HPN-ICF-LSW-DEV-ADM-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.8.35.18
- Last updated
- 2009-03-19 00:00
- Revisions
- 2001-04-04 00:00
- Namespace
- hp
- Source file
HPN-ICF-LSW-DEV-ADM-MIB- Digest
sha256:171dd803a9ed04520b467fad16f2c0d76132d801213540ec14a5da175e5690ce
Description
The latest baseline.
Imports
| From | Symbols |
|---|---|
| HCNUM-TC | CounterBasedGauge64 |
| HPN-ICF-OID-MIB | hpnicflswCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, TEXTUAL-CONVENTION |
Imported by
4 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HCNUM-TC HPN-ICF-LSW-DEV-ADM-MIB HPN-ICF-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HpnicfLswTypeOfSlot TEXTUAL-CONVENTION The type of slots for lan switch devices. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfLswSystemPara OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1 | |||
| hpnicfLswSysIpAddr OBJECT-TYPE System IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.1 | IpAddress | read-only | current |
| hpnicfLswSysIpMask OBJECT-TYPE Mask of the system IP address. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.2 | IpAddress | read-only | current |
| hpnicfLswSysCpuRatio OBJECT-TYPE CPU usage of the system in accuracy of 1%, and the range of value is 1 to 100. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.3 | Integer32 (0..100) | read-only | current |
| hpnicfLswSysVersion OBJECT-TYPE Information of the system version. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.4 | DisplayString (SIZE(1..64)) | read-only | current |
| hpnicfLswSysTime OBJECT-TYPE System time. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.5 | DateAndTime | read-write | current |
| hpnicfLswSysUNMCastDropEnable OBJECT-TYPE Enable or disable discarding of unknown multicast packet. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.6 | INTEGER {disable(0), enable(1)} | read-write | current |
| hpnicfLswSysManagementVlan OBJECT-TYPE System management VLAN. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.7 | Integer32 (1..4094) | read-write | current |
| hpnicfLswSysVlanRange OBJECT-TYPE System VLAN range, if set VLAN range, must bind mangement IP/Mask. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.8 | DisplayString (SIZE(1..10)) | read-write | current |
| hpnicfLswSysManagementIpAddr OBJECT-TYPE System IP address. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.9 | IpAddress | read-write | current |
| hpnicfLswSysManagementIpMask OBJECT-TYPE Mask of the system IP address. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.10 | IpAddress | read-write | current |
| hpnicfMacAddressCountPort OBJECT-TYPE Supportted MAC address number on port. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.11 | Integer32 | read-only | current |
| hpnicfMacAddressCountMachine OBJECT-TYPE Supportted MAC address number on machine. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.12 | Integer32 | read-only | current |
| hpnicfLswSysPhyMemory OBJECT-TYPE The memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.13 | Unsigned32 | read-only | current |
| hpnicfLswSysMemory OBJECT-TYPE The memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.14 | Unsigned32 | read-only | current |
| hpnicfLswSysMemoryUsed OBJECT-TYPE The system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.15 | Unsigned32 | read-only | current |
| hpnicfLswSysMemoryRatio OBJECT-TYPE The percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hpnicfLswSysMemoryUsed hpnicfLswSysMemoryRatio = -------------------- hpnicfLswSysMemory For the distributed device, it represents the memory used ratio on the master slot. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.16 | Unsigned32 (0..100) | read-only | current |
| hpnicfLswSysTemperature OBJECT-TYPE The temperature of system. For the distributed device, it represents the temperature on the master slot. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.17 | Integer32 | read-only | current |
| hpnicfLswSysPhyMemRev OBJECT-TYPE Size of the memory space for the software platform. This node is used to replace hpnicfLswSysPhyMemory. For a distributed device, it indicates the size of the memory space on the active MPU. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.18 | CounterBasedGauge64 | read-only | current |
| hpnicfLswSysMemRev OBJECT-TYPE Size of the physical memory space. This node is used to replace hpnicfLswSysMemory. For a distributed device, it indicates the size of the memory space on the active MPU. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.19 | CounterBasedGauge64 | read-only | current |
| hpnicfLswSysMemUsedRev OBJECT-TYPE Size of the memory space used by the software system. This node is used to replace hpnicfLswSysMemoryUsed. For a distributed device, it indicates the size of the memory space on the active MPU | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.20 | CounterBasedGauge64 | read-only | current |
| hpnicfLswSlotConf OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4 | |||
| hpnicfLswFrameTable OBJECT-TYPE Frame information table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2 | not-accessible | current | |
| hpnicfLswFrameEntry OBJECT-TYPE Frame description table entry. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1 | not-accessible | current | |
| hpnicfLswFrameIndex OBJECT-TYPE The unique index of frame. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.1 | Integer32 | read-only | current |
| hpnicfLswFrameType OBJECT-TYPE Frame type. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.2 | Integer32 | read-only | current |
| hpnicfLswFrameDesc OBJECT-TYPE Frame description. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.3 | DisplayString (SIZE(0..64)) | read-write | current |
| hpnicfLswSlotNumber OBJECT-TYPE Number of slots of the current frame. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.4 | Integer32 | read-only | current |
| hpnicfLswFrameAdminStatus OBJECT-TYPE The Status of frame. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.5 | INTEGER {normal(1), fault(2), other(3)} | read-only | current |
| hpnicfLswSlotTable OBJECT-TYPE Slot description table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3 | not-accessible | current | |
| hpnicfLswSlotEntry OBJECT-TYPE Slot description table entry. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1 | not-accessible | current | |
| hpnicfLswSlotIndex OBJECT-TYPE Slot index. When the slot is empty, listed as vacant slot. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.1 | Integer32 | read-only | current |
| hpnicfLswSlotType OBJECT-TYPE Slot type. BOM number is recommended. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.2 | HpnicfLswTypeOfSlot | read-only | current |
| hpnicfLswSlotDesc OBJECT-TYPE Slot description. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.3 | DisplayString (SIZE(0..64)) | read-write | current |
| hpnicfLswSlotCpuRatio OBJECT-TYPE CPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.4 | Integer32 | read-only | current |
| hpnicfLswSlotPcbVersion OBJECT-TYPE Hardware version of the board. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.5 | DisplayString (SIZE(0..64)) | read-only | current |
| hpnicfLswSlotSoftwareVersion OBJECT-TYPE Software version of the board. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.6 | DisplayString (SIZE(0..64)) | read-only | current |
| hpnicfLswSubslotNumber OBJECT-TYPE Number of the cards of the board. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.7 | Integer32 | read-only | current |
| hpnicfLswSlotAdminStatus OBJECT-TYPE Slot status. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.8 | INTEGER {not-install(1), normal(2), fault(3), forbidden(4)} | read-only | current |
| hpnicfLswSlotOperStatus OBJECT-TYPE Slot operation status. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.9 | INTEGER {disable(1), enable(2), reset(3), test(4)} | read-write | current |
| hpnicfLswSlotPhyMemory OBJECT-TYPE The memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.10 | Unsigned32 | read-only | current |
| hpnicfLswSlotMemory OBJECT-TYPE The memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.11 | Unsigned32 | read-only | current |
| hpnicfLswSlotMemoryUsed OBJECT-TYPE The system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.12 | Unsigned32 | read-only | current |
| hpnicfLswSlotMemoryRatio OBJECT-TYPE The percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.13 | Unsigned32 (0..100) | read-only | current |
| hpnicfLswSlotTemperature OBJECT-TYPE The temperature of system on the board. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.14 | Integer32 | read-only | current |
| hpnicfLswSlotPktBufFree OBJECT-TYPE The number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.15 | Integer32 | read-only | current |
| hpnicfLswSlotPktBufInit OBJECT-TYPE The number of packet buffers allocated when the switch booted. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.16 | Integer32 | read-only | current |
| hpnicfLswSlotPktBufMin OBJECT-TYPE The smallest number of packet buffers available since the switch booted. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.17 | Integer32 | read-only | current |
| hpnicfLswSlotPktBufMiss OBJECT-TYPE The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.18 | Counter64 | read-only | current |
| hpnicfLswSlotRunTime OBJECT-TYPE Runtime of board. For example, if a board has run for 2 days 4 hours and 20 minutes, its runtime is displayed as 0 weeks, 2 days, 4 hours, 20 minutes. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.19 | DisplayString (SIZE(0..64)) | read-only | current |
| hpnicfLswSlotPhyMemRev OBJECT-TYPE Size of the memory on the board. This node is used to replace hpnicfLswSlotPhyMemory. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.20 | CounterBasedGauge64 | read-only | current |
| hpnicfLswSlotMemRev OBJECT-TYPE Size of the memory space for the software system on the board. This node is used to replace hpnicfLswSlotMemory. Note that the system memory means the memory can be used by the software platform. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.21 | CounterBasedGauge64 | read-only | current |
| hpnicfLswSlotMemUsedRev OBJECT-TYPE Size of the memory space used by the software system on the board. This node is used to replace hpnicfLswSlotMemoryUsed. Note that the system memory means the memory can be used by the software platform. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.22 | CounterBasedGauge64 | read-only | current |
| hpnicfLswSlotModelDesc OBJECT-TYPE Model of the extended device in a slot. Examples of extended devices include PEXs and firewall modules. If the device in the slot is not an extended device, a zero-length string is returned. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.23 | DisplayString (SIZE(0..255)) | read-only | current |
| hpnicfLswSubslotTable OBJECT-TYPE Subslot description table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4 | not-accessible | current | |
| hpnicfLswSubslotEntry OBJECT-TYPE Subslot description table entry. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1 | not-accessible | current | |
| hpnicfLswSubslotIndex OBJECT-TYPE Subslot index. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.1 | Integer32 | read-only | current |
| hpnicfLswSubslotType OBJECT-TYPE Type of the pinch board in the subslot. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.2 | HpnicfLswTypeOfSlot | read-only | current |
| hpnicfLswSubslotPortNum OBJECT-TYPE Number of physical ports in the pinch board. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.3 | Integer32 | read-only | current |
| hpnicfLswSubslotAdminStatus OBJECT-TYPE Status of the pinch board in the subslot. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.4 | INTEGER {not-install(1), normal(2), fault(3), forbidden(4)} | read-only | current |
| hpnicfLswSubslotFirstIfIndex OBJECT-TYPE The value of ifIndex of the first physical port in the pinch board. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.5 | Integer32 | read-only | current |
| hpnicfLswPortTable OBJECT-TYPE Port configuration table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5 | not-accessible | current | |
| hpnicfLswPortEntry OBJECT-TYPE Port configuration table entry. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1 | not-accessible | current | |
| hpnicfLswPortIndex OBJECT-TYPE The port number on the device. The first port number is 1, which is reserved if the port does not exist. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.1 | Integer32 | read-only | current |
| hpnicfLswPortType OBJECT-TYPE Normally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.2 | INTEGER {type-NULL(0), type-10OR100M(1), type-1000BASE-LX-SM(2), type-1000BASE-SX-MM(3), type-1000BASE-TX(4), type-100M-SINGLEMODE-FX(5), type-100M-MULTIMODE-FX(6), type-100M-100BASE-TX(7), type-100M-HUB(8), type-VDSL(9), type-STACK(10), type-1000BASE-ZENITH-FX(11), type-1000BASE-LONG-FX(12), type-ADSL(13), type-10OR100M-db(14), type-10GBASE-LR-SM(15), type-10GBASE-LX4-MM(16), type-10GBASE-LX4-SM(17), type-100M-LONG-FX(18), type-1000BASE-CX(19), type-1000BASE-ZENITH-FX-LC(20), type-1000BASE-LONG-FX-LC(21), type-100M-SM-FX-SC(22), type-100M-MM-FX-SC(23), type-100M-SM-FX-LC(24), type-100M-MM-FX-LC(25), type-GBIC-NO-CONNECTOR(26), type-GBIC-1000-BASE-T(27), type-GBIC-1000-BASE-LX(28), type-GBIC-1000-BASE-SX(29), type-GBIC-1000-BASE-ZX(30), type-COMBO-NO-CONNECTOR(31), type-COMBO-1000-BASE-LX(32), type-COMBO-1000-BASE-LX-FIBER(33), type-COMBO-1000-BASE-LX-COPPER(34), type-COMBO-1000-BASE-SX(35), type-COMBO-1000-BASE-SX-FIBER(36), type-COMBO-1000-BASE-SX-COPPER(37), type-COMBO-1000-BASE-ZX(38), type-COMBO-1000-BASE-ZX-FIBER(39), type-COMBO-1000-BASE-ZX-COPPER(40), type-155-POS-SX-MMF(41), type-155-POS-LX-SMF(42), type-1000BASE-T(43), type-1000BASE-SX-SFP(44), type-1000BASE-LX-SFP(45), type-1000BASE-T-AN-SFP(46), type-10GBASE-LX4-XENPAK(47), type-10GBASE-LR-XENPAK(48), type-10GBASE-CX4(49), type-1000BASE-ZX-SFP(50), type-1000BASE-MM-SFP(51), type-100BASE-SX-SFP(52), type-100BASE-LX-SFP(53), type-100BASE-T-AN-SFP(54), type-100BASE-ZX-SFP(55), type-100BASE-MM-SFP(56), type-SFP-NO-CONNECTOR(57), type-SFP-UNKNOWN-CONNECTOR(58), type-POS-NO-CONNECTOR(59), type-10G-BASE-SR(60), type-10G-BASE-ER(61), type-10G-BASE-LX4(62), type-10G-BASE-SW(63), type-10G-BASE-LW(64), type-10G-BASE-EW(65), type-10G-LR-SM-LC(66), type-10G-SR-MM-LC(67), type-10G-ER-SM-LC(68), type-10G-LW-SM-LC(69), type-10G-SW-MM-LC(70), type-10G-EW-SM-LC(71), type-100BASE-SM-MTRJ(72), type-100BASE-MM-MTRJ(73), type-XFP-NO-CONNECTOR(74), type-XFP-10GBASE-SR(75), type-XFP-10GBASE-LR(76), type-XFP-10GBASE-ER(77), type-XFP-10GBASE-SW(78), type-XFP-10GBASE-LW(79), type-XFP-10GBASE-EW(80), type-XFP-10GBASE-CX4(81), type-XFP-10GBASE-LX4(82), type-XFP-UNKNOWN(83), type-XPK-NOCONNECTOR(84), type-XPK-10GBASE-SR(85), type-XPK-10GBASE-LR(86), type-XPK-10GBASE-ER(87), type-XPK-10GBASE-SW(88), type-XPK-10GBASE-LW(89), type-XPK-10GBASE-EW(90), type-XPK-10GBASE-CX4(91), type-XPK-10GBASE-LX4(92), type-XPK-UNKNOWN(93), type-POS-OC48-SR-SM-LC(94), type-POS-OC48-IR-SM-LC(95), type-POS-OC48-LR-SM-LC(96), type-10G-BASE-CX4(97), type-OLT-1000BASE-BX-SFF-SC(98), type-ONU-1000BASE-BX-SFF-SC(99), type-24G-CASCADE(100), type-POS-OC3-SR-MM(101), type-POS-OC3-IR-SM(102), type-POS-OC3-IR-1-SM(103), type-POS-OC3-IR-2-SM(104), type-POS-OC3-LR-SM(105), type-POS-OC3-LR-1-SM(106), type-POS-OC3-LR-2-SM(107), type-POS-OC3-LR-3-SM(108), type-POS-OC12-SR-MM(109), type-POS-OC12-IR-SM(110), type-POS-OC12-IR-1-SM(111), type-POS-OC12-IR-2-SM(112), type-POS-OC12-LR-SM(113), type-POS-OC12-LR-1-SM(114), type-POS-OC12-LR-2-SM(115), type-POS-OC12-LR-3-SM(116), type-POS-OC48-SR-SM(117), type-POS-OC48-IR-SM(118), type-POS-OC48-IR-1-SM(119), type-POS-OC48-IR-2-SM(120), type-POS-OC48-LR-SM(121), type-POS-OC48-LR-1-SM(122), type-POS-OC48-LR-2-SM(123), type-POS-OC48-LR-3-SM(124), type-POS-I-64-1(125), type-POS-I-64-2(126), type-POS-I-64-3(127), type-POS-I-64-5(128), type-POS-S-64-1(129), type-POS-S-64-2(130), type-POS-S-64-3(131), type-POS-S-64-5(132), type-POS-L-64-1(133), type-POS-L-64-2(134), type-POS-L-64-3(135), type-POS-V-64-2(136), type-POS-V-64-3(137), type-100BASE-FX-BIDI(138), type-100BASE-BX10-U-SFP(139), type-100BASE-BX10-D-SFP(140), type-1000BASE-BX10-U-SFP(141), type-1000BASE-BX10-D-SFP(142), type-STK-1000BASE-T(143), type-RPR-PHYPOS-CONNECTOR(144), type-RPR-PHY10GE-CONNECTOR(145), type-RPR-LOGICPOS-CONNECTOR(146), type-RPR-LOGIC10GE-CONNECTOR(147), type-10GBASE-ZR(148), type-TYPE-ERROR-CONNECTOR(149), type-10G-STACK(150), type-155-ATM-SX-MMF(151), type-155-ATM-LX-SMF(152), type-622-ATM-SX-MMF(153), type-622-ATM-LX-SMF(154), type-155-ATM-NO-CONNECTOR(155), type-622-ATM-NO-CONNECTOR(156), type-155-CPOS-E1-NO-CONNECTOR(157), type-155-CPOS-T1-NO-CONNECTOR(158), type-622-CPOS-E1-NO-CONNECTOR(159), type-622-CPOS-T1-NO-CONNECTOR(160), type-155-CPOS-E1-SX-MMF(161), type-155-CPOS-T1-SX-MMF(162), type-155-CPOS-E1-LX-SMF(163), type-155-CPOS-T1-LX-SMF(164), type-622-CPOS-E1-SX-MMF(165), type-622-CPOS-T1-SX-MMF(166), type-622-CPOS-E1-LX-SMF(167), type-622-CPOS-T1-LX-SMF(168), type-E1-CONNECTOR(169), type-T1-CONNECTOR(170), type-1000BASE-STK-SFP(171), type-1000BASE-BIDI-SFP(172), type-1000BASE-CWDM-SFP(173), type-100BASE-BIDI-SFP(174), type-OLT-1000BASE-PX-SFP(175), type-OLT-1000BASE-NO-CONNECTOR(176), type-RPR-PHYGE-CONNECTOR(177), type-RPR-LOGICGE-CONNECTOR(178), type-100M-1550-BIDI(179), type-100M-1310-BIDI(180), type-RPR-PHYOC48-CONNECTOR(181), type-RPR-LOGICOC48-CONNECTOR(182), type-100-1000-BASE-LX-SMF(183), type-10G-ZW-SM-LC(184), type-10G-ZR-SM-LC(185), type-XPK-10GBASE-ZR(186), type-SGMII-100-BASE-LX-SFP(187), type-SGMII-100-BASE-FX-SFP(188), type-WLAN-RADIO(189), type-SFP-PLUS-NO-CONNECTOR(191), type-SFP-PLUS-10GBASE-SR(192), type-SFP-PLUS-10GBASE-LR(193), type-SFP-PLUS-10GBASE-LRM(194), type-SFP-PLUS-10GBASE-Cu(195), type-SFP-PLUS-UNKNOWN(196), type-SFP-PLUS-STACK-CONNECTOR(197), type-POS-L-64-4(198), type-MINISAS-HD-STACK-CONNECTOR(199), type-ONU-1000BASE-PX-SFF(200), type-RS485(201), type-SFP-PLUS-10GBASE-ER(202), type-SFP-PLUS-10GBASE-ZR(203), type-XFP-10GBASE-ZR(204), type-QSFP-PLUS-40GBASE-SR4(205), type-QSFP-PLUS-STACK-CONNECTOR(206), type-QSFP-PLUS-TO-4SFP-PLUS-STACK-CONNECTOR(207), type-SFP-STACK-CONNECTOR(208), type-QSFP-NO-CONNECTOR(209), type-10GBase-T(210), type-CFP-NO-CONNECTOR(211), type-CFP-40GBASE-LR4(212), type-QSFP-PLUS-NO-CONNECTOR(213), type-QSFP-PLUS-40GBASE-LR4(214), type-CFP-40GBASE-SR4(215), type-CFP-100GBASE-LR4(216), type-CFP-100GBASE-SR10(217), type-CXP-100GBASE-SR10(218), type-CXP-NO-CONNECTOR(219), type-TRANSCEIVER-UNKNOWN(220), type-QSFP-PLUS-UNKNOWN(221), type-CFP-UNKNOWN(222), type-QSFP-PLUS-40GBASE-CSR4(223), type-CFP-40GBASE-ER4(224), type-SFP-1000BASE-BIDI(225), type-SFP-PLUS-10GBASE-ZR-DWDM(226), type-QSFP-PLUS-40GBASE-PSM(227), type-SFP-8GFC-SW(228), type-SFP-8GFC-LW(229), type-CXP-100GBASE-AOC(230), type-QSFP-PLUS-ACTIVE-STACK-CONNECTOR(231), type-QSFP-PLUS-TO-4SFP-PLUS-ACTIVE-STACK-CONNECTOR(232)} | read-only | current |
| hpnicfLswPortIfindex OBJECT-TYPE The value of ifIndex of the port. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.3 | Integer32 | read-only | current |
| hpnicfLswPortIsPlugged OBJECT-TYPE Port is plugged or not. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.4 | INTEGER {unplugged(0), plugged(1)} | read-only | current |
| hpnicfLswPortLoopbackTable OBJECT-TYPE Port loopback test table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6 | not-accessible | current | |
| hpnicfLswPortLoopbackEntry OBJECT-TYPE Port loopback test table entry. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1 | not-accessible | current | |
| hpnicfLswPortLoopbackIsSupport OBJECT-TYPE The loopback type can be supported by current port. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.1 | INTEGER {neither(1), both(2), internalOnly(3), externalOnly(4)} | read-only | current |
| hpnicfLswPortLoopbackOperate OBJECT-TYPE Port loopback operate type. Read operation not supported. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.2 | INTEGER {stopRemoteOrLocalLoopBack(0), internalLoopback(1), externalLoopback(2), remoteLoopback(3), localLoopback(4)} | read-write | current |
| hpnicfLswPortLoopbackResult OBJECT-TYPE Loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.3 | INTEGER {testing(0), testok(1), testfailed(2)} | read-only | current |
| hpnicfLswPortLoopbackAutoStopSupport OBJECT-TYPE Whether this port support NEED-MANNUL-NOLOOP mode or not. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.4 | INTEGER {support(1), notSupport(2)} | read-only | current |
| hpnicfLswPortLoopbackRemoteResult OBJECT-TYPE The remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.5 | INTEGER {loopbackTestInit(0), loopbackTesting(1), loopbackTestSuccessed(2), loopbackTestFailed(3), loopbackTestTestAndFailed(4)} | read-write | current |
| hpnicfLswPortLoopbackLocalResult OBJECT-TYPE The local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.6 | INTEGER {loopbackTestInit(0), loopbackTesting(1), loopbackTestSuccessed(2), loopbackTestFailed(3), loopbackTestTestAndFailed(4)} | read-write | current |
| hpnicfLswPortLoopbackInternalResult OBJECT-TYPE The internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.7 | INTEGER {loopbackTestInit(0), loopbackTesting(1), loopbackTestSuccessed(2), loopbackTestFailed(3), loopbackTestTestAndFailed(4)} | read-write | current |
| hpnicfLswPortLoopbackExternalResult OBJECT-TYPE The external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.8 | INTEGER {loopbackTestInit(0), loopbackTesting(1), loopbackTestSuccessed(2), loopbackTestFailed(3), loopbackTestTestAndFailed(4)} | read-write | current |
| hpnicfLswFabricTable OBJECT-TYPE This table contains the information of fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7 | not-accessible | current | |
| hpnicfLswFabricEntry OBJECT-TYPE An entry in hpnicfLswFabricTable. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1 | not-accessible | current | |
| hpnicfLswFabricChannelIndex OBJECT-TYPE The channel number of fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.1 | Integer32 | not-accessible | current |
| hpnicfLswFabricUtilIn OBJECT-TYPE Ingress utilization of fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.2 | Integer32 (0..100) | read-only | current |
| hpnicfLswFabricUtilOut OBJECT-TYPE Egress utilization of fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.3 | Integer32 (0..100) | read-only | current |
| hpnicfLswFabricPeakIn OBJECT-TYPE Ingress peak of utilization for fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.4 | Integer32 (0..100) | read-only | current |
| hpnicfLswFabricPeakInTime OBJECT-TYPE Ingress peak time of utilization for fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.5 | DateAndTime | read-only | current |
| hpnicfLswFabricPeakOut OBJECT-TYPE Egress peak of utilization for fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.6 | Integer32 (0..100) | read-only | current |
| hpnicfLswFabricPeakOutTime OBJECT-TYPE Egress peak time of utilization for fabric. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.7 | DateAndTime | read-only | current |
| hpnicfLswNetworkHealthMonitor OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.8 | |||
| hpnicfLswExtendModelTable OBJECT-TYPE This table contains the extended device models supported by the device. Examples of extended devices include PEXs and firewall modules. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9 | not-accessible | current | |
| hpnicfLswExtendModelEntry OBJECT-TYPE This entry contains information about an extended device model. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1 | not-accessible | current | |
| hpnicfLswExtendModelIndex OBJECT-TYPE Index of the extended device model. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| hpnicfLswExtendModelDesc OBJECT-TYPE Extended device model. Examples of extended devices include PEXs and firewall modules. | 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.2 | DisplayString (SIZE(0..255)) | read-only | current |