MIBs Depot

HUAWEI-PORT-MIB

Registered at
1.3.6.1.4.1.2011.5.25.157
Last updated
2017-07-08 18:26
Organization
Huawei Technologies Co.,Ltd.
Revisions
2017-07-08 18:26, 2017-04-27 23:34, 2017-03-28 11:30, 2017-03-15 09:09, 2017-01-24 14:30, 2017-01-04 17:30, 2016-12-16 17:30, 2016-10-12 20:26, 2016-09-25 23:34, 2016-08-15 11:06, 2016-08-02 22:11, 2016-07-25 15:08, 2016-07-21 11:45, 2016-06-16 10:54, 2016-05-11 18:50, 2016-05-04 18:50, 2016-04-25 15:26, 2016-04-18 09:26, 2016-03-29 15:16, 2016-02-17 16:34, 2015-12-01 11:08, 2015-10-19 11:05, 2015-10-16 11:05, 2015-10-09 11:05, 2015-08-22 11:38, 2015-08-22 11:38, 2015-08-22 11:38, 2015-07-10 11:39, 2015-04-11 00:00, 2015-04-10 00:00, 2015-04-03 00:00, 2015-03-25 00:00, 2015-03-24 10:02, 2015-03-19 10:00, 2015-03-16 14:16, 2015-03-02 10:09, 2015-02-06 00:00, 2015-01-31 14:00, 2014-08-22 11:42, 2014-08-22 11:42, 2014-08-22 11:42, 2014-08-22 11:42, 2014-06-12 11:40, 2014-04-16 21:41, 2014-04-11 11:50, 2014-04-02 10:11, 2014-03-31 17:11, 2014-03-24 17:00, 2014-02-21 10:38, 2014-02-14 11:35, 2013-12-24 09:55, 2013-12-23 11:01, 2013-12-04 16:42, 2013-11-16 11:54, 2013-10-28 10:16, 2013-10-14 20:26, 2013-09-06 09:54, 2013-08-08 21:27, 2013-07-09 17:16, 2013-07-05 14:25, 2013-06-27 14:22, 2013-06-14 18:51, 2013-05-31 17:51, 2013-05-08 17:51, 2013-03-25 10:39, 2011-05-18 09:30
Namespace
huawei
Source file
HUAWEI-PORT-MIB
Digest
sha256:a039f3e51f71360751ef075799d646892e9beb769f263e749f2cf6943456fec0

Description

The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
ENTITY-MIBentPhysicalName
HUAWEI-GTL-MIBhwGtlItemName
HUAWEI-IMA-MIBImaFrameLength, ImaGroupState
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
ENTITY-MIB
HUAWEI-GTL-MIB
HUAWEI-IMA-MIB
HUAWEI-MIB
HUAWEI-PORT-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
hwPortMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1
hwEthernet
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.1
hwEthernetTable
OBJECT-TYPE
Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces.
1.3.6.1.4.1.2011.5.25.157.1.1.1not-accessiblecurrent
hwEthernetEntry
OBJECT-TYPE
Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1not-accessiblecurrent
hwEthernetIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1InterfaceIndexnot-accessiblecurrent
hwEthernetLoopback
OBJECT-TYPE
The local loopback of an Ethernet interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11INTEGER {otherLoop(1), stopLoopback(2), local(3), remote(4)}read-writecurrent
hwEthernetPortType
OBJECT-TYPE
Indicates the type of the Ethernet interface: an optical interface or an electrical interface.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12INTEGER {other(1), copper(2), fiber(3)}read-writecurrent
hwEthernetSpeedSet
OBJECT-TYPE
Indicates the speed of the Ethernet interface. This parameter takes effect only on some Ethernet electrical interfaces rather than optical interfaces. The parameter can be 10 M, 100 M, 1000 M, 10000 M,40000 M,20000 M,2500 M,5000 M,100000 M,12000 M,48000 M.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13INTEGER {other(1), speed10(2), speed100(3), speed1000(4), speed10000(5), speed40000(6), speed20000(7), speed2500(8), speed5000(9), speed100000(10), speed12000(11), speed48000(12)}read-writecurrent
hwEthernetDuplex
OBJECT-TYPE
Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14INTEGER {full(1), half(2)}read-writecurrent
hwEthernetNegotiation
OBJECT-TYPE
Indicates the auto-negotiation mode of the Ethernet electrical interface. By default, auto-negotiation is enabled. The three objects, hwEthernetSpeedSet, hwEthernetDuplex, and hwEthernetNegotiation are associated with each other. If the auto-negotiation of hwEthernetNegotiation is enabled, the values of hwEthernetSpeedSet and hwEthernetDuplex are auto-negotiated. If hwEthernetSpeedSet is set to a certain value, hwEthernetDuplex is modified to the default value full, and hwEthernetNegotiation is automatically changed to disable. If the auto-negotiation of hwEthernetNegotiation is enabled, hwEthernetDuplex cannot be set.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15EnabledStatusread-writecurrent
hwEthernetPortTypeOperate
OBJECT-TYPE
Indicates the link type of the Ethernet interface. The type can be optical link or electrical link. This parameter takes effect only on specific Ethernet interfaces.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16INTEGER {other(1), copper(2), fiber100(3), fiber1000(4)}read-writecurrent
hwEthernetClock
OBJECT-TYPE
Indicates the mode of the clock. The mode can be master or slave. By default, the mode of a clock is slave. This parameter takes effect only on the WAN board.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20INTEGER {master(1), slave(2)}read-writecurrent
hwEthernetFlagJ0Mode
OBJECT-TYPE
Before the 10 GE WAN board processes packets, the overhead byte must be configured on the interface. The overhead byte for the SDH frame, j0: Set section trace byte The default value is j016ByteMode(2):hwEthernetFlagJ0Trace:NetEngine
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21INTEGER {j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4)}read-writecurrent
hwEthernetFlagJ0Value
OBJECT-TYPE
j01ByteMode Value. When hwEthernetFlagJ0Mode is set to j01ByteMode, this parameter takes effect.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22Integer32 (0..255)read-writecurrent
hwEthernetFlagJ0Trace
OBJECT-TYPE
Set section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23OCTET STRING (SIZE(0..64))read-writecurrent
hwEthernetFlagJ1Mode
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. j1:sets path trace byte. The default value is j116ByteMode(2) hwEthernetFlagJ1Trace NetEngine.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24INTEGER {j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4)}read-writecurrent
hwEthernetFlagJ1Value
OBJECT-TYPE
j11ByteMode Value. When hwEthernetFlagJ1Mode is set to j11ByteMode, this parameter takes effect.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25Integer32 (0..255)read-writecurrent
hwEthernetFlagJ1Trace
OBJECT-TYPE
Set path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26OCTET STRING (SIZE(0..64))read-writecurrent
hwEthernetFlagC2Value
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27Integer32 (0..255)read-writecurrent
hwEthernetUpHoldTime
OBJECT-TYPE
Indicates the response time to the event that the port turns Up. The units of hwEthernetUpHoldTime is millisecond.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31Integer32 (0..86400000)read-writecurrent
hwEthernetDownHoldTime
OBJECT-TYPE
Indicates the response time to the event that the port turns Down. The units of hwEthernetDownHoldTime is millisecond.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32Integer32 (0..86400000)read-writecurrent
hwEthernetSubinterfaceStatisticEnable
OBJECT-TYPE
Enable the statistical function of the sub-interface.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33EnabledStatusread-writecurrent
hwEthernetFlowControl
OBJECT-TYPE
Set flow control of this port.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34INTEGER {receive(1), send(2), both(3), none(4), default(5)}read-writecurrent
hwEthernetOffline
OBJECT-TYPE
Set Line protocol state to down of this port.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35INTEGER {true(1), false(2)}read-writecurrent
hwEthernetSetTransferMode
OBJECT-TYPE
Set transfer mode of this port.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36INTEGER {lan(1), wan(2), none(3), otn(4)}read-writecurrent
hwEthernetJumboframeMaxLength
OBJECT-TYPE
Set the jumboframe max length of this port.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37Integer32 (1536..16000)read-writecurrent
hwEthernetComboType
OBJECT-TYPE
combo mode of this port.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38INTEGER {auto(1), copper(2), fiber(3), other(4)}read-writecurrent
hwEthernetPortMode
OBJECT-TYPE
Indicates combo mode of this port.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39INTEGER {copper(1), fiber(2), other(3)}read-onlycurrent
hwEthernetNegotiationMode
OBJECT-TYPE
Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock.
1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40INTEGER {notsupport(1), auto(2), master(3), slave(4)}read-writecurrent
hwPos
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.2
hwPosTable
OBJECT-TYPE
Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface.
1.3.6.1.4.1.2011.5.25.157.1.2.1not-accessiblecurrent
hwPosEntry
OBJECT-TYPE
Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1not-accessiblecurrent
hwPosIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.1InterfaceIndexnot-accessiblecurrent
hwPosLinkProtocol
OBJECT-TYPE
Indicates the link layer protocol of the POS interface. By default, on a POS interface, PPP serves as the link layer protocol.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.11INTEGER {ietf(1), nonstandard(2), hdlc(3), ppp(4)}read-writecurrent
hwPosFrameFormat
OBJECT-TYPE
Indicates the frame type of the POS interface. By default, the frame type of the POS interface is SDH. This variable identifies whether a SONET or a SDH signal is used across this interface.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.12INTEGER {sonet(1), sdh(2)}read-writecurrent
hwPosLoopback
OBJECT-TYPE
The local loopback of a POS interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.13INTEGER {otherLoop(1), stopLoopback(2), local(3), remote(4)}read-writecurrent
hwPosScramble
OBJECT-TYPE
Indicates the scramble function of payload. By default, the scramble function of payload is enabled.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.14EnabledStatusread-writecurrent
hwPosClock
OBJECT-TYPE
Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.15INTEGER {master(1), slave(2)}read-writecurrent
hwPosCrcVerifyCode
OBJECT-TYPE
Indicates the length of the CRC verity code. The default value is 32.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.16INTEGER {crc16(1), crc32(2)}read-writecurrent
hwPosFlagJ0Mode
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwPosFlagJ0Trace:NetEngine.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.21INTEGER {j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4)}read-writecurrent
hwPosFlagJ0Value
OBJECT-TYPE
Indicates the value of j01ByteMode. When hwPosFlagJ0Mode is set to j01ByteMode, hwPosFlagJ0Value takes effect.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.22Integer32 (0..127)read-writecurrent
hwPosFlagJ0Trace
OBJECT-TYPE
Set section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwPosFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte. When hwPosFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23OCTET STRING (SIZE(0..64))read-writecurrent
hwPosFlagJ1Mode
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwPosFlagJ1Trace:NetEngine.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.24INTEGER {j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4)}read-writecurrent
hwPosFlagJ1Value
OBJECT-TYPE
Indicates the value of j11ByteMode. When hwPosFlagJ1Mode is set to j11ByteMode, hwPosFlagJ1Value takes effect.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.25Integer32 (0..127)read-writecurrent
hwPosFlagJ1Trace
OBJECT-TYPE
Set path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwPosFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwPosFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.26OCTET STRING (SIZE(0..64))read-writecurrent
hwPosFlagC2Value
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02.
1.3.6.1.4.1.2011.5.25.157.1.2.1.1.27Integer32 (0..255)read-writecurrent
hwCpos
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.3
hwCposTable
OBJECT-TYPE
Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface.
1.3.6.1.4.1.2011.5.25.157.1.3.1not-accessiblecurrent
hwCposEntry
OBJECT-TYPE
Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1not-accessiblecurrent
hwCposIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.1InterfaceIndexnot-accessiblecurrent
hwCposClock
OBJECT-TYPE
Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.11INTEGER {master(1), slave(2)}read-writecurrent
hwCposIfType
OBJECT-TYPE
Indicates the interface type.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12INTEGER {stm1(1), stm16(2)}read-writecurrent
hwCposFrameFormat
OBJECT-TYPE
Indicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.13INTEGER {sonet(1), sdh(2)}read-writecurrent
hwCposMultiplex
OBJECT-TYPE
Indicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.14INTEGER {au3(1), au4(2)}read-writecurrent
hwCposLoopback
OBJECT-TYPE
Indicates the loopback function of the CPOS interface. By default, the loopback function is disabled.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.15INTEGER {otherloop(1), stopLoopback(2), local(3), remote(4)}read-writecurrent
hwCposFlagJ0Mode
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.21INTEGER {j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4)}read-writecurrent
hwCposFlagJ0Value
OBJECT-TYPE
j01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.22Integer32 (0..127)read-writecurrent
hwCposFlagJ0Trace
OBJECT-TYPE
Set section trace byte. When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwCposFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwCposFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.23OCTET STRING (SIZE(0..64))read-writecurrent
hwCposFlagJ1Mode
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.24INTEGER {j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4)}read-writecurrent
hwCposFlagJ1Value
OBJECT-TYPE
Indicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.25Integer32 (0..127)read-writecurrent
hwCposFlagJ1Trace
OBJECT-TYPE
Set path trace byte. When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwCposFlagJ1Mode is set to j116ByteMode, this variable is a string up to 15 characters trace byte. When hwCposFlagJ1Mode is set to j164ByteOrNullMode, this variable is a string up to 64 characters trace byte.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.26OCTET STRING (SIZE(0..64))read-writecurrent
hwCposFlagC2Value
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16).
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.27Integer32 (0..255)read-writecurrent
hwCposB1SdAlarmThreshold
OBJECT-TYPE
The threshold of B1 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.28Integer32 (1..9)read-writecurrent
hwCposB1ExcAlarmThreshold
OBJECT-TYPE
The threshold of B1 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.29Integer32 (1..9)read-writecurrent
hwCposB2SdAlarmThreshold
OBJECT-TYPE
The threshold of B2 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.30Integer32 (1..9)read-writecurrent
hwCposB2ExcAlarmThreshold
OBJECT-TYPE
The threshold of B2 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.31Integer32 (1..9)read-writecurrent
hwCposB3SdAlarmThreshold
OBJECT-TYPE
The threshold of B3 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.32Integer32 (1..9)read-writecurrent
hwCposB3ExcAlarmThreshold
OBJECT-TYPE
The threshold of B3 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.33Integer32 (1..9)read-writecurrent
hwCposLpBipSdAlarmThreshold
OBJECT-TYPE
The threshold of BIP2 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.34Integer32 (1..9)read-writecurrent
hwCposLpBipExcAlarmThreshold
OBJECT-TYPE
The threshold of BIP2 threshold crossing alarm.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.35Integer32 (1..9)read-writecurrent
hwCposHighPathNumber
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16).
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.36Integer32 (0..255)read-onlycurrent
hwCposLowPathNumber
OBJECT-TYPE
Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16).
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.37Integer32 (0..255)read-onlycurrent
hwCposMappingMode
OBJECT-TYPE
Indicates the mapping mode of cpos port, default if h-mode(1).
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.38INTEGER {hMode(1), lMode(2), aMode(3)}read-writecurrent
hwCposRxJ0Mode
OBJECT-TYPE
Indicates the received J0 mode.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.39INTEGER {j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4)}read-onlycurrent
hwCposRxJ1Mode
OBJECT-TYPE
Indicates the received J1 mode.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.40INTEGER {j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4)}read-onlycurrent
hwCposRxJ0Value
OBJECT-TYPE
Indicates the received J0 value of 1-byte mode.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.41Integer32 (0..127)read-onlycurrent
hwCposRxJ1Value
OBJECT-TYPE
Indicates the received J1 value of 1-byte mode.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.42Integer32 (0..127)read-onlycurrent
hwCposRxJ0Trace
OBJECT-TYPE
Indicates the received J0 characters of 16-byte or 64-byte mode.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.43OCTET STRING (SIZE(0..64))read-onlycurrent
hwCposRxJ1Trace
OBJECT-TYPE
Indicates the received J1 characters of 16-byte or 64-byte mode.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.44OCTET STRING (SIZE(0..64))read-onlycurrent
hwCposVc4Flag
OBJECT-TYPE
The value of this object identifies whether a VC4 channel can be created on the CPOS interface. 0 indicates that no VC4 channel can be created on the CPOS interface. 1 indicates that a VC4 channel can be created but has not been created on the CPOS interface. 2 indicates that a VC4 channel can be created and has been created on the CPOS interface.
1.3.6.1.4.1.2011.5.25.157.1.3.1.1.45Integer32 (0..2)read-onlycurrent
hwPortPhysicalHpIndex
OBJECT-TYPE
Indicates the higher order path number.
1.3.6.1.4.1.2011.5.25.157.1.3.2Integer32accessible-for-notifycurrent
hwPortPhysicalLpIndex
OBJECT-TYPE
Indicates the low order path number.
1.3.6.1.4.1.2011.5.25.157.1.3.3Integer32accessible-for-notifycurrent
hwCposLpTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.157.1.3.4not-accessiblecurrent
hwCposLpEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1not-accessiblecurrent
hwCposLpIfIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.1InterfaceIndexnot-accessiblecurrent
hwCposLpId
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.2Integer32not-accessiblecurrent
hwCposFlagJ2Mode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.3INTEGER {j21ByteMode(1), j216ByteMode(2)}read-writecurrent
hwCposFlagJ2Value
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.4Integer32 (0..127)read-writecurrent
hwCposFlagJ2Trace
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.5OCTET STRING (SIZE(0..16))read-writecurrent
hwCposRxJ2Mode
OBJECT-TYPE
Indicates the received J2 mode.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.6INTEGER {j21ByteMode(1), j216ByteMode(2)}read-onlycurrent
hwCposRxJ2Value
OBJECT-TYPE
Indicates the received J2 value of 1-byte mode.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.7Integer32 (0..127)read-onlycurrent
hwCposRxJ2Trace
OBJECT-TYPE
Indicates the received J2 characters of 16-byte or 64-byte mode.
1.3.6.1.4.1.2011.5.25.157.1.3.4.1.8OCTET STRING (SIZE(0..16))read-onlycurrent
hwDs0ChannelBundle
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.4
hwDs0ChannelBundleTable
OBJECT-TYPE
This table is used to bundle timeslots of CE1/CT1 interfaces.
1.3.6.1.4.1.2011.5.25.157.1.4.1not-accessiblecurrent
hwDs0ChannelBundleEntry
OBJECT-TYPE
This table is used to bundle timeslots of CE1/CT1 interfaces.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1not-accessiblecurrent
hwDs0ChannelBundleParentIfIndex
OBJECT-TYPE
Indicates the index of the parent interface.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.1InterfaceIndexaccessible-for-notifycurrent
hwDs0ChannelBundleDs1ChannelId
OBJECT-TYPE
Indicates the channel ID.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.2Integer32accessible-for-notifycurrent
hwDs0ChannelBundleId
OBJECT-TYPE
Indicates the index number of the channel set.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.3Integer32 (0..30)accessible-for-notifycurrent
hwDs0ChannelBundleIfIndex
OBJECT-TYPE
Indicates the index of the serial interface formed by the timeslot binding.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.11InterfaceIndexread-createcurrent
hwDs0ChannelBundleTimeSlots
OBJECT-TYPE
Indicates the number of the range of the timeslot to be bound. The value is an integer ranging from 0 to 31. Multiple timeslots are separated by ','. The range of timeslot is expressed by using '-'. For E1 card mode: If the timeslots are '0-31', it means unframed format, If the timeslots are '0-30', it means framed format, For T1 card mode: If the timeslots are '0-23', it means unframed format, If the timeslots are '0-22', it means framed format, and hwDs0ChannelBundleDs1ChannelId and hwDs0ChannelBundleId should be zero.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.12OCTET STRING (SIZE(0..61))read-createcurrent
hwDs0ChannelBundleSpeed
OBJECT-TYPE
Configures the mode to configure the timeslots. If the parameter 56 k is selected, the timeslots are bound in the mode of N x 56 kbit/s. If the parameter 64 k is selected, the timeslots are bound in the mode of N x 64 kbit/s. If the parameter 150336 k is selected, the interface is used for remarking the CEP interface. The default value is 64kbit/s.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.13INTEGER {s56(1), s64(2), s150336(3)}read-createcurrent
hwDs0ChannelBundleTimeSlot0
OBJECT-TYPE
Indicates the timeslot0 to be bound or a single channel. The ture value indicates it will be create TDM channel.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.14TruthValueread-createcurrent
hwDs0ChannelBundleIsMasterPW
OBJECT-TYPE
Indicates if the pw configed on this port is master pw.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.15INTEGER {notacrpw(0), masterpw(1), notmasterpw(2)}read-onlycurrent
hwDs0ChannelBundleMasterPWStatus
OBJECT-TYPE
Indicates the status of master pw.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.16INTEGER {unlock(0), lock(1)}read-onlycurrent
hwDs0ChannelBundlePortName
OBJECT-TYPE
Port name.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.17OCTET STRINGread-onlycurrent
hwDs0ChannelBundleRowStatus
OBJECT-TYPE
This variable is used to create or delete an object.
1.3.6.1.4.1.2011.5.25.157.1.4.1.1.51RowStatusread-createcurrent
hwDs1
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.5
hwDs1Table
OBJECT-TYPE
This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces.
1.3.6.1.4.1.2011.5.25.157.1.5.1not-accessiblecurrent
hwDs1Entry
OBJECT-TYPE
This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1not-accessiblecurrent
hwDs1ParentIfIndex
OBJECT-TYPE
Indicates the index of the parent interface.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1InterfaceIndexnot-accessiblecurrent
hwDs1ChannelId
OBJECT-TYPE
Indicates the channel ID.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2Integer32 (0..63)accessible-for-notifycurrent
hwDs1IfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3InterfaceIndexnot-accessiblecurrent
hwDs1ChannelType
OBJECT-TYPE
Indicates the interface type. The type can be E1/CE1 or T1/CT1.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11INTEGER {t1(1), e1(2)}read-createcurrent
hwDs1IfType
OBJECT-TYPE
Indicates the interface tyep. e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is multiplexed by ATM interfaces. none: indicates the physical interface. default:none
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12INTEGER {e3(1), t3(2), cpos(3), atm(4), none(255)}read-createcurrent
hwDs1Channelized
OBJECT-TYPE
Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13TruthValueread-createcurrent
hwDs1CodeType
OBJECT-TYPE
Indicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Substitution. none: is not supported
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14INTEGER {ami(1), hdb3(2), b8zs(3), none(255)}read-createcurrent
hwDs1Clock
OBJECT-TYPE
Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15INTEGER {master(1), slave(2)}read-createcurrent
hwDs1FrameFormat
OBJECT-TYPE
Indicates the frame format of the interface. crc4: indicates that the frame format is CRC4. no-crc4: indicates that the frame format is no-CRC4. sf: indicates that the frame format is Super Frame. esf: indicates that the frame format is Extended Super Frame. By default, the frame format of an E1 interface is no-crc4. By default, the frame format of a T1 interface is esf.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16INTEGER {esf(1), sf(2), noCrc4(3), crc(4)}read-createcurrent
hwDs1Cable
OBJECT-TYPE
The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17INTEGER {long(1), short(2), none(255)}read-createcurrent
hwDs1Loopback
OBJECT-TYPE
Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18INTEGER {local(1), remote(2), payload(3), cell(4), none(255)}read-createcurrent
hwDs1ClockRecoveryDomain
OBJECT-TYPE
Indicates the clock recovery domain of the interface.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19Integer32 (0..8)read-createcurrent
hwDs1PWClockDomain
OBJECT-TYPE
Indicates the clock recovery domain of the interface.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20Integer32 (0..8)read-createcurrent
hwDs1WorkMode
OBJECT-TYPE
Indicates the clock recovery domain of the interface.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21Integer32 (0..8)read-onlycurrent
hwDs1EsAlarmTriggerThreshold
OBJECT-TYPE
The trigger threshold of code violation count threshold crossing alarm of E1 line side .
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22Integer32 (1..900)read-writecurrent
hwDs1EsAlarmResumeThreshold
OBJECT-TYPE
The resume threshold of code violation count threshold crossing alarm of E1 line side .
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23Integer32 (1..900)read-writecurrent
hwDs1RowStatus
OBJECT-TYPE
This variable is used to create or delete an object.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51RowStatusread-createcurrent
hwDs1Lbo
OBJECT-TYPE
The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52INTEGER {db75(1), db155(2), db225(3), none(4), notsupport(5)}read-createcurrent
hwDs1CableLength
OBJECT-TYPE
The cableLength of T1 port. Unit: feet.
1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53INTEGER {length133(1), length266(2), length399(3), length533(4), length655(5), notsupport(6), none(255)}read-createcurrent
hwDs3
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.6
hwDs3Table
OBJECT-TYPE
This table lists all E3/CE3 interfaces or all T3/CT3 interfaces.
1.3.6.1.4.1.2011.5.25.157.1.6.1not-accessiblecurrent
hwDs3Entry
OBJECT-TYPE
This table lists all E3/CE3 interfaces or all T3/CT3 interfaces.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1not-accessiblecurrent
hwDs3ParentIfIndex
OBJECT-TYPE
Indicates the index of the parent interface.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.1InterfaceIndexnot-accessiblecurrent
hwDs3ChannelId
OBJECT-TYPE
Indicates the index of the parent interface.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.2Integer32 (0..3)not-accessiblecurrent
hwDs3IfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.3InterfaceIndexnot-accessiblecurrent
hwDs3ChannelType
OBJECT-TYPE
Indicates the interface type. The type can be E3/CE3 or T3/CT3.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.11INTEGER {t3(1), e3(2)}read-createcurrent
hwDs3IfType
OBJECT-TYPE
Indicates the parent interface type of the interface. cpos: is multiplexed by CPOS interfaces. none: indicates the interface is a physical interface. The default is none.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.12INTEGER {cpos(1), none(255)}read-createcurrent
hwDs3Channelized
OBJECT-TYPE
Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.13TruthValueread-createcurrent
hwDs3Clock
OBJECT-TYPE
Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.14INTEGER {master(1), slave(2)}read-createcurrent
hwDs3FrameFormat
OBJECT-TYPE
Indicates the frame format of the interface.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.15INTEGER {g832Adm(1), g751Adm(2), g751Plcp(3), cbitAdm(4), cbitPlcp(5), m23Adm(6), m23Plcp(7)}read-createcurrent
hwDs3Scramble
OBJECT-TYPE
Indicates the scramble function of the interface. true: enables the scramble function. false: disables the scramble function. The default is false.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.16TruthValueread-createcurrent
hwDs3Cable
OBJECT-TYPE
The cable command takes effect only if the E3 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.17INTEGER {long(1), short(2)}read-createcurrent
hwDs3NationalBit
OBJECT-TYPE
Indicates the national bit of the E3/CE3 interface. n0: indicates the national bit is 0 and the interface supports only the communication within a country. n1: indicates the national bit is 1 and the interface supports the international communication.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.18INTEGER {n0(1), n1(2)}read-createcurrent
hwDs3Loopback
OBJECT-TYPE
Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.19INTEGER {local(1), remote(2), payload(3), cell(4), none(255)}read-createcurrent
hwDs3CreateSerial
OBJECT-TYPE
Create serial interface from Ds3 interface. True create serial interface. False destroy serial interface.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.20TruthValueread-createcurrent
hwDs3RowStatus
OBJECT-TYPE
This variable is used to create or delete an object.
1.3.6.1.4.1.2011.5.25.157.1.6.1.1.51RowStatusread-createcurrent
hwBundleSerial
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.7
hwBundleSerialTable
OBJECT-TYPE
Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface.
1.3.6.1.4.1.2011.5.25.157.1.7.1not-accessiblecurrent
hwBundleSerialEntry
OBJECT-TYPE
Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface.
1.3.6.1.4.1.2011.5.25.157.1.7.1.1not-accessiblecurrent
hwBundleSerialIfIndex
OBJECT-TYPE
Interface index(es) of serial(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.7.1.1.1InterfaceIndexnot-accessiblecurrent
hwBundleSerialLinkProtocol
OBJECT-TYPE
The link-protocol of interface. The serial(s) always use PPP as its link-protocol for default.
1.3.6.1.4.1.2011.5.25.157.1.7.1.1.11INTEGER {ietf(1), nonstandard(2), hdlc(3), ppp(4), lapb(5), atm(6), tdm(7), none(255)}read-writecurrent
hwBundleSerialTimerHold
OBJECT-TYPE
Indicates the interval for sending Keepalive packets from the serial interface to the peer. The default is 10 seconds.
1.3.6.1.4.1.2011.5.25.157.1.7.1.1.12Integer32 (0..32767)read-writecurrent
hwBundleSerialLoopback
OBJECT-TYPE
true: enables the loopback on the serial interface. false: disables the loopback on the serial interface. By default, the loopback on the serial interface is disabled.
1.3.6.1.4.1.2011.5.25.157.1.7.1.1.13TruthValueread-writecurrent
hwBundleSerialCrcVerifyCode
OBJECT-TYPE
Indicates the length of the CRC verify code. The default is 32.
1.3.6.1.4.1.2011.5.25.157.1.7.1.1.14INTEGER {crc16(1), crc32(2)}read-writecurrent
hwPhysicalPort
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.8
hwPhysicalPortTable
OBJECT-TYPE
Indicates the attribute of the physical port.
1.3.6.1.4.1.2011.5.25.157.1.8.1not-accessiblecurrent
hwPhysicalPortEntry
OBJECT-TYPE
Indicates the attribute of the physical port.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1not-accessiblecurrent
hwPhysicalPortIfIndex
OBJECT-TYPE
Interface index(es) of physical port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1InterfaceIndexaccessible-for-notifycurrent
hwPhysicalPortDelayTime
OBJECT-TYPE
Indicates the port tx enabling delay time. The units of hwPhysicalPortDelayTime is millisecond. The default value is 0 ms.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2Unsigned32 (0..86400000)read-writecurrent
hwPhysicalPortDelayRemainTime
OBJECT-TYPE
Indicates the remnant time of enabling port-tx. The units of hwPhysicalPortDelayTime is millisecond.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3Unsigned32 (0..86400000)read-onlycurrent
hwPhysicalPortName
OBJECT-TYPE
Indicates the physical port name.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4OCTET STRINGread-onlycurrent
hwPhysicalPortInChassis
OBJECT-TYPE
Indicates the physical port in chassis.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5Integer32read-onlycurrent
hwPhysicalPortInSlot
OBJECT-TYPE
Indicates the SlotID.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6Integer32read-onlycurrent
hwPhysicalPortInCard
OBJECT-TYPE
Indicates the CardID.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7Integer32read-onlycurrent
hwPhysicalPortInPort
OBJECT-TYPE
Indicates the PortID.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8Integer32read-onlycurrent
hwPhysicalAutoShutLaserEnable
OBJECT-TYPE
Indicates enable or disable the laser auto shut . Default is disable.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9INTEGER {enable(1), disable(2), notsupport(255)}read-writecurrent
hwPhysicalAutoShutLaserOpenInterval
OBJECT-TYPE
Indicates the open interval of laser auto shut . The default value is 200 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10Integer32 (100..300 | 2147483647)read-writecurrent
hwPhysicalAutoShutLaserCloseInterval
OBJECT-TYPE
Indicates the close interval of laser auto shut . The default value is 6000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11Integer32 (200..30000 | 2147483647)read-writecurrent
hwPhysicalAutoShutLaserLongOpenInterval
OBJECT-TYPE
Indicates the long open interval of laser auto shut . The default value is 9000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12Integer32 (200..30000 | 2147483647)read-writecurrent
hwPhysicalLoopbackType
OBJECT-TYPE
The current state of loopbackType in port.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13INTEGER {stopLoopback(0), local(1), remote(2)}read-onlycurrent
hwPhysicalShutLaser
OBJECT-TYPE
Turn on or turn off the laser.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14INTEGER {off(1), on(2), notsupport(255)}read-writecurrent
hwPhysicalLaserStatus
OBJECT-TYPE
The current status of the laser.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15INTEGER {off(1), on(2), offline(3), notsupport(255)}read-onlycurrent
hwPhysicalPortHoldUp
OBJECT-TYPE
Indicates enable or disable the interface to remain Up , the default value is disable.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16INTEGER {disable(0), enable(1)}read-writecurrent
hwPhysicalPortAlarmInverseEnable
OBJECT-TYPE
Config port alarm inverse enable.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17INTEGER {enable(1), disable(2)}read-writecurrent
hwPhysicalPortInVsId
OBJECT-TYPE
VsId.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.18Integer32read-onlycurrent
hwPhysicalPortAlarmName
OBJECT-TYPE
Indicates the physical port alarm name.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19OCTET STRINGread-onlycurrent
hwInputRateChangeThresholdPercent
OBJECT-TYPE
Indicates the threshold for the input rate change, in percentage.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.20Integer32read-writecurrent
hwOutputRateChangeThresholdPercent
OBJECT-TYPE
Indicates the threshold for the output rate change, in percentage.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.21Integer32read-writecurrent
hwCurrentStatisticalPeriodRate
OBJECT-TYPE
Indicates the rate in the current statistical period.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.22Counter64read-onlycurrent
hwLastStatisticalPeriodRate
OBJECT-TYPE
Indicates the rate in the last statistical period.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.23Counter64read-onlycurrent
hwPortPhysicalRate
OBJECT-TYPE
Indicates the current physical rate.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.24Integer32read-onlycurrent
hwLicenseType
OBJECT-TYPE
Indicates the type of interface function-controlled license.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.25OCTET STRINGread-onlycurrent
hwMaxPortNum
OBJECT-TYPE
Indicates the Maximum number of available interfaces
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.26Integer32read-onlycurrent
hwUsedPortNum
OBJECT-TYPE
Indicates the Number of interfaces in use.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.27Integer32read-onlycurrent
hwPhysicalPortMode
OBJECT-TYPE
The current state of portMode in port.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.28INTEGER {eth1g(0), eth10g(1)}read-onlycurrent
hwScadaGroupId
OBJECT-TYPE
Indicates the scada group ID.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.29Integer32read-onlycurrent
hwPhysicalPortGroupID
OBJECT-TYPE
Indicates the physical port group ID.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30OCTET STRINGread-onlycurrent
hwPortTransModeReasonDescr
OBJECT-TYPE
Indicates the physical port transmission mode different reason.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31OCTET STRINGread-onlycurrent
hwAcBlockReason
OBJECT-TYPE
Indicates the AC block reason.
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.32OCTET STRINGread-onlycurrent
hwSDHRsMsPerfCurrentTable
OBJECT-TYPE
Indicates the performance stat of the Regenerator Section.
1.3.6.1.4.1.2011.5.25.157.1.8.2not-accessiblecurrent
hwSDHRsMsPerfCurrentEntry
OBJECT-TYPE
Indicates the performance stat of the Regenerator Section.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1not-accessiblecurrent
hwSDHRsMsPerfCurrentIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.1InterfaceIndexnot-accessiblecurrent
hwSDHRsMsPerfCurrentDataIndex
OBJECT-TYPE
Data index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.2Integer32 (0..1)not-accessiblecurrent
hwSDHRsPerfCurrentBBE
OBJECT-TYPE
Regenerator Section Background Block Error.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.3Integer32read-onlycurrent
hwSDHRsPerfCurrentES
OBJECT-TYPE
Regenerator Section Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.4Integer32read-onlycurrent
hwSDHRsPerfCurrentSES
OBJECT-TYPE
Regenerator Section Severely Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.5Integer32read-onlycurrent
hwSDHRsPerfCurrentUAS
OBJECT-TYPE
Regenerator section unavailable second.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.6Integer32read-onlycurrent
hwSDHMsPerfCurrentBBE
OBJECT-TYPE
Multiplex Section Background Block Error.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.7Integer32read-onlycurrent
hwSDHMsPerfCurrentES
OBJECT-TYPE
Multiplex Section Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.8Integer32read-onlycurrent
hwSDHMsPerfCurrentSES
OBJECT-TYPE
Multiplex Section Severely Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.9Integer32read-onlycurrent
hwSDHMsPerfCurrentUAS
OBJECT-TYPE
Multiplex Section Unavaliable Seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.10Integer32read-onlycurrent
hwSDHMsPerfCurrentFEBBE
OBJECT-TYPE
Multiplex Section Far end Background Block Error.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.11Integer32read-onlycurrent
hwSDHMsPerfCurrentFEES
OBJECT-TYPE
Multiplex Section Far end Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.12Integer32read-onlycurrent
hwSDHMsPerfCurrentFESES
OBJECT-TYPE
Multiplex Section Far end Severely Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.13Integer32read-onlycurrent
hwSDHMsPerfCurrentFEUAS
OBJECT-TYPE
Multiplex Section Far end Unavaliable Seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.2.1.14Integer32read-onlycurrent
hwSDHHpPerfCurrentTable
OBJECT-TYPE
Indicates the performance stat of the Higher order Path.
1.3.6.1.4.1.2011.5.25.157.1.8.3not-accessiblecurrent
hwSDHHpPerfCurrentEntry
OBJECT-TYPE
Indicates the performance stat of the Higher order Path.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1not-accessiblecurrent
hwSDHHpPerfCurrentIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.1InterfaceIndexaccessible-for-notifycurrent
hwSDHHpPerfCurrentHpIndex
OBJECT-TYPE
Higher order Path index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.2Integer32not-accessiblecurrent
hwSDHHpPerfCurrentDataIndex
OBJECT-TYPE
Data index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.3Integer32 (0..1)not-accessiblecurrent
hwSDHHpPerfCurrentBBE
OBJECT-TYPE
Multiplex Section Far end Unavaliable Seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.4Integer32read-onlycurrent
hwSDHHpPerfCurrentES
OBJECT-TYPE
Higher order Path Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.5Integer32read-onlycurrent
hwSDHHpPerfCurrentSES
OBJECT-TYPE
Higher order Path Severely Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.6Integer32read-onlycurrent
hwSDHHpPerfCurrentUAS
OBJECT-TYPE
Higher order Path Unavaliable Seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.7Integer32read-onlycurrent
hwSDHHpPerfCurrentFEBBE
OBJECT-TYPE
Higher order Path Far end Background Block Error.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.8Integer32read-onlycurrent
hwSDHHpPerfCurrentFEES
OBJECT-TYPE
Higher order Path Far end Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.9Integer32read-onlycurrent
hwSDHHpPerfCurrentFESES
OBJECT-TYPE
Higher order Path Far end Severely Errored Second.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.10Integer32read-onlycurrent
hwSDHHpPerfCurrentFEUAS
OBJECT-TYPE
Higher order Path Far end Unavaliable Seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.3.1.11Integer32read-onlycurrent
hwSDHLpPerfCurrentTable
OBJECT-TYPE
Indicates the performance stat of the Low order Path.
1.3.6.1.4.1.2011.5.25.157.1.8.4not-accessiblecurrent
hwSDHLpPerfCurrentEntry
OBJECT-TYPE
Indicates the performance stat of the Low order Path.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1not-accessiblecurrent
hwSDHLpPerfCurrentIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.1InterfaceIndexaccessible-for-notifycurrent
hwSDHLpPerfCurrentHpIndex
OBJECT-TYPE
Higher order Path index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.2Integer32not-accessiblecurrent
hwSDHLpPerfCurrentLpIndex
OBJECT-TYPE
Low order Path index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.3Integer32not-accessiblecurrent
hwSDHLpPerfCurrentDataIndex
OBJECT-TYPE
Data index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.4Integer32 (0..1)not-accessiblecurrent
hwSDHLpPerfCurrentBBE
OBJECT-TYPE
Low order Path Background Block Error.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.5Integer32read-onlycurrent
hwSDHLpPerfCurrentES
OBJECT-TYPE
Low order Path errored seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.6Integer32read-onlycurrent
hwSDHLpPerfCurrentSES
OBJECT-TYPE
Low order Path severely errored seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.7Integer32read-onlycurrent
hwSDHLpPerfCurrentUAS
OBJECT-TYPE
Low order Path Unavailable second.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.8Integer32read-onlycurrent
hwSDHLpPerfCurrentFEBBE
OBJECT-TYPE
Low order Path Far-end Background Block Error.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.9Integer32read-onlycurrent
hwSDHLpPerfCurrentFEES
OBJECT-TYPE
Low order Path Far-end errored seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.10Integer32read-onlycurrent
hwSDHLpPerfCurrentFESES
OBJECT-TYPE
Low order Path Far-end severely errored seconds.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.11Integer32read-onlycurrent
hwSDHLpPerfCurrentFEUAS
OBJECT-TYPE
Low order Path Far-end Unavailable second.
1.3.6.1.4.1.2011.5.25.157.1.8.4.1.12Integer32read-onlycurrent
hwPDHPerfCurrentTable
OBJECT-TYPE
Indicates the performance stat of the E1 line side.
1.3.6.1.4.1.2011.5.25.157.1.8.5not-accessiblecurrent
hwPDHPerfCurrentEntry
OBJECT-TYPE
Indicates the performance stat of the E1 line side.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1not-accessiblecurrent
hwPDHPerfCurrentIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1.1InterfaceIndexnot-accessiblecurrent
hwPDHPerfCurrentDataIndex
OBJECT-TYPE
Data index(es) of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1.2Integer32 (0..1)not-accessiblecurrent
hwPDHPerfCurrentBBE
OBJECT-TYPE
Low order Path Background Block Error.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1.3Integer32read-onlycurrent
hwPDHPerfCurrentES
OBJECT-TYPE
E1 line side code violation errored second.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1.4Integer32read-onlycurrent
hwPDHPerfCurrentSES
OBJECT-TYPE
E1 line side code violation severely errored second.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1.5Integer32read-onlycurrent
hwPDHPerfCurrentUAS
OBJECT-TYPE
E1 line side code violation loss-of-signal second.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1.6Integer32read-onlycurrent
hwPDHPerfCurrentLCV
OBJECT-TYPE
E1 line side code violation count.
1.3.6.1.4.1.2011.5.25.157.1.8.5.1.7Integer32read-onlycurrent
hwEthPortStatTable
OBJECT-TYPE
Indicates the stat of the ethernet interface.
1.3.6.1.4.1.2011.5.25.157.1.8.6not-accessiblecurrent
hwEthPortStatEntry
OBJECT-TYPE
Indicates the stat of the ethernet interface.
1.3.6.1.4.1.2011.5.25.157.1.8.6.1not-accessiblecurrent
hwEthPortStatIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.1InterfaceIndexnot-accessiblecurrent
hwEthPortStatBadBytes
OBJECT-TYPE
Indicates the stat of badbytes.
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.2Counter64read-onlycurrent
hwEthPortStatOutPut64Bytes
OBJECT-TYPE
The total number of packets (including bad packets) output that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.3Counter64read-onlycurrent
hwEthPortStatOutPut65to127Bytes
OBJECT-TYPE
The total number of packets (including bad packets) output that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.4Counter64read-onlycurrent
hwEthPortStatOutPut128to255Bytes
OBJECT-TYPE
The total number of packets (including bad packets) output that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.5Counter64read-onlycurrent
hwEthPortStatOutPut256to511Bytes
OBJECT-TYPE
The total number of packets (including bad packets) output that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)..
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.6Counter64read-onlycurrent
hwEthPortStatOutPut512to1023Bytes
OBJECT-TYPE
The total number of packets (including bad packets) output that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.7Counter64read-onlycurrent
hwEthPortStatOutPut1024to1518Bytes
OBJECT-TYPE
The total number of packets (including bad packets) output that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.8Counter64read-onlycurrent
hwEthPortStatOutPut1519toMaxBytes
OBJECT-TYPE
The total number of packets (including bad packets) output that were between 1519 and max length octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.2011.5.25.157.1.8.6.1.9Counter64read-onlycurrent
hwPhysicalPortGlobleCfg
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.8.7
hwLoopBackAutoClearEnable
OBJECT-TYPE
set loopback autoclear status enable(1) disable(2).
1.3.6.1.4.1.2011.5.25.157.1.8.7.1INTEGER {enable(1), disable(2)}read-writecurrent
hwLoopBackAutoClearPeriod
OBJECT-TYPE
set loopback autoclear period, unit minute,value range<1-2880> default<5 minute>.
1.3.6.1.4.1.2011.5.25.157.1.8.7.2Integer32 (1..2880)read-writecurrent
hwPortAlarmInverseEnable
OBJECT-TYPE
Config globle alarm inverse enable.
1.3.6.1.4.1.2011.5.25.157.1.8.7.3INTEGER {enable(1), disable(2)}read-writecurrent
hwDslGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.9
hwDslGroupTable
OBJECT-TYPE
Indicates the attributes of the dsl group.
1.3.6.1.4.1.2011.5.25.157.1.9.1not-accessiblecurrent
hwDslGroupEntry
OBJECT-TYPE
An entry in the dsl group table.
1.3.6.1.4.1.2011.5.25.157.1.9.1.1not-accessiblecurrent
hwDslGroupIfIndex
OBJECT-TYPE
Interface index(es) of dsl group present on the device.
1.3.6.1.4.1.2011.5.25.157.1.9.1.1.1InterfaceIndexread-onlycurrent
hwDslGroupWorkMode
OBJECT-TYPE
The dsl group of SHD4 card can work in efm or atm mode. Default is efm.
1.3.6.1.4.1.2011.5.25.157.1.9.1.1.2INTEGER {atm(1), efm(2)}read-writecurrent
hwDslGroupBisState
OBJECT-TYPE
Bis can be enabled or disabled in ATM mode of SHD4 card.
1.3.6.1.4.1.2011.5.25.157.1.9.1.1.3INTEGER {disable(1), enable(2), notSupport(3)}read-writecurrent
hwDslGroupEncapeMode
OBJECT-TYPE
The dsl group of AVD8 card can work in ETHoA-LLC mode or ETHoA-VCMUX mode. Default is ETHoA-LLC.
1.3.6.1.4.1.2011.5.25.157.1.9.1.1.4INTEGER {eoaLlc(1), eoaVcmux(2), notSupport(3)}read-writecurrent
hwDslGroupEnable
OBJECT-TYPE
Trigger the operation of binding dsl link(s) to the dsl group.
1.3.6.1.4.1.2011.5.25.157.1.9.1.1.5INTEGER {disable(1), enable(2), notSupport(3)}read-writecurrent
hwDslGroupRowStatus
OBJECT-TYPE
An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.
1.3.6.1.4.1.2011.5.25.157.1.9.1.1.60RowStatusread-createcurrent
hwDslGroupBoundVeTable
OBJECT-TYPE
Indicates the attributes of the dsl group bound virtual-ethernet.
1.3.6.1.4.1.2011.5.25.157.1.9.2not-accessiblecurrent
hwDslGroupBoundVeEntry
OBJECT-TYPE
An entry in the dsl group bound vitrual-ethernet table.
1.3.6.1.4.1.2011.5.25.157.1.9.2.1not-accessiblecurrent
hwDslGroupIfIndexOfBound
OBJECT-TYPE
Interface index(es) of dsl group present on the device.
1.3.6.1.4.1.2011.5.25.157.1.9.2.1.1InterfaceIndexread-onlycurrent
hwVirtualEthernetIfIndex
OBJECT-TYPE
The first virtual ethernet interface which the dsl group is bound to.
1.3.6.1.4.1.2011.5.25.157.1.9.2.1.2InterfaceIndexread-onlycurrent
hwDslGroupVpi
OBJECT-TYPE
VPI value of the 1st PVC pair.
1.3.6.1.4.1.2011.5.25.157.1.9.2.1.3Integer32 (0..4095)read-writecurrent
hwDslGroupVci
OBJECT-TYPE
VCI value of the 1st PVC pair.
1.3.6.1.4.1.2011.5.25.157.1.9.2.1.4Integer32 (0..65535)read-writecurrent
hwDslGroupPvcId
OBJECT-TYPE
Identifier for VPI/VCI Pair.
1.3.6.1.4.1.2011.5.25.157.1.9.2.1.5Integer32 (1..2)read-onlycurrent
hwBoundVeRowStatus
OBJECT-TYPE
An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.
1.3.6.1.4.1.2011.5.25.157.1.9.2.1.50RowStatusread-createobsolete
hwDslGroupBindVeTable
OBJECT-TYPE
Indicates the relation of the dsl group binding virtual-ethernet.
1.3.6.1.4.1.2011.5.25.157.1.9.3not-accessiblecurrent
hwDslGroupBindVeEntry
OBJECT-TYPE
An entry in the dsl group binding vitrual-ethernet table.
1.3.6.1.4.1.2011.5.25.157.1.9.3.1not-accessiblecurrent
hwDslGroupInterfaceIndex
OBJECT-TYPE
Interface index(es) of the dsl group present on the device.
1.3.6.1.4.1.2011.5.25.157.1.9.3.1.1InterfaceIndexread-onlycurrent
hwVirtualEthernetInterfaceIndex
OBJECT-TYPE
The virtual ethernet interface index which the dsl group is bound to.
1.3.6.1.4.1.2011.5.25.157.1.9.3.1.2InterfaceIndexread-onlycurrent
hwBindVeRowStatus
OBJECT-TYPE
An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.
1.3.6.1.4.1.2011.5.25.157.1.9.3.1.50RowStatusread-createcurrent
hwDslGroupIma
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.10
hwDslGroupImaTable
OBJECT-TYPE
Indicates the attributes of the dsl ima group.
1.3.6.1.4.1.2011.5.25.157.1.10.1not-accessiblecurrent
hwDslGroupImaEntry
OBJECT-TYPE
An entry of the dsl ima group table.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1not-accessiblecurrent
hwDslGroupImaIfIndex
OBJECT-TYPE
Interface index(es) of dsl group present on the device.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.1InterfaceIndexread-onlycurrent
hwDslGroupImaVersion
OBJECT-TYPE
Version of the ima group of SHD4I card. v0: ima protocol version 1.0; v1: ima protocol version 1.1.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.2INTEGER {v0(1), v1(2)}read-writecurrent
hwDslGroupImaFrameLen
OBJECT-TYPE
Frame length of the ima group of SHD4I card. If ima protocol version is 1.0, the frame length is only 128.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.3ImaFrameLengthread-writecurrent
hwDslGroupImaReset
OBJECT-TYPE
ima group reset for SHD4I card.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwDslGroupImaTxMinLinkNum
OBJECT-TYPE
Minimum active links number by TX direction.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.5Integer32 (1..4)read-writecurrent
hwDslGroupImaRxMinLinkNum
OBJECT-TYPE
Minimum active links number by RX direction.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.6Integer32 (1..4)read-writecurrent
hwDslGroupImaNeState
OBJECT-TYPE
The current state of the near-end ima group.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.7ImaGroupStateread-onlycurrent
hwDslGroupImaFeState
OBJECT-TYPE
The current state of the far-end ima group.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.8ImaGroupStateread-onlycurrent
hwDslGroupImaTxCellRate
OBJECT-TYPE
The current cell rate of ima group by TX direction.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.9Integer32read-onlycurrent
hwDslGroupImaRxCellRate
OBJECT-TYPE
The current cell rate of ima group by RX direction.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.10Integer32read-onlycurrent
hwDslGroupImaTxActLinkNum
OBJECT-TYPE
Number of active links by TX direction.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.11Integer32 (0..4)read-onlycurrent
hwDslGroupImaRxActLinkNum
OBJECT-TYPE
Number of active links by RX direction.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.12Integer32 (0..4)read-onlycurrent
hwDslGroupImaIfName
OBJECT-TYPE
The interface name of ima group.
1.3.6.1.4.1.2011.5.25.157.1.10.1.1.13OCTET STRINGread-onlycurrent
hwDslLinkTable
OBJECT-TYPE
Indicates the dsl link bound relation.
1.3.6.1.4.1.2011.5.25.157.1.11.1not-accessiblecurrent
hwDslLinkEntry
OBJECT-TYPE
An entry of the dsl link bound relation.
1.3.6.1.4.1.2011.5.25.157.1.11.1.1not-accessiblecurrent
hwBoundDslGroupIfIndex
OBJECT-TYPE
Interface index of dsl group which the dsl link bound to.
1.3.6.1.4.1.2011.5.25.157.1.11.1.1.1InterfaceIndexread-onlycurrent
hwDslLinkIfIndex
OBJECT-TYPE
Interface index of the dsl link device.
1.3.6.1.4.1.2011.5.25.157.1.11.1.1.2InterfaceIndexread-writecurrent
hwDslLinkIfName
OBJECT-TYPE
The interface name of the dsl link.
1.3.6.1.4.1.2011.5.25.157.1.11.1.1.4OCTET STRINGread-onlycurrent
hwBoundDslGroupIfName
OBJECT-TYPE
Interface index of dsl group which the dsl link bound to.
1.3.6.1.4.1.2011.5.25.157.1.11.1.1.5OCTET STRINGread-onlycurrent
hwDslLinkBoundRowStatus
OBJECT-TYPE
An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.
1.3.6.1.4.1.2011.5.25.157.1.11.1.1.50RowStatusread-createcurrent
hwPWAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.12
hwPWAlarmTable
OBJECT-TYPE
Indicates the attributes of the PW alarm.
1.3.6.1.4.1.2011.5.25.157.1.12.1not-accessiblecurrent
hwPWAlarmEntry
OBJECT-TYPE
An entry of the PW alarm relation.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1not-accessiblecurrent
hwPWAlarmIfIndex
OBJECT-TYPE
Interface index of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.1InterfaceIndexnot-accessiblecurrent
hwPWCesVcID
OBJECT-TYPE
Vc ID of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.2Integer32read-onlycurrent
hwPWCesVcType
OBJECT-TYPE
Vc Type of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.3Integer32read-onlycurrent
hwPeerIpAddr
OBJECT-TYPE
Peer IP Address of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.4IpAddressread-onlycurrent
hwAlarmStatus
OBJECT-TYPE
Alarm status of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.5Integer32read-onlyobsolete
hwPWAlarmRMLEnableStatus
OBJECT-TYPE
PW control word RML of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.6EnabledStatusread-writecurrent
hwLosAlarmTriggerThreshold
OBJECT-TYPE
Trigger Threshold of continuous loss packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.7Integer32 (2..65535)read-writecurrent
hwLosAlarmResumeThreshold
OBJECT-TYPE
Resume Threshold of continuous loss packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.8Integer32 (32..65535)read-writecurrent
hwPWPortName
OBJECT-TYPE
PW port name of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.9OCTET STRINGread-onlycurrent
hwLosPktExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of lost packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.10Integer32read-writecurrent
hwLosPktExcResumeThreshold
OBJECT-TYPE
Resume threshold of lost packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.11Integer32read-writecurrent
hwMisorderPktExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of packets lost due to the out-of-order condition of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.12Integer32read-writecurrent
hwMisorderPktExcResumeThreshold
OBJECT-TYPE
Resume threshold of packets lost due to the out-of-order condition of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.13Integer32read-writecurrent
hwStrayPktExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of misconnected packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.14Integer32read-writecurrent
hwStrayPktExcResumeThreshold
OBJECT-TYPE
Resume threshold of misconnected packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.15Integer32read-writecurrent
hwMalPktExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of malformed packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.16Integer32read-writecurrent
hwMalPktExcResumeThreshold
OBJECT-TYPE
Resume threshold of malformed packets of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.17Integer32read-writecurrent
hwJtrUdrExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of jitter buffer underflows of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.18Integer32read-writecurrent
hwJtrUdrExcResumeThreshold
OBJECT-TYPE
Resume threshold of jitter buffer underflows of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.19Integer32read-writecurrent
hwJtrOvrExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of jitter buffer overflows of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.20Integer32read-writecurrent
hwJtrOvrExcResumeThreshold
OBJECT-TYPE
Resume threshold of jitter buffer overflows of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.1.1.21Integer32read-writecurrent
hwAtmPWAlarmTable
OBJECT-TYPE
Indicates the attributes of the ATM PW alarm.
1.3.6.1.4.1.2011.5.25.157.1.12.2not-accessiblecurrent
hwAtmPWAlarmEntry
OBJECT-TYPE
An entry of the ATM PW alarm relation.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1not-accessiblecurrent
hwAtmPWAlarmIfIndex
OBJECT-TYPE
Interface index of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.1InterfaceIndexread-onlycurrent
hwAtmVcID
OBJECT-TYPE
Vc ID of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.2Integer32read-onlycurrent
hwAtmVcType
OBJECT-TYPE
Vc Type of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.3Integer32read-onlycurrent
hwAtmPeerIpAddr
OBJECT-TYPE
Peer IP Address of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.4IpAddressread-onlycurrent
hwAtmPWPortName
OBJECT-TYPE
ATM PW port name of PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.5OCTET STRINGread-onlycurrent
hwAtmLosPktExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of lost packets of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.6Integer32 (1..1000)read-writecurrent
hwAtmLosPktExcResumeThreshold
OBJECT-TYPE
Resume threshold of lost packets of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.7Integer32 (1..1000)read-writecurrent
hwAtmMisorderPktExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of packets lost due to the out-of-order condition of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.8Integer32 (1..1000)read-writecurrent
hwAtmMisorderPktExcResumeThreshold
OBJECT-TYPE
Resume threshold of packets lost due to the out-of-order condition of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.9Integer32 (1..1000)read-writecurrent
hwAtmUnknownCellExcTriggerThreshold
OBJECT-TYPE
Trigger threshold of unknown cell of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.10Integer32 (1..1000)read-writecurrent
hwAtmUnknownCellExcResumeThreshold
OBJECT-TYPE
Resume threshold of unknown cell of ATM PW alarm group.
1.3.6.1.4.1.2011.5.25.157.1.12.2.1.11Integer32 (1..1000)read-writecurrent
hwSNMPTrapEn
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.13
hwSNMPTrapEnTable
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1not-accessiblecurrent
hwSNMPTrapEnEntry
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1not-accessiblecurrent
hwSNMPTrapEnIfIndex
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.1InterfaceIndexnot-accessiblecurrent
hwCesPWLopsEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.2Integer32read-writecurrent
hwCesPWRemoteLosPktEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.3Integer32read-writecurrent
hwCesPWOppositeRAIEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.4Integer32read-writecurrent
hwCesPWOppositeAcfaultEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.5Integer32read-writecurrent
hwCesPWLosPktEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.6Integer32read-writecurrent
hwCesPWMisorderPktEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.7Integer32read-writecurrent
hwCesPWStrayPktEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.8Integer32read-writecurrent
hwCesPWMalPktEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.9Integer32read-writecurrent
hwCesPWJtrUnrEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.10Integer32read-writecurrent
hwCesPWJtrOvrEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.11Integer32read-writecurrent
hwCesPWAllEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.12Integer32read-writecurrent
hwPhysicalPortLosAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.13Integer32read-writecurrent
hwPhysicalPortLofAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.14Integer32read-writecurrent
hwRsOofAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.15Integer32read-writecurrent
hwRsB1ExcAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.16Integer32read-writecurrent
hwRsB1SdAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.17Integer32read-writecurrent
hwRsJ0TimAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.18Integer32read-writecurrent
hwMsRdiAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.19Integer32read-writecurrent
hwMsB2ExcAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.20Integer32read-writecurrent
hwMsAuLopAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.21Integer32read-writecurrent
hwMsAisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.22Integer32read-writecurrent
hwMsB2SdAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.23Integer32read-writecurrent
hwHpJ1TimAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.24Integer32read-writecurrent
hwHpUneqAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.25Integer32read-writecurrent
hwHpRdiAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.26Integer32read-writecurrent
hwHpB3ExcAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.27Integer32read-writecurrent
hwHpPlmAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.28Integer32read-writecurrent
hwHpB3SdAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.29Integer32read-writecurrent
hwHpAuAisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.30Integer32read-writecurrent
hwLpTuLopAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.31Integer32read-writecurrent
hwHpTuLomAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.32Integer32read-writecurrent
hwLpTimAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.33Integer32read-writecurrent
hwLpUneqAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.34Integer32read-writecurrent
hwLpRdiAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.35Integer32read-writecurrent
hwLpBipExcAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.36Integer32read-writecurrent
hwLpBipSdAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.37Integer32read-writecurrent
hwLpPlmAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.38Integer32read-writecurrent
hwLpTuAisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.39Integer32read-writecurrent
hwDs1EsExcAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.40Integer32read-writecurrent
hwDs1RmfaAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.41Integer32read-writecurrent
hwDs1LmfaAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.42Integer32read-writecurrent
hwDs1AisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.43Integer32read-writecurrent
hwDs1RdiAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.44Integer32read-writecurrent
hwRsLocAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.45Integer32read-writecurrent
hwLpRfiAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.46Integer32read-writecurrent
hwLpV5VcaisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.47Integer32read-writecurrent
hwVc12oofAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.48Integer32read-writecurrent
hwVc12AlmE1RaiAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.49Integer32read-writecurrent
hwVc12LfaAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.50Integer32read-writecurrent
hwVc12UpE1AisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.51Integer32read-writecurrent
hwVc12DownE1AisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.52Integer32read-writecurrent
hwDs1DownE1AisAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.53Integer32read-writecurrent
hwMsLpsUniBiMAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.54Integer32read-writecurrent
hwMsK1K2MAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.55Integer32read-writecurrent
hwMsK2MAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.56Integer32read-writecurrent
hwVc12LmfaAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.57Integer32read-writecurrent
hwSDHAllEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.58Integer32read-writecurrent
hwLaserShutAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.59Integer32read-writecurrent
hwLaserAutoShutAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.60Integer32read-writecurrent
hwLaserAllEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.61Integer32read-writecurrent
hwLoopbackAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.62Integer32read-writecurrent
hwChannelLoopbackAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.63Integer32read-writecurrent
hwLoopbackAllEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.64Integer32read-writecurrent
hwAtmOcdAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.65Integer32read-writecurrent
hwAtmLcdAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.66Integer32read-writecurrent
hwAtmUhcsAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.67Integer32read-writecurrent
hwAtmChcsAlarmEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.68Integer32read-writecurrent
hwAtmPWLosPktEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.69Integer32read-writecurrent
hwAtmPWMisorderPktEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.70Integer32read-writecurrent
hwAtmPWUnknownCellEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.71Integer32read-writecurrent
hwAtmAllEn
OBJECT-TYPE
Reserved nodes do not support this function temporarily.
1.3.6.1.4.1.2011.5.25.157.1.13.1.1.72Integer32read-writecurrent
hwPortAlarmThreshold
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.14
hwPortAlarmThresholdTable
OBJECT-TYPE
Indicates the port alarm threshold. This table lists the port alarm threshold of various interfaces.
1.3.6.1.4.1.2011.5.25.157.1.14.1not-accessiblecurrent
hwPortAlarmThresholdEntry
OBJECT-TYPE
Indicates the port alarm threshold. This table lists the threshold of various port alarm.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1not-accessiblecurrent
hwPhysicalPortThrIfIndex
OBJECT-TYPE
Interface index(es) of physical port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1InterfaceIndexaccessible-for-notifycurrent
hwPhysicalPortThrName
OBJECT-TYPE
Interface name of physical port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2OCTET STRING (SIZE(0..64))read-onlycurrent
hwPhysicalPortCrcErrorStatistics
OBJECT-TYPE
Crc error statistics value.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.3Counter64read-onlycurrent
hwPhysicalPortCrcErrorHighThreshold
OBJECT-TYPE
Crc error alarm high threshold,default value is 1000.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.4Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortCrcErrorLowThreshold
OBJECT-TYPE
Crc error alarm low threshold,default value is 100.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.5Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortCrcErrorInterval
OBJECT-TYPE
Crc error alarm interval time(unit is second),default value is 10s.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.6Unsigned32 (1..65535)read-writecurrent
hwPhysicalPortSymbolErrorStatistics
OBJECT-TYPE
Symbol error statistics value.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.7Counter64read-onlycurrent
hwPhysicalPortSymbolErrorHighThreshold
OBJECT-TYPE
Symbol error alarm high threshold,default value is 1000.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.8Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortSymbolErrorLowThreshold
OBJECT-TYPE
Symbol error alarm low threshold,default value is 100.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.9Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortSymbolErrorInterval
OBJECT-TYPE
Symbol error alarm interval time(unit is second),default value is 10s.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.10Unsigned32 (1..65535)read-writecurrent
hwPhysicalPortInputErrorStatistics
OBJECT-TYPE
Input error statistics value.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.11Counter64read-onlycurrent
hwPhysicalPortInputErrorHighThreshold
OBJECT-TYPE
Input error alarm high threshold,default value is 1000.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.12Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortInputErrorLowThreshold
OBJECT-TYPE
Input error alarm low threshold,default value is 100.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.13Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortInputErrorInterval
OBJECT-TYPE
Input error alarm interval time(unit is second),default value is 10s.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.14Unsigned32 (1..65535)read-writecurrent
hwPhysicalPortOutputErrorStatistics
OBJECT-TYPE
Output error statistics value.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.15Counter64read-onlycurrent
hwPhysicalPortOutputErrorHighThreshold
OBJECT-TYPE
Output error alarm high threshold,default value is 1000.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.16Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortOutputErrorLowThreshold
OBJECT-TYPE
Output error alarm low threshold,default value is 100.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.17Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortOutputErrorInterval
OBJECT-TYPE
Output error alarm interval time(unit is second),default value is 10s.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.18Unsigned32 (1..65535)read-writecurrent
hwPhysicalPortSdhErrorStatistics
OBJECT-TYPE
Sdh error statistics value.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.19Counter64read-onlycurrent
hwPhysicalPortSdhErrorHighThreshold
OBJECT-TYPE
Sdh error alarm high threshold,default value is 1000.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.20Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortSdhErrorLowThreshold
OBJECT-TYPE
Sdh error alarm low threshold,default value is 100.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.21Unsigned32 (0..4294967295)read-writecurrent
hwPhysicalPortSdhErrorInterval
OBJECT-TYPE
Sdh error alarm interval time(unit is second),default value is 10s.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.22Unsigned32 (1..65535)read-writecurrent
hwPhysicalPortBIP8SDErrorThreshold
OBJECT-TYPE
BIP8-SD error alarm threshold,default value is 6.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.23Unsigned32 (6..9)read-writecurrent
hwPhysicalPortCrcPerAlarmThresholdCoefficient
OBJECT-TYPE
The coefficient value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.24Unsigned32read-writecurrent
hwPhysicalPortCrcPerAlarmThresholdPower
OBJECT-TYPE
The power value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 7.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.25Unsigned32read-writecurrent
hwPhysicalPortCrcPerResumeThresholdCoefficient
OBJECT-TYPE
The coefficient value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.26Unsigned32read-writecurrent
hwPhysicalPortCrcPerResumeThresholdPower
OBJECT-TYPE
The power value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 7.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.27Unsigned32read-writecurrent
hwPhysicalPortCrcPerTriggerLsp
OBJECT-TYPE
Enable or disable the CRC-PER(Packet Error Ratio) result in switchover. The range is 0 to 2. The value 0 means switchover is disabled; 1 means only the lsp switchover is enabled; 2 means only the section switchover is enabled.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.28Unsigned32read-writecurrent
hwPhysicalPortCrcPerCurrentValueString
OBJECT-TYPE
The current value of CRC-PER(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.29OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcPerAlarmThresholdString
OBJECT-TYPE
The alarm threshold of CRC-PER(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.30OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcPerResumeThresholdString
OBJECT-TYPE
The resume threshold of CRC-PER(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.31OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcPerTriggerSection
OBJECT-TYPE
The trigger section of CRC-PER(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.32Unsigned32read-writecurrent
hwPhysicalPortAlarmTypeThresholdCoefficient
OBJECT-TYPE
The value 0 means high-low packet error is enabled; 1 means CRC-PER(Packet Error Ratio) is enabled; 2 means CRC-BER(Bit Error Ratio) is enabled.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.33INTEGER {packeterror(0), packeterrorratio(1), biterrorratio(2)}read-writecurrent
hwPhysicalPortCrcSdAlarmThresholdCoefficient
OBJECT-TYPE
The coefficient value of MAC_FCS_SD alarm threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.34Unsigned32read-writecurrent
hwPhysicalPortCrcSdAlarmThresholdPower
OBJECT-TYPE
The power value of MAC_FCS_SD alarm threshold. The range is 5 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.35Unsigned32read-writecurrent
hwPhysicalPortCrcSdResumeThresholdCoefficient
OBJECT-TYPE
The coefficient value of MAC_FCS_SD resume threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.36Unsigned32read-writecurrent
hwPhysicalPortCrcSdResumeThresholdPower
OBJECT-TYPE
The power value of MAC_FCS_SD resume threshold. The range is 5 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.37Unsigned32read-writecurrent
hwPhysicalPortCrcExcAlarmThresholdCoefficient
OBJECT-TYPE
The coefficient value of MAC_FCS_EXC alarm threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.38Unsigned32read-writecurrent
hwPhysicalPortCrcExcAlarmThresholdPower
OBJECT-TYPE
The power value of MAC_FCS_EXC alarm threshold. The range is 2 to 5.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.39Unsigned32read-writecurrent
hwPhysicalPortCrcExcResumeThresholdCoefficient
OBJECT-TYPE
The coefficient value of MAC_FCS_EXC resume threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.40Unsigned32read-writecurrent
hwPhysicalPortCrcExcResumeThresholdPower
OBJECT-TYPE
The power value of MAC_FCS_EXC resume threshold. The range is 2 to 5.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.41Unsigned32read-writecurrent
hwPhysicalPortCrcSdAlarmThresholdString
OBJECT-TYPE
The alarm threshold of MAC_FCS_SD.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.42OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcSdResumeThresholdString
OBJECT-TYPE
The resume threshold of MAC_FCS_SD.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.43OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcExcAlarmThresholdString
OBJECT-TYPE
The alarm threshold of MAC_FCS_EXC.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.44OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcExcResumeThresholdString
OBJECT-TYPE
The resume threshold of MAC_FCS_EXC.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.45OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcPerAlarmCoefficientStatistics
OBJECT-TYPE
The coefficient value of CRC-PER(Packet Error Ratio) alarm statistics.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.46Unsigned32read-onlycurrent
hwPhysicalPortCrcPerAlarmPowerStatistics
OBJECT-TYPE
The power value of CRC-PER(Packet Error Ratio) alarm statistics.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.47Unsigned32read-onlycurrent
hwPhysicalPortCrcSdAlarmTriggerLsp
OBJECT-TYPE
Enable or disable the SD alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.48INTEGER {notsupport(-1), enable(1), disable(2)}read-writecurrent
hwPhysicalPortCrcExcAlarmTriggerLsp
OBJECT-TYPE
Enable or disable the EXC alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.49INTEGER {notsupport(-1), enable(1), disable(2)}read-writecurrent
hwPhysicalPortCrcPerWarningThresholdCoefficient
OBJECT-TYPE
The coefficient value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.50Unsigned32read-writecurrent
hwPhysicalPortCrcPerWarningThresholdPower
OBJECT-TYPE
The power value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 7.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.51Unsigned32read-writecurrent
hwPhysicalPortCrcPerWarningResumeThresholdCoefficient
OBJECT-TYPE
The coefficient value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 9.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.52Unsigned32read-writecurrent
hwPhysicalPortCrcPerWarningResumeThresholdPower
OBJECT-TYPE
The power value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 7.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.53Unsigned32read-writecurrent
hwPhysicalPortCrcPerWarningThresholdString
OBJECT-TYPE
The warning threshold of CRC-PER(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.54OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortCrcPerWarningResumeThresholdString
OBJECT-TYPE
The warning resume threshold of CRC-PER(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.55OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortPreFecCoefficientStatistics
OBJECT-TYPE
The coefficient value of PRE-FEC bit-error-ratio statistics.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.56Unsigned32read-onlycurrent
hwPhysicalPortPreFecPowerStatistics
OBJECT-TYPE
The power value of PRE-FEC bit-error-ratio statistics.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.57Unsigned32read-onlycurrent
hwPhysicalPortErrorPerCurrentValueString
OBJECT-TYPE
The current value of error packets per second(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.58OCTET STRINGaccessible-for-notifycurrent
hwPhysicalPortErrorPerAlarmThresholdString
OBJECT-TYPE
The warning threshold of error packets per second(Packet Error Ratio).
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.59OCTET STRINGaccessible-for-notifycurrent
hwInputBroadcastChangeThreshold
OBJECT-TYPE
input broadcast rate Threshold.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.60Unsigned32read-onlycurrent
hwCurrentStatisticalInputBroadcast
OBJECT-TYPE
current statistics of input broadcast.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.61Counter64read-onlycurrent
hwBaseStatisticalInputBroadcast
OBJECT-TYPE
base statistics of input broadcast.
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.62Counter64read-onlycurrent
hwPortAlarmDownEnable
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.15
hwPortAlarmDownEnableTable
OBJECT-TYPE
Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm.
1.3.6.1.4.1.2011.5.25.157.1.15.1not-accessiblecurrent
hwPortAlarmDownEnableEntry
OBJECT-TYPE
Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1not-accessiblecurrent
hwPhysicalPortDownIfIndex
OBJECT-TYPE
Interface index(es) of physical port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.1InterfaceIndexnot-accessiblecurrent
hwPhysicalPortDownName
OBJECT-TYPE
Interface name of physical port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.2OCTET STRING (SIZE(0..64))read-onlycurrent
hwPhysicalPortCrcEnabledDown
OBJECT-TYPE
Enalbe or disable the crc error alarm result in physics down, and the default value is disable.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.3INTEGER {disable(0), enable(1)}read-writecurrent
hwPhysicalPortSymbolEnabledDown
OBJECT-TYPE
Enalbe or disable the symbol error alarm result in physics down, and the default value is disable.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.4INTEGER {disable(0), enable(1)}read-writecurrent
hwPhysicalPortInputEnabledDown
OBJECT-TYPE
Enalbe or disable the input error alarm result in physics down, and the default value is disable.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.5INTEGER {disable(0), enable(1)}read-writecurrent
hwPhysicalPortOutputEnabledDown
OBJECT-TYPE
Enalbe or disable the output error alarm result in physics down, and the default value is disable.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.6INTEGER {disable(0), enable(1)}read-writecurrent
hwPhysicalPortSdhEnabledDown
OBJECT-TYPE
Enalbe or disable the sdh error alarm result in physics down, and the default value is disable.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.7INTEGER {disable(0), enable(1)}read-writecurrent
hwPhysicalPortBip8SdEnabledDown
OBJECT-TYPE
Enalbe or disable the BIP8-SD error alarm result in physics down, and the default value is disable.
1.3.6.1.4.1.2011.5.25.157.1.15.1.1.8INTEGER {disable(0), enable(1)}read-writecurrent
hwPortProtectGroupCfg
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.16
hwPortProtectGroupCfgTable
OBJECT-TYPE
The table includes the information of the port protect group configuration information, and include the port group, working status of port etc.
1.3.6.1.4.1.2011.5.25.157.1.16.1not-accessiblecurrent
hwPortProtectGroupCfgEntry
OBJECT-TYPE
The table includes the information of the port protect group configuration information. The index of the table is hwPortProtectGroupId.
1.3.6.1.4.1.2011.5.25.157.1.16.1.1not-accessiblecurrent
hwPortProtectGroupId
OBJECT-TYPE
Port protect group index.
1.3.6.1.4.1.2011.5.25.157.1.16.1.1.1Integer32 (0..127)read-onlycurrent
hwPortProtectMasterIfIndex
OBJECT-TYPE
The master interface index of port protect group.
1.3.6.1.4.1.2011.5.25.157.1.16.1.1.2Integer32read-createcurrent
hwPortProtectMasterStatus
OBJECT-TYPE
Working status of master port , include work, protect, down. work: the port in group is active. protect: master port is protect port. down: master port is inactive.
1.3.6.1.4.1.2011.5.25.157.1.16.1.1.3INTEGER {work(1), protect(2), down(3)}read-onlycurrent
hwPortProtectSlaveIfIndex
OBJECT-TYPE
The slave interface index of port protect group.
1.3.6.1.4.1.2011.5.25.157.1.16.1.1.4Integer32read-createcurrent
hwPortProtectSlaveStatus
OBJECT-TYPE
Working status of slave port , include work, protect, down. work: the port in group is active. protect: slave port is protect port. down: slave port is inactive.
1.3.6.1.4.1.2011.5.25.157.1.16.1.1.5INTEGER {work(1), protect(2), down(3)}read-onlycurrent
hwPortProtectRowStatus
OBJECT-TYPE
Status of port protect group row.
1.3.6.1.4.1.2011.5.25.157.1.16.1.1.6RowStatusread-createcurrent
hwPortLine
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.17
hwPortLineTable
OBJECT-TYPE
Indicates the link attributes of the interface. This table lists the link attributes of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1not-accessiblecurrent
hwPortLineEntry
OBJECT-TYPE
Indicates the link attributes of the interface. This table lists the link attributes of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1not-accessiblecurrent
hwPortLineIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.1InterfaceIndexnot-accessiblecurrent
hwPortLineUpStreampbo
OBJECT-TYPE
Indicates the upstream power back-off of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.2Integer32read-onlycurrent
hwPortLineDownStreampbo
OBJECT-TYPE
Indicates the downstream power back-off of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.3Integer32read-onlycurrent
hwPortLineUpStreamLoopAtten
OBJECT-TYPE
Indicates the upstream loopback attenuation of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.4Integer32read-onlycurrent
hwPortLineDownStreamLoopAtten
OBJECT-TYPE
Indicates the downstream loopback attenuation of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.5Integer32read-onlycurrent
hwPortLineUpStreamSnrMargin
OBJECT-TYPE
Indicates the upstream SNR margin of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.6Integer32read-onlycurrent
hwPortLineDownStreamSnrMargin
OBJECT-TYPE
Indicates the downstream SNR margin of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.7Integer32read-onlycurrent
hwPortLineSpeed
OBJECT-TYPE
Indicates the negotiated rate of the interface.
1.3.6.1.4.1.2011.5.25.157.1.17.1.1.8Integer32read-onlycurrent
hwPortIfStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.18
hwPortIfStatTable
OBJECT-TYPE
This table lists the number of packets of the interface.
1.3.6.1.4.1.2011.5.25.157.1.18.1not-accessiblecurrent
hwPortIfStatEntry
OBJECT-TYPE
This table lists the number of packets of the interface.
1.3.6.1.4.1.2011.5.25.157.1.18.1.1not-accessiblecurrent
hwPortIfStatIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.18.1.1.1InterfaceIndexnot-accessiblecurrent
hwPortIfStatIfInCrcPkts
OBJECT-TYPE
Indicates the number of packets which the CRC operates.
1.3.6.1.4.1.2011.5.25.157.1.18.1.1.2Integer32read-onlycurrent
hwIPIfStatTable
OBJECT-TYPE
This table lists the number of ip packets of the interface.
1.3.6.1.4.1.2011.5.25.157.1.18.2not-accessiblecurrent
hwIPIfStatEntry
OBJECT-TYPE
This table lists the number of ip packets of the interface.
1.3.6.1.4.1.2011.5.25.157.1.18.2.1not-accessiblecurrent
hwIpIfStatsIPVersion
OBJECT-TYPE
The version of packets protocol.
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.1INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
hwIpIfStatsIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.2Integer32not-accessiblecurrent
hwIpIfInOctetRate
OBJECT-TYPE
The ip rate of octets received on the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.3Counter64read-onlycurrent
hwIpIfInPktRate
OBJECT-TYPE
The ip rate of packets received on the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.4Counter64read-onlycurrent
hwIpIfOutOctetRate
OBJECT-TYPE
The ip rate of octets transmitted out of the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.5Counter64read-onlycurrent
hwIpIfOutPktRate
OBJECT-TYPE
The ip rate of packets transmitted out of the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.6Counter64read-onlycurrent
hwIpIfInOctets
OBJECT-TYPE
The ip octets received on the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.7Counter64read-onlycurrent
hwIpIfInPkts
OBJECT-TYPE
The ip packets received on the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.8Counter64read-onlycurrent
hwIpIfOutOctets
OBJECT-TYPE
The ip octets transmitted out of the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.9Counter64read-onlycurrent
hwIpIfOutPkts
OBJECT-TYPE
The ip packets transmitted out of the interface .
1.3.6.1.4.1.2011.5.25.157.1.18.2.1.10Counter64read-onlycurrent
hwPortDescription
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.19
hwPortDescriptionTable
OBJECT-TYPE
This table lists the description of interfaces.
1.3.6.1.4.1.2011.5.25.157.1.19.1not-accessiblecurrent
hwPortDescriptionEntry
OBJECT-TYPE
This table lists the description of interfaces.
1.3.6.1.4.1.2011.5.25.157.1.19.1.1not-accessiblecurrent
hwPortDescriptionIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.19.1.1.1Integer32read-onlycurrent
hwPortDescriptionIfPortDescription
OBJECT-TYPE
Indicates the description of ports.
1.3.6.1.4.1.2011.5.25.157.1.19.1.1.2INTEGER {router(1), switch(2), phone(3), desktop(4), null(5)}read-writecurrent
hwPRBSTestInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.20
hwPRBSTestPortStatusTable
OBJECT-TYPE
This table lists the capability and result of PRBS test.
1.3.6.1.4.1.2011.5.25.157.1.20.1not-accessiblecurrent
hwPRBSTestPortStatusEntry
OBJECT-TYPE
This table lists the capability and result of PRBS test.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1not-accessiblecurrent
hwPRBSTestPortStatusIfName
OBJECT-TYPE
Interface name of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.1OCTET STRING (SIZE(0..64))read-onlycurrent
hwPRBSTestPortStatusSide
OBJECT-TYPE
Indicate PRBS test side.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.2INTEGER {nni(0), uni(1)}read-onlycurrent
hwPRBSTestPortStatusSuportFlag
OBJECT-TYPE
Whether PRBS test supported.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.3INTEGER {notsupportinter(0), unframedandsupport(1), unframedandnotsupport(2), fractionalandsupport(3), fractionalandnotsupport(4)}read-onlycurrent
hwPRBSTestPortStatusPatternBitmap
OBJECT-TYPE
Indicate supported PRBS pattern by bitmap. bit 0 - 3 : PRBS15, PRBS20, PRBS23, QRSS, bit 4 - 7 : 0S, 1S, ALT-0-1, 1IN8, bit 8 - 11 : 3IN24, PRBS6, PRBS9, PRBS11, bit 12 : QRW
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.4Unsigned32read-onlycurrent
hwPRBSTestPortStatusErrInsertLevel
OBJECT-TYPE
Indicate the supported err-insert level. It's described by bitmap. From low to high, the different bit position indicates whether or not support 1, 1e-1, 1e-2, 1e-3, etc. e.g. 0x1FC (0b111111100): Range from 1e-2 to 1e-8 supported. 0xA (0b1010) : Only 1e-1 and 1e-3 supported.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.5Unsigned32read-onlycurrent
hwPRBSTestPortStatusSlotNum
OBJECT-TYPE
Slot ID of the testing phyicial port.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.6Unsigned32read-onlycurrent
hwPRBSTestPortStatusCardNum
OBJECT-TYPE
Card ID of the testing phyicial port.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.7Unsigned32read-onlycurrent
hwPRBSTestPortStatusPhyPortIfName
OBJECT-TYPE
Interface Name of the testing phyicial port.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.8OCTET STRING (SIZE(0..64))read-onlycurrent
hwPRBSTestPortStatusResultCount
OBJECT-TYPE
Total count of PRBS test history result.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.9Unsigned32read-onlycurrent
hwPRBSTestPortStatusOngoingTestIndex
OBJECT-TYPE
Indicate the ongoing PRBS testing index of current interface.
1.3.6.1.4.1.2011.5.25.157.1.20.1.1.10Unsigned32read-onlycurrent
hwPRBSTestResultTable
OBJECT-TYPE
This table lists PRBS test result info.
1.3.6.1.4.1.2011.5.25.157.1.20.2not-accessiblecurrent
hwPRBSTestResultEntry
OBJECT-TYPE
This table lists PRBS test result info.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1not-accessiblecurrent
hwPRBSTestResultIfName
OBJECT-TYPE
Interface name of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.1OCTET STRING (SIZE(0..64))read-onlycurrent
hwPRBSTestResultTestIndex
OBJECT-TYPE
Indicate the PRBS test hisotry test index. 0 is invalid.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.2Unsigned32read-onlycurrent
hwPRBSTestResultPhyPortIfName
OBJECT-TYPE
Interface Name of the testing phyicial port.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.3OCTET STRING (SIZE(0..64))read-onlycurrent
hwPRBSTestResultSide
OBJECT-TYPE
Indicate PRBS test side.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.4INTEGER {nni(0), uni(1)}read-onlycurrent
hwPRBSTestResultPattern
OBJECT-TYPE
Indicate PRBS pattern. Refer to hwPRBSTestPortStatusPatternBitmap, but single bit here.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.5Unsigned32read-onlycurrent
hwPRBSTestResultIntervalTime
OBJECT-TYPE
Period time of each interval, in second.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.6Unsigned32read-onlycurrent
hwPRBSTestResultIntervalCount
OBJECT-TYPE
PRBS test interval repeat count.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.7Unsigned32read-onlycurrent
hwPRBSTestResultTestingIntervalIndex
OBJECT-TYPE
Indicate the ongoing testing interval index.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.8Unsigned32read-onlycurrent
hwPRBSTestResultStartTime
OBJECT-TYPE
Start time of the test.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.9DateAndTimeread-onlycurrent
hwPRBSTestResultStopTime
OBJECT-TYPE
Stop time of the test.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.10DateAndTimeread-onlycurrent
hwPRBSTestResultProgress
OBJECT-TYPE
Prgress of the test. 100 means 100%.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.11Unsigned32read-onlycurrent
hwPRBSTestResultRemainTime
OBJECT-TYPE
Remaining time of the test, in second.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.12Unsigned32read-onlycurrent
hwPRBSTestResultErrInserted
OBJECT-TYPE
Whether error-bit inserted of the test
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.13INTEGER {yes(0), no(1)}read-onlycurrent
hwPRBSTestResultTotalBit
OBJECT-TYPE
Total-bit of the test.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.14Counter64read-onlycurrent
hwPRBSTestResultErrorBit
OBJECT-TYPE
Error-bit of the test.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.15Counter64read-onlycurrent
hwPRBSTestResultBerCoe
OBJECT-TYPE
The coefficient value of bit-error-ratio.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.16Unsigned32read-onlycurrent
hwPRBSTestResultBerPow
OBJECT-TYPE
The power value of bit-error-ratio.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.17Unsigned32read-onlycurrent
hwPRBSTestResultLos
OBJECT-TYPE
Loss of sync second.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.18Unsigned32read-onlycurrent
hwPRBSTestResultEs
OBJECT-TYPE
Error second.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.19Unsigned32read-onlycurrent
hwPRBSTestResultEfs
OBJECT-TYPE
Error free second.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.20Unsigned32read-onlycurrent
hwPRBSTestResultSes
OBJECT-TYPE
Severely error second, comparing with 1E-3.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.21Unsigned32read-onlycurrent
hwPRBSTestResultUas
OBJECT-TYPE
Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.22Unsigned32read-onlycurrent
hwPRBSTestResultSegmentTime
OBJECT-TYPE
Period time of each segment, in second.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.23Unsigned32read-onlycurrent
hwPRBSTestResultSegmentTotalCount
OBJECT-TYPE
Segment count of the whole PRBS test.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.24Unsigned32read-onlycurrent
hwPRBSTestResultTestingSegmentIndex
OBJECT-TYPE
Indicate the ongoing testing segment index.
1.3.6.1.4.1.2011.5.25.157.1.20.2.1.25Unsigned32read-onlycurrent
hwPRBSTestIntervalTable
OBJECT-TYPE
This table lists PRBS test interval info.
1.3.6.1.4.1.2011.5.25.157.1.20.3not-accessiblecurrent
hwPRBSTestIntervalEntry
OBJECT-TYPE
This table lists PRBS test interval info.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1not-accessiblecurrent
hwPRBSTestIntervalIfName
OBJECT-TYPE
Interface name of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.1OCTET STRING (SIZE(0..64))read-onlycurrent
hwPRBSTestIntervalTestIndex
OBJECT-TYPE
Indicate the PRBS test hisotry test index. 0 is invalid.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.2Unsigned32read-onlycurrent
hwPRBSTestIntervalIndex
OBJECT-TYPE
Indicate the interval index of a test. 0 is invalid.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.3Unsigned32 (0..60)read-onlycurrent
hwPRBSTestIntervalStartTime
OBJECT-TYPE
Start time of the interval.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.4DateAndTimeread-onlycurrent
hwPRBSTestIntervalStopTime
OBJECT-TYPE
Stop time of the interval
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.5DateAndTimeread-onlycurrent
hwPRBSTestIntervalProgress
OBJECT-TYPE
Prgress of the interval. 100 means 100%.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.6Unsigned32read-onlycurrent
hwPRBSTestIntervalRemainTime
OBJECT-TYPE
Remaining time of the interval, in second.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.7Unsigned32read-onlycurrent
hwPRBSTestIntervalErrInserted
OBJECT-TYPE
Whether error-bit inserted of the interval
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.8INTEGER {yes(0), no(1)}read-onlycurrent
hwPRBSTestIntervalTotalBit
OBJECT-TYPE
Total-bit of the interval.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.9Counter64read-onlycurrent
hwPRBSTestIntervalErrorBit
OBJECT-TYPE
Error-bit of the interval.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.10Counter64read-onlycurrent
hwPRBSTestIntervalBerCoe
OBJECT-TYPE
The coefficient value of bit-error-ratio.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.11Unsigned32read-onlycurrent
hwPRBSTestIntervalBerPow
OBJECT-TYPE
The power value of bit-error-ratio.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.12Unsigned32read-onlycurrent
hwPRBSTestIntervalLos
OBJECT-TYPE
Loss of sync second.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.13Unsigned32read-onlycurrent
hwPRBSTestIntervalEs
OBJECT-TYPE
Error second.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.14Unsigned32read-onlycurrent
hwPRBSTestIntervalEfs
OBJECT-TYPE
Error free second.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.15Unsigned32read-onlycurrent
hwPRBSTestIntervalSes
OBJECT-TYPE
Severely error second, comparing with 1E-3.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.16Unsigned32read-onlycurrent
hwPRBSTestIntervalUas
OBJECT-TYPE
Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.
1.3.6.1.4.1.2011.5.25.157.1.20.3.1.17Unsigned32read-onlycurrent
hwPRBSTestSegmentTable
OBJECT-TYPE
This table lists PRBS test segment info.
1.3.6.1.4.1.2011.5.25.157.1.20.4not-accessiblecurrent
hwPRBSTestSegmentEntry
OBJECT-TYPE
This table lists PRBS test segment info.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1not-accessiblecurrent
hwPRBSTestSegmentIfName
OBJECT-TYPE
Interface name of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.1OCTET STRING (SIZE(0..64))read-onlycurrent
hwPRBSTestSegmentTestIndex
OBJECT-TYPE
Indicate the PRBS test index. 0 is invalid.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.2Unsigned32read-onlycurrent
hwPRBSTestSegmentIndex
OBJECT-TYPE
Indicate the segment index of a test. 0 is invalid.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.3Unsigned32 (0..864000)read-onlycurrent
hwPRBSTestSegmentStartTime
OBJECT-TYPE
Start time of the interval.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.4DateAndTimeread-onlycurrent
hwPRBSTestSegmentEndTime
OBJECT-TYPE
Stop time of the interval
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.5DateAndTimeread-onlycurrent
hwPRBSTestSegmentTotalBit
OBJECT-TYPE
Total-bit of the segment.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.6Counter64read-onlycurrent
hwPRBSTestSegmentErrorBit
OBJECT-TYPE
Error-bit of the segment.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.7Counter64read-onlycurrent
hwPRBSTestSegmentBerCoe
OBJECT-TYPE
The coefficient value of bit-error-ratio.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.8Unsigned32read-onlycurrent
hwPRBSTestSegmentBerPow
OBJECT-TYPE
The power value of bit-error-ratio.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.9Unsigned32read-onlycurrent
hwPRBSTestSegmentLos
OBJECT-TYPE
Loss of sync second.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.10Unsigned32read-onlycurrent
hwPRBSTestSegmentEs
OBJECT-TYPE
Error second.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.11Unsigned32read-onlycurrent
hwPRBSTestSegmentEfs
OBJECT-TYPE
Error free second.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.12Unsigned32read-onlycurrent
hwPRBSTestSegmentSes
OBJECT-TYPE
Severely error second, comparing with 1E-3.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.13Unsigned32read-onlycurrent
hwPRBSTestSegmentUas
OBJECT-TYPE
Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.
1.3.6.1.4.1.2011.5.25.157.1.20.4.1.14Unsigned32read-onlycurrent
hwOtn
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.21
hwOtnTable
OBJECT-TYPE
Indicates the otn attributes of the WDM interface.
1.3.6.1.4.1.2011.5.25.157.1.21.1not-accessiblecurrent
hwOtnEntry
OBJECT-TYPE
This table lists the otn attributes of the WDM interface.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1not-accessiblecurrent
hwOtnIfIndex
OBJECT-TYPE
Interface index(es) of port(s) present on the device.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.1InterfaceIndexnot-accessiblecurrent
hwOtnFecMode
OBJECT-TYPE
Indicates the Fec mode of the WDM interface. By default, the Fec mode is standard.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.2INTEGER {none(0), standard(1), enhanced(2), enhancedI7(3), enhancedI4(4)}read-writecurrent
hwOtnFec0bitStatistics
OBJECT-TYPE
The value of FEC 0 bit statistics.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.3Counter64read-onlycurrent
hwOtnFec1bitStatistics
OBJECT-TYPE
The value of FEC 1 bit statistics.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.4Counter64read-onlycurrent
hwOtnFec0And1TypeStatistics
OBJECT-TYPE
The value of FEC 0 and 1 type statistics.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.5Counter64read-onlycurrent
hwOtnFecSymbolErrStatistics
OBJECT-TYPE
The value of FEC symbol error statistics.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.6Counter64read-onlycurrent
hwOtnFecUncorrectErrStatistics
OBJECT-TYPE
The value of FEC uncorrect error statistics.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.7Counter64read-onlycurrent
hwOtnPreFecBERCoefficient
OBJECT-TYPE
The coefficient value of Pre-FEC BER.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.8Unsigned32read-onlycurrent
hwOtnPreFecBERPower
OBJECT-TYPE
The power value of Pre-FEC BER.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.9Unsigned32read-onlycurrent
hwOtnAfterFecBERCoefficient
OBJECT-TYPE
The coefficient value of After-FEC BER.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.10Unsigned32read-onlycurrent
hwOtnAfterFecBERPower
OBJECT-TYPE
The power value of After-FEC BER.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.11Unsigned32read-onlycurrent
hwOtnOSNR
OBJECT-TYPE
The value of optical signal-to-noise ratio.
1.3.6.1.4.1.2011.5.25.157.1.21.1.1.14Integer32read-onlycurrent
hwLogicalPort
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.22
hwLogicalPortTable
OBJECT-TYPE
This table lists the working status of the logical ports.
1.3.6.1.4.1.2011.5.25.157.1.22.1not-accessiblecurrent
hwLogicalPortEntry
OBJECT-TYPE
This table lists the working status of the logical ports.
1.3.6.1.4.1.2011.5.25.157.1.22.1.1not-accessiblecurrent
hwLogicalPortIfIndex
OBJECT-TYPE
Interface index(es) of the logical port(s) present on the device .
1.3.6.1.4.1.2011.5.25.157.1.22.1.1.1InterfaceIndexread-onlycurrent
hwLogicalPortStatisticEnable
OBJECT-TYPE
Indicates the statistic enable status of the logical port(s) .
1.3.6.1.4.1.2011.5.25.157.1.22.1.1.2INTEGER {neither(1), inbound(2), outbound(3), both(4)}read-writecurrent
hwNarrowBand
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.23
hwEmTable
OBJECT-TYPE
This table lists the attributes of all E&M interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.1not-accessiblecurrent
hwEmEntry
OBJECT-TYPE
This table lists the attributes of all E&M interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.1.1not-accessiblecurrent
hwEmIfIndex
OBJECT-TYPE
The value of this object identifies the index of an E&M interface.
1.3.6.1.4.1.2011.5.25.157.1.23.1.1.1InterfaceIndexnot-accessiblecurrent
hwEmPcmMode
OBJECT-TYPE
This object indicates the PCM mode of an E&M interface. The value can be A-Law or U-Law. The default value is A-Law.
1.3.6.1.4.1.2011.5.25.157.1.23.1.1.2INTEGER {aLaw(1), uLaw(2)}read-writecurrent
hwEmSignalMode
OBJECT-TYPE
This object indicates the signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5.
1.3.6.1.4.1.2011.5.25.157.1.23.1.1.3INTEGER {bell1(1), bell2(2), bell3(3), bell4(4), bell5(5)}read-writecurrent
hwEmReceiveGain
OBJECT-TYPE
This object indicates the receive gain of an E&M interface. The value ranges from -20 to 1.5 with a step of 0.5, in dB. The default value is 0 dB.
1.3.6.1.4.1.2011.5.25.157.1.23.1.1.4OCTET STRINGread-writecurrent
hwEmSendGain
OBJECT-TYPE
This object indicates the transmit gain of an E&M interface. The value ranges from -7 to 13.5 with a step of 0.5, in dB. The default value is 0 dB.
1.3.6.1.4.1.2011.5.25.157.1.23.1.1.5OCTET STRINGread-writecurrent
hwEmUserLine
OBJECT-TYPE
This object indicates the user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire.
1.3.6.1.4.1.2011.5.25.157.1.23.1.1.6INTEGER {twoWire(1), fourWire(2)}read-writecurrent
hwFxsoTable
OBJECT-TYPE
This table lists the attributes of all FXS/FXO interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.2not-accessiblecurrent
hwFxsoEntry
OBJECT-TYPE
This table lists the attributes of all FXS/FXO interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1not-accessiblecurrent
hwFxsoIfIndex
OBJECT-TYPE
The value of this object identifies the index of an FXS/FXO.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.1InterfaceIndexnot-accessiblecurrent
hwFxsoPortMode
OBJECT-TYPE
This object indicates the type of an FXS/FXO interface. For AND1MPAA PICs, the last four ports (ports 6, 7, 8, and 9) can work either in fxo or fxs mode. The default mode is fxo.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.2INTEGER {fxs(7), fxo(8)}read-writecurrent
hwFxsoPcmMode
OBJECT-TYPE
This object indicates the PCM mode of an FXS/FXO interface. The value can be A-Law or U-Law. The default value is A-Law.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.3INTEGER {aLaw(1), uLaw(2)}read-writecurrent
hwFxsCurrent
OBJECT-TYPE
This object indicates the current of an FXS interface. The value can be 16mA or 20mA. The default value is 16mA.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.4INTEGER {mA16(1), mA20(2)}read-writecurrent
hwFxsImpedance
OBJECT-TYPE
This object indicates the impedance of an FXS interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 120 nF) and 220 ohm + (820 ohm || 115 nF) value 4: 370 ohm + (620 ohm || 310 nF) value 5: 320 ohm + (1050 ohm || 230 nF) value 6: 370 ohm + (820 ohm || 110 nF) value 7: 275 ohm + (780 ohm || 115 nF) value 8: 20 ohm + (820 ohm || 110 nF) value 9: 350 ohm + (1000 ohm || 210 nF) value 10:200 ohm + (680 ohm || 100 nF) value 11:600 ohm + 2.16 uF value 12:900 ohm + 1 uF value 13:900 ohm + 2.16 uF value 14:600 ohm + 1 uF value 15: Global impedance The default value is 600 ohm.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.5Integer32 (0..15)read-writecurrent
hwFxsReceiveGain
OBJECT-TYPE
This object indicates the receive gain of an FXS interface. The value ranges from -12 to 0 with a step of 0.5, in dB. The default value is -7 dB.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.6OCTET STRINGread-writecurrent
hwFxsSendGain
OBJECT-TYPE
This object indicates the transmit gain of an FXS interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.7OCTET STRINGread-writecurrent
hwFxsLineLock
OBJECT-TYPE
This object indicates whether line lock is enabled for an FXS interface. The value can be enable or disable. The default value is enable.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.8INTEGER {enable(1), disable(2)}read-writecurrent
hwFxsHotLine
OBJECT-TYPE
This object indicates whether the hotline function is enabled for an FXS interface. The value can be enable or disable. The default value is enable.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.9INTEGER {enable(1), disable(2)}read-writecurrent
hwFxoFeedMaxVoltage
OBJECT-TYPE
This object indicates the maximum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -20V.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.10Integer32 (-100..0)read-writecurrent
hwFxoFeedMinVoltage
OBJECT-TYPE
This object indicates the minimum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -80V.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.11Integer32 (-100..0)read-writecurrent
hwFxoFeedMaxCurrent
OBJECT-TYPE
This object indicates the maximum feed current allowed by an FXO interface. The value can be 25mA,30mA,35mA or 40mA. The default value is 35mA.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.12INTEGER {mA25(1), mA30(2), mA35(3), mA40(4)}read-writecurrent
hwFxoFeedMinCurrent
OBJECT-TYPE
This object indicates the minimum feed current allowed by an FXO interface. The value can be 16mA,17mA,18mA,19mA or 20mA. The default value is 16mA.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.13INTEGER {mA16(1), mA17(2), mA18(3), mA19(4), mA20(5)}read-writecurrent
hwFxoReceiveGain
OBJECT-TYPE
This object indicates the receive gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.14OCTET STRINGread-writecurrent
hwFxoSendGain
OBJECT-TYPE
This object indicates the transmit gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.15OCTET STRINGread-writecurrent
hwFxoDcImpedance
OBJECT-TYPE
This object indicates the DC impedance of an FXO interface. The value can be 50 ohm or 800 ohm. The default value is 50 ohm.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.16INTEGER {ohm50(1), ohm800(2)}read-writecurrent
hwFxoAcImpedance
OBJECT-TYPE
This object indicates the AC impedance of an FXO interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 120 nF) and 220 ohm + (820 ohm || 115 nF) value 4: 370 ohm + (620 ohm || 310 nF) value 5: 320 ohm + (1050 ohm || 230 nF) value 6: 370 ohm + (820 ohm || 110 nF) value 7: 275 ohm + (780 ohm || 115 nF) value 8: 20 ohm + (820 ohm || 110 nF) value 9: 350 ohm + (1000 ohm || 210 nF) value 10:200 ohm + (680 ohm || 100 nF) value 11:600 ohm + 2.16 uF value 12:900 ohm + 1 uF value 13:900 ohm + 2.16 uF value 14:600 ohm + 1 uF value 15: Global impedance The default value is 600 ohm.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.17Integer32 (0..15)read-writecurrent
hwFxoRingMinDuration
OBJECT-TYPE
This object indicates the minimum duration that an FXO interface takes to confirm a ringing current. The value can be 100ms,150ms,200ms,256ms,384ms,512ms,640ms or 1024ms. The default value is 200ms.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.18INTEGER {ms100(1), ms150(2), ms200(3), ms256(4), ms384(5), ms512(6), ms640(7), ms1024(8)}read-writecurrent
hwFxoRingMaxInterval
OBJECT-TYPE
This object indicates a ringing current timeout period on a FXO interface. The default value is notuse.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.19INTEGER {notuse(1), ms128(2), ms256(3), ms284(4), ms512(5), ms640(6), ms768(7), ms896(8), ms1024(9), ms1152(10), ms1280(11), ms1408(12), ms1536(13), ms1664(14), ms1792(15), ms1920(16)}read-writecurrent
hwFxoRingFrequence
OBJECT-TYPE
This object indicates a ringing current's frequency detected by an FXO interface. The value can be 16hz,25hz or 50hz. The default value is 25hz.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.20INTEGER {hz16(1), hz25(2), hz50(3)}read-writecurrent
hwFxoRingAcAmplitude
OBJECT-TYPE
This object indicates a ringing current's AC amplitude detected by an FXO interface. The value can be 74V,65V or 50V. The default value is 50V.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.21INTEGER {v74(1), v65(2), v50(3)}read-writecurrent
hwFxoRingOffset
OBJECT-TYPE
This object indicates a ringing current's AC offset detected by an FXO interface. The value ranges from 0 to 100. The default value is 70mA.
1.3.6.1.4.1.2011.5.25.157.1.23.2.1.22Integer32 (0..100)read-writecurrent
hwRsTable
OBJECT-TYPE
This table lists the attributes of all RS interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.3not-accessiblecurrent
hwRsEntry
OBJECT-TYPE
This table lists the attributes of all RS interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1not-accessiblecurrent
hwRsIfIndex
OBJECT-TYPE
The value of this object identifies the index of a serial interface on a device.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.1InterfaceIndexnot-accessiblecurrent
hwRsPortMode
OBJECT-TYPE
This object indicates the type of a serial interface. The value can be rs-232,rs-485,rs-422,,v.24,x.21 or v.35. For AND1MPAA PICs: Ports 0 and 2 work in rs-232 mode. The working mode cannot be configured. Ports 1 and 3 can work either in rs-485 or rs-422 mode. The default mode is rs-422. For AND1SA8 PICs, all ports can work in v-35, x-21, or v-24 mode. The default mode is v-24.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.2INTEGER {rs232(1), rs485(2), rs422(3), v24(4), x21(5), v35(6)}read-writecurrent
hwRsWorkMode
OBJECT-TYPE
This object indicates the mode in which a serial interface works. The value can be dce or dte. The default value is dce.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.3INTEGER {dce(1), dte(2)}read-writecurrent
hwRsPhysicalMode
OBJECT-TYPE
This object indicates the mode in which a serial interface transmits signals. The value can be async or sync. The default value is async.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.4INTEGER {async(1), sync(2)}read-writecurrent
hwRsClockSource
OBJECT-TYPE
This object indicates the clock source mode of a serial interface. The value can be internal,external or slave. The default value is internal.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.5INTEGER {internal(1), external(2), slave(3)}read-writecurrent
hwRsBaudrate
OBJECT-TYPE
This object indicates the baud rate of a serial interface. The value can be : 0: 600bit/s, 1: 1200bit/s, 2: 2400bit/s, 3: 4800bit/s, 4: 9600bit/s, 5: 19200bit/s, 6: 38400bit/s, 7: 48000bit/s, 8~38: N*64Kbit/s N<=31. The default value is 9600 bit/s in asynchronous transmission mode and 64 kbit/s in synchronous transmission mode.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.6Integer32 (0..38)read-writecurrent
hwRsClockSendMode
OBJECT-TYPE
This object indicates the mode in which clock signals transmitted by a serial interface are sampled. This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is inversephase.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.7INTEGER {inphase(1), inversephase(2)}read-writecurrent
hwRsClockReceiveMode
OBJECT-TYPE
This object indicates the mode in which clock signals received by a serial interface are sampled. This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is inphase.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.8INTEGER {inphase(1), inversephase(2)}read-writecurrent
hwRsParity
OBJECT-TYPE
This object indicates the parity check mode of a serial interface's asynchronous frames. This mode can be configured in asynchronous clock mode. The value can be none,even or odd. The default value is none.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.9INTEGER {none(1), even(2), odd(3)}read-writecurrent
hwRsStopbits
OBJECT-TYPE
This object indicates the number of stop bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. The value can be 1-bits or 2-bits. The default value is 1-bits.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.10INTEGER {bits1(1), bits2(2)}read-writecurrent
hwRsDatabits
OBJECT-TYPE
This object indicates the number of data bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. The value ranges from 5 to 8 bits.The default value is 8 bits.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.11Integer32 (5..8)read-writecurrent
hwRsMuxProtocol
OBJECT-TYPE
This object indicates the type of a serial interface's sub-rate multiplexing protocol. This object can be configured in asynchronous clock mode. The value can be sbit-loop,sbit=0 or sbit=1. The default value is sbit-loop.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.12INTEGER {sbitloop(1), sbit0(2), sbit1(3)}read-writecurrent
hwRsX50PhaseMode
OBJECT-TYPE
This object indicates the envelope phase mode multiplexed by a serial interface's x.50 sub-rate. The value can be sequence or interval. The default value is sequence.
1.3.6.1.4.1.2011.5.25.157.1.23.3.1.13INTEGER {sequence(1), interval(2)}read-writecurrent
hwGlobalCfgTable
OBJECT-TYPE
This table lists the global physical attributes of all narrowband interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.4not-accessiblecurrent
hwGlobalCfgEntry
OBJECT-TYPE
This table lists the global physical attributes of all narrowband interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.4.1not-accessiblecurrent
hwNarrowBandCardId
OBJECT-TYPE
The value of this object identifies the ID of a narrowband card on a device.
1.3.6.1.4.1.2011.5.25.157.1.23.4.1.1Integer32read-onlycurrent
hwSignalMode
OBJECT-TYPE
Indicates the global signal mode of the physical serial interface. By default, the signal mode is bell5. This object indicates the global signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5.
1.3.6.1.4.1.2011.5.25.157.1.23.4.1.2INTEGER {bell1(1), bell2(2), bell3(3), bell4(4), bell5(5)}read-writecurrent
hwUserLine
OBJECT-TYPE
This object indicates the global user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire.
1.3.6.1.4.1.2011.5.25.157.1.23.4.1.3INTEGER {twoWire(1), fourWire(2)}read-writecurrent
hwNbCommonTable
OBJECT-TYPE
This table lists the common attributes of all narrowband interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.5not-accessiblecurrent
hwNbCommonEntry
OBJECT-TYPE
This table lists the common attributes of all narrowband interfaces.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1not-accessiblecurrent
hwNbIfIndex
OBJECT-TYPE
The value of this object identifies the index of an narrowband interface.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1.1InterfaceIndexnot-accessiblecurrent
hwNbLoopback
OBJECT-TYPE
The local loopback of an narrowband interface is used to test the interface itself. By default, stopLoopback is used.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1.2INTEGER {stopLoopback(1), local(2), remote(3), otherLoop(4)}read-writecurrent
hwNbPortType
OBJECT-TYPE
This object indicates the type of a serial interface.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1.3INTEGER {rs232(1), rs485(2), rs422(3), v24(4), x21(5), v35(6), fxs(7), fxo(8), em(9), c3794(10), c64k(11)}read-onlycurrent
hwNbAcBlock
OBJECT-TYPE
This object indicates the AC state of a serial interface.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1.4INTEGER {block(1), active(2), unsupport(255)}read-onlycurrent
hwNbTimeDelayMaster
OBJECT-TYPE
This object indicates the delay configured for the primary link of a serial interface.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1.5Integer32read-onlycurrent
hwNbTimeDelaySlave
OBJECT-TYPE
This object indicates the delay configured for the secondary link of a serial interface.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1.6Integer32read-onlycurrent
hwNbRealTimeDelay
OBJECT-TYPE
This object indicates the real-time delay of a serial interface.
1.3.6.1.4.1.2011.5.25.157.1.23.5.1.7Integer32read-onlycurrent
hwLinkHeartbeat
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.24
hwLinkHeartbeatFaultTable
OBJECT-TYPE
Link-heartbeat alarm fault info table.The table that contains send packets interface and receive packets interface information currently operating on this device.
1.3.6.1.4.1.2011.5.25.157.1.24.1not-accessiblecurrent
hwLinkHeartbeatFaultEntry
OBJECT-TYPE
Link-heartbeat alarm fault info entry.
1.3.6.1.4.1.2011.5.25.157.1.24.1.1not-accessiblecurrent
hwLinkHeartbeatIfindex
OBJECT-TYPE
The interface index.
1.3.6.1.4.1.2011.5.25.157.1.24.1.1.1InterfaceIndexread-onlycurrent
hwLinkHeartbeatIfName
OBJECT-TYPE
The interface name.
1.3.6.1.4.1.2011.5.25.157.1.24.1.1.2OCTET STRING (SIZE(0..64))read-onlycurrent
hwLinkHeartbeatTxInterface
OBJECT-TYPE
The send physical interface name.
1.3.6.1.4.1.2011.5.25.157.1.24.1.1.3OCTET STRING (SIZE(0..64))read-onlycurrent
hwLinkHeartbeatRxInterface
OBJECT-TYPE
The receive physical interface name.
1.3.6.1.4.1.2011.5.25.157.1.24.1.1.4OCTET STRING (SIZE(0..64))read-onlycurrent
hwPortTotalStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.25
hwPortTotalStatTable
OBJECT-TYPE
This table lists the port total statistics.
1.3.6.1.4.1.2011.5.25.157.1.25.1not-accessiblecurrent
hwPortTotalStatEntry
OBJECT-TYPE
Indicates the port total statistics.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1not-accessiblecurrent
hwPortTotalStatIfIndex
OBJECT-TYPE
The index of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.1InterfaceIndexread-onlycurrent
hwPortTotalStatIfName
OBJECT-TYPE
The name of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.2OCTET STRING (SIZE(0..64))read-onlycurrent
hwPortTotalStatInPkts
OBJECT-TYPE
Received total Pkts stat of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.3Counter64read-onlycurrent
hwPortTotalStatInOctets
OBJECT-TYPE
Received total Octets stat of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.4Counter64read-onlycurrent
hwPortTotalStatInErrors
OBJECT-TYPE
Received total error Pkts stat of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.5Counter64read-onlycurrent
hwPortTotalStatOutPkts
OBJECT-TYPE
Send total Pkts stat of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.6Counter64read-onlycurrent
hwPortTotalStatOutOctets
OBJECT-TYPE
Send total Octets stat of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.7Counter64read-onlycurrent
hwPortTotalStatOutErrors
OBJECT-TYPE
Send total error Pkts stat of this interface.
1.3.6.1.4.1.2011.5.25.157.1.25.1.1.8Counter64read-onlycurrent
hwSubIfNumExceededSpecTrapObject
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.26
hwSubIfSpecNum
OBJECT-TYPE
The number of sub interface spec.
1.3.6.1.4.1.2011.5.25.157.1.26.1Integer32accessible-for-notifycurrent
hwPortSpeedTrapObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.1.27
hwPhysicalPortCurSpeed
OBJECT-TYPE
The speed of port after change.
1.3.6.1.4.1.2011.5.25.157.1.27.1Integer32accessible-for-notifycurrent
hwPhysicalPortLastSpeed
OBJECT-TYPE
The speed of port before change.
1.3.6.1.4.1.2011.5.25.157.1.27.2Integer32accessible-for-notifycurrent
hwPortNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2
hwDslImaGroupTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2.2
hwDslImaLinkTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2.3
hwDslLinkTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2.4
hwPortAlarmTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2.157
hwPhysicalPortFlowSurge
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2.157.17
hwOtnAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2.212
hwNarrowBandTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.2.221
hwPortConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.11
hwPortCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.11.1
hwPortGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.157.11.2

Notifications

NameOIDStatus
hwPortACRMasterPWChange
NOTIFICATION-TYPE
CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a pw is deleted or the pw status change.
1.3.6.1.4.1.2011.5.25.157.2.1current
hwDslImaGroupLEDown
NOTIFICATION-TYPE
The ima group local edge down notification.
1.3.6.1.4.1.2011.5.25.157.2.2.1current
hwDslImaGroupLEUp
NOTIFICATION-TYPE
The ima group local edge up notification.
1.3.6.1.4.1.2011.5.25.157.2.2.2current
hwDslImaGroupREDown
NOTIFICATION-TYPE
The ima group remote edge down notification.
1.3.6.1.4.1.2011.5.25.157.2.2.3current
hwDslImaGroupREUp
NOTIFICATION-TYPE
The ima group remote edge up notification.
1.3.6.1.4.1.2011.5.25.157.2.2.4current
hwDslImaLinkLif
NOTIFICATION-TYPE
The ima link lif notification.
1.3.6.1.4.1.2011.5.25.157.2.3.1current
hwDslImaLinkLifResume
NOTIFICATION-TYPE
The ima link lif resume notification.
1.3.6.1.4.1.2011.5.25.157.2.3.2current
hwDslImaLinkLods
NOTIFICATION-TYPE
The ima link lods notification.
1.3.6.1.4.1.2011.5.25.157.2.3.3current
hwDslImaLinkLodsResume
NOTIFICATION-TYPE
The ima link lods resume notification.
1.3.6.1.4.1.2011.5.25.157.2.3.4current
hwDslImaLinkRfi
NOTIFICATION-TYPE
The ima link rfi notification.
1.3.6.1.4.1.2011.5.25.157.2.3.5current
hwDslImaLinkRfiResume
NOTIFICATION-TYPE
The ima link rfi resume notification.
1.3.6.1.4.1.2011.5.25.157.2.3.6current
hwDslImaLinkReTxUnusable
NOTIFICATION-TYPE
The ima link remote tx unusable notification.
1.3.6.1.4.1.2011.5.25.157.2.3.7current
hwDslImaLinkReTxUsable
NOTIFICATION-TYPE
The ima link remote tx usable notification.
1.3.6.1.4.1.2011.5.25.157.2.3.8current
hwDslImaLinkReRxUnusable
NOTIFICATION-TYPE
The ima link remote rx unusable notification.
1.3.6.1.4.1.2011.5.25.157.2.3.9current
hwDslImaLinkReRxUsable
NOTIFICATION-TYPE
The ima link remote tx usable notification.
1.3.6.1.4.1.2011.5.25.157.2.3.10current
hwDslLinkFrameLost
NOTIFICATION-TYPE
The dsl link frame lost notification.
1.3.6.1.4.1.2011.5.25.157.2.4.1current
hwDslLinkFrameResume
NOTIFICATION-TYPE
The dsl link frame resume notification.
1.3.6.1.4.1.2011.5.25.157.2.4.2current
hwDslLinkSignalLost
NOTIFICATION-TYPE
The dsl link signal lost notification.
1.3.6.1.4.1.2011.5.25.157.2.4.3current
hwDslLinkSignalResume
NOTIFICATION-TYPE
The dsl link signal resume notification.
1.3.6.1.4.1.2011.5.25.157.2.4.4current
hwCesPwRemoteLosPktAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.5current
hwCesPwRemoteLosPktAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.6current
hwCesPwOppositeRai
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.7current
hwCesPwOppositeRaiResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.8current
hwLosAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.9current
hwLosAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.10current
hwLofAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.11current
hwLofAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.12current
hwOofAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.13current
hwOofAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.14current
hwB1TcaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.15current
hwB1TcaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.16current
hwB2TcaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.17current
hwB2TcaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.18current
hwJ0TimAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.19current
hwJ0TimAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.20current
hwLrdiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.21current
hwLrdiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.22current
hwSfbereAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.23current
hwSfbereAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.24current
hwAuLopAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.25current
hwAuLopAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.26current
hwLaisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.27current
hwLaisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.28current
hwSdbereAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.29current
hwSdbereAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.30current
hwPtimAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.31current
hwPtimAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.32current
hwPuneqAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.33current
hwPuneqAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.34current
hwPrdiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.35current
hwPrdiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.36current
hwB3TcaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.37current
hwB3TcaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.38current
hwPplmAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.39current
hwPplmAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.40current
hwPaisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.41current
hwPaisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.42current
hwAuAisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.43current
hwAuAisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.44current
hwVlopAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.45current
hwVlopAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.46current
hwLomAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.47current
hwLomAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.48current
hwLpTimVc12Alarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.49current
hwLpTimVc12AlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.50current
hwLpUneqVc12Alarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.51current
hwLpUneqVc12AlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.52current
hwVrdiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.53current
hwVrdiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.54current
hwBip2TcaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.57current
hwBip2TcaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.58current
hwLpSlmVc12Alarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.59current
hwLpSlmVc12AlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.60current
hwTuAisVc12Alarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.61current
hwTuAisVc12AlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.62current
hwE1EsTcaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.63current
hwE1EsTcaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.64current
hwE1LmfaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.67current
hwE1LmfaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.68current
hwE1UpE1AisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.69current
hwE1UpE1AisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.70current
hwE1AlmE1RaiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.71current
hwE1AlmE1RaiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.72current
hwCesPwOppositeAcFault
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.73current
hwCesPwOppositeAcFaultResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.74current
hwCesLosPktExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.75current
hwCesLosPktExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.76current
hwCesMisorderPktExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.77current
hwCesMisorderPktExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.78current
hwCesStrayPktExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.79current
hwCesStrayPktExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.80current
hwCesMalPktExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.81current
hwCesMalPktExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.82current
hwCesJtrUdrExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.83current
hwCesJtrUdrExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.84current
hwCesJtrOvrExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.85current
hwCesJtrOvrExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.86current
hwRroolAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.87current
hwRroolAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.88current
hwVrfiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.89current
hwVrfiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.90current
hwV5VcaisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.91current
hwV5VcaisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.92current
hwCposE1AlmE1RaiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.95current
hwCposE1AlmE1RaiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.96current
hwCposE1LfaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.97current
hwCposE1LfaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.98current
hwCposE1UpE1AisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.99current
hwCposE1UpE1AisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.100current
hwCposE1DownE1AisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.101current
hwCposE1DownE1AisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.102current
hwE1DownE1AisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.103current
hwE1DownE1AisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.104current
hwCposE1LmfaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.111current
hwCposE1LmfaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.112current
hwLaserShutAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.113current
hwLaserShutAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.114current
hwLaserAutoShutAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.115current
hwLaserAutoShutAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.116current
hwLoopbackAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.117current
hwLoopbackAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.118current
hwOcdAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.119current
hwOcdAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.120current
hwLcdAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.121current
hwLcdAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.122current
hwUhcsAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.123current
hwUhcsAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.124current
hwChcsAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.125current
hwChcsAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.126current
hwChannelLoopbackAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.127current
hwChannelLoopbackAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.128current
hwCesLopsAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.129current
hwCesLopsAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.130current
hwAtmPwLosPktExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.131current
hwAtmPwLosPktExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.132current
hwAtmPwMisorderPktExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.133current
hwAtmPwMisorderPktExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.134current
hwAtmPwUnknownCellExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.135current
hwAtmPwUnknownCellExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.136current
hwInputErrorAlarm
NOTIFICATION-TYPE
The port input errors notification.
1.3.6.1.4.1.2011.5.25.157.2.153current
hwInputErrorAlarmResume
NOTIFICATION-TYPE
The port input errors resume notification.
1.3.6.1.4.1.2011.5.25.157.2.154current
hwOutputErrorAlarm
NOTIFICATION-TYPE
The port output errors notification.
1.3.6.1.4.1.2011.5.25.157.2.155current
hwOutputErrorAlarmResume
NOTIFICATION-TYPE
The port output errors resume notification.
1.3.6.1.4.1.2011.5.25.157.2.156current
hwPhysicalPortCrcError
NOTIFICATION-TYPE
Port Crc error alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.157.1current
hwPhysicalPortCrcErrorResume
NOTIFICATION-TYPE
Port Crc error alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.157.2current
hwPhysicalPortSymbolError
NOTIFICATION-TYPE
Port Symbol error alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.157.3current
hwPhysicalPortSymbolErrorResume
NOTIFICATION-TYPE
Port Symbol error alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.157.4current
hwPhysicalPortSdhError
NOTIFICATION-TYPE
Port Sdh error alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.157.5current
hwPhysicalPortSdhErrorResume
NOTIFICATION-TYPE
Port Sdh error alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.157.6current
hwPhysicalPortBip8SdError
NOTIFICATION-TYPE
Port BIP8 Signal Degrade alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.157.7current
hwPhysicalPortBip8SdErrorResume
NOTIFICATION-TYPE
Port BIP8 Signal Degrade alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.157.8current
hwPhysicalPortCrcPacketErrorRatio
NOTIFICATION-TYPE
Port CRC-PER(Packet Error Ratio) alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.157.9current
hwPhysicalPortCrcPacketErrorRatioResume
NOTIFICATION-TYPE
Port CRC-PER(Packet Error Ratio) alarm resume notification.
1.3.6.1.4.1.2011.5.25.157.2.157.10current
hwPhysicalPortCrcSd
NOTIFICATION-TYPE
Port MAC_FCS_SD alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.157.11current
hwPhysicalPortCrcSdResume
NOTIFICATION-TYPE
Port MAC_FCS_SD alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.157.12current
hwPhysicalPortCrcExc
NOTIFICATION-TYPE
Port MAC_FCS_EXC alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.157.13current
hwPhysicalPortCrcExcResume
NOTIFICATION-TYPE
Port MAC_FCS_EXC alarm resume notification.
1.3.6.1.4.1.2011.5.25.157.2.157.14current
hwPhysicalPortCrcPerWarning
NOTIFICATION-TYPE
Port CRC-PER(Packet Error Ratio) warning notification.
1.3.6.1.4.1.2011.5.25.157.2.157.15current
hwPhysicalPortCrcPerWarningResume
NOTIFICATION-TYPE
Port CRC-PER(Packet Error Ratio) warning resume notification.
1.3.6.1.4.1.2011.5.25.157.2.157.16current
hwInputBroadcastSurgeOccur
NOTIFICATION-TYPE
Input broadcast surge occurred.
1.3.6.1.4.1.2011.5.25.157.2.157.17.1current
hwInputBroadcastSurgeResume
NOTIFICATION-TYPE
Input broadcast surge resumed.
1.3.6.1.4.1.2011.5.25.157.2.157.17.2current
hwOutputBroadcastSurgeOccur
NOTIFICATION-TYPE
Output broadcast surge occurred.
1.3.6.1.4.1.2011.5.25.157.2.157.17.3current
hwOutputBroadcastSurgeResume
NOTIFICATION-TYPE
Output broadcast surge resumed.
1.3.6.1.4.1.2011.5.25.157.2.157.17.4current
hwPortCrcRateExceed
NOTIFICATION-TYPE
Indicates that the rate of the incoming traffic packets with CRC error exceeds the alarm threshold.
1.3.6.1.4.1.2011.5.25.157.2.157.18current
hwPortErrorRateExceed
NOTIFICATION-TYPE
Indicates that the rate of the incoming traffic error packets exceeds the alarm threshold.
1.3.6.1.4.1.2011.5.25.157.2.157.19current
hwPhysicalPortInBroadcastRapidChange
NOTIFICATION-TYPE
Indicates that the rate of the input broadcast exceeds the threshold.
1.3.6.1.4.1.2011.5.25.157.2.157.20current
hwLoopBackAutoClearNotice
NOTIFICATION-TYPE
set port undo loopback while set loopback autoclear enable when time out.
1.3.6.1.4.1.2011.5.25.157.2.160current
hwChannelLoopBackAutoClearNotice
NOTIFICATION-TYPE
set channel undo loopback while set loopback autoclear enable when time out.
1.3.6.1.4.1.2011.5.25.157.2.161current
hwHpJ1TiuAlarm
NOTIFICATION-TYPE
Trace Identifier Unstable in the Higher order Path.
1.3.6.1.4.1.2011.5.25.157.2.162current
hwHpJ1TiuAlarmResume
NOTIFICATION-TYPE
Trace Identifier Unstable in the Higher order Path alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.163current
hwPortAlarmInverseAutoRecover
NOTIFICATION-TYPE
Port alarm inverse auto recover.
1.3.6.1.4.1.2011.5.25.157.2.164current
hwB1ExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.165current
hwB1ExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.166current
hwB3ExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.167current
hwB3ExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.168current
hwBip2ExcAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.169current
hwBip2ExcAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.170current
hwLicenseLimitAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.171current
hwLicenseLimitAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.172current
hwOpticalModuleIsNotAuthorized
NOTIFICATION-TYPE
Optical Module is not Authorized alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.173current
hwOpticalModuleIsNotAuthorizedResume
NOTIFICATION-TYPE
Optical Module is not Authorized alarm resume notification.
1.3.6.1.4.1.2011.5.25.157.2.174current
hwLocalFaultAlarm
NOTIFICATION-TYPE
The Local Fault alarm has occured. Local Fault indicates a fault detected on the receive data path between the remote and the local.
1.3.6.1.4.1.2011.5.25.157.2.175current
hwLocalFaultAlarmResume
NOTIFICATION-TYPE
The Local Fault alarm has resumed.
1.3.6.1.4.1.2011.5.25.157.2.176current
hwRemoteFaultAlarm
NOTIFICATION-TYPE
The Remote Fault alarm has occured. Remote Fault indicates a fault on the transmit path between the local and the remote.
1.3.6.1.4.1.2011.5.25.157.2.177current
hwRemoteFaultAlarmResume
NOTIFICATION-TYPE
The Remote Fault alarm has resumed.
1.3.6.1.4.1.2011.5.25.157.2.178current
hwCopperPolarityError
NOTIFICATION-TYPE
The copper polarity error alarm has occurred. Polarity errors have detected on receive twisted-pairs, please change a new one.
1.3.6.1.4.1.2011.5.25.157.2.179current
hwCopperPolarityErrorResume
NOTIFICATION-TYPE
The copper polarity error alarm has resumed.
1.3.6.1.4.1.2011.5.25.157.2.180current
hwLotuaisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.181current
hwLotuaisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.182current
hwLotulomAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.183current
hwLotulomAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.184current
hwLotusdberAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.185current
hwLotusdberAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.186current
hwLotusfberAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.187current
hwLotusfberAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.188current
hwLoduaisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.189current
hwLoduaisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.190current
hwLodulckAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.191current
hwLodulckAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.192current
hwLoduociAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.193current
hwLoduociAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.194current
hwLpmbdiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.195current
hwLpmbdiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.196current
hwLpmtimAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.197current
hwLpmtimAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.198current
hwLsmbdiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.199current
hwLsmbdiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.200current
hwLsmiaeAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.201current
hwLsmiaeAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.202current
hwLsmtimAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.203current
hwLsmtimAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.204current
hwNegotiationFailedAlarm
NOTIFICATION-TYPE
Auto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies; the local ability is not compatible with the peer; the physical connection of the two sides is unstable. When the alarm occurs, the port can't be up.
1.3.6.1.4.1.2011.5.25.157.2.205current
hwNegotiationFailedAlarmResume
NOTIFICATION-TYPE
Auto-negotiation failure alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.206current
hwEthHalfDuplex
NOTIFICATION-TYPE
The port works in the half-duplex mode.
1.3.6.1.4.1.2011.5.25.157.2.207current
hwEthFullDuplex
NOTIFICATION-TYPE
The half-duplex mode alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.208current
hwPhysicalPortAutoDetectFail
NOTIFICATION-TYPE
Interface auto adapter fail alarm notification.
1.3.6.1.4.1.2011.5.25.157.2.209current
hwPhysicalPortAutoDetectSuccess
NOTIFICATION-TYPE
Interface auto adapter fail alarm resume notification.
1.3.6.1.4.1.2011.5.25.157.2.210current
hwNotSameBoardInTrunk
NOTIFICATION-TYPE
Not same boards in Eth-trunk.
1.3.6.1.4.1.2011.5.25.157.2.211current
hwOtuLomAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.1current
hwOtuLomAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.2current
hwOtuAisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.3current
hwOtuAisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.4current
hwOtuSdAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.5current
hwOtuSdAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.6current
hwOtuSfAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.7current
hwOtuSfAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.8current
hwSmBdiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.9current
hwSmBdiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.10current
hwSmIaeAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.11current
hwSmIaeAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.12current
hwSmTimAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.13current
hwSmTimAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.14current
hwOduAisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.15current
hwOduAisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.16current
hwOduLokAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.17current
hwOduLokAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.18current
hwOduOciAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.19current
hwOduOciAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.20current
hwPmBdiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.21current
hwPmBdiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.22current
hwPmTimAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.23current
hwPmTimAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.24current
hwPrefecTcaAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.212.25current
hwPrefecTcaAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.212.26current
hwE3UpE3AisAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.213current
hwE3UpE3AisAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.214current
hwE3AlmE3RaiAlarm
NOTIFICATION-TYPE
Indicates the alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.215current
hwE3AlmE3RaiAlarmResume
NOTIFICATION-TYPE
Indicates the alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.216current
hwMultiServiceOnOneCardAlarm
NOTIFICATION-TYPE
Multiple services be configured on the same chip of the card.
1.3.6.1.4.1.2011.5.25.157.2.217current
hwMultiServiceOnOneCardAlarmResume
NOTIFICATION-TYPE
There is no multiple services on the same chip of the card.
1.3.6.1.4.1.2011.5.25.157.2.218current
hwInputRateChangeOverThresholdNotice
NOTIFICATION-TYPE
The input rate change ratio exceeded the threshold.
1.3.6.1.4.1.2011.5.25.157.2.219current
hwOutputRateChangeOverThresholdNotice
NOTIFICATION-TYPE
The output rate change ratio exceeded the threshold.
1.3.6.1.4.1.2011.5.25.157.2.220current
hwX50LofAlarm
NOTIFICATION-TYPE
X.50 sub-rate out of frame occurred.
1.3.6.1.4.1.2011.5.25.157.2.221.1current
hwX50LofAlarmResume
NOTIFICATION-TYPE
X.50 sub-rate out of frame was cleared.
1.3.6.1.4.1.2011.5.25.157.2.221.2current
hwX50AbitAlarm
NOTIFICATION-TYPE
X.50 deframing failed on the remote device.
1.3.6.1.4.1.2011.5.25.157.2.221.3current
hwX50AbitAlarmResume
NOTIFICATION-TYPE
The X.50 deframing failure was cleared on the remote device.
1.3.6.1.4.1.2011.5.25.157.2.221.4current
hwLinkHeartbeatDropAlarm
NOTIFICATION-TYPE
Link-heartbeat drop alarm.
1.3.6.1.4.1.2011.5.25.157.2.222current
hwLinkHeartbeatDropAlarmResume
NOTIFICATION-TYPE
Link-heartbeat drop alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.223current
hwLinkHeartbeatChangeAlarm
NOTIFICATION-TYPE
Link-heartbeat change alarm.
1.3.6.1.4.1.2011.5.25.157.2.224current
hwLinkHeartbeatChangeAlarmResume
NOTIFICATION-TYPE
Link-heartbeat change alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.225current
hwPortPhysicalRateDegradeAlarm
NOTIFICATION-TYPE
The physical rate degrade alarm.
1.3.6.1.4.1.2011.5.25.157.2.226current
hwPortPhysicalRateDegradeAlarmResume
NOTIFICATION-TYPE
The physical rate degrade alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.227current
hwLicenseInactiveAlarm
NOTIFICATION-TYPE
The interface license was not activated.
1.3.6.1.4.1.2011.5.25.157.2.228current
hwLicenseInactiveAlarmResume
NOTIFICATION-TYPE
The interface license inactivation alarm was cleared.
1.3.6.1.4.1.2011.5.25.157.2.229current
hwLicenseResourceLackAlarm
NOTIFICATION-TYPE
Interfaces of this type in use exceeded the maximum number.
1.3.6.1.4.1.2011.5.25.157.2.230current
hwLicenseResourceLackAlarmResume
NOTIFICATION-TYPE
The maximum number-crossing alarm was cleared.
1.3.6.1.4.1.2011.5.25.157.2.231current
hwPortModeChangeTrap
NOTIFICATION-TYPE
Indicates the mode of a port is changed.
1.3.6.1.4.1.2011.5.25.157.2.232current
hwRdiAlarm
NOTIFICATION-TYPE
The peer end was faulty.
1.3.6.1.4.1.2011.5.25.157.2.233current
hwRdiAlarmResume
NOTIFICATION-TYPE
The peer end recovered from faults.
1.3.6.1.4.1.2011.5.25.157.2.234current
hwAisAlarm
NOTIFICATION-TYPE
Upstream signals were abnormal.
1.3.6.1.4.1.2011.5.25.157.2.235current
hwAisAlarmResume
NOTIFICATION-TYPE
Upstream signals recovered.
1.3.6.1.4.1.2011.5.25.157.2.236current
hwCollisionAlarm
NOTIFICATION-TYPE
The link encountered a collision.
1.3.6.1.4.1.2011.5.25.157.2.237current
hwCollisionAlarmResume
NOTIFICATION-TYPE
The link recovered from a collision.
1.3.6.1.4.1.2011.5.25.157.2.238current
hwSubIfNumExceededSpecAlarm
NOTIFICATION-TYPE
The nunber of sub interface exceeded spec alarm.
1.3.6.1.4.1.2011.5.25.157.2.239current
hwSubIfNumExceededSpecAlarmResume
NOTIFICATION-TYPE
The number of sub interface exceeded spec alarm resume.
1.3.6.1.4.1.2011.5.25.157.2.240current
hwPortSpeedChangeTrap
NOTIFICATION-TYPE
The speed of port is changed.
1.3.6.1.4.1.2011.5.25.157.2.241current
hwPortGroupTransModeDiff
NOTIFICATION-TYPE
This group of interfaces do not work in the same transmission mode.
1.3.6.1.4.1.2011.5.25.157.2.242current
hwPortGroupTransModeDiffResume
NOTIFICATION-TYPE
This group of interfaces work in the same transmission mode now.
1.3.6.1.4.1.2011.5.25.157.2.243current
hwImpedanceMismatch
NOTIFICATION-TYPE
The configured interface impedance value did not match that of the cable.
1.3.6.1.4.1.2011.5.25.157.2.244current
hwPicLcdAlarm
NOTIFICATION-TYPE
Loss of code group synchronization alarm is detected.
1.3.6.1.4.1.2011.5.25.157.2.245current
hwPicLcdAlarmResume
NOTIFICATION-TYPE
Loss of code group synchronization alarm is cleared.
1.3.6.1.4.1.2011.5.25.157.2.246current
hwBoardNotSupportAssignTrunk
NOTIFICATION-TYPE
The card does not support extensions of Eth-Trunk specifications.
1.3.6.1.4.1.2011.5.25.157.2.247current
hwPortProtectGroupUnavailable
NOTIFICATION-TYPE
The port protection group is unavailable.
1.3.6.1.4.1.2011.5.25.157.2.248current
hwPortProtectGroupAvailable
NOTIFICATION-TYPE
The port protection group is available.
1.3.6.1.4.1.2011.5.25.157.2.249current
hwPortProtectGroupDelete
NOTIFICATION-TYPE
The port protection group was deleted.
1.3.6.1.4.1.2011.5.25.157.2.250current
hwDelayOverConfig
NOTIFICATION-TYPE
Real-time E2E Delay Exceeded the Configured Delay.
1.3.6.1.4.1.2011.5.25.157.2.251current
hwDelayOverConfigResume
NOTIFICATION-TYPE
Alarm Indicating the Real-time E2E Delay Exceeded the Configured Delay Was Cleared.
1.3.6.1.4.1.2011.5.25.157.2.252current
hwAcBlockAlarm
NOTIFICATION-TYPE
AC interface blocking alarm.
1.3.6.1.4.1.2011.5.25.157.2.253current
hwAcBlockAlarmResume
NOTIFICATION-TYPE
AC interface blocking alarm clearing.
1.3.6.1.4.1.2011.5.25.157.2.254current
hwPortLicenseActFail
NOTIFICATION-TYPE
Failed to activate the port license.
1.3.6.1.4.1.2011.5.25.157.2.255current
hwPortLicenseActSuccess
NOTIFICATION-TYPE
Succeed to activate the port license.
1.3.6.1.4.1.2011.5.25.157.2.256current
hwCableSnrAbnormal
NOTIFICATION-TYPE
The network cable is of poor quality.
1.3.6.1.4.1.2011.5.25.157.2.257current
hwCableSnrNormal
NOTIFICATION-TYPE
The network cable is of good quality.
1.3.6.1.4.1.2011.5.25.157.2.258current
hwCableSnrDetectNotSupport
NOTIFICATION-TYPE
The network cable quality cannot be detected.
1.3.6.1.4.1.2011.5.25.157.2.259current

Conformance

NameOIDStatus
hwPortCompliance
MODULE-COMPLIANCE
The compliance statement for systems supporting the HUAWEI-PORT-MIB.
1.3.6.1.4.1.2011.5.25.157.11.1.1current
hwEthernetObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.1current
hwPosObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.2current
hwCposObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.3current
hwDs0ChannelBundleObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.4current
hwDs1ObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.5current
hwDs3ObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.6current
hwBundleSerialObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.7current
hwPortNotificationsGroup
NOTIFICATION-GROUP
This is the group of port notifiction.
1.3.6.1.4.1.2011.5.25.157.11.2.8current
hwDslGroupObjectGroup
OBJECT-GROUP
The dsl group attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.9current
hwDslGroupImaObjectGroup
OBJECT-GROUP
The dsl group ima attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.10current
hwDslLinkObjectGroup
OBJECT-GROUP
The dsl link attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.11current
hwDslImaTrapGroup
NOTIFICATION-GROUP
The dsl Ima Trap group.
1.3.6.1.4.1.2011.5.25.157.11.2.20current
hwDslLinkTrapGroup
NOTIFICATION-GROUP
The dsl Link Trap group.
1.3.6.1.4.1.2011.5.25.157.11.2.21current
hwPortAlarmThresholdObjectGroup
OBJECT-GROUP
The port alarm threshold group.
1.3.6.1.4.1.2011.5.25.157.11.2.22current
hwPortAlarmDownEnableObjectGroup
OBJECT-GROUP
The port alarm down enable group.
1.3.6.1.4.1.2011.5.25.157.11.2.23current
hwLogicalPortObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.157.11.2.24current
hwPortAlarmTrapGroup
NOTIFICATION-GROUP
The port alarm trap group.
1.3.6.1.4.1.2011.5.25.157.11.2.25current
hwPortPhysicalObjectGroup
OBJECT-GROUP
The port physical object group.
1.3.6.1.4.1.2011.5.25.157.11.2.26current
hwPortProtectObjectGroup
OBJECT-GROUP
A collection of objects providing port protect group status information.
1.3.6.1.4.1.2011.5.25.157.11.2.27current
hwPortDescriptinonObjectGroup
OBJECT-GROUP
The port description object group
1.3.6.1.4.1.2011.5.25.157.11.2.28current
hwOtnAlarmNotificationsGroup
NOTIFICATION-GROUP
This is the group of OTN port notifications.
1.3.6.1.4.1.2011.5.25.157.11.2.29current
hwLinkHeartbeatObjectGroup
OBJECT-GROUP
The link-heartbeat object group.
1.3.6.1.4.1.2011.5.25.157.11.2.30current
hwPortTotalStatObjectGroup
OBJECT-GROUP
The port total stat object group.
1.3.6.1.4.1.2011.5.25.157.11.2.31current
hwPortSpeedTrapObjectsGroup
OBJECT-GROUP
The port speed change trap object group
1.3.6.1.4.1.2011.5.25.157.11.2.32current