MIBs Depot

FOUNDRY-SN-STACKING-MIB

Registered at
1.3.6.1.4.1.1991.1.1.3.31
Last updated
2010-06-02 00:00
Organization
Brocade Communications Systems, Inc.
Revisions
2010-06-02 00:00, 2008-05-05 00:00
Namespace
extreme
Source file
FOUNDRY-SN-STACKING-MIB
Digest
sha256:4e6c8e6ca859a8f3da5d4528b8b26432e7fc28c1352ad0ad7fc2375478c50c1c

Description

Management Information for stacking system configuration and operational status. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.

Contact

Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com

Imports

FromSymbols
FOUNDRY-SN-AGENT-MIBDisplayString
FOUNDRY-SN-SWITCH-GROUP-MIBsnSwitch
IF-MIBInterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

FOUNDRY-SN-AGENT-MIB
FOUNDRY-SN-ROOT-MIB
FOUNDRY-SN-STACKING-MIB
FOUNDRY-SN-SWITCH-GROUP-MIB
HCNUM-TC
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
snStackingGlobalObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.1.3.31.1
snStackingGlobalConfigState
OBJECT-TYPE
Configure stack state for stacking feature on the global level. none: neutral, receive packets only enable: stacking is enable, send and receive packets disable: stacking is disable, No send and receive packets
1.3.6.1.4.1.1991.1.1.3.31.1.1INTEGER {none(0), enabled(1), disabled(2)}read-writecurrent
snStackingGlobalMacAddress
OBJECT-TYPE
Management MAC address of the stacking system. This is available to change management MAC address of stack for administrative purpose. It is strongly recommended that this command should be used with upmost caution to prevent duplicate MAC address and must reboot the system to take an effect. It is mutually exclusive from enabling the persistent MAC timer. Enter zero MAC address to remove the configured MAC address
1.3.6.1.4.1.1991.1.1.3.31.1.2MacAddressread-writecurrent
snStackingGlobalPersistentMacTimerState
OBJECT-TYPE
Configure persistent MAC timer state for stacking feature on the global level. enable: the persistent MAC timer is active and configured. The persistent MAC timer is set as the default timer (60 minutes) disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC address and use new active stack unit's base MAC address
1.3.6.1.4.1.1991.1.1.3.31.1.3INTEGER {enabled(0), disabled(1)}read-writecurrent
snStackingGlobalPersistentMacTimer
OBJECT-TYPE
Persistent MAC timer in minutes for the stacking system Number of minutes to retain original active stack unit's base MAC address in event of active unit crash or removal. This timer is triggered when new active unit is elected. When timer expires, new active unit will change stacking MAC to its own base MAC address and advertise its own base MAC address to management VLAN to update the ARP table of peers. If you decide to use new active unit's MAC address, one must enter this timer again to reactivate the persistent MAC. 0 - keep it forever. 5 to 3600 - valid value range. 60 - default value.
1.3.6.1.4.1.1991.1.1.3.31.1.4Integer32read-writecurrent
snStackingGlobalTopology
OBJECT-TYPE
The topology of the stacking system
1.3.6.1.4.1.1991.1.1.3.31.1.5INTEGER {other(1), chain(2), ring(3), standalone(4)}read-onlycurrent
snStackingTableObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.1.3.31.2
snStackingConfigUnitTable
OBJECT-TYPE
Stacking configuration unit table.
1.3.6.1.4.1.1991.1.1.3.31.2.1not-accessiblecurrent
snStackingConfigUnitEntry
OBJECT-TYPE
An entry in the stacking configuration table.
1.3.6.1.4.1.1991.1.1.3.31.2.1.1not-accessiblecurrent
snStackingConfigUnitIndex
OBJECT-TYPE
The stacking unit Id
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1Integer32not-accessiblecurrent
snStackingConfigUnitPriority
OBJECT-TYPE
The priority in Active/backup eclection.
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2Integer32 (0..255)read-writecurrent
snStackingConfigUnitConfigStackPort
OBJECT-TYPE
The IfIndex for the configured stacking port. If no stacking port is configured, it will be displayed zero and the first two 10G ports as the default stacking ports. Enter zero to remove the configured stacking port.
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3InterfaceIndexOrZeroread-writecurrent
snStackingConfigUnitRowStatus
OBJECT-TYPE
This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4INTEGER {other(1), valid(2), delete(3)}read-writecurrent
snStackingConfigUnitType
OBJECT-TYPE
A description of the configured/active system type for each unit.
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5DisplayStringread-onlycurrent
snStackingConfigUnitState
OBJECT-TYPE
A state for each unit
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6INTEGER {local(1), remote(2), reserved(3), empty(4)}read-onlycurrent
snStackingConfigUnitStackPort1
OBJECT-TYPE
First stack port for each unit. It returns 0 if stack port does not exist.
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7InterfaceIndexOrZeroread-onlycurrent
snStackingConfigUnitStackPort2
OBJECT-TYPE
Second stack port for each unit. It returns 0 if stack port does not exist.
1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8InterfaceIndexOrZeroread-onlycurrent
snStackingOperUnitTable
OBJECT-TYPE
Stacking operation unit table.
1.3.6.1.4.1.1991.1.1.3.31.2.2not-accessiblecurrent
snStackingOperUnitEntry
OBJECT-TYPE
An entry in the stacking operation table.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1not-accessiblecurrent
snStackingOperUnitIndex
OBJECT-TYPE
The stacking unit Id
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.1Integer32not-accessiblecurrent
snStackingOperUnitRole
OBJECT-TYPE
A role for each unit
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.2INTEGER {other(1), active(2), standby(3), member(4), standalone(5)}read-onlycurrent
snStackingOperUnitMac
OBJECT-TYPE
A MAC address for each unit
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.3MacAddressread-onlycurrent
snStackingOperUnitPriority
OBJECT-TYPE
The priority in Active/backup eclection.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.4Integer32 (0..255)read-onlycurrent
snStackingOperUnitState
OBJECT-TYPE
A state for each unit
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.5INTEGER {local(1), remote(2), reserved(3), empty(4)}read-onlycurrent
snStackingOperUnitDescription
OBJECT-TYPE
Describes the stacking state for each unit.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.6DisplayString (SIZE(0..128))read-onlycurrent
snStackingOperUnitStackPort1
OBJECT-TYPE
First stack port for each unit. It returns 0 if stack port does not exist.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.7InterfaceIndexOrZeroread-onlycurrent
snStackingOperUnitStackPort1State
OBJECT-TYPE
The first stack port state for each unit.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.8INTEGER {other(1), up(2), down(3)}read-onlycurrent
snStackingOperUnitStackPort2
OBJECT-TYPE
Second stack port for each unit. It returns 0 if stack port does not exist.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.9InterfaceIndexOrZeroread-onlycurrent
snStackingOperUnitStackPort2State
OBJECT-TYPE
The second stack port state for each unit.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.10INTEGER {other(1), up(2), down(3)}read-onlycurrent
snStackingOperUnitNeighbor1
OBJECT-TYPE
Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11Integer32read-onlycurrent
snStackingOperUnitNeighbor2
OBJECT-TYPE
Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0.
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12Integer32read-onlycurrent
snStackingOperUnitImgVer
OBJECT-TYPE
The version of the running software image
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.13DisplayString (SIZE(0..32))read-onlycurrent
snStackingOperUnitBuildlVer
OBJECT-TYPE
The version of the running software build
1.3.6.1.4.1.1991.1.1.3.31.2.2.1.14DisplayString (SIZE(0..32))read-onlycurrent