MIBs Depot

HPN-ICF-EPON-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.2.42.1
Last updated
2007-05-22 10:08
Namespace
hp
Source file
HPN-ICF-EPON-MIB
Digest
sha256:8f1cf2aab9aa1f33fa031ca826fe8c30fa6f6f4ec3af5c6af47ec650773bfff4

Description

The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..

Imports

FromSymbols
HPN-ICF-LSW-DEV-ADM-MIBhpnicfLswFrameIndex, hpnicfLswSlotIndex
HPN-ICF-OID-MIBhpnicfEpon
IF-MIBifDescr, ifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HCNUM-TC
HPN-ICF-EPON-MIB
HPN-ICF-LSW-DEV-ADM-MIB
HPN-ICF-OID-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpnicfEponSysMan
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1
hpnicfEponAutoAuthorize
OBJECT-TYPE
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1TruthValueread-writecurrent
hpnicfEponMonitorCycle
OBJECT-TYPE
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2Integer32read-writecurrent
hpnicfEponMsgTimeOut
OBJECT-TYPE
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3Integer32read-writecurrent
hpnicfEponMsgLoseNum
OBJECT-TYPE
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4Integer32read-writecurrent
hpnicfEponSysHasEPONBoard
OBJECT-TYPE
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5TruthValueread-onlycurrent
hpnicfEponMonitorCycleEnable
OBJECT-TYPE
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6TruthValueread-writecurrent
hpnicfEponOltSoftwareErrAlmEnable
OBJECT-TYPE
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7TruthValueread-writecurrent
hpnicfEponPortLoopBackAlmEnable
OBJECT-TYPE
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8TruthValueread-writecurrent
hpnicfEponMonitorCycleMinVal
OBJECT-TYPE
The lower limit of cycle which be confined to the hpnicfEponMonitorCycle.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9Integer32read-onlycurrent
hpnicfEponMonitorCycleMaxVal
OBJECT-TYPE
The upper limit of cycle which be confined to the hpnicfEponMonitorCycle.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10Integer32read-onlycurrent
hpnicfEponMsgTimeOutMinVal
OBJECT-TYPE
The lower limit of timeout which be confined to the hpnicfEponMsgTimeOut.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11Integer32read-onlycurrent
hpnicfEponMsgTimeOutMaxVal
OBJECT-TYPE
The upper limit of timeout which be confined to the hpnicfEponMsgTimeOut.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12Integer32read-onlycurrent
hpnicfEponMsgLoseNumMinVal
OBJECT-TYPE
The lower limit of time which be confined to the hpnicfEponMsgLoseNum.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13Integer32read-onlycurrent
hpnicfEponMsgLoseNumMaxVal
OBJECT-TYPE
The upper limit of time which be confined to the hpnicfEponMsgLoseNum.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14Integer32read-onlycurrent
hpnicfEponSysScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15
hpnicfEponSysManTable
OBJECT-TYPE
This table defines system related parameters.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16not-accessiblecurrent
hpnicfEponSysManEntry
OBJECT-TYPE
The entry of the table hpnicfEponSysManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1not-accessiblecurrent
hpnicfEponSlotIndex
OBJECT-TYPE
Slot Index, the index of hpnicfEponSysManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1Integer32not-accessiblecurrent
hpnicfEponModeSwitch
OBJECT-TYPE
cmode - epon standard mode. hmode - private mode.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2INTEGER {cmode(1), hmode(2)}read-writecurrent
hpnicfEponAutomaticMode
OBJECT-TYPE
Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfEponOamDiscoveryTimeout
OBJECT-TYPE
Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4Integer32read-writecurrent
hpnicfEponEncryptionNoReplyTimeOut
OBJECT-TYPE
Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5Integer32read-writecurrent
hpnicfEponEncryptionUpdateTime
OBJECT-TYPE
Encryption key update timer for all ONUs on slot, indicated by hpnicfEponSlotIndex, ranging from 1 to 255, measured in seconds.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6Integer32read-writecurrent
hpnicfEponAutoBindStatus
OBJECT-TYPE
enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfEponAutoUpdateTable
OBJECT-TYPE
EPON auto update ONU application configuration.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17not-accessiblecurrent
hpnicfEponAutoUpdateEntry
OBJECT-TYPE
The entry of the table hpnicfEponAutoUpdateTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1not-accessiblecurrent
hpnicfEponAutoUpdateFileName
OBJECT-TYPE
The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1DisplayString (SIZE(0..255))read-writecurrent
hpnicfEponAutoUpdateSchedStatus
OBJECT-TYPE
The status of schedule update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfEponAutoUpdateSchedTime
OBJECT-TYPE
The schedule update timing configuration is related to the hpnicfEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hpnicfEponAutoUpdateSchedStatus is enabled.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3OCTET STRING (SIZE(0..255))read-writecurrent
hpnicfEponAutoUpdateSchedType
OBJECT-TYPE
The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4INTEGER {daily(1), weekly(2), comingdate(3)}read-writecurrent
hpnicfEponAutoUpdateRealTimeStatus
OBJECT-TYPE
The status of real time update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfEponOuiIndexNextTable
OBJECT-TYPE
Next OUI index table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18not-accessiblecurrent
hpnicfEponOuiIndexNextEntry
OBJECT-TYPE
The entry of the table hpnicfEponOuiIndexNextTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1not-accessiblecurrent
hpnicfEponOuiIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for hpnicfEponOuiIndex when creating rows in the hpnicfEponOuiTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1Integer32read-onlycurrent
hpnicfEponOuiTable
OBJECT-TYPE
List of OUI and OAM supported by OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19not-accessiblecurrent
hpnicfEponOuiEntry
OBJECT-TYPE
The entry of the table hpnicfEponOuiTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1not-accessiblecurrent
hpnicfEponOuiIndex
OBJECT-TYPE
The index of this table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1Integer32not-accessiblecurrent
hpnicfEponOuiValue
OBJECT-TYPE
OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2OCTET STRING (SIZE(0..512))read-createcurrent
hpnicfEponOamVersion
OBJECT-TYPE
Version of OAM protocol defined by the organization denoted by OUI.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfEponOuiRowStatus
OBJECT-TYPE
The status of this table entry. Only active, createAndGo and the destory are supported.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4RowStatusread-createcurrent
hpnicfEponMulticastControlTable
OBJECT-TYPE
Multicast control global configuration.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20not-accessiblecurrent
hpnicfEponMulticastControlEntry
OBJECT-TYPE
The entry of the table hpnicfEponMulticastControlTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1not-accessiblecurrent
hpnicfEponMulticastVlanId
OBJECT-TYPE
The index of this table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1Integer32not-accessiblecurrent
hpnicfEponMulticastAddressList
OBJECT-TYPE
The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfEponMulticastStatus
OBJECT-TYPE
The status of this table entry. Only active, createAndGo and the destory are supported.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3RowStatusread-createcurrent
hpnicfEponFileName
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.2
hpnicfEponDbaUpdateFileName
OBJECT-TYPE
The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.1OCTET STRING (SIZE(0..64))read-writecurrent
hpnicfEponOnuUpdateFileName
OBJECT-TYPE
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.2OCTET STRING (SIZE(0..64))read-writecurrent
hpnicfEponOltMan
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3
hpnicfOltSysManTable
OBJECT-TYPE
This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1not-accessiblecurrent
hpnicfOltSysManEntry
OBJECT-TYPE
The entry of the table hpnicfOltSysManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1not-accessiblecurrent
hpnicfOltLaserOnTime
OBJECT-TYPE
The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1Integer32read-writecurrent
hpnicfOltLaserOffTime
OBJECT-TYPE
The laser off time of the ONUs during the discovery process, measured in TQ.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2Integer32read-writecurrent
hpnicfOltMultiCopyBrdCast
OBJECT-TYPE
true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3TruthValueread-writecurrent
hpnicfOltEnableDiscardPacket
OBJECT-TYPE
Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4TruthValueread-writecurrent
hpnicfOltSelfTest
OBJECT-TYPE
selftest(1): Test OLT to check whether it's OK.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5INTEGER {selftest(1)}read-writecurrent
hpnicfOltSelfTestResult
OBJECT-TYPE
The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6INTEGER {other(1), ok(2), fail(3)}read-onlycurrent
hpnicfOltMaxRtt
OBJECT-TYPE
Set the max Round Trip Time of this OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7Unsigned32read-writecurrent
hpnicfOltInfoTable
OBJECT-TYPE
Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hpnicfOltFirmMajorVersion, hpnicfOltFirmMinorVersion, hpnicfOltHardMajorVersion, hpnicfOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hpnicfOltAgcLockTime, hpnicfOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hpnicfOltMacAddress, hpnicfOltWorkMode)
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2not-accessiblecurrent
hpnicfOltInfoEntry
OBJECT-TYPE
The entry of the table hpnicfOltInfoTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1not-accessiblecurrent
hpnicfOltFirmMajorVersion
OBJECT-TYPE
OLT firmware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1OCTET STRINGread-onlycurrent
hpnicfOltFirmMinorVersion
OBJECT-TYPE
OLT firmware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2OCTET STRINGread-onlycurrent
hpnicfOltHardMajorVersion
OBJECT-TYPE
OLT hardware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3OCTET STRINGread-onlycurrent
hpnicfOltHardMinorVersion
OBJECT-TYPE
OLT hardware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4OCTET STRINGread-onlycurrent
hpnicfOltAgcLockTime
OBJECT-TYPE
PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5Integer32read-onlycurrent
hpnicfOltAgcCdrTime
OBJECT-TYPE
PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6Integer32read-onlycurrent
hpnicfOltMacAddress
OBJECT-TYPE
OLT MAC address.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7MacAddressread-onlycurrent
hpnicfOltWorkMode
OBJECT-TYPE
The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8INTEGER {other(1), open(2), reset(3), closed(4)}read-onlycurrent
hpnicfOltOpticalPowerTx
OBJECT-TYPE
The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9Integer32read-onlycurrent
hpnicfOltOpticalPowerRx
OBJECT-TYPE
The burst optical power received by this OLT. It measured in 0.01 dBm unit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10Integer32read-onlycurrent
hpnicfOltDbaManTable
OBJECT-TYPE
This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3not-accessiblecurrent
hpnicfOltDbaManEntry
OBJECT-TYPE
The entry of the table hpnicfOltDbaManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1not-accessiblecurrent
hpnicfOltDbaEnabledType
OBJECT-TYPE
Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1INTEGER {internal(1), external(2)}read-writecurrent
hpnicfOltDbaDiscoveryLength
OBJECT-TYPE
Discovery length in TQ units.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2Integer32read-writecurrent
hpnicfOltDbaDiscovryFrequency
OBJECT-TYPE
How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3Integer32read-writecurrent
hpnicfOltDbaCycleLength
OBJECT-TYPE
The grant cycle length in TQ units.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4Integer32read-writecurrent
hpnicfOltDbaVersion
OBJECT-TYPE
DBA version of the OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5OCTET STRINGread-onlycurrent
hpnicfOltDbaUpdate
OBJECT-TYPE
Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hpnicfEponDbaUpdateFileName.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6INTEGER {update(1)}read-writecurrent
hpnicfOltDbaUpdateResult
OBJECT-TYPE
The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7INTEGER {other(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5)}read-onlycurrent
hpnicfOltPortAlarmThresholdTable
OBJECT-TYPE
The table defines the alarm threshold of OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4not-accessiblecurrent
hpnicfOltPortAlarmThresholdEntry
OBJECT-TYPE
The entry of the table hpnicfOltPortAlarmThresholdTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1not-accessiblecurrent
hpnicfOltPortAlarmBerEnabled
OBJECT-TYPE
Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1TruthValueread-writecurrent
hpnicfOltPortAlarmBerDirect
OBJECT-TYPE
Traffic direction to monitor for BER alarm.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2INTEGER {berUplink(1), berDownlink(2), berAll(3)}read-writecurrent
hpnicfOltPortAlarmBerThreshold
OBJECT-TYPE
BER threshold exceed which the alarm is raised.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3Integer32read-writecurrent
hpnicfOltPortAlarmFerEnabled
OBJECT-TYPE
Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4TruthValueread-writecurrent
hpnicfOltPortAlarmFerDirect
OBJECT-TYPE
Traffic direction to monitor for FER alarm.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5INTEGER {ferUplink(1), ferDownlink(2), ferAll(3)}read-writecurrent
hpnicfOltPortAlarmFerThreshold
OBJECT-TYPE
Frame error rate exceed threshold then the alarm is raised.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6Integer32read-writecurrent
hpnicfOltPortAlarmLlidMismatchEnabled
OBJECT-TYPE
Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7TruthValueread-writecurrent
hpnicfOltPortAlarmLlidMismatchThreshold
OBJECT-TYPE
The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8Integer32read-writecurrent
hpnicfOltPortAlarmRemoteStableEnabled
OBJECT-TYPE
Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9TruthValueread-writecurrent
hpnicfOltPortAlarmLocalStableEnabled
OBJECT-TYPE
Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10TruthValueread-writecurrent
hpnicfOltPortAlarmRegistrationEnabled
OBJECT-TYPE
Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11TruthValueread-writecurrent
hpnicfOltPortAlarmOamDisconnectionEnabled
OBJECT-TYPE
Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12TruthValueread-writecurrent
hpnicfOltPortAlarmEncryptionKeyEnabled
OBJECT-TYPE
Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13TruthValueread-writecurrent
hpnicfOltPortAlarmVendorSpecificEnabled
OBJECT-TYPE
Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14TruthValueread-writecurrent
hpnicfOltPortAlarmRegExcessEnabled
OBJECT-TYPE
Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15TruthValueread-writecurrent
hpnicfOltPortAlarmDFEEnabled
OBJECT-TYPE
Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16TruthValueread-writecurrent
hpnicfOltLaserOnTimeMinVal
OBJECT-TYPE
The lower limit of time which is confined to hpnicfOltLaserOnTime.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.5Integer32read-onlycurrent
hpnicfOltLaserOnTimeMaxVal
OBJECT-TYPE
The upper limit of time which is confined to hpnicfOltLaserOnTime.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.6Integer32read-onlycurrent
hpnicfOltLaserOffTimeMinVal
OBJECT-TYPE
The lower limit of time which is confined to hpnicfOltLaserOffTime.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.7Integer32read-onlycurrent
hpnicfOltLaserOffTimeMaxVal
OBJECT-TYPE
The upper limit of time which is confined to hpnicfOltLaserOffTime.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.8Integer32read-onlycurrent
hpnicfOltDbaDiscoveryLengthMinVal
OBJECT-TYPE
The lower limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.9Integer32read-onlycurrent
hpnicfOltDbaDiscoveryLengthMaxVal
OBJECT-TYPE
The upper limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.10Integer32read-onlycurrent
hpnicfOltDbaDiscovryFrequencyMinVal
OBJECT-TYPE
The lower limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.11Integer32read-onlycurrent
hpnicfOltDbaDiscovryFrequencyMaxVal
OBJECT-TYPE
The upper limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.12Integer32read-onlycurrent
hpnicfOltDbaCycleLengthMinVal
OBJECT-TYPE
The lower limit of the frames which is confined to hpnicfOltDbaCycleLength.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.13Integer32read-onlycurrent
hpnicfOltDbaCycleLengthMaxVal
OBJECT-TYPE
The upper limit of the frames which is confined to hpnicfOltDbaCycleLength.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.14Integer32read-onlycurrent
hpnicfOltPortAlarmLlidMisMinVal
OBJECT-TYPE
The lower limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.15Integer32read-onlycurrent
hpnicfOltPortAlarmLlidMisMaxVal
OBJECT-TYPE
The upper limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.16Integer32read-onlycurrent
hpnicfOltPortAlarmBerMinVal
OBJECT-TYPE
The lower limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.17Integer32read-onlycurrent
hpnicfOltPortAlarmBerMaxVal
OBJECT-TYPE
The upper limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.18Integer32read-onlycurrent
hpnicfOltPortAlarmFerMinVal
OBJECT-TYPE
The lower limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.19Integer32read-onlycurrent
hpnicfOltPortAlarmFerMaxVal
OBJECT-TYPE
The upper limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.20Integer32read-onlycurrent
hpnicfOnuSilentTable
OBJECT-TYPE
This table is used for getting silent ONU information of OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21not-accessiblecurrent
hpnicfOnuSilentEntry
OBJECT-TYPE
The entry of the table hpnicfOnuSilentTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1not-accessiblecurrent
hpnicfOnuSilentMacAddr
OBJECT-TYPE
The MAC address of silent ONUs in OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1MacAddressnot-accessiblecurrent
hpnicfOnuSilentTime
OBJECT-TYPE
The aging time of a silent ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2Integer32read-onlycurrent
hpnicfOltUsingOnuTable
OBJECT-TYPE
The table containing configurations to manage ONU interface(s) based on OLT interface.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22not-accessiblecurrent
hpnicfOltUsingOnuEntry
OBJECT-TYPE
The entry of the table hpnicfOltUsingOnuTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1not-accessiblecurrent
hpnicfOltUsingOnuNum
OBJECT-TYPE
The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1Integer32 (1..64)not-accessiblecurrent
hpnicfOltUsingOnuIfIndex
OBJECT-TYPE
The ifIndex of the ONU interface.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2Integer32read-onlycurrent
hpnicfOltUsingOnuRowStatus
OBJECT-TYPE
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3RowStatusread-createcurrent
hpnicfEponOnuMan
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5
hpnicfOnuSysManTable
OBJECT-TYPE
This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1not-accessiblecurrent
hpnicfOnuSysManEntry
OBJECT-TYPE
The entry of the table hpnicfOnuSysManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1not-accessiblecurrent
hpnicfOnuEncryptMan
OBJECT-TYPE
Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1INTEGER {off(1), downlink(2), updownlink(3)}read-writecurrent
hpnicfOnuReAuthorize
OBJECT-TYPE
Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2INTEGER {reAuthorize(1)}read-writecurrent
hpnicfOnuMulticastFilterStatus
OBJECT-TYPE
true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3TruthValueread-writecurrent
hpnicfOnuDbaReportQueueSetNumber
OBJECT-TYPE
The number of queue sets reported in MPCP report frames.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4Integer32read-writecurrent
hpnicfOnuRemoteFecStatus
OBJECT-TYPE
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfOnuPortBerStatus
OBJECT-TYPE
enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfOnuReset
OBJECT-TYPE
Reboot ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7INTEGER {reset(1)}read-writecurrent
hpnicfOnuMulticastControlMode
OBJECT-TYPE
igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8INTEGER {igmpsnooping(1), multicastcontrol(2)}read-writecurrent
hpnicfOnuAccessVlan
OBJECT-TYPE
The VLAN ID assigned to untagged frames received on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9Integer32read-writecurrent
hpnicfOnuEncryptKey
OBJECT-TYPE
The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10DisplayString (SIZE(0..255))read-writecurrent
hpnicfOnuUniUpDownTrapStatus
OBJECT-TYPE
true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11TruthValueread-writecurrent
hpnicfOnuFecStatus
OBJECT-TYPE
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfOnuMcastCtrlHostAgingTime
OBJECT-TYPE
The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13Integer32read-writecurrent
hpnicfOnuMulticastFastLeaveEnable
OBJECT-TYPE
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14TruthValueread-writecurrent
hpnicfOnuPortIsolateEnable
OBJECT-TYPE
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15TruthValueread-writecurrent
hpnicfOnuLinkTestTable
OBJECT-TYPE
LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2not-accessiblecurrent
hpnicfOnuLinkTestEntry
OBJECT-TYPE
The entry of hpnicfOnuLinkTestEntry.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1not-accessiblecurrent
hpnicfOnuLinkTestFrameNum
OBJECT-TYPE
Exact number of measurement frames.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1Integer32read-writecurrent
hpnicfOnuLinkTestFrameSize
OBJECT-TYPE
Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2Integer32 (60..1514)read-writecurrent
hpnicfOnuLinkTestDelay
OBJECT-TYPE
true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3TruthValueread-writecurrent
hpnicfOnuLinkTestVlanTag
OBJECT-TYPE
true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4TruthValueread-writecurrent
hpnicfOnuLinkTestVlanPriority
OBJECT-TYPE
VLAN priority: 0-7.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5Integer32 (0..7)read-writecurrent
hpnicfOnuLinkTestVlanTagID
OBJECT-TYPE
VLAN ID: 1-4094.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6Integer32 (1..4094)read-writecurrent
hpnicfOnuLinkTestResultSentFrameNum
OBJECT-TYPE
The total number of frames sent during the link test process.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7Integer32read-onlycurrent
hpnicfOnuLinkTestResultRetFrameNum
OBJECT-TYPE
The total number of frames return back during the link test process.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8Integer32read-onlycurrent
hpnicfOnuLinkTestResultRetErrFrameNum
OBJECT-TYPE
The total number of error frames return back during the link test process.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9Integer32read-onlycurrent
hpnicfOnuLinkTestResultMinDelay
OBJECT-TYPE
The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10Integer32read-onlycurrent
hpnicfOnuLinkTestResultMeanDelay
OBJECT-TYPE
The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11Integer32read-onlycurrent
hpnicfOnuLinkTestResultMaxDelay
OBJECT-TYPE
The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12Integer32read-onlycurrent
hpnicfOnuBandWidthTable
OBJECT-TYPE
Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3not-accessiblecurrent
hpnicfOnuBandWidthEntry
OBJECT-TYPE
The entry of table hpnicfOnuBandWidthTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1not-accessiblecurrent
hpnicfOnuDownStreamBandWidthPolicy
OBJECT-TYPE
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1TruthValueread-writecurrent
hpnicfOnuDownStreamMaxBandWidth
OBJECT-TYPE
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2Integer32 (0..1000000)read-writecurrent
hpnicfOnuDownStreamMaxBurstSize
OBJECT-TYPE
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3Integer32 (0..8388480)read-writecurrent
hpnicfOnuDownStreamHighPriorityFirst
OBJECT-TYPE
true:Enable high priority frames preference. false:Disable high priority frames preference.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4TruthValueread-writecurrent
hpnicfOnuDownStreamShortFrameFirst
OBJECT-TYPE
true:Enable short frames preference. false:Disable short frames preference.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5TruthValueread-writecurrent
hpnicfOnuP2PBandWidthPolicy
OBJECT-TYPE
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6TruthValueread-writecurrent
hpnicfOnuP2PMaxBandWidth
OBJECT-TYPE
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7Integer32 (0..1000000)read-writecurrent
hpnicfOnuP2PMaxBurstSize
OBJECT-TYPE
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8Integer32 (0..8388480)read-writecurrent
hpnicfOnuP2PHighPriorityFirst
OBJECT-TYPE
true:Enable high priority frames preference. false:Disable high priority frames preference.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9TruthValueread-writecurrent
hpnicfOnuP2PShortFrameFirst
OBJECT-TYPE
true:Enable short frames preference. false:Disable short frames preference.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10TruthValueread-writecurrent
hpnicfOnuSlaManTable
OBJECT-TYPE
Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4not-accessiblecurrent
hpnicfOnuSlaManEntry
OBJECT-TYPE
The entry of table hpnicfOnuSlaManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1not-accessiblecurrent
hpnicfOnuSlaMaxBandWidth
OBJECT-TYPE
Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1Integer32read-writecurrent
hpnicfOnuSlaMinBandWidth
OBJECT-TYPE
Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2Integer32read-writecurrent
hpnicfOnuSlaBandWidthStepVal
OBJECT-TYPE
Granularity of bandwidth - measured in Kbit/s. The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should be the multiple of the value of this object.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3Integer32read-onlycurrent
hpnicfOnuSlaDelay
OBJECT-TYPE
low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4INTEGER {low(1), high(2)}read-writecurrent
hpnicfOnuSlaFixedBandWidth
OBJECT-TYPE
Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5Integer32read-writecurrent
hpnicfOnuSlaPriorityClass
OBJECT-TYPE
Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6Integer32read-writecurrent
hpnicfOnuSlaFixedPacketSize
OBJECT-TYPE
Fixed packet size - measured in byte. The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7Integer32read-writecurrent
hpnicfOnuInfoTable
OBJECT-TYPE
Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hpnicfOnuHardMajorVersion, hpnicfOnuHardMinorVersion, hpnicfOnuUniMacType) (2)Several physical capabilities of the ONU. (hpnicfOnuLaserOnTime, hpnicfOnuLaserOffTime, hpnicfOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hpnicfOnuWorkMode)
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5not-accessiblecurrent
hpnicfOnuInfoEntry
OBJECT-TYPE
The entry of the hpnicfOnuInfoTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1not-accessiblecurrent
hpnicfOnuHardMajorVersion
OBJECT-TYPE
ONU hardware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1OCTET STRINGread-onlycurrent
hpnicfOnuHardMinorVersion
OBJECT-TYPE
ONU hardware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2OCTET STRINGread-onlycurrent
hpnicfOnuSoftwareVersion
OBJECT-TYPE
ONU software version.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3OCTET STRINGread-onlycurrent
hpnicfOnuUniMacType
OBJECT-TYPE
ONU User Network Interface(UNI) port MAC type.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4INTEGER {other(1), mii(2), gmii(3), tbi(4)}read-onlycurrent
hpnicfOnuLaserOnTime
OBJECT-TYPE
The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5Integer32read-onlycurrent
hpnicfOnuLaserOffTime
OBJECT-TYPE
The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6Integer32read-onlycurrent
hpnicfOnuGrantFifoDep
OBJECT-TYPE
Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7Integer32 (1..255 | 2147483647)read-onlycurrent
hpnicfOnuWorkMode
OBJECT-TYPE
The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8INTEGER {other(1), on(2), pending(3), off(4)}read-onlycurrent
hpnicfOnuPCBVersion
OBJECT-TYPE
ONU PCB version.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9OCTET STRINGread-onlycurrent
hpnicfOnuRtt
OBJECT-TYPE
The signal round-trip-time(RTT) received.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10Unsigned32read-onlycurrent
hpnicfOnuEEPROMVersion
OBJECT-TYPE
ONU EEPROM version.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11OCTET STRINGread-onlycurrent
hpnicfOnuRegType
OBJECT-TYPE
ONU registered type.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12OCTET STRINGread-onlycurrent
hpnicfOnuHostType
OBJECT-TYPE
ONU host type.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13OCTET STRINGread-onlycurrent
hpnicfOnuDistance
OBJECT-TYPE
The distance between OLT and ONU, measured in meter.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14Integer32read-onlycurrent
hpnicfOnuLlid
OBJECT-TYPE
The link layer identifier, which uniquely identifies the ONU of a specific OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15Integer32read-onlycurrent
hpnicfOnuVendorId
OBJECT-TYPE
ONU vendor ID.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16OCTET STRINGread-onlycurrent
hpnicfOnuFirmwareVersion
OBJECT-TYPE
ONU firmware version.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17OCTET STRINGread-onlycurrent
hpnicfOnuOpticalPowerReceivedByOlt
OBJECT-TYPE
The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18Integer32read-onlycurrent
hpnicfOnuMacAddrInfoTable
OBJECT-TYPE
This table used for getting MAC address information of ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6not-accessiblecurrent
hpnicfOnuMacAddrInfoEntry
OBJECT-TYPE
The entry of the hpnicfEponOnuMacAddrInfoTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1not-accessiblecurrent
hpnicfOnuMacIndex
OBJECT-TYPE
The index of ONUs in one OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1Integer32not-accessiblecurrent
hpnicfOnuMacAddrFlag
OBJECT-TYPE
The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2INTEGER {bound(1), registered(2), run(3), regIncorrect(4)}read-onlycurrent
hpnicfOnuMacAddress
OBJECT-TYPE
The MAC address of ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3MacAddressread-onlycurrent
hpnicfOnuBindMacAddrTable
OBJECT-TYPE
This table implements the following functions for ONUs: Bind MAC of ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7not-accessiblecurrent
hpnicfOnuBindMacAddrEntry
OBJECT-TYPE
The entry of the table hpnicfOnuBindMacAddrTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1not-accessiblecurrent
hpnicfOnuBindMacAddress
OBJECT-TYPE
Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1MacAddressread-writecurrent
hpnicfOnuBindType
OBJECT-TYPE
Set the binding type with the ONU which is confined to the index of hpnicfEponOnuTypeDescr.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2Integer32read-writecurrent
hpnicfOnuFirmwareUpdateTable
OBJECT-TYPE
This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8not-accessiblecurrent
hpnicfOnuFirmwareUpdateEntry
OBJECT-TYPE
The entry of the table hpnicfOnuFirmwareUpdateTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1not-accessiblecurrent
hpnicfOnuUpdate
OBJECT-TYPE
update(1): Update the ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1INTEGER {update(1)}read-writecurrent
hpnicfOnuUpdateResult
OBJECT-TYPE
The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2INTEGER {updating(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5), fileNotMatchONU(6), timeout(7), otherError(8)}read-onlycurrent
hpnicfOnuUpdateFileName
OBJECT-TYPE
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3OCTET STRING (SIZE(0..255))read-writecurrent
hpnicfOnuLinkTestFrameNumMinVal
OBJECT-TYPE
The lower limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.9Integer32read-onlycurrent
hpnicfOnuLinkTestFrameNumMaxVal
OBJECT-TYPE
The upper limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.10Integer32read-onlycurrent
hpnicfOnuSlaMaxBandWidthMinVal
OBJECT-TYPE
The lower limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.11Integer32read-onlycurrent
hpnicfOnuSlaMaxBandWidthMaxVal
OBJECT-TYPE
The upper limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.12Integer32read-onlycurrent
hpnicfOnuSlaMinBandWidthMinVal
OBJECT-TYPE
The lower limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.13Integer32read-onlycurrent
hpnicfOnuSlaMinBandWidthMaxVal
OBJECT-TYPE
The upper limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.14Integer32read-onlycurrent
hpnicfEponOnuTypeManTable
OBJECT-TYPE
This table is used for getting ONU bind type in current version.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15not-accessiblecurrent
hpnicfEponOnuTypeManEntry
OBJECT-TYPE
The entry of the hpnicfEponOnuTypeManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1not-accessiblecurrent
hpnicfEponOnuTypeIndex
OBJECT-TYPE
The ONU type index.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1Integer32not-accessiblecurrent
hpnicfEponOnuTypeDescr
OBJECT-TYPE
The ONU type description which can be used to bind ONU in current version. the value of hpnicfOnuBindType can be configured by the index of hpnicfEponOnuTypeDescr.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2OCTET STRINGread-onlycurrent
hpnicfOnuPacketManTable
OBJECT-TYPE
This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16not-accessiblecurrent
hpnicfOnuPacketManEntry
OBJECT-TYPE
The entry of the hpnicfOnuPacketManTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1not-accessiblecurrent
hpnicfOnuPriorityTrust
OBJECT-TYPE
The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1INTEGER {dscp(1), ipprecedence(2), cos(3)}read-writecurrent
hpnicfOnuQueueScheduler
OBJECT-TYPE
The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2INTEGER {spq(1), wfq(2)}read-writecurrent
hpnicfOnuProtocolTable
OBJECT-TYPE
This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17not-accessiblecurrent
hpnicfOnuProtocolEntry
OBJECT-TYPE
The entry of hpnicfOnuProtocolTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1not-accessiblecurrent
hpnicfOnuStpStatus
OBJECT-TYPE
true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1TruthValueread-writecurrent
hpnicfOnuIgmpSnoopingStatus
OBJECT-TYPE
true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2TruthValueread-writecurrent
hpnicfOnuDhcpsnoopingOption82
OBJECT-TYPE
true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3TruthValueread-writecurrent
hpnicfOnuDhcpsnooping
OBJECT-TYPE
true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4TruthValueread-writecurrent
hpnicfOnuPppoe
OBJECT-TYPE
true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5TruthValueread-writecurrent
hpnicfOnuIgmpSnoopingHostAgingT
OBJECT-TYPE
Set the host aging time of IGMP on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6Integer32read-writecurrent
hpnicfOnuIgmpSnoopingMaxRespT
OBJECT-TYPE
Set the max response time of IGMP on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7Integer32read-writecurrent
hpnicfOnuIgmpSnoopingRouterAgingT
OBJECT-TYPE
Set the router aging time of IGMP on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8Integer32read-writecurrent
hpnicfOnuIgmpSnoopingAggReportS
OBJECT-TYPE
true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9TruthValueread-writecurrent
hpnicfOnuIgmpSnoopingAggLeaveS
OBJECT-TYPE
true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10TruthValueread-writecurrent
hpnicfOnuDot1xTable
OBJECT-TYPE
This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18not-accessiblecurrent
hpnicfOnuDot1xEntry
OBJECT-TYPE
The entry of the hpnicfOnuDot1xTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1not-accessiblecurrent
hpnicfOnuDot1xAccount
OBJECT-TYPE
ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hpnicfOnuDot1xPassword.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1OCTET STRINGread-writecurrent
hpnicfOnuDot1xPassword
OBJECT-TYPE
ONU 802.1X password. The object should be set together with hpnicfOnuDot1xAccount.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2OCTET STRINGread-writecurrent
hpnicfOnuPriorityQueueTable
OBJECT-TYPE
This table contains specific information of priority queue.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19not-accessiblecurrent
hpnicfOnuPriorityQueueEntry
OBJECT-TYPE
The entry of hpnicfOnuPriorityQueueTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1not-accessiblecurrent
hpnicfOnuQueueDirection
OBJECT-TYPE
The direction of priority queue.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hpnicfOnuQueueId
OBJECT-TYPE
The queue ID of priority queue.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2Integer32 (0..7)not-accessiblecurrent
hpnicfOnuQueueSize
OBJECT-TYPE
The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hpnicfOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3Integer32read-writecurrent
hpnicfOnuCountTable
OBJECT-TYPE
This table contains statistics of ONU port.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20not-accessiblecurrent
hpnicfOnuCountEntry
OBJECT-TYPE
The entry of hpnicfOnuCountTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1not-accessiblecurrent
hpnicfOnuInCRCErrPkts
OBJECT-TYPE
The total number of frames received with bad CRC checksum.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1Counter64read-onlycurrent
hpnicfOnuOutDroppedFrames
OBJECT-TYPE
The total number of frames dropped because of buffer failure.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2Counter64read-onlycurrent
hpnicfEponOnuScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21
hpnicfOnuPriorityQueueSizeMinVal
OBJECT-TYPE
The lower limit of queue size which is confined to hpnicfOnuQueueSize.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.1Integer32read-onlycurrent
hpnicfOnuPriorityQueueSizeMaxVal
OBJECT-TYPE
The upper limit of queue size which is confined to hpnicfOnuQueueSize.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.2Integer32read-onlycurrent
hpnicfOnuPriorityQueueBandwidthMinVal
OBJECT-TYPE
The lower limit of hpnicfOnuQueueMaxBandwidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.3Integer32read-onlycurrent
hpnicfOnuPriorityQueueBandwidthMaxVal
OBJECT-TYPE
The upper limit of hpnicfOnuQueueMaxBandwidth.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.4Integer32read-onlycurrent
hpnicfOnuPriorityQueueBurstsizeMinVal
OBJECT-TYPE
The lower limit of hpnicfOnuQueueMaxBurstsize.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.5Integer32read-onlycurrent
hpnicfOnuPriorityQueueBurstsizeMaxVal
OBJECT-TYPE
The upper limit of hpnicfOnuQueueMaxBurstsize.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.6Integer32read-onlycurrent
hpnicfOnuUpdateByTypeNextIndex
OBJECT-TYPE
Offer a free index of hpnicfOnuFirmwareUpdateByTypeTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.7Integer32read-onlycurrent
hpnicfOnuQueueBandwidthTable
OBJECT-TYPE
This table contains specific bandwidth information of ONU priority queue.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22not-accessiblecurrent
hpnicfOnuQueueBandwidthEntry
OBJECT-TYPE
The entry of hpnicfOnuQueueBandwidthTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1not-accessiblecurrent
hpnicfOnuQueueMaxBandwidth
OBJECT-TYPE
The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1Integer32read-writecurrent
hpnicfOnuQueueMaxBurstsize
OBJECT-TYPE
The maximum burst size of specific ONU priority queue, measured in 64Bytes.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2Integer32read-writecurrent
hpnicfOnuQueuePolicyStatus
OBJECT-TYPE
true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3TruthValueread-writecurrent
hpnicfOnuIpAddressTable
OBJECT-TYPE
ONU IP address table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23not-accessiblecurrent
hpnicfOnuIpAddressEntry
OBJECT-TYPE
The entry of hpnicfOnuIpAddressTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1not-accessiblecurrent
hpnicfOnuIpAddress
OBJECT-TYPE
The IP address assigned to the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1IpAddressread-writecurrent
hpnicfOnuIpAddressMask
OBJECT-TYPE
The mask of IP address denoted by hpnicfOnuIpAddress.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2IpAddressread-writecurrent
hpnicfOnuIpAddressGateway
OBJECT-TYPE
The gateway of IP address denoted by hpnicfOnuIpAddress.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3IpAddressread-writecurrent
hpnicfOnuDhcpallocate
OBJECT-TYPE
true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4TruthValueread-writecurrent
hpnicfOnuManageVID
OBJECT-TYPE
The management VLAN of ONU denoted by hpnicfOnuManageVID.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5Integer32read-writecurrent
hpnicfOnuManageVlanIntfS
OBJECT-TYPE
The management interface status of ONU denoted by hpnicfOnuManageVlanIntfS.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6TruthValueread-writecurrent
hpnicfOnuChipSetInfoTable
OBJECT-TYPE
ONU vendor specific information of ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24not-accessiblecurrent
hpnicfOnuChipSetInfoEntry
OBJECT-TYPE
The entry of hpnicfOnuChipSetInfoTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1not-accessiblecurrent
hpnicfOnuChipSetVendorId
OBJECT-TYPE
Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1OCTET STRING (SIZE(0..255))read-onlycurrent
hpnicfOnuChipSetModel
OBJECT-TYPE
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2OCTET STRING (SIZE(0..255))read-onlycurrent
hpnicfOnuChipSetRevision
OBJECT-TYPE
Chip revision.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3Integer32read-onlycurrent
hpnicfOnuChipSetDesignDate
OBJECT-TYPE
Chip design date.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4DateAndTimeread-onlycurrent
hpnicfOnuCapabilityTable
OBJECT-TYPE
Capability of ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25not-accessiblecurrent
hpnicfOnuCapabilityEntry
OBJECT-TYPE
The entry of the table hpnicfOnuCapabilityTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1not-accessiblecurrent
hpnicfOnuServiceSupported
OBJECT-TYPE
Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1Bits {geinterfacesupport(0), feinterfacesupport(1), voipservicesupport(2), tdmservicesupport(3)}read-onlycurrent
hpnicfOnuGEPortNumber
OBJECT-TYPE
The current gigabit ethernet ports number supported by the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2Integer32read-onlycurrent
hpnicfOnuFEPortNumber
OBJECT-TYPE
the current fast ethernet ports number supported by the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3Integer32read-onlycurrent
hpnicfOnuPOTSPortNumber
OBJECT-TYPE
The current POTS ports number supported by the ONU
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4Integer32read-onlycurrent
hpnicfOnuE1PortsNumber
OBJECT-TYPE
The current E1 ports number supported by the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5Integer32read-onlycurrent
hpnicfOnuUpstreamQueueNumber
OBJECT-TYPE
The number of upstream queues supported by the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6Integer32read-onlycurrent
hpnicfOnuMaxUpstreamQueuePerPort
OBJECT-TYPE
The number of maximum upstream queues per port of the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7Integer32read-onlycurrent
hpnicfOnuDownstreamQueueNumber
OBJECT-TYPE
The number of downstream queues supported by the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8Integer32read-onlycurrent
hpnicfOnuMaxDownstreamQueuePerPort
OBJECT-TYPE
The number of maximum downstream queues per port of the ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9Integer32read-onlycurrent
hpnicfOnuBatteryBackup
OBJECT-TYPE
true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10TruthValueread-onlycurrent
hpnicfOnuIgspFastLeaveSupported
OBJECT-TYPE
true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11TruthValueread-onlycurrent
hpnicfOnuMCtrlFastLeaveSupported
OBJECT-TYPE
true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12TruthValueread-onlycurrent
hpnicfOnuDbaReportTable
OBJECT-TYPE
This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26not-accessiblecurrent
hpnicfOnuDbaReportEntry
OBJECT-TYPE
The entry of the table hpnicfOnuDbaReportTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1not-accessiblecurrent
hpnicfOnuDbaReportQueueId
OBJECT-TYPE
The DBA report queue ID.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1Integer32not-accessiblecurrent
hpnicfOnuDbaReportThreshold
OBJECT-TYPE
The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2Integer32read-writecurrent
hpnicfOnuDbaReportStatus
OBJECT-TYPE
enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfOnuCosToLocalPrecedenceTable
OBJECT-TYPE
Table of map of the COS to local-precedence.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27not-accessiblecurrent
hpnicfOnuCosToLocalPrecedenceEntry
OBJECT-TYPE
Configuration information of map of the COS to local precedence.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1not-accessiblecurrent
hpnicfOnuCosToLocalPrecedenceCosIndex
OBJECT-TYPE
Index of the map, obtains from packet cos value.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1Integer32 (0..7)read-onlycurrent
hpnicfOnuCosToLocalPrecedenceValue
OBJECT-TYPE
Value of local precedence.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2Integer32 (0..7)read-writecurrent
hpnicfEponOnuStpPortTable
OBJECT-TYPE
Table of ONU STP ports.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28not-accessiblecurrent
hpnicfEponOnuStpPortEntry
OBJECT-TYPE
Configuration information of ONU STP ports.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1not-accessiblecurrent
hpnicfEponStpPortIndex
OBJECT-TYPE
The index of the STP ports.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1Integer32 (0..144)accessible-for-notifycurrent
hpnicfEponStpPortDescr
OBJECT-TYPE
The description of the STP ports.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2OCTET STRINGaccessible-for-notifycurrent
hpnicfEponStpPortState
OBJECT-TYPE
The current state of the port (i.e. disabled, discarding, learning and forwarding).
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3INTEGER {disabled(1), discarding(2), learning(3), forwarding(4)}accessible-for-notifycurrent
hpnicfOnuPhysicalTable
OBJECT-TYPE
This table is used for getting ONU physical information.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29not-accessiblecurrent
hpnicfOnuPhysicalEntry
OBJECT-TYPE
The entry of the hpnicfOnuPhysicalTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1not-accessiblecurrent
hpnicfOnuBridgeMac
OBJECT-TYPE
The bridge MAC address of ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1MacAddressread-onlycurrent
hpnicfOnuFirstPonMac
OBJECT-TYPE
The MAC address of ONU first PON port.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2MacAddressread-onlycurrent
hpnicfOnuFirstPonRegState
OBJECT-TYPE
The register state of ONU first PON port.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3INTEGER {notExist(1), absent(2), offline(3), silent(4), down(5), up(6)}read-onlycurrent
hpnicfOnuSecondPonMac
OBJECT-TYPE
The MAC address of ONU second PON port.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4MacAddressread-onlycurrent
hpnicfOnuSecondPonRegState
OBJECT-TYPE
The register state of ONU second PON port.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5INTEGER {notExist(1), absent(2), offline(3), silent(4), down(5), up(6)}read-onlycurrent
hpnicfOnuSmlkTable
OBJECT-TYPE
This table is used for getting ONU SMLK information.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30not-accessiblecurrent
hpnicfOnuSmlkEntry
OBJECT-TYPE
The entry of the hpnicfOnuSmlkTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1not-accessiblecurrent
hpnicfOnuSmlkGroupID
OBJECT-TYPE
The SMLK group ID of ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1Integer32read-onlycurrent
hpnicfOnuSmlkFirstPonRole
OBJECT-TYPE
The role of ONU first PON port in a SMLK group.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2INTEGER {master(1), slave(2), null(3)}read-onlycurrent
hpnicfOnuSmlkFirstPonStatus
OBJECT-TYPE
The transmitting status of ONU first PON port in a SMLK group.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3INTEGER {active(1), standby(2), down(3), null(4)}read-onlycurrent
hpnicfOnuSmlkSecondPonRole
OBJECT-TYPE
The role of ONU second PON port in a SMLK group.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4INTEGER {master(1), slave(2), null(3)}read-onlycurrent
hpnicfOnuSmlkSecondPonStatus
OBJECT-TYPE
The transmitting status of ONU second PON port in a SMLK group.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5INTEGER {active(1), standby(2), down(3), null(4)}read-onlycurrent
hpnicfOnuRS485PropertiesTable
OBJECT-TYPE
Property table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31not-accessiblecurrent
hpnicfOnuRS485PropertiesEntry
OBJECT-TYPE
The entry of property table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1not-accessiblecurrent
hpnicfOnuRS485SerialIndex
OBJECT-TYPE
The index of serial port.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1Integer32 (1..64)not-accessiblecurrent
hpnicfOnuRS485BaudRate
OBJECT-TYPE
The port baud rate.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2INTEGER {baudRate300(1), baudRate600(2), baudRate1200(3), baudRate2400(4), baudRate4800(5), baudRate9600(6), baudRate19200(7), baudRate38400(8), baudRate57600(9), baudRate115200(10)}read-writecurrent
hpnicfOnuRS485DataBits
OBJECT-TYPE
The port number of data bits in a character.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3INTEGER {five(1), six(2), seven(3), eight(4)}read-writecurrent
hpnicfOnuRS485Parity
OBJECT-TYPE
The port sense of a character parity bit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4INTEGER {none(1), odd(2), even(3), mark(4), space(5)}read-writecurrent
hpnicfOnuRS485StopBits
OBJECT-TYPE
The port number of stop bits.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5INTEGER {one(1), two(2), oneAndHalf(3)}read-writecurrent
hpnicfOnuRS485FlowControl
OBJECT-TYPE
The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6INTEGER {none(1), hardware(2), xonOrxoff(3)}read-writecurrent
hpnicfOnuRS485TXOctets
OBJECT-TYPE
The number of output octets about the port. The unit is byte.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7Integer32read-onlycurrent
hpnicfOnuRS485RXOctets
OBJECT-TYPE
The number of input octets about the port. The unit is byte.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8Integer32read-onlycurrent
hpnicfOnuRS485TXErrOctets
OBJECT-TYPE
The number of output error octets about the port. The unit is byte.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9Integer32read-onlycurrent
hpnicfOnuRS485RXErrOctets
OBJECT-TYPE
The number of input error octets about the port. The unit is byte.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10Integer32read-onlycurrent
hpnicfOnuRS485ResetStatistics
OBJECT-TYPE
Reset the counters to zero, including hpnicfOnuRS485TXOctets, hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and hpnicfOnuRS485RXErrOctets.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11INTEGER {counting(1), clear(2)}read-writecurrent
hpnicfOnuRS485SessionSummaryTable
OBJECT-TYPE
Session summary table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32not-accessiblecurrent
hpnicfOnuRS485SessionSummaryEntry
OBJECT-TYPE
The entry of session summary table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1not-accessiblecurrent
hpnicfOnuRS485SessionMaxNum
OBJECT-TYPE
The max session number of every serial port which can be supported.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1Integer32 (1..64)read-onlycurrent
hpnicfOnuRS485SessionNextIndex
OBJECT-TYPE
The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2Integer32 (0..64)read-onlycurrent
hpnicfOnuRS485SessionTable
OBJECT-TYPE
RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33not-accessiblecurrent
hpnicfOnuRS485SessionEntry
OBJECT-TYPE
The entry of session table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1not-accessiblecurrent
hpnicfOnuRS485SessionIndex
OBJECT-TYPE
Raw session index.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1Integer32 (1..64)not-accessiblecurrent
hpnicfOnuRS485SessionType
OBJECT-TYPE
The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2INTEGER {udp(1), tcpClient(2), tcpServer(3)}read-createcurrent
hpnicfOnuRS485SessionAddType
OBJECT-TYPE
This object indicates the transport type of the address contained in hpnicfOnuRS485SessionRemoteIP object.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3InetAddressTyperead-createcurrent
hpnicfOnuRS485SessionRemoteIP
OBJECT-TYPE
The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4InetAddressread-createcurrent
hpnicfOnuRS485SessionRemotePort
OBJECT-TYPE
The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5Integer32 (1024..65535)read-createcurrent
hpnicfOnuRS485SessionLocalPort
OBJECT-TYPE
Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6Integer32 (1024..65535)read-createcurrent
hpnicfOnuRS485SessionRowStatus
OBJECT-TYPE
The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7RowStatusread-createcurrent
hpnicfOnuRS485SessionErrInfoTable
OBJECT-TYPE
Error information table. When failed to create a session, error information can be got from this table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34not-accessiblecurrent
hpnicfOnuRS485SessionErrInfoEntry
OBJECT-TYPE
The entry of error information table.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1not-accessiblecurrent
hpnicfOnuRS485SessionErrInfo
OBJECT-TYPE
Error information string. When a response with 'noCreeation' for row creation in table hpnicfOnuRS485SessionTable, the error reason can be got from this object.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1DisplayStringread-onlycurrent
hpnicfEponBatchOperationMan
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6
hpnicfEponBatchOperationBySlotTable
OBJECT-TYPE
This table is used for batch operation by slot.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1not-accessiblecurrent
hpnicfEponBatchOperationBySlotEntry
OBJECT-TYPE
The entry of the hpnicfEponBatchOperationBySlotTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1not-accessiblecurrent
hpnicfEponBatchOperationBySlotIndex
OBJECT-TYPE
The EPON board index.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1Integer32not-accessiblecurrent
hpnicfEponBatchOperationBySlotType
OBJECT-TYPE
The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hpnicfEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2INTEGER {resetUnknown(1), updateDba(9), updateONU(10)}read-writecurrent
hpnicfEponBatchOperationBySlot
OBJECT-TYPE
Execute batch operation.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3INTEGER {batOpBySlot(1)}read-writecurrent
hpnicfEponBatchOperationBySlotResult
OBJECT-TYPE
The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4Integer32read-onlycurrent
hpnicfEponBatchOperationByOLTTable
OBJECT-TYPE
This table is used for batch operation by OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2not-accessiblecurrent
hpnicfEponBatchOperationByOLTEntry
OBJECT-TYPE
The entry of the hpnicfEponBatchOperationByOLTTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1not-accessiblecurrent
hpnicfEponBatchOperationByOLTType
OBJECT-TYPE
The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.1INTEGER {resetUnknown(1), updateONU(5)}read-writecurrent
hpnicfEponBatchOperationByOLT
OBJECT-TYPE
Execute batch operation.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.2INTEGER {batOpByOlt(1)}read-writecurrent
hpnicfEponBatchOperationByOLTResult
OBJECT-TYPE
The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.3Integer32read-onlycurrent
hpnicfOnuFirmwareUpdateByTypeTable
OBJECT-TYPE
This table is used to update ONU by ONU type.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3not-accessiblecurrent
hpnicfOnuFirmwareUpdateByTypeEntry
OBJECT-TYPE
The entry of the hpnicfOnuFirmwareUpdateByTypeTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1not-accessiblecurrent
hpnicfOnuUpdateByOnuTypeIndex
OBJECT-TYPE
The type and file relationship table entry index.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.1Integer32not-accessiblecurrent
hpnicfOnuUpdateByTypeOnuType
OBJECT-TYPE
The type of ONUs.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.2OCTET STRING (SIZE(0..15))read-createcurrent
hpnicfOnuUpdateByTypeFileName
OBJECT-TYPE
The file to be updated for the type of ONUs.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.3OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfOnuUpdateByTypeRowStatus
OBJECT-TYPE
The status of this table entry. Only createAndGo and destroy actions are supported.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.4RowStatusread-createcurrent
hpnicfEponErrorInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7
hpnicfEponSoftwareErrorCode
OBJECT-TYPE
OLT software error code.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.1Integer32accessible-for-notifycurrent
hpnicfOamVendorSpecificAlarmCode
OBJECT-TYPE
Alarm code of the vendor.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.2Integer32accessible-for-notifycurrent
hpnicfEponOnuRegErrorMacAddr
OBJECT-TYPE
The MAC of ONU registered error.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.3OCTET STRINGaccessible-for-notifycurrent
hpnicfOamEventLogType
OBJECT-TYPE
The type of event that generated this entry in the event log.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.4Unsigned32accessible-for-notifycurrent
hpnicfOamEventLogLocation
OBJECT-TYPE
Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.5INTEGER {local(1), remote(2)}accessible-for-notifycurrent
hpnicfEponLoopbackPortIndex
OBJECT-TYPE
The index of port which generate loop back event.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.6Integer32accessible-for-notifycurrent
hpnicfEponLoopbackPortDescr
OBJECT-TYPE
A textual string containing information about the port generated loop back event.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.7OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfOltPortAlarmLlidMisFrames
OBJECT-TYPE
the amount of mismatched frames about the LLID mismatch alarm.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.8Unsigned32accessible-for-notifycurrent
hpnicfOltPortAlarmBer
OBJECT-TYPE
error bit rate.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.9Unsigned32accessible-for-notifycurrent
hpnicfOltPortAlarmFer
OBJECT-TYPE
error frames rate.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.10Unsigned32accessible-for-notifycurrent
hpnicfEponOnuRegSilentMac
OBJECT-TYPE
The MAC of silent ONU.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.11OCTET STRINGaccessible-for-notifycurrent
hpnicfEponOperationResult
OBJECT-TYPE
The result of EPON operation.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.12OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfEponOnuLaserState
OBJECT-TYPE
The state of ONU laser.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.13INTEGER {normal(1), laserAlwaysOn(2), signalDegradation(3), endOfLife(4)}accessible-for-notifycurrent
hpnicfEponTrap
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8
hpnicfEponTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0
hpnicfEponStat
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.42.1.9
hpnicfEponStatTable
OBJECT-TYPE
This table contains line code error statistics of epon port.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1not-accessiblecurrent
hpnicfEponStatEntry
OBJECT-TYPE
The entry of hpnicfEponStatTable.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1not-accessiblecurrent
hpnicfEponStatFER
OBJECT-TYPE
The frame error rate of epon port, measured in 1e-9 unit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.1Counter64read-onlycurrent
hpnicfEponStatBER
OBJECT-TYPE
The bit error rate of epon port, measured in 1e-9 unit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.2Counter64read-onlycurrent

Notifications

NameOIDStatus
hpnicfEponPortAlarmBerTrap
NOTIFICATION-TYPE
A hpnicfEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.1current
hpnicfEponPortAlarmFerTrap
NOTIFICATION-TYPE
A hpnicfEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.2current
hpnicfEponErrorLLIDFrameTrap
NOTIFICATION-TYPE
A hpnicfEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.3current
hpnicfEponLoopBackEnableTrap
NOTIFICATION-TYPE
A hpnicfEponLoopBackEnableTrap notification is sent when the loop back command is committed.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.4current
hpnicfEponOnuRegistrationErrTrap
NOTIFICATION-TYPE
A hpnicfEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.5current
hpnicfEponOamDisconnectionTrap
NOTIFICATION-TYPE
A hpnicfEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.6current
hpnicfEponEncryptionKeyErrTrap
NOTIFICATION-TYPE
A hpnicfEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.7current
hpnicfEponRemoteStableTrap
NOTIFICATION-TYPE
A hpnicfEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.8current
hpnicfEponLocalStableTrap
NOTIFICATION-TYPE
A hpnicfEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.9current
hpnicfEponOamVendorSpecificTrap
NOTIFICATION-TYPE
A hpnicfEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.10current
hpnicfEponSoftwareErrTrap
NOTIFICATION-TYPE
A hpnicfEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.11current
hpnicfEponPortAlarmBerRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.12current
hpnicfEponPortAlarmFerRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.13current
hpnicfEponErrorLLIDFrameRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.14current
hpnicfEponLoopBackEnableRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.15current
hpnicfEponOnuRegistrationErrRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.16current
hpnicfEponOamDisconnectionRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.17current
hpnicfEponEncryptionKeyErrRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.18current
hpnicfEponRemoteStableRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.19current
hpnicfEponLocalStableRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.20current
hpnicfEponOamVendorSpecificRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.21current
hpnicfEponSoftwareErrRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.22current
hpnicfDot3OamThresholdRecoverEvent
NOTIFICATION-TYPE
A hpnicfDot3OamThresholdRecoverEvent notification is sent when hpnicfDot3OamThresholdEvent is detected and then recoverd.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.23current
hpnicfDot3OamNonThresholdRecoverEvent
NOTIFICATION-TYPE
A hpnicfDot3OamNonThresholdRecoverEvent notification is sent when hpnicfDot3OamNonThresholdEvent is detected and then recoverd.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.24current
hpnicfEponOnuRegExcessTrap
NOTIFICATION-TYPE
A hpnicfEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.25current
hpnicfEponOnuRegExcessRecoverTrap
NOTIFICATION-TYPE
A hpnicfEponOnuRegExcessRecoverTrap notification is sent when hpnicfEponOnuRegExcessTrap is detected and then recoverd.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.26current
hpnicfEponOnuPowerOffTrap
NOTIFICATION-TYPE
A hpnicfEponOnuPowerOffTrap notification is sent when ONU is power off.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.27current
hpnicfEponOltSwitchoverTrap
NOTIFICATION-TYPE
A hpnicfEponOltSwithoverTrap notification is sent when OLT switchover is detected.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.28current
hpnicfEponOltDFETrap
NOTIFICATION-TYPE
A hpnicfEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.29current
hpnicfEponOltDFERecoverTrap
NOTIFICATION-TYPE
A hpnicfEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.30current
hpnicfEponOnuSilenceTrap
NOTIFICATION-TYPE
The hpnicfEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.31current
hpnicfEponOnuSilenceRecoverTrap
NOTIFICATION-TYPE
The hpnicfEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.32current
hpnicfEponOnuUpdateResultTrap
NOTIFICATION-TYPE
A hpnicfEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.33current
hpnicfEponOnuAutoBindTrap
NOTIFICATION-TYPE
A hpnicfEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.34current
hpnicfEponOnuPortStpStateTrap
NOTIFICATION-TYPE
A hpnicfEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.35current
hpnicfEponOnuLaserFailedTrap
NOTIFICATION-TYPE
A hpnicfEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.36current
hpnicfOnuSmlkSwitchoverTrap
NOTIFICATION-TYPE
A hpnicfOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.37current