HUAWEI-IMA-MIB
- Registered at
- 1.3.6.1.4.1.2011.5.25.176
- Last updated
- 2017-02-17 00:00
- Organization
- Huawei Technologies Co.,Ltd.
- Revisions
- 2017-02-17 00:00
- Namespace
- huawei
- Source file
HUAWEI-IMA-MIB- Digest
sha256:fbd248c8a5ec348685fe88cded116ac67a0bf5b83f29bd8439b491d34b12fe66
Description
The MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces.
Contact
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com
Imports
| From | Symbols |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HUAWEI-IMA-MIB HUAWEI-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ImaFrameLength TEXTUAL-CONVENTION Length of the IMA frames. | current | |||
| ImaGroupState TEXTUAL-CONVENTION State of the IMA group. | current | |||
| ImaGroupSymmetry TEXTUAL-CONVENTION The group symmetry mode adjusted during the group start-up. | current | |||
| ImaLinkState TEXTUAL-CONVENTION State of a link belonging to an IMA group. | current | |||
| MilliSeconds TEXTUAL-CONVENTION Time in milliseconds | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwImaMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.176.1 | |||
| hwImaGroupTable OBJECT-TYPE The IMA Group Configuration table. | 1.3.6.1.4.1.2011.5.25.176.1.1 | not-accessible | current | |
| hwImaGroupEntry OBJECT-TYPE An entry in the IMA Group table. | 1.3.6.1.4.1.2011.5.25.176.1.1.1 | not-accessible | current | |
| hwImaGroupIfIndex OBJECT-TYPE This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. Note that re-initialization of the management agent may cause a client's 'hwImaGroupIfIndex' to change. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.1 | InterfaceIndex | read-only | current |
| hwImaGroupNeState OBJECT-TYPE The current operational state of the near-end IMA Group State Machine. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.2 | ImaGroupState | read-only | current |
| hwImaGroupFeState OBJECT-TYPE The current operational state of the far-end IMA Group State Machine. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.3 | ImaGroupState | read-only | current |
| hwImaGroupSymmetry OBJECT-TYPE Symmetry of the IMA group. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.4 | ImaGroupSymmetry | read-only | current |
| hwImaGroupMinNumTxLinks OBJECT-TYPE Minimum number of transmit links required to be Active for the IMA group to be in the Operational state. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.5 | Integer32 (1..32) | read-create | current |
| hwImaGroupMinNumRxLinks OBJECT-TYPE Minimum number of receive links required to be Active for the IMA group to be in the Operational state. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.6 | Integer32 (1..32) | read-create | current |
| hwImaGroupTxTimingRefLink OBJECT-TYPE The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the transmit timing reference link has not yet been selected. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.7 | InterfaceIndexOrZero | read-only | current |
| hwImaGroupRxTimingRefLink OBJECT-TYPE The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the receive timing reference link has not yet been detected. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.8 | InterfaceIndexOrZero | read-only | current |
| hwImaGroupTxImaId OBJECT-TYPE The IMA ID currently in use by the near-end IMA function. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.9 | Integer32 (0..255) | read-only | current |
| hwImaGroupRxImaId OBJECT-TYPE The IMA ID currently in use by the far-end IMA function. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.10 | Integer32 (0..255) | read-only | current |
| hwImaGroupTxFrameLength OBJECT-TYPE The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.11 | ImaFrameLength | read-create | current |
| hwImaGroupRxFrameLength OBJECT-TYPE Value of IMA frame length as received from remote IMA function. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.12 | ImaFrameLength | read-only | current |
| hwImaGroupDiffDelayMax OBJECT-TYPE The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.13 | MilliSeconds (25..120) | read-create | current |
| hwImaGroupAlphaValue OBJECT-TYPE This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.14 | Integer32 (1..2) | read-only | current |
| hwImaGroupBetaValue OBJECT-TYPE This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.15 | Integer32 (1..5) | read-only | current |
| hwImaGroupGammaValue OBJECT-TYPE This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreSync state. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.16 | Integer32 (1..5) | read-only | current |
| hwImaGroupNumTxActLinks OBJECT-TYPE The number of links which are configured to transmit and are currently Active in this IMA group. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.17 | Gauge32 | read-only | current |
| hwImaGroupNumRxActLinks OBJECT-TYPE The number of links which are configured to receive and are currently Active in this IMA group. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.18 | Gauge32 | read-only | current |
| hwImaGroupTxOamLabelValue OBJECT-TYPE IMA OAM Label value transmitted by the NE IMA unit. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.19 | Integer32 (1..255) | read-only | current |
| hwImaGroupRxOamLabelValue OBJECT-TYPE IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.20 | Integer32 (0..255) | read-only | current |
| hwImaGroupFirstLinkIfIndex OBJECT-TYPE This object identifies the first link of this IMA Group. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.21 | InterfaceIndex | read-only | current |
| hwImaGroupName OBJECT-TYPE The name of interface ImaGroup. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.22 | OCTET STRING | accessible-for-notify | current |
| hwImaGroupTxClock OBJECT-TYPE The clock mode to be used by the IMA group in the transmit direction. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.23 | Integer32 (1..2) | read-create | current |
| hwImaGroupRxClock OBJECT-TYPE Mode of IMA clock as received from remote IMA function. | 1.3.6.1.4.1.2011.5.25.176.1.1.1.24 | Integer32 (1..2) | read-only | current |
| hwImaLinkTable OBJECT-TYPE The IMA group Link Status and Configuration table. | 1.3.6.1.4.1.2011.5.25.176.1.2 | not-accessible | current | |
| hwImaLinkEntry OBJECT-TYPE An entry in the IMA Group Link table. | 1.3.6.1.4.1.2011.5.25.176.1.2.1 | not-accessible | current | |
| hwImaLinkIfIndex OBJECT-TYPE This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') assigned to this IMA link. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.1 | InterfaceIndex | not-accessible | current |
| hwImaLinkGroupIfIndex OBJECT-TYPE This object identifies the logical interface number ('ifIndex') assigned to this IMA group. The specified link will be bound to this IMA group. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.2 | InterfaceIndex | read-create | current |
| hwImaLinkNeTxState OBJECT-TYPE The current state of the near-end transmit link. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.3 | ImaLinkState | read-only | current |
| hwImaLinkNeRxState OBJECT-TYPE The current state of the near-end receive link. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.4 | ImaLinkState | read-only | current |
| hwImaLinkFeTxState OBJECT-TYPE The current state of the far-end transmit link as reported via ICP cells. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.5 | ImaLinkState | read-only | current |
| hwImaLinkFeRxState OBJECT-TYPE The current state of the far-end receive link as reported via ICP cells. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.6 | ImaLinkState | read-only | current |
| hwImaLinkRowStatus OBJECT-TYPE The hwImaLinkRowStatus object allows create, change, and delete operations on hwImaLinkTable entries. To create a new conceptual row (or instance) of the hwImaLinkTable, hwImaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the imaLinkGroupIndex object must be performed before the hwImaLinkRowStatus of a new conceptual row can be set to 'active'. To change (modify) the imaLinkGroupIndex in an hwImaLinkTable entry, the hwImaLinkRowStatus object must first be set to 'notInService'. Only then can this object in the conceptual row be modified. This is due to the fact that the imaLinkGroupIndex object provides the association between a physical IMA link and the IMA group to which it belongs, and setting the imaLinkGroupIndex object to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the hwImaLinkRowStatus object is set to 'active'. While the row is not in 'active' state, both the Transmit and Receive IMA link state machines are in the 'Not In Group' state. To remove (delete) an hwImaLinkTable entry from this table, set this object to 'destroy'. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.51 | RowStatus | read-create | current |
| hwImaLinkName OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.2.1.52 | OCTET STRING | accessible-for-notify | current |
| hwImaAlarmTable OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3 | not-accessible | current | |
| hwImaAlarmEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1 | not-accessible | current | |
| hwImaAlarmIfIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.1 | Integer32 | not-accessible | current |
| hwImaGroupNeDownEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.2 | Integer32 | read-write | current |
| hwImaGroupFeDownEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.3 | Integer32 | read-write | current |
| hwImaGroupTxClkMismatchEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.4 | Integer32 | read-write | current |
| hwImaLinkLifEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.5 | Integer32 | read-write | current |
| hwImaLinkLodsEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.6 | Integer32 | read-write | current |
| hwImaLinkRfiEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.7 | Integer32 | read-write | current |
| hwImaLinkFeTxUnusableEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.8 | Integer32 | read-write | current |
| hwImaLinkFeRxUnusableEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.9 | Integer32 | read-write | current |
| hwIMAAllEn OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.176.1.3.1.10 | Integer32 | read-write | current |
| hwImaMibConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.176.2 | |||
| hwImaMibGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.176.2.1 | |||
| hwImaMibCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.176.2.2 | |||
| hwImaNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.176.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| hwImaGroupNeDownAlarm NOTIFICATION-TYPE The alarm indicating the failure in the local IMA group is generated. | 1.3.6.1.4.1.2011.5.25.176.3.1 | current |
| hwImaGroupNeDownAlarmResume NOTIFICATION-TYPE The alarm indicating the failure in the local IMA group is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.2 | current |
| hwImaGroupFeDownAlarm NOTIFICATION-TYPE The alarm indicating the failure in the remote IMA group is generated. | 1.3.6.1.4.1.2011.5.25.176.3.3 | current |
| hwImaGroupFeDownAlarmResume NOTIFICATION-TYPE The alarm indicating the failure in the remote IMA group is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.4 | current |
| hwImaGroupTxClkMismatch NOTIFICATION-TYPE The alarm indicating that the clock mode sent by the local IMA group does not match that sent by the remote IMA group is generated. | 1.3.6.1.4.1.2011.5.25.176.3.5 | current |
| hwImaGroupTxClkMismatchResume NOTIFICATION-TYPE The alarm indicating that the clock mode sent by the local IMA group does not match that sent by the remote IMA group is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.6 | current |
| hwImaLinkLifAlarm NOTIFICATION-TYPE The alarm indicating that the IMA link is out of frame is generated. | 1.3.6.1.4.1.2011.5.25.176.3.7 | current |
| hwImaLinkLifAlarmResume NOTIFICATION-TYPE The alarm indicating the IMA link is out of frame is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.8 | current |
| hwImaLinkLodsAlarm NOTIFICATION-TYPE The alarm indicating that the IMA link differential delay exceeds the threshold is generated. | 1.3.6.1.4.1.2011.5.25.176.3.9 | current |
| hwImaLinkLodsAlarmResume NOTIFICATION-TYPE The alarm indicating that the IMA link differential delay exceeds the threshold is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.10 | current |
| hwImaLinkRfiAlarm NOTIFICATION-TYPE The alarm indicating the failure in the remote IMA link is generated. | 1.3.6.1.4.1.2011.5.25.176.3.11 | current |
| hwImaLinkRfiAlarmResume NOTIFICATION-TYPE The alarm indicating the failure in the remote IMA link is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.12 | current |
| hwImaLinkFeTxUnusableAlarm NOTIFICATION-TYPE The alarm indicating that the remote IMA link cannot be used to send packets is generated. | 1.3.6.1.4.1.2011.5.25.176.3.13 | current |
| hwImaLinkFeTxUnusableAlarmResume NOTIFICATION-TYPE The alarm indicating that the remote IMA link cannot be used to send packets is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.14 | current |
| hwImaLinkFeRxUnusableAlarm NOTIFICATION-TYPE The alarm indicating that the remote IMA link cannot be used to receive packets is generated. | 1.3.6.1.4.1.2011.5.25.176.3.15 | current |
| hwImaLinkFeRxUnusableAlarmResume NOTIFICATION-TYPE The alarm indicating that the remote IMA link cannot be used to receive packets is cleared. | 1.3.6.1.4.1.2011.5.25.176.3.16 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hwImaGroupGroup OBJECT-GROUP A set of objects providing configuration and status information for an IMA group definition. | 1.3.6.1.4.1.2011.5.25.176.2.1.1 | current |
| hwImaLinkGroup OBJECT-GROUP A set of objects providing status information for an IMA link. | 1.3.6.1.4.1.2011.5.25.176.2.1.2 | current |
| hwImaGroupAlarmTrapGroup NOTIFICATION-GROUP A set of NOTIFICATION providing alarm information for an IMA group. | 1.3.6.1.4.1.2011.5.25.176.2.1.3 | current |
| hwImaLinkAlarmTrapGroup NOTIFICATION-GROUP A set of NOTIFICATION providing alarm information for an IMA link. | 1.3.6.1.4.1.2011.5.25.176.2.1.4 | current |
| hwImaMibCompliance MODULE-COMPLIANCE The compliance statement for network elements implementing Inverse Multiplexing for ATM (IMA) interfaces. | 1.3.6.1.4.1.2011.5.25.176.2.2.1 | current |