MIBs Depot

H3C-ENTITY-EXT-MIB

Registered at
1.3.6.1.4.1.2011.10.2.6
Last updated
2011-11-26 00:00
Organization
Hangzhou H3C Technologies Co., Ltd.
Namespace
huawei
Source file
H3C-ENTITY-EXT-MIB
Digest
sha256:fc6d04f6dded781381e07491944260ec0400e8c68e892f11393aa139e201d840

Description

The private MIB file includes the general extent information of the device.

Contact

Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085

Imports

FromSymbols
ENTITY-MIBentPhysicalDescr, entPhysicalIndex, entPhysicalName
HUAWEI-3COM-OID-MIBh3cCommon
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ENTITY-MIB
H3C-ENTITY-EXT-MIB
HUAWEI-3COM-OID-MIB
IANA-ENTITY-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
H3cAdminState
TEXTUAL-CONVENTION
The administrative state for this object, and it is possible to set the state when needed. A value of locked means the resource is administratively prohibited from use. A value of shuttingDown means that usage is administratively limited to current instances of use. A value of unlocked means the resource is not administratively prohibited from use.
current
H3cAlarmStatus
TEXTUAL-CONVENTION
Represents the possible values of alarm status. When no bits of this attribute are set, then none of the status conditions described below are present. When the value of under repair is set, the resource is currently being repaired. When the value of critical is set, one or more critical alarms are active against the resource. When the value of major is set, one or more major alarms are active against the resource. When the value of minor is set, one or more minor alarms are active against the resource. When the value of warning is set, one or more warning alarms are active against the resource. When the value of indeterminate is set, one or more alarms of indeterminate severity are active against the resource. When the value of alarm outstanding is set, one or more alarms is active against the resource. The fault may or may not be disabling.
current
H3cOperState
TEXTUAL-CONVENTION
Represents the possible values of operational states. A value of disabled means the resource is totally inoperable. A value of enabled means the resource is partially or fully operable.
current
H3cStandbyStatus
TEXTUAL-CONVENTION
Represents the possible values of standby status. A value of hotStandby means the resource is not providing service, but is will be immediately able to take over the role of the resource to be backed-up, without the need for initialization activity, and will contain the same information as the resource to be backed up. A value of coldStandy means that the resource is to back-up another resource, but will not be immediately able to take over the role of a resource to be backed up, and will require some initialization activity. A value of providingService means the resource is providing service.
current

Objects

NameOIDSyntaxAccessStatus
h3cEntityExtObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.1
h3cEntityExtState
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.1.1
h3cEntityExtStateTable
OBJECT-TYPE
This table contains one row per physical entity, There is always at least one row for an 'overall' physical entity. The information in each row may be not include all the object in this table, because of the entity need not some of the information here.
1.3.6.1.4.1.2011.10.2.6.1.1.1not-accessiblecurrent
h3cEntityExtStateEntry
OBJECT-TYPE
The information about a particular physical entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1not-accessiblecurrent
h3cEntityExtPhysicalIndex
OBJECT-TYPE
The index of h3cEntityExtStateTable. This index is identical to entPhysicalIndex in ENTITY-MIB
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.1Integer32accessible-for-notifycurrent
h3cEntityExtAdminStatus
OBJECT-TYPE
The administrative state for this object.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.2H3cAdminStateread-writecurrent
h3cEntityExtOperStatus
OBJECT-TYPE
The operate state for this object.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.3H3cOperStateread-onlycurrent
h3cEntityExtStandbyStatus
OBJECT-TYPE
This object is used for monitoring standby status. Not all entities support this object.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.4H3cStandbyStatusread-onlycurrent
h3cEntityExtAlarmLight
OBJECT-TYPE
The alarm status for this entity. It does not include the severity of alarms raised on child components. In this condition, there will be a alarm light on the entity, the object should have the same status with it.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.5H3cAlarmStatusread-onlycurrent
h3cEntityExtCpuUsage
OBJECT-TYPE
The CPU usage for this entity. Generally, the CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.6Integer32 (0..100)read-onlycurrent
h3cEntityExtCpuUsageThreshold
OBJECT-TYPE
The threshold for the CPU usage. When the CPU usage exceeds the threshold, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.7Integer32 (0..100)read-writecurrent
h3cEntityExtMemUsage
OBJECT-TYPE
The memory usage for the entity. This object indicates what percent of memory are used.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.8Integer32 (0..100)read-onlycurrent
h3cEntityExtMemUsageThreshold
OBJECT-TYPE
The threshold for the Memory usage, When the memory usage exceeds the threshold, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.9Integer32 (0..100)read-writecurrent
h3cEntityExtMemSize
OBJECT-TYPE
The size of memory for the entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.10Unsigned32read-onlycurrent
h3cEntityExtUpTime
OBJECT-TYPE
The uptime for the entity. The meaning of uptime is when the entity is up, and the value of the object will add 1 seconds while the entity is running.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.11Integer32read-onlycurrent
h3cEntityExtTemperature
OBJECT-TYPE
The temperature for the entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.12Integer32read-onlycurrent
h3cEntityExtTemperatureThreshold
OBJECT-TYPE
The threshold for the temperature. When the temperature exceeds the threshold, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.13Integer32read-writecurrent
h3cEntityExtVoltage
OBJECT-TYPE
The voltage for the entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.14Integer32read-onlycurrent
h3cEntityExtVoltageLowThreshold
OBJECT-TYPE
The low-threshold for the voltage. When voltage is lower than low-threshold, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.15Integer32read-writecurrent
h3cEntityExtVoltageHighThreshold
OBJECT-TYPE
The high-threshold for the voltage. When voltage greater than high-threshold, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.16Integer32read-writecurrent
h3cEntityExtCriticalTemperatureThreshold
OBJECT-TYPE
The threshold for the critical Temperature. When temperature exceeds the critical temperature, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.17Integer32read-writecurrent
h3cEntityExtMacAddress
OBJECT-TYPE
MAC Address of the entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.18MacAddressread-onlycurrent
h3cEntityExtErrorStatus
OBJECT-TYPE
Indicate the error state of this entity object. Now it only supports Port, general power supply, RPS power supply and board/Subcard. It may have one of these values. The following four values can be used for all kinds of entities. notSupported(1) means this entity can not support this function. normal(2) means the statement of this entity is normal. for ports, it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and half-duplex. For fan, power supply and board-Subcard, it means their states are normal. postFailure(3) means the entity fails to POST. entityAbsent(4) means the entity is absent now. The following values is depended on the entity . For Port entities, it may have the following values. If its POST is failure, then the value of the instance will be postFailure(3), otherwise the value will be normal(2). If enable power supply over Ethernet on this port is failure, the value of this instance will be poeError(11), otherwise it will be normal(2). For stack port, if it connects to another stack port normally, and these two units merge into one stack, then the value of this instance will be normal(2). If something wrong occurs and the unit can not merge into stack, the value of this instance will be stackPortFailed(23). If the stack port forms resilient daisy chain with another stack port on the other unit, the value of this instance will be stackPortBlocked(22). For SFP ports, if it fail to receive, the value of this instance will be sfpRecvError(31), if it fail to send, the value is sfpSendError(32), if it fail to send and receive, the value is sfpBothError(33), otherwise it will be normal(2). fanError(41) means that the fan stops working. psuError(51) means that the Power Supply Unit is in the state of fault. rpsError(61) means the RPS is in the state of fault. moduleFaulty(71) means the Module is in the state of fault. sensorError(81) means the sensor is in the state of fault. hardwareFaulty(91) means the hardware of specified entity is in the state of fault. NMS must be compatible with the states which may be added in the future.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.19INTEGER {notSupported(1), normal(2), postFailure(3), entityAbsent(4), poeError(11), stackError(21), stackPortBlocked(22), stackPortFailed(23), sfpRecvError(31), sfpSendError(32), sfpBothError(33), fanError(41), psuError(51), rpsError(61), moduleFaulty(71), sensorError(81), hardwareFaulty(91)}read-onlycurrent
h3cEntityExtCpuMaxUsage
OBJECT-TYPE
The maximal CPU usage for the entity in the period of time.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.20Integer32 (0..100)read-onlycurrent
h3cEntityExtLowerTemperatureThreshold
OBJECT-TYPE
The threshold for the lower Temperature. When temperature runs under the threshold, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.21Integer32read-writecurrent
h3cEntityExtShutdownTemperatureThreshold
OBJECT-TYPE
The threshold for the shutdown Temperature. When temperature exceeds the threshold, a notification will be sent and the entity will be shutdown.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.22Integer32read-writecurrent
h3cEntityExtPhyMemSize
OBJECT-TYPE
The memory size of entity. This is the physical attribute of entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.23Unsigned32read-onlycurrent
h3cEntityExtPhyCpuFrequency
OBJECT-TYPE
The CPU frequency of entity. Unit of measure is MHZ.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.24Integer32read-onlycurrent
h3cEntityExtFirstUsedDate
OBJECT-TYPE
The first used date of the entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.25DateAndTime (SIZE(8))read-onlycurrent
h3cEntityExtCpuAvgUsage
OBJECT-TYPE
The average CPU usage for the entity in a period of time.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.26Integer32 (0..100)read-onlycurrent
h3cEntityExtMemAvgUsage
OBJECT-TYPE
The average memory usage for the entity in a period of time.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.27Integer32 (0..100)read-onlycurrent
h3cEntityExtMemType
OBJECT-TYPE
The memory type of entity.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.28OCTET STRING (SIZE(0..64))read-onlycurrent
h3cEntityExtCriticalLowerTemperatureThreshold
OBJECT-TYPE
The threshold for the critical Temperature. When temperature exceeds the critical lower temperature, a notification will be sent.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.29Integer32read-writecurrent
h3cEntityExtShutdownLowerTemperatureThreshold
OBJECT-TYPE
The threshold for the shutdown Temperature. When temperature exceeds the lower threshold, a notification will be sent and the entity will be shutdown.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.30Integer32read-writecurrent
h3cEntityExtCpuUsageRecoverThreshold
OBJECT-TYPE
The recover threshold for the CPU usage. When the CPU usage falls down to the threshold, a notification is sent. The h3cEntityExtCpuUsageRecoverThreshold must be less than or equal to the h3cEntityExtCpuUsageThreshold.
1.3.6.1.4.1.2011.10.2.6.1.1.1.1.31Integer32 (0..100)read-writecurrent
h3cEntityExtManu
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.1.2
h3cEntityExtManuTable
OBJECT-TYPE
The table about device manufacture information.
1.3.6.1.4.1.2011.10.2.6.1.2.1not-accessiblecurrent
h3cEntityExtManuEntry
OBJECT-TYPE
The device manufacture information about a particular physical entity.
1.3.6.1.4.1.2011.10.2.6.1.2.1.1not-accessiblecurrent
h3cEntityExtManuPhysicalIndex
OBJECT-TYPE
The index of h3cEntityExtManuTable. This index is identical to entPhysicalIndex in ENTITY-MIB.
1.3.6.1.4.1.2011.10.2.6.1.2.1.1.1Integer32 (1..2147483647)accessible-for-notifycurrent
h3cEntityExtManuSerialNum
OBJECT-TYPE
Manufacture serial number. The manufacture serial number of the entity such as chassis, module, and so on. It is got from the device when manufacturing. For low level box-device, the manufacture serial number is the device-number of System Control Board(SCB for short), it is written into the SCB directly; for middle level or high level frame-device, the manufacture serial number is the device-numbers of SCB and Service Board, because the SCB, Service Board and chassis are separate to sale and the device-number of chassis can not be written into board.
1.3.6.1.4.1.2011.10.2.6.1.2.1.1.2SnmpAdminStringread-onlycurrent
h3cEntityExtManuBuildInfo
OBJECT-TYPE
Device version information. The device version information of the entity such as chassis, module, and so on. It consists of software version information and hardware version information.
1.3.6.1.4.1.2011.10.2.6.1.2.1.1.3SnmpAdminStringread-onlycurrent
h3cEntityExtManuBOM
OBJECT-TYPE
Device BOM code. The device BOM code of the entity such as chassis, module, and so on. It is the component code of ERP system, which can be disassembled from device-number.
1.3.6.1.4.1.2011.10.2.6.1.2.1.1.4SnmpAdminStringread-onlycurrent
h3cEntityExtMacAddressCount
OBJECT-TYPE
MAC address count. The count of MAC addresses of the entity, such as chassis, module, or port, and so on.
1.3.6.1.4.1.2011.10.2.6.1.2.1.1.5Unsigned32read-onlycurrent
h3cEntityExtPower
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.1.3
h3cEntityExtPowerTable
OBJECT-TYPE
This table describes the power information of all the physical entity on the device, such as the fans, the subcards, the boards, etc.
1.3.6.1.4.1.2011.10.2.6.1.3.1not-accessiblecurrent
h3cEntityExtPowerEntry
OBJECT-TYPE
The entity power information about a particular physical entity.
1.3.6.1.4.1.2011.10.2.6.1.3.1.1not-accessiblecurrent
h3cEntityExtPowerPhysicalIndex
OBJECT-TYPE
The index of h3cEntityExtPowerTable. This index is identical to entPhysicalIndex in ENTITY-MIB.
1.3.6.1.4.1.2011.10.2.6.1.3.1.1.1Integer32 (1..2147483647)accessible-for-notifycurrent
h3cEntityExtNominalPower
OBJECT-TYPE
The nominal power of the entity expressed in milliWatts.
1.3.6.1.4.1.2011.10.2.6.1.3.1.1.2Gauge32read-onlycurrent
h3cEntityExtCurrentPower
OBJECT-TYPE
The measured usage power of the entity expressed in milliWatts.
1.3.6.1.4.1.2011.10.2.6.1.3.1.1.3Gauge32read-onlycurrent
h3cEntityExtAveragePower
OBJECT-TYPE
The average power consumed by the entity expressed in milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
1.3.6.1.4.1.2011.10.2.6.1.3.1.1.4Integer32read-writecurrent
h3cEntityExtPeakPower
OBJECT-TYPE
The peak power consumed by the entity expressed in milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
1.3.6.1.4.1.2011.10.2.6.1.3.1.1.5Integer32read-writecurrent
h3cProcessObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.1.4
h3cProcessTable
OBJECT-TYPE
The Table describes the information about a particular process, namely a task.
1.3.6.1.4.1.2011.10.2.6.1.4.1not-accessiblecurrent
h3cProcessEntry
OBJECT-TYPE
The information about a particular process, namely a task.
1.3.6.1.4.1.2011.10.2.6.1.4.1.1not-accessiblecurrent
h3cProcessID
OBJECT-TYPE
This object indicates the identifier of process, namely task ID in system.
1.3.6.1.4.1.2011.10.2.6.1.4.1.1.1Unsigned32read-onlycurrent
h3cProcessName
OBJECT-TYPE
This object indicates the process name.
1.3.6.1.4.1.2011.10.2.6.1.4.1.1.2DisplayString (SIZE(1..32))read-onlycurrent
h3cProcessUtil5Min
OBJECT-TYPE
This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. The ratio is calculated by the overall CPU usage caused by the process.
1.3.6.1.4.1.2011.10.2.6.1.4.1.1.3Unsigned32 (0..100)read-onlycurrent
h3cEntityExtTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.2
h3cEntityExtTrapsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.2.0
h3cEntityExtTrapsInfor
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.2.1
h3cEntityExtTrapDescription
OBJECT-TYPE
The information of trap.
1.3.6.1.4.1.2011.10.2.6.2.1.1SnmpAdminString (SIZE(0..255))accessible-for-notifycurrent
h3cEntityExtECCParityAlarmStatus
OBJECT-TYPE
ECC parity error.
1.3.6.1.4.1.2011.10.2.6.2.1.2INTEGER {other(1), l1cache(2), l2cache(3), sdram(4), mac(5), tcam(6), ingressbuffer(7), egressbuffer(8), lpm(9), controlmemory(10)}accessible-for-notifycurrent
h3cEntityExtSFPInvalidInDays
OBJECT-TYPE
The days when the transceiver module is still valid, but after those days, it will be invaldated.
1.3.6.1.4.1.2011.10.2.6.2.1.3Integer32accessible-for-notifycurrent
h3cEntityExtFirstTrapTime
OBJECT-TYPE
Represents the first trap time.
1.3.6.1.4.1.2011.10.2.6.2.1.4TimeTicksaccessible-for-notifycurrent
h3cEntityExtConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.3
h3cEntityExtCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.3.1
h3cEntityExtGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.6.3.2

Notifications

NameOIDStatus
h3cEntityExtTemperatureThresholdNotification
NOTIFICATION-TYPE
The h3cEntityExtTemperatureThresholdNotification indicates the temperature exceeded the threshold. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition.
1.3.6.1.4.1.2011.10.2.6.2.0.1current
h3cEntityExtVoltageLowThresholdNotification
NOTIFICATION-TYPE
The h3cEntityExtVoltageLowThresholdNotification indicates the voltage is lower than the threshold. If the voltage is lower too much than the entity needs, the entity will halt.
1.3.6.1.4.1.2011.10.2.6.2.0.2current
h3cEntityExtVoltageHighThresholdNotification
NOTIFICATION-TYPE
The h3cEntityExtVoltageHighThresholdNotification indicates the voltage is higher than the threshold. If the voltage is higher too much than the entity needs, The entity may be damaged by the high voltage.
1.3.6.1.4.1.2011.10.2.6.2.0.3current
h3cEntityExtCpuUsageThresholdNotfication
NOTIFICATION-TYPE
The h3cEntityExtCpuUsageThresholdNotfication indicates the entity is overloaded.
1.3.6.1.4.1.2011.10.2.6.2.0.4current
h3cEntityExtMemUsageThresholdNotification
NOTIFICATION-TYPE
The h3cEntityExtMemUsageThresholdNotification indicates the entity is overloaded.
1.3.6.1.4.1.2011.10.2.6.2.0.5current
h3cEntityExtOperEnabled
NOTIFICATION-TYPE
The trap indicates the entity is operable at present.
1.3.6.1.4.1.2011.10.2.6.2.0.6current
h3cEntityExtOperDisabled
NOTIFICATION-TYPE
The trap indicates the entity is not operable at present.
1.3.6.1.4.1.2011.10.2.6.2.0.7current
h3cEntityExtCriticalTemperatureThresholdNotification
NOTIFICATION-TYPE
The h3cEntityExtCriticalTemperatureThresholdNotification indicates the temperature exceeds the critical temperature. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition.
1.3.6.1.4.1.2011.10.2.6.2.0.8current
h3cEntityExtSFPAlarmOn
NOTIFICATION-TYPE
The trap is generated when the SFP module fails or runs abnormally for some particular reason.
1.3.6.1.4.1.2011.10.2.6.2.0.9current
h3cEntityExtSFPAlarmOff
NOTIFICATION-TYPE
The trap is generated when the SFP module restores to normal status.
1.3.6.1.4.1.2011.10.2.6.2.0.10current
h3cEntityExtSFPPhony
NOTIFICATION-TYPE
This module is NOT sold by authorized manufacturer. The normal function of the device or assume the maintenance responsibility thereof will NOT be guaranteed. The trap is generated periodically after a phony module has been found.
1.3.6.1.4.1.2011.10.2.6.2.0.11current
h3cEntityInsert
NOTIFICATION-TYPE
The trap is generated when a removeable entity inserting to device.
1.3.6.1.4.1.2011.10.2.6.2.0.12current
h3cEntityRemove
NOTIFICATION-TYPE
The trap is generated when a removeable entity removing from device.
1.3.6.1.4.1.2011.10.2.6.2.0.13current
h3cEntityExtForcedPowerOff
NOTIFICATION-TYPE
The trap indicates the entity is forced to power off.
1.3.6.1.4.1.2011.10.2.6.2.0.14current
h3cEntityExtForcedPowerOn
NOTIFICATION-TYPE
The trap indicates the entity is forced to power on.
1.3.6.1.4.1.2011.10.2.6.2.0.15current
h3cEntityExtFaultAlarmOn
NOTIFICATION-TYPE
The trap indicates a fault occures on the specified entity.
1.3.6.1.4.1.2011.10.2.6.2.0.16current
h3cEntityExtFaultAlarmOff
NOTIFICATION-TYPE
The trap indicates a fault disappears on the specified entity.
1.3.6.1.4.1.2011.10.2.6.2.0.17current
h3cEntityExtResourceLack
NOTIFICATION-TYPE
The trap indicates that a kind of resource is not enough on the specified entity.
1.3.6.1.4.1.2011.10.2.6.2.0.18current
h3cEntityExtResourceEnough
NOTIFICATION-TYPE
The trap indicates that the entity recovers from the status of no enough resource.
1.3.6.1.4.1.2011.10.2.6.2.0.19current
h3cEntityExtTemperatureLower
NOTIFICATION-TYPE
The trap indicates the temperature of a specified entity is under the lower threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason.
1.3.6.1.4.1.2011.10.2.6.2.0.20current
h3cEntityExtTemperatureTooUp
NOTIFICATION-TYPE
The trap indicates the temperature of a specified entity exceeded the shutdown threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason.
1.3.6.1.4.1.2011.10.2.6.2.0.21current
h3cEntityExtTemperatureNormal
NOTIFICATION-TYPE
The trap indicates the temperature of a specified entity recover from abnormal status.
1.3.6.1.4.1.2011.10.2.6.2.0.22current
h3cEntityExternalAlarmOccur
NOTIFICATION-TYPE
The trap is generated when the monitored device connected to the specified entity fails.
1.3.6.1.4.1.2011.10.2.6.2.0.23current
h3cEntityExternalAlarmRecover
NOTIFICATION-TYPE
The trap is generated when the failed device connected to the specified entity returns to normal.
1.3.6.1.4.1.2011.10.2.6.2.0.24current
h3cEntityExtCpuUsageThresholdRecover
NOTIFICATION-TYPE
The trap indicates the CPU usage descends the threshold.
1.3.6.1.4.1.2011.10.2.6.2.0.25current
h3cEntityExtMemUsageThresholdRecover
NOTIFICATION-TYPE
The trap indicates the memory usage descends the threshold.
1.3.6.1.4.1.2011.10.2.6.2.0.26current
h3cEntityExtMemAllocatedFailed
NOTIFICATION-TYPE
The trap indicates the memory allocated failed.
1.3.6.1.4.1.2011.10.2.6.2.0.27current
h3cEntityExtECCParityAlarm
NOTIFICATION-TYPE
The trap indicates the ECC(Error Correction Code) parity error alarm.
1.3.6.1.4.1.2011.10.2.6.2.0.28current
h3cEntityExtCritLowerTempThresholdNotification
NOTIFICATION-TYPE
The h3cEntityExtCritLowerTempThresholdNotification indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity will halt.
1.3.6.1.4.1.2011.10.2.6.2.0.29current
h3cEntityExtTemperatureTooLow
NOTIFICATION-TYPE
The h3cEntityExtTemperatureTooLow indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity halts now.
1.3.6.1.4.1.2011.10.2.6.2.0.30current
h3cEntityExtFanDirectionNotPreferred
NOTIFICATION-TYPE
This trap indicates the specified fan's direction does not accord with preferred. The two parameters indicate the entity index and physical name of fan.
1.3.6.1.4.1.2011.10.2.6.2.0.31current
h3cEntityExtFanDirectionNotAccord
NOTIFICATION-TYPE
This trap indicates the direction of fans does not accord with each other. The two parameters indicate the parent entity of the fans.
1.3.6.1.4.1.2011.10.2.6.2.0.32current
h3cEntityExtSFPInvalid
NOTIFICATION-TYPE
The transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The transceiver module will be invalidated in days. Please replace it with a compatible one as soon as possible. The trap is generated periodically after a phony transceiver module has been found.
1.3.6.1.4.1.2011.10.2.6.2.0.33current
h3cEntityExtSFPInvalidNow
NOTIFICATION-TYPE
This transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The trap is generated after a phony transceiver module has been found.
1.3.6.1.4.1.2011.10.2.6.2.0.34current

Conformance

NameOIDStatus
h3cEntityExtCompliance
MODULE-COMPLIANCE
The compliance statement for systems supporting this MIB.
1.3.6.1.4.1.2011.10.2.6.3.1.1current
h3cEntityExtGroup
OBJECT-GROUP
Entity Extend group.
1.3.6.1.4.1.2011.10.2.6.3.2.1current
h3cEntityExtNotificationGroup
NOTIFICATION-GROUP
Entity Extend Notification group.
1.3.6.1.4.1.2011.10.2.6.3.2.2current
h3cEntityExtManuGroup
OBJECT-GROUP
Standard Device Manufacture Information group.
1.3.6.1.4.1.2011.10.2.6.3.2.3current
h3cEntityExtPowerGroup
OBJECT-GROUP
Standard Entity Power Information group.
1.3.6.1.4.1.2011.10.2.6.3.2.4current