HP-ICF-OSPF
- Registered at
- 1.3.6.1.4.1.11.2.14.11.5.1.14
- Last updated
- 2010-10-28 10:00
- Organization
- HP Networking
- Revisions
- 2010-10-28 10:00, 2010-03-25 00:00, 2009-03-05 00:00, 2008-10-15 03:39, 2008-03-28 03:39, 2007-04-02 09:33, 2006-07-10 20:10, 2003-05-13 02:02, 2001-11-13 03:39
- Namespace
- hp
- Source file
HP-ICF-OSPF- Digest
sha256:c4ab385fb5015e1056526244c1aad5cb27aeb13f6ca07b7c14974748554b1989
Description
This MIB module contains HP proprietary extensions to the OSPF-MIB module.
Contact
Hewlett-Packard Company 8000 Foothills Blvd. M/S 5557 Roseville, CA 95747-5557
Imports
| From | Symbols |
|---|---|
| HP-ICF-OID | hpSwitch |
| IANA-RTPROTO-MIB | IANAipRouteProtocol |
| OSPF-MIB | AreaID, BigMetric, Metric, PositiveInteger, ospfAddressLessIf, ospfAreaAggregateEntry, ospfExtLsdbEntry, ospfIfEntry, ospfIfIpAddress, ospfLsdbAreaId, ospfLsdbEntry, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbType, ospfNbrEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HP-ICF-OID HP-ICF-OSPF IANA-RTPROTO-MIB IANAifType-MIB IF-MIB OSPF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HpicfOspfLogAction TEXTUAL-CONVENTION Objects of this type are used to indicate action for every log type. | current | |||
| HpicfOspfLogType TEXTUAL-CONVENTION An enumerated value which indicates the rmon log type for OSPF Routing protocol. | current | |||
| HpicfOspfRouterIdTc TEXTUAL-CONVENTION A 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpicfOspfObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.1 | |||
| hpicfOspfGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1 | |||
| hpicfOspf1583CompatibilityMode OBJECT-TYPE Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'true', the preference rules remain those specified in RFC 1583. When set to 'false', the preference rules are those stated in RFC 2328, which prevent routing loops when AS-external-LSAs for the same destination have been originated from different areas. Set to 'true' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have this object set identically. When there are routers present that have not been updated with the functionality specified in RFC 2328, all routers should have this object set to 'true'. Otherwise, all routers should have this object set to 'false', preventing all routing loops. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.1 | TruthValue | read-write | current |
| hpicfOspfDefaultImportMetric OBJECT-TYPE The default metric used for advertising external routes imported into OSPF by this router. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.2 | BigMetric | read-write | current |
| hpicfOspfDefaultImportMetricType OBJECT-TYPE The default metric type used for advertising external routes imported into OSPF by this router. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.3 | INTEGER {externalType1(1), externalType2(2)} | read-write | current |
| hpicfOspfIntraAreaDistance OBJECT-TYPE The default administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfInterAreaDistance or hpicfOspfExternalDistance is lower than hpicfOspfIntraAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.4 | Integer32 (1..255) | read-write | current |
| hpicfOspfInterAreaDistance OBJECT-TYPE The default administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area routes, even if hpicfOspfInterAreaDistance is lower than hpicfOspfIntraAreaDistance. It will also still prefer inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than hpicfOspfInterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.5 | Integer32 (1..255) | read-write | current |
| hpicfOspfExternalDistance OBJECT-TYPE The default administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes and inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than the hpicfOspfIntraAreaDistance or hpicfOspfInterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.6 | Integer32 (1..255) | read-write | current |
| hpicfOspfSpfThrottleStartInterval OBJECT-TYPE Initial SPF schedule delay | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.7 | Integer32 (0..600) | read-write | current |
| hpicfOspfSpfThrottleWaitInterval OBJECT-TYPE Minimum wait time between two consecutive SPFs. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.8 | Integer32 (0..600) | read-write | current |
| hpicfOspfSpfThrottleMaxWaitTime OBJECT-TYPE Maximum wait time between two consecutive SPFs. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.9 | Integer32 (0..600) | read-write | current |
| hpicfOspfSpfThrottleCurrentSpfInterval OBJECT-TYPE Current dynamic wait interval between SPF computations | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.10 | Unsigned32 | read-only | current |
| hpicfOspfRedistTable OBJECT-TYPE Table for configuring route redistribution into OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2 | not-accessible | current | |
| hpicfOspfRedistEntry OBJECT-TYPE An entry in the table for configuring route redistribution into OSPF from a single source protocol. Entries in this table are not created dynamically. There will be a single entry for each supported source protocol. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1 | not-accessible | current | |
| hpicfOspfRedistSrcProto OBJECT-TYPE Source protocol to redistribute routes from. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.1 | IANAipRouteProtocol | not-accessible | current |
| hpicfOspfRedistEnabled OBJECT-TYPE A flag indicating whether OSPF should redistribute routes from this source protocol. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.2 | TruthValue | read-write | current |
| hpicfOspfRedistRestrictTable OBJECT-TYPE A table of route prefixes for filtering out routes that OSPF should not redistribute. Any route that is contained by a range in this table (in other words, has a longer mask than that specified by hpicfOspfRedistRestrictMask and where the route destination ANDed with the hpicfOspfRedistRestrictMask is equal to hpicfOspfRedistRestrictAddr) will not be redistributed as an AS-external LSA by OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3 | not-accessible | current | |
| hpicfOspfRedistRestrictEntry OBJECT-TYPE A single entry in the table. Any route, regardless of source protocol which is contained within the specified range will not be redistributed into OSPF. Entries in this table are created dynamically using the hpicfOspfRedistRestrictStatus object. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1 | not-accessible | current | |
| hpicfOspfRedistRestrictAddr OBJECT-TYPE The IP address of the range of route entries to exclude from redistribution into OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.1 | IpAddress | not-accessible | current |
| hpicfOspfRedistRestrictMask OBJECT-TYPE The mask for the range of route entries to exclude from redistribution into OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.2 | IpAddress | not-accessible | current |
| hpicfOspfRedistRestrictStatus OBJECT-TYPE The status of this entry. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.3 | RowStatus | read-create | current |
| hpicfOspfLogTable OBJECT-TYPE A table containing the configuration parameters pertaining for OSPF routing protocol logging facility. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4 | not-accessible | current | |
| hpicfOspfLogEntry OBJECT-TYPE The configuration parameters pertaining to a OSPF log entry. Each entry contains information about the action and severity for a particular logType, and for each version of OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1 | not-accessible | current | |
| hpicfOspfLogType OBJECT-TYPE The type of log for every kind of event in OSPF routing protocol . | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.1 | HpicfOspfLogType | not-accessible | current |
| hpicfOspfLogAction OBJECT-TYPE The action, if any, that was taken by the agent when the event represented by hpicfOspfLogType. When enabled, brief information of the event is logged and if it is set to enabledWithDetail, provides more information, like every state changes, will get logged. If it is set to disabled, no events are logged. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.2 | HpicfOspfLogAction | read-write | current |
| hpicfOspfNbrTable OBJECT-TYPE HP proprietary extension to ospfNbrTable to support read-only elements for reading neighbor adjacency length, designated router, backup designated router, Area ID and the and time-to-expiry for an OSPF neighbor | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5 | not-accessible | current | |
| hpicfOspfNbrEntry OBJECT-TYPE Each entry is extension of ospfNbr Entry and gives more information for OSPF neighbors | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1 | not-accessible | current | |
| hpicfOspfNbrUpTime OBJECT-TYPE This object specifies the time duration for which the adjacency with the particular neighbor is active. This should be a monotonically increasing timer for the duration the adjacency is active. This counter should be reset when an adjacency is lost or re-established. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.1 | PositiveInteger | read-only | current |
| hpicfOspfNbrTimeToExpiry OBJECT-TYPE This object specifies the time remaining for the dead timer for the particular neighbor to expire. This counter thus specifies the time in seconds left for an adjacency to be brought down in case no Hello packet is received during the interval. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.2 | PositiveInteger | read-only | current |
| hpicfOspfNbrDesignatedRouter OBJECT-TYPE The IP address of the designated router. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.3 | IpAddress | read-only | current |
| hpicfOspfNbrBackupDesignatedRouter OBJECT-TYPE The IP address of the backup designated router. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.4 | IpAddress | read-only | current |
| hpicfOspfNbrAreaId OBJECT-TYPE A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.5 | AreaID | read-only | current |
| hpicfOspfNbrInterfaceName OBJECT-TYPE The ifName value of this OSPF interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.6 | DisplayString | read-only | current |
| hpicfOspfAreaAggregateTable OBJECT-TYPE HP proprietary extensions to ospfAreaAggregateTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6 | not-accessible | current | |
| hpicfOspfAreaAggregateEntry OBJECT-TYPE Each entry is extension of ospfAreaAggregateEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1 | not-accessible | current | |
| hpicfOspfAreaAggregateCost OBJECT-TYPE Manually configured cost of the summary advertisement. A value of 0 indicates that the cost defined and calculated by the OSPF standard should be used. Valid costs range from 1-16777215 | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.1 | BigMetric | read-create | current |
| hpicfOspfAreaAggregateType OBJECT-TYPE Configure whether external metric and OSPF metric are comparable. If 'metric-type' is specified as 'type1', the external metric and the OSPF metric are considered comparable. 'type2' implies non-comparable metric | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.2 | INTEGER {type1(1), type2(2)} | read-create | current |
| hpicfOspfConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.2 | |||
| hpicfOspfGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1 | |||
| hpicfOspfCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2 | |||
| hpicfOspfReqGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.3 | |||
| hpicfOspfRetransGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.4 | |||
| hpicfOspfFloodGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.5 | |||
| hpicfOspfRouteGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.3 | |||
| hpicfOspfNssaType1 OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.3.1 | |||
| hpicfOspfNssaType2 OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.14.3.2 | |||
| hpicfOspfIfTable OBJECT-TYPE Extensions to the table that contains OSPF Interface specific information. | 1.3.6.1.4.1.11.2.14.11.5.1.14.4 | not-accessible | current | |
| hpicfOspfIfEntry OBJECT-TYPE A list of extensions to the information maintained for an OSPF interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.4.1 | not-accessible | current | |
| hpicfOspfIfPassive OBJECT-TYPE The passive state configuration of the OSPF interface. In the passive mode no OSPF protocol messages are exchanged on this interface. true (1) - The interface is configured to work in Passive mode false (2) - The interface is configured to work in normal mode. This is the default configuration. Changing the value will cause OSPF to reset on this interface and make necessary adjustments to the link state database. All other operations are not defined and will not affect the state of the protocol. | 1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.1 | TruthValue | read-write | current |
| hpicfOspfIfNbrCount OBJECT-TYPE This object specifies the number of OSPFv3 neighbors present in this interface. This counter should be incremented when a new neighbor is added in the network in which this interface is present. It should be decremented when a neighbor is disconnected. | 1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.2 | Unsigned32 | read-only | current |
| hpicfOspfIfStatsTable OBJECT-TYPE Table that contains OSPF Interface traffic specific information. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5 | not-accessible | current | |
| hpicfOspfIfStatsEntry OBJECT-TYPE A list of extensions to the information maintained for an OSPF interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1 | not-accessible | current | |
| hpicfOspfSentHelloPkt OBJECT-TYPE The number of OSPF Hello packets sent on the interface. This number is incremented each time an OSPF Hello packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.1 | Counter32 | read-only | current |
| hpicfOspfSentDDPkt OBJECT-TYPE The number of Database Description packets sent on the interface. This number is incremented each time an OSPF DD packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.2 | Counter32 | read-only | current |
| hpicfOspfSentLSRPkt OBJECT-TYPE The number of Link State Request packet sent on the interface. This number is incremented each time an OSPF LSR packet is sent out of OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.3 | Counter32 | read-only | current |
| hpicfOspfSentLSUPkt OBJECT-TYPE The number of Link State Update packet sent on the interface. This number is incremented each time an OSPF LSU packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.4 | Counter32 | read-only | current |
| hpicfOspfSentLSAPkt OBJECT-TYPE The number of Link State Ack packet sent on the interface. This number is incremented each time an OSPF LSA packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.5 | Counter32 | read-only | current |
| hpicfOspfRcvdHelloPkt OBJECT-TYPE The number of Hello packets received on the interface. This number is incremented each time a hello packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.6 | Counter32 | read-only | current |
| hpicfOspfRcvdDDPkt OBJECT-TYPE The number of Database Description packets received on the interface. This number is incremented each time a OSPF DD packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.7 | Counter32 | read-only | current |
| hpicfOspfRcvdLSRPkt OBJECT-TYPE The number of Link State Request packets received on the interface. This number is incremented each time a OSPF LSR packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.8 | Counter32 | read-only | current |
| hpicfOspfRcvdLSUPkt OBJECT-TYPE The number of Link State Update packets received on the interface. This number is incremented each time a OSPF LSU packet is received on OSPF enabled interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.9 | Counter32 | read-only | current |
| hpicfOspfRcvdLSAPkt OBJECT-TYPE The number of Link State Ack packets received on the interface. This number is incremented each time a OSPF LSA packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.10 | Counter32 | read-only | current |
| hpicfOspfIfErrorTable OBJECT-TYPE Table that contains OSPF Interface traffic specific information. | 1.3.6.1.4.1.11.2.14.11.5.1.14.6 | not-accessible | current | |
| hpicfOspfIfErrorEntry OBJECT-TYPE A list of extensions to the information maintained for an OSPF interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.6.1 | not-accessible | current | |
| hpicfOspfIfErrorType OBJECT-TYPE The hpicfOspfIfErrorType refers to the type of errors in the OSPF packet received on any OSPF enabled interface. Errors could be Invalid RouterID/ AreaID Checksum error, OutOfbound Error ... | 1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.1 | Integer32 (-2147483648..2147483647) | not-accessible | current |
| hpicfOspfIfErrorCount OBJECT-TYPE The hpicfOspfErrorCount is count of each type error packet received on an OSPF interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.2 | Counter32 | read-only | current |
| hpicfOspfIfClearStatsTable OBJECT-TYPE A list used to clear statistics information maintained for an OSPF interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.7 | not-accessible | current | |
| hpicfOspfIfClearStatsEntry OBJECT-TYPE A list used to clear statistics information maintained for an OSPF interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.7.1 | not-accessible | current | |
| hpicfOspfClearCounters OBJECT-TYPE Read of this will always be false, When this variable is set to true for a given Ipaddress interface, corresponding interface counters will be cleared. | 1.3.6.1.4.1.11.2.14.11.5.1.14.7.1.1 | TruthValue | read-write | current |
| hpicfOspfSpfTable OBJECT-TYPE Table that contains OSPF SPF information. | 1.3.6.1.4.1.11.2.14.11.5.1.14.8 | not-accessible | current | |
| hpicfOspfSpfEntry OBJECT-TYPE A list of extensions to the information maintained for OSPF SPF runs. | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1 | not-accessible | current | |
| hpicfOspfSpfInstance OBJECT-TYPE The hpicfospfSpfInstance refers to the instance of SPF Shortest Path First ran for an OSPF instance. | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.1 | Integer32 (-2147483648..2147483647) | not-accessible | current |
| hpicfOspfSpfReason OBJECT-TYPE The hpicfOspfSpfReason refers to the reason for scheduling an SPF run. Reasons could be OSPF init, adding/deleting interface, linkStateUpdate received.. Only last ten SPF run's reasons will be saved. | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.2 | Integer32 | read-only | current |
| hpicfOspfSpfTime OBJECT-TYPE The hpicfOspfSpfTime refers to the time at which SPF run is scheduled. Reasons could be OSPF init, adding/deleting interface, linkStateUpdate received.. Only last ten SPF run's reasons will be saved. | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.3 | Integer32 | read-only | current |
| hpicfOspfReqTable OBJECT-TYPE Request List table that contains OSPF Specific interface information. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9 | not-accessible | current | |
| hpicfOspfReqEntry OBJECT-TYPE A Request List entries that contain fields of link state advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1 | not-accessible | current | |
| hpicfOspfReqType OBJECT-TYPE The type of the Request List's link state advertisement. Each link state type has a separate advertisement format. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.1 | INTEGER {routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7), areaOpaqueLink(10)} | read-only | current |
| hpicfOspfReqLsid OBJECT-TYPE The Request List's Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.2 | IpAddress | read-only | current |
| hpicfOspfReqRouterId OBJECT-TYPE The 32-bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.3 | IpAddress | read-only | current |
| hpicfOspfReqSequence OBJECT-TYPE The Request List's sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.4 | Integer32 | read-only | current |
| hpicfOspfReqAge OBJECT-TYPE This Request list's field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.5 | Integer32 | read-only | current |
| hpicfOspfReqChecksum OBJECT-TYPE This Request list's field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.6 | Integer32 | read-only | current |
| hpicfOspfRetransTable OBJECT-TYPE Retransmission List table that contains Ospf Interface Specific information. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10 | not-accessible | current | |
| hpicfOspfRetransEntry OBJECT-TYPE Retransmission list entry that is maintained for an OSPF Interface. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1 | not-accessible | current | |
| hpicfOspfRetransType OBJECT-TYPE The Retransmission List LSA type. Each link state type has a separate advertisement format. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.1 | INTEGER {routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7), areaOpaqueLink(10)} | read-only | current |
| hpicfOspfRetransLsid OBJECT-TYPE The Retransmission List Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.2 | IpAddress | read-only | current |
| hpicfOspfRetransRouterId OBJECT-TYPE The 32-bit number that uniquely identifies the originating Retransmission List router in the Autonomous System. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.3 | IpAddress | read-only | current |
| hpicfOspfRetransSequence OBJECT-TYPE The Retransmission List sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.4 | Integer32 | read-only | current |
| hpicfOspfRetransAge OBJECT-TYPE This Retransmission List field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.5 | Integer32 | read-only | current |
| hpicfOspfRetransChecksum OBJECT-TYPE This Retransmission field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.6 | Integer32 | read-only | current |
| hpicfOspfFloodTable OBJECT-TYPE Flood list table that contains Ospf Interface Specific information | 1.3.6.1.4.1.11.2.14.11.5.1.14.11 | not-accessible | current | |
| hpicfOspfFloodEntry OBJECT-TYPE A Flood list information maintained for an OSPF Interface | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1 | not-accessible | current | |
| hpicfOspfFloodType OBJECT-TYPE The flood list LSA type .Each link state type has a separate advertisement format. | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.1 | INTEGER {routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7), areaOpaqueLink(10)} | read-only | current |
| hpicfOspfFloodLsid OBJECT-TYPE The flood list Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.2 | IpAddress | read-only | current |
| hpicfOspfFloodRouterId OBJECT-TYPE The 32-bit number that uniquely identifies the originating flood list router in the Autonomous System. | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.3 | IpAddress | read-only | current |
| hpicfOspfFloodSequence OBJECT-TYPE The flood list sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.4 | Integer32 | read-only | current |
| hpicfOspfFloodAge OBJECT-TYPE This flood list field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.5 | Integer32 | read-only | current |
| hpicfOspfFloodChecksum OBJECT-TYPE This flood list field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.6 | Integer32 | read-only | current |
| hpicfOspfSpfTimerElapsed OBJECT-TYPE The elapsed time since the last Ospf Spf is run | 1.3.6.1.4.1.11.2.14.11.5.1.14.12 | Unsigned32 | read-only | current |
| hpicfOspfAreaLsdbTable OBJECT-TYPE The OSPF Process's Area-Scope LSDB. The LSDB contains the Area-Scope Link State Advertisements from throughout the area that the device is attached to. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14 | not-accessible | current | |
| hpicfOspfAreaLsdbEntry OBJECT-TYPE A single Area-Scope Link State Advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1 | not-accessible | current | |
| hpicfOspfAreaLsdbRtrCapBits OBJECT-TYPE This field is valid if the LSA is a Router LSA. It uniquely identifies the router type of the router in the Area. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.1 | Unsigned32 | read-only | current |
| hpicfOspfAreaLsdbOptions OBJECT-TYPE The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. This field is valid for each type of LSA. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.2 | Unsigned32 | read-only | current |
| hpicfOspfAreaLsdbMetric OBJECT-TYPE This field is valid if the LSA is a Router LSA, a Summary LSA, AS Summary LSA or a NSSA LSA. This field indicates the cost involved in using the interface or route. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.3 | Metric | read-only | current |
| hpicfOspfAreaLsdbAddrPrefix OBJECT-TYPE The Prefix the Address. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.4 | Unsigned32 | read-only | current |
| hpicfOspfAreaLsdbFwdingAddress OBJECT-TYPE This field is valid if the LSA is a NSSA LSA. This field is present only if the 'F' Bit is set in the EFT flags field and if included, the data traffic for the advertised destination will be forwarded to this address. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.5 | HpicfOspfRouterIdTc | read-only | current |
| hpicfOspfAreaLsdbExtRouteTags OBJECT-TYPE This field is valid if the LSA is a NSSA LSA. This field is present only if the 'T' Bit is set in the EFT flags field. A 32-bit field which may be used to communicate additional information between AS boundary routers. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.6 | Unsigned32 | read-only | current |
| hpicfOspfTOS OBJECT-TYPE The 32-bit identifier for the TOS specific information of the LSA. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.7 | Unsigned32 | read-only | current |
| hpicfOspfLsdbRouterLinks OBJECT-TYPE This field is valid if the LSA is Router LSA. It holds the information of Number of links in the router LSA. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.8 | Unsigned32 | read-only | current |
| hpicfOspfLsdbBitE OBJECT-TYPE The 32-bit identifier for the Metric specific information of the LSA. | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.9 | Unsigned32 | read-only | current |
| hpicfOspfRouterLSATable OBJECT-TYPE This table having Area scope is a dependent-expansion table for the Router LSA entry in the Area LSDB table. It represents the list of per interface details advertised in a Router LSA. | 1.3.6.1.4.1.11.2.14.11.5.1.14.15 | not-accessible | current | |
| hpicfOspfRouterLSAEntry OBJECT-TYPE A single Area-Scope Link State Advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1 | not-accessible | current | |
| hpicfOspfRouterLSANbrRtrId OBJECT-TYPE The router id of the router which is connected over the interface Id. | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.1 | HpicfOspfRouterIdTc | not-accessible | current |
| hpicfOspfRouterLSAIfType OBJECT-TYPE The 32-bit identifier of the Area from which the LSA was received. | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.2 | Unsigned32 | read-only | current |
| hpicfOspfRouterLSAMetric OBJECT-TYPE This field indicates the cost involved in using the interface or route. | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.3 | Metric | read-only | current |
| hpicfOspfRouterLSAIfId OBJECT-TYPE The interface Id of the router that connects to the other router. | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.4 | HpicfOspfRouterIdTc | read-only | current |
| hpicfOspfRouterLSATOSMetric OBJECT-TYPE This field indicates the cost involved in using the interface or route specific to TOS. | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.5 | Unsigned32 (0..4294967295) | read-only | current |
| hpicfOspfNetworkLSATable OBJECT-TYPE This table having Area scope is a dependent-expansion table for the Network LSA entry in the Area LSDB table. This table represents the list of routers advertised in a Network LSA. | 1.3.6.1.4.1.11.2.14.11.5.1.14.16 | not-accessible | current | |
| hpicfOspfNetworkLSAEntry OBJECT-TYPE A single Area-Scope Link State Advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.16.1 | not-accessible | current | |
| hpicfOspfNetworkLSASeqNum OBJECT-TYPE The 32-bit sequence number identifying the attached router-ids. | 1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.1 | Unsigned32 | not-accessible | current |
| hpicfOspfNetworkLSAAttachedRouter OBJECT-TYPE The 32-bit Router identifier of the attached Router. | 1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.2 | HpicfOspfRouterIdTc | read-only | current |
| hpicfOspfExtLsdbTable OBJECT-TYPE The OSPF Process's AS-Scope Link State Database (LSDB). The LSDB contains the AS-Scope Link State Advertisements from throughout the areas that the device is attached to. | 1.3.6.1.4.1.11.2.14.11.5.1.14.17 | not-accessible | current | |
| hpicfOspfExtLsdbEntry OBJECT-TYPE A single AS-Scope Link State Advertisement. | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1 | not-accessible | current | |
| hpicfOspfExtLsdbMetric OBJECT-TYPE The cost associated with this route. | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.1 | Unsigned32 | read-only | current |
| hpicfOspfExtLsdbOptions OBJECT-TYPE The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.2 | Unsigned32 | read-only | current |
| hpicfOspfExtLsdbFwdingAddress OBJECT-TYPE If included, Data traffic for the advertised destination will be forwarded to this address. | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.3 | HpicfOspfRouterIdTc | read-only | current |
| hpicfOspfExtLsdbExtRouteTags OBJECT-TYPE The 32-bit Router Tags for the advertised Route. | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.4 | Unsigned32 | read-only | current |
| hpicfOspfExtLsdbBitE OBJECT-TYPE The type of External metric. If bit E is set, the metric specified is Type 2 external metric. | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.5 | Unsigned32 | read-only | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hpicfOspfBaseGroup OBJECT-GROUP Basic OSPF configuration information that is not in the standard OSPF MIB. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.1 | current |
| hpicfOspfRedistGroup OBJECT-GROUP A collection of objects for controlling the redistribution of external routes by OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.2 | current |
| hpicfOspfDistanceGroup OBJECT-GROUP A collection of objects for configuring the administrative distance of routes learned by OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.3 | current |
| hpicfOspfStatisticGroup OBJECT-GROUP A collection of objects that contain OSPF interface and SPF statistics. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.4 | current |
| hpicfOspfSpfTimerGroup OBJECT-GROUP Time taken since the last spf Run. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.5 | current |
| hpicfOspfLogGroup OBJECT-GROUP A collection of objects for configuring the logging of OSPF events. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.6 | current |
| hpicfOspfNbrGroup OBJECT-GROUP A collection of read-only elements for an OSPF neighbor. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.7 | current |
| hpicfOspfIfGroup OBJECT-GROUP These interface objects used for managing/monitoring OSPFv2 interfaces. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.8 | current |
| hpicfOspfAreaLsdbGroup OBJECT-GROUP These objects used for managing/monitoring OSPFv2 LSAs. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.9 | current |
| hpicfOspfExtLsdbGroup OBJECT-GROUP These objects are used for OSPFv2 systems that display their AS-scope link state database. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.10 | current |
| hpicfOspfAreaAggregateGroup OBJECT-GROUP Group for ospfAreaAggregate objects. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.11 | current |
| hpicfOspfSpfDelayGroup OBJECT-GROUP Group for ospfSpfThrottle objects. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.12 | current |
| hpicfOspfAreaAggregateGroup1 OBJECT-GROUP Group for ospfAreaAggregateType objects. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.13 | current |
| hpicfOspfCompliance MODULE-COMPLIANCE The compliance statement for HP Routing Switches that support OSPF. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.1 | current |
| hpicfOspfReqCompliance MODULE-COMPLIANCE The compliance statement for show Requestlist command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.2 | current |
| hpicfOspfFloodCompliance MODULE-COMPLIANCE The compliance statement for show Floodlist command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.3 | current |
| hpicfOspfRetransCompliance MODULE-COMPLIANCE The compliance statement for show Retranslist command. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.4 | current |
| hpicfOspfCompliance1 MODULE-COMPLIANCE The compliance statement for this module. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.5 | current |
| hpicfOspfSpfDelayCompliance MODULE-COMPLIANCE The compliance statement for this module. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.6 | current |
| hpicfOspfAreaAggregateCompliance MODULE-COMPLIANCE The compliance statement for this module. | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.7 | current |
| hpicfOspfReqManGroup OBJECT-GROUP A mandatory group that displays ID information with Respect to Link state,router,interface and the LSA type | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.3.1 | current |
| hpicfOspfReqGroup OBJECT-GROUP This is a normal group that gives checksum,sequence and age related information | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.3.2 | current |
| hpicfOspfRetransManGroup OBJECT-GROUP A mandatory group that displays ID information with Respect to Link state,router,interface and the LSA type | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.4.1 | current |
| hpicfOspfRetransGroup OBJECT-GROUP This is a normal group that gives checksum,sequence and age related information | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.4.2 | current |
| hpicfOspfFloodManGroup OBJECT-GROUP A mandatory group that displays ID information with Respect to Link state, router, interface and the LSA type | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.5.1 | current |
| hpicfOspfFloodGroup OBJECT-GROUP This is a normal group that gives checksum,sequence and age related information | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.5.2 | current |