MIBs Depot

JUNIPER-IFOTN-MIB

Registered at
1.3.6.1.4.1.2636.3.70.1
1.3.6.1.4.1.2636.4.21.0
Last updated
2016-09-12 20:15
Organization
Juniper Networks, Inc.
Revisions
2016-09-12 20:15, 2016-09-12 20:15, 2016-07-27 11:00, 2015-06-24 12:27, 2016-09-12 20:15, 2015-06-24 12:27, 2012-01-27 00:00, 2012-01-27 00:00
Namespace
juniper
Source file
JUNIPER-IFOTN-MIB
Digest
sha256:54b6ceec7b112432334316b3aa29c4467dfdb1b73ba71f3ded0d76cd32f4edd7

Description

Deprecated OCh2 tables and entries

Contact

Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net

Imports

FromSymbols
IF-MIBifDescr, ifIndex
JNX-OPT-IF-EXT-MIBJnxoptIfOTNOChAlarms, JnxoptIfOTNODUkTcmAlarms
JUNIPER-SMIjnxIfOtnMibRoot, jnxIfOtnNotifications
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
JNX-OPT-IF-EXT-MIB
JNX-OPT-IF-MIB
JUNIPER-IFOTN-MIB
JUNIPER-SMI
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JnxIfAdminStates
TEXTUAL-CONVENTION
Admin states for an interface
current
JnxIfOperStates
TEXTUAL-CONVENTION
Operational states for an interface
current
JnxIfOtnDirection
TEXTUAL-CONVENTION
Direction for the entities in the table
current
JnxIfOtnFecType
TEXTUAL-CONVENTION
fec modes of an interface
current
JnxIfOtnLayer
TEXTUAL-CONVENTION
Layer which describes the table
current
JnxIfOtnRate
TEXTUAL-CONVENTION
Rates for an interface
current
JnxIfOtnServiceStateAction
TEXTUAL-CONVENTION
Notification's action on the service state
current
JnxIfOtnSeverity
TEXTUAL-CONVENTION
Severity of the Notification
current
JnxIfOtnType
TEXTUAL-CONVENTION
Near End or Far End
current

Objects

NameOIDSyntaxAccessStatus
jnxIfOtn
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.70.1.1
jnxIfOtnOChCfgTable
OBJECT-TYPE
Information about the Otn OCh Config Table.
1.3.6.1.4.1.2636.3.70.1.1.1not-accessiblecurrent
jnxIfOtnOChCfgEntry
OBJECT-TYPE
A conceptual row that contains of the Otn OCh Config Table.
1.3.6.1.4.1.2636.3.70.1.1.1.1not-accessiblecurrent
jnxIfOtnOChCfgContainerIndex
OBJECT-TYPE
The associated jnxContentsContainerIndex - eg shelf..
1.3.6.1.4.1.2636.3.70.1.1.1.1.1Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnOChCfgL1Index
OBJECT-TYPE
The level one index associated with this subject ... eg fpc slot.
1.3.6.1.4.1.2636.3.70.1.1.1.1.2Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnOChCfgL2Index
OBJECT-TYPE
The level two index associated with this subject .. eg pic slot.
1.3.6.1.4.1.2636.3.70.1.1.1.1.3Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnOChCfgL3Index
OBJECT-TYPE
The level three index associated with this subject.. eg port.
1.3.6.1.4.1.2636.3.70.1.1.1.1.4Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnLocalLoopback
OBJECT-TYPE
This is the local loopback at the Line (after the optics).
1.3.6.1.4.1.2636.3.70.1.1.1.1.5TruthValueread-writecurrent
jnxIfOtnLineLoopback
OBJECT-TYPE
This is the line loopback at the Line.
1.3.6.1.4.1.2636.3.70.1.1.1.1.6TruthValueread-writecurrent
jnxIfOtnPayloadLoopback
OBJECT-TYPE
This is the Payload loopback before the optics.
1.3.6.1.4.1.2636.3.70.1.1.1.1.7TruthValueread-writecurrent
jnxIfOtnAdminState
OBJECT-TYPE
The Admin state of this interface
1.3.6.1.4.1.2636.3.70.1.1.1.1.8JnxIfAdminStatesread-writecurrent
jnxIfOtnOperState
OBJECT-TYPE
The operational state of this interface
1.3.6.1.4.1.2636.3.70.1.1.1.1.9JnxIfOperStatesread-onlycurrent
jnxIfOtnIndex
OBJECT-TYPE
The interface ifIndex of this interface
1.3.6.1.4.1.2636.3.70.1.1.1.1.10Unsigned32read-onlycurrent
jnxIfOtnOChStatus
OBJECT-TYPE
The interface status at the OCh layer.
1.3.6.1.4.1.2636.3.70.1.1.1.1.11Bits {los(0), lof(1), lom(2), wavelengthlockerr(3)}read-onlycurrent
jnxIfOtnOChPortMode
OBJECT-TYPE
The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp
1.3.6.1.4.1.2636.3.70.1.1.1.1.12Unsigned32read-onlycurrent
jnxIfOtnOTUkCfgTable
OBJECT-TYPE
Information about the Otn OTUk config table.
1.3.6.1.4.1.2636.3.70.1.1.2not-accessiblecurrent
jnxIfOtnOTUkCfgEntry
OBJECT-TYPE
A conceptual row that contains the Otn OTUk config table.
1.3.6.1.4.1.2636.3.70.1.1.2.1not-accessiblecurrent
jnxIfOtnOTUkCfgContainerIndex
OBJECT-TYPE
The associated jnxContentsContainerIndex - eg shelf.
1.3.6.1.4.1.2636.3.70.1.1.2.1.1Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnOTUkCfgL1Index
OBJECT-TYPE
The level one index associated with this subject ... eg fpc slot.
1.3.6.1.4.1.2636.3.70.1.1.2.1.2Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnOTUkCfgL2Index
OBJECT-TYPE
The level two index associated with this subject .. eg pic slot.
1.3.6.1.4.1.2636.3.70.1.1.2.1.3Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnOTUkCfgL3Index
OBJECT-TYPE
The level three index associated with this subject.. eg port.
1.3.6.1.4.1.2636.3.70.1.1.2.1.4Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnOTUkCfgRate
OBJECT-TYPE
This is the rate for the interface and the rates depend on the interface/fru type.
1.3.6.1.4.1.2636.3.70.1.1.2.1.5JnxIfOtnRateread-writecurrent
jnxIfOtnOTUkCfgFecMode
OBJECT-TYPE
This is the Fec type in the OTU frame and the selection depends on the interface/fru type.
1.3.6.1.4.1.2636.3.70.1.1.2.1.6JnxIfOtnFecTyperead-writecurrent
jnxIfOtnOTUkEnableAutoFrrByteInsert
OBJECT-TYPE
This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES)
1.3.6.1.4.1.2636.3.70.1.1.2.1.7TruthValueread-writecurrent
jnxIfOtnOTUkEnableBERFrrSupport
OBJECT-TYPE
This will enable/disable the FRR support for BER
1.3.6.1.4.1.2636.3.70.1.1.2.1.8TruthValueread-writecurrent
jnxIfOtnOTUkPreFecBERThresholdMantissa
OBJECT-TYPE
This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade.
1.3.6.1.4.1.2636.3.70.1.1.2.1.9Integer32read-writecurrent
jnxIfOtnOTUkPreFecBERThresholdExponent
OBJECT-TYPE
This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade.
1.3.6.1.4.1.2636.3.70.1.1.2.1.10Integer32read-writecurrent
jnxIfOtnOTUkPreFecBERThresholdTime
OBJECT-TYPE
The collection times (1ms - 1sec) to calculate the BER.
1.3.6.1.4.1.2636.3.70.1.1.2.1.11Integer32read-writecurrent
jnxIfOtnOTUkTIMActEnabled
OBJECT-TYPE
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
1.3.6.1.4.1.2636.3.70.1.1.2.1.12TruthValueread-writecurrent
jnxIfOtnOTUkTxTTI
OBJECT-TYPE
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
1.3.6.1.4.1.2636.3.70.1.1.2.1.13OCTET STRING (SIZE(0..64))read-writecurrent
jnxIfOtnOTUkRxTTI
OBJECT-TYPE
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
1.3.6.1.4.1.2636.3.70.1.1.2.1.14OCTET STRING (SIZE(64))read-onlycurrent
jnxIfOtnOTUkExpectedRxSapi
OBJECT-TYPE
Expected receive SAPI.
1.3.6.1.4.1.2636.3.70.1.1.2.1.15OCTET STRING (SIZE(0..16))read-writecurrent
jnxIfOtnOTUkExpectedRxDapi
OBJECT-TYPE
Expected receive DAPI.
1.3.6.1.4.1.2636.3.70.1.1.2.1.16OCTET STRING (SIZE(0..16))read-writecurrent
jnxIfOtnOTUkStatus
OBJECT-TYPE
The interface status at the OTUk layer.
1.3.6.1.4.1.2636.3.70.1.1.2.1.17Bits {ais(0), bdi(1), iae(2), ttim(3), sf(4), sd(5), biae(6), tsf(7), ssf(8), fecexcessive(9), fecdegrade(10), fefecerr(11)}read-onlycurrent
jnxIfOtnOTUkPreFecBERThresholdClearMantissa
OBJECT-TYPE
This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
1.3.6.1.4.1.2636.3.70.1.1.2.1.18Integer32read-writecurrent
jnxIfOtnOTUkPreFecBERThresholdClearExponent
OBJECT-TYPE
This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
1.3.6.1.4.1.2636.3.70.1.1.2.1.19Integer32read-writecurrent
jnxIfOtnOTUkTxSapiTTIFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.2.1.20TruthValueread-writecurrent
jnxIfOtnOTUkTxDapiTTIFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.2.1.21TruthValueread-writecurrent
jnxIfOtnOTUkExpectedRxSapiFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.2.1.22TruthValueread-writecurrent
jnxIfOtnOTUkExpectedRxDapiFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.2.1.23TruthValueread-writecurrent
jnxIfOtnODUkCfgTable
OBJECT-TYPE
Information about the Otn ODUk config table.
1.3.6.1.4.1.2636.3.70.1.1.3not-accessiblecurrent
jnxIfOtnODUkCfgEntry
OBJECT-TYPE
A conceptual row that contains information about the Otn ODUk config.
1.3.6.1.4.1.2636.3.70.1.1.3.1not-accessiblecurrent
jnxIfOtnODUkCfgContainerIndex
OBJECT-TYPE
The associated jnxContentsContainerIndex - eg shelf..
1.3.6.1.4.1.2636.3.70.1.1.3.1.1Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnODUkCfgL1Index
OBJECT-TYPE
The level one index associated with this subject ... eg fpc slot.
1.3.6.1.4.1.2636.3.70.1.1.3.1.2Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnODUkCfgL2Index
OBJECT-TYPE
The level two index associated with this subject .. eg pic slot.
1.3.6.1.4.1.2636.3.70.1.1.3.1.3Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnODUkCfgL3Index
OBJECT-TYPE
The level three index associated with this subject.. eg port.
1.3.6.1.4.1.2636.3.70.1.1.3.1.4Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnODUkAPSPCC0
OBJECT-TYPE
Read/Write APS PCC byte 0 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.1.3.1.5Integer32 (0..255)read-writecurrent
jnxIfOtnODUkAPSPCC1
OBJECT-TYPE
Read/Write APS PCC byte 1 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.1.3.1.6Integer32 (0..255)read-writecurrent
jnxIfOtnODUkAPSPCC2
OBJECT-TYPE
Read/Write APS PCC byte 2 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.1.3.1.7Integer32 (0..255)read-writecurrent
jnxIfOtnODUkAPSPCC3
OBJECT-TYPE
Read/Write APS PCC byte 3 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.1.3.1.8Integer32 (0..255)read-writecurrent
jnxIfOtnODUkPayloadType
OBJECT-TYPE
Read/Write Payload Type for ODUk only.
1.3.6.1.4.1.2636.3.70.1.1.3.1.9Integer32 (0..255)read-writecurrent
jnxIfOtnODUkTIMActEnabled
OBJECT-TYPE
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
1.3.6.1.4.1.2636.3.70.1.1.3.1.10TruthValueread-writecurrent
jnxIfOtnODUkTxTTI
OBJECT-TYPE
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.1.3.1.11OCTET STRING (SIZE(0..64))read-writecurrent
jnxIfOtnODUkRxTTI
OBJECT-TYPE
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.1.3.1.12OCTET STRING (SIZE(64))read-onlycurrent
jnxIfOtnODUkExpectedRxSapi
OBJECT-TYPE
Expected receive SAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.1.3.1.13OCTET STRING (SIZE(0..16))read-writecurrent
jnxIfOtnODUkExpectedRxDapi
OBJECT-TYPE
Expected receive DAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.1.3.1.14OCTET STRING (SIZE(0..16))read-writecurrent
jnxIfOtnODUkStatus
OBJECT-TYPE
The status at the ODUk layer Only some of these alarms are valid for the TCM layer
1.3.6.1.4.1.2636.3.70.1.1.3.1.15Bits {ais(0), bdi(1), iae(2), ttim(3), sf(4), sd(5), biae(6), tsf(7), ssf(8), csf(9), oci(10), lck(11), ltc(12), ptm(13)}read-onlycurrent
jnxIfOtnODUkRxPayloadType
OBJECT-TYPE
Receive Payload Type for ODUk only.
1.3.6.1.4.1.2636.3.70.1.1.3.1.16Integer32 (0..255)read-onlycurrent
jnxIfOtnODUkTxSapiTTIFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.3.1.17TruthValueread-writecurrent
jnxIfOtnODUkTxDapiTTIFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.3.1.18TruthValueread-writecurrent
jnxIfOtnODUkExpectedRxSapiFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.3.1.19TruthValueread-writecurrent
jnxIfOtnODUkExpectedRxDapiFstByteNul
OBJECT-TYPE
This will fill the first byte of TTI with all zero as per the G.709 recommendation.
1.3.6.1.4.1.2636.3.70.1.1.3.1.20TruthValueread-writecurrent
jnxIfOtnTcmCfgTable
OBJECT-TYPE
Information about the Otn TCM config table.
1.3.6.1.4.1.2636.3.70.1.1.4not-accessiblecurrent
jnxIfOtnTcmCfgEntry
OBJECT-TYPE
A conceptual row that contains information about the Otn Tcm config.
1.3.6.1.4.1.2636.3.70.1.1.4.1not-accessiblecurrent
jnxIfOtnTcmCfgContainerIndex
OBJECT-TYPE
The associated jnxContentsContainerIndex - eg shelf.
1.3.6.1.4.1.2636.3.70.1.1.4.1.1Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnTcmCfgL1Index
OBJECT-TYPE
The level one index associated with this subject ... eg fpc slot.
1.3.6.1.4.1.2636.3.70.1.1.4.1.2Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnTcmCfgL2Index
OBJECT-TYPE
The level two index associated with this subject .. eg pic slot.
1.3.6.1.4.1.2636.3.70.1.1.4.1.3Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnTcmCfgL3Index
OBJECT-TYPE
The level three index associated with this subject.. eg port.
1.3.6.1.4.1.2636.3.70.1.1.4.1.4Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnTcmCfgLevel
OBJECT-TYPE
The TCM level for the Table
1.3.6.1.4.1.2636.3.70.1.1.4.1.5Integer32 (1..6)not-accessiblecurrent
jnxIfOtnTCMEnable
OBJECT-TYPE
Enable this TCM layer (only for TCM layers)
1.3.6.1.4.1.2636.3.70.1.1.4.1.6TruthValueread-writecurrent
jnxIfOtnTcmTxTTI
OBJECT-TYPE
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.1.4.1.7OCTET STRING (SIZE(0..64))read-writecurrent
jnxIfOtnTcmRxTTI
OBJECT-TYPE
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.1.4.1.8OCTET STRING (SIZE(64))read-onlycurrent
jnxIfOtnTcmExpectedRxSapi
OBJECT-TYPE
Expected receive SAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.1.4.1.9OCTET STRING (SIZE(0..16))read-writecurrent
jnxIfOtnTcmExpectedRxDapi
OBJECT-TYPE
Expected receive DAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.1.4.1.10OCTET STRING (SIZE(0..16))read-writecurrent
jnxIfOtnTcmStatus
OBJECT-TYPE
The status at the TCM layer.
1.3.6.1.4.1.2636.3.70.1.1.4.1.11Bits {ais(0), bdi(1), iae(2), ttim(3), biae(6), tsf(7), ssf(8), ltc(9)}read-onlycurrent
jnxIfOtnODUkTcmTestTable
OBJECT-TYPE
Information about the Otn ODUk Test function table.
1.3.6.1.4.1.2636.3.70.1.1.5not-accessiblecurrent
jnxIfOtnODUkTcmTestEntry
OBJECT-TYPE
A conceptual row that contains information about the Otn ODUk Test function.
1.3.6.1.4.1.2636.3.70.1.1.5.1not-accessiblecurrent
jnxIfOtnODUkTcmTestLayer
OBJECT-TYPE
The layer OTU/ODU/TCM layer for the alarm
1.3.6.1.4.1.2636.3.70.1.1.5.1.1JnxIfOtnLayernot-accessiblecurrent
jnxIfOtnODUkTcmTestTCMLevel
OBJECT-TYPE
For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6.
1.3.6.1.4.1.2636.3.70.1.1.5.1.2Integer32 (0..6)not-accessiblecurrent
jnxIfOtnODUkTcmInsertAis
OBJECT-TYPE
Insert ODU Ais into OTN stream.
1.3.6.1.4.1.2636.3.70.1.1.5.1.3TruthValueread-writecurrent
jnxIfOtnODUkTcmInsertLck
OBJECT-TYPE
Insert ODU Lck into OTN stream.
1.3.6.1.4.1.2636.3.70.1.1.5.1.4TruthValueread-writecurrent
jnxIfOtnODUkTcmInsertOci
OBJECT-TYPE
Insert ODU Oci into OTN stream.
1.3.6.1.4.1.2636.3.70.1.1.5.1.5TruthValueread-writecurrent
jnxIfOtnODUkPayloadPRBS
OBJECT-TYPE
Insert Payload PRBS, For ODUK layer and TCM level is 0.
1.3.6.1.4.1.2636.3.70.1.1.5.1.6TruthValueread-writecurrent
jnxIfOtnODUkPayloadPRBSResult
OBJECT-TYPE
Result of the Payload PRBS .
1.3.6.1.4.1.2636.3.70.1.1.5.1.7OCTET STRINGread-onlycurrent
jnxIfOtnODUkTcmDMTable
OBJECT-TYPE
Table for Otn ODUk/TCM Delay Measurement config table.
1.3.6.1.4.1.2636.3.70.1.1.6not-accessiblecurrent
jnxIfOtnODUkTcmDMEntry
OBJECT-TYPE
A conceptual row that contains information about the Delay Measurement test table.
1.3.6.1.4.1.2636.3.70.1.1.6.1not-accessiblecurrent
jnxIfOtnODUkTcmDMLayer
OBJECT-TYPE
The layer OTU/ODU/TCM layer for the alarm
1.3.6.1.4.1.2636.3.70.1.1.6.1.1JnxIfOtnLayernot-accessiblecurrent
jnxIfOtnODUkTcmDMLevel
OBJECT-TYPE
For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6.
1.3.6.1.4.1.2636.3.70.1.1.6.1.2Integer32 (0..6)not-accessiblecurrent
jnxIfOtnDMConnectionMonitoringEndpoint
OBJECT-TYPE
Originate Connection Monitoring Endpoint for the Delay Measurement
1.3.6.1.4.1.2636.3.70.1.1.6.1.3TruthValueread-writecurrent
jnxIfOtnDMBypass
OBJECT-TYPE
Act as tandem, passing Dm value through node
1.3.6.1.4.1.2636.3.70.1.1.6.1.4TruthValueread-writecurrent
jnxIfOtnDMPersistFrames
OBJECT-TYPE
Number of consequtive frames required to declare Dm Complete
1.3.6.1.4.1.2636.3.70.1.1.6.1.5Integer32read-writecurrent
jnxIfOtnDMEnable
OBJECT-TYPE
Start/Stop the DM measurement
1.3.6.1.4.1.2636.3.70.1.1.6.1.6TruthValueread-writecurrent
jnxIfOtnDMRemoteLoopEnable
OBJECT-TYPE
Remote Loop Enable/Disable
1.3.6.1.4.1.2636.3.70.1.1.6.1.7TruthValueread-writecurrent
jnxIfOtnNotificationTrigDefaultHoldtimeUp
OBJECT-TYPE
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
1.3.6.1.4.1.2636.3.70.1.1.7Integer32read-writecurrent
jnxIfOtnNotificationTrigDefaultHoldtimeDown
OBJECT-TYPE
This object will indicate the time (ms) for the defect to absent before the alarm is cleared.
1.3.6.1.4.1.2636.3.70.1.1.8Integer32read-writecurrent
jnxIfOtnNotificationTrigTable
OBJECT-TYPE
Information about the otn Alarm/Alart/Info trigger table.
1.3.6.1.4.1.2636.3.70.1.1.9not-accessiblecurrent
jnxIfOtnNotificationTrigEntry
OBJECT-TYPE
A conceptual row that contains information about the Otn Alarm Trigger Table.
1.3.6.1.4.1.2636.3.70.1.1.9.1not-accessiblecurrent
jnxIfOtnNotificationTrigContainerIndex
OBJECT-TYPE
The associated jnxContentsContainerIndex - eg shelf.
1.3.6.1.4.1.2636.3.70.1.1.9.1.1Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnNotificationTrigL1Index
OBJECT-TYPE
The level one index associated with this subject ... eg fpc slot.
1.3.6.1.4.1.2636.3.70.1.1.9.1.2Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnNotificationTrigL2Index
OBJECT-TYPE
The level two index associated with this subject .. eg pic slot.
1.3.6.1.4.1.2636.3.70.1.1.9.1.3Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnNotificationTrigL3Index
OBJECT-TYPE
The level three index associated with this subject.. eg port.
1.3.6.1.4.1.2636.3.70.1.1.9.1.4Integer32 (1..1024)not-accessiblecurrent
jnxIfOtnNotificationTrigLayer
OBJECT-TYPE
The layer OTU/ODU/TCM layer for the alarm
1.3.6.1.4.1.2636.3.70.1.1.9.1.5JnxIfOtnLayernot-accessiblecurrent
jnxIfOtnNotificationTrigTCMLevel
OBJECT-TYPE
For OCh/OTUk/ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6.
1.3.6.1.4.1.2636.3.70.1.1.9.1.6Integer32 (0..6)not-accessiblecurrent
jnxIfOtnNotificationTrigAlmId
OBJECT-TYPE
This will be the ID of Alarm for that layer 'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'.
1.3.6.1.4.1.2636.3.70.1.1.9.1.7Integer32 (0..255)not-accessiblecurrent
jnxIfOtnNotificationTrigSeverity
OBJECT-TYPE
This will be the Severity of the Notification for that layer.
1.3.6.1.4.1.2636.3.70.1.1.9.1.8JnxIfOtnSeverityread-writecurrent
jnxIfOtnNotificationTrigIgnore
OBJECT-TYPE
This object will ignore the alarm when set.
1.3.6.1.4.1.2636.3.70.1.1.9.1.9TruthValueread-writecurrent
jnxIfOtnNotificationTrigHoldtimeUp
OBJECT-TYPE
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
1.3.6.1.4.1.2636.3.70.1.1.9.1.10Integer32read-writecurrent
jnxIfOtnNotificationTrigHoldtimeDown
OBJECT-TYPE
This object will indicate the time (ms) for the defect is absent before the alarm is cleared.
1.3.6.1.4.1.2636.3.70.1.1.9.1.11Integer32read-writecurrent
jnxIfOtnTrigServiceStateAction
OBJECT-TYPE
This will indicate whether this alarm is service affecting or not .
1.3.6.1.4.1.2636.3.70.1.1.9.1.12JnxIfOtnServiceStateActionread-onlycurrent
jnxOtnClearAllPMs
OBJECT-TYPE
To clear all Performance monitoring counters on OTN interfaces
1.3.6.1.4.1.2636.3.70.1.1.10TruthValueread-writecurrent
jnxOtnClearInterfacePMs
OBJECT-TYPE
To clear all Performance monitoring counters on this OTN interfaces
1.3.6.1.4.1.2636.3.70.1.1.11TruthValueread-writecurrent
jnxOtnClearInterfaceCurrentPM
OBJECT-TYPE
To clear the current Performance monitoring counters on this OTN interfaces
1.3.6.1.4.1.2636.3.70.1.1.12TruthValueread-writecurrent
jnxOtnClearIfPMsTable
OBJECT-TYPE
To clear OTN Performance monitoring counters on this OTN interfaces
1.3.6.1.4.1.2636.3.70.1.1.13not-accessiblecurrent
jnxOtnClearIfPMsEntry
OBJECT-TYPE
A conceptual row that s used to clear the OTN PM Table.
1.3.6.1.4.1.2636.3.70.1.1.13.1not-accessiblecurrent
jnxOtnClearCurrent
OBJECT-TYPE
1- to clear all the current OTN PM's for this interface
1.3.6.1.4.1.2636.3.70.1.1.13.1.1TruthValueread-writecurrent
jnxOtnClearInterfaceInterval
OBJECT-TYPE
1- to clear all the OTN PM's intervals(1-96) for this interface
1.3.6.1.4.1.2636.3.70.1.1.13.1.2TruthValueread-writecurrent
jnxOtnClearInterfaceDay
OBJECT-TYPE
1 - to clear all the Current Day and Previous Day OTN PM's for this interface
1.3.6.1.4.1.2636.3.70.1.1.13.1.3TruthValueread-writecurrent
jnxOtnClearInterfaceAll
OBJECT-TYPE
1 - to clear all the OTN PM's for this interface
1.3.6.1.4.1.2636.3.70.1.1.13.1.4TruthValueread-writecurrent
jnxIfOtnOCh2
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.70.1.2
jnxIfOtnOCh2CfgTable
OBJECT-TYPE
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 Config Table.
1.3.6.1.4.1.2636.3.70.1.2.1not-accessibleobsolete
jnxIfOtnOCh2CfgEntry
OBJECT-TYPE
A conceptual row that contains of the Otn OCh2 Config Table.
1.3.6.1.4.1.2636.3.70.1.2.1.1not-accessibleobsolete
jnxIfOtnOCh2CfgContainerIndex
OBJECT-TYPE
Container Index associated with the object instance.
1.3.6.1.4.1.2636.3.70.1.2.1.1.1Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2CfgL1Index
OBJECT-TYPE
FPC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.1.1.2Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2CfgL2Index
OBJECT-TYPE
PIC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.1.1.3Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2CfgL3Index
OBJECT-TYPE
Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.1.1.4Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2CfgL4Index
OBJECT-TYPE
Sub-Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.1.1.5Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2LocalLoopback
OBJECT-TYPE
This is the local loopback at the Line (after the optics).
1.3.6.1.4.1.2636.3.70.1.2.1.1.6TruthValueread-writeobsolete
jnxIfOtnOCh2LineLoopback
OBJECT-TYPE
This is the line loopback at the Line.
1.3.6.1.4.1.2636.3.70.1.2.1.1.7TruthValueread-writeobsolete
jnxIfOtnOCh2PayloadLoopback
OBJECT-TYPE
This is the Payload loopback before the optics.
1.3.6.1.4.1.2636.3.70.1.2.1.1.8TruthValueread-writeobsolete
jnxIfOtnOCh2AdminState
OBJECT-TYPE
The Admin state of this interface
1.3.6.1.4.1.2636.3.70.1.2.1.1.9JnxIfAdminStatesread-writeobsolete
jnxIfOtnOCh2OperState
OBJECT-TYPE
The operational state of this interface
1.3.6.1.4.1.2636.3.70.1.2.1.1.10JnxIfOperStatesread-onlyobsolete
jnxIfOtnOCh2Index
OBJECT-TYPE
The interface ifIndex of this interface
1.3.6.1.4.1.2636.3.70.1.2.1.1.11Unsigned32read-onlyobsolete
jnxIfOtnOCh2Status
OBJECT-TYPE
The interface status at the OCh layer.
1.3.6.1.4.1.2636.3.70.1.2.1.1.12Bits {los(0), lof(1), lom(2), wavelengthlockerr(3)}read-onlycurrent
jnxIfOtnOCh2PortMode
OBJECT-TYPE
The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp
1.3.6.1.4.1.2636.3.70.1.2.1.1.13Unsigned32read-onlyobsolete
jnxIfOtnOCh2OTUkCfgTable
OBJECT-TYPE
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 OTUk config table.
1.3.6.1.4.1.2636.3.70.1.2.2not-accessibleobsolete
jnxIfOtnOCh2OTUkCfgEntry
OBJECT-TYPE
A conceptual row that contains the Otn OCh2 OTUk config table.
1.3.6.1.4.1.2636.3.70.1.2.2.1not-accessibleobsolete
jnxIfOtnOCh2OTUkCfgContIndx
OBJECT-TYPE
Container Index associated with the object instance.
1.3.6.1.4.1.2636.3.70.1.2.2.1.1Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2OTUkCfgL1Index
OBJECT-TYPE
FPC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.2.1.2Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2OTUkCfgL2Index
OBJECT-TYPE
PIC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.2.1.3Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2OTUkCfgL3Index
OBJECT-TYPE
Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.2.1.4Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2OTUkCfgL4Index
OBJECT-TYPE
Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.2.1.5Integer32 (1..1024)not-accessibleobsolete
jnxIfOtnOCh2OTUkCfgRate
OBJECT-TYPE
This is the rate for the interface and the rates depend on the interface/fru type.
1.3.6.1.4.1.2636.3.70.1.2.2.1.6JnxIfOtnRateread-writeobsolete
jnxIfOtnOCh2OTUkCfgFecMode
OBJECT-TYPE
This is the Fec type in the OTU frame and the selection depends on the interface/fru type.
1.3.6.1.4.1.2636.3.70.1.2.2.1.7JnxIfOtnFecTyperead-writeobsolete
jnxIfOtnOCh2OTUkEnAutoFrrByteIns
OBJECT-TYPE
This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES)
1.3.6.1.4.1.2636.3.70.1.2.2.1.8TruthValueread-writeobsolete
jnxIfOtnOCh2OTUkEnBERFrrSupport
OBJECT-TYPE
This will enable/disable the FRR support for BER
1.3.6.1.4.1.2636.3.70.1.2.2.1.9TruthValueread-writeobsolete
jnxIfOtnOCh2OTUkPreFecBERThMant
OBJECT-TYPE
This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade.
1.3.6.1.4.1.2636.3.70.1.2.2.1.10Integer32read-writeobsolete
jnxIfOtnOCh2OTUkPreFecBERThExpo
OBJECT-TYPE
This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade.
1.3.6.1.4.1.2636.3.70.1.2.2.1.11Integer32read-writeobsolete
jnxIfOtnOCh2OTUkPreFecBERThTime
OBJECT-TYPE
The collection times (1ms - 1sec) to calculate the BER.
1.3.6.1.4.1.2636.3.70.1.2.2.1.12Integer32read-writeobsolete
jnxIfOtnOCh2OTUkTIMActEnabled
OBJECT-TYPE
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
1.3.6.1.4.1.2636.3.70.1.2.2.1.13TruthValueread-writeobsolete
jnxIfOtnOCh2OTUkTxTTI
OBJECT-TYPE
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
1.3.6.1.4.1.2636.3.70.1.2.2.1.14OCTET STRING (SIZE(0..64))read-writeobsolete
jnxIfOtnOCh2OTUkRxTTI
OBJECT-TYPE
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
1.3.6.1.4.1.2636.3.70.1.2.2.1.15OCTET STRING (SIZE(64))read-onlyobsolete
jnxIfOtnOCh2OTUkExpectedRxSapi
OBJECT-TYPE
Expected receive SAPI.
1.3.6.1.4.1.2636.3.70.1.2.2.1.16OCTET STRING (SIZE(0..16))read-writeobsolete
jnxIfOtnOCh2OTUkExpectedRxDapi
OBJECT-TYPE
Expected receive DAPI.
1.3.6.1.4.1.2636.3.70.1.2.2.1.17OCTET STRING (SIZE(0..16))read-writeobsolete
jnxIfOtnOCh2OTUkStatus
OBJECT-TYPE
The interface status at the OTUk layer.
1.3.6.1.4.1.2636.3.70.1.2.2.1.18Bits {ais(0), bdi(1), iae(2), ttim(3), sf(4), sd(5), biae(6), tsf(7), ssf(8), fecexcessive(9), fecdegrade(10)}read-onlyobsolete
jnxIfOtnOCh2OTUkPreFecBERThClrMn
OBJECT-TYPE
This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
1.3.6.1.4.1.2636.3.70.1.2.2.1.19Integer32read-writeobsolete
jnxIfOtnOCh2OTUkPreFecBERThClrEx
OBJECT-TYPE
This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
1.3.6.1.4.1.2636.3.70.1.2.2.1.20Integer32read-writeobsolete
jnxIfOtnOCh2ODUkCfgTable
OBJECT-TYPE
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn ODUk config table.
1.3.6.1.4.1.2636.3.70.1.2.3not-accessibleobsolete
jnxIfOtnOCh2ODUkCfgEntry
OBJECT-TYPE
A conceptual row that contains information about the Otn ODUk config.
1.3.6.1.4.1.2636.3.70.1.2.3.1not-accessibleobsolete
jnxIfOtnOCh2ODUkCfgContIndx
OBJECT-TYPE
Container Index associated with the Object Instance.
1.3.6.1.4.1.2636.3.70.1.2.3.1.1Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2ODUkCfgL1Index
OBJECT-TYPE
FPC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.3.1.2Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2ODUkCfgL2Index
OBJECT-TYPE
PIC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.3.1.3Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2ODUkCfgL3Index
OBJECT-TYPE
Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.3.1.4Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2ODUkCfgL4Index
OBJECT-TYPE
Sub-Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.3.1.5Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2ODUkAPSPCC0
OBJECT-TYPE
Read/Write APS PCC byte 0 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.2.3.1.6Integer32 (0..255)read-writeobsolete
jnxIfOtnOCh2ODUkAPSPCC1
OBJECT-TYPE
Read/Write APS PCC byte 1 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.2.3.1.7Integer32 (0..255)read-writeobsolete
jnxIfOtnOCh2ODUkAPSPCC2
OBJECT-TYPE
Read/Write APS PCC byte 2 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.2.3.1.8Integer32 (0..255)read-writeobsolete
jnxIfOtnOCh2ODUkAPSPCC3
OBJECT-TYPE
Read/Write APS PCC byte 3 for this ODUk only.
1.3.6.1.4.1.2636.3.70.1.2.3.1.9Integer32 (0..255)read-writeobsolete
jnxIfOtnOCh2ODUkPayloadType
OBJECT-TYPE
Read/Write Payload Type for ODUk only.
1.3.6.1.4.1.2636.3.70.1.2.3.1.10Integer32 (0..255)read-writeobsolete
jnxIfOtnOCh2ODUkTIMActEnabled
OBJECT-TYPE
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
1.3.6.1.4.1.2636.3.70.1.2.3.1.11TruthValueread-writeobsolete
jnxIfOtnOCh2ODUkTxTTI
OBJECT-TYPE
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.2.3.1.12OCTET STRING (SIZE(0..64))read-writeobsolete
jnxIfOtnOCh2ODUkRxTTI
OBJECT-TYPE
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.2.3.1.13OCTET STRING (SIZE(64))read-onlyobsolete
jnxIfOtnOCh2ODUkExpectedRxSapi
OBJECT-TYPE
Expected receive SAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.2.3.1.14OCTET STRING (SIZE(0..16))read-writeobsolete
jnxIfOtnOCh2ODUkExpectedRxDapi
OBJECT-TYPE
Expected receive DAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.2.3.1.15OCTET STRING (SIZE(0..16))read-writeobsolete
jnxIfOtnOCh2ODUkStatus
OBJECT-TYPE
The status at the ODUk layer Only some of these alarms are valid for the TCM layer
1.3.6.1.4.1.2636.3.70.1.2.3.1.16Bits {ais(0), bdi(1), iae(2), ttim(3), sf(4), sd(5), biae(6), tsf(7), ssf(8), csf(9), oci(10), lck(11), ltc(12), ptm(13)}read-onlycurrent
jnxIfOtnOCh2ODUkRxPayloadType
OBJECT-TYPE
Receive Payload Type for ODUk only.
1.3.6.1.4.1.2636.3.70.1.2.3.1.17Integer32 (0..255)read-onlyobsolete
jnxIfOtnOCh2TcmCfgTable
OBJECT-TYPE
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn TCM config table.
1.3.6.1.4.1.2636.3.70.1.2.4not-accessibleobsolete
jnxIfOtnOCh2TcmCfgEntry
OBJECT-TYPE
A conceptual row that contains information about the Otn Tcm config.
1.3.6.1.4.1.2636.3.70.1.2.4.1not-accessibleobsolete
jnxIfOtnOCh2TcmCfgContIndx
OBJECT-TYPE
Container Index associated with the object.
1.3.6.1.4.1.2636.3.70.1.2.4.1.1Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2TcmCfgL1Index
OBJECT-TYPE
FPC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.4.1.2Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2TcmCfgL2Index
OBJECT-TYPE
PIC slot number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.4.1.3Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2TcmCfgL3Index
OBJECT-TYPE
Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.4.1.4Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2TcmCfgL4Index
OBJECT-TYPE
Sub-Port number of the interface.
1.3.6.1.4.1.2636.3.70.1.2.4.1.5Integer32 (0..255)not-accessibleobsolete
jnxIfOtnOCh2TcmCfgLevel
OBJECT-TYPE
The TCM level for the Table
1.3.6.1.4.1.2636.3.70.1.2.4.1.6Integer32 (1..6)not-accessibleobsolete
jnxIfOtnOCh2TCMEnable
OBJECT-TYPE
Enable this TCM layer (only for TCM layers)
1.3.6.1.4.1.2636.3.70.1.2.4.1.7TruthValueread-writeobsolete
jnxIfOtnOCh2TcmTxTTI
OBJECT-TYPE
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.2.4.1.8OCTET STRING (SIZE(0..64))read-writeobsolete
jnxIfOtnOCh2TcmRxTTI
OBJECT-TYPE
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
1.3.6.1.4.1.2636.3.70.1.2.4.1.9OCTET STRING (SIZE(64))read-onlyobsolete
jnxIfOtnOCh2TcmExpectedRxSapi
OBJECT-TYPE
Expected receive SAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.2.4.1.10OCTET STRING (SIZE(0..16))read-writeobsolete
jnxIfOtnOCh2TcmExpectedRxDapi
OBJECT-TYPE
Expected receive DAPI for this layer.
1.3.6.1.4.1.2636.3.70.1.2.4.1.11OCTET STRING (SIZE(0..16))read-writeobsolete
jnxIfOtnOCh2TcmStatus
OBJECT-TYPE
The status at the TCM layer.
1.3.6.1.4.1.2636.3.70.1.2.4.1.12Bits {ais(0), bdi(1), iae(2), ttim(3), biae(6), tsf(7), ssf(8), ltc(9)}read-onlyobsolete
jnxIfOtnNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.2636.4.21.0

Notifications

NameOIDStatus
jnxIfOtnNotificationAdminStatus
NOTIFICATION-TYPE
Notification of the admin state of the otn interface.
1.3.6.1.4.1.2636.4.21.0.1current
jnxIfOtnNotificationOperStatus
NOTIFICATION-TYPE
Notification of operational state of the otn interface
1.3.6.1.4.1.2636.4.21.0.2current