MIBs Depot

JNX-OPT-IF-EXT-MIB

Registered at
1.3.6.1.4.1.2636.3.73.1.3
Last updated
2012-04-25 00:00
Organization
IETF Ops/Camp MIB Working Group
Revisions
2012-04-25 00:00, 2013-01-25 00:00, 2013-02-27 00:00, 2013-11-01 00:00
Namespace
juniper
Source file
JNX-OPT-IF-EXT-MIB
Digest
sha256:e78129156c5dfb9d4ccf7f4e0a18ac203a159524bed8165199a3eb35609f3e59

Description

The MIB module to describe Black Link extension to rfc3591. It is the enterprise version of the draft draft-galikunze-ccamp-g-698-2-snmp-mib-02

Contact

Email: Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net

Imports

FromSymbols
IF-MIBifIndex
JNX-OPT-IF-MIBJnxoptIfDirectionality, jnxoptIfMibModule, jnxoptIfOChConfigEntry, jnxoptIfOChSinkCurrentEntry
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, transmission
SNMPv2-TCDateAndTime, DisplayString, RowPointer, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
JNX-OPT-IF-EXT-MIB
JNX-OPT-IF-MIB
JUNIPER-SMI
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JnxoptIfBitRateLineCoding
TEXTUAL-CONVENTION
Optical tributary signal class 1 - NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s) 2 - NRZ 10G nominally 2.4 Gbit/s to nominally 10.71 Gbit/s. 3 - 40 Gbits/s 4 - 100 Gbits/s 5 - 400 Gbits/s 6 - 150 Gbits/s 7 - 200 Gbits/s 40 Gbits/s and above are under study.
current
JnxoptIfChannelSpacing
TEXTUAL-CONVENTION
Channel spacing 1 - 100 GHz 2 - 50 GHz 3 - 25 GHz 4 - 12.5 GHz 5 - 6.25 GHz 6 - 37.5 GHz
current
JnxoptIfFiberTypeCategory
TEXTUAL-CONVENTION
Fiber Types - ITU-T Recs G.652, G.653, G.654 and G.655 G.652 A, B, C, D G.653 A, B G.654 A, B, C G.655 C, D, E G.656 G.657 A, B Categories - A, B, C, D and E
current
JnxoptIfFiberTypeRecommendation
TEXTUAL-CONVENTION
Fiber Types - ITU-T Recs G.652, G.653, G.654 and G.655 One for recommendation and one for category. G.652 A, B, C, D G.653 A, B G.654 A, B, C G.655 C, D, E G.656 G.657 A, B
current
JnxoptIfOTNAlarmSeverity
TEXTUAL-CONVENTION
Severity of the Notification
current
JnxoptIfOTNDirection
TEXTUAL-CONVENTION
Indicates the direction as Rx/Tx or bi-directional.
current
JnxoptIfOTNLayer
TEXTUAL-CONVENTION
This parameter indicates the parameters for the table are for OTUk, ODUk, TCM performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk layer and TCM sublayer PM is not related to the black link PM management, but since this could be a common PM model for the ODUk layer and TCM layers, we include it here so it may be used for simple scenarios where only lower order ODUk or higher order ODUk is present. For scenarios where both lower order ODUk and higher order ODUk are present, further extension to the MIB model is required, in particular for the indexing for these layers.
current
JnxoptIfOTNOChAlarms
TEXTUAL-CONVENTION
This is the possible alarms from the OCh and OTUk layer.
current
JnxoptIfOTNODUkTcmAlarms
TEXTUAL-CONVENTION
This is the alarms from the ODUk and TCM layer.
current
JnxoptIfOTNType
TEXTUAL-CONVENTION
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
current

Objects

NameOIDSyntaxAccessStatus
jnxoptIfOTNNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.73.1.3.0
jnxoptIfOPSmEntry
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.73.1.3.1
jnxoptIfOPSmConfigTable
OBJECT-TYPE
A table of OPS General config parameters.
1.3.6.1.4.1.2636.3.73.1.3.1.1not-accessiblecurrent
jnxoptIfOPSmConfigEntry
OBJECT-TYPE
An conceptual row of OPS General config parameters.
1.3.6.1.4.1.2636.3.73.1.3.1.1.1not-accessiblecurrent
jnxoptIfOPSmDirectionality
OBJECT-TYPE
Indicates the directionality of the entity.
1.3.6.1.4.1.2636.3.73.1.3.1.1.1.1JnxoptIfDirectionalityread-onlycurrent
jnxoptIfOPSmFiberTypeRecommendation
OBJECT-TYPE
Fiber type as per fibre types are chosen from those defined in ITU-T Recs G.652, G.653, G.654, G.655, G.656 and G.657.
1.3.6.1.4.1.2636.3.73.1.3.1.1.1.2JnxoptIfFiberTypeRecommendationread-onlycurrent
jnxoptIfOPSmFiberTypeCategory
OBJECT-TYPE
Fiber type as per fibre types are chosen from those defined in ITU-T Recs G.652, G.653, and G.655. The categories are A, B, C, D and E.
1.3.6.1.4.1.2636.3.73.1.3.1.1.1.3JnxoptIfFiberTypeCategoryread-onlycurrent
jnxoptIfOChSrcSinkGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.73.1.3.2
jnxoptIfOChConfigExtTable
OBJECT-TYPE
A table of Och General config extension parameters
1.3.6.1.4.1.2636.3.73.1.3.2.1not-accessiblecurrent
jnxoptIfOChConfigExtEntry
OBJECT-TYPE
A conceptual row that contains OCh configuration extension information of an interface.
1.3.6.1.4.1.2636.3.73.1.3.2.1.1not-accessiblecurrent
jnxoptIfOChMiminumChannelSpacing
OBJECT-TYPE
A minimum nominal difference in frequency (GHz) between two adjacent channels.
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.1JnxoptIfChannelSpacingread-onlycurrent
jnxoptIfOChBitRateLineCoding
OBJECT-TYPE
Optical tributary signal class NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s) NRZ 10G (nominally 2.4 Gbit/s to nominally 10.71 Gbit/s)
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.2JnxoptIfBitRateLineCodingread-onlycurrent
jnxoptIfOChFEC
OBJECT-TYPE
This parameter indicates what Forward Error Correction (FEC) code is used at Source and Sink. GFEC (from G709) and the I.x EFEC's (G.975 - Table I.1 super FEC). 1 - No FEC 2 - GFEC 3 - I.2 EFEC 4 - I.3 EFEC 5 - I.4 EFEC 6 - I.5 EFEC 7 - I.6 EFEC 8 - I.7 EFEC 9 - I.8 EFEC 10 - I.9 EFEC 11 - 100G FEC (for new applications) 12 - 100G EFEC (for new applications) 99 - Vendor Specific
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.3Unsigned32read-writecurrent
jnxoptIfOChSinkMaximumBERMantissa
OBJECT-TYPE
This parameter indicate the maximum Bit(mantissa) error rate can be supported by the application at the Receiver. In case of FEC applications it is intended after the FEC correction.
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4Unsigned32read-onlycurrent
jnxoptIfOChSinkMaximumBERExponent
OBJECT-TYPE
This parameter indicate the maximum Bit(exponent) error rate can be supported by the application at the Receiver. In case of FEC applications it is intended after the FEC correction.
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.5Unsigned32read-onlycurrent
jnxoptIfOChMinWavelength
OBJECT-TYPE
This parameter indicate minimum wavelength spectrum in a definite wavelength Band (L, C and S)
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.6Unsigned32read-onlycurrent
jnxoptIfOChMaxWavelength
OBJECT-TYPE
This parameter indicate maximum wavelength spectrum in a definite wavelength Band (L, C and S)
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.7Unsigned32read-onlycurrent
jnxoptIfOChWavelength
OBJECT-TYPE
This parameter indicates the wavelength value.
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.8Unsigned32read-writecurrent
jnxoptIfOChVendorTransceiverClass
OBJECT-TYPE
As defined in G.698 Vendors can summarize a set of parameters in a single proprietary parameter: the Class of transceiver. The Transceiver classification will be based on the Vendor Name and the main TX and RX parameters (i.e. Trunk Mode, Framing, Bit rate, Trunk Type etc). If this parameter is used, the MIB parameters specifying the Transceiver characteristics may not be significant and the vendor will be responsible to specify the Class contents and values. The Vendor can publish the parameters of its Classes or declare to be compatible with published Classes.(G) Optional for compliance. (not mentioned in G.698)
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.9DisplayString (SIZE(1..64))read-onlycurrent
jnxoptIfOChOpticalInterfaceApplicationCode
OBJECT-TYPE
This parameter indicates the transceiver application code at Ss and Rs as defined in [ITU.G698.2] Chapter 5.3
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.10DisplayString (SIZE(1..64))read-onlycurrent
jnxoptIfOChLaserAdminState
OBJECT-TYPE
The configured State of the laser: 0 - disabled 1 - enabled
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.11INTEGER {disabled(0), enabled(1)}read-writecurrent
jnxoptIfOChLaserOperationalState
OBJECT-TYPE
The Operational Status of Laser: 0 - disabled 1 - Enabled 2 - fault 3 - degraded
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.12INTEGER {disabled(0), enabled(1), fault(2), degraded(3)}read-onlycurrent
jnxoptIfOChAdminState
OBJECT-TYPE
The Administrative Status of an Interface: 0 - Out of Service 1 - In Service
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.13INTEGER {disable(0), enable(1)}read-writecurrent
jnxoptIfOChOperationalState
OBJECT-TYPE
The Operational Status of an Interface: 0 - disabled 1 - enabled 2 - Fault 3 - Degraded
1.3.6.1.4.1.2636.3.73.1.3.2.1.1.14INTEGER {disabled(0), enabled(1), fault(2), degraded(3)}read-onlycurrent
jnxoptIfOChSrcConfigTable
OBJECT-TYPE
A configuration table of OCh Src (Ss) parameters.
1.3.6.1.4.1.2636.3.73.1.3.2.2not-accessiblecurrent
jnxoptIfOChSrcConfigEntry
OBJECT-TYPE
A conceptual row that contains the Src (Ss) configuration parameters for a given interface.
1.3.6.1.4.1.2636.3.73.1.3.2.2.1not-accessiblecurrent
jnxoptIfOChMinimumMeanChannelOutputPower
OBJECT-TYPE
The minimum mean launched power at Ss is the average power (in dbm) of a pseudo-random data sequence coupled into the DWDM link.
1.3.6.1.4.1.2636.3.73.1.3.2.2.1.1Integer32read-onlycurrent
jnxoptIfOChMaximumMeanChannelOutputPower
OBJECT-TYPE
The maximum mean launched power at Ss is the average power (in dbm) of a pseudo-random data sequence coupled into the DWDM link.
1.3.6.1.4.1.2636.3.73.1.3.2.2.1.2Integer32read-onlycurrent
jnxoptIfOChMinimumCentralFrequency
OBJECT-TYPE
The minimum central frequency is the nominal single-channel frequency (in THz) on which the digital coded information of the particular optical channel is modulated by use of the NRZ line code. Eg 191.5THz will be represented as 19150
1.3.6.1.4.1.2636.3.73.1.3.2.2.1.3Unsigned32read-onlycurrent
jnxoptIfOChMaximumCentralFrequency
OBJECT-TYPE
The maximum central frequency is the nominal single-channel frequency (in THz) on which the digital coded information of the particular optical channel is modulated by use of the NRZ line code. Eg 191.5THz will be represented as 19150
1.3.6.1.4.1.2636.3.73.1.3.2.2.1.4Unsigned32read-onlycurrent
jnxoptIfOChMaximumSpectralExcursion
OBJECT-TYPE
This is the maximum acceptable difference between the nominal central frequency (in GHz) of the channel and the minus 15 dB points of the transmitter spectrum furthest from the nominal central frequency measured at point Ss.
1.3.6.1.4.1.2636.3.73.1.3.2.2.1.5Unsigned32read-onlycurrent
jnxoptIfOChMaximumTxDispersionOSNRPenalty
OBJECT-TYPE
Defines a reference receiver that this penalty is measured with. Lowest OSNR at Ss with worst case (residual) dispersion minus the Lowest OSNR at Ss with no dispersion. Lowest OSNR at Ss with no dispersion
1.3.6.1.4.1.2636.3.73.1.3.2.2.1.6Integer32read-onlycurrent
jnxoptIfOChSrcSinkConfigTable
OBJECT-TYPE
A table of paramters for the optical path from Src to Sink (Ss to Rs).
1.3.6.1.4.1.2636.3.73.1.3.2.3not-accessiblecurrent
jnxoptIfOChSrcSinkConfigEntry
OBJECT-TYPE
A conceptual row that contains the optical path Src-Sink (Ss-Rs) configuration parameters for a given interface.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1not-accessiblecurrent
jnxoptIfOChSrcSinkMinimumChromaticDispersion
OBJECT-TYPE
These parameters define the minimum value of the optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.1Integer32read-onlycurrent
jnxoptIfOChSrcSinkMaximumChromaticDispersion
OBJECT-TYPE
These parameters define the maximum value of the optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.2Integer32read-onlycurrent
jnxoptIfOChSrcSinkMinimumSrcOpticalReturnLoss
OBJECT-TYPE
These parameter defines minimum optical return loss (in dB) of the cable plant at the source reference point (Src/Ss), including any connectors.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.3Integer32read-onlycurrent
jnxoptIfOChSrcSinkMaximumDiscreteReflectanceSrcToSink
OBJECT-TYPE
Optical reflectance is defined to be the ratio of the reflected optical power pre.sent at a point, to the optical power incident to that point. Control of reflections is discussed extensively in ITU-T Rec. G.957.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.4Integer32read-onlycurrent
jnxoptIfOChSrcSinkMaximumDifferentialGroupDelay
OBJECT-TYPE
Differential group delay (DGD) is the time difference between the fractions of a pulse that are transmitted in the two principal states of polarization of an optical signal. For distances greater than several kilometres, and assuming random (strong) polarization mode coupling, DGD in a fibre can be statistically modelled as having a Maxwellian distribution.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.5Integer32read-onlycurrent
jnxoptIfOChSrcSinkMaximumPolarisationDependentLoss
OBJECT-TYPE
The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of polarization (SOP) over all SOPs.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.6Integer32read-onlycurrent
jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk
OBJECT-TYPE
Inter-channel crosstalk is defined as the ratio of total power in all of the disturbing channels to that in the wanted channel, where the wanted and disturbing channels are at different wavelengths. The parameter specify the isolation of a link conforming to the 'black-link' approach such that under the worst- case operating conditions the inter-channel crosstalk at any reference point RS is less than the maximum inter-channel crosstalk value.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7Integer32read-onlycurrent
jnxoptIfOChSrcSinkInterFerometricCrosstalk
OBJECT-TYPE
This parameter places a requirement on the isolation of a link conforming to the 'black-link' approach such that under the worst case operating conditions the interferometric crosstalk at any reference point RS is less than the maximum interferometric crosstalk value..
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.8Integer32read-onlycurrent
jnxoptIfOChSrcSinkOpticalPathOSNRPenalty
OBJECT-TYPE
The optical path OSNR penalty is defined as the difference between the Lowest OSNR at Rs and Lowest OSNR at Ss that meets the BER requirement.
1.3.6.1.4.1.2636.3.73.1.3.2.3.1.9Integer32read-onlycurrent
jnxoptIfOChSinkConfigTable
OBJECT-TYPE
A table of OCh Sink (Rs) configuration parameters.
1.3.6.1.4.1.2636.3.73.1.3.2.4not-accessiblecurrent
jnxoptIfOChSinkConfigEntry
OBJECT-TYPE
A conceptual row that contains the Sink (Rs) configuration parameters for a given interface.
1.3.6.1.4.1.2636.3.73.1.3.2.4.1not-accessiblecurrent
jnxoptIfOChSinkMinimumMeanIntputPower
OBJECT-TYPE
The minimum values of the average received power (in dbm at point the Sink (Rs).
1.3.6.1.4.1.2636.3.73.1.3.2.4.1.1Integer32read-onlycurrent
jnxoptIfOChSinkMaximumMeanIntputPower
OBJECT-TYPE
The maximum values of the average received power (in dbm) at point the Sink (Rs).
1.3.6.1.4.1.2636.3.73.1.3.2.4.1.2Integer32read-onlycurrent
jnxoptIfOChSinkMinimumOSNR
OBJECT-TYPE
The minimum optical signal-to-noise ratio (OSNR) is the minimum value of the ratio of the signal power in the wanted channel to the highest noise power density in the range of the central frequency plus and minus the maximum spectral excursion.
1.3.6.1.4.1.2636.3.73.1.3.2.4.1.3Integer32read-onlycurrent
jnxoptIfOChSinkOSNRTolerance
OBJECT-TYPE
The receiver OSNR tolerance is defined as the minimum value of OSNR at point Sink (Rs) that can be tolerated while maintaining the maximum BER of the application. Sink (Rs).
1.3.6.1.4.1.2636.3.73.1.3.2.4.1.4Integer32read-onlycurrent
jnxoptIfOTNPMGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.73.1.3.3
jnxoptIfOChSinkCurrentExtTable
OBJECT-TYPE
A table of OCh sink etxension to the performance monitoring information for the current 15-minute interval.
1.3.6.1.4.1.2636.3.73.1.3.3.1not-accessiblecurrent
jnxoptIfOChSinkCurrentExtEntry
OBJECT-TYPE
A conceptual row that contains OCh sink performance monitoring information for an interface for the current 15-minute interval.
1.3.6.1.4.1.2636.3.73.1.3.3.1.1not-accessiblecurrent
jnxoptIfOChSinkCurrentChromaticDispersion
OBJECT-TYPE
Residual Chromatic Dispersion measured at Rx Transceiver port.
1.3.6.1.4.1.2636.3.73.1.3.3.1.1.1Integer32read-onlycurrent
jnxoptIfOChSinkCurrentOSNR
OBJECT-TYPE
Current Optical Signal to Noise Ratio (OSNR) estimated at Rx Transceiver port .
1.3.6.1.4.1.2636.3.73.1.3.3.1.1.2Integer32read-onlycurrent
jnxoptIfOChSinkCurrentQ
OBJECT-TYPE
'Q' factor estimated at Rx Transceiver port.
1.3.6.1.4.1.2636.3.73.1.3.3.1.1.3Integer32read-onlycurrent
jnxoptIfOTNPMConfigTable
OBJECT-TYPE
A table of performance monitoring configuration for the type 'jnxoptIfOTNPMConfigLayer' layer.
1.3.6.1.4.1.2636.3.73.1.3.3.2not-accessiblecurrent
jnxoptIfOTNPMConfigEntry
OBJECT-TYPE
A conceptual entry in the performance monitoring configuration for the type 'jnxoptIfOTNPMConfigLayer' layer.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1not-accessiblecurrent
jnxoptIfOTNPMConfigType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMConfigLayer
OBJECT-TYPE
This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a common PM model for the ODU/TCM layer, we may include it here.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.2JnxoptIfOTNLayernot-accessiblecurrent
jnxoptIfOTNPMConfigTCMLevel
OBJECT-TYPE
This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.3Unsigned32 (0..6)not-accessiblecurrent
jnxoptIfOTNPMESRInterval
OBJECT-TYPE
This parameter indicates the measurement interval for error seconds ratio.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.4Unsigned32 (1..96)read-writecurrent
jnxoptIfOTNPMSESRInterval
OBJECT-TYPE
This parameter indicates the measurement interval for severely error seconds ratio.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.5Unsigned32read-writecurrent
jnxoptIfOTNPMValidIntervals
OBJECT-TYPE
The number of contiguous 15 minute intervals for which valid PM data is available for the particular interface.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPM15MinBip8Threshold
OBJECT-TYPE
The number of Bip8 encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.7Unsigned32read-writecurrent
jnxoptIfOTNPM15MinESsThreshold
OBJECT-TYPE
The number of ES encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshEsTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.8Unsigned32read-writecurrent
jnxoptIfOTNPM15MinSESsThreshold
OBJECT-TYPE
The number of SES encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshSESTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.9Unsigned32read-writecurrent
jnxoptIfOTNPM15MinUASsThreshold
OBJECT-TYPE
The number of UAS encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshUASTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.10Unsigned32read-writecurrent
jnxoptIfOTNPM15MinBBEsThreshold
OBJECT-TYPE
The number of UAS encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBBETCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.11Unsigned32read-writecurrent
jnxoptIfOTNPM24HourBip8Threshold
OBJECT-TYPE
The number of Bip8 encountered by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.12Unsigned32read-writecurrent
jnxoptIfOTNPM24HourESsThreshold
OBJECT-TYPE
The number of ES encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshEsTCA. One notification will be sent per 24 hour per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.13Unsigned32read-writecurrent
jnxoptIfOTNPM24HourSESsThreshold
OBJECT-TYPE
The number of SES encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshSESsTCA. One notification will be sent per 24 hour per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.14Unsigned32read-writecurrent
jnxoptIfOTNPM24HourUASsThreshold
OBJECT-TYPE
The number of SES encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshUASsTCA. One notification will be sent per 24 hour per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.15Unsigned32read-writecurrent
jnxoptIfOTNPM24HourBBEsThreshold
OBJECT-TYPE
The number of BBE encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshBBEsTCA. One notification will be sent per 24 hour per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.16Unsigned32read-writecurrent
jnxoptIfOTNPMBip8EnableTCA
OBJECT-TYPE
Enable TCA's - 15minute and 24hr for Bip8
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.17TruthValueread-writecurrent
jnxoptIfOTNPMESsEnableTCA
OBJECT-TYPE
Enable TCA's - 15minute and 24hr for ESs
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.18TruthValueread-writecurrent
jnxoptIfOTNPMSESsEnableTCA
OBJECT-TYPE
Enable TCA's - 15minute and 24hr for SESs
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.19TruthValueread-writecurrent
jnxoptIfOTNPMUASsEnableTCA
OBJECT-TYPE
Enable TCA's - 15minute and 24hr for UASs
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.20TruthValueread-writecurrent
jnxoptIfOTNPMBBEsEnableTCA
OBJECT-TYPE
Enable TCA's - 15minute and 24hr for BBEs
1.3.6.1.4.1.2636.3.73.1.3.3.2.1.21TruthValueread-writecurrent
jnxoptIfOTNPMCurrentTable
OBJECT-TYPE
A table for the Performance monitoring Current Table.
1.3.6.1.4.1.2636.3.73.1.3.3.3not-accessiblecurrent
jnxoptIfOTNPMCurrentEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1not-accessiblecurrent
jnxoptIfOTNPMCurrentType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMCurrentLayer
OBJECT-TYPE
This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk (OCh which is used for the black link) 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a common PM model for the ODU/TCM layer, we may include it here.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.2JnxoptIfOTNLayernot-accessiblecurrent
jnxoptIfOTNPMCurrentTCMLevel
OBJECT-TYPE
This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.3Unsigned32 (0..6)not-accessiblecurrent
jnxoptIfOTNPMCurrentSuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.4TruthValueread-onlycurrent
jnxoptIfOTNPMCurrentBip8
OBJECT-TYPE
Number of Failures occurred in an observation period.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.5Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentESs
OBJECT-TYPE
This is the number of seconds in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentSESs
OBJECT-TYPE
The number of seconds which have a severe error. This is the number of seconds in which the bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentUASs
OBJECT-TYPE
It is the number of unavailable seconds. A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new period of available time begins at the onset of ten consecutive non-SES events. These ten seconds are considered to be part of available time.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentBBEs
OBJECT-TYPE
An errored block not occurring as part of an SES.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentESR
OBJECT-TYPE
The ratio of ES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentSESR
OBJECT-TYPE
The ratio of SES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.11Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentBBER
OBJECT-TYPE
The ratio of BER in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.12Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentElapsedTime
OBJECT-TYPE
Time elapsed for this 15 minute interval
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.13Unsigned32read-onlycurrent
jnxoptIfOTNPMCurSuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
1.3.6.1.4.1.2636.3.73.1.3.3.3.1.14Integer32read-onlycurrent
jnxoptIfOTNPMIntervalTable
OBJECT-TYPE
A Performance monitoring Interval Table.
1.3.6.1.4.1.2636.3.73.1.3.3.4not-accessiblecurrent
jnxoptIfOTNPMIntervalEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1not-accessiblecurrent
jnxoptIfOTNPMIntervalType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMIntervalLayer
OBJECT-TYPE
This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a common PM model for the ODU/TCM layer, we may include it here.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.2JnxoptIfOTNLayernot-accessiblecurrent
jnxoptIfOTNPMIntervalTCMLevel
OBJECT-TYPE
This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.3Unsigned32 (0..6)not-accessiblecurrent
jnxoptIfOTNPMIntervalNumber
OBJECT-TYPE
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4Unsigned32 (1..96)not-accessiblecurrent
jnxoptIfOTNPMIntervalSuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.5TruthValueread-onlycurrent
jnxoptIfOTNPMIntervalBip8
OBJECT-TYPE
Number of Failures occurred in an observation period.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalESs
OBJECT-TYPE
It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalSESs
OBJECT-TYPE
The number of seconds which have a severe error. It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalUASs
OBJECT-TYPE
It is the number of unavailable seconds in this 15 minute interval. A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new period of available time begins at the onset of ten consecutive non-SES events. These ten seconds are considered to be part of available time.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalBBEs
OBJECT-TYPE
An errored block not occurring as part of an SES.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalESR
OBJECT-TYPE
The ratio of ES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.11Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalSESR
OBJECT-TYPE
The ratio of SES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.12Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalBBER
OBJECT-TYPE
The ratio of BBE in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.13Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalTimeStamp
OBJECT-TYPE
Time stamp of this interval.
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.14DateAndTimeread-onlycurrent
jnxoptIfOTNPMIntSuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
1.3.6.1.4.1.2636.3.73.1.3.3.4.1.15Integer32read-onlycurrent
jnxoptIfOTNPMCurrentDayTable
OBJECT-TYPE
A Performance monitoring Current Day Table.
1.3.6.1.4.1.2636.3.73.1.3.3.5not-accessiblecurrent
jnxoptIfOTNPMCurrentDayEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring Current day table for the type 'jnxoptIfOTNPMCurrentDayLayer' layer.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1not-accessiblecurrent
jnxoptIfOTNPMCurrentDayType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMCurrentDayLayer
OBJECT-TYPE
This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a common PM model for the ODU/TCM layer, we may include it here.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.2JnxoptIfOTNLayernot-accessiblecurrent
jnxoptIfOTNPMCurrentDayTCMLevel
OBJECT-TYPE
This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.3Unsigned32 (0..6)not-accessiblecurrent
jnxoptIfOTNPMCurrentDaySuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.4TruthValueread-onlycurrent
jnxoptIfOTNPMCurrentDayBip8
OBJECT-TYPE
Number of Failures occurred in an observation period.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.5Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayESs
OBJECT-TYPE
The number of seconds which have an error. It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDaySESs
OBJECT-TYPE
The number of seconds which have a severe error. It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayUASs
OBJECT-TYPE
It is the number of unavailable seconds in the cunrrent day. A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new period of available time begins at the onset of ten consecutive non-SES events. These ten seconds are considered to be part of available time.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayBBEs
OBJECT-TYPE
An errored block not occurring as part of an SES.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayESR
OBJECT-TYPE
The ratio of ES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDaySESR
OBJECT-TYPE
The ratio of SES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.11Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayBBER
OBJECT-TYPE
The ratio of BBE in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.12Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayElapsedTime
OBJECT-TYPE
Time elapsed for current day
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.13Unsigned32read-onlycurrent
jnxoptIfOTNPMCurDaySuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more intervals are invaild
1.3.6.1.4.1.2636.3.73.1.3.3.5.1.14Integer32read-onlycurrent
jnxoptIfOTNPMPrevDayTable
OBJECT-TYPE
A Performance monitoring Previous Day Table.
1.3.6.1.4.1.2636.3.73.1.3.3.6not-accessiblecurrent
jnxoptIfOTNPMPrevDayEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring previous day table for the type 'jnxoptIfOTNPMPrevDayLayer' layer.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1not-accessiblecurrent
jnxoptIfOTNPMPrevDayType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMPrevDayLayer
OBJECT-TYPE
This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a common PM model for the ODU/TCM layer, we may include it here.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.2JnxoptIfOTNLayernot-accessiblecurrent
jnxoptIfOTNPMPrevDayTCMLevel
OBJECT-TYPE
This parameter indicates the TCM level (1-6) if the PM is of the type TCM.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.3Unsigned32 (0..6)not-accessiblecurrent
jnxoptIfOTNPMPrevDaySuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.4TruthValueread-onlycurrent
jnxoptIfOTNPMPrevDayBip8
OBJECT-TYPE
Number of pre FEC failures occurred in an observation period.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.5Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayESs
OBJECT-TYPE
The number of seconds which have an error. It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDaySESs
OBJECT-TYPE
The number of seconds which have a severe error. A severely errored second, is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayUASs
OBJECT-TYPE
It is the number of unavailable seconds in the previous day. A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new period of available time begins at the onset of ten consecutive non-SES events. These ten seconds are considered to be part of available time.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayBBEs
OBJECT-TYPE
An errored block not occurring as part of an SES.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayESR
OBJECT-TYPE
The ratio of ES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDaySESR
OBJECT-TYPE
The ratio of SES in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.11Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayBBER
OBJECT-TYPE
The ratio of BBE in available time to total seconds in available time during a fixed measurement interval.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.12Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayTimeStamp
OBJECT-TYPE
Time stamp of this interval.
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.13DateAndTimeread-onlycurrent
jnxoptIfOTNPMPrevDaySuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild
1.3.6.1.4.1.2636.3.73.1.3.3.6.1.14Integer32read-onlycurrent
jnxoptIfOTNPMFECConfigTable
OBJECT-TYPE
A table of performance monitoring FEC configuration.
1.3.6.1.4.1.2636.3.73.1.3.3.7not-accessiblecurrent
jnxoptIfOTNPMFECConfigEntry
OBJECT-TYPE
A conceptual entry in the performance monitoring FEC configuration layer.
1.3.6.1.4.1.2636.3.73.1.3.3.7.1not-accessiblecurrent
jnxoptIfOTNPMFECConfigType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.7.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMFECValidIntervals
OBJECT-TYPE
The number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface.
1.3.6.1.4.1.2636.3.73.1.3.3.7.1.2Unsigned32read-onlycurrent
jnxoptIfOTNPM15MinPreFECBERMantissaThreshold
OBJECT-TYPE
BER (mantissa) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.7.1.3Unsigned32read-writecurrent
jnxoptIfOTNPM15MinPreFECBERExponentThreshold
OBJECT-TYPE
The Pre FEC BER (exponent) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.7.1.4Unsigned32read-writecurrent
jnxoptIfOTNPM24HourPreFECBERMantissaThreshold
OBJECT-TYPE
BER (mantissa) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.7.1.5Unsigned32read-writecurrent
jnxoptIfOTNPM24HourPreFECBERExponentThreshold
OBJECT-TYPE
The Pre FEC BER (exponent) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period per interface. A value of `0' will disable the notification.
1.3.6.1.4.1.2636.3.73.1.3.3.7.1.6Unsigned32read-writecurrent
jnxoptIfOTNPMFECBEREnableTCA
OBJECT-TYPE
Enable TCA's - 15minute and 24hr for FEC BER
1.3.6.1.4.1.2636.3.73.1.3.3.7.1.7TruthValueread-writecurrent
jnxoptIfOTNPMFECCurrentTable
OBJECT-TYPE
A Performance monitoring FEC Current Table.
1.3.6.1.4.1.2636.3.73.1.3.3.8not-accessiblecurrent
jnxoptIfOTNPMFECCurrentEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring FEC current table.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1not-accessiblecurrent
jnxoptIfOTNPMFECCurrentType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMFECCurrentSuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.2TruthValueread-onlycurrent
jnxoptIfOTNPMCurrentFECCorrectedErr
OBJECT-TYPE
The number of bits corrected by the FEC are counted in the interval.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.3Counter64read-onlycurrent
jnxoptIfOTNPMCurrentFECUncorrectedWords
OBJECT-TYPE
The number of un-corrected words by the FEC are counted over the interval.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.4Counter64read-onlycurrent
jnxoptIfOTNPMCurrentFECBERMantissa
OBJECT-TYPE
The number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.5Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECBERExponent
OBJECT-TYPE
The number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECMinBERMantissa
OBJECT-TYPE
The minimum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECMinBERExponent
OBJECT-TYPE
The minimum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECMaxBERMantissa
OBJECT-TYPE
The maximum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECMaxBERExponent
OBJECT-TYPE
The maximum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECAvgBERMantissa
OBJECT-TYPE
The average number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.11Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECAvgBERExponent
OBJECT-TYPE
The average number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.12Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentFECElapsedTime
OBJECT-TYPE
Time elapsed for this 15 minute interval.
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.13Unsigned32read-onlycurrent
jnxoptIfOTNPMFECCurSuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
1.3.6.1.4.1.2636.3.73.1.3.3.8.1.14Integer32read-onlycurrent
jnxoptIfOTNPMFECIntervalTable
OBJECT-TYPE
A Performance monitoring FEC Interval Table.
1.3.6.1.4.1.2636.3.73.1.3.3.9not-accessiblecurrent
jnxoptIfOTNPMFECIntervalEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring FEC interval table.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1not-accessiblecurrent
jnxoptIfOTNPMFECIntervalType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMFECIntervalNumber
OBJECT-TYPE
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.2Unsigned32not-accessiblecurrent
jnxoptIfOTNPMFECIntervalSuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.3TruthValueread-onlycurrent
jnxoptIfOTNPMIntervalFECCorrectedErr
OBJECT-TYPE
The number of bits corrected by the FEC are counted in the interval.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.4Counter64read-onlycurrent
jnxoptIfOTNPMIntervalFECUncorrectedWords
OBJECT-TYPE
The number of words un-corrected words by the FEC are counted over the interval.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.5Counter64read-onlycurrent
jnxoptIfOTNPMIntervalMinFECBERMantissa
OBJECT-TYPE
The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum Pre FEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalMinFECBERExponent
OBJECT-TYPE
The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum Pre FEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalMaxFECBERMantissa
OBJECT-TYPE
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalMaxFECBERExponent
OBJECT-TYPE
The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalAvgFECBERMantissa
OBJECT-TYPE
The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMIntervalAvgFECBERExponent
OBJECT-TYPE
The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average Pre FEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.11Unsigned32read-onlycurrent
jnxoptIfOTNPMFECIntervalTimeStamp
OBJECT-TYPE
Time stamp of this interval.
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.12DateAndTimeread-onlycurrent
jnxoptIfOTNPMFECIntSuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
1.3.6.1.4.1.2636.3.73.1.3.3.9.1.13Integer32read-onlycurrent
jnxoptIfOTNPMFECCurrentDayTable
OBJECT-TYPE
A Performance monitoring FEC current day table.
1.3.6.1.4.1.2636.3.73.1.3.3.10not-accessiblecurrent
jnxoptIfOTNPMFECCurrentDayEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring FEC current day table.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1not-accessiblecurrent
jnxoptIfOTNPMFECCurrentDayType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMFECCurrentDaySuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.2TruthValueread-onlycurrent
jnxoptIfOTNPMCurrentDayFECCorrectedErr
OBJECT-TYPE
The number of bits corrected by the FEC are counted in the interval.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.3Counter64read-onlycurrent
jnxoptIfOTNPMCurrentDayFECUncorrectedWords
OBJECT-TYPE
The number of words un-corrected by the FEC are counted over the Day.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.4Counter64read-onlycurrent
jnxoptIfOTNPMCurrentDayMinFECBERMantissa
OBJECT-TYPE
The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum PreFEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.5Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayMinFECBERExponent
OBJECT-TYPE
The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum PreFEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayMaxFECBERMantissa
OBJECT-TYPE
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum PreFEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayMaxFECBERExponent
OBJECT-TYPE
The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum PreFEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayAvgFECBERMantissa
OBJECT-TYPE
The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average PreFEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMCurrentDayAvgFECBERExponent
OBJECT-TYPE
The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average PreFEC BER in the current 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMFECCurrentDayElapsedTime
OBJECT-TYPE
Time elapsed for current day.
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.11Unsigned32read-onlycurrent
jnxoptIfOTNPMFECCurDaySuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild
1.3.6.1.4.1.2636.3.73.1.3.3.10.1.12Integer32read-onlycurrent
jnxoptIfOTNPMFECPrevDayTable
OBJECT-TYPE
A Performance monitoring FEC previous day table.
1.3.6.1.4.1.2636.3.73.1.3.3.11not-accessiblecurrent
jnxoptIfOTNPMFECPrevDayEntry
OBJECT-TYPE
A conceptual entry in the Near end or Far End performance monitoring FEC previous day table.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1not-accessiblecurrent
jnxoptIfOTNPMFECPrevDayType
OBJECT-TYPE
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.1JnxoptIfOTNTypenot-accessiblecurrent
jnxoptIfOTNPMFECPrevDaySuspectedFlag
OBJECT-TYPE
If true, the data in this entry may be unreliable.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.2TruthValueread-onlycurrent
jnxoptIfOTNPMPrevDayFECCorrectedErr
OBJECT-TYPE
The number of bits corrected by the FEC are counted in the previous day.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.3Counter64read-onlycurrent
jnxoptIfOTNPMPrevDayFECUncorrectedWords
OBJECT-TYPE
The number of un-corrected words by the FEC are counted over the previous Day.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.4Counter64read-onlycurrent
jnxoptIfOTNPMPrevDayMinFECBERMantissa
OBJECT-TYPE
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.5Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayMinFECBERExponent
OBJECT-TYPE
The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the previous 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.6Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayMaxFECBERMantissa
OBJECT-TYPE
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period (mantissa).
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.7Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayMaxFECBERExponent
OBJECT-TYPE
The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the maximum Pre FEC BER in the previous 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.8Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayAvgFECBERMantissa
OBJECT-TYPE
The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER during the previous 24hour period (mantissa).
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.9Unsigned32read-onlycurrent
jnxoptIfOTNPMPrevDayAvgFECBERExponent
OBJECT-TYPE
The average bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the average Pre FEC BER during the previous 24hour period.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.10Unsigned32read-onlycurrent
jnxoptIfOTNPMFECPrevDayTimeStamp
OBJECT-TYPE
Time stamp for the Prev day.
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.11DateAndTimeread-onlycurrent
jnxoptIfOTNPMFECPrevDaySuspectReason
OBJECT-TYPE
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild
1.3.6.1.4.1.2636.3.73.1.3.3.11.1.12Integer32read-onlycurrent
jnxoptIfOTNAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.73.1.3.4
jnxoptIfOTNAlarmTable
OBJECT-TYPE
A table of alarm entries.
1.3.6.1.4.1.2636.3.73.1.3.4.1not-accessiblecurrent
jnxoptIfOTNAlarmEntry
OBJECT-TYPE
A conceptual entry in the alarm table.
1.3.6.1.4.1.2636.3.73.1.3.4.1.1not-accessiblecurrent
jnxoptIfOTNAlarmLocation
OBJECT-TYPE
The object identifies indicates if this entry was for Near end/Far end.
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.1JnxoptIfOTNTypeaccessible-for-notifycurrent
jnxoptIfOTNAlarmDirection
OBJECT-TYPE
The object identifies indicates if this entry was for for the Tx/Rx or both.
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.2JnxoptIfOTNDirectionaccessible-for-notifycurrent
jnxoptIfOTNAlarmLayer
OBJECT-TYPE
This specifies which sublayer this alarm is for.
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.3JnxoptIfOTNLayeraccessible-for-notifycurrent
jnxoptIfOTNAlarmTCMLevel
OBJECT-TYPE
TCM level 1-6 of the alarm. It will be 0 if alarm sublayer is OCh, OTUk or ODUk.
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.4Unsigned32accessible-for-notifycurrent
jnxoptIfOTNOChOTUkAlarmType
OBJECT-TYPE
This specifies the type of alarm of the sublayer 'jnxoptIfOTNAlarmLayer' for OCh/OTUk .
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.5JnxoptIfOTNOChAlarmsaccessible-for-notifycurrent
jnxoptIfOTNAlarmSeverity
OBJECT-TYPE
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.6JnxoptIfOTNAlarmSeverityaccessible-for-notifycurrent
jnxoptIfOTNAlarmDate
OBJECT-TYPE
This specifies the date and time when this alarm occurred.
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.7DateAndTimeaccessible-for-notifycurrent
jnxoptIfOTNODUkTcmAlarmType
OBJECT-TYPE
This specifies the type of alarm of the sublayer 'jnxoptIfOTNAlarmLayer' for ODUk/TCM .
1.3.6.1.4.1.2636.3.73.1.3.4.1.1.8JnxoptIfOTNODUkTcmAlarmsaccessible-for-notifycurrent

Notifications

NameOIDStatus
jnxoptIfOTNOChOTUkAlarmSet
NOTIFICATION-TYPE
Notification of a recently set OTN alarm of Layer and Type.
1.3.6.1.4.1.2636.3.73.1.3.0.1current
jnxoptIfOTNOChOTUkAlarmClear
NOTIFICATION-TYPE
Notification of a recently clear OTN alarm of Layer and Type.
1.3.6.1.4.1.2636.3.73.1.3.0.2current
jnxoptIfOTNODUkTcmAlarmSet
NOTIFICATION-TYPE
Notification of a recently set OTN alarm of Layer and Type.
1.3.6.1.4.1.2636.3.73.1.3.0.3current
jnxoptIfOTNODUkTcmAlarmClear
NOTIFICATION-TYPE
Notification of a recently clear OTN alarm of Layer and Type.
1.3.6.1.4.1.2636.3.73.1.3.0.4current