HPN-ICF-LswMix-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.8.35.17
- Last updated
- 2001-06-29 00:00
- Revisions
- 2001-06-29 00:00
- Namespace
- hp
- Source file
HPN-ICF-LswMix-MIB- Digest
sha256:c612626daeb830d6f8b3ea4aeb0a52c854db292498cd5e112acea69544651bdf
Imports
| From | Symbols |
|---|---|
| HPN-ICF-LSW-DEV-ADM-MIB | hpnicfLswFrameIndex, hpnicfLswSlotIndex |
| HPN-ICF-OID-MIB | hpnicflswCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HCNUM-TC HPN-ICF-LSW-DEV-ADM-MIB HPN-ICF-LswMix-MIB HPN-ICF-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfLswLastSwitchDate OBJECT-TYPE This object indicates the date of the most recent change to the mpu(Main Processing Unit). | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.1 | INTEGER | read-only | current |
| hpnicfLswLastSwitchTime OBJECT-TYPE This object indicates the time of the most recent change to the mpu. | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.2 | INTEGER | read-only | current |
| hpnicfLswMpuSwitchsNum OBJECT-TYPE This object indicates the total times of the mpu switched since the system start up. | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.3 | INTEGER | read-only | current |
| hpnicfLswMpuSwitch OBJECT-TYPE Setting this object will immediately switch the standby mpu to master mpu. Read is not supported. | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.4 | INTEGER {switch(1)} | read-write | current |
| hpnicfLswXSlotTable OBJECT-TYPE The source main table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5 | not-accessible | current | |
| hpnicfLswXSlotEntry OBJECT-TYPE An entry in the source main table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1 | not-accessible | current | |
| hpnicfLswMainCardBoardStatus OBJECT-TYPE The value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit) | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.1 | INTEGER {master(1), standby(2), process(3)} | read-only | current |
| hpnicfLswCrossBarStatus OBJECT-TYPE The value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode. | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.2 | INTEGER {master(1), standby(2)} | read-only | current |
| hpnicfsMixTrapMib OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.10 |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfSlaveSwitchOver NOTIFICATION-TYPE An hpnicfSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed. | 1.3.6.1.4.1.11.2.14.11.15.8.35.17.10.1 | current |