WLSX-WLAN-MIB
- Registered at
- 1.3.6.1.4.1.14823.2.2.1.5
- Last updated
- 1910-01-26 18:06
- Organization
- Aruba Wireless Networks
- Revisions
- 1910-01-26 18:06
- Namespace
- arubaos
- Source file
WLSX-WLAN-MIB- Digest
sha256:9b4ea0f9024bcaad7e5e2c10683039ec24c704538d515ac847de6986f1b07da6
Description
This MIB module defines MIB objects which provide information about the Wireless Management System (WMS) in the Aruba Controller.
Contact
Postal: 1322 Crossman Avenue Sunnyvale, CA 94089 E-mail: dl-support@arubanetworks.com Phone: +1 408 227 4500
Imports
| From | Symbols |
|---|---|
| ARUBA-MIB | wlsxEnterpriseMibModules |
| ARUBA-TC | ArubaAPStatus, ArubaAccessPointMode, ArubaActiveState, ArubaAntennaSetting, ArubaAuthenticationMethods, ArubaEnableValue, ArubaEncryptionMethods, ArubaEnet1Mode, ArubaFrameType, ArubaHTExtChannel, ArubaHTMode, ArubaMeshRole, ArubaMonitorMode, ArubaPhyType, ArubaRogueApType, ArubaUnprovisionedStatus, ArubaVlanValidRange, ArubaVoipProtocolType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TEXTUAL-CONVENTION, Unsigned32, iso, snmpModules |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TAddress, TDomain, TEXTUAL-CONVENTION, TestAndIncr, TimeInterval, TruthValue |
Imported by
5 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ARUBA-MIB ARUBA-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WLSX-WLAN-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wlsxWlanConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.1 | |||
| wlsxWlanStateGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.2 | |||
| wlsxWlanAccessPointInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.2.1 | |||
| wlsxWlanTotalNumAccessPoints OBJECT-TYPE Total Number of Access Points connected to the controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.1 | Unsigned32 | read-only | current |
| wlsxWlanTotalNumStationsAssociated OBJECT-TYPE Total Number of Stations Associated to the controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.2 | Unsigned32 | read-only | current |
| wlsxWlanAPGroupTable OBJECT-TYPE This Table lists all the Access Points Groups configured in the Aruba controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3 | not-accessible | current | |
| wlsxWlanAPGroupEntry OBJECT-TYPE AP Group Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1 | not-accessible | current | |
| wlanAPGroup OBJECT-TYPE The name of an AP group | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.1 | DisplayString | not-accessible | current |
| wlanAPNumAps OBJECT-TYPE The number of APs in the AP Group | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.2 | Integer32 | read-only | current |
| wlsxWlanAPTable OBJECT-TYPE This table lists all the Access Points connected to the controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4 | not-accessible | current | |
| wlsxWlanAPEntry OBJECT-TYPE Access Point Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1 | not-accessible | current | |
| wlanAPMacAddress OBJECT-TYPE Ethernet MAC Address of the Access Point | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.1 | MacAddress | not-accessible | current |
| wlanAPIpAddress OBJECT-TYPE IP Address of the Access Point | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.2 | IpAddress | read-only | current |
| wlanAPName OBJECT-TYPE Host name of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.3 | DisplayString | read-write | current |
| wlanAPGroupName OBJECT-TYPE Group Name of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.4 | DisplayString | read-write | current |
| wlanAPModel OBJECT-TYPE Sys OID of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 | OBJECT IDENTIFIER | read-only | current |
| wlanAPSerialNumber OBJECT-TYPE Serial Number of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 | DisplayString (SIZE(0..32)) | read-only | current |
| wlanAPdot11aAntennaGain OBJECT-TYPE Configured antenna gain for 'A' Radio. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 | Integer32 | read-only | current |
| wlanAPdot11gAntennaGain OBJECT-TYPE Configured antenna gain for 'G' Radio. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 | Integer32 | read-only | current |
| wlanAPNumRadios OBJECT-TYPE Number of Radios in the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 | Integer32 | read-only | current |
| wlanAPEnet1Mode OBJECT-TYPE Enet1 Mode of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10 | ArubaEnet1Mode | read-only | current |
| wlanAPIpsecMode OBJECT-TYPE IPSEC Mode of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.11 | ArubaEnableValue | read-only | current |
| wlanAPUpTime OBJECT-TYPE Time (in hundredths of seconds) since the last time the Access Point bootstrapped with the controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.12 | TimeTicks | read-only | current |
| wlanAPModelName OBJECT-TYPE Model name of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.13 | DisplayString | read-only | current |
| wlanAPLocation OBJECT-TYPE Location of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.14 | DisplayString | read-only | current |
| wlanAPBuilding OBJECT-TYPE AP Building Number. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.15 | Integer32 | read-only | current |
| wlanAPFloor OBJECT-TYPE AP Floor Number. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.16 | Integer32 | read-only | current |
| wlanAPLoc OBJECT-TYPE AP Location. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.17 | Integer32 | read-only | current |
| wlanAPExternalAntenna OBJECT-TYPE AP Antenna Status. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.18 | ArubaAntennaSetting | read-only | current |
| wlanAPStatus OBJECT-TYPE AP Status. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.19 | ArubaAPStatus | read-only | current |
| wlanAPNumBootstraps OBJECT-TYPE Number of times the AP has bootstrapped with the controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.20 | Integer32 | read-only | current |
| wlanAPNumReboots OBJECT-TYPE Number of times the AP has rebooted. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.21 | Integer32 | read-only | current |
| wlanAPUnprovisioned OBJECT-TYPE Indicates whether the AP is unprovisioned due to lack of antenna gain or location code settings. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.22 | ArubaUnprovisionedStatus | read-only | current |
| wlanAPMonitorMode OBJECT-TYPE Indicates whether any radio on this AP is acting as an air monitor. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.23 | ArubaMonitorMode | read-only | current |
| wlanAPFQLNBuilding OBJECT-TYPE The building component of the AP's FQLN. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.24 | DisplayString | read-only | current |
| wlanAPFQLNFloor OBJECT-TYPE The floor component of the AP's FQLN. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.25 | DisplayString | read-only | current |
| wlanAPFQLN OBJECT-TYPE The AP's Fully Qualified Location Name (FQLN). | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.26 | DisplayString | read-write | current |
| wlanAPFQLNCampus OBJECT-TYPE The campus component of the AP's FQLN. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.27 | DisplayString | read-only | current |
| wlanAPLongitude OBJECT-TYPE Longitude of the AP. Signed floating-point value. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.28 | DisplayString | read-write | current |
| wlanAPLatitude OBJECT-TYPE Latitude of the AP. Signed floating-point value. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.29 | DisplayString | read-write | current |
| wlanAPAltitude OBJECT-TYPE Altitude of the AP. Signed floating-point value. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.30 | DisplayString | read-write | current |
| wlanAPMeshRole OBJECT-TYPE AP Mesh role | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.31 | ArubaMeshRole | read-write | current |
| wlanAPSysLocation OBJECT-TYPE AP sysLocation | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.32 | DisplayString | read-only | current |
| wlsxWlanRadioTable OBJECT-TYPE This table lists all the radios known to the controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5 | not-accessible | current | |
| wlsxWlanRadioEntry OBJECT-TYPE AP Radio Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1 | not-accessible | current | |
| wlanAPRadioNumber OBJECT-TYPE The radio number | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.1 | Integer32 | not-accessible | current |
| wlanAPRadioType OBJECT-TYPE Type of the Radio | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.2 | ArubaPhyType | read-write | current |
| wlanAPRadioChannel OBJECT-TYPE The channel the radio is currently operating on. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.3 | Integer32 | read-only | current |
| wlanAPRadioTransmitPower OBJECT-TYPE The current power level of the radio. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.4 | Integer32 | read-only | current |
| wlanAPRadioMode OBJECT-TYPE The Mode in which the radio is operating. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.5 | ArubaAccessPointMode | read-only | current |
| wlanAPRadioUtilization OBJECT-TYPE The Utilization of the radio as a percentage of the total capacity. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.6 | Integer32 | read-only | current |
| wlanAPRadioNumAssociatedClients OBJECT-TYPE The number of Clients associated to this radio. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.7 | Integer32 | read-only | current |
| wlanAPRadioNumMonitoredClients OBJECT-TYPE The number of Clients this Radio is monitoring. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.8 | Integer32 | read-only | current |
| wlanAPRadioNumActiveBSSIDs OBJECT-TYPE The number of active BSSIDs on this Radio. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.9 | Integer32 | read-only | current |
| wlanAPRadioNumMonitoredBSSIDs OBJECT-TYPE The number of AP BSSIDs this radio is monitoring. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.10 | Integer32 | read-only | current |
| wlanAPRadioBearing OBJECT-TYPE Antenna Bearing in degrees from True North. Unsigned floating-point value. Range: 0-360. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.11 | DisplayString | read-write | current |
| wlanAPRadioTiltAngle OBJECT-TYPE Tilt angle of antenna in degrees. -ve for downtilt, +ve for uptilt. Signed floating-point value. Range: -90 to +90. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.12 | DisplayString | read-write | current |
| wlanAPRadioHTMode OBJECT-TYPE The HT mode of the radio, if any. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.13 | ArubaHTMode | read-only | current |
| wlanAPRadioHTExtChannel OBJECT-TYPE Indicates the offset of the 40MHz extension channel, if any. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.14 | ArubaHTExtChannel | read-only | current |
| wlanAPRadioHTChannel OBJECT-TYPE A display string indicating the current channel. If wlanAPRadioHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or '-' respectively. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.15 | DisplayString | read-write | current |
| wlanAPRadioAPName OBJECT-TYPE Name of the AP the radio belongs to | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.16 | DisplayString | read-write | current |
| wlsxWlanAPBssidTable OBJECT-TYPE This table lists all the BSSIDs active on this controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7 | not-accessible | current | |
| wlsxWlanAPBssidEntry OBJECT-TYPE BSSID Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1 | not-accessible | current | |
| wlanAPBSSID OBJECT-TYPE The MAC address of the Access Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.1 | MacAddress | not-accessible | current |
| wlanAPESSID OBJECT-TYPE ESSID this BSSID is advertising. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.2 | DisplayString (SIZE(0..64)) | read-only | current |
| wlanAPBssidSlot OBJECT-TYPE Slot to which the Access Point is connected. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.3 | Unsigned32 | read-only | current |
| wlanAPBssidPort OBJECT-TYPE Port to which the Access Point is connected. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.4 | Unsigned32 | read-only | current |
| wlanAPBssidPhyType OBJECT-TYPE Physical Layer Protocol support of the AP. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.5 | ArubaPhyType | read-only | current |
| wlanAPBssidRogueType OBJECT-TYPE The type of the Rogue. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.6 | ArubaRogueApType | read-only | current |
| wlanAPBssidMode OBJECT-TYPE Indicates whether the Access point is an Air Monitor or regular AP or Mesh Portal or Mesh Point. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.7 | INTEGER {ap(1), am(2), mpp(3), mp(4)} | read-only | current |
| wlanAPBssidChannel OBJECT-TYPE The current operating channel. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.8 | INTEGER (1..165) | read-only | current |
| wlanAPBssidUpTime OBJECT-TYPE Time (in hundredths of seconds) since the tunnel was created between the access point and controller | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.9 | TimeTicks | read-only | current |
| wlanAPBssidInactiveTime OBJECT-TYPE Time (in hundredths of seconds) since any activity took place on the BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.10 | TimeTicks | read-only | current |
| wlanAPBssidLoadBalancing OBJECT-TYPE Indicates whether load balancing is enabled or not. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.11 | TruthValue | read-only | current |
| wlanAPBssidNumAssociatedStations OBJECT-TYPE Indicates the number of stations associated to this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.12 | Unsigned32 | read-only | current |
| wlanAPBssidAPMacAddress OBJECT-TYPE Indicates the Access Point to which this BSSID belongs. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.13 | MacAddress | read-only | current |
| wlanAPBssidPhyNumber OBJECT-TYPE Indicates the radio number to which this BSSID belongs. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.14 | Integer32 | read-only | current |
| wlanAPBssidHTMode OBJECT-TYPE Indicates the HT mode of this BSSID, if any. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.15 | ArubaHTMode | read-only | current |
| wlanAPBssidHTExtChannel OBJECT-TYPE Indicates the offset of the 40MHz extension channel, if any. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.16 | ArubaHTExtChannel | read-only | current |
| wlanAPBssidHTChannel OBJECT-TYPE A display string indicating the current channel. If wlanAPBssidHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or '-' respectively. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.17 | DisplayString | read-only | current |
| wlanAPBssidModule OBJECT-TYPE Module to which the Access Point is connected. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.18 | Unsigned32 | read-only | current |
| wlsxWlanESSIDTable OBJECT-TYPE This Table lists all the ESSIDs advertised by this controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8 | not-accessible | current | |
| wlsxWlanESSIDEntry OBJECT-TYPE ESSID Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1 | not-accessible | current | |
| wlanESSID OBJECT-TYPE The ESSID being advertised. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.1 | DisplayString (SIZE(0..64)) | not-accessible | current |
| wlanESSIDNumStations OBJECT-TYPE The number of stations connected to this ESSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.2 | Unsigned32 | read-only | current |
| wlanESSIDNumAccessPointsUp OBJECT-TYPE The number of APs currently advertising this ESSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.3 | Unsigned32 | read-only | current |
| wlanESSIDNumAccessPointsDown OBJECT-TYPE The number of APs configured to advertise this ESSID that are not currently operational. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.4 | Unsigned32 | read-only | current |
| wlanESSIDEncryptionType OBJECT-TYPE The encryption methods supported on this ESSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.5 | ArubaEncryptionMethods | read-only | current |
| wlsxWlanESSIDVlanPoolTable OBJECT-TYPE This Table lists all the VLANs associated with this ESSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9 | not-accessible | current | |
| wlsxWlanESSIDVlanPoolEntry OBJECT-TYPE ESSID Vlan Pool Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1 | not-accessible | current | |
| wlanESSIDVlanId OBJECT-TYPE VLAN which is part of the VLAN pool for this ESSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.1 | Unsigned32 | not-accessible | current |
| wlanESSIDVlanPoolStatus OBJECT-TYPE Row status object used to indicate the status of the row. | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.2 | RowStatus | read-create | current |
| wlsxWlanStationInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.2.2 | |||
| wlsxWlanStationTable OBJECT-TYPE This Table lists all the wireless stations associated with the Access points connected to this controller. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1 | not-accessible | current | |
| wlsxWlanStationEntry OBJECT-TYPE Station Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1 | not-accessible | current | |
| wlanStaPhyAddress OBJECT-TYPE The Physical Address of the Station. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.1 | MacAddress | not-accessible | current |
| wlanStaApBssid OBJECT-TYPE The Access point to which this station last associated to. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.2 | MacAddress | not-accessible | current |
| wlanStaPhyType OBJECT-TYPE Type of the Station. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.3 | ArubaPhyType | read-only | current |
| wlanStaIsAuthenticated OBJECT-TYPE Indicates whether the station is authenticated. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.4 | TruthValue | read-only | current |
| wlanStaIsAssociated OBJECT-TYPE Indicates whether the station is associated. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.5 | TruthValue | read-only | current |
| wlanStaChannel OBJECT-TYPE Channel on which the station is associated. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.6 | INTEGER (1..165) | read-only | current |
| wlanStaVlanId OBJECT-TYPE VLAN in which the station is present. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.7 | ArubaVlanValidRange | read-only | current |
| wlanStaVOIPState OBJECT-TYPE The State of VoIP for this station. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.8 | TruthValue | read-only | current |
| wlanStaVOIPProtocol OBJECT-TYPE If VoIP is enabled, the type of the protocol supported. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.9 | ArubaVoipProtocolType | read-only | current |
| wlanStaTransmitRate OBJECT-TYPE Transmit rate with which the Station is associated with this system. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.10 | Unsigned32 | read-only | current |
| wlanStaAssociationID OBJECT-TYPE AID with which the Station is associated with this system. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.11 | Unsigned32 | read-only | current |
| wlanStaAccessPointESSID OBJECT-TYPE ESSID of the Access point | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.12 | DisplayString (SIZE(0..64)) | read-only | current |
| wlanStaPhyNumber OBJECT-TYPE Radio PHY number to which the station is associated | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.13 | Integer32 | read-only | current |
| wlanStaRSSI OBJECT-TYPE Signal to Noise ratio for the station. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.14 | Integer32 | read-only | current |
| wlanStaUpTime OBJECT-TYPE Time since the station associated to the current BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.15 | TimeTicks | read-only | current |
| wlanStaHTMode OBJECT-TYPE The HT status of the station. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.16 | ArubaHTMode | read-only | current |
| wlsxWlanStaAssociationFailureTable OBJECT-TYPE This Table lists all the stations and the BSSID's to which they failed to associate. Once a station successfully associates, association failure entries are not reported for that station. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2 | not-accessible | current | |
| wlsxWlanStaAssociationFailureEntry OBJECT-TYPE Station Association Failure Entry | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1 | not-accessible | current | |
| wlanStaAssocFailureApName OBJECT-TYPE Name of the Access Point to which this station tried to associate. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.1 | DisplayString (SIZE(0..64)) | read-only | current |
| wlanStaAssocFailureApEssid OBJECT-TYPE ESSID to which the station association failed. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.2 | DisplayString (SIZE(0..64)) | read-only | current |
| wlanStaAssocFailurePhyNum OBJECT-TYPE Radio PHY number to which the station tried to associate. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.3 | Integer32 | read-only | current |
| wlanStaAssocFailurePhyType OBJECT-TYPE Radio PHY Type of the Station. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.4 | ArubaPhyType | read-only | current |
| wlanStaAssocFailureElapsedTime OBJECT-TYPE Elapsed time in timeticks after the station's failure to associate. | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.5 | TimeTicks | read-only | current |
| wlanStaAssocFailureReason OBJECT-TYPE Reason for the Station association failure | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.6 | DisplayString (SIZE(0..80)) | read-only | current |
| wlsxWlanAssociationInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.2.3 | |||
| wlsxWlanStatsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.3 | |||
| wlsxWlanAccessPointStatsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.3.1 | |||
| wlsxWlanAPStatsTable OBJECT-TYPE This Table lists the statistics of all the Access Points connected to the controller. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1 | not-accessible | current | |
| wlsxWlanAPStatsEntry OBJECT-TYPE Access Point Stats entry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1 | not-accessible | current | |
| wlanAPCurrentChannel OBJECT-TYPE The channel the AP is currently using. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1 | Unsigned32 | read-only | current |
| wlanAPNumClients OBJECT-TYPE The number of clients associated to this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.2 | Integer32 | read-only | current |
| wlanAPTxPkts OBJECT-TYPE The number of packets transmitted on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.3 | Counter32 | read-only | current |
| wlanAPTxBytes OBJECT-TYPE The number of bytes transmitted on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.4 | Counter32 | read-only | current |
| wlanAPRxPkts OBJECT-TYPE The number of packets received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.5 | Counter32 | read-only | current |
| wlanAPRxBytes OBJECT-TYPE The number of bytes received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.6 | Counter32 | read-only | current |
| wlanAPTxDeauthentications OBJECT-TYPE The number of deauthentications transmitted on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.7 | Counter32 | read-only | current |
| wlanAPRxDeauthentications OBJECT-TYPE The number of deauthentications received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.8 | Counter32 | read-only | current |
| wlanAPChannelThroughput OBJECT-TYPE The throughput achieved on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.9 | Integer32 | read-only | current |
| wlanAPFrameRetryRate OBJECT-TYPE The number of retry packets as a percentage of the total packets transmitted and received by this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.10 | Integer32 | read-only | current |
| wlanAPFrameLowSpeedRate OBJECT-TYPE The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this BSSID | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.11 | Integer32 | read-only | current |
| wlanAPFrameNonUnicastRate OBJECT-TYPE The number of broadcast and multicast packets as a percentage of the total packets transmitted on this BSSIDchannel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.12 | Integer32 | read-only | current |
| wlanAPFrameFragmentationRate OBJECT-TYPE The number of fragments as a percentage of the total packets transmitted by this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.13 | Integer32 | read-only | current |
| wlanAPFrameBandwidthRate OBJECT-TYPE The bandwidth of this BSSID in Kbps. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.14 | Integer32 | read-only | current |
| wlanAPFrameRetryErrorRate OBJECT-TYPE The number of error packets as a percentage of the total packets received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.15 | Integer32 | read-only | current |
| wlanAPChannelErrorRate OBJECT-TYPE The number of error packets as a percentage of the total packets received on the current channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.16 | Integer32 | read-only | current |
| wlanAPFrameReceiveErrorRate OBJECT-TYPE The number of error packets as a percentage of the total packets received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.17 | Integer32 | read-only | current |
| wlanAPRxDataPkts OBJECT-TYPE The number of packets received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.18 | Counter32 | read-only | deprecated |
| wlanAPRxDataBytes OBJECT-TYPE The number of bytes received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.19 | Counter32 | read-only | deprecated |
| wlanAPTxDataPkts OBJECT-TYPE The number of packets transmitted on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.20 | Counter32 | read-only | deprecated |
| wlanAPTxDataBytes OBJECT-TYPE The number of bytes transmitted on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.21 | Counter32 | read-only | deprecated |
| wlanAPRxDataPkts64 OBJECT-TYPE The number of packets received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.22 | Counter64 | read-only | current |
| wlanAPRxDataBytes64 OBJECT-TYPE The number of bytes received on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.23 | Counter64 | read-only | current |
| wlanAPTxDataPkts64 OBJECT-TYPE The number of packets transmitted on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.24 | Counter64 | read-only | current |
| wlanAPTxDataBytes64 OBJECT-TYPE The number of bytes transmitted on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.25 | Counter64 | read-only | current |
| wlsxWlanAPRateStatsTable OBJECT-TYPE This table contains all the AP Packet and Byte Counts but represented in terms of rate categories. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2 | not-accessible | current | |
| wlsxWlanAPRateStatsEntry OBJECT-TYPE Data rate based packet and byte count entry for an AP | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1 | not-accessible | current | |
| wlanAPStatsTotPktsAt1Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 1Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.1 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt1Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 1Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.2 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt2Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 2Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.3 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt2Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 2Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.4 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt5Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 5Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.5 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt5Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 5Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.6 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt11Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 11Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.7 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt11Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 11Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.8 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt6Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 6Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.9 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt6Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 6Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.10 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt12Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 12Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.11 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt12Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 12Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.12 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt18Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 18Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.13 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt18Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 18Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.14 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt24Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 24Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.15 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt24Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 24Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.16 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt36Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 36Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.17 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt36Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 36Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.18 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt48Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 48Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.19 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt48Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 48Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.20 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt54Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 54Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.21 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt54Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 54Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.22 | Counter32 | read-only | current |
| wlanAPStatsTotPktsAt9Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this BSSID at 9Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.23 | Counter32 | read-only | current |
| wlanAPStatsTotBytesAt9Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this BSSID at 9Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.24 | Counter32 | read-only | current |
| wlsxWlanAPDATypeStatsTable OBJECT-TYPE This table contains all the per BSSID Packet and Byte Counts but broken down in terms of Destination Address Type. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3 | not-accessible | current | |
| wlsxWlanAPDATypeStatsEntry OBJECT-TYPE Destination Address based packet and byte count entry for an AP | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1 | not-accessible | current | |
| wlanAPStatsTotDABroadcastPkts OBJECT-TYPE This attribute indicates the total number of Broadcast packets observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.1 | Counter32 | read-only | current |
| wlanAPStatsTotDABroadcastBytes OBJECT-TYPE This attribute indicates the total number of Broadcast Bytes observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.2 | Counter32 | read-only | current |
| wlanAPStatsTotDAMulticastPkts OBJECT-TYPE This attribute indicates the total number of Multicast packets observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.3 | Counter32 | read-only | current |
| wlanAPStatsTotDAMulticastBytes OBJECT-TYPE This attribute indicates the total number of Multicast Bytes observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.4 | Counter32 | read-only | current |
| wlanAPStatsTotDAUnicastPkts OBJECT-TYPE This attribute indicates the total number of Unicast packets observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.5 | Counter32 | read-only | current |
| wlanAPStatsTotDAUnicastBytes OBJECT-TYPE This attribute indicates the total number of Unicast Bytes observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.6 | Counter32 | read-only | current |
| wlsxWlanAPFrameTypeStatsTable OBJECT-TYPE This table contains all the per BSSID Packet and Byte Counts but broken down into different Frame Types. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4 | not-accessible | current | |
| wlsxWlanAPFrameTypeStatsEntry OBJECT-TYPE Frame Type based packet and byte count entry for an AP | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1 | not-accessible | current | |
| wlanAPStatsTotMgmtPkts OBJECT-TYPE This attribute indicates the total number of Management packets observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.1 | Counter32 | read-only | current |
| wlanAPStatsTotMgmtBytes OBJECT-TYPE This attribute indicates the total number of Management Bytes observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.2 | Counter32 | read-only | current |
| wlanAPStatsTotCtrlPkts OBJECT-TYPE This attribute indicates the total number of Control packets observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.3 | Counter32 | read-only | current |
| wlanAPStatsTotCtrlBytes OBJECT-TYPE This attribute indicates the total number of Control Bytes observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.4 | Counter32 | read-only | current |
| wlanAPStatsTotDataPkts OBJECT-TYPE This attribute indicates the total number of Data packets observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.5 | Counter32 | read-only | current |
| wlanAPStatsTotDataBytes OBJECT-TYPE This attribute indicates the total number of Data Bytes observed on this BSSID. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.6 | Counter32 | read-only | current |
| wlsxWlanAPPktSizeStatsTable OBJECT-TYPE This table contains all the per BSSID Packet Count but broken down into different Packet Sizes. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5 | not-accessible | current | |
| wlsxWlanAPPktSizeStatsEntry OBJECT-TYPE Packet Size based packet count entry for a BSSID | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1 | not-accessible | current | |
| wlanAPStatsPkts63Bytes OBJECT-TYPE This attribute indicates the total number of packets that were less than 64 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.1 | Counter32 | read-only | current |
| wlanAPStatsPkts64To127 OBJECT-TYPE This attribute indicates the total number of packets that were between 64 and 127 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.2 | Counter32 | read-only | current |
| wlanAPStatsPkts128To255 OBJECT-TYPE This attribute indicates the total number of packets that were between 128 and 255 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.3 | Counter32 | read-only | current |
| wlanAPStatsPkts256To511 OBJECT-TYPE This attribute indicates the total number of packets that were between 256 and 511 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.4 | Counter32 | read-only | current |
| wlanAPStatsPkts512To1023 OBJECT-TYPE This attribute indicates the total number of packets that were between 512 and 1023 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.5 | Counter32 | read-only | current |
| wlanAPStatsPkts1024To1518 OBJECT-TYPE This attribute indicates the total number of packets that were between 1024 and 1518 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.6 | Counter32 | read-only | current |
| wlsxWlanAPChStatsTable OBJECT-TYPE This Table lists the Channel statistics of all the Access Points connected to the controller. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6 | not-accessible | current | |
| wlsxWlanAPChStatsEntry OBJECT-TYPE Access Point Channel Stats entry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1 | not-accessible | current | |
| wlanAPChannelNumber OBJECT-TYPE The channel the AP is currently using. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.1 | INTEGER (1..165) | read-only | current |
| wlanAPChNumStations OBJECT-TYPE This attribute indicates the number of stations using this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.2 | Integer32 | read-only | current |
| wlanAPChTotPkts OBJECT-TYPE This attribute indicates the total packets observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.3 | Counter32 | read-only | current |
| wlanAPChTotBytes OBJECT-TYPE This attribute indicates the total Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.4 | Counter32 | read-only | current |
| wlanAPChTotRetryPkts OBJECT-TYPE This attribute indicates the total Retry Packets observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.5 | Counter32 | read-only | current |
| wlanAPChTotFragmentedPkts OBJECT-TYPE This attribute indicates the total Fragmented Packets observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.6 | Counter32 | read-only | current |
| wlanAPChTotPhyErrPkts OBJECT-TYPE This attribute indicates the total Physical Error Packets observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.7 | Counter32 | read-only | current |
| wlanAPChTotMacErrPkts OBJECT-TYPE This attribute indicates the total Mac errors packets observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.8 | Counter32 | read-only | current |
| wlanAPChNoise OBJECT-TYPE This attribute indicates the noise observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.9 | Integer32 | read-only | current |
| wlanAPChCoverageIndex OBJECT-TYPE This attribute indicates the coverage provided by the AP on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.10 | Integer32 | read-only | current |
| wlanAPChInterferenceIndex OBJECT-TYPE This attribute indicates the interference observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.11 | Integer32 | read-only | current |
| wlanAPChFrameRetryRate OBJECT-TYPE The number of retry packets as a percentage of the total packets transmitted and received on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.12 | Integer32 | read-only | current |
| wlanAPChFrameLowSpeedRate OBJECT-TYPE The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received on this channel | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.13 | Integer32 | read-only | current |
| wlanAPChFrameNonUnicastRate OBJECT-TYPE The number of broadcast and multicast packets as a percentage of the total packets transmitted on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.14 | Integer32 | read-only | current |
| wlanAPChFrameFragmentationRate OBJECT-TYPE The number of fragments as a percentage of the total packets transmitted on this channel | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.15 | Integer32 | read-only | current |
| wlanAPChFrameBandwidthRate OBJECT-TYPE The bandwidth of this channel in Kbps. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.16 | Integer32 | read-only | current |
| wlanAPChFrameRetryErrorRate OBJECT-TYPE The number of error packets as a percentage of the total packets received on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.17 | Integer32 | read-only | deprecated |
| wlanAPChBusyRate OBJECT-TYPE This attribute indicates the busy this channel is. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.18 | Integer32 | read-only | current |
| wlanAPChNumAPs OBJECT-TYPE This attribute indicates the number of Access Points observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.19 | Integer32 | read-only | current |
| wlanAPChFrameReceiveErrorRate OBJECT-TYPE The number of error packets as a percentage of the total packets received on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.20 | Integer32 | read-only | current |
| wlanAPChTransmittedFragmentCount OBJECT-TYPE This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.21 | Counter32 | read-only | current |
| wlanAPChMulticastTransmittedFrameCount OBJECT-TYPE This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.22 | Counter32 | read-only | current |
| wlanAPChFailedCount OBJECT-TYPE This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or dot11LongRetryLimit. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.23 | Counter32 | read-only | current |
| wlanAPChRetryCount OBJECT-TYPE This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.24 | Counter32 | read-only | current |
| wlanAPChMultipleRetryCount OBJECT-TYPE This counter shall increment when an MSDU is successfully transmitted after more than one retransmission. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.25 | Counter32 | read-only | current |
| wlanAPChFrameDuplicateCount OBJECT-TYPE This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.26 | Counter32 | read-only | current |
| wlanAPChRTSSuccessCount OBJECT-TYPE This counter shall increment when a CTS is received in response to an RTS. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.27 | Counter32 | read-only | current |
| wlanAPChRTSFailureCount OBJECT-TYPE This counter shall increment when a CTS is not received in response to an RTS. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.28 | Counter32 | read-only | current |
| wlanAPChACKFailureCount OBJECT-TYPE This counter shall increment when an ACK is not received when expected. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.29 | Counter32 | read-only | current |
| wlanAPChReceivedFragmentCount OBJECT-TYPE This counter shall be incremented for each successfully received MPDU of type Data or Management. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.30 | Counter32 | read-only | current |
| wlanAPChMulticastReceivedFrameCount OBJECT-TYPE This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.31 | Counter32 | read-only | current |
| wlanAPChFCSErrorCount OBJECT-TYPE This counter shall increment when an FCS error is detected in a received MPDU. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.32 | Counter32 | read-only | current |
| wlanAPChTransmittedFrameCount OBJECT-TYPE This counter shall increment for each successfully transmitted MSDU. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.33 | Counter32 | read-only | current |
| wlanAPChWEPUndecryptableCount OBJECT-TYPE This counter shall increment when a frame is received with the Protected Frame subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the transmitter's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.34 | Counter32 | read-only | current |
| wlanAPChRxUtilization OBJECT-TYPE This is the percentage of time spent by the radio in receiving packets. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.35 | INTEGER (0..100) | read-only | current |
| wlanAPChTxUtilization OBJECT-TYPE This is the percentage of time spent by the radio in transmitting packets. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.36 | INTEGER (0..100) | read-only | current |
| wlanAPChUtilization OBJECT-TYPE This is the percentage of time the channel is busy. | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.37 | INTEGER (0..100) | read-only | current |
| wlsxWlanStationStatsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.2.1.5.3.2 | |||
| wlsxWlanStationStatsTable OBJECT-TYPE This Table lists statistics of all the wireless stations associated with an AP connected to this controller. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1 | not-accessible | current | |
| wlsxWlanStationStatsEntry OBJECT-TYPE Station Stats Entry | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1 | not-accessible | current | |
| wlanStaChannelNum OBJECT-TYPE The channel the station is currently using. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.1 | Unsigned32 | read-only | current |
| wlanStaTxPkts OBJECT-TYPE The number of packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.2 | Counter32 | read-only | current |
| wlanStaTxBytes OBJECT-TYPE The number of bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.3 | Counter32 | read-only | current |
| wlanStaRxPkts OBJECT-TYPE The number of packets received by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.4 | Counter32 | read-only | current |
| wlanStaRxBytes OBJECT-TYPE The number of bytes received by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.5 | Counter32 | read-only | current |
| wlanStaTxBCastPkts OBJECT-TYPE The number of broadcast packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.6 | Counter32 | read-only | current |
| wlanStaRxBCastBytes OBJECT-TYPE The number of broadcast bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.7 | Counter32 | read-only | deprecated |
| wlanStaTxMCastPkts OBJECT-TYPE The number of multicast packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.8 | Counter32 | read-only | current |
| wlanStaRxMCastBytes OBJECT-TYPE The number of multicast bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.9 | Counter32 | read-only | deprecated |
| wlanStaDataPkts OBJECT-TYPE The total number of Data packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.10 | Counter32 | read-only | current |
| wlanStaCtrlPkts OBJECT-TYPE The total number of Control packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.11 | Counter32 | read-only | current |
| wlanStaNumAssocRequests OBJECT-TYPE The number of Association requests transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.12 | Counter32 | read-only | current |
| wlanStaNumAuthRequests OBJECT-TYPE The number of Authentication requests transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.13 | Counter32 | read-only | current |
| wlanStaTxDeauthentications OBJECT-TYPE The number of Deauthentication frames transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.14 | Counter32 | read-only | current |
| wlanStaRxDeauthentications OBJECT-TYPE The number of Deauthentication frames received by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.15 | Counter32 | read-only | current |
| wlanStaFrameRetryRate OBJECT-TYPE The number of retry packets as a percentage of the total packets transmitted and received by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.16 | Integer32 | read-only | current |
| wlanStaFrameLowSpeedRate OBJECT-TYPE The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.17 | Integer32 | read-only | current |
| wlanStaFrameNonUnicastRate OBJECT-TYPE The number of broadcast and multicast packets as a percentage of the total packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.18 | Integer32 | read-only | current |
| wlanStaFrameFragmentationRate OBJECT-TYPE The number of fragments as a percentage of the total packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.19 | Integer32 | read-only | current |
| wlanStaFrameBandwidthRate OBJECT-TYPE The bandwidth of this station in Kbps. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.20 | Integer32 | read-only | current |
| wlanStaFrameRetryErrorRate OBJECT-TYPE The number of error packets as a percentage of the total packets received by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.21 | Integer32 | read-only | deprecated |
| wlanStaFrameReceiveErrorRate OBJECT-TYPE The number of error packets as a percentage of the total packets received by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.22 | Integer32 | read-only | current |
| wlanStaTxBCastBytes OBJECT-TYPE The number of broadcast bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.23 | Counter32 | read-only | current |
| wlanStaTxMCastBytes OBJECT-TYPE The number of multicast bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.24 | Counter32 | read-only | current |
| wlanStaTxBytes64 OBJECT-TYPE The number of bytes transmitted by this station, 64-bit value | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.25 | Counter64 | read-only | current |
| wlanStaRxBytes64 OBJECT-TYPE The number of bytes received by this station, 64-bit value | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.26 | Counter64 | read-only | current |
| wlsxWlanStaRateStatsTable OBJECT-TYPE This table contains all the Packet and Byte Counts for a station represented in terms of rate categories. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2 | not-accessible | current | |
| wlsxWlanStaRateStatsEntry OBJECT-TYPE Data rate based packet and byte count entry for a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1 | not-accessible | current | |
| wlanStaTxPktsAt1Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.1 | Counter32 | read-only | current |
| wlanStaTxBytesAt1Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.2 | Counter32 | read-only | current |
| wlanStaTxPktsAt2Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.3 | Counter32 | read-only | current |
| wlanStaTxBytesAt2Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.4 | Counter32 | read-only | current |
| wlanStaTxPktsAt5Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.5 | Counter32 | read-only | current |
| wlanStaTxBytesAt5Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.6 | Counter32 | read-only | current |
| wlanStaTxPktsAt11Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.7 | Counter32 | read-only | current |
| wlanStaTxBytesAt11Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.8 | Counter32 | read-only | current |
| wlanStaTxPktsAt6Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.9 | Counter32 | read-only | current |
| wlanStaTxBytesAt6Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.10 | Counter32 | read-only | current |
| wlanStaTxPktsAt12Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.11 | Counter32 | read-only | current |
| wlanStaTxBytesAt12Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.12 | Counter32 | read-only | current |
| wlanStaTxPktsAt18Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.13 | Counter32 | read-only | current |
| wlanStaTxBytesAt18Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.14 | Counter32 | read-only | current |
| wlanStaTxPktsAt24Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.15 | Counter32 | read-only | current |
| wlanStaTxBytesAt24Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.16 | Counter32 | read-only | current |
| wlanStaTxPktsAt36Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.17 | Counter32 | read-only | current |
| wlanStaTxBytesAt36Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.18 | Counter32 | read-only | current |
| wlanStaTxPktsAt48Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.19 | Counter32 | read-only | current |
| wlanStaTxBytesAt48Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.20 | Counter32 | read-only | current |
| wlanStaTxPktsAt54Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.21 | Counter32 | read-only | current |
| wlanStaTxBytesAt54Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.22 | Counter32 | read-only | current |
| wlanStaRxPktsAt1Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.23 | Counter32 | read-only | current |
| wlanStaRxBytesAt1Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.24 | Counter32 | read-only | current |
| wlanStaRxPktsAt2Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.25 | Counter32 | read-only | current |
| wlanStaRxBytesAt2Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.26 | Counter32 | read-only | current |
| wlanStaRxPktsAt5Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.27 | Counter32 | read-only | current |
| wlanStaRxBytesAt5Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.28 | Counter32 | read-only | current |
| wlanStaRxPktsAt11Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.29 | Counter32 | read-only | current |
| wlanStaRxBytesAt11Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.30 | Counter32 | read-only | current |
| wlanStaRxPktsAt6Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.31 | Counter32 | read-only | current |
| wlanStaRxBytesAt6Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.32 | Counter32 | read-only | current |
| wlanStaRxPktsAt12Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.33 | Counter32 | read-only | current |
| wlanStaRxBytesAt12Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.34 | Counter32 | read-only | current |
| wlanStaRxPktsAt18Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.35 | Counter32 | read-only | current |
| wlanStaRxBytesAt18Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.36 | Counter32 | read-only | current |
| wlanStaRxPktsAt24Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.37 | Counter32 | read-only | current |
| wlanStaRxBytesAt24Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.38 | Counter32 | read-only | current |
| wlanStaRxPktsAt36Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.39 | Counter32 | read-only | current |
| wlanStaRxBytesAt36Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.40 | Counter32 | read-only | current |
| wlanStaRxPktsAt48Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.41 | Counter32 | read-only | current |
| wlanStaRxBytesAt48Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.42 | Counter32 | read-only | current |
| wlanStaRxPktsAt54Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.43 | Counter32 | read-only | current |
| wlanStaRxBytesAt54Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.44 | Counter32 | read-only | current |
| wlanStaTxPktsAt9Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 9Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.45 | Counter32 | read-only | current |
| wlanStaTxBytesAt9Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 9Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.46 | Counter32 | read-only | current |
| wlanStaRxPktsAt9Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 9Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.47 | Counter32 | read-only | current |
| wlanStaRxBytesAt9Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 9Mbps rate. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.48 | Counter32 | read-only | current |
| wlsxWlanStaDATypeStatsTable OBJECT-TYPE This table contains all the Packet and Byte Counts for a station but but broken down in terms of Destination Address Type. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3 | not-accessible | current | |
| wlsxWlanStaDATypeStatsEntry OBJECT-TYPE Destination Address based packet and byte count entry for a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1 | not-accessible | current | |
| wlanStaTxDABroadcastPkts OBJECT-TYPE This attribute indicates the number of Broadcast packets transmitted by this Station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.1 | Counter32 | read-only | current |
| wlanStaTxDABroadcastBytes OBJECT-TYPE This attribute indicates the number of Broadcast Bytes transmitted by this Station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.2 | Counter32 | read-only | current |
| wlanStaTxDAMulticastPkts OBJECT-TYPE This attribute indicates the number of Multicast packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.3 | Counter32 | read-only | current |
| wlanStaTxDAMulticastBytes OBJECT-TYPE This attribute indicates the number of Multicast Bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.4 | Counter32 | read-only | current |
| wlanStaTxDAUnicastPkts OBJECT-TYPE This attribute indicates the total of Unicast packets transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.5 | Counter32 | read-only | current |
| wlanStaTxDAUnicastBytes OBJECT-TYPE This attribute indicates the total of Unicast Bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.6 | Counter32 | read-only | current |
| wlsxWlanStaFrameTypeStatsTable OBJECT-TYPE This table contains all the Packet and Byte Counts for stations but broken down into different Frame Types. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4 | not-accessible | current | |
| wlsxWlanStaFrameTypeStatsEntry OBJECT-TYPE Frame Type based packet and byte count entry for a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1 | not-accessible | current | |
| wlanStaTxMgmtPkts OBJECT-TYPE This attribute indicates the Transmitted Management packets from a station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.1 | Counter32 | read-only | current |
| wlanStaTxMgmtBytes OBJECT-TYPE This attribute indicates the Transmitted Management Bytes from a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.2 | Counter32 | read-only | current |
| wlanStaTxCtrlPkts OBJECT-TYPE This attribute indicates the Transmitted Control packets from a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.3 | Counter32 | read-only | current |
| wlanStaTxCtrlBytes OBJECT-TYPE This attribute indicates the Transmitted Control Bytes from a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.4 | Counter32 | read-only | current |
| wlanStaTxDataPkts OBJECT-TYPE This attribute indicates the Transmitted Data packets from a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.5 | Counter32 | read-only | current |
| wlanStaTxDataBytes OBJECT-TYPE This attribute indicates the Transmitted Data Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.6 | Counter32 | read-only | current |
| wlanStaRxMgmtPkts OBJECT-TYPE This attribute indicates the number of received Management packets at a station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.7 | Counter32 | read-only | current |
| wlanStaRxMgmtBytes OBJECT-TYPE This attribute indicates the number of received Management Bytes at a station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.8 | Counter32 | read-only | current |
| wlanStaRxCtrlPkts OBJECT-TYPE This attribute indicates the number of received Control packets at a station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.9 | Counter32 | read-only | current |
| wlanStaRxCtrlBytes OBJECT-TYPE This attribute indicates the number of received Control Bytes at a station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.10 | Counter32 | read-only | current |
| wlanStaRxDataPkts OBJECT-TYPE This attribute indicates the number of received Data packets at a station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.11 | Counter32 | read-only | current |
| wlanStaRxDataBytes OBJECT-TYPE This attribute indicates the number of received Data Bytes at a station. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.12 | Counter32 | read-only | current |
| wlsxWlanStaPktSizeStatsTable OBJECT-TYPE This table contains all the Packet and Byte Counts for stations but broken down into different Packet Sizes. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5 | not-accessible | current | |
| wlsxWlanStaPktSizeStatsEntry OBJECT-TYPE Packet Size based packet count entry for a station | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1 | not-accessible | current | |
| wlanStaTxPkts63Bytes OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.1 | Counter32 | read-only | current |
| wlanStaTxPkts64To127 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.2 | Counter32 | read-only | current |
| wlanStaTxPkts128To255 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.3 | Counter32 | read-only | current |
| wlanStaTxPkts256To511 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.4 | Counter32 | read-only | current |
| wlanStaTxPkts512To1023 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.5 | Counter32 | read-only | current |
| wlanStaTxPkts1024To1518 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.6 | Counter32 | read-only | current |
| wlanStaRxPkts63Bytes OBJECT-TYPE This attribute indicates the number of packets Received by the station that were less than 64 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.7 | Counter32 | read-only | current |
| wlanStaRxPkts64To127 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.8 | Counter32 | read-only | current |
| wlanStaRxPkts128To255 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.9 | Counter32 | read-only | current |
| wlanStaRxPkts256To511 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.10 | Counter32 | read-only | current |
| wlanStaRxPkts512To1023 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.11 | Counter32 | read-only | current |
| wlanStaRxPkts1024To1518 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.12 | Counter32 | read-only | current |