APRISAXE-TC-4RF

Registered at: 1.3.6.1.4.1.14817.2.6
Last updated: 2007-04-30 00:00
Organization: www.4rf.com
Revisions: 2007-04-30 00:00, 2004-12-03 01:52
Namespace: 4rf
Source file: APRISAXE-TC-4RF
Digest: sha256:2cc2453d08f47685c41f64933ebea7a8b32cccde453c6d0f9bbe56d114a8bbeb

Description

Textual Conventions for the AprisaXE project

Contact

postal: 4RF Communications Ltd 26 Glover Street Ngauranga PO Box 13-506 Wellington 6032 New Zealand phone: +64 4 499 6000 email: support@4rf.com

Imports

From	Symbols
MIB-4RF	`fourRFModules`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP`
SNMPv2-SMI	`Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`

Imported by

2 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

APRISAXE-TC-4RF
MIB-4RF
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

Name	OID	Syntax	Access	Status
AprisaXE2WireSignalState TEXTUAL-CONVENTION This indicates the state of the CAS signalling bits as normal, inverted and disabled.				current
AprisaXE4WInputLevel TEXTUAL-CONVENTION The input (A->D) level in half dB steps for the 4wire mux cards.				current
AprisaXE4WOutputLevel TEXTUAL-CONVENTION The output (D->A) level in half dB steps for the 4wire mux cards.				current
AprisaXE4WRxGain TEXTUAL-CONVENTION The gain in half dB steps for 4wire mux cards.				obsolete
AprisaXE4WTxGain TEXTUAL-CONVENTION The gain in half dB steps for 4wire mux cards.				obsolete
AprisaXEAdcVoltage TEXTUAL-CONVENTION A voltage read from an ADC, in millivolts.				current
AprisaXEAdpcmCompression TEXTUAL-CONVENTION This defines the Compression available on ADPCM.				current
AprisaXEAlarmMapping TEXTUAL-CONVENTION This is used to map alarm to external outputs.				current
AprisaXEAlarmOutput TEXTUAL-CONVENTION This is used to map alarm to external outputs.				current
AprisaXEAlarmPolarity TEXTUAL-CONVENTION This is used to indicate the polarity indicating an alarm present on the external outputs.				current
AprisaXEAlarmSource TEXTUAL-CONVENTION This is used to identify the source of an alarm.				current
AprisaXEAlarmType TEXTUAL-CONVENTION The type of an alarm.				current
AprisaXECCActivationStatus TEXTUAL-CONVENTION Indicates the current state of cross connect activation for the port.				current
AprisaXECardType TEXTUAL-CONVENTION This is used to identify the type of MUX card in a slot. The values for the enumerations match the hardware type values returned from the MUX card FPGAs and EEPROMs.				current
AprisaXEChannelControlType TEXTUAL-CONVENTION This is used to set the control the channels, enabling and disabling E1/T1 ports.				current
AprisaXEConnectionID TEXTUAL-CONVENTION Represents a unique cross-connection identifier.				current
AprisaXEDataStatus TEXTUAL-CONVENTION This indicates the state of receiver, transmitter or MUX card MIB orcharacterisation data.				current
AprisaXEDbValue TEXTUAL-CONVENTION A value displayed in dB's.				current
AprisaXEDefaultAction TEXTUAL-CONVENTION Indicates whether, or not, MIB values should be defaulted.				current
AprisaXEEthernetFrameRate TEXTUAL-CONVENTION The frame rate limits allowed by the Marvell switch.				current
AprisaXEEthernetGroup TEXTUAL-CONVENTION Used for Ethernet groupings.				current
AprisaXEEthernetGrouping TEXTUAL-CONVENTION Indicates whether Ethernet Grouping is enabled or disabled.				current
AprisaXEEthernetPortNumber TEXTUAL-CONVENTION Ethernet port numbers.				current
AprisaXEEthernetPortPriority TEXTUAL-CONVENTION Indicates the bandwidth allocated to a port.				current
AprisaXEEthernetPrioQueueMapping TEXTUAL-CONVENTION Indicates the QOS priority mapping scheme.				current
AprisaXEEthernetPrioQueueScheduling TEXTUAL-CONVENTION Indicates the QOS priority scheduling scheme.				current
AprisaXEFXOCountry TEXTUAL-CONVENTION The country code for FXO mux cards this will need to be completed later.				current
AprisaXEFXOInputLevel TEXTUAL-CONVENTION The output (A->D) level in half dB steps for the DFXO mux cards.				current
AprisaXEFXOOutputLevel TEXTUAL-CONVENTION The output (D->A) level in half dB steps for the DFXO mux cards.				current
AprisaXEFXSInputLevel TEXTUAL-CONVENTION The output (A->D) level in half dB steps for the DFXS mux cards.				current
AprisaXEFXSOutputLevel TEXTUAL-CONVENTION The output (D->A) level in half dB steps for the DFXS mux cards.				current
AprisaXEFXSPMLevel TEXTUAL-CONVENTION Type of SPM level.				current
AprisaXEFXSPathMute TEXTUAL-CONVENTION The status of the Path Mute function for the DFXS.				current
AprisaXEHardwareVersion TEXTUAL-CONVENTION Represents a single byte hardware version number.				current
AprisaXEHssSerialMode TEXTUAL-CONVENTION Mode describing the type of serial interface, e.g. V.35.				current
AprisaXEIQData TEXTUAL-CONVENTION A sequence of IQ data pairs, each individual value is 16 bit thus a single IQ pair is 32 bits.				current
AprisaXEInterfaceCnxnType TEXTUAL-CONVENTION This describes the interface connection type. The values are arbitrary and are primarily used to identify instances of aggregate connections.				current
AprisaXEPSCActiveRadio TEXTUAL-CONVENTION This indicates the active radio for the PSC card.				current
AprisaXEPSCActiveTx TEXTUAL-CONVENTION This indicates the active transmitter card.				current
AprisaXEPcmLaw TEXTUAL-CONVENTION Type of PCM encoding available.				current
AprisaXEPcmMode TEXTUAL-CONVENTION The current PCM mode.				current
AprisaXEPortNumber TEXTUAL-CONVENTION This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.				current
AprisaXEQuadJetConnectionType TEXTUAL-CONVENTION Indicates whether a connection is for data or CAS signalling.				current
AprisaXEQuadJetLineEncoding TEXTUAL-CONVENTION This is used to set the line encoding for the Quad JET card the default is HDB3 for E1 and B8ZS for T1.				current
AprisaXEQuadJetLoopbacks TEXTUAL-CONVENTION This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.				current
AprisaXEQuadJetMultiframeEnable TEXTUAL-CONVENTION This is used to enable/disable support for transport of T1 SF and ESF multiframe sync for a port.				current
AprisaXEQuadJetTrafficType TEXTUAL-CONVENTION This is used to set the traffic rate for the Quad JET card.				current
AprisaXEQuadJetWaveFormShapers TEXTUAL-CONVENTION This is used to set the T1 Tx Waveform Shaper for a port; The default value is 0~133 ft.				current
AprisaXESerialEquipmentMode TEXTUAL-CONVENTION Mode describing the behaviour of the serial interface.				current
AprisaXESignalState TEXTUAL-CONVENTION This indicates the state of CAS signalling.				current
AprisaXESlotNumber TEXTUAL-CONVENTION Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX Card G 3 MUX Card F 4 MUX Card E 5 MUX Card D 6 MUX Card C 7 MUX Card B 8 MUX Card A 9 Transmitter Transmitter 10 Receiver Receiver Slots may or may not be populated.				current
AprisaXESysSoftwareStatus TEXTUAL-CONVENTION Indicates consistency of inventory file and system software.				current
AprisaXETableCommand TEXTUAL-CONVENTION A command sent to add or delete table entries.				current
AprisaXETdmBus TEXTUAL-CONVENTION This is used to set the TDM bus to use.				current
AprisaXETdmPortType TEXTUAL-CONVENTION This is used to set the port out to the TDM bus.				current