MIBs Depot

BTI-OL-MIB

Registered at
1.3.6.1.4.1.18070.1.6
1.3.6.1.4.1.18070.2.2.1.16.11
1.3.6.1.4.1.18070.2.2.1.16.12
1.3.6.1.4.1.18070.2.2.2.1.33.1
1.3.6.1.4.1.18070.2.2.2.1.33.2
1.3.6.1.4.1.18070.2.2.2.1.33.3
1.3.6.1.4.1.18070.2.2.2.1.33.4
1.3.6.1.4.1.18070.2.2.2.2.28.1
1.3.6.1.4.1.18070.2.2.2.2.28.2
1.3.6.1.4.1.18070.2.2.2.2.28.3
1.3.6.1.4.1.18070.2.2.2.2.28.4
Last updated
2012-08-17 12:00
Organization
BTI Systems Inc.
Revisions
2012-08-17 12:00, 2012-02-10 12:00, 2011-09-26 12:00
Namespace
bti
Source file
BTI-OL-MIB
Digest
sha256:41987eb815718e333f5150c093466c0bfe09264d46e65137901a6343eba983aa

Description

The external MIB definitions for the managenent of the BTI Dynamic Optical Layer components including DLA-series amplifiers and ROB-series ROADM modules.

Contact

Technical Support BTI Systems Inc. 50 Northside Road Ottawa, Ontario, Canada K2H 5Z6 (613) 248-9154 support@btisystems.com

Imports

FromSymbols
BTI-7000-MIBcondCodeType, condDateAndTime, condDescription, condObjectType, condReportType, condServiceAffecting, condSeverity, evtCodeType, evtDateAndTime, evtDescription, evtObjectType, olCondNotifications, olEvtNotifications, opticalLayer, tcaDateAndTime, tcaIntervalType, tcaMontype, tcaThreshold, tcaValue, trapSeqNum
BTI-MIBbtiModules
BTI-TC-MIBAdminStatus, BERType, CpType, FiberType, FixedX10, FixedX100, HoursAndMinutes, InitializeCmd, OperStatQlfr, OperStatus, PMIntervalType, PMValidity
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BTI-7000-MIB
BTI-MIB
BTI-OL-MIB
BTI-TC-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
OlGroupType
TEXTUAL-CONVENTION
Identifies the configuration type of an optical layer grouping.
current
OlPortType
TEXTUAL-CONVENTION
Identifies the type of managed optical interface port on an optical layer module.
current

Objects

NameOIDSyntaxAccessStatus
olGroupTable
OBJECT-TYPE
This table lists all provisioned optical layer module groupings on the node.
1.3.6.1.4.1.18070.2.2.1.16.1not-accessiblecurrent
olGroupEntry
OBJECT-TYPE
The conceptual row object of the optical layer group table.
1.3.6.1.4.1.18070.2.2.1.16.1.1not-accessiblecurrent
olGroupIdx
OBJECT-TYPE
A number which uniquely identifies the optical layer group within the node.
1.3.6.1.4.1.18070.2.2.1.16.1.1.1INTEGER (1..255)not-accessiblecurrent
olGroupType
OBJECT-TYPE
The optical layer group configuration type. This is a mandatory object that must be specified when a row of the table is created. The value of none is not applicable for this object.
1.3.6.1.4.1.18070.2.2.1.16.1.1.2OlGroupTyperead-createcurrent
olGroupId
OBJECT-TYPE
Textual data recorded by the user to briefly identify the provisioned optical layer group in a manner useful to the user.
1.3.6.1.4.1.18070.2.2.1.16.1.1.3DisplayString (SIZE(0..32))read-createcurrent
olGroupCustom1
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.1.1.4DisplayStringread-createcurrent
olGroupCustom2
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.1.1.5DisplayStringread-createcurrent
olGroupCustom3
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.1.1.6DisplayStringread-createcurrent
olGroupRowStatus
OBJECT-TYPE
Used to control the addition and deletion of entries in the optical layer group table.
1.3.6.1.4.1.18070.2.2.1.16.1.1.100RowStatusread-createcurrent
olEqptTable
OBJECT-TYPE
This table lists all provisioned equipment modules that are assigned to an optical layer grouping.
1.3.6.1.4.1.18070.2.2.1.16.3not-accessiblecurrent
olEqptEntry
OBJECT-TYPE
The conceptual row object of the optical layer equipment table.
1.3.6.1.4.1.18070.2.2.1.16.3.1not-accessiblecurrent
olEqptCpTypeIdx
OBJECT-TYPE
The type of circuit pack of the equipment module that is assigned to the optical layer group.
1.3.6.1.4.1.18070.2.2.1.16.3.1.1CpTypenot-accessiblecurrent
olEqptShelfIdx
OBJECT-TYPE
The number of the shelf of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in a shelf (40-channel Mux/Demux), the value of this object is 0.
1.3.6.1.4.1.18070.2.2.1.16.3.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
olEqptSlotIdx
OBJECT-TYPE
The number of the slot of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in an active shelf slot (ex. 40-channel Mux/Demux), this object represents the module index among modules attributed to shelf 0.
1.3.6.1.4.1.18070.2.2.1.16.3.1.3INTEGER (1..255)not-accessiblecurrent
olEqptGroupNum
OBJECT-TYPE
The optical layer group to which the equipment modules is assigned.
1.3.6.1.4.1.18070.2.2.1.16.3.1.4INTEGER (1..255)read-createcurrent
olEqptDegreeNum
OBJECT-TYPE
The optical layer group degree to which the equipment module is assigned.
1.3.6.1.4.1.18070.2.2.1.16.3.1.5INTEGER (1..4)read-createcurrent
olEqptRowStatus
OBJECT-TYPE
Used to control the addition and deletion of entries in the optical layer equipment table, which in turn, controls the assigning and unassigning of equipment modules to/from an optical layer grouping.
1.3.6.1.4.1.18070.2.2.1.16.3.1.100RowStatusread-createcurrent
olPortTable
OBJECT-TYPE
This table lists all managed ports on equipment modules assigned to optical layer groupings.
1.3.6.1.4.1.18070.2.2.1.16.4not-accessiblecurrent
olPortEntry
OBJECT-TYPE
The conceptual row object of the optical layer port table.
1.3.6.1.4.1.18070.2.2.1.16.4.1not-accessiblecurrent
olPortCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the optical layer port is located.
1.3.6.1.4.1.18070.2.2.1.16.4.1.1CpTypenot-accessiblecurrent
olPortShelfIdx
OBJECT-TYPE
The number of the shelf on which the optical layer port is located.
1.3.6.1.4.1.18070.2.2.1.16.4.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
olPortSlotIdx
OBJECT-TYPE
The number of the slot on which the optical layer port is located.
1.3.6.1.4.1.18070.2.2.1.16.4.1.3INTEGER (1..255)not-accessiblecurrent
olPortTypeIdx
OBJECT-TYPE
The type of optical layer port according to the function it provides.
1.3.6.1.4.1.18070.2.2.1.16.4.1.4OlPortTypenot-accessiblecurrent
olPortIdx
OBJECT-TYPE
The number of the optical layer port of the specified port type.
1.3.6.1.4.1.18070.2.2.1.16.4.1.5INTEGER (1..600)not-accessiblecurrent
olPortId
OBJECT-TYPE
Textual data recorded by the user to briefly identify the provisioned optical layer port in a manner useful to the user.
1.3.6.1.4.1.18070.2.2.1.16.4.1.6DisplayString (SIZE(0..32))read-createcurrent
olPortCustom1
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.4.1.7DisplayStringread-createcurrent
olPortCustom2
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.4.1.8DisplayStringread-createcurrent
olPortCustom3
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.4.1.9DisplayStringread-createcurrent
olPortDWDMType
OBJECT-TYPE
Used to configure the port for the type of DWDM composite to which it is inter-connection. By default, all ports are inter-connected with native optical layer DWDM composites. For some configurations, client port 2 of ROB2 pack and ROB4 modules may be configured for alien DWDM type.
1.3.6.1.4.1.18070.2.2.1.16.4.1.10INTEGER {native(1), alien(2)}read-createcurrent
olPortGrid
OBJECT-TYPE
The DWDM grid spacing on the port.
1.3.6.1.4.1.18070.2.2.1.16.4.1.11INTEGER {ghz100(1), ghz50(2)}read-writecurrent
olPortWavelength
OBJECT-TYPE
The wavelength of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.
1.3.6.1.4.1.18070.2.2.1.16.4.1.12FixedX100read-onlycurrent
olPortFrequency
OBJECT-TYPE
The frequency of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.
1.3.6.1.4.1.18070.2.2.1.16.4.1.13FixedX100read-onlycurrent
olPortOperStatus
OBJECT-TYPE
The reported operational status of the optical layer port.
1.3.6.1.4.1.18070.2.2.1.16.4.1.14OperStatusread-onlycurrent
olPortOperStatQlfr
OBJECT-TYPE
This is a textual list of qualifiers about the reported operational status of the optical layer port.
1.3.6.1.4.1.18070.2.2.1.16.4.1.15OperStatQlfrread-onlycurrent
olPortRemoteId
OBJECT-TYPE
Identifies the remote node and port to which the optical layer port is connected, in the format prescribed by the PSM network management system.
1.3.6.1.4.1.18070.2.2.1.16.4.1.16DisplayStringread-createcurrent
olPortExpCnxDegree
OBJECT-TYPE
The expected degree number of the equipment that is inter-connected on the port.
1.3.6.1.4.1.18070.2.2.1.16.4.1.17INTEGER (2..4)accessible-for-notifycurrent
olPortActCnxDegree
OBJECT-TYPE
The actual degree number of the equipment that is inter-connected on the port.
1.3.6.1.4.1.18070.2.2.1.16.4.1.18INTEGER (2..4)accessible-for-notifycurrent
olPortRowStatus
OBJECT-TYPE
Used to control the addition and deletion of entries in the Optical Layer Port table. Manual creation and deletion is supported only for the client 2 port on ROB packs assigned to a Channel-equalizing Terminal or Reconfigurable Add/Drop node group.
1.3.6.1.4.1.18070.2.2.1.16.4.1.100RowStatusread-createcurrent
eqptConnTable
OBJECT-TYPE
This table lists all intra-group optical fiber patch connections between ports on equipment modules assigned to optical layer groupings.
1.3.6.1.4.1.18070.2.2.1.16.5not-accessiblecurrent
eqptConnEntry
OBJECT-TYPE
The conceptual row object of the equipment connection table.
1.3.6.1.4.1.18070.2.2.1.16.5.1not-accessiblecurrent
eqptConnSrcCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the source port of the equipment connection is located.
1.3.6.1.4.1.18070.2.2.1.16.5.1.1CpTypenot-accessiblecurrent
eqptConnSrcShelfIdx
OBJECT-TYPE
The number of the shelf on which the source port of the equipment connection is located.
1.3.6.1.4.1.18070.2.2.1.16.5.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
eqptConnSrcSlotIdx
OBJECT-TYPE
The number of the slot on which the source port of the equipment connection is located.
1.3.6.1.4.1.18070.2.2.1.16.5.1.3INTEGER (1..255)not-accessiblecurrent
eqptConnSrcPortTypeIdx
OBJECT-TYPE
The type of the source port of the equipment connection, according to the function it provides.
1.3.6.1.4.1.18070.2.2.1.16.5.1.4OlPortTypenot-accessiblecurrent
eqptConnSrcIdx
OBJECT-TYPE
The number of the port of the specified port type of the source port of the equipment connection.
1.3.6.1.4.1.18070.2.2.1.16.5.1.5INTEGER (1..600)not-accessiblecurrent
eqptConnDstCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the destination port of the equipment connection is located.
1.3.6.1.4.1.18070.2.2.1.16.5.1.6CpTypenot-accessiblecurrent
eqptConnDstShelfIdx
OBJECT-TYPE
The number of the shelf on which the destination port of the equipment connection is located.
1.3.6.1.4.1.18070.2.2.1.16.5.1.7INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
eqptConnDstSlotIdx
OBJECT-TYPE
The number of the slot on which the destination port of the equipment connection is located.
1.3.6.1.4.1.18070.2.2.1.16.5.1.8INTEGER (1..255)not-accessiblecurrent
eqptConnDstPortTypeIdx
OBJECT-TYPE
The type of the destination port of the equipment connection, according to the function it provides.
1.3.6.1.4.1.18070.2.2.1.16.5.1.9OlPortTypenot-accessiblecurrent
eqptConnDstIdx
OBJECT-TYPE
The number of the port of the specified port type of the destination port of the equipment connection.
1.3.6.1.4.1.18070.2.2.1.16.5.1.10INTEGER (1..600)not-accessiblecurrent
eqptConnType
OBJECT-TYPE
The type of optical fiber patch cable for the equipment connection entry.
1.3.6.1.4.1.18070.2.2.1.16.5.1.11INTEGER {duplex(1), loopback(2)}read-onlycurrent
eqptConnRowStatus
OBJECT-TYPE
The equipment connection table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted as equipment modules are assigned and unassigned to optical layer groupings. This equipment connection row status object is used only in database change notifications to indicate if the row has been created or deleted.
1.3.6.1.4.1.18070.2.2.1.16.5.1.100RowStatusaccessible-for-notifycurrent
olOSCTable
OBJECT-TYPE
This table lists all OSC managed objects that have been created on the optical layer equipment modules.
1.3.6.1.4.1.18070.2.2.1.16.6not-accessiblecurrent
olOSCEntry
OBJECT-TYPE
The conceptual row object of the optical laye OSC table.
1.3.6.1.4.1.18070.2.2.1.16.6.1not-accessiblecurrent
olOSCCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the OSC is located.
1.3.6.1.4.1.18070.2.2.1.16.6.1.1CpTypenot-accessiblecurrent
olOSCShelfIdx
OBJECT-TYPE
The number of the shelf in which the OSC is located.
1.3.6.1.4.1.18070.2.2.1.16.6.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
olOSCSlotIdx
OBJECT-TYPE
The number of the slot in which the OSC is located.
1.3.6.1.4.1.18070.2.2.1.16.6.1.3INTEGER (1..20)not-accessiblecurrent
olOSCLineIdx
OBJECT-TYPE
The line number of the OSC.
1.3.6.1.4.1.18070.2.2.1.16.6.1.4INTEGER (1)not-accessiblecurrent
olOSCAdminStatus
OBJECT-TYPE
The administrative status of the OSC. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
1.3.6.1.4.1.18070.2.2.1.16.6.1.5AdminStatusread-writecurrent
olOSCOperStatus
OBJECT-TYPE
The reported operational status of the OSC.
1.3.6.1.4.1.18070.2.2.1.16.6.1.6OperStatusread-onlycurrent
olOSCOperStatQlfr
OBJECT-TYPE
This is a textual list of qualifiers about the reported operational status of the OSC.
1.3.6.1.4.1.18070.2.2.1.16.6.1.7OperStatQlfrread-onlycurrent
olOSCAutoEnableTimer
OBJECT-TYPE
Specifies the auto-enable timer for the targeted OSC. This value only applies if the olOSCAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
1.3.6.1.4.1.18070.2.2.1.16.6.1.8HoursAndMinutesread-writecurrent
olOSCActAutoEnableTimer
OBJECT-TYPE
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
1.3.6.1.4.1.18070.2.2.1.16.6.1.9HoursAndMinutesread-onlycurrent
olOSCId
OBJECT-TYPE
Textual data recorded by the user to briefly identify the OSC object in a manner useful to the user.
1.3.6.1.4.1.18070.2.2.1.16.6.1.10DisplayString (SIZE(0..32))read-writecurrent
olOSCCustom1
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.6.1.11DisplayStringread-writecurrent
olOSCCustom2
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.6.1.12DisplayStringread-writecurrent
olOSCCustom3
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.6.1.13DisplayStringread-writecurrent
olOSCFEIMMon
OBJECT-TYPE
This object is used to control the monitoring of the Far End Node Mismatch Identifier condition. When enabled, the received far-end node identification attributes will be monitored and compared to the expected far-end node identification attribites, and a condition is raised if attributes do no match.
1.3.6.1.4.1.18070.2.2.1.16.6.1.14INTEGER {enabled(1), disabled(2)}read-writecurrent
olOSCExpFESysName
OBJECT-TYPE
The expected far-end node system identifier.
1.3.6.1.4.1.18070.2.2.1.16.6.1.15DisplayString (SIZE(0..20))read-writecurrent
olOSCExpFEIPAddr
OBJECT-TYPE
The expected far-end node IP address.
1.3.6.1.4.1.18070.2.2.1.16.6.1.16IpAddressread-writecurrent
olOSCExpFEGrp
OBJECT-TYPE
The expected far-end node optical layer group number.
1.3.6.1.4.1.18070.2.2.1.16.6.1.17INTEGER (0..255)read-writecurrent
olOSCExpFEDegr
OBJECT-TYPE
The expected far-end node optical layer degree number.
1.3.6.1.4.1.18070.2.2.1.16.6.1.18INTEGER (0..4)read-writecurrent
olOSCFESysName
OBJECT-TYPE
The actual far-end node system identifier.
1.3.6.1.4.1.18070.2.2.1.16.6.1.19DisplayString (SIZE(0..20))read-onlycurrent
olOSCFEIPAddr
OBJECT-TYPE
The actual far-end node IP address.
1.3.6.1.4.1.18070.2.2.1.16.6.1.20IpAddressread-onlycurrent
olOSCFEGrp
OBJECT-TYPE
The actual far-end node optical layer group number.
1.3.6.1.4.1.18070.2.2.1.16.6.1.21INTEGER (0..255)read-onlycurrent
olOSCFEDegr
OBJECT-TYPE
The actual far-end node optical layer degree number.
1.3.6.1.4.1.18070.2.2.1.16.6.1.22INTEGER (0..4)read-onlycurrent
olOSCFEGrpType
OBJECT-TYPE
The actual far-end node optical layer group configuration type.
1.3.6.1.4.1.18070.2.2.1.16.6.1.23OlGroupTyperead-onlycurrent
olOSCRowStatus
OBJECT-TYPE
The Optical Layer OSC table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB equipment is provisioned. This optical layer OSC row status object is used only in database change notifications to indicate if the row has been created or deleted.
1.3.6.1.4.1.18070.2.2.1.16.6.1.100RowStatusaccessible-for-notifycurrent
odccTable
OBJECT-TYPE
This table lists all provisioned ODCC objects on equipment modules assigned to optical layer groupings.
1.3.6.1.4.1.18070.2.2.1.16.7not-accessiblecurrent
odccEntry
OBJECT-TYPE
The conceptual row object of the ODCC table.
1.3.6.1.4.1.18070.2.2.1.16.7.1not-accessiblecurrent
odccCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the ODCC is located.
1.3.6.1.4.1.18070.2.2.1.16.7.1.1CpTypenot-accessiblecurrent
odccShelfIdx
OBJECT-TYPE
The number of the shelf in which the ODCC is located.
1.3.6.1.4.1.18070.2.2.1.16.7.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
odccSlotIdx
OBJECT-TYPE
The number of the slot in which the ODC is located.
1.3.6.1.4.1.18070.2.2.1.16.7.1.3INTEGER (1..20)not-accessiblecurrent
odccLineIdx
OBJECT-TYPE
The line number of the ODCC.
1.3.6.1.4.1.18070.2.2.1.16.7.1.4INTEGER (1)not-accessiblecurrent
odccAdminStatus
OBJECT-TYPE
The administrative status of the ODCC. The default value is disabled if the supporting ODC is disabled, otherwise it is enabled.
1.3.6.1.4.1.18070.2.2.1.16.7.1.5AdminStatusread-createcurrent
odccRowStatus
OBJECT-TYPE
Used to control the addition and deletion of entries in the ODCC table, which in turn controls the provisioning and de-provisioning of ODCC objects.
1.3.6.1.4.1.18070.2.2.1.16.7.1.100RowStatusread-createcurrent
wdmTable
OBJECT-TYPE
This table lists all WDM managed objects that have been created on optical layer equipment.
1.3.6.1.4.1.18070.2.2.1.16.8not-accessiblecurrent
wdmEntry
OBJECT-TYPE
The conceptual row object of the WDM table.
1.3.6.1.4.1.18070.2.2.1.16.8.1not-accessiblecurrent
wdmCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the WDM is located.
1.3.6.1.4.1.18070.2.2.1.16.8.1.1CpTypenot-accessiblecurrent
wdmShelfIdx
OBJECT-TYPE
The number of the shelf in which the WDM is located.
1.3.6.1.4.1.18070.2.2.1.16.8.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
wdmSlotIdx
OBJECT-TYPE
The number of the slot in which the WDM is located.
1.3.6.1.4.1.18070.2.2.1.16.8.1.3INTEGER (1..20)not-accessiblecurrent
wdmLineIdx
OBJECT-TYPE
The line number of the WDM.
1.3.6.1.4.1.18070.2.2.1.16.8.1.4INTEGER (1)not-accessiblecurrent
wdmAdminStatus
OBJECT-TYPE
The administrative status of the WDM. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
1.3.6.1.4.1.18070.2.2.1.16.8.1.5AdminStatusread-writecurrent
wdmOperStatus
OBJECT-TYPE
The reported operational status of the WDM.
1.3.6.1.4.1.18070.2.2.1.16.8.1.6OperStatusread-onlycurrent
wdmOperStatQlfr
OBJECT-TYPE
This is a textual list of qualifiers about the reported operational status of the WDM.
1.3.6.1.4.1.18070.2.2.1.16.8.1.7OperStatQlfrread-onlycurrent
wdmAutoEnableTimer
OBJECT-TYPE
Specifies the auto-enable timer for the targeted WDM. This value only applies if the wdmAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
1.3.6.1.4.1.18070.2.2.1.16.8.1.8HoursAndMinutesread-writecurrent
wdmActAutoEnableTimer
OBJECT-TYPE
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
1.3.6.1.4.1.18070.2.2.1.16.8.1.9HoursAndMinutesread-onlycurrent
wdmId
OBJECT-TYPE
Textual data recorded by the user to briefly identify the WDM object in a manner useful to the user.
1.3.6.1.4.1.18070.2.2.1.16.8.1.10DisplayString (SIZE(0..32))read-writecurrent
wdmCustom1
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.8.1.11DisplayStringread-writecurrent
wdmCustom2
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.8.1.12DisplayStringread-writecurrent
wdmCustom3
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.8.1.13DisplayStringread-writecurrent
wdmFiberType
OBJECT-TYPE
The fiber type of the span fiber.
1.3.6.1.4.1.18070.2.2.1.16.8.1.14INTEGER {smf(1)}read-writecurrent
wdmSpanLength
OBJECT-TYPE
The measured length of the receive span fiber.
1.3.6.1.4.1.18070.2.2.1.16.8.1.15Unsigned32read-onlycurrent
wdmSpanLossRxHighTh
OBJECT-TYPE
The high threshold setting for the loss on the receive fiber of the Line span. The setting for this object is used to evaluate the olPortLossRxHighThCond trap. When the value of this object is set to 0, the olPortLossRxHighThCond trap is disabled.
1.3.6.1.4.1.18070.2.2.1.16.8.1.16FixedX10read-writecurrent
wdmSpanLossSpecMax
OBJECT-TYPE
The specified maximum supported loss on the Line span. The value of this object is dependent on the optical layer group configurations of the local and far-end nodes.
1.3.6.1.4.1.18070.2.2.1.16.8.1.17FixedX10read-onlycurrent
wdmNumChannels
OBJECT-TYPE
The actual number of channels that the WDM is currently provisioned to carry.
1.3.6.1.4.1.18070.2.2.1.16.8.1.18INTEGER (0..44)read-onlycurrent
wdmRowStatus
OBJECT-TYPE
The WDM table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB circuit pack is assigned and unassigned to an optical layer grouping. This WDM row status object is used only in database change notifications to indicate if the row has been created or deleted.
1.3.6.1.4.1.18070.2.2.1.16.8.1.100RowStatusaccessible-for-notifycurrent
wchXCTable
OBJECT-TYPE
This table lists all configured wavelength channel cross-connections configured on optical layer equipment.
1.3.6.1.4.1.18070.2.2.1.16.9not-accessiblecurrent
wchXCEntry
OBJECT-TYPE
The conceptual row object of the wavelength channel cross-connection table.
1.3.6.1.4.1.18070.2.2.1.16.9.1not-accessiblecurrent
wchXCSrcCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the source wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.1CpTypenot-accessiblecurrent
wchXCSrcShelfIdx
OBJECT-TYPE
The number of the shelf on which the source wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.2INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
wchXCSrcSlotIdx
OBJECT-TYPE
The number of the slot on which the source wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.3INTEGER (1..255)not-accessiblecurrent
wchXCSrcPortTypeIdx
OBJECT-TYPE
The type of port on which the source wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.4OlPortTypenot-accessiblecurrent
wchXCSrcPortIdx
OBJECT-TYPE
The number of the port on which the source wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.5INTEGER (1..600)not-accessiblecurrent
wchXCSrcChannelIdx
OBJECT-TYPE
The channel number of the source wavelength channel of the cross-connection.
1.3.6.1.4.1.18070.2.2.1.16.9.1.6INTEGER (135..610)not-accessiblecurrent
wchXCDstCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the destination wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.7CpTypenot-accessiblecurrent
wchXCDstShelfIdx
OBJECT-TYPE
The number of the shelf on which the destination wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.8INTEGER (0 | 1 | 11 | 21 | 31)not-accessiblecurrent
wchXCDstSlotIdx
OBJECT-TYPE
The number of the slot on which the destination wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.9INTEGER (1..255)not-accessiblecurrent
wchXCDstPortTypeIdx
OBJECT-TYPE
The type of port on which the destination wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.10OlPortTypenot-accessiblecurrent
wchXCDstPortIdx
OBJECT-TYPE
The number of the port on which the destination wavelength channel of the cross-connection is located.
1.3.6.1.4.1.18070.2.2.1.16.9.1.11INTEGER (1..600)not-accessiblecurrent
wchXCDstChannelIdx
OBJECT-TYPE
The channel number of the destination wavelength channel of the cross-connection.
1.3.6.1.4.1.18070.2.2.1.16.9.1.12INTEGER (135..610)not-accessiblecurrent
wchXCServiceName
OBJECT-TYPE
Name of end-to-end wavelength service of which this cross- connection is a part.
1.3.6.1.4.1.18070.2.2.1.16.9.1.13DisplayString (SIZE(0..32))read-createcurrent
wchXCRowStatus
OBJECT-TYPE
Used to control the addition and deletion of entries in the wavelength channel cross-connection table.
1.3.6.1.4.1.18070.2.2.1.16.9.1.100RowStatusread-createcurrent
wchTable
OBJECT-TYPE
This table lists all managed wavelength channels on equipment modules assigned to optical layer groupings.
1.3.6.1.4.1.18070.2.2.1.16.10not-accessiblecurrent
wchEntry
OBJECT-TYPE
The conceptual row object of the wavelength channel table.
1.3.6.1.4.1.18070.2.2.1.16.10.1not-accessiblecurrent
wchCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the wavelength channel is located.
1.3.6.1.4.1.18070.2.2.1.16.10.1.1CpTypenot-accessiblecurrent
wchShelfIdx
OBJECT-TYPE
The number of the shelf on which the wavelength channel is located.
1.3.6.1.4.1.18070.2.2.1.16.10.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
wchSlotIdx
OBJECT-TYPE
The number of the slot on which the wavelength channel is located.
1.3.6.1.4.1.18070.2.2.1.16.10.1.3INTEGER (1..20)not-accessiblecurrent
wchPortTypeIdx
OBJECT-TYPE
The type of port on which the wavelength channel is located.
1.3.6.1.4.1.18070.2.2.1.16.10.1.4OlPortTypenot-accessiblecurrent
wchPortIdx
OBJECT-TYPE
The number of the port on which the wavelength channel is located.
1.3.6.1.4.1.18070.2.2.1.16.10.1.5INTEGER (1..4)not-accessiblecurrent
wchIdx
OBJECT-TYPE
The number of the targeted wavelength channel.
1.3.6.1.4.1.18070.2.2.1.16.10.1.6INTEGER (135..610)not-accessiblecurrent
wchAdminStatus
OBJECT-TYPE
The administrative status of the wavelength channel. The default value is autoEnabled if the supporting WDM is enabled or autoEnabled, otherwise it is disabled.
1.3.6.1.4.1.18070.2.2.1.16.10.1.7AdminStatusread-writecurrent
wchOperStatus
OBJECT-TYPE
The reported operational status of the wavelength channel.
1.3.6.1.4.1.18070.2.2.1.16.10.1.8OperStatusread-onlycurrent
wchOperStatQlfr
OBJECT-TYPE
This is a textual list of qualifiers about the reported operational status of the wavelength channel.
1.3.6.1.4.1.18070.2.2.1.16.10.1.9OperStatQlfrread-onlycurrent
wchAutoEnableTimer
OBJECT-TYPE
Specifies the auto-enable timer for the targeted wavelength channel. This value only applies if the wchAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
1.3.6.1.4.1.18070.2.2.1.16.10.1.10HoursAndMinutesread-writecurrent
wchActAutoEnableTimer
OBJECT-TYPE
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
1.3.6.1.4.1.18070.2.2.1.16.10.1.11HoursAndMinutesread-onlycurrent
wchId
OBJECT-TYPE
Textual data recorded by the user to briefly identify the wavelength channel object in a manner useful to the user.
1.3.6.1.4.1.18070.2.2.1.16.10.1.12DisplayString (SIZE(0..32))read-writecurrent
wchCustom1
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.10.1.13DisplayStringread-writecurrent
wchCustom2
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.10.1.14DisplayStringread-writecurrent
wchCustom3
OBJECT-TYPE
A variable length text string for operating company use.
1.3.6.1.4.1.18070.2.2.1.16.10.1.15DisplayStringread-writecurrent
wchBitrate
OBJECT-TYPE
The bitrate of the signal carried by the wavelength channel. A value of tenGig applies to all signal bitrates of 10Gb/sec or less.
1.3.6.1.4.1.18070.2.2.1.16.10.1.16INTEGER {tenGig(1)}read-writecurrent
wchGrid
OBJECT-TYPE
The minimum grid spacing with which the channel is compatible.
1.3.6.1.4.1.18070.2.2.1.16.10.1.17INTEGER {ghz100(1), ghz50(2)}read-writecurrent
wchWavelength
OBJECT-TYPE
The wavelength of the channel.
1.3.6.1.4.1.18070.2.2.1.16.10.1.18FixedX100read-onlycurrent
wchFrequency
OBJECT-TYPE
The frequency of the channel.
1.3.6.1.4.1.18070.2.2.1.16.10.1.19FixedX100read-onlycurrent
wchRowStatus
OBJECT-TYPE
The Wavelength Channel table RowStatus object is not readable or writeable because all entries in the Wavelength Channel table are automatically created and deleted when an wavelength channel cross-connection involving the wavelength channel is created or deleted. This Wavelength Channel row status object is used only in database change notifications to indicate if the row has been created or deleted.
1.3.6.1.4.1.18070.2.2.1.16.10.1.100RowStatusaccessible-for-notifycurrent
olGroupMerge
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.16.11
olGroupMergeCmd
OBJECT-TYPE
This object is used to invoke an optical layer group merge operation. The optical layer group merge is activated when this object is set to invoke(2). The values of the olGroupMergePrimary and olGroupMergeSecondary objects must be set in the same set request as this object. When a get is performed on this object, the value returned is idle(1).
1.3.6.1.4.1.18070.2.2.1.16.11.1INTEGER {idle(1), invoke(2)}read-writecurrent
olGroupMergePrimary
OBJECT-TYPE
The identifier of the primary optical layer group of the merge.
1.3.6.1.4.1.18070.2.2.1.16.11.2INTEGER (1..255)read-writecurrent
olGroupMergeSecondary
OBJECT-TYPE
The identifier of the secondary optical layer group of the merge.
1.3.6.1.4.1.18070.2.2.1.16.11.3INTEGER (1..255)read-writecurrent
olPerformance
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.1.16.12
olOSCCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for the optical layer OSC objects on the NE.
1.3.6.1.4.1.18070.2.2.1.16.12.1not-accessiblecurrent
olOSCCrntPMEntry
OBJECT-TYPE
The row entry object of the optical layer OSC current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer OSC object.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1not-accessiblecurrent
olOSCCrntPMCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the optical layer OSC targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.1CpTypenot-accessiblecurrent
olOSCCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf in which the optical layer OSC targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
olOSCCrntPMSlotIdx
OBJECT-TYPE
The number of the slot in which the optical layer OSC targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.3INTEGER (1..20)not-accessiblecurrent
olOSCCrntPMLineIdx
OBJECT-TYPE
The line number of the OSC targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.4INTEGER (1)not-accessiblecurrent
olOSCCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.5PMIntervalTypenot-accessiblecurrent
olOSCCrntPMOPRValue
OBJECT-TYPE
The OSC optical power received on the Line port.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.6FixedX10read-onlycurrent
olOSCCrntPMOPRTimeStamp
OBJECT-TYPE
The date and time stamp of the optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.7DateAndTimeread-onlycurrent
olOSCCrntPMOPRValidity
OBJECT-TYPE
Indicates the validity of the provided optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.8PMValidityread-onlycurrent
olOSCCrntPMOPTValue
OBJECT-TYPE
The OSC optical power transmitted at the output of the Line port.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.9FixedX10read-onlycurrent
olOSCCrntPMOPTTimeStamp
OBJECT-TYPE
The date and time stamp of the optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.10DateAndTimeread-onlycurrent
olOSCCrntPMOPTValidity
OBJECT-TYPE
Indicates the validity of the provided optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.11PMValidityread-onlycurrent
olOSCCrntPMOBRValue
OBJECT-TYPE
The OSC optical back-reflected power.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.12FixedX10read-onlycurrent
olOSCCrntPMOBRTimeStamp
OBJECT-TYPE
The date and time stamp of the optical back-reflected power value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.13DateAndTimeread-onlycurrent
olOSCCrntPMOBRValidity
OBJECT-TYPE
Indicates the validity of the provided optical back-reflected power value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.14PMValidityread-onlycurrent
olOSCCrntPMCVSValue
OBJECT-TYPE
The count of coding violations at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.15Unsigned32read-writecurrent
olOSCCrntPMCVSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer coding violations value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.16DateAndTimeread-onlycurrent
olOSCCrntPMCVSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer coding violations value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.17PMValidityread-onlycurrent
olOSCCrntPMCVSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCCrntPMCVSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.18InitializeCmdread-writecurrent
olOSCCrntPMESSValue
OBJECT-TYPE
The count of errored seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.19Unsigned32read-writecurrent
olOSCCrntPMESSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.20DateAndTimeread-onlycurrent
olOSCCrntPMESSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.21PMValidityread-onlycurrent
olOSCCrntPMESSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCCrntPMESSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.22InitializeCmdread-writecurrent
olOSCCrntPMSESSValue
OBJECT-TYPE
The count of severely errored seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.23Unsigned32read-writecurrent
olOSCCrntPMSESSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer severely errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.24DateAndTimeread-onlycurrent
olOSCCrntPMSESSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer severely errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.25PMValidityread-onlycurrent
olOSCCrntPMSESSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCCrntPMSESSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.26InitializeCmdread-writecurrent
olOSCCrntPMSEFSSValue
OBJECT-TYPE
The count of severely errored framing seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.27Unsigned32read-writecurrent
olOSCCrntPMSEFSSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer severely errored framing seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.28DateAndTimeread-onlycurrent
olOSCCrntPMSEFSSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer severely errored framing seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.29PMValidityread-onlycurrent
olOSCCrntPMSEFSSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCCrntPMSEFSSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.30InitializeCmdread-writecurrent
olOSCCrntPMUASSValue
OBJECT-TYPE
The count of unavailable seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.31Unsigned32read-writecurrent
olOSCCrntPMUASSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer unavailable seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.32DateAndTimeread-onlycurrent
olOSCCrntPMUASSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer unavailable seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.33PMValidityread-onlycurrent
olOSCCrntPMUASSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCCrntPMUASSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.1.1.34InitializeCmdread-writecurrent
olOSCHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for the optical layer OSC objects on the NE.
1.3.6.1.4.1.18070.2.2.1.16.12.2not-accessiblecurrent
olOSCHistPMEntry
OBJECT-TYPE
The row entry object of the optical layer OSC historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given optical layer OSC object.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1not-accessiblecurrent
olOSCHistPMCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the optical layer OSC targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.1CpTypenot-accessiblecurrent
olOSCHistPMShelfIdx
OBJECT-TYPE
The number of the shelf in which the optical layer OSC targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
olOSCHistPMSlotIdx
OBJECT-TYPE
The number of the slot in which the optical layer OSC targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.3INTEGER (1..20)not-accessiblecurrent
olOSCHistPMLineIdx
OBJECT-TYPE
The line number of the OSC targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.4INTEGER (1)not-accessiblecurrent
olOSCHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.5PMIntervalTypenot-accessiblecurrent
olOSCHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.6INTEGER (1..96)not-accessiblecurrent
olOSCHistPMOPRValue
OBJECT-TYPE
The OSC optical power received on the Line port.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.7FixedX10read-onlycurrent
olOSCHistPMOPRTimeStamp
OBJECT-TYPE
The date and time stamp of the optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.8DateAndTimeread-onlycurrent
olOSCHistPMOPRValidity
OBJECT-TYPE
Indicates the validity of the provided optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.9PMValidityread-onlycurrent
olOSCHistPMOPTValue
OBJECT-TYPE
The OSC optical power transmitted at the output of the Line port.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.10FixedX10read-onlycurrent
olOSCHistPMOPTTimeStamp
OBJECT-TYPE
The date and time stamp of the optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.11DateAndTimeread-onlycurrent
olOSCHistPMOPTValidity
OBJECT-TYPE
Indicates the validity of the provided optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.12PMValidityread-onlycurrent
olOSCHistPMOBRValue
OBJECT-TYPE
The OSC optical back-reflected power.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.13FixedX10read-onlycurrent
olOSCHistPMOBRTimeStamp
OBJECT-TYPE
The date and time stamp of the optical back-reflected power value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.14DateAndTimeread-onlycurrent
olOSCHistPMOBRValidity
OBJECT-TYPE
Indicates the validity of the provided optical back-reflected power value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.15PMValidityread-onlycurrent
olOSCHistPMCVSValue
OBJECT-TYPE
The count of coding violations at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.16Unsigned32read-writecurrent
olOSCHistPMCVSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer coding violations value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.17DateAndTimeread-onlycurrent
olOSCHistPMCVSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer coding violations value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.18PMValidityread-onlycurrent
olOSCHistPMCVSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCHistPMCVSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.19InitializeCmdread-writecurrent
olOSCHistPMESSValue
OBJECT-TYPE
The count of errored seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.20Unsigned32read-writecurrent
olOSCHistPMESSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.21DateAndTimeread-onlycurrent
olOSCHistPMESSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.22PMValidityread-onlycurrent
olOSCHistPMESSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCHistPMESSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.23InitializeCmdread-writecurrent
olOSCHistPMSESSValue
OBJECT-TYPE
The count of severely errored seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.24Unsigned32read-writecurrent
olOSCHistPMSESSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer severely errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.25DateAndTimeread-onlycurrent
olOSCHistPMSESSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer severely errored seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.26PMValidityread-onlycurrent
olOSCHistPMSESSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCHistPMSESSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.27InitializeCmdread-writecurrent
olOSCHistPMSEFSSValue
OBJECT-TYPE
The count of severely errored framing seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.28Unsigned32read-writecurrent
olOSCHistPMSEFSSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer severely errored framing seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.29DateAndTimeread-onlycurrent
olOSCHistPMSEFSSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer severely errored framing seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.30PMValidityread-onlycurrent
olOSCHistPMSEFSSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCHistPMSEFSSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.31InitializeCmdread-writecurrent
olOSCHistPMUASSValue
OBJECT-TYPE
The count of unavailable seconds at the section layer of the received OSC signal.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.32Unsigned32read-writecurrent
olOSCHistPMUASSTimeStamp
OBJECT-TYPE
The date and time stamp of the section layer unavailable seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.33DateAndTimeread-onlycurrent
olOSCHistPMUASSValidity
OBJECT-TYPE
Indicates the validity of the provided section layer unavailable seconds value.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.34PMValidityread-onlycurrent
olOSCHistPMUASSInitialize
OBJECT-TYPE
Used to initialize the value of the olOSCHistPMUASSValue object to 0.
1.3.6.1.4.1.18070.2.2.1.16.12.2.1.35InitializeCmdread-writecurrent
olOSCPMThresholdTable
OBJECT-TYPE
A table of threshold levels for performance monitoring counter values on Optical Layer OSC objects, that are used in the generation of threshold crossing alerts.
1.3.6.1.4.1.18070.2.2.1.16.12.3not-accessiblecurrent
olOSCPMThresholdEntry
OBJECT-TYPE
The row entry object of the optical layer OSC performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual optical layer OSC object.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1not-accessiblecurrent
olOSCPMThresholdCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the optical layer OSC targeted for PM thresholds is located.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.1CpTypenot-accessiblecurrent
olOSCPMThresholdShelfIdx
OBJECT-TYPE
The number of the shelf in which the optical layer OSC targeted for PM thresholds is located.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
olOSCPMThresholdSlotIdx
OBJECT-TYPE
The number of the slot in which the optical layer OSC targeted for PM thresholds is located.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.3INTEGER (1..20)not-accessiblecurrent
olOSCPMThresholdLineIdx
OBJECT-TYPE
The line number of the OSC targeted for PM thresholds.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.4INTEGER (1)not-accessiblecurrent
olOSCPMThresholdIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.5PMIntervalTypenot-accessiblecurrent
olOSCPMThresholdCVSValue
OBJECT-TYPE
The threshold for the count of coding violations at the section layer.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.6Unsigned32read-writecurrent
olOSCPMThresholdESSValue
OBJECT-TYPE
The threshold for the count of errored seconds at the section layer.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.7Unsigned32read-writecurrent
olOSCPMThresholdSESSValue
OBJECT-TYPE
The threshold for the count of severely errored seconds at the section layer.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.8Unsigned32read-writecurrent
olOSCPMThresholdSEFSSValue
OBJECT-TYPE
The threshold for the count of severely errored framing seconds at the section layer.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.9Unsigned32read-writecurrent
olOSCPMThresholdUASSValue
OBJECT-TYPE
The threshold for the count of unavailable seconds at the section layer.
1.3.6.1.4.1.18070.2.2.1.16.12.3.1.10Unsigned32read-writecurrent
olPortCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for ports on equipment modules assigned to optical layer groupings.
1.3.6.1.4.1.18070.2.2.1.16.12.4not-accessiblecurrent
olPortCrntPMEntry
OBJECT-TYPE
The row entry object of the optical layer port current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer port.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1not-accessiblecurrent
olPortCrntPMCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the port targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.1CpTypenot-accessiblecurrent
olPortCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf in which the port targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
olPortCrntPMSlotIdx
OBJECT-TYPE
The number of the slot in which the port targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.3INTEGER (1..20)not-accessiblecurrent
olPortCrntPMTypeIdx
OBJECT-TYPE
The type of port targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.4OlPortTypenot-accessiblecurrent
olPortCrntPMIdx
OBJECT-TYPE
The number of the port of the specified port type targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.5INTEGER (1..4)not-accessiblecurrent
olPortCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.6PMIntervalTypenot-accessiblecurrent
olPortCrntPMOPRValue
OBJECT-TYPE
The instantaneous optical power received on the port.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.7FixedX10read-onlycurrent
olPortCrntPMOPRTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.8DateAndTimeread-onlycurrent
olPortCrntPMOPRValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.9PMValidityread-onlycurrent
olPortCrntPMOPRMinValue
OBJECT-TYPE
The minimum optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.10FixedX10read-onlycurrent
olPortCrntPMOPRMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.11DateAndTimeread-onlycurrent
olPortCrntPMOPRMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.12PMValidityread-onlycurrent
olPortCrntPMOPRMaxValue
OBJECT-TYPE
The maximum optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.13FixedX10read-onlycurrent
olPortCrntPMOPRMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.14DateAndTimeread-onlycurrent
olPortCrntPMOPRMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.15PMValidityread-onlycurrent
olPortCrntPMOPRAvgValue
OBJECT-TYPE
The average optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.16FixedX10read-onlycurrent
olPortCrntPMOPRAvgTimeStamp
OBJECT-TYPE
The date and time stamp of the average optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.17DateAndTimeread-onlycurrent
olPortCrntPMOPRAvgValidity
OBJECT-TYPE
Indicates the validity of the provided average optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.18PMValidityread-onlycurrent
olPortCrntPMOPRStdDevValue
OBJECT-TYPE
The standard deviation from the average of the optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.19FixedX10read-onlycurrent
olPortCrntPMOPRStdDevTimeStamp
OBJECT-TYPE
The date and time stamp of the standard deviation value for the optical power received.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.20DateAndTimeread-onlycurrent
olPortCrntPMOPRStdDevValidity
OBJECT-TYPE
Indicates the validity of the provided standard deviation value for the optical power received.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.21PMValidityread-onlycurrent
olPortCrntPMOPTValue
OBJECT-TYPE
The instantaneous optical power transmitted on the port.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.22FixedX10read-onlycurrent
olPortCrntPMOPTTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.23DateAndTimeread-onlycurrent
olPortCrntPMOPTValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.24PMValidityread-onlycurrent
olPortCrntPMOPTMinValue
OBJECT-TYPE
The minimum optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.25FixedX10read-onlycurrent
olPortCrntPMOPTMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.26DateAndTimeread-onlycurrent
olPortCrntPMOPTMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.27PMValidityread-onlycurrent
olPortCrntPMOPTMaxValue
OBJECT-TYPE
The maximum optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.28FixedX10read-onlycurrent
olPortCrntPMOPTMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.29DateAndTimeread-onlycurrent
olPortCrntPMOPTMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.30PMValidityread-onlycurrent
olPortCrntPMOPTAvgValue
OBJECT-TYPE
The average optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.31FixedX10read-onlycurrent
olPortCrntPMOPTAvgTimeStamp
OBJECT-TYPE
The date and time stamp of the average optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.32DateAndTimeread-onlycurrent
olPortCrntPMOPTAvgValidity
OBJECT-TYPE
Indicates the validity of the provided average optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.33PMValidityread-onlycurrent
olPortCrntPMOPTStdDevValue
OBJECT-TYPE
The standard deviation from the average of the optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.34FixedX10read-onlycurrent
olPortCrntPMOPTStdDevTimeStamp
OBJECT-TYPE
The date and time stamp of the standard deviation value for the optical power transmitted.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.35DateAndTimeread-onlycurrent
olPortCrntPMOPTStdDevValidity
OBJECT-TYPE
Indicates the validity of the provided standard deviation value for the optical power transmitted.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.36PMValidityread-onlycurrent
olPortCrntPMLossRxValue
OBJECT-TYPE
The optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.37FixedX10read-onlycurrent
olPortCrntPMLossRxTimeStamp
OBJECT-TYPE
The date and time stamp of the receive loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.38DateAndTimeread-onlycurrent
olPortCrntPMLossRxValidity
OBJECT-TYPE
Indicates the validity of the provided receive loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.39PMValidityread-onlycurrent
olPortCrntPMLossTxValue
OBJECT-TYPE
The optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.40FixedX10read-onlycurrent
olPortCrntPMLossTxTimeStamp
OBJECT-TYPE
The date and time stamp of the transmit loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.41DateAndTimeread-onlycurrent
olPortCrntPMLossTxValidity
OBJECT-TYPE
Indicates the validity of the provided transmit loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.42PMValidityread-onlycurrent
olPortCrntPMInitializeAll
OBJECT-TYPE
Used to initialize all binned PM values for a given entry in the table.
1.3.6.1.4.1.18070.2.2.1.16.12.4.1.43InitializeCmdread-writecurrent
olPortHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for optical layer ports.
1.3.6.1.4.1.18070.2.2.1.16.12.5not-accessiblecurrent
olPortHistPMEntry
OBJECT-TYPE
The row entry object of the Optical Layer Port Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given optical layer port.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1not-accessiblecurrent
olPortHistPMCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the port targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.1CpTypenot-accessiblecurrent
olPortHistPMShelfIdx
OBJECT-TYPE
The number of the shelf in which the port targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
olPortHistPMSlotIdx
OBJECT-TYPE
The number of the slot in which the port targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.3INTEGER (1..20)not-accessiblecurrent
olPortHistPMTypeIdx
OBJECT-TYPE
The type of port targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.4OlPortTypenot-accessiblecurrent
olPortHistPMIdx
OBJECT-TYPE
The number of the port of the specified port type targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.5INTEGER (1..4)not-accessiblecurrent
olPortHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.6PMIntervalTypenot-accessiblecurrent
olPortHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.7INTEGER (1..96)not-accessiblecurrent
olPortHistPMOPRValue
OBJECT-TYPE
The instantaneous optical power received on the port.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.8FixedX10read-onlycurrent
olPortHistPMOPRTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.9DateAndTimeread-onlycurrent
olPortHistPMOPRValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.10PMValidityread-onlycurrent
olPortHistPMOPRMinValue
OBJECT-TYPE
The minimum optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.11FixedX10read-onlycurrent
olPortHistPMOPRMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.12DateAndTimeread-onlycurrent
olPortHistPMOPRMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.13PMValidityread-onlycurrent
olPortHistPMOPRMaxValue
OBJECT-TYPE
The maximum optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.14FixedX10read-onlycurrent
olPortHistPMOPRMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.15DateAndTimeread-onlycurrent
olPortHistPMOPRMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.16PMValidityread-onlycurrent
olPortHistPMOPRAvgValue
OBJECT-TYPE
The average optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.17FixedX10read-onlycurrent
olPortHistPMOPRAvgTimeStamp
OBJECT-TYPE
The date and time stamp of the average optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.18DateAndTimeread-onlycurrent
olPortHistPMOPRAvgValidity
OBJECT-TYPE
Indicates the validity of the provided average optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.19PMValidityread-onlycurrent
olPortHistPMOPRStdDevValue
OBJECT-TYPE
The standard deviation from the average of the optical power received on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.20FixedX10read-onlycurrent
olPortHistPMOPRStdDevTimeStamp
OBJECT-TYPE
The date and time stamp of the standard deviation value for the optical power received.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.21DateAndTimeread-onlycurrent
olPortHistPMOPRStdDevValidity
OBJECT-TYPE
Indicates the validity of the provided standard deviation value for the optical power received.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.22PMValidityread-onlycurrent
olPortHistPMOPTValue
OBJECT-TYPE
The instantaneous optical power transmitted on the port.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.23FixedX10read-onlycurrent
olPortHistPMOPTTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.24DateAndTimeread-onlycurrent
olPortHistPMOPTValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.25PMValidityread-onlycurrent
olPortHistPMOPTMinValue
OBJECT-TYPE
The minimum optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.26FixedX10read-onlycurrent
olPortHistPMOPTMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.27DateAndTimeread-onlycurrent
olPortHistPMOPTMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.28PMValidityread-onlycurrent
olPortHistPMOPTMaxValue
OBJECT-TYPE
The maximum optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.29FixedX10read-onlycurrent
olPortHistPMOPTMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.30DateAndTimeread-onlycurrent
olPortHistPMOPTMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.31PMValidityread-onlycurrent
olPortHistPMOPTAvgValue
OBJECT-TYPE
The average optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.32FixedX10read-onlycurrent
olPortHistPMOPTAvgTimeStamp
OBJECT-TYPE
The date and time stamp of the average optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.33DateAndTimeread-onlycurrent
olPortHistPMOPTAvgValidity
OBJECT-TYPE
Indicates the validity of the provided average optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.34PMValidityread-onlycurrent
olPortHistPMOPTStdDevValue
OBJECT-TYPE
The standard deviation from the average of the optical power transmitted on the port over the interval.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.35FixedX10read-onlycurrent
olPortHistPMOPTStdDevTimeStamp
OBJECT-TYPE
The date and time stamp of the standard deviation value for the optical power transmitted.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.36DateAndTimeread-onlycurrent
olPortHistPMOPTStdDevValidity
OBJECT-TYPE
Indicates the validity of the provided standard deviation value for the optical power transmitted.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.37PMValidityread-onlycurrent
olPortHistPMLossRxValue
OBJECT-TYPE
The optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.38FixedX10read-onlycurrent
olPortHistPMLossRxTimeStamp
OBJECT-TYPE
The date and time stamp of the receive loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.39DateAndTimeread-onlycurrent
olPortHistPMLossRxValidity
OBJECT-TYPE
Indicates the validity of the provided receive loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.40PMValidityread-onlycurrent
olPortHistPMLossTxValue
OBJECT-TYPE
The optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.41FixedX10read-onlycurrent
olPortHistPMLossTxTimeStamp
OBJECT-TYPE
The date and time stamp of the transmit loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.42DateAndTimeread-onlycurrent
olPortHistPMLossTxValidity
OBJECT-TYPE
Indicates the validity of the provided transmit loss value.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.43PMValidityread-onlycurrent
olPortHistPMInitializeAll
OBJECT-TYPE
Used to initialize all binned PM values for a given entry in the table.
1.3.6.1.4.1.18070.2.2.1.16.12.5.1.44InitializeCmdread-writecurrent
wchCrntPMTable
OBJECT-TYPE
A table of current performance monitoring statistics collected for wavelength channels.
1.3.6.1.4.1.18070.2.2.1.16.12.6not-accessiblecurrent
wchCrntPMEntry
OBJECT-TYPE
The row entry object of the Wavelength Channel Current Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a wavelength channel object in an optical layer grouping.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1not-accessiblecurrent
wchCrntPMCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.1CpTypenot-accessiblecurrent
wchCrntPMShelfIdx
OBJECT-TYPE
The number of the shelf in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
wchCrntPMSlotIdx
OBJECT-TYPE
The number of the slot in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.3INTEGER (1..20)not-accessiblecurrent
wchCrntPMPortTypeIdx
OBJECT-TYPE
The type of port in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.4OlPortTypenot-accessiblecurrent
wchCrntPMPortIdx
OBJECT-TYPE
The number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.5INTEGER (1..4)not-accessiblecurrent
wchCrntPMIdx
OBJECT-TYPE
The number of the wavelength channel targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.6INTEGER (135..610)not-accessiblecurrent
wchCrntPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.7PMIntervalTypenot-accessiblecurrent
wchCrntPMOPRValue
OBJECT-TYPE
The instantaneous optical power received on the channel.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.8FixedX10read-onlycurrent
wchCrntPMOPRTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.9DateAndTimeread-onlycurrent
wchCrntPMOPRValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.10PMValidityread-onlycurrent
wchCrntPMOPRMinValue
OBJECT-TYPE
The minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.11FixedX10read-writecurrent
wchCrntPMOPRMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.12DateAndTimeread-onlycurrent
wchCrntPMOPRMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.13PMValidityread-onlycurrent
wchCrntPMOPRMinInitialize
OBJECT-TYPE
Used to initialize the value of the wchCrntPMOPRMinValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.14InitializeCmdread-writecurrent
wchCrntPMOPRMaxValue
OBJECT-TYPE
The maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.15FixedX10read-writecurrent
wchCrntPMOPRMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.16DateAndTimeread-onlycurrent
wchCrntPMOPRMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.17PMValidityread-writecurrent
wchCrntPMOPRMaxInitialize
OBJECT-TYPE
Used to initialize the value of the wchCrntPMOPRMaxValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.18InitializeCmdread-writecurrent
wchCrntPMOPTValue
OBJECT-TYPE
The instantaneous optical power transmitted on the channel.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.19FixedX10read-onlycurrent
wchCrntPMOPTTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.20DateAndTimeread-onlycurrent
wchCrntPMOPTValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.21PMValidityread-onlycurrent
wchCrntPMOPTMinValue
OBJECT-TYPE
The minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.22FixedX10read-writecurrent
wchCrntPMOPTMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.23DateAndTimeread-onlycurrent
wchCrntPMOPTMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.24PMValidityread-onlycurrent
wchCrntPMOPTMinInitialize
OBJECT-TYPE
Used to initialize the value of the wchCrntPMOPTMinValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.25InitializeCmdread-writecurrent
wchCrntPMOPTMaxValue
OBJECT-TYPE
The maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.26FixedX10read-writecurrent
wchCrntPMOPTMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.27DateAndTimeread-onlycurrent
wchCrntPMOPTMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.28PMValidityread-onlycurrent
wchCrntPMOPTMaxInitialize
OBJECT-TYPE
Used to initialize the value of the wchCrntPMOPTMaxValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.6.1.29InitializeCmdread-writecurrent
wchHistPMTable
OBJECT-TYPE
A table of historical performance monitoring statistics collected for wavelength channels.
1.3.6.1.4.1.18070.2.2.1.16.12.7not-accessiblecurrent
wchHistPMEntry
OBJECT-TYPE
The row entry object of the Wavelength Channel Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a wavelength channel object in an optical layer grouping.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1not-accessiblecurrent
wchHistPMCpTypeIdx
OBJECT-TYPE
The type of circuit pack on which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.1CpTypenot-accessiblecurrent
wchHistPMShelfIdx
OBJECT-TYPE
The number of the shelf in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.2INTEGER (1 | 11 | 21 | 31)not-accessiblecurrent
wchHistPMSlotIdx
OBJECT-TYPE
The number of the slot in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.3INTEGER (1..20)not-accessiblecurrent
wchHistPMPortTypeIdx
OBJECT-TYPE
The type of port in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.4OlPortTypenot-accessiblecurrent
wchHistPMPortIdx
OBJECT-TYPE
The number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.5INTEGER (1..4)not-accessiblecurrent
wchHistPMIdx
OBJECT-TYPE
The number of the wavelength channel targeted for PMs.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.6INTEGER (135..610)not-accessiblecurrent
wchHistPMIntervalTypeIdx
OBJECT-TYPE
The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.7PMIntervalTypenot-accessiblecurrent
wchHistPMIntervalIdx
OBJECT-TYPE
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.8INTEGER (1..96)not-accessiblecurrent
wchHistPMOPRValue
OBJECT-TYPE
The instantaneous optical power received on the channel.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.9FixedX10read-onlycurrent
wchHistPMOPRTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.10DateAndTimeread-onlycurrent
wchHistPMOPRValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.11PMValidityread-onlycurrent
wchHistPMOPRMinValue
OBJECT-TYPE
The minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.12FixedX10read-writecurrent
wchHistPMOPRMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.13DateAndTimeread-onlycurrent
wchHistPMOPRMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.14PMValidityread-onlycurrent
wchHistPMOPRMinInitialize
OBJECT-TYPE
Used to initialize the value of the wchHistPMOPRMinValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.15InitializeCmdread-writecurrent
wchHistPMOPRMaxValue
OBJECT-TYPE
The maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.16FixedX10read-writecurrent
wchHistPMOPRMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.17DateAndTimeread-onlycurrent
wchHistPMOPRMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power received value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.18PMValidityread-onlycurrent
wchHistPMOPRMaxInitialize
OBJECT-TYPE
Used to initialize the value of the wchHistPMOPRMaxValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.19InitializeCmdread-writecurrent
wchHistPMOPTValue
OBJECT-TYPE
The instantaneous optical power transmitted on the channel.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.20FixedX10read-onlycurrent
wchHistPMOPTTimeStamp
OBJECT-TYPE
The date and time stamp of the instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.21DateAndTimeread-onlycurrent
wchHistPMOPTValidity
OBJECT-TYPE
Indicates the validity of the provided instantaneous optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.22PMValidityread-onlycurrent
wchHistPMOPTMinValue
OBJECT-TYPE
The minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.23FixedX10read-writecurrent
wchHistPMOPTMinTimeStamp
OBJECT-TYPE
The date and time stamp of the minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.24DateAndTimeread-onlycurrent
wchHistPMOPTMinValidity
OBJECT-TYPE
Indicates the validity of the provided minimum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.25PMValidityread-onlycurrent
wchHistPMOPTMinInitialize
OBJECT-TYPE
Used to initialize the value of the wchHistPMOPTMinValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.26InitializeCmdread-writecurrent
wchHistPMOPTMaxValue
OBJECT-TYPE
The maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.27FixedX10read-writecurrent
wchHistPMOPTMaxTimeStamp
OBJECT-TYPE
The date and time stamp of the maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.28DateAndTimeread-onlycurrent
wchHistPMOPTMaxValidity
OBJECT-TYPE
Indicates the validity of the provided maximum optical power transmitted value.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.29PMValidityread-onlycurrent
wchHistPMOPTMaxInitialize
OBJECT-TYPE
Used to initialize the value of the wchHistPMOPTMaxValue object.
1.3.6.1.4.1.18070.2.2.1.16.12.7.1.30InitializeCmdread-writecurrent
olOSCEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.33.1
olPortEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.33.2
wdmEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.33.3
wchEvtNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.1.33.4
olOSCCondNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.2.28.1
olPortCondNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.2.28.2
wdmCondNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.2.28.3
wchCondNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.18070.2.2.2.2.28.4

Notifications

NameOIDStatus
olOSCStatusChangeEvt
NOTIFICATION-TYPE
Notification of a change in the operational status or operational status qualifier or an optical layer OSC facility.
1.3.6.1.4.1.18070.2.2.2.1.33.1.0.1current
olOSCTcaEvt
NOTIFICATION-TYPE
This trap provides a threshold crossing alert for a performance monitoring statistic on an optical layer OSC facility.
1.3.6.1.4.1.18070.2.2.2.1.33.1.0.2current
olPortStatusChangeEvt
NOTIFICATION-TYPE
Notification of a change in the operational status or operational status qualifier or an optical layer port.
1.3.6.1.4.1.18070.2.2.2.1.33.2.0.1current
wdmStatusChangeEvt
NOTIFICATION-TYPE
Notification of a change in the operational status or operational status qualifier or an optical layer WDM object.
1.3.6.1.4.1.18070.2.2.2.1.33.3.0.1current
wchStatusChangeEvt
NOTIFICATION-TYPE
Notification of a change in the operational status or operational status qualifier or an optical layer WDM object.
1.3.6.1.4.1.18070.2.2.2.1.33.4.0.1current
olOSCLossOfLightRxCond
NOTIFICATION-TYPE
There is no input signal detected for the identified OSC.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.1current
olOSCLossOfLightRxClear
NOTIFICATION-TYPE
A previously active optical layer OSC Receive Loss of Light condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.2current
olOSCLossOfFrameCond
NOTIFICATION-TYPE
There input OSC signal cannot be framed.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.3current
olOSCLossOfFrameClear
NOTIFICATION-TYPE
A previously active optical layer OSC Loss of Frame condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.4current
olOSCLossOfLightTxCond
NOTIFICATION-TYPE
There is no transmitted signal power detected for the identified OSC.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.5current
olOSCLossOfLightTxClear
NOTIFICATION-TYPE
A previously active optical layer OSC Transmit Loss of Light condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.6current
olOSCFarEndIdMismatchCond
NOTIFICATION-TYPE
The identifying attributes received for the far-end node do not match the expected identifying attributes.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.7current
olOSCFarEndIdMismatchClear
NOTIFICATION-TYPE
A previously active optical layer OSC Far End Identification Mismatch condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.8current
olOSCFarEndNodeCnfgInconsistentCond
NOTIFICATION-TYPE
The optical layer group configuration type for the far-end node is inconsistent with the configuration type of the local optical layer group.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.9current
olOSCFarEndNodeCnfgInconsistentClear
NOTIFICATION-TYPE
A previously active optical layer OSC Far End Node Configuration Inconsistent condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.10current
olOSCSpanContCommCond
NOTIFICATION-TYPE
Bi-directional control communications with the node at the opposite end of the span section have failed.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.11current
olOSCSpanContCommClear
NOTIFICATION-TYPE
A previously active optical layer OSC Section Control Communications condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.12current
olOSCEqlzContCommCond
NOTIFICATION-TYPE
Bi-directional control communications with the node at the opposite end of the equalization section have failed.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.13current
olOSCEqlzContCommClear
NOTIFICATION-TYPE
A previously active optical layer OSC Equalization Control Communications condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.14current
olOSCOpticalBackReflOutOfSpecCond
NOTIFICATION-TYPE
The measured optical back reflection of the transmitted OSC signal exceeds the specified maximum.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.15current
olOSCOpticalBackReflOutOfSpecClear
NOTIFICATION-TYPE
A previously active optical layer OSC Optical Back Reflection Out of Specification condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.16current
olOSCOpticalBackReflHighThCond
NOTIFICATION-TYPE
The measured optical back reflection of the transmitted OSC signal exceeds the high threshold.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.17current
olOSCOpticalBackReflHighThClear
NOTIFICATION-TYPE
A previously active optical layer OSC Optical Back Reflection High Threshold condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.1.0.18current
olPortPowerOutOfSpecRxCond
NOTIFICATION-TYPE
The power received on the optical port is outside the operating range.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.1current
olPortPowerOutOfSpecRxClear
NOTIFICATION-TYPE
A previously active optical layer port Received Power Out Of Specification condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.2current
olPortLossOfLightRxCond
NOTIFICATION-TYPE
There is no received optical power detected for the port.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.3current
olPortLossOfLightRxClear
NOTIFICATION-TYPE
A previously active optical layer port Receive Loss of Light condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.4current
olPortLossRxOutOfSpecCond
NOTIFICATION-TYPE
The optical power loss measured over the span or fiber connection terminating on the port in the receive direction is outside the specification range.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.5current
olPortLossRxOutOfSpecClear
NOTIFICATION-TYPE
A previously active optical layer port Receive Loss out of Specification condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.6current
olPortLossRxHighThCond
NOTIFICATION-TYPE
The optical power loss measured over the span terminating on the line port in the receive direction is above the high threshold level.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.7current
olPortLossRxHighThClear
NOTIFICATION-TYPE
A previously active optical layer port Receive Loss High Threshold condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.8current
olPortAPSDCond
NOTIFICATION-TYPE
An automatic power shutdown has been automatically operated on the optical layer port for safety reasons.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.9current
olPortAPSDClear
NOTIFICATION-TYPE
A previously active optical layer port Automatic Power Shutdown condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.10current
olPortPayloadMissingIndCond
NOTIFICATION-TYPE
A Payload Missing Indication has been received on the optical layer port input.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.11current
olPortPayloadMissingIndClear
NOTIFICATION-TYPE
A previously active optical layer port Payload Missing Indication condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.12current
olPortBackwardDefectIndCond
NOTIFICATION-TYPE
A Backward Defect Indication has been received on the optical layer port input.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.13current
olPortBackwardDefectIndClear
NOTIFICATION-TYPE
A previously active optical layer port Backward Defect Indication condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.14current
olPortChannelCountDeficiencyCond
NOTIFICATION-TYPE
A channel count deficiency condition has been raised against the port. This indicates that the number of channels received on the port is less than the number required to maintain stable optical control given the high span loss level detected on the receive span fiber.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.15current
olPortChannelCountDeficiencyClear
NOTIFICATION-TYPE
A previously active optical layer port Channel Count Deficiency condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.16current
olPortConnectionMismatchCond
NOTIFICATION-TYPE
The identified optical layer port is incorrectly connected and must be re-connected to a different remote end port.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.17current
olPortConnectionMismatchClear
NOTIFICATION-TYPE
A previously active optical layer port Connection Mismatch condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.18current
olPortConnectionValidationTimeoutCond
NOTIFICATION-TYPE
Connection validation could not be performed on the identified optical layer port, which may mean that the port is incorrectly connected.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.19current
olPortConnectionValidationTimeoutClear
NOTIFICATION-TYPE
A previously active optical layer port Connection Validation Timeout condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.2.0.20current
wdmInvalidPreAmpOperCnfgCond
NOTIFICATION-TYPE
The WDM optical pre-amplifier is operating at a configuration which is invalid for the detected loss.
1.3.6.1.4.1.18070.2.2.2.2.28.3.0.1current
wdmInvalidPreAmpOperCnfgClear
NOTIFICATION-TYPE
A previously active WDM Invalid Pre-Amplifier Operating Configuration condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.3.0.2current
wdmInvalidMidAmpOperCnfgCond
NOTIFICATION-TYPE
The WDM optical mid-amplifier is operating at a configuration which is invalid for the detected loss.
1.3.6.1.4.1.18070.2.2.2.2.28.3.0.3current
wdmInvalidMidAmpOperCnfgClear
NOTIFICATION-TYPE
A previously active WDM Invalid Mid-Amplifier Operating Configuration condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.3.0.4current
wdmInvalidBoostAmpOperCnfgCond
NOTIFICATION-TYPE
The WDM optical booster-amplifier is operating at a configuration which is invalid for the detected loss.
1.3.6.1.4.1.18070.2.2.2.2.28.3.0.5current
wdmInvalidBoostAmpOperCnfgClear
NOTIFICATION-TYPE
A previously active WDM Invalid Booster-Amplifier Operating Configuration condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.3.0.6current
wchPowerOutOfSpecRxCond
NOTIFICATION-TYPE
The power received for the wavelength channel is outside the operating range.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.1deprecated
wchPowerOutOfSpecRxClear
NOTIFICATION-TYPE
A previously active Wavelength Channel Received Power Out Of Specification condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.2deprecated
wchLossOfLightRxCond
NOTIFICATION-TYPE
There is no received optical power detected for the channel.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.3current
wchLossOfLightRxClear
NOTIFICATION-TYPE
A previously active wavelength channel Receive Loss of Light condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.4current
wchPowerOutOfSpecTxCond
NOTIFICATION-TYPE
The power transmitted for the wavelength channel is outside the operating range.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.5current
wchPowerOutOfSpecTxClear
NOTIFICATION-TYPE
A previously active Wavelength Channel Transmitted Power Out Of Specification condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.6current
wchLossOfLightTxCond
NOTIFICATION-TYPE
There is no transmitted optical power detected for the channel.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.7current
wchLossOfLightTxClear
NOTIFICATION-TYPE
A previously active wavelength channel Transmitted Loss of Light condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.8current
wchUnequippedCond
NOTIFICATION-TYPE
An unequipped indication for the wavelength channel has been received from the far-end node of the line span.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.9current
wchUnequippedClear
NOTIFICATION-TYPE
A previously active wavelength channel unequipped indication condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.10current
wchAISCond
NOTIFICATION-TYPE
An alarm indication signal for the wavelength channel has been received from the far-end node of the line span.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.11current
wchAISClear
NOTIFICATION-TYPE
A previously active wavelength channel alarm indication signal condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.12current
wchPowerOutOfSpecRxHighCond
NOTIFICATION-TYPE
The power received for the wavelength channel exceeds the upper limit of the normal operating range.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.13deprecated
wchPowerOutOfSpecRxHighClear
NOTIFICATION-TYPE
A previously active Wavelength Channel Received Power Out Of Specification High condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.14deprecated
wchPowerOutOfSpecRxLowCond
NOTIFICATION-TYPE
The power received for the wavelength channel is below the lower limit of the normal operating range.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.15deprecated
wchPowerOutOfSpecRxLowClear
NOTIFICATION-TYPE
A previously active Wavelength Channel Received Power Out Of Specification Low condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.16deprecated
wchPowerRxHighFailCond
NOTIFICATION-TYPE
The power received for the wavelength channel exceeds the maximum allowable level. The wavelength channel is declared to be failed at this power level.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.17deprecated
wchPowerRxHighFailClear
NOTIFICATION-TYPE
A previously active Wavelength Channel Received Power High Fail condition has cleared.
1.3.6.1.4.1.18070.2.2.2.2.28.4.0.18deprecated