CISCOSB-IPV6FHS-MIB
- Registered at
- 1.3.6.1.4.1.9.6.1.101.215
- Last updated
- 2012-12-12 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2012-12-12 00:00
- Namespace
- cisco
- Source file
CISCOSB-IPV6FHS-MIB- Digest
sha256:d1bc9f43d66ec95622a591c948c15dc48e25551c91a32b5d1c2e894fdaefdb5a
Description
The private MIB module definition for IPv6 First Hop Security.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-BRIDGEMIBOBJECTS-MIB | VlanList1, VlanList2, VlanList3, VlanList4 |
| CISCOSB-DEVICEPARAMS-MIB | rndErrorDesc, rndErrorSeverity |
| CISCOSB-MIB | rlMacMulticast, rndNotifications, switch001 |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| Q-BRIDGE-MIB | PortList, VlanId, VlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB CISCOSB-BRIDGEMIBOBJECTS-MIB CISCOSB-DEVICEPARAMS-MIB CISCOSB-IPV6FHS-MIB CISCOSB-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| RlIpv6FhsSettingStatusType TEXTUAL-CONVENTION The setting status type. | current | |||
| RlIpv6FhsSettingType TEXTUAL-CONVENTION The setting type. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlFirstHopSec OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.215.1 | |||
| rlFirstHopSecPolicyTable OBJECT-TYPE The table specifies first hop security per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.1.1 | not-accessible | current | |
| rlFirstHopSecPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.1.1 | not-accessible | current | |
| rlFirstHopSecPolicyName OBJECT-TYPE The first hop security policy name | 1.3.6.1.4.1.9.6.1.101.215.1.1.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlFirstHopSecPolicyLogDrop OBJECT-TYPE Enable/disable of the logging of dropped packets. | 1.3.6.1.4.1.9.6.1.101.215.1.1.1.2 | RlIpv6FhsSettingStatusType | read-write | current |
| rlFirstHopSecPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.1.1.1.3 | RowStatus | read-create | current |
| rlFirstHopSecPortPolicyTable OBJECT-TYPE The table specifies first hop security policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.1.2 | not-accessible | current | |
| rlFirstHopSecPortPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.2.1 | not-accessible | current | |
| rlFirstHopSecPortPolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.1 | InterfaceIndex | not-accessible | current |
| rlFirstHopSecPortPolicyName OBJECT-TYPE The first hop security policy name | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.2 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlFirstHopSecPortPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecPortPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecPortPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecPortPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.6 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecPortPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.7 | RowStatus | read-create | current |
| rlFirstHopSecPolicyPortTable OBJECT-TYPE The table specifies first hop security policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.1.3 | not-accessible | current | |
| rlFirstHopSecPolicyPortEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.3.1 | not-accessible | current | |
| rlFirstHopSecPolicyPortName OBJECT-TYPE The first hop security policy name | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlFirstHopSecPolicyPortIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.2 | InterfaceIndex | not-accessible | current |
| rlFirstHopSecPolicyPortVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.3 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlFirstHopSecPolicyPortVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.4 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlFirstHopSecPolicyPortVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.5 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlFirstHopSecPolicyPortVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.6 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlFirstHopSecVlanPolicyTable OBJECT-TYPE The table specifies first hop security policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.1.4 | not-accessible | current | |
| rlFirstHopSecVlanPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.4.1 | not-accessible | current | |
| rlFirstHopSecVlanPolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.1.4.1.1 | VlanId | not-accessible | current |
| rlFirstHopSecVlanPolicyName OBJECT-TYPE The first hop security policy name | 1.3.6.1.4.1.9.6.1.101.215.1.4.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| rlFirstHopSecVlanPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.1.4.1.3 | RowStatus | read-create | current |
| rlFirstHopSecPolicyVlanTable OBJECT-TYPE The table specifies first hop security policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.1.5 | not-accessible | current | |
| rlFirstHopSecPolicyVlanEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.5.1 | not-accessible | current | |
| rlFirstHopSecPolicyVlanPolicyName OBJECT-TYPE The first hop security policy name | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlFirstHopSecPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecEnableVlanTable OBJECT-TYPE A table contains only one entry of a static vlan list. | 1.3.6.1.4.1.9.6.1.101.215.1.6 | not-accessible | current | |
| rlFirstHopSecEnableVlanEntry OBJECT-TYPE Statically created by local or network management vlan list | 1.3.6.1.4.1.9.6.1.101.215.1.6.1 | not-accessible | current | |
| rlFirstHopSecEnableVlanIndex OBJECT-TYPE The table contains only one static entry. | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlFirstHopSecEnableVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecEnableVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecEnableVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecEnableVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlFirstHopSecActivePolicyTable OBJECT-TYPE The table specifies first hop security per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.1.7 | not-accessible | current | |
| rlFirstHopSecActivePolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.7.1 | not-accessible | current | |
| rlFirstHopSecActivePolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.1 | InterfaceIndex | not-accessible | current |
| rlFirstHopSecActivePolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.2 | VlanId | not-accessible | current |
| rlFirstHopSecActivePolicyNamePort OBJECT-TYPE The first hop security policy name attached to given interface. | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.3 | DisplayString (SIZE(1..32)) | read-only | current |
| rlFirstHopSecActivePolicyNameVlan OBJECT-TYPE The first hop security policy name attached to given vlan. | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.4 | DisplayString (SIZE(1..32)) | read-only | current |
| rlFirstHopSecActivePolicyLogDrop OBJECT-TYPE Enable/disable of the logging of dropped packets. | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.5 | RlIpv6FhsSettingStatusType | read-only | current |
| rlFirstHopSecActivePolicyLogDropType OBJECT-TYPE rlFirstHopSecActivePolicyLogDrop setting type. | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.6 | RlIpv6FhsSettingType | read-only | current |
| rlFirstHopSecCountersTable OBJECT-TYPE The table displays first hop security counters | 1.3.6.1.4.1.9.6.1.101.215.1.8 | not-accessible | current | |
| rlFirstHopSecCountersEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1 | not-accessible | current | |
| rlFirstHopSecCountersIfIndex OBJECT-TYPE Interface index | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.1 | InterfaceIndex | not-accessible | current |
| rlFirstHopSecCountersRxNdpRA OBJECT-TYPE Number of NDP Router Advertisement messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.2 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdpRA OBJECT-TYPE Number of NDP Router Advertisement messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.3 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxNdpRS OBJECT-TYPE Number of NDP Router Solicitation messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.4 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdpRS OBJECT-TYPE Number of NDP Router Solicitation messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.5 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxNdpNA OBJECT-TYPE Number of NDP Neighbor Advertisement messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.6 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdpNA OBJECT-TYPE Number of NDP Neighbor Advertisement messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.7 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxNdpNS OBJECT-TYPE Number of NDP Neighbor Solicitation messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.8 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdpNS OBJECT-TYPE Number of NDP Neighbor Solicitation messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.9 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxNdpRedirect OBJECT-TYPE Number of NDP Redirect messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.10 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdpRedirect OBJECT-TYPE Number of NDP Redirect messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.11 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxDhcpAdverise OBJECT-TYPE Number of DHCPv6 ADVERTISE messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.12 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpAdverise OBJECT-TYPE Number of DHCPv6 ADVERTISE messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.13 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxDhcpReply OBJECT-TYPE Number of DHCPv6 REPLY messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.14 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpReply OBJECT-TYPE Number of DHCPv6 REPLY messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.15 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxDhcpReconfigure OBJECT-TYPE Number of DHCPv6 RECONFIGURE messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.16 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpReconfigure OBJECT-TYPE Number of DHCPv6 RECONFIGURE messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.17 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxDhcpRelayReply OBJECT-TYPE Number of DHCPv6 RELAY-REPLY messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.18 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpRelayReply OBJECT-TYPE Number of DHCPv6 RELAY-REPLY messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.19 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxDhcpLeasequeryReply OBJECT-TYPE Number of DHCPv6 LEASEQUERY-REPLY messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.20 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpLeasequeryReply OBJECT-TYPE Number of DHCPv6 LEASEQUERY-REPLY messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.21 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropRaGuardUnauthorizedMessage OBJECT-TYPE Number of dropped router messages received on host interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.22 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropRaGuardUnauthorizedHopLimit OBJECT-TYPE Number of dropped RA messages due to unauthorized Cur-Hop-Limit. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.23 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropRaGuardUnauthorizedManagedConfigFlag OBJECT-TYPE Number of dropped RA messages due to unauthorized Managed config flag. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.24 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropRaGuardUnauthorizedOtherConfigFlag OBJECT-TYPE Number of dropped RA messages due to unauthorized Other config flag. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.25 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropRaGuardUnauthorizedRouterPreference OBJECT-TYPE Number of dropped RA messages due to unauthorized router preference. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.26 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropRaGuardUnauthorizedAdvertisedPrefix OBJECT-TYPE Number of dropped RA messages due to unauthorized advertised prefix. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.27 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropRaGuardUnauthorizedSourceAddress OBJECT-TYPE Number of dropped RA messages due to unauthorized source address. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.28 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdInspectionInvalidSourceMac OBJECT-TYPE Number of dropped NDP messages due to invalid source MAC address. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.29 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdInspectionUnsecureMessage OBJECT-TYPE Number of dropped NDP messages due to being unsecure. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.30 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNdInspectionUnauthorizedSecLevel OBJECT-TYPE Number of dropped NDP messages due to unauthorized CGA sec-level. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.31 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpGuardUnauthorizedMessage OBJECT-TYPE Number of dropped DHCPv6 server messages on client interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.32 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpGuardUnauthorizedSourceAddress OBJECT-TYPE Number of dropped DHCPv6 server messages due to unauthorized source address. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.33 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpGuardUnauthorizedServerPreference OBJECT-TYPE Number of dropped DHCPv6 server messages due to unauthorized server preference. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.34 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpGuardUnauthorizedAssignedAddress OBJECT-TYPE Number of dropped DHCPv6 server messages due to unauthorized address in IA_ADDR. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.35 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropSourceGuardNoBinding OBJECT-TYPE Number of frame dropped by IPv6 Source Guard due to lack of binding in Neighbor Binding Table. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.36 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNbrBindingIntegrityIllegalIcmpv6 OBJECT-TYPE Number of dropped ICMPv6 messages due to one of the following reasons: invalid source address, invalid destination address, invalid Hop-Limit, invalid ICMP code, invalid ICMP length, invalid ICMP checksum, invalid target address, invalid flag, invalid option. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.37 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropNbrBindingIntegrityIllegalDhcpv6 OBJECT-TYPE Number of dropped DHCPv6 messages due to one of the following reasons: invalid source address, invalid destination address, invalid Hop-Limit, invalid ICMP code, invalid ICMP length, invalid ICMP checksum, invalid target address, invalid flag, invalid option. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.38 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxDhcpRelease OBJECT-TYPE Number of DHCPv6 RELEASE messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.39 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpRelease OBJECT-TYPE Number of DHCPv6 RELEASE messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.40 | Counter32 | read-only | current |
| rlFirstHopSecCountersRxDhcpDecline OBJECT-TYPE Number of DHCPv6 DECLINE messages received on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.41 | Counter32 | read-only | current |
| rlFirstHopSecCountersDropDhcpDecline OBJECT-TYPE Number of DHCPv6 DECLINE messages dropped on the interface. | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.42 | Counter32 | read-only | current |
| rlFirstHopSecLogDrop OBJECT-TYPE Enable/disable of the logging of dropped packets. | 1.3.6.1.4.1.9.6.1.101.215.1.9 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| rlFirstHopSecClearCounters OBJECT-TYPE When this object is set to zero IPv6 First Hop Security Counters are cleared on all interfaces. When this object is set to a valid interface index then IPv6 First Hop Security counters are cleared on this interface. Reading this object has no effect. | 1.3.6.1.4.1.9.6.1.101.215.1.10 | InterfaceIndexOrZero | read-write | current |
| rlFirstHopSecErrorCountersTable OBJECT-TYPE The table displays first hop security error counters | 1.3.6.1.4.1.9.6.1.101.215.1.11 | not-accessible | current | |
| rlFirstHopSecErrorCountersEntry OBJECT-TYPE Static row for this table. | 1.3.6.1.4.1.9.6.1.101.215.1.11.1 | not-accessible | current | |
| rlFirstHopSecErrorCountersIndex OBJECT-TYPE The table contains only one static entry. | 1.3.6.1.4.1.9.6.1.101.215.1.11.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlFirstHopSecErrorCountersNBTOverflow OBJECT-TYPE Counts Neighbor Binding Table overflow | 1.3.6.1.4.1.9.6.1.101.215.1.11.1.2 | Counter32 | read-only | current |
| rlFirstHopSecErrorCountersNPTOverflow OBJECT-TYPE Counts Neighbor Prefix Table overflow | 1.3.6.1.4.1.9.6.1.101.215.1.11.1.3 | Counter32 | read-only | current |
| rlFirstHopSecErrorCountersTcamOverflow OBJECT-TYPE Counts TCAM overflow | 1.3.6.1.4.1.9.6.1.101.215.1.11.1.4 | Counter32 | read-only | current |
| rlFirstHopSecClearErrorCounters OBJECT-TYPE When this object is set to true IPv6 First Hop Security Error Counters are cleared. Setting this object to false or reading this object has no effect. | 1.3.6.1.4.1.9.6.1.101.215.1.12 | TruthValue | read-write | current |
| rlNdInspection OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.215.2 | |||
| rlNdInspectionPolicyTable OBJECT-TYPE The table specifies ND inspection per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.2.1 | not-accessible | current | |
| rlNdInspectionPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.2.1.1 | not-accessible | current | |
| rlNdInspectionPolicyName OBJECT-TYPE The ND inspection policy name | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNdInspectionPolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.2 | INTEGER {unspecified(-1), host(1), router(2)} | read-write | current |
| rlNdInspectionPolicyDropUnsecured OBJECT-TYPE Enable/disable of dropping unsecured messages. | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.3 | RlIpv6FhsSettingStatusType | read-write | current |
| rlNdInspectionPolicySecLevelMin OBJECT-TYPE The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value of -1 indicates unspecified value. The value of -2 indicates verification of security level is disabled. | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.4 | Integer32 (-2 | -1 | 0..7) | read-write | current |
| rlNdInspectionPolicyValidateSrcMac OBJECT-TYPE Enable/disable validating of the source media access control (MAC) address against the link-layer address. | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.5 | RlIpv6FhsSettingStatusType | read-write | current |
| rlNdInspectionPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.6 | RowStatus | read-create | current |
| rlNdInspectionPortPolicyTable OBJECT-TYPE The table specifies ND inspection policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.2.2 | not-accessible | current | |
| rlNdInspectionPortPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.2.2.1 | not-accessible | current | |
| rlNdInspectionPortPolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.1 | InterfaceIndex | not-accessible | current |
| rlNdInspectionPortPolicyName OBJECT-TYPE The ND inspection policy name | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.2 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNdInspectionPortPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionPortPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionPortPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionPortPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.6 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionPortPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.7 | RowStatus | read-create | current |
| rlNdInspectionPolicyPortTable OBJECT-TYPE The table specifies ND inspection policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.2.3 | not-accessible | current | |
| rlNdInspectionPolicyPortEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.2.3.1 | not-accessible | current | |
| rlNdInspectionPolicyPortName OBJECT-TYPE The ND inspection policy name | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNdInspectionPolicyPortIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.2 | InterfaceIndex | not-accessible | current |
| rlNdInspectionPolicyPortVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.3 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNdInspectionPolicyPortVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.4 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNdInspectionPolicyPortVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.5 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNdInspectionPolicyPortVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.6 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNdInspectionVlanPolicyTable OBJECT-TYPE The table specifies ND inspection policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.2.4 | not-accessible | current | |
| rlNdInspectionVlanPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.2.4.1 | not-accessible | current | |
| rlNdInspectionVlanPolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.2.4.1.1 | VlanId | not-accessible | current |
| rlNdInspectionVlanPolicyName OBJECT-TYPE The ND inspection policy name | 1.3.6.1.4.1.9.6.1.101.215.2.4.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| rlNdInspectionVlanPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.2.4.1.3 | RowStatus | read-create | current |
| rlNdInspectionPolicyVlanTable OBJECT-TYPE The table specifies ND inspection policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.2.5 | not-accessible | current | |
| rlNdInspectionPolicyVlanEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.2.5.1 | not-accessible | current | |
| rlNdInspectionPolicyVlanPolicyName OBJECT-TYPE The ND inspection policy name | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNdInspectionPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionEnableVlanTable OBJECT-TYPE A table contains only one entry of a static vlan list. | 1.3.6.1.4.1.9.6.1.101.215.2.6 | not-accessible | current | |
| rlNdInspectionEnableVlanEntry OBJECT-TYPE Statically created by local or network management vlan list | 1.3.6.1.4.1.9.6.1.101.215.2.6.1 | not-accessible | current | |
| rlNdInspectionEnableVlanIndex OBJECT-TYPE The table contains only one static entry. | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlNdInspectionEnableVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionEnableVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionEnableVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionEnableVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNdInspectionActivePolicyTable OBJECT-TYPE The table specifies ND inspection per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.2.7 | not-accessible | current | |
| rlNdInspectionActivePolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1 | not-accessible | current | |
| rlNdInspectionActivePolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.1 | InterfaceIndex | not-accessible | current |
| rlNdInspectionActivePolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.2 | VlanId | not-accessible | current |
| rlNdInspectionActivePolicyNamePort OBJECT-TYPE The ND inspection policy name attached to given interface. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.3 | DisplayString (SIZE(1..32)) | read-only | current |
| rlNdInspectionActivePolicyNameVlan OBJECT-TYPE The ND inspection policy name attached to given vlan. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.4 | DisplayString (SIZE(1..32)) | read-only | current |
| rlNdInspectionActivePolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.5 | INTEGER {host(1), router(2)} | read-only | current |
| rlNdInspectionActivePolicyDeviceRoleType OBJECT-TYPE rlNdInspectionActivePolicyDeviceRole setting type. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.6 | RlIpv6FhsSettingType | read-only | current |
| rlNdInspectionActivePolicyDropUnsecured OBJECT-TYPE Enable/disable of dropping unsecured messages. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.7 | RlIpv6FhsSettingStatusType | read-only | current |
| rlNdInspectionActivePolicyDropUnsecuredType OBJECT-TYPE rlNdInspectionActivePolicyDropUnsecured setting type. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.8 | RlIpv6FhsSettingType | read-only | current |
| rlNdInspectionActivePolicySecLevelMin OBJECT-TYPE The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value of -2 indicates verification of security level is disabled. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.9 | Integer32 (-2 | 0..7) | read-only | current |
| rlNdInspectionActivePolicySecLevelMinType OBJECT-TYPE rlNdInspectionActivePolicySecLevelMin setting type. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.10 | RlIpv6FhsSettingType | read-only | current |
| rlNdInspectionActivePolicyValidateSrcMac OBJECT-TYPE Enable/disable validating of the source media access control (MAC) address against the link-layer address. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.11 | RlIpv6FhsSettingStatusType | read-only | current |
| rlNdInspectionActivePolicyValidateSrcMacType OBJECT-TYPE rlNdInspectionActivePolicyValidateSrcMac setting type. | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.12 | RlIpv6FhsSettingType | read-only | current |
| rlNdInspectionValidateSrcMac OBJECT-TYPE Enable/disable validating of the source media access control (MAC) address against the link-layer address. | 1.3.6.1.4.1.9.6.1.101.215.2.8 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| rlNdInspectionDropUnsecured OBJECT-TYPE Global configuration of dropping unsecured messages. Unsecure messages are neighbor discovery messages with no or invalid CGA and RSA Signature options. The value true(1) means that unsecured messages are dropped; the value false(2) means that they are not. | 1.3.6.1.4.1.9.6.1.101.215.2.9 | TruthValue | read-write | current |
| rlNdInspectionSecLevelMin OBJECT-TYPE The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value -2 indicates verification of security level is disabled. | 1.3.6.1.4.1.9.6.1.101.215.2.10 | Integer32 (-2 | 0..7) | read-write | current |
| rlRaGuard OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.215.3 | |||
| rlRaGuardPolicyTable OBJECT-TYPE The table specifies RA guard per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.3.1 | not-accessible | current | |
| rlRaGuardPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1 | not-accessible | current | |
| rlRaGuardPolicyName OBJECT-TYPE The RA Guard policy name. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlRaGuardPolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.2 | INTEGER {unspecified(-1), host(1), router(2)} | read-write | current |
| rlRaGuardPolicyHopLimitMin OBJECT-TYPE Minimum hop-count limit. A value of -1 indicates unspecified value. A value of 0 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.3 | Integer32 (-1 | 0 | 1..255) | read-write | current |
| rlRaGuardPolicyHopLimitMax OBJECT-TYPE Maximum hop-count limit. A value of -1 indicates unspecified value. A value of 0 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.4 | Integer32 (-1 | 0 | 1..255) | read-write | current |
| rlRaGuardPolicyManagedConfigFlag OBJECT-TYPE Configuration of -Managed address configuration- flag verification. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.5 | INTEGER {unspecified(-1), disabled(0), enabled-off(1), enabled-on(2)} | read-write | current |
| rlRaGuardPolicyMatchRaAddrSpecified OBJECT-TYPE Indicates whether the rlRaGuardPolicyMatchRaAddr is specified | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.6 | TruthValue | read-write | current |
| rlRaGuardPolicyMatchRaAddr OBJECT-TYPE The IPv6 prefix list to be matched for router's source IPv6 address. Relevant only when rlRaGuardPolicyMatchRaAddrSpecified is true. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.7 | DisplayString (SIZE(0..32)) | read-write | current |
| rlRaGuardPolicyMatchRaPrefixesSpecified OBJECT-TYPE Indicates whether the rlRaGuardPolicyMatchRaPrefixes is specified | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.8 | TruthValue | read-write | current |
| rlRaGuardPolicyMatchRaPrefixes OBJECT-TYPE The IPv6 prefix list to be matched for advertised prefixes. Relevant only when rlRaGuardPolicyMatchRaPrefixesSpecified is true. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.9 | DisplayString (SIZE(0..32)) | read-write | current |
| rlRaGuardPolicyOtherConfigFlag OBJECT-TYPE Configuration of -Other configuration- flag verification. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.10 | INTEGER {unspecified(-1), disabled(0), enabled-off(1), enabled-on(2)} | read-write | current |
| rlRaGuardPolicyRouterPrefMin OBJECT-TYPE Minimum advertised preference limit. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.11 | INTEGER {unspecified(-1), disabled(0), low(1), medium(2), high(3)} | read-write | current |
| rlRaGuardPolicyRouterPrefMax OBJECT-TYPE Maximum advertised preference limit. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.12 | INTEGER {unspecified(-1), disabled(0), low(1), medium(2), high(3)} | read-write | current |
| rlRaGuardPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.13 | RowStatus | read-create | current |
| rlRaGuardPortPolicyTable OBJECT-TYPE The table specifies RA guard policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.3.2 | not-accessible | current | |
| rlRaGuardPortPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1 | not-accessible | current | |
| rlRaGuardPortPolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.1 | InterfaceIndex | not-accessible | current |
| rlRaGuardPortPolicyName OBJECT-TYPE The RA Guard policy name. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.2 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlRaGuardPortPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardPortPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardPortPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardPortPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.6 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardPortPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.7 | RowStatus | read-create | current |
| rlRaGuardPolicyPortTable OBJECT-TYPE The table specifies RA guard policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.3.3 | not-accessible | current | |
| rlRaGuardPolicyPortEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.3.3.1 | not-accessible | current | |
| rlRaGuardPolicyPortName OBJECT-TYPE The RA Guard policy name | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlRaGuardPolicyPortIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.2 | InterfaceIndex | not-accessible | current |
| rlRaGuardPolicyPortVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.3 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlRaGuardPolicyPortVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.4 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlRaGuardPolicyPortVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.5 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlRaGuardPolicyPortVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.6 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlRaGuardVlanPolicyTable OBJECT-TYPE The table specifies RA guard policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.3.4 | not-accessible | current | |
| rlRaGuardVlanPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.3.4.1 | not-accessible | current | |
| rlRaGuardVlanPolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.3.4.1.1 | VlanId | not-accessible | current |
| rlRaGuardVlanPolicyName OBJECT-TYPE The RA Guard policy name. | 1.3.6.1.4.1.9.6.1.101.215.3.4.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| rlRaGuardVlanPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.3.4.1.3 | RowStatus | read-create | current |
| rlRaGuardPolicyVlanTable OBJECT-TYPE The table specifies RA guard policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.3.5 | not-accessible | current | |
| rlRaGuardPolicyVlanEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.3.5.1 | not-accessible | current | |
| rlRaGuardPolicyVlanPolicyName OBJECT-TYPE The RA Guard policy name | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlRaGuardPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardEnableVlanTable OBJECT-TYPE A table contains only one entry of a static vlan list. | 1.3.6.1.4.1.9.6.1.101.215.3.6 | not-accessible | current | |
| rlRaGuardEnableVlanEntry OBJECT-TYPE Statically created by local or network management vlan list | 1.3.6.1.4.1.9.6.1.101.215.3.6.1 | not-accessible | current | |
| rlRaGuardEnableVlanIndex OBJECT-TYPE The table contains only one static entry. | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlRaGuardEnableVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardEnableVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardEnableVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardEnableVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlRaGuardActivePolicyTable OBJECT-TYPE The table specifies RA Guard per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.3.7 | not-accessible | current | |
| rlRaGuardActivePolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1 | not-accessible | current | |
| rlRaGuardActivePolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.1 | InterfaceIndex | not-accessible | current |
| rlRaGuardActivePolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.2 | VlanId | not-accessible | current |
| rlRaGuardActivePolicyNamePort OBJECT-TYPE The RA Guard policy name attached to given interface. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.3 | DisplayString (SIZE(1..32)) | read-only | current |
| rlRaGuardActivePolicyNameVlan OBJECT-TYPE The RA Guard policy name attached to given vlan. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.4 | DisplayString (SIZE(1..32)) | read-only | current |
| rlRaGuardActivePolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.5 | INTEGER {host(1), router(2)} | read-only | current |
| rlRaGuardActivePolicyDeviceRoleType OBJECT-TYPE rlRaGuardActivePolicyDeviceRole setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.6 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyHopLimitMin OBJECT-TYPE Minimum hop-count limit. A value of 0 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.7 | Integer32 (0 | 1..255) | read-only | current |
| rlRaGuardActivePolicyHopLimitMinType OBJECT-TYPE rlRaGuardActivePolicyHopLimitMin setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.8 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyHopLimitMax OBJECT-TYPE Maximum hop-count limit. A value of 0 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.9 | Integer32 (0 | 1..255) | read-only | current |
| rlRaGuardActivePolicyHopLimitMaxType OBJECT-TYPE rlRaGuardActivePolicyHopLimitMax setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.10 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyManagedConfigFlag OBJECT-TYPE Configuration of -Managed address configuration- flag verification. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.11 | INTEGER {disabled(0), enabled-off(1), enabled-on(2)} | read-only | current |
| rlRaGuardActivePolicyManagedConfigFlagType OBJECT-TYPE rlRaGuardActivePolicyManagedConfigFlag setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.12 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyMatchRaAddr OBJECT-TYPE The IPv6 prefix list to be matched for router's source IPv6 address. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.13 | DisplayString (SIZE(0..32)) | read-only | current |
| rlRaGuardActivePolicyMatchRaAddrType OBJECT-TYPE rlRaGuardActivePolicyMatchRaAddr setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.14 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyMatchRaPrefixes OBJECT-TYPE The IPv6 prefix list to be matched for advertised prefixes. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.15 | DisplayString (SIZE(0..32)) | read-only | current |
| rlRaGuardActivePolicyMatchRaPrefixesType OBJECT-TYPE rlRaGuardActivePolicyMatchRaPrefixes setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.16 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyOtherConfigFlag OBJECT-TYPE Configuration of -Other configuration- flag verification. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.17 | INTEGER {disabled(0), enabled-off(1), enabled-on(2)} | read-only | current |
| rlRaGuardActivePolicyOtherConfigFlagType OBJECT-TYPE rlRaGuardActivePolicyOtherConfigFlag setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.18 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyRouterPrefMin OBJECT-TYPE Minimum advertised preference limit. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.19 | INTEGER {disabled(0), low(1), medium(2), high(3)} | read-only | current |
| rlRaGuardActivePolicyRouterPrefMinType OBJECT-TYPE rlRaGuardActivePolicyRouterPrefMin setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.20 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardActivePolicyRouterPrefMax OBJECT-TYPE Maximum advertised preference limit. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.21 | INTEGER {disabled(0), low(1), medium(2), high(3)} | read-only | current |
| rlRaGuardActivePolicyRouterPrefMaxType OBJECT-TYPE rlRaGuardActivePolicyRouterPrefMax setting type. | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.22 | RlIpv6FhsSettingType | read-only | current |
| rlRaGuardHopLimitMin OBJECT-TYPE Minimum hop-count limit. A value of zero indicates that hop-count limit is not verified. | 1.3.6.1.4.1.9.6.1.101.215.3.8 | Integer32 (0 | 1..255) | read-write | current |
| rlRaGuardHopLimitMax OBJECT-TYPE Maximum hop-count limit. A value of zero indicates that hop-count limit is not verified. | 1.3.6.1.4.1.9.6.1.101.215.3.9 | Integer32 (0 | 1..255) | read-write | current |
| rlRaGuardManagedConfigFlag OBJECT-TYPE Global configuration of -Managed address configuration- flag verification. | 1.3.6.1.4.1.9.6.1.101.215.3.10 | INTEGER {disabled(0), enabled-off(1), enabled-on(2)} | read-write | current |
| rlRaGuardOtherConfigFlag OBJECT-TYPE Global configuration of -Other configuration- flag verification. | 1.3.6.1.4.1.9.6.1.101.215.3.11 | INTEGER {disabled(0), enabled-off(1), enabled-on(2)} | read-write | current |
| rlRaGuardRouterPrefMin OBJECT-TYPE Minimum advertised preference limit. | 1.3.6.1.4.1.9.6.1.101.215.3.12 | INTEGER {disabled(0), low(1), medium(2), high(3)} | read-write | current |
| rlRaGuardRouterPrefMax OBJECT-TYPE Maximum advertised preference limit. | 1.3.6.1.4.1.9.6.1.101.215.3.13 | INTEGER {disabled(0), low(1), medium(2), high(3)} | read-write | current |
| rlNbrBindingIntegrity OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.215.4 | |||
| rlNbrBindingIntegrityPolicyTable OBJECT-TYPE The table specifies Neighbor Binding Integrity per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.4.1 | not-accessible | current | |
| rlNbrBindingIntegrityPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1 | not-accessible | current | |
| rlNbrBindingIntegrityPolicyName OBJECT-TYPE Neighbor Binding Integrity policy name. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNbrBindingIntegrityPolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.2 | INTEGER {unspecified(-1), perimeter(1), internal(2)} | read-write | current |
| rlNbrBindingIntegrityPolicyLogBinding OBJECT-TYPE Enable/disable logging of Neighbor Binding Table events | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.3 | RlIpv6FhsSettingStatusType | read-write | current |
| rlNbrBindingIntegrityPolicyMaxEntriesVlanLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.4 | Integer32 (-2 | -1 | 0..65535) | read-write | current |
| rlNbrBindingIntegrityPolicyMaxEntriesInterfaceLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.5 | Integer32 (-2 | -1 | 0..65535) | read-write | current |
| rlNbrBindingIntegrityPolicyMaxEntriesMacLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.6 | Integer32 (-2 | -1 | 0..65535) | read-write | current |
| rlNbrBindingIntegrityPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.7 | RowStatus | read-create | current |
| rlNbrBindingIntegrityPolicyPrefixValidation OBJECT-TYPE Enable/disable address prefix validation using Neighbor Prefix Table. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.8 | RlIpv6FhsSettingStatusType | read-write | current |
| rlNbrBindingIntegrityPolicyAddressConfig OBJECT-TYPE Specify the allowed methods for address binding in Neighbor Binding Table. autoconfig(1) refers to stateless address autoconfiguration. autoconfigAndManual(3) allows manual and stateless address autoconfiguration. dhcp(4) permits binding only from DHCP. autoconfigAndDhcp(5) binds from DHCP and stateless address autoconfiguration. autoconfigManualAndDhcp(7) binds from Manual, DHCP and stateless address autoconfiguration. | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.9 | INTEGER {unspecified(-1), autoconfig(1), autoconfigAndManual(3), dhcp(4), autoconfigAndDhcp(5), autoconfigManualAndDhcp(7)} | read-write | current |
| rlNbrBindingIntegrityPortPolicyTable OBJECT-TYPE The table specifies Neighbor Binding Integrity policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.4.2 | not-accessible | current | |
| rlNbrBindingIntegrityPortPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1 | not-accessible | current | |
| rlNbrBindingIntegrityPortPolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.1 | InterfaceIndex | not-accessible | current |
| rlNbrBindingIntegrityPortPolicyName OBJECT-TYPE The Neighbor Binding Integrity policy name. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.2 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNbrBindingIntegrityPortPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityPortPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityPortPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityPortPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.6 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityPortPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.7 | RowStatus | read-create | current |
| rlNbrBindingIntegrityPolicyPortTable OBJECT-TYPE The table specifies Neighbor Binding Integrity policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.4.3 | not-accessible | current | |
| rlNbrBindingIntegrityPolicyPortEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.3.1 | not-accessible | current | |
| rlNbrBindingIntegrityPolicyPortName OBJECT-TYPE The Neighbor Binding Integrity policy name | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNbrBindingIntegrityPolicyPortIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.2 | InterfaceIndex | not-accessible | current |
| rlNbrBindingIntegrityPolicyPortVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.3 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNbrBindingIntegrityPolicyPortVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.4 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNbrBindingIntegrityPolicyPortVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.5 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNbrBindingIntegrityPolicyPortVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.6 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlNbrBindingIntegrityVlanPolicyTable OBJECT-TYPE The table specifies Neighbor Binding Integrity policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.4.4 | not-accessible | current | |
| rlNbrBindingIntegrityVlanPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.4.1 | not-accessible | current | |
| rlNbrBindingIntegrityVlanPolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.4.4.1.1 | VlanId | not-accessible | current |
| rlNbrBindingIntegrityVlanPolicyName OBJECT-TYPE The Neighbor Binding Integrity policy name. | 1.3.6.1.4.1.9.6.1.101.215.4.4.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| rlNbrBindingIntegrityVlanPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.4.4.1.3 | RowStatus | read-create | current |
| rlNbrBindingIntegrityPolicyVlanTable OBJECT-TYPE The table specifies Neighbor Binding Integrity policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.4.5 | not-accessible | current | |
| rlNbrBindingIntegrityPolicyVlanEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.5.1 | not-accessible | current | |
| rlNbrBindingIntegrityPolicyVlanPolicyName OBJECT-TYPE The Neighbor Binding Integrity policy name | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlNbrBindingIntegrityPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityEnableVlanTable OBJECT-TYPE A table contains only one entry of a static vlan list. | 1.3.6.1.4.1.9.6.1.101.215.4.6 | not-accessible | current | |
| rlNbrBindingIntegrityEnableVlanEntry OBJECT-TYPE Statically created by local or network management vlan list | 1.3.6.1.4.1.9.6.1.101.215.4.6.1 | not-accessible | current | |
| rlNbrBindingIntegrityEnableVlanIndex OBJECT-TYPE The table contains only one static entry. | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlNbrBindingIntegrityEnableVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityEnableVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityEnableVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityEnableVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlNbrBindingIntegrityBindingTable OBJECT-TYPE The table specifies Neighbor Binding Integrity binding table. | 1.3.6.1.4.1.9.6.1.101.215.4.7 | not-accessible | current | |
| rlNbrBindingIntegrityBindingEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1 | not-accessible | current | |
| rlNbrBindingIntegrityBindingVlanTag OBJECT-TYPE The binding entry's VLAN tag. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.1 | VlanId | not-accessible | current |
| rlNbrBindingIntegrityBindingSourceAddressType OBJECT-TYPE The binding entry's INET address type of the source. The only inet type that is supported is ipv6. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.2 | InetAddressType | not-accessible | current |
| rlNbrBindingIntegrityBindingSourceAddress OBJECT-TYPE The binding entry's INET address of the source. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.3 | InetAddress | not-accessible | current |
| rlNbrBindingIntegrityBindingIfIndex OBJECT-TYPE The binding entry's anchor interface. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.4 | InterfaceIndex | read-write | current |
| rlNbrBindingIntegrityBindingMacAddress OBJECT-TYPE The binding entry's anchor MAC Address. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.5 | MacAddress | read-write | current |
| rlNbrBindingIntegrityBindingOrigin OBJECT-TYPE The binding entry's origin: local, static, ndp, dhcp. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.6 | INTEGER {static(1), ndp(2), dhcp(3)} | read-only | current |
| rlNbrBindingIntegrityBindingState OBJECT-TYPE The binding entry's state: valid, tentative. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.7 | INTEGER {valid(0), tentative(1)} | read-only | current |
| rlNbrBindingIntegrityBindingExpiryTime OBJECT-TYPE The time in seconds until the entry is expired. A value of 4294967295 denotes infinite lifetime. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.8 | Unsigned32 | read-only | current |
| rlNbrBindingIntegrityBindingRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.9 | RowStatus | read-create | current |
| rlNbrBindingIntegrityBindingTCAMOverflow OBJECT-TYPE Signs if entry is configured in TCAM | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.10 | TruthValue | read-only | current |
| rlNbrBindingIntegrityClearTable OBJECT-TYPE The table clears Neighbor Binding Integrity binding table according to configured filters. | 1.3.6.1.4.1.9.6.1.101.215.4.8 | not-accessible | current | |
| rlNbrBindingIntegrityClearEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1 | not-accessible | current | |
| rlNbrBindingIntegrityClearIndex OBJECT-TYPE The row index in the table. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlNbrBindingIntegrityClearVlanTag OBJECT-TYPE Clear binding entries with this VLAN tag. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.2 | VlanId | read-write | current |
| rlNbrBindingIntegrityClearSourceAddressType OBJECT-TYPE Clear binding entries with this source address type. The only inet type that is supported is ipv6. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.3 | InetAddressType | read-write | current |
| rlNbrBindingIntegrityClearSourceAddress OBJECT-TYPE Clear binding entries with this source address. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.4 | InetAddress | read-write | current |
| rlNbrBindingIntegrityClearIfIndex OBJECT-TYPE cClear binding entries with this anchor interface. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.5 | InterfaceIndex | read-write | current |
| rlNbrBindingIntegrityClearMacAddress OBJECT-TYPE clear binding entries with this anchor MAC Address. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.6 | MacAddress | read-write | current |
| rlNbrBindingIntegrityClearRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.7 | RowStatus | read-create | current |
| rlNbrBindingIntegrityClearBindMethod OBJECT-TYPE clear dynamic entries bound using the specified method. | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.8 | INTEGER {ndp(1), dhcp(2)} | read-write | current |
| rlNbrBindingIntegrityActivePolicyTable OBJECT-TYPE The table specifies Neighbor Binding Integrity per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.4.9 | not-accessible | current | |
| rlNbrBindingIntegrityActivePolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1 | not-accessible | current | |
| rlNbrBindingIntegrityActivePolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.1 | InterfaceIndex | not-accessible | current |
| rlNbrBindingIntegrityActivePolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.2 | VlanId | not-accessible | current |
| rlNbrBindingIntegrityActivePolicyNamePort OBJECT-TYPE The Neighbor Binding Integrity policy name attached to given interface. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.3 | DisplayString (SIZE(1..32)) | read-only | current |
| rlNbrBindingIntegrityActivePolicyNameVlan OBJECT-TYPE The Neighbor Binding Integrity policy name attached to given vlan. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.4 | DisplayString (SIZE(1..32)) | read-only | current |
| rlNbrBindingIntegrityActivePolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.5 | INTEGER {perimeter(1), internal(2)} | read-only | current |
| rlNbrBindingIntegrityActivePolicyDeviceRoleType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyDeviceRole setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.6 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityActivePolicyLogBinding OBJECT-TYPE Enable/disable logging of Neighbor Binding Table events. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.7 | RlIpv6FhsSettingStatusType | read-only | current |
| rlNbrBindingIntegrityActivePolicyLogBindingType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyLogBinding setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.8 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.9 | Integer32 (-2 | 0..65535) | read-only | current |
| rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimitType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimit setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.10 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.11 | Integer32 (-2 | 0..65535) | read-only | current |
| rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimitType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimit setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.12 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.13 | Integer32 (-2 | 0..65535) | read-only | current |
| rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimitType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimit setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.14 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityActivePolicyBindingLifetime OBJECT-TYPE Neighbor Binding entry's default lifetime in seconds. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.15 | Integer32 (60..3600) | read-only | current |
| rlNbrBindingIntegrityActivePolicyBindingLifetimeType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyBindingLifetime setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.16 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityActivePolicyPrefixValidation OBJECT-TYPE Enable/disable address prefix validation using Neighbor Prefix Table. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.17 | RlIpv6FhsSettingStatusType | read-only | current |
| rlNbrBindingIntegrityActivePolicyPrefixValidationType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyPrefixValidation setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.18 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityActivePolicyAddressConfig OBJECT-TYPE Specify the allowed methods for address binding in Neighbor Binding Table. autoconfig(1) refers to stateless address autoconfiguration. autoconfigAndManual(3) allows manual and stateless address autoconfiguration. dhcp(4) permits binding only from DHCP. autoconfigAndDhcp(5) binds from DHCP and stateless address autoconfiguration. autoconfigManualAndDhcp(7) binds from Manual, DHCP and stateless address autoconfiguration. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.19 | INTEGER {autoconfig(1), autoconfigAndManual(3), dhcp(4), autoconfigAndDhcp(5), autoconfigManualAndDhcp(7)} | read-only | current |
| rlNbrBindingIntegrityActivePolicyAddressConfigType OBJECT-TYPE rlNbrBindingIntegrityActivePolicyAddressConfig setting type. | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.20 | RlIpv6FhsSettingType | read-only | current |
| rlNbrBindingIntegrityBindingLifetime OBJECT-TYPE Neighbor Binding entry's default lifetime in seconds. | 1.3.6.1.4.1.9.6.1.101.215.4.10 | Integer32 (60..3600) | read-write | current |
| rlNbrBindingIntegrityLogBinding OBJECT-TYPE Enable/disable logging of Neighbor Binding Table events | 1.3.6.1.4.1.9.6.1.101.215.4.11 | TruthValue | read-write | current |
| rlNbrBindingIntegrityMaxEntriesVlanLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.12 | Integer32 (-2 | 0..65535) | read-write | current |
| rlNbrBindingIntegrityMaxEntriesInterfaceLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.13 | Integer32 (-2 | 0..65535) | read-write | current |
| rlNbrBindingIntegrityMaxEntriesMacLimit OBJECT-TYPE Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -2 indicates there is no limit. | 1.3.6.1.4.1.9.6.1.101.215.4.14 | Integer32 (-2 | 0..65535) | read-write | current |
| rlNbrBindingIntegrityEntriesNum OBJECT-TYPE Number of entries in Neighbor Binding Table. | 1.3.6.1.4.1.9.6.1.101.215.4.15 | Integer32 | read-only | current |
| rlNbrBindingIntegrityPrefixValidation OBJECT-TYPE Enable/disable address prefix validation using Neighbor Prefix Table. | 1.3.6.1.4.1.9.6.1.101.215.4.16 | TruthValue | read-write | current |
| rlNbrBindingIntegrityAddressConfig OBJECT-TYPE Specify the allowed methods for address binding in Neighbor Binding Table. autoconfig(1) refers to stateless address autoconfiguration. autoconfigAndManual(3) allows manual and stateless address autoconfiguration. dhcp(4) permits binding only from DHCP. autoconfigAndDhcp(5) binds from DHCP and stateless address autoconfiguration. autoconfigManualAndDhcp(7) binds from Manual, DHCP and stateless address autoconfiguration. | 1.3.6.1.4.1.9.6.1.101.215.4.17 | INTEGER {autoconfig(1), autoconfigAndManual(3), dhcp(4), autoconfigAndDhcp(5), autoconfigManualAndDhcp(7)} | read-write | current |
| rlNbrBindingIntegrityBindingPrefixTable OBJECT-TYPE The table specifies Neighbor Binding Integrity binding table. | 1.3.6.1.4.1.9.6.1.101.215.4.18 | not-accessible | current | |
| rlNbrBindingIntegrityBindingPrefixEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1 | not-accessible | current | |
| rlNbrBindingIntegrityBindingPrefixVlanTag OBJECT-TYPE The binding prefix entry's VLAN tag. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.1 | VlanId | not-accessible | current |
| rlNbrBindingIntegrityBindingPrefixAddressType OBJECT-TYPE The binding prefix entry's INET address type. The only inet type that is supported is ipv6. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.2 | InetAddressType | not-accessible | current |
| rlNbrBindingIntegrityBindingPrefixAddress OBJECT-TYPE The binding prefix entry's address. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.3 | InetAddress | not-accessible | current |
| rlNbrBindingIntegrityBindingPrefixLength OBJECT-TYPE Indicates the number of leading one bits that form the mask to be logical-ANDed with the inet address before being compared to the value in the rlNbrBindingIntegrityBindingPrefixAddress field. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.4 | InetAddressPrefixLength | not-accessible | current |
| rlNbrBindingIntegrityBindingPrefixOrigin OBJECT-TYPE The binding prefix entry's origin: static or dynamic | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.5 | INTEGER {static(1), dynamic(2)} | read-only | current |
| rlNbrBindingIntegrityBindingPrefixAllowAutoconfig OBJECT-TYPE Indicates whether the prefix can be used for stateless address auto-configuration. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.6 | TruthValue | read-write | current |
| rlNbrBindingIntegrityBindingPrefixExpiryTime OBJECT-TYPE The time in seconds until the entry is expired. A value of 4294967295 denotes infinite lifetime. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.7 | Unsigned32 | read-only | current |
| rlNbrBindingIntegrityBindingPrefixRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.4.18.1.8 | RowStatus | read-create | current |
| rlNbrBindingIntegrityClearPrefixTable OBJECT-TYPE The table clears Neighbor Binding Integrity Binding Prefix table according to configured filters. | 1.3.6.1.4.1.9.6.1.101.215.4.19 | not-accessible | current | |
| rlNbrBindingIntegrityClearPrefixEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.4.19.1 | not-accessible | current | |
| rlNbrBindingIntegrityClearPrefixIndex OBJECT-TYPE The row index in the table. | 1.3.6.1.4.1.9.6.1.101.215.4.19.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlNbrBindingIntegrityClearPrefixVlanTag OBJECT-TYPE Clear binding prefix entries with this VLAN tag. | 1.3.6.1.4.1.9.6.1.101.215.4.19.1.2 | VlanId | read-write | current |
| rlNbrBindingIntegrityClearPrefixAddressType OBJECT-TYPE Clear binding prefix entries with this address type. The only inet type that is supported is ipv6. | 1.3.6.1.4.1.9.6.1.101.215.4.19.1.3 | InetAddressType | read-write | current |
| rlNbrBindingIntegrityClearPrefixAddress OBJECT-TYPE Clear binding prefix entries with this address prefix. | 1.3.6.1.4.1.9.6.1.101.215.4.19.1.4 | InetAddress | read-write | current |
| rlNbrBindingIntegrityClearPrefixLength OBJECT-TYPE Indicates the number of leading one bits that form the mask to be logical-ANDed with the inet address before being compared to the value in the rlNbrBindingIntegrityClearPrefixAddress field. | 1.3.6.1.4.1.9.6.1.101.215.4.19.1.5 | InetAddressPrefixLength | read-write | current |
| rlNbrBindingIntegrityClearPrefixRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.4.19.1.6 | RowStatus | read-create | current |
| rlNbrBindingIntegrityClearDhcpRecoveryFile OBJECT-TYPE Clear neighbor binding integrity's DHCP recovery file. Setting a value of zero clears the information for all VLANs. Setting a non-zero value clears the information for a specific VLAN. Reading this object has not effect. | 1.3.6.1.4.1.9.6.1.101.215.4.20 | Integer32 (0..4094) | read-write | current |
| rlNbrBindingIntegrityPrefixEntriesNum OBJECT-TYPE Number of entries in Neighbor Prefix Table. | 1.3.6.1.4.1.9.6.1.101.215.4.21 | Integer32 | read-only | current |
| rlDhcpGuard OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.215.5 | |||
| rlDhcpGuardPolicyTable OBJECT-TYPE The table specifies DHCPv6 guard per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.5.1 | not-accessible | current | |
| rlDhcpGuardPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1 | not-accessible | current | |
| rlDhcpGuardPolicyName OBJECT-TYPE The DHCPv6 guard policy name | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlDhcpGuardPolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.2 | INTEGER {unspecified(-1), client(1), server(2)} | read-write | current |
| rlDhcpGuardPolicyMatchServerAddrSpecified OBJECT-TYPE Indicates whether the rlDhcpGuardPolicyMatchServerAddr is specified. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.3 | TruthValue | read-write | current |
| rlDhcpGuardPolicyMatchServerAddr OBJECT-TYPE The IPv6 prefix list to be matched for IPv6 address in messages sent by DHCPv6 servers. Relevant only when rlDhcpGuardPolicyMatchServerAddrSpecified is true. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.4 | DisplayString (SIZE(0..32)) | read-write | current |
| rlDhcpGuardPolicyMatchReplyAddrSpecified OBJECT-TYPE Indicates whether the rlDhcpGuardPolicyMatchReplyAddr is specified. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.5 | TruthValue | read-write | current |
| rlDhcpGuardPolicyMatchReplyAddr OBJECT-TYPE The IPv6 prefix list to be matched for assigned IPv6 addressed by DHCPv6 servers. Relevant only when rlDhcpGuardPolicyMatchReplyAddrSpecified is true. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.6 | DisplayString (SIZE(0..32)) | read-write | current |
| rlDhcpGuardPolicyPrefMin OBJECT-TYPE Minimum preference value limit. A value of -1 indicates unspecified value. A value of -2 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.7 | Integer32 (-2 | -1 | 0..255) | read-write | current |
| rlDhcpGuardPolicyPrefMax OBJECT-TYPE Maximum preference value limit. A value of -1 indicates unspecified value. A value of -2 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.8 | Integer32 (-2 | -1 | 0..255) | read-write | current |
| rlDhcpGuardPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.9 | RowStatus | read-create | current |
| rlDhcpGuardPortPolicyTable OBJECT-TYPE The table specifies DHCPv6 guard policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.5.2 | not-accessible | current | |
| rlDhcpGuardPortPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.5.2.1 | not-accessible | current | |
| rlDhcpGuardPortPolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.1 | InterfaceIndex | not-accessible | current |
| rlDhcpGuardPortPolicyName OBJECT-TYPE The DHCPv6 guard policy name | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.2 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlDhcpGuardPortPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardPortPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardPortPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardPortPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.6 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardPortPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.7 | RowStatus | read-create | current |
| rlDhcpGuardPolicyPortTable OBJECT-TYPE The table specifies DHCPv6 guard policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.5.3 | not-accessible | current | |
| rlDhcpGuardPolicyPortEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.5.3.1 | not-accessible | current | |
| rlDhcpGuardPolicyPortName OBJECT-TYPE The DHCPv6 guard policy name | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlDhcpGuardPolicyPortIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.2 | InterfaceIndex | not-accessible | current |
| rlDhcpGuardPolicyPortVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.3 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlDhcpGuardPolicyPortVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.4 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlDhcpGuardPolicyPortVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.5 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlDhcpGuardPolicyPortVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.6 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlDhcpGuardVlanPolicyTable OBJECT-TYPE The table specifies DHCPv6 guard policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.5.4 | not-accessible | current | |
| rlDhcpGuardVlanPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.5.4.1 | not-accessible | current | |
| rlDhcpGuardVlanPolicyVlanTag OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.5.4.1.1 | VlanId | not-accessible | current |
| rlDhcpGuardVlanPolicyName OBJECT-TYPE The DHCPv6 guard policy name | 1.3.6.1.4.1.9.6.1.101.215.5.4.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| rlDhcpGuardVlanPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.5.4.1.3 | RowStatus | read-create | current |
| rlDhcpGuardPolicyVlanTable OBJECT-TYPE The table specifies DHCPv6 guard policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.5.5 | not-accessible | current | |
| rlDhcpGuardPolicyVlanEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.5.5.1 | not-accessible | current | |
| rlDhcpGuardPolicyVlanPolicyName OBJECT-TYPE The DHCPv6 guard policy name | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlDhcpGuardPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardEnableVlanTable OBJECT-TYPE A table contains only one entry of a static vlan list. | 1.3.6.1.4.1.9.6.1.101.215.5.6 | not-accessible | current | |
| rlDhcpGuardEnableVlanEntry OBJECT-TYPE Statically created by local or network management vlan list | 1.3.6.1.4.1.9.6.1.101.215.5.6.1 | not-accessible | current | |
| rlDhcpGuardEnableVlanIndex OBJECT-TYPE The table contains only one static entry. | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlDhcpGuardEnableVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardEnableVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardEnableVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardEnableVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlDhcpGuardActivePolicyTable OBJECT-TYPE The table specifies DHCPv6 guard per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.5.7 | not-accessible | current | |
| rlDhcpGuardActivePolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1 | not-accessible | current | |
| rlDhcpGuardActivePolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.1 | InterfaceIndex | not-accessible | current |
| rlDhcpGuardActivePolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.2 | VlanId | not-accessible | current |
| rlDhcpGuardActivePolicyNamePort OBJECT-TYPE The DHCPv6 guard policy name attached to given interface. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.3 | DisplayString (SIZE(1..32)) | read-only | current |
| rlDhcpGuardActivePolicyNameVlan OBJECT-TYPE The DHCPv6 guard policy name attached to given vlan. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.4 | DisplayString (SIZE(1..32)) | read-only | current |
| rlDhcpGuardActivePolicyDeviceRole OBJECT-TYPE Specify the role of the device attached. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.5 | INTEGER {client(1), server(2)} | read-only | current |
| rlDhcpGuardActivePolicyDeviceRoleType OBJECT-TYPE rlDhcpGuardActivePolicyDeviceRole setting type. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.6 | RlIpv6FhsSettingType | read-only | current |
| rlDhcpGuardActivePolicyMatchServerAddr OBJECT-TYPE The IPv6 prefix list to be matched for IPv6 address in messages sent by DHCPv6 servers. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.7 | DisplayString (SIZE(0..32)) | read-only | current |
| rlDhcpGuardActivePolicyMatchServerAddrType OBJECT-TYPE rlDhcpGuardActivePolicyMatchServerAddr setting type. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.8 | RlIpv6FhsSettingType | read-only | current |
| rlDhcpGuardActivePolicyMatchReplyAddr OBJECT-TYPE The IPv6 prefix list to be matched for assigned IPv6 addressed by DHCPv6 servers. The empty string means this validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.9 | DisplayString (SIZE(0..32)) | read-only | current |
| rlDhcpGuardActivePolicyMatchReplyAddrType OBJECT-TYPE rlDhcpGuardActivePolicyMatchReplyAddr setting type. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.10 | RlIpv6FhsSettingType | read-only | current |
| rlDhcpGuardActivePolicyPrefMin OBJECT-TYPE Minimum preference value limit. A value of -2 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.11 | Integer32 (-2 | 0..255) | read-only | current |
| rlDhcpGuardActivePolicyPrefMinType OBJECT-TYPE rlDhcpGuardActivePolicyPrefMin setting type. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.12 | RlIpv6FhsSettingType | read-only | current |
| rlDhcpGuardActivePolicyPrefMax OBJECT-TYPE Maximum preference value limit. A value of -2 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.13 | Integer32 (-2 | 0..255) | read-only | current |
| rlDhcpGuardActivePolicyPrefMaxType OBJECT-TYPE rlDhcpGuardActivePolicyPrefMax setting type. | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.14 | RlIpv6FhsSettingType | read-only | current |
| rlDhcpGuardPrefMin OBJECT-TYPE Minimum preference value limit. A value of -2 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.8 | Integer32 (-2 | 0..255) | read-write | current |
| rlDhcpGuardPrefMax OBJECT-TYPE Maximum preference value limit. A value of -2 indicates validation is disabled. | 1.3.6.1.4.1.9.6.1.101.215.5.9 | Integer32 (-2 | 0..255) | read-write | current |
| rlSourceGuard OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.215.6 | |||
| rlSourceGuardPolicyTable OBJECT-TYPE The table specifies Source Guard per policy configurations. | 1.3.6.1.4.1.9.6.1.101.215.6.1 | not-accessible | current | |
| rlSourceGuardPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.6.1.1 | not-accessible | current | |
| rlSourceGuardPolicyName OBJECT-TYPE The Source Guard policy name. | 1.3.6.1.4.1.9.6.1.101.215.6.1.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlSourceGuardPolicyTrusted OBJECT-TYPE Indicates whether policy defines trusted functionality | 1.3.6.1.4.1.9.6.1.101.215.6.1.1.2 | RlIpv6FhsSettingStatusType | read-write | current |
| rlSourceGuardPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.6.1.1.3 | RowStatus | read-create | current |
| rlSourceGuardPortPolicyTable OBJECT-TYPE The table specifies Source Guard policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.6.2 | not-accessible | current | |
| rlSourceGuardPortPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.6.2.1 | not-accessible | current | |
| rlSourceGuardPortPolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.6.2.1.1 | InterfaceIndex | not-accessible | current |
| rlSourceGuardPortPolicyName OBJECT-TYPE The Source guard policy name | 1.3.6.1.4.1.9.6.1.101.215.6.2.1.2 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlSourceGuardPortPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.6.2.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardPortPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.6.2.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardPortPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.6.2.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardPortPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.6.2.1.6 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardPortPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.6.2.1.7 | RowStatus | read-create | current |
| rlSourceGuardPolicyPortTable OBJECT-TYPE The table specifies Source guard policy attachment for ports. | 1.3.6.1.4.1.9.6.1.101.215.6.3 | not-accessible | current | |
| rlSourceGuardPolicyPortEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.6.3.1 | not-accessible | current | |
| rlSourceGuardPolicyPortName OBJECT-TYPE The Source guard policy name | 1.3.6.1.4.1.9.6.1.101.215.6.3.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlSourceGuardPolicyPortIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.6.3.1.2 | InterfaceIndex | not-accessible | current |
| rlSourceGuardPolicyPortVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.6.3.1.3 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlSourceGuardPolicyPortVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.6.3.1.4 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlSourceGuardPolicyPortVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.6.3.1.5 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlSourceGuardPolicyPortVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.6.3.1.6 | OCTET STRING (SIZE(0..128)) | read-only | current |
| rlSourceGuardVlanPolicyTable OBJECT-TYPE The table specifies Source Guard policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.6.4 | not-accessible | current | |
| rlSourceGuardVlanPolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.6.4.1 | not-accessible | current | |
| rlSourceGuardVlanPolicyVlanTag OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.6.4.1.1 | VlanId | not-accessible | current |
| rlSourceGuardVlanPolicyName OBJECT-TYPE The Source guard policy name | 1.3.6.1.4.1.9.6.1.101.215.6.4.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| rlSourceGuardVlanPolicyRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.215.6.4.1.3 | RowStatus | read-create | current |
| rlSourceGuardPolicyVlanTable OBJECT-TYPE The table specifies Source Guard policy attachment for vlans. | 1.3.6.1.4.1.9.6.1.101.215.6.5 | not-accessible | current | |
| rlSourceGuardPolicyVlanEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.6.5.1 | not-accessible | current | |
| rlSourceGuardPolicyVlanPolicyName OBJECT-TYPE The Source guard policy name | 1.3.6.1.4.1.9.6.1.101.215.6.5.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| rlSourceGuardPolicyVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.6.5.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardPolicyVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.6.5.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardPolicyVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.6.5.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardPolicyVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.6.5.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardEnableVlanTable OBJECT-TYPE A table contains only one entry of a static vlan list. The Source Guard enabled VLANs are set to 1s. | 1.3.6.1.4.1.9.6.1.101.215.6.6 | not-accessible | current | |
| rlSourceGuardEnableVlanEntry OBJECT-TYPE Statically created by local or network management vlan list | 1.3.6.1.4.1.9.6.1.101.215.6.6.1 | not-accessible | current | |
| rlSourceGuardEnableVlanIndex OBJECT-TYPE The table contains only one static entry. | 1.3.6.1.4.1.9.6.1.101.215.6.6.1.1 | INTEGER {static(1)} | not-accessible | current |
| rlSourceGuardEnableVlan1to1024 OBJECT-TYPE A list of vlans from 1 to 1024. | 1.3.6.1.4.1.9.6.1.101.215.6.6.1.2 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardEnableVlan1025to2048 OBJECT-TYPE A list of vlans from 1025 to 2048. | 1.3.6.1.4.1.9.6.1.101.215.6.6.1.3 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardEnableVlan2049to3072 OBJECT-TYPE A list of vlans from 2049 to 3072. | 1.3.6.1.4.1.9.6.1.101.215.6.6.1.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardEnableVlan3073to4094 OBJECT-TYPE A list of vlans from 3073 to 4094. | 1.3.6.1.4.1.9.6.1.101.215.6.6.1.5 | OCTET STRING (SIZE(0..128)) | read-write | current |
| rlSourceGuardActivePolicyTable OBJECT-TYPE The table specifies Source Guard Active Policy per port and VLAN. | 1.3.6.1.4.1.9.6.1.101.215.6.7 | not-accessible | current | |
| rlSourceGuardActivePolicyEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.215.6.7.1 | not-accessible | current | |
| rlSourceGuardActivePolicyIfIndex OBJECT-TYPE The port's interface index. | 1.3.6.1.4.1.9.6.1.101.215.6.7.1.1 | InterfaceIndex | not-accessible | current |
| rlSourceGuardActivePolicyVlanTag OBJECT-TYPE The VLAN identifier. | 1.3.6.1.4.1.9.6.1.101.215.6.7.1.2 | VlanId | not-accessible | current |
| rlSourceGuardActivePolicyNamePort OBJECT-TYPE The Source guard policy name attached to given interface. | 1.3.6.1.4.1.9.6.1.101.215.6.7.1.3 | DisplayString (SIZE(1..32)) | read-only | current |
| rlSourceGuardActivePolicyNameVlan OBJECT-TYPE The Source Guard policy name attached to given vlan. | 1.3.6.1.4.1.9.6.1.101.215.6.7.1.4 | DisplayString (SIZE(0..32)) | read-only | current |
| rlSourceGuardActivePolicyTrusted OBJECT-TYPE Indicates whether policy defines trusted functionality | 1.3.6.1.4.1.9.6.1.101.215.6.7.1.5 | RlIpv6FhsSettingStatusType | read-only | current |
| rlSourceGuardActivePolicyTrustedType OBJECT-TYPE rlSourceGuardActivePolicyNamePort setting type. | 1.3.6.1.4.1.9.6.1.101.215.6.7.1.6 | RlIpv6FhsSettingType | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| rlNdInspectionMessageDropTrap NOTIFICATION-TYPE Warning trap indicating that IPv6 ND Inspection has dropped a message. | 1.3.6.1.4.1.9.6.1.101.0.228 | current |
| rlRaGuardMessageDropTrap NOTIFICATION-TYPE Warning trap indicating that IPv6 Ra Guard has dropped a message. | 1.3.6.1.4.1.9.6.1.101.0.229 | current |
| rlNbrBindingIntegrityEntryAddedTrap NOTIFICATION-TYPE Information trap indicating that new binding entry was added to Neighbor Binding Table. | 1.3.6.1.4.1.9.6.1.101.0.230 | current |
| rlNbrBindingIntegrityEntryStateChangeTrap NOTIFICATION-TYPE Information trap indicating that binding entry state was changed. | 1.3.6.1.4.1.9.6.1.101.0.231 | current |
| rlNbrBindingIntegrityEntryAnchorChangeTrap NOTIFICATION-TYPE Information trap indicating that binding entry anchor was changed. | 1.3.6.1.4.1.9.6.1.101.0.232 | current |
| rlNbrBindingIntegrityEntryDeletedTrap NOTIFICATION-TYPE Information trap indicating that binding entry was deleted. | 1.3.6.1.4.1.9.6.1.101.0.233 | current |
| rlNbrBindingIntegrityEntryLimitReachTrap NOTIFICATION-TYPE Warning trap indicating that a new entry was not inserted into Neighbor Binding table because of maximum limit has been reached. | 1.3.6.1.4.1.9.6.1.101.0.234 | current |
| rlNbrBindingIntegrityOverflowTrap NOTIFICATION-TYPE Warning trap indicating that a new entry was not inserted into Neighbor Binding table because of the Neighbor Binding table overflow. | 1.3.6.1.4.1.9.6.1.101.0.235 | current |
| rlDhcpGuardMessageDropTrap NOTIFICATION-TYPE Warning trap indicating that IPv6 DHCP Guard has dropped a message. | 1.3.6.1.4.1.9.6.1.101.0.236 | current |
| rlSrcGuardMessageDropTrap NOTIFICATION-TYPE Warning trap indicating that IPv6 Source Guard has dropped a message. | 1.3.6.1.4.1.9.6.1.101.0.237 | current |
| rlSrcGuardTCAMOverflowTrap NOTIFICATION-TYPE Warning trap indicating that a new Source Guard entry was not inserted into TCAM because of the lack of resources. | 1.3.6.1.4.1.9.6.1.101.0.238 | current |
| rlNbrBindingIntegrityPrefixOverflowTrap NOTIFICATION-TYPE Warning trap indicating that a new entry was not inserted into Neighbor Prefix table because of the Neighbor Prefix table overflow. | 1.3.6.1.4.1.9.6.1.101.0.239 | current |