WLSX-TRAP-MIB
- Registered at
- 1.3.6.1.4.1.14823.2.3.1.11
- Last updated
- 1921-06-01 19:26
- Organization
- Aruba, a Hewlett Packard Enterprise company
- Revisions
- 1921-06-01 19:26
- Namespace
- arubaos
- Source file
WLSX-TRAP-MIB- Digest
sha256:a9447f78abd8fd33b564778519ac267c19e1bd77ccad7c8f3e550106af85f559
Description
This MIB defines the Traps generated by the switch.
Contact
Postal: 3333 Scott Blvd, Santa Clara, CA 95054 E-mail: aruba-ext-eng-reg@hpe.com Phone: +1 408 227 4500
Imports
| From | Symbols |
|---|---|
| ARUBA-MIB | wlsrEnterpriseMibModules |
| ARUBA-TC | ArubaAPMasterStatus, ArubaAPUplinkChangeReason, ArubaAPUplinkType, ArubaARMChangeReason, ArubaAccessPointMode, ArubaAddressType, ArubaAuthenticationMethods, ArubaBlackListReason, ArubaConfigurationChangeType, ArubaConfigurationState, ArubaDBType, ArubaEnableValue, ArubaFrameType, ArubaHTExtChannel, ArubaIfState, ArubaIfStateChangeReason, ArubaOperStateValue, ArubaPortalServerDownReason, ArubaStackChangeEvent, ArubaStackIfTopoJoined, ArubaStackState, ArubaStationType, ArubaSwitchRole, ArubaThresholdResourceType, ArubaVrrpState, InterfaceIndex, TimeTicks |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TEXTUAL-CONVENTION, iso, snmpModules |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TAddress, TDomain, TEXTUAL-CONVENTION, TestAndIncr, TimeInterval, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ARUBA-MIB ARUBA-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WLSX-TRAP-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wlsxTrapsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.11.1 | |||
| wlsxTrapObjectsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.11.1.1 | |||
| wlsxTrapAPMacAddress OBJECT-TYPE This object is used in the traps to indicate the wired MAC address of an access point, for which the trap is being raised. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.1 | MacAddress | accessible-for-notify | current |
| wlsxTrapAPIpAddress OBJECT-TYPE This object is used in the traps to indicate the IP address of an access point, for which the trap is being raised. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.2 | IpAddress | accessible-for-notify | current |
| wlsxTrapAPBSSID OBJECT-TYPE This object is used in the traps to indicate the BSSID of the access point, for which the trap is being raised. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.3 | MacAddress | accessible-for-notify | current |
| wlsxTrapEssid OBJECT-TYPE This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.4 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTargetAPBSSID OBJECT-TYPE This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.5 | MacAddress | accessible-for-notify | current |
| wlsxTrapTargetAPSSID OBJECT-TYPE This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.6 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTargetAPChannel OBJECT-TYPE This object is used in the traps to indicate the channel of the access point, for which the trap is being raised. If an air monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.7 | Integer32 | accessible-for-notify | current |
| wlsxTrapNodeMac OBJECT-TYPE This object is used in the traps to indicate the MAC address of a node. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.8 | MacAddress | accessible-for-notify | current |
| wlsxTrapSourceMac OBJECT-TYPE This object is used in the traps to indicate the MAC address of the source. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.9 | MacAddress | accessible-for-notify | current |
| wlsxReceiverMac OBJECT-TYPE This object is used in the traps to indicate the MAC address of the receiver. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.10 | MacAddress | accessible-for-notify | current |
| wlsxTrapTransmitterMac OBJECT-TYPE This object is used in the traps to indicate the MAC address of the transmitter. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.11 | MacAddress | accessible-for-notify | current |
| wlsxTrapReceiverMac OBJECT-TYPE This object is used in the traps to indicate the MAC address of the receiver. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.12 | MacAddress | accessible-for-notify | current |
| wlsxTrapSnr OBJECT-TYPE This object is used in the traps to indicate the Signal to Noise ratio. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.13 | Integer32 | accessible-for-notify | current |
| wlsxTrapSignatureName OBJECT-TYPE This object is used in the traps to indicate the Signature Name. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.14 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapFrameType OBJECT-TYPE This object is used in the traps to indicate the Frame Type | 1.3.6.1.4.1.14823.2.3.1.11.1.1.15 | ArubaFrameType | accessible-for-notify | current |
| wlsxTrapAddressType OBJECT-TYPE This object is used in the traps to indicate the Address type. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.16 | ArubaAddressType | accessible-for-notify | current |
| wlsxTrapAPLocation OBJECT-TYPE This object is used in the traps to indicate the Location of the AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.17 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapAPChannel OBJECT-TYPE This object is used in the traps to indicate the Current Channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.18 | Integer32 | accessible-for-notify | current |
| wlsxTrapAPTxPower OBJECT-TYPE This object is used in the traps to indicate the AP Transmit Power. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.19 | Integer32 | accessible-for-notify | current |
| wlsxTrapMatchedMac OBJECT-TYPE This object is used in the traps to indicate the MAC address | 1.3.6.1.4.1.14823.2.3.1.11.1.1.20 | MacAddress | accessible-for-notify | current |
| wlsxTrapMatchedIp OBJECT-TYPE This object is used in the traps to indicate the IP address | 1.3.6.1.4.1.14823.2.3.1.11.1.1.21 | IpAddress | accessible-for-notify | current |
| wlsxTrapRogueIfoURL OBJECT-TYPE This object is used to point to the WEBUI Rogue AP information URL. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.22 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapVlanId OBJECT-TYPE This object is used in the traps to indicate the VLAN Id. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.23 | Integer32 | accessible-for-notify | current |
| wlsxTrapAdminStatus OBJECT-TYPE This object is used in the traps to indicate the admin status of VLAN. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.24 | ArubaEnableValue | accessible-for-notify | current |
| wlsxTrapOperStatus OBJECT-TYPE This object is used in the traps to indicate the admin status of VLAN. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.25 | ArubaOperStateValue | accessible-for-notify | current |
| wlsxTrapAuthServerName OBJECT-TYPE This object is used in the traps to indicate the Authentication Server used for Authentication. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.26 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapAuthServerTimeout OBJECT-TYPE This object is used in the traps to indicate the Authentication Server Timeout. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.27 | Integer32 | accessible-for-notify | current |
| wlsxTrapCardSlot OBJECT-TYPE This object is used in the traps to indicate the Slot in which this card is present. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.28 | Integer32 | accessible-for-notify | current |
| wlsxTrapTemperatureValue OBJECT-TYPE This object is used in the traps to indicate the Temperature Value. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.29 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapProcessName OBJECT-TYPE This object is used in the traps to indicate the Process name. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.30 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapFanNumber OBJECT-TYPE This object is used in the traps to indicate the Fan Number. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.31 | Integer32 | accessible-for-notify | current |
| wlsxTrapVoltageType OBJECT-TYPE This object is used in the traps to indicate the type of Voltage. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.32 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapVoltageValue OBJECT-TYPE This object is used in the traps to indicate the voltage value in Float. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.33 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapStationBlackListReason OBJECT-TYPE The Reason for which a station is black listed. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.34 | ArubaBlackListReason | accessible-for-notify | current |
| wlsxTrapSpoofedIpAddress OBJECT-TYPE This object is used in a trap to identify a spoofed IP address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.35 | IpAddress | accessible-for-notify | current |
| wlsxTrapSpoofedOldPhyAddress OBJECT-TYPE This object is used in a trap to identify an old MAC address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.36 | MacAddress | accessible-for-notify | current |
| wlsxTrapSpoofedNewPhyAddress OBJECT-TYPE This object is used in a trap to identify a New MAC address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.37 | MacAddress | accessible-for-notify | current |
| wlsxTrapDBName OBJECT-TYPE This object is used in a trap to identify name of the database. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.38 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapDBUserName OBJECT-TYPE This object is used in a trap to identify name of the database user. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.39 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapDBIpAddress OBJECT-TYPE This object is used in a trap to identify the IpAddress of the Database. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.40 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapDBType OBJECT-TYPE This object is used in a trap to identify the port of the user. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.41 | ArubaDBType | accessible-for-notify | current |
| wlsxTrapVrrpID OBJECT-TYPE This object contains the Virtual Router Identifier. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.42 | Integer32 | accessible-for-notify | current |
| wlsxTrapVrrpMasterIp OBJECT-TYPE This object contains the Master IP address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.43 | IpAddress | accessible-for-notify | current |
| wlsxTrapVrrpOperState OBJECT-TYPE This object represents the VRRP Operational state. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.44 | ArubaVrrpState | accessible-for-notify | current |
| wlsxTrapESIServerGrpName OBJECT-TYPE This object represents the External Services Interface (ESI) Server Group name | 1.3.6.1.4.1.14823.2.3.1.11.1.1.45 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapESIServerName OBJECT-TYPE This object represents the External Services Interface (ESI) Server Name | 1.3.6.1.4.1.14823.2.3.1.11.1.1.46 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapESIServerIpAddress OBJECT-TYPE This object represents the External Services Interface (ESI) Server IP address | 1.3.6.1.4.1.14823.2.3.1.11.1.1.47 | IpAddress | accessible-for-notify | current |
| wlsxTrapLicenseDaysRemaining OBJECT-TYPE This object represents number of the days remaining prior to a license expiry. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.48 | Integer32 | accessible-for-notify | current |
| wlsxTrapSwitchIp OBJECT-TYPE This object represents the controller IP address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.49 | IpAddress | accessible-for-notify | current |
| wlsxTrapSwitchRole OBJECT-TYPE This object represents the Role of the controller. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.50 | ArubaSwitchRole | accessible-for-notify | current |
| wlsxTrapUserIpAddress OBJECT-TYPE This object represents IP address of the User. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.51 | IpAddress | accessible-for-notify | current |
| wlsxTrapUserPhyAddress OBJECT-TYPE This object represents MAC address of the User. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.52 | MacAddress | accessible-for-notify | current |
| wlsxTrapUserName OBJECT-TYPE This object represents the user name. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.53 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapUserRole OBJECT-TYPE This object represents the Authentication method of the user. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.54 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapUserAuthenticationMethod OBJECT-TYPE This object represents the Authentication method of the user. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.55 | ArubaAuthenticationMethods | accessible-for-notify | current |
| wlsxTrapAPRadioNumber OBJECT-TYPE This object represents the radio number. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.56 | Integer32 | accessible-for-notify | current |
| wlsxTrapRogueInfoURL OBJECT-TYPE This object is used to point to the WEBGUI Rogue AP information URL. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.57 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapInterferingAPInfoURL OBJECT-TYPE This object is used to point to the WEBGUI Rogue interfering AP information URL. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.58 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapPortNumber OBJECT-TYPE This object is used in the traps to indicate the port number. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.59 | Integer32 | accessible-for-notify | current |
| wlsxTrapTime OBJECT-TYPE This object is used in all the enterprise traps to indicate the the time when the trap is generated on the controller. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.60 | DateAndTime | accessible-for-notify | current |
| wlsxTrapHostIp OBJECT-TYPE This object represents the Trap host. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.61 | IpAddress | accessible-for-notify | current |
| wlsxTrapHostPort OBJECT-TYPE This object represents the Trap host port. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.62 | Integer32 | accessible-for-notify | current |
| wlsxTrapConfigurationId OBJECT-TYPE This object represents the ID of the configuration, to be used in traps. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.63 | Integer32 | accessible-for-notify | current |
| wlsxTrapCTSURL OBJECT-TYPE This object represents the URL from which the transfer should happen. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.64 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapCTSTransferType OBJECT-TYPE This object represents the transfer type, upload or download. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.65 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapConfigurationState OBJECT-TYPE This object represents state of the configuration transfer. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.66 | ArubaConfigurationState | accessible-for-notify | current |
| wlsxTrapUpdateFailureReason OBJECT-TYPE This object represents the reason for the update failure. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.67 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapUpdateFailedObj OBJECT-TYPE This variable represents the AMAPI object which is the reason for the the update failure. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.68 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTableEntryChangeType OBJECT-TYPE This object represents type of the configuration change. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.69 | ArubaConfigurationChangeType | accessible-for-notify | current |
| wlsxTrapGlobalConfigObj OBJECT-TYPE This variable represents the AMAPI object corresponding to the global configuration change. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.70 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTableGenNumber OBJECT-TYPE This object represents generation number of a table. Used in the MMS, to keep track of the table content changes. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.71 | Integer32 | accessible-for-notify | current |
| wlsxTrapLicenseId OBJECT-TYPE This object is used in the traps to indicate the license ID. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.72 | Integer32 | accessible-for-notify | current |
| wlsxTrapConfidenceLevel OBJECT-TYPE This object is used in the traps to indicate the Confidence Level as a percentage | 1.3.6.1.4.1.14823.2.3.1.11.1.1.73 | Integer32 | accessible-for-notify | current |
| wlsxTrapMissingLicenses OBJECT-TYPE This variable indicates any licenses that are not present during a configuration update | 1.3.6.1.4.1.14823.2.3.1.11.1.1.74 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxVoiceCurrentNumCdr OBJECT-TYPE This object represents the number of CDRs in buffer. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.75 | Integer32 | accessible-for-notify | current |
| wlsxTrapTunnelId OBJECT-TYPE This Object represents the tunnel ID. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.76 | Integer32 | accessible-for-notify | current |
| wlsxTrapTunnelStatus OBJECT-TYPE This Object represents the tunnel Status. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.77 | Integer32 | accessible-for-notify | current |
| wlsxTrapTunnelUpReason OBJECT-TYPE This Object represents the tunnel up reason. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.78 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTunnelDownReason OBJECT-TYPE This Object represents the tunnel down reason. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.79 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapApSerialNumber OBJECT-TYPE This object represents the AP Serial Number. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.80 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTimeStr OBJECT-TYPE This object represents the Time in String format. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.81 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapMasterIp OBJECT-TYPE This object represents the master IP address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.82 | IpAddress | accessible-for-notify | current |
| wlsxTrapLocalIp OBJECT-TYPE This object represents the Local IP address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.83 | IpAddress | accessible-for-notify | current |
| wlsxTrapMasterName OBJECT-TYPE This object represents the master controller name. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.84 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapLocalName OBJECT-TYPE This object represents the local controller name. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.85 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapPrimaryControllerIp OBJECT-TYPE This object represents the IP address of the AP's primary controller. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.86 | IpAddress | accessible-for-notify | current |
| wlsxTrapBackupControllerIp OBJECT-TYPE This object represents the IP address of the AP's backup controller. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.87 | IpAddress | accessible-for-notify | current |
| wlsxTrapSpoofedFrameType OBJECT-TYPE This object is used in the traps to indicate the Spoofed Frame Type | 1.3.6.1.4.1.14823.2.3.1.11.1.1.88 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapAssociationType OBJECT-TYPE This object is used in the traps to indicate the type of association | 1.3.6.1.4.1.14823.2.3.1.11.1.1.89 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapDeviceIpAddress OBJECT-TYPE This object represents the IP address of a device seen by an AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.90 | IpAddress | accessible-for-notify | current |
| wlsxTrapDeviceMac OBJECT-TYPE This object represents the MAC address of a device seen by an AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.91 | MacAddress | accessible-for-notify | current |
| wlsxTrapVcIpAddress OBJECT-TYPE This object represents the Ip Address of a Voice client. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.92 | IpAddress | accessible-for-notify | current |
| wlsxTrapVcMacAddress OBJECT-TYPE This object represents the MAC address of a Voice client. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.93 | MacAddress | accessible-for-notify | current |
| wlsxTrapAPName OBJECT-TYPE This object is used in the traps to indicate the Name of the AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.94 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapApMode OBJECT-TYPE This Object represents the AP Mode. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.95 | Integer32 | accessible-for-notify | current |
| wlsxTrapAPPrevChannel OBJECT-TYPE This object is used in the traps to indicate the Previous Channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.96 | Integer32 | accessible-for-notify | current |
| wlsxTrapAPPrevChannelSec OBJECT-TYPE This object is used in the traps to indicate the Previous Secondary Channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.97 | ArubaHTExtChannel | accessible-for-notify | current |
| wlsxTrapAPPrevTxPower OBJECT-TYPE This object is used in the traps to indicate previous AP Transmit Power. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.98 | Integer32 | accessible-for-notify | current |
| wlsxTrapAPCurMode OBJECT-TYPE This Object represents the APs Current Mode. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.99 | ArubaAccessPointMode | accessible-for-notify | current |
| wlsxTrapAPPrevMode OBJECT-TYPE This Object represents the APs Previous Mode. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.100 | ArubaAccessPointMode | accessible-for-notify | current |
| wlsxTrapAPARMChangeReason OBJECT-TYPE This Object represents the APs Previous Mode. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.101 | ArubaARMChangeReason | accessible-for-notify | current |
| wlsxTrapAPChannelSec OBJECT-TYPE This object is used in the traps to indicate the Current Secondary Channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.102 | ArubaHTExtChannel | accessible-for-notify | current |
| wlsxTrapUserAttributeChangeType OBJECT-TYPE This object represents type of the configuration change. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.103 | ArubaConfigurationChangeType | accessible-for-notify | current |
| wlsxTrapApControllerIp OBJECT-TYPE IP address of the controller to which the AP is (or was most recently) registered. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.104 | IpAddress | accessible-for-notify | current |
| wlsxTrapApMasterStatus OBJECT-TYPE Status of the AP as seen by the master when the status changes. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.105 | ArubaAPMasterStatus | accessible-for-notify | current |
| wlsxTrapCaName OBJECT-TYPE This object is used in the traps to indicate the name of the trustpoint. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.106 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapCrlName OBJECT-TYPE This object is used in the traps to indicate the name of the crl. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.107 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapCount OBJECT-TYPE This object represents the number of occurrence of this trap. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.108 | Integer32 | accessible-for-notify | current |
| wlsxTrapPowerSupplyNumber OBJECT-TYPE This object represents the power supply number. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.109 | Integer32 | accessible-for-notify | current |
| wlsxTrapFanTrayNumber OBJECT-TYPE This object represents the Fan Tray number. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.110 | Integer32 | accessible-for-notify | current |
| wlsxTrapClientClassification OBJECT-TYPE This object is used in the traps to indicate the classification of the client. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.111 | ArubaStationType | accessible-for-notify | current |
| wlsxThresholdResourceType OBJECT-TYPE This object represents the Threshold alert's Resource Type . | 1.3.6.1.4.1.14823.2.3.1.11.1.1.112 | ArubaThresholdResourceType | accessible-for-notify | current |
| wlsxThresholdResourceName OBJECT-TYPE This object represents the Threshold alert's Resource Name . | 1.3.6.1.4.1.14823.2.3.1.11.1.1.113 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxThresholdValue OBJECT-TYPE This object represents the Threshold alert's set threshold value. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.114 | Integer32 | accessible-for-notify | current |
| wlsxResourceValue OBJECT-TYPE This object represents the Threshold alert's actual value. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.115 | Integer32 | accessible-for-notify | current |
| wlsxStackPrevSlot OBJECT-TYPE This object specifies the slot number of this stack element prior to topology change in stack. A value of -1 indicates that this slot was not in Active state of stack prior to topology change. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.116 | Integer32 | accessible-for-notify | current |
| wlsxStackCurrentSlot OBJECT-TYPE This object specifies the slot number of this stack element after the topology change in stack. A value of -1 indicates that this slot is not in Active state of stack after the topology change. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.117 | Integer32 | accessible-for-notify | current |
| wlsxStackPrevState OBJECT-TYPE This object specifies the state of this stack element prior to topology change in stack. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.118 | ArubaStackState | accessible-for-notify | current |
| wlsxStackCurrentState OBJECT-TYPE This object specifies the state of this stack element after topology change in stack. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.119 | ArubaStackState | accessible-for-notify | current |
| wlsxStackChangeEvent OBJECT-TYPE This object specifies the event which caused change in topology in stack. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.120 | ArubaStackChangeEvent | accessible-for-notify | current |
| wlsxStackProtoIfTopoJoined OBJECT-TYPE This object specifies whether an interface has joined the stacking topology or left the topology. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.121 | ArubaStackIfTopoJoined | accessible-for-notify | current |
| wlsxStackMemberMacAddress OBJECT-TYPE This object specifies mac-address of this stack element. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.122 | MacAddress | accessible-for-notify | current |
| wlsxStackMemberSlotNumber OBJECT-TYPE This object specifies the slot number of this element in stack. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.123 | Integer32 | accessible-for-notify | current |
| wlsxStackIfName OBJECT-TYPE This object specifies the interface name which is part of stacking link connected to other stacking element. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.124 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapLicenseServerDaysRemaining OBJECT-TYPE This object represents number of the days remaining prior to expiry of license limits sent by the server. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.125 | Integer32 | accessible-for-notify | current |
| wlsxTrapLicenseClientDaysRemaining OBJECT-TYPE This object represents number of the days remaining prior to expiry of licenses contributed by a license client. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.126 | Integer32 | accessible-for-notify | current |
| wlsxIfIndex OBJECT-TYPE This object specifies the ifIndex. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.127 | InterfaceIndex | accessible-for-notify | current |
| wlsxIfState OBJECT-TYPE This object specifies the state of an interface. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.128 | ArubaIfState | accessible-for-notify | current |
| wlsxIfStateChangeReason OBJECT-TYPE This object specifies the reason for interface state change. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.129 | ArubaIfStateChangeReason | accessible-for-notify | current |
| wlsxTrapAPPreviousUplinkType OBJECT-TYPE This object specifies the up link type for an AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.130 | ArubaAPUplinkType | accessible-for-notify | current |
| wlsxTrapAPPreviousUplinkActiveTime OBJECT-TYPE This object specifies the up link type for an AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.131 | TimeTicks | accessible-for-notify | current |
| wlsxTrapAPActiveUplinkType OBJECT-TYPE This object specifies the up link type for an AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.132 | ArubaAPUplinkType | accessible-for-notify | current |
| wlsxTrapAPUplinkChangeReason OBJECT-TYPE This object specifies the up link change reason. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.133 | ArubaAPUplinkChangeReason | accessible-for-notify | current |
| wlsxTrapExpiringCertName OBJECT-TYPE This object is used in the traps to indicate the name of the certificate that is expiring in less than 60 days. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.134 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapExpiredCertName OBJECT-TYPE This object is used in the traps to indicate the name of the certificate that has expired. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.135 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapHTMode OBJECT-TYPE This object represents HT Mode. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.136 | Integer32 | accessible-for-notify | current |
| wlsxTrapPhyType OBJECT-TYPE This object represents Physical Type. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.137 | Integer32 | accessible-for-notify | current |
| wlsxTrapAPManagedModeConfigFailure OBJECT-TYPE This object indicates the error for the failure of config apply on IAP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.138 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapAuthServerAddress OBJECT-TYPE This object is used in the traps to indicate the Authentication Server IP used for Authentication. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.139 | IpAddress | accessible-for-notify | current |
| wlsxTrapPortalServerName OBJECT-TYPE This object is used in the traps to indicate the Captive Portal Server used for Authentication. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.140 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapPortalServerAddress OBJECT-TYPE This object is used in the traps to indicate the Captive Portal Server IP or host name used for Authentication. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.141 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapPortalServerDownReason OBJECT-TYPE This object specifies the captive portal server down reason. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.142 | ArubaPortalServerDownReason | accessible-for-notify | current |
| wlsxTrapLicensePlatformMismatchKey OBJECT-TYPE This object represents license incompatibility with the given platform. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.143 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTargetAPName OBJECT-TYPE This object is used in the traps to indicate the target's AP name. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.144 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapTargetAPMac OBJECT-TYPE This object is used in the traps to indicate the target's MAC address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.145 | MacAddress | accessible-for-notify | current |
| wlsxTrapAPUSBStatus OBJECT-TYPE This object represents plug in or plug out status of an USB device. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.146 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapUSBVendorProductID OBJECT-TYPE This object represents vendor ID or product ID of an USB device. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.147 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapSwitchIpv6 OBJECT-TYPE This object represents the controller IPv6 address. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.148 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapStationBlackListReasonStr OBJECT-TYPE The Reason for which a station is black listed in details. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.149 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapPeerIpAddress OBJECT-TYPE This object is used in the traps to indicate the peer IP address of Cluster VLAN probe. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.150 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapConnectionStatus OBJECT-TYPE This object is used in the traps to indicate the Connection status of Cluster VLAN probe. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.151 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapFailedVlan OBJECT-TYPE This object is used in the traps to indicate the failed VLAN id of cluster VLAN probe. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.152 | Integer32 | accessible-for-notify | current |
| wlsxTrapMatchedIpv6 OBJECT-TYPE This object is used in the traps to indicate the IPv6 address | 1.3.6.1.4.1.14823.2.3.1.11.1.1.153 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapDeviceIpv6Address OBJECT-TYPE This object represents the IPv6 address of a device seen by an AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.154 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapAuthFailureReason OBJECT-TYPE This object represents the reason for the authentication failure. | 1.3.6.1.4.1.14823.2.3.1.11.1.1.155 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| wlsxTrapDefinitionsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.11.1.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| wlsxVlanLinkUp NOTIFICATION-TYPE This trap indicates that a VLAN interface is up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1000 | current |
| wlsxVlanLinkDown NOTIFICATION-TYPE This trap indicates that a VLAN interface is down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1001 | current |
| wlsxSignatureMatch NOTIFICATION-TYPE This trap indicates that a signature match was detected. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1002 | current |
| wlsxNodeRateAnomaly NOTIFICATION-TYPE This trap indicates that a node is exceeding the threshold set for the frame type. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1003 | current |
| wlsxNormalTemperature NOTIFICATION-TYPE This trap indicates that the Temperature has returned to an acceptable range. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1004 | current |
| wlsxProcessRestart NOTIFICATION-TYPE This trap indicates that the named process has been restarted. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1005 | current |
| wlsxFlashSpaceOK NOTIFICATION-TYPE This trap which indicates that the system flash space is back to a sufficient level. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1006 | current |
| wlsxMemoryUsageOK NOTIFICATION-TYPE This trap which indicates that the free memory usage is back to a sufficient level. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1007 | current |
| wlsxPowerSupplyOK NOTIFICATION-TYPE This trap indicates that the system power supply condition have returned to normal operation status. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1008 | current |
| wlsxFanOK NOTIFICATION-TYPE This trap indicates that the fan has returned to normal. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1009 | current |
| wlsxInRangeVoltage NOTIFICATION-TYPE This trap indicates that the controller Voltage is back within range. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1010 | current |
| wlsxCoverageHoleResolved NOTIFICATION-TYPE This trap indicates that a coverage hole at location wlsxTrapAPLocation has been resolved. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1011 | current |
| wlsxNSwitchIPChanged NOTIFICATION-TYPE This trap indicates that the controller IP address has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1012 | current |
| wlsxNSwitchRoleChange NOTIFICATION-TYPE This trap indicates that the role of the controller IP address has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1013 | current |
| wlsxNUserEntryCreated NOTIFICATION-TYPE This trap indicates that a new user was created. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1014 | current |
| wlsxNUserEntryDeleted NOTIFICATION-TYPE This trap indicates that a user was deleted. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1015 | current |
| wlsxNUserEntryAuthenticated NOTIFICATION-TYPE This trap indicates that a user is Authenticated. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1016 | current |
| wlsxNUserEntryDeAuthenticated NOTIFICATION-TYPE This trap indicates that a user is Deauthenticated. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1017 | current |
| wlsxNUserAuthenticationFailed NOTIFICATION-TYPE This trap indicates that a user authentication has failed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1018 | current |
| wlsxNAuthServerReqTimedOut NOTIFICATION-TYPE This trap indicates that the authentication server request timed out. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1019 | current |
| wlsxNAuthServerTimedOut NOTIFICATION-TYPE This trap indicates that the authentication server timed out. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1020 | current |
| wlsxNAuthServerIsUp NOTIFICATION-TYPE This trap indicates that an authentication server is up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1021 | current |
| wlsxNAuthMaxUserEntries NOTIFICATION-TYPE A trap which indicates that the user entries table is full and cannot add any more entries. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1022 | current |
| wlsxNAuthMaxAclEntries NOTIFICATION-TYPE A trap which indicates that the ACL Entries table is full and cannot add any more entries. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1023 | current |
| wlsxNAuthMaxBWContracts NOTIFICATION-TYPE A trap which indicates that the controller reached the maximum number of configurable Bandwidth contracts. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1024 | current |
| wlsxNPowerSupplyFailure NOTIFICATION-TYPE A trap which indicates that the power supply has failed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1025 | current |
| wlsxNFanFailure NOTIFICATION-TYPE A trap which indicates that the fan has failed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1026 | current |
| wlsxNOutOfRangeVoltage NOTIFICATION-TYPE A trap which indicates that the controller voltage is out of range. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1027 | current |
| wlsxNOutOfRangeTemperature NOTIFICATION-TYPE A trap which indicates that the controller internal temperature is out of range. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1028 | current |
| wlsxNLCInserted NOTIFICATION-TYPE A Trap which indicates that a line card is inserted. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1029 | current |
| wlsxNSCInserted NOTIFICATION-TYPE a Trap which indicates that a supervisor card is inserted. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1030 | current |
| wlsxNGBICInserted NOTIFICATION-TYPE A Trap which indicates that a GBIC is inserted in a Line Card. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1031 | current |
| wlsxNProcessDied NOTIFICATION-TYPE A Trap which indicates that a process has died. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1032 | current |
| wlsxNProcessExceedsMemoryLimits NOTIFICATION-TYPE A Trap which indicates that a process is consuming Large amounts of memory. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1033 | current |
| wlsxNLowOnFlashSpace NOTIFICATION-TYPE A Trap which indicates that the controller is running low on flash space. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1034 | current |
| wlsxNLowMemory NOTIFICATION-TYPE A Trap which indicates that the system free memory is low. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1035 | current |
| wlsxNFanTrayRemoved NOTIFICATION-TYPE A Trap which indicates that a fan tray is removed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1036 | current |
| wlsxNFanTrayInserted NOTIFICATION-TYPE A Trap which indicates that a fan tray is inserted. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1037 | current |
| wlsxNLCRemoved NOTIFICATION-TYPE A Trap which indicates that a Line card is removed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1038 | current |
| wlsxNPowerSupplyMissing NOTIFICATION-TYPE A Trap which indicates that the power supply is missing. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1039 | current |
| wlsxNAccessPointIsUp NOTIFICATION-TYPE A Trap which indicates that an access point up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1040 | current |
| wlsxNAccessPointIsDown NOTIFICATION-TYPE A Trap which indicates that an access point down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1041 | current |
| wlsxNCoverageHoleDetected NOTIFICATION-TYPE This trap indicates that an access point at Location wlsxTrapAPLocation has detected a Coverage Hole. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1042 | current |
| wlsxNChannelChanged NOTIFICATION-TYPE This trap indicates that an access point at Location wlsxTrapAPLocation has changed the channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1043 | current |
| wlsxNStationAddedToBlackList NOTIFICATION-TYPE This trap indicates that the station is black listed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1044 | current |
| wlsxNStationRemovedFromBlackList NOTIFICATION-TYPE This trap indicates that the station is removed from the black list. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1045 | current |
| wlsxNIpSpoofingDetected NOTIFICATION-TYPE A trap indicating that the controller detected IP Spoofing. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1046 | current |
| wlsxNDBCommunicationFailure NOTIFICATION-TYPE This trap indicates that communication with Database failed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1047 | current |
| wlsxNVrrpStateChange NOTIFICATION-TYPE This trap indicates that VRRP state has changed on the controller. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1048 | current |
| wlsxNRadioAttributesChanged NOTIFICATION-TYPE A Trap which indicates changes in the Radio attributes of an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1049 | current |
| wlsxNESIServerUp NOTIFICATION-TYPE A Trap which indicates that a ESI server is up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1050 | current |
| wlsxNESIServerDown NOTIFICATION-TYPE A Trap which indicates that a ESI server is down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1051 | current |
| wlsxNLicenseExpiry NOTIFICATION-TYPE A Trap which indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1052 | current |
| wlsxUnsecureAPDetected NOTIFICATION-TYPE This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1053 | current |
| wlsxUnsecureAPResolved NOTIFICATION-TYPE This trap indicates that a previously detected access point, classified as Rogue, is no longer present in the network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1054 | current |
| wlsxStaImpersonation NOTIFICATION-TYPE This trap indicates that an AM detected Station Impersonation. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1055 | current |
| wlsxReservedChannelViolation NOTIFICATION-TYPE This trap indicates that an AM detected an access point which is violating the Reserved Channel configuration. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1056 | current |
| wlsxValidSSIDViolation NOTIFICATION-TYPE This trap indicates that an AP has detected an access point is violating Valid SSID configuration by using an SSID that is reserved for use by a valid AP only. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1057 | current |
| wlsxChannelMisconfiguration NOTIFICATION-TYPE This trap indicates that an AP detected an access point that has a channel misconfiguration because it is using a channel that is not valid. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1058 | current |
| wlsxOUIMisconfiguration NOTIFICATION-TYPE This trap indicates that an AP detected an access point that has an OUI misconfiguration because it is using an OUI that is not valid. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1059 | current |
| wlsxSSIDMisconfiguration NOTIFICATION-TYPE This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using an SSID that is not valid. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1060 | current |
| wlsxShortPreableMisconfiguration NOTIFICATION-TYPE This trap indicates that an access point has bad Short preamble configuration. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1061 | current |
| wlsxWPAMisconfiguration NOTIFICATION-TYPE This trap indicates that an AP detected an access point that is misconfigured because it is not using WPA. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1062 | current |
| wlsxAdhocNetworkDetected NOTIFICATION-TYPE This trap indicates that an AM has detected an Ad hoc network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1063 | current |
| wlsxAdhocNetworkRemoved NOTIFICATION-TYPE This trap indicates that a previously detected Ad hoc Network is no longer present in the network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1064 | current |
| wlsxStaPolicyViolation NOTIFICATION-TYPE This trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1065 | current |
| wlsxRepeatWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1066 | current |
| wlsxWeakWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1067 | current |
| wlsxChannelInterferenceDetected NOTIFICATION-TYPE This trap indicates that an AP has detected channel interference. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1068 | current |
| wlsxChannelInterferenceCleared NOTIFICATION-TYPE This trap indicates that a previously detected channel interference is no longer present. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1069 | current |
| wlsxAPInterferenceDetected NOTIFICATION-TYPE This trap indicates that an AP has detected interference for an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1070 | current |
| wlsxAPInterferenceCleared NOTIFICATION-TYPE This trap indicates that the previously detected interference for an access point is no longer present. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1071 | current |
| wlsxStaInterferenceDetected NOTIFICATION-TYPE This trap indicates that an AP has detected interference for a station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1072 | current |
| wlsxStaInterferenceCleared NOTIFICATION-TYPE This trap indicates that the previously detected interference for a station is no longer present. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1073 | current |
| wlsxFrameRetryRateExceeded NOTIFICATION-TYPE This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1074 | current |
| wlsxFrameReceiveErrorRateExceeded NOTIFICATION-TYPE This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1075 | current |
| wlsxFrameFragmentationRateExceeded NOTIFICATION-TYPE This trap indicates that an AP detected that an access point exceeded the configured upper threshold for Frame Fragmentation Rate. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1076 | current |
| wlsxFrameBandWidthRateExceeded NOTIFICATION-TYPE This trap indicates that an AP detected that a station or access point has exceeded the configured upper threshold for Bandwidth rate. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1077 | current |
| wlsxFrameLowSpeedRateExceeded NOTIFICATION-TYPE This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1078 | current |
| wlsxFrameNonUnicastRateExceeded NOTIFICATION-TYPE This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Non Unicast traffic rate. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1079 | current |
| wlsxLoadbalancingEnabled NOTIFICATION-TYPE This trap indicates that an AM is reporting that an AP has enabled Load balancing. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1080 | current |
| wlsxLoadbalancingDisabled NOTIFICATION-TYPE This trap indicates that an AM is reporting that an AP has enabled Load balancing. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1081 | current |
| wlsxChannelFrameRetryRateExceeded NOTIFICATION-TYPE This trap indicates that an AP has detected that the configured upper threshold for Frame Retry Rate was exceeded on a channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1082 | current |
| wlsxChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE This trap indicates that an AP has detected that the configured upper threshold for Frame Fragmentation Rate was exceeded on a channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1083 | current |
| wlsxChannelFrameErrorRateExceeded NOTIFICATION-TYPE This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1084 | current |
| wlsxSignatureMatchAP NOTIFICATION-TYPE This trap indicates that an AP detected a signature match in a frame from an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1085 | current |
| wlsxSignatureMatchSta NOTIFICATION-TYPE This trap indicates that an AP detected a signature match in a frame from a Station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1086 | current |
| wlsxChannelRateAnomaly NOTIFICATION-TYPE This trap indicates that an AP detected frames on a channel which exceed the configured IDS rate threshold. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1087 | current |
| wlsxNodeRateAnomalyAP NOTIFICATION-TYPE This trap indicates that an AP detected frames transmitted or received by an access point, which exceed the configured IDS rate threshold. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1088 | current |
| wlsxNodeRateAnomalySta NOTIFICATION-TYPE This trap indicates that an AP detected frames transmitted or received by a node, which exceed the configured IDS rate threshold. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1089 | current |
| wlsxEAPRateAnomaly NOTIFICATION-TYPE This trap indicates that the rate of EAP Handshake packets received by an AP has exceeded the configured IDS EAP Handshake rate threshold. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1090 | current |
| wlsxSignalAnomaly NOTIFICATION-TYPE This trap indicates that an AM detected a Signal Anomaly. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1091 | current |
| wlsxSequenceNumberAnomalyAP NOTIFICATION-TYPE This trap indicates that an AM received packets from an AP which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1092 | current |
| wlsxSequenceNumberAnomalySta NOTIFICATION-TYPE This trap indicates that an AM received packets from a Node which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1093 | current |
| wlsxDisconnectStationAttack NOTIFICATION-TYPE This trap indicates that an AM detected a station Disconnect attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1094 | current |
| wlsxApFloodAttack NOTIFICATION-TYPE This trap indicates that the number of potential fake APs detected by an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1095 | current |
| wlsxAdhocNetwork NOTIFICATION-TYPE This trap indicates that an AM detected an Ad hoc Network. An Station is connected to an ad hoc AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1096 | current |
| wlsxWirelessBridge NOTIFICATION-TYPE This trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1097 | current |
| wlsxInvalidMacOUIAP NOTIFICATION-TYPE This trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame. An invalid MAC OUI suggests that the frame may be spoofed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1098 | current |
| wlsxInvalidMacOUISta NOTIFICATION-TYPE This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1099 | current |
| wlsxWEPMisconfiguration NOTIFICATION-TYPE This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1100 | current |
| wlsxStaRepeatWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1101 | current |
| wlsxStaWeakWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP detected that a valid station is using a Weak WEP initialization vector. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1102 | current |
| wlsxStaAssociatedToUnsecureAP NOTIFICATION-TYPE This trap indicates that an AM detected a client associated with a Rogue access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1103 | current |
| wlsxStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE This trap indicates that a previously detected rogue access point association is no longer present. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1104 | current |
| wlsxAdhocNetworkBridgeDetected NOTIFICATION-TYPE This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1105 | current |
| wlsxInterferingApDetected NOTIFICATION-TYPE This trap indicates that an AP detected an access point classified as Interfering. The access point is declared Interfering because it is neither authorized or classified as Rogue. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1106 | current |
| wlsxPortUp NOTIFICATION-TYPE This trap indicates that a Physical port is up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1107 | deprecated |
| wlsxPortDown NOTIFICATION-TYPE This trap indicates that a Physical port is Down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1108 | deprecated |
| wlsxBSSIDIsUp NOTIFICATION-TYPE A Trap which indicates that an access point BSSID is up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1109 | current |
| wlsxBSSIDIsDown NOTIFICATION-TYPE A Trap which indicates that an access point BSSID is down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1110 | current |
| wlsxColdStart NOTIFICATION-TYPE An enterprise version of cold start trap, which contains the controller time stamp. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1111 | current |
| wlsxWarmStart NOTIFICATION-TYPE An enterprise version of warm start trap, which contains the controller time stamp. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1112 | current |
| wlsxAPImpersonation NOTIFICATION-TYPE This trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold. The expected number is calculated based on the Beacon Interval Field in the Beacon frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1113 | current |
| wlsxInformQueueOverFlow NOTIFICATION-TYPE This trap indicates that an Inform queue overflow condition occurred. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1114 | current |
| wlsxNAuthServerIsDown NOTIFICATION-TYPE This trap indicates that an authentication server is down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1115 | current |
| wlsxCTSTransferError NOTIFICATION-TYPE This trap indicates the status of the configuration transfer from the management station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1116 | current |
| wlsxCTSTransferSucceeded NOTIFICATION-TYPE This trap indicates the status of the configuration transfer from the management station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1117 | current |
| wlsxConfigurationUpdateError NOTIFICATION-TYPE This trap indicates the configuration update status. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1118 | current |
| wlsxConfigurationUpdateSucceeded NOTIFICATION-TYPE This trap indicates the configuration update status. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1119 | current |
| wlsxGlobalConfigurationChangeNotification NOTIFICATION-TYPE This trap indicates that global configuration was modified on the controller. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1120 | current |
| wlsxUserEntryChanged NOTIFICATION-TYPE This trap indicates that the user configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1121 | current |
| wlsxAPBssidEntryChanged NOTIFICATION-TYPE This trap indicates that the BSSID configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1122 | current |
| wlsxAPRadioEntryChanged NOTIFICATION-TYPE This trap indicates that the Radio configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1123 | current |
| wlsxAPEntryChanged NOTIFICATION-TYPE This trap indicates that the AP configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1124 | current |
| wlsxSwitchListEntryChanged NOTIFICATION-TYPE This trap indicates that the controller list has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1125 | current |
| wlsxPortEntryChanged NOTIFICATION-TYPE This trap indicates that the port configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1126 | current |
| wlsxVlanEntryChanged NOTIFICATION-TYPE This trap indicates that the VLAN configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1127 | current |
| wlsxVlanInterfaceEntryChanged NOTIFICATION-TYPE This trap indicates that the VLAN Interface configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1128 | current |
| wlsxWindowsBridgeDetected NOTIFICATION-TYPE This trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1129 | current |
| wlsxLicenseEntryChanged NOTIFICATION-TYPE This trap indicates that the license table has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1130 | current |
| wlsxEsiServerChanged NOTIFICATION-TYPE This trap indicates that the ESI server table has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1131 | current |
| wlsxMonAPEntryChanged NOTIFICATION-TYPE This trap indicates that a monitored AP entry changed | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1132 | current |
| wlsxMonStationEntryChanged NOTIFICATION-TYPE This trap indicates that a monitored station entry changed | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1133 | current |
| wlsxSignAPNetstumbler NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Netstumbler from an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1134 | current |
| wlsxSignStaNetstumbler NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Netstumbler from a Station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1135 | current |
| wlsxSignAPAsleap NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for ASLEAP from an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1136 | current |
| wlsxSignStaAsleap NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for ASLEAP from a Station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1137 | current |
| wlsxSignAPAirjack NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for AirJack from an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1138 | current |
| wlsxSignStaAirjack NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for AirJack from a Station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1139 | current |
| wlsxSignAPNullProbeResp NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Null-Probe-Response from an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1140 | current |
| wlsxSignStaNullProbeResp NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Null-Probe-Response from a Station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1141 | current |
| wlsxSignAPDeauthBcast NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1142 | current |
| wlsxSignStaDeauthBcast NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1143 | current |
| wlsxWindowsBridgeDetectedAP NOTIFICATION-TYPE This trap indicates that an AP is detecting an access point that is bridging from a wireless network to a wired network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1144 | current |
| wlsxWindowsBridgeDetectedSta NOTIFICATION-TYPE This trap indicates that an AP is detecting a station that is bridging from a wireless network to a wired network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1145 | current |
| wlsxAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1146 | current |
| wlsxAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1147 | current |
| wlsxDisconnectStationAttackAP NOTIFICATION-TYPE This trap indicates that an AM detected a station disconnect attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1148 | current |
| wlsxDisconnectStationAttackSta NOTIFICATION-TYPE This trap indicates that an AM detected a station Disconnect attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1149 | current |
| wlsxSuspectUnsecureAPDetected NOTIFICATION-TYPE This trap indicates that an access point, classified as Suspected Rogue, has been detected by a Controller. The AP is suspected to be rogue, with the supplied confidence level, because it was matched to the wired MAC address. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1150 | current |
| wlsxSuspectUnsecureAPResolved NOTIFICATION-TYPE This trap indicates that a previously detected access point, classified Suspected Rogue, is either no longer present in the network or has changed its state. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1151 | current |
| wlsxConfigurationLicenseMismatch NOTIFICATION-TYPE This trap indicates the configuration update status in the case where some configuration could not be applied due to missing licenses. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1152 | current |
| wlsxVoiceCdrBufferThresholdReached NOTIFICATION-TYPE This trap indicates that the CDR buffer threshold has been reached | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1153 | current |
| wlsxTunnelUp NOTIFICATION-TYPE This trap indicates that a tunnel interface is up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1154 | current |
| wlsxTunnelDown NOTIFICATION-TYPE This trap indicates that a tunnel interface is down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1155 | current |
| wlsxMeshNodeEntryChanged NOTIFICATION-TYPE This trap indicates that the mesh node configuration has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1156 | current |
| wlsxHtGreenfieldSupported NOTIFICATION-TYPE This trap indicates that an AP detected an access point that supports HT Greenfield mode. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1157 | current |
| wlsxHT40MHzIntoleranceAP NOTIFICATION-TYPE This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1158 | current |
| wlsxHT40MHzIntoleranceSta NOTIFICATION-TYPE This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1159 | current |
| wlsxNAuthServerAllInService NOTIFICATION-TYPE This trap indicates that all authentication servers is a server group are brought back in service. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1160 | current |
| wlsxNAdhocNetwork NOTIFICATION-TYPE This trap indicates that an AP detected an ad hoc network where a station is connected to an ad hoc access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1161 | current |
| wlsxNAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE This trap indicates that an AP detected an ad hoc network that is bridging to a wired network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1162 | current |
| wlsxNAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE This trap indicates that an AP detected an ad hoc network that is bridging to a wired network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1163 | current |
| wlsxNAuthMaxXsecUserEntries NOTIFICATION-TYPE A trap which indicates that the xSec user limit is reached. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1164 | current |
| wlsxNVpnMaxSessions NOTIFICATION-TYPE A trap which indicates that the VPN session limit is reached. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1165 | current |
| wlsxNRapExpiredPSK NOTIFICATION-TYPE A trap which indicates that the RAP is using the Expired PSK. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1166 | current |
| wlsxNRapWarnExpiredPSK NOTIFICATION-TYPE A trap which indicates that the Cached IKE PSK for RAPs will expire soon. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1167 | current |
| wlsxNConnectionResetWithLocal NOTIFICATION-TYPE A trap which indicates that tcp connection between master controller and local controller has been lost. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1168 | current |
| wlsxNApOnBackupController NOTIFICATION-TYPE A trap which indicates that the AP has registered with the backup controller. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1169 | current |
| wlsxClientFloodAttack NOTIFICATION-TYPE This trap indicates that the number of potential fake clients detected by an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1170 | current |
| wlsxValidClientNotUsingEncryption NOTIFICATION-TYPE This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1171 | current |
| wlsxAdhocUsingValidSSID NOTIFICATION-TYPE This trap indicates that an AP detected an ad hoc network using a valid/protected SSID. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1172 | current |
| wlsxAPSpoofingDetected NOTIFICATION-TYPE This trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1173 | current |
| wlsxClientAssociatingOnWrongChannel NOTIFICATION-TYPE This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel. This can be a sign that the BSSID is being spoofed in order to fool the client into thinking the AP is operating on another channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1174 | current |
| wlsxNDisconnectStationAttack NOTIFICATION-TYPE This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets received by that client exceeds the configured threshold. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1175 | current |
| wlsxNStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE This trap indicates that an AP that had previously detected a client association to a Rogue access point is no longer detecting that association. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1176 | current |
| wlsxOmertaAttack NOTIFICATION-TYPE This trap indicates that an AP detected an Omerta attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1177 | current |
| wlsxTKIPReplayAttack NOTIFICATION-TYPE This trap indicates that an AP detected a possible TKIP replay attack. If successful this could be the precursor to more advanced attacks. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1178 | current |
| wlsxChopChopAttack NOTIFICATION-TYPE This trap indicates that an AP detected a ChopChop attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1179 | current |
| wlsxFataJackAttack NOTIFICATION-TYPE This trap indicates that an AP detected a FATA-Jack attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1180 | current |
| wlsxInvalidAddressCombination NOTIFICATION-TYPE This trap indicates that an AP detected an invalid source and destination combination. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1181 | current |
| wlsxValidClientMisassociation NOTIFICATION-TYPE This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1182 | current |
| wlsxMalformedHTIEDetected NOTIFICATION-TYPE This trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1183 | current |
| wlsxMalformedAssocReqDetected NOTIFICATION-TYPE This trap indicates that an AP detected a malformed association request with a NULL SSID. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1184 | current |
| wlsxOverflowIEDetected NOTIFICATION-TYPE This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1185 | current |
| wlsxOverflowEAPOLKeyDetected NOTIFICATION-TYPE This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1186 | current |
| wlsxMalformedFrameLargeDurationDetected NOTIFICATION-TYPE This trap indicates that an AP detected an unusually large duration in a wireless frame. This may be an attempt to block other devices from transmitting. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1187 | current |
| wlsxMalformedFrameWrongChannelDetected NOTIFICATION-TYPE This trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1188 | current |
| wlsxMalformedAuthFrame NOTIFICATION-TYPE This trap indicates that an AP detected an authentication frame with either a bad algorithm (similar to Fata-Jack) or a bad transaction. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1189 | current |
| wlsxCTSRateAnomaly NOTIFICATION-TYPE This trap indicates that the rate of CTS packets received by an AP exceeds the configured IDS threshold. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1190 | current |
| wlsxRTSRateAnomaly NOTIFICATION-TYPE This trap indicates that the rate of RTS packets received by an AP exceeds the configured IDS threshold. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1191 | current |
| wlsxNRogueAPDetected NOTIFICATION-TYPE This trap indicates that an unauthorized access point is connected to the wired network. The access point is classified as Rogue by the system. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1192 | current |
| wlsxNRogueAPResolved NOTIFICATION-TYPE This trap indicates that a previously detected access point, classified as Rogue, is either no longer present in the network or it changed its state. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1193 | current |
| wlsxNeighborAPDetected NOTIFICATION-TYPE This trap indicates that an access point has been classified as a Neighbor by the system. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1194 | current |
| wlsxNInterferingAPDetected NOTIFICATION-TYPE This trap indicates that an access point has been classified as Interfering by the system. The access point is declared Interfering because it is not authorized, nor has it been classified as a Rogue. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1195 | current |
| wlsxNSuspectRogueAPDetected NOTIFICATION-TYPE This trap indicates that an access point, classified as Suspected Rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1196 | current |
| wlsxNSuspectRogueAPResolved NOTIFICATION-TYPE This trap indicates that a previously detected access point, classified as Suspected Rogue, is either no longer present in the network or has changed its state. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1197 | current |
| wlsxBlockAckAttackDetected NOTIFICATION-TYPE This trap indicates that an attempt has been made to deny service to the source address by spoofing a block ACK add request that sets a sequence number window outside the currently used window. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1198 | current |
| wlsxHotspotterAttackDetected NOTIFICATION-TYPE This trap indicates that a new AP has appeared immediately following a client probe request. This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake hotspot or other wireless network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1199 | current |
| wlsxNSignatureMatch NOTIFICATION-TYPE This trap indicates that an AP detected a signature match in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1200 | current |
| wlsxNSignatureMatchNetstumbler NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Netstumbler in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1201 | current |
| wlsxNSignatureMatchAsleap NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for ASLEAP in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1202 | current |
| wlsxNSignatureMatchAirjack NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Airjack in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1203 | current |
| wlsxNSignatureMatchNullProbeResp NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Null-Probe-Response in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1204 | current |
| wlsxNSignatureMatchDeauthBcast NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1205 | current |
| wlsxNSignatureMatchDisassocBcast NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1206 | current |
| wlsxNSignatureMatchWellenreiter NOTIFICATION-TYPE This trap indicates that an AP detected a signature match for Wellenreiter in a frame. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1207 | current |
| wlsxAPDeauthContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain an access point by disconnecting its client. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1208 | current |
| wlsxClientDeauthContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain a client by disconnecting it from the AP that it is associated with. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1209 | current |
| wlsxAPWiredContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1210 | current |
| wlsxClientWiredContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1211 | current |
| wlsxAPTaggedWiredContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1212 | current |
| wlsxClientTaggedWiredContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1213 | current |
| wlsxTarpitContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain an access point by moving a client that is attempting to associate to it to a tarpit. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1214 | current |
| wlsxVoiceClientLocationUpdate NOTIFICATION-TYPE This trap indicates that the location of voice client has been changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1215 | current |
| wlsxAPChannelChange NOTIFICATION-TYPE This trap indicates that an AP changed its channel. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1216 | current |
| wlsxAPPowerChange NOTIFICATION-TYPE This trap indicates that an AP changed its transmit power level. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1217 | current |
| wlsxAPModeChange NOTIFICATION-TYPE This trap indicates that an AP changed its mode from AP to APMonitor or vice versa. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1218 | current |
| wlsxUserEntryAttributesChanged NOTIFICATION-TYPE This trap indicates that the user entry attributes have changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1219 | current |
| wlsxPowerSaveDosAttack NOTIFICATION-TYPE This trap indicates that an AP detected a Power Save DoS attack. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1220 | current |
| wlsxNAPMasterStatusChange NOTIFICATION-TYPE This trap indicates that the status of the AP as seen by the master controller has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1221 | current |
| wlsxNAdhocUsingValidSSID NOTIFICATION-TYPE This trap indicates that an AP detected an ad hoc network node using a valid/protected SSID. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1222 | current |
| wlsxCRLExpired NOTIFICATION-TYPE This trap indicates that the CRL associated with the particular Trustpoint is expired. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1223 | current |
| wlsxMgmtUserAuthenticationFailed NOTIFICATION-TYPE This trap indicates that a management user authentication has failed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1224 | current |
| wlsxNConnectionBackfromLocal NOTIFICATION-TYPE A trap which indicates that tcp connection between master controller and local controller is back. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1225 | current |
| wlsxAPNumUpgradeFailure NOTIFICATION-TYPE A trap which indicates the number of upgrade failure of an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1226 | current |
| wlsxAPNumWarmStarts NOTIFICATION-TYPE A trap which indicates the number of warm starts of an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1227 | current |
| wlsxAPNumColdStarts NOTIFICATION-TYPE A trap which indicates the number of cold starts of an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1228 | current |
| wlsxAPNumDown NOTIFICATION-TYPE A trap which indicates the number of down alarms of an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1229 | current |
| wlsxAPNumRadioDown NOTIFICATION-TYPE A trap which indicates the number of radio down alarms of an access point. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1230 | current |
| wlsxNumClockSyncErrors NOTIFICATION-TYPE A trap which indicates the total number of clock sync errors between the switch and access points. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1231 | current |
| wlsxNumColdStart NOTIFICATION-TYPE A trap which indicates the number of cold-starts of the switch. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1232 | current |
| wlsxNumWarmStart NOTIFICATION-TYPE A trap which indicates the number of warm-starts of the switch. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1233 | current |
| wlsxWirelessHostedNetworkDetected NOTIFICATION-TYPE This trap indicates that an AP detected a wireless client that is hosting a softAP. The softAP could be used to share the hosting client's wired or wireless network connection with other wireless users. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1234 | current |
| wlsxClientAssociatedToHostedNetwork NOTIFICATION-TYPE This trap indicates that an AP detected that a wireless client associated to an access point that is hosted by another wireless client. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1235 | current |
| wlsxThresholdExceeded NOTIFICATION-TYPE A trap indicates a particular resource under monitoring has gone above the threshold specified. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1236 | current |
| wlsxThresholdCleared NOTIFICATION-TYPE A trap indicates a particular resource under monitoring has come below the threshold specified. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1237 | current |
| wlsxWirelessHostedNetworkContainment NOTIFICATION-TYPE This trap indicates that containment is being enforced on a client associated to a hosted network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1238 | current |
| wlsxHostOfWirelessNetworkContainment NOTIFICATION-TYPE This trap indicates that containment is being enforced on a client that is hosting a wireless hosted network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1239 | current |
| wlsxEnhancedAdhocContainment NOTIFICATION-TYPE This trap indicates that an AP has attempted to contain an adhoc node by disconnecting it from other members of the adhoc network. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1240 | current |
| wlsxPowerSupplyOKTrap NOTIFICATION-TYPE This trap indicates that the system power supply condition have returned to normal operation status. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1241 | current |
| wlsxPowerSupplyFailureTrap NOTIFICATION-TYPE A trap which indicates that the power supply has failed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1242 | current |
| wlsxFanTrayRemovedTrap NOTIFICATION-TYPE A Trap which indicates that a fan tray is removed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1243 | current |
| wlsxFanTrayInsertedTrap NOTIFICATION-TYPE A Trap which indicates that a fan tray is inserted. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1244 | current |
| wlsxPowerSupplyMissingTrap NOTIFICATION-TYPE A Trap which indicates that the power supply is missing. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1245 | current |
| wlsxStackTopologyChangeTrap NOTIFICATION-TYPE When change happens in any topology of the stack element in the stack, then a notification is sent to the Management Entity. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1246 | current |
| wlsxStackIfStateChangeTrap NOTIFICATION-TYPE When any stacking interface in any stack element joins or leaves stacking topology, then a notification is sent to the Management Entity with slot and interface information. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1247 | current |
| wlsxLicenseServerExpiry NOTIFICATION-TYPE A Trap which indicates that licenses sent from the license server will expire in wlsxTrapLicenseServerDaysRemaining days. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1248 | current |
| wlsxLicenseClientExpiry NOTIFICATION-TYPE A Trap which indicates that licenses contributed by a license client will expire in wlsxTrapLicenseClientDaysRemaining days. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1249 | current |
| wlsxIfStateChangeTrap NOTIFICATION-TYPE When the link state of an interface changes due to reason specified by wlsxIfStateChangeReason object, a notification is sent to the Management Entity with reason for this state change and interface information. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1250 | current |
| wlsxWMSOffloadRecommended NOTIFICATION-TYPE This trap indicates that current state in the WMS module shows that WMS is reaching capacity, and so it is recommended to enable WMS-Offload. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1251 | current |
| wlsxAPActiveUplinkChanged NOTIFICATION-TYPE When the active uplink of an AP changes, a notification is sent to the Management Entity with the new uplink type | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1252 | current |
| wlsxCertExpiringSoon NOTIFICATION-TYPE This trap indicates that a particular Certificate is going to expire in less than 60 days. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1253 | current |
| wlsxCertExpired NOTIFICATION-TYPE This trap indicates that a particular Certificate has expired and is no longer valid. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1254 | current |
| wlsxAPManagedModeConfigFailureTrap NOTIFICATION-TYPE This trap indicates that config apply has failed on the IAP. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1255 | current |
| wlsxNAuthServerAcctTimedOut NOTIFICATION-TYPE This trap indicates that the authentication server accounting timed out. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1256 | current |
| wlsxAPUp NOTIFICATION-TYPE A Trap which indicates that AP is Up with AP name and IP address. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1257 | current |
| wlsxAPDown NOTIFICATION-TYPE A Trap which indicates that AP is Down with AP name and IP address. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1258 | current |
| wlsxPortalServerDown NOTIFICATION-TYPE This trap indicates that the captive portal server is down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1259 | current |
| wlsxPortalServerUp NOTIFICATION-TYPE This trap indicates that the captive portal server is up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1260 | current |
| wlsxNAdhocUsingValidSSIDContainment NOTIFICATION-TYPE This trap indicates that containment is being enforced on an ad hoc wireless network node using a valid/protected SSID. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1261 | current |
| wlsxLicensePlatformMismatch NOTIFICATION-TYPE A Trap which indicates that license to be installed is not compatible with the platform. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1262 | current |
| wlsxIAPVoiceClientLocationUpdate NOTIFICATION-TYPE The trap represents a IAP voice client location update. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1263 | current |
| wlsxNAceUsageThreshold NOTIFICATION-TYPE A trap which indicates that the ACE Entries table has reached eighty percent of the maximum limit. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1264 | current |
| wlsxNWebCCLicenseEnforcement NOTIFICATION-TYPE A Trap which indicates that web-cc license enforcement has been triggered. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1265 | current |
| wlsxNFanAbsent NOTIFICATION-TYPE A trap which indicates that the fan is absent. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1266 | current |
| wlsxWPAFTAttack NOTIFICATION-TYPE This trap indicates there is a possible attack of the Fast BSS Transition causing a WPA key re-installation. This can be indicative of a security breach where an attacker can hijack a client's association and/or decrypt an otherwise secure connection. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1267 | current |
| wlsxMitMDetected NOTIFICATION-TYPE This trap indicates that an AP detected a possible channel-based Man in the Middle attack by someone using spoofed beacons with an invalid Channel Switch Announcement. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1268 | current |
| wlsxAPPortUp NOTIFICATION-TYPE This trap indicates that AP's secure jack port is Up. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1269 | current |
| wlsxAPPortDown NOTIFICATION-TYPE This trap indicates that AP's secure jack port is Down. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1270 | current |
| wlsxAPLoopDetected NOTIFICATION-TYPE This trap indicates that loop is detected on AP's secure jack port. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1271 | current |
| wlsxAPBROADCASTSTORM NOTIFICATION-TYPE This trap indicates that broadcast storm is detected on AP's secure jack port. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1272 | current |
| wlsxAPIPConflict NOTIFICATION-TYPE This trap indicates that an IP conflict is detected on AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1273 | current |
| wlsxCLEARPASSSERVERINVALID NOTIFICATION-TYPE This trap indicates that CLEARPASS server is not valid when using the CA to verity the server for download-role. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1274 | current |
| wlsxNLowOnFlash1Space NOTIFICATION-TYPE A Trap which indicates that the controller is running low on flash1 space. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1275 | current |
| wlsxFlash1SpaceOK NOTIFICATION-TYPE This trap which indicates that the system flash1 space is back to a sufficient level. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1276 | current |
| wlsxTHERMALSHUTDOWN NOTIFICATION-TYPE This trap indicates that an AP is overheat and in shutdown mode. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1277 | current |
| wlsxPhonyBSSIDDetected NOTIFICATION-TYPE This trap indicates that an AP detected a non-configured BSSID that should belong to one of our known valid APs. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1278 | current |
| wlsxAPUSBPLUGALARM NOTIFICATION-TYPE This trap indicates that an USB device is plugged in or out to an AP. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1279 | current |
| wlsxNSwitchIPv6Changed NOTIFICATION-TYPE This trap indicates that the controller IPv6 address has changed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1280 | current |
| wlsxNDot1xThresholdLimitHit NOTIFICATION-TYPE A Trap which indicates that the controller is running on high optimum limit. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1281 | current |
| wlsxNDot1xTotalLimitHit NOTIFICATION-TYPE A Trap which indicates that the controller is running on full optimum limit. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1282 | current |
| wlsxClusterVlanProbeStatus NOTIFICATION-TYPE This trap indicates the cluster VLAN probe status. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1283 | current |
| wlsxClientRejectedByMaxClientCount NOTIFICATION-TYPE This trap indicates the client is rejected by the max client count. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1284 | current |
| wlsxClientPskAuthenticationFailed NOTIFICATION-TYPE This trap indicates the client PSK Authentication Failed. | 1.3.6.1.4.1.14823.2.3.1.11.1.2.1285 | current |