LLDP-EXT-MED-MIB
- Registered at
- 1.0.8802.1.1.2.1.5.4795
- Last updated
- 2005-07-28 00:00
- Organization
- TIA TR41.4 Working Group
- Revisions
- 2005-07-28 00:00
- Namespace
- standard
- Source file
LLDP-EXT-MED-MIB- Digest
sha256:f1c25c3fa5b980faeadbc4f8cee7ae4d60f2b5eec97dad3bd4fe76e901d5cbf1
Description
The LLDP Management Information Base extension module for TIA-TR41.4 media endpoint discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXMedMIB is branched from lldpExtensions using the TIA OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Copyright (C) TIA (2005). This version of this MIB module is published as Section 13.3 of ANSI/TIA-1057. See the standard itself for full legal notices.
Contact
WG-URL: http://www.tiaonline.org/standards/sfg/scope.cfm#TR-41.4 WG-EMail: tr41@tiacomm.org Contact: Chair, TIA TR-41 Postal: Telecommunications Industry Association 2500 Wilson Blvd., Suite 300 Arlington, VA 22201 USA Tel: (703) 907-7700 E-mail: tr41@tiacomm.org
Imports
| From | Symbols |
|---|---|
| DIFFSERV-DSCP-TC | Dscp |
| LLDP-MIB | lldpExtensions, lldpLocPortNum, lldpPortConfigEntry, lldpRemChassisId, lldpRemChassisIdSubtype, lldpRemIndex, lldpRemLocalPortNum, lldpRemTimeMark |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
3 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DIFFSERV-DSCP-TC IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB LLDP-EXT-MED-MIB LLDP-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| LldpXMedCapabilities TEXTUAL-CONVENTION Bitmap that includes the MED organizationally defined set of LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED TLV. Having the bit 'capabilities(0)' set indicates that the LLDP agent refers to the Capabilities TLVs. Having the bit 'networkPolicy(1)' set indicates that the LLDP agent refers to the Network Policy TLVs. Having the bit 'location(2)' set indicates that the LLDP agent refers to the Emergency Communications System Location TLVs. Having the bit 'extendedPSE(3)' set indicates that the LLDP agent refers to the Extended PoE TLVs with PSE capabilities. Having the bit 'extendedPD(4)' set indicates that the LLDP agent refers to the Extended PoE TLVs with PD capabilities. Having the bit 'inventory(5)' set indicates that the LLDP agent refers to the Hardware Revision, Firmware Revision, Software Revision, Serial Number, Manufacturer Name, Model Name, and Asset ID TLVs. | current | |||
| LldpXMedDeviceClass TEXTUAL-CONVENTION Device Class to which the device is a member. A value of notDefined(0) indicates that the device has capabilities not covered by any of the LLDP-MED classes. A value of endpointClass1(1) indicates that the device has endpoint class 1 capabilities. A value of endpointClass2(2) indicates that the device has endpoint class 2 capabilities. A value of endpointClass3(3) indicates that the device has endpoint class 3 capabilities. A value of networkConnectivity(4) indicates that the device has network connectivity device capabilities. | current | |||
| LocationSubtype TEXTUAL-CONVENTION The location subtype advertised by the remote endpoint. A value coordinateBased(2) indicates that the location subtype advertised by the endpoint is defined to use the relevant sub- fields of the DHCP option for Coordinate LCI as specified in ANSI/TIA-1057, Section 10.2.4.3.1. A value civicAddress(3) indicates that the location subtype advertised by the endpoint is defined to use the relevant sub- fields of the DHCP option for Civic Address as specified in ANSI/TIA-1057, Section 10.2.4.3.2. A value elin(4) indicates that the location subtype advertised by the endpoint is defined to use the Emergency Location Information Number (ELIN) as specified in ANSI/TIA-1057, Section 10.2.4.3.3. | current | |||
| PolicyAppType TEXTUAL-CONVENTION The media type that defines the primary function of the application for the policy advertised by an endpoint. Having the bit voice(1) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice. Having the bit voiceSignaling(3) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice signaling. Having the bit guestVoice(4) set indicates that the media type Defining a primary function of the application for the policy advertised on the local port is guest voice. Having the bit guestVoiceSignaling(5) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is guest voice signaling. Having the bit softPhoneVoice(6) set indicates that the media type Defining a primary function of the application for the policy advertised on the local port is softphone voice. Having the bit videoConferencing(7) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice. Having the bit streamingVideo(8) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is streaming video. Having the bit videoSignaling(2) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is video signaling. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| lldpXMedNotifications OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.0 | |||
| lldpXMedObjects OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.1 | |||
| lldpXMedConfig OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.1.1 | |||
| lldpXMedLocDeviceClass OBJECT-TYPE Local Device Class. | 1.0.8802.1.1.2.1.5.4795.1.1.1 | LldpXMedDeviceClass | read-only | current |
| lldpXMedPortConfigTable OBJECT-TYPE A table that controls selection of LLDP TLVs to be transmitted on individual ports. | 1.0.8802.1.1.2.1.5.4795.1.1.2 | not-accessible | current | |
| lldpXMedPortConfigEntry OBJECT-TYPE LLDP configuration information that controls the transmission of the MED organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpXMedPortConfigEntry must be stored and retrieved from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.4795.1.1.2.1 | not-accessible | current | |
| lldpXMedPortCapSupported OBJECT-TYPE The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent supports the corresponding TLV. | 1.0.8802.1.1.2.1.5.4795.1.1.2.1.1 | LldpXMedCapabilities | read-only | current |
| lldpXMedPortConfigTLVsTxEnable OBJECT-TYPE The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent will send the corresponding TLV if the respective capability is supported per port. Setting a bit with in this object for a non-supported capability shall have no functional effect and will result in an inconsistent value error returned to the management application. There are other rules and restrictions that prevent arbitrary combinations of TLVs to be enabled on LLDP-MED devices according to the device classes. These rules are defined in Section 10.2.1, Tables 5 - 9 of ANSI/TIA-1057. In case a management application attempts to set this object to a value that does not follow the rules, the set operation shall have and will result in an inconsistent value error returned to the management application. Setting this object to an empty set is valid and effectively disables LLDP-MED on a per-port basis by disabling transmission of all MED organizational TLVs. In this case the remote tables objects in the LLDP-MED MIB corresponding to the respective port will not be populated. The default value for lldpXMedPortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.4795.1.1.2.1.2 | LldpXMedCapabilities | read-write | current |
| lldpXMedPortConfigNotifEnable OBJECT-TYPE A value of 'true(1)' enables sending the topology change traps on this port. A value of 'false(2)' disables sending the topology change traps on this port. | 1.0.8802.1.1.2.1.5.4795.1.1.2.1.3 | TruthValue | read-write | current |
| lldpXMedFastStartRepeatCount OBJECT-TYPE The number of times the fast start LLDPDU are being sent during the activation of the fast start mechanism defined by LLDP-MED. | 1.0.8802.1.1.2.1.5.4795.1.1.3 | Unsigned32 (1..10) | read-write | current |
| lldpXMedLocalData OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.1.2 | |||
| lldpXMedLocMediaPolicyTable OBJECT-TYPE This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to this agent. | 1.0.8802.1.1.2.1.5.4795.1.2.1 | not-accessible | current | |
| lldpXMedLocMediaPolicyEntry OBJECT-TYPE Information about a particular policy on a specific port component. | 1.0.8802.1.1.2.1.5.4795.1.2.1.1 | not-accessible | current | |
| lldpXMedLocMediaPolicyAppType OBJECT-TYPE The media type that defines the primary function of the application for the policy advertised by an endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.1.1.1 | PolicyAppType | not-accessible | current |
| lldpXMedLocMediaPolicyVlanID OBJECT-TYPE An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use. | 1.0.8802.1.1.2.1.5.4795.1.2.1.1.2 | Integer32 (0 | 1..4094 | 4095) | read-only | current |
| lldpXMedLocMediaPolicyPriority OBJECT-TYPE This object contains the value of the 802.1p priority which is associated with the given port on the local system. | 1.0.8802.1.1.2.1.5.4795.1.2.1.1.3 | Integer32 (0..7) | read-only | current |
| lldpXMedLocMediaPolicyDscp OBJECT-TYPE This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system. | 1.0.8802.1.1.2.1.5.4795.1.2.1.1.4 | Dscp | read-only | current |
| lldpXMedLocMediaPolicyUnknown OBJECT-TYPE A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined | 1.0.8802.1.1.2.1.5.4795.1.2.1.1.5 | TruthValue | read-only | current |
| lldpXMedLocMediaPolicyTagged OBJECT-TYPE A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance | 1.0.8802.1.1.2.1.5.4795.1.2.1.1.6 | TruthValue | read-only | current |
| lldpXMedLocHardwareRev OBJECT-TYPE The vendor-specific hardware revision string as advertised by the endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.2 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedLocFirmwareRev OBJECT-TYPE The vendor-specific firmware revision string as advertised by the endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.3 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedLocSoftwareRev OBJECT-TYPE The vendor-specific software revision string as advertised by the endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.4 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedLocSerialNum OBJECT-TYPE The vendor-specific serial number as advertised by the endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.5 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedLocMfgName OBJECT-TYPE The vendor-specific manufacturer name as advertised by the endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.6 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedLocModelName OBJECT-TYPE The vendor-specific model name as advertised by the endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.7 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedLocAssetID OBJECT-TYPE The vendor-specific asset tracking identifier as advertised by the endpoint. | 1.0.8802.1.1.2.1.5.4795.1.2.8 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedLocLocationTable OBJECT-TYPE This table contains Location information as advertised by the local system. The information may be configured per port by a Location Information Server (LIS) or other management application. Multiple Location TLVs of different subtypes may be transmitted in the same PDU. The information in this table MUST be stored in non-volatile-memory and persist over restart/reboot sequences. | 1.0.8802.1.1.2.1.5.4795.1.2.9 | not-accessible | current | |
| lldpXMedLocLocationEntry OBJECT-TYPE Information about Location information for the local device. | 1.0.8802.1.1.2.1.5.4795.1.2.9.1 | not-accessible | current | |
| lldpXMedLocLocationSubtype OBJECT-TYPE The location subtype advertised by the local device. | 1.0.8802.1.1.2.1.5.4795.1.2.9.1.1 | LocationSubtype | not-accessible | current |
| lldpXMedLocLocationInfo OBJECT-TYPE The location information. Parsing of this information is dependent upon the location subtype, as defined by the value of the lldpXMedLocLocationSubtype object. | 1.0.8802.1.1.2.1.5.4795.1.2.9.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| lldpXMedLocXPoEDeviceType OBJECT-TYPE Defines the type of Power-via-MDI (Power over Ethernet) advertised by the local device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A value pdDevice(3) indicates that the device is advertised as a Powered Device (PD). A value of none(4) indicates that the device does not support PoE. | 1.0.8802.1.1.2.1.5.4795.1.2.10 | INTEGER {unknown(1), pseDevice(2), pdDevice(3), none(4)} | read-only | current |
| lldpXMedLocXPoEPSEPortTable OBJECT-TYPE This table contains one row per port of PSE PoE information on the local system known to this agent. | 1.0.8802.1.1.2.1.5.4795.1.2.11 | not-accessible | current | |
| lldpXMedLocXPoEPSEPortEntry OBJECT-TYPE Information about a particular port PoE information. | 1.0.8802.1.1.2.1.5.4795.1.2.11.1 | not-accessible | current | |
| lldpXMedLocXPoEPSEPortPowerAv OBJECT-TYPE This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts. | 1.0.8802.1.1.2.1.5.4795.1.2.11.1.1 | Gauge32 (0..1023) | read-only | current |
| lldpXMedLocXPoEPSEPortPDPriority OBJECT-TYPE Reflects the PD power priority that is being advertised on this PSE port. If both locally configure priority and ldpXMedRemXPoEPDPowerPriority are available on this port, it is a matter of local policy which one takes precedence. This object reflects the active value on this port. If the priority is not configured or known by the PD, the value unknown(1) will be returned. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power Priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power Priority as low, as per RFC 3621. | 1.0.8802.1.1.2.1.5.4795.1.2.11.1.2 | INTEGER {unknown(1), critical(2), high(3), low(4)} | read-only | current |
| lldpXMedLocXPoEPSEPowerSource OBJECT-TYPE Defines the type of PSE Power Source advertised by the local device. A value primary(2) indicates that the device advertises its power source as primary. A value backup(3) indicates that the device advertises its power Source as backup. | 1.0.8802.1.1.2.1.5.4795.1.2.12 | INTEGER {unknown(1), primary(2), backup(3)} | read-only | current |
| lldpXMedLocXPoEPDPowerReq OBJECT-TYPE This object contains the value of the power required by a PD expressed in units of 0.1 watts. | 1.0.8802.1.1.2.1.5.4795.1.2.13 | Gauge32 (0..1023) | read-only | current |
| lldpXMedLocXPoEPDPowerSource OBJECT-TYPE Defines the type of Power Source advertised as being used by the local device. A value fromPSE(2) indicates that the device advertises its power source as received from a PSE. A value local(3) indicates that the device advertises its power source as local. A value localAndPSE(4) indicates that the device advertises its power source as using both local and PSE power. | 1.0.8802.1.1.2.1.5.4795.1.2.14 | INTEGER {unknown(1), fromPSE(2), local(3), localAndPSE(4)} | read-only | current |
| lldpXMedLocXPoEPDPowerPriority OBJECT-TYPE Defines the priority advertised as being required by this PD. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power Priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power Priority as low, as per RFC 3621. | 1.0.8802.1.1.2.1.5.4795.1.2.15 | INTEGER {unknown(1), critical(2), high(3), low(4)} | read-only | current |
| lldpXMedRemoteData OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.1.3 | |||
| lldpXMedRemCapabilitiesTable OBJECT-TYPE A table that displays LLDP-MED capabilities of remote devices connected to individual ports. | 1.0.8802.1.1.2.1.5.4795.1.3.1 | not-accessible | current | |
| lldpXMedRemCapabilitiesEntry OBJECT-TYPE LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED. The remote tables in the LLDP-MED MIB excepting this table may be sparsely populate. An entry in one of these table is meaningful and shall be populated by the agent only if the corresponding bits for the respective function are set in the objects in this table. | 1.0.8802.1.1.2.1.5.4795.1.3.1.1 | not-accessible | current | |
| lldpXMedRemCapSupported OBJECT-TYPE The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent has the capability to support the corresponding TLV. | 1.0.8802.1.1.2.1.5.4795.1.3.1.1.1 | LldpXMedCapabilities | read-only | current |
| lldpXMedRemCapCurrent OBJECT-TYPE The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent currently supports the corresponding TLV. | 1.0.8802.1.1.2.1.5.4795.1.3.1.1.2 | LldpXMedCapabilities | read-only | current |
| lldpXMedRemDeviceClass OBJECT-TYPE Device Class as advertised by the device remotely connected to the port. | 1.0.8802.1.1.2.1.5.4795.1.3.1.1.3 | LldpXMedDeviceClass | read-only | current |
| lldpXMedRemMediaPolicyTable OBJECT-TYPE This table contains media policy information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the networkPolicy(0) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set. | 1.0.8802.1.1.2.1.5.4795.1.3.2 | not-accessible | current | |
| lldpXMedRemMediaPolicyEntry OBJECT-TYPE Information about the per port per policy type policy information for a particular physical network connection. | 1.0.8802.1.1.2.1.5.4795.1.3.2.1 | not-accessible | current | |
| lldpXMedRemMediaPolicyAppType OBJECT-TYPE The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port. | 1.0.8802.1.1.2.1.5.4795.1.3.2.1.1 | PolicyAppType | not-accessible | current |
| lldpXMedRemMediaPolicyVlanID OBJECT-TYPE An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use. | 1.0.8802.1.1.2.1.5.4795.1.3.2.1.2 | Integer32 (0 | 1..4094 | 4095) | read-only | current |
| lldpXMedRemMediaPolicyPriority OBJECT-TYPE This object contains the value of the 802.1p priority which is associated with the remote system connected at given port. | 1.0.8802.1.1.2.1.5.4795.1.3.2.1.3 | Integer32 (0..7) | read-only | current |
| lldpXMedRemMediaPolicyDscp OBJECT-TYPE This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port. | 1.0.8802.1.1.2.1.5.4795.1.3.2.1.4 | Dscp | read-only | current |
| lldpXMedRemMediaPolicyUnknown OBJECT-TYPE A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined. | 1.0.8802.1.1.2.1.5.4795.1.3.2.1.5 | TruthValue | read-only | current |
| lldpXMedRemMediaPolicyTagged OBJECT-TYPE A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance | 1.0.8802.1.1.2.1.5.4795.1.3.2.1.6 | TruthValue | read-only | current |
| lldpXMedRemInventoryTable OBJECT-TYPE This table contains inventory information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the inventory(2) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set | 1.0.8802.1.1.2.1.5.4795.1.3.3 | not-accessible | current | |
| lldpXMedRemInventoryEntry OBJECT-TYPE Information about inventory information for the remote devices connected to the ports. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1 | not-accessible | current | |
| lldpXMedRemHardwareRev OBJECT-TYPE The vendor-specific hardware revision string as advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1.1 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedRemFirmwareRev OBJECT-TYPE The vendor-specific firmware revision string as advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1.2 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedRemSoftwareRev OBJECT-TYPE The vendor-specific software revision string as advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1.3 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedRemSerialNum OBJECT-TYPE The vendor-specific serial number as advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1.4 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedRemMfgName OBJECT-TYPE The vendor-specific manufacturer name as advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1.5 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedRemModelName OBJECT-TYPE The vendor-specific model name as advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1.6 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedRemAssetID OBJECT-TYPE The vendor-specific asset tracking identifier as advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.3.1.7 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| lldpXMedRemLocationTable OBJECT-TYPE This table contains Location information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the Location(3) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set | 1.0.8802.1.1.2.1.5.4795.1.3.4 | not-accessible | current | |
| lldpXMedRemLocationEntry OBJECT-TYPE Information about Location information for the remote devices connected to the ports. | 1.0.8802.1.1.2.1.5.4795.1.3.4.1 | not-accessible | current | |
| lldpXMedRemLocationSubtype OBJECT-TYPE The location subtype advertised by the remote endpoint. | 1.0.8802.1.1.2.1.5.4795.1.3.4.1.1 | LocationSubtype | not-accessible | current |
| lldpXMedRemLocationInfo OBJECT-TYPE The location information advertised by the remote endpoint. Parsing of this information is dependent upon the location subtype, as defined by the value of the corresponding lldpXMedRemLocationSubType object. | 1.0.8802.1.1.2.1.5.4795.1.3.4.1.2 | OCTET STRING (SIZE(0..256)) | read-only | current |
| lldpXMedRemXPoETable OBJECT-TYPE This table contains information about the PoE device type as advertised by the remote system. This table is densely populated. | 1.0.8802.1.1.2.1.5.4795.1.3.5 | not-accessible | current | |
| lldpXMedRemXPoEEntry OBJECT-TYPE Information about PoE type of the remote devices connected to the ports. | 1.0.8802.1.1.2.1.5.4795.1.3.5.1 | not-accessible | current | |
| lldpXMedRemXPoEDeviceType OBJECT-TYPE Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A value pdDevice(3) indicates that the device is advertised as a Powered Device (PD). A value none(4) indicates that the device does not support PoE. | 1.0.8802.1.1.2.1.5.4795.1.3.5.1.1 | INTEGER {unknown(1), pseDevice(2), pdDevice(3), none(4)} | read-only | current |
| lldpXMedRemXPoEPSETable OBJECT-TYPE This table contains extended PoE information as advertised by the remote devices of PSE type. This table may be sparsely populated. Entries in this table are relevant only if the extendedPSE(4) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set | 1.0.8802.1.1.2.1.5.4795.1.3.6 | not-accessible | current | |
| lldpXMedRemXPoEPSEEntry OBJECT-TYPE Information about Extended PoE PSE information for the remote devices connected to the ports. | 1.0.8802.1.1.2.1.5.4795.1.3.6.1 | not-accessible | current | |
| lldpXMedRemXPoEPSEPowerAv OBJECT-TYPE This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device. | 1.0.8802.1.1.2.1.5.4795.1.3.6.1.1 | Gauge32 (0..1023) | read-only | current |
| lldpXMedRemXPoEPSEPowerSource OBJECT-TYPE Defines the type of PSE Power Source advertised by the remote device. A value primary(2) indicates that the device advertises its power source as primary. A value backup(3) indicates that the device advertises its power Source as backup. | 1.0.8802.1.1.2.1.5.4795.1.3.6.1.2 | INTEGER {unknown(1), primary(2), backup(3)} | read-only | current |
| lldpXMedRemXPoEPSEPowerPriority OBJECT-TYPE This object contains the value of the PSE power priority advertised by the remote device. A value critical(2) indicates that the device advertises its power priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power priority as low, as per RFC 3621. | 1.0.8802.1.1.2.1.5.4795.1.3.6.1.3 | INTEGER {unknown(1), critical(2), high(3), low(4)} | read-only | current |
| lldpXMedRemXPoEPDTable OBJECT-TYPE This table contains extended PoE information as advertised by the remote devices of PD type. This table may be sparsely populated. Entries in this table are relevant only if the extendedPD(5) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set | 1.0.8802.1.1.2.1.5.4795.1.3.7 | not-accessible | current | |
| lldpXMedRemXPoEPDEntry OBJECT-TYPE Information about XPoEPD information for the remote devices connected to the ports. | 1.0.8802.1.1.2.1.5.4795.1.3.7.1 | not-accessible | current | |
| lldpXMedRemXPoEPDPowerReq OBJECT-TYPE This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts. | 1.0.8802.1.1.2.1.5.4795.1.3.7.1.1 | Gauge32 (0..1023) | read-only | current |
| lldpXMedRemXPoEPDPowerSource OBJECT-TYPE Defines the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises its power source as received from a PSE. A value local(3) indicates that the device advertises its power source as local. A value localAndPSE(4) indicates that the device advertises its power source as using both local and PSE power. | 1.0.8802.1.1.2.1.5.4795.1.3.7.1.2 | INTEGER {unknown(1), fromPSE(2), local(3), localAndPSE(4)} | read-only | current |
| lldpXMedRemXPoEPDPowerPriority OBJECT-TYPE Defines the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power Priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power Priority as low, as per RFC 3621. | 1.0.8802.1.1.2.1.5.4795.1.3.7.1.3 | INTEGER {unknown(1), critical(2), high(3), low(4)} | read-only | current |
| lldpXMedConformance OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.2 | |||
| lldpXMedCompliances OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.2.1 | |||
| lldpXMedGroups OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.4795.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| lldpXMedTopologyChangeDetected NOTIFICATION-TYPE A notification generated by the local device sensing a change in the topology that indicates that a new remote device attached to a local port, or a remote device disconnected or moved from one port to another. | 1.0.8802.1.1.2.1.5.4795.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| lldpXMedCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities which implement the LLDP MED extension MIB. | 1.0.8802.1.1.2.1.5.4795.2.1.1 | current |
| lldpXMedConfigGroup OBJECT-GROUP The collection of objects which are used to configure or describe the configuration or behavior of the LLDP-MED organizational extension implementation. | 1.0.8802.1.1.2.1.5.4795.2.2.1 | current |
| lldpXMedOptMediaPolicyGroup OBJECT-GROUP The collection of objects which are used to represent LLDP MED organizational extensions for Media Policy Information. | 1.0.8802.1.1.2.1.5.4795.2.2.2 | current |
| lldpXMedOptInventoryGroup OBJECT-GROUP The collection of objects which are used to represent LLDP MED organizational extension for inventory Information. | 1.0.8802.1.1.2.1.5.4795.2.2.3 | current |
| lldpXMedOptLocationGroup OBJECT-GROUP The collection of objects which are used to represent LLDP MED organizational extension for Location Information. | 1.0.8802.1.1.2.1.5.4795.2.2.4 | current |
| lldpXMedOptPoEPSEGroup OBJECT-GROUP The collection of objects which are used to represent LLDP MED organizational extensions for PoE PSE Information. | 1.0.8802.1.1.2.1.5.4795.2.2.5 | current |
| lldpXMedOptPoEPDGroup OBJECT-GROUP The collection of objects which are used to represent LLDP MED organizational extensions for PoE PD Information. | 1.0.8802.1.1.2.1.5.4795.2.2.6 | current |
| lldpXMedRemSysGroup OBJECT-GROUP The collection of objects which are used to represent LLDP- MED organizational extension Remote Device Information. | 1.0.8802.1.1.2.1.5.4795.2.2.7 | current |
| lldpXMedNotificationsGroup NOTIFICATION-GROUP Notifications sent by an LLDP-MED agent. | 1.0.8802.1.1.2.1.5.4795.2.2.8 | current |