EXTREME-VLAN-MIB
- Registered at
- 1.3.6.1.4.1.1916.1.2
- Last updated
- 1900-07-24 00:00
- Organization
- Extreme Networks, Inc.
- Namespace
- extreme
- Source file
EXTREME-BASE-MIB- Digest
sha256:920ec3f1c764d83d84c3c0ad6a4d3ca2aa2e105baf75bb47bf910c2a7454dbfc
Description
Extreme Virtual LAN objects
Contact
www.extremenetworks.com
Imports
| From | Symbols |
|---|---|
| EXTREME-BASE-MIB | PortList, extremeAgent |
| EXTREME-SYSTEM-MIB | extremeSlotNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter64, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
6 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EXTREME-BASE-MIB EXTREME-SYSTEM-MIB EXTREME-VLAN-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ExtremeVlanEncapsType type | ||||
| ExtremeVlanType type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| extremeVlanGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.1 | |||
| extremeVlanGlobalMappingTable OBJECT-TYPE This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a global identifier. | 1.3.6.1.4.1.1916.1.2.1.1 | not-accessible | deprecated | |
| extremeVlanGlobalMappingEntry OBJECT-TYPE An individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTable to a non-zero value. | 1.3.6.1.4.1.1916.1.2.1.1.1 | not-accessible | current | |
| extremeVlanGlobalMappingIdentifier OBJECT-TYPE An index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. | 1.3.6.1.4.1.1916.1.2.1.1.1.1 | INTEGER (0..65535) | read-only | current |
| extremeVlanGlobalMappingIfIndex OBJECT-TYPE The value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry. | 1.3.6.1.4.1.1916.1.2.1.1.1.2 | INTEGER | read-only | current |
| extremeVlanIfTable OBJECT-TYPE This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be created, destroyed and/or mapped to a globally identified vlan. | 1.3.6.1.4.1.1916.1.2.1.2 | not-accessible | current | |
| extremeVlanIfEntry OBJECT-TYPE An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object. | 1.3.6.1.4.1.1916.1.2.1.2.1 | not-accessible | current | |
| extremeVlanIfIndex OBJECT-TYPE The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object. | 1.3.6.1.4.1.1916.1.2.1.2.1.1 | INTEGER | read-create | current |
| extremeVlanIfDescr OBJECT-TYPE This is a description of the VLAN interface. | 1.3.6.1.4.1.1916.1.2.1.2.1.2 | DisplayString (SIZE(0..32)) | read-create | current |
| extremeVlanIfType OBJECT-TYPE The VLAN interface type. | 1.3.6.1.4.1.1916.1.2.1.2.1.3 | ExtremeVlanType | read-create | current |
| extremeVlanIfGlobalIdentifier OBJECT-TYPE An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. The binding between a global identifier and a VLAN interface can be created or removed. To create a binding an NMS must write a non-zero value to this object. To delete a binding, the NMS must write a zero to this object. The value 1 is reserved for the default VLAN and this cannot be deleted or re-assigned. | 1.3.6.1.4.1.1916.1.2.1.2.1.4 | INTEGER (0..65535) | read-create | deprecated |
| extremeVlanIfStatus OBJECT-TYPE The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3). Setting this object to active(1) is only valid when the current status is active(1) or notInService(2). When the state of the row transitions is set to active(1), the agent creates the corresponding row in the ifTable. Setting this object to destroy(6) will remove the corresponding VLAN interface, remove the entry in this table, and the corresponding entries in the extremeVlanGlobalMappingTable and the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable and any protocol specific tables dependencies. | 1.3.6.1.4.1.1916.1.2.1.2.1.6 | RowStatus | read-create | current |
| extremeVlanIfIgnoreStpFlag OBJECT-TYPE Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, the Default value is FALSE, which means that the VLAN uses STP port information | 1.3.6.1.4.1.1916.1.2.1.2.1.7 | TruthValue | read-write | current |
| extremeVlanIfIgnoreBpduFlag OBJECT-TYPE Setting this object to true causes this VLAN's BPDU's to be ignored by the Spanning Tree process. This can be used to keep the root bridge within one's own network when external switches also fall within the same Spanning Tree Domain. When a vlan is first created, the Default value is FALSE. | 1.3.6.1.4.1.1916.1.2.1.2.1.8 | TruthValue | read-write | current |
| extremeVlanIfLoopbackModeFlag OBJECT-TYPE Setting this object to true causes loopback mode to be enabled on this VLAN. | 1.3.6.1.4.1.1916.1.2.1.2.1.9 | TruthValue | read-write | current |
| extremeVlanIfVlanId OBJECT-TYPE The VLAN ID of this VLAN. | 1.3.6.1.4.1.1916.1.2.1.2.1.10 | INTEGER | read-only | current |
| extremeVirtualGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.2 | |||
| extremeNextAvailableVirtIfIndex OBJECT-TYPE The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The current value of this object is changed to a new value when the current value is written to an agent's table, that is indexed by ifIndex. Row creation using the current value of this object, allocates a virtual ifIndex. Note the following: 1. A newly created row does not have to be active(1) for the agent to allocate the virtual ifIndex. 2. Race conditions between multiple NMS's end when a row is created. Rows are deemed created when a setRequest is successfully committed (i.e. the errorStats is noError(0)). 3. An agent that exhausts its supply of virual ifIndex values returns zero as the value of this object. This can be used by an NMS as an indication to deleted unused rows and reboot the device. | 1.3.6.1.4.1.1916.1.2.2.1 | INTEGER | read-only | current |
| extremeEncapsulationGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.3 | |||
| extremeVlanEncapsIfTable OBJECT-TYPE This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the system. A VLAN encapsulation interface may be created or destroyed. | 1.3.6.1.4.1.1916.1.2.3.1 | not-accessible | current | |
| extremeVlanEncapsIfEntry OBJECT-TYPE An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object. | 1.3.6.1.4.1.1916.1.2.3.1.1 | not-accessible | current | |
| extremeVlanEncapsIfIndex OBJECT-TYPE The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the extremeNextAvailableVirtIfIndex object. | 1.3.6.1.4.1.1916.1.2.3.1.1.1 | INTEGER | read-create | current |
| extremeVlanEncapsIfType OBJECT-TYPE The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. | 1.3.6.1.4.1.1916.1.2.3.1.1.2 | ExtremeVlanEncapsType | read-create | current |
| extremeVlanEncapsIfTag OBJECT-TYPE The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. | 1.3.6.1.4.1.1916.1.2.3.1.1.3 | INTEGER | read-create | current |
| extremeVlanEncapsIfStatus OBJECT-TYPE The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notReady(3). In order for a row to become active, the NMS must set extremeVlanEncapsIfTagType and extremeVlanEncapsIfTag to some valid and consistent values. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row, the agent will create the row and change the status to active(1). If any of the necessary objects are not available, or specify an invalid configuration, the row will not be created and the agent will return an appropriate error. Setting this object to createAndWait(5) causes a row in in this table to be created. If all necessary objects in the row have been assigned values and specify a valid configuration, the status of the row will be set to notInService(2); otherwise, the status will be set to notReady(3). This object may only be set to createAndGo(4) or createAndWait(5) if it does not exist. Setting this object to active(1) when the status is notInService(2) causes the agent to commit the row. Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to destroy(6) will remove the corresponding VLAN encapsulation interface, remove the entry in this table, and remove the corresponding entry in the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any references to this interface in the ifStackTable. | 1.3.6.1.4.1.1916.1.2.3.1.1.4 | RowStatus | read-create | current |
| extremeVlanIpGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.4 | |||
| extremeVlanIpTable OBJECT-TYPE A list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index. | 1.3.6.1.4.1.1916.1.2.4.1 | not-accessible | current | |
| extremeVlanIpEntry OBJECT-TYPE A extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface. | 1.3.6.1.4.1.1916.1.2.4.1.1 | not-accessible | current | |
| extremeVlanIpNetAddress OBJECT-TYPE The IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index. | 1.3.6.1.4.1.1916.1.2.4.1.1.1 | IpAddress | read-create | current |
| extremeVlanIpNetMask OBJECT-TYPE The IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress. | 1.3.6.1.4.1.1916.1.2.4.1.1.2 | IpAddress | read-create | current |
| extremeVlanIpStatus OBJECT-TYPE The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to active(1) or createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the row creation request. Setting this object to createAndWait(5) is not supported. When the status changes to active(1), the agent applies the IP parmeters to the IP VLAN interface identified by the corresponding value of the extremeVlanIpIndex object. Setting this object to destroy(6) will remove the IP parmeters from the IP VLAN interface and remove the entry from this table. | 1.3.6.1.4.1.1916.1.2.4.1.1.3 | RowStatus | read-create | current |
| extremeVlanIpForwardingState OBJECT-TYPE Indicates whether the IP Forwarding on this Vlan is Enable or not. A true value indicates that the Vlan is Enable. | 1.3.6.1.4.1.1916.1.2.4.1.1.4 | TruthValue | read-create | current |
| extremeProtocolGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.5 | |||
| extremeVlanProtocolTable OBJECT-TYPE Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProtocolIndex. A given protocol ID may appear in the definition of just one protocol definition. This table will typically contain some default entries for popular protocols chosen by ExtremeWare. | 1.3.6.1.4.1.1916.1.2.5.1 | not-accessible | current | |
| extremeVlanProtocolEntry OBJECT-TYPE One member protocol ID of a protocol definition. | 1.3.6.1.4.1.1916.1.2.5.1.1 | not-accessible | current | |
| extremeVlanProtocolIndex OBJECT-TYPE An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare). | 1.3.6.1.4.1.1916.1.2.5.1.1.1 | INTEGER (0..7) | read-create | current |
| extremeVlanProtocolIdIndex OBJECT-TYPE An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to 6 in ExtremeWare). | 1.3.6.1.4.1.1916.1.2.5.1.1.2 | INTEGER (0..6) | read-create | current |
| extremeVlanProtocolName OBJECT-TYPE A human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProtocolEntry with extremeVlanProtocolName of ANY represents a match on all protocols: this entry may not be modified. | 1.3.6.1.4.1.1916.1.2.5.1.1.3 | DisplayString (SIZE(0..31)) | read-create | current |
| extremeVlanProtocolDllEncapsType OBJECT-TYPE Represents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager. | 1.3.6.1.4.1.1916.1.2.5.1.1.4 | INTEGER {any(1), ethertype(2), llc(3), llcSnapEthertype(4), none(5)} | read-create | current |
| extremeVlanProtocolId OBJECT-TYPE The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDllEncapsType values of any(1) or none(5). | 1.3.6.1.4.1.1916.1.2.5.1.1.5 | INTEGER (0..65535) | read-create | current |
| extremeVlanProtocolStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.1916.1.2.5.1.1.6 | RowStatus | read-create | current |
| extremeVlanProtocolVlanTable OBJECT-TYPE Table to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare). | 1.3.6.1.4.1.1916.1.2.5.2 | not-accessible | current | |
| extremeVlanProtocolVlanEntry OBJECT-TYPE A mapping of untagged packets of one protocol onto a particular VLAN. | 1.3.6.1.4.1.1916.1.2.5.2.1 | not-accessible | current | |
| extremeVlanProtocolVlanIfIndex OBJECT-TYPE The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object. | 1.3.6.1.4.1.1916.1.2.5.2.1.1 | INTEGER | read-create | current |
| extremeVlanProtocolVlanProtocolIndex OBJECT-TYPE An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare). | 1.3.6.1.4.1.1916.1.2.5.2.1.2 | INTEGER | read-create | current |
| extremeVlanProtocolVlanStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.1916.1.2.5.2.1.3 | RowStatus | read-create | current |
| extremeVlanOpaqueGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.6 | |||
| extremeVlanOpaqueTable OBJECT-TYPE This table lists the ports associated with each VLAN interface. | 1.3.6.1.4.1.1916.1.2.6.1 | not-accessible | current | |
| extremeVlanOpaqueEntry OBJECT-TYPE This represents the tagged and untagged ports on each slot per vlan. | 1.3.6.1.4.1.1916.1.2.6.1.1 | not-accessible | current | |
| extremeVlanOpaqueTaggedPorts OBJECT-TYPE Each bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise. | 1.3.6.1.4.1.1916.1.2.6.1.1.1 | PortList | read-only | current |
| extremeVlanOpaqueUntaggedPorts OBJECT-TYPE Each bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise. | 1.3.6.1.4.1.1916.1.2.6.1.1.2 | PortList | read-only | current |
| extremeVlanStackGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.7 | |||
| extremeVlanStackTable OBJECT-TYPE Represents those components of the ifStackTable that do not contain a Physical interface. | 1.3.6.1.4.1.1916.1.2.7.1 | not-accessible | current | |
| extremeVlanStackEntry OBJECT-TYPE Each entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physical interfaces in the ifStackTable are not represented here. | 1.3.6.1.4.1.1916.1.2.7.1.1 | not-accessible | current | |
| extremeVlanStackHigherLayer OBJECT-TYPE The higher layer in the logical vlan hierarchy. | 1.3.6.1.4.1.1916.1.2.7.1.1.1 | INTEGER | read-only | current |
| extremeVlanStackLowerLayer OBJECT-TYPE The lower layer in the logical vlan hierarchy. | 1.3.6.1.4.1.1916.1.2.7.1.1.2 | INTEGER | read-only | current |
| extremeVlanStatsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.8 | |||
| extremeVlanL2StatsTable OBJECT-TYPE This tables contains per-VLAN layer 2 statistics information. | 1.3.6.1.4.1.1916.1.2.8.1 | not-accessible | current | |
| extremeVlanL2StatsEntry OBJECT-TYPE | 1.3.6.1.4.1.1916.1.2.8.1.1 | not-accessible | current | |
| extremeVlanL2StatsIfDescr OBJECT-TYPE This is a description(name) of the VLAN. | 1.3.6.1.4.1.1916.1.2.8.1.1.1 | DisplayString (SIZE(0..32)) | read-only | current |
| extremeVlanL2StatsPktsToCpu OBJECT-TYPE The total number of packets of this VLAN sent to the CPU. | 1.3.6.1.4.1.1916.1.2.8.1.1.2 | Counter64 | read-only | current |
| extremeVlanL2StatsPktsLearnt OBJECT-TYPE The total number of packets learnt on this VLAN. | 1.3.6.1.4.1.1916.1.2.8.1.1.3 | Counter64 | read-only | current |
| extremeVlanL2StatsIgmpCtrlPktsSnooped OBJECT-TYPE The total number of IGMP control packets snooped on this VLAN. | 1.3.6.1.4.1.1916.1.2.8.1.1.4 | Counter64 | read-only | current |
| extremeVlanL2StatsIgmpDataPktsSwitched OBJECT-TYPE The total number of IGMP data packets switched on this VLAN. | 1.3.6.1.4.1.1916.1.2.8.1.1.5 | Counter64 | read-only | current |
| extremeVlanAggregationGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.9 | |||
| extremeVlanAggregationTable OBJECT-TYPE This table contains the VLAN aggregation information. | 1.3.6.1.4.1.1916.1.2.9.1 | not-accessible | current | |
| extremeVlanAggregationEntry OBJECT-TYPE Information about the individual VLAN aggregation entry. | 1.3.6.1.4.1.1916.1.2.9.1.1 | not-accessible | current | |
| extremeVlanAggregationSuperVlanIfIndex OBJECT-TYPE The Super Vlan index for this entry. | 1.3.6.1.4.1.1916.1.2.9.1.1.1 | INTEGER | read-only | current |
| extremeVlanAggregationSubVlanIfIndex OBJECT-TYPE The Sub Vlan index for this entry. | 1.3.6.1.4.1.1916.1.2.9.1.1.2 | INTEGER | read-only | current |
| extremeVlanAggregationSubVlanStartIpNetAddress OBJECT-TYPE This represents the start network address of the IP range. | 1.3.6.1.4.1.1916.1.2.9.1.1.3 | IpAddress | read-create | current |
| extremeVlanAggregationSubVlanStartIpNetMask OBJECT-TYPE This represents the start network address mask of the IP range | 1.3.6.1.4.1.1916.1.2.9.1.1.4 | IpAddress | read-only | current |
| extremeVlanAggregationSubVlanEndIpNetAddress OBJECT-TYPE This represents the end network address of the IP range. | 1.3.6.1.4.1.1916.1.2.9.1.1.5 | IpAddress | read-create | current |
| extremeVlanAggregationSubVlanEndIpNetMask OBJECT-TYPE This represents the end network address mask of the IP range. | 1.3.6.1.4.1.1916.1.2.9.1.1.6 | IpAddress | read-only | current |
| extremeVlanAggregationStatus OBJECT-TYPE The status of this entry. | 1.3.6.1.4.1.1916.1.2.9.1.1.7 | RowStatus | read-create | current |
| extremeVlanAggregationConfigTable OBJECT-TYPE This table contains the sub VLAN proxy setting information. | 1.3.6.1.4.1.1916.1.2.9.2 | not-accessible | current | |
| extremeVlanAggregationConfigEntry OBJECT-TYPE Information about the individual VLAN aggregation entry. | 1.3.6.1.4.1.1916.1.2.9.2.1 | not-accessible | current | |
| extremeVlanAggregationConfigSuperVlanIfIndex OBJECT-TYPE The Super Vlan index for this entry. | 1.3.6.1.4.1.1916.1.2.9.2.1.1 | INTEGER | read-only | current |
| extremeVlanAggregationConfigSubVlanProxyEnable OBJECT-TYPE The boolean flag that prevents normal communication between sub vlans. | 1.3.6.1.4.1.1916.1.2.9.2.1.2 | TruthValue | read-create | current |
| extremeVlanTranslationGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.2.10 | |||
| extremeVlanTranslationTable OBJECT-TYPE This table contains the VLAN translation information. | 1.3.6.1.4.1.1916.1.2.10.1 | not-accessible | current | |
| extremeVlanTranslationEntry OBJECT-TYPE Information about the individual VLAN translation entry. | 1.3.6.1.4.1.1916.1.2.10.1.1 | not-accessible | current | |
| extremeVlanTranslationSuperVlanIfIndex OBJECT-TYPE The Super Vlan index for this entry. | 1.3.6.1.4.1.1916.1.2.10.1.1.1 | INTEGER | read-only | current |
| extremeVlanTranslationMemberVlanIfIndex OBJECT-TYPE The member Vlan index for this entry. | 1.3.6.1.4.1.1916.1.2.10.1.1.2 | INTEGER | read-only | current |
| extremeVlanTranslationStatus OBJECT-TYPE The status of this entry. | 1.3.6.1.4.1.1916.1.2.10.1.1.3 | RowStatus | read-create | current |