MIBs Depot

MWRM-UNIT-MIB

Registered at
1.3.6.1.4.1.2281.10.1.1
1.3.6.1.4.1.2281.10.1.2
1.3.6.1.4.1.2281.10.1.3
1.3.6.1.4.1.2281.10.1.4
1.3.6.1.4.1.2281.10.1.5
1.3.6.1.4.1.2281.10.1.6
1.3.6.1.4.1.2281.10.1.7
1.3.6.1.4.1.2281.10.3
1.3.6.1.4.1.2281.10.4
1.3.6.1.4.1.2281.10.10
1.3.6.1.4.1.2281.10.11
Namespace
ceraos
Source file
MWRM-UNIT-MIB
Digest
sha256:fb5c6280b893523469613595275d7d3a88e0672f7c829a02fd1754035a6075f6

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

2 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
MWRM-UNIT-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
AllowedNotAllowed
type
BerLevel
type
CardOccupancy
type
CfgOper
type
CfgUnitInfoOper
type
ClockSrc
type
CsrCertificateFTState
type
CsrFileFormat
type
DownUp
type
EnableDisable
type
EnableDisableSMI2
type
Exponent
type
FTStatus
type
FileRestoreStatus
type
FileTransferStatus
type
FtpProtocolType
type
GreenYellow
type
HalfFull
type
InputSeverity
type
Integrity
type
InventoryCardType
type
LicenseGeneric
type
LoopbackType
type
MetricImperial
type
NoYes
type
OffOn
type
OperState
type
PmTableType
type
ProgressStatus
type
QueueName
type
RadioId
type
RaduisAcceaaLevel
type
RateMbps
type
RbacAccessLevel
type
RfuId
type
Severity
type
SignalLevel
type
SlotId
type
SupportedNotsupported
type
SwCommand
type
SwCommandTimer
type
TrailIfType
type
TrailProtectedType
type
VmResetType
type

Objects

NameOIDSyntaxAccessStatus
microwave_radio
OBJECT-IDENTITY
1.3.6.1.4.1.2281
genEquip
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10
genEquipUnit
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1
genEquipUnitInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.1
genEquipLastCfgTimeStamp
OBJECT-TYPE
This parameter represents the configuration change counter. On every conf. change this counter is increased by 1.
1.3.6.1.4.1.2281.10.1.1.1INTEGERread-onlymandatory
genEquipRealTimeandDate
OBJECT-TYPE
This parameter specifies the real time and date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 (1992 -5 -26, 13:30:15 )
1.3.6.1.4.1.2281.10.1.1.2OCTET STRING (SIZE(8))read-writemandatory
genEquipPMGenTime
OBJECT-TYPE
This value indicates the generation time of the Performance Monitor file. The value is presented in time_t format.
1.3.6.1.4.1.2281.10.1.1.3INTEGERread-onlymandatory
genEquipInvGenTime
OBJECT-TYPE
This value indicates the generation time of the Inventory information file. The inventory file holds the configuration information of the unit. The value is presented in time_t format.
1.3.6.1.4.1.2281.10.1.1.4INTEGERread-onlymandatory
genEquipOperation
OBJECT-TYPE
Enables to perform HW reset to the indoor unit.
1.3.6.1.4.1.2281.10.1.1.5INTEGER {noAction(0), idcHwReset(1)}read-writemandatory
genEquipMIBVersion
OBJECT-TYPE
This value indicates MIB version.
1.3.6.1.4.1.2281.10.1.1.6DisplayStringread-onlymandatory
genEquipUnitCLLI
OBJECT-TYPE
This value represents a general purpose CLLI-like text field. The CLLI field is attached to traps generated from this NE.
1.3.6.1.4.1.2281.10.1.1.7DisplayString (SIZE(0..255))read-writemandatory
genEquipUnitMeasurementSystem
OBJECT-TYPE
This value represents the measurement system used by the system. (metric or imperal).
1.3.6.1.4.1.2281.10.1.1.8MetricImperialread-writemandatory
genEquipUnitIduTemperature
OBJECT-TYPE
This value indicates the IDU temperature, according to the measurement system chosen. (genEquipUnitMeasurementSystem)
1.3.6.1.4.1.2281.10.1.1.9INTEGERread-onlymandatory
genEquipUnitIduVoltageInput
OBJECT-TYPE
Voltages Input.
1.3.6.1.4.1.2281.10.1.1.10INTEGERread-onlymandatory
genEquipUnitInfoTime
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.1.11
genEquipUnitGMTHours
OBJECT-TYPE
This parameter represent the offset in hours from GMT.
1.3.6.1.4.1.2281.10.1.1.11.1INTEGER (-12..13)read-writemandatory
genEquipUnitGMTMins
OBJECT-TYPE
This parameter represents the offset in minutes from GMT.
1.3.6.1.4.1.2281.10.1.1.11.2INTEGER (0..59)read-writemandatory
genEquipUnitInfoNTP
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.1.11.6
genEquipUnitInfoNTPAdmin
OBJECT-TYPE
This parameter represents the NTP Admin state
1.3.6.1.4.1.2281.10.1.1.11.6.1EnableDisableread-writemandatory
genEquipUnitInfoNTPServerIP
OBJECT-TYPE
This parameter represents the IP address of the NTP Server
1.3.6.1.4.1.2281.10.1.1.11.6.2IpAddressread-writemandatory
genEquipUnitInfoNTPStatus
OBJECT-TYPE
This parameter represents the NTP Service status
1.3.6.1.4.1.2281.10.1.1.11.6.3INTEGER {down(0), up(1)}read-onlymandatory
genEquipUnitInfoNTPSync
OBJECT-TYPE
This parameter returns the IP address of the NTP server, with which the system is currently synchronized. Returned strings: (i) - the IP address of the reference NTP server, according to IPv4/v6 format. (ii) - 'LOCAL' if synchronized on local clock. (iii) - 'N/A' if not synchronized. Valid only when admin is 'disabled'.
1.3.6.1.4.1.2281.10.1.1.11.6.4DisplayStringread-onlymandatory
genEquipUnitInfoNTPPollInterval
OBJECT-TYPE
This parameter represents the NTP polling interval in minutes
1.3.6.1.4.1.2281.10.1.1.11.6.5INTEGER (64..1024)read-onlymandatory
genEquipUnitInfoNtpStatusTable
OBJECT-TYPE
This table shows the status of the NTP (Network Time Protocol).
1.3.6.1.4.1.2281.10.1.1.11.6.6not-accessiblemandatory
genEquipUnitInfoNtpStatusEntry
OBJECT-TYPE
Entry containing the data of the NTP status.
1.3.6.1.4.1.2281.10.1.1.11.6.6.1not-accessiblemandatory
genEquipUnitInfoNtpStatusIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.1.1.11.6.6.1.1INTEGERread-onlymandatory
genEquipUnitInfoNtpStatusPollInterval
OBJECT-TYPE
Indicates the time interval in minutes in which the NTP client polls the server it is locked to.
1.3.6.1.4.1.2281.10.1.1.11.6.6.1.2INTEGER (0..1024)read-onlymandatory
genEquipUnitInfoNtpStatusSyncServerIP
OBJECT-TYPE
he IPv4 address of the NTP server that the client is currently locked on.
1.3.6.1.4.1.2281.10.1.1.11.6.6.1.3IpAddressread-onlymandatory
genEquipUnitInfoNtpStatusLockState
OBJECT-TYPE
Indicates the NTP client lock status.
1.3.6.1.4.1.2281.10.1.1.11.6.6.1.4INTEGER {none(0), local(1), locked(2)}read-onlymandatory
genEquipUnitInfoNtpConfigTable
OBJECT-TYPE
This table allows the configuration of the NTP (Network Time Protocol).
1.3.6.1.4.1.2281.10.1.1.11.6.7not-accessiblemandatory
genEquipUnitInfoNtpConfigEntry
OBJECT-TYPE
Entry containing the data of the NTP configuration.
1.3.6.1.4.1.2281.10.1.1.11.6.7.1not-accessiblemandatory
genEquipUnitInfoNtpConfigIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.1.1.11.6.7.1.1INTEGERread-onlymandatory
genEquipUnitInfoNtpConfigAdmin
OBJECT-TYPE
The administrative state of the NTP (Network Time Protocol) feature.
1.3.6.1.4.1.2281.10.1.1.11.6.7.1.2EnableDisableread-writemandatory
genEquipUnitInfoNtpConfigVersion
OBJECT-TYPE
The NTP (Network Time Protocol) version that is being used.
1.3.6.1.4.1.2281.10.1.1.11.6.7.1.3INTEGER {ntpv3(1), ntpv4(2)}read-writemandatory
genEquipUnitInfoNtpConfigServerIPaddress1
OBJECT-TYPE
NTP server IPv4 address that is required in first priority.
1.3.6.1.4.1.2281.10.1.1.11.6.7.1.4IpAddressread-writemandatory
genEquipUnitInfoNtpConfigServerIPaddress2
OBJECT-TYPE
NTP server IPv4 address that is required in second priority.
1.3.6.1.4.1.2281.10.1.1.11.6.7.1.5IpAddressread-writemandatory
genEquipUnitDaylightSavingTimeStartMonth
OBJECT-TYPE
This parameter represents the start Month of the daylight saving time.
1.3.6.1.4.1.2281.10.1.1.11.7INTEGER (1..12)read-writemandatory
genEquipUnitDaylightSavingTimeStartDay
OBJECT-TYPE
This parameter represents the start Day of the daylight saving time.
1.3.6.1.4.1.2281.10.1.1.11.8INTEGER (1..31)read-writemandatory
genEquipUnitDaylightSavingTimeEndMonth
OBJECT-TYPE
This parameter represents the end month of the daylight saving time.
1.3.6.1.4.1.2281.10.1.1.11.9INTEGER (1..12)read-writemandatory
genEquipUnitDaylightSavingTimeEndDay
OBJECT-TYPE
This parameter represents the end day of the daylight saving time.
1.3.6.1.4.1.2281.10.1.1.11.10INTEGER (1..31)read-writemandatory
genEquipUnitDaylightSavingTimeOffset
OBJECT-TYPE
Daylight saving offset hours. for a value different then '0', at the starting date of the daylight saving time the time will jump forward in this value. at the end date of the daylight saving time, the time will jump backwards in this value.
1.3.6.1.4.1.2281.10.1.1.11.11INTEGER (0..23)read-writemandatory
genEquipUnitInfoTimeServicesTable
OBJECT-TYPE
This table contains the time services properties.
1.3.6.1.4.1.2281.10.1.1.11.12not-accessiblemandatory
genEquipUnitInfoTimeServicesEntry
OBJECT-TYPE
This table entry contains the time services properties.
1.3.6.1.4.1.2281.10.1.1.11.12.1not-accessiblemandatory
genEquipUnitInfoTimeServicesIndex
OBJECT-TYPE
The index of the table.
1.3.6.1.4.1.2281.10.1.1.11.12.1.1INTEGERread-onlymandatory
genEquipUnitInfoTimeServicesUtcHours
OBJECT-TYPE
The required hours offset relative to the UTC (Universal Time Coordinated).
1.3.6.1.4.1.2281.10.1.1.11.12.1.2INTEGER (-12..13)read-writemandatory
genEquipUnitInfoTimeServicesUtcMinutes
OBJECT-TYPE
The required minutes offset relative to the UTC (Universal Time Coordinated).
1.3.6.1.4.1.2281.10.1.1.11.12.1.3INTEGER (0..59)read-writemandatory
genEquipUnitInfoTimeServicesDstStartMonth
OBJECT-TYPE
The month when the DST (Daylight Saving Time) is required to start.
1.3.6.1.4.1.2281.10.1.1.11.12.1.4INTEGER (1..12)read-writemandatory
genEquipUnitInfoTimeServicesDstStartDay
OBJECT-TYPE
The day when the DST (Daylight Saving Time) is required to start.
1.3.6.1.4.1.2281.10.1.1.11.12.1.5INTEGER (1..31)read-writemandatory
genEquipUnitInfoTimeServicesDstEndMonth
OBJECT-TYPE
The month when the DST (Daylight Saving Time) is required to end.
1.3.6.1.4.1.2281.10.1.1.11.12.1.6INTEGER (1..12)read-writemandatory
genEquipUnitInfoTimeServicesDstEndDay
OBJECT-TYPE
The day when the DST (Daylight Saving Time) is required to end.
1.3.6.1.4.1.2281.10.1.1.11.12.1.7INTEGER (1..31)read-writemandatory
genEquipUnitInfoTimeServicesDstOffset
OBJECT-TYPE
The required offset for DST (Daylight Saving Time) in hours.
1.3.6.1.4.1.2281.10.1.1.11.12.1.8INTEGER (0..23)read-writemandatory
genEquipUnitInfoTimeServicesUtcDateAndTime
OBJECT-TYPE
UTC (Universal Time Coordinated) date and time.
1.3.6.1.4.1.2281.10.1.1.11.12.1.9INTEGERread-writemandatory
genEquipUnitInfoTimeServicesUtcCurrentDateAndTime
OBJECT-TYPE
The calculated current local date & time based on the local clock, UTC and DST (Daylight Saving Time) configurations.
1.3.6.1.4.1.2281.10.1.1.11.12.1.10INTEGERread-onlymandatory
genEquipUnitIduPowerSupply1AlarmAdmin
OBJECT-TYPE
This parameter is relevant only for IDU with more than one power supply units. The user can choose to disable (ignore the alarm) of one of the power supply units.
1.3.6.1.4.1.2281.10.1.1.12EnableDisableread-writemandatory
genEquipUnitIduPowerSupply2AlarmAdmin
OBJECT-TYPE
This parameter is relevant only for IDU with more than two power supply units. The user can choose to disable (ignore the alarm) of one of the power supply units.
1.3.6.1.4.1.2281.10.1.1.13EnableDisableread-writemandatory
genEquipUnitInfoNG
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.1.14
genEquipUnitName
OBJECT-TYPE
The name of the system.
1.3.6.1.4.1.2281.10.1.1.14.1DisplayStringread-writemandatory
genEquipUnitDescription
OBJECT-TYPE
A ahort description of the system.
1.3.6.1.4.1.2281.10.1.1.14.2DisplayStringread-writemandatory
genEquipUnitContactPerson
OBJECT-TYPE
Contact person.
1.3.6.1.4.1.2281.10.1.1.14.3DisplayStringread-writemandatory
genEquipUnitLocation
OBJECT-TYPE
The location of the system.
1.3.6.1.4.1.2281.10.1.1.14.4DisplayStringread-writemandatory
genEquipUnitLatitude
OBJECT-TYPE
The latitude of the system.
1.3.6.1.4.1.2281.10.1.1.14.5DisplayStringread-writemandatory
genEquipUnitLongitude
OBJECT-TYPE
The longitude of system.
1.3.6.1.4.1.2281.10.1.1.14.6DisplayStringread-writemandatory
genEquipUnitIpAddressType
OBJECT-TYPE
IP address Family.
1.3.6.1.4.1.2281.10.1.1.14.7INTEGER {ipv4(0), ipv6(1)}read-writemandatory
genEquipUnitInfoNGTdmInterfaceStandard
OBJECT-TYPE
The TDM interface standard: ETSI (Erupean) or ANSI (North American)
1.3.6.1.4.1.2281.10.1.1.14.8INTEGER {ets1(0), ansi(1)}read-writemandatory
genEquipUnitInventory
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.2
genEquipUnitIDUSerialNumber
OBJECT-TYPE
IDU Serial number.
1.3.6.1.4.1.2281.10.1.2.1DisplayStringread-onlymandatory
genEquipUnitIDUPartNumber
OBJECT-TYPE
IDU Part number.
1.3.6.1.4.1.2281.10.1.2.2DisplayStringread-onlymandatory
genEquipUnitInventoryNG
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.2.10
genEquipInventoryTable
OBJECT-TYPE
inventory common table.
1.3.6.1.4.1.2281.10.1.2.10.1not-accessiblemandatory
genEquipInventoryEntry
OBJECT-TYPE
inventory common table Entry.
1.3.6.1.4.1.2281.10.1.2.10.1.1not-accessiblemandatory
genEquipInventorySlotIndex
OBJECT-TYPE
slot index.
1.3.6.1.4.1.2281.10.1.2.10.1.1.1INTEGERread-onlymandatory
genEquipInventoryCardName
OBJECT-TYPE
Card name.
1.3.6.1.4.1.2281.10.1.2.10.1.1.2DisplayStringread-onlymandatory
genEquipInventoryCardType
OBJECT-TYPE
Card type.
1.3.6.1.4.1.2281.10.1.2.10.1.1.3InventoryCardTyperead-onlymandatory
genEquipInventoryCardSubType
OBJECT-TYPE
Card sub type.
1.3.6.1.4.1.2281.10.1.2.10.1.1.4INTEGERread-onlymandatory
genEquipInventoryPartNumber
OBJECT-TYPE
Part number.
1.3.6.1.4.1.2281.10.1.2.10.1.1.5DisplayStringread-onlymandatory
genEquipInventorySerialNumber
OBJECT-TYPE
Serial number.
1.3.6.1.4.1.2281.10.1.2.10.1.1.6DisplayStringread-onlymandatory
genEquipInventoryNumberWorkingDays
OBJECT-TYPE
Number of working days.
1.3.6.1.4.1.2281.10.1.2.10.1.1.7INTEGERread-onlymandatory
genEquipUnitLicenseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.3
genEquipUnitLicenseType
OBJECT-TYPE
The unit license type.
1.3.6.1.4.1.2281.10.1.3.1INTEGER {default(0), normal(1), demo(2)}read-onlymandatory
genEquipUnitLicenseCode
OBJECT-TYPE
The user license code that determines the NE license rights.
1.3.6.1.4.1.2281.10.1.3.2DisplayStringread-writemandatory
genEquipUnitACMLicense
OBJECT-TYPE
The ACM rights for the NE on the current license
1.3.6.1.4.1.2281.10.1.3.3AllowedNotAllowedread-onlymandatory
genEquipUnitSwitchAppLicense
OBJECT-TYPE
The switch application rights for the NE on the current license. Switch is either managed-switch or metro switch.
1.3.6.1.4.1.2281.10.1.3.4INTEGER {single-pipe(0), switch(8)}read-onlymandatory
genEquipUnitCapacityLicense
OBJECT-TYPE
The radio capacity allowed for the NE on the current license
1.3.6.1.4.1.2281.10.1.3.5INTEGER (10..510)read-onlymandatory
genEquipUnitLicenseDemoAdmin
OBJECT-TYPE
The Admin state of the demo mode.
1.3.6.1.4.1.2281.10.1.3.6EnableDisableread-writemandatory
genEquipUnitLicenseDemoTimer
OBJECT-TYPE
The Demo timer in hours
1.3.6.1.4.1.2281.10.1.3.7INTEGERread-onlymandatory
genEquipUnitLicenseSyncU
OBJECT-TYPE
This parameter indicates whether the synchronization unit license is allowed. This license allows configuring synchronization sources for clock distribution.
1.3.6.1.4.1.2281.10.1.3.8AllowedNotAllowedread-onlymandatory
genEquipUnitLicenseNetworkResiliency
OBJECT-TYPE
This parameter indicates whether the network resiliency license is allowed. This license allows configuring xSTP protocols and TDM path protection.
1.3.6.1.4.1.2281.10.1.3.9AllowedNotAllowedread-onlymandatory
genEquipUnitLicenseTDMCapacity
OBJECT-TYPE
This parameter indicates the number of TDM trails per radio allowed by the current license, if allowed. When TDM capacity license is allowed all scripts are allowed in the radio.
1.3.6.1.4.1.2281.10.1.3.10AllowedNotAllowedread-onlymandatory
genEquipUnitLicenseTDMCapacityValue
OBJECT-TYPE
This parameter indicates the number of TDM trails per radio allowed by the current license, if relevant. The TDM capacity value is not relevant if the genEquipUnitLicenseTDMCapacity is not allowed.
1.3.6.1.4.1.2281.10.1.3.11INTEGERread-onlymandatory
genEquipUnitLicensePerUsage
OBJECT-TYPE
This parameter indicates whether the per-usage license is allowed. This license allows configuring all features and causes their use to be reported to NMS. If the usage license is allowed, all other licenses are not relevant, as all the licenses are open for configuration.
1.3.6.1.4.1.2281.10.1.3.12AllowedNotAllowedread-onlymandatory
genEquipUnitLicenseAsymScripts
OBJECT-TYPE
This parameter indicates whether the asymmetrical scripts license is allowed. This license allows loading asymmetrical scripts.
1.3.6.1.4.1.2281.10.1.3.13AllowedNotAllowedread-onlymandatory
genEquipUnitLicenseDateCode
OBJECT-TYPE
This parameter indicates the generation date and time of the current installed license. Format is 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
1.3.6.1.4.1.2281.10.1.3.14INTEGERread-onlymandatory
genEquipUnitLicenseValidationNumber
OBJECT-TYPE
This parameter indicates the validation number of the current installed license. It can be used as a proof (for LMS) that the license key was installed in order to get a downgrade refund.
1.3.6.1.4.1.2281.10.1.3.15INTEGERread-onlymandatory
genEquipUnitLicenseFeatureTable
OBJECT-TYPE
This table shows for each feature what is its valid license and whether the license has been violated or not.
1.3.6.1.4.1.2281.10.1.3.16not-accessiblemandatory
genEquipUnitLicenseFeatureEntry
OBJECT-TYPE
This table entry shows for each feature what is its valid license and whether the license has been violated or not.
1.3.6.1.4.1.2281.10.1.3.16.1not-accessiblemandatory
genEquipUnitLicenseFeatureId
OBJECT-TYPE
A unique number which indicates the Id of the feature
1.3.6.1.4.1.2281.10.1.3.16.1.1INTEGERread-onlymandatory
genEquipUnitLicenseFeatureName
OBJECT-TYPE
The name of the feature.
1.3.6.1.4.1.2281.10.1.3.16.1.2DisplayStringread-onlymandatory
genEquipUnitLicenseFeatureDescription
OBJECT-TYPE
A short description of the feature.
1.3.6.1.4.1.2281.10.1.3.16.1.3DisplayStringread-onlymandatory
genEquipUnitLicenseFeatureIsUsed
OBJECT-TYPE
Indicates whether the licensed feature is actually in used or its quantity that currently is in use.
1.3.6.1.4.1.2281.10.1.3.16.1.4LicenseGenericread-onlymandatory
genEquipUnitLicenseFeatureIsAllowed
OBJECT-TYPE
Indicates whether a licensed feature is allowed.
1.3.6.1.4.1.2281.10.1.3.16.1.5LicenseGenericread-onlymandatory
genEquipUnitLicenseViolationStatus
OBJECT-TYPE
Indicates whether the actual configuration violates the feature license.
1.3.6.1.4.1.2281.10.1.3.16.1.6INTEGER {ok(0), violated(1)}read-onlymandatory
genEquipUnitLicenseCutThrough
OBJECT-TYPE
This parameter indicates whether the cut-through license is allowed. This license allows using the cut-through frames in the TM.
1.3.6.1.4.1.2281.10.1.3.20AllowedNotAllowedread-onlymandatory
genEquipUnitLicenseTdmInterfaceStandard
OBJECT-TYPE
The TDM interface standard: ETSI (European) or ANSI (North American).
1.3.6.1.4.1.2281.10.1.3.21INTEGER {ets1(0), ansi(1)}read-onlymandatory
genEquipUnitExternalAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.4
genEquipUnitAlarmInput
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.4.1
genEquipUnitAlarmInputTable
OBJECT-TYPE
External input alarm table. Using the table to manage the admin state of the external input alarm (Enable or Disable it). Set a description and severity.
1.3.6.1.4.1.2281.10.1.4.1.1not-accessiblemandatory
genEquipUnitAlarmInputEntry
OBJECT-TYPE
External input alarm table. Using the table to manage the admin state of the external input alarm (Enable or Disable it). Set a description and severity.
1.3.6.1.4.1.2281.10.1.4.1.1.1not-accessiblemandatory
genEquipUnitAlarmInputCounter
OBJECT-TYPE
External input alarm table index.
1.3.6.1.4.1.2281.10.1.4.1.1.1.1INTEGERread-onlymandatory
genEquipUnitAlarmInputAdmin
OBJECT-TYPE
The Admin state of the External input alarm table.
1.3.6.1.4.1.2281.10.1.4.1.1.1.2EnableDisableSMI2read-writemandatory
genEquipUnitAlarmInputText
OBJECT-TYPE
External input alarm description.
1.3.6.1.4.1.2281.10.1.4.1.1.1.3DisplayString (SIZE(0..99))read-writemandatory
genEquipUnitAlarmInputSeverity
OBJECT-TYPE
External input alarm severity.
1.3.6.1.4.1.2281.10.1.4.1.1.1.4InputSeverityread-writemandatory
genEquipUnitAlarmInputState
OBJECT-TYPE
The state, raised or cleared, of the external alarm input.
1.3.6.1.4.1.2281.10.1.4.1.1.1.5OffOnread-onlymandatory
genEquipUnitAlarmOutput
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.4.2
genEquipUnitAlarmOutputTable
OBJECT-TYPE
External output alarm table. using the table to manage the admin state of the external input alarm , read the status and set an output group.
1.3.6.1.4.1.2281.10.1.4.2.1not-accessiblemandatory
genEquipUnitAlarmOutputEntry
OBJECT-TYPE
External output alarm table. using the table to manage the admin state of the external input alarm , read the status and set an output group.
1.3.6.1.4.1.2281.10.1.4.2.1.1not-accessiblemandatory
genEquipUnitAlarmOutputCounter
OBJECT-TYPE
External output alarm table index.
1.3.6.1.4.1.2281.10.1.4.2.1.1.1INTEGERread-onlymandatory
genEquipUnitAlarmOutputAdmin
OBJECT-TYPE
The Admin state of the External output alarm. When 'Enabled', the functionality will be: (i) If no alarms are raised, the N.O. (normally open) contact will be opened, while the N.C. (normally closed) contact will be connected to the COM contact. (ii) When an alarm is raised, or the system power is OFF, the N.O will be connected to the COM contact, while the N.C. contact will remain opened. When 'Test' option is selected, the dry contacts behave as an alarm is raised in the system, as described in case (ii) above.
1.3.6.1.4.1.2281.10.1.4.2.1.1.2INTEGER {disable(0), enable(1), test(2)}read-writemandatory
genEquipUnitAlarmOutputStatus
OBJECT-TYPE
The current stauts of the External output alarm table.
1.3.6.1.4.1.2281.10.1.4.2.1.1.3INTEGER {off(0), on(1), on-test(2)}read-onlymandatory
genEquipUnitAlarmOutputGroup
OBJECT-TYPE
The description of the group to which the external output alarm belongs.
1.3.6.1.4.1.2281.10.1.4.2.1.1.4INTEGER {communication(1), quality-of-service(2), processing(3), equipment(4), environmental(5), all-groups(6)}read-writemandatory
genEquipUnitShelf
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.5
genEquipUnitShelfInstallation
OBJECT-TYPE
This value indicates the NE installation type (standalone or module/card within a chassis).
1.3.6.1.4.1.2281.10.1.5.1INTEGER {standalone(0), chassisModule(1)}read-onlymandatory
genEquipUnitShelfModuleRole
OBJECT-TYPE
This value indicates the NE module role (main unit or extention).
1.3.6.1.4.1.2281.10.1.5.2INTEGER {main(0), extention(1)}read-onlymandatory
genEquipUnitShelfSlotLabel
OBJECT-TYPE
Slot label is a user defined description for the module in the slot.
1.3.6.1.4.1.2281.10.1.5.3DisplayString (SIZE(0..255))read-writemandatory
genEquipUnitShelfArchivesOperationStatus
OBJECT-TYPE
Shelf-wide configuration archives [backup/restore] operation status. Used also when creating archive for unit info. Relevant only for main units. - ready(0) - inProgress(1), - success(2), - failure(3)
1.3.6.1.4.1.2281.10.1.5.4ProgressStatusread-onlymandatory
genEquipUnitShelfManagmentTable
OBJECT-TYPE
This table contains information about the IDUs that may be in the shelf (population, communication status, most severe alarm) and provides the ability to backup/restore SW for each IDU. Relevant only for main units.
1.3.6.1.4.1.2281.10.1.5.5not-accessiblemandatory
genEquipUnitShelfManagmentEntry
OBJECT-TYPE
This table keeps the shelf information on all the modules in the shelf (population, status, most severe alarm) and provides the ability for backup/restore command or SW download. Relevant only for main units.
1.3.6.1.4.1.2281.10.1.5.5.1not-accessiblemandatory
genEquipUnitShelfManagmentSlot
OBJECT-TYPE
This value is the slot number used as an index for this table.
1.3.6.1.4.1.2281.10.1.5.5.1.1SlotIdread-onlymandatory
genEquipUnitShelfManagmentSlotPopulation
OBJECT-TYPE
Slot population state, which indicates if the slot is occupied or not. Relevant only for main units.
1.3.6.1.4.1.2281.10.1.5.5.1.2INTEGER {not-present(0), present(1)}read-onlymandatory
genEquipUnitShelfManagmentCommunicationStatus
OBJECT-TYPE
This value indicates if the slot can be reached or not. Relevant only for main units.
1.3.6.1.4.1.2281.10.1.5.5.1.3INTEGER {communicationDown(0), communicationUp(1)}read-onlymandatory
genEquipUnitShelfManagmentSlotMostSevereAlarm
OBJECT-TYPE
This value is the most severe alarm for the module on this slot. Relevant only for main unit.
1.3.6.1.4.1.2281.10.1.5.5.1.4Severityread-onlymandatory
genEquipUnitShelfManagmentMngSwCommand
OBJECT-TYPE
The command to be executed to manage SW versions. Relevant only for main units. Possible values are: - noOperation(0) - downloadUpgradeVersion(1) - upgrade(2) - rollback(3) - downgrade(4) - downloadDowngradeVersion(5)
1.3.6.1.4.1.2281.10.1.5.5.1.5SwCommandread-writemandatory
genEquipUnitShelfManagmentSlotReset
OBJECT-TYPE
This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.
1.3.6.1.4.1.2281.10.1.5.5.1.6OffOnread-writemandatory
genEquipUnitShelfManagmentSlotIp
OBJECT-TYPE
Slot SNMP Management IP address.
1.3.6.1.4.1.2281.10.1.5.5.1.7IpAddressread-writemandatory
genEquipUnitShelfReset
OBJECT-TYPE
This parameter allows resetting of entire shelf.
1.3.6.1.4.1.2281.10.1.5.6OffOnread-writemandatory
genEquipUnitshelfAllODUAdmin
OBJECT-TYPE
The unit is configured as all outdoor unit, enable or disable it.
1.3.6.1.4.1.2281.10.1.5.7EnableDisableread-writemandatory
genEquipUnitShelfSlotConfigTable
OBJECT-TYPE
Slot configuration table.
1.3.6.1.4.1.2281.10.1.5.8not-accessiblemandatory
genEquipUnitShelfSlotConfigEntry
OBJECT-TYPE
This table allows configuration of card population parameters.
1.3.6.1.4.1.2281.10.1.5.8.1not-accessiblemandatory
genEquipUnitShelfSlotConfigSlotID
OBJECT-TYPE
This value is the slot number used as an index for this table.
1.3.6.1.4.1.2281.10.1.5.8.1.1SlotIdread-onlymandatory
genEquipUnitShelfSlotConfigExpectedCardType
OBJECT-TYPE
Expected card type in current slot.
1.3.6.1.4.1.2281.10.1.5.8.1.2InventoryCardTyperead-writemandatory
genEquipUnitShelfSlotConfigLabel
OBJECT-TYPE
Slot label.
1.3.6.1.4.1.2281.10.1.5.8.1.3DisplayStringread-writemandatory
genEquipUnitShelfSlotConfigAdmin
OBJECT-TYPE
Slot admin state.
1.3.6.1.4.1.2281.10.1.5.8.1.4EnableDisableread-writemandatory
genEquipUnitShelfSlotConfigSlotReset
OBJECT-TYPE
This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.
1.3.6.1.4.1.2281.10.1.5.8.1.5OffOnread-writemandatory
genEquipUnitShelfTccConfigTable
OBJECT-TYPE
TCC configuration table.
1.3.6.1.4.1.2281.10.1.5.9not-accessiblemandatory
genEquipUnitShelfTccConfigEntry
OBJECT-TYPE
This table allows configuration of TCC population parameters.
1.3.6.1.4.1.2281.10.1.5.9.1not-accessiblemandatory
genEquipUnitShelfTccConfigSlotID
OBJECT-TYPE
This value is the TCC slot number used as an index for this table.
1.3.6.1.4.1.2281.10.1.5.9.1.1SlotIdread-onlymandatory
genEquipUnitShelfTccConfigExpectedCardType
OBJECT-TYPE
Expected card type in current TCC slot.
1.3.6.1.4.1.2281.10.1.5.9.1.2InventoryCardTyperead-writemandatory
genEquipUnitShelfTccConfigLabel
OBJECT-TYPE
TCC label.
1.3.6.1.4.1.2281.10.1.5.9.1.3DisplayStringread-writemandatory
genEquipUnitShelfTccConfigAdmin
OBJECT-TYPE
TCC admin state.
1.3.6.1.4.1.2281.10.1.5.9.1.4EnableDisableread-writemandatory
genEquipUnitShelfTccConfigReset
OBJECT-TYPE
This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.
1.3.6.1.4.1.2281.10.1.5.9.1.5OffOnread-writemandatory
genEquipUnitShelfSlotStatusTable
OBJECT-TYPE
This table contains information about the status of the cards currently inserted in the system.
1.3.6.1.4.1.2281.10.1.5.10not-accessiblemandatory
genEquipUnitShelfSlotStatusEntry
OBJECT-TYPE
This table entry contains information about the status of the cards currently inserted in the system.
1.3.6.1.4.1.2281.10.1.5.10.1not-accessiblemandatory
genEquipUnitShelfSlotStatusSlotID
OBJECT-TYPE
Slot where PW-LIC is inserted.
1.3.6.1.4.1.2281.10.1.5.10.1.1SlotIdread-onlymandatory
genEquipUnitShelfSlotStatusOccupancy
OBJECT-TYPE
Slot Occupancy.
1.3.6.1.4.1.2281.10.1.5.10.1.2CardOccupancyread-onlymandatory
genEquipUnitShelfSlotStatusAllowedCardTypes
OBJECT-TYPE
shelf slot allowed card types.
1.3.6.1.4.1.2281.10.1.5.10.1.3Counter64read-onlymandatory
genEquipUnitShelfSlotStatusCardType
OBJECT-TYPE
Shelf Slot card type.
1.3.6.1.4.1.2281.10.1.5.10.1.4InventoryCardTyperead-onlymandatory
genEquipUnitShelfSlotStatusOperationalState
OBJECT-TYPE
Operational State.
1.3.6.1.4.1.2281.10.1.5.10.1.5OperStateread-onlymandatory
genEquipUnitShelfSlotStatusCommunication
OBJECT-TYPE
Slot Operational State.
1.3.6.1.4.1.2281.10.1.5.10.1.6DownUpread-onlymandatory
genEquipUnitShelfTccStatusTable
OBJECT-TYPE
This table contains information about the status of the TCC currently inserted in the system.
1.3.6.1.4.1.2281.10.1.5.11not-accessiblemandatory
genEquipUnitShelfTccStatusEntry
OBJECT-TYPE
This table entry contains information about the status of the TCC currently inserted in the system.
1.3.6.1.4.1.2281.10.1.5.11.1not-accessiblemandatory
genEquipUnitShelfTccStatusSlotID
OBJECT-TYPE
Slot where PW-LIC is inserted.
1.3.6.1.4.1.2281.10.1.5.11.1.1SlotIdread-onlymandatory
genEquipUnitShelfTccStatusOccupancy
OBJECT-TYPE
Slot Occupancy.
1.3.6.1.4.1.2281.10.1.5.11.1.2CardOccupancyread-onlymandatory
genEquipUnitShelfTccStatusAllowedCardTypes
OBJECT-TYPE
shelf slot allowed card types.
1.3.6.1.4.1.2281.10.1.5.11.1.3Counter64read-onlymandatory
genEquipUnitShelfTccStatusCardType
OBJECT-TYPE
Shelf Slot card type.
1.3.6.1.4.1.2281.10.1.5.11.1.4InventoryCardTyperead-onlymandatory
genEquipUnitShelfTccStatusOperationalState
OBJECT-TYPE
Operational State.
1.3.6.1.4.1.2281.10.1.5.11.1.5OperStateread-onlymandatory
genEquipUnitShelfTccStatusCommunication
OBJECT-TYPE
Slot Operational State.
1.3.6.1.4.1.2281.10.1.5.11.1.6DownUpread-onlymandatory
genEquipUnitShelfManagmentSeverityTable
OBJECT-TYPE
This table indicates the number of current raised alarms per slot.
1.3.6.1.4.1.2281.10.1.5.12not-accessiblemandatory
genEquipUnitShelfManagmentSeverityEntry
OBJECT-TYPE
This table entry indicates the number of current raised alarms per slot.
1.3.6.1.4.1.2281.10.1.5.12.1not-accessiblemandatory
genEquipUnitShelfManagmentSeveritySlot
OBJECT-TYPE
The slot ID number that identifies it.
1.3.6.1.4.1.2281.10.1.5.12.1.1INTEGERread-onlymandatory
genEquipUnitShelfManagmentSeverityCritical
OBJECT-TYPE
The number of alarms with 'Critical' severity.
1.3.6.1.4.1.2281.10.1.5.12.1.2INTEGERread-onlymandatory
genEquipUnitShelfManagmentSeverityMajor
OBJECT-TYPE
The number of alarms with 'Major' severity.
1.3.6.1.4.1.2281.10.1.5.12.1.3INTEGERread-onlymandatory
genEquipUnitShelfManagmentSeverityMinor
OBJECT-TYPE
The number of alarms with 'Minor' severity.
1.3.6.1.4.1.2281.10.1.5.12.1.4INTEGERread-onlymandatory
genEquipUnitShelfManagmentSeverityWarning
OBJECT-TYPE
The number of alarms with 'Warning' severity.
1.3.6.1.4.1.2281.10.1.5.12.1.5INTEGERread-onlymandatory
genEquipUnitShelfManagmentSeverityIndeterminate
OBJECT-TYPE
The number of alarms with 'Indeterminate' severity.
1.3.6.1.4.1.2281.10.1.5.12.1.6INTEGERread-onlymandatory
genEquipUnitShelfPdcFanStatusTable
OBJECT-TYPE
This table shows for fun card.
1.3.6.1.4.1.2281.10.1.5.13not-accessiblemandatory
genEquipUnitShelfPdcFanStatusEntry
OBJECT-TYPE
This table shows for fun card.
1.3.6.1.4.1.2281.10.1.5.13.1not-accessiblemandatory
genEquipUnitShelfPdcFanStatusPdcFanId
OBJECT-TYPE
pdc-fan-id
1.3.6.1.4.1.2281.10.1.5.13.1.1INTEGERread-onlymandatory
genEquipUnitShelfPdcFanStatusPdcFanExMonitor
OBJECT-TYPE
pdc-fan-existent monitor.
1.3.6.1.4.1.2281.10.1.5.13.1.2EnableDisableread-writemandatory
genEquipUnitShelfPdcFanStatusPdcFanOccupancy
OBJECT-TYPE
card_occupancy.
1.3.6.1.4.1.2281.10.1.5.13.1.3CardOccupancyread-onlymandatory
genEquipUnitShelfPdcFanStatusPdcFanCardType
OBJECT-TYPE
Indicates whether the licensed feature is actually in used or its quantity that currently is in use.
1.3.6.1.4.1.2281.10.1.5.13.1.4InventoryCardTyperead-onlymandatory
genEquipUnitShelfAbcMuxTable
OBJECT-TYPE
This table allows enabling/disabling each ABC MUX group. ABC groups can be defined on top of these MUX.
1.3.6.1.4.1.2281.10.1.5.14not-accessiblemandatory
genEquipUnitShelfAbcMuxEntry
OBJECT-TYPE
This table entry allows enabling/disabling each ABC MUX group. ABC groups can be defined on top of these MUX.
1.3.6.1.4.1.2281.10.1.5.14.1not-accessiblemandatory
genEquipUnitShelfAbcMuxNumber
OBJECT-TYPE
Identifier for each of the possible MUXs which choose between using the ABC trunks or the port for multi-directional radios
1.3.6.1.4.1.2281.10.1.5.14.1.1INTEGERread-onlymandatory
genEquipUnitShelfAbcMuxAdmin
OBJECT-TYPE
Enables the MUX (for ABC) or disables it (for multi-directional radios).
1.3.6.1.4.1.2281.10.1.5.14.1.2EnableDisableread-writemandatory
genEquipUnitShelfMultiplexTrafficSource
OBJECT-TYPE
The parameter multiplex traffic between slot 1 and slot 12.
1.3.6.1.4.1.2281.10.1.5.23INTEGER (1..12)read-writemandatory
genEquipUnitShelfMaskUnderVoltageAlarmFirstPowerFeed
OBJECT-TYPE
Mask undervoltage alarm on 1st DC power feed.
1.3.6.1.4.1.2281.10.1.5.24EnableDisableread-writemandatory
genEquipUnitShelfMaskUnderVoltageAlarmSecondPowerFeed
OBJECT-TYPE
Mask undervoltage alarm on 2nd DC power feed
1.3.6.1.4.1.2281.10.1.5.25EnableDisableread-writemandatory
genEquipProtection
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.6
genEquipProtectionAdmin
OBJECT-TYPE
The Admin mode of the protection. In case of protection2Plus2Hsb this parameter should be configured in the main and extension slots.
1.3.6.1.4.1.2281.10.1.6.1INTEGER {protection1Plus1Hsb(2), protectionDisable(3), protection2Plus2Hsb(4), protection2Plus0Hsb(5)}read-writemandatory
genEquipProtectionMode
OBJECT-TYPE
In protection mode, the card can be either active or standby
1.3.6.1.4.1.2281.10.1.6.2INTEGER {active(0), standby(1)}read-onlymandatory
genEquipProtectionMateIPAddr
OBJECT-TYPE
Same parameter as genEquipNetworkMateIp. In case of 1+1 protection it is the protected card (Mate) IP address. In case of 2+2 protection it is the IP address of the protected unit.
1.3.6.1.4.1.2281.10.1.6.3IpAddressread-onlymandatory
genEquipProtectionMateMACAddr
OBJECT-TYPE
In case of 1+1 protection it is protected card (Mate) MAC address In case of 2+2 protection it is the IP address of the protected unit.
1.3.6.1.4.1.2281.10.1.6.4MacAddressread-onlymandatory
genEquipProtectionRadioExcessiveBERSwitch
OBJECT-TYPE
The Admin state of an Excessive BER threshold. When enabled, crossing the Excessive BER threshold will cause a protection switch.
1.3.6.1.4.1.2281.10.1.6.5EnableDisableread-writemandatory
genEquipProtectionLockout
OBJECT-TYPE
This parameter provides the ability to lock the mode of each card in the protection, meaning to force the fact that protection switch will not occur.
1.3.6.1.4.1.2281.10.1.6.6OffOnread-writemandatory
genEquipProtectionForceSwitch
OBJECT-TYPE
This parameter is a command that forces a protection switch regardless of the state of the standby card.
1.3.6.1.4.1.2281.10.1.6.7OffOnread-writemandatory
genEquipProtectionManualSwitch
OBJECT-TYPE
This parameter is a command that performs manaual protection switch.
1.3.6.1.4.1.2281.10.1.6.8OffOnread-writemandatory
genEquipProtectionCopyToMateComand
OBJECT-TYPE
Setting this parameter to On will copy configured parameters from the active to the standby unit.
1.3.6.1.4.1.2281.10.1.6.9OffOnread-writemandatory
genEquipProtectionCopyToMateStatus
OBJECT-TYPE
This parameter represents the status of the copy-to-mate command when protection is enabled. - ready(0) - inProgress(1), - success(2), - failure(3)
1.3.6.1.4.1.2281.10.1.6.10ProgressStatusread-onlymandatory
genEquipProtectionMultiUnitLAGAdmin
OBJECT-TYPE
This parameter enables the Multi Unit LAG feature. It can be activated only in Single Pipe configuration and only when protection is active (either 1+1 or 2+2).
1.3.6.1.4.1.2281.10.1.6.11EnableDisableread-writemandatory
genEquipProtectionRevertiveAdmin
OBJECT-TYPE
Enable/Disable revertive protection mode. In revertive protection mode one IDU will be defined as a Primary and the other will be Secondary. Revertive protection will always tend to make the Primary IDU active unless it has a hardware failure.
1.3.6.1.4.1.2281.10.1.6.12EnableDisableread-writemandatory
genEquipProtectionRevertivePrimaryIDU
OBJECT-TYPE
Decides whether upper or lower IDU will be primary. When placed in a shelf, the upper will be the upper slot in the shelf. When working in stand-alone mode, the IDU with the highest IP address will be considered as upper.
1.3.6.1.4.1.2281.10.1.6.13INTEGER {lower(0), upper(1)}read-writemandatory
genEquipProtectionRevertiveMinTimer
OBJECT-TYPE
Minimal revertive protection timer period.
1.3.6.1.4.1.2281.10.1.6.14INTEGER (1..30)read-writemandatory
genEquipProtectionRevertiveMaxNumOfTries
OBJECT-TYPE
Maximal number of revertive protection tries. Used to prevent instability. Revertive protection will give up trying to switch to the primary standby IDU path after the maximal number of tries. Setting Zero value will enable revertive protection switch only if the last protection switch was due to a local equipment failure.
1.3.6.1.4.1.2281.10.1.6.15INTEGER (0..10)read-writemandatory
genEquipProtectionRevertiveTimerMultiplier
OBJECT-TYPE
A factor that increases the revertive timer period after each try. Setting 1 value will leave the timer period constantly at its minimal value.
1.3.6.1.4.1.2281.10.1.6.16INTEGER (1..10)read-writemandatory
genEquipProtectionAspRevertive
OBJECT-TYPE
n Smart Pipe HSB mode , this parameter causes the Ethernet line port to be muted upon a complete failure of the radio signal (in both active and standby units)
1.3.6.1.4.1.2281.10.1.6.17EnableDisableread-writemandatory
genEquipDiversity
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1.7
genEquipDiversityType
OBJECT-TYPE
this parameter sets the type of hitless diversity to be used. Notice that only if protection is enabled this has any effect.
1.3.6.1.4.1.2281.10.1.7.1INTEGER {none(1), space-diversity(2), frequency-diversity(3)}read-writemandatory
genEquipDiversityRevertiveMode
OBJECT-TYPE
this parameter sets whether hitless switches are revertive in the event that the primary radio channel doesn't have any errors.
1.3.6.1.4.1.2281.10.1.7.2INTEGER {non-revertive(1), revertive(2)}read-writemandatory
genEquipDiversityPrimaryRadio
OBJECT-TYPE
this parameter sets which IDU contains the primary radio channel to revert to.
1.3.6.1.4.1.2281.10.1.7.3INTEGER {upper-radio(1), lower-radio(2)}read-writemandatory
genEquipDiversityRevertiveTimer
OBJECT-TYPE
This parameter sets the amount of seconds that must pass without a failure in the primary radio before doing a revertive switch.
1.3.6.1.4.1.2281.10.1.7.4INTEGER (1..15)read-writemandatory
genEquipDiversityForceActive
OBJECT-TYPE
This parameter allows forcing incoming traffic to be taken from either of the radios (or none) for testing purposes.
1.3.6.1.4.1.2281.10.1.7.5INTEGER {none(0), local-radio(1), mate-radio(2)}read-writemandatory
genEquipDiversitySwitchCounter
OBJECT-TYPE
This parameter shows the number of hitless switches performed since last time counter was cleared.
1.3.6.1.4.1.2281.10.1.7.6INTEGERread-onlymandatory
genEquipDiversitySwitchCounterClear
OBJECT-TYPE
This parameter allows clearing of switch counter.
1.3.6.1.4.1.2281.10.1.7.7OffOnread-writemandatory
genEquipDiversityReceiveRadio
OBJECT-TYPE
This parameter shows from which radio the traffic is currently being taken.
1.3.6.1.4.1.2281.10.1.7.8INTEGER {lower-idu(0), upper-idu(1)}read-onlymandatory
genEquipFault
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.3
genEquipCurrentAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.3.1
genEquipCurrentAlarmLastChangeCounter
OBJECT-TYPE
This counter is initialized with a random number after resest, and incremented on each change in the CurrentAlarmTable
1.3.6.1.4.1.2281.10.3.1.1INTEGERread-onlymandatory
genEquipCurrentAlarmTable
OBJECT-TYPE
This table includes the current alarm (when a RAISED trap is sent, an alarm is added to the table, when a CLEAR trap is sent, the alarm is removed).
1.3.6.1.4.1.2281.10.3.1.2not-accessiblemandatory
genEquipCurrentAlarmEntry
OBJECT-TYPE
Entry containing the info of current RAISED traps.
1.3.6.1.4.1.2281.10.3.1.2.1not-accessiblemandatory
genEquipCurrentAlarmCounter
OBJECT-TYPE
A running counter of open alarms, incremented upon each new alarm.
1.3.6.1.4.1.2281.10.3.1.2.1.1INTEGERread-onlymandatory
genEquipCurrentAlarmRaisedTimeT
OBJECT-TYPE
The rasied time of this alarm. Time in seconds since January 1, 1970 00:00 UTC.
1.3.6.1.4.1.2281.10.3.1.2.1.2INTEGERread-onlymandatory
genEquipCurrentAlarmId
OBJECT-TYPE
Alarm ID. List of alarm IDs is available in the MIB Ref. Guide.
1.3.6.1.4.1.2281.10.3.1.2.1.3INTEGERread-onlymandatory
genEquipCurrentAlarmName
OBJECT-TYPE
Alarm name (the parameter and entity in the CLI) for example 'radio/framer/radio-lof'
1.3.6.1.4.1.2281.10.3.1.2.1.4DisplayStringread-onlymandatory
genEquipCurrentAlarmInstance
OBJECT-TYPE
In the case of alarms that may have several appereances (at interfaces, channels, VCs, etc.), this parameter indicates the instance of the alarm.
1.3.6.1.4.1.2281.10.3.1.2.1.5INTEGERread-onlymandatory
genEquipCurrentAlarmSeverity
OBJECT-TYPE
The current Alarm severity the values can be: - indeterminate(0) - critical(1) - major(2) - minor(3) - warning(4) - cleared(5)
1.3.6.1.4.1.2281.10.3.1.2.1.6Severityread-onlymandatory
genEquipCurrentAlarmIfIndex
OBJECT-TYPE
Interface Index where the alarm occurred, alarms that are not associated with specific interfaces will have the following value: For a non-interface alarm, the value is: 65001
1.3.6.1.4.1.2281.10.3.1.2.1.7INTEGERread-onlymandatory
genEquipCurrentAlarmModule
OBJECT-TYPE
The module of the alarm. Possible values are 'IDU' or 'RFU'.
1.3.6.1.4.1.2281.10.3.1.2.1.8DisplayStringread-onlymandatory
genEquipCurrentAlarmDesc
OBJECT-TYPE
The alarm description (same as the description in the sent trap).
1.3.6.1.4.1.2281.10.3.1.2.1.9DisplayStringread-onlymandatory
genEquipCurrentAlarmProbableCause
OBJECT-TYPE
The alarm probable cause.
1.3.6.1.4.1.2281.10.3.1.2.1.10DisplayStringread-onlymandatory
genEquipCurrentAlarmCorrectiveActions
OBJECT-TYPE
The alarm corrective actions.
1.3.6.1.4.1.2281.10.3.1.2.1.11DisplayStringread-onlymandatory
genEquipCurrentAlarmState
OBJECT-TYPE
The state of the alarm (cleared or rasied).
1.3.6.1.4.1.2281.10.3.1.2.1.12INTEGER {cleared(0), raised(1), event(2)}read-onlymandatory
genEquipCurrentAlarmSlotId
OBJECT-TYPE
The ID of the slot originating the alarm.
1.3.6.1.4.1.2281.10.3.1.2.1.13SlotIdread-onlymandatory
genEquipCurrentAlarmAdditionalInfo
OBJECT-TYPE
Additional information that may further qualify the source of the alarm.
1.3.6.1.4.1.2281.10.3.1.2.1.14DisplayStringread-onlymandatory
genEquipCurrentAlarmUserText
OBJECT-TYPE
An additional description of the event or fault, or any other information that user wants to attach to it.
1.3.6.1.4.1.2281.10.3.1.2.1.15DisplayStringread-onlymandatory
genEquipMostSevereAlarm
OBJECT-TYPE
The severity of the most severe alarm in the system
1.3.6.1.4.1.2281.10.3.1.3Severityread-onlymandatory
genEquipAlarmConfigDefault
OBJECT-TYPE
Allows to revert back to the default values of all alarm configurations
1.3.6.1.4.1.2281.10.3.1.4OffOnread-writemandatory
genEquipAlarmConfigTable
OBJECT-TYPE
This table allows system alarms configuration.
1.3.6.1.4.1.2281.10.3.1.5not-accessiblemandatory
genEquipAlarmConfigEntry
OBJECT-TYPE
This table entry allows system alarms configuration.
1.3.6.1.4.1.2281.10.3.1.5.1not-accessiblemandatory
genEquipAlarmConfigId
OBJECT-TYPE
he alarm unique Id number that identifies it.
1.3.6.1.4.1.2281.10.3.1.5.1.1INTEGERread-onlymandatory
genEquipAlarmConfigSeverity
OBJECT-TYPE
The perceived severity of the raised alarm.
1.3.6.1.4.1.2281.10.3.1.5.1.2Severityread-writemandatory
genEquipAlarmConfigDescr
OBJECT-TYPE
The description of the raised alarm.
1.3.6.1.4.1.2281.10.3.1.5.1.3DisplayStringread-writemandatory
genEquipAlarmConfigAdditionalText
OBJECT-TYPE
An additional description of the fault, or any other information that user wants to attach to it.
1.3.6.1.4.1.2281.10.3.1.5.1.4DisplayStringread-writemandatory
genEquipAlarmServiceAffect
OBJECT-TYPE
Indicates whether the raised alarm affects a service.
1.3.6.1.4.1.2281.10.3.1.5.1.5OffOnread-writemandatory
genEquipTrapCfg
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.3.2
genEquipTrapCfgMgrTable
OBJECT-TYPE
This table indicates the Trap manager list.
1.3.6.1.4.1.2281.10.3.2.1not-accessiblemandatory
genEquipTrapCfgMgrEntry
OBJECT-TYPE
Entry containing the manager IP addresses and the trap filter options.
1.3.6.1.4.1.2281.10.3.2.1.1not-accessiblemandatory
genEquipTrapCfgMgrId
OBJECT-TYPE
This value indicates an index of a specific manager
1.3.6.1.4.1.2281.10.3.2.1.1.1INTEGERread-onlymandatory
genEquipTrapCfgMgrAdmin
OBJECT-TYPE
This value indicates an administrative state of a specific manager. disable - will not send traps to this trap manager.
1.3.6.1.4.1.2281.10.3.2.1.1.2EnableDisableread-writemandatory
genEquipTrapCfgMgrIP
OBJECT-TYPE
This value indicates the manager's IP address.
1.3.6.1.4.1.2281.10.3.2.1.1.3IpAddressread-writemandatory
genEquipTrapCfgMgrPort
OBJECT-TYPE
The Port for sending the trap for each manager (possible values: 70-65535)
1.3.6.1.4.1.2281.10.3.2.1.1.4INTEGER (70..65535)read-writemandatory
genEquipTrapCfgMgrName
OBJECT-TYPE
The name of the manager configured to receive the traps
1.3.6.1.4.1.2281.10.3.2.1.1.5DisplayString (SIZE(0..30))read-writemandatory
genEquipTrapCfgMgrCommunity
OBJECT-TYPE
The manager trap community configured.
1.3.6.1.4.1.2281.10.3.2.1.1.6DisplayString (SIZE(0..30))read-writemandatory
genEquipTrapCfgMgrSeverityFilter
OBJECT-TYPE
This is a bit mask value for masking traps according to its severity. There is a bit for each severity. If the relevant bit is on (1), the Agent will send traps with this severity. It won't send traps if the bit is off (0). The list of bits from LSB to MSB: Bit 1 (LSB) - indeterminate Bit 2 - critical Bit 3 - major Bit 4 - minor Bit 5 - warning Bit 6 - cleared
1.3.6.1.4.1.2281.10.3.2.1.1.7INTEGERread-writemandatory
genEquipTrapCfgMgrStatusChangeFilter
OBJECT-TYPE
This value represents the mode in which the traps are sent: If the filter is set to ON - only traps that change the severity of the system are sent. If the filter is set to OFF - all traps (that are not screened by other filters) are sent.
1.3.6.1.4.1.2281.10.3.2.1.1.8OffOnread-writemandatory
genEquipTrapCfgMgrCLLI
OBJECT-TYPE
Common Language Location Identifier (maximum length: 100 chars)
1.3.6.1.4.1.2281.10.3.2.1.1.9DisplayString (SIZE(0..100))read-writemandatory
genEquipTrapCfgMgrHeartbeatPeriod
OBJECT-TYPE
This item defines the interval (in minutes) between each heartbeat trap. A value of '0' disables this feature.
1.3.6.1.4.1.2281.10.3.2.1.1.10INTEGER (0..1440)read-writemandatory
genEquipTrapCfgMgrIPv6
OBJECT-TYPE
The IP-v6 address of the trap manage)
1.3.6.1.4.1.2281.10.3.2.1.1.11OCTET STRING (SIZE(0..16))read-writemandatory
genEquipTrapCfgMgrV3User
OBJECT-TYPE
The manager trap V3 user name configured
1.3.6.1.4.1.2281.10.3.2.1.1.12DisplayStringread-writemandatory
genEquipEventLog
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.3.3
genEquipEventLogTable
OBJECT-TYPE
This table includes the event log.
1.3.6.1.4.1.2281.10.3.3.1not-accessiblemandatory
genEquipEventLogEntry
OBJECT-TYPE
Entry containing the info of the event log table.
1.3.6.1.4.1.2281.10.3.3.1.1not-accessiblemandatory
genEquipEventLogCounter
OBJECT-TYPE
The event counter.
1.3.6.1.4.1.2281.10.3.3.1.1.1INTEGERread-onlymandatory
genEquipEventLogRaisedTimeT
OBJECT-TYPE
The rasied time of this event. Time in seconds since January 1, 1970 00:00 UTC. (time_t format)
1.3.6.1.4.1.2281.10.3.3.1.1.2INTEGERread-onlymandatory
genEquipEventLogSeverity
OBJECT-TYPE
The event severity, possible values are: - indeterminate(0), - critical(1) - major(2) - minor(3) - warning(4) - cleared(5)
1.3.6.1.4.1.2281.10.3.3.1.1.3Severityread-onlymandatory
genEquipEventLogModule
OBJECT-TYPE
The module of the event. ('IDU' or 'RFU')
1.3.6.1.4.1.2281.10.3.3.1.1.4DisplayStringread-onlymandatory
genEquipEventLogDesc
OBJECT-TYPE
The event description (same as the description in the sent trap).
1.3.6.1.4.1.2281.10.3.3.1.1.5DisplayStringread-onlymandatory
genEquipEventLogState
OBJECT-TYPE
The state of the event or alarm. In case of alarm, 'cleard' or 'raised'. In case of event, 'event'.
1.3.6.1.4.1.2281.10.3.3.1.1.6INTEGER {cleared(0), raised(1), event(2)}read-onlymandatory
genEquipEventLogProbableCause
OBJECT-TYPE
The probable cause that may be the reason for the event.
1.3.6.1.4.1.2281.10.3.3.1.1.7DisplayStringread-onlymandatory
genEquipEventLogCorrectiveActions
OBJECT-TYPE
Some possible suggested corrective actions in order to eliminate the raised alarm.
1.3.6.1.4.1.2281.10.3.3.1.1.8DisplayStringread-onlymandatory
genEquipEventLogAdditionalInfo
OBJECT-TYPE
Additional information that may further qualify the source of the event.
1.3.6.1.4.1.2281.10.3.3.1.1.9DisplayStringread-onlymandatory
genEquipEventLogUserText
OBJECT-TYPE
An additional description of the event or fault, or any other information that user wants to attach to it.
1.3.6.1.4.1.2281.10.3.3.1.1.10DisplayStringread-onlymandatory
genEquipEventLogIfIndex
OBJECT-TYPE
If Index of the originated source.
1.3.6.1.4.1.2281.10.3.3.1.1.11INTEGERread-onlymandatory
genEquipEventLogId
OBJECT-TYPE
The Id of the event.
1.3.6.1.4.1.2281.10.3.3.1.1.12INTEGERread-onlymandatory
genEquipEventLogClear
OBJECT-TYPE
The clear event log command. If enabled, will clear the event log.
1.3.6.1.4.1.2281.10.3.3.2OffOnread-writemandatory
genEquipEventLogLastChangeCounter
OBJECT-TYPE
This counter is initialized with a random number after reset, and incremented on each change in the EventLogTable
1.3.6.1.4.1.2281.10.3.3.3INTEGERread-onlymandatory
genEquipFaultErrno
OBJECT-TYPE
The application last error number. List of Errnos are located in the MIB Ref Guide.
1.3.6.1.4.1.2281.10.3.4INTEGERread-onlymandatory
genEquipFaultErrDescr
OBJECT-TYPE
The application last error description. List of Errnos are located in the MIB Ref Guide.
1.3.6.1.4.1.2281.10.3.5DisplayStringread-onlymandatory
genEquipMng
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4
genEquipMngSw
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.1
genEquipMngSwServerUrl
OBJECT-TYPE
Remote SW Update Server URL where SW updates reside
1.3.6.1.4.1.2281.10.4.1.1DisplayStringread-writemandatory
genEquipMngSwServerLogin
OBJECT-TYPE
Remote server login
1.3.6.1.4.1.2281.10.4.1.2DisplayStringread-writemandatory
genEquipMngSwServerPassword
OBJECT-TYPE
Remote server password
1.3.6.1.4.1.2281.10.4.1.3DisplayStringread-writemandatory
genEquipMngSwProxyUrl
OBJECT-TYPE
Proxy Server Url. This parameter is obsolete and should not be in used.
1.3.6.1.4.1.2281.10.4.1.4DisplayStringread-onlyobsolete
genEquipMngSwProxyLogin
OBJECT-TYPE
Proxy server login This parameter is obsolete and should not be in used.
1.3.6.1.4.1.2281.10.4.1.5DisplayStringread-onlyobsolete
genEquipMngSwProxyPassword
OBJECT-TYPE
Proxy server password This parameter is obsolete and should not be in used.
1.3.6.1.4.1.2281.10.4.1.6DisplayStringread-onlyobsolete
genEquipMngSwDownloadStatus
OBJECT-TYPE
Download software status. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3)
1.3.6.1.4.1.2281.10.4.1.7ProgressStatusread-onlymandatory
genEquipMngSwInstallStatus
OBJECT-TYPE
Install software status. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3)
1.3.6.1.4.1.2281.10.4.1.8ProgressStatusread-onlymandatory
genEquipMngSwCommand
OBJECT-TYPE
The command that is executed to manage SW versions. Depending on the value given, a different operation will be carried out involving FTP and/or version installing. Notice that software will be installed in all slots in a shelf and reset will be automatically carried out at the end of the installation process. Possible values are: - noOperation(0) - downloadUpgradeVersion(1) - load a newer version from FTP site - upgrade(2) - upgrade to newer version which has already been loaded - rollback(3) - install a previously working version without downloading - downgrade(4) - downgrade to an older version which has alredy been loaded - downloadDowngradeVersion(5) - load an older version from FTP site - upgradeTimer(6) - Starts the timer defined in genEquipMngSwInstallationTimer and upon expiration upgrades to a newer version which has already been loaded. - rollbackTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer and upon expiration install a previously working version without downloading - downgradeTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer and upon expiration downgrades to an older which has already been loaded - abortTimedTnstallation(9) stops a counting timer; the installation process will not take place. Notice that it does not stop an installation process once started.
1.3.6.1.4.1.2281.10.4.1.9SwCommandTimerread-writemandatory
genEquipMngSwInstalledIduVersion
OBJECT-TYPE
This value indicates the Package Version of the installed IDU SW
1.3.6.1.4.1.2281.10.4.1.10DisplayStringread-onlymandatory
genEquipMngSwInstalledRfuVersion
OBJECT-TYPE
This value indicates the Package version of the installed RFU SW.
1.3.6.1.4.1.2281.10.4.1.11DisplayStringread-onlymandatory
genEquipMngSwVersions
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.1.13
genEquipMngSwIDUVersionsTable
OBJECT-TYPE
This table contains all IDU running versions.
1.3.6.1.4.1.2281.10.4.1.13.1not-accessiblemandatory
genEquipMngSwIDUVersionsEntry
OBJECT-TYPE
Entry containing the info of the IDU Versions table.
1.3.6.1.4.1.2281.10.4.1.13.1.1not-accessiblemandatory
genEquipMngSwIDUVersionsCounter
OBJECT-TYPE
This is the index of this table.
1.3.6.1.4.1.2281.10.4.1.13.1.1.1INTEGERread-onlymandatory
genEquipMngSwIDUVersionsPackageName
OBJECT-TYPE
The package name
1.3.6.1.4.1.2281.10.4.1.13.1.1.2DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsTargetDevice
OBJECT-TYPE
The Target device within the NE (i.e. Modem, FPGA, IDU)
1.3.6.1.4.1.2281.10.4.1.13.1.1.3DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsRunningVersion
OBJECT-TYPE
The running version.
1.3.6.1.4.1.2281.10.4.1.13.1.1.4DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsInstalledVersion
OBJECT-TYPE
The installed version is similar to the running version, besides packages that are not currently running. Those packages will have in the running version 'N/A' while in the installed version there is a version number. For example, in equipment without daughter-board, some of the packages will be installed but not running.
1.3.6.1.4.1.2281.10.4.1.13.1.1.5DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsUpgradePackage
OBJECT-TYPE
In case the user performs an upgrade, this version will be the running/installed version
1.3.6.1.4.1.2281.10.4.1.13.1.1.6DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsDowngradePackage
OBJECT-TYPE
In case the user performs downgrade, this version will be the running/installed version.
1.3.6.1.4.1.2281.10.4.1.13.1.1.7DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsResetType
OBJECT-TYPE
Minimum level of reset required to update the software in the relevant module.
1.3.6.1.4.1.2281.10.4.1.13.1.1.8INTEGER {noReset(0), appWarmReset(1), tccColdReset(2), mainBoardColdReset(3), mainBoardWarmReset(4), applicationRestart(5), cardReset(6), notApplicable(7)}read-onlymandatory
genEquipMngSwTimerTable
OBJECT-TYPE
This table contains all IDU running versions.
1.3.6.1.4.1.2281.10.4.1.13.2not-accessiblemandatory
genEquipMngSwTimerEntry
OBJECT-TYPE
Entry containing the info of the IDU Versions table.
1.3.6.1.4.1.2281.10.4.1.13.2.1not-accessiblemandatory
genEquipMngSwTimerSlotNumber
OBJECT-TYPE
The slot ID of the unit for this timer; 0 is for stand-alone units.
1.3.6.1.4.1.2281.10.4.1.13.2.1.1INTEGER (1..6)read-onlymandatory
genEquipMngSwTimerInstallationTimer
OBJECT-TYPE
The timer (in minutes) for software installation operations to this unit.
1.3.6.1.4.1.2281.10.4.1.13.2.1.2INTEGER (1..1440)read-writemandatory
genEquipMngSwTimerTimeToInstall
OBJECT-TYPE
The amount of time (in seconds) from now for the unit to perform software installation. Zero denotes that no operation has been requested.
1.3.6.1.4.1.2281.10.4.1.13.2.1.3INTEGER (1..86400)read-onlymandatory
genEquipMngSwTimerTimerAbort
OBJECT-TYPE
This parameter is used to stop the count-down to the software update action.
1.3.6.1.4.1.2281.10.4.1.13.2.1.4INTEGER {proceed(0), abort(1)}read-writemandatory
genEquipMngSwFTPTimer
OBJECT-TYPE
Time (in seconds) until file transfer is failed.
1.3.6.1.4.1.2281.10.4.1.13.10INTEGERread-writemandatory
genEquipMngSwInstallationTimer
OBJECT-TYPE
The timer (in minutes) for timed software installation operations to this unit
1.3.6.1.4.1.2281.10.4.1.14INTEGER (1..1440)read-writemandatory
genEquipMngSwTimeToInstall
OBJECT-TYPE
The amount of time (in minutes) from now for the unit to perform software installation. Zero denotes that no operation has been requested
1.3.6.1.4.1.2281.10.4.1.15INTEGER (1..1440)read-onlymandatory
genEquipMngSwUpgradeCommonRfuVersion
OBJECT-TYPE
This value indicates the Package version of the installed RFU SW.
1.3.6.1.4.1.2281.10.4.1.16DisplayStringread-onlymandatory
genEquipMngSwDowngradeCommonRfuVersion
OBJECT-TYPE
This value indicates the Package version of the installed RFU SW.
1.3.6.1.4.1.2281.10.4.1.17DisplayStringread-onlymandatory
genEquipMngSwFileTransferTable
OBJECT-TYPE
This table allows configuring the details of the external server where software versions should be located.
1.3.6.1.4.1.2281.10.4.1.18not-accessiblemandatory
genEquipMngSwFileTransferEntry
OBJECT-TYPE
Entry containing the info of software management file transfer.
1.3.6.1.4.1.2281.10.4.1.18.1not-accessiblemandatory
genEquipMngSwFileTransferIndex
OBJECT-TYPE
The index of the table.
1.3.6.1.4.1.2281.10.4.1.18.1.1INTEGERread-onlymandatory
genEquipMngSwFileTransferProtocol
OBJECT-TYPE
The protocol to use to transfer the files between the system and an external computer.
1.3.6.1.4.1.2281.10.4.1.18.1.2FtpProtocolTyperead-writemandatory
genEquipMngSwFileTransferUserName
OBJECT-TYPE
User name for access to the configuration files location.
1.3.6.1.4.1.2281.10.4.1.18.1.3DisplayStringread-writemandatory
genEquipMngSwFileTransferPassword
OBJECT-TYPE
Password for access to the software version files location.
1.3.6.1.4.1.2281.10.4.1.18.1.4DisplayStringread-writemandatory
genEquipMngSwFileTransferAddress
OBJECT-TYPE
IP address of the computer where software version files are to be taken from.
1.3.6.1.4.1.2281.10.4.1.18.1.5IpAddressread-writemandatory
genEquipMngSwFileTransferPath
OBJECT-TYPE
Location of the files in the external server.
1.3.6.1.4.1.2281.10.4.1.18.1.6DisplayStringread-writemandatory
genEquipMngSwFileTransferIpv6Address
OBJECT-TYPE
IPv6 Server Address.
1.3.6.1.4.1.2281.10.4.1.18.1.7OCTET STRING (SIZE(0..16))read-writemandatory
genEquipMngSwFileTransferStatusTable
OBJECT-TYPE
This table shows the status of the current software version file transfer operation.
1.3.6.1.4.1.2281.10.4.1.19not-accessiblemandatory
genEquipMngSwFileTransferStatusEntry
OBJECT-TYPE
Entry containing the info of software management file transfer status.
1.3.6.1.4.1.2281.10.4.1.19.1not-accessiblemandatory
genEquipMngSwFileTransferStatusIndex
OBJECT-TYPE
The index of the table..
1.3.6.1.4.1.2281.10.4.1.19.1.1INTEGERread-onlymandatory
genEquipMngSwFileTransferStatusResult
OBJECT-TYPE
Status of the current file transfer operation.
1.3.6.1.4.1.2281.10.4.1.19.1.2INTEGER {ready(0), downloadStarted(1), verifyingDownloadFiles(2), downloadInProgress(3), downloadSuccess(4), downloadFailure(5), allComponentsExist(6), versionIncompatibleWithSystem(7), incompleteFileSet(8), componentUnsupportedByHw(9), corruptSwFiles(10), missingDependencies(11), downloadCancelled(12)}read-onlymandatory
genEquipMngSwFileTransferPercentageDone
OBJECT-TYPE
An indication of the progress of the process of the current file transfer operation.
1.3.6.1.4.1.2281.10.4.1.19.1.3INTEGER (0..100)read-onlymandatory
genEquipMngSwFileTransferPercentageDoneStandBy
OBJECT-TYPE
An indication of the progress of the process of the current internal file transfer operation.
1.3.6.1.4.1.2281.10.4.1.19.1.4INTEGER (0..100)read-onlymandatory
genEquipMngSwFileTransferStatusResultStandBy
OBJECT-TYPE
Status of the current internal file transfer operation.
1.3.6.1.4.1.2281.10.4.1.19.1.5INTEGER {ready(0), download-started(1), verifying-download-files(2)}read-onlymandatory
genEquipMngSwInstallStatusTable
OBJECT-TYPE
This table shows the status of the current software version installation operation.
1.3.6.1.4.1.2281.10.4.1.20not-accessiblemandatory
genEquipMngSwInstallStatusEntry
OBJECT-TYPE
Entry containing the info of software installation status.
1.3.6.1.4.1.2281.10.4.1.20.1not-accessiblemandatory
genEquipMngSwInstallStatusIndex
OBJECT-TYPE
The index of the table..
1.3.6.1.4.1.2281.10.4.1.20.1.1INTEGERread-onlymandatory
genEquipMngSwInstallStatusResult
OBJECT-TYPE
Status of the current installation operation.
1.3.6.1.4.1.2281.10.4.1.20.1.2INTEGER {ready(0), installationStarted(1), verifyingInstallationFiles(2), installationInProgress(3), installationSuccess(4), installationPartialSuccess(5), installationFailure(6), incompleteSwVersion(7), installationCancelled(8)}read-onlymandatory
genEquipMngSwInstallPercentageDone
OBJECT-TYPE
An indication of the progress of the process of the current installation operation.
1.3.6.1.4.1.2281.10.4.1.20.1.3INTEGER (0..100)read-onlymandatory
genEquipMngSwInstallStatusResultStandBy
OBJECT-TYPE
Status of the current file transfer operation.
1.3.6.1.4.1.2281.10.4.1.20.1.4INTEGER {ready(0), installationStarted(1), verifyingInstallationFiles(2), installationInProgress(3), installationSuccess(4), installationPartialSuccess(5), installationFailure(6), incompleteSwVersion(7), installationCancelled(8)}read-onlymandatory
genEquipMngSwInstallPercentageDoneStandBy
OBJECT-TYPE
An indication of the progress of the process of the current installation operation.
1.3.6.1.4.1.2281.10.4.1.20.1.5INTEGER (0..100)read-onlymandatory
genEquipMngSwOperationTable
OBJECT-TYPE
This table allows downloading and installing SW versions.
1.3.6.1.4.1.2281.10.4.1.21not-accessiblemandatory
genEquipMngSwOperationEntry
OBJECT-TYPE
Entry containing the info of software management operation table.
1.3.6.1.4.1.2281.10.4.1.21.1not-accessiblemandatory
genEquipMngSwOperationIndex
OBJECT-TYPE
The index of the table..
1.3.6.1.4.1.2281.10.4.1.21.1.1INTEGERread-onlymandatory
genEquipMngSwOperationOperation
OBJECT-TYPE
The operation to be performed: download, install, update backup, swap boot section, abort installation timer.
1.3.6.1.4.1.2281.10.4.1.21.1.2INTEGER {noAction(0), download(1), install(2), updateBackup(3), swapBootSection(4), abortTimer(5)}read-writemandatory
genEquipMngSwOperationTimedInstallation
OBJECT-TYPE
Whether to perform the installation after a configurable timer expires.
1.3.6.1.4.1.2281.10.4.1.21.1.3NoYesread-writemandatory
genEquipMngSwSlotRunningVersionTable
OBJECT-TYPE
This table shows the versions currently running in cards installed in the system.
1.3.6.1.4.1.2281.10.4.1.22not-accessiblemandatory
genEquipMngSwSlotRunningVersionEntry
OBJECT-TYPE
This table entry shows the versions currently running in cards installed in the system.
1.3.6.1.4.1.2281.10.4.1.22.1not-accessiblemandatory
genEquipMngSwSlotRunningVersionSlotId
OBJECT-TYPE
The index of the table..
1.3.6.1.4.1.2281.10.4.1.22.1.1INTEGER (1..12)read-onlymandatory
genEquipMngSwSlotRunningVersionCardType
OBJECT-TYPE
Type of card inserted in slot.
1.3.6.1.4.1.2281.10.4.1.22.1.2InventoryCardTyperead-onlymandatory
genEquipMngSwSlotRunningVersionComponent
OBJECT-TYPE
Name of SW functional component.
1.3.6.1.4.1.2281.10.4.1.22.1.3DisplayStringread-onlymandatory
genEquipMngSwSlotRunningVersionActualVersion
OBJECT-TYPE
Version of running SW.
1.3.6.1.4.1.2281.10.4.1.22.1.4DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsStandByTable
OBJECT-TYPE
This table shows the software versions residing in the standby unit.
1.3.6.1.4.1.2281.10.4.1.23not-accessiblemandatory
genEquipMngSwIDUVersionsStandByEntry
OBJECT-TYPE
This table entry shows the software versions residing in the standby unit.
1.3.6.1.4.1.2281.10.4.1.23.1not-accessiblemandatory
genEquipMngSwIDUVersionsStandByIndex
OBJECT-TYPE
mate rpm index.
1.3.6.1.4.1.2281.10.4.1.23.1.1INTEGERread-onlymandatory
genEquipMngSwIDUVersionsStandByPackageName
OBJECT-TYPE
Name of the module which the software package belongs to.
1.3.6.1.4.1.2281.10.4.1.23.1.2DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsStandByRunningVersion
OBJECT-TYPE
Version currently running.
1.3.6.1.4.1.2281.10.4.1.23.1.3DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsStandByInstalledVersion
OBJECT-TYPE
Currently installed version; upon the appropriate reset this will become the running version.
1.3.6.1.4.1.2281.10.4.1.23.1.4DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsStandByTargetDevice
OBJECT-TYPE
The HW board in which the SW module from the mate is running.
1.3.6.1.4.1.2281.10.4.1.23.1.5InventoryCardTyperead-onlymandatory
genEquipMngSwIDUVersionsStandByDownloadedPackage
OBJECT-TYPE
Version that was downloaded from server upon installation, it will become the installed version.
1.3.6.1.4.1.2281.10.4.1.23.1.6DisplayStringread-onlymandatory
genEquipMngSwIDUVersionsStandByResetType
OBJECT-TYPE
Minimum level of reset required to update the software in the relevant module.
1.3.6.1.4.1.2281.10.4.1.23.1.7VmResetTyperead-onlymandatory
genEquipMngSwWatchdogAdmin
OBJECT-TYPE
Enables/Disables the watchdog timer for the application.
1.3.6.1.4.1.2281.10.4.1.35EnableDisableread-writemandatory
genEquipMngCfg
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.2
genEquipMngCfgBackupStatus
OBJECT-TYPE
This parameter shows the current state of the configuration backup files creation in the IDU. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3)
1.3.6.1.4.1.2281.10.4.2.1ProgressStatusread-onlymandatory
genEquipMngCfgRestoreStatus
OBJECT-TYPE
This parameter shows the current state of configuration restoring from downloaded backup files. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3)
1.3.6.1.4.1.2281.10.4.2.2ProgressStatusread-onlymandatory
genEquipMngCfgUploadStatus
OBJECT-TYPE
This parameter shows the current state of configuration backup files transfer from IDU to external FTP site. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3)
1.3.6.1.4.1.2281.10.4.2.3ProgressStatusread-onlymandatory
genEquipMngCfgDownloadStatus
OBJECT-TYPE
This parameter shows the current state of configuration backup files transfer from external FTP site to IDU. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3)
1.3.6.1.4.1.2281.10.4.2.4ProgressStatusread-onlymandatory
genEquipMngCfgCommand
OBJECT-TYPE
The command to be executed to backup/restore or upload/download configuration. If there is more then 1 slot in the NE, it is done for all the shelf.
1.3.6.1.4.1.2281.10.4.2.5INTEGER {no-operation(0), backup(1), restore(2), upload(3), download(4)}read-writemandatory
genEquipMngCfgEthernetSwitchStoreConfiguration
OBJECT-TYPE
This parameter writes the current configuration in the database. This command should be called after any change to the following sections: - Bridge configuration - WaySide configuration - Protection configuration.
1.3.6.1.4.1.2281.10.4.2.6OffOnread-writemandatory
genEquipMngCfgSetToDefaultKeepIp
OBJECT-TYPE
Set to Default configuration without changing the network parameters such as IP address, and subnet mask.
1.3.6.1.4.1.2281.10.4.2.7OffOnread-writemandatory
genEquipMngCfgCliScriptFileName
OBJECT-TYPE
The CLI script file name to be downloaded to the NE.
1.3.6.1.4.1.2281.10.4.2.8DisplayStringread-writemandatory
genEquipMngCfgGeneric
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.2.10
genEquipMngCfgBackupProgress
OBJECT-TYPE
An indication of the progress of the backup operation process.
1.3.6.1.4.1.2281.10.4.2.10.1INTEGERread-onlymandatory
genEquipMngCfgTimeToInstallation
OBJECT-TYPE
A counter indicating the time left until installation begins.
1.3.6.1.4.1.2281.10.4.2.10.2INTEGERread-onlymandatory
genEquipMngCfgFileTransferTable
OBJECT-TYPE
This table allows configuring the details of the external server where configuration should be located.
1.3.6.1.4.1.2281.10.4.2.11not-accessiblemandatory
genEquipMngCfgFileTransferEntry
OBJECT-TYPE
This table entry allows configuring the details of the external server where configuration should be located.
1.3.6.1.4.1.2281.10.4.2.11.1not-accessiblemandatory
genEquipMngCfgFileTransferIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.4.2.11.1.1INTEGERread-onlymandatory
genEquipMngCfgFileTransferProtocol
OBJECT-TYPE
The protocol to use to transfer the files between the system and an external computer.
1.3.6.1.4.1.2281.10.4.2.11.1.2FtpProtocolTyperead-writemandatory
genEquipMngCfgFileTransferUserName
OBJECT-TYPE
User name for access to the configuration files location.
1.3.6.1.4.1.2281.10.4.2.11.1.3DisplayStringread-writemandatory
genEquipMngCfgFileTransferPassword
OBJECT-TYPE
Password for access to the configuration files location.
1.3.6.1.4.1.2281.10.4.2.11.1.4DisplayStringread-writemandatory
genEquipMngCfgFileTransferAddress
OBJECT-TYPE
IP address of the computer where configuration files are to be transferred to/from.
1.3.6.1.4.1.2281.10.4.2.11.1.5IpAddressread-writemandatory
genEquipMngCfgFileTransferPath
OBJECT-TYPE
Location of the files in the external server.
1.3.6.1.4.1.2281.10.4.2.11.1.6DisplayStringread-writemandatory
genEquipMngCfgFileTransferFileName
OBJECT-TYPE
Name of the file in server.
1.3.6.1.4.1.2281.10.4.2.11.1.7DisplayStringread-writemandatory
genEquipMngCfgFileTransferIpv6Address
OBJECT-TYPE
IPv6 Server's address where files will be transferred to/from.
1.3.6.1.4.1.2281.10.4.2.11.1.8OCTET STRING (SIZE(0..16))read-writemandatory
genEquipMngCfgFileTransferStatusTable
OBJECT-TYPE
This table shows the status of the current configuration file transfer operation.
1.3.6.1.4.1.2281.10.4.2.12not-accessiblemandatory
genEquipMngCfgFileTransferStatusEntry
OBJECT-TYPE
This table entry shows the status of the current configuration file transfer operation.
1.3.6.1.4.1.2281.10.4.2.12.1not-accessiblemandatory
genEquipMngCfgFileTransferStatusIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.4.2.12.1.1INTEGERread-onlymandatory
genEquipMngCfgFileTransferStatusPercentageDone
OBJECT-TYPE
An indication of the progress of the process of the current file transfer operation.
1.3.6.1.4.1.2281.10.4.2.12.1.2INTEGERread-onlymandatory
genEquipMngCfgFileTransferStatusResult
OBJECT-TYPE
Status of the current file transfer operation.
1.3.6.1.4.1.2281.10.4.2.12.1.3FileTransferStatusread-writemandatory
genEquipMngCfgOperationTable
OBJECT-TYPE
This table allows creating, restoring, transferring and deleting configuration files.
1.3.6.1.4.1.2281.10.4.2.13not-accessiblemandatory
genEquipMngCfgOperationEntry
OBJECT-TYPE
This table entry allows creating, restoring, transferring and deleting configuration files.
1.3.6.1.4.1.2281.10.4.2.13.1not-accessiblemandatory
genEquipMngCfgOperationIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.4.2.13.1.1INTEGERread-onlymandatory
genEquipMngCfgOperationOperation
OBJECT-TYPE
The operation to be performed: backup, restore, delete, import, export.
1.3.6.1.4.1.2281.10.4.2.13.1.2CfgOperread-writemandatory
genEquipMngCfgOperationFileNumber
OBJECT-TYPE
A number from 1 to 3 to identify different restoration files.
1.3.6.1.4.1.2281.10.4.2.13.1.3INTEGER (1..3)read-writemandatory
genEquipMngCfgOperationTimedInstallation
OBJECT-TYPE
Whether to install immediately or following a countdown from a defined counter.
1.3.6.1.4.1.2281.10.4.2.13.1.4NoYesread-writemandatory
genEquipMngCfgOperationTimer
OBJECT-TYPE
A timer which determines the time to installation.
1.3.6.1.4.1.2281.10.4.2.13.1.5DisplayStringread-writemandatory
genEquipMngCfgOperationSlotNumber
OBJECT-TYPE
Slot number.
1.3.6.1.4.1.2281.10.4.2.13.1.6INTEGER (0..12)read-onlymandatory
genEquipMngCfgConfigurationFilesTable
OBJECT-TYPE
This table shows the status of the current configuration management operation.
1.3.6.1.4.1.2281.10.4.2.14not-accessiblemandatory
genEquipMngCfgConfigurationFilesEntry
OBJECT-TYPE
This table entry shows the status of the current configuration file transfer operation.
1.3.6.1.4.1.2281.10.4.2.14.1not-accessiblemandatory
genEquipMngCfgConfigurationFilesIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.4.2.14.1.1INTEGERread-onlymandatory
genEquipMngCfgConfigurationFilesFileNumber
OBJECT-TYPE
A number from 1 to 3 to identify different restoration files.
1.3.6.1.4.1.2281.10.4.2.14.1.2INTEGER (1..3)read-onlymandatory
genEquipMngCfgConfigurationFilesSystemType
OBJECT-TYPE
Type of product from which the backup file was created.
1.3.6.1.4.1.2281.10.4.2.14.1.3DisplayStringread-onlymandatory
genEquipMngCfgConfigurationFilesSWVersion
OBJECT-TYPE
Software version of the system from which the backup file was created.
1.3.6.1.4.1.2281.10.4.2.14.1.4DisplayStringread-onlymandatory
genEquipMngCfgConfigurationFilesTimeDate
OBJECT-TYPE
Time and date of creation of the file.
1.3.6.1.4.1.2281.10.4.2.14.1.5INTEGERread-onlymandatory
genEquipMngCfgConfigurationFilesSystemIP
OBJECT-TYPE
IP address of the unit from which the backup file was created.
1.3.6.1.4.1.2281.10.4.2.14.1.6IpAddressread-onlymandatory
genEquipMngCfgConfigurationFilesCardsConfigured
OBJECT-TYPE
Types of cards for which configuration values exist in the file; when restoring other card types will get default values.
1.3.6.1.4.1.2281.10.4.2.14.1.7DisplayStringread-onlymandatory
genEquipMngCfgConfigurationFilesSystemID
OBJECT-TYPE
System ID of the unit from which the backup file was created.
1.3.6.1.4.1.2281.10.4.2.14.1.8DisplayStringread-onlymandatory
genEquipMngCfgFileRestoreStatus
OBJECT-TYPE
Status of the operation of configuration restore from restore point.
1.3.6.1.4.1.2281.10.4.2.20FileRestoreStatusread-onlymandatory
genEquipMngCfgFileTransferStatus
OBJECT-TYPE
Status of the operation of configuration restore from restore point.
1.3.6.1.4.1.2281.10.4.2.21INTEGER {ready(0), download-started(1), verifying-download-files(2), download-in-progress(3), download-success(4), download-failure(5), all-components-exist(6), version-incompatible-with-system(7), incomplete-file-set(8), component-unsupported-by-hw(9), corrupt-sw-files(10), missing-dependencies(11), download-cancelled(12)}read-onlymandatory
genEquipMngFileTransfer
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.3
genEquipMngFileTransferFileTypeOper
OBJECT-TYPE
Operation for the file type to be transferred between the IDU and the external server. The options with prefix 'download' are files to be transferred from the server to the IDU. The options with prefix 'upload' are files to be transferred from the IDU to the server. To download IDU certificate, the OIDs genEquipSecurityCfgSecurityFileName, genEquipSecurityCfgSecurityFileFormat and genEquipSecurityCfgSecurityFileType should be set prior the operation of download security file. To upload CSR file, the OID genEquipSecurityCfgSecurityFileName should be set prior the operation of upload CSR file. To download CLI string, the OID genEquipMngCfgCliScriptFileName should be set prior the operation of download cli-script. To download warning banner file, the OID genEquipSecurityCfgWarningBannerFName should be set prior the operation of download warning-banner.
1.3.6.1.4.1.2281.10.4.3.1INTEGER {no-operation(0), download-configuration(1), download-certificate(2), download-warning-banner(3), download-cli-script(4), upload-configuration(5), upload-csr-file(6), upload-unit-info(7)}read-writemandatory
genEquipMngFileTransferDownloadConfigStatus
OBJECT-TYPE
The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper
1.3.6.1.4.1.2281.10.4.3.2ProgressStatusread-onlymandatory
genEquipMngFileTransferDownloadCertificateStatus
OBJECT-TYPE
The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper
1.3.6.1.4.1.2281.10.4.3.3ProgressStatusread-onlymandatory
genEquipMngFileTransferDownloadWarningBannerStatus
OBJECT-TYPE
The operation status of download warning banner, which is performed using genEquipMngFileTransferFileTypeOper
1.3.6.1.4.1.2281.10.4.3.4ProgressStatusread-onlymandatory
genEquipMngFileTransferDownloadCliScriptStatus
OBJECT-TYPE
TThe operation status of download cli script, which is performed using genEquipMngFileTransferFileTypeOper
1.3.6.1.4.1.2281.10.4.3.5ProgressStatusread-onlymandatory
genEquipMngFileTransferUploadConfigStatus
OBJECT-TYPE
The operation status of upload configuration, which is performed using genEquipMngFileTransferFileTypeOper
1.3.6.1.4.1.2281.10.4.3.6ProgressStatusread-onlymandatory
genEquipMngFileTransferUploadCSRStatus
OBJECT-TYPE
The operation status of upload CSR, which is performed using genEquipMngFileTransferFileTypeOper
1.3.6.1.4.1.2281.10.4.3.7ProgressStatusread-onlymandatory
genEquipMngFileTransferUploadUnitInfoStatus
OBJECT-TYPE
The operation status of upload unit info, which is performed using genEquipMngFileTransferFileTypeOper
1.3.6.1.4.1.2281.10.4.3.8ProgressStatusread-onlymandatory
genEquipMngUnitInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.4
genEquipMngUnitInfoGeneric
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.4.1
genEquipMngUnitInfoOperation
OBJECT-TYPE
Allows creating and exporting the unit information file.
1.3.6.1.4.1.2281.10.4.4.1.1CfgUnitInfoOperread-writemandatory
genEquipMngUnitInfoProgress
OBJECT-TYPE
Progress in percentage of the operation of the unit info file creation.
1.3.6.1.4.1.2281.10.4.4.1.2INTEGERread-onlymandatory
genEquipMngUnitInfoStatus
OBJECT-TYPE
Status of the operation of the unit info file creation.
1.3.6.1.4.1.2281.10.4.4.1.3ProgressStatusread-onlymandatory
genEquipMngUnitInfoFileTransferTable
OBJECT-TYPE
This table allows configuring the details of the external server which the unit info file will be expoted to.
1.3.6.1.4.1.2281.10.4.4.2not-accessiblemandatory
genEquipMngUnitInfoFileTransferEntry
OBJECT-TYPE
This table entry allows configuring the details of the external server which the unit info file will be expoted to.
1.3.6.1.4.1.2281.10.4.4.2.1not-accessiblemandatory
genEquipMngUnitInfoFileTransferIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.4.4.2.1.1INTEGERread-onlymandatory
genEquipMngUnitInfoFileTransferProtocol
OBJECT-TYPE
The protocol to use to transfer the files between the system and an external computer.
1.3.6.1.4.1.2281.10.4.4.2.1.2FtpProtocolTyperead-writemandatory
genEquipMngUnitInfoFileTransferUserName
OBJECT-TYPE
User name for access to the files location.
1.3.6.1.4.1.2281.10.4.4.2.1.3DisplayStringread-writemandatory
genEquipMngUnitInfoFileTransferPassword
OBJECT-TYPE
Password for access to the files location.
1.3.6.1.4.1.2281.10.4.4.2.1.4DisplayStringread-writemandatory
genEquipMngUnitInfoFileTransferAddress
OBJECT-TYPE
IP address of the computer where the files are to be transferred to/from.
1.3.6.1.4.1.2281.10.4.4.2.1.5IpAddressread-writemandatory
genEquipMngUnitInfoFileTransferPath
OBJECT-TYPE
Desired location of the unit info file in external server.
1.3.6.1.4.1.2281.10.4.4.2.1.6DisplayStringread-writemandatory
genEquipMngUnitInfoFileTransferFileName
OBJECT-TYPE
Name of the file in server.
1.3.6.1.4.1.2281.10.4.4.2.1.7DisplayStringread-writemandatory
genEquipMngUnitInfoFileTransferIpv6Address
OBJECT-TYPE
IPv6 Server's Address to which he file will be transferred.
1.3.6.1.4.1.2281.10.4.4.2.1.8OCTET STRING (SIZE(0..16))read-writemandatory
genEquipMngUnitInfoFileTransferStatusTable
OBJECT-TYPE
This table shows the status of the current configuration file transfer operation.
1.3.6.1.4.1.2281.10.4.4.3not-accessiblemandatory
genEquipMngUnitInfoFileTransferStatusEntry
OBJECT-TYPE
This table entry shows the status of the current configuration file transfer operation.
1.3.6.1.4.1.2281.10.4.4.3.1not-accessiblemandatory
genEquipMngUnitInfoFileTransferStatusIndex
OBJECT-TYPE
Index of the table.
1.3.6.1.4.1.2281.10.4.4.3.1.1INTEGERread-onlymandatory
genEquipMngUnitInfoFileTransferStatusPercentageDone
OBJECT-TYPE
An indication of the progress of the process of the current file transfer operation.
1.3.6.1.4.1.2281.10.4.4.3.1.2INTEGERread-onlymandatory
genEquipMngUnitInfoFileTransferStatusResult
OBJECT-TYPE
Status of the current file transfer operation.
1.3.6.1.4.1.2281.10.4.4.3.1.3ProgressStatusread-writemandatory
genEquipMngCli
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.4.5
genEquipMngCliScriptOperation
OBJECT-TYPE
Allows importing, showing, deleting and executing CLI scripts.
1.3.6.1.4.1.2281.10.4.5.1INTEGER {no-operation(0), import(1), delete(2), show(3), execute(4)}read-writemandatory
genEquipMngCliScriptOperationStatus
OBJECT-TYPE
Allows importing, showing, deleting and executing CLI scripts.
1.3.6.1.4.1.2281.10.4.5.2INTEGER {ready(0), executing(1), failed(2), success(3)}read-onlymandatory
genEquipDiagAndMaintenance
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.10
genEquipDiagAndMaintenanceRadioLoopbackTimeout
OBJECT-TYPE
Radio loopback timeout, in minutes. 0 means no timer.
1.3.6.1.4.1.2281.10.10.1INTEGER (0..1440)read-writemandatory
genEquipDiagAndMaintenanceLineLoopbackTimeout
OBJECT-TYPE
Line loopback timeout, in minutes. 0 means no timer.
1.3.6.1.4.1.2281.10.10.2INTEGER (0..1440)read-writemandatory
genEquipDiagAndMaintenanceSDHLoopbackTimeout
OBJECT-TYPE
STM-1/OC-3 line loopback timeout, in minutes. 0 means no timer.
1.3.6.1.4.1.2281.10.10.3INTEGER (0..1440)read-writemandatory
genEquipSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11
genEquipSecurityConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.1
genEquipSecurityCfgUploadPublicKeyStatus
OBJECT-TYPE
The upload status of the Public key.
1.3.6.1.4.1.2281.10.11.1.1ProgressStatusread-onlymandatory
genEquipSecurityCfgDownloadSecurityStatus
OBJECT-TYPE
The download status of the digital certificate.
1.3.6.1.4.1.2281.10.11.1.2ProgressStatusread-onlymandatory
genEquipSecurityCfgSecurityFileName
OBJECT-TYPE
The certificate file name to be downloaded.
1.3.6.1.4.1.2281.10.11.1.3DisplayStringread-writemandatory
genEquipSecurityCfgSecurityFileType
OBJECT-TYPE
The digital certificate file type.
1.3.6.1.4.1.2281.10.11.1.4INTEGER {target-certificate(0), target-ca-certificate(1)}read-writemandatory
genEquipSecurityCfgSecurityFileFormat
OBJECT-TYPE
The certificate file format. .pem - (Privacy Enhanced Mail) Base64 encoded DER certificate, enclosed between -----BEGIN CERTIFICATE----- and -----END CERTIFICATE----- .der is a subset of Basic Encoding Rules (BER) providing for exactly one way to encode an ASN.1 value.
1.3.6.1.4.1.2281.10.11.1.5INTEGER {pem(0), der(1)}read-writemandatory
genEquipSecurityCfgSecurityWebCertificateAdmin
OBJECT-TYPE
The admin state of the certificate.
1.3.6.1.4.1.2281.10.11.1.6EnableDisableread-writemandatory
genEquipSecurityCfgWebProtocol
OBJECT-TYPE
Use unsecure http or secure https.
1.3.6.1.4.1.2281.10.11.1.7INTEGER {http(1), https(2)}read-writemandatory
genEquipSecurityCfgTelnetAdmin
OBJECT-TYPE
Enable or disable the Telnet server on the NE.
1.3.6.1.4.1.2281.10.11.1.8EnableDisableread-writemandatory
genEquipSecurityCfgAutoLogOutPeriod
OBJECT-TYPE
Auto logout period for CLI or web users, (1-60 seconds)
1.3.6.1.4.1.2281.10.11.1.9INTEGER (1..60)read-writemandatory
genEquipSecurityXFTP
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.1.10
genEquipSecurityXFTPHostIP
OBJECT-TYPE
The FTP/SFTP host IP address.
1.3.6.1.4.1.2281.10.11.1.10.1IpAddressread-writemandatory
genEquipSecurityXFTPHostPath
OBJECT-TYPE
The FTP/SFTP host directory path.
1.3.6.1.4.1.2281.10.11.1.10.2DisplayStringread-writemandatory
genEquipSecurityXFTPProtocol
OBJECT-TYPE
Either FTP or SFTP to be used.
1.3.6.1.4.1.2281.10.11.1.10.3INTEGER {ftp(0), sftp(1)}read-writemandatory
genEquipSecurityXFTPUserName
OBJECT-TYPE
FTP User name.
1.3.6.1.4.1.2281.10.11.1.10.4DisplayStringread-writemandatory
genEquipSecurityXFTPPassword
OBJECT-TYPE
FTP User password.
1.3.6.1.4.1.2281.10.11.1.10.5DisplayStringread-writemandatory
genEquipSecurityCfgPassFirstLoginChange
OBJECT-TYPE
Define whether user's first login will be required to change it password or not
1.3.6.1.4.1.2281.10.11.1.11NoYesread-writemandatory
genEquipSecurityCfgCSRCreation
OBJECT-TYPE
This command create CSR file of the element. The file could be uploaded to external server by using the genEquipMngFileTransferFileTypeOper OID. The command syntax should be: <country_name> <state> <locality_name> <organization_name> <organization_unit_name> <common_name> <email_addr>. All the fields must be referred, for skipping on any field, use 'symbol instead'.
1.3.6.1.4.1.2281.10.11.1.12DisplayString (SIZE(0..512))read-writemandatory
genEquipSecurityCfgWarningBannerFName
OBJECT-TYPE
The Warning Banner file name to be downloaded to the NE.
1.3.6.1.4.1.2281.10.11.1.13DisplayStringread-writemandatory
genEquipSecurityConfigurationRadius
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.1.14
genEquipSecurityConfigurationRadiusAdmin
OBJECT-TYPE
this parameter configures the admin state of the RADIUS protocol; when enabled, all users will be logged in via RADIUS server
1.3.6.1.4.1.2281.10.11.1.14.1EnableDisableread-writemandatory
genEquipSecurityConfigurationRadiusServerIP
OBJECT-TYPE
this parameter configures the IP address of the RADIUS server
1.3.6.1.4.1.2281.10.11.1.14.2IpAddressread-writemandatory
genEquipSecurityConfigurationRadiusSecret
OBJECT-TYPE
this parameter configures the common secret between the agent and the RADIUS server
1.3.6.1.4.1.2281.10.11.1.14.3DisplayStringread-writemandatory
genEquipSecurityConfigurationRadiusPort
OBJECT-TYPE
this parameter configures the IP address of UDP port used for the RADIUS protocol
1.3.6.1.4.1.2281.10.11.1.14.4INTEGERread-writemandatory
genEquipSecurityConfigurationRadiusRetries
OBJECT-TYPE
this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable
1.3.6.1.4.1.2281.10.11.1.14.5INTEGER (1..10)read-writemandatory
genEquipSecurityConfigurationRadiusTimeout
OBJECT-TYPE
this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable
1.3.6.1.4.1.2281.10.11.1.14.6INTEGER (3..30)read-writemandatory
genEquipSecurityUsersAndGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.2
genEquipSecurityUsersTable
OBJECT-TYPE
User table.
1.3.6.1.4.1.2281.10.11.2.1not-accessiblemandatory
genEquipSecurityUsersEntry
OBJECT-TYPE
User table.
1.3.6.1.4.1.2281.10.11.2.1.1not-accessiblemandatory
genEquipSecurityUsersName
OBJECT-TYPE
This value is the user name.
1.3.6.1.4.1.2281.10.11.2.1.1.1DisplayStringread-writemandatory
genEquipSecurityUsersPasswd
OBJECT-TYPE
This value is the user's password. It is used only in the creation phase. To change the password, you need to use the genEquipSecurityUsersAndGroupsChangePasswd command
1.3.6.1.4.1.2281.10.11.2.1.1.2DisplayStringread-writemandatory
genEquipSecurityUsersPriviledge
OBJECT-TYPE
This value is the users privilege.
1.3.6.1.4.1.2281.10.11.2.1.1.3INTEGER {no-privilege-lvl(-1), viewer-user-lvl(0), operator-user-lvl(1), admin-user-lvl(2), tech-user-lvl(3)}read-writemandatory
genEquipSecurityUsersPasswdAging
OBJECT-TYPE
This value is the user's password aging time (in days). When response is 99999 the meaning is No Aging.
1.3.6.1.4.1.2281.10.11.2.1.1.4INTEGER (0..90)read-writemandatory
genEquipSecurityUsersExprDate
OBJECT-TYPE
This value is the user's password expiration date. The value is presented in time_t format. When response is -1 the meaning is Never Expired.
1.3.6.1.4.1.2281.10.11.2.1.1.5INTEGERread-writemandatory
genEquipSecurityUsersLastLogin
OBJECT-TYPE
This value is the user last login date. Time in seconds since January 1, 1970 00:00 UTC.
1.3.6.1.4.1.2281.10.11.2.1.1.6INTEGERread-onlymandatory
genEquipSecurityUsersRowStatus
OBJECT-TYPE
This value is the status of the entry.
1.3.6.1.4.1.2281.10.11.2.1.1.30RowStatusread-writemandatory
genEquipSecurityUsersAndGroupsChangePasswd
OBJECT-TYPE
This command changes the user password at the command line. It takes all arguments as the command. It cannot be done through the table since it needs to provide the old password as well. The format is: '<username> <old-password> <new-password>' seperated with spaces.
1.3.6.1.4.1.2281.10.11.2.2DisplayStringread-writemandatory
genEquipSecuritySNMP
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.3
genEquipSecuritySNMPReadCommunity
OBJECT-TYPE
This is the SNMP Read community string
1.3.6.1.4.1.2281.10.11.3.1DisplayStringread-writemandatory
genEquipSecuritySNMPWriteCommunity
OBJECT-TYPE
This is the SNMP Write community string
1.3.6.1.4.1.2281.10.11.3.2DisplayStringread-writemandatory
genEquipSecuritySNMPV3
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.3.10
genEquipSecuritySNMPV3AuthTable
OBJECT-TYPE
Security General File Transfer Configuration Table.
1.3.6.1.4.1.2281.10.11.3.10.1not-accessiblemandatory
genEquipSecuritySNMPV3AuthEntry
OBJECT-TYPE
Security General File Transfer Configuration Table
1.3.6.1.4.1.2281.10.11.3.10.1.1not-accessiblemandatory
genEquipSecuritySNMPV3AuthUserName
OBJECT-TYPE
This value is the V3 user name and the index of file v3 Authentication table.
1.3.6.1.4.1.2281.10.11.3.10.1.1.1DisplayStringread-writemandatory
genEquipSecuritySNMPV3AuthPassword
OBJECT-TYPE
This value is file V3 user authentication password.
1.3.6.1.4.1.2281.10.11.3.10.1.1.2DisplayStringread-writemandatory
genEquipSecuritySNMPV3AuthSecurityMode
OBJECT-TYPE
This is the user's security mode
1.3.6.1.4.1.2281.10.11.3.10.1.1.3INTEGER {noAuthNoPriv(1), authNoPriv(2), authPriv(3)}read-writemandatory
genEquipSecuritySNMPV3AuthEncryptionMode
OBJECT-TYPE
This is the V3 encryption mode.
1.3.6.1.4.1.2281.10.11.3.10.1.1.4INTEGER {none(1), des(2), aes(3)}read-writemandatory
genEquipSecuritySNMPV3AuthAuthenticationAlgorithm
OBJECT-TYPE
This is the V3 authentication algorithm.
1.3.6.1.4.1.2281.10.11.3.10.1.1.5INTEGER {none(1), sha(2), md5(3)}read-writemandatory
genEquipSecuritySNMPV3AuthAccessMode
OBJECT-TYPE
This is the V3 user access mode.
1.3.6.1.4.1.2281.10.11.3.10.1.1.6INTEGER {readWrite(1), readOnly(2)}read-writemandatory
genEquipSecuritySNMPV3AuthRowStatus
OBJECT-TYPE
This is the row status.
1.3.6.1.4.1.2281.10.11.3.10.1.1.30RowStatusread-writemandatory
genEquipSecurityGen
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.4
genEquipSecurityGenFTConfigTable
OBJECT-TYPE
Security General File Transfer Configuration Table.
1.3.6.1.4.1.2281.10.11.4.1not-accessiblemandatory
genEquipSecurityGenFTConfigEntry
OBJECT-TYPE
Security General File Transfer Configuration Table
1.3.6.1.4.1.2281.10.11.4.1.1not-accessiblemandatory
genEquipSecurityGenFTConfigIndex
OBJECT-TYPE
This value is the index of file transfer table.
1.3.6.1.4.1.2281.10.11.4.1.1.1INTEGERread-writemandatory
genEquipSecurityGenFTConfigProtocol
OBJECT-TYPE
This value is file transfer protocol.
1.3.6.1.4.1.2281.10.11.4.1.1.2INTEGER {ftp(0), sftp(1)}read-writemandatory
genEquipSecurityGenFTConfigUsername
OBJECT-TYPE
This value is the user's name
1.3.6.1.4.1.2281.10.11.4.1.1.3DisplayStringread-writemandatory
genEquipSecurityGenFTConfigPassword
OBJECT-TYPE
This value is the users password.
1.3.6.1.4.1.2281.10.11.4.1.1.4DisplayStringread-writemandatory
genEquipSecurityGenFTConfigAddress
OBJECT-TYPE
This value is the server IP.
1.3.6.1.4.1.2281.10.11.4.1.1.5IpAddressread-writemandatory
genEquipSecurityGenFTConfigFilePath
OBJECT-TYPE
This value is file path.
1.3.6.1.4.1.2281.10.11.4.1.1.6DisplayStringread-writemandatory
genEquipSecurityGenFTConfigFileName
OBJECT-TYPE
This value is the file name.
1.3.6.1.4.1.2281.10.11.4.1.1.7DisplayStringread-onlymandatory
genEquipSecurityGenFTConfigIpV6Address
OBJECT-TYPE
IP address v6 of the server, where the file are to be transferred to/from.
1.3.6.1.4.1.2281.10.11.4.1.1.8OCTET STRING (SIZE(0..16))read-writemandatory
genEquipSecurityGenFTStatusTable
OBJECT-TYPE
Security General File Transfer Status Table.
1.3.6.1.4.1.2281.10.11.4.2not-accessiblemandatory
genEquipSecurityGenFTStatusEntry
OBJECT-TYPE
Security General File Transfer Status Table.
1.3.6.1.4.1.2281.10.11.4.2.1not-accessiblemandatory
genEquipSecurityGenFTStatusIndex
OBJECT-TYPE
This value is the index of file transfer status table.
1.3.6.1.4.1.2281.10.11.4.2.1.1INTEGERread-writemandatory
genEquipSecurityGenFTStatusStatus
OBJECT-TYPE
File transfer operation status.
1.3.6.1.4.1.2281.10.11.4.2.1.2FTStatusread-onlymandatory
genEquipSecurityGenFTStatusProgress
OBJECT-TYPE
Process prcentage
1.3.6.1.4.1.2281.10.11.4.2.1.3INTEGERread-onlymandatory
genEquipSecurityGenFTOperations
OBJECT-TYPE
File transfer operations
1.3.6.1.4.1.2281.10.11.4.11INTEGER {none(0), upload-security-log(1)}read-writemandatory
genEquipSecurityGenImportExportAdmin
OBJECT-TYPE
Admin for import or export security settings
1.3.6.1.4.1.2281.10.11.4.12EnableDisableread-writemandatory
genEquipSecurityAccessControl
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.5
genEquipSecurityAccessControlProfileTable
OBJECT-TYPE
Security Access Control Profile Table.
1.3.6.1.4.1.2281.10.11.5.1not-accessiblemandatory
genEquipSecurityAccessControlProfileEntry
OBJECT-TYPE
Security Access Control Profile Table Entry
1.3.6.1.4.1.2281.10.11.5.1.1not-accessiblemandatory
genEquipSecurityAccessControlProfileName
OBJECT-TYPE
User profile name.
1.3.6.1.4.1.2281.10.11.5.1.1.1DisplayStringread-writemandatory
genEquipSecurityAccessControlProfileChannel
OBJECT-TYPE
Permitted access channels.
1.3.6.1.4.1.2281.10.11.5.1.1.2INTEGER (0..127)read-writemandatory
genEquipSecurityAccessControlProfileUsed
OBJECT-TYPE
Indicate whether the profile in used
1.3.6.1.4.1.2281.10.11.5.1.1.3INTEGERread-onlymandatory
genEquipSecurityAccessControlProfileSecurityWrite
OBJECT-TYPE
Security functional write access level.
1.3.6.1.4.1.2281.10.11.5.1.1.4RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileSecurityRead
OBJECT-TYPE
Security functional read access level.
1.3.6.1.4.1.2281.10.11.5.1.1.5RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileMngWrite
OBJECT-TYPE
Management functional write access level.
1.3.6.1.4.1.2281.10.11.5.1.1.6RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileMngRead
OBJECT-TYPE
Management functional read access level.
1.3.6.1.4.1.2281.10.11.5.1.1.7RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileRadioWrite
OBJECT-TYPE
Radio functional write access level.
1.3.6.1.4.1.2281.10.11.5.1.1.8RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileRadioRead
OBJECT-TYPE
Radio functional read access level.
1.3.6.1.4.1.2281.10.11.5.1.1.9RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileTDMWrite
OBJECT-TYPE
TDM functional write access level.
1.3.6.1.4.1.2281.10.11.5.1.1.10RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileTDMRead
OBJECT-TYPE
TDM functional read access level.
1.3.6.1.4.1.2281.10.11.5.1.1.11RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileEthWrite
OBJECT-TYPE
Ether functional write access level.
1.3.6.1.4.1.2281.10.11.5.1.1.12RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileEthRead
OBJECT-TYPE
Ether functional read access level.
1.3.6.1.4.1.2281.10.11.5.1.1.13RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileSyncWrite
OBJECT-TYPE
Sync functional write access level.
1.3.6.1.4.1.2281.10.11.5.1.1.14RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileSyncRead
OBJECT-TYPE
Sync functional read access level.
1.3.6.1.4.1.2281.10.11.5.1.1.15RbacAccessLevelread-writemandatory
genEquipSecurityAccessControlProfileRowStatus
OBJECT-TYPE
Row Status for Profile table.
1.3.6.1.4.1.2281.10.11.5.1.1.30RowStatusread-writemandatory
genEquipSecurityAccessControlUserTable
OBJECT-TYPE
Security Access Control User Table.
1.3.6.1.4.1.2281.10.11.5.2not-accessiblemandatory
genEquipSecurityAccessControlUserEntry
OBJECT-TYPE
Security Access Control User Table Entry
1.3.6.1.4.1.2281.10.11.5.2.1not-accessiblemandatory
genEquipSecurityAccessControlUserName
OBJECT-TYPE
User name.
1.3.6.1.4.1.2281.10.11.5.2.1.1DisplayStringread-writemandatory
genEquipSecurityAccessControlUserProfile
OBJECT-TYPE
User's profile name.
1.3.6.1.4.1.2281.10.11.5.2.1.2DisplayStringread-writemandatory
genEquipSecurityAccessControlUserPassword
OBJECT-TYPE
User's password
1.3.6.1.4.1.2281.10.11.5.2.1.3DisplayStringread-writemandatory
genEquipSecurityAccessControlUserExpired
OBJECT-TYPE
expired date of user account.
1.3.6.1.4.1.2281.10.11.5.2.1.4INTEGERread-writemandatory
genEquipSecurityAccessControlUserBlock
OBJECT-TYPE
Block user account.
1.3.6.1.4.1.2281.10.11.5.2.1.5NoYesread-writemandatory
genEquipSecurityAccessControlUserLastLogout
OBJECT-TYPE
Current login indication.
1.3.6.1.4.1.2281.10.11.5.2.1.6INTEGERread-writemandatory
genEquipSecurityAccessControlUserLoggedIn
OBJECT-TYPE
Current login indication.
1.3.6.1.4.1.2281.10.11.5.2.1.7NoYesread-writemandatory
genEquipSecurityAccessControlUserRowStatus
OBJECT-TYPE
Row Status for users table.
1.3.6.1.4.1.2281.10.11.5.2.1.30RowStatusread-writemandatory
genEquipSecurityAccessControlPassEnforceStrength
OBJECT-TYPE
Enforce strength password.
1.3.6.1.4.1.2281.10.11.5.11NoYesread-writemandatory
genEquipSecurityAccessControlPassFirstLoginChange
OBJECT-TYPE
Password change for first login.
1.3.6.1.4.1.2281.10.11.5.12NoYesread-writemandatory
genEquipSecurityAccessControlPassAging
OBJECT-TYPE
Password aging.
1.3.6.1.4.1.2281.10.11.5.13NoYesread-writemandatory
genEquipSecurityAccessControlFailureLoginAttempt
OBJECT-TYPE
Failure login threshold blocking user account.
1.3.6.1.4.1.2281.10.11.5.14INTEGER (1..10)read-writemandatory
genEquipSecurityAccessControlBlockFailureLoginPeriod
OBJECT-TYPE
Blocking period due to failure login.
1.3.6.1.4.1.2281.10.11.5.15INTEGER (0..60)read-writemandatory
genEquipSecurityAccessControlBlockunusedAccount
OBJECT-TYPE
Period time for block unused account.
1.3.6.1.4.1.2281.10.11.5.16INTEGER (0..90)read-writemandatory
genEquipSecurityAccessControlBlockRootRemote
OBJECT-TYPE
Root remote access.
1.3.6.1.4.1.2281.10.11.5.17NoYesread-writemandatory
genEquipSecurityProtocolsControl
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.6
genEquipSecurityProtocolsControlAutoSessionTimeOut
OBJECT-TYPE
Logout session after incativity timeout.
1.3.6.1.4.1.2281.10.11.6.1INTEGER (1..60)read-writemandatory
genEquipSecurityProtocolsControlSNMPAdmin
OBJECT-TYPE
SNMP Admin.
1.3.6.1.4.1.2281.10.11.6.2EnableDisableread-writemandatory
genEquipSecurityProtocolsControlSNMPOperStatus
OBJECT-TYPE
SNMP Operational Status.
1.3.6.1.4.1.2281.10.11.6.3DownUpread-onlymandatory
genEquipSecurityProtocolsControlSNMPTrapVersion
OBJECT-TYPE
SNMP Trap version.
1.3.6.1.4.1.2281.10.11.6.4INTEGER {v1(1), v2(2), v3(3)}read-writemandatory
genEquipSecurityProtocolsControlSNMPMIBVersion
OBJECT-TYPE
SNMP MIB version.
1.3.6.1.4.1.2281.10.11.6.5DisplayStringread-onlymandatory
genEquipSecurityProtocolsControlSNMPV1V2Blocked
OBJECT-TYPE
SNMP V1V2 is blocked.
1.3.6.1.4.1.2281.10.11.6.6NoYesread-writemandatory
genEquipSecurityProtocolsControlHTTPAdmin
OBJECT-TYPE
HTTP Admin.
1.3.6.1.4.1.2281.10.11.6.7EnableDisableread-writemandatory
genEquipSecurityMonitorAndLogs
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.7
genEquipSecurityConfigLogUploadConfigTable
OBJECT-TYPE
Config Log Upload Configuration.
1.3.6.1.4.1.2281.10.11.7.1not-accessiblemandatory
genEquipSecurityConfigLogUploadConfigEntry
OBJECT-TYPE
Config Log Upload Configuration Table Entry
1.3.6.1.4.1.2281.10.11.7.1.1not-accessiblemandatory
genEquipSecurityConfigLogUploadConfigIndex
OBJECT-TYPE
Config Log Upload Configuration index. has Fixed value of 1
1.3.6.1.4.1.2281.10.11.7.1.1.1INTEGERread-onlymandatory
genEquipSecurityConfigLogUploadConfigProtocol
OBJECT-TYPE
Config Log Upload Configuration Protocol.
1.3.6.1.4.1.2281.10.11.7.1.1.2FtpProtocolTyperead-writemandatory
genEquipSecurityConfigLogUploadConfigUsername
OBJECT-TYPE
Config Log Upload Username
1.3.6.1.4.1.2281.10.11.7.1.1.3DisplayStringread-writemandatory
genEquipSecurityConfigLogUploadConfigPassword
OBJECT-TYPE
Config Log Upload Configuration Password.
1.3.6.1.4.1.2281.10.11.7.1.1.4DisplayStringread-writemandatory
genEquipSecurityConfigLogUploadConfigIpaddress
OBJECT-TYPE
Config Log Upload Configuration ip address (Ipv4).
1.3.6.1.4.1.2281.10.11.7.1.1.5IpAddressread-writemandatory
genEquipSecurityConfigLogUploadConfigPath
OBJECT-TYPE
Config Log Upload Configuration Path.
1.3.6.1.4.1.2281.10.11.7.1.1.6DisplayStringread-writemandatory
genEquipSecurityConfigLogUploadConfigFilename
OBJECT-TYPE
Config Log Upload Configuration Filename.
1.3.6.1.4.1.2281.10.11.7.1.1.7DisplayStringread-writemandatory
genEquipSecurityConfigLogUploadConfigIpV6Address
OBJECT-TYPE
Config Log Upload Configuration ip address (Ipv6).
1.3.6.1.4.1.2281.10.11.7.1.1.8OCTET STRING (SIZE(0..16))read-writemandatory
genEquipSecurityConfigLogUploadStatusTable
OBJECT-TYPE
Config Log Upload Status.
1.3.6.1.4.1.2281.10.11.7.2not-accessiblemandatory
genEquipSecurityConfigLogUploadStatusEntry
OBJECT-TYPE
Config Log Upload Status Table Entry
1.3.6.1.4.1.2281.10.11.7.2.1not-accessiblemandatory
genEquipSecurityConfigLogUploadStatusIndex
OBJECT-TYPE
Config Log Upload Status index. has Fixed value of 1
1.3.6.1.4.1.2281.10.11.7.2.1.1INTEGERread-onlymandatory
genEquipSecurityConfigLogUploadStatusStatus
OBJECT-TYPE
Config Log Upload Configuration Protocol.
1.3.6.1.4.1.2281.10.11.7.2.1.2FileTransferStatusread-writemandatory
genEquipSecurityConfigLogUploadStatusPrcntg
OBJECT-TYPE
Progress status in percentage.
1.3.6.1.4.1.2281.10.11.7.2.1.3INTEGERread-onlymandatory
genEquipSecurityConfigLogUpload
OBJECT-TYPE
Configuration Log Upload.
1.3.6.1.4.1.2281.10.11.7.10INTEGER {none(0), upload-security-log(1)}read-writemandatory
genEquipSecurityRadiusServer
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.8
genEquipSecurityRadiusServerConfigurationTable
OBJECT-TYPE
Radius configuration table.
1.3.6.1.4.1.2281.10.11.8.1not-accessiblemandatory
genEquipSecurityRadiusServerConfigurationEntry
OBJECT-TYPE
Radius configuration table Entry
1.3.6.1.4.1.2281.10.11.8.1.1not-accessiblemandatory
genEquipSecurityAccessControlRadiusServerId
OBJECT-TYPE
Server id: 1 - primary, 2-secondary
1.3.6.1.4.1.2281.10.11.8.1.1.1INTEGERread-onlymandatory
genEquipSecurityAccessControlRadiusServerIpV4Address
OBJECT-TYPE
The IP address of the RADIUS Server.
1.3.6.1.4.1.2281.10.11.8.1.1.2IpAddressread-writemandatory
genEquipSecurityAccessControlRadiusServerIpv6Address
OBJECT-TYPE
The IP address of the RADIUS Server
1.3.6.1.4.1.2281.10.11.8.1.1.3OCTET STRING (SIZE(0..16))read-writemandatory
genEquipSecurityAccessControlRadiusServerPort
OBJECT-TYPE
The port ID of the RADIUS protocol in the RADIUS Server.
1.3.6.1.4.1.2281.10.11.8.1.1.4INTEGERread-writemandatory
genEquipSecurityAccessControlRadiusServerRetries
OBJECT-TYPE
The number of times the agent will retry to communicate with the selected RADIUS server before declaring the server to be not reachable.
1.3.6.1.4.1.2281.10.11.8.1.1.5INTEGERread-writemandatory
genEquipSecurityAccessControlRadiusServerTimeout
OBJECT-TYPE
The timeout that the agent will wait in each communication with the selected RADIUS server before retrying if no response is received.
1.3.6.1.4.1.2281.10.11.8.1.1.6INTEGERread-writemandatory
genEquipSecurityAccessControlRadiusServerSharedSecret
OBJECT-TYPE
The shared secret of the Radius Server.
1.3.6.1.4.1.2281.10.11.8.1.1.7OCTET STRINGread-writemandatory
genEquipSecurityAccessControlRadiusServerConnectivityStatus
OBJECT-TYPE
The connectivity status of the RADIUS server in the last login tried.
1.3.6.1.4.1.2281.10.11.8.1.1.8EnableDisableread-onlymandatory
genEquipSecurityAccessControlRadiusUsersTable
OBJECT-TYPE
Radius privilege table.
1.3.6.1.4.1.2281.10.11.8.2not-accessiblemandatory
genEquipSecurityAccessControlRadiusUsersEntry
OBJECT-TYPE
Radius privilege table Entry
1.3.6.1.4.1.2281.10.11.8.2.1not-accessiblemandatory
genEquipSecurityAccessControlRadiusUsersId
OBJECT-TYPE
User ID
1.3.6.1.4.1.2281.10.11.8.2.1.1DisplayStringread-onlymandatory
genEquipSecurityAccessControlRadiusUserInstances
OBJECT-TYPE
A number of the same connected users.
1.3.6.1.4.1.2281.10.11.8.2.1.2INTEGERread-onlymandatory
genEquipSecurityAccessControlRadiusUsersAccessChannels
OBJECT-TYPE
A bits stands for each access channel: serial-0, telnet-1, ssh-2, web-3
1.3.6.1.4.1.2281.10.11.8.2.1.3INTEGERread-onlymandatory
genEquipSecurityAccessControlRadiusUsersEthReadLevel
OBJECT-TYPE
The RADIUS permitted access for Ethernet Read Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.4RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersEthWriteLevel
OBJECT-TYPE
The RADIUS permitted access for Ethernet Write Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.5RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersMngReadLevel
OBJECT-TYPE
The RADIUS permitted access for MNG Read Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.6RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersMngWriteLevel
OBJECT-TYPE
The RADIUS permitted access for MNG Write Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.7RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersRadioReadLevel
OBJECT-TYPE
The RADIUS permitted access for Radio Read Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.8RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersRadioWriteLevel
OBJECT-TYPE
The RADIUS permitted access for Radio Write Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.9RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersSecurityReadLevel
OBJECT-TYPE
The RADIUS permitted access for Security Read Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.10RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersSecurityWriteLevel
OBJECT-TYPE
The RADIUS permitted access for Security Write Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.11RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersSyncReadLevel
OBJECT-TYPE
The RADIUS permitted access for Sync Read Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.12RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersSyncWriteLevel
OBJECT-TYPE
The RADIUS permitted access for Sync Write Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.13RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersTdmReadLevel
OBJECT-TYPE
The RADIUS permitted access for TDM Read Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.14RaduisAcceaaLevelread-onlymandatory
genEquipSecurityAccessControlRadiusUsersTdmWriteLevel
OBJECT-TYPE
The RADIUS permitted access for TDM Write Level functional group.
1.3.6.1.4.1.2281.10.11.8.2.1.15RaduisAcceaaLevelread-onlymandatory
genEquipSecurityRadiusAdmin
OBJECT-TYPE
Control working withRadius Server.
1.3.6.1.4.1.2281.10.11.8.10EnableDisableread-writemandatory
genEquipSecurityCertificate
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.9
genEquipSecurityCsrCertificateFileTransferSet
OBJECT-TYPE
CSR generate and Upload.
1.3.6.1.4.1.2281.10.11.9.1CsrCertificateFTStateread-writemandatory
genEquipSecurityCsrStatus
OBJECT-TYPE
Status of last geneate and upload.
1.3.6.1.4.1.2281.10.11.9.2FTStatusread-onlymandatory
genEquipSecurityCsrCertificateGenerateAndUploadPercentage
OBJECT-TYPE
Percentage of last generate CSR and upload.
1.3.6.1.4.1.2281.10.11.9.3INTEGERread-onlymandatory
genEquipSecurityCertificateInstallSet
OBJECT-TYPE
Certificate Install.
1.3.6.1.4.1.2281.10.11.9.4OffOnread-writemandatory
genEquipSecurityCertificateDownloadStatus
OBJECT-TYPE
tatus of last certificate download.
1.3.6.1.4.1.2281.10.11.9.5FTStatusread-onlymandatory
genEquipSecurityCertificateDownloadPercentage
OBJECT-TYPE
Percentage of certificate download operation.
1.3.6.1.4.1.2281.10.11.9.6INTEGERread-onlymandatory
genEquipSecurityCsrAttributesTable
OBJECT-TYPE
CSR Attributes Table.
1.3.6.1.4.1.2281.10.11.9.10not-accessiblemandatory
genEquipSecurityCsrAttributesEntry
OBJECT-TYPE
CSR Attributes Table Entry
1.3.6.1.4.1.2281.10.11.9.10.1not-accessiblemandatory
genEquipSecurityCsrAttributesIndex
OBJECT-TYPE
Index to table, constant 1
1.3.6.1.4.1.2281.10.11.9.10.1.1INTEGERread-onlymandatory
genEquipSecurityCsrAttributesCountry
OBJECT-TYPE
The two-letter ISO abbreviation for your country (ISO3166-1) (example US).
1.3.6.1.4.1.2281.10.11.9.10.1.2DisplayStringread-writemandatory
genEquipSecurityCsrAttributesLocality
OBJECT-TYPE
The city where your organization is legally located
1.3.6.1.4.1.2281.10.11.9.10.1.3DisplayStringread-writemandatory
genEquipSecurityCsrAttributesState
OBJECT-TYPE
The state or province where your organization is legally located. Can not be abbreviated.
1.3.6.1.4.1.2281.10.11.9.10.1.4DisplayStringread-writemandatory
genEquipSecurityCsrAttributesOrganization
OBJECT-TYPE
The exact legal name of your organization. Do not abbreviate your organization name.
1.3.6.1.4.1.2281.10.11.9.10.1.5DisplayStringread-writemandatory
genEquipSecurityCsrAttributesOu
OBJECT-TYPE
Section of the organization. Example: Marketing.
1.3.6.1.4.1.2281.10.11.9.10.1.6DisplayStringread-writemandatory
genEquipSecurityCsrAttributesCommonName
OBJECT-TYPE
The fully qualified domain name for your web server. This must be an exact match.
1.3.6.1.4.1.2281.10.11.9.10.1.7DisplayStringread-writemandatory
genEquipSecurityCsrAttributesEmail
OBJECT-TYPE
An email address used to contact your organization.
1.3.6.1.4.1.2281.10.11.9.10.1.8DisplayStringread-onlymandatory
genEquipSecurityCsrAttributesFileFormat
OBJECT-TYPE
CSR file format. PEM or DER.
1.3.6.1.4.1.2281.10.11.9.10.1.9CsrFileFormatread-onlymandatory
genEquipSecurityCsrUploadConfigTable
OBJECT-TYPE
CSR (Certificate Request) Upload Configuration Table.
1.3.6.1.4.1.2281.10.11.9.11not-accessiblemandatory
genEquipSecurityCsrUploadConfigEntry
OBJECT-TYPE
CSR (Certificate Request) Upload Configuration Table Entry
1.3.6.1.4.1.2281.10.11.9.11.1not-accessiblemandatory
genEquipSecurityCsrUploadConfigIndex
OBJECT-TYPE
CSR upload Configuration index. has Fixed value of 1
1.3.6.1.4.1.2281.10.11.9.11.1.1INTEGERread-onlymandatory
genEquipSecurityCsrUploadConfigIpv4Address
OBJECT-TYPE
IPv4 address of the server, where the file are to be transferred to/from.
1.3.6.1.4.1.2281.10.11.9.11.1.2IpAddressread-writemandatory
genEquipSecurityCsrUploadConfigIpV6Address
OBJECT-TYPE
IPv6 address of the server, where the file are to be transferred to/from
1.3.6.1.4.1.2281.10.11.9.11.1.3OCTET STRING (SIZE(0..16))read-writemandatory
genEquipSecurityCsrUploadConfigTableUsername
OBJECT-TYPE
User name for accesssing files in the server (User credentials to access server).
1.3.6.1.4.1.2281.10.11.9.11.1.4DisplayStringread-writemandatory
genEquipSecurityCsrUploadConfigPassword
OBJECT-TYPE
Password (User credentials to access server).
1.3.6.1.4.1.2281.10.11.9.11.1.5DisplayStringread-writemandatory
genEquipSecurityCsrUploadConfigPath
OBJECT-TYPE
Location of file in the server (folder).
1.3.6.1.4.1.2281.10.11.9.11.1.6DisplayStringread-writemandatory
genEquipSecurityCsrUploadConfigFilename
OBJECT-TYPE
Filename in the server, where the file are to be transferred to/from.
1.3.6.1.4.1.2281.10.11.9.11.1.7DisplayStringread-onlymandatory
genEquipSecurityCertificateDownloadConfigTable
OBJECT-TYPE
CSR (Certificate Request) Download Configuration Table.
1.3.6.1.4.1.2281.10.11.9.12not-accessiblemandatory
genEquipSecurityCertificateDownloadConfigEntry
OBJECT-TYPE
CSR (Certificate Request) Download Configuration Table Entry
1.3.6.1.4.1.2281.10.11.9.12.1not-accessiblemandatory
genEquipSecurityCertificateDownloadConfigIndex
OBJECT-TYPE
Certificate download configuration index. has Fixed value of 1
1.3.6.1.4.1.2281.10.11.9.12.1.1INTEGERread-onlymandatory
genEquipSecurityCertificateDownloadConfigIpv4Address
OBJECT-TYPE
IPv4 address of the server, where the file are to be transferred to/from.
1.3.6.1.4.1.2281.10.11.9.12.1.2IpAddressread-writemandatory
genEquipSecurityCertificateDownloadConfigIpV6Address
OBJECT-TYPE
IPv6 address of the server, where the file are to be transferred to/from
1.3.6.1.4.1.2281.10.11.9.12.1.3OCTET STRING (SIZE(0..16))read-writemandatory
genEquipSecurityCertificateDownloadConfigUsername
OBJECT-TYPE
User name for accesssing files in the server (User credentials to access server).
1.3.6.1.4.1.2281.10.11.9.12.1.4DisplayStringread-writemandatory
genEquipSecurityCertificateDownloadConfigPassword
OBJECT-TYPE
Password (User credentials to access server).
1.3.6.1.4.1.2281.10.11.9.12.1.5DisplayStringread-writemandatory
genEquipSecurityCertificateDownloadConfigPath
OBJECT-TYPE
Location of file in the server (folder).
1.3.6.1.4.1.2281.10.11.9.12.1.6DisplayStringread-writemandatory
genEquipSecurityCertificateDownloadConfigFilename
OBJECT-TYPE
Filename in the server, where the file are to be transferred to/from.
1.3.6.1.4.1.2281.10.11.9.12.1.7DisplayStringread-onlymandatory
genEquipSecurityTrafficCrypto
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.11.10
genEquipSecurityFipsAdmin
OBJECT-TYPE
FIPS admin configuration parameter
1.3.6.1.4.1.2281.10.11.10.1EnableDisableread-writemandatory
genEquipSecurityFipsStatus
OBJECT-TYPE
FIPS operational status.
1.3.6.1.4.1.2281.10.11.10.2DownUpread-onlymandatory
genEquipTrafficCryptoConfigTable
OBJECT-TYPE
Traffic Crypto configuration table.
1.3.6.1.4.1.2281.10.11.10.10not-accessiblemandatory
genEquipTrafficCryptoConfigEntry
OBJECT-TYPE
Traffic Crypto configuration table entry
1.3.6.1.4.1.2281.10.11.10.10.1not-accessiblemandatory
genEquipTrafficCryptoConfigId
OBJECT-TYPE
Traffic crypto Configuration Intreface ID
1.3.6.1.4.1.2281.10.11.10.10.1.1INTEGERread-onlymandatory
genEquipTrafficCryptoConfigConfigAdmin
OBJECT-TYPE
Traffic Crypto Admin Mode.
1.3.6.1.4.1.2281.10.11.10.10.1.2INTEGER {disable(0), aes-256(1)}read-writemandatory
genEquipTrafficCryptoConfigMkey
OBJECT-TYPE
Traffic Crypto Master Key.
1.3.6.1.4.1.2281.10.11.10.10.1.3OCTET STRINGread-writemandatory
genEquipTrafficCryptoConfigBackupMkey
OBJECT-TYPE
Traffic Crypto Backup Master Key
1.3.6.1.4.1.2281.10.11.10.10.1.4OCTET STRINGread-writemandatory
genEquipTrafficCryptoConfigMkeyPeriod
OBJECT-TYPE
Master Key Expire Configuration.
1.3.6.1.4.1.2281.10.11.10.10.1.5INTEGERread-writemandatory
genEquipTrafficCryptoConfigRandKeyGen
OBJECT-TYPE
Random Key generation/clear indication.
1.3.6.1.4.1.2281.10.11.10.10.1.6INTEGER {random-key-generate(0), random-key-clear(1)}read-writemandatory
genEquipTrafficCryptoConfigSkeyPeriod
OBJECT-TYPE
Session Key Update Time Configuration.
1.3.6.1.4.1.2281.10.11.10.10.1.7INTEGERread-writemandatory
genEquipTrafficCryptoStatusTable
OBJECT-TYPE
Traffic Crypto status table.
1.3.6.1.4.1.2281.10.11.10.11not-accessiblemandatory
genEquipTrafficCryptoStatusEntry
OBJECT-TYPE
Traffic Crypto status table Entry
1.3.6.1.4.1.2281.10.11.10.11.1not-accessiblemandatory
genEquipTrafficCryptoStatusId
OBJECT-TYPE
Traffic Crypto Status Intreface ID
1.3.6.1.4.1.2281.10.11.10.11.1.1INTEGERread-onlymandatory
genEquipTrafficCryptoStatusValid
OBJECT-TYPE
Crypto Interface Validation State.
1.3.6.1.4.1.2281.10.11.10.11.1.2INTEGER {not-valid(0), valid(1)}read-onlymandatory
genEquipTrafficCryptoStatusMkeyTimeExpire
OBJECT-TYPE
Number of days Mkey to expire.
1.3.6.1.4.1.2281.10.11.10.11.1.3INTEGERread-onlymandatory