the instance. For example, a service named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1not-accessiblecurrent
pvxSrvcNNISwitchId
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.1INTEGER (1..11)not-accessiblecurrent
pvxSrvcNNIShelfId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxSrvcNNISlotId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxSrvcNNIPortTypeId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.4PvxPortTypenot-accessiblecurrent
pvxSrvcNNIPortId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.5Integer32not-accessiblecurrent
pvxSrvcNNISrvcName
OBJECT-TYPE
The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.6DisplayString (SIZE(1..32))not-accessiblecurrent
pvxSrvcNNIIngressBW
OBJECT-TYPE
The name of the profile thay specifies the ingress bandwidth for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.8DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcNNIIngressBWperCos
OBJECT-TYPE
The name of the profile thay specifies the ingress bandwidth per COS Id for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.9DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcNNIEgressBW
OBJECT-TYPE
The name of the profile thay specifies the egress bandwidth for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.10DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcNNIEgressBWperCos
OBJECT-TYPE
The name of the profile thay specifies the egress bandwidth per COS Id for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.11DisplayString (SIZE(0..32))read-createcurrent
pvxSrvcNNIRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.100RowStatusread-createcurrent
pvxERPSServiceNNITable
OBJECT-TYPE
This table provides configuration for an ERPS NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.24not-accessiblecurrent
pvxERPSServiceNNIEntry
OBJECT-TYPE
The conceptual row object of the ERPS Service NNI table.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1not-accessiblecurrent
pvxERPSSrvcNNISwitchId
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.1INTEGER (1..11)not-accessiblecurrent
pvxERPSSrvcNNIShelfId
OBJECT-TYPE
This object represents the particular shelf id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
pvxERPSSrvcNNISlotId
OBJECT-TYPE
This object represents the particular slot id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.3INTEGER (0 | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19)not-accessiblecurrent
pvxERPSSrvcNNIPortTypeId
OBJECT-TYPE
This object represents the particular port type.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.4PvxPortTypenot-accessiblecurrent
pvxERPSSrvcNNIPortId
OBJECT-TYPE
This object represents the particular port id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.5Integer32not-accessiblecurrent
pvxERPSSrvcNNIProtectionSwitch
OBJECT-TYPE
This object identifies the port that will be blocked by enforcing forced or manual switching. Enabling this port configures pvxERSPSrvcProtectionSwitchMode to operate on this port. The pvxERPSSrvcProtectionSwitchMode must be set to 'normal' in order to enable or disable pvxERPSSrvcNNIProtectionSwitch on this port.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.7INTEGER {enable(1), disable(2)}read-writecurrent
pvxERPSSrvcNNIRingPortStatus
OBJECT-TYPE
This object indicates the port's current status updated by the ERPS control process of this ring.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.8INTEGER {blocked(1), unblocked(2)}read-onlycurrent
pvxERPSSrvcNNISrvcName
OBJECT-TYPE
The name of the ERPS service this port is part of.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.9DisplayString (SIZE(1..32))read-onlycurrent
pvxERPSSrvcNNIRingPortId
OBJECT-TYPE
The designation of this port w.r.t. the ERPS ring.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.10INTEGER {ringPort1(1), ringPort2(2)}read-onlycurrent
pvxERPSSrvcNNIMEName
OBJECT-TYPE
The Maintanence Entity Name for the CCMs for this ERPS NNI. Maximum length is 6 characters.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.11DisplayString (SIZE(1..6))read-writecurrent
pvxERPSSrvcNNIRemoteMepId
OBJECT-TYPE
The MEP Id of the remote end-point of the NNI. 0 indicates that the value should be auto-discovered.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.12INTEGER (0..8191)read-writecurrent
pvxERPSSrvcNNIECFMInfo
OBJECT-TYPE
The provisioned information about the ECMF entities in the ring.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.13DisplayString (SIZE(1..127))read-onlycurrent
pvxERPSSrvcNNILocalMepId
OBJECT-TYPE
The MEP Id of the local end-point of the NNI. 0 indicates that the value should be auto-discovered.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.14INTEGER (0..8191)read-writecurrent
pvxERPSSrvcNNINeighborPort
OBJECT-TYPE
This object identifies the RPL Neighbor port of the ring. When a\ port is configured as a RPL Neighbor port, that node becomes RPL Neighbor for that ring. [Reference : Section 10.1 of ITU-T G.8032 Y.1344 (03/2010)] Value '2' indicates that this ring port is not a RPL Neighbor port. Both the RPL owner and RPL Neighbor node cannot be enabled at the same Ethernet Ring Node. Administrator has to ensure that, only one node in a ring is configured as RPL Neighbor, and the node is adjacent to the RPL .
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.15INTEGER {enable(1), disable(2)}read-writecurrent
pvxERPSSrvcNNINextNeighborPort
OBJECT-TYPE
This object identifies the RPL Next Neighbor port of the ring. When a port is configured as a RPL Next Neighbor port, that node becomes RPL Next Neighbor for that ring. [Reference : Section VIII.4 of ITU-T G.8032 Y.1344 (03/2010)] Value '2' indicates that this ring port is not a RPL Next Neighbor port. Both the RPL owner and RPL Next Neighbor node cannot be enabled at the same Ethernet Ring Node. Administrator has to ensure that, only nodes in a ring which are adjacent to the RPL owner or RPL Neighbor node are configured as RPL Next Neighbor Nodess.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.16INTEGER {enable(1), disable(2)}read-writecurrent
pvxERPSSrvcNNIFlushRemoteMEP
OBJECT-TYPE
A Boolean indicating whether the remote MEP needs to flush its MEP list or not True indicates that the remote MEP needs to flush and rebuild its MEP lists.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.17TruthValueread-writecurrent
pvxERPSServiceTable
OBJECT-TYPE
This table is used to configure ERPS service on a particular switch in the chassis.
1.3.6.1.4.1.18070.2.2.1.14.2.25not-accessiblecurrent
pvxERPSServiceEntry
OBJECT-TYPE
The conceptual row object of the ERPS Service.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1not-accessiblecurrent
pvxERPSSrvcSwitchIdx
OBJECT-TYPE
This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.1INTEGER (1..11)not-accessiblecurrent
pvxERPSSrvcName
OBJECT-TYPE
The name of the ERPS service.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.2DisplayString (SIZE(1..32))not-accessiblecurrent
pvxERPSSrvcRevertMode
OBJECT-TYPE
This object identifies whether the ring is operating in revertive or nonRevertive manner. In revertive mode of operation, once the failed link recovers, the data path will be switched back from protection path to working path. In nonRevertive mode of operation, once the failed link recovers, the recovered link port will remain blocked state and the data still remains with the protection path.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.3INTEGER {revertive(1), non-revertive(2)}read-writecurrent
pvxERPSSrvcProtectionSwitchMode
OBJECT-TYPE
Before configuring this object with 'forceSwitch' or 'manualSwitch', pvxERPSSrvcNNIProtectionSwitch MUST be enabled on one of the NNI ports. When forcedSwitch is enabled on a ring, irrespective of the status (Failed or not failed) of the NNI port, the port will be blocked. If a link failure is present in the ring, then setting the value as 'manualSwitch' will not be allowed. Failure of the link in the ring will clear the manual switch condition. Force Switch is higher priority than the manual switch, as such forceSwitch will overwrite the manual switch configuration. Similarly manualSwitch will not be allowed, when forceSwitch is enabled. 'normalSwitch' command will clear the Manual/Force switch
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.4INTEGER {normalSwitch(1), forceSwitch(2), manualSwitch(3), clear(4)}read-writecurrent
pvxERPSSrvcHoldTimer
OBJECT-TYPE
This object is used to configure the period for the hold timer of this ring. Hold-Off timer will be started when a new defect (SF) is received on this ring. This defect will not be give as local SF to ERP control process until hold timer expires. When the hold-off timer expires, and if a local defect still exists it will be given as local SF to the ERP control process of this ring.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.5Unsigned32 (0..100)read-writecurrent
pvxERPSSrvcWaitToRestoreTimer
OBJECT-TYPE
This object is used to configure the period for the Wait to restore timer. This object is applicable only if this ring is operating in the revertive mode of operation. In the revertive mode of operation, if this object is configured with a value of '0', then the traffic is switched back to the working entity from the protection entity immediately upon recovery from failure of the working entity. Value can be set to 10 seconds or any value between 5 minutes (300) and 15 minutes (900) that is an even one minute interval.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.6Unsigned32 (10 | 300 | 360 | 420 | 480 | 540 | 600 | 660 | 720 | 780 | 840 | 900)read-writecurrent
pvxERPSSrvcGuardTimer
OBJECT-TYPE
This object is used to configure the period for the guard timer of this ring. This timer is required to prevent reception of outdated R-APS messages. Guard timer will be started on reception of local clear SF event. R-APS messages (except R-APS event messages) received on a ring when guard timer is running, will be discarded.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.7Unsigned32 (0..200)read-writecurrent
pvxERPSSrvcPeriodicTimer
OBJECT-TYPE
This object is used to configure the periodic timer. Periodic timer is used to configure the transmission interval of R-APS PDUs. Periodic timer is not valid for the first 3 R-APS PDU transmission, that will be send on any change of R-APS information.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.8Unsigned32 (5..10)read-writecurrent
pvxERPSSrvcPropagateTC
OBJECT-TYPE
This object is used to Enable/Disable the Propagation of TC in the associated rings, whenever the flush FDB is triggered for this sub-ring. This configuration is applicable only in the interconnecting nodes of the sub-ring
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.9INTEGER {enable(1), disable(2)}read-writecurrent
pvxERPSSrvcNodeType
OBJECT-TYPE
This object identifies the node state of this ring node. If one of the NNI is configured as the RPL, then this ring node becomes 'rplOwner', otherwise the node remains as 'nonRplOwner'.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.10INTEGER {rplOwner(1), nonRplOwner(2)}read-onlycurrent
pvxERPSSrvcRingMonitoring
OBJECT-TYPE
This attribute is the configurations related to the link monitoring entities. The fault monitoring could be using the Y.1731 mechanism or local detection mechanisms.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.11INTEGER {cfm(1), local(2)}read-onlycurrent
pvxERPSSrvcRingProperty
OBJECT-TYPE
This attributes indicates the ring property of the service. The 'normal' ring propery indicates that this node supports the regular ring properties for the service. The 'inter-connect' ring property indicates that this nodes supports the 'sub-ring' connectivity for this service
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.12INTEGER {normal(1), inter-connect(2)}read-writecurrent
pvxERPSSrvcRingSemState
OBJECT-TYPE
This object gives the node state as per the G.8032 state event machine. During fault-free operation the state would be in 'idle' state. Any fault condition on the ring network would move this attribute into the protection state. If a manual switch is issued on any node in the ring the operation state of the ring would be �manualswitch�state. If a force switch is issued on any node in the ring the operation state of the ring would be �forcedswitch� �Pending�state occurs when a ring transition has occurred and the node is waiting for a timer to expire.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.13INTEGER {disable(1), idle(2), protection(3), manualswitch(4), forcedswitch(5), pending(6)}read-onlycurrent
pvxERPSSrvcRingNodeStatus
OBJECT-TYPE
A 32 bit mask giving the current status of the ring by specifying the events/status currently present: Bit 1 - Signal-failure on Ring Port 1 Bit 2 - Signal-failure on Ring Port 2 Bit 3 - Remote-signal-failure received on Ring Port 1 Bit 4 - Remote-signal-failure received on Ring Port 2 Bit 5 - Rpl-Blocked Bit 6 - Wait-to-restore-timer-running Bit 7 - Hold-timer-running Bit 8 - Guard-timer-running Value 1 of the bit signifies the presence of the event associated with that bit and values zero signifies absence of that event
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.14Integer32read-onlycurrent
pvxERPSSrvcNumRingPorts
OBJECT-TYPE
This attribute indicates the number of ring ports attached to this ERPS service
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.15INTEGER (0..2)read-onlycurrent
pvxERPSSrvcSVLAN
OBJECT-TYPE
VlanID associated with the Eservice
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.16PvxVlanIdread-onlycurrent
pvxERPSSrvcWaitToBlockTimer
OBJECT-TYPE
This object is used to configure the period for Wait to Block timer. This object is effective, only when force switch or manual switch is configured in the ring and when clear command is issued to recover the ring from force switch or manual switch. The WTB timer is defined to be 5 seconds longer than the guard timer. The WTB timer has a period from 0 to 24 hour, configurable in units of 1 millisecond. For example, to configure WTB timer as 1 second configure the value as 1000.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.18Unsigned32 (0..864000000)read-writecurrent
pvxERPSSrvcCompatibleVersion
OBJECT-TYPE
This is used to configure the compatible version number of the node in the ring. The ITU-T G.8032/Y.1344 (03//2010) standard states that the default compatible version is version2. The default value is version2 (2). The version number can be modified only when the row status of the ring entry is in not in service.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.19INTEGER {v1(1), v2(2)}read-writecurrent
pvxERPSSrvcMultipleFailure
OBJECT-TYPE
This object is configured in interconnection node of the sub-ring to support the feature 'Minimizing segmentation in interconnected rings' as per Appendix X of ITU-T G.8032/Y.1344 (03/2010) standard. Configured value of vxERPSSrvcMultipleFailure is used in Block Indication Logic Procedure as per Section X.3.2 in Appendix X of ITU-T G.8032/Y.1344 (03/2010) standard. Interconnected rings as described below : a) If Loss of connectivity between the interconnection nodes is detected and if the object pvxERPSSrvcMultipleFailure is configured as primary then Local MS command is applied on the subring port else loss of connectivity between the interconnection nodes is ignored. b) Similarly when loss of connectivity between the interconnection nodes is recovered and if the object pvxERPSSrvcInterconnectedNode is primary then Local MS command on the subring port is cleared else recovery of connectivity between the interconnection nodes is ignored. This object is effective only when ring node is interconnection node. The default value is disabled (1). This object is applicable only when the compatible version is 2.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.20INTEGER {disabled(1), primary(2)}read-writecurrent
pvxERPSSrvcSubRingWithoutVC
OBJECT-TYPE
This configuration helps to configure the sub-ring to run with or without an RAPS Virtual Channel. When this object is set to 'false', the sub-ring is configured to run with a R-APS Virtual Channel and both the traffic channel and the R-APS channel are blocked, when the ring port is set to blocked state. When this object is set to 'true',the sub-ring is configured to run without a R-APS Virtual Channel and the traffic channel is blocked but the R-APS channel is not blocked, when the ring port is set to blocked state [Reference : Section 10.1.14 of ITU-T G.8032 Y.1344 (03/2010)]. Administrator has to ensure that, this object is configured to true only in the nodes of a sub-ring. This object should be set to the same value (true/false) on all the nodes of the sub-ring. This object is applicable only when the compatible version is 2. This object can be changed, only when the rowstatus for this ring is not active.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.21TruthValueread-writecurrent
pvxERPSSrvcDownMegLevel
OBJECT-TYPE
This object identifies the MEG level that will be used on CCM messages sent for DOWN MEPs for this ERPS eservice. This object can only be modified if ERPS service is disabled
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.22INTEGER (0..6)read-writecurrent
pvxERPSSrvcUpMegLevel
OBJECT-TYPE
This object identifies the MEG level that will be used on CCM messages sent for UP MEPs for this ERPS eservice. This object can only be modified if ERPS service is disabled
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.23INTEGER (0..6)read-writecurrent
pvxBridgeProfiles
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.14.3
pvxBWProfileTable
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1not-accessiblecurrent
pvxBWProfileEntry
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1not-accessiblecurrent
pvxBWPIdx
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.1Integer32not-accessiblecurrent
pvxBWPCir
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.2Integer32read-createcurrent
pvxBWPCbs
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.3Integer32read-createcurrent
pvxBWPEir
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.4Integer32read-createcurrent
pvxBWPEbs
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.5Integer32read-createcurrent
pvxBWPCoSQueue
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.6Integer32read-createcurrent
pvxBWPRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.100RowStatusread-createcurrent
pvxCoSProfileTable
OBJECT-TYPE
This table is used to configure the Class of service on a port of a particular member of a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.3.2not-accessiblecurrent
pvxCoSProfileEntry
OBJECT-TYPE
The conceptual row object of the Cos table.
1.3.6.1.4.1.18070.2.2.1.14.3.2.1not-accessiblecurrent
pvxCPIdx
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.1Integer32not-accessiblecurrent
pvxCPMaxBandwidth
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.2Integer32read-createcurrent
pvxCPMinBandwidth
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.3Integer32read-createcurrent
pvxCPWeight
OBJECT-TYPE
The weight of the queue associated with a CoS for WRR(+SP) and DRR(+SP) queuing algorithms
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.4Integer32read-createcurrent
pvxCPQueueAlgo
OBJECT-TYPE
This object represents the queuing algorithm configured for a particular cos on a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.5INTEGER {sp(1), rr(2), wrr(3), drr(4), wrrsp(5), drrsp(6)}read-createcurrent
pvxCPRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.100RowStatusread-createcurrent
pvxCtrlFrmProfileTable
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.14.3.3
pvxFlowMeterProfileTable
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4not-accessiblecurrent
pvxFlowMeterProfileEntry
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4.1not-accessiblecurrent
pvxFMPIdx
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.1Integer32not-accessiblecurrent
pvxFMPBWProfileId
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.2Integer32read-createcurrent
pvxFMPColorAware
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.3TruthValueread-createcurrent
pvxFMPMeterType
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.4INTEGER {flow(1), srTCM(2), drTCM(3)}read-createcurrent
pvxFMPStatsEnabled
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.5ProtocolActionTyperead-createcurrent
pvxFMPRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.100RowStatusread-createcurrent
pvxTunnMacAddrProfileTable
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.14.3.5
pvxSchedulerProfileTable
OBJECT-TYPE
This is the scheduler profile table.
1.3.6.1.4.1.18070.2.2.1.14.3.6not-accessiblecurrent
pvxSchedulerProfileEntry
OBJECT-TYPE
The conceptual row object of the Scheduler Profile Table Note the pvxSchedProfName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1not-accessiblecurrent
pvxSchedProfName
OBJECT-TYPE
The scheduler profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
pvxSchedProfAlgorithm
OBJECT-TYPE
The scheduler algorithm. The default value is sp. Once the algorithm is set, changes to this value is not allowed.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.2INTEGER {sp(1), rr(2), wrr(3), drr(4), sp-wrr(5), sp-drr(6)}read-createcurrent
pvxSchedProfWeightQ0
OBJECT-TYPE
The weight value for queue 0. The default value is 1. However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.3Integer32 (0..255)read-createcurrent
pvxSchedProfWeightQ1
OBJECT-TYPE
The weight value for queue 1. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.4Integer32 (0..255)read-createcurrent
pvxSchedProfWeightQ2
OBJECT-TYPE
The weight value for queue 2. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.5Integer32 (0..255)read-createcurrent
pvxSchedProfWeightQ3
OBJECT-TYPE
The weight value for queue 3. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.6Integer32 (0..255)read-createcurrent
pvxSchedProfWeightQ4
OBJECT-TYPE
The weight value for queue 4. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.7Integer32 (0..255)read-createcurrent
pvxSchedProfWeightQ5
OBJECT-TYPE
The weight value for queue 5. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.8Integer32 (0..255)read-createcurrent
pvxSchedProfWeightQ6
OBJECT-TYPE
The weight value for queue 6. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.9Integer32 (0..255)read-createcurrent
pvxSchedProfWeightQ7
OBJECT-TYPE
The weight value for queue 7. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.10Integer32 (0..255)read-createcurrent
pvxSchedProfMinBwQ0
OBJECT-TYPE
The minmum bandwidth for Queue 0. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.11Integer32read-createcurrent
pvxSchedProfMaxBwQ0
OBJECT-TYPE
The maximum bandwidth for Queue 0. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.12Integer32read-createcurrent
pvxSchedProfMinBwQ1
OBJECT-TYPE
The minmum bandwidth for Queue 1. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.13Integer32read-createcurrent
pvxSchedProfMaxBwQ1
OBJECT-TYPE
The maximum bandwidth for Queue 1. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.14Integer32read-createcurrent
pvxSchedProfMinBwQ2
OBJECT-TYPE
The minmum bandwidth for Queue 2. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.15Integer32read-createcurrent
pvxSchedProfMaxBwQ2
OBJECT-TYPE
The maximum bandwidth for Queue 2. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.16Integer32read-createcurrent
pvxSchedProfMinBwQ3
OBJECT-TYPE
The minmum bandwidth for Queue 3. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.17Integer32read-createcurrent
pvxSchedProfMaxBwQ3
OBJECT-TYPE
The maximum bandwidth for Queue 3. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.18Integer32read-createcurrent
pvxSchedProfMinBwQ4
OBJECT-TYPE
The minmum bandwidth for Queue 4. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.19Integer32read-createcurrent
pvxSchedProfMaxBwQ4
OBJECT-TYPE
The maximum bandwidth for Queue 4. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.20Integer32read-createcurrent
pvxSchedProfMinBwQ5
OBJECT-TYPE
The minmum bandwidth for Queue 5. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.21Integer32read-createcurrent
pvxSchedProfMaxBwQ5
OBJECT-TYPE
The maximum bandwidth for Queue 5. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.22Integer32read-createcurrent
pvxSchedProfMinBwQ6
OBJECT-TYPE
The minmum bandwidth for Queue 6. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.23Integer32read-createcurrent
pvxSchedProfMaxBwQ6
OBJECT-TYPE
The maximum bandwidth for Queue 6. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.24Integer32read-createcurrent
pvxSchedProfMinBwQ7
OBJECT-TYPE
The minmum bandwidth for Queue 7. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.25Integer32read-createcurrent
pvxSchedProfMaxBwQ7
OBJECT-TYPE
The maximum bandwidth for Queue 7. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.26Integer32read-createcurrent
pvxSchedProfMTUQuanta
OBJECT-TYPE
The attribute is only used by drr, or sp_drr scheduler mode. Default is 2Kbyte.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.27INTEGER {byte2k(1), byte16k(2)}read-createcurrent
pvxSchedProfRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.100RowStatusread-createcurrent
pvxPriorityTCMapTable
OBJECT-TYPE
A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge.
1.3.6.1.4.1.18070.2.2.1.14.3.7not-accessiblecurrent
pvxPriorityTCMapEntry
OBJECT-TYPE
The conceptual row object of the Priority Traffic Class Map Profile Table. Note the pvxPriorityTCMapName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1not-accessiblecurrent
pvxPriorityTCMapName
OBJECT-TYPE
The scheduler profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
pvxPriority7TrafficClass
OBJECT-TYPE
The traffic class for priority 7. Default is 7.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.2Integer32 (0..7)read-createcurrent
pvxPriority6TrafficClass
OBJECT-TYPE
The traffic class for priority 6. Default is 6.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.3Integer32 (0..7)read-createcurrent
pvxPriority5TrafficClass
OBJECT-TYPE
The traffic class for priority 5. Default is 5.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.4Integer32 (0..7)read-createcurrent
pvxPriority4TrafficClass
OBJECT-TYPE
The traffic class for priority 4. Default is 4.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.5Integer32 (0..7)read-createcurrent
pvxPriority3TrafficClass
OBJECT-TYPE
The traffic class for priority 3. Default is 3.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.6Integer32 (0..7)read-createcurrent
pvxPriority2TrafficClass
OBJECT-TYPE
The traffic class for priority 2. Default is 2.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.7Integer32 (0..7)read-createcurrent
pvxPriority1TrafficClass
OBJECT-TYPE
The traffic class for priority 1. Default is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.8Integer32 (0..7)read-createcurrent
pvxPriority0TrafficClass
OBJECT-TYPE
The traffic class for priority 0. Default is 1.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.9Integer32 (0..7)read-createcurrent
pvxPriorityTCMapRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.100RowStatusread-createcurrent
pvxPCPEncDecProfileTable
OBJECT-TYPE
This table contains information about Priority Code Point Enable and Decoding for a Port of a provider bridge.
1.3.6.1.4.1.18070.2.2.1.14.3.8not-accessiblecurrent
pvxPCPEncDecProfEntry
OBJECT-TYPE
The conceptual row object of the PCP Encoding Decoding Profile Table Note the pvxPCPEncDecProfileName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1not-accessiblecurrent
pvxPCPEncDecProfileName
OBJECT-TYPE
The scheduler profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
pvxPCPEncDecSelectRow
OBJECT-TYPE
The attribute is used to select one of the four default profiles: 8P0D, 7P1D, 6P2D, or 5P3D. Default value is 8P0D.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.2INTEGER {row-8P0D(1), row-7P1D(2), row-6P2D(3), row-5P3D(4)}read-createcurrent
pvxPCPEncPriority7
OBJECT-TYPE
The encoding value for this priority. Default is 7.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.3Integer32 (0..7)read-createcurrent
pvxPCPEncPriority7DE
OBJECT-TYPE
The encoding value for this priority. Default is 7.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.4Integer32 (0..7)read-createcurrent
pvxPCPEncPriority6
OBJECT-TYPE
The encoding value for this priority. Default is 6.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.5Integer32 (0..7)read-createcurrent
pvxPCPEncPriority6DE
OBJECT-TYPE
The encoding value for this priority. Default is 6.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.6Integer32 (0..7)read-createcurrent
pvxPCPEncPriority5
OBJECT-TYPE
The encoding value for this priority. Default is 5.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.7Integer32 (0..7)read-createcurrent
pvxPCPEncPriority5DE
OBJECT-TYPE
The encoding value for this priority. Default is 5.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.8Integer32 (0..7)read-createcurrent
pvxPCPEncPriority4
OBJECT-TYPE
The encoding value for this priority. Default is 4.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.9Integer32 (0..7)read-createcurrent
pvxPCPEncPriority4DE
OBJECT-TYPE
The encoding value for this priority. Default is 4.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.10Integer32 (0..7)read-createcurrent
pvxPCPEncPriority3
OBJECT-TYPE
The encoding value for this priority. Default is 3.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.11Integer32 (0..7)read-createcurrent
pvxPCPEncPriority3DE
OBJECT-TYPE
The encoding value for this priority. Default is 3.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.12Integer32 (0..7)read-createcurrent
pvxPCPEncPriority2
OBJECT-TYPE
The encoding value for this priority. Default is 2.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.13Integer32 (0..7)read-createcurrent
pvxPCPEncPriority2DE
OBJECT-TYPE
The encoding value for this priority. Default is 2.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.14Integer32 (0..7)read-createcurrent
pvxPCPEncPriority1
OBJECT-TYPE
The encoding value for this priority. Default is 1.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.15Integer32 (0..7)read-createcurrent
pvxPCPEncPriority1DE
OBJECT-TYPE
The encoding value for this priority. Default is 1.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.16Integer32 (0..7)read-createcurrent
pvxPCPEncPriority0
OBJECT-TYPE
The encoding value for this priority. Default is prioirty 0.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.17Integer32 (0..7)read-createcurrent
pvxPCPEncPriority0DE
OBJECT-TYPE
The encoding value for this priority. Default is prioirty 0.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.18Integer32 (0..7)read-createcurrent
pvxPCPDecPriority7
OBJECT-TYPE
The decoding value for this priority. Default is prioirty7.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.19PvxPCPDecodingListread-createcurrent
pvxPCPDecPriority6
OBJECT-TYPE
The decoding value for this priority. Default is prioirty6.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.20PvxPCPDecodingListread-createcurrent
pvxPCPDecPriority5
OBJECT-TYPE
The decoding value for this priority. Default is prioirty5.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.21PvxPCPDecodingListread-createcurrent
pvxPCPDecPriority4
OBJECT-TYPE
The decoding value for this priority. Default is prioirty4.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.22PvxPCPDecodingListread-createcurrent
pvxPCPDecPriority3
OBJECT-TYPE
The decoding value for this priority. Default is prioirty3.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.23PvxPCPDecodingListread-createcurrent
pvxPCPDecPriority2
OBJECT-TYPE
The decoding value for this priority. Default is prioirty2.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.24PvxPCPDecodingListread-createcurrent
pvxPCPDecPriority1
OBJECT-TYPE
The decoding value for this priority. Default is prioirty1.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.25PvxPCPDecodingListread-createcurrent
pvxPCPDecPriority0
OBJECT-TYPE
The decoding value for this priority. Default is prioirty0.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.26PvxPCPDecodingListread-createcurrent
pvxPCPEncDecRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.100RowStatusread-createcurrent
pvxDscpPHBProfileTable
OBJECT-TYPE
This table defines internal priority settings for the DSCP definitions in the TOS byte in IPV4 header.
1.3.6.1.4.1.18070.2.2.1.14.3.9not-accessiblecurrent
pvxDscpPHBProfileEntry
OBJECT-TYPE
The conceptual row object of the DSCP PHB Profile Table Note the pvxDscpPHBProfileName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1not-accessiblecurrent
pvxDscpPHBProfileName
OBJECT-TYPE
A string for profile name.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
pvxDscpClassSelector7
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP class selector 7. Default priority is set to 7.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.2Integer32 (0..7)read-createcurrent
pvxDscpClassSelector6
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP class selector 6. Default priority is set to 6.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.3Integer32 (0..7)read-createcurrent
pvxDscpClassSelector5
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP class selector 5. Default priority is set to 5.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.4Integer32 (0..7)read-createcurrent
pvxDscpClassSelector4
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP class selector 4. Default priority is set to 4.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.5Integer32 (0..7)read-createcurrent
pvxDscpClassSelector3
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP class selector 3. Default priority is set to 3.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.6Integer32 (0..7)read-createcurrent
pvxDscpClassSelector2
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP class selector 2. Default priority is set to 2.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.7Integer32 (0..7)read-createcurrent
pvxDscpClassSelector1
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP class selector 1. Default priority is set to 0.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.8Integer32 (0..7)read-createcurrent
pvxDscpClassBestEffort
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP best effort. Default priority is set to 1.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.9Integer32 (0..7)read-createcurrent
pvxDscpAssuredFwd1y
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 1, drop preference value of 1,2, or 3. Default priority is set to 2.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.10Integer32 (0..7)read-createcurrent
pvxDscpAssuredFwd2y
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 2, drop preference value of 1,2, or 3. Default priority is set to 3.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.11Integer32 (0..7)read-createcurrent
pvxDscpAssuredFwd3y
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 3, drop preference value of 1,2, or 3. Default priority is set to 4.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.12Integer32 (0..7)read-createcurrent
pvxDscpAssuredFwd4y
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 4, drop preference value of 1,2, or 3. Default priority is set to 5.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.13Integer32 (0..7)read-createcurrent
pvxDscpExpeditedFwd
OBJECT-TYPE
This attribute assigns the internal priority value for DSCP expedited forwarding. Default priority is set to 7.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.14Integer32 (0..7)read-createcurrent
pvxDscpPHBProfileRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.100RowStatusread-createcurrent
pvxBandwidthProfileTable
OBJECT-TYPE
This table is used to configure the Class of service bandwidth paramaters.
1.3.6.1.4.1.18070.2.2.1.14.3.10not-accessiblecurrent
pvxBandwidthProfileEntry
OBJECT-TYPE
The conceptual row object of the Bandwidth Profile Table Note the pvxBandwidthProfileName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1not-accessiblecurrent
pvxBandwidthProfileName
OBJECT-TYPE
A string for profile name.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
pvxBWCnfrmActionChangeDscp
OBJECT-TYPE
This field configures the DSCP value for profile conformance action. Default is -1, means do not use this field.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.2Integer32 (-1..63)read-createcurrent
pvxBWCnfrmActionChangeTOSFrmPri
OBJECT-TYPE
This field configures the TOS frame priority for profile conformance action. 1: change, 2: do not change, 3: not defined. Default is 3, means do not use this field.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.3INTEGER {change(1), doNotChange(2), notUsed(3)}read-createcurrent
pvxBWExceedActionChangeDscp
OBJECT-TYPE
This field configures the DSCP value for profile exceed action. Default is -1, means ignore this action.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.8Integer32 (-1..63)read-createcurrent
pvxBWMeterColorAware
OBJECT-TYPE
This field indicates whether color-aware or color-blind proprety is employed. Default is color-blind.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.13PvxQoSColorModeread-createcurrent
pvxBWMeterMode
OBJECT-TYPE
This field configures meter enging schemes. The value can be single-rate Three-Color Marker, or two-rate Three-Color Marker, or not used. Default is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.14INTEGER {srTCM(1), trTCM(2), notUsed(3)}read-createcurrent
pvxBWMeterCir
OBJECT-TYPE
This field defines Committed Information Rate, in kbps.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.15Integer32 (0..10000000)read-createcurrent
pvxBWMeterCbs
OBJECT-TYPE
This field defines Committed Burst Size, in kilobytes.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.16Integer32 (4..2048)read-createcurrent
pvxBWMeterEir
OBJECT-TYPE
This field defines Excess Information Rate, in kbps.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.17Integer32 (0..32000000)read-createcurrent
pvxBWMeterEbs
OBJECT-TYPE
This field defines Excess Burst Size, in kilobytes.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.18Integer32 (0..2048)read-createcurrent
pvxBWSetInternalPriority
OBJECT-TYPE
This field defines internal priority for policy actions. Default is set to -1 by the switch, which indicates that this fields is ignored.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.19Integer32 (-1..7)read-createcurrent
pvxBWExceedActionSetDEI
OBJECT-TYPE
This field configures frame's DEI bit for profile exceed action. 1: set, 2: do not set, 3: not defined. Default is 1, means set DEI bit for frames exceed rate.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.20INTEGER {set(1), doNotSet(2), notUsed(3)}read-createcurrent
pvxBandwidthProfileRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.100RowStatusread-createcurrent
pvxClassMapProfileTable
OBJECT-TYPE
The table configures filter actions for each Class of Service.
1.3.6.1.4.1.18070.2.2.1.14.3.11not-accessiblecurrent
pvxClassMapProfileEntry
OBJECT-TYPE
The conceptual row object of the Class MAP Profile Table. Note the pvxClassMapProfileName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1not-accessiblecurrent
pvxClassMapProfileName
OBJECT-TYPE
A string for profile name.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
pvxClassMapType
OBJECT-TYPE
This field indicates whether this profile is for ingress Class of Service or egress Class of Service.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.2INTEGER {ingress-Per-Cos(1), egress-Per-Cos(2), service-Map(3)}read-createcurrent
pvxClassMapMatchType
OBJECT-TYPE
This field defines filter action. It can be match-all, or match any. Default is matchAll.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.3INTEGER {match-all(1), match-any(2)}read-createcurrent
pvxClassMapCVlanFilter
OBJECT-TYPE
This field defines the Customer vlan filter for this class of servcie. Default is -1, means ignore this field. If pvxClassMapCVlanEndFilter is unused, this value represents a single vlan to match. If pvxClassMapCVlanEndFilter contains a filter value, then this value is the beginning of a range of vlans to match. When a range of vlans is specified, the beginning vlan value MUST be greater than end value.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.4Integer32 (-1..4095)read-createcurrent
pvxClassMapSVlanFilter
OBJECT-TYPE
This field defines the Service VLAN filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.5Integer32 (-1..4095)read-onlydeprecated
pvxClassMapCVlanPriFilter
OBJECT-TYPE
This field defines the Customer vlan priority filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.6Integer32 (-1..7)read-createcurrent
pvxClassMapSVlanPriFilter
OBJECT-TYPE
This field defines the Servicre vlan priority filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.7Integer32 (-1..7)read-createcurrent
pvxClassMapSrcIpFilter
OBJECT-TYPE
This field defines the Source IP filter for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.8IpAddressread-createcurrent
pvxClassMapSrcIpNetMaskFilter
OBJECT-TYPE
This field defines the Network Mask filter of source IP for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.9IpAddressread-createcurrent
pvxClassMapDstIpFilter
OBJECT-TYPE
This field defines the Destination IP filter for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.10IpAddressread-createcurrent
pvxClassMapDstIpNetMaskFilter
OBJECT-TYPE
This field defines the Network Mask filter of destination IP for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.11IpAddressread-createcurrent
pvxClassMapIpProtocolFilter
OBJECT-TYPE
This field defines the IP protocol filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.12Integer32 (-1..255)read-createcurrent
pvxClassMapDscpFilter
OBJECT-TYPE
This field defines the DSCP filter for this class of servcie. Default is -1, means the field is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.13Integer32 (-1..63)read-createcurrent
pvxClassMapL4SrcPortFilter
OBJECT-TYPE
This field defines the Layer 4 source port filter for this class of servcie. Default is -1, means the field is not used. If pvxClassMapL4SrcPortEndFilter is unused, this value represents a single port to match. If pvxClassMapL4SrcPortEndFilter contains a filter value, then this value is the beginning of a range of ports to match. When a range of ports is specified, the beginning port value MUST be a power of 2.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.14Integer32 (-1..65535)read-createcurrent
pvxClassMapL4DstPortFilter
OBJECT-TYPE
This field defines the Layer 4 destinatin port filter for this class of servcie. Default is -1, means the field is not used. If pvxClassMapL4DstPortEndFilter is unused, this value represents a single port to match. If pvxClassMapL4SrcPortEndFilter contains a filter value, then this value is the beginning of a range of ports to match. When a range of ports is specified, the beginning port value MUST be a power of 2.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.15Integer32 (-1..65535)read-createcurrent
pvxClassMapTcpControlFilter
OBJECT-TYPE
This field defines the Tcp control filter for this class of servcie. Default is -1, means the field is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.16Integer32 (-1..63)read-createcurrent
pvxClassMapSrcMACAddrFilter
OBJECT-TYPE
This field defines the Source MAC address filter for this class of servcie. Default is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.17MacAddressread-createcurrent
pvxClassMapDstMACAddrFilter
OBJECT-TYPE
This field defines the Destination MAC address filter for this class of servcie. Default is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.18MacAddressread-createcurrent
pvxClassMapEtherTypeFilter
OBJECT-TYPE
This field defines the ethernet address type filter for this class of servcie. Default is -1, means the filter is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.19Integer32 (-1..65535)read-createcurrent
pvxClassMapSrcMACMaskFilter
OBJECT-TYPE
This field defines the source MAC address mask. Default is set to 0, which indicates the source MAC address filter is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.20Integer32 (0..48)read-createcurrent
pvxClassMapDstMACMaskFilter
OBJECT-TYPE
This field defines the destination MAC address mask. Default is set to 0, which indicates the destination MAC address filter is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.21Integer32 (0..48)read-createcurrent
pvxClassMapL4SrcPortEndFilter
OBJECT-TYPE
This field defines the Layer 4 source port filter for this class of service. Default is -1, means the field is not used. When specified this value MUST be greater than the value of pvxClassMapL4SrcPortFilter
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.22Integer32 (-1 | 3 | 7 | 15 | 31 | 63 | 127 | 255 | 511 | 1023 | 2047 | 4095 | 8191 | 16383 | 32767 | 65535)read-createcurrent
pvxClassMapL4DstPortEndFilter
OBJECT-TYPE
This field defines the Layer 4 destination port filter for this class of service. Default is -1, means the field is not used. When specified this value MUST be greater than the value of pvxClassMapL4DstPortFilter
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.23Integer32 (-1 | 3 | 7 | 15 | 31 | 63 | 127 | 255 | 511 | 1023 | 2047 | 4095 | 8191 | 16383 | 32767 | 65535)read-createcurrent
pvxClassMapCVlanEndFilter
OBJECT-TYPE
This field s used to define end point of range of C-VLANs which will be part of this class of service. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.24Integer32 (-1..4095)read-createcurrent
pvxClassMapProfileRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.100RowStatusread-createcurrent
pvxPolicyMapProfileTable
OBJECT-TYPE
Policy Map Profile Table.
1.3.6.1.4.1.18070.2.2.1.14.3.12not-accessiblecurrent
pvxPolicyMapProfileEntry
OBJECT-TYPE
This table contains Class profile identifier to policy identifier mapping. One policy identifier can be associated with multiple Class profiles. Note that both pvxPolicyMapPolicyName and pvxPolicyMapClassMapName indices are variable length OCTET STRING objects. When encoded as part of the index, it includes the string length as part of the instance. For example, a policy named 'aaa' is encoded as '3.97.97.97' (decimal). For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.12.1not-accessiblecurrent
pvxPolicyMapPolicyName
OBJECT-TYPE
The policy map profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
pvxPolicyMapClassMapName
OBJECT-TYPE
The class map profile applied to this policy.
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.2DisplayString (SIZE(1..32))not-accessiblecurrent
pvxPolicyMapBWProfileName
OBJECT-TYPE
The bandwidth profile used for this policy. For ClassMap profiles of type service-Map, this parameter MUST be an empty string. For all other ClassMap profile types, the object MUST contain the name of a valid Bandwidth Profile name.
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.3DisplayString (SIZE(0..32))read-createcurrent
pvxPolicyMapProfileRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.100RowStatusread-createcurrent
pvxControlFrameProfileTable
OBJECT-TYPE
This table is used to configure the Layer 2 control profile on a particular virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.3.13not-accessiblecurrent
pvxControlFrameProfileEntry
OBJECT-TYPE
The conceptual row object of the Control Frame profile Table. Note the pvxControlFrameProfileTable index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1not-accessiblecurrent
pvxControlFrameProfileName
OBJECT-TYPE
Control frame profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.1ProfileNameTyperead-createcurrent
pvxControlFrameProfileLacp
OBJECT-TYPE
This attributes defined the control action to LACP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.2ProtocolActionTyperead-createcurrent
pvxControlFrameProfileStp
OBJECT-TYPE
This attributes defined the control action to STP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.3ProtocolActionTyperead-createcurrent
pvxControlFrameProfileDot1x
OBJECT-TYPE
This attributes defined the control action to Dot1x protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.4ProtocolActionTyperead-createcurrent
pvxControlFrameProfileGvrp
OBJECT-TYPE
This attributes defined the control action to GVRP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.5ProtocolActionTyperead-createcurrent
pvxControlFrameProfileGmrp
OBJECT-TYPE
This attributes defined the control action to GMRP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.6ProtocolActionTyperead-createcurrent
pvxControlFrameProfileLldp
OBJECT-TYPE
This attributes defined the control action to LLDP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.7ProtocolActionTyperead-createcurrent
pvxControlFrameProfileRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.100RowStatusread-createcurrent
pvxTunnelMacAddrProfileTable
OBJECT-TYPE
This table is used to control L2 tunneling Mac addresses.
1.3.6.1.4.1.18070.2.2.1.14.3.14not-accessiblecurrent
pvxTunnelMacAddrProfileEntry
OBJECT-TYPE
The conceptual row object of the Tunnel MAC Address Profile Table Note the pvxTMAPName index is a variable length OCTET STRING object. When encoded as part of the index, it includes the string length as part of the instance. For example, a profile named 'aaa' is encoded as '3.61.61.61'. For more info on encoding OCTET STRING instances in OID's, see RFC-2578, section 7.7.
1.3.6.1.4.1.18070.2.2.1.14.3.14.1not-accessiblecurrent
pvxTMAPName
OBJECT-TYPE
Tunnel MAC address profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.1ProfileNameTyperead-createcurrent
pvxTMAPDot1xTunnMacAddr
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.2MacAddressread-createcurrent
pvxTMAPLacpTunnMacAddr
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.3MacAddressread-createcurrent
pvxTMAPStpTunnMacAddr
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.4MacAddressread-createcurrent
pvxTMAPGvrpTunnMacAddr
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.5MacAddressread-createcurrent
pvxTMAPGmrpTunnMacAddr
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.6MacAddressread-createcurrent
pvxTMAPLldpTunnMacAddr
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.7MacAddressread-createcurrent
pvxTMAPRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.100RowStatusread-createcurrent
pvxSLAMeasurementProfileTable
OBJECT-TYPE
This table is used to control Ethernet service SLA measurement.
1.3.6.1.4.1.18070.2.2.1.14.3.15not-accessiblecurrent
pvxSLAMeasurementProfileEntry
OBJECT-TYPE
The conceptual row object for the SLA measurement profile.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1not-accessiblecurrent
pvxSLAMsmtProfileName
OBJECT-TYPE
SLA measurement profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.1ProfileNameTypenot-accessiblecurrent
pvxSLAMsmtThresholdFarEndLossRatio
OBJECT-TYPE
Threshold for the far end farme loss ratio. It is a percentage value multiply with one thousand.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.2FixedX1000read-createcurrent
pvxSLAMsmtThresholdNearEndLossRatio
OBJECT-TYPE
Threshold for the near end farme loss ratio. It is a percentage value multiply with one thousand.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.3FixedX1000read-createcurrent
pvxSLAMsmtThresholdDelayMaximum
OBJECT-TYPE
Two-way delay maximum in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.4Unsigned32read-createcurrent
pvxSLAMsmtThresholdDelayAverage
OBJECT-TYPE
Two-way delay average in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.5Unsigned32read-createcurrent
pvxSLAMsmtThresholdDelayVarMaximum
OBJECT-TYPE
Two-way delay variation maximum in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.6Unsigned32read-createcurrent
pvxSLAMsmtThresholdDelayVarAverage
OBJECT-TYPE
Two-way delay variation average in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.7Unsigned32read-createcurrent
pvxSLAMsmtMonitorPeriod
OBJECT-TYPE
Monitor period, 15-min or 24-hour.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.8MonitorPeriodTyperead-createcurrent
pvxSLAMsmtRowStatus
OBJECT-TYPE
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.100RowStatusread-createcurrent
mstpGlobalErrType
OBJECT-TYPE
Used within the Trap Notification PDU. It returns the following values memfail - memory allocation failure bufffail - buffer allocation failure
1.3.6.1.4.1.18070.2.2.1.14.4.1.1INTEGER {memfail(1), bufffail(2)}accessible-for-notifycurrent
mstpGeneralEvtType
OBJECT-TYPE
Used within the Trap Notification PDU. It returns the following values up - protocol up down - protocol down
1.3.6.1.4.1.18070.2.2.1.14.4.1.2INTEGER {up(1), down(2)}accessible-for-notifycurrent
mstpProtocolMigrationType
OBJECT-TYPE
Used within the Trap Notification PDU. Port protocol migration type occured in the port.
1.3.6.1.4.1.18070.2.2.1.14.4.1.3INTEGER {sendstp(1), sendrstp(2)}accessible-for-notifycurrent
mstpPacketErrType
OBJECT-TYPE
Used within the Trap Notification PDU. Type of invalid packet received in each of the port
1.3.6.1.4.1.18070.2.2.1.14.4.1.4INTEGER {protocolIdErr(1), invalidBpdu(2), configLengthErr(3), tcnLengthErr(4), rstpLengthErr(5), maxAgeErr(6), fwdDelayErr(7), helloTimeErr(8), mstpLengthErr(9)}accessible-for-notifycurrent
mstpPacketErrValue
OBJECT-TYPE
Used within the Trap Notification PDU. Packet error value corresponding to the above type.
1.3.6.1.4.1.18070.2.2.1.14.4.1.5Integer32accessible-for-notifycurrent
pvxBridgeGVRP
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.14.5
cfmRMepStateChangeEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.36
pvxVlanPortLastBpduOriginChangeEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.37
pvxVlanPortAddDynamicVlanEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.38
pvxVlanPortRemoveDynamicVlanEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.39

Notifications

NameOIDStatus
mstpProtocolGeneralEvt
NOTIFICATION-TYPE
Generated when any of the general events like protocol up or protocol down occurs.
1.3.6.1.4.1.18070.2.2.2.1.23.0.1current
mstpNewRootEvt
NOTIFICATION-TYPE
Generated whenever a new root bridge is selected in the topology.
1.3.6.1.4.1.18070.2.2.2.1.23.0.2current
mstpTopologyChangeEvt
NOTIFICATION-TYPE
Generated when topology change is detected
1.3.6.1.4.1.18070.2.2.2.1.23.0.3current
mstpProtocolMigrationEvt
NOTIFICATION-TYPE
Generated when port protocol migration happens in the port.
1.3.6.1.4.1.18070.2.2.2.1.23.0.4current
mstpInvalidPacketRcvdEvt
NOTIFICATION-TYPE
Generated when port protocol migration happens in the port.
1.3.6.1.4.1.18070.2.2.2.1.23.0.5current
mstpRegionConfigChangeEvt
NOTIFICATION-TYPE
Generated when the MST region�s configuration identifier changes.
1.3.6.1.4.1.18070.2.2.2.1.23.0.6current
mstpRoleChangeEvt
NOTIFICATION-TYPE
Generated whenever a new role is selected for the port.
1.3.6.1.4.1.18070.2.2.2.1.23.0.7current
pvxESrvcBWPrflBDWUtlzTcaEvt
NOTIFICATION-TYPE
This trap provides a threshold crossing alert when the bandwidth utilization rate of a perEVC or perCoS instance exceeds a configured threshold.
1.3.6.1.4.1.18070.2.2.2.1.26.0.1current
pvxESrvcOperStateChangeEvt
NOTIFICATION-TYPE
This trap provides an ethernet service operational state change alert.
1.3.6.1.4.1.18070.2.2.2.1.27.0.1current
pvxERPSSrvcNNIProtectionSwitchChangeEvent
NOTIFICATION-TYPE
This trap provides an ERPS service ring port state change alert.
1.3.6.1.4.1.18070.2.2.2.1.28.0.1current
pvxERPSSrvcRingSemStateChangeEvent
NOTIFICATION-TYPE
This trap provides an ERPS service sem state change alert.
1.3.6.1.4.1.18070.2.2.2.1.29.0.1current
pvxERPSSrvcConfigFailEvent
NOTIFICATION-TYPE
This trap indicates a failure occurred while programming the hardware to capture R-APS messages. The ERPS ring will not function if this trap occurs.
1.3.6.1.4.1.18070.2.2.2.1.29.0.2current
pvxERPSSrvcTimerStartEvent
NOTIFICATION-TYPE
This trap indicates a failure starting one of the ERPS timers. The ERPS ring will not function correctly after this trap occurs.
1.3.6.1.4.1.18070.2.2.2.1.29.0.3current
pvxSlaMeasurementTcaEvt
NOTIFICATION-TYPE
This trap provides a threshold crossing alert for a performance monitoring statistic for the PVX SLA measurement.
1.3.6.1.4.1.18070.2.2.2.1.30.0.1current
pvxSrvcUNIEFPSDLocalEFPSDStateChangeEvent
NOTIFICATION-TYPE
This trap provides an Local EFPSD state change alert.
1.3.6.1.4.1.18070.2.2.2.1.32.0.1current
cfmRMepStateChangeEvt
NOTIFICATION-TYPE
A cfmRMepStateChangeEvt notification is sent when a remote MEP changes its state.
1.3.6.1.4.1.18070.2.2.2.1.36.0.1deprecated
cfmRMepStateChangeV2Evt
NOTIFICATION-TYPE
A cfmRMepStateChangeEvt notification is sent when a remote MEP changes its state.
1.3.6.1.4.1.18070.2.2.2.1.36.0.2current
pvxVlanPortLastBpduOriginChangeEvt
NOTIFICATION-TYPE
A pvxVlanPortLastBpduOriginChangeEvt notification is sent when the Source MAC Address of the last GVRP message received on this port changes.
1.3.6.1.4.1.18070.2.2.2.1.37.0.1current
pvxVlanPortAddDynamicVlanEvt
NOTIFICATION-TYPE
A pvxVlanPortAddDynamicVlanEvt notification is sent when a port is added to a VLAN in a dynamic VLAN table.
1.3.6.1.4.1.18070.2.2.2.1.38.0.1current
pvxVlanPortRemoveDynamicVlanEvt
NOTIFICATION-TYPE
A pvxVlanPortRemoveDynamicVlanEvt notification is sent when a port is removed from a VLAN in a dynamic VLAN table.
1.3.6.1.4.1.18070.2.2.2.1.39.0.1current
resourceUnavailableCond
NOTIFICATION-TYPE
Generated when any of the error events like memory failure or buffer failure occurs.
1.3.6.1.4.1.18070.2.2.2.2.22.0.1current
resourceUnavailableClear
NOTIFICATION-TYPE
Generated when any of the error events like memory failure or buffer failure clears.
1.3.6.1.4.1.18070.2.2.2.2.22.0.2current
lagLinkDownCond
NOTIFICATION-TYPE
PVX LAG link down.
1.3.6.1.4.1.18070.2.2.2.2.23.0.1current
lagLinkDownClear
NOTIFICATION-TYPE
PVX LAG link down has cleared.
1.3.6.1.4.1.18070.2.2.2.2.23.0.2current
pvxERPSSrvcVersionMismatchCond
NOTIFICATION-TYPE
This trap indicates a misconfiguration in the ERPS ring. This node is configured for one version of ERPS and is receiving packets from a node configured to run at a different version
1.3.6.1.4.1.18070.2.2.2.2.29.0.1current
pvxERPSSrvcVersionMismatchClear
NOTIFICATION-TYPE
This trap indicates a misconfiguration in the ERPS ring is cleared
1.3.6.1.4.1.18070.2.2.2.2.29.0.2current
pvxERPSSrvcFOPProvisionMismatchCond
NOTIFICATION-TYPE
This trap indicates a misconfiguration in the ERPS ring. The RPL Owner has received a R-APS (NR,RB) packet from another node that believes it is the RPL Owner.
1.3.6.1.4.1.18070.2.2.2.2.29.0.3current
pvxERPSSrvcFOPProvisionMismatchClear
NOTIFICATION-TYPE
This trap indicates a misconfiguration in the ERPS ring is cleared.
1.3.6.1.4.1.18070.2.2.2.2.29.0.4current
switchMemberStkPortDownCond
NOTIFICATION-TYPE
Generated when a switch member stacking port is down.
1.3.6.1.4.1.18070.2.2.2.2.30.0.1current
switchMemberStkPortDownClear
NOTIFICATION-TYPE
Generated when a switch member stacking port comes in service.
1.3.6.1.4.1.18070.2.2.2.2.30.0.2current