EXTREME-SYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.1916.1.1
- Last updated
- 1900-07-24 00:00
- Organization
- Extreme Networks, Inc.
- Namespace
- extreme
- Source file
EXTREME-BASE-MIB- Digest
sha256:920ec3f1c764d83d84c3c0ad6a4d3ca2aa2e105baf75bb47bf910c2a7454dbfc
Description
Extreme System objects: objects common to all platforms
Contact
www.extremenetworks.com
Imports
| From | Symbols |
|---|---|
| EXTREME-BASE-MIB | PortList, extremeAgent |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
5 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EXTREME-BASE-MIB EXTREME-SYSTEM-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| extremeSystemCommon OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.1.1 | |||
| extremeSaveConfiguration OBJECT-TYPE When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the extremeSaveStatus object to determine when the asynchronous save operation has completed. | 1.3.6.1.4.1.1916.1.1.1.3 | INTEGER {saveToPrimary(1), saveToSecondary(2)} | read-write | current |
| extremeSaveStatus OBJECT-TYPE This object will return the status of a save operation invoked by setting the extremeSaveConfiguration object. A network management application can read this object to determine that a save operation has completed. | 1.3.6.1.4.1.1916.1.1.1.4 | INTEGER {saveInProgress(1), saveNotInProgress(2)} | read-only | current |
| extremeCurrentConfigInUse OBJECT-TYPE Shows which NVRAM configuration store was used at last boot | 1.3.6.1.4.1.1916.1.1.1.5 | INTEGER {primary(1), secondary(2)} | read-only | current |
| extremeConfigToUseOnReboot OBJECT-TYPE Controls which NVRAM configuration store will be used on next reboot. | 1.3.6.1.4.1.1916.1.1.1.6 | INTEGER {primary(1), secondary(2)} | read-write | current |
| extremeOverTemperatureAlarm OBJECT-TYPE Alarm status of overtemperature sensor in device enclosure. | 1.3.6.1.4.1.1916.1.1.1.7 | TruthValue | read-only | current |
| extremeCurrentTemperature OBJECT-TYPE Current temperature in degrees celcius measured inside device enclosure. | 1.3.6.1.4.1.1916.1.1.1.8 | INTEGER (0..100) | read-only | current |
| extremeFanStatusTable OBJECT-TYPE Table of operational status of all internal cooling fans. | 1.3.6.1.4.1.1916.1.1.1.9 | not-accessible | current | |
| extremeFanStatusEntry OBJECT-TYPE Entry in table of all internal cooling fans. | 1.3.6.1.4.1.1916.1.1.1.9.1 | not-accessible | current | |
| extremeFanNumber OBJECT-TYPE Identifier of cooling fan, numbered from the front and/or left side of device. | 1.3.6.1.4.1.1916.1.1.1.9.1.1 | INTEGER | read-only | current |
| extremeFanOperational OBJECT-TYPE Operational status of a cooling fan. | 1.3.6.1.4.1.1916.1.1.1.9.1.2 | TruthValue | read-only | current |
| extremeFanEntPhysicalIndex OBJECT-TYPE The entity index for this fan entity in the entity table. | 1.3.6.1.4.1.1916.1.1.1.9.1.3 | INTEGER | read-only | current |
| extremePrimaryPowerOperational OBJECT-TYPE Operational status of internal power supply of a device. | 1.3.6.1.4.1.1916.1.1.1.10 | TruthValue | read-only | current |
| extremeRedundantPowerStatus OBJECT-TYPE Operational status of an external redundant power supply to a device. | 1.3.6.1.4.1.1916.1.1.1.11 | INTEGER {notPresent(1), presentOK(2), presentNotOK(3)} | read-only | current |
| extremeRedundantPowerAlarm OBJECT-TYPE Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition. | 1.3.6.1.4.1.1916.1.1.1.12 | TruthValue | read-only | current |
| extremePrimarySoftwareRev OBJECT-TYPE The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device. | 1.3.6.1.4.1.1916.1.1.1.13 | DisplayString (SIZE(0..15)) | read-only | current |
| extremeSecondarySoftwareRev OBJECT-TYPE The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device. | 1.3.6.1.4.1.1916.1.1.1.14 | DisplayString (SIZE(0..15)) | read-only | current |
| extremeImageToUseOnReboot OBJECT-TYPE Controls which image will be used on next reboot. | 1.3.6.1.4.1.1916.1.1.1.15 | INTEGER {primary(1), secondary(2)} | read-write | current |
| extremeSystemID OBJECT-TYPE This represents the System ID of the Summit Switch. | 1.3.6.1.4.1.1916.1.1.1.16 | DisplayString (SIZE(0..126)) | read-only | current |
| extremeSystemBoardID OBJECT-TYPE This represents the Board ID of the Summit Switch. | 1.3.6.1.4.1.1916.1.1.1.17 | DisplayString (SIZE(0..126)) | read-only | current |
| extremeSystemLeftBoardID OBJECT-TYPE This represents the Left Board ID of the Summit Switch. | 1.3.6.1.4.1.1916.1.1.1.18 | DisplayString (SIZE(0..126)) | read-only | current |
| extremeSystemRightBoardID OBJECT-TYPE This represents the Right Board ID of the Summit Switch. | 1.3.6.1.4.1.1916.1.1.1.19 | DisplayString (SIZE(0..126)) | read-only | current |
| extremeInputPowerVoltage OBJECT-TYPE The input power voltage at which the system is currently operating. | 1.3.6.1.4.1.1916.1.1.1.20 | INTEGER {v110(1), v220(2), v48DC(3)} | read-only | current |
| extremePowerStatus OBJECT-TYPE Operational status of the power supply to a device. | 1.3.6.1.4.1.1916.1.1.1.21 | INTEGER {notPresent(1), presentOK(2), presentNotOK(3)} | read-only | current |
| extremePowerAlarm OBJECT-TYPE Alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition. | 1.3.6.1.4.1.1916.1.1.1.22 | TruthValue | read-only | current |
| extremeRmonEnable OBJECT-TYPE Setting this to true will cause the agent to start collecting RMON statistics. | 1.3.6.1.4.1.1916.1.1.1.23 | TruthValue | read-write | current |
| extremeBootROMVersion OBJECT-TYPE The software revision of the bootrom on the device. This string will have a zero length if the revision is unknown or invalid. | 1.3.6.1.4.1.1916.1.1.1.25 | DisplayString (SIZE(0..15)) | read-only | current |
| extremeDot1dTpFdbTableEnable OBJECT-TYPE Setting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are always allowed. | 1.3.6.1.4.1.1916.1.1.1.26 | TruthValue | read-write | current |
| extremePowerSupplyTable OBJECT-TYPE Table of status of all power supplies in the system. | 1.3.6.1.4.1.1916.1.1.1.27 | not-accessible | current | |
| extremePowerSupplyEntry OBJECT-TYPE An entry indicating the status of a specific power supply. | 1.3.6.1.4.1.1916.1.1.1.27.1 | not-accessible | current | |
| extremePowerSupplyNumber OBJECT-TYPE Power supply number. | 1.3.6.1.4.1.1916.1.1.1.27.1.1 | INTEGER | accessible-for-notify | current |
| extremePowerSupplyStatus OBJECT-TYPE Status of the power supply. | 1.3.6.1.4.1.1916.1.1.1.27.1.2 | INTEGER {notPresent(1), presentOK(2), presentNotOK(3)} | read-only | current |
| extremePowerSupplyInputVoltage OBJECT-TYPE Input voltage of the power supply | 1.3.6.1.4.1.1916.1.1.1.27.1.3 | INTEGER {v110(1), v220(2), v48DC(3), unknown(4)} | read-only | current |
| extremePowerSupplySerialNumber OBJECT-TYPE The serial number of the power supply unit. | 1.3.6.1.4.1.1916.1.1.1.27.1.4 | DisplayString (SIZE(0..126)) | read-only | current |
| extremePowerSupplyEntPhysicalIndex OBJECT-TYPE The entity index for this psu entity in the entity table. | 1.3.6.1.4.1.1916.1.1.1.27.1.5 | INTEGER | read-only | current |
| extremeCpuAggregateUtilization OBJECT-TYPE The aggregate CPU utilization since the time the start started executing. | 1.3.6.1.4.1.1916.1.1.1.28 | INTEGER | read-only | current |
| extremeCpuTask2Table OBJECT-TYPE Table of CPU tasks that are active. | 1.3.6.1.4.1.1916.1.1.1.29 | not-accessible | current | |
| extremeCpuTask2Entry OBJECT-TYPE An entry in table of describes a single task. | 1.3.6.1.4.1.1916.1.1.1.29.1 | not-accessible | current | |
| extremeCpuTask2CpuId OBJECT-TYPE CPU on which this task last executed or is executing. The primary CPU has a value of 1. | 1.3.6.1.4.1.1916.1.1.1.29.1.1 | Unsigned32 | not-accessible | current |
| extremeCpuTask2Name OBJECT-TYPE Name associated with the reported task id. | 1.3.6.1.4.1.1916.1.1.1.29.1.2 | DisplayString (SIZE(0..31)) | not-accessible | current |
| extremeCpuTask2Id OBJECT-TYPE Task identifier assigned by the operating system when this task is spawned. | 1.3.6.1.4.1.1916.1.1.1.29.1.3 | Unsigned32 | read-only | current |
| extremeCpuTask2Pc OBJECT-TYPE The value of the program counter for this task. It indicates the address of the next instruction that would be executed once the operating system resumes this task. | 1.3.6.1.4.1.1916.1.1.1.29.1.4 | Unsigned32 | read-only | current |
| extremeCpuTask2Status OBJECT-TYPE The current status of the task as reported by the operating system. | 1.3.6.1.4.1.1916.1.1.1.29.1.5 | DisplayString | read-only | current |
| extremeCpuTask2Utilization OBJECT-TYPE The current CPU utilization by this task. This is the utilization when the task last executed. | 1.3.6.1.4.1.1916.1.1.1.29.1.6 | Unsigned32 | read-only | current |
| extremeCpuTask2MaxUtilization OBJECT-TYPE The maximum CPU utilization by this task since the time the start started executing. This value may be cleared. | 1.3.6.1.4.1.1916.1.1.1.29.1.7 | Unsigned32 | read-write | current |
| extremeAuthFailSrcAddr OBJECT-TYPE The IP address of the originator of the bad SNMP request that caused the generation of an authentication failure trap. | 1.3.6.1.4.1.1916.1.1.1.30 | IpAddress | accessible-for-notify | current |
| extremeCpuTransmitPriority OBJECT-TYPE The CPU transmit priority. | 1.3.6.1.4.1.1916.1.1.1.31 | INTEGER {normal(1), high(2)} | read-write | deprecated |
| extremeImageBooted OBJECT-TYPE The image with which the switch was last booted, using which it is currently running. | 1.3.6.1.4.1.1916.1.1.1.32 | INTEGER {primary(1), secondary(2)} | read-only | current |
| extremeMsmFailoverCause OBJECT-TYPE The cause of the last MSM failover. never(1) means an MSM Failover has not occurred since the last reboot. admin(2) means the failover was initiated by the user. exception(3) means the former master MSM encountered a software exception condition. removal(4) means the master MSM was physically removed from the chassis. hwFailure(5) means a diagnostic failure was detected in the master MSM. watchdog(6) means that the master MSM hardware watchdog timer expired. keepalive(7) means the master MSM failed to respond to slave keepalive requests. The MSM failover will have been hitless only in the admin(2) and exception(3) cases | 1.3.6.1.4.1.1916.1.1.1.33 | INTEGER {never(1), admin(2), exception(3), removal(4), hwFailure(5), watchdog(6), keepalive(7)} | read-only | current |
| extremeImageTable OBJECT-TYPE A table containing information about each software image. | 1.3.6.1.4.1.1916.1.1.1.34 | not-accessible | current | |
| extremeImageEntry OBJECT-TYPE A table entry containing information about each software image. | 1.3.6.1.4.1.1916.1.1.1.34.1 | not-accessible | current | |
| extremeImageNumber OBJECT-TYPE A unique integer identifying the particular software image. | 1.3.6.1.4.1.1916.1.1.1.34.1.1 | INTEGER {cur(0), pri(1), sec(2)} | read-only | current |
| extremeMajorVersion OBJECT-TYPE The ExtremeWare Release Major Version. | 1.3.6.1.4.1.1916.1.1.1.34.1.2 | INTEGER | read-only | current |
| extremeSubMajorVersion OBJECT-TYPE The ExtremeWare Release Sub-major Version. This object is deprecated from extremeware 7.3. The extremeMinorVersion gets the value of extremeSubMajorVersion and the new extremePatchVersion gets the value of old extremeMinorVersion value. | 1.3.6.1.4.1.1916.1.1.1.34.1.3 | INTEGER | read-only | deprecated |
| extremeMinorVersion OBJECT-TYPE The ExtremeWare Release Minor Version. | 1.3.6.1.4.1.1916.1.1.1.34.1.4 | INTEGER | read-only | current |
| extremeBuildNumber OBJECT-TYPE The ExtremeWare Build Number. | 1.3.6.1.4.1.1916.1.1.1.34.1.5 | INTEGER | read-only | current |
| extremeTechnologyReleaseNumber OBJECT-TYPE The Technology Release version. This value is zero for all but TR releases. | 1.3.6.1.4.1.1916.1.1.1.34.1.6 | INTEGER | read-only | current |
| extremeSustainingReleaseNumber OBJECT-TYPE The Sustaining Release number for the ExtremeWare version. | 1.3.6.1.4.1.1916.1.1.1.34.1.7 | INTEGER | read-only | current |
| extremeBranchRevisionNumber OBJECT-TYPE The incremental build on specified branch. | 1.3.6.1.4.1.1916.1.1.1.34.1.8 | INTEGER | read-only | current |
| extremeImageType OBJECT-TYPE The branch type from which the image was built. | 1.3.6.1.4.1.1916.1.1.1.34.1.9 | INTEGER {trunk(0), branch(1), patch(2), technology(3), beta(4)} | read-only | current |
| extremeImageDescription OBJECT-TYPE A unique string that can be used to identify the specific patch, technology, or development branch release. | 1.3.6.1.4.1.1916.1.1.1.34.1.10 | DisplayString (SIZE(0..13)) | read-only | current |
| extremeImageSecurity OBJECT-TYPE Indicates whether image was built with ssh.This object is deprecated, the ssh capability can be obtained from the extremeImageSshCapability of the ImageFeatureTable | 1.3.6.1.4.1.1916.1.1.1.34.1.11 | INTEGER {unknown(0), nossh(1), ssh(2)} | read-only | deprecated |
| extremePatchVersion OBJECT-TYPE The ExtremeWare Release Patch Version. | 1.3.6.1.4.1.1916.1.1.1.34.1.12 | INTEGER | read-only | current |
| extremeImageFeatureTable OBJECT-TYPE A table containing information about the software features. | 1.3.6.1.4.1.1916.1.1.1.35 | not-accessible | current | |
| extremeImageFeatureEntry OBJECT-TYPE A table entry containing information about software features. | 1.3.6.1.4.1.1916.1.1.1.35.1 | not-accessible | current | |
| extremeImageFeatureNumber OBJECT-TYPE A unique integer identifying the particular software image. | 1.3.6.1.4.1.1916.1.1.1.35.1.1 | INTEGER {cur(0), pri(1), sec(2)} | read-only | current |
| extremeImageSshCapability OBJECT-TYPE Indicates whether image has ssh capability. | 1.3.6.1.4.1.1916.1.1.1.35.1.2 | INTEGER {unknown(0), nossh(1), ssh(2)} | read-only | current |
| extremeImageUAACapability OBJECT-TYPE Indicates whether image has Wireless(UAA) components. | 1.3.6.1.4.1.1916.1.1.1.35.1.3 | INTEGER {unknown(0), nouaa(1), uaa(2)} | read-only | current |
| extremeChassisGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.1.2 | |||
| extremeMasterMSMSlot OBJECT-TYPE The extremeSlotNumber of the master MSM module. | 1.3.6.1.4.1.1916.1.1.2.1 | INTEGER | read-only | current |
| extremeSlotTable OBJECT-TYPE A table containing information about each slot in the chassis. | 1.3.6.1.4.1.1916.1.1.2.2 | not-accessible | current | |
| extremeSlotEntry OBJECT-TYPE A table entry containing information about the module in each slot of the chassis. | 1.3.6.1.4.1.1916.1.1.2.2.1 | not-accessible | current | |
| extremeSlotNumber OBJECT-TYPE A unique integer identifying the particular slot in the chassis. | 1.3.6.1.4.1.1916.1.1.2.2.1.1 | INTEGER | read-only | current |
| extremeSlotName OBJECT-TYPE A name identifying the particular slot in the chassis. | 1.3.6.1.4.1.1916.1.1.2.2.1.2 | DisplayString | read-only | current |
| extremeSlotModuleConfiguredType OBJECT-TYPE The configured module type for the given slot. At startup, the module-type is none(1). It is possible to configure the module-type even if there is no module in the slot. If the current module in the slot is different than the requested configured module-type, then the current configuration for the module is erased and the card will be restarted. The new configured module-type will be recorded. Since the configured module type is different than the actual module type, a moduleMismatch trap will be sent, and the extremeSlotModuleState for that module will show a mismatch(3). Setting this variable to none(1) will clear the previously assigned module-type of this slot, and all configuration information related to the slot will be erased. | 1.3.6.1.4.1.1916.1.1.2.2.1.3 | INTEGER {none(1), fe32(2), g4x(3), g6x(4), fe32fx(5), f48ti(7), g8xi(8), g8ti(9), g12sxi(10), g12ti(11), fm32t(21), gm4x(22), gm4sx(23), gm4t(24), wdm8(25), fm24f(26), fm24sf(27), fm24te(28), f96ti(29), wdm4(30), f32fi(31), tenGx3(32), tenGigLR(33), g16x3(34), g24t3(35), gm16x3(36), gm16t3(37), fm16t3(38), fm32p(39), fm8v(50), wm4t1(51), wm4t3(52), wm1t3(53), wm4e1(54), p3c(101), p12c(102), arm(103), mpls(104), sma(105), p48c(106), a3c(107), a12c(108), pxm(200), s300fixed(201)} | read-write | current |
| extremeSlotModuleInsertedType OBJECT-TYPE The module type inserted into the slot. It is possible to have a slot inserted into the slot even though extremeSlotConfiguredType is none(1). | 1.3.6.1.4.1.1916.1.1.2.2.1.4 | INTEGER {none(1), fe32(2), g4x(3), g6x(4), fe32fx(5), msm(6), f48ti(7), g8xi(8), g8ti(9), g12sxi(10), g12ti(11), msm64i(18), alpine3808(19), alpine3804(20), fm32t(21), gm4x(22), gm4sx(23), gm4t(24), wdm8(25), fm24f(26), fm24sf(27), fm24te(28), f96ti(29), wdm4(30), f32fi(31), tenGx3(32), tenGigLR(33), g16x3(34), g24t3(35), gm16x3(36), gm16t3(37), fm16t3(38), fm32p(39), fm8v(50), wm4t1(51), wm4t3(52), wm1t3(53), wm4e1(54), alpine3802(55), p3c(101), p12c(102), arm(103), mpls(104), sma(105), p48c(106), a3c(107), a12c(108), pxm(200), s300fixed(201), msm3(202)} | read-only | current |
| extremeSlotModuleState OBJECT-TYPE The state of the module inserted in this slot. | 1.3.6.1.4.1.1916.1.1.2.2.1.5 | INTEGER {notPresent(1), testing(2), mismatch(3), failed(4), operational(5), powerdown(6), unknown(7), present(8), poweron(9), post(10), downloading(11), booting(12), offline(13), initializing(14), invalid(100)} | read-only | current |
| extremeSlotModuleSerialNumber OBJECT-TYPE The serial number of the module inserted in this slot. | 1.3.6.1.4.1.1916.1.1.2.2.1.6 | DisplayString | read-only | current |
| extremeChassisPortsPerSlot OBJECT-TYPE The maximum number of ports that can be accomodated in a single slot. This number would change to accomodate blades with higher port density than current ones. | 1.3.6.1.4.1.1916.1.1.2.3 | INTEGER | read-only | current |
| extremeSystemHealthCheck OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.1.3 | |||
| extremeHealthCheckErrorType OBJECT-TYPE The error reported in the system health check trap | 1.3.6.1.4.1.1916.1.1.3.1 | INTEGER {unknown(1), cpuPacket(2), backplane(3), hardwareFail(4), pbusChecksum(5)} | accessible-for-notify | current |
| extremeHealthCheckAction OBJECT-TYPE The action/alarm level that has been configured for health check. | 1.3.6.1.4.1.1916.1.1.3.2 | INTEGER {syslogOnly(1), healthCheckTrap(2), ioModuleDown(3), systemDown(4), autoRecovery(5)} | read-only | current |
| extremeHealthCheckMaxRetries OBJECT-TYPE The maximum number of times a module restart will be attempted if it fails. If extremeHealthCheckAction is not autorecovery(5), then this value is zero. | 1.3.6.1.4.1.1916.1.1.3.3 | INTEGER | read-only | current |
| extremeSystemThresholds OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.1.4 | |||
| extremeCpuUtilRisingThreshold OBJECT-TYPE Rising threshold for CPU Aggregation utilization trap | 1.3.6.1.4.1.1916.1.1.4.1 | INTEGER (0..100) | read-write | current |
| extremeCpuTaskUtilPair OBJECT-TYPE TaskName/CPU_% Util pair reported in CPU Utilization trap | 1.3.6.1.4.1.1916.1.1.4.2 | DisplayString | accessible-for-notify | current |