MIBs Depot

HP-ICF-OSPFV3-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.5.1.44
Last updated
2017-05-18 00:00
Organization
HP Networking
Revisions
2017-05-18 00:00, 2014-06-13 00:00, 2012-04-30 00:00, 2012-04-20 00:00, 2011-06-13 19:53, 2010-11-04 00:00, 2009-02-05 18:00
Namespace
hp
Source file
HP-ICF-OSPFV3-MIB
Digest
sha256:86a6da6abfa71aa38966de46e4e183fe32f52a63107a980eb5807f9e0e3a1d16

Description

The MIB module contains HP proprietary extensions to the OSPFV3-MIB module.

Contact

Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747

Imports

FromSymbols
HP-ICF-OIDhpSwitch
HP-ICF-OSPFHpicfOspfLogAction, HpicfOspfLogType
INET-ADDRESS-MIBInetAddressIPv6
OSPF-MIBBigMetric, Metric
OSPFV3-MIBOspfv3RouterIdTC, ospfv3AreaAggregateEntry, ospfv3AreaEntry, ospfv3AreaLsdbAreaId, ospfv3AreaLsdbEntry, ospfv3AreaLsdbLsid, ospfv3AreaLsdbRouterId, ospfv3AreaLsdbType, ospfv3AsLsdbEntry, ospfv3IfEntry, ospfv3IfIndex, ospfv3IfInstId, ospfv3LinkLsdbEntry, ospfv3LinkLsdbIfIndex, ospfv3LinkLsdbIfInstId, ospfv3LinkLsdbLsid, ospfv3LinkLsdbRouterId, ospfv3LinkLsdbType, ospfv3NbrEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-ICF-OID
HP-ICF-OSPF
HP-ICF-OSPFV3-MIB
IANA-RTPROTO-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
OSPF-MIB
OSPFV3-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpicfOspfv3Objects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.1
hpicfOspfv3GeneralGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1
hpicfOspfv3DefaultImportMetric
OBJECT-TYPE
The default metric used for advertising external routes by this router.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.1BigMetricread-writecurrent
hpicfOspfv3DefaultImportMetricType
OBJECT-TYPE
The default metric type used for advertising external routes by this router.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.2INTEGER {externalType1(1), externalType2(2)}read-writecurrent
hpicfOspfv3IntraAreaDistance
OBJECT-TYPE
The administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfv3InterAreaDistance or hpicfOspfv3ExternalDistance is lower than hpicfOspfv3IntraAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3Integer32 (1..255)read-writecurrent
hpicfOspfv3InterAreaDistance
OBJECT-TYPE
The administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area routes, even if hpicfOspfv3InterAreaDistance is lower than hpicfOspfv3IntraAreaDistance. It will also still prefer inter-area routes over AS-external routes even if hpicfOspfv3ExternalDistance is lower than hpicfOspfv3InterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.4Integer32 (1..255)read-writecurrent
hpicfOspfv3ExternalDistance
OBJECT-TYPE
The administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes and inter-area routes over AS-external routes even if hpicfOspfv3ExternalDistance is lower than the hpicfOspfv3IntraAreaDistance or hpicfOspfv3InterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.5Integer32 (1..255)read-writecurrent
hpicfOspfv3SpfThrottleStartInterval
OBJECT-TYPE
Initial SPF schedule delay
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.7Integer32 (0..600)read-writecurrent
hpicfOspfv3SpfThrottleWaitInterval
OBJECT-TYPE
Minimum wait time between two consecutive SPFs When spf throttle is triggered.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.8Integer32 (0..600)read-writecurrent
hpicfOspfv3SpfThrottleMaxWaitTime
OBJECT-TYPE
Maximum time between two consecutive SPFs runs when spf throttling active.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.9Integer32 (0..600)read-writecurrent
hpicfOspfv3SpfThrottleCurrentSpfInterval
OBJECT-TYPE
Current dynamic wait interval between SPF computations
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.10Unsigned32read-onlycurrent
hpicfOspfv3AreaCount
OBJECT-TYPE
Number of areas in a router
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.11Unsigned32read-onlycurrent
hpicfOspfv3RestartHelper
OBJECT-TYPE
Graceful restart helper status A value of true (1) indicates that Restart helper is enabled, false(2) indicates that Restart helper is disabled.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.12TruthValueread-onlycurrent
hpicfOspfv3ASscopeUnknownLsaCount
OBJECT-TYPE
The total number of AS-scope unknown link state advertisements received.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.13Counter32read-onlycurrent
hpicfOspfv3LinkLsdbStatLinkLsa
OBJECT-TYPE
This object indicates total number of Link LSAs in the router.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.14Counter32read-onlycurrent
hpicfOspfv3TotalUnknownLsa
OBJECT-TYPE
This object indicates total number of LSAs received with Unknown type.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.15Unsigned32read-onlycurrent
hpicfOspfv3ReferenceCost
OBJECT-TYPE
The reference cost is used as global configuration for internal area cost & vlan cost.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.16Metricread-writecurrent
hpicfOspfv3AsLsdbTable
OBJECT-TYPE
The OSPFv3 AS-Scope Link State Database (LSDB). The LSDB contains the AS-Scope Link State Advertisements from throughout the areas that the device is attached to.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2not-accessiblecurrent
hpicfOspfv3AsLsdbEntry
OBJECT-TYPE
A single AS-Scope Link State Advertisement.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1not-accessiblecurrent
hpicfOspfv3AsLsdbEFTFlags
OBJECT-TYPE
A 32-bit integer Representing the E,F and T bit flags
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.1Bits {bitE(0), bitF(1), bitT(2)}read-onlycurrent
hpicfOspfv3AsLsdbMetric
OBJECT-TYPE
The cost associated with this route.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.2Metricread-onlycurrent
hpicfOspfv3AsLsdbPrefixLength
OBJECT-TYPE
The Prefix Length of the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.3Unsigned32read-onlycurrent
hpicfOspfv3AsLsdbPrefixOptions
OBJECT-TYPE
The Prefix Options associated with the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.4Unsigned32read-onlycurrent
hpicfOspfv3AsLsdbRefLsType
OBJECT-TYPE
If non-zero value, this refers to another LSA type in Link State Database further identified by the Reference Link State ID field
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.5Unsigned32read-onlycurrent
hpicfOspfv3AsLsdbAddrPrefix
OBJECT-TYPE
The advertised 16-byte Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.6InetAddressIPv6read-onlycurrent
hpicfOspfv3AsLsdbFwdingAddress
OBJECT-TYPE
If included, Data traffic for the advertised destination will be forwarded to this address.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.7InetAddressIPv6read-onlycurrent
hpicfOspfv3AsLsdbExtRouteTags
OBJECT-TYPE
The 32-bit Route Tag for the advertised Route.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.8Unsigned32read-onlycurrent
hpicfOspfv3AsLsdbRefLsId
OBJECT-TYPE
The 32-bit Link state ID of the referenced LSA entry.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.9Unsigned32read-onlycurrent
hpicfOspfv3AsLsdbLsaLength
OBJECT-TYPE
This field describes the length of LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.10Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbTable
OBJECT-TYPE
The OSPFv3 Area-Scope link state database. The LSDB contains the Area-Scope Link State Advertisements from throughout the area that the device is attached to.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3not-accessiblecurrent
hpicfOspfv3AreaLsdbEntry
OBJECT-TYPE
A single Area-Scope Link State Advertisement.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1not-accessiblecurrent
hpicfOspfv3AreaLsdbRtrCapBits
OBJECT-TYPE
This field is valid only for Router LSA. It represents the capabilities of the router in the Area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.1Bits {bitV(0), bitE(1), bitB(2), bitW(3), bitNt(4)}read-onlycurrent
hpicfOspfv3AreaLsdbOptions
OBJECT-TYPE
The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. This field is valid if the LSA is a Router LSA or a Network LSA, or an Inter-Area-Router LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.2Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbMetric
OBJECT-TYPE
This field is valid only for Router LSA, a Inter-Area_prefix LSA or a NSSA LSA. This field indicates the cost involved in using the interface or route.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.3Metricread-onlycurrent
hpicfOspfv3AreaLsdbPrefixLength
OBJECT-TYPE
The Prefix Length of the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.4Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbPrefixOptions
OBJECT-TYPE
The Prefix Options associated with the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.5Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbAddrPrefix
OBJECT-TYPE
The advertised 16-byte Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.6InetAddressIPv6read-onlycurrent
hpicfOspfv3AreaLsdbDstRtrId
OBJECT-TYPE
The Router ID of the router being described by the LSA. This field is valid if the LSA is a Inter-Area-Router LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.7Ospfv3RouterIdTCread-onlycurrent
hpicfOspfv3AreaLsdbNumPrefixes
OBJECT-TYPE
This field is valid only for Inter-Area-Prefix LSA and indicates the number of prefixes in the LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.8Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbRefLsType
OBJECT-TYPE
This field is valid only for Inter-Area-Prefix LSA or a NSSA LSA. If non-zero, an LSA with this LS type is to be associated with this LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.9Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbRefLsId
OBJECT-TYPE
This field is valid only for Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and identifies the LSA with this Link State ID.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.10Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbRefAdvRtrId
OBJECT-TYPE
This field is valid only for Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and identifies the LSA having this Router ID as the advertising Router ID.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.11Ospfv3RouterIdTCread-onlycurrent
hpicfOspfv3AreaLsdbEFTFlags
OBJECT-TYPE
This field is valid only for NSSA LSA. This field represents the E,F and T bit flags
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.12Bits {bitE(0), bitF(1), bitT(2)}read-onlycurrent
hpicfOspfv3AreaLsdbFwdingAddress
OBJECT-TYPE
This field is valid only for NSSA LSA. This field is present only if the 'F' Bit is set in the EFT flags field and if included, the data traffic for the advertised destination will be forwarded to this address.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.13InetAddressIPv6read-onlycurrent
hpicfOspfv3AreaLsdbExtRouteTags
OBJECT-TYPE
This field is valid only for NSSA LSA. This field is present only if the 'T' Bit is set in the EFT flags field. A 32-bit field which may be used to communicate additional information between AS boundary routers.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.14Unsigned32read-onlycurrent
hpicfOspfv3AreaLsdbLsaLength
OBJECT-TYPE
This field describes the length of LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.15Unsigned32read-onlycurrent
hpicfOspfv3LinkLsdbTable
OBJECT-TYPE
The OSPFv3 Link-Scope link state database(LSDB) for non-virtual interfaces. The LSDB contains the Link-Scope Link State Advertisements from the interfaces that the device is attached to.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.4not-accessiblecurrent
hpicfOspfv3LinkLsdbEntry
OBJECT-TYPE
A single Link-Scope Link State Advertisement.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1not-accessiblecurrent
hpicfOspfv3LinkLsdbRtrPriority
OBJECT-TYPE
This field is the OSPF priority set for this router
1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.1Unsigned32read-onlycurrent
hpicfOspfv3LinkLsdbOptions
OBJECT-TYPE
The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.2Unsigned32read-onlycurrent
hpicfOspfv3LinkLsdbLocalAddress
OBJECT-TYPE
The advertising router's link local IPv6 address
1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.3InetAddressIPv6read-onlycurrent
hpicfOspfv3LinkLsdbNumPrefixes
OBJECT-TYPE
The number of other links on the advertising router
1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.4Unsigned32read-onlycurrent
hpicfOspfv3LinkLsdbLsaLength
OBJECT-TYPE
This field describes the length of LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.5Unsigned32read-onlycurrent
hpicfOspfv3IfTable
OBJECT-TYPE
The table describes the Ospfv3 interfaces.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5not-accessiblecurrent
hpicfOspfv3IfEntry
OBJECT-TYPE
The Entry describes one Ospfv3 interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1not-accessiblecurrent
hpicfOspfv3IfPassive
OBJECT-TYPE
The passive state configuration of the OSPF interface. In the passive mode no OSPF protocol messages are exchanged on this interface. true (1) - The interface is configured to work in Passive mode false (2) - The interface is configured to work in normal mode. This is the default configuration. Changing the value will cause OSPF to reset on this interface and make necessary adjustments to the link state database. All other operations are not defined and will not affect the state of the protocol.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.1TruthValueread-createcurrent
hpicfOspfv3IfNbrCount
OBJECT-TYPE
This object specifies the number of OSPFv3 neighbors reachable via this interface. This counter should be incremented when a new neighbor is added in the network in which this interface is present. It should be decremented when a neighbor is disconnected.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.2Unsigned32read-onlycurrent
hpicfOspfv3IfDRAddr
OBJECT-TYPE
This object specifies link local ipv6 address of Designated Router on the interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.10InetAddressIPv6read-onlycurrent
hpicfOspfv3IfBDRAddr
OBJECT-TYPE
This object specifies link local ipv6 address of Backup Designated Router on the interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.11InetAddressIPv6read-onlycurrent
hpicfOspfv3IfHelloDueTime
OBJECT-TYPE
This object specifies the time remaining for the hello timer for the particular Interface to expire.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.12Unsigned32read-onlycurrent
hpicfOspfv3IfAdjNbrCount
OBJECT-TYPE
This object specifies the number of fully adjacent neighbors present on this interface. This counter should be incremented when a new neighbor becomes fully adjacent. It should be decremented when the neighbor goes out from full state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.13Unsigned32read-onlycurrent
hpicfOspfv3NbrTable
OBJECT-TYPE
A table describing all neighbors of the of the OSPFv3 router.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.6not-accessiblecurrent
hpicfOspfv3NbrEntry
OBJECT-TYPE
The information regarding a single neighbor.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1not-accessiblecurrent
hpicfOspfv3NbrUpTime
OBJECT-TYPE
This object specifies the time duration in seconds for which the adjacency with a particular neighbor is active. This should be a monotonically increasing timer for the duration till the adjacency is active. This counter should be reset on losing and re-establishing an adjacency
1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.1Unsigned32read-onlycurrent
hpicfOspfv3NbrTimeToExpiry
OBJECT-TYPE
This object specifies the time remaining for the dead timer for the particular neighbor to expire. This counter thus specifies the time in seconds left for an adjacency to be brought down in case no hello packet is received during that interval.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.2Unsigned32read-onlycurrent
hpicfOspfv3NbrDataBaseSummary
OBJECT-TYPE
The number of Link State Advertisements (LSA) sent in Database Description (DD)packet.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.3Gauge32read-onlycurrent
hpicfOspfv3NbrLinkStateRequest
OBJECT-TYPE
The number of Link State Advertisements (LSA) in link state request list.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.4Gauge32read-onlycurrent
hpicfOspfv3NbrRestartState
OBJECT-TYPE
Describes the Graceful Restart(GR) state. normal(0) - Indicates normal status helper(1) - Helper indicates the router is helping another router which is currently in graceful restart.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.5INTEGER {normal(0), helper(1)}read-onlycurrent
hpicfOspfv3IfStatsTable
OBJECT-TYPE
Table that contains OSPFv3 Interface traffic specific statistics.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7not-accessiblecurrent
hpicfOspfv3IfStatsEntry
OBJECT-TYPE
A list of statistics counters maintained for an OSPFv3 interface traffic information.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1not-accessiblecurrent
hpicfOspfv3IfSentHelloPkt
OBJECT-TYPE
The number of OSPFv3 Hello packets sent on the interface. This number is incremented each time an OSPFv3 Hello packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.1Counter32read-onlycurrent
hpicfOspfv3IfSentDDPkt
OBJECT-TYPE
The number of Database Description packets sent on the interface. This number is incremented each time an OSPFv3 DD packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.2Counter32read-onlycurrent
hpicfOspfv3IfSentLSRPkt
OBJECT-TYPE
The number of Link State Request packets sent on the interface. This number is incremented each time OSPFv3 LSR packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.3Counter32read-onlycurrent
hpicfOspfv3IfSentLSUPkt
OBJECT-TYPE
The number of Link State Update packets sent on the interface. This number is incremented each time OSPFv3 LSU packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.4Counter32read-onlycurrent
hpicfOspfv3IfSentLSAPkt
OBJECT-TYPE
The number of Link State Acknowledgement packet sent on the interface. This number is incremented each time OSPFv3 LS Ack packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.5Counter32read-onlycurrent
hpicfOspfv3IfRcvdHelloPkt
OBJECT-TYPE
The number of Hello packets received on the interface. This number is incremented each time a hello packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.6Counter32read-onlycurrent
hpicfOspfv3IfRcvdDDPkt
OBJECT-TYPE
The number of Database Description packets received on the interface. This number is incremented each time a OSPFv3 DD packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.7Counter32read-onlycurrent
hpicfOspfv3IfRcvdLSRPkt
OBJECT-TYPE
The number of Link State Request packets received on the interface. This number is incremented each time a OSPFv3 LSR packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.8Counter32read-onlycurrent
hpicfOspfv3IfRcvdLSUPkt
OBJECT-TYPE
The number of Link State Update packets received on the interface. This number is incremented each time an OSPFv3 LSU packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.9Counter32read-onlycurrent
hpicfOspfv3IfRcvdLSAPkt
OBJECT-TYPE
The number of Link State Acknowledgement packets received on the interface. This number is incremented each time a OSPF LS Ack packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.10Counter32read-onlycurrent
hpicfOspfv3IfSentTotalErrorCount
OBJECT-TYPE
This refers to the number of erroneous packets discarded on an OSPFv3 interface while sending errors. Discontinuities in the value of this counter can occur at re-initialization of the management system.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.11Counter32read-onlycurrent
hpicfOspfv3IfRcvdTotalErrorCount
OBJECT-TYPE
This refers to the number of erroneous packets received on an OSPFv3 interface. Discontinuities in the value of this counter can occur at re-initialization of the management system.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.12Counter32read-onlycurrent
hpicfOspfv3IfErrorTable
OBJECT-TYPE
Table that contains OSPFv3 Interface traffic specific error information.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.8not-accessiblecurrent
hpicfOspfv3IfErrorEntry
OBJECT-TYPE
A list of error counters maintained for an OSPFv3 interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1not-accessiblecurrent
hpicfOspfv3IfErrorType
OBJECT-TYPE
This refers to the type of errors in the OSPFv3 packet received on an OSPFv3 enabled interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.1Integer32 (1..65535)not-accessiblecurrent
hpicfOspfv3IfErrorCount
OBJECT-TYPE
This refers to the number of erroneous packets received on an OSPFv3 interface for each error type. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.2Counter32read-onlycurrent
hpicfOspfv3IfClearStatsTable
OBJECT-TYPE
A list used to clear statistics information maintained for an OSPFv3 interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.9not-accessiblecurrent
hpicfOspfv3IfClearStatsEntry
OBJECT-TYPE
A list used to clear statistics information maintained for an OSPFv3 interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1not-accessiblecurrent
hpicfOspfv3ClearCounters
OBJECT-TYPE
When this variable is set to true for a given vlan interface, corresponding interface counters will be cleared. Read of this will always be false.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1.1TruthValueread-writecurrent
hpicfOspfv3SpfTable
OBJECT-TYPE
Table that contains OSPFv3 SPF execution details.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.10not-accessiblecurrent
hpicfOspfv3SpfEntry
OBJECT-TYPE
A list of OSPFv3 SPF algorithm execution details.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1not-accessiblecurrent
hpicfOspfv3SpfIndex
OBJECT-TYPE
The index in spf table. This can range from 1 to 100 as only last hundred SPF run's reasons will be saved.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.1Unsigned32not-accessiblecurrent
hpicfOspfv3SpfReason
OBJECT-TYPE
The hpicfOspfv3SpfReason refers to the reasons for scheduling an SPF run. The Reasons could be OSPFv3 initialization, adding/deleting interface or link state update received.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.2Unsigned32read-onlycurrent
hpicfOspfv3LogTable
OBJECT-TYPE
A table containing the configuration parameters for OSPFv3 event logging.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.11not-accessiblecurrent
hpicfOspfv3LogEntry
OBJECT-TYPE
The configuration parameters for OSPFv3 event log entry.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1not-accessiblecurrent
hpicfOspfv3LogType
OBJECT-TYPE
The type of the event log in OSPFv3 routing protocol .
1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.1HpicfOspfLogTypenot-accessiblecurrent
hpicfOspfv3LogAction
OBJECT-TYPE
The mode of OSPFv3 event logging. If the OSPFv3 log type is set to neighborAdjacencyChanges, then meaning of this field is as follows: If enabled, it logs only the adjacency state transitions to final states. If enabledWithDetail option, it logs all the state transitions and other events and error conditions related to adjacency. If disabled, none of the adjacency related events are logged.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.2HpicfOspfLogActionread-writecurrent
hpicfOspfv3RouterLSATable
OBJECT-TYPE
This table represents details advertised in router LSA in addition to area LSDB table.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.12not-accessiblecurrent
hpicfOspfv3RouterLSAEntry
OBJECT-TYPE
A single Area-Scope Link State Advertisement.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1not-accessiblecurrent
hpicfOspfv3RouterLSANbrIfId
OBJECT-TYPE
The Interface Id of the neighbor.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.1Unsigned32not-accessiblecurrent
hpicfOspfv3RouterLSANbrRtrId
OBJECT-TYPE
The Router ID the of the neighbor router.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.2Ospfv3RouterIdTCnot-accessiblecurrent
hpicfOspfv3RouterLSAIfType
OBJECT-TYPE
The kind of interface being described. One of the following: Type Description --------------------------------------------------- 1 Point-to-point connection to another router 2 Connection to a transit network 3 Reserved 4 Virtual link .
1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.3Unsigned32read-onlycurrent
hpicfOspfv3RouterLSAMetric
OBJECT-TYPE
The cost of using this router interface for outbound traffic.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.4Unsigned32 (0..4294967295)read-onlycurrent
hpicfOspfv3RouterLSAIfId
OBJECT-TYPE
The Interface ID assigned to the interface being described.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.5Unsigned32 (0..4294967295)read-onlycurrent
hpicfOspfv3NetworkLSATable
OBJECT-TYPE
This table represents details advertised in a Network LSA in addition to area LSDB table.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.13not-accessiblecurrent
hpicfOspfv3NetworkLSAEntry
OBJECT-TYPE
A single Area-Scope Link State Advertisement.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1not-accessiblecurrent
hpicfOspfv3NetworkLSASeqNum
OBJECT-TYPE
The 32-bit LSA sequence number.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.1Unsigned32not-accessiblecurrent
hpicfOspfv3NetworkLSAAttachedRouter
OBJECT-TYPE
The 32-bit Router identifier of the attached Router.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.2Ospfv3RouterIdTCread-onlycurrent
hpicfOspfv3IntraAPLSATable
OBJECT-TYPE
This table represents details advertised in Intra AP LSA in addition to area LSDB table.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.14not-accessiblecurrent
hpicfOspfv3IntraAPLSAEntry
OBJECT-TYPE
A single Area-Scope Link State Advertisement.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1not-accessiblecurrent
hpicfOspfv3IntraAPAddrPrefix
OBJECT-TYPE
The advertised 16-byte Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.1InetAddressIPv6not-accessiblecurrent
hpicfOspfv3IntraAPPrefixLength
OBJECT-TYPE
The Prefix Length of the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.2Unsigned32not-accessiblecurrent
hpicfOspfv3IntraAPPrefixOptions
OBJECT-TYPE
The Prefix Options associated with the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.3Unsigned32read-onlycurrent
hpicfOspfv3IntraAPMetric
OBJECT-TYPE
The Cost associated with the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.4Metricread-onlycurrent
hpicfOspfv3LinkLSATable
OBJECT-TYPE
This table represents details advertised in link LSA in addition to link LSDB table.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.15not-accessiblecurrent
hpicfOspfv3LinkLSAEntry
OBJECT-TYPE
A single Link-Scope Link State Advertisement.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1not-accessiblecurrent
hpicfOspfv3LinkAddrPrefix
OBJECT-TYPE
The address prefix of link advertised in link LSA.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.1InetAddressIPv6not-accessiblecurrent
hpicfOspfv3LinkPrefixLength
OBJECT-TYPE
The Prefix Length of the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.2Unsigned32not-accessiblecurrent
hpicfOspfv3LinkPrefixOptions
OBJECT-TYPE
The Prefix Options associated with the Address Prefix.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.3Unsigned32 (0..4294967295)read-onlycurrent
hpicfOspfv3Trap
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.1.16
hpicfOspfv3Traps
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0
hpicfOspfv3TrapControl
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1
hpicfOspfv3SetTrap
OBJECT-TYPE
A four-octet string serving as a bit map for the trap events defined by the OSPFv3 traps. This object is used to enable or disable specific OSPFv3 traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0. Trap Name BitMap ---------------------------------------- OSPFV3_IF_STATE_CHANGE 0x00001 OSPFV3_VIRT_IF_STATE_CHANGE 0x00002 OSPFV3_NBR_STATE_CHANGE 0x00004 OSPFV3_VIRT_NBR_STATE_CHANGE 0x00008 OSPFV3_INTF_CONFIG_ERROR 0x00010 OSPFV3_VIRT_INTF_CONFIG_ERROR 0x00020 OSPFV3_INTF_RCV_BAD_PKT 0x00040 OSPFV3_VIRT_INTF_RCV_BAD_PKT 0x00080 OSPFV3_RST_STATUS 0x20000 OSPFV3_NBR_RST_HELP_STATUS 0x40000 OSPFV3_VIRT_NBR_RST_HELP_STAT 0x80000 OSPFV3_ALL_TRAPS 0xE00FF
1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1OCTET STRING (SIZE(4))read-writecurrent
hpicfOspfv3AreaTable
OBJECT-TYPE
This table describes Ospfv3 area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17not-accessiblecurrent
hpicfOspfv3AreaEntry
OBJECT-TYPE
The object describes Ospfv3 area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1not-accessiblecurrent
hpicfOspfv3AreaNbrDownCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in DOWN state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.8Counter32read-onlycurrent
hpicfOspfv3AreaNbrAttemptCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in ATTEMPT state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.9Counter32read-onlycurrent
hpicfOspfv3AreaNbrInitCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in INIT state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.10Counter32read-onlycurrent
hpicfOspfv3AreaNbr2wayCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in TWO WAY state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.11Counter32read-onlycurrent
hpicfOspfv3AreaNbrExstartCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in EX-START state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.12Counter32read-onlycurrent
hpicfOspfv3AreaNbrExchangeCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in EXCHANGE state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.13Counter32read-onlycurrent
hpicfOspfv3AreaNbrLoadingCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in LOADING state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.14Counter32read-onlycurrent
hpicfOspfv3AreaNbrFullCount
OBJECT-TYPE
This object indicates the number of neighbor routers in this area that are in FULL state.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.15Counter32read-onlycurrent
hpicfOspfv3AreaInterfaceCount
OBJECT-TYPE
This object indicates the total number of OSPFv3 interfaces in this area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.16Counter32read-onlycurrent
hpicfOspfv3AreaScopeUnknownLsaCount
OBJECT-TYPE
The total number of area-scope unknown link state advertisements in this area's link state database.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.17Counter32read-onlycurrent
hpicfOspfv3AreaAggregateTable
OBJECT-TYPE
HP proprietary extensions to ospfv3AreaAggregateTable
1.3.6.1.4.1.11.2.14.11.5.1.44.1.19not-accessiblecurrent
hpicfOspfv3AreaAggregateEntry
OBJECT-TYPE
Each entry is extension of ospfv3AreaAggregateEntry
1.3.6.1.4.1.11.2.14.11.5.1.44.1.19.1not-accessiblecurrent
hpicfOspfv3AreaAggregateCost
OBJECT-TYPE
Manually configured cost of the summary advertisement. A value of 0 indicates that the cost calculated by the OSPF standard should be used. Valid costs range from 1-16777215
1.3.6.1.4.1.11.2.14.11.5.1.44.1.19.1.1BigMetricread-createcurrent
hpicfOspfv3AreaLsdbStatsTable
OBJECT-TYPE
Table that contains OSPFv3 area link state database statistics specific information.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.20not-accessiblecurrent
hpicfOspfv3AreaLsdbStatsEntry
OBJECT-TYPE
A list of statistics counters maintained for an OSPFv3 area link state database.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1not-accessiblecurrent
hpicfOspfv3AreaLsdbStatRtrLsaCnt
OBJECT-TYPE
This object indicates number of router LSA per area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.1Counter32read-onlycurrent
hpicfOspfv3AreaLsdbStatNwLsaCnt
OBJECT-TYPE
This object indicates number of network LSA per area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.2Counter32read-onlycurrent
hpicfOspfv3AreaLsdbStatInterPreLsaCnt
OBJECT-TYPE
This object indicates number of inter-area prefix LSA per area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.3Counter32read-onlycurrent
hpicfOspfv3AreaLsdbStatInterRtrLsaCnt
OBJECT-TYPE
This object indicates number of inter-area router LSA per area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.4Counter32read-onlycurrent
hpicfOspfv3AreaLsdbStatIntraPreLsaCnt
OBJECT-TYPE
This object indicates number of intra-area prefix LSA per area.
1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.5Counter32read-onlycurrent
hpicfOspfv3Conformance
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.2
hpicfOspfv3Groups
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1
hpicfOspfv3Compliances
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.2.2
hpicfOspfv3IfMetricObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.44.4
hpicfOspfv3IfMetricTable
OBJECT-TYPE
Extensions to the table that contains OSPF Metric specific information.
1.3.6.1.4.1.11.2.14.11.5.1.44.4.1not-accessiblecurrent
hpicfOspfv3IfMetricEntry
OBJECT-TYPE
A list of extensions to the information maintained for an OSPF interface.
1.3.6.1.4.1.11.2.14.11.5.1.44.4.1.1not-accessiblecurrent
hpicfOspfv3IfFlagValue
OBJECT-TYPE
This flag is defined to know the type of OSPF cost configuration.. -1 : Default configuration. 0 : Manual configuration. 1 : Global configuration (value taken from global).
1.3.6.1.4.1.11.2.14.11.5.1.44.4.1.1.1Integer32 (-1..1)read-writecurrent

Conformance

NameOIDStatus
hpicfOspfv3BasicGroup
OBJECT-GROUP
These objects are used for managing/monitoring OSPFv3 global parameters.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.1current
hpicfOspfv3AsLsdbGroup
OBJECT-GROUP
These objects are used for OSPFv3 systems that display their AS-scope link state database.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.2current
hpicfOspfv3AreaLsdbGroup
OBJECT-GROUP
These objects are used for OSPFv3 systems that display their Area-scope link state database.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.3current
hpicfOspfv3LinkLsdbGroup
OBJECT-GROUP
These objects are used for OSPFv3 systems that display their Link-scope link state database for non-virtual interfaces.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.4current
hpicfOspfv3LogGroup
OBJECT-GROUP
A collection of objects for configuring the logging of OSPFv3 adjacency related events.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.8current
hpicfOspfv3TrapControlGroup
OBJECT-GROUP
A collection of object which is for controlling the hpicfOspfv3Traps.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.9current
hpicfOspfv3AreaGroup
OBJECT-GROUP
These Area objects used for managing/monitoring OSPFv3 Areas.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.11current
hpicfOspfv3AreaLsdbStatsGroup
OBJECT-GROUP
These lsdb objects used for monitoring OSPFv3 statistics per area.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.13current
hpicfOspfv3NbrGroup1
OBJECT-GROUP
These neighbor objects are used for managing/monitoring OSPFv3 neighbors.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.14current
hpicfOspfv3StatisticGroup1
OBJECT-GROUP
A collection of objects that contain OSPF interface and SPF statistics.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.15current
hpicfOspfv3IfGroup1
OBJECT-GROUP
These interface objects are used for managing/monitoring OSPFv3 interfaces.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.16current
hpicfOspfv3MetricGroup
OBJECT-GROUP
Flags to identify global or manual OSPFv3 cost configuration.
1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.17current
hpicfOspfv3Compliance
MODULE-COMPLIANCE
The compliance statement
1.3.6.1.4.1.11.2.14.11.5.1.44.2.2.1deprecated
hpicfOspfv3Compliance2
MODULE-COMPLIANCE
The compliance statement
1.3.6.1.4.1.11.2.14.11.5.1.44.2.2.2current