ARUBA-TC

Namespace: arubaos
Source file: ARUBA-TC
Digest: sha256:db4eab5875fed7a4fe84a0b8b31fa2d56592a1362ac10d38e165c02491af856b

Imports

From	Symbols
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`

Imported by

15 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ARUBA-TC
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

Name	OID	Syntax	Access	Status
ArubaACLAction TEXTUAL-CONVENTION Represents the Actions in an ACL rule.				current
ArubaACLDomain TEXTUAL-CONVENTION Represents both the source and destination to which an ACL rule will be applied.				current
ArubaACLNetworkServiceType TEXTUAL-CONVENTION Represents the network service in an ACL Rule.				current
ArubaAPDot1dState TEXTUAL-CONVENTION Represents the AP port spanning tree state.				current
ArubaAPMasterStatus TEXTUAL-CONVENTION AP status as seen by the master controller (used to indicate a status change).				current
ArubaAPMatchMethod TEXTUAL-CONVENTION Represents the match method of a suspected rogue AP.				current
ArubaAPMatchType TEXTUAL-CONVENTION Represents the match type of a suspected rogue AP.				current
ArubaAPStatus TEXTUAL-CONVENTION The status of the access point.				current
ArubaAPUplinkChangeReason TEXTUAL-CONVENTION Used to specify the reason for AP uplink change. linkFailure - The uplink went down vpnFailure - VPN tunnel could not be sustained using the uplink preemption - The uplink was pre-empted by a higher-priority uplink				current
ArubaAPUplinkType TEXTUAL-CONVENTION AP uplink type				current
ArubaARMChangeReason TEXTUAL-CONVENTION The reason for ARM or AirMatch based change.				current
ArubaAccessPointMode TEXTUAL-CONVENTION The mode of the access point.				current
ArubaActiveState TEXTUAL-CONVENTION Represents if a feature is active or inactive.				current
ArubaAddressType TEXTUAL-CONVENTION Address Type.				current
ArubaAntennaSetting TEXTUAL-CONVENTION Represents the status of the external antenna.				current
ArubaAuthServerType TEXTUAL-CONVENTION The type of the auth server.				current
ArubaAuthenticationMethods TEXTUAL-CONVENTION Authentication Method.				current
ArubaBlackListReason TEXTUAL-CONVENTION Black List Reason.				current
ArubaCallStates TEXTUAL-CONVENTION The Call state.				current
ArubaCardType TEXTUAL-CONVENTION Type of the hardware module.				current
ArubaConfigurationChangeType TEXTUAL-CONVENTION Configuration Change Types.				current
ArubaConfigurationState TEXTUAL-CONVENTION Configuration Transfer Types.				current
ArubaDBType TEXTUAL-CONVENTION DataBase Type.				current
ArubaDaysOfWeek TEXTUAL-CONVENTION Represents the Actions in an ACL rule.				current
ArubaDot1dState TEXTUAL-CONVENTION Represents the controller port spanning tree state.				current
ArubaDot3azStatus TEXTUAL-CONVENTION Represents the state of Energy Efficient Ethernet (802.3az).				current
ArubaDot3bzStatus TEXTUAL-CONVENTION Represents the state of 802.3bz.				current
ArubaDual5GMode TEXTUAL-CONVENTION Dual 5GHz Operating Mode				current
ArubaESIServerMode TEXTUAL-CONVENTION The mode of the ESI server.				current
ArubaESIServerStatus TEXTUAL-CONVENTION The status of the ESI server.				current
ArubaEnableValue TEXTUAL-CONVENTION Represents a Flag which is either Enabled or Disabled.				current
ArubaEncryptionMethods TEXTUAL-CONVENTION Represents the Actions in an ACL rule.				current
ArubaEncryptionType TEXTUAL-CONVENTION Encryption Method.				current
ArubaEnet1Mode TEXTUAL-CONVENTION Represents the Mode of the Ethernet port on the Access Point				current
ArubaFlexRadioMode TEXTUAL-CONVENTION Flex Radio Operating Mode				current
ArubaFrameType TEXTUAL-CONVENTION Represents the Frame type.				current
ArubaHTExtChannel TEXTUAL-CONVENTION Represents the extension channel offset relative to the current channel.				current
ArubaHTMode TEXTUAL-CONVENTION Represents the HT status of the access point or client.				current
ArubaHTRate TEXTUAL-CONVENTION Represents HT rate				current
ArubaHaConnectivityStatus TEXTUAL-CONVENTION Represents the HA standby connectivity status of the Access Point				current
ArubaHaRole TEXTUAL-CONVENTION Represents the HA role of the Aruba controller				current
ArubaHashAlgorithms TEXTUAL-CONVENTION Represents the Actions in an ACL rule.				current
ArubaIfState TEXTUAL-CONVENTION Used to specify the state of an interface. linkUp - Operational state of this interface is up. linkDown - Operational state of this interface is down.				current
ArubaIfStateChangeReason TEXTUAL-CONVENTION Used to specify the reason for interface state change. admin - User has explicitly issued 'shutdown' or 'no shutdown' configuration from CLI on this interface. loopProtect - If ifState of an interface changes to linkDown, then it is used to specify that a loop has been detected on this interface by loop protect mechanism. If ifState of an interface changes to linkUp, then it is used to specify that loop-protect error has been cleared out on this interface through port auto-recovery mechanism or through explicit clear error-recovery command. macLimit - If ifState of an interface changes to linkDown, then it is used to specify that number of learnt MACs on this interface exceeds the limit configured. If ifState of an interface changes to linkUp, then it is used to specify that mac-limit error has been cleared out on this interface through port auto-recovery mechanism or through explicit clear error-recovery command. raGuard - If ifState of an interface changes to linkDown, then it is used to specify that invalid router advertisement has been identified on this interface, resulting shutting down of this interface. If ifState of an interface changes to linkUp, then it is used to specify that raGuard error has been cleared out on this interface through port auto-recovery mechanism or through explicit clear error-recovery command. bpduGuard - If ifState of an interface changes to linkDown, then it is used to specify that BPDU is received on this interface resulting shutting down of this interface. If ifState of an interface changes to linkUp, then it is used to specify that BPDU Guard error has been cleared out on this interface through port auto-recovery mechanism or through explicit clear error-recovery command.				current
ArubaIfType TEXTUAL-CONVENTION The type of interface referred to by the value of ifIndex.				current
ArubaMeshRole TEXTUAL-CONVENTION Mesh role				current
ArubaMonAuthAlgorithm TEXTUAL-CONVENTION Represents the WPA authentication algorithm supported by the access point.				current
ArubaMonEncryptionCipher TEXTUAL-CONVENTION Represents the WPA encryption cipher supported by the access point.				current
ArubaMonEncryptionType TEXTUAL-CONVENTION Represents the encryption type supported by the access point.				current
ArubaMonitorMode TEXTUAL-CONVENTION Represents whether the AP has any radios dedicated to monitoring.				current
ArubaOperStateValue TEXTUAL-CONVENTION Represents Operational state of an interface.				current
ArubaPhyType TEXTUAL-CONVENTION Represents the PHY-type of the access point or client. Wired clients will show 'wired' in user MIB entries.				current
ArubaPoeState TEXTUAL-CONVENTION Represents the POE mode.				current
ArubaPortDuplex TEXTUAL-CONVENTION Port Duplexity.				current
ArubaPortMode TEXTUAL-CONVENTION Represents the controller port mode.				current
ArubaPortSpeed TEXTUAL-CONVENTION Port Speed.				current
ArubaPortType TEXTUAL-CONVENTION Port Type.				current
ArubaPortalServerDownReason TEXTUAL-CONVENTION Used to specify the reason for Portal server down. connectFail - Connect Portal server fail				current
ArubaRogueApType TEXTUAL-CONVENTION Represents the Rogue AP Type.				current
ArubaSplit5GMode TEXTUAL-CONVENTION Split 5GHz Operating Mode				current
ArubaStackChangeEvent TEXTUAL-CONVENTION Used to specify the event which caused change in topology in stack.				current
ArubaStackIfTopoJoined TEXTUAL-CONVENTION Used to specify whether an interface has joined the stacking topology or left the topology.				current
ArubaStackState TEXTUAL-CONVENTION The state of the stack element in the stack. primary - the stack element is in primary state. secondary - the stack element is in secondary state. linecard - the stack element is in linecard state. away - the stack element is in inactive state. primary, secondary and linecard implies active state of the stack element.				current
ArubaStationType TEXTUAL-CONVENTION Represents the station type.				current
ArubaSubAuthenticationMethods TEXTUAL-CONVENTION Sub Authentication Method (e.g. EAP type).				current
ArubaSupportStatus TEXTUAL-CONVENTION Represents if a feature is supported or unsupported.				current
ArubaSwitchRole TEXTUAL-CONVENTION Represents the role of the controller				current
ArubaThresholdResourceType TEXTUAL-CONVENTION Represents the Threshold Resource Types				current
ArubaUnprovisionedStatus TEXTUAL-CONVENTION Represents whether the AP is provisioned or not.				current
ArubaUserForwardMode TEXTUAL-CONVENTION User Forwarding Mode.				current
ArubaVlanValidRange TEXTUAL-CONVENTION Represents the Valid Vlan Id Range.				current
ArubaVoiceCacBit TEXTUAL-CONVENTION Voice CAC bit flags				current
ArubaVoiceCdrDirection TEXTUAL-CONVENTION VoIP CDR direction				current
ArubaVoipProtocol TEXTUAL-CONVENTION VoIP protocol used				current
ArubaVoipProtocolType TEXTUAL-CONVENTION The type of VoIP protocols supported.				current
ArubaVoipRegState TEXTUAL-CONVENTION VoIP registered state				current
ArubaVrrpState TEXTUAL-CONVENTION DataBase Type.				current
InterfaceIndex TEXTUAL-CONVENTION A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.				current