CISCOSB-LLDP-MIB
- Registered at
- 1.3.6.1.4.1.9.6.1.101.110
- Last updated
- 2005-06-20 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2005-06-20 00:00
- Namespace
- cisco
- Source file
CISCOSB-LLDP-MIB- Digest
sha256:14371009da4b27e9b1f847fc01d888551fa9f25e980858511cc5c0e349d2ca3e
Description
This private MIB module adds MIBs to LLDP (Link Layer Discovery Protocol).
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-DEVICEPARAMS-MIB | rndErrorDesc, rndErrorSeverity |
| CISCOSB-MIB | rndNotifications, switch001 |
| DIFFSERV-DSCP-TC | Dscp |
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| INET-ADDRESS-MIB | InetAddress, InetAddressType, InetVersion |
| LLDP-EXT-MED-MIB | LldpXMedCapabilities |
| LLDP-MIB | LldpManAddress, LldpPortList, LldpPortNumber, lldpPortConfigEntry, lldpRemEntry, lldpRemIndex, lldpRemLocalPortNum, lldpRemTimeMark |
| LLDP-V2-MIB | lldpV2LocPortIfIndex, lldpV2RemLocalIfIndex |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB CISCOSB-DEVICEPARAMS-MIB CISCOSB-LLDP-MIB CISCOSB-MIB DIFFSERV-DSCP-TC IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB LLDP-EXT-MED-MIB LLDP-MIB LLDP-V2-MIB LLDP-V2-TC-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PolicyAppVoiceUpdateMode TEXTUAL-CONVENTION | current | |||
| PolicyContainerAppType TEXTUAL-CONVENTION The media type that defines the primary function of the application for the policy advertised by an endpoint. A value of voice(1) indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice. A value of voiceSignaling(3) indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice signaling. A value of guestVoice(4) indicates that the media type Defining a primary function of the application for the policy advertised on the local port is guest voice. A value of guestVoiceSignaling(5) indicates that the media type defining a primary function of the application for the policy advertised on the local port is guest voice signaling. A value of softPhoneVoice(6) indicates that the media type Defining a primary function of the application for the policy advertised on the local port is softphone voice. A value of videoConferencing(7) indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice. A value of streamingVideo(8) indicates that the media type defining a primary function of the application for the policy advertised on the local port is streaming video. A value of videoSignaling(2) indicates that the media type defining a primary function of the application for the policy advertised on the local port is video signaling. | current | |||
| PolicyNumber TEXTUAL-CONVENTION Policy Number in the Media Policy Container. Policy numbers should be in the range of 1 and 32768 since 8 policies can be configured for each particular port and the number of ports range is 1 to 4096. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlLldpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1 | |||
| rlLldpConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1.1 | |||
| rlLldpEnabled OBJECT-TYPE Setting this variable to 'true' will globally enable the LLDP feature (both transmit and receive functionalities). Setting this variable to 'false' will globally disable the LLDP feature. Thus, the administratively desired status of a local port is determined by both this variable and the MIB lldpPortConfigAdminStatus. | 1.3.6.1.4.1.9.6.1.101.110.1.1.1 | TruthValue | read-write | current |
| rlLldpClearRx OBJECT-TYPE A set of ports that are identified by a PortList, in which each port is represented as a bit. Clears the Rx information about the remote agents accordingly to the specified PortList. The default value for rlLldpClearRx object is an empty binary string, which means no ports are specified to be cleared from the Rx Info. This object behaviors as an event (write-only) than reading this object always results in an Empty Port List of length zero. | 1.3.6.1.4.1.9.6.1.101.110.1.1.2 | PortList | read-write | current |
| rlLldpDuMode OBJECT-TYPE Action with LLDPDU upon globally disabled LLDP. If the associated rlLldpDuMode object has a value of 'filtering(1)', then received frames are containing LLDPDU will be dropped. If the associated rlLldpDuMode object has a value of 'flooding(2)', then received frames are containing LLDPDU will flood all active ports. | 1.3.6.1.4.1.9.6.1.101.110.1.1.3 | INTEGER {filtering(1), flooding(2)} | read-write | current |
| rlLldpAutoAdvLocPortManAddrTable OBJECT-TYPE This table contains automaticaly selected management address, advertised on the local port. | 1.3.6.1.4.1.9.6.1.101.110.1.1.4 | not-accessible | current | |
| rlLldpAutoAdvLocPortManAddrEntry OBJECT-TYPE Information about a local port, which advertises the Management address automatically. Entry also included an interface number, on which the Management address is assigned. Each management address should have distinct 'management address type' (rlLldpAutoAdvManAddrSubtype) and 'management address' (rlLldpAutoAdvManAddr). | 1.3.6.1.4.1.9.6.1.101.110.1.1.4.1 | not-accessible | current | |
| rlLldpAutoAdvLocPortNum OBJECT-TYPE The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the rlLldpAutoAdvLocPortManAddrTable. | 1.3.6.1.4.1.9.6.1.101.110.1.1.4.1.1 | LldpPortNumber | not-accessible | current |
| rlLldpAutoAdvManAddrOwnerIfId OBJECT-TYPE The integer value is used to identify the interface number (port, trunk or vlan). The management address, automatically advertised from associated 'rlLldpAutoAdvLocPortNum'local port is assigned to mentioned 'rlLldpAutoAdvManAddrOwnerIfId' interface. In case of 0 the management address is automatically calculated without care to the ifIndex it was defined on. | 1.3.6.1.4.1.9.6.1.101.110.1.1.4.1.2 | Integer32 | read-write | current |
| rlLldpAutoAdvManAddrNone OBJECT-TYPE A value of 'true' indicates that the any management address hasn't advertised by the local port. Moreover, the configuration of automatic management address advertisment is disabled. A value of 'false' indicates that the configuration of automatic management address advertisment is enabled. | 1.3.6.1.4.1.9.6.1.101.110.1.1.4.1.3 | TruthValue | read-write | current |
| rlLldpAutoAdvManAddrSubtype OBJECT-TYPE The type of management address identifier encoding used in the associated 'rlLldpAutoAdvManAddr' object. | 1.3.6.1.4.1.9.6.1.101.110.1.1.4.1.4 | AddressFamilyNumbers | read-only | current |
| rlLldpAutoAdvManAddr OBJECT-TYPE The string value used to identify the management address is automaticaly advertised by local port, and assigned on the associated 'rlLldpAutoAdvManAddrOwnerIfId' interface. | 1.3.6.1.4.1.9.6.1.101.110.1.1.4.1.5 | LldpManAddress | read-only | current |
| rlLldpAutoAdvPortsStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.110.1.1.4.1.6 | RowStatus | read-write | current |
| rlLldpChassisIdSubtype OBJECT-TYPE The type of encoding used to identify the chassis associated with the local system. | 1.3.6.1.4.1.9.6.1.101.110.1.1.5 | INTEGER {macAddress(4), local(7)} | read-write | current |
| rlLldpPortConfigTable OBJECT-TYPE LLDP configuration information that controls the transmission of non-standard TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. | 1.3.6.1.4.1.9.6.1.101.110.1.1.6 | not-accessible | current | |
| rlLldpPortConfigEntry OBJECT-TYPE Entry in rlLldpConfigTable. Augment the lldpPortConfigEntry. | 1.3.6.1.4.1.9.6.1.101.110.1.1.6.1 | not-accessible | current | |
| rlLldpPortConfig4wireTxEnable OBJECT-TYPE The rlLldpPortConfigTLVsTxEnable, which is defined as a truth value and configured by the network management, determines whether the 4-wire-poe TLV is allowed on a given LLDP transmission capable port. | 1.3.6.1.4.1.9.6.1.101.110.1.1.6.1.1 | TruthValue | read-write | current |
| rlLldpPortConfigAdvManAddrMode OBJECT-TYPE A value of 'true' indicates that management address TLV does not been advertised by the local port. Moreover, the configuration of automatic management address advertisment is disabled. A value of 'false' indicates that management address being advertised, either by automatic mechanism or by user-defined management address. | 1.3.6.1.4.1.9.6.1.101.110.1.1.6.1.2 | INTEGER {manual(0), none(1), auto(2)} | read-write | current |
| rlLldpPortConfigAutoAdvManAddrOwnerIfId OBJECT-TYPE The integer value is used to identify the interface number (port, trunk or vlan) that the port will advertise its management addresses. Value 0 means that the management address will be taken from the port that advertise. | 1.3.6.1.4.1.9.6.1.101.110.1.1.6.1.3 | Integer32 | read-write | current |
| rlLldpClearGlobalStatistics OBJECT-TYPE An action scalar. Clear LLDP Global statistics counters. The value in the scalar is not relevant. | 1.3.6.1.4.1.9.6.1.101.110.1.1.7 | Integer32 | read-write | current |
| rlLldpClearPortStatistics OBJECT-TYPE A set of ports that are identified by a PortList, in which each port is represented as a bit. Clears the LLDP port staistics information accordingly to the specified PortList. The default value for rlLldpClearPortlStatistics object is an empty binary string, which means no ports are specified to be cleared. This object behaviors as an event (write-only) than reading this object always results in an Empty Port List of length zero. | 1.3.6.1.4.1.9.6.1.101.110.1.1.8 | PortList | read-write | current |
| rlLldpXMedConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1.2 | |||
| rlLldpXMedLocMediaPolicyContainerTable OBJECT-TYPE This table contains one row per policy number of media policy container configuration. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1 | not-accessible | current | |
| rlLldpXMedLocMediaPolicyContainerEntry OBJECT-TYPE Configuration of a particular policy in the media policy container. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1 | not-accessible | current | |
| rlLldpXMedLocMediaPolicyContainerIndex OBJECT-TYPE The index value used to identify the Media Policy associated with this entry. The value of this object is used as a policy number index to the rlLldpXMedLocMediaPolicyContainerTable. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.1 | PolicyNumber | not-accessible | current |
| rlLldpXMedLocMediaPolicyContainerAppType OBJECT-TYPE The media type that defines the primary function of the application for the policy advertised by an endpoint. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.2 | PolicyContainerAppType | read-write | current |
| rlLldpXMedLocMediaPolicyContainerVlanID OBJECT-TYPE An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.3 | Integer32 (0 | 1..4094 | 4095) | read-write | current |
| rlLldpXMedLocMediaPolicyContainerPriority OBJECT-TYPE This object contains the value of the 802.1p priority which is associated with the given port on the local system. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.4 | Integer32 (0..7) | read-write | current |
| rlLldpXMedLocMediaPolicyContainerDscp OBJECT-TYPE This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.5 | Dscp | read-write | current |
| rlLldpXMedLocMediaPolicyContainerUnknown OBJECT-TYPE A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.6 | TruthValue | read-write | current |
| rlLldpXMedLocMediaPolicyContainerTagged OBJECT-TYPE A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.7 | TruthValue | read-write | current |
| rlLldpXMedLocMediaPolicyContainerPorts OBJECT-TYPE A set of ports that are identified by a PortList, in which each port is represented as a bit. The local Media Policy Number will be associated with (or attached to) the ports specified at the rlLldpXMedLocMediaPolicyContainerPorts. The default value for rlLldpXMedLocMediaPolicyContainerPorts object is empty binary string, which means no ports are specified for advertising indicated management address instance. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.8 | PortList | read-write | current |
| rlLldpXMedLocMediaPolicyContainerRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.110.1.2.1.1.9 | RowStatus | read-write | current |
| rlLldpXMedNetPolVoiceUpdateMode OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.2.2 | PolicyAppVoiceUpdateMode | read-write | current |
| rlLldpXMedPortConfigTable OBJECT-TYPE This table contains one row per policy number of media policy container configuration. | 1.3.6.1.4.1.9.6.1.101.110.1.2.3 | not-accessible | current | |
| rlLldpXMedPortConfigEntry OBJECT-TYPE Configuration of a particular policy in the media policy container. | 1.3.6.1.4.1.9.6.1.101.110.1.2.3.1 | not-accessible | current | |
| rlLldpXMedPortConfigTxOperStatus OBJECT-TYPE This field indicates whether this interface is operational transmitted LLDP MED TLVs. To transmit MED TLVs, the interface must be MED enabled and must be connected to an LLDP-MED device. The switch waits for the LLDP-MED device to advertise its information before the switch transmits its own LLDP-MED TLVs, at which point the operational status becomes enabled | 1.3.6.1.4.1.9.6.1.101.110.1.2.3.1.1 | INTEGER {not-relevant(0), enabled(1), disabled(2)} | read-only | current |
| rlLldpTLVsTxOverload OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1.3 | |||
| rlLldpTLVsTxOverloadingTable OBJECT-TYPE A table that show the which of the LLDP TLVs are not transmitted on individual ports due to insufficient room in the frame and the size of each TLV. | 1.3.6.1.4.1.9.6.1.101.110.1.3.1 | not-accessible | current | |
| rlLldpTLVsTxOverloadingEntry OBJECT-TYPE LLDP TX overloading information that shows the transmission of TLVs on LLDP transmission capable ports. | 1.3.6.1.4.1.9.6.1.101.110.1.3.1.1 | not-accessible | current | |
| rlLldpTxOverloadingPortNum OBJECT-TYPE The value of this object is used as a port index to the TLVs TX overloading Table . | 1.3.6.1.4.1.9.6.1.101.110.1.3.1.1.1 | LldpPortNumber | not-accessible | current |
| rlLldpTxOverloadingIndex OBJECT-TYPE The sequence number of the group into sent LLDP PPDU starting from 1. | 1.3.6.1.4.1.9.6.1.101.110.1.3.1.1.2 | Unsigned32 | not-accessible | current |
| rlLldpTxOverloadingGroupId OBJECT-TYPE Defines the TLVs groups. A value of mandatory(1) defines LLDP mandatory TLVs group A value of optinal(2) defines LLDP optional TLVs group A value of medCap(3) defines LLDP MED - Capabilities group A value of medLocation(4) defines LLDP MED - Location group A value of medNetPolicy(5) defines LLDP MED - Network Policy group A value of medPoe(6) defines LLDP MED - Extended Power via MDI group A value of medInventory(7) defines LLDP MED - Inventory group A value of Xdot3(8) defines 802.3 TLVs group A value of Xdot1(9) defines 802.1 TLVs group | 1.3.6.1.4.1.9.6.1.101.110.1.3.1.1.3 | INTEGER {mandatory(1), optional(2), medCap(3), medLocation(4), medNetPolicy(5), medPoe(6), medInventory(7), xDot3(8), xDot1(9), dcbx(10), cisco(11)} | read-only | current |
| rlLldpTLVsTxSize OBJECT-TYPE The size of the TLV in Bytes. | 1.3.6.1.4.1.9.6.1.101.110.1.3.1.1.4 | Unsigned32 | read-only | current |
| rlLldpTLVsTxGroupOverloading OBJECT-TYPE Boolean Flag, When TRUE indicating that LLDP TLVs were overloaded and the value of left size is negative | 1.3.6.1.4.1.9.6.1.101.110.1.3.1.1.5 | TruthValue | read-only | current |
| rlLldpTLVsTxLeftSize OBJECT-TYPE The size in Bytes of the available space left in the LLDPDU after adding the TLVs group. In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for the TLVs group and this is the size of the additional scpace that required for the TLVs group | 1.3.6.1.4.1.9.6.1.101.110.1.3.1.1.6 | Unsigned32 | read-only | current |
| rlLldpTLVsTxOverloadingSizeTable OBJECT-TYPE A table that show the total size of the all TLVs and the LLDPDU free size . | 1.3.6.1.4.1.9.6.1.101.110.1.3.2 | not-accessible | current | |
| rlLldpTLVsTxOverloadingSizeEntry OBJECT-TYPE LLDP TX overloading information | 1.3.6.1.4.1.9.6.1.101.110.1.3.2.1 | not-accessible | current | |
| rlLldpTotalTLVsTxSize OBJECT-TYPE The Total size of all TLVs group in Bytes. | 1.3.6.1.4.1.9.6.1.101.110.1.3.2.1.2 | Unsigned32 | read-only | current |
| rlLldpTLVsTxOverloading OBJECT-TYPE Boolean Flag, When TRUE indicating that LLDP TLVs group were overloaded and the value of left size is negative | 1.3.6.1.4.1.9.6.1.101.110.1.3.2.1.3 | TruthValue | read-only | current |
| rlLldpLeftTLVsTxSize OBJECT-TYPE The size in Bytes of the available space left in the LLDPDU after adding all TLVs group. In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for all the TLVs group and this is the size of the additional scpace that required for all the TLVs group | 1.3.6.1.4.1.9.6.1.101.110.1.3.2.1.4 | Unsigned32 | read-only | current |
| rlLldpTLVsTxOverloadingPorts OBJECT-TYPE Port list that represent the overloading state of each port | 1.3.6.1.4.1.9.6.1.101.110.1.3.3 | PortList | read-only | current |
| rlLldpRemStatus OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1.4 | |||
| rlLldpRemTtlTable OBJECT-TYPE This table contains the remote device Time To Live LLDP TLV. | 1.3.6.1.4.1.9.6.1.101.110.1.4.1 | not-accessible | current | |
| rlLldpRemTtlEntry OBJECT-TYPE LLDP Time To TTL remove TLV. This uses the key as defind in lldpRemTable of the LLDP-MIB. | 1.3.6.1.4.1.9.6.1.101.110.1.4.1.1 | not-accessible | current | |
| rlLldpRemTtl OBJECT-TYPE This object contains the remote device Time To Live LLDP TLV. | 1.3.6.1.4.1.9.6.1.101.110.1.4.1.1.1 | Unsigned32 | read-only | current |
| rlLldpLocalSystemData OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1.5 | |||
| rlLldpLoc4WirePowerTable OBJECT-TYPE This table contains one row per port of power ethernet information | 1.3.6.1.4.1.9.6.1.101.110.1.5.1 | not-accessible | current | |
| rlLldpLoc4WirePowerEntry OBJECT-TYPE Information about a particular port component. | 1.3.6.1.4.1.9.6.1.101.110.1.5.1.1 | not-accessible | current | |
| rlLldpLoc4WirePowerSupported OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.5.1.1.1 | TruthValue | read-only | current |
| rlLldpLoc4WirePowerSpPairDetClasReq OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.5.1.1.2 | TruthValue | read-only | current |
| rlLldpLoc4WirePowerPdSpPairDesStEn OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.5.1.1.3 | TruthValue | read-only | current |
| rlLldpLoc4WirePowerPseSpPairOpStEn OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.5.1.1.4 | TruthValue | read-only | current |
| rlLldpRemoteSystemsData OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1.6 | |||
| rlLldpRem4WirePowerTable OBJECT-TYPE This table contains one row per port of power ethernet information | 1.3.6.1.4.1.9.6.1.101.110.1.6.1 | not-accessible | current | |
| rlLldpRem4WirePowerEntry OBJECT-TYPE Information about a particular port component. | 1.3.6.1.4.1.9.6.1.101.110.1.6.1.1 | not-accessible | current | |
| rlLldpRem4WirePowerSupported OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.6.1.1.1 | TruthValue | read-only | current |
| rlLldpRem4WirePowerSpPairDetClasReq OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.6.1.1.2 | TruthValue | read-only | current |
| rlLldpRem4WirePowerPdSpPairDesStEn OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.6.1.1.3 | TruthValue | read-only | current |
| rlLldpRem4WirePowerPseSpPairOpStEn OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.110.1.6.1.1.4 | TruthValue | read-only | current |
| rlLldpRemTable OBJECT-TYPE The table is AUGMENT for lldpRemTable. Each entry consists Source MAC address. | 1.3.6.1.4.1.9.6.1.101.110.1.6.2 | not-accessible | current | |
| rlLldpRemEntry OBJECT-TYPE Entry that consists source MAC address of the remote station. | 1.3.6.1.4.1.9.6.1.101.110.1.6.2.1 | not-accessible | current | |
| rlLldpRemSrcMacAddr OBJECT-TYPE Source MAC address of the remote station. | 1.3.6.1.4.1.9.6.1.101.110.1.6.2.1.1 | MacAddress | read-only | current |
| rlLldpRemActiveStation OBJECT-TYPE Indicates whether the entry is active (the port is up and LLDP Rx is enabled). | 1.3.6.1.4.1.9.6.1.101.110.1.6.2.1.2 | TruthValue | read-only | current |
| rlLldpV2Config OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.110.1.7 | |||
| rlLldpV2AutoAdvLocPortManAddrTable OBJECT-TYPE This table contains automaticaly selected management address, advertised on the local port. | 1.3.6.1.4.1.9.6.1.101.110.1.7.1 | not-accessible | current | |
| rlLldpV2AutoAdvLocPortManAddrEntry OBJECT-TYPE Information about a local port, which advertises the Management address automatically. Entry also included an interface number, on which the Management address is assigned. Each management address should have distinct 'management address type' (rlLldpAutoAdvManAddrSubtype) and 'management address' (rlLldpAutoAdvManAddr). | 1.3.6.1.4.1.9.6.1.101.110.1.7.1.1 | not-accessible | current | |
| rlLldpV2AutoAdvLocPortNum OBJECT-TYPE The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the rlLldpAutoAdvLocPortManAddrTable. | 1.3.6.1.4.1.9.6.1.101.110.1.7.1.1.1 | LldpPortNumber | not-accessible | current |
| rlLldpV2AutoAdvManAddrType OBJECT-TYPE The type of management address identifier encoding used in the associated 'rlLldpAutoAdvManAddr' object. | 1.3.6.1.4.1.9.6.1.101.110.1.7.1.1.2 | InetAddressType | not-accessible | current |
| rlLldpV2AutoAdvManAddr OBJECT-TYPE The string value used to identify the management address is automatically advertised by local port, and assigned on the associated 'rlLldpAutoAdvManAddrOwnerIfId' interface. | 1.3.6.1.4.1.9.6.1.101.110.1.7.1.1.3 | InetAddress | not-accessible | current |
| rlLldpV2AutoAdvManAddrOwnerIfId OBJECT-TYPE The integer value is used to identify the interface number (port, trunk or vlan). The management address, automatically advertised from associated 'rlLldpAutoAdvLocPortNum' local port is assigned to mentioned 'rlLldpAutoAdvManAddrOwnerIfId' interface. | 1.3.6.1.4.1.9.6.1.101.110.1.7.1.1.4 | Integer32 | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| rlLldpTLVsTxOverloadingStateEnterTrap NOTIFICATION-TYPE Informational trap indicating that the port has entered the overloading state. | 1.3.6.1.4.1.9.6.1.101.0.209 | current |
| rlLldpTLVsTxOverloadingStateExitTrap NOTIFICATION-TYPE Informational trap indicating that the port is no longer in the overloading state.. | 1.3.6.1.4.1.9.6.1.101.0.210 | current |