MWRM-PM-MIB
- Registered at
- 1.3.6.1.4.1.2281
- Namespace
- ceraos
- Source file
MWRM-PM-MIB- Digest
sha256:8765c63e8508dd8064bc82cce9b916b6247dbafebd3a0ac65a4651c04c3759a0
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| MWRM-RADIO-MIB | genEquipRadioCfgRadioId |
| MWRM-UNIT-MIB | AllowedNotAllowed, BerLevel, ClockSrc, DownUp, EnableDisable, EnableDisableSMI2, GreenYellow, HalfFull, InputSeverity, Integrity, LoopbackType, MetricImperial, NoYes, OffOn, PmTableType, ProgressStatus, QueueName, RadioId, RateMbps, RfuId, Severity, SignalLevel, SlotId, SwCommand, SwCommandTimer, TrailIfType, TrailProtectedType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB MWRM-PM-MIB MWRM-RADIO-MIB MWRM-UNIT-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2281.10 | genEquip |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| microwave_radio OBJECT-IDENTITY | 1.3.6.1.4.1.2281 | |||
| genEquip OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10 | |||
| genEquipUnit OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.1 | |||
| genEquipPM OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6 | |||
| genEquipPmRfu OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.1 | |||
| genEquipPmRfuCommon OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.1.1 | |||
| genEquipPmRfuCommonSL15minTable OBJECT-TYPE This table indicates the RFU Signal Level PM data. | 1.3.6.1.4.1.2281.10.6.1.1.1 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL15minEntry OBJECT-TYPE Entry containing the data of the RFU SL PM. | 1.3.6.1.4.1.2281.10.6.1.1.1.1 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL15minId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.1.1.1.1.1 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.1.1.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minTimeAndDate OBJECT-TYPE This value indicates the Time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.1.1.1.1.3 | DisplayString | read-only | mandatory |
| genEquipPmRfuCommonSL15minMinRsl OBJECT-TYPE This value indicates the minimum RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minMaxRsl OBJECT-TYPE This value indicates the maximum RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minRslExceed1 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 1. | 1.3.6.1.4.1.2281.10.6.1.1.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minRslExceed2 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 2. | 1.3.6.1.4.1.2281.10.6.1.1.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minMinTsl OBJECT-TYPE This value indicates the Min TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minMaxTsl OBJECT-TYPE This value indicates the Max TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minTslExceed OBJECT-TYPE This value indicates the number of seconds TSL exceeded the threshold | 1.3.6.1.4.1.2281.10.6.1.1.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.1.1.1.1.11 | Integrity | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrTable OBJECT-TYPE This table indicates the RFU Signal Level PM data for the current 15 min. interval. | 1.3.6.1.4.1.2281.10.6.1.1.2 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL15minCurrEntry OBJECT-TYPE Entry containing the data of the Rfu SL PM. | 1.3.6.1.4.1.2281.10.6.1.1.2.1 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL15minCurrId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.1.1.2.1.1 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.1.1.2.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrTimeAndDate OBJECT-TYPE This value indicates the Time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.1.1.2.1.3 | DisplayString | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrMinRsl OBJECT-TYPE This value indicates the minimum RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.2.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrMaxRsl OBJECT-TYPE This value indicates the maximum RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.2.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrRslExceed1 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 1. | 1.3.6.1.4.1.2281.10.6.1.1.2.1.6 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrRslExceed2 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 2. | 1.3.6.1.4.1.2281.10.6.1.1.2.1.7 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrMinTsl OBJECT-TYPE This value indicates the Min TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.2.1.8 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrMaxTsl OBJECT-TYPE This value indicates the Max TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.2.1.9 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrTslExceed OBJECT-TYPE This value indicates the number of seconds TSL exceeded the threshold | 1.3.6.1.4.1.2281.10.6.1.1.2.1.10 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL15minCurrIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the current interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.1.1.2.1.11 | Integrity | read-only | mandatory |
| genEquipPmRfuCommonSL24hrTable OBJECT-TYPE This table indicates the RFU Signal Level 24 hr PM data. | 1.3.6.1.4.1.2281.10.6.1.1.3 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL24hrEntry OBJECT-TYPE Entry containing the data of the RFU SL PM. | 1.3.6.1.4.1.2281.10.6.1.1.3.1 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL24hrId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.1.1.3.1.1 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.1.1.3.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrTimeAndDate OBJECT-TYPE This value indicates the time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.1.1.3.1.3 | DisplayString | read-only | mandatory |
| genEquipPmRfuCommonSL24hrMinRsl OBJECT-TYPE This value indicates the min RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.3.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrMaxRsl OBJECT-TYPE This value indicates the max RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.3.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrRslExceed1 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 1. | 1.3.6.1.4.1.2281.10.6.1.1.3.1.6 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrRslExceed2 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 2. | 1.3.6.1.4.1.2281.10.6.1.1.3.1.7 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrMinTsl OBJECT-TYPE This value indicates the Min TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.3.1.8 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrMaxTsl OBJECT-TYPE This value indicates the Max TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.3.1.9 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrTslExceed OBJECT-TYPE This value indicates the number of seconds RSL exceeded the threshold | 1.3.6.1.4.1.2281.10.6.1.1.3.1.10 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.1.1.3.1.11 | Integrity | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrTable OBJECT-TYPE This table indicates the RFU Signal Level PM data for the current 24 hour interval. | 1.3.6.1.4.1.2281.10.6.1.1.4 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL24hrCurrEntry OBJECT-TYPE Entry containing the data of the RFU SL PM. | 1.3.6.1.4.1.2281.10.6.1.1.4.1 | not-accessible | mandatory | |
| genEquipPmRfuCommonSL24hrCurrId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.1.1.4.1.1 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.1.1.4.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrTimeAndDate OBJECT-TYPE This value indicates the time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.1.1.4.1.3 | DisplayString | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrMinRsl OBJECT-TYPE This value indicates the min RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.4.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrMaxRsl OBJECT-TYPE This value indicates the Max RSL value. | 1.3.6.1.4.1.2281.10.6.1.1.4.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrRslExceed1 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 1. | 1.3.6.1.4.1.2281.10.6.1.1.4.1.6 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrRslExceed2 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 2. | 1.3.6.1.4.1.2281.10.6.1.1.4.1.7 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrMinTsl OBJECT-TYPE This value indicates the Min TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.4.1.8 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrMaxTsl OBJECT-TYPE This value indicates the Max TSL value. | 1.3.6.1.4.1.2281.10.6.1.1.4.1.9 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrTslExceed OBJECT-TYPE This value indicates the number of seconds TSL exceeded the threshold | 1.3.6.1.4.1.2281.10.6.1.1.4.1.10 | INTEGER | read-only | mandatory |
| genEquipPmRfuCommonSL24hrCurrIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.1.1.4.1.11 | Integrity | read-only | mandatory |
| genEquipPmTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.2 | |||
| genEquipPmTrafficRadioAgg15minTable OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.1 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg15minEntry OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.1.1 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg15minId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.2.1.1.1 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.2.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minTimeAndDate OBJECT-TYPE This value indicates the time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.2.1.1.3 | DisplayString | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minES OBJECT-TYPE This value indicates the ES value. | 1.3.6.1.4.1.2281.10.6.2.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minSES OBJECT-TYPE This value indicates the SES value. | 1.3.6.1.4.1.2281.10.6.2.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minUAS OBJECT-TYPE This value indicates the UAS value. | 1.3.6.1.4.1.2281.10.6.2.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minBBE OBJECT-TYPE This value indicates the BBE value. | 1.3.6.1.4.1.2281.10.6.2.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.2.1.1.8 | Integrity | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrTable OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.2 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg15minCurrEntry OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.2.1 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg15minCurrId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.2.2.1.1 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.2.2.1.2 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrTimeAndDate OBJECT-TYPE This value indicates the time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.2.2.1.3 | DisplayString | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrES OBJECT-TYPE This value indicates the ES value. | 1.3.6.1.4.1.2281.10.6.2.2.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrSES OBJECT-TYPE This value indicates the SES value. | 1.3.6.1.4.1.2281.10.6.2.2.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrUAS OBJECT-TYPE This value indicates the UAS value. | 1.3.6.1.4.1.2281.10.6.2.2.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrBBE OBJECT-TYPE This value indicates the BBE value. | 1.3.6.1.4.1.2281.10.6.2.2.1.7 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg15minCurrIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.2.2.1.8 | Integrity | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrTable OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.3 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg24hrEntry OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.3.1 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg24hrId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.2.3.1.1 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.2.3.1.2 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrTimeAndDate OBJECT-TYPE This value indicates the time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.2.3.1.3 | DisplayString | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrES OBJECT-TYPE This value indicates the ES value. | 1.3.6.1.4.1.2281.10.6.2.3.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrSES OBJECT-TYPE This value indicates the SES value. | 1.3.6.1.4.1.2281.10.6.2.3.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrUAS OBJECT-TYPE This value indicates the UAS value. | 1.3.6.1.4.1.2281.10.6.2.3.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrBBE OBJECT-TYPE This value indicates the BBE value. | 1.3.6.1.4.1.2281.10.6.2.3.1.7 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.2.3.1.8 | Integrity | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrTable OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.4 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg24hrCurrEntry OBJECT-TYPE This table indicates the Radio Aggregate PM data for all 15 min intervals. | 1.3.6.1.4.1.2281.10.6.2.4.1 | not-accessible | mandatory | |
| genEquipPmTrafficRadioAgg24hrCurrId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.2.4.1.1 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.2.4.1.2 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrTimeAndDate OBJECT-TYPE This value indicates the time and date for the specific PM. | 1.3.6.1.4.1.2281.10.6.2.4.1.3 | DisplayString | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrES OBJECT-TYPE This value indicates the ES value. | 1.3.6.1.4.1.2281.10.6.2.4.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrSES OBJECT-TYPE This value indicates the SES value. | 1.3.6.1.4.1.2281.10.6.2.4.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrUAS OBJECT-TYPE This value indicates the UAS value. | 1.3.6.1.4.1.2281.10.6.2.4.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrBBE OBJECT-TYPE This value indicates the BBE value. | 1.3.6.1.4.1.2281.10.6.2.4.1.7 | INTEGER | read-only | mandatory |
| genEquipPmTrafficRadioAgg24hrCurrIDF OBJECT-TYPE This value indicates the IDF (Invalid Data Flag) of the current interval. integrity(0), nointegrity(1). | 1.3.6.1.4.1.2281.10.6.2.4.1.8 | Integrity | read-only | mandatory |
| genEquipPmAll OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3 | |||
| genEquipPmClear OBJECT-TYPE Clear All values for PM tables. | 1.3.6.1.4.1.2281.10.6.3.1 | OffOn | read-write | mandatory |
| genEquipPmTrafficSL OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.2 | |||
| genEquipPmTrafficSLTable OBJECT-TYPE This table indicates the RFU Signal Level PM data. | 1.3.6.1.4.1.2281.10.6.3.2.1 | not-accessible | mandatory | |
| genEquipPmTrafficSLEntry OBJECT-TYPE Entry containing the data of the RFU signal level PM. | 1.3.6.1.4.1.2281.10.6.3.2.1.1 | not-accessible | mandatory | |
| genEquipPmTrafficSLPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.2.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmTrafficSLId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.3.2.1.1.2 | RfuId | read-only | mandatory |
| genEquipPmTrafficSLInterval OBJECT-TYPE This value indicates an index of a specific PM Interval | 1.3.6.1.4.1.2281.10.6.3.2.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLMinRsl OBJECT-TYPE This value indicates the min RSL value. | 1.3.6.1.4.1.2281.10.6.3.2.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLMaxRsl OBJECT-TYPE This value indicates the max RSL value. | 1.3.6.1.4.1.2281.10.6.3.2.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLRslExceed1 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 1. | 1.3.6.1.4.1.2281.10.6.3.2.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLRslExceed2 OBJECT-TYPE This value indicates the number of seconds RSL exceeded threshold number 2. | 1.3.6.1.4.1.2281.10.6.3.2.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLMinTsl OBJECT-TYPE This value indicates the Minimum TSL value. | 1.3.6.1.4.1.2281.10.6.3.2.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLMaxTsl OBJECT-TYPE This value indicates the Maximum TSL value. | 1.3.6.1.4.1.2281.10.6.3.2.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLTslExceed OBJECT-TYPE This value indicates the number of seconds TSL exceeded the threshold | 1.3.6.1.4.1.2281.10.6.3.2.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmTrafficSLIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.2.1.1.11 | Integrity | read-only | mandatory |
| genEquipPmTrafficAggregate OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.3 | |||
| genEquipPmTrafficAggTable OBJECT-TYPE This table indicates the Radio Aggregate PM data. | 1.3.6.1.4.1.2281.10.6.3.3.1 | not-accessible | mandatory | |
| genEquipPmTrafficAggEntry OBJECT-TYPE This table indicates the Radio Aggregate PM data. | 1.3.6.1.4.1.2281.10.6.3.3.1.1 | not-accessible | mandatory | |
| genEquipPmTrafficAggPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.3.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmTrafficAggInterval OBJECT-TYPE This value indicates an index of a specific PM Interval | 1.3.6.1.4.1.2281.10.6.3.3.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmTrafficAggES OBJECT-TYPE This value indicates the ES value (Errored seconds). | 1.3.6.1.4.1.2281.10.6.3.3.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmTrafficAggSES OBJECT-TYPE This value indicates the SES value (Severe Errored seconds). | 1.3.6.1.4.1.2281.10.6.3.3.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTrafficAggUAS OBJECT-TYPE This value indicates the UAS value. (Unavailable Seconds) | 1.3.6.1.4.1.2281.10.6.3.3.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTrafficAggBBE OBJECT-TYPE This value indicates the BBE value. (Background Block Error) | 1.3.6.1.4.1.2281.10.6.3.3.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTrafficAggIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.3.1.1.7 | Integrity | read-only | mandatory |
| genEquipPmRadio OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.4 | |||
| genEquipPmRadioMRMC OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.4.1 | |||
| genEquipPmRadioMRMCTable OBJECT-TYPE The MRMC PM table | 1.3.6.1.4.1.2281.10.6.3.4.1.1 | not-accessible | mandatory | |
| genEquipPmRadioMRMCEntry OBJECT-TYPE The MRMC PM table | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1 | not-accessible | mandatory | |
| genEquipPmRadioMRMCPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmRadioMRMCId OBJECT-TYPE This value indicates an index of a specific RFU | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.2 | RadioId | read-only | mandatory |
| genEquipPmRadioMRMCInterval OBJECT-TYPE This value indicates an index of a specific PM Interval | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCIfIndex OBJECT-TYPE This value indicates the interface index of a specific RFU interface (as appears in the ifTable) | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCMinProfile OBJECT-TYPE Minimum MRMC profile. | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCMaxProfile OBJECT-TYPE The maximum profile (Kbps) that was measured during the interva | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCMinBitrate OBJECT-TYPE Minimum MRMC nominal bitrate (Units are Kbps) | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCMaxBitrate OBJECT-TYPE Maximum MRMC nominal bitrate (Units are Kbps) | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCMinTDMIf OBJECT-TYPE Minimum number of allocated TDM channels | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCMaxTDMIf OBJECT-TYPE Maximum number of allocated TDM channels | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmRadioMRMCIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.11 | Integrity | read-only | mandatory |
| genEquipPmRadioTDM OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.4.2 | |||
| genEquipPmRadioTDMTable OBJECT-TYPE The PM table of logical TDM channels within the Radio link | 1.3.6.1.4.1.2281.10.6.3.4.2.1 | not-accessible | mandatory | |
| genEquipPmRadioTDMEntry OBJECT-TYPE The PM table of logical TDM channels within the Radio link | 1.3.6.1.4.1.2281.10.6.3.4.2.1.1 | not-accessible | mandatory | |
| genEquipPmRadioTDMPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmRadioTDMInterval OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRadioTDMRadioUAS OBJECT-TYPE TDM channel UAS (unavailable seconds) | 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmRadioTDMIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.4 | Integrity | read-only | mandatory |
| genEquipPmRadioEthernet OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.4.3 | |||
| genEquipPmRadioEthernetTable OBJECT-TYPE The Ethernet PMs on the radio link | 1.3.6.1.4.1.2281.10.6.3.4.3.1 | not-accessible | mandatory | |
| genEquipPmRadioEthernetEntry OBJECT-TYPE The Ethernet PMs on the radio link | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1 | not-accessible | mandatory | |
| genEquipPmRadioEthernetPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmRadioEthernetInterval OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetFrameErrorRate OBJECT-TYPE Ethernet Frame Error Rate PM | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetPeakThroughput OBJECT-TYPE Ethernet Peak throughput PM (Units are bits per second) | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetAverageThroughput OBJECT-TYPE Ethernet Average throughput PM (Units are bits per second) | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetExceedThroughput OBJECT-TYPE Ethernet Exceed throughput PM | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetPeakCapacity OBJECT-TYPE Ethernet Peak capacity PM (in bps) | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetAverageCapacity OBJECT-TYPE Ethernet Average capacity PM (in bps) | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetExceedCapacity OBJECT-TYPE Ethernet Exceed capacity PM | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetPeakUtilization OBJECT-TYPE Ethernet Peak utilization PM (%) | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetAverageUtilization OBJECT-TYPE Ethernet Average utilization PM (%) | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.11 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetExceedUtilization OBJECT-TYPE Ethernet Exceed utilization PM | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.12 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.13 | Integrity | read-only | mandatory |
| genEquipPmRadioEthernetThresholdTable OBJECT-TYPE The Ethernet PMs on the radio link | 1.3.6.1.4.1.2281.10.6.3.4.3.2 | not-accessible | mandatory | |
| genEquipPmRadioEthernetThresholdEntry OBJECT-TYPE The Ethernet PMs on the radio link | 1.3.6.1.4.1.2281.10.6.3.4.3.2.1 | not-accessible | mandatory | |
| genEquipPmRadioEthernetThresholdThroughput OBJECT-TYPE Ethernet Throughput threshold (in Mbps) | 1.3.6.1.4.1.2281.10.6.3.4.3.2.1.1 | INTEGER (0..1000) | read-write | mandatory |
| genEquipPmRadioEthernetThresholdCapacity OBJECT-TYPE Ethernet capacity threshold (in Mbps) | 1.3.6.1.4.1.2281.10.6.3.4.3.2.1.2 | INTEGER (0..1000) | read-write | mandatory |
| genEquipPmRadioEthernetThresholdUtilization OBJECT-TYPE Ethernet utilization threshold (in percentage). | 1.3.6.1.4.1.2281.10.6.3.4.3.2.1.3 | INTEGER {above-0(0), above-20(1), above-40(2), above-60(3), above-80(4), no-threshold(5)} | read-write | mandatory |
| genEquipPmRadioEthernetEtmTable OBJECT-TYPE The Ethernet PMs on the radio link | 1.3.6.1.4.1.2281.10.6.3.4.3.3 | not-accessible | mandatory | |
| genEquipPmRadioEthernetEtmEntry OBJECT-TYPE The entry of Ethernet ETM PMs on the radio link | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1 | not-accessible | mandatory | |
| genEquipPmRadioEthernetEtmPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.1 | PmTableType | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmQueueIndex OBJECT-TYPE Queue index | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.2 | INTEGER (1..8) | read-only | mandatory |
| genEquipPmRadioEthernetEtmInterval OBJECT-TYPE The interval of the PM. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.3 | INTEGER (0..96) | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxGreenBytesPassed OBJECT-TYPE Maximum Green Traffic Passed Bytes. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgGreenBytesPassed OBJECT-TYPE Average Green Traffic Passed Bytes. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxGreenFramesDropped OBJECT-TYPE Maximum Green Traffic Frames Droped by WRED. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.6 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgGreenFramesDropped OBJECT-TYPE Average Green Traffic Frames Droped by WRED. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.7 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxYellowBytesPassed OBJECT-TYPE Maximum Yellow Traffic Passed Bytes. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.8 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgYellowBytesPassed OBJECT-TYPE Average Yellow Traffic Passed Bytes. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.9 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxYellowFramesDropped OBJECT-TYPE Maximum Yellow Traffic Frames Droped by WRED. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.10 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgYellowFramesDropped OBJECT-TYPE Average Yellow Traffic Frames Droped by WRED. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.11 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxRedFramesDropped OBJECT-TYPE Maximum Red Traffic Frames Dropped. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.12 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgRedFramesDropped OBJECT-TYPE Average Red Traffic Frames Dropped. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.13 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.14 | Integrity | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxGreenFramesPassed OBJECT-TYPE Maximum Green Traffic Frames Passed. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.17 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgGreenFramesPassed OBJECT-TYPE Average Green Traffic Frames Passed. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.18 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxYellowFramesPassed OBJECT-TYPE Maximum Yellow Traffic Frames Passed. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.21 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgYellowFramesPassed OBJECT-TYPE Average Yellow Traffic Frames Passed. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.22 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmMaxRedBytesDropped OBJECT-TYPE Maximum Red Traffic Bytes Dropped. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.23 | INTEGER | read-only | mandatory |
| genEquipPmRadioEthernetEtmPmAvgRedBytesDropped OBJECT-TYPE Average Red Traffic Bytes Dropped. | 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.24 | INTEGER | read-only | mandatory |
| genEquipPmRadioMSETable OBJECT-TYPE Radio MSE PM | 1.3.6.1.4.1.2281.10.6.3.4.4 | not-accessible | mandatory | |
| genEquipPmRadioMSEEntry OBJECT-TYPE Radio MSE PM | 1.3.6.1.4.1.2281.10.6.3.4.4.1 | not-accessible | mandatory | |
| genEquipPmRadioMSEPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.4.4.1.1 | PmTableType | read-only | mandatory |
| genEquipPmRadioMSEInterval OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.4.4.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRadioMSEMinMse OBJECT-TYPE This parameter holds the minimum MSE value detected in the interval. | 1.3.6.1.4.1.2281.10.6.3.4.4.1.3 | INTEGER | read-only | mandatory |
| genEquipPmRadioMSEMaxMse OBJECT-TYPE This parameter holds the maximum MSE value detected in the interval. | 1.3.6.1.4.1.2281.10.6.3.4.4.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRadioMSEexceeded OBJECT-TYPE This parameter holds the number of seconds that the MSE exceeded the configured threshold. | 1.3.6.1.4.1.2281.10.6.3.4.4.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRadioMSEIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.4.4.1.6 | Integrity | read-only | mandatory |
| genEquipPmRadioThresholdTable OBJECT-TYPE Radio MSE PM | 1.3.6.1.4.1.2281.10.6.3.4.5 | not-accessible | mandatory | |
| genEquipPmRadioThresholdEntry OBJECT-TYPE Radio MSE PM | 1.3.6.1.4.1.2281.10.6.3.4.5.1 | not-accessible | mandatory | |
| genEquipPmRadioThresholdMSE OBJECT-TYPE The threshold above which MSE (Mean Square Error) exceeded seconds will be counted | 1.3.6.1.4.1.2281.10.6.3.4.5.1.1 | INTEGER (-99..-1) | read-write | mandatory |
| genEquipPmRadioThresholdRSL1 OBJECT-TYPE The threshold below which RSL 1 exceeded seconds will be counted | 1.3.6.1.4.1.2281.10.6.3.4.5.1.2 | INTEGER (-75..-15) | read-write | mandatory |
| genEquipPmRadioThresholdRSL2 OBJECT-TYPE The threshold below which RSL 2 exceeded seconds will be counted | 1.3.6.1.4.1.2281.10.6.3.4.5.1.3 | INTEGER (-75..-15) | read-write | mandatory |
| genEquipPmRadioThresholdTSL OBJECT-TYPE The threshold above which TSL exceeded seconds will be counted | 1.3.6.1.4.1.2281.10.6.3.4.5.1.4 | INTEGER | read-write | mandatory |
| genEquipPmRadioThresholdXPI OBJECT-TYPE The threshold above which XPI (Cross Polar Interference) exceeded seconds will be counted | 1.3.6.1.4.1.2281.10.6.3.4.5.1.5 | INTEGER (0..99) | read-write | mandatory |
| genEquipPmRadioXPITable OBJECT-TYPE Radio XPIC PM | 1.3.6.1.4.1.2281.10.6.3.4.6 | not-accessible | mandatory | |
| genEquipPmRadioXPIEntry OBJECT-TYPE Radio XPIC PM | 1.3.6.1.4.1.2281.10.6.3.4.6.1 | not-accessible | mandatory | |
| genEquipPmRadioXPIPmType OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.4.6.1.1 | PmTableType | read-only | mandatory |
| genEquipPmRadioXPIPmInterval OBJECT-TYPE The number of the interval: 1-30 in case the interval is 24 hours or 1-900 in case the interval is 15 minutes | 1.3.6.1.4.1.2281.10.6.3.4.6.1.2 | INTEGER | read-only | mandatory |
| genEquipPmRadioXPIPmMinXPI OBJECT-TYPE This parameter holds the minimum XPI value detected in the interval | 1.3.6.1.4.1.2281.10.6.3.4.6.1.3 | INTEGER | read-only | mandatory |
| genEquipPmRadioXPIPmMaxXPI OBJECT-TYPE This parameter holds the maximum XPI value detected in the interval | 1.3.6.1.4.1.2281.10.6.3.4.6.1.4 | INTEGER | read-only | mandatory |
| genEquipPmRadioXPIBelowThreshold OBJECT-TYPE This parameter holds the number of seconds in the interval that the XPI value was below the configured threshold. | 1.3.6.1.4.1.2281.10.6.3.4.6.1.5 | INTEGER | read-only | mandatory |
| genEquipPmRadioXPIIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.4.6.1.6 | Integrity | read-only | mandatory |
| genEquipPmRadioClear OBJECT-TYPE Clear all radio PMs (Performance Monitoring). | 1.3.6.1.4.1.2281.10.6.3.4.7 | OffOn | read-write | mandatory |
| genEquipPmTDM OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.5 | |||
| genEquipPmTdmTable OBJECT-TYPE The line TDM PM table | 1.3.6.1.4.1.2281.10.6.3.5.1 | not-accessible | mandatory | |
| genEquipPmTdmEntry OBJECT-TYPE The line TDM PM table | 1.3.6.1.4.1.2281.10.6.3.5.1.1 | not-accessible | mandatory | |
| genEquipPmTdmPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.5.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmTdmInterval OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.5.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmTdmES OBJECT-TYPE ES PM (Errored second) | 1.3.6.1.4.1.2281.10.6.3.5.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmTdmSES OBJECT-TYPE SES PM (Severe Errored Seconds) | 1.3.6.1.4.1.2281.10.6.3.5.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTdmUAS OBJECT-TYPE UAS PM (Unavailable Seconds). | 1.3.6.1.4.1.2281.10.6.3.5.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTdmBBE OBJECT-TYPE BBE PM (Background Block Errors) | 1.3.6.1.4.1.2281.10.6.3.5.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTdmIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.5.1.1.7 | Integrity | read-only | mandatory |
| genEquipPmSDH OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.6 | |||
| genEquipPmSdhTable OBJECT-TYPE The line SDH PM table. | 1.3.6.1.4.1.2281.10.6.3.6.1 | not-accessible | mandatory | |
| genEquipPmSdhEntry OBJECT-TYPE The line SDH PM table. | 1.3.6.1.4.1.2281.10.6.3.6.1.1 | not-accessible | mandatory | |
| genEquipPmSdhPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmSdhInterval OBJECT-TYPE The interval of the PM. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmSdhES OBJECT-TYPE ES STM-1/OC-3 PM. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmSdhSES OBJECT-TYPE SES STM-1/OC-3 PM. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmSdhEB OBJECT-TYPE EB STM-1/OC-3 PM (Errored block). | 1.3.6.1.4.1.2281.10.6.3.6.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmSdhBBE OBJECT-TYPE BBE PM (background errored block STM-1/OC-3 PM or CVL PM (code violation line) when using OC-3. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmSdhIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.7 | Integrity | read-only | mandatory |
| genEquipPmSdhIfIndex OBJECT-TYPE Port Number. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmSdhTimeStamp OBJECT-TYPE This value indicates the time stamp of the interval. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmSdhUAS OBJECT-TYPE Un-Available Seconds STM-1/OC-3 PM. | 1.3.6.1.4.1.2281.10.6.3.6.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRTable OBJECT-TYPE SONET/STM-1 interface-level PMs for line to radio direction. | 1.3.6.1.4.1.2281.10.6.3.6.2 | not-accessible | mandatory | |
| genEquipPmSdhRstLREntry OBJECT-TYPE SONET/STM-1 interface-level PMs for line to radio direction entry. | 1.3.6.1.4.1.2281.10.6.3.6.2.1 | not-accessible | mandatory | |
| genEquipPmSdhRstLRPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.1 | PmTableType | read-only | mandatory |
| genEquipPmSdhRstLRIfIndex OBJECT-TYPE Port number. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.2 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRInterval OBJECT-TYPE The interval of the PM. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.3 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRTimeStamp OBJECT-TYPE This value indicates the time stamp of the interval. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.4 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRES OBJECT-TYPE Errored Seconds PM for STM-1/OC-3 on line to radio direction. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.5 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRSES OBJECT-TYPE Severely Errored Seconds PM for STM-1/OC-3 on line to radio direction. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.6 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRUAS OBJECT-TYPE Unavailable Seconds PM for STM-1/OC-3. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.7 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLREB OBJECT-TYPE Errored Blocks PM for STM-1/OC-3 on line to radio direction. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.8 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRCV OBJECT-TYPE Code Viloations PM for STM-1/OC-3 on line to radio direction. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.9 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRBBE OBJECT-TYPE Background Block Error PM for STM-1/OC-3 on line to radio direction. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.10 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstLRIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.6.2.1.11 | Integrity | read-only | mandatory |
| genEquipPmSdhRstRLTable OBJECT-TYPE SONET/STM-1 interface-level PMs for radio to line direction. | 1.3.6.1.4.1.2281.10.6.3.6.3 | not-accessible | mandatory | |
| genEquipPmSdhRstRLEntry OBJECT-TYPE SONET/STM-1 interface-level PMs for radio to line direction entry. | 1.3.6.1.4.1.2281.10.6.3.6.3.1 | not-accessible | mandatory | |
| genEquipPmSdhRstRLPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.1 | PmTableType | read-only | mandatory |
| genEquipPmSdhRstRLIfIndex OBJECT-TYPE Port number. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.2 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLInterval OBJECT-TYPE The interval of the PM. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.3 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLTimeStamp OBJECT-TYPE This value indicates the time stamp of the interval. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.4 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLES OBJECT-TYPE Errored Seconds PM for STM-1/OC-3 on radio to line direction. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.5 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLSES OBJECT-TYPE Severely Errored Seconds PM for STM-1/OC-3 on radio to line direction. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.6 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLUAS OBJECT-TYPE Unavailable Seconds PM for STM-1/OC-3. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.7 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLEB OBJECT-TYPE Errored Blocks PM for STM-1/OC-3 on radio to line direction. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.8 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLCV OBJECT-TYPE Code Viloations PM for STM-1/OC-3 on radio to line direction. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.9 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLBBE OBJECT-TYPE Background Block Error PM for STM-1/OC-3 on radio to line direction. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.10 | INTEGER | read-only | mandatory |
| genEquipPmSdhRstRLIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.6.3.1.11 | Integrity | read-only | mandatory |
| genEquipPmTrails OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.7 | |||
| genEquipPmTrailsEndPointTable OBJECT-TYPE PM table of the E1/T1 trails. | 1.3.6.1.4.1.2281.10.6.3.7.1 | not-accessible | mandatory | |
| genEquipPmTrailsEndPointEntry OBJECT-TYPE PM table of the E1/T1 trails. | 1.3.6.1.4.1.2281.10.6.3.7.1.1 | not-accessible | mandatory | |
| genEquipPmTrailsEndPointPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. | 1.3.6.1.4.1.2281.10.6.3.7.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmTrailsEndPointId OBJECT-TYPE This value indicates the trail id. | 1.3.6.1.4.1.2281.10.6.3.7.1.1.2 | DisplayString | read-only | mandatory |
| genEquipPmTrailsEndPointEPId OBJECT-TYPE This value indicates the end point number for this trail. If the trail is protected, there will be two end points for the trail (primary path and the secondary path). | 1.3.6.1.4.1.2281.10.6.3.7.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointInterval OBJECT-TYPE The interval of the PM. | 1.3.6.1.4.1.2281.10.6.3.7.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointES OBJECT-TYPE ES PM (Errored Seconds). | 1.3.6.1.4.1.2281.10.6.3.7.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointSES OBJECT-TYPE SES PM (Severe Errored Seconds). | 1.3.6.1.4.1.2281.10.6.3.7.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointUAS OBJECT-TYPE UAS PM (Unavailable Seconds). | 1.3.6.1.4.1.2281.10.6.3.7.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointBBE OBJECT-TYPE BBE PM (Background Block Errors). | 1.3.6.1.4.1.2281.10.6.3.7.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointNoOfSwitches OBJECT-TYPE A counter of the number of SNCP switches (between primary and secondary paths) that trail had in the relevant interval. | 1.3.6.1.4.1.2281.10.6.3.7.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointActivePathCounts OBJECT-TYPE Active path seconds. | 1.3.6.1.4.1.2281.10.6.3.7.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmTrailsEndPointIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.7.1.1.11 | Integrity | read-only | mandatory |
| genEquipPmPW OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.8 | |||
| genEquipPmPWTable OBJECT-TYPE This table shows standard pseudowire-level PM measurements. Notice that PMs at the TDM port level are maintained separately. | 1.3.6.1.4.1.2281.10.6.3.8.1 | not-accessible | mandatory | |
| genEquipPmPWEntry OBJECT-TYPE This table shows standard pseudowire-level PM measurements. Notice that PMs at the TDM port level are maintained separately. | 1.3.6.1.4.1.2281.10.6.3.8.1.1 | not-accessible | mandatory | |
| genEquipPmPWPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.1 | PmTableType | read-only | mandatory |
| genEquipPmPWId OBJECT-TYPE This value indicates the trail id. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmPWInterval OBJECT-TYPE The interval of the PM. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmPWMissingPkts OBJECT-TYPE Number of missing packets (as detected via control word sequence number gaps). | 1.3.6.1.4.1.2281.10.6.3.8.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmPWPktsReOrder OBJECT-TYPE Number of packets detected out of sequence (via control word sequence number) but successfully re-ordered. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmPWtrBfrUnderruns OBJECT-TYPE Number of times a packet needed to be played out and the jitter buffer was empty. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmPWMisOrderDropped OBJECT-TYPE Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmPWMalformedPkt OBJECT-TYPE Number of packets detected with unexpected size, or bad headers' stack. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmPWES OBJECT-TYPE ES PM (Errored Seconds). | 1.3.6.1.4.1.2281.10.6.3.8.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmPWSES OBJECT-TYPE SES PM (Severe Errored Seconds). | 1.3.6.1.4.1.2281.10.6.3.8.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmPWUAS OBJECT-TYPE UAS PM (Unavailable Seconds). | 1.3.6.1.4.1.2281.10.6.3.8.1.1.11 | INTEGER | read-only | mandatory |
| genEquipPmPWFC OBJECT-TYPE FC (Failure Counts) PM. A failure is a LOPS event. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.12 | INTEGER | read-only | mandatory |
| genEquipPmPWIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.8.1.1.13 | Integrity | read-only | mandatory |
| genEquipPmNGPWTable OBJECT-TYPE This table contains PW Performance Monitoring counters. | 1.3.6.1.4.1.2281.10.6.3.8.2 | not-accessible | mandatory | |
| genEquipPmNGPWEntry OBJECT-TYPE This table entry contains PW Performance Monitoring counters. | 1.3.6.1.4.1.2281.10.6.3.8.2.1 | not-accessible | mandatory | |
| genEquipPmNGPWPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.1 | PmTableType | read-only | mandatory |
| genEquipPmNGPWIfIndex OBJECT-TYPE This value indicates the interface Index. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.2 | INTEGER | read-only | mandatory |
| genEquipPmNGPWInterval OBJECT-TYPE The interval of the PM. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.3 | INTEGER | read-only | mandatory |
| genEquipPmNGPWES OBJECT-TYPE ES (Errored Seconds) PM. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.4 | INTEGER | read-only | mandatory |
| genEquipPmNGPWSES OBJECT-TYPE SES (Severe Errored Seconds) PM. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.5 | INTEGER | read-only | mandatory |
| genEquipPmNGPWUAS OBJECT-TYPE UAS (Unavailable Seconds) PM. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.6 | INTEGER | read-only | mandatory |
| genEquipPmNGPWFC OBJECT-TYPE FC (Failure Counts) PM. A failure is a LOPS event. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.7 | INTEGER | read-only | mandatory |
| genEquipPmNGPWFER OBJECT-TYPE Frame Error Ratio. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.8 | INTEGER | read-only | mandatory |
| genEquipPmNGPWMissingPkts OBJECT-TYPE Number of missing packets (as detected via control word sequence number gaps). | 1.3.6.1.4.1.2281.10.6.3.8.2.1.9 | INTEGER | read-only | mandatory |
| genEquipPmNGPWPktsReOrder OBJECT-TYPE Number of packets detected out of sequence (via control word sequence number) but successfully re-ordered. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.10 | INTEGER | read-only | mandatory |
| genEquipPmNGPWMisOrderDropped OBJECT-TYPE Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.11 | INTEGER | read-only | mandatory |
| genEquipPmNGPWMalformedPkt OBJECT-TYPE Number of packets detected with unexpected size, or bad headers' stack. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.12 | INTEGER | read-only | mandatory |
| genEquipPmNGPWIdf OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.8.2.1.13 | Integrity | read-only | mandatory |
| genEquipPmEthUtilization OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.9 | |||
| genEquipPmEthUtilizationAdmin OBJECT-TYPE Ethernet port utilization PM admin | 1.3.6.1.4.1.2281.10.6.3.9.1 | EnableDisable | read-write | mandatory |
| genEquipPmEthUtilizationThreshold OBJECT-TYPE User defined threshold for Ethernet port utilization PM. | 1.3.6.1.4.1.2281.10.6.3.9.2 | INTEGER (0..100) | read-write | mandatory |
| genEquipPmEthUtilizationTable OBJECT-TYPE The Ethernet ports Utilization PMs | 1.3.6.1.4.1.2281.10.6.3.9.3 | not-accessible | mandatory | |
| genEquipPmEthUtilizationEntry OBJECT-TYPE The Ethernet ports Utilization PMs | 1.3.6.1.4.1.2281.10.6.3.9.3.1 | not-accessible | mandatory | |
| genEquipPmEthUtilizationPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.9.3.1.1 | PmTableType | read-only | mandatory |
| genEquipPmEthUtilizationInterval OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.9.3.1.2 | INTEGER | read-only | mandatory |
| genEquipPmEthUtilizationPeakUtilization OBJECT-TYPE Peak Ethernet port utilization of the current interval. | 1.3.6.1.4.1.2281.10.6.3.9.3.1.3 | INTEGER | read-only | mandatory |
| genEquipPmEthUtilizationAverageUtilization OBJECT-TYPE Average Ethernet port utilization of the current interval. | 1.3.6.1.4.1.2281.10.6.3.9.3.1.4 | INTEGER | read-only | mandatory |
| genEquipPmEthUtilizationExceedUtilization OBJECT-TYPE Number of seconds in current interval when Ethernet port utilization exceeded the user defined threshold. | 1.3.6.1.4.1.2281.10.6.3.9.3.1.5 | INTEGER | read-only | mandatory |
| genEquipPmEthUtilizationIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.9.3.1.6 | Integrity | read-only | mandatory |
| genEquipPmEthernetIngressPolicer OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.10 | |||
| genEquipPmEthernetIngressPolicerUnicastStatisticsTable OBJECT-TYPE logical Interface unicast policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.1 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerUnicastStatisticsEntry OBJECT-TYPE logical Interface unicast policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.1.1 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerUnicastStatisticsIfIndex OBJECT-TYPE Ethernet Logical port if-index table key | 1.3.6.1.4.1.2281.10.6.3.10.1.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetIngressPolicerUnicastStatisticsClearOnRead OBJECT-TYPE Clear counter statistics after reading. | 1.3.6.1.4.1.2281.10.6.3.10.1.1.2 | NoYes | read-write | mandatory |
| genEquipPmEthernetIngressPolicerUnicastStatisticsGreenPacket OBJECT-TYPE The number of packets that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.1.1.3 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerUnicastStatisticsGreenBytes OBJECT-TYPE The number of bytes that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.1.1.4 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerUnicastStatisticsYellowPacket OBJECT-TYPE The number of packets that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.1.1.5 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerUnicastStatisticsYellowBytes OBJECT-TYPE The number of bytes that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.1.1.6 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerUnicastStatisticsRedPacket OBJECT-TYPE The number of packets that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.1.1.7 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerUnicastStatisticsRedBytes OBJECT-TYPE The number of bytes that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.1.1.8 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsTable OBJECT-TYPE Logical Port multicast policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.2 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerMulticastStatisticsEntry OBJECT-TYPE Logical Port multicast policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.2.1 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerMulticastStatisticsIfIndex OBJECT-TYPE Ethernet Logical port if-index table key | 1.3.6.1.4.1.2281.10.6.3.10.2.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsClearOnRead OBJECT-TYPE Clear counter statistics after reading. | 1.3.6.1.4.1.2281.10.6.3.10.2.1.2 | NoYes | read-write | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsGreenPacket OBJECT-TYPE The number of packets that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.2.1.3 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsGreenBytes OBJECT-TYPE The number of bytes that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.2.1.4 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsYellowPacket OBJECT-TYPE The number of packets that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.2.1.5 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsYellowBytes OBJECT-TYPE The number of bytes that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.2.1.6 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsRedPacket OBJECT-TYPE The number of packets that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.2.1.7 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerMulticastStatisticsRedBytes OBJECT-TYPE The number of bytes that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.2.1.8 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsTable OBJECT-TYPE Interface Logical Port broadcast policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.3 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsEntry OBJECT-TYPE Interface Logical Port broadcast policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.3.1 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsIfIndex OBJECT-TYPE Ethernet Logical port if-index table key | 1.3.6.1.4.1.2281.10.6.3.10.3.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsClearOnRead OBJECT-TYPE Clear counter statistics after reading. | 1.3.6.1.4.1.2281.10.6.3.10.3.1.2 | NoYes | read-write | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsGreenPacket OBJECT-TYPE The number of packets that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.3.1.3 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsGreenBytes OBJECT-TYPE The number of bytes that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.3.1.4 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsYellowPacket OBJECT-TYPE The number of packets that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.3.1.5 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsYellowBytes OBJECT-TYPE The number of bytes that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.3.1.6 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsRedPacket OBJECT-TYPE The number of packets that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.3.1.7 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerBroadcastStatisticsRedBytes OBJECT-TYPE The number of bytes that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.3.1.8 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsTable OBJECT-TYPE Interface Logical Port ether Type 1 policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.4 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsEntry OBJECT-TYPE Interface Logical Port ether Type 1 policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.4.1 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsIfIndex OBJECT-TYPE Ethernet Logical port if-index table key | 1.3.6.1.4.1.2281.10.6.3.10.4.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsClearOnRead OBJECT-TYPE Clear counter statistics after reading. | 1.3.6.1.4.1.2281.10.6.3.10.4.1.2 | NoYes | read-write | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsGreenPacket OBJECT-TYPE The number of packets that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.4.1.3 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsGreenBytes OBJECT-TYPE The number of bytes that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.4.1.4 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsYellowPacket OBJECT-TYPE The number of packets that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.4.1.5 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsYellowBytes OBJECT-TYPE The number of bytes that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.4.1.6 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsRedPacket OBJECT-TYPE The number of packets that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.4.1.7 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType1StatisticsRedBytes OBJECT-TYPE The number of bytes that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.4.1.8 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsTable OBJECT-TYPE Interface Logical Port ether Type 2 policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.5 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsEntry OBJECT-TYPE Interface Logical Port ether Type 2 policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.5.1 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsIfIndex OBJECT-TYPE Ethernet Logical port if-index table key | 1.3.6.1.4.1.2281.10.6.3.10.5.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsClearOnRead OBJECT-TYPE Clear counter statistics after reading. | 1.3.6.1.4.1.2281.10.6.3.10.5.1.2 | NoYes | read-write | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsGreenPacket OBJECT-TYPE The number of packets that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.5.1.3 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsGreenBytes OBJECT-TYPE The number of bytes that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.5.1.4 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsYellowPacket OBJECT-TYPE The number of packets that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.5.1.5 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsYellowBytes OBJECT-TYPE The number of bytes that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.5.1.6 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsRedPacket OBJECT-TYPE The number of packets that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.5.1.7 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType2StatisticsRedBytes OBJECT-TYPE The number of bytes that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.5.1.8 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsTable OBJECT-TYPE Interface Logical Port ether Type 3 policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.6 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsEntry OBJECT-TYPE Interface Logical Port ether Type 3 policer statistics. | 1.3.6.1.4.1.2281.10.6.3.10.6.1 | not-accessible | mandatory | |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsIfIndex OBJECT-TYPE Ethernet Logical port if-index table key | 1.3.6.1.4.1.2281.10.6.3.10.6.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsClearOnRead OBJECT-TYPE Clear counter statistics after reading. | 1.3.6.1.4.1.2281.10.6.3.10.6.1.2 | NoYes | read-write | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsGreenPacket OBJECT-TYPE The number of packets that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.6.1.3 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsGreenBytes OBJECT-TYPE The number of bytes that were counted as green. | 1.3.6.1.4.1.2281.10.6.3.10.6.1.4 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsYellowPacket OBJECT-TYPE The number of packets that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.6.1.5 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsYellowBytes OBJECT-TYPE The number of bytes that were counted as yellow. | 1.3.6.1.4.1.2281.10.6.3.10.6.1.6 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsRedPacket OBJECT-TYPE The number of packets that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.6.1.7 | Counter64 | read-only | mandatory |
| genEquipPmEthernetIngressPolicerEtherType3StatisticsRedBytes OBJECT-TYPE The number of bytes that were counted as red. | 1.3.6.1.4.1.2281.10.6.3.10.6.1.8 | Counter64 | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTable OBJECT-TYPE Interface physical Port RMON statistics. | 1.3.6.1.4.1.2281.10.6.3.11 | not-accessible | mandatory | |
| genEquipPmEthernetRmonStatisticsEntry OBJECT-TYPE Interface physical Port RMON statistics. | 1.3.6.1.4.1.2281.10.6.3.11.1 | not-accessible | mandatory | |
| genEquipPmEthernetRmonStatisticsIfIndex OBJECT-TYPE Ethernet Physical port if-index table key | 1.3.6.1.4.1.2281.10.6.3.11.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsClearOnRead OBJECT-TYPE Clear on read | 1.3.6.1.4.1.2281.10.6.3.11.1.2 | NoYes | read-write | mandatory |
| genEquipPmEthernetRmonStatisticsTxByteCount OBJECT-TYPE TX byte count | 1.3.6.1.4.1.2281.10.6.3.11.1.3 | Counter64 | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxFrameCount OBJECT-TYPE TX frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.4 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxMulticastFrameCount OBJECT-TYPE TX multicast frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.5 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxBroadcastFrameCount OBJECT-TYPE TX broadcast frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.6 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxControlFrameCount OBJECT-TYPE TX control frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.7 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxPauseFrameCount OBJECT-TYPE TX pause frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.8 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxFcsErrorFrameCount OBJECT-TYPE TX fcs error frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.9 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxLengthErrorFrameCount OBJECT-TYPE TX length error frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.10 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxOversizeFrameCount OBJECT-TYPE TX oversize frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.11 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxUndersizeFrameCount OBJECT-TYPE TX undersize frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.12 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxFragmentFrameCount OBJECT-TYPE TX fragment frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.13 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTxJabberFrameCount OBJECT-TYPE TX jabber frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.14 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTx64FrameCount OBJECT-TYPE TX 64 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.15 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTx65_127FrameCount OBJECT-TYPE TX 65-127 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.16 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTx128_255FrameCount OBJECT-TYPE TX 128-255 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.17 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTx256_511FrameCount OBJECT-TYPE TX 256-511 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.18 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTx512_1023FrameCount OBJECT-TYPE TX 512-1023 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.19 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTx1024_1518FrameCount OBJECT-TYPE TX 1024-1518 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.20 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsTx1519_1522FrameCount OBJECT-TYPE TX 1519-1522 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.21 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxByteCount OBJECT-TYPE RX byte count | 1.3.6.1.4.1.2281.10.6.3.11.1.22 | Counter64 | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxFrameCount OBJECT-TYPE RX frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.23 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxMulticastFrameCount OBJECT-TYPE RX multicast frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.24 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxBroadcastFrameCount OBJECT-TYPE RX broadcast frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.25 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxControlFrameCount OBJECT-TYPE RX control frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.26 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxPauseFrameCount OBJECT-TYPE RX pause frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.27 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxFcsErrorFrameCount OBJECT-TYPE RX fcs error frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.28 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxLengthErrorFrameCount OBJECT-TYPE RX length error frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.29 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxcode_ErrorCount OBJECT-TYPE RX code error count | 1.3.6.1.4.1.2281.10.6.3.11.1.30 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxoversizeFrameCount OBJECT-TYPE RX oversize frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.31 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxundersize_ErrorFrameCount OBJECT-TYPE RX undersize error frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.32 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxFragmentFrameCount OBJECT-TYPE RX fragment frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.33 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRx64FrameCount OBJECT-TYPE RX 64 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.35 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRx65_127FrameCount OBJECT-TYPE RX 65-127 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.36 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRx128_255FrameCount OBJECT-TYPE RX 128-255 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.37 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRx256_511FrameCount OBJECT-TYPE RX 256-511 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.38 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRx512_1023FrameCount OBJECT-TYPE RX 512-1023 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.39 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRx1024_1518FrameCount OBJECT-TYPE RX 1024-1518 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.40 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRx1519_1522FrameCount OBJECT-TYPE RX 1519-1522 frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.41 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxExceedmaxFrameCount OBJECT-TYPE RX exceed max frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.42 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxExceedMaxWithErrorFrameCount OBJECT-TYPE RX exceed max with error frame count | 1.3.6.1.4.1.2281.10.6.3.11.1.43 | Counter | read-only | mandatory |
| genEquipPmEthernetRmonStatisticsRxJabberFrameCount OBJECT-TYPE RX jabber frame count - frames with length > 1518 bytes (1522 bytes for VLAN tagged frames) with errors | 1.3.6.1.4.1.2281.10.6.3.11.1.44 | Counter | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTable OBJECT-TYPE Service queues aggragation statistics. | 1.3.6.1.4.1.2281.10.6.3.12 | not-accessible | mandatory | |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsEntry OBJECT-TYPE Service queues aggragation statistics. | 1.3.6.1.4.1.2281.10.6.3.12.1 | not-accessible | mandatory | |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsIfIndex OBJECT-TYPE ifIndex | 1.3.6.1.4.1.2281.10.6.3.12.1.1 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsServiceIndex OBJECT-TYPE Egress service bundle ID | 1.3.6.1.4.1.2281.10.6.3.12.1.2 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsClearOnRead OBJECT-TYPE clear on read | 1.3.6.1.4.1.2281.10.6.3.12.1.3 | NoYes | read-write | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedGreenPacket OBJECT-TYPE transmitted green packet | 1.3.6.1.4.1.2281.10.6.3.12.1.4 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedGreenBytes OBJECT-TYPE transmitted green bytes | 1.3.6.1.4.1.2281.10.6.3.12.1.5 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedGreenBitsPerSecond OBJECT-TYPE transmitted green bits per second | 1.3.6.1.4.1.2281.10.6.3.12.1.6 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedGreenPacket OBJECT-TYPE dropped green packet | 1.3.6.1.4.1.2281.10.6.3.12.1.7 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedGreenBytes OBJECT-TYPE dropped green bytes | 1.3.6.1.4.1.2281.10.6.3.12.1.8 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedYellowPacket OBJECT-TYPE transmitted yellow packet | 1.3.6.1.4.1.2281.10.6.3.12.1.9 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedYellowBytes OBJECT-TYPE transmitted yellow bytes | 1.3.6.1.4.1.2281.10.6.3.12.1.10 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedYellowBitsPerSecond OBJECT-TYPE transmitted yellow bits per second | 1.3.6.1.4.1.2281.10.6.3.12.1.11 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedYellowPacket OBJECT-TYPE Tdropped yellow packet | 1.3.6.1.4.1.2281.10.6.3.12.1.12 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedYellowBytes OBJECT-TYPE dropped yellow bytes | 1.3.6.1.4.1.2281.10.6.3.12.1.13 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatisticsTable OBJECT-TYPE Cos Service Point ingress Policer statistics. | 1.3.6.1.4.1.2281.10.6.3.13 | not-accessible | mandatory | |
| genEquipServicesCetSpPmCosIngressPolicerStatisticsEntry OBJECT-TYPE Cos Service Point ingress Policer statistics. | 1.3.6.1.4.1.2281.10.6.3.13.1 | not-accessible | mandatory | |
| genEquipServicesCetSpPmCosIngressPolicerStatiServiceIndex OBJECT-TYPE service-index | 1.3.6.1.4.1.2281.10.6.3.13.1.1 | INTEGER | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiSpIndex OBJECT-TYPE sp-index | 1.3.6.1.4.1.2281.10.6.3.13.1.2 | INTEGER | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiCos OBJECT-TYPE cos index | 1.3.6.1.4.1.2281.10.6.3.13.1.3 | INTEGER | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiClearOnRead OBJECT-TYPE Clear on read | 1.3.6.1.4.1.2281.10.6.3.13.1.4 | NoYes | read-write | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiGreenPacket OBJECT-TYPE green-packet | 1.3.6.1.4.1.2281.10.6.3.13.1.5 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiGreenBytes OBJECT-TYPE green-bytes | 1.3.6.1.4.1.2281.10.6.3.13.1.6 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiYellowPacket OBJECT-TYPE yellow-packet | 1.3.6.1.4.1.2281.10.6.3.13.1.7 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiYellowBytes OBJECT-TYPE yellow-bytes | 1.3.6.1.4.1.2281.10.6.3.13.1.8 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiRedPacket OBJECT-TYPE red-packet | 1.3.6.1.4.1.2281.10.6.3.13.1.9 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmCosIngressPolicerStatiRedBytes OBJECT-TYPE red-bytes | 1.3.6.1.4.1.2281.10.6.3.13.1.10 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatisticsTable OBJECT-TYPE Service Point ingress Policer statistics. | 1.3.6.1.4.1.2281.10.6.3.14 | not-accessible | mandatory | |
| genEquipServicesCetSpPmIngressPolicerStatisticsEntry OBJECT-TYPE Service Point ingress Policer statistics. | 1.3.6.1.4.1.2281.10.6.3.14.1 | not-accessible | mandatory | |
| genEquipServicesCetSpPmIngressPolicerStatiServiceIndex OBJECT-TYPE service-index | 1.3.6.1.4.1.2281.10.6.3.14.1.1 | INTEGER | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiSpIndex OBJECT-TYPE sp-index | 1.3.6.1.4.1.2281.10.6.3.14.1.2 | INTEGER | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiClearOnRead OBJECT-TYPE Clear on read | 1.3.6.1.4.1.2281.10.6.3.14.1.3 | NoYes | read-write | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiGreenPacket OBJECT-TYPE green-packet | 1.3.6.1.4.1.2281.10.6.3.14.1.4 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiGreenBytes OBJECT-TYPE green-bytes | 1.3.6.1.4.1.2281.10.6.3.14.1.5 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiYellowPacket OBJECT-TYPE yellow-packet | 1.3.6.1.4.1.2281.10.6.3.14.1.6 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiYellowBytes OBJECT-TYPE yellow-bytes | 1.3.6.1.4.1.2281.10.6.3.14.1.7 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiRedPacket OBJECT-TYPE red-packet | 1.3.6.1.4.1.2281.10.6.3.14.1.8 | Counter64 | read-only | mandatory |
| genEquipServicesCetSpPmIngressPolicerStatiRedBytes OBJECT-TYPE red-bytes | 1.3.6.1.4.1.2281.10.6.3.14.1.9 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsTable OBJECT-TYPE Service Point egress queue statistics. | 1.3.6.1.4.1.2281.10.6.3.15 | not-accessible | mandatory | |
| genEquipServicesCETTmPmSpEgressQueueStatisticsEntry OBJECT-TYPE Service Point egress queue statistics. | 1.3.6.1.4.1.2281.10.6.3.15.1 | not-accessible | mandatory | |
| genEquipServicesCETTmPmSpEgressQueueStatisticsIfIndex OBJECT-TYPE ifindex | 1.3.6.1.4.1.2281.10.6.3.15.1.1 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsServiceIndex OBJECT-TYPE Servic class ID | 1.3.6.1.4.1.2281.10.6.3.15.1.2 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsCosQueueIndex OBJECT-TYPE cos-queue-index | 1.3.6.1.4.1.2281.10.6.3.15.1.3 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsClearOnRead OBJECT-TYPE Clear on read | 1.3.6.1.4.1.2281.10.6.3.15.1.4 | NoYes | read-write | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedGreenPacket OBJECT-TYPE transmitted-green-packet | 1.3.6.1.4.1.2281.10.6.3.15.1.5 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedGreenBytes OBJECT-TYPE transmitted-green-bytes | 1.3.6.1.4.1.2281.10.6.3.15.1.6 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedGreenBitsPerSecond OBJECT-TYPE transmitted-green-bits-per-second | 1.3.6.1.4.1.2281.10.6.3.15.1.7 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsDroppedGreenPacket OBJECT-TYPE dropped-green-packet | 1.3.6.1.4.1.2281.10.6.3.15.1.8 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsDroppedGreenBytes OBJECT-TYPE dropped-green-bytes | 1.3.6.1.4.1.2281.10.6.3.15.1.9 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedYellowPacket OBJECT-TYPE transmitted-yellow-packet | 1.3.6.1.4.1.2281.10.6.3.15.1.10 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedYellowBytes OBJECT-TYPE transmitted-yellow-bytes | 1.3.6.1.4.1.2281.10.6.3.15.1.11 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedYellowBitsPerSecond OBJECT-TYPE transmitted-yellow-bits-per-second | 1.3.6.1.4.1.2281.10.6.3.15.1.12 | INTEGER | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsDroppedYellowPacket OBJECT-TYPE dropped-yellow-packet | 1.3.6.1.4.1.2281.10.6.3.15.1.13 | Counter64 | read-only | mandatory |
| genEquipServicesCETTmPmSpEgressQueueStatisticsDroppedYellowBytes OBJECT-TYPE dropped-yellow-bytes | 1.3.6.1.4.1.2281.10.6.3.15.1.14 | Counter64 | read-only | mandatory |
| genEquipPmUtilization OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.16 | |||
| genEquipPmUtilizationCPU OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.16.1 | |||
| genEquipPmUtilizationCPUAdmin OBJECT-TYPE CPU utilization PM admin | 1.3.6.1.4.1.2281.10.6.3.16.1.1 | EnableDisable | read-write | mandatory |
| genEquipPmUtilizationCPUThreshold OBJECT-TYPE User defined threshold for CPU utilization PM. | 1.3.6.1.4.1.2281.10.6.3.16.1.2 | INTEGER (0..100) | read-write | mandatory |
| genEquipPmUtilizationCPUTable OBJECT-TYPE The CPU Utilization PMs | 1.3.6.1.4.1.2281.10.6.3.16.1.3 | not-accessible | mandatory | |
| genEquipPmUtilizationCPUEntry OBJECT-TYPE The CPU Utilization PMs | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1 | not-accessible | mandatory | |
| genEquipPmUtilizationCPUPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.1 | PmTableType | read-only | mandatory |
| genEquipPmUtilizationCPUInterval OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.2 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationCPUPeakUtilization OBJECT-TYPE Peak CPU utilization of the current interval. | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.3 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationCPUAverageUtilization OBJECT-TYPE Average CPU utilization of the current interval. | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.4 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationCPUMinimumUtilization OBJECT-TYPE Minimal CPU utilization of the current interval. | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.5 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationCPUExceedUtilization OBJECT-TYPE Number of seconds in the current interval when CPU utilization exceeded user defined threshold. | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.6 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationCPUIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.7 | Integrity | read-only | mandatory |
| genEquipPmUtilizationMem OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.16.2 | |||
| genEquipPmUtilizationMemAdmin OBJECT-TYPE Memory utilization PM admin | 1.3.6.1.4.1.2281.10.6.3.16.2.1 | EnableDisable | read-write | mandatory |
| genEquipPmUtilizationMemThreshold OBJECT-TYPE Memory threshold for Ethernet port utilization PM. | 1.3.6.1.4.1.2281.10.6.3.16.2.2 | INTEGER (0..100) | read-write | mandatory |
| genEquipPmUtilizationMemTable OBJECT-TYPE The Memory Utilization PMs | 1.3.6.1.4.1.2281.10.6.3.16.2.3 | not-accessible | mandatory | |
| genEquipPmUtilizationMemEntry OBJECT-TYPE The Memory Utilization PMs | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1 | not-accessible | mandatory | |
| genEquipPmUtilizationMemPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.1 | PmTableType | read-only | mandatory |
| genEquipPmUtilizationMemInterval OBJECT-TYPE The interval of the PM | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.2 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationMemPeakUtilization OBJECT-TYPE Peak Memory utilization of the current interval. | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.3 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationMemAverageUtilization OBJECT-TYPE Average Memory utilization of the current interval. | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.4 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationMemMinimumUtilization OBJECT-TYPE Number of seconds in current interval when Memory utilization exceeded the user defined threshold. | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.5 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationMemExceedUtilization OBJECT-TYPE Number of seconds in current interval when Memory utilization exceeded the user defined threshold. | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.6 | INTEGER | read-only | mandatory |
| genEquipPmUtilizationMemIDF OBJECT-TYPE This value indicates if the IDF (Invalid Data Flag), was set. | 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.7 | Integrity | read-only | mandatory |
| genEquipPmEthernet OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.3.17 | |||
| genEquipPmEthernetPortTable OBJECT-TYPE PM on Ethernet port counters. | 1.3.6.1.4.1.2281.10.6.3.17.1 | not-accessible | mandatory | |
| genEquipPmEthernetPortEntry OBJECT-TYPE PM on Ethernet port counters entry. | 1.3.6.1.4.1.2281.10.6.3.17.1.1 | not-accessible | mandatory | |
| genEquipPmEthernetPortPmType OBJECT-TYPE This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours | 1.3.6.1.4.1.2281.10.6.3.17.1.1.1 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortPmInterval OBJECT-TYPE The number of the interval: 1-30 in case the interval is 24 hours or 1-96 in case the interval is 15 minutes | 1.3.6.1.4.1.2281.10.6.3.17.1.1.2 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxAvgBcastPackets OBJECT-TYPE Average received broadcast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.3 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxPeakBcastPackets OBJECT-TYPE Peak received broadcast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.4 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxBytesLayer1ExcedThSecCnt OBJECT-TYPE Counter of seconds in interval when received bytes in Layer1 exceeded threshold | 1.3.6.1.4.1.2281.10.6.3.17.1.1.5 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxAvgBytesLayer1 OBJECT-TYPE Average received bytes in Layer1 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.6 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxPeakBytesLayer1 OBJECT-TYPE Peak received bytes in Layer1 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.7 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxAvgBytesLayer2 OBJECT-TYPE Average received bytes in Layer2 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.8 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxPeakBytesLayer2 OBJECT-TYPE Peak received bytes in Layer2 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.9 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxAvgMcastPackets OBJECT-TYPE Average received multicast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.10 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxPeakMcastPackets OBJECT-TYPE Peak received multicast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.11 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxAvgPackets OBJECT-TYPE Average received packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.12 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortRxPeakPackets OBJECT-TYPE Peak received packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.13 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxAvgBcastPackets OBJECT-TYPE Average transmitted broadcast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.14 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxPeakBcastPackets OBJECT-TYPE Peak transmitted broadcast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.15 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxBytesLayer1ExcedThSecCnt OBJECT-TYPE Counter of seconds in interval when transmitted bytes in Layer1 exceeded threshold | 1.3.6.1.4.1.2281.10.6.3.17.1.1.16 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxAvgBytesLayer1 OBJECT-TYPE Average transmitted bytes in Layer1 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.17 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxPeakBytesLayer1 OBJECT-TYPE Peak transmitted bytes in Layer1 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.18 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxAvgBytesLayer2 OBJECT-TYPE Average transmitted bytes in Layer2 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.19 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxPeakBytesLayer2 OBJECT-TYPE Peak transmitted bytes in Layer2 | 1.3.6.1.4.1.2281.10.6.3.17.1.1.20 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxAvgMcastPackets OBJECT-TYPE Average transmitted multicast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.21 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxPeakMcastPackets OBJECT-TYPE Peak transmitted multicast packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.22 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxAvgPackets OBJECT-TYPE Average transmitted packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.23 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortTxPeakPackets OBJECT-TYPE Peak transmitted packets | 1.3.6.1.4.1.2281.10.6.3.17.1.1.24 | INTEGER | read-only | mandatory |
| genEquipPmEthernetPortPmIDF OBJECT-TYPE Indicates if the performance values of the interval can be trusted | 1.3.6.1.4.1.2281.10.6.3.17.1.1.25 | INTEGER | read-only | mandatory |
| genEquipPMStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.2281.10.6.4 | |||
| genEquipRMONResetCounters OBJECT-TYPE Clear all Ethernet RMON counters. | 1.3.6.1.4.1.2281.10.6.4.1 | OffOn | read-write | mandatory |
| genEquipPMStatisticsResetAllL2PortPm OBJECT-TYPE Clear all L2 port PMs. | 1.3.6.1.4.1.2281.10.6.4.2 | OffOn | read-write | mandatory |