MIBs Depot

CISCOSB-DEVICEPARAMS-MIB

Registered at
1.3.6.1.4.1.9.6.1.101.2
Last updated
2007-01-02 00:00
Organization
Cisco Systems, Inc.
Revisions
2007-01-02 00:00
Namespace
cisco
Source file
CISCOSB-DEVICEPARAMS-MIB
Digest
sha256:e98a71ade375979db33e375705e5db31efc5cb4fe9966cede5129d6323f23d17

Description

This private MIB module defines general Parameters private MIBs.

Contact

Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>

Imports

FromSymbols
CISCOSB-MIBswitch001
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue

Imported by

6 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCOSB-DEVICEPARAMS-MIB
CISCOSB-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
RlImageIdType
TEXTUAL-CONVENTION
SW images enumeration
current

Objects

NameOIDSyntaxAccessStatus
rndBridgeType
OBJECT-TYPE
Identification of the switch001 bridge type.
1.3.6.1.4.1.9.6.1.101.2.1INTEGER {reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), xtb(11), ete(12), rete(13), ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48)}read-onlycurrent
rndInactiveArpTimeOut
OBJECT-TYPE
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
1.3.6.1.4.1.9.6.1.101.2.2INTEGERread-writecurrent
rndBridgeAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.9.6.1.101.2.3
rndErrorDesc
OBJECT-TYPE
A textual description of the enterprise-specific trap sent to the Network Management Station by the switch001 managed device.
1.3.6.1.4.1.9.6.1.101.2.3.1DisplayStringread-onlycurrent
rndErrorSeverity
OBJECT-TYPE
The severity type of the enterprise-specific trap sent to the Network Management Station by the switch001 managed device.
1.3.6.1.4.1.9.6.1.101.2.3.2INTEGER {info(0), warning(1), error(2), fatal-error(3)}read-onlycurrent
rndBrgVersion
OBJECT-TYPE
The bridge version.
1.3.6.1.4.1.9.6.1.101.2.4DisplayStringread-onlycurrent
rndBrgFeatures
OBJECT-TYPE
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan bit7: PPP-Security Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server bit7: Check Connectivity bit8: WSD multiplexing Byte8 bit1: MRT3 bit2: WSD Redundancy bit3: DHCP Server bit4: WSD Connection Limit bit5: WSD Distributed System bit6: WSD Load Report bit7: WSD super farm bit8: RadWiz leased line Byte9 bit1: PPP IP address negotiaton bit2: DNS bit3: Nat bit4: WSD Static proximity bit5: WSD Dynamic proximity bit6: WSD Proxy bit7: WSD Proximity client bit8: MAC Load balancing Byte10 bit1: Unnum Inf bit2: Power Supply redundancy bit3: MRT PPP Compression bit4: ZHR Apolo bit5: Copy port bit6: UDP Relay 2.0 bit7: NVRAM bit8: URL table Byte11 bit1: URL super farm bit2: NAT on LAN bit3: Remote Con bit4: AP5000 bit5: Session tracking bit6: Mirroring bit7: Alias IP bit8: CSD Nat Byte12 bit1: content check bit2: mlb virtual ip bit3: reserved CISCOSB bit4: csd nat exception bit5: statistics monitor bit6: reserved-for-radware
1.3.6.1.4.1.9.6.1.101.2.5OCTET STRINGread-onlycurrent
rndBrgLicense
OBJECT-TYPE
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
1.3.6.1.4.1.9.6.1.101.2.6OCTET STRINGread-writecurrent
rndIpHost
OBJECT-IDENTITY
1.3.6.1.4.1.9.6.1.101.2.7
rndCommunityTable
OBJECT-TYPE
The community table of the agent
1.3.6.1.4.1.9.6.1.101.2.7.2not-accessiblecurrent
rndCommunityEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.9.6.1.101.2.7.2.1not-accessiblecurrent
rndCommunityMngStationAddr
OBJECT-TYPE
The management station that will be allowed to communicate with the agent IP address
1.3.6.1.4.1.9.6.1.101.2.7.2.1.1IpAddressread-createcurrent
rndCommunityString
OBJECT-TYPE
The community string with which the management station will communicate with the agent
1.3.6.1.4.1.9.6.1.101.2.7.2.1.2DisplayString (SIZE(1..20))read-createcurrent
rndCommunityAccess
OBJECT-TYPE
The allowed access to this management station
1.3.6.1.4.1.9.6.1.101.2.7.2.1.3INTEGER {readOnly(1), readWrite(2), super(3)}read-createcurrent
rndCommunityTrapsEnable
OBJECT-TYPE
Should the agent send traps to the management station, and what version is required
1.3.6.1.4.1.9.6.1.101.2.7.2.1.4INTEGER {snmpV1(1), snmpV2(2), snmpV3(3), trapsDisable(4)}read-createcurrent
rndCommunityStatus
OBJECT-TYPE
The status of this entry. If the status is invalid the community entry will be deleted
1.3.6.1.4.1.9.6.1.101.2.7.2.1.5INTEGER {enable(1), invalid(2)}read-createcurrent
rndCommunityPortSecurity
OBJECT-TYPE
If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device.
1.3.6.1.4.1.9.6.1.101.2.7.2.1.6INTEGER {enabled(1), disabled(2)}read-createcurrent
rndCommunityOwner
OBJECT-TYPE
The owner of this community
1.3.6.1.4.1.9.6.1.101.2.7.2.1.7DisplayString (SIZE(1..32))read-createcurrent
rndCommunityTrapDestPort
OBJECT-TYPE
The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA assigned port number for SNMP traps. This object is relevant only if rndCommunityTrapsEnable has a value different from trapsDisable.
1.3.6.1.4.1.9.6.1.101.2.7.2.1.8INTEGER (0..65535)read-createcurrent
rlMridTable
OBJECT-TYPE
The MRID related configurations table of the agent
1.3.6.1.4.1.9.6.1.101.2.7.3not-accessiblecurrent
rlMridEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.9.6.1.101.2.7.3.1not-accessiblecurrent
rlMridConnection
OBJECT-TYPE
The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry.
1.3.6.1.4.1.9.6.1.101.2.7.3.1.1INTEGERread-writecurrent
rlManagedMrid
OBJECT-TYPE
The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry
1.3.6.1.4.1.9.6.1.101.2.7.3.1.2INTEGERread-writecurrent
rndIpHostManagement
OBJECT-IDENTITY
1.3.6.1.4.1.9.6.1.101.2.7.4
rndIpHostManagementSupported
OBJECT-TYPE
ifindex manage supported.
1.3.6.1.4.1.9.6.1.101.2.7.4.1TruthValueread-onlycurrent
rndIpHostManagementIfIndex
OBJECT-TYPE
if supported manage , indicate ifindex, if 0 thaen disable
1.3.6.1.4.1.9.6.1.101.2.7.4.2INTEGERread-writecurrent
rndManagedTime
OBJECT-TYPE
The time will be sent in the format hhmmss
1.3.6.1.4.1.9.6.1.101.2.8DisplayString (SIZE(6))read-writecurrent
rndManagedDate
OBJECT-TYPE
The date will be sent in the format ddmmyy
1.3.6.1.4.1.9.6.1.101.2.9DisplayString (SIZE(6))read-writecurrent
rndBaseBootVersion
OBJECT-TYPE
Defines the boot version of the product.
1.3.6.1.4.1.9.6.1.101.2.10DisplayStringread-onlycurrent
genGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.6.1.101.2.11
genGroupHWVersion
OBJECT-TYPE
Defines the HW version of the product.
1.3.6.1.4.1.9.6.1.101.2.11.1DisplayStringread-onlycurrent
genGroupConfigurationSymbol
OBJECT-TYPE
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
1.3.6.1.4.1.9.6.1.101.2.11.2DisplayString (SIZE(1))read-onlycurrent
genGroupHWStatus
OBJECT-TYPE
This attribute describes the status of the group hardware as detected by the sensors software.
1.3.6.1.4.1.9.6.1.101.2.11.3INTEGER {ok(1), hardwareProblems(2), notSupported(255)}read-onlycurrent
rndBasePhysicalAddress
OBJECT-TYPE
The Base physical (MAC) address of the device.
1.3.6.1.4.1.9.6.1.101.2.12PhysAddressread-onlycurrent
rndSoftwareFile
OBJECT-IDENTITY
1.3.6.1.4.1.9.6.1.101.2.13
rndActiveSoftwareFileTable
OBJECT-TYPE
The (conceptual) table listing the active software file of the requested unit.
1.3.6.1.4.1.9.6.1.101.2.13.1not-accessiblecurrent
rndActiveSoftwareFileEntry
OBJECT-TYPE
An entry (conceptual row) in the rndActiveSoftwareFileTable.
1.3.6.1.4.1.9.6.1.101.2.13.1.1not-accessiblecurrent
rndUnitNumber
OBJECT-TYPE
The unit number (for stackable devices) or 1 for 'stand alone' device.
1.3.6.1.4.1.9.6.1.101.2.13.1.1.1INTEGERread-writecurrent
rndActiveSoftwareFile
OBJECT-TYPE
Indicates the current active software file, image1 or image2.
1.3.6.1.4.1.9.6.1.101.2.13.1.1.2RlImageIdTyperead-onlycurrent
rndActiveSoftwareFileAfterReset
OBJECT-TYPE
Indicates the software file that will be active after reset (image1 or image2). If an error occurred in the download process, resulting in the corruption of the single software file, The value 'invalidImage' will be returned. This value can not be set by the user.
1.3.6.1.4.1.9.6.1.101.2.13.1.1.3INTEGER {image1(1), image2(2), invalidImage(3)}read-writecurrent
rlResetStatus
OBJECT-TYPE
A bit mask that specifies system status before reset action is preformed. Reset is prohibited in stackable products if the images selected after reboot are not of the same release version in ALL stack units. Downgrade status specifies that there are some actions to be preformed on the CDB file before reset is preformed. 0x0 - OK 0x1 - noStackIntegrity 0x2 - downgrade
1.3.6.1.4.1.9.6.1.101.2.13.2Bits {ok(0), no-stack-integrity(1), downgrade(2)}read-onlycurrent
rndImageSize
OBJECT-TYPE
Max number of sectors currently allocated for image(s).
1.3.6.1.4.1.9.6.1.101.2.14INTEGERread-onlycurrent
rndBackupConfigurationEnabled
OBJECT-TYPE
Specifies whether the device supports backup-config parameters in lcli commands.
1.3.6.1.4.1.9.6.1.101.2.15TruthValueread-onlycurrent
rndImageInfo
OBJECT-IDENTITY
1.3.6.1.4.1.9.6.1.101.2.16
rndImageInfoTable
OBJECT-TYPE
The table contains information about images.
1.3.6.1.4.1.9.6.1.101.2.16.1not-accessiblecurrent
rndImageInfoEntry
OBJECT-TYPE
An entry in the rndImageInfoTable.
1.3.6.1.4.1.9.6.1.101.2.16.1.1not-accessiblecurrent
rndStackUnitNumber
OBJECT-TYPE
The unit number (for stackable devices) or 1 for 'stand alone' device.
1.3.6.1.4.1.9.6.1.101.2.16.1.1.1INTEGERread-writecurrent
rndImage1Name
OBJECT-TYPE
Indicates the file name of image-1 in the system.
1.3.6.1.4.1.9.6.1.101.2.16.1.1.2DisplayStringread-onlycurrent
rndImage2Name
OBJECT-TYPE
Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.9.6.1.101.2.16.1.1.3DisplayStringread-onlycurrent
rndImage1Version
OBJECT-TYPE
Indicates the version of image-1 in the system.
1.3.6.1.4.1.9.6.1.101.2.16.1.1.4DisplayStringread-onlycurrent
rndImage2Version
OBJECT-TYPE
Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.9.6.1.101.2.16.1.1.5DisplayStringread-onlycurrent
rndImage1Date
OBJECT-TYPE
Indicates the compilation date of image-1 in the system.
1.3.6.1.4.1.9.6.1.101.2.16.1.1.6DisplayStringread-onlycurrent
rndImage2Date
OBJECT-TYPE
Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.9.6.1.101.2.16.1.1.7DisplayStringread-onlycurrent
rndImage1Time
OBJECT-TYPE
Indicates the compilation time of image-1 in the system.
1.3.6.1.4.1.9.6.1.101.2.16.1.1.8DisplayStringread-onlycurrent
rndImage2Time
OBJECT-TYPE
Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.9.6.1.101.2.16.1.1.9DisplayStringread-onlycurrent
rndImage1Description
OBJECT-TYPE
Indicates the description of image-1 in the system.
1.3.6.1.4.1.9.6.1.101.2.16.1.1.10DisplayStringread-writecurrent
rndImage2Description
OBJECT-TYPE
Indicates the description of image-2 in the system.
1.3.6.1.4.1.9.6.1.101.2.16.1.1.11DisplayStringread-writecurrent
rndImage1InternalVersion
OBJECT-TYPE
In case customer (external) version exists, this field is indicates image-1 internal version
1.3.6.1.4.1.9.6.1.101.2.16.1.1.12DisplayStringread-onlycurrent
rndImage2InternalVersion
OBJECT-TYPE
In case customer (external) version exists, this field is indicates image-2 internal version
1.3.6.1.4.1.9.6.1.101.2.16.1.1.13DisplayStringread-onlycurrent
rlComponentsInfoTable
OBJECT-TYPE
The table contains information about components, their streams and baselines in the device images.
1.3.6.1.4.1.9.6.1.101.2.16.2not-accessiblecurrent
rlComponentsInfoEntry
OBJECT-TYPE
An entry in the rlComponentsInfoTable.
1.3.6.1.4.1.9.6.1.101.2.16.2.1not-accessiblecurrent
rlComponentsInfoStackUnitNumber
OBJECT-TYPE
The unit number (for stackable devices) or 1 for 'stand alone' device.
1.3.6.1.4.1.9.6.1.101.2.16.2.1.1INTEGERnot-accessiblecurrent
rlComponentsInfoImageId
OBJECT-TYPE
Indicates the image id in the unit
1.3.6.1.4.1.9.6.1.101.2.16.2.1.2RlImageIdTypenot-accessiblecurrent
rlComponentsInfoComponent
OBJECT-TYPE
Indicates the SW component name.
1.3.6.1.4.1.9.6.1.101.2.16.2.1.3DisplayString (SIZE(1..40))not-accessiblecurrent
rlComponentsInfoBaseline
OBJECT-TYPE
Indicates the version control baseline of the SW component name.
1.3.6.1.4.1.9.6.1.101.2.16.2.1.5DisplayStringread-onlycurrent