MIBs Depot

MWRM-RADIO-MIB

Registered at
1.3.6.1.4.1.2281.10.5
1.3.6.1.4.1.2281.10.7
Namespace
ceraos
Source file
MWRM-RADIO-MIB
Digest
sha256:a8b336807c0bcbd356049d1a102993f8e8c8ccdf82ecf46d9a9d7f6b22905911

Imports

FromSymbols
MWRM-UNIT-MIBAllowedNotAllowed, BerLevel, ClockSrc, DownUp, EnableDisable, EnableDisableSMI2, GreenYellow, HalfFull, InputSeverity, Integrity, LoopbackType, MetricImperial, NoYes, OffOn, PmTableType, ProgressStatus, QueueName, RadioId, RateMbps, RfuId, Severity, SignalLevel, SlotId, SupportedNotsupported, SwCommand, SwCommandTimer, TrailIfType, TrailProtectedType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
MWRM-RADIO-MIB
MWRM-UNIT-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CommunicationChannel
type
Copy2mate
type
EnhancedHCExclRuleType
type
FalseTrue
type
HcModeType
type
HcType
type
MrmcBitRate
type
MrmcProfile
type
MrmcScriptId
type
MuteOnOff
type
QamOrder
type
RFUSoftwareInstallStat
type
RadioProtectionCmd
type
RfuGrade
type
RfuMajorType
type
ThresholdExponent
type
WaysideBandwidth
type
XpicState
type

Objects

NameOIDSyntaxAccessStatus
microwave_radio
OBJECT-IDENTITY
1.3.6.1.4.1.2281
genEquip
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10
genEquipUnit
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.1
genEquipRFU
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.5
genEquipRfuStatusTable
OBJECT-TYPE
This table indicates the RFU Status Data.
1.3.6.1.4.1.2281.10.5.1not-accessiblemandatory
genEquipRfuStatusEntry
OBJECT-TYPE
Entry containing the data of the RFU.
1.3.6.1.4.1.2281.10.5.1.1not-accessiblemandatory
genEquipRfuStatusId
OBJECT-TYPE
This value indicates an index of a specific RFU
1.3.6.1.4.1.2281.10.5.1.1.1RfuIdread-onlymandatory
genEquipRfuStatusRxLevel
OBJECT-TYPE
This value indicates the RFU Receive Level Status.
1.3.6.1.4.1.2281.10.5.1.1.2INTEGER (-199..0)read-onlymandatory
genEquipRfuStatusTxLevel
OBJECT-TYPE
This value indicates the RFU Transmit Level Status.
1.3.6.1.4.1.2281.10.5.1.1.3INTEGER (-99..34)read-onlymandatory
genEquipRfuStatusTemperature
OBJECT-TYPE
This value indicates the RFU temperature. The value depends on the represented measurement system. with genEquipUnitMeasurementSystem parameter.
1.3.6.1.4.1.2281.10.5.1.1.4INTEGERread-onlymandatory
genEquipRfuStatusRunningVersion
OBJECT-TYPE
This value indicates the running SW version on the RFU.
1.3.6.1.4.1.2281.10.5.1.1.5DisplayStringread-onlymandatory
genEquipRfuStatusRFUType
OBJECT-TYPE
The different types of the supported RFUs
1.3.6.1.4.1.2281.10.5.1.1.6INTEGER {unknown(2), rfu-1500p(32), rfu-1500hp(34), rfu-c(38), rfu-h(39), rfu-1500sp(40), rfu-hp(41), rfu-a(42), rfu-d(43)}read-onlymandatory
genEquipRfuStatusRFUGrade
OBJECT-TYPE
The grade of the RFU
1.3.6.1.4.1.2281.10.5.1.1.7RfuGraderead-onlymandatory
genEquipRfuStatusTxRxFreqSeparation
OBJECT-TYPE
Tx to Rx frequency separation (MHz), For some RFUs the user cannot set the Tx and Rx frequencies separately (one of them affects the other one's value).
1.3.6.1.4.1.2281.10.5.1.1.8INTEGERread-onlymandatory
genEquipRfuStatusRFUMode
OBJECT-TYPE
IF combining parameter - The mode of the RFU
1.3.6.1.4.1.2281.10.5.1.1.9INTEGER {main(2), diversity(3), combined(4)}read-onlymandatory
genEquipRfuStatusRxLevelDiversity
OBJECT-TYPE
IF combining parameter - The Rx Diversity level (dBm)
1.3.6.1.4.1.2281.10.5.1.1.10INTEGER (-199..0)read-onlymandatory
genEquipRfuStatusRxLevelCombined
OBJECT-TYPE
IF combining parameter - The Rx Combined level (dBm)
1.3.6.1.4.1.2281.10.5.1.1.11INTEGER (-199..0)read-onlymandatory
genEquipRfuStatusAutoDelayCalStatus
OBJECT-TYPE
IF combining parameter - the automatic delay calibration status. Supported only for specific RFUs.
1.3.6.1.4.1.2281.10.5.1.1.12INTEGER {no-action(2), pass(3), error(4)}read-onlymandatory
genEquipRfuStatusRFUSerialNumber
OBJECT-TYPE
RFU Serial number.
1.3.6.1.4.1.2281.10.5.1.1.13DisplayStringread-onlymandatory
genEquipRfuStatusRFUPartNumber
OBJECT-TYPE
RFU Part number.
1.3.6.1.4.1.2281.10.5.1.1.14DisplayStringread-onlymandatory
genEquipRfuStatusRFUmateCarrier
OBJECT-TYPE
The returned value indicates the slot number of the 'copartner RFU-D carrier'. The returned value will be '-1' when the RFU is not RFU-D, or if the 'copartner RFU-D' carrier is not found.
1.3.6.1.4.1.2281.10.5.1.1.15INTEGERread-onlymandatory
genEquipRfuStatusRFUMaxTxFreq
OBJECT-TYPE
The maximum Tx frequency of the RFU that is allowed by the RFU.
1.3.6.1.4.1.2281.10.5.1.1.16INTEGERread-onlymandatory
genEquipRfuStatusRFUMinTxFreq
OBJECT-TYPE
The minimum Tx frequency of the RFU that is allowed by the RFU.
1.3.6.1.4.1.2281.10.5.1.1.17INTEGERread-onlymandatory
genEquipRfuStatusRFUMaxRxFreq
OBJECT-TYPE
The maximum Rx frequency of the RFU that is allowed by the RFU.
1.3.6.1.4.1.2281.10.5.1.1.18INTEGERread-onlymandatory
genEquipRfuStatusRFUMinRxFreq
OBJECT-TYPE
The minimum Rx frequency of the RFU that is allowed by the RFU.
1.3.6.1.4.1.2281.10.5.1.1.19INTEGERread-onlymandatory
genEquipRfuStatusInstallation
OBJECT-TYPE
Returns 'all-indoor' or 'split' according to the RFU installation.
1.3.6.1.4.1.2281.10.5.1.1.20INTEGER {split-mount(0), all-indoor(1)}read-onlymandatory
genEquipRfuStatusDataSciErrors
OBJECT-TYPE
Data Sci Errors
1.3.6.1.4.1.2281.10.5.1.1.21INTEGERread-onlymandatory
genEquipRfuStatusDeviceError
OBJECT-TYPE
Status Device Error
1.3.6.1.4.1.2281.10.5.1.1.22INTEGERread-onlymandatory
genEquipRfuStatusBand
OBJECT-TYPE
The Band of the RF-Module in GHz
1.3.6.1.4.1.2281.10.5.1.1.23INTEGER {unknown(0), band-18(2), band-23(3), band-26(4), band-28(5), band-38(6), band-29(7), band-31(8), band-15(9), band-13(10), band-10dot5-11(11), band-7-8(12), band-6L-6H(13), band-32(14)}read-onlymandatory
genEquipRfuStatusPATemp
OBJECT-TYPE
The measured temperature in celsius of the PA (Power Amplifier) of the RF module
1.3.6.1.4.1.2281.10.5.1.1.24INTEGERread-onlymandatory
genEquipRfuStatusTxMute
OBJECT-TYPE
The mute status, whether it is on (mute) or off (un-mute) of the RF-Module
1.3.6.1.4.1.2281.10.5.1.1.25OffOnread-onlymandatory
genEquipRfuStatusMinTxLevel
OBJECT-TYPE
The minimum feasible TX signal level (TSL) in dBm of the RF-Module
1.3.6.1.4.1.2281.10.5.1.1.26INTEGERread-onlymandatory
genEquipRfuStatusMaxTxLevel
OBJECT-TYPE
The maximum feasible TX signal level (TSL) in dBm of the RF-Module
1.3.6.1.4.1.2281.10.5.1.1.27INTEGERread-onlymandatory
genEquipRfuStatusMinBW
OBJECT-TYPE
The minimum supported bandwidth in KHz of the RF-Module
1.3.6.1.4.1.2281.10.5.1.1.28INTEGERread-onlymandatory
genEquipRfuStatusMaxBW
OBJECT-TYPE
The maximum supported bandwidth in KHz of the RF-Module
1.3.6.1.4.1.2281.10.5.1.1.29INTEGERread-onlymandatory
genEquipRfuStatusCommunication
OBJECT-TYPE
The communication status between the host and the RFU
1.3.6.1.4.1.2281.10.5.1.1.30DownUpread-onlymandatory
genEquipRfuCfgATPCOverrideTimerState
OBJECT-TYPE
Returns the state of the ATPC 'override timer', whether it is regular or expired
1.3.6.1.4.1.2281.10.5.1.1.31INTEGER {normal(0), expired(1)}read-onlymandatory
genEquipRfuStatusIfCombSupport
OBJECT-TYPE
Indicates if the IF-Combiner function is supported
1.3.6.1.4.1.2281.10.5.1.1.32SupportedNotsupportedread-onlymandatory
genEquipRfuStatusMinRxLevel
OBJECT-TYPE
The minimum feasible RX signal level (RSL) in dBm of the RF-Module
1.3.6.1.4.1.2281.10.5.1.1.33INTEGERread-onlymandatory
genEquipRfuStatusMaxRxLevel
OBJECT-TYPE
The maximum feasible RX signal level (RSL) in dBm of the RF-Module
1.3.6.1.4.1.2281.10.5.1.1.34INTEGERread-onlymandatory
genEquipRfuCfgTable
OBJECT-TYPE
This table indicates the RFU Configuration.
1.3.6.1.4.1.2281.10.5.2not-accessiblemandatory
genEquipRfuCfgEntry
OBJECT-TYPE
This table indicates the RFU Configuration.
1.3.6.1.4.1.2281.10.5.2.1not-accessiblemandatory
genEquipRfuCfgId
OBJECT-TYPE
This value indicates an index of a specific RFU
1.3.6.1.4.1.2281.10.5.2.1.1RfuIdread-onlymandatory
genEquipRfuCfgMaxTxLevel
OBJECT-TYPE
This value indicates the RFU Maximum Transmit Level Configuration.
1.3.6.1.4.1.2281.10.5.2.1.2INTEGER (-50..34)read-writemandatory
genEquipRfuCfgTxFreq
OBJECT-TYPE
Tx Frequency configuration (Mhz)
1.3.6.1.4.1.2281.10.5.2.1.3INTEGERread-writemandatory
genEquipRfuCfgRxFreq
OBJECT-TYPE
Rx Frequency configuration (Mhz)
1.3.6.1.4.1.2281.10.5.2.1.4INTEGERread-writemandatory
genEquipRfuCfgATPCAdmin
OBJECT-TYPE
ATPC configuration - Admin mode Possible values: - enable(2) - disable(3)
1.3.6.1.4.1.2281.10.5.2.1.5EnableDisableread-writemandatory
genEquipRfuCfgATPCRefRSL
OBJECT-TYPE
ATPC configuration - reference RSL level (dBm)
1.3.6.1.4.1.2281.10.5.2.1.6INTEGER (-70..-30)read-writemandatory
genEquipRfuCfgMuteTx
OBJECT-TYPE
The required TX mute status of the RF-Module
1.3.6.1.4.1.2281.10.5.2.1.7MuteOnOffread-writemandatory
genEquipRfuCfgRSLConnSrc
OBJECT-TYPE
IF combining - RFU RSL (Received Signal Level) connector source
1.3.6.1.4.1.2281.10.5.2.1.8INTEGER {main(2), diversity(3)}read-writemandatory
genEquipRfuCfgDelayCal
OBJECT-TYPE
IF combining - Delay calibration
1.3.6.1.4.1.2281.10.5.2.1.9INTEGER (-130..130)read-writemandatory
genEquipRfuCfgLoopback
OBJECT-TYPE
RFU RF loopback command
1.3.6.1.4.1.2281.10.5.2.1.10INTEGER {off(0), towardsSystem(1)}read-writemandatory
genEquipRfuCfgLogAdmin
OBJECT-TYPE
RFU internal log file admin Possible values: - enable(2) - disable(3)
1.3.6.1.4.1.2281.10.5.2.1.11EnableDisableread-writemandatory
genEquipRfuCfgClearComDeviceError
OBJECT-TYPE
Clear Com device Error.
1.3.6.1.4.1.2281.10.5.2.1.12OffOnread-writemandatory
genEquipRfuCfgGreenModeAdmin
OBJECT-TYPE
Enables/disables RFU green mode. This mode will minimize power consumption while ensuring the highest transmission power possible to get an RSL not higher than defined in the reference level genEquipRfuCfgGreenModeReferenceLevel
1.3.6.1.4.1.2281.10.5.2.1.13EnableDisableread-writemandatory
genEquipRfuCfgGreenModeReferenceLevel
OBJECT-TYPE
RSL reference level (in dB) for green mode operation
1.3.6.1.4.1.2281.10.5.2.1.14INTEGER (-70..-30)read-writemandatory
genEquipRfuCfgATPCOverrideTxLevel
OBJECT-TYPE
This parameter configures the default transmission signal level in case of ATPC override due to expiration of maximum power timer as defined in genEquipRfuCfgATPCOverrideTimeout.
1.3.6.1.4.1.2281.10.5.2.1.15INTEGER (-50..34)read-writemandatory
genEquipRfuCfgATPCOverrideTimeout
OBJECT-TYPE
This parameter configures the timer to be counted while in ATPC in case of maximum power transmission. If this timer expires, the system will transmit at a default level defined in genEquipRfuCfgATPCOverrideTxLevel
1.3.6.1.4.1.2281.10.5.2.1.16INTEGER (0..600)read-writemandatory
genEquipRfuCfgATPCOverrideTimerCounter
OBJECT-TYPE
This parameter shows the time left in the timer defined by genEquipRfuCfgATPCOverrideTxLevel
1.3.6.1.4.1.2281.10.5.2.1.17INTEGER (0..600)read-onlymandatory
genEquipRfuCfgATPCOverrideTimerCancel
OBJECT-TYPE
Setting this parameter to ON will cancel the ATPC override mode. This will only be effective while in this mode i.e. the system had been transmitting at maximum power for a time longer than defined in genEquipRfuCfgATPCOverrideTxLevel and now is transmitting at the default level defined in genEquipRfuCfgATPCOverrideTxLevel. Following execution, the system will go back to normal ATPC operating mode
1.3.6.1.4.1.2281.10.5.2.1.18OffOnread-writemandatory
genEquipRfuUploadTable
OBJECT-TYPE
RFU Upload Data table.
1.3.6.1.4.1.2281.10.5.3not-accessiblemandatory
genEquipRfuUploadEntry
OBJECT-TYPE
Entry containing the data of the RFU.
1.3.6.1.4.1.2281.10.5.3.1not-accessiblemandatory
genEquipRfuUploadId
OBJECT-TYPE
This value indicates an index of a specific RFU
1.3.6.1.4.1.2281.10.5.3.1.1RadioIdread-onlymandatory
genEquipRfuUploadSwCommand
OBJECT-TYPE
This value initiates SW upload to the RFU.
1.3.6.1.4.1.2281.10.5.3.1.2INTEGER {uploadSW(1), noOperation(2)}read-writemandatory
genEquipRfuUploadSwStatus
OBJECT-TYPE
This value indicates the status of the SW load operation on the RFU.
1.3.6.1.4.1.2281.10.5.3.1.3INTEGER {noLoad(0), loadError(1), loadStart(2), loadSendBlock(3), loadDone(5)}read-onlymandatory
genEquipRfuUploadCounter
OBJECT-TYPE
This parameter shows the progress (in blocks) of RFU software download
1.3.6.1.4.1.2281.10.5.3.1.4INTEGERread-onlymandatory
genEquipRFUNG
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.5.4
genEquipRfuSwInstallTable
OBJECT-TYPE
RFU software managemet install configuration.
1.3.6.1.4.1.2281.10.5.4.2not-accessiblemandatory
genEquipRfuSwInstallEntry
OBJECT-TYPE
RFU software managemet install configuration.
1.3.6.1.4.1.2281.10.5.4.2.1not-accessiblemandatory
genEquipRfuSwInstallIfIndex
OBJECT-TYPE
RFU ifIndex
1.3.6.1.4.1.2281.10.5.4.2.1.1INTEGERread-onlymandatory
genEquipRfuSwInstallOperation
OBJECT-TYPE
RFU software installation operation to be performed.
1.3.6.1.4.1.2281.10.5.4.2.1.2INTEGER {no-operation(0), update-version-from-bundle(1), install-existing-version(2), abort-timer(3)}read-writemandatory
genEquipRfuSwInstallTimedInstallation
OBJECT-TYPE
Determines whether the installation will be carried out after a configured timer.
1.3.6.1.4.1.2281.10.5.4.2.1.3NoYesread-writemandatory
genEquipRfuSwInstallTimer
OBJECT-TYPE
Timer for timed installations
1.3.6.1.4.1.2281.10.5.4.2.1.4INTEGERread-writemandatory
genEquipRfuInstalledVersionsTable
OBJECT-TYPE
RFU software managemet installed versuion.
1.3.6.1.4.1.2281.10.5.4.3not-accessiblemandatory
genEquipRfuInstalledVersionsEntry
OBJECT-TYPE
RFU software managemet installed version.
1.3.6.1.4.1.2281.10.5.4.3.1not-accessiblemandatory
genEquipRfuInstalledVersionsIfIndex
OBJECT-TYPE
RFU ifIndex
1.3.6.1.4.1.2281.10.5.4.3.1.1INTEGERread-onlymandatory
genEquipRfuInstalledVersionsDSP
OBJECT-TYPE
RFU version DSP.
1.3.6.1.4.1.2281.10.5.4.3.1.2DisplayStringread-onlymandatory
genEquipRfuInstalledVersionsConfigurations
OBJECT-TYPE
Configuration tables.
1.3.6.1.4.1.2281.10.5.4.3.1.3DisplayStringread-onlymandatory
genEquipRfuInstalledVersionsConstants
OBJECT-TYPE
Constant tables
1.3.6.1.4.1.2281.10.5.4.3.1.4DisplayStringread-onlymandatory
genEquipRfuInstalledVersionsScripts
OBJECT-TYPE
RFU scripts
1.3.6.1.4.1.2281.10.5.4.3.1.5DisplayStringread-onlymandatory
genEquipRfuInstalledVersionsFirmware
OBJECT-TYPE
Firmware
1.3.6.1.4.1.2281.10.5.4.3.1.6DisplayStringread-onlymandatory
genEquipRfuSwStatusTable
OBJECT-TYPE
RFU software managemet installed status.
1.3.6.1.4.1.2281.10.5.4.4not-accessiblemandatory
genEquipRfuSwStatusEntry
OBJECT-TYPE
RFU software managemet installed status.
1.3.6.1.4.1.2281.10.5.4.4.1not-accessiblemandatory
genEquipRfuSwStatusIfIndex
OBJECT-TYPE
RFU ifIndex
1.3.6.1.4.1.2281.10.5.4.4.1.1INTEGERread-onlymandatory
genEquipRfuSwStatusCurrentState
OBJECT-TYPE
Current state of the install operation.
1.3.6.1.4.1.2281.10.5.4.4.1.2RFUSoftwareInstallStatread-onlymandatory
genEquipRfuSwStatusProgress
OBJECT-TYPE
Progress of the current install operation in percentage.
1.3.6.1.4.1.2281.10.5.4.4.1.3INTEGERread-onlymandatory
genEquipRfuRunningVersionsTable
OBJECT-TYPE
RFU software managemet rinning versions.
1.3.6.1.4.1.2281.10.5.4.5not-accessiblemandatory
genEquipRfuRunningVersionsEntry
OBJECT-TYPE
RFU software managemet running versions.
1.3.6.1.4.1.2281.10.5.4.5.1not-accessiblemandatory
genEquipRfuRunningVersionsIfIndex
OBJECT-TYPE
RFU ifIndex
1.3.6.1.4.1.2281.10.5.4.5.1.1INTEGERread-onlymandatory
genEquipRfuRunningVersionsDSP
OBJECT-TYPE
DSP.
1.3.6.1.4.1.2281.10.5.4.5.1.2DisplayStringread-onlymandatory
genEquipRfuRunningVersionsConfigurations
OBJECT-TYPE
Configuration tables.
1.3.6.1.4.1.2281.10.5.4.5.1.3DisplayStringread-onlymandatory
genEquipRfuRunningVersionsConstants
OBJECT-TYPE
Constant tables.
1.3.6.1.4.1.2281.10.5.4.5.1.4DisplayStringread-onlymandatory
genEquipRfuRunningVersionsScripts
OBJECT-TYPE
RFU scripts.
1.3.6.1.4.1.2281.10.5.4.5.1.5DisplayStringread-onlymandatory
genEquipRfuRunningVersionsFirmware
OBJECT-TYPE
Firmware.
1.3.6.1.4.1.2281.10.5.4.5.1.6DisplayStringread-onlymandatory
genEquipRfuAvailableVersionsTable
OBJECT-TYPE
RFU software managemet available versions.
1.3.6.1.4.1.2281.10.5.4.6not-accessiblemandatory
genEquipRfuAvailableVersionsEntry
OBJECT-TYPE
RFU software managemet available versions.
1.3.6.1.4.1.2281.10.5.4.6.1not-accessiblemandatory
genEquipRfuAvailableVersionsRfuType
OBJECT-TYPE
RFU Type
1.3.6.1.4.1.2281.10.5.4.6.1.1RfuMajorTyperead-onlymandatory
genEquipRfuAvailableVersionsDSP
OBJECT-TYPE
DSP.
1.3.6.1.4.1.2281.10.5.4.6.1.2DisplayStringread-onlymandatory
genEquipRfuAvailableVersionsConfigurations
OBJECT-TYPE
Configuration tables.
1.3.6.1.4.1.2281.10.5.4.6.1.3DisplayStringread-onlymandatory
genEquipRfuAvailableVersionsConstants
OBJECT-TYPE
Constant tables.
1.3.6.1.4.1.2281.10.5.4.6.1.4DisplayStringread-onlymandatory
genEquipRfuAvailableVersionsScripts
OBJECT-TYPE
RFU scripts.
1.3.6.1.4.1.2281.10.5.4.6.1.5DisplayStringread-onlymandatory
genEquipRfuAvailableVersionsFirmware
OBJECT-TYPE
Firmware.
1.3.6.1.4.1.2281.10.5.4.6.1.6DisplayStringread-onlymandatory
genEquipRadio
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7
genEquipRadioStatusTable
OBJECT-TYPE
Radio status table
1.3.6.1.4.1.2281.10.7.1not-accessiblemandatory
genEquipRadioStatusEntry
OBJECT-TYPE
Radio status table
1.3.6.1.4.1.2281.10.7.1.1not-accessiblemandatory
genEquipRadioStatusRadioId
OBJECT-TYPE
This value is the radio ID that serves as the table Index.
1.3.6.1.4.1.2281.10.7.1.1.1RadioIdread-onlymandatory
genEquipRadioStatusMSE
OBJECT-TYPE
MSE (Mean Square Error) of the Rx signal (measured in dB * 100). -9900 value (-99.00 dB) means that the signal is not locked. ~ -3500 value (-35.00 dB) is a good MSE.
1.3.6.1.4.1.2281.10.7.1.1.2INTEGERread-onlymandatory
genEquipRadioStatusDefectedBlocks
OBJECT-TYPE
The number of counted defective radio blocks.
1.3.6.1.4.1.2281.10.7.1.1.3INTEGERread-onlymandatory
genEquipRadioStatusBER
OBJECT-TYPE
The measured BER (Bit Error Rate) level of the modem.
1.3.6.1.4.1.2281.10.7.1.1.4ThresholdExponentread-onlymandatory
genEquipRadioStatusXPI
OBJECT-TYPE
XPI (Cross Polar Interference) level measured by the modem.
1.3.6.1.4.1.2281.10.7.1.1.5INTEGERread-onlymandatory
genEquipRadioStatusXPICEnabled
OBJECT-TYPE
This parameter indicates whether an XPIC script is currently loaded.
1.3.6.1.4.1.2281.10.7.1.1.6EnableDisableSMI2read-onlymandatory
genEquipRadioCfgTable
OBJECT-TYPE
Radio Configuration table.
1.3.6.1.4.1.2281.10.7.2not-accessiblemandatory
genEquipRadioCfgEntry
OBJECT-TYPE
Radio Configuration table.
1.3.6.1.4.1.2281.10.7.2.1not-accessiblemandatory
genEquipRadioCfgRadioId
OBJECT-TYPE
This value is the radio ID that serves as this table Index
1.3.6.1.4.1.2281.10.7.2.1.1RadioIdread-onlymandatory
genEquipRadioCfgLinkId
OBJECT-TYPE
Radio configuration link ID
1.3.6.1.4.1.2281.10.7.2.1.2INTEGER (1..65535)read-writemandatory
genEquipRadioCfgMACHeaderCompression
OBJECT-TYPE
The Admin state of the MAC header compression.
1.3.6.1.4.1.2281.10.7.2.1.3EnableDisableread-writemandatory
genEquipRadioCfgClearCounters
OBJECT-TYPE
Setting this parameter to ON will clear the radio counters.
1.3.6.1.4.1.2281.10.7.2.1.4OffOnread-writemandatory
genEquipRadioCfgIfLoopback
OBJECT-TYPE
The administrative state of the IF loopback.
1.3.6.1.4.1.2281.10.7.2.1.5INTEGER {off(0), towardsSystem(1)}read-writemandatory
genEquipRadioCfgExcessiveBERThreshold
OBJECT-TYPE
The BER threshold that when exceeded will be considered as 'Excessive BER'.
1.3.6.1.4.1.2281.10.7.2.1.6ThresholdExponentread-writemandatory
genEquipRadioCfgSignalDegradeThreshold
OBJECT-TYPE
The BER (Bit Error Rate) threshold that when exceeded will be considered as 'Signal Degrade'.
1.3.6.1.4.1.2281.10.7.2.1.7ThresholdExponentread-writemandatory
genEquipRadioCfgRadioAdmin
OBJECT-TYPE
Radio Admin state (Enable,Disable) can be used in ifTable::ifAdminStatus
1.3.6.1.4.1.2281.10.7.2.1.8EnableDisableread-writeobsolete
genEquipRadioCfgRadioOperationalStatus
OBJECT-TYPE
The operational status of the radio interface.
1.3.6.1.4.1.2281.10.7.2.1.9DownUpread-onlymandatory
genEquipRadioCfgRadioTrafficPriorityScheme
OBJECT-TYPE
this parameter configures the relative priority of different traffic streams. High-tdm-over-high-ethernet gives priorities as follows: (1) TDM high priority (2) Ethernet high priority (3) TDM low priority (4) Etherenet low priority. High-Ethernet-over-tdm gives priorities as follows: (1) Ethernet high priority (2) TDM high priority (3) TDM low priority (4) Etherenet low priority. Tdm-over-ethernet gives priorities as follows: (1) TDM high priority (2) TDM low priority (3) Ethernet
1.3.6.1.4.1.2281.10.7.2.1.10INTEGER {high-tdm-over-ethernet(0), high-ethernet-over-tdm(1), high-tdm-over-high-ethernet(2)}read-writemandatory
genEquipRadioCfgRadioHiPriorityEthernetBW
OBJECT-TYPE
this parameter configures the amount of bandwith reserved for high-priority Ethernet. It must be a number in resolution of 2.048 Mbit/s for E1 systems or 1.544 Mbit/s for T1 systems. The maximum possible capacity is given by genEquipRadioCfgRadioCurrentAvailableCapacity
1.3.6.1.4.1.2281.10.7.2.1.11INTEGER (0..500000)read-writemandatory
genEquipRadioCfgRadioMultiRadioEnable
OBJECT-TYPE
this parameter enables/disables the multi-radio feature for this radio. Notice that for the feature to work it must be configured in two adjacent radios (odd and even slots)
1.3.6.1.4.1.2281.10.7.2.1.12EnableDisableread-writemandatory
genEquipRadioCfgRadioMultiRadioBlockLocalTraffic
OBJECT-TYPE
this parameter allows stopping distribution of data to different radios in Multi-Radio mode for debugging purposes
1.3.6.1.4.1.2281.10.7.2.1.13INTEGER {dont-block(0), block-this-radio(1)}read-writemandatory
genEquipRadioCfgRadioMultiRadioBlockMateTraffic
OBJECT-TYPE
this parameter allows stopping distribution of data to the radio in the mate IDU in Multi-Radio mode for debugging purposes
1.3.6.1.4.1.2281.10.7.2.1.14INTEGER {dont-block(0), block-this-radio(1)}read-writemandatory
genEquipRadioCfgRadioCurrentAvailableCapacity
OBJECT-TYPE
This parameter indicates the maximum possible capacity available for Ethernet. This sets a top limit for amount of high-priority Ethernet bandwidth
1.3.6.1.4.1.2281.10.7.2.1.15INTEGERread-onlymandatory
genEquipRadioCfgRadioMultiRadioExcessiveBERAdmin
OBJECT-TYPE
This parameter configures whether in Multi-Radio mode data stops being distributed to the radio in case of an excessive BER condition
1.3.6.1.4.1.2281.10.7.2.1.16EnableDisableread-writemandatory
genEquipRadioCfgRadioMultiRadioSignalDegradeAdmin
OBJECT-TYPE
This parameter configures whether in Multi-Radio mode data stops being distributed to the radio in case of a signal degraded condition
1.3.6.1.4.1.2281.10.7.2.1.17EnableDisableread-writemandatory
genEquipRadioCfgEnAlarmGenOnRslDegrade
OBJECT-TYPE
TEnable/Disable alarm and trapgeneration on RSL degradationbelow user defined threshold.If enabled, trap and alarm willbe generated when current RSLlevel degrades below userdefined threshold for 5subsequent seconds. Alarm willbe cleared after RSL level staysabove the threshold for at leastanother 5 seconds. Thresholdis calculated as a nominal RSLlevel minus the degradationmargin.
1.3.6.1.4.1.2281.10.7.2.1.18EnableDisableread-writemandatory
genEquipRadioCfgAlarmGenRslNominalLevel
OBJECT-TYPE
RSL nominal level [in dBm] foralarm and event generation.
1.3.6.1.4.1.2281.10.7.2.1.19INTEGER (-100..0)read-writemandatory
genEquipRadioCfgAlarmGenRslDegradationMargin
OBJECT-TYPE
RSL degradation margin [in dB]for alarm and eventgeneration. The margin isrelative to the nominal RSLlevel
1.3.6.1.4.1.2281.10.7.2.1.20INTEGER (10..30)read-writemandatory
genEquipRadioCfgLinkShutDownOnRadioFailure
OBJECT-TYPE
This parameter enables shutting down the link and initiating automatic state propagation upon a failure in each one of the radios. Radio failure condition is determined by user configurations and can be one of the following: Radio LOF, Link ID mismatch, Radio excessive BER, Radio signal degrade, Link ID mismatch.
1.3.6.1.4.1.2281.10.7.2.1.21EnableDisableread-writemandatory
genEquipRadioCfgLoopbackTimeout
OBJECT-TYPE
The timeout in minutes for automatic termination of the loopback. The value '0' refers to 'no timeout'.
1.3.6.1.4.1.2281.10.7.2.1.22INTEGER (0..1440)read-writemandatory
genEquipRadioCfgAbcMode
OBJECT-TYPE
TThe radio mode (multi direction or multi carrier).
1.3.6.1.4.1.2281.10.7.2.1.23INTEGER {multi-carrier-abc(2), multi-directional(3)}read-writemandatory
genEquipRemoteRadio
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.3
genEquipRemoteRadioTable
OBJECT-TYPE
Remote radio table.
1.3.6.1.4.1.2281.10.7.3.1not-accessiblemandatory
genEquipRemoteRadioEntry
OBJECT-TYPE
Remote radio table.
1.3.6.1.4.1.2281.10.7.3.1.1not-accessiblemandatory
genEquipRemoteRadioRadioId
OBJECT-TYPE
This value is the radio ID that serves as this table Index
1.3.6.1.4.1.2281.10.7.3.1.1.1RadioIdread-onlymandatory
genEquipRemoteRadioRemoteCommunication
OBJECT-TYPE
The operational status of the remote radio.
1.3.6.1.4.1.2281.10.7.3.1.1.2DownUpread-onlymandatory
genEquipRemoteRadioRemoteIPAddr
OBJECT-TYPE
The remote Ip address.
1.3.6.1.4.1.2281.10.7.3.1.1.3IpAddressread-writemandatory
genEquipRemoteRadioRemoteRxLevel
OBJECT-TYPE
The Rx level of the remote radio (in dBm)
1.3.6.1.4.1.2281.10.7.3.1.1.4INTEGER (-199..0)read-onlymandatory
genEquipRemoteRadioRemoteForceMaxTxLevel
OBJECT-TYPE
Command that forces the remote radio maximum Tx level (in dBm)
1.3.6.1.4.1.2281.10.7.3.1.1.5INTEGER (-50..34)read-writemandatory
genEquipRemoteRadioRemoteTxFreq
OBJECT-TYPE
The remote radio Tx frequancy (in MHz).
1.3.6.1.4.1.2281.10.7.3.1.1.6INTEGERread-writemandatory
genEquipRemoteRadioRemoteRxFreq
OBJECT-TYPE
The remote radio Rx frequancy (in MHz).
1.3.6.1.4.1.2281.10.7.3.1.1.7INTEGERread-writemandatory
genEquipRemoteRadioRemoteATPCReferenceRxLevel
OBJECT-TYPE
The RSL reference level for the ATPC mechanism in the remote radio.
1.3.6.1.4.1.2281.10.7.3.1.1.8INTEGER (0..199)read-writemandatory
genEquipRemoteRadioRemoteFloatingIPAddr
OBJECT-TYPE
This value indicates the floating IP address used in the remote shelf if its main units are in 1+1 protection mode.
1.3.6.1.4.1.2281.10.7.3.1.1.9IpAddressread-writemandatory
genEquipRemoteRadioRemoteDefaultGateway
OBJECT-TYPE
Default gateway of remote NE (Network Element) across this radio link.
1.3.6.1.4.1.2281.10.7.3.1.1.10IpAddressread-onlymandatory
genEquipRemoteRadioRemoteMostSevereAlarm
OBJECT-TYPE
Most severe alarm of remote NE (Network Element) across this radio link.
1.3.6.1.4.1.2281.10.7.3.1.1.11Severityread-onlymandatory
genEquipRemoteRadioRemoteSubnetMask
OBJECT-TYPE
Subnet mask of remote NE (Network Element) across this radio link.
1.3.6.1.4.1.2281.10.7.3.1.1.12IpAddressread-onlymandatory
genEquipRemoteRadioRemoteSlotID
OBJECT-TYPE
The remote radio slot number.
1.3.6.1.4.1.2281.10.7.3.1.1.13INTEGER (1..6)read-onlymandatory
genEquipRemoteRadioRemoteForceTxMute
OBJECT-TYPE
Force the mute state of the remote unit radio interface.
1.3.6.1.4.1.2281.10.7.3.1.1.14OffOnread-writemandatory
genEquipRemoteRadioRemoteLinkId
OBJECT-TYPE
The Link Id of the remote unit radio interface.
1.3.6.1.4.1.2281.10.7.3.1.1.15INTEGERread-writemandatory
genEquipRemoteRadioRemoteATPCoverrideState
OBJECT-TYPE
Remote Radio ATPC Override Timer expire state.
1.3.6.1.4.1.2281.10.7.3.1.1.16NoYesread-onlymandatory
genEquipRemoteRadioRemoteATPCoverrideStateCancel
OBJECT-TYPE
his coomand cancel remote ATPC override state.
1.3.6.1.4.1.2281.10.7.3.1.1.17NoYesread-writemandatory
genEquipRemoteRadioRemoteDataLoopBackAdmin
OBJECT-TYPE
Remote unit administrator state of data loopback.
1.3.6.1.4.1.2281.10.7.3.1.1.18EnableDisableread-writemandatory
genEquipRemoteRadioRemoteDataLoopBackDuration
OBJECT-TYPE
Remote Data LoopBack Duration at remote unit[Minutes], zero for infinite loop back.
1.3.6.1.4.1.2281.10.7.3.1.1.19INTEGERread-writemandatory
genEquipRemoteRadioRemoteDataLoopBackSwitchAddress
OBJECT-TYPE
Remote Unit switch MAC DA.
1.3.6.1.4.1.2281.10.7.3.1.1.20EnableDisableread-writemandatory
genEquipRemoteRadioRemoteGreenReferenceRxLevel
OBJECT-TYPE
Remote Radio Green RSL reference level[dBm].
1.3.6.1.4.1.2281.10.7.3.1.1.21INTEGERread-onlymandatory
genEquipRemoteRadioRemoteMNGvlan
OBJECT-TYPE
Remote Management Vlan.
1.3.6.1.4.1.2281.10.7.3.1.1.22INTEGERread-writemandatory
genEquipRemoteRadioRemoteReset
OBJECT-TYPE
Remote reset of unit.
1.3.6.1.4.1.2281.10.7.3.1.1.23FalseTrueread-writemandatory
genEquipRemoteRadioRemoteGreenModeAdmin
OBJECT-TYPE
Remote Unit Tx Green Mode Admin.
1.3.6.1.4.1.2281.10.7.3.1.1.24EnableDisableread-writemandatory
genEquipRemoteRadioRemoteWebProtocol
OBJECT-TYPE
Remote web protocol.
1.3.6.1.4.1.2281.10.7.3.1.1.25CommunicationChannelread-writemandatory
genEquipRemoteRadioRemoteIPv6Addr
OBJECT-TYPE
Remote IPv6 Address.
1.3.6.1.4.1.2281.10.7.3.1.1.26OCTET STRING (SIZE(0..16))read-writemandatory
genEquipRemoteRadioRemotePrefixLength
OBJECT-TYPE
Remote IPv6 Subnet-Mask.
1.3.6.1.4.1.2281.10.7.3.1.1.27INTEGERread-writemandatory
genEquipRemoteRadioRemoteDefaultGatewayIpv6
OBJECT-TYPE
Remote IPv6 Default Gateway.
1.3.6.1.4.1.2281.10.7.3.1.1.28OCTET STRING (SIZE(0..16))read-writemandatory
genEquipRemoteRadioRemoteResetSlot
OBJECT-TYPE
Remote Unit Reset Slot.
1.3.6.1.4.1.2281.10.7.3.1.1.29FalseTrueread-writemandatory
genEquipRadioMRMC
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.4
genEquipRadioMRMCTable
OBJECT-TYPE
MRMC stauts table (Multi rate multi constellation)
1.3.6.1.4.1.2281.10.7.4.1not-accessiblemandatory
genEquipRadioMRMCEntry
OBJECT-TYPE
MRMC status table (Multi rate multi constellation)
1.3.6.1.4.1.2281.10.7.4.1.1not-accessiblemandatory
genEquipRadioMRMCRadioId
OBJECT-TYPE
This value is the radio ID that serves as this table Index
1.3.6.1.4.1.2281.10.7.4.1.1.1RadioIdread-onlymandatory
genEquipRadioMRMCSelectedScriptIndex
OBJECT-TYPE
The index of the MRMC script. The description of the script located in the genEquipRadioMRMCScriptTable.
1.3.6.1.4.1.2281.10.7.4.1.1.2INTEGERread-writemandatory
genEquipRadioMRMCOccupidBandwidth
OBJECT-TYPE
The Occupid Bandwidth (in KHz).
1.3.6.1.4.1.2281.10.7.4.1.1.3INTEGERread-onlymandatory
genEquipRadioMRMCOperMode
OBJECT-TYPE
The Mode of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.1.1.4INTEGER {regular-mode(0), acm-fixed-mode(1), acm-adaptive-mode(2)}read-onlymandatory
genEquipRadioMRMCCurrTxProfile
OBJECT-TYPE
The Tx profile number.
1.3.6.1.4.1.2281.10.7.4.1.1.5MrmcProfileread-onlymandatory
genEquipRadioMRMCCurrTxQAM
OBJECT-TYPE
The current Tx QAM (modulation).
1.3.6.1.4.1.2281.10.7.4.1.1.6INTEGER (4..2048)read-onlymandatory
genEquipRadioMRMCCurrTxBitrate
OBJECT-TYPE
The current Tx bit rate (in Kbps)
1.3.6.1.4.1.2281.10.7.4.1.1.7MrmcBitRateread-onlymandatory
genEquipRadioMRMCCurrTxVc
OBJECT-TYPE
The current number of Tx TDM channels.
1.3.6.1.4.1.2281.10.7.4.1.1.8INTEGER (0..1024)read-onlymandatory
genEquipRadioMRMCCurrRxProfile
OBJECT-TYPE
The current Rx profile number
1.3.6.1.4.1.2281.10.7.4.1.1.9MrmcProfileread-onlymandatory
genEquipRadioMRMCCurrRxQAM
OBJECT-TYPE
The current Rx QAM (modulation).
1.3.6.1.4.1.2281.10.7.4.1.1.10INTEGER (4..2048)read-onlymandatory
genEquipRadioMRMCCurrRxBitrate
OBJECT-TYPE
The current total Rx bit rate (in Kbps)
1.3.6.1.4.1.2281.10.7.4.1.1.11MrmcBitRateread-onlymandatory
genEquipRadioMRMCCurrRxVc
OBJECT-TYPE
The current number of Rx TDM channels.
1.3.6.1.4.1.2281.10.7.4.1.1.12INTEGER (0..1024)read-onlymandatory
genEquipRadioMRMCCurrGrade
OBJECT-TYPE
The grade of the current script.
1.3.6.1.4.1.2281.10.7.4.1.1.13RfuGraderead-onlymandatory
genEquipRadioMRMCEnAlarmOnAcmProfileDegrade
OBJECT-TYPE
Enable/Disable event and trapgeneration on ACM profiledegrade. When enabled and ifcurrent radio script supports Adaptive Code Modulation(ACM) event and trap will begenerated upon ACM profiledegradation below userdefinedthreshold. Alarm willbe generated only if the ACMprofile stays below thethreshold for at least 5 subsequent seconds. Alarm willbe cleared after ACM profilereturns to be above thethreshold again.
1.3.6.1.4.1.2281.10.7.4.1.1.14EnableDisableread-writemandatory
genEquipRadioMRMCAlarmOnAcmProfileDegradeThreshold
OBJECT-TYPE
ACM profile threshold foralarm generation
1.3.6.1.4.1.2281.10.7.4.1.1.15INTEGER (1..7)read-writemandatory
genEquipRadioMRMCScriptTable
OBJECT-TYPE
The MRMC script table.
1.3.6.1.4.1.2281.10.7.4.2not-accessiblemandatory
genEquipRadioMRMCScriptEntry
OBJECT-TYPE
The MRMC script table.
1.3.6.1.4.1.2281.10.7.4.2.1not-accessiblemandatory
genEquipRadioMRMCScriptRadioId
OBJECT-TYPE
This value is the radio ID that serves as this table Index
1.3.6.1.4.1.2281.10.7.4.2.1.1RadioIdread-onlymandatory
genEquipRadioMRMCScriptIndex
OBJECT-TYPE
The index of the MRMC scripts.
1.3.6.1.4.1.2281.10.7.4.2.1.2INTEGERread-onlymandatory
genEquipRadioMRMCScriptName
OBJECT-TYPE
The MRMC script name.
1.3.6.1.4.1.2281.10.7.4.2.1.3DisplayStringread-onlymandatory
genEquipRadioMRMCScriptOperMode
OBJECT-TYPE
The script operational mode.
1.3.6.1.4.1.2281.10.7.4.2.1.4INTEGER {regular-mode(0), acm-fixed-mode(1), acm-adaptive-mode(2)}read-onlymandatory
genEquipRadioMRMCScriptProfile
OBJECT-TYPE
The profile number of the script
1.3.6.1.4.1.2281.10.7.4.2.1.5MrmcProfileread-onlymandatory
genEquipRadioMRMCScriptProfileBitrate
OBJECT-TYPE
The Bit rate of the MRMC profile (in Kbps).
1.3.6.1.4.1.2281.10.7.4.2.1.6MrmcBitRateread-onlymandatory
genEquipRadioMRMCScriptAdaptivePower
OBJECT-TYPE
'Adaptive Power' option which is available only when operation mode is ACM-adaptive
1.3.6.1.4.1.2281.10.7.4.2.1.7INTEGER {enable-adaptive-power(0), disable-adaptive-power(1)}read-onlymandatory
genEquipRadioMRMCScriptReference
OBJECT-TYPE
'Reference Class' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled.
1.3.6.1.4.1.2281.10.7.4.2.1.8INTEGER {calss-2(0), class-4(1), class-5b(2), class-6a(3), fcc(4)}read-onlymandatory
genEquipRadioMRMCScriptMinProfile
OBJECT-TYPE
'Minimum Profile' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled. It state the minimum profile level for this script.
1.3.6.1.4.1.2281.10.7.4.2.1.9MrmcProfileread-onlymandatory
genEquipRadioMRMCFilteredTable
OBJECT-TYPE
Filtered MRMC scripts table.
1.3.6.1.4.1.2281.10.7.4.3not-accessiblemandatory
genEquipRadioMRMCFilteredEntry
OBJECT-TYPE
List of the filtered MRMC scripts.
1.3.6.1.4.1.2281.10.7.4.3.1not-accessiblemandatory
genEquipRadioMRMCFilteredRadioId
OBJECT-TYPE
The index of the radio interface
1.3.6.1.4.1.2281.10.7.4.3.1.1RadioIdread-onlymandatory
genEquipRadioMRMCFilteredScriptId
OBJECT-TYPE
The MRMC filtered script IDs that are available in the specific radio.
1.3.6.1.4.1.2281.10.7.4.3.1.2MrmcScriptIdread-onlymandatory
genEquipRadioMRMCProfileAttrTable
OBJECT-TYPE
MRMC profile attribute table.
1.3.6.1.4.1.2281.10.7.4.4not-accessiblemandatory
genEquipRadioMRMCProfileAttrEntry
OBJECT-TYPE
MRMC script profile's attributes.
1.3.6.1.4.1.2281.10.7.4.4.1not-accessiblemandatory
genEquipRadioMRMCProfileAttrScriptId
OBJECT-TYPE
The index of the table
1.3.6.1.4.1.2281.10.7.4.4.1.1MrmcScriptIdread-onlymandatory
genEquipRadioMRMCProfileAttrTxProfile
OBJECT-TYPE
The profile number of the TX channel.
1.3.6.1.4.1.2281.10.7.4.4.1.2MrmcProfileread-onlymandatory
genEquipRadioMRMCProfileAttrRxProfile
OBJECT-TYPE
The profile number of the RX channel.
1.3.6.1.4.1.2281.10.7.4.4.1.3MrmcProfileread-onlymandatory
genEquipRadioMRMCProfileAttrTxQAM
OBJECT-TYPE
Indicates the QAM level of the TX channel.
1.3.6.1.4.1.2281.10.7.4.4.1.4QamOrderread-onlymandatory
genEquipRadioMRMCProfileAttrTxBitRate
OBJECT-TYPE
Indicates the TX bit-rate of the profile.
1.3.6.1.4.1.2281.10.7.4.4.1.5MrmcBitRateread-onlymandatory
genEquipRadioMRMCProfileAttrRxQAM
OBJECT-TYPE
Indicates the QAM level of the RX channel.
1.3.6.1.4.1.2281.10.7.4.4.1.6QamOrderread-onlymandatory
genEquipRadioMRMCProfileAttrRxBitRate
OBJECT-TYPE
RX bit-rate of the profile.
1.3.6.1.4.1.2281.10.7.4.4.1.7MrmcBitRateread-onlymandatory
genEquipRadioMRMCScriptAttrTable
OBJECT-TYPE
MRMC script attribute table.
1.3.6.1.4.1.2281.10.7.4.5not-accessiblemandatory
genEquipRadioMRMCScriptAttrEntry
OBJECT-TYPE
MRMC script attributes.
1.3.6.1.4.1.2281.10.7.4.5.1not-accessiblemandatory
genEquipRadioMRMCScriptAttrScriptId
OBJECT-TYPE
The ID of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.5.1.1MrmcScriptIdread-onlymandatory
genEquipRadioMRMCScriptAttrScriptName
OBJECT-TYPE
The name that identifies the script.
1.3.6.1.4.1.2281.10.7.4.5.1.2DisplayString (SIZE(0..100))read-onlymandatory
genEquipRadioMRMCScriptAttrSupportACM
OBJECT-TYPE
Indicates if the MRMC script supports ACM (Adaptive Coding Modulation) functionality
1.3.6.1.4.1.2281.10.7.4.5.1.3NoYesread-onlymandatory
genEquipRadioMRMCScriptAttrStandard
OBJECT-TYPE
The standard that the MRMC script is designed to comply with.
1.3.6.1.4.1.2281.10.7.4.5.1.4INTEGER {unknown(0), etsi(1), fcc(2), etsi-fcc(3)}read-onlymandatory
genEquipRadioMRMCScriptAttrMultiCarrier
OBJECT-TYPE
Indicates whether the MRMC script support a single carrier or any kind of multi carrier.
1.3.6.1.4.1.2281.10.7.4.5.1.5INTEGER {single-carrier(0), xpic(1), mimo(2)}read-onlymandatory
genEquipRadioMRMCScriptAttrAdjChannel
OBJECT-TYPE
Indicates whether the MRMC script supports adjacent channel
1.3.6.1.4.1.2281.10.7.4.5.1.6NoYesread-onlymandatory
genEquipRadioMRMCScriptAttrModScheme
OBJECT-TYPE
Indicates whether the MRMC script supports fixed or adaptive (ACM) modulation scheme.
1.3.6.1.4.1.2281.10.7.4.5.1.7INTEGER {regular(2), fixed(3), adaptive(4), fixed-adaptive(5), manual(6)}read-onlymandatory
genEquipRadioMRMCScriptAttrSymmetry
OBJECT-TYPE
Indicates whether the MRMC script is designed to normal (symmetrical) BW or an Asymmetrical BW.
1.3.6.1.4.1.2281.10.7.4.5.1.8INTEGER {normal(0), asymmetry(1)}read-onlymandatory
genEquipRadioMRMCScriptAttrLatency
OBJECT-TYPE
The Latency level of the MRMC Script.
1.3.6.1.4.1.2281.10.7.4.5.1.9INTEGER {normal(0), low(1)}read-onlymandatory
genEquipRadioMRMCScriptAttrTxBW
OBJECT-TYPE
The TX channel bandwidth (channel spacing) of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.5.1.10INTEGER (1..512000)read-onlymandatory
genEquipRadioMRMCScriptAttrRxBW
OBJECT-TYPE
The RX channel bandwidth (channel spacing) of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.5.1.11INTEGER (1..512000)read-onlymandatory
genEquipRadioMRMCScriptAttrTxOccupiedBW
OBJECT-TYPE
The TX channel occupied bandwidth of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.5.1.12INTEGER (1..512000)read-onlymandatory
genEquipRadioMRMCScriptAttrRxOccupiedBW
OBJECT-TYPE
The RX channel occupied bandwidth of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.5.1.13INTEGERread-onlymandatory
genEquipRadioMRMCScriptAttrLinkGrade
OBJECT-TYPE
The link grade level that the MRMC script is designed to cope with.
1.3.6.1.4.1.2281.10.7.4.5.1.14RfuGraderead-onlymandatory
genEquipRadioMRMCScriptAttrDiffGrade
OBJECT-TYPE
The Differential grade level that the MRMC script is designed to cope with.
1.3.6.1.4.1.2281.10.7.4.5.1.15RfuGraderead-onlymandatory
genEquipRadioMRMCScriptAttrChannelBW
OBJECT-TYPE
The channel bandwidth (channel spacing) the MRMC script is designed to.
1.3.6.1.4.1.2281.10.7.4.5.1.16INTEGER (1..512000)read-onlymandatory
genEquipRadioMRMCScriptAttrTxMaxProfile
OBJECT-TYPE
The maximum available TX profile of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.5.1.17MrmcProfileread-onlymandatory
genEquipRadioMRMCScriptAttrRxMaxProfile
OBJECT-TYPE
The maximum available RX profile of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.5.1.18MrmcProfileread-onlymandatory
genEquipRadioMRMCConfigTable
OBJECT-TYPE
MRMC script configuration.
1.3.6.1.4.1.2281.10.7.4.6not-accessiblemandatory
genEquipRadioMRMCConfigEntry
OBJECT-TYPE
The configured parameters of the MRMC script.
1.3.6.1.4.1.2281.10.7.4.6.1not-accessiblemandatory
genEquipRadioMRMCConfigRadioId
OBJECT-TYPE
The index of the MRMC Configuration Table.
1.3.6.1.4.1.2281.10.7.4.6.1.1RadioIdread-onlymandatory
genEquipRadioMRMCConfigActiveScriptId
OBJECT-TYPE
The script ID of required MRMC script.
1.3.6.1.4.1.2281.10.7.4.6.1.2MrmcScriptIdread-writemandatory
genEquipRadioMRMCConfigStandbyScriptId
OBJECT-TYPE
The script ID which is in standby.
1.3.6.1.4.1.2281.10.7.4.6.1.3MrmcScriptIdread-writemandatory
genEquipRadioMRMCConfigOperMode
OBJECT-TYPE
The operational mode of the MRMC script, whether it is fixed or adaptive modulation functionality.
1.3.6.1.4.1.2281.10.7.4.6.1.4INTEGER {fixed(2), adaptive(3), manual(4)}read-writemandatory
genEquipRadioMRMCConfigMaxProfile
OBJECT-TYPE
The maximum profile which is required for the MRMC script
1.3.6.1.4.1.2281.10.7.4.6.1.5MrmcProfileread-writemandatory
genEquipRadioMRMCConfigMinProfile
OBJECT-TYPE
The minimum profile which is required for the MRMC script
1.3.6.1.4.1.2281.10.7.4.6.1.6MrmcProfileread-writemandatory
genEquipRadioMRMCConfigAdaptivePowerAdmin
OBJECT-TYPE
Enable or disable the adaptive power functionality during ACM operation.
1.3.6.1.4.1.2281.10.7.4.6.1.7EnableDisableread-writemandatory
genEquipRadioMRMCConfigAdaptivePowerRefClass
OBJECT-TYPE
Determines the efficiency class for the adaptive power functionality in ACM operation.
1.3.6.1.4.1.2281.10.7.4.6.1.8INTEGER {class-2(0), class-4(1), class-5b(2), class-6a(3), fcc(4), class-7a(5), class-7b(6)}read-writemandatory
genEquipRadioComp
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.5
genEquipRadioCompCfgTable
OBJECT-TYPE
Radio Compression table
1.3.6.1.4.1.2281.10.7.5.1not-accessiblemandatory
genEquipRadioCompCfgEntry
OBJECT-TYPE
Radio Compression table
1.3.6.1.4.1.2281.10.7.5.1.1not-accessiblemandatory
genEquipRadioCompMode
OBJECT-TYPE
Setting Ethernet packet header & payload compression mode. In Enhanced mode packet header can be compressed up to L4 and data compression can be activated. Legacy mode is back compatible to earlier software and hardware releases.
1.3.6.1.4.1.2281.10.7.5.1.1.1INTEGER {legacy(0), enhanced(1)}read-writemandatory
genEquipRadioEnhHeaderCompAdmin
OBJECT-TYPE
Enable/Disable Enhanced Header compression.
1.3.6.1.4.1.2281.10.7.5.1.1.2AllowedNotAllowedread-writemandatory
genEquipRadioEnhDataCompAdmin
OBJECT-TYPE
Enable/Disable Enhanced Data compression.
1.3.6.1.4.1.2281.10.7.5.1.1.3EnableDisableread-writemandatory
genEquipRadioEnhHeaderCompMode
OBJECT-TYPE
Setting Enhanced Header Compression depth.
1.3.6.1.4.1.2281.10.7.5.1.1.4INTEGER {l2(0), l3(1), l4(2)}read-writemandatory
genEquipRadioCompStatusTable
OBJECT-TYPE
Radio Compression status table.
1.3.6.1.4.1.2281.10.7.5.2not-accessiblemandatory
genEquipRadioCompStatusEntry
OBJECT-TYPE
Radio Compression status table.
1.3.6.1.4.1.2281.10.7.5.2.1not-accessiblemandatory
genEquipRadioCompOperationalState
OBJECT-TYPE
Current compression mode operational status.
1.3.6.1.4.1.2281.10.7.5.2.1.1INTEGER {legacy(0), enhanced-HC-DC-bypass(1), enhanced-HC-active-DC-bypass(2), enhanced-DC-active-HC-bypass(3), enhanced-HC-DC-active(4), undefined(5)}read-onlymandatory
genEquipRadioCompExclRulesTable
OBJECT-TYPE
Enhanced Header Compression excluding rules table.
1.3.6.1.4.1.2281.10.7.5.3not-accessiblemandatory
genEquipRadioCompExclRulesEntry
OBJECT-TYPE
Enhanced Header Compression excluding rules table.
1.3.6.1.4.1.2281.10.7.5.3.1not-accessiblemandatory
genEquipRadioCompExclRuleId
OBJECT-TYPE
Excluding rule number index.
1.3.6.1.4.1.2281.10.7.5.3.1.1INTEGER (1..32)read-onlymandatory
genEquipRadioCompExclRuleType
OBJECT-TYPE
Add excluding rule for enhanced header compression. Excluding rule must have a number (rule-id), text description (rule-name) and excluding rule type whichcan be one of the following: VLAN Id or MAC destination address or MAC source address or Ethernet ethertype or user defined flow type.
1.3.6.1.4.1.2281.10.7.5.3.1.2INTEGER {flow-Id(0), vlan(1), mac-DA(2), mac-SA(3), ethertype(4), none(5)}read-writemandatory
genEquipRadioCompExclRuleName
OBJECT-TYPE
Excluding rule name. User specified.
1.3.6.1.4.1.2281.10.7.5.3.1.3DisplayStringread-writemandatory
genEquipRadioCompExclRuleValue
OBJECT-TYPE
Excluding rule value. For example: MAC address or Ethertype.
1.3.6.1.4.1.2281.10.7.5.3.1.4OCTET STRINGread-writemandatory
genEquipRadioCompExclRuleRowStatus
OBJECT-TYPE
Row status for this table.
1.3.6.1.4.1.2281.10.7.5.3.1.30RowStatusread-writemandatory
genEquipRadioCompNG
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.5.4
genEquipRadioCompNGCfgTable
OBJECT-TYPE
Radio Ethernet and compression config table
1.3.6.1.4.1.2281.10.7.5.4.1not-accessiblemandatory
genEquipRadioCompNGCfgEntry
OBJECT-TYPE
Radio Ethernet and compression config table entry
1.3.6.1.4.1.2281.10.7.5.4.1.1not-accessiblemandatory
genEquipRadioCompNGCfgifIndex
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.2281.10.7.5.4.1.1.1INTEGERread-writemandatory
genEquipRadioHeaderCompNGCfgClearStats
OBJECT-TYPE
Clear counters on the radio port. This includes: compression counters, PTP optimized transport and cut-through counters.
1.3.6.1.4.1.2281.10.7.5.4.1.1.2NoYesread-writemandatory
genEquipRadioHeaderCompNGCfgUserFlowType
OBJECT-TYPE
User configured flow type for enhanced HC. This flow type is used for statistics and performance evaluation of the enhanced HC.
1.3.6.1.4.1.2281.10.7.5.4.1.1.3INTEGERread-writemandatory
genEquipRadioHeaderCompNGCfgMode
OBJECT-TYPE
Legacy mode is compatible for old platforms. Disabled mode disables compression. Other modes specify compression depth.
1.3.6.1.4.1.2281.10.7.5.4.1.1.4HcModeTyperead-writemandatory
genEquipRadioCutThroughNGCfgMode
OBJECT-TYPE
Enable/Disable cut-through.
1.3.6.1.4.1.2281.10.7.5.4.1.1.5NoYesread-writemandatory
genEquipRadioCompNGExclRulesTable
OBJECT-TYPE
Enhanced HC excluding rules table
1.3.6.1.4.1.2281.10.7.5.4.2not-accessiblemandatory
genEquipRadioCompNGExclRulesEntry
OBJECT-TYPE
Enhanced HC excluding rules table entry
1.3.6.1.4.1.2281.10.7.5.4.2.1not-accessiblemandatory
genEquipRadioCompNGExclRulesifIndex
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.2281.10.7.5.4.2.1.1INTEGERread-onlymandatory
genEquipRadioCompNGExclRuleId
OBJECT-TYPE
Excluding rule number.
1.3.6.1.4.1.2281.10.7.5.4.2.1.2INTEGERread-onlymandatory
genEquipRadioCompNGExclRuleName
OBJECT-TYPE
Excluding rule name.
1.3.6.1.4.1.2281.10.7.5.4.2.1.3DisplayString (SIZE(0..10))read-onlymandatory
genEquipRadioCompNGExclRuleType
OBJECT-TYPE
Excluding rule type. Possible options are: DA MAC, SA MAC, VLAN(4 bytes), Ethertype or Flow type.
1.3.6.1.4.1.2281.10.7.5.4.2.1.4EnhancedHCExclRuleTyperead-onlymandatory
genEquipRadioCompNGExclRuleValue
OBJECT-TYPE
Excluding rule value. The value may be MAC address, VLAN(4 bytes), Ethertype(2 bytes) or Flow type(1 byte).
1.3.6.1.4.1.2281.10.7.5.4.2.1.5OCTET STRINGread-onlymandatory
genEquipRadioCutThroughNGCountersTable
OBJECT-TYPE
Port counters table
1.3.6.1.4.1.2281.10.7.5.4.3not-accessiblemandatory
genEquipRadioCutThroughNGCountersEntry
OBJECT-TYPE
Port counters table entry
1.3.6.1.4.1.2281.10.7.5.4.3.1not-accessiblemandatory
genEquipRadioCutThroughNGCountersifIndex
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.2281.10.7.5.4.3.1.1INTEGERread-onlymandatory
genEquipRadioCutThroughNGCountersRxFrames
OBJECT-TYPE
Counter of good cut-through bytes received.
1.3.6.1.4.1.2281.10.7.5.4.3.1.2Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersRxBytes
OBJECT-TYPE
Counter of good cut-through bytes received.
1.3.6.1.4.1.2281.10.7.5.4.3.1.3Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTxFrames
OBJECT-TYPE
Counter of cut-through frames transmitted.
1.3.6.1.4.1.2281.10.7.5.4.3.1.4Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTxBytes
OBJECT-TYPE
Counter of cut-through bytes transmitted.
1.3.6.1.4.1.2281.10.7.5.4.3.1.5Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTotalRxFrames
OBJECT-TYPE
Counter of total good frames received on the port.
1.3.6.1.4.1.2281.10.7.5.4.3.1.6Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTotalRxBytes
OBJECT-TYPE
Counter of total good bytes received on the port.
1.3.6.1.4.1.2281.10.7.5.4.3.1.7Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTotalTxBytesOut
OBJECT-TYPE
Counter of total transmitted bytes.
1.3.6.1.4.1.2281.10.7.5.4.3.1.8Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTotalTxFrames
OBJECT-TYPE
Counter of total transmitted frames.
1.3.6.1.4.1.2281.10.7.5.4.3.1.9Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTotalTxIdleBytes
OBJECT-TYPE
Counter of total transmitted idle bytes.
1.3.6.1.4.1.2281.10.7.5.4.3.1.10Counter64read-onlymandatory
genEquipRadioCutThroughNGCountersTotalTxBytesIn
OBJECT-TYPE
Counter of total transmitted bytes.
1.3.6.1.4.1.2281.10.7.5.4.3.1.11Counter64read-onlymandatory
genEquipRadioCompNGStatusTable
OBJECT-TYPE
Radio Ethernet and compression status table
1.3.6.1.4.1.2281.10.7.5.4.4not-accessiblemandatory
genEquipRadioCompNGStatusEntry
OBJECT-TYPE
Radio Ethernet and compression status table entry
1.3.6.1.4.1.2281.10.7.5.4.4.1not-accessiblemandatory
genEquipRadioCompNGStatusifindex
OBJECT-TYPE
Interface location.
1.3.6.1.4.1.2281.10.7.5.4.4.1.1INTEGERread-onlymandatory
genEquipRadioCompNGStatusOperationalState
OBJECT-TYPE
Header Compression operational state.
1.3.6.1.4.1.2281.10.7.5.4.4.1.2HcModeTyperead-onlymandatory
genEquipRadioCompNGStatusType
OBJECT-TYPE
Header Compression type.
1.3.6.1.4.1.2281.10.7.5.4.4.1.3HcTyperead-onlymandatory
genEquipRadioCompNGCountersTable
OBJECT-TYPE
Enhanced HC counters table
1.3.6.1.4.1.2281.10.7.5.4.7not-accessiblemandatory
genEquipRadioCompNGCountersEntry
OBJECT-TYPE
Enhanced HC counters table entry
1.3.6.1.4.1.2281.10.7.5.4.7.1not-accessiblemandatory
genEquipRadioCompNGCountersifIndex
OBJECT-TYPE
Interface location.
1.3.6.1.4.1.2281.10.7.5.4.7.1.1INTEGERread-onlymandatory
genEquipRadioCompNGCountersHCInBytes
OBJECT-TYPE
Counter of bytes on the TX side before enhanced header compression.
1.3.6.1.4.1.2281.10.7.5.4.7.1.2Counter64read-onlymandatory
genEquipRadioCompNGCountersHCOutBytes
OBJECT-TYPE
Counter of bytes on the TX side compressed by enhanced header compression.
1.3.6.1.4.1.2281.10.7.5.4.7.1.3Counter64read-onlymandatory
genEquipRadioCompNGCountersHCCompFrm
OBJECT-TYPE
Counter of frames on the TX side compressed by enhanced header compression.
1.3.6.1.4.1.2281.10.7.5.4.7.1.4Counter64read-onlymandatory
genEquipRadioCompNGCountersHCFrmUncmpExclRule
OBJECT-TYPE
Counter of frames on the TX side not compressed by enhanced header compression due to excluding rules.
1.3.6.1.4.1.2281.10.7.5.4.7.1.5Counter64read-onlymandatory
genEquipRadioCompNGCountersHCFrmUcompInternal
OBJECT-TYPE
Counter of frames on the TX side not compressed by enhanced header compression due to other resons.
1.3.6.1.4.1.2281.10.7.5.4.7.1.6Counter64read-onlymandatory
genEquipRadioCompNGCountersHCLearningFrm
OBJECT-TYPE
Counter of learning frames transmitted by enhanced header compression.
1.3.6.1.4.1.2281.10.7.5.4.7.1.7Counter64read-onlymandatory
genEquipRadioCompNGCountersHCUserFlowTypeActiveFlows
OBJECT-TYPE
Number of enhanced HC active flows occupied by user selected flow type.
1.3.6.1.4.1.2281.10.7.5.4.7.1.8Counter64read-onlymandatory
genEquipRadioCompNGCountersHCTotalActiveFlows
OBJECT-TYPE
Number of enhanced HC active flows on the TX side.
1.3.6.1.4.1.2281.10.7.5.4.7.1.9Counter64read-onlymandatory
genEquipRadioPtpTransport
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.6
genEquipRadioPtpTransportCfgTable
OBJECT-TYPE
PTP optimized transport channel configuration table.
1.3.6.1.4.1.2281.10.7.6.1not-accessiblemandatory
genEquipRadioPtpTransportCfgEntry
OBJECT-TYPE
PTP optimized transport channel configuration table.
1.3.6.1.4.1.2281.10.7.6.1.1not-accessiblemandatory
genEquipRadioPtpTransportChannelAdmin
OBJECT-TYPE
PTP optimized transport admin.
1.3.6.1.4.1.2281.10.7.6.1.1.1EnableDisableread-writemandatory
genEquipRadioPtpTransportChannelMode
OBJECT-TYPE
PTP optimized transport operational mode.
1.3.6.1.4.1.2281.10.7.6.1.1.2INTEGER {h-cos(0), ieee-1588(1)}read-writemandatory
genEquipRadioPtpTransportCountersTable
OBJECT-TYPE
PTP optimized transport channel counters table.
1.3.6.1.4.1.2281.10.7.6.2not-accessiblemandatory
genEquipRadioPtpTransportCountersEntry
OBJECT-TYPE
PTP optimized transport channel counters table.
1.3.6.1.4.1.2281.10.7.6.2.1not-accessiblemandatory
genEquipRadioPtpTransportTxFrames
OBJECT-TYPE
PTP optimized transport TX frames.
1.3.6.1.4.1.2281.10.7.6.2.1.1INTEGERread-onlymandatory
genEquipRadioPtpTransportTxDroppedFrames
OBJECT-TYPE
PTP optimized transport TX dropped frames.
1.3.6.1.4.1.2281.10.7.6.2.1.2INTEGERread-onlymandatory
genEquipRadioPtpTransportTxBytes
OBJECT-TYPE
PTP optimized transport TX bytes.
1.3.6.1.4.1.2281.10.7.6.2.1.3INTEGERread-onlymandatory
genEquipRadioPtpTransportTxDroppedBytes
OBJECT-TYPE
PTP optimized transport TX dropped bytes.
1.3.6.1.4.1.2281.10.7.6.2.1.4INTEGERread-onlymandatory
genEquipRadioPtpTransportRxFrames
OBJECT-TYPE
PTP optimized transport RX frames.
1.3.6.1.4.1.2281.10.7.6.2.1.5INTEGERread-onlymandatory
genEquipRadioPtpTransportRxBytes
OBJECT-TYPE
PTP optimized transport RX bytes.
1.3.6.1.4.1.2281.10.7.6.2.1.6INTEGERread-onlymandatory
genEquipRadioCutThrough
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.7
genEquipRadioCutThroughCfgTable
OBJECT-TYPE
Cut through configuration table.
1.3.6.1.4.1.2281.10.7.7.1not-accessiblemandatory
genEquipRadioCutThroughCfgEntry
OBJECT-TYPE
Cut through configuration table.
1.3.6.1.4.1.2281.10.7.7.1.1not-accessiblemandatory
genEquipRadioCutThroughChannelAdmin
OBJECT-TYPE
Enable/Disable cut through mode.
1.3.6.1.4.1.2281.10.7.7.1.1.1EnableDisableread-writemandatory
genEquipRadioCutThroughCountersTable
OBJECT-TYPE
Cut through mode counters table.
1.3.6.1.4.1.2281.10.7.7.2not-accessiblemandatory
genEquipRadioCutThroughCountersEntry
OBJECT-TYPE
Cut through mode counters table.
1.3.6.1.4.1.2281.10.7.7.2.1not-accessiblemandatory
genEquipRadioCutThroughTxFrames
OBJECT-TYPE
Cut through TX frames.
1.3.6.1.4.1.2281.10.7.7.2.1.1INTEGERread-onlymandatory
genEquipRadioCutThroughTxBytes
OBJECT-TYPE
Cut through TX bytes.
1.3.6.1.4.1.2281.10.7.7.2.1.2INTEGERread-onlymandatory
genEquipRadioCutThroughRxFrames
OBJECT-TYPE
Cut through RX frames.
1.3.6.1.4.1.2281.10.7.7.2.1.3INTEGERread-onlymandatory
genEquipRadioCutThroughRxBytes
OBJECT-TYPE
Cut through RX bytes.
1.3.6.1.4.1.2281.10.7.7.2.1.4INTEGERread-onlymandatory
genEquipRadioGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.8
genEquipRadioGroupsProtection
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.8.1
genEquipRadioGroupsProtectionAttrTable
OBJECT-TYPE
This table contains the attributes of the radio protection groups.
1.3.6.1.4.1.2281.10.7.8.1.1not-accessiblemandatory
genEquipRadioGroupsProtectionAttrEntry
OBJECT-TYPE
This table entry contains the attributes of the radio protection groups.
1.3.6.1.4.1.2281.10.7.8.1.1.1not-accessiblemandatory
genEquipRadioGroupsProtectionAttrGroupIfIndex
OBJECT-TYPE
The location of the group
1.3.6.1.4.1.2281.10.7.8.1.1.1.1INTEGERread-onlymandatory
genEquipRadioGroupsProtectionAttrGroupId
OBJECT-TYPE
The Id of the radio protection group.
1.3.6.1.4.1.2281.10.7.8.1.1.1.2INTEGER (1..4)read-writemandatory
genEquipRadioGroupsProtectionAttrCommand
OBJECT-TYPE
Radio protection user commands for maintenance purposes: force-switch, lockout and manual-switch.
1.3.6.1.4.1.2281.10.7.8.1.1.1.3RadioProtectionCmdread-writemandatory
genEquipRadioGroupsProtectionAttrCopyToMate
OBJECT-TYPE
Copy to mate command that copies the configuration from one radio to another in order to achieve configuration alignment.
1.3.6.1.4.1.2281.10.7.8.1.1.1.4OffOnread-writemandatory
genEquipRadioGroupsProtectionAttrCopyToMateSourceIfIndex
OBJECT-TYPE
The radio location which is required to be the source of configuration for copy-to-mate command.
1.3.6.1.4.1.2281.10.7.8.1.1.1.5INTEGERread-writemandatory
genEquipRadioGroupsProtectionAttrRevertiveAdmin
OBJECT-TYPE
Enable or disable revertive mode of radio protection.
1.3.6.1.4.1.2281.10.7.8.1.1.1.6EnableDisableread-writemandatory
genEquipRadioGroupsProtectionAttrRevertivePrimaryIfIndex
OBJECT-TYPE
The radio which the system is required to revert to.
1.3.6.1.4.1.2281.10.7.8.1.1.1.7INTEGERread-writemandatory
genEquipRadioGroupsProtectionMembersTable
OBJECT-TYPE
This table contains the radio protection groups members.
1.3.6.1.4.1.2281.10.7.8.1.2not-accessiblemandatory
genEquipRadioGroupsProtectionMembersEntry
OBJECT-TYPE
This table entry contains the radio protection groups members.
1.3.6.1.4.1.2281.10.7.8.1.2.1not-accessiblemandatory
genEquipRadioGroupsProtectionMembersIfIndexGroup
OBJECT-TYPE
The location of the radio protection group
1.3.6.1.4.1.2281.10.7.8.1.2.1.1INTEGERread-onlymandatory
genEquipRadioGroupsProtectionMembersGroupId
OBJECT-TYPE
The Id of the radio protection group.
1.3.6.1.4.1.2281.10.7.8.1.2.1.2INTEGER (1..4)read-onlymandatory
genEquipRadioGroupsProtectionMembersMem1IfIndex
OBJECT-TYPE
The radio location of member 1.
1.3.6.1.4.1.2281.10.7.8.1.2.1.3INTEGERread-writemandatory
genEquipRadioGroupsProtectionMembersMem2IfIndex
OBJECT-TYPE
The radio location of member 2.
1.3.6.1.4.1.2281.10.7.8.1.2.1.4INTEGERread-writemandatory
genEquipRadioGroupsProtectionMembersRowStatus
OBJECT-TYPE
Row status to allow user add entries dynamically.
1.3.6.1.4.1.2281.10.7.8.1.2.1.30RowStatusread-writemandatory
genEquipRadioGroupsProtectionStatusTable
OBJECT-TYPE
This table contains the status of the radio protection.
1.3.6.1.4.1.2281.10.7.8.1.3not-accessiblemandatory
genEquipRadioGroupsProtectionStatusEntry
OBJECT-TYPE
This table entry contains the status of the radio protection.
1.3.6.1.4.1.2281.10.7.8.1.3.1not-accessiblemandatory
genEquipRadioGroupsProtectionStatusGroupIfIndex
OBJECT-TYPE
The location of the group
1.3.6.1.4.1.2281.10.7.8.1.3.1.1INTEGERread-onlymandatory
genEquipRadioGroupsProtectionStatusActiveIfIndex
OBJECT-TYPE
The active radio location
1.3.6.1.4.1.2281.10.7.8.1.3.1.2INTEGERread-onlymandatory
genEquipRadioGroupsProtectionStatusStandbyIfIndex
OBJECT-TYPE
The standby radio location.
1.3.6.1.4.1.2281.10.7.8.1.3.1.3INTEGERread-onlymandatory
genEquipRadioGroupsProtectionStatusLockout
OBJECT-TYPE
The radio location of member 1.
1.3.6.1.4.1.2281.10.7.8.1.3.1.4NoYesread-onlymandatory
genEquipRadioGroupsProtectionBBSSD
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.8.1.10
genEquipRadioGroupsProtectionBBSSDAttrTable
OBJECT-TYPE
This table contains the BBS-SD attributes of the radio protection groups.
1.3.6.1.4.1.2281.10.7.8.1.10.1not-accessiblemandatory
genEquipRadioGroupsProtectionBBSSDAttrEntry
OBJECT-TYPE
This table entry contains the BBS-SD attributes of the radio protection groups.
1.3.6.1.4.1.2281.10.7.8.1.10.1.1not-accessiblemandatory
genEquipRadioGroupsProtectionBBSSDAttrGroupIfIndex
OBJECT-TYPE
The location of the group
1.3.6.1.4.1.2281.10.7.8.1.10.1.1.1INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDAttrRevertive
OBJECT-TYPE
Enable or disable revertive mode for BBS-SD Rx switch.
1.3.6.1.4.1.2281.10.7.8.1.10.1.1.2EnableDisableread-writemandatory
genEquipRadioGroupsProtectionBBSSDAttrClrSwCnt
OBJECT-TYPE
Clear BBS-SD Rx switch counter.
1.3.6.1.4.1.2281.10.7.8.1.10.1.1.3OffOnread-writemandatory
genEquipRadioGroupsProtectionBBSSDAttrFWAuto
OBJECT-TYPE
Enable or disable automatic Rx switching in BBS-SD.
1.3.6.1.4.1.2281.10.7.8.1.10.1.1.4EnableDisableread-writemandatory
genEquipRadioGroupsProtectionBBSSDStatusTable
OBJECT-TYPE
This table contains the BBS-SD status of the radio protection groups.
1.3.6.1.4.1.2281.10.7.8.1.10.2not-accessiblemandatory
genEquipRadioGroupsProtectionBBSSDStatusEntry
OBJECT-TYPE
This table entry contains the BBS-SD status of the radio protection groups.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1not-accessiblemandatory
genEquipRadioGroupsProtectionBBSSDStatusGroupIfIndex
OBJECT-TYPE
The location of the group
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.1INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusAbcGroupIfIndex
OBJECT-TYPE
The attached MC-ABC group if_index.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.2INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusActiveRxQuality
OBJECT-TYPE
The active MC-ABC channel quality.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.3INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusActiveRxRadioIfIndex
OBJECT-TYPE
The active rx radio if_index.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.4INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusActiveTxRadioIfIndex
OBJECT-TYPE
The active Tx radio if_index.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.5INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusLockout
OBJECT-TYPE
Indicates whether the radio protection is currently in lockout.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.6NoYesread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusRxChId
OBJECT-TYPE
The attached MC-ABC channel ID.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.7INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusStdbyRxQuality
OBJECT-TYPE
The standby MC-ABC channel quality.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.8INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusStdbyRxRadioIfIndex
OBJECT-TYPE
The standby rx radio if_index.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.9INTEGERread-onlymandatory
genEquipRadioGroupsProtectionBBSSDStatusStandbyTxRadioIfIndex
OBJECT-TYPE
The standby Tx radio if_index.
1.3.6.1.4.1.2281.10.7.8.1.10.2.1.10INTEGERread-onlymandatory
genEquipRadioGroupsXpic
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.8.2
genEquipRadioGroupsXPICAttrTable
OBJECT-TYPE
This table contains the configuration of the radio XPIC groups.
1.3.6.1.4.1.2281.10.7.8.2.1not-accessiblemandatory
genEquipRadioGroupsXPICAttrEntry
OBJECT-TYPE
This table entry contains the configuration of the radio XPIC groups.
1.3.6.1.4.1.2281.10.7.8.2.1.1not-accessiblemandatory
genEquipRadioGroupsXPICAttrGroupIfIndex
OBJECT-TYPE
The location of the group.
1.3.6.1.4.1.2281.10.7.8.2.1.1.1INTEGERread-onlymandatory
genEquipRadioGroupsXPICAttrCopyToMateSourceIfIndex
OBJECT-TYPE
The radio location which is required to be the source of configuration for copy-to-mate command.
1.3.6.1.4.1.2281.10.7.8.2.1.1.2INTEGERread-writemandatory
genEquipRadioGroupsXPICAttrGroupId
OBJECT-TYPE
XPIC group id.
1.3.6.1.4.1.2281.10.7.8.2.1.1.3INTEGER (1..4)read-writemandatory
genEquipRadioGroupsXPICAttrXRSMAdmin
OBJECT-TYPE
Administrative state of XPIC recovery state machine.
1.3.6.1.4.1.2281.10.7.8.2.1.1.4EnableDisableread-writemandatory
genEquipRadioGroupsXPICAttrAdmin
OBJECT-TYPE
Administrative state of XPIC.
1.3.6.1.4.1.2281.10.7.8.2.1.1.5EnableDisableread-writemandatory
genEquipRadioGroupsXPICAttrCopyToMate
OBJECT-TYPE
User Command to resolve the mismatch between the two carriers in the XPIC group.
1.3.6.1.4.1.2281.10.7.8.2.1.1.6Copy2materead-writemandatory
genEquipRadioGroupsXPICMembersTable
OBJECT-TYPE
This table contains the radio XPIC groups members.
1.3.6.1.4.1.2281.10.7.8.2.2not-accessiblemandatory
genEquipRadioGroupsXPICMembersEntry
OBJECT-TYPE
This table entry contains the radio XPIC groups members.
1.3.6.1.4.1.2281.10.7.8.2.2.1not-accessiblemandatory
genEquipRadioGroupsXPICMembersIfIndexGroup
OBJECT-TYPE
The location of the radio XPIC group.
1.3.6.1.4.1.2281.10.7.8.2.2.1.1INTEGERread-onlymandatory
genEquipRadioGroupsXPICMembersMem1IfIndex
OBJECT-TYPE
The radio location of member 1.
1.3.6.1.4.1.2281.10.7.8.2.2.1.2INTEGER (1..4)read-writemandatory
genEquipRadioGroupsXPICMembersMem2IfIndex
OBJECT-TYPE
The radio location of member 2.
1.3.6.1.4.1.2281.10.7.8.2.2.1.3INTEGERread-writemandatory
genEquipRadioGroupsXPICMembersRowStatus
OBJECT-TYPE
Row status to allow user add entries dynamically.
1.3.6.1.4.1.2281.10.7.8.2.2.1.30RowStatusread-writemandatory
genEquipRadioGroupsXPICStatusTable
OBJECT-TYPE
This table contains the status of the XPIC.
1.3.6.1.4.1.2281.10.7.8.2.3not-accessiblemandatory
genEquipRadioGroupsXPICStatusEntry
OBJECT-TYPE
This table entry contains the status of the XPIC.
1.3.6.1.4.1.2281.10.7.8.2.3.1not-accessiblemandatory
genEquipRadioGroupsXPICStatusGroupIfIndex
OBJECT-TYPE
The location of the group
1.3.6.1.4.1.2281.10.7.8.2.3.1.1INTEGERread-onlymandatory
genEquipRadioGroupsXPICStatusState
OBJECT-TYPE
The state of XPIC State Machine
1.3.6.1.4.1.2281.10.7.8.2.3.1.2XpicStateread-onlymandatory
genEquipRadioGroupsMR
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.8.3
genEquipRadioGroupsMRAttrTable
OBJECT-TYPE
MR config table.
1.3.6.1.4.1.2281.10.7.8.3.1not-accessiblemandatory
genEquipRadioGroupsMRAttrEntry
OBJECT-TYPE
MR config table entry.
1.3.6.1.4.1.2281.10.7.8.3.1.1not-accessiblemandatory
genEquipRadioGroupsMRAttrGroupIfIndex
OBJECT-TYPE
The location of the group
1.3.6.1.4.1.2281.10.7.8.3.1.1.1INTEGERread-onlymandatory
genEquipRadioGroupsMRAttrGroupId
OBJECT-TYPE
The Id of the radio MR group.
1.3.6.1.4.1.2281.10.7.8.3.1.1.2INTEGER (1..4)read-onlymandatory
genEquipRadioGroupsMRAttrAdmin
OBJECT-TYPE
MR Admin.
1.3.6.1.4.1.2281.10.7.8.3.1.1.3EnableDisableread-writemandatory
genEquipRadioGroupsMRAttrBlockRadioIfindex
OBJECT-TYPE
Block Radio ifindex.
1.3.6.1.4.1.2281.10.7.8.3.1.1.4INTEGERread-writemandatory
genEquipRadioGroupsMRAttrBlockRadioAdmin
OBJECT-TYPE
Block Radio Admin.
1.3.6.1.4.1.2281.10.7.8.3.1.1.5EnableDisableread-writemandatory
genEquipRadioGroupsMRAttrCopy2MateIfindex
OBJECT-TYPE
Copy2mate Radio ifindex.
1.3.6.1.4.1.2281.10.7.8.3.1.1.6INTEGERread-writemandatory
genEquipRadioGroupsMRAttrCopy2MateAdmin
OBJECT-TYPE
Copy2Mate Admin.
1.3.6.1.4.1.2281.10.7.8.3.1.1.7EnableDisableread-writemandatory
genEquipRadioGroupsMRAttrExBerAdmin
OBJECT-TYPE
Excessive BER Admin.
1.3.6.1.4.1.2281.10.7.8.3.1.1.8EnableDisableread-writemandatory
genEquipRadioGroupsMRAttrMinNumRadio
OBJECT-TYPE
Minimal num of radios.
1.3.6.1.4.1.2281.10.7.8.3.1.1.9INTEGERread-writemandatory
genEquipRadioGroupsMRAttrMinProfileAdmin
OBJECT-TYPE
Min ACM profile admin.
1.3.6.1.4.1.2281.10.7.8.3.1.1.10EnableDisableread-writemandatory
genEquipRadioGroupsMRAttrSigDegardeAdmin
OBJECT-TYPE
Signal Degrade Admin.
1.3.6.1.4.1.2281.10.7.8.3.1.1.11EnableDisableread-writemandatory
genEquipRadioGroupsMRMembersTable
OBJECT-TYPE
MR members table.
1.3.6.1.4.1.2281.10.7.8.3.2not-accessiblemandatory
genEquipRadioGroupsMRMembersEntry
OBJECT-TYPE
MR members table entry.
1.3.6.1.4.1.2281.10.7.8.3.2.1not-accessiblemandatory
genEquipRadioGroupsMRMembersIfIndexGroup
OBJECT-TYPE
The location of the radio MR group
1.3.6.1.4.1.2281.10.7.8.3.2.1.1INTEGERread-onlymandatory
genEquipRadioGroupsMRMembersMem1IfIndex
OBJECT-TYPE
The radio location of member 1.
1.3.6.1.4.1.2281.10.7.8.3.2.1.2INTEGERread-writemandatory
genEquipRadioGroupsMRMembersMem2IfIndex
OBJECT-TYPE
The radio location of member 2.
1.3.6.1.4.1.2281.10.7.8.3.2.1.3INTEGERread-writemandatory
genEquipRadioGroupsMRMembersRowStatus
OBJECT-TYPE
Row status to allow user add entries dynamically.
1.3.6.1.4.1.2281.10.7.8.3.2.1.30RowStatusread-writemandatory
genEquipRadioGroupsMRStatusTable
OBJECT-TYPE
MR Status table.
1.3.6.1.4.1.2281.10.7.8.3.3not-accessiblemandatory
genEquipRadioGroupsMRStatusEntry
OBJECT-TYPE
MR Status table entry.
1.3.6.1.4.1.2281.10.7.8.3.3.1not-accessiblemandatory
genEquipRadioGroupsMRStatusGroupIfIndex
OBJECT-TYPE
The location of the group
1.3.6.1.4.1.2281.10.7.8.3.3.1.1INTEGERread-onlymandatory
genEquipRadioGroupsMRStatusOpertionalState
OBJECT-TYPE
Operational State
1.3.6.1.4.1.2281.10.7.8.3.3.1.2INTEGERread-onlymandatory
genEquipRadioGroupsMRStatusRemoteOpertionalState
OBJECT-TYPE
Remote Operational State.
1.3.6.1.4.1.2281.10.7.8.3.3.1.3INTEGERread-onlymandatory
genEquipRadioGroupsMIMO
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.8.4
genEquipRadioGroupsMIMOAttrTable
OBJECT-TYPE
The configuration table of the MIMO groups.
1.3.6.1.4.1.2281.10.7.8.4.1not-accessiblemandatory
genEquipRadioGroupsMIMOAttrEntry
OBJECT-TYPE
The configuration table of the MIMO groups entry.
1.3.6.1.4.1.2281.10.7.8.4.1.1not-accessiblemandatory
genEquipRadioGroupsMIMOAttrGroupIfIndex
OBJECT-TYPE
MIMO configuration table index
1.3.6.1.4.1.2281.10.7.8.4.1.1.1INTEGERread-onlymandatory
genEquipRadioGroupsMIMOAttrRole
OBJECT-TYPE
Role can be Master or Slave.
1.3.6.1.4.1.2281.10.7.8.4.1.1.2INTEGER {slave(0), master(1), not-relevant(2)}read-writemandatory
genEquipRadioGroupsMIMOAttrAdmin
OBJECT-TYPE
Administrating state of the MIMO group.
1.3.6.1.4.1.2281.10.7.8.4.1.1.3EnableDisableread-writemandatory
genEquipRadioGroupsMIMOAttrResetStateMachine
OBJECT-TYPE
Reset MIMO state machine.
1.3.6.1.4.1.2281.10.7.8.4.1.1.4OffOnread-writemandatory
genEquipRadioGroupsMIMOMembersTable
OBJECT-TYPE
The description the radio carrier members of the MIMO groups.
1.3.6.1.4.1.2281.10.7.8.4.2not-accessiblemandatory
genEquipRadioGroupsMIMOMembersEntry
OBJECT-TYPE
The description the radio carrier members of the MIMO groups entry.
1.3.6.1.4.1.2281.10.7.8.4.2.1not-accessiblemandatory
genEquipRadioGroupsMIMOMembersGroupIfIndex
OBJECT-TYPE
MIMO members table index
1.3.6.1.4.1.2281.10.7.8.4.2.1.1INTEGERread-onlymandatory
genEquipRadioGroupsMIMOMembersGroupType
OBJECT-TYPE
Type of MIMO group: 2x2 or 4x4 etc...
1.3.6.1.4.1.2281.10.7.8.4.2.1.2INTEGER {mimo-2x2(0), mimo-4x4(1), base-band-combining-2x2(2), base-band-combining-4x4(3)}read-writemandatory
genEquipRadioGroupsMIMOMembersMem1IfIndex
OBJECT-TYPE
The radio location of member 1.
1.3.6.1.4.1.2281.10.7.8.4.2.1.3INTEGERread-writemandatory
genEquipRadioGroupsMIMOMembersMem2IfIndex
OBJECT-TYPE
The radio location of member 2.
1.3.6.1.4.1.2281.10.7.8.4.2.1.4INTEGERread-writemandatory
genEquipRadioGroupsMIMOMembersMem3IfIndex
OBJECT-TYPE
The radio location of member 3.
1.3.6.1.4.1.2281.10.7.8.4.2.1.5INTEGERread-writemandatory
genEquipRadioGroupsMIMOMembersMem4IfIndex
OBJECT-TYPE
The radio location of member 4.
1.3.6.1.4.1.2281.10.7.8.4.2.1.6INTEGERread-writemandatory
genEquipRadioGroupsMIMOMembersRowStatus
OBJECT-TYPE
Row status to allow user add entries dynamically.
1.3.6.1.4.1.2281.10.7.8.4.2.1.30RowStatusread-writemandatory
genEquipRadioGroupsMIMOStatusTable
OBJECT-TYPE
The current status table of the MIMO groups.
1.3.6.1.4.1.2281.10.7.8.4.3not-accessiblemandatory
genEquipRadioGroupsMIMOStatusEntry
OBJECT-TYPE
The current status table of the MIMO groups entry.
1.3.6.1.4.1.2281.10.7.8.4.3.1not-accessiblemandatory
genEquipRadioGroupsMIMOStatusGroupIfIndex
OBJECT-TYPE
MIMO status table index
1.3.6.1.4.1.2281.10.7.8.4.3.1.1INTEGERread-onlymandatory
genEquipRadioGroupsMIMOStatusState
OBJECT-TYPE
MIMO-State
1.3.6.1.4.1.2281.10.7.8.4.3.1.2INTEGER {slave(0), init(1), disabled(2), idle(3), recovery(4), half-capacity(5)}read-onlymandatory
genEquipRadioGroupsMIMOStatus1stMMI
OBJECT-TYPE
MIMO interference in dB of the 1st carrier.
1.3.6.1.4.1.2281.10.7.8.4.3.1.3INTEGERread-onlymandatory
genEquipRadioGroupsMIMOStatus2ndMMI
OBJECT-TYPE
MIMO interference in dB of the 2nd carrier.
1.3.6.1.4.1.2281.10.7.8.4.3.1.4INTEGERread-onlymandatory
genEquipRadioGroupsMIMOStatus3rdMMI
OBJECT-TYPE
MIMO interference in dB of the 3rd carrier.
1.3.6.1.4.1.2281.10.7.8.4.3.1.5INTEGERread-onlymandatory
genEquipRadioGroupsMIMOStatus4thMMI
OBJECT-TYPE
MIMO interference in dB of the 4th carrier.
1.3.6.1.4.1.2281.10.7.8.4.3.1.6INTEGERread-onlymandatory
genEquipRadioGroupsMIMOStatusAdvancedState
OBJECT-TYPE
MIMO advanced state.
1.3.6.1.4.1.2281.10.7.8.4.3.1.7INTEGER {disabled(0), initializing(1), init-retry(2), init-retry-checkup(3), init-retry-bringup(4), idle(5), unsuitable-hw(6), half-capacity(7), master-failure(8), remote-master-failure(9), remote-has-no-master(10), mute-slave(11), slave-init(12), slave-idle(13), slave-mutted(14), self-mute-comm-fail-to-master(15), half-capacity-no-master(16), half-capacity-master-failure(17)}read-onlymandatory
genEquipRadioGroupsAbc
OBJECT-IDENTITY
1.3.6.1.4.1.2281.10.7.8.5
genEquipRadioGroupsAbcAttrTable
OBJECT-TYPE
Multi Carrier ABC configuration table.
1.3.6.1.4.1.2281.10.7.8.5.1not-accessiblemandatory
genEquipRadioGroupsAbcAttrEntry
OBJECT-TYPE
Multi Carrier ABC configuration table.
1.3.6.1.4.1.2281.10.7.8.5.1.1not-accessiblemandatory
genEquipRadioGroupsAbcAttrIfIndex
OBJECT-TYPE
The interface-index of the ABC group
1.3.6.1.4.1.2281.10.7.8.5.1.1.1INTEGERread-onlymandatory
genEquipRadioGroupsAbcAttrGroupName
OBJECT-TYPE
Textual description of the ABC group.
1.3.6.1.4.1.2281.10.7.8.5.1.1.2DisplayStringread-writemandatory
genEquipRadioGroupsAbcAttrAdminState
OBJECT-TYPE
The Administrative state of ABC radio group which decides if the Multi Carrier ABC group is enabled or disabled.
1.3.6.1.4.1.2281.10.7.8.5.1.1.3EnableDisableread-writemandatory
genEquipRadioGroupsAbcAttrQnumberOfRadioMembers
OBJECT-TYPE
The number of radios that can be members of the Multi Carrier ABC group.
1.3.6.1.4.1.2281.10.7.8.5.1.1.4INTEGERread-writemandatory
genEquipRadioGroupsAbcAttrProtectionEnable
OBJECT-TYPE
When Protection is Enabled protecion groups can be added to the Multi-carrier ABC group. When disabled regular channels can be attached.
1.3.6.1.4.1.2281.10.7.8.5.1.1.5EnableDisableread-writemandatory
genEquipRadioGroupsAbcAttrHighPriEthernetBandwidth
OBJECT-TYPE
Bandwidth reserved for high priority ethernet in Kbps. Values range from from 0 (i.e. No high pri ethernet) to max capacity (I.e. no STM-1s) in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.1.1.6INTEGERread-writemandatory
genEquipRadioGroupsAbcAttrQualityThreshold
OBJECT-TYPE
Members degrading below this threshold will be set to 'do not use' in the group.
1.3.6.1.4.1.2281.10.7.8.5.1.1.7INTEGERread-writemandatory
genEquipRadioGroupsAbcAttrRowStatus
OBJECT-TYPE
This is the row status.
1.3.6.1.4.1.2281.10.7.8.5.1.1.30RowStatusread-writemandatory
genEquipRadioGroupsAbcMembersTable
OBJECT-TYPE
Multi Carrier ABC members table.
1.3.6.1.4.1.2281.10.7.8.5.2not-accessiblemandatory
genEquipRadioGroupsAbcMembersEntry
OBJECT-TYPE
Multi Carrier ABC members table entry.
1.3.6.1.4.1.2281.10.7.8.5.2.1not-accessiblemandatory
genEquipRadioGroupsAbcMembersGroupIfIndex
OBJECT-TYPE
Integer representing the group interface ifindex
1.3.6.1.4.1.2281.10.7.8.5.2.1.1INTEGERread-onlymandatory
genEquipRadioGroupsAbcMembersGroupId
OBJECT-TYPE
Integer representing the group interface ID.
1.3.6.1.4.1.2281.10.7.8.5.2.1.2INTEGERread-onlymandatory
genEquipRadioGroupsAbcMembersChannel1MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.3INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel1adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.4EnableDisableread-writemandatory
genEquipRadioGroupsAbcMembersChannel2MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.5INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel2adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.6EnableDisableread-writemandatory
genEquipRadioGroupsAbcMembersChannel3MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.7INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel3adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.8EnableDisableread-writemandatory
genEquipRadioGroupsAbcMembersChannel4MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.9INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel4adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.10EnableDisableread-writemandatory
genEquipRadioGroupsAbcMembersChannel5MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.11INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel5adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.12EnableDisableread-writemandatory
genEquipRadioGroupsAbcMembersChannel6MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.13INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel6adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.14EnableDisableread-writemandatory
genEquipRadioGroupsAbcMembersChannel7MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.15INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel7adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.16EnableDisableread-writemandatory
genEquipRadioGroupsAbcMembersChannel8MemberIfIndex
OBJECT-TYPE
IfIndex representing the group member connect to this ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.17INTEGERread-writemandatory
genEquipRadioGroupsAbcMembersChannel8adminState
OBJECT-TYPE
The Administrative state of an ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.2.1.18EnableDisableread-writemandatory
genEquipRadioGroupsAbcStatusTable
OBJECT-TYPE
Multi Carrier ABC status table.
1.3.6.1.4.1.2281.10.7.8.5.3not-accessiblemandatory
genEquipRadioGroupsAbcStatusEntry
OBJECT-TYPE
Multi Carrier ABC status table entry.
1.3.6.1.4.1.2281.10.7.8.5.3.1not-accessiblemandatory
genEquipRadioGroupsAbcStatusIfIndex
OBJECT-TYPE
The interface-index of the ABC group
1.3.6.1.4.1.2281.10.7.8.5.3.1.1INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusOperState
OBJECT-TYPE
The operational state of the ABC group as a WAN.
1.3.6.1.4.1.2281.10.7.8.5.3.1.2DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusRemoteOperState
OBJECT-TYPE
The remote ABC groups operational state.
1.3.6.1.4.1.2281.10.7.8.5.3.1.3DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityRX
OBJECT-TYPE
The combined current RX throughput capacity of the ABC group in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.4INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityTX
OBJECT-TYPE
The combined current TX throughput capacity of the ABC group in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.5INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel1Operstate
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.6DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel1Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.7INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel2Operstate
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.8DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel2Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.9INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel3OperState
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.10DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel3Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.11INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel4OperState
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.12DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel4Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.13INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel5OperState
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.14DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel5Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.15INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel6OperState
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.16DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel6Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.17INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel7OperState
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.18DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel7Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.19INTEGERread-onlymandatory
genEquipRadioGroupsAbcStatusChannel8OperState
OBJECT-TYPE
The operational state of the ABC channel.
1.3.6.1.4.1.2281.10.7.8.5.3.1.20DownUpread-onlymandatory
genEquipRadioGroupsAbcStatusChannel8Capacity
OBJECT-TYPE
The current throughput capacity of the ABC channel in Kbps.
1.3.6.1.4.1.2281.10.7.8.5.3.1.21INTEGERread-onlymandatory
genEquipStm1AbcAttrTable
OBJECT-TYPE
Multi Carrier ABC stm1 table.
1.3.6.1.4.1.2281.10.7.8.5.5not-accessiblemandatory
genEquipStm1AbcAttrEntry
OBJECT-TYPE
Multi Carrier ABC stm1 table entry.
1.3.6.1.4.1.2281.10.7.8.5.5.1not-accessiblemandatory
genEquipStm1AbcAttrIfIndex
OBJECT-TYPE
The interface-index of the ABC group
1.3.6.1.4.1.2281.10.7.8.5.5.1.1INTEGERread-onlymandatory
genEquipStm1AbcAttrGroupId
OBJECT-TYPE
Integer representing the group interface ID.
1.3.6.1.4.1.2281.10.7.8.5.5.1.2INTEGERread-onlymandatory
genEquipStm1AbcAttrNumberOfMembers
OBJECT-TYPE
The number of STM-1/OC-3 channels that can be members of the Multi Carrier ABC group.
1.3.6.1.4.1.2281.10.7.8.5.5.1.3INTEGERread-writemandatory
genEquipStm1AbcAttrPri1IfIndex
OBJECT-TYPE
Location of the highest priority STM-1/OC-3 interface.
1.3.6.1.4.1.2281.10.7.8.5.5.1.4INTEGERread-writemandatory
genEquipStm1AbcAttrPri2IfIndex
OBJECT-TYPE
Location of the highest priority STM-1/OC-3 interface.
1.3.6.1.4.1.2281.10.7.8.5.5.1.5INTEGERread-writemandatory
genEquipStm1AbcAttrPri3IfIndex
OBJECT-TYPE
Location of the highest priority STM-1/OC-3 interface.
1.3.6.1.4.1.2281.10.7.8.5.5.1.6INTEGERread-writemandatory
genEquipStm1AbcAttrPri4IfIndex
OBJECT-TYPE
Location of the highest priority STM-1/OC-3 interface.
1.3.6.1.4.1.2281.10.7.8.5.5.1.7INTEGERread-writemandatory