MIBs Depot

APRISAXE-MIB-4RF

Registered at
1.3.6.1.4.1.14817.2.5
1.3.6.1.4.1.14817.7.3.1
Last updated
2007-04-30 00:00
Organization
www.4rf.com
Revisions
2007-04-30 00:00, 2004-12-09 03:04
Namespace
4rf
Source file
APRISAXE-MIB-4RF
Digest
sha256:c2bcf73296188f5a2b2008225aae3bfa287b6aaca1906f3f50d1abd3aed39e89

Description

MIB for the AprisaXE project

Contact

postal: 4RF Communications Ltd 26 Glover Street Ngauranga PO Box 13-506 Wellington 6032 New Zealand phone: +64 4 499 6000 email: support@4rf.com

Imports

FromSymbols
APRISAXE-TC-4RFAprisaXE2WireSignalState, AprisaXE4WInputLevel, AprisaXE4WOutputLevel, AprisaXE4WRxGain, AprisaXE4WTxGain, AprisaXEAdcVoltage, AprisaXEAdpcmCompression, AprisaXEAlarmMapping, AprisaXEAlarmOutput, AprisaXEAlarmPolarity, AprisaXEAlarmSource, AprisaXEAlarmType, AprisaXECCActivationStatus, AprisaXECardType, AprisaXEChannelControlType, AprisaXEConnectionID, AprisaXEDataStatus, AprisaXEDbValue, AprisaXEDefaultAction, AprisaXEEthernetFrameRate, AprisaXEEthernetGroup, AprisaXEEthernetGrouping, AprisaXEEthernetPortNumber, AprisaXEEthernetPortPriority, AprisaXEEthernetPrioQueueMapping, AprisaXEEthernetPrioQueueScheduling, AprisaXEFXOCountry, AprisaXEFXOInputLevel, AprisaXEFXOOutputLevel, AprisaXEFXSInputLevel, AprisaXEFXSOutputLevel, AprisaXEFXSPMLevel, AprisaXEFXSPathMute, AprisaXEHardwareVersion, AprisaXEHssSerialMode, AprisaXEIQData, AprisaXEInterfaceCnxnType, AprisaXEPSCActiveRadio, AprisaXEPSCActiveTx, AprisaXEPcmLaw, AprisaXEPcmMode, AprisaXEPortNumber, AprisaXEQuadJetConnectionType, AprisaXEQuadJetLineEncoding, AprisaXEQuadJetLoopbacks, AprisaXEQuadJetMultiframeEnable, AprisaXEQuadJetTrafficType, AprisaXEQuadJetWaveFormShapers, AprisaXESerialEquipmentMode, AprisaXESignalState, AprisaXESlotNumber, AprisaXETdmBus, AprisaXETdmPortType
COMMON-TC-4RFFourRFAlarmEnabled, FourRFAlarmPresent, FourRFAlarmSeverity, FourRFAlarmStatus, FourRFChannelWidth, FourRFClockSource, FourRFErrorCounter, FourRFFanStatus, FourRFFrequency, FourRFHardwareVersion, FourRFImageVersion, FourRFLoopback, FourRFMHSBCommand, FourRFMHSBStatus, FourRFModulationType, FourRFNetworkClockSelect, FourRFNetworkClockStatus, FourRFProcessResultType, FourRFRSSI, FourRFRfBand, FourRFSNR, FourRFSerialNumber, FourRFTemperature, FourRFTxPower
MIB-4RFfourRFModules
PRODUCTS-MIB-4RFfourRFAprisaXE
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

APRISAXE-MIB-4RF
APRISAXE-TC-4RF
COMMON-TC-4RF
MIB-4RF
PRODUCTS-MIB-4RF
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.14817.7.3.1.2aprisaXEObjects
1.3.6.1.4.1.14817.7.3.1.3aprisaXEEvents

Objects

NameOIDSyntaxAccessStatus
aprisaXEConfig
OBJECT-IDENTITY
The root of the OID sub-tree for the AprisaXE product configuration.
1.3.6.1.4.1.14817.7.3.1current
aprisaXEGroups
OBJECT-IDENTITY
The root of the OID sub-tree for the AprisaXE object groups.
1.3.6.1.4.1.14817.7.3.1.1current
aprisaXEObjects
OBJECT-IDENTITY
The root of the OID sub-tree for the AprisaXE product objects.
1.3.6.1.4.1.14817.7.3.1.2current
aprisaXETerminal
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.1
aprisaXETerminalRfChannelWidth
OBJECT-TYPE
The terminal RF channel width, the options are: 20kHz, 25kHz, 50kHz, 75kHz, 100kHz, 125kHz, 150kHz, 200kHz, 250kHz, 400kHz, 500kHz, 800kHz, 1MHz, 1.25MHz, 1.75MHz, 2MHz, 3.5MHz, 7MHz
1.3.6.1.4.1.14817.7.3.1.2.1.4FourRFChannelWidthread-writecurrent
aprisaXETerminalRSSI
OBJECT-TYPE
The terminal RSSI in dBm.
1.3.6.1.4.1.14817.7.3.1.2.1.5FourRFRSSIread-onlycurrent
aprisaXETerminalModulationState
OBJECT-TYPE
The terminal modulation state.
1.3.6.1.4.1.14817.7.3.1.2.1.6FourRFModulationTyperead-writecurrent
aprisaXETerminalClockReference
OBJECT-TYPE
The terminal clock reference configuration: automatic - manual -
1.3.6.1.4.1.14817.7.3.1.2.1.7INTEGER {automatic(0), manual(1)}read-writecurrent
aprisaXETerminalClockSource
OBJECT-TYPE
The terminal clock source configuration: network - clocking is recovered from the synchronous network to which the terminal is connected. link - clocking is recovered from the remote end of the link. internal - the clock is generated internally. The clock reference must be in manual mode for this to take effect.
1.3.6.1.4.1.14817.7.3.1.2.1.8FourRFClockSourceread-writecurrent
aprisaXETerminalAlarmStatus
OBJECT-TYPE
The terminal alarm status, this reflects the overall status of the terminal. This will match the colour of the front panel control LED. The states used are noAlarm, minorAlarm and majorAlarm.
1.3.6.1.4.1.14817.7.3.1.2.1.9FourRFAlarmStatusread-onlycurrent
aprisaXETerminalRxAlarmStatus
OBJECT-TYPE
The terminal alarm status, this reflects the overall RX status of the terminal. This will match the colour of the front panel RX LED. The states used are noAlarm, minorAlarm and majorAlarm.
1.3.6.1.4.1.14817.7.3.1.2.1.10FourRFAlarmStatusread-onlycurrent
aprisaXETerminalTxAlarmStatus
OBJECT-TYPE
The terminal alarm status, this reflects the overall TX status of the terminal. This will match the colour of the front panel TX LED. The states used are noAlarm, minorAlarm and majorAlarm.
1.3.6.1.4.1.14817.7.3.1.2.1.11FourRFAlarmStatusread-onlycurrent
aprisaXETerminalBandwidth
OBJECT-TYPE
This returns the total bandwidth available over the link in kbps.
1.3.6.1.4.1.14817.7.3.1.2.1.12Unsigned32read-onlycurrent
aprisaXEMotherboardSerialNumber
OBJECT-TYPE
The unique serial number for the motherboard.
1.3.6.1.4.1.14817.7.3.1.2.1.13FourRFSerialNumberread-onlycurrent
aprisaXETerminalAllocatedBandwidth
OBJECT-TYPE
This returns the total bandwidth allocated over the link in kbps.
1.3.6.1.4.1.14817.7.3.1.2.1.14Unsigned32read-onlycurrent
aprisaXETerminalLoopbackBandwidth
OBJECT-TYPE
This returns the total loopback bandwidth allocated in kbps.
1.3.6.1.4.1.14817.7.3.1.2.1.15Unsigned32read-onlycurrent
aprisaXETerminalNetworkClockPrimaryStatus
OBJECT-TYPE
This returns the status of the network clock primary source.
1.3.6.1.4.1.14817.7.3.1.2.1.16FourRFNetworkClockStatusread-onlycurrent
aprisaXETerminalNetworkClockSecondaryStatus
OBJECT-TYPE
This returns the status of the network clock secondary source.
1.3.6.1.4.1.14817.7.3.1.2.1.17FourRFNetworkClockStatusread-onlycurrent
aprisaXETerminalNetworkClockCommand
OBJECT-TYPE
Forces a change in the active network clock.
1.3.6.1.4.1.14817.7.3.1.2.1.18INTEGER {none(0), makePrimaryActive(1), makeSecondaryActive(2)}read-writecurrent
aprisaXETerminalStartupComplete
OBJECT-TYPE
Indicates whether the terminal startup sequence is complete.
1.3.6.1.4.1.14817.7.3.1.2.1.19INTEGER {notComplete(0), startupComplete(1)}read-onlycurrent
aprisaXETerminalImageAlarmClear
OBJECT-TYPE
Indicates whether the terminal startup sequence is complete.
1.3.6.1.4.1.14817.7.3.1.2.1.20INTEGER {noCommand(0), clearAlternateImageAlarm(1), clearDefaultImageAlarm(2)}read-writecurrent
aprisaXETerminalMuxStatus
OBJECT-TYPE
This indicates if the terminal is operating in Mux mode.
1.3.6.1.4.1.14817.7.3.1.2.1.21INTEGER {none(0), muxOnly(1)}read-onlyobsolete
aprisaXETerminalBootloaderDataVersion
OBJECT-TYPE
This indicates the data version of the shared data field in the bootloader.
1.3.6.1.4.1.14817.7.3.1.2.1.22Unsigned32read-onlycurrent
aprisaXETerminalUploadFailAlarmClear
OBJECT-TYPE
Used to clear a current Upload Failure Alarm.
1.3.6.1.4.1.14817.7.3.1.2.1.23INTEGER {noCommand(0), clearUploadFailAlarm(1)}read-writecurrent
aprisaXETerminalEquipmentType
OBJECT-TYPE
This indicates what type of equipment the terminal is.
1.3.6.1.4.1.14817.7.3.1.2.1.24INTEGER {axeUnknown(0), axeRadio(1), axeMux(2), axeProtSwitch(3), axeProtRadio(4)}read-onlycurrent
aprisaXEPerformance
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.6
aprisaXECorrectableErrorCount
OBJECT-TYPE
The terminal correctable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.1FourRFErrorCounterread-onlycurrent
aprisaXEUncorrectableErrorCount
OBJECT-TYPE
The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.2FourRFErrorCounterread-onlycurrent
aprisaXEModemSNR
OBJECT-TYPE
The modem signal to noise ratio.
1.3.6.1.4.1.14817.7.3.1.2.6.3FourRFSNRread-onlycurrent
aprisaXETxPacketCount
OBJECT-TYPE
The terminal transmitted ethernet packet count (to link).
1.3.6.1.4.1.14817.7.3.1.2.6.4Counter32read-onlycurrent
aprisaXERxPacketCount
OBJECT-TYPE
The terminal received ethernet packet count (from link).
1.3.6.1.4.1.14817.7.3.1.2.6.5Counter32read-onlycurrent
aprisaXERxPacketErrorCount
OBJECT-TYPE
The terminal received ethernet packet error count (from link).
1.3.6.1.4.1.14817.7.3.1.2.6.6Counter32read-onlycurrent
aprisaXEErrorCounterCommand
OBJECT-TYPE
Forces reset, freeze or unfreeze the error counters.
1.3.6.1.4.1.14817.7.3.1.2.6.7INTEGER {countersRunning(0), resetCounters(1), freezeCounters(2), unfreezeCounters(3)}read-writecurrent
aprisaXEErrorFreeSeconds
OBJECT-TYPE
The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.8Counter32read-onlycurrent
aprisaXEErroredSeconds
OBJECT-TYPE
The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.9Counter32read-onlycurrent
aprisaXEBERExponent
OBJECT-TYPE
The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.10DisplayString (SIZE(0..64))read-onlycurrent
aprisaXEPscSysUncorrectableErrorCount
OBJECT-TYPE
The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.11DisplayString (SIZE(0..64))read-onlycurrent
aprisaXEPscSysErrorFreeSeconds
OBJECT-TYPE
The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.12Counter32read-onlycurrent
aprisaXEPscSysErroredSeconds
OBJECT-TYPE
The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.13Counter32read-onlycurrent
aprisaXEPscSysBERExponent
OBJECT-TYPE
The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.14DisplayString (SIZE(0..64))read-onlycurrent
aprisaXEPscRadioAUncorrectableErrorCount
OBJECT-TYPE
The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.15FourRFErrorCounterread-onlycurrent
aprisaXEPscRadioAErrorFreeSeconds
OBJECT-TYPE
The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.16Counter32read-onlycurrent
aprisaXEPscRadioAErroredSeconds
OBJECT-TYPE
The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.17Counter32read-onlycurrent
aprisaXEPscRadioABERExponent
OBJECT-TYPE
The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.18DisplayString (SIZE(0..64))read-onlycurrent
aprisaXEPscRadioBUncorrectableErrorCount
OBJECT-TYPE
The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.19FourRFErrorCounterread-onlycurrent
aprisaXEPscRadioBErrorFreeSeconds
OBJECT-TYPE
The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.20Counter32read-onlycurrent
aprisaXEPscRadioBErroredSeconds
OBJECT-TYPE
The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.21Counter32read-onlycurrent
aprisaXEPscRadioBBERExponent
OBJECT-TYPE
The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.22DisplayString (SIZE(0..64))read-onlycurrent
aprisaXEExternalAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.11
aprisaXEExternalAlarm1
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.11.1
aprisaXEExternalAlarm1Status
OBJECT-TYPE
The status of the first external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.1.1FourRFAlarmStatusread-onlycurrent
aprisaXEExternalAlarm1Severity
OBJECT-TYPE
The severity of the first external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.1.2FourRFAlarmSeverityread-writecurrent
aprisaXEExternalAlarm1Enabled
OBJECT-TYPE
Indicates whether the first external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.11.1.3FourRFAlarmEnabledread-writecurrent
aprisaXEExternalAlarm1Mapping
OBJECT-TYPE
This defines how the first external alarm input is mapped to the remote alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.1.4AprisaXEAlarmMappingread-writecurrent
aprisaXEExternalAlarm1Description
OBJECT-TYPE
A description (user defined) for the external alarm.
1.3.6.1.4.1.14817.7.3.1.2.11.1.5DisplayString (SIZE(0..64))read-writecurrent
aprisaXEExternalAlarm2
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.11.2
aprisaXEExternalAlarm2Status
OBJECT-TYPE
The status of the second external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.2.1FourRFAlarmStatusread-onlycurrent
aprisaXEExternalAlarm2Severity
OBJECT-TYPE
The severity of the second external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.2.2FourRFAlarmSeverityread-writecurrent
aprisaXEExternalAlarm2Enabled
OBJECT-TYPE
Indicates whether the second external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.11.2.3FourRFAlarmEnabledread-writecurrent
aprisaXEExternalAlarm2Mapping
OBJECT-TYPE
This defines how the second external alarm input is mapped to the remote alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.2.4AprisaXEAlarmMappingread-writecurrent
aprisaXEExternalAlarm2Description
OBJECT-TYPE
A description (user defined) for the external alarm.
1.3.6.1.4.1.14817.7.3.1.2.11.2.5DisplayString (SIZE(0..64))read-writecurrent
aprisaXEExternalAlarmPolarity
OBJECT-TYPE
Indicates the polarity used to indicate the presence of an alarm at an external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.3AprisaXEAlarmPolarityread-writecurrent
aprisaXEExternalAlarmOutputPolarity
OBJECT-TYPE
Indicates the polarity used to indicate the presence of an alarm at an external alarm output, this may be different from the input polarity.
1.3.6.1.4.1.14817.7.3.1.2.11.4INTEGER {polarityClosed(0), polarityOpen(1)}read-writecurrent
aprisaXEExternalAlarmOutputOne
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.11.5
aprisaXEExternalAlarmOutputOneStatus
OBJECT-TYPE
The status of the first external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.5.1FourRFAlarmStatusread-onlycurrent
aprisaXEExternalAlarmOutputOneMapping
OBJECT-TYPE
This defines how the first external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.5.2AprisaXEAlarmMappingread-writecurrent
aprisaXEExternalAlarmOutputTwo
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.11.6
aprisaXEExternalAlarmOutputTwoStatus
OBJECT-TYPE
The status of the second external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.6.1FourRFAlarmStatusread-onlycurrent
aprisaXEExternalAlarmOutputTwoMapping
OBJECT-TYPE
This defines how the second external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.6.2AprisaXEAlarmMappingread-writecurrent
aprisaXEExternalAlarmOutputThree
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.11.7
aprisaXEExternalAlarmOutputThreeStatus
OBJECT-TYPE
The status of the third external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.7.1FourRFAlarmStatusread-onlycurrent
aprisaXEExternalAlarmOutputThreeMapping
OBJECT-TYPE
This defines how the third external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.7.2AprisaXEAlarmMappingread-writecurrent
aprisaXEExternalAlarmOutputFour
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.11.8
aprisaXEExternalAlarmOutputFourStatus
OBJECT-TYPE
The status of the fourth external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.8.1FourRFAlarmStatusread-onlycurrent
aprisaXEExternalAlarmOutputFourMapping
OBJECT-TYPE
This defines how the fourth external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.8.2AprisaXEAlarmMappingread-writecurrent
aprisaXERemoteAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.16
aprisaXEMajorRemoteAlarmStatus
OBJECT-TYPE
The status of the remote major alarm.
1.3.6.1.4.1.14817.7.3.1.2.16.1FourRFAlarmStatusread-onlyobsolete
aprisaXEMajorRemoteAlarmOutput
OBJECT-TYPE
This defines how the remote major alarm is mapped to the external alarm outputs.
1.3.6.1.4.1.14817.7.3.1.2.16.2AprisaXEAlarmOutputread-writeobsolete
aprisaXEMinorRemoteAlarmStatus
OBJECT-TYPE
The status of the remote minor alarm.
1.3.6.1.4.1.14817.7.3.1.2.16.10FourRFAlarmStatusread-onlyobsolete
aprisaXEMinorRemoteAlarmOutput
OBJECT-TYPE
This defines how the remote minor alarm is mapped to the external alarm outputs.
1.3.6.1.4.1.14817.7.3.1.2.16.11AprisaXEAlarmOutputread-writeobsolete
aprisaXEMHSB
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.19
aprisaXEMHSBStatus
OBJECT-TYPE
The state of an MHSB configured terminal.
1.3.6.1.4.1.14817.7.3.1.2.19.1FourRFMHSBStatusread-onlycurrent
aprisaXEMHSBEnable
OBJECT-TYPE
Set the terminal into Monitored Hot Standby Mode.
1.3.6.1.4.1.14817.7.3.1.2.19.2INTEGER {disabled(0), enabled(1)}read-writecurrent
aprisaXEMHSBCommand
OBJECT-TYPE
Commands to apply while in MHSB mode.
1.3.6.1.4.1.14817.7.3.1.2.19.3FourRFMHSBCommandread-writecurrent
aprisaXEMHSBTerminalSelect
OBJECT-TYPE
Configure terminal as terminal A or terminal B of an MHSB pair.
1.3.6.1.4.1.14817.7.3.1.2.19.4INTEGER {none(0), terminalA(1), terminalB(2)}read-writecurrent
aprisaXEMHSBSwitchoverStatus
OBJECT-TYPE
Status of the alarm reflecting if a switchover has occurred.
1.3.6.1.4.1.14817.7.3.1.2.19.5FourRFAlarmStatusread-onlycurrent
aprisaXEFans
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.21
aprisaXEFan1Status
OBJECT-TYPE
The status of the fan one.
1.3.6.1.4.1.14817.7.3.1.2.21.1FourRFFanStatusread-onlycurrent
aprisaXEFan2Status
OBJECT-TYPE
The status of the fan two.
1.3.6.1.4.1.14817.7.3.1.2.21.2FourRFFanStatusread-onlycurrent
aprisaXEFanEnable
OBJECT-TYPE
Turn the fans on or off.
1.3.6.1.4.1.14817.7.3.1.2.21.3INTEGER {fansDisabled(0), fansEnabled(1)}read-writecurrent
aprisaXEAlarmTable
OBJECT-TYPE
This table stores the currently active alarms. Up to 500 separate alarms will be stored in the table.
1.3.6.1.4.1.14817.7.3.1.2.26not-accessiblecurrent
aprisaXEAlarmEntry
OBJECT-TYPE
The table entry index specification, just the alarm index.
1.3.6.1.4.1.14817.7.3.1.2.26.1not-accessiblecurrent
aprisaXEAlarmIndex
OBJECT-TYPE
The index into the alarm table.
1.3.6.1.4.1.14817.7.3.1.2.26.1.1INTEGER (0..500)read-onlycurrent
aprisaXEAlarmSlot
OBJECT-TYPE
The number of the slot generating the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.2AprisaXESlotNumberread-onlycurrent
aprisaXEAlarmSource
OBJECT-TYPE
The source of the alarm, a card type or external.
1.3.6.1.4.1.14817.7.3.1.2.26.1.3AprisaXEAlarmSourceread-onlycurrent
aprisaXEAlarmPort
OBJECT-TYPE
The source port of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.4AprisaXEPortNumberread-onlycurrent
aprisaXEAlarmSeverity
OBJECT-TYPE
The severity of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.5FourRFAlarmSeverityread-onlycurrent
aprisaXEAlarmType
OBJECT-TYPE
The type of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.6AprisaXEAlarmTyperead-onlycurrent
aprisaXEAlarmTime
OBJECT-TYPE
The time that the alarm occurred.
1.3.6.1.4.1.14817.7.3.1.2.26.1.7DisplayStringread-onlycurrent
aprisaXEAlarmHistoryTable
OBJECT-TYPE
This table stores a history of the alarms as they become active and cleared.
1.3.6.1.4.1.14817.7.3.1.2.31not-accessiblecurrent
aprisaXEAlarmHistoryEntry
OBJECT-TYPE
The table entry index specification, just the alarm index.
1.3.6.1.4.1.14817.7.3.1.2.31.1not-accessiblecurrent
aprisaXEAlarmHistoryIndex
OBJECT-TYPE
The index into the alarm history table.
1.3.6.1.4.1.14817.7.3.1.2.31.1.1INTEGER (0..100)read-onlycurrent
aprisaXEAlarmHistorySlot
OBJECT-TYPE
The number of the slot generating the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.2AprisaXESlotNumberread-onlycurrent
aprisaXEAlarmHistorySource
OBJECT-TYPE
The source of the alarm, a card type or external.
1.3.6.1.4.1.14817.7.3.1.2.31.1.3AprisaXEAlarmSourceread-onlycurrent
aprisaXEAlarmHistoryPort
OBJECT-TYPE
The source port of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.4AprisaXEPortNumberread-onlycurrent
aprisaXEAlarmHistorySeverity
OBJECT-TYPE
The severity of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.5FourRFAlarmSeverityread-onlycurrent
aprisaXEAlarmHistoryType
OBJECT-TYPE
The type of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.6AprisaXEAlarmTyperead-onlycurrent
aprisaXEAlarmHistoryPresent
OBJECT-TYPE
Indicates whether the alarm is present or not.
1.3.6.1.4.1.14817.7.3.1.2.31.1.7FourRFAlarmPresentread-onlycurrent
aprisaXEAlarmHistoryTime
OBJECT-TYPE
The time that the alarm state change occurred.
1.3.6.1.4.1.14817.7.3.1.2.31.1.8DisplayStringread-onlycurrent
aprisaXEAlarmControl
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.32
aprisaXEAlarmHistoryCommand
OBJECT-TYPE
Allows the alarm history table to be cleared.
1.3.6.1.4.1.14817.7.3.1.2.32.1INTEGER {noCommand(0), clearHistory(1)}read-writecurrent
aprisaXETransmitter
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.36
aprisaXETransmitterStatus
OBJECT-TYPE
Indicates whether the transmitter is currently on or off.
1.3.6.1.4.1.14817.7.3.1.2.36.1INTEGER {transmitterOff(0), transmitterOn(1)}read-onlycurrent
aprisaXETransmitterCommand
OBJECT-TYPE
Commands used to control the transmitter, currently the transmitter can be switched on and off. No other commands are defined.
1.3.6.1.4.1.14817.7.3.1.2.36.2INTEGER {noCommand(0), transmitterOff(1), transmitterOn(2)}read-writecurrent
aprisaXETransmitterSynthesiserStatus
OBJECT-TYPE
The status of the transmitter synthesiser.
1.3.6.1.4.1.14817.7.3.1.2.36.3FourRFAlarmStatusread-onlycurrent
aprisaXETransmitter5VPowerStatus
OBJECT-TYPE
The status of the transmitter 5V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.4FourRFAlarmStatusread-onlycurrent
aprisaXETransmitter11VPowerStatus
OBJECT-TYPE
The status of the transmitter 11V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.5FourRFAlarmStatusread-onlycurrent
aprisaXETransmitter28VPowerStatus
OBJECT-TYPE
The status of the transmitter 28V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.6FourRFAlarmStatusread-onlycurrent
aprisaXETransmitterFrequency
OBJECT-TYPE
The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency value should be supplied in Hz.
1.3.6.1.4.1.14817.7.3.1.2.36.7FourRFFrequencyread-writecurrent
aprisaXETransmitterPower
OBJECT-TYPE
The TX power value, the value should be entered in dB.
1.3.6.1.4.1.14817.7.3.1.2.36.8FourRFTxPowerread-writecurrent
aprisaXETransmitterAGC
OBJECT-TYPE
The Automatic Gain Control value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.9AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitterForwardPower
OBJECT-TYPE
The forward power measurement value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.10AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitterReversePower
OBJECT-TYPE
The reverse power value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.11AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitterTemperature
OBJECT-TYPE
The temperature value in degrees Celcius.
1.3.6.1.4.1.14817.7.3.1.2.36.12FourRFTemperatureread-onlyobsolete
aprisaXETransmitterVTune
OBJECT-TYPE
The voltage output from TX synth.
1.3.6.1.4.1.14817.7.3.1.2.36.13AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitter28VSupply
OBJECT-TYPE
The 28V supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.14AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitter11VSupply
OBJECT-TYPE
The 11V supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.15AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitter5VDigitalSupply
OBJECT-TYPE
The 5V digital supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.16AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitter7VSupply
OBJECT-TYPE
The 7V RF supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.17AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitter9VSupply
OBJECT-TYPE
The 9V supply synthesiser rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.18AprisaXEAdcVoltageread-onlyobsolete
aprisaXETransmitterCharacterisationDataStatus
OBJECT-TYPE
The status of the transmitter characterisation data.
1.3.6.1.4.1.14817.7.3.1.2.36.19AprisaXEDataStatusread-onlycurrent
aprisaXETransmitterSerialNumber
OBJECT-TYPE
The unique module serial number for the transmitter.
1.3.6.1.4.1.14817.7.3.1.2.36.20FourRFSerialNumberread-onlycurrent
aprisaXETransmitterReturnLoss
OBJECT-TYPE
The return loss for the transmitter.
1.3.6.1.4.1.14817.7.3.1.2.36.21AprisaXEDbValueread-onlycurrent
aprisaXETransmitterMibDataStatus
OBJECT-TYPE
The status of the transmitter MIB data.
1.3.6.1.4.1.14817.7.3.1.2.36.22AprisaXEDataStatusread-onlycurrent
aprisaXETransmitterADCChZero
OBJECT-TYPE
The TX adc ch zero voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.23AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChOne
OBJECT-TYPE
The TX adc ch one voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.24AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChTwo
OBJECT-TYPE
The TX adc ch two voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.25AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChThree
OBJECT-TYPE
The TX adc ch three voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.26AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChFour
OBJECT-TYPE
The TX adc ch four voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.27AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChFive
OBJECT-TYPE
The TX adc ch five voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.28AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChSix
OBJECT-TYPE
The TX adc ch six voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.29AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChSeven
OBJECT-TYPE
The TX adc ch seven voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.30AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChEight
OBJECT-TYPE
The TX adc ch eight voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.31AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChNine
OBJECT-TYPE
The TX adc ch nine voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.32AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChTen
OBJECT-TYPE
The TX adc ch ten voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.33AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterADCChEleven
OBJECT-TYPE
The TX adc ch eleven voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.34AprisaXEAdcVoltageread-onlycurrent
aprisaXETransmitterNeg5VPowerStatus
OBJECT-TYPE
The status of the transmitter Negative 5V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.35FourRFAlarmStatusread-onlycurrent
aprisaXETransmitterAmplifierBalanceStatus
OBJECT-TYPE
The status of the transmitter Balanced Power Amplifier.
1.3.6.1.4.1.14817.7.3.1.2.36.36FourRFAlarmStatusread-onlycurrent
aprisaXETransmitterTcxoAdjustment
OBJECT-TYPE
The TX TCXO adjustment to be made by the customer, to tune the TCXO. This is a shift in DAC steps.
1.3.6.1.4.1.14817.7.3.1.2.36.37INTEGER {txTCXOAdjustmentPosFive(0), txTCXOAdjustmentPosOne(1), txTCXOAdjustmentZero(2), txTCXOAdjustmentNegOne(3), txTCXOAdjustmentNegFive(4)}read-writecurrent
aprisaXETransmitterSynthFileVersion
OBJECT-TYPE
The version of the Synth File loaded from the filesystem.
1.3.6.1.4.1.14817.7.3.1.2.36.38INTEGER (0..999)read-onlycurrent
aprisaXETransmitterOperationalDataVersion
OBJECT-TYPE
The version of the operational data for the transmitter.
1.3.6.1.4.1.14817.7.3.1.2.36.39DisplayStringread-onlycurrent
aprisaXETransmitterSwCompatibility
OBJECT-TYPE
The transmitter software compatibility number.
1.3.6.1.4.1.14817.7.3.1.2.36.40INTEGER (0..999)read-onlycurrent
aprisaXEReceiver
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.51
aprisaXEReceiverStatus
OBJECT-TYPE
Status of the receiver, currently the receiver can be On/Off and the loopback can be On/Off.
1.3.6.1.4.1.14817.7.3.1.2.51.1INTEGER {receiverOff(0), receiverOn(1)}read-onlycurrent
aprisaXEReceiverCommand
OBJECT-TYPE
Commands used to control the receiver, currently the receiver can be switched on and off and the loopback option switched on and off.
1.3.6.1.4.1.14817.7.3.1.2.51.2INTEGER {noCommand(0), receiverOff(1), receiverOn(2)}read-writecurrent
aprisaXEReceiverSynthesiserStatus
OBJECT-TYPE
The status of the receiver synthesiser.
1.3.6.1.4.1.14817.7.3.1.2.51.3FourRFAlarmStatusread-onlycurrent
aprisaXEReceiver12VPowerStatus
OBJECT-TYPE
The status of the Receiver 12V power supply.
1.3.6.1.4.1.14817.7.3.1.2.51.4FourRFAlarmStatusread-onlycurrent
aprisaXEReceiverFrequency
OBJECT-TYPE
The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency value should be supplied in Hz.
1.3.6.1.4.1.14817.7.3.1.2.51.5FourRFFrequencyread-writecurrent
aprisaXEReceiverRSSI
OBJECT-TYPE
The characterised RSSI Voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.6FourRFRSSIread-onlycurrent
aprisaXEReceiverTemperature
OBJECT-TYPE
The temperature value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.8FourRFTemperatureread-onlycurrent
aprisaXEReceiverVTune
OBJECT-TYPE
The voltage output from RX synth value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.9AprisaXEAdcVoltageread-onlyobsolete
aprisaXEReceiver9VSupply
OBJECT-TYPE
The 9V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.10AprisaXEAdcVoltageread-onlyobsolete
aprisaXEReceiver5VSupply
OBJECT-TYPE
The 5V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.11AprisaXEAdcVoltageread-onlyobsolete
aprisaXEReceiverModemAGC
OBJECT-TYPE
The modem AGC, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.12AprisaXEAdcVoltageread-onlyobsolete
aprisaXEReceiverNeg1V5Supply
OBJECT-TYPE
The -1.5V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.13AprisaXEAdcVoltageread-onlyobsolete
aprisaXEReceiver3V3Supply
OBJECT-TYPE
The 3.3V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.14AprisaXEAdcVoltageread-onlyobsolete
aprisaXEReceiverDacTest
OBJECT-TYPE
The DacTest value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.15AprisaXEAdcVoltageread-onlyobsolete
aprisaXEReceiverCharacterisationDataStatus
OBJECT-TYPE
The status of the receiver characterisation data.
1.3.6.1.4.1.14817.7.3.1.2.51.16AprisaXEDataStatusread-onlycurrent
aprisaXEReceiverSerialNumber
OBJECT-TYPE
The unique module serial number for the receiver.
1.3.6.1.4.1.14817.7.3.1.2.51.17FourRFSerialNumberread-onlycurrent
aprisaXEReceiverRfLoopback
OBJECT-TYPE
Enables and disabled RF loopback.
1.3.6.1.4.1.14817.7.3.1.2.51.18FourRFLoopbackread-writecurrent
aprisaXEReceiverRfLoopbackTimeout
OBJECT-TYPE
The number of seconds after which RF loopback should timeout.
1.3.6.1.4.1.14817.7.3.1.2.51.19Unsigned32read-writecurrent
aprisaXEReceiverMibDataStatus
OBJECT-TYPE
The status of the receiver MIB data.
1.3.6.1.4.1.14817.7.3.1.2.51.20AprisaXEDataStatusread-onlycurrent
aprisaXEReceiverADCChZero
OBJECT-TYPE
The RX adc ch zero voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.21AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChOne
OBJECT-TYPE
The RX adc ch one voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.22AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChTwo
OBJECT-TYPE
The RX adc ch two voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.23AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChThree
OBJECT-TYPE
The RX adc ch three voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.24AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChFour
OBJECT-TYPE
The RX adc ch four voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.25AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChFive
OBJECT-TYPE
The RX adc ch five voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.26AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChSix
OBJECT-TYPE
The RX adc ch six voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.27AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChSeven
OBJECT-TYPE
The RX adc ch seven voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.28AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChEight
OBJECT-TYPE
The RX adc ch eight voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.29AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChNine
OBJECT-TYPE
The RX adc ch nine voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.30AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverADCChTen
OBJECT-TYPE
The RX adc ch ten voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.31AprisaXEAdcVoltageread-onlycurrent
aprisaXEReceiverRSSIThresQPSKLowerOn
OBJECT-TYPE
The QPSK Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.32Integer32 (-110..-40)read-writecurrent
aprisaXEReceiverRSSIThres16QAMLowerOn
OBJECT-TYPE
The 16QAM Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.33Integer32 (-110..-40)read-writecurrent
aprisaXEReceiverRSSIThres32QAMLowerOn
OBJECT-TYPE
The 32QAM Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.34Integer32 (-110..-40)read-writecurrent
aprisaXEReceiverRSSIThres64QAMLowerOn
OBJECT-TYPE
The 64QAM Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.35Integer32 (-110..-40)read-writecurrent
aprisaXEReceiverSynthFileVersion
OBJECT-TYPE
The version of the Synth File loaded from the filesystem.
1.3.6.1.4.1.14817.7.3.1.2.51.36INTEGER (0..999)read-onlycurrent
aprisaXEReceiverOperationalDataVersion
OBJECT-TYPE
The version of the operational data of the receiver.
1.3.6.1.4.1.14817.7.3.1.2.51.37DisplayStringread-onlycurrent
aprisaXEReceiverSwCompatibility
OBJECT-TYPE
The receiver software compatibility number.
1.3.6.1.4.1.14817.7.3.1.2.51.38INTEGER (0..999)read-onlycurrent
aprisaXEModem
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.61
aprisaXEModemDemodAligmentStatus
OBJECT-TYPE
Status of the demodulator alignment.
1.3.6.1.4.1.14817.7.3.1.2.61.1FourRFAlarmStatusread-onlycurrent
aprisaXEModemTdmAligmentStatus
OBJECT-TYPE
Status of the TDM alignment.
1.3.6.1.4.1.14817.7.3.1.2.61.2FourRFAlarmStatusread-onlycurrent
aprisaXEModemRefAStatus
OBJECT-TYPE
Status of the REFa clock.
1.3.6.1.4.1.14817.7.3.1.2.61.3FourRFAlarmStatusread-onlycurrent
aprisaXEModemRefBStatus
OBJECT-TYPE
Status of the REFb clock.
1.3.6.1.4.1.14817.7.3.1.2.61.4FourRFAlarmStatusread-onlycurrent
aprisaXEModemUncorrectableBlockCount
OBJECT-TYPE
Count of uncorrectable blocks since last read.
1.3.6.1.4.1.14817.7.3.1.2.61.5FourRFErrorCounterread-onlycurrent
aprisaXEModemIQData
OBJECT-TYPE
A list of I/Q data pairs, this is a sequence of byes values the first byte is an I value, the second a Q value.
1.3.6.1.4.1.14817.7.3.1.2.61.6AprisaXEIQDataread-onlycurrent
aprisaXEModemSyncStatus
OBJECT-TYPE
Status of the link lock.
1.3.6.1.4.1.14817.7.3.1.2.61.7FourRFAlarmStatusread-onlycurrent
aprisaXEModemFreqOffsetEnable
OBJECT-TYPE
Turn the Modulator frequency offset of 50kHz on or off.
1.3.6.1.4.1.14817.7.3.1.2.61.8INTEGER {offsetDisabled(0), offsetEnabled(1)}read-writecurrent
aprisaXEModemInterleaverEnable
OBJECT-TYPE
Interleaver being used on the modem. Trade off between link latency and FEC performance.
1.3.6.1.4.1.14817.7.3.1.2.61.9INTEGER {interleaverEnabled(100), interleaverDisabled(101), interleaverDefault(102)}read-writecurrent
aprisaXEModemQPSKCoding
OBJECT-TYPE
Encoding and Decoding being used for QPSK. Can be either Gray coded or non Gray coded.
1.3.6.1.4.1.14817.7.3.1.2.61.10INTEGER {grayCoded(0), nonGrayCoded(1)}read-writecurrent
aprisaXEModemConfigVersion
OBJECT-TYPE
Modem Configuration file version.
1.3.6.1.4.1.14817.7.3.1.2.61.11INTEGER (0..999)read-onlycurrent
aprisaXEBoardTable
OBJECT-TYPE
This table stores the basic information for the plugin slots.
1.3.6.1.4.1.14817.7.3.1.2.66not-accessiblecurrent
aprisaXEBoardEntry
OBJECT-TYPE
Slot Information.
1.3.6.1.4.1.14817.7.3.1.2.66.1not-accessiblecurrent
aprisaXEBoardSlot
OBJECT-TYPE
The slot number in which the board resides, the physical slots are numbered from zero to ten and mapped to one to eleven in the MIB. The motherboard is therefore in physical slot 0 but MIB slot 1.
1.3.6.1.4.1.14817.7.3.1.2.66.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEBoardType
OBJECT-TYPE
The type of the board in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in physical slot 9 - receiver : the receiver card, this will be in physical slot 10 - quadJET : e1/t1 4 port card
1.3.6.1.4.1.14817.7.3.1.2.66.1.2AprisaXECardTyperead-onlycurrent
aprisaXEExpectedBoardType
OBJECT-TYPE
The type of the board expected in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in physical slot 9 - receiver : the receiver card, this will be in physical slot 10 - quadJET : e1/t1 4 port card
1.3.6.1.4.1.14817.7.3.1.2.66.1.3AprisaXECardTyperead-writecurrent
aprisaXEBoardHardwareVersion
OBJECT-TYPE
Field indicating the hardware version for the board in the slot.
1.3.6.1.4.1.14817.7.3.1.2.66.1.4AprisaXEHardwareVersionread-onlycurrent
aprisaXEBoardFirmwareVersion
OBJECT-TYPE
Field indicating the firmware version for the board in the slot.
1.3.6.1.4.1.14817.7.3.1.2.66.1.5AprisaXEHardwareVersionread-onlycurrent
aprisaXEBoardHSCNumber
OBJECT-TYPE
Field indicating the hardware software configuration number for the board in the slot.
1.3.6.1.4.1.14817.7.3.1.2.66.1.6AprisaXEHardwareVersionread-onlycurrent
aprisaXEBoardSerialNumber
OBJECT-TYPE
Field indicating the module serial number for the card in the slot.
1.3.6.1.4.1.14817.7.3.1.2.66.1.7FourRFSerialNumberread-onlycurrent
aprisaXELinkAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86
aprisaXETransmitterAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1
aprisaXEForwardPowerHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.1
aprisaXEForwardPowerHiAlarmStatus
OBJECT-TYPE
The status of the forward power too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.1FourRFAlarmStatusread-onlyobsolete
aprisaXEForwardPowerHiAlarmSeverity
OBJECT-TYPE
The severity of the forward power too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.2FourRFAlarmSeverityread-onlyobsolete
aprisaXEForwardPowerHiAlarmEnabled
OBJECT-TYPE
Indicates whether the forward power too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.3FourRFAlarmEnabledread-onlyobsolete
aprisaXEForwardPowerHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the forward power too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.4Integer32read-onlyobsolete
aprisaXEForwardPowerHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the forward power alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.5Integer32read-onlyobsolete
aprisaXEForwardPowerLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.2
aprisaXEForwardPowerLoAlarmStatus
OBJECT-TYPE
The status of the forward power too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.1FourRFAlarmStatusread-onlyobsolete
aprisaXEForwardPowerLoAlarmSeverity
OBJECT-TYPE
The severity of the forward power too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.2FourRFAlarmSeverityread-onlyobsolete
aprisaXEForwardPowerLoAlarmEnabled
OBJECT-TYPE
Indicates whether the forward power too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.3FourRFAlarmEnabledread-onlyobsolete
aprisaXEForwardPowerLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the forward power too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.4Integer32read-onlyobsolete
aprisaXEForwardPowerLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the forward power too low alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.5Integer32read-onlyobsolete
aprisaXEReversePowerHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.3
aprisaXEReversePowerHiAlarmStatus
OBJECT-TYPE
The status of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.1FourRFAlarmStatusread-onlyobsolete
aprisaXEReversePowerHiAlarmSeverity
OBJECT-TYPE
The severity of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.2FourRFAlarmSeverityread-onlyobsolete
aprisaXEReversePowerHiAlarmEnabled
OBJECT-TYPE
Indicates whether the reverse power out of limits alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.3FourRFAlarmEnabledread-onlyobsolete
aprisaXEReversePowerHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the reverse power alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.4Integer32read-onlyobsolete
aprisaXEReversePowerHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the reverse power alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.5Integer32read-onlyobsolete
aprisaXEReversePowerLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.4
aprisaXEReversePowerLoAlarmStatus
OBJECT-TYPE
The status of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.1FourRFAlarmStatusread-onlyobsolete
aprisaXEReversePowerLoAlarmSeverity
OBJECT-TYPE
The severity of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.2FourRFAlarmSeverityread-onlyobsolete
aprisaXEReversePowerLoAlarmEnabled
OBJECT-TYPE
Indicates whether the reverse power out of limits alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.3FourRFAlarmEnabledread-onlyobsolete
aprisaXEReversePowerLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the reverse power alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.4Integer32read-onlyobsolete
aprisaXEReversePowerLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the reverse power alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.5Integer32read-onlyobsolete
aprisaXETxPaTempAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.5
aprisaXETxPaTempAlarmStatus
OBJECT-TYPE
The status of the transmitter temperature too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.1FourRFAlarmStatusread-onlyobsolete
aprisaXETxPaTempAlarmSeverity
OBJECT-TYPE
The severity of the transmitter temperature too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETxPaTempAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter temperature too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETxPaTempAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter temperature too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.4Integer32read-onlyobsolete
aprisaXETxPaTempAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter temperature too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.5Integer32read-onlyobsolete
aprisaXETxPaTempWarnAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.6
aprisaXETxPaTempWarnAlarmStatus
OBJECT-TYPE
The status of the transmitter temperature warning alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.1FourRFAlarmStatusread-onlyobsolete
aprisaXETxPaTempWarnAlarmSeverity
OBJECT-TYPE
The severity of the transmitter temperature warning alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETxPaTempWarnAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter temperature warning alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETxPaTempWarnAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter temperature warning alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.4Integer32read-onlyobsolete
aprisaXETxPaTempWarnAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter temperature warning will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.5Integer32read-onlyobsolete
aprisaXETxAgcHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.7
aprisaXETxAgcHiAlarmStatus
OBJECT-TYPE
The status of the transmitter AGC too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.1FourRFAlarmStatusread-onlyobsolete
aprisaXETxAgcHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter AGC too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETxAgcHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter AGC too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETxAgcHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter AGC too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.4Integer32read-onlyobsolete
aprisaXETxAgcHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter AGC too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.5Integer32read-onlyobsolete
aprisaXETxAgcLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.8
aprisaXETxAgcLoAlarmStatus
OBJECT-TYPE
The status of the transmitter AGC too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.1FourRFAlarmStatusread-onlyobsolete
aprisaXETxAgcLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter AGC too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETxAgcLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter AGC too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETxAgcLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter AGC too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.4Integer32read-onlyobsolete
aprisaXETxAgcLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter AGC too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.5Integer32read-onlyobsolete
aprisaXETxVtuneHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.9
aprisaXETxVtuneHiAlarmStatus
OBJECT-TYPE
The status of the transmitter VTUNE too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.1FourRFAlarmStatusread-onlyobsolete
aprisaXETxVtuneHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter VTUNE too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETxVtuneHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter VTUNE too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETxVtuneHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter VTUNE too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.4Integer32read-onlyobsolete
aprisaXETxVtuneHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter VTUNE too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.5Integer32read-onlyobsolete
aprisaXETxVtuneLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.10
aprisaXETxVtuneLoAlarmStatus
OBJECT-TYPE
The status of the transmitter VTUNE too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.1FourRFAlarmStatusread-onlyobsolete
aprisaXETxVtuneLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter VTUNE too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETxVtuneLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter VTUNE too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETxVtuneLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter VTUNE too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.4Integer32read-onlyobsolete
aprisaXETxVtuneLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter VTUNE too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.5Integer32read-onlyobsolete
aprisaXETx5VDigHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.11
aprisaXETx5VDigHiAlarmStatus
OBJECT-TYPE
The status of the transmitter 5V digital voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx5VDigHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 5V digital voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx5VDigHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 5V digital voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx5VDigHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 5V digital voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.4Integer32read-onlyobsolete
aprisaXETx5VDigHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 5V digital voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.5Integer32read-onlyobsolete
aprisaXETx5VDigLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.12
aprisaXETx5VDigLoAlarmStatus
OBJECT-TYPE
The status of the transmitter 5V digital voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx5VDigLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 5V digital voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx5VDigLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 5V digital voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx5VDigLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 5V digital voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.4Integer32read-onlyobsolete
aprisaXETx5VDigLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 5V digital voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.5Integer32read-onlyobsolete
aprisaXETx7VRfHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.13
aprisaXETx7VRfHiAlarmStatus
OBJECT-TYPE
The status of the transmitter 7V RF voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx7VRfHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 7V RF voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx7VRfHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 7V RF voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx7VRfHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 7V RF voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.4Integer32read-onlyobsolete
aprisaXETx7VRfHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 7V RF voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.5Integer32read-onlyobsolete
aprisaXETx7VRfLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.14
aprisaXETx7VRfLoAlarmStatus
OBJECT-TYPE
The status of the transmitter 7V RF voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx7VRfLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 7V RF voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx7VRfLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 7V RF voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx7VRfLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 7V RF voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.4Integer32read-onlyobsolete
aprisaXETx7VRfLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 7V RF voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.5Integer32read-onlyobsolete
aprisaXETx9VHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.15
aprisaXETx9VHiAlarmStatus
OBJECT-TYPE
The status of the transmitter 9V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx9VHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 9V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx9VHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 9V voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx9VHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 9V voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.4Integer32read-onlyobsolete
aprisaXETx9VHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 9V voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.5Integer32read-onlyobsolete
aprisaXETx9VLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.16
aprisaXETx9VLoAlarmStatus
OBJECT-TYPE
The status of the transmitter 9V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx9VLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 9V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx9VLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 9V voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx9VLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 9V voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.4Integer32read-onlyobsolete
aprisaXETx9VLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 9V voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.5Integer32read-onlyobsolete
aprisaXETx11VHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.17
aprisaXETx11VHiAlarmStatus
OBJECT-TYPE
The status of the transmitter 11V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx11VHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 11V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx11VHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 11V voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx11VHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 11V voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.4Integer32read-onlyobsolete
aprisaXETx11VHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 11V voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.5Integer32read-onlyobsolete
aprisaXETx11VLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.18
aprisaXETx11VLoAlarmStatus
OBJECT-TYPE
The status of the transmitter 11V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx11VLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 11V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx11VLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 11V voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx11VLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 11V voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.4Integer32read-onlyobsolete
aprisaXETx11VLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 11V voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.5Integer32read-onlyobsolete
aprisaXETx28VHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.19
aprisaXETx28VHiAlarmStatus
OBJECT-TYPE
The status of the transmitter 28V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx28VHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 28V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx28VHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 28V voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx28VHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 28V voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.4Integer32read-onlyobsolete
aprisaXETx28VHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 28V voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.5Integer32read-onlyobsolete
aprisaXETx28VLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.20
aprisaXETx28VLoAlarmStatus
OBJECT-TYPE
The status of the transmitter 28V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.1FourRFAlarmStatusread-onlyobsolete
aprisaXETx28VLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter 28V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.2FourRFAlarmSeverityread-onlyobsolete
aprisaXETx28VLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter 28V voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3FourRFAlarmEnabledread-onlyobsolete
aprisaXETx28VLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 28V voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.4Integer32read-onlyobsolete
aprisaXETx28VLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter 28V voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.5Integer32read-onlyobsolete
aprisaXETxSynthOutOfLockAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.21
aprisaXETxSynthOutOfLockAlarmStatus
OBJECT-TYPE
The status of the TX synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.21.1FourRFAlarmStatusread-onlycurrent
aprisaXETxSynthOutOfLockAlarmSeverity
OBJECT-TYPE
The severity of the TX synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.21.2FourRFAlarmSeverityread-onlycurrent
aprisaXETxSynthOutOfLockAlarmEnabled
OBJECT-TYPE
Indicates whether the TX synth out of lock alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.21.3FourRFAlarmEnabledread-onlycurrent
aprisaXEReturnLossHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.22
aprisaXEReturnLossHiAlarmStatus
OBJECT-TYPE
The status of the return loss out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.1FourRFAlarmStatusread-onlycurrent
aprisaXEReturnLossHiAlarmSeverity
OBJECT-TYPE
The severity of the return loss out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.2FourRFAlarmSeverityread-onlycurrent
aprisaXEReturnLossHiAlarmEnabled
OBJECT-TYPE
Indicates whether the return loss out of limits alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.3FourRFAlarmEnabledread-onlycurrent
aprisaXEReturnLossHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the return loss alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.4Integer32read-writecurrent
aprisaXEReturnLossHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the return loss alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.5Integer32read-writecurrent
aprisaXETxADCChZeroHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.23
aprisaXETxADCChZeroHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.1DisplayStringread-onlycurrent
aprisaXETxADCChZeroHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChZeroHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChZeroHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Zero voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChZeroHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Zero voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.5Integer32read-onlycurrent
aprisaXETxADCChZeroHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Zero voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.6Integer32read-onlycurrent
aprisaXETxADCChZeroLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.24
aprisaXETxADCChZeroLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.1DisplayStringread-onlycurrent
aprisaXETxADCChZeroLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChZeroLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChZeroLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Zero voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChZeroLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.5Integer32read-onlycurrent
aprisaXETxADCChZeroLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.6Integer32read-onlycurrent
aprisaXETxADCChOneHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.25
aprisaXETxADCChOneHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.1DisplayStringread-onlycurrent
aprisaXETxADCChOneHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChOneHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChOneHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch One voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChOneHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch One voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.5Integer32read-onlycurrent
aprisaXETxADCChOneHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch One voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.6Integer32read-onlycurrent
aprisaXETxADCChOneLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.26
aprisaXETxADCChOneLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.1DisplayStringread-onlycurrent
aprisaXETxADCChOneLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChOneLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChOneLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch One voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChOneLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch One voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.5Integer32read-onlycurrent
aprisaXETxADCChOneLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch One voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.6Integer32read-onlycurrent
aprisaXETxADCChTwoHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.27
aprisaXETxADCChTwoHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.1DisplayStringread-onlycurrent
aprisaXETxADCChTwoHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChTwoHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChTwoHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Two voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChTwoHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Two voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.5Integer32read-onlycurrent
aprisaXETxADCChTwoHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Two voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.6Integer32read-onlycurrent
aprisaXETxADCChTwoLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.28
aprisaXETxADCChTwoLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.1DisplayStringread-onlycurrent
aprisaXETxADCChTwoLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChTwoLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChTwoLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Two voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChTwoLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Two voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.5Integer32read-onlycurrent
aprisaXETxADCChTwoLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Two voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.6Integer32read-onlycurrent
aprisaXETxADCChThreeHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.29
aprisaXETxADCChThreeHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.1DisplayStringread-onlycurrent
aprisaXETxADCChThreeHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChThreeHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChThreeHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Three voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChThreeHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Three voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.5Integer32read-onlycurrent
aprisaXETxADCChThreeHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Three voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.6Integer32read-onlycurrent
aprisaXETxADCChThreeLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.30
aprisaXETxADCChThreeLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.1DisplayStringread-onlycurrent
aprisaXETxADCChThreeLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChThreeLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChThreeLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Three voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChThreeLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Three voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.5Integer32read-onlycurrent
aprisaXETxADCChThreeLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Three voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.6Integer32read-onlycurrent
aprisaXETxADCChFourHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.31
aprisaXETxADCChFourHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.1DisplayStringread-onlycurrent
aprisaXETxADCChFourHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChFourHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChFourHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Four voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChFourHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Four voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.5Integer32read-onlycurrent
aprisaXETxADCChFourHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Four voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.6Integer32read-onlycurrent
aprisaXETxADCChFourLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.32
aprisaXETxADCChFourLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.1DisplayStringread-onlycurrent
aprisaXETxADCChFourLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChFourLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChFourLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Four voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChFourLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Four voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.5Integer32read-onlycurrent
aprisaXETxADCChFourLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Four voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.6Integer32read-onlycurrent
aprisaXETxADCChFiveHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.33
aprisaXETxADCChFiveHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.1DisplayStringread-onlycurrent
aprisaXETxADCChFiveHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChFiveHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChFiveHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Five voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChFiveHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Five voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.5Integer32read-onlycurrent
aprisaXETxADCChFiveHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Five voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.6Integer32read-onlycurrent
aprisaXETxADCChFiveLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.34
aprisaXETxADCChFiveLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.1DisplayStringread-onlycurrent
aprisaXETxADCChFiveLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChFiveLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChFiveLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Five voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChFiveLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Five voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.5Integer32read-onlycurrent
aprisaXETxADCChFiveLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Five voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.6Integer32read-onlycurrent
aprisaXETxADCChSixHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.35
aprisaXETxADCChSixHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.1DisplayStringread-onlycurrent
aprisaXETxADCChSixHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChSixHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChSixHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Six voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChSixHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Six voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.5Integer32read-onlycurrent
aprisaXETxADCChSixHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Six voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.6Integer32read-onlycurrent
aprisaXETxADCChSixLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.36
aprisaXETxADCChSixLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.1DisplayStringread-onlycurrent
aprisaXETxADCChSixLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChSixLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChSixLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Six voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChSixLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Six voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.5Integer32read-onlycurrent
aprisaXETxADCChSixLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Six voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.6Integer32read-onlycurrent
aprisaXETxADCChSevenHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.37
aprisaXETxADCChSevenHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.1DisplayStringread-onlycurrent
aprisaXETxADCChSevenHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChSevenHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChSevenHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Seven voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChSevenHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Seven voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.5Integer32read-onlycurrent
aprisaXETxADCChSevenHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Seven voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.6Integer32read-onlycurrent
aprisaXETxADCChSevenLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.38
aprisaXETxADCChSevenLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.1DisplayStringread-onlycurrent
aprisaXETxADCChSevenLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChSevenLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChSevenLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Seven voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChSevenLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.5Integer32read-onlycurrent
aprisaXETxADCChSevenLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.6Integer32read-onlycurrent
aprisaXETxADCChEightHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.39
aprisaXETxADCChEightHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.1DisplayStringread-onlycurrent
aprisaXETxADCChEightHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChEightHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChEightHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Eight voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChEightHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Eight voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.5Integer32read-onlycurrent
aprisaXETxADCChEightHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Eight voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.6Integer32read-onlycurrent
aprisaXETxADCChEightLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.40
aprisaXETxADCChEightLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.1DisplayStringread-onlycurrent
aprisaXETxADCChEightLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChEightLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChEightLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Eight voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChEightLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.5Integer32read-onlycurrent
aprisaXETxADCChEightLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.6Integer32read-onlycurrent
aprisaXETxADCChNineHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.41
aprisaXETxADCChNineHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.1DisplayStringread-onlycurrent
aprisaXETxADCChNineHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChNineHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChNineHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Nine voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChNineHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Nine voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.5Integer32read-onlycurrent
aprisaXETxADCChNineHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Nine voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.6Integer32read-onlycurrent
aprisaXETxADCChNineLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.42
aprisaXETxADCChNineLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.1DisplayStringread-onlycurrent
aprisaXETxADCChNineLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChNineLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChNineLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Nine voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChNineLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.5Integer32read-onlycurrent
aprisaXETxADCChNineLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.6Integer32read-onlycurrent
aprisaXETxADCChTenHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.43
aprisaXETxADCChTenHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.1DisplayStringread-onlycurrent
aprisaXETxADCChTenHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChTenHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChTenHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Ten voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChTenHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Ten voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.5Integer32read-onlycurrent
aprisaXETxADCChTenHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Ten voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.6Integer32read-onlycurrent
aprisaXETxADCChTenLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.44
aprisaXETxADCChTenLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.1DisplayStringread-onlycurrent
aprisaXETxADCChTenLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChTenLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChTenLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Ten voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChTenLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.5Integer32read-onlycurrent
aprisaXETxADCChTenLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.6Integer32read-onlycurrent
aprisaXETxADCChElevenHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.45
aprisaXETxADCChElevenHiAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Eleven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.1DisplayStringread-onlycurrent
aprisaXETxADCChElevenHiAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Eleven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChElevenHiAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Eleven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChElevenHiAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Eleven voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChElevenHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Eleven voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.5Integer32read-onlycurrent
aprisaXETxADCChElevenHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the transmitter ADC Ch Eleven voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.6Integer32read-onlycurrent
aprisaXETxADCChElevenLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.1.46
aprisaXETxADCChElevenLoAlarmName
OBJECT-TYPE
The name of the transmitter ADC Ch Eleven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.1DisplayStringread-onlycurrent
aprisaXETxADCChElevenLoAlarmStatus
OBJECT-TYPE
The status of the transmitter ADC Ch Eleven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.2FourRFAlarmStatusread-onlycurrent
aprisaXETxADCChElevenLoAlarmSeverity
OBJECT-TYPE
The severity of the transmitter ADC Ch Eleven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.3FourRFAlarmSeverityread-onlycurrent
aprisaXETxADCChElevenLoAlarmEnabled
OBJECT-TYPE
Indicates whether the transmitter ADC Ch Eleven voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.4FourRFAlarmEnabledread-onlycurrent
aprisaXETxADCChElevenLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.5Integer32read-onlycurrent
aprisaXETxADCChElevenLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.6Integer32read-onlycurrent
aprisaXEReceiverAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6
aprisaXERxSynthOutOfLockAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.1
aprisaXERxSynthOutOfLockAlarmStatus
OBJECT-TYPE
The status of the Synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.1.1FourRFAlarmStatusread-onlycurrent
aprisaXERxSynthOutOfLockAlarmSeverity
OBJECT-TYPE
The severity of the Synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.1.2FourRFAlarmSeverityread-onlycurrent
aprisaXERxSynthOutOfLockAlarmEnabled
OBJECT-TYPE
Indicates whether the Synth out of lock alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.1.3FourRFAlarmEnabledread-onlycurrent
aprisaXERx12VAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.3
aprisaXERx12VAlarmStatus
OBJECT-TYPE
The status of the 12V supply alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.3.1FourRFAlarmStatusread-onlycurrent
aprisaXERx12VAlarmSeverity
OBJECT-TYPE
The severity of the 12V supply aprisaXERxVtuneLoAlarmalarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.3.2FourRFAlarmSeverityread-onlycurrent
aprisaXERx12VAlarmEnabled
OBJECT-TYPE
Indicates whether the 12V supply alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.3.3FourRFAlarmEnabledread-onlycurrent
aprisaXERx3V3HiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.4
aprisaXERx3V3HiAlarmStatus
OBJECT-TYPE
The status of the 3.3V supply high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.1FourRFAlarmStatusread-onlyobsolete
aprisaXERx3V3HiAlarmSeverity
OBJECT-TYPE
The severity of the 3.3V supply high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERx3V3HiAlarmEnabled
OBJECT-TYPE
Indicates whether the 3.3V supply high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERx3V3HiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the 3.3V supply high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.4Integer32read-onlyobsolete
aprisaXERx3V3HiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the 3.3V supply high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.5Integer32read-onlyobsolete
aprisaXERx3V3LoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.5
aprisaXERx3V3LoAlarmStatus
OBJECT-TYPE
The status of the 3.3V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.1FourRFAlarmStatusread-onlyobsolete
aprisaXERx3V3LoAlarmSeverity
OBJECT-TYPE
The severity of the 3.3V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERx3V3LoAlarmEnabled
OBJECT-TYPE
Indicates whether the 3.3V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERx3V3LoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the 3.3V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.4Integer32read-onlyobsolete
aprisaXERx3V3LoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the 3.3V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.5Integer32read-onlyobsolete
aprisaXERx5VHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.6
aprisaXERx5VHiAlarmStatus
OBJECT-TYPE
The status of the 5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.1FourRFAlarmStatusread-onlyobsolete
aprisaXERx5VHiAlarmSeverity
OBJECT-TYPE
The severity of the 5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERx5VHiAlarmEnabled
OBJECT-TYPE
Indicates whether the 5V supply High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERx5VHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the 5V supply High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.4Integer32read-onlyobsolete
aprisaXERx5VHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the 5V supply High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.5Integer32read-onlyobsolete
aprisaXERx5VLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.7
aprisaXERx5VLoAlarmStatus
OBJECT-TYPE
The status of the 5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.1FourRFAlarmStatusread-onlyobsolete
aprisaXERx5VLoAlarmSeverity
OBJECT-TYPE
The severity of the 5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERx5VLoAlarmEnabled
OBJECT-TYPE
Indicates whether the 5V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERx5VLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the 5V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.4Integer32read-onlyobsolete
aprisaXERx5VLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the 5V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.5Integer32read-onlyobsolete
aprisaXERx9VHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.8
aprisaXERx9VHiAlarmStatus
OBJECT-TYPE
The status of the 9V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.1FourRFAlarmStatusread-onlyobsolete
aprisaXERx9VHiAlarmSeverity
OBJECT-TYPE
The severity of the 9V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERx9VHiAlarmEnabled
OBJECT-TYPE
Indicates whether the 9V supply High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERx9VHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the 9V supply High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.4Integer32read-onlyobsolete
aprisaXERx9VHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the 9V supply High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.5Integer32read-onlyobsolete
aprisaXERx9VLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.9
aprisaXERx9VLoAlarmStatus
OBJECT-TYPE
The status of the 9V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.1FourRFAlarmStatusread-onlyobsolete
aprisaXERx9VLoAlarmSeverity
OBJECT-TYPE
The severity of the 9V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERx9VLoAlarmEnabled
OBJECT-TYPE
Indicates whether the 9V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERx9VLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the 9V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.4Integer32read-onlyobsolete
aprisaXERx9VLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the 9V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.5Integer32read-onlyobsolete
aprisaXERxNeg1V5HiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.10
aprisaXERxNeg1V5HiAlarmStatus
OBJECT-TYPE
The status of the Neg 1.5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.1FourRFAlarmStatusread-onlyobsolete
aprisaXERxNeg1V5HiAlarmSeverity
OBJECT-TYPE
The severity of the Neg 1.5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERxNeg1V5HiAlarmEnabled
OBJECT-TYPE
Indicates whether the Neg 1.5V supply High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERxNeg1V5HiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the Neg 1.5V supply High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.4Integer32read-onlyobsolete
aprisaXERxNeg1V5HiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the Neg 1.5V supply High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.5Integer32read-onlyobsolete
aprisaXERxNeg1V5LoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.11
aprisaXERxNeg1V5LoAlarmStatus
OBJECT-TYPE
The status of the Neg 1.5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.1FourRFAlarmStatusread-onlyobsolete
aprisaXERxNeg1V5LoAlarmSeverity
OBJECT-TYPE
The severity of the Neg 1.5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERxNeg1V5LoAlarmEnabled
OBJECT-TYPE
Indicates whether the Neg 1.5V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERxNeg1V5LoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the Neg 1.5V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.4Integer32read-onlyobsolete
aprisaXERxNeg1V5LoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the Neg 1.5V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.5Integer32read-onlyobsolete
aprisaXERxAgcHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.12
aprisaXERxAgcHiAlarmStatus
OBJECT-TYPE
The status of the AGC high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.1FourRFAlarmStatusread-onlyobsolete
aprisaXERxAgcHiAlarmSeverity
OBJECT-TYPE
The severity of the AGC high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERxAgcHiAlarmEnabled
OBJECT-TYPE
Indicates whether the AGC high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERxAgcHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the AGC high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.4Integer32read-onlyobsolete
aprisaXERxAgcHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the AGC high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.5Integer32read-onlyobsolete
aprisaXERxAgcLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.13
aprisaXERxAgcLoAlarmStatus
OBJECT-TYPE
The status of the AGC low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.1FourRFAlarmStatusread-onlyobsolete
aprisaXERxAgcLoAlarmSeverity
OBJECT-TYPE
The severity of the AGC low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERxAgcLoAlarmEnabled
OBJECT-TYPE
Indicates whether the AGC low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERxAgcLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the AGC low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.4Integer32read-onlyobsolete
aprisaXERxAgcLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the AGC low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.5Integer32read-onlyobsolete
aprisaXERxRssiHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.14
aprisaXERxRssiHiAlarmStatus
OBJECT-TYPE
The status of the RSSI High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.1FourRFAlarmStatusread-onlycurrent
aprisaXERxRssiHiAlarmSeverity
OBJECT-TYPE
The severity of the RSSI High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.2FourRFAlarmSeverityread-onlycurrent
aprisaXERxRssiHiAlarmEnabled
OBJECT-TYPE
Indicates whether the RSSI High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.3FourRFAlarmEnabledread-onlycurrent
aprisaXERxRssiHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the RSSI High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.4Integer32read-onlycurrent
aprisaXERxRssiHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the RSSI High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.5Integer32read-onlycurrent
aprisaXERxRssiLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.15
aprisaXERxRssiLoAlarmStatus
OBJECT-TYPE
The status of the RSSI low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.1FourRFAlarmStatusread-onlycurrent
aprisaXERxRssiLoAlarmSeverity
OBJECT-TYPE
The severity of the RSSI low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.2FourRFAlarmSeverityread-onlycurrent
aprisaXERxRssiLoAlarmEnabled
OBJECT-TYPE
Indicates whether the RSSI low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.3FourRFAlarmEnabledread-onlycurrent
aprisaXERxRssiLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the RSSI low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.4Integer32read-onlycurrent
aprisaXERxRssiLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the RSSI low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.5Integer32read-onlycurrent
aprisaXERxVtuneHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.16
aprisaXERxVtuneHiAlarmStatus
OBJECT-TYPE
The status of the Vtune High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.1FourRFAlarmStatusread-onlyobsolete
aprisaXERxVtuneHiAlarmSeverity
OBJECT-TYPE
The severity of the Vtune High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERxVtuneHiAlarmEnabled
OBJECT-TYPE
Indicates whether the Vtune High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERxVtuneHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the Vtune High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.4Integer32read-onlyobsolete
aprisaXERxVtuneHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the Vtune High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.5Integer32read-onlyobsolete
aprisaXERxVtuneLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.17
aprisaXERxVtuneLoAlarmStatus
OBJECT-TYPE
The status of the Vtune low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.1FourRFAlarmStatusread-onlyobsolete
aprisaXERxVtuneLoAlarmSeverity
OBJECT-TYPE
The severity of the Vtune low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.2FourRFAlarmSeverityread-onlyobsolete
aprisaXERxVtuneLoAlarmEnabled
OBJECT-TYPE
Indicates whether the Vtune low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.3FourRFAlarmEnabledread-onlyobsolete
aprisaXERxVtuneLoAlarmThreshold
OBJECT-TYPE
Indicates the level at which the Vtune low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.4Integer32read-onlyobsolete
aprisaXERxVtuneLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the Vtune low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.5Integer32read-onlyobsolete
aprisaXERxEEAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.18
aprisaXERxEEAlarmStatus
OBJECT-TYPE
The status of the EEPROM alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.18.1FourRFAlarmStatusread-onlycurrent
aprisaXERxEEAlarmSeverity
OBJECT-TYPE
The severity of the EEPROM alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.18.2FourRFAlarmSeverityread-onlycurrent
aprisaXERxEEAlarmEnabled
OBJECT-TYPE
Indicates whether the EEPROM alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.18.3FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChZeroHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.19
aprisaXERxADCChZeroHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.1DisplayStringread-onlycurrent
aprisaXERxADCChZeroHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChZeroHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChZeroHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Zero voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChZeroHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Zero voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.5Integer32read-onlycurrent
aprisaXERxADCChZeroHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Zero voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.6Integer32read-onlycurrent
aprisaXERxADCChZeroLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.20
aprisaXERxADCChZeroLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.1DisplayStringread-onlycurrent
aprisaXERxADCChZeroLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChZeroLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChZeroLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Zero voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChZeroLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Zero voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.5Integer32read-onlycurrent
aprisaXERxADCChZeroLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Zero voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.6Integer32read-onlycurrent
aprisaXERxADCChOneHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.21
aprisaXERxADCChOneHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.1DisplayStringread-onlycurrent
aprisaXERxADCChOneHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChOneHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChOneHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch One voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChOneHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch One voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.5Integer32read-onlycurrent
aprisaXERxADCChOneHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch One voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.6Integer32read-onlycurrent
aprisaXERxADCChOneLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.22
aprisaXERxADCChOneLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.1DisplayStringread-onlycurrent
aprisaXERxADCChOneLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChOneLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChOneLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch One voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChOneLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch One voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.5Integer32read-onlycurrent
aprisaXERxADCChOneLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch One voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.6Integer32read-onlycurrent
aprisaXERxADCChTwoHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.23
aprisaXERxADCChTwoHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.1DisplayStringread-onlycurrent
aprisaXERxADCChTwoHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChTwoHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChTwoHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Two voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChTwoHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Two voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.5Integer32read-onlycurrent
aprisaXERxADCChTwoHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Two voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.6Integer32read-onlycurrent
aprisaXERxADCChTwoLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.24
aprisaXERxADCChTwoLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.1DisplayStringread-onlycurrent
aprisaXERxADCChTwoLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChTwoLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChTwoLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Two voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChTwoLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Two voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.5Integer32read-onlycurrent
aprisaXERxADCChTwoLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Two voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.6Integer32read-onlycurrent
aprisaXERxADCChThreeHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.25
aprisaXERxADCChThreeHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.1DisplayStringread-onlycurrent
aprisaXERxADCChThreeHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChThreeHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChThreeHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Three voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChThreeHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Three voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.5Integer32read-onlycurrent
aprisaXERxADCChThreeHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Three voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.6Integer32read-onlycurrent
aprisaXERxADCChThreeLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.26
aprisaXERxADCChThreeLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.1DisplayStringread-onlycurrent
aprisaXERxADCChThreeLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChThreeLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChThreeLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Three voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChThreeLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Three voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.5Integer32read-onlycurrent
aprisaXERxADCChThreeLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Three voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.6Integer32read-onlycurrent
aprisaXERxADCChFourHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.27
aprisaXERxADCChFourHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.1DisplayStringread-onlycurrent
aprisaXERxADCChFourHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChFourHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChFourHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Four voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChFourHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Four voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.5Integer32read-onlycurrent
aprisaXERxADCChFourHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Four voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.6Integer32read-onlycurrent
aprisaXERxADCChFourLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.28
aprisaXERxADCChFourLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.1DisplayStringread-onlycurrent
aprisaXERxADCChFourLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChFourLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChFourLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Four voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChFourLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Four voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.5Integer32read-onlycurrent
aprisaXERxADCChFourLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Four voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.6Integer32read-onlycurrent
aprisaXERxADCChFiveHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.29
aprisaXERxADCChFiveHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.1DisplayStringread-onlycurrent
aprisaXERxADCChFiveHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChFiveHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChFiveHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Five voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChFiveHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Five voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.5Integer32read-onlycurrent
aprisaXERxADCChFiveHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Five voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.6Integer32read-onlycurrent
aprisaXERxADCChFiveLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.30
aprisaXERxADCChFiveLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.1DisplayStringread-onlycurrent
aprisaXERxADCChFiveLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChFiveLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChFiveLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Five voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChFiveLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Five voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.5Integer32read-onlycurrent
aprisaXERxADCChFiveLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Five voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.6Integer32read-onlycurrent
aprisaXERxADCChSixHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.31
aprisaXERxADCChSixHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.1DisplayStringread-onlycurrent
aprisaXERxADCChSixHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChSixHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChSixHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Six voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChSixHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Six voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.5Integer32read-onlycurrent
aprisaXERxADCChSixHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Six voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.6Integer32read-onlycurrent
aprisaXERxADCChSixLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.32
aprisaXERxADCChSixLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.1DisplayStringread-onlycurrent
aprisaXERxADCChSixLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChSixLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChSixLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Six voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChSixLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Six voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.5Integer32read-onlycurrent
aprisaXERxADCChSixLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Six voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.6Integer32read-onlycurrent
aprisaXERxADCChSevenHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.33
aprisaXERxADCChSevenHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.1DisplayStringread-onlycurrent
aprisaXERxADCChSevenHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChSevenHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChSevenHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Seven voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChSevenHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Seven voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.5Integer32read-onlycurrent
aprisaXERxADCChSevenHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Seven voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.6Integer32read-onlycurrent
aprisaXERxADCChSevenLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.34
aprisaXERxADCChSevenLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.1DisplayStringread-onlycurrent
aprisaXERxADCChSevenLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChSevenLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChSevenLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Seven voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChSevenLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Seven voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.5Integer32read-onlycurrent
aprisaXERxADCChSevenLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Seven voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.6Integer32read-onlycurrent
aprisaXERxADCChEightHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.35
aprisaXERxADCChEightHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.1DisplayStringread-onlycurrent
aprisaXERxADCChEightHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChEightHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChEightHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Eight voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChEightHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Eight voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.5Integer32read-onlycurrent
aprisaXERxADCChEightHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Eight voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.6Integer32read-onlycurrent
aprisaXERxADCChEightLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.36
aprisaXERxADCChEightLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.1DisplayStringread-onlycurrent
aprisaXERxADCChEightLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChEightLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChEightLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Eight voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChEightLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Eight voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.5Integer32read-onlycurrent
aprisaXERxADCChEightLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Eight voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.6Integer32read-onlycurrent
aprisaXERxADCChNineHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.37
aprisaXERxADCChNineHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.1DisplayStringread-onlycurrent
aprisaXERxADCChNineHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChNineHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChNineHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Nine voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChNineHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Nine voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.5Integer32read-onlycurrent
aprisaXERxADCChNineHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Nine voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.6Integer32read-onlycurrent
aprisaXERxADCChNineLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.38
aprisaXERxADCChNineLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.1DisplayStringread-onlycurrent
aprisaXERxADCChNineLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChNineLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChNineLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Nine voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChNineLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Nine voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.5Integer32read-onlycurrent
aprisaXERxADCChNineLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Nine voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.6Integer32read-onlycurrent
aprisaXERxADCChTenHiAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.39
aprisaXERxADCChTenHiAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.1DisplayStringread-onlycurrent
aprisaXERxADCChTenHiAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChTenHiAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChTenHiAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Ten voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChTenHiAlarmThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Ten voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.5Integer32read-onlycurrent
aprisaXERxADCChTenHiAlarmClearThreshold
OBJECT-TYPE
Indicates the level at which the receiver ADC Ch Ten voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.6Integer32read-onlycurrent
aprisaXERxADCChTenLoAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.6.40
aprisaXERxADCChTenLoAlarmName
OBJECT-TYPE
The name of the receiver ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.1DisplayStringread-onlycurrent
aprisaXERxADCChTenLoAlarmStatus
OBJECT-TYPE
The status of the receiver ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.2FourRFAlarmStatusread-onlycurrent
aprisaXERxADCChTenLoAlarmSeverity
OBJECT-TYPE
The severity of the receiver ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.3FourRFAlarmSeverityread-onlycurrent
aprisaXERxADCChTenLoAlarmEnabled
OBJECT-TYPE
Indicates whether the receiver ADC Ch Ten voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.4FourRFAlarmEnabledread-onlycurrent
aprisaXERxADCChTenLoAlarmThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Ten voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.5Integer32read-onlycurrent
aprisaXERxADCChTenLoAlarmClearThreshold
OBJECT-TYPE
Indicates the level at wLoch the receiver ADC Ch Ten voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.6Integer32read-onlycurrent
aprisaXEModemAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.10
aprisaXEModemSyncAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.86.10.1
aprisaXEModemSyncAlarmStatus
OBJECT-TYPE
The status of the loss of modem sync alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.10.1.1FourRFAlarmStatusread-onlycurrent
aprisaXEModemSyncAlarmSeverity
OBJECT-TYPE
The severity of the loss of modem sync alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.10.1.2FourRFAlarmSeverityread-onlycurrent
aprisaXEModemSyncAlarmEnabled
OBJECT-TYPE
Indicates whether the loss of modem sync alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.10.1.3FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetBoardTable
OBJECT-TYPE
Table of Quad E1 card specific configuration details.
1.3.6.1.4.1.14817.7.3.1.2.87not-accessiblecurrent
aprisaXEQuadJetBoardEntry
OBJECT-TYPE
Quad E1 configuration details.
1.3.6.1.4.1.14817.7.3.1.2.87.1not-accessiblecurrent
aprisaXEQuadJetBoardTableIndex
OBJECT-TYPE
Quad E1 board indexed by slot.
1.3.6.1.4.1.14817.7.3.1.2.87.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEQuadJetPortTable
OBJECT-TYPE
Table based on slot and port of QuadJet cards alarms.
1.3.6.1.4.1.14817.7.3.1.2.88not-accessiblecurrent
aprisaXEQuadJetPortEntry
OBJECT-TYPE
Quad E1 port alarms.
1.3.6.1.4.1.14817.7.3.1.2.88.1not-accessiblecurrent
aprisaXEQuadJetPortTableSlot
OBJECT-TYPE
Port table index based on slot number.
1.3.6.1.4.1.14817.7.3.1.2.88.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEQuadJetPortTablePort
OBJECT-TYPE
Port table index based on port number.
1.3.6.1.4.1.14817.7.3.1.2.88.1.2AprisaXEPortNumberread-onlycurrent
aprisaXEQuadJetLOFAlarmStatus
OBJECT-TYPE
Red alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.3FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetLOFAlarmSeverity
OBJECT-TYPE
Red alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.4FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetLOFAlarmEnabled
OBJECT-TYPE
Red alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.5FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetAISAlarmStatus
OBJECT-TYPE
AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.6FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetAISAlarmSeverity
OBJECT-TYPE
AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.7FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetAISAlarmEnabled
OBJECT-TYPE
AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.8FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetRAIAlarmStatus
OBJECT-TYPE
RAI alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.9FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetRAIAlarmSeverity
OBJECT-TYPE
RAI alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.10FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetRAIAlarmEnabled
OBJECT-TYPE
RAI alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.11FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetRMAIAlarmStatus
OBJECT-TYPE
RMAI alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.12FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetRMAIAlarmSeverity
OBJECT-TYPE
RMAI alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.13FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetRMAIAlarmEnabled
OBJECT-TYPE
RMAI alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.14FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetTS16AISAlarmStatus
OBJECT-TYPE
TS16 AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.15FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetTS16AISAlarmSeverity
OBJECT-TYPE
TS16 AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.16FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetTS16AISAlarmEnabled
OBJECT-TYPE
TS16 AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.17FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetTS16LOSAlarmStatus
OBJECT-TYPE
TS16 LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.18FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetTS16LOSAlarmSeverity
OBJECT-TYPE
TS16 LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.19FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetTS16LOSAlarmEnabled
OBJECT-TYPE
TS16 LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.20FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetLOSAlarmStatus
OBJECT-TYPE
LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.21FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetLOSAlarmSeverity
OBJECT-TYPE
LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.22FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetLOSAlarmEnabled
OBJECT-TYPE
LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.23FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetCRC4AlarmStatus
OBJECT-TYPE
CRC4 alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.24FourRFAlarmStatusread-onlycurrent
aprisaXEQuadJetCRC4AlarmSeverity
OBJECT-TYPE
CRC4 alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.25FourRFAlarmSeverityread-onlycurrent
aprisaXEQuadJetCRC4AlarmEnabled
OBJECT-TYPE
CRC4 alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.26FourRFAlarmEnabledread-onlycurrent
aprisaXEQuadJetCRC4AlarmThreshold
OBJECT-TYPE
CRC4 Threshold value for counter to alarm at.
1.3.6.1.4.1.14817.7.3.1.2.88.1.27Integer32read-onlycurrent
aprisaXEQuadJetCRC4AlarmClearThreshold
OBJECT-TYPE
CRC4 Threshold at which alarm clears.
1.3.6.1.4.1.14817.7.3.1.2.88.1.28Integer32read-onlycurrent
aprisaXEQuadJetIFConfigTable
OBJECT-TYPE
Switch data table which describes the allocation of user data on to the TDM busses.
1.3.6.1.4.1.14817.7.3.1.2.90not-accessiblecurrent
aprisaXEQuadJetIFConfigEntry
OBJECT-TYPE
Quad JET config data.
1.3.6.1.4.1.14817.7.3.1.2.90.1not-accessiblecurrent
aprisaXEQuadJetIFConfigSlotIndex
OBJECT-TYPE
Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.90.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEQuadJetIFConfigPortIndex
OBJECT-TYPE
Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.90.1.2AprisaXEPortNumberread-onlycurrent
aprisaXEQuadJetTrafficType
OBJECT-TYPE
Controls the traffic type on a Quad JET port.
1.3.6.1.4.1.14817.7.3.1.2.90.1.3AprisaXEQuadJetTrafficTyperead-writecurrent
aprisaXEQuadJetLoopback
OBJECT-TYPE
Controls the traffic loopback on a Quad JET port.
1.3.6.1.4.1.14817.7.3.1.2.90.1.4FourRFLoopbackread-writeobsolete
aprisaXEQuadJetLineEncoding
OBJECT-TYPE
Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
1.3.6.1.4.1.14817.7.3.1.2.90.1.5AprisaXEQuadJetLineEncodingread-writecurrent
aprisaXEQuadJetPcmMode
OBJECT-TYPE
Controls the PCM mode, PCM31 or PCM30C.
1.3.6.1.4.1.14817.7.3.1.2.90.1.6AprisaXEPcmModeread-writecurrent
aprisaXEQuadJetClockSource
OBJECT-TYPE
Controls whether the port drives the clock soure or not.
1.3.6.1.4.1.14817.7.3.1.2.90.1.7FourRFNetworkClockSelectread-writecurrent
aprisaXEQuadJetLineRadioLoopback
OBJECT-TYPE
This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
1.3.6.1.4.1.14817.7.3.1.2.90.1.8AprisaXEQuadJetLoopbacksread-writecurrent
aprisaXEQuadJetTxWaveFormShaper
OBJECT-TYPE
This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
1.3.6.1.4.1.14817.7.3.1.2.90.1.9AprisaXEQuadJetWaveFormShapersread-writecurrent
aprisaXEQuadJetMultiframeEnable
OBJECT-TYPE
Indicates whether support is enabled for transport of T1 SF and ESF multiframe sync for a port.
1.3.6.1.4.1.14817.7.3.1.2.90.1.10AprisaXEQuadJetMultiframeEnableread-writecurrent
aprisaXEQuadJetIFConnectionTable
OBJECT-TYPE
Interface connection table which holds all the cross connect information for the E1 card.
1.3.6.1.4.1.14817.7.3.1.2.91not-accessiblecurrent
aprisaXEQuadJetIFConnectionTableEntry
OBJECT-TYPE
Quad JET cross connection data.
1.3.6.1.4.1.14817.7.3.1.2.91.1not-accessiblecurrent
aprisaXEQuadJetIFConnectionID
OBJECT-TYPE
Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.91.1.1AprisaXEConnectionIDread-onlycurrent
aprisaXEQuadJetIFConnectionAggregateID
OBJECT-TYPE
Aggregate ID, 0 if an unframed connection.
1.3.6.1.4.1.14817.7.3.1.2.91.1.2AprisaXEConnectionIDread-onlycurrent
aprisaXEQuadJetIFConnectionSlot
OBJECT-TYPE
Slot number that this card is in.
1.3.6.1.4.1.14817.7.3.1.2.91.1.3AprisaXESlotNumberread-onlycurrent
aprisaXEQuadJetIFConnectionE1Port
OBJECT-TYPE
Port number associated with this connection.
1.3.6.1.4.1.14817.7.3.1.2.91.1.4AprisaXEPortNumberread-onlycurrent
aprisaXEQuadJetIFConnectionType
OBJECT-TYPE
Indicates whether the connection is for data or CAS signalling.
1.3.6.1.4.1.14817.7.3.1.2.91.1.5AprisaXEQuadJetConnectionTyperead-onlycurrent
aprisaXEQuadJetIFConnectionControl
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.93
aprisaXEQuadJetIFControlConnectionID
OBJECT-TYPE
Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.93.1AprisaXEConnectionIDread-writecurrent
aprisaXEQuadJetIFControlAggregateID
OBJECT-TYPE
Aggregate Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.93.2AprisaXEConnectionIDread-writecurrent
aprisaXEQuadJetIFConnectionControlSlot
OBJECT-TYPE
Slot number that this card is in.
1.3.6.1.4.1.14817.7.3.1.2.93.3AprisaXESlotNumberread-writecurrent
aprisaXEQuadJetIFConnectionControlE1Port
OBJECT-TYPE
Port number associated with this connection.
1.3.6.1.4.1.14817.7.3.1.2.93.4AprisaXEPortNumberread-writecurrent
aprisaXEQuadJetIFConnectionControlType
OBJECT-TYPE
Indicates whether the connection is for data or CAS signalling.
1.3.6.1.4.1.14817.7.3.1.2.93.5AprisaXEQuadJetConnectionTyperead-writecurrent
aprisaXEQuadJetIFConnectionControlCommand
OBJECT-TYPE
Command to send to act upon the rows in the QuedJet Interface Connection table.
1.3.6.1.4.1.14817.7.3.1.2.93.6INTEGER {noCommand(0), addCommand(1), deleteCommand(2)}read-writecurrent
aprisaXEEthernetConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.95
aprisaXEEthernetBandwidth
OBJECT-TYPE
This controls the bandwidth allocated to ethernet in kbps, the minimum block is 8kbps, values will be rounded up to the nearest 8kbps.
1.3.6.1.4.1.14817.7.3.1.2.95.1Unsigned32read-writecurrent
aprisaXEEthernetManagementBandwidth
OBJECT-TYPE
This controls the bandwidth available to management traffic, a minimum of 8kbps is required. Values will be rounded up to the nearest 8kbps.
1.3.6.1.4.1.14817.7.3.1.2.95.2Unsigned32read-writecurrent
aprisaXEEthernetCustomerConnectionID
OBJECT-TYPE
Backplane connection ID for Customer bandwidth.
1.3.6.1.4.1.14817.7.3.1.2.95.3AprisaXEConnectionIDread-writecurrent
aprisaXEEthernetPBCConnectionID
OBJECT-TYPE
Backplane connection ID for Private Back Channel management bandwidth.
1.3.6.1.4.1.14817.7.3.1.2.95.4AprisaXEConnectionIDread-writecurrent
aprisaXEEthernetPortTable
OBJECT-TYPE
Table used to control and monitor basic ethernet features on the 4-port hub.
1.3.6.1.4.1.14817.7.3.1.2.96not-accessiblecurrent
aprisaXEEthernetPortEntry
OBJECT-TYPE
Ethernet port status and configuration.
1.3.6.1.4.1.14817.7.3.1.2.96.1not-accessiblecurrent
aprisaXEEthernetPortIndex
OBJECT-TYPE
The port index, there are four ports on the hub.
1.3.6.1.4.1.14817.7.3.1.2.96.1.1INTEGER (1..4)read-onlycurrent
aprisaXEEthernetAutonegotiationStatus
OBJECT-TYPE
The status of the port auto-negotiation.
1.3.6.1.4.1.14817.7.3.1.2.96.1.2INTEGER {autoNegotiationNotComplete(0), autoNegotiationComplete(1)}read-onlycurrent
aprisaXEEthernetRemoteFaultStatus
OBJECT-TYPE
The status of the port remote fault detection.
1.3.6.1.4.1.14817.7.3.1.2.96.1.3INTEGER {remoteFaultNotDetected(0), remoteFaultDetected(1)}read-onlycurrent
aprisaXEEthernetLinkStatus
OBJECT-TYPE
The status of the port link.
1.3.6.1.4.1.14817.7.3.1.2.96.1.4INTEGER {down(0), up(1)}read-onlycurrent
aprisaXEEthernetJabberStatus
OBJECT-TYPE
Has jabber been detected on the port?.
1.3.6.1.4.1.14817.7.3.1.2.96.1.5INTEGER {jabberNotDetected(0), jabberDetected(1)}read-onlycurrent
aprisaXEEthernetSpeed
OBJECT-TYPE
The current port speed, 10 or 100 Mbps.
1.3.6.1.4.1.14817.7.3.1.2.96.1.6INTEGER {mbps10(0), mbps100(1)}read-onlycurrent
aprisaXEEthernetDuplexMode
OBJECT-TYPE
The current port duplex mode.
1.3.6.1.4.1.14817.7.3.1.2.96.1.7INTEGER {halfDuplex(0), fullDuplex(1)}read-onlycurrent
aprisaXEEthernetTable
OBJECT-TYPE
Table used to display and configure Ethernet settings.
1.3.6.1.4.1.14817.7.3.1.2.97not-accessiblecurrent
aprisaXEEthernetTableEntry
OBJECT-TYPE
Individual Ethernet port settings.
1.3.6.1.4.1.14817.7.3.1.2.97.1not-accessiblecurrent
aprisaXEEthernetPortNum
OBJECT-TYPE
The port number, there are four ports on the hub.
1.3.6.1.4.1.14817.7.3.1.2.97.1.1AprisaXEEthernetPortNumberread-onlycurrent
aprisaXEEthernetGroup
OBJECT-TYPE
The Ethernet Group of which this port is a member.
1.3.6.1.4.1.14817.7.3.1.2.97.1.2AprisaXEEthernetGroupread-writecurrent
aprisaXEEthernetIngressRate
OBJECT-TYPE
The ingress frame rate limit for this port.
1.3.6.1.4.1.14817.7.3.1.2.97.1.3AprisaXEEthernetFrameRateread-writecurrent
aprisaXEEthernetPortPriority
OBJECT-TYPE
Indicates the bandwidth allocated to this port.
1.3.6.1.4.1.14817.7.3.1.2.97.1.4AprisaXEEthernetPortPriorityread-writecurrent
aprisaXEEthernetVlanQosSettings
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.98
aprisaXEEthernetGrouping
OBJECT-TYPE
Indicates whether Ethernet grouping (VLANs) is enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.98.1AprisaXEEthernetGroupingread-writecurrent
aprisaXEEthernetManagementGroup
OBJECT-TYPE
The Ethernet Group for management.
1.3.6.1.4.1.14817.7.3.1.2.98.2AprisaXEEthernetGroupread-onlycurrent
aprisaXEEthernetPrioQueueScheduling
OBJECT-TYPE
Indicates Ethernet priority queue scheduling scheme (either strict or weighted).
1.3.6.1.4.1.14817.7.3.1.2.98.3AprisaXEEthernetPrioQueueSchedulingread-writecurrent
aprisaXEEthernetPrioQueueMapping
OBJECT-TYPE
Indicates the IEEE 802.1 Ethernet priority queue mapping scheme (either standard or cisco).
1.3.6.1.4.1.14817.7.3.1.2.98.4AprisaXEEthernetPrioQueueMappingread-writecurrent
aprisaXEDefaultEthernetGrouping
OBJECT-TYPE
Indicates when Ethernet Grouping settings must be reset to default values.
1.3.6.1.4.1.14817.7.3.1.2.98.5AprisaXEDefaultActionread-writecurrent
aprisaXEDefaultEthernetQos
OBJECT-TYPE
Indicates when Ethernet Grouping settings must be reset to default values.
1.3.6.1.4.1.14817.7.3.1.2.98.6AprisaXEDefaultActionread-writecurrent
aprisaXEInterfaceTable
OBJECT-TYPE
Table used to monitor the current interface status.
1.3.6.1.4.1.14817.7.3.1.2.100not-accessiblecurrent
aprisaXEInterfaceTableEntry
OBJECT-TYPE
Interface bandwidth and status.
1.3.6.1.4.1.14817.7.3.1.2.100.1not-accessiblecurrent
aprisaXEInterfaceIndex
OBJECT-TYPE
The slot containing the interface card, slots 0 to 8 (AUX or A-H) inclusive may contain interface cards.
1.3.6.1.4.1.14817.7.3.1.2.100.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEInterfaceType
OBJECT-TYPE
Indicates the type of interface card.
1.3.6.1.4.1.14817.7.3.1.2.100.1.2AprisaXECardTyperead-onlycurrent
aprisaXEInterfaceAlarmStatus
OBJECT-TYPE
Indicates the current alarm status for the interface.
1.3.6.1.4.1.14817.7.3.1.2.100.1.3FourRFAlarmStatusread-onlycurrent
aprisaXEInterfacePort1Bandwidth
OBJECT-TYPE
Indicates the bandwidth allocated to port 1.
1.3.6.1.4.1.14817.7.3.1.2.100.1.4Unsigned32read-onlycurrent
aprisaXEInterfacePort2Bandwidth
OBJECT-TYPE
Indicates the bandwidth allocated to port 2.
1.3.6.1.4.1.14817.7.3.1.2.100.1.5Unsigned32read-onlycurrent
aprisaXEInterfacePort3Bandwidth
OBJECT-TYPE
Indicates the bandwidth allocated to port 3.
1.3.6.1.4.1.14817.7.3.1.2.100.1.6Unsigned32read-onlycurrent
aprisaXEInterfacePort4Bandwidth
OBJECT-TYPE
Indicates the bandwidth allocated to port 4.
1.3.6.1.4.1.14817.7.3.1.2.100.1.7Unsigned32read-onlycurrent
aprisaXE4WirePortControlTable
OBJECT-TYPE
Status and Control table for 4Wire.
1.3.6.1.4.1.14817.7.3.1.2.110not-accessiblecurrent
aprisaXE4WirePortControlTableEntry
OBJECT-TYPE
Entries for 4wire table.
1.3.6.1.4.1.14817.7.3.1.2.110.1not-accessiblecurrent
aprisaXE4WireConnectionID
OBJECT-TYPE
Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.110.1.1AprisaXEConnectionIDread-writecurrent
aprisaXE4WireSlotIndex
OBJECT-TYPE
Slot index for 4wire Status Control table.
1.3.6.1.4.1.14817.7.3.1.2.110.1.2AprisaXESlotNumberread-onlycurrent
aprisaXE4WirePortIndex
OBJECT-TYPE
Channel index for 4 Wire Control Status table.
1.3.6.1.4.1.14817.7.3.1.2.110.1.3AprisaXEPortNumberread-onlycurrent
aprisaXE4WireLoopback
OBJECT-TYPE
Loopback control on or off for channels.
1.3.6.1.4.1.14817.7.3.1.2.110.1.4FourRFLoopbackread-writecurrent
aprisaXE4WireAdpcmCompression
OBJECT-TYPE
ADPCM compression 16, 24, 32, 64 kbps or none.
1.3.6.1.4.1.14817.7.3.1.2.110.1.5AprisaXEAdpcmCompressionread-writecurrent
aprisaXE4WireRxGain
OBJECT-TYPE
Rx gain +4 dB to -14 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.110.1.6AprisaXE4WRxGainread-writeobsolete
aprisaXE4WireTxGain
OBJECT-TYPE
Tx gain +14 dB to -4 dB in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.110.1.7AprisaXE4WTxGainread-writeobsolete
aprisaXE4WireEInvert
OBJECT-TYPE
Controls E on each channel for NORMAL or INVERT polarity.
1.3.6.1.4.1.14817.7.3.1.2.110.1.8AprisaXESignalStateread-writecurrent
aprisaXE4WireMInvert
OBJECT-TYPE
Controls M on each channel for NORMAL or INVERT polarity.
1.3.6.1.4.1.14817.7.3.1.2.110.1.9AprisaXESignalStateread-writecurrent
aprisaXE4WireSignalling
OBJECT-TYPE
Enables or disables E&M signalling for the port.
1.3.6.1.4.1.14817.7.3.1.2.110.1.10INTEGER {signallingOff(0), signallingOn(1)}read-writecurrent
aprisaXE4WireSignallingConnectionID
OBJECT-TYPE
Associated signalling cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.110.1.11AprisaXEConnectionIDread-writecurrent
aprisaXE4WireInputLevel
OBJECT-TYPE
Input Level -14.0 dBr to +4.0 dBr in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.110.1.12AprisaXE4WInputLevelread-writecurrent
aprisaXE4WireOutputLevel
OBJECT-TYPE
Output Level -14.0 dBr to +4.0 dBr in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.110.1.13AprisaXE4WOutputLevelread-writecurrent
aprisaXE4WireStatusControlTable
OBJECT-TYPE
Overall card control and status.
1.3.6.1.4.1.14817.7.3.1.2.121not-accessiblecurrent
aprisaXE4WireStatusControlTableEntry
OBJECT-TYPE
Status control entries.
1.3.6.1.4.1.14817.7.3.1.2.121.1not-accessiblecurrent
aprisaXE4WireStatusControlSlotIndex
OBJECT-TYPE
Index for table.
1.3.6.1.4.1.14817.7.3.1.2.121.1.1AprisaXESlotNumberread-onlycurrent
aprisaXE4WirePcmLaw
OBJECT-TYPE
Sets A-law or u-law.
1.3.6.1.4.1.14817.7.3.1.2.121.1.2AprisaXEPcmLawread-writecurrent
aprisaXEFXOPortControlTable
OBJECT-TYPE
Port Control table for FXO.
1.3.6.1.4.1.14817.7.3.1.2.130not-accessiblecurrent
aprisaXEFXOPortControlTableEntry
OBJECT-TYPE
Entries for FXO table.
1.3.6.1.4.1.14817.7.3.1.2.130.1not-accessiblecurrent
aprisaXEFXOPortControlSlotIndex
OBJECT-TYPE
Slot index for FXO Control table.
1.3.6.1.4.1.14817.7.3.1.2.130.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEFXOPortIndex
OBJECT-TYPE
Port index for FXO Control table.
1.3.6.1.4.1.14817.7.3.1.2.130.1.2AprisaXEPortNumberread-onlycurrent
aprisaXEFXOLoopback
OBJECT-TYPE
Loopback control on or off for ports.
1.3.6.1.4.1.14817.7.3.1.2.130.1.3FourRFLoopbackread-writecurrent
aprisaXEFXOAdpcmCompression
OBJECT-TYPE
ADPCM compression 16, 24, 32, 64 kbps or none.
1.3.6.1.4.1.14817.7.3.1.2.130.1.4AprisaXEAdpcmCompressionread-writecurrent
aprisaXEFXORxGain
OBJECT-TYPE
Rx gain -10 dB to 10 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.130.1.5INTEGER {fxopos100(0), fxopos95(1), fxopos90(2), fxopos85(3), fxopos80(4), fxopos75(5), fxopos70(6), fxopos65(7), fxopos60(8), fxopos55(9), fxopos50(10), fxopos45(11), fxopos40(12), fxopos35(13), fxopos30(14), fxopos25(15), fxopos20(16), fxopos15(17), fxopos10(18), fxopos05(19), fxopos0(20), fxoneg05(21), fxoneg10(22), fxoneg15(23), fxoneg20(24), fxoneg25(25), fxoneg30(26), fxoneg35(27), fxoneg40(28), fxoneg45(29), fxoneg50(30), fxoneg55(31), fxoneg60(32), fxoneg65(33), fxoneg70(34), fxoneg75(35), fxoneg80(36), fxoneg85(37), fxoneg90(38), fxoneg95(39), fxoneg100(40)}read-writeobsolete
aprisaXEFXOTxGain
OBJECT-TYPE
Tx gain -10 dB to 10 dB in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.130.1.6INTEGER {fxopos100(0), fxopos95(1), fxopos90(2), fxopos85(3), fxopos80(4), fxopos75(5), fxopos70(6), fxopos65(7), fxopos60(8), fxopos55(9), fxopos50(10), fxopos45(11), fxopos40(12), fxopos35(13), fxopos30(14), fxopos25(15), fxopos20(16), fxopos15(17), fxopos10(18), fxopos05(19), fxopos0(20), fxoneg05(21), fxoneg10(22), fxoneg15(23), fxoneg20(24), fxoneg25(25), fxoneg30(26), fxoneg35(27), fxoneg40(28), fxoneg45(29), fxoneg50(30), fxoneg55(31), fxoneg60(32), fxoneg65(33), fxoneg70(34), fxoneg75(35), fxoneg80(36), fxoneg85(37), fxoneg90(38), fxoneg95(39), fxoneg100(40)}read-writeobsolete
aprisaXEFXOConnectionID
OBJECT-TYPE
Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.130.1.7AprisaXEConnectionIDread-writecurrent
aprisaXEFXOSignallingConnectionID
OBJECT-TYPE
Associated signalling cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.130.1.8AprisaXEConnectionIDread-writecurrent
aprisaXEFXOInputLevel
OBJECT-TYPE
Input Level -10.0 dBr to +1.0 dBr in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.130.1.9AprisaXEFXOInputLevelread-writecurrent
aprisaXEFXOOutputLevel
OBJECT-TYPE
Output Level -10.0 dBr to +1.0 dBr in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.130.1.10AprisaXEFXOOutputLevelread-writecurrent
aprisaXEFXOControlTable
OBJECT-TYPE
Control table for FXO.
1.3.6.1.4.1.14817.7.3.1.2.140not-accessiblecurrent
aprisaXEFXOControlTableEntry
OBJECT-TYPE
Entries for FXO table.
1.3.6.1.4.1.14817.7.3.1.2.140.1not-accessiblecurrent
aprisaXEFXOControlSlotIndex
OBJECT-TYPE
Slot index for FXO Control table.
1.3.6.1.4.1.14817.7.3.1.2.140.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEFXOSPMBandwidth
OBJECT-TYPE
Set the spm detector bandwidth to 1.5%, 3.5%, 5.5% or 7.5%.
1.3.6.1.4.1.14817.7.3.1.2.140.1.2INTEGER {perc15(0), perc35(1), perc55(2), perc75(3)}read-writecurrent
aprisaXEFXOSPMFrequency
OBJECT-TYPE
Set the spm detector frequency to 12kHz or 16kHz.
1.3.6.1.4.1.14817.7.3.1.2.140.1.3INTEGER {khz12(0), khz16(1)}read-writecurrent
aprisaXEFXOSPMLevel
OBJECT-TYPE
Set the spm detector level 0 to 27 dB.
1.3.6.1.4.1.14817.7.3.1.2.140.1.4AprisaXEFXSPMLevelread-writecurrent
aprisaXEFXOCasMode
OBJECT-TYPE
Set the CAS mode to XE,SE or 4Wire compatible.
1.3.6.1.4.1.14817.7.3.1.2.140.1.5INTEGER {casxe(0), casse(1), cas4w(2)}read-writecurrent
aprisaXEFXOCasSignal
OBJECT-TYPE
Set the CAS signal to normal or invert.
1.3.6.1.4.1.14817.7.3.1.2.140.1.6AprisaXESignalStateread-writeobsolete
aprisaXEFXOPCMLaw
OBJECT-TYPE
Set the PCM law to A-law or u-law.
1.3.6.1.4.1.14817.7.3.1.2.140.1.7AprisaXEPcmLawread-writecurrent
aprisaXEFXOOnHookSpeed
OBJECT-TYPE
Set the on hook speed to fast, medium or slow.
1.3.6.1.4.1.14817.7.3.1.2.140.1.8INTEGER {ohsFast(0), ohsMedium(1), ohsSlow(2)}read-writecurrent
aprisaXEFXORingerImpedance
OBJECT-TYPE
Set the ringer impedance to high or synthesized.
1.3.6.1.4.1.14817.7.3.1.2.140.1.9INTEGER {rzHigh(0), rxSynthesized(1)}read-writecurrent
aprisaXEFXORingerThreshold
OBJECT-TYPE
Set the ringer threshold to low, medium or high.
1.3.6.1.4.1.14817.7.3.1.2.140.1.10INTEGER {rtLow(0), rtMedium(1), rtHigh(2)}read-writecurrent
aprisaXEFXOLoopCurrentLimit
OBJECT-TYPE
Set the loop current limiter to off or on.
1.3.6.1.4.1.14817.7.3.1.2.140.1.11INTEGER {ilimOff(0), ilimOn(1)}read-writecurrent
aprisaXEFXOMinLoopCurrent
OBJECT-TYPE
Set the min loop current to low, medium or high.
1.3.6.1.4.1.14817.7.3.1.2.140.1.12INTEGER {miniLow(0), miniMedium(1), miniHigh(2)}read-writecurrent
aprisaXEFXOTipRingVoltage
OBJECT-TYPE
Set the tip ring voltage to low, medium or high.
1.3.6.1.4.1.14817.7.3.1.2.140.1.13INTEGER {dcvLow(0), dcvMedium(1), dcvHigh(2)}read-writecurrent
aprisaXEFXOLineImpedance
OBJECT-TYPE
Set the line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms || 120 nF), TBR21 - 270 Ohms + (750 Ohms || 150 nF), BT3 - 370 Ohms + (620 Ohms || 310 nF), BT Network - 320 Ohms + (1050 Ohms || 210 nF), China - 200 Ohms + (680 Ohms || 100 nF)
1.3.6.1.4.1.14817.7.3.1.2.140.1.14INTEGER {acim0(0), acim1(1), acim11(2), acim13(3), acim3(4), acim2(5), acim4(6), acim9(7), acim10(8)}read-writecurrent
aprisaXEFXOLineReversal
OBJECT-TYPE
Set the line reversal on/off.
1.3.6.1.4.1.14817.7.3.1.2.140.1.15INTEGER {fxoLineRevOn(0), fxoLineRevOff(1)}read-writeobsolete
aprisaXEFXOABitFault
OBJECT-TYPE
Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.16AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXOBBitRing
OBJECT-TYPE
Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.17AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXOCBitBilling
OBJECT-TYPE
Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.18AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXODBitReversals
OBJECT-TYPE
Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.19AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXOEchoCanceller
OBJECT-TYPE
Set the echo canceller to off, on or auto. The reserved values are for internal use only and cannot be set via SNMP.
1.3.6.1.4.1.14817.7.3.1.2.140.1.20INTEGER {fxoEchoCancellerOff(0), fxoEchoCancellerOn(1), fxoEchoCancellerAutoG164(2), fxoEchoCancellerAutoG165(3), fxoEchoCancellerReserved1(4), fxoEchoCancellerReserved2(5), fxoEchoCancellerReserved3(6)}read-writecurrent
aprisaXEFXOABitOffHook
OBJECT-TYPE
Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.21AprisaXE2WireSignalStateread-writecurrent
aprisaXEBackplaneConnectionTable
OBJECT-TYPE
Table of AprisaXE Cross connections.
1.3.6.1.4.1.14817.7.3.1.2.150not-accessiblecurrent
aprisaXEBackplaneConnectionTableEntry
OBJECT-TYPE
Table entries define a circuit carried ove a TDM bus.
1.3.6.1.4.1.14817.7.3.1.2.150.1not-accessiblecurrent
aprisaXEBackplaneConnectionID
OBJECT-TYPE
Handle to associate circuits with backplane connections.
1.3.6.1.4.1.14817.7.3.1.2.150.1.1AprisaXEConnectionIDread-writecurrent
aprisaXEBackplaneTdmBus
OBJECT-TYPE
TDM Bus to switch: busA - busD.
1.3.6.1.4.1.14817.7.3.1.2.150.1.2AprisaXETdmBusread-writecurrent
aprisaXEBackplaneStartBitPos
OBJECT-TYPE
Start bit position on the associated TDM bus (0 - 2047).
1.3.6.1.4.1.14817.7.3.1.2.150.1.3INTEGER (0..2047)read-writecurrent
aprisaXEBackplaneLength
OBJECT-TYPE
Number of bits to place on the backplane TDM bus (0 - 2047).
1.3.6.1.4.1.14817.7.3.1.2.150.1.4INTEGER (0..2047)read-writecurrent
aprisaXEBackplaneInterface
OBJECT-TYPE
The type of circuit this backplane connection is carrying.
1.3.6.1.4.1.14817.7.3.1.2.150.1.5AprisaXEInterfaceCnxnTyperead-writecurrent
aprisaXEAggregateConnectionTable
OBJECT-TYPE
Table of Aggregated backplane connections used for interfaces with further cross-connection capability.
1.3.6.1.4.1.14817.7.3.1.2.160not-accessiblecurrent
aprisaXEAggregateConnectionTableEntry
OBJECT-TYPE
1.3.6.1.4.1.14817.7.3.1.2.160.1not-accessiblecurrent
aprisaXEAggregateBackplaneID
OBJECT-TYPE
Backplane Connection identifier.
1.3.6.1.4.1.14817.7.3.1.2.160.1.1Integer32read-onlycurrent
aprisaXEAggregateInterfaceID
OBJECT-TYPE
1.3.6.1.4.1.14817.7.3.1.2.160.1.2Integer32read-onlycurrent
aprisaXEAggregateStartBitPos
OBJECT-TYPE
Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.160.1.3INTEGER (0..2047)read-onlycurrent
aprisaXEAggregateLength
OBJECT-TYPE
Number of bits required for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.160.1.4INTEGER (0..2047)read-onlycurrent
aprisaXEAggregateOffset
OBJECT-TYPE
Offset into the aggregate connection where this interface connection is placed.
1.3.6.1.4.1.14817.7.3.1.2.160.1.5INTEGER (0..2047)read-onlycurrent
aprisaXEAggregateE1Port
OBJECT-TYPE
Port number associated with this connection.
1.3.6.1.4.1.14817.7.3.1.2.160.1.6AprisaXEPortNumberread-onlycurrent
aprisaXEAggregateControl
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.170
aprisaXEAggregateControlBackplaneID
OBJECT-TYPE
The backplane ID to add or delete.
1.3.6.1.4.1.14817.7.3.1.2.170.1INTEGER (0..2047)read-writecurrent
aprisaXEAggregateControlInterfaceID
OBJECT-TYPE
Aggregate connection identifier.
1.3.6.1.4.1.14817.7.3.1.2.170.2INTEGER (0..2047)read-writecurrent
aprisaXEAggregateControlStartBitPos
OBJECT-TYPE
Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.170.3INTEGER (0..2047)read-writecurrent
aprisaXEAggregateControlLength
OBJECT-TYPE
Number of bits required for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.170.4INTEGER (0..2047)read-writecurrent
aprisaXEAggregateControlOffset
OBJECT-TYPE
Offset into the aggregate connection where this interface connection is placed.
1.3.6.1.4.1.14817.7.3.1.2.170.5INTEGER (0..2047)read-writecurrent
aprisaXEAggregateControlCommand
OBJECT-TYPE
Command to send to act upon the rows in the Aggregate Connection table.
1.3.6.1.4.1.14817.7.3.1.2.170.6INTEGER {noCommand(0), addCommand(1), deleteCommand(2)}read-writecurrent
aprisaXEBackplaneControl
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.180
aprisaXEBackplaneControlConnectionID
OBJECT-TYPE
The Backplane Connection ID to add or delete.
1.3.6.1.4.1.14817.7.3.1.2.180.1AprisaXEConnectionIDread-writecurrent
aprisaXEBackplaneControlTdmBus
OBJECT-TYPE
TDM Bus to switch: busA - busD.
1.3.6.1.4.1.14817.7.3.1.2.180.2AprisaXETdmBusread-writecurrent
aprisaXEBackplaneControlStartBitPos
OBJECT-TYPE
Start bit position on the associated TDM bus (0 - 2047).
1.3.6.1.4.1.14817.7.3.1.2.180.3INTEGER (0..2047)read-writecurrent
aprisaXEBackplaneControlLength
OBJECT-TYPE
Number of bits to place on the backplane TDM bus (0 - 2048).
1.3.6.1.4.1.14817.7.3.1.2.180.4INTEGER (0..2048)read-writecurrent
aprisaXEBackplaneControlInterface
OBJECT-TYPE
The type of circuit this backplane connection is carrying.
1.3.6.1.4.1.14817.7.3.1.2.180.5AprisaXEInterfaceCnxnTyperead-writecurrent
aprisaXEBackplaneControlCommand
OBJECT-TYPE
Command to send to act upon rows in the Backplane Connection table.
1.3.6.1.4.1.14817.7.3.1.2.180.6INTEGER {noCommand(0), addCommand(1), deleteCommand(2)}read-writecurrent
aprisaXEFXSPortControlTable
OBJECT-TYPE
Port Control table for FXS.
1.3.6.1.4.1.14817.7.3.1.2.190not-accessiblecurrent
aprisaXEFXSPortControlTableEntry
OBJECT-TYPE
Entries for FXS table.
1.3.6.1.4.1.14817.7.3.1.2.190.1not-accessiblecurrent
aprisaXEFXSPortControlSlotIndex
OBJECT-TYPE
Slot index for FXS Control table.
1.3.6.1.4.1.14817.7.3.1.2.190.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEFXSPortIndex
OBJECT-TYPE
Port index for FXS Control table.
1.3.6.1.4.1.14817.7.3.1.2.190.1.2AprisaXEPortNumberread-onlycurrent
aprisaXEFXSLoopback
OBJECT-TYPE
Loopback control on or off for ports.
1.3.6.1.4.1.14817.7.3.1.2.190.1.3FourRFLoopbackread-writecurrent
aprisaXEFXSAdpcmCompression
OBJECT-TYPE
ADPCM compression 16, 24, 32, 64 kbps or none.
1.3.6.1.4.1.14817.7.3.1.2.190.1.4AprisaXEAdpcmCompressionread-writecurrent
aprisaXEFXSRxGain
OBJECT-TYPE
Rx gain -9.5 dB to +3 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.5INTEGER {fxsrxpos30(0), fxsrxpos25(1), fxsrxpos20(2), fxsrxpos15(3), fxsrxpos10(4), fxsrxpos05(5), fxsrxpos0(6), fxsrxneg05(7), fxsrxneg10(8), fxsrxneg15(9), fxsrxneg20(10), fxsrxneg25(11), fxsrxneg30(12), fxsrxneg35(13), fxsrxneg40(14), fxsrxneg45(15), fxsrxneg50(16), fxsrxneg55(17), fxsrxneg60(18), fxsrxneg65(19), fxsrxneg70(20), fxsrxneg75(21), fxsrxneg80(22), fxsrxneg85(23), fxsrxneg90(24), fxsrxneg95(25)}read-writeobsolete
aprisaXEFXSTxGain
OBJECT-TYPE
Tx gain -3 dB to 9.5 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.6INTEGER {fxstxpos95(0), fxstxpos90(1), fxstxpos85(2), fxstxpos80(3), fxstxpos75(4), fxstxpos70(5), fxstxpos65(6), fxstxpos60(7), fxstxpos55(8), fxstxpos50(9), fxstxpos45(10), fxstxpos40(11), fxstxpos35(12), fxstxpos30(13), fxstxpos25(14), fxstxpos20(15), fxstxpos15(16), fxstxpos10(17), fxstxpos05(18), fxstxpos0(19), fxstxneg05(20), fxstxneg10(21), fxstxneg15(22), fxstxneg20(23), fxstxneg25(24), fxstxneg30(25)}read-writeobsolete
aprisaXEFXSConnectionID
OBJECT-TYPE
Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.190.1.7AprisaXEConnectionIDread-writecurrent
aprisaXEFXSSignallingConnectionID
OBJECT-TYPE
Associated signalling cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.190.1.8AprisaXEConnectionIDread-writecurrent
aprisaXEFXSInputLevel
OBJECT-TYPE
Input Level -9.0 dBr to +3.0 dBr in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.9AprisaXEFXSInputLevelread-writecurrent
aprisaXEFXSOutputLevel
OBJECT-TYPE
Output Level -9.5 dBr to +2.5 dBr in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.10AprisaXEFXSOutputLevelread-writecurrent
aprisaXEFXSPathMute
OBJECT-TYPE
Applies DFXS Mute Function - No Mute, Mute Rx or Mute Tx.
1.3.6.1.4.1.14817.7.3.1.2.190.1.11AprisaXEFXSPathMuteread-writecurrent
aprisaXEFXSControlTable
OBJECT-TYPE
Control table for FXS.
1.3.6.1.4.1.14817.7.3.1.2.195not-accessiblecurrent
aprisaXEFXSControlTableEntry
OBJECT-TYPE
Entries for FXS table.
1.3.6.1.4.1.14817.7.3.1.2.195.1not-accessiblecurrent
aprisaXEFXSControlSlotIndex
OBJECT-TYPE
Slot index for FXS Control table.
1.3.6.1.4.1.14817.7.3.1.2.195.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEFXSPCMLaw
OBJECT-TYPE
Set the PCM law to A-law or u-law.
1.3.6.1.4.1.14817.7.3.1.2.195.1.2AprisaXEPcmLawread-writecurrent
aprisaXEFXSEchoCanceller
OBJECT-TYPE
Set the echo canceller to on or off.
1.3.6.1.4.1.14817.7.3.1.2.195.1.3INTEGER {echoCancellerOff(0), echoCancellerOn(1)}read-writecurrent
aprisaXEFXSBillingToneFrequency
OBJECT-TYPE
Set the billing tone generator frequency to 12kHz or 16kHz.
1.3.6.1.4.1.14817.7.3.1.2.195.1.4INTEGER {khz12(0), khz16(1)}read-writecurrent
aprisaXEFXSBillingToneAmplitude
OBJECT-TYPE
Set the billing tone generator amplitude to 400mV, 300mV, 250mV, 200mV, 150mV, 100mV or 50mV. Note, that software release 7.3.x only supports 400mV, 300mV, 200mV and 100mV.
1.3.6.1.4.1.14817.7.3.1.2.195.1.5INTEGER {mv300(0), mv250(1), mv200(2), mv150(3), mv100(4), mv50(5), mv400(6)}read-writecurrent
aprisaXEFXSBillingToneDecay
OBJECT-TYPE
Set the billing tone generator attack decay ramp to 0.2ms, 0.5ms, 1ms, 2ms, 5ms, 10ms or 20ms.
1.3.6.1.4.1.14817.7.3.1.2.195.1.6INTEGER {ms02(0), ms05(1), ms1(2), ms2(3), ms5(4), ms10(5), ms20(6)}read-writecurrent
aprisaXEFXSRingerFrequency
OBJECT-TYPE
Set the ringer frequency to 17Hz, 25Hz or 50Hz.
1.3.6.1.4.1.14817.7.3.1.2.195.1.7INTEGER {hz17(0), hz25(1), hz50(2)}read-writecurrent
aprisaXEFXSRingerAmplitude
OBJECT-TYPE
Set the ringer amplitude to 40 V RMS, 45 V RMS, 50 V RMS, 55 V RMS or 60 V RMS.
1.3.6.1.4.1.14817.7.3.1.2.195.1.8INTEGER {vrms40(0), vrms45(1), vrms50(2), vrms55(3), vrms60(4)}read-writecurrent
aprisaXEFXSLineImpedance
OBJECT-TYPE
Set the subscriber line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms || 120 nF), TBR21 - 270 Ohms + (750 Ohms || 150 nF), BT3 - 370 Ohms + (620 Ohms || 310 nF)
1.3.6.1.4.1.14817.7.3.1.2.195.1.9INTEGER {lineImpd1(0), lineImpd2(1), lineImpd3(2), lineImpd4(3), lineImpd5(4), lineImpd6(5), lineImpd7(6)}read-writecurrent
aprisaXEFXSCasMode
OBJECT-TYPE
Set the CAS mode to XE,SE or 4Wire compatible.
1.3.6.1.4.1.14817.7.3.1.2.195.1.10INTEGER {casxe(0), casse(1), cas4w(2)}read-writecurrent
aprisaXEFXSCasSignal
OBJECT-TYPE
Set the CAS signal to normal or invert.
1.3.6.1.4.1.14817.7.3.1.2.195.1.11AprisaXESignalStateread-writeobsolete
aprisaXEFXSTransHybridBalance
OBJECT-TYPE
Set the trans hybrid balance to 4.08dB, 2.5dB, 1.16dB, 0dB, -1.02dB, -1.94dB, -2.77dB, Off
1.3.6.1.4.1.14817.7.3.1.2.195.1.12INTEGER {transHybridBal1(0), transHybridBal2(1), transHybridBal3(2), transHybridBal4(3), transHybridBal5(4), transHybridBal6(5), transHybridBal7(6), transHybridBal8(7)}read-writecurrent
aprisaXEFXSLineReversal
OBJECT-TYPE
Set the line reversal on/off.
1.3.6.1.4.1.14817.7.3.1.2.195.1.13INTEGER {fxsLineRevOn(0), fxsLineRevOff(1)}read-writeobsolete
aprisaXEFXSCalibrate
OBJECT-TYPE
Recalibrate the card yes/no.
1.3.6.1.4.1.14817.7.3.1.2.195.1.14INTEGER {fxsCalibrateNo(0), fxsCalibrateYes(1)}read-writecurrent
aprisaXEFXSABitFault
OBJECT-TYPE
Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.15AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXSBBitRing
OBJECT-TYPE
Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.16AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXSCBitBilling
OBJECT-TYPE
Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.17AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXSDBitReversals
OBJECT-TYPE
Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.18AprisaXE2WireSignalStateread-writecurrent
aprisaXEFXSLoopParameters
OBJECT-TYPE
Set the loop parameters to 'default' or 'Telkom SA Limited'.
1.3.6.1.4.1.14817.7.3.1.2.195.1.19INTEGER {fxsLoopParamDefault(0), fxsLoopParamTelkomSA(1)}read-writecurrent
aprisaXEFXSABitOffHook
OBJECT-TYPE
Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.20AprisaXE2WireSignalStateread-writecurrent
aprisaXECrossConnectControl
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.200
aprisaXECrossConnectControlCommand
OBJECT-TYPE
Command to send to delete all current cross-connections or to activate a new set of cross-connections.
1.3.6.1.4.1.14817.7.3.1.2.200.1INTEGER {noCommand(0), deleteCommand(1), activateCommand(2)}read-writecurrent
aprisaXEMotherboardExtendedModeCapable
OBJECT-TYPE
Allows the cross connect application to determine whether to stripe cross connections or not.
1.3.6.1.4.1.14817.7.3.1.2.200.2INTEGER {extModeNo(0), extModeYes(1)}read-onlycurrent
aprisaXEEthernetActivationStatus
OBJECT-TYPE
Ethernet activation status i.e activated, failed or currently busy activating.
1.3.6.1.4.1.14817.7.3.1.2.200.3AprisaXECCActivationStatusread-onlycurrent
aprisaXECCActivationStatusTable
OBJECT-TYPE
CC Activation status table.
1.3.6.1.4.1.14817.7.3.1.2.202not-accessiblecurrent
aprisaXECCActivationStatusTableEntry
OBJECT-TYPE
Entries for CC Activation status table.
1.3.6.1.4.1.14817.7.3.1.2.202.1not-accessiblecurrent
aprisaXECCActivationStatusSlotIndex
OBJECT-TYPE
Slot index for CC Activation Status table.
1.3.6.1.4.1.14817.7.3.1.2.202.1.1AprisaXESlotNumberread-onlycurrent
aprisaXECCActivationStatus
OBJECT-TYPE
Cross-connect activation status i.e activated, failed or currently busy activating.
1.3.6.1.4.1.14817.7.3.1.2.202.1.2AprisaXECCActivationStatusread-onlycurrent
aprisaXEHSSControlTable
OBJECT-TYPE
Control table for HSS.
1.3.6.1.4.1.14817.7.3.1.2.207not-accessiblecurrent
aprisaXEHSSControlTableEntry
OBJECT-TYPE
Entries for HSS table.
1.3.6.1.4.1.14817.7.3.1.2.207.1not-accessiblecurrent
aprisaXEHSSControlSlotIndex
OBJECT-TYPE
Slot index for HSS Control Table.
1.3.6.1.4.1.14817.7.3.1.2.207.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEHSSConnectionID
OBJECT-TYPE
Backplane Connection ID for data connection.
1.3.6.1.4.1.14817.7.3.1.2.207.1.2AprisaXEConnectionIDread-writecurrent
aprisaXEHSSSignallingID
OBJECT-TYPE
Backplane connection ID for signalling/control connection.
1.3.6.1.4.1.14817.7.3.1.2.207.1.3AprisaXEConnectionIDread-writecurrent
aprisaXEHSSEquipmentMode
OBJECT-TYPE
Terminal Equipment mode, DCE or DTE, this is a direct reflection of the equipment mode based on the type of cable currently connected. The value is not defined if no cable is attached.
1.3.6.1.4.1.14817.7.3.1.2.207.1.4AprisaXESerialEquipmentModeread-onlycurrent
aprisaXEHSSLoopback
OBJECT-TYPE
Interface loopback control.
1.3.6.1.4.1.14817.7.3.1.2.207.1.5FourRFLoopbackread-writecurrent
aprisaXEHSSNetworkClockSource
OBJECT-TYPE
Controls whether the port drive the clock source or not.
1.3.6.1.4.1.14817.7.3.1.2.207.1.6FourRFNetworkClockSelectread-writecurrent
aprisaXEHSSSerialBaudRate
OBJECT-TYPE
Serial Baud rate where 1 = 8kbps and 256 = 2Mbps.
1.3.6.1.4.1.14817.7.3.1.2.207.1.7INTEGER (1..256)read-writecurrent
aprisaXEHSSV110BaudRate
OBJECT-TYPE
V110 baud rate.
1.3.6.1.4.1.14817.7.3.1.2.207.1.8INTEGER {v110-600(0), v110-1200(1), v110-2400(2), v110-4800(3), v110-7200(4), v110-9600(5), v110-12000(6), v110-14400(7), v110-19200(8), v110-24000(9), v110-28800(10), v110-38400(11)}read-writecurrent
aprisaXEHSSSendHandshakingMode
OBJECT-TYPE
Select 1 of 8 RTS/CTS modes of operation.
1.3.6.1.4.1.14817.7.3.1.2.207.1.9INTEGER {rts-ctsOff(0), rts-ctsOn(1), rts-ctsCarrier(2), rts-ctsCarrierRemote(3), rts-ctsCarrierLocalDCD(4), rts-ctsCarrierLocalRTS(5), rts-ctsCarrierLocalRTS1ms(6), rts-ctsCarrierLocalRTS24ms(7)}read-writecurrent
aprisaXEHSSDataReadyMode
OBJECT-TYPE
Select 1 of 8 DSR/DTR modes.
1.3.6.1.4.1.14817.7.3.1.2.207.1.10INTEGER {dsr-dtrOff(0), dsr-dtrOn(1), dsr-dtrCarrier(2), dsr-dtrCarrierRemote(3)}read-writecurrent
aprisaXEHSSCarrierDetectMode
OBJECT-TYPE
Select 1 of 4 DCD modes.
1.3.6.1.4.1.14817.7.3.1.2.207.1.11INTEGER {dcdOff(0), dcdOn(1), dcdCarrierRemoteDCD(2), dcdCarrierLocalDTR(3)}read-writecurrent
aprisaXEHSSClockSelection
OBJECT-TYPE
Select the clock mode internal to the HSS traffic path.
1.3.6.1.4.1.14817.7.3.1.2.207.1.12INTEGER {hssClockInternal(0), hssClockXTxC(1), hssClockTxC(2), hssClockOverhead(3), hssClockNoOverhead(4), hssClockXTxC-RxC(5), hssClockXTxCNoOverhead(6)}read-writecurrent
aprisaXEHSSXTxCEnabled
OBJECT-TYPE
Select whether XTxC generation is enabled or disabled for the port. The default is enabled.
1.3.6.1.4.1.14817.7.3.1.2.207.1.13INTEGER {hssxTxCEnabled(0), hssxTxCDisabled(1)}read-writecurrent
aprisaXEHSSSerialMode
OBJECT-TYPE
Indicates the type of serial interface cable is connected to the HSS port.
1.3.6.1.4.1.14817.7.3.1.2.207.1.14AprisaXEHssSerialModeread-onlycurrent
aprisaXEV24PortControlTable
OBJECT-TYPE
Port Control table for V24.
1.3.6.1.4.1.14817.7.3.1.2.210not-accessiblecurrent
aprisaXEV24PortControlTableEntry
OBJECT-TYPE
Entries for V24 table.
1.3.6.1.4.1.14817.7.3.1.2.210.1not-accessiblecurrent
aprisaXEV24PortControlSlotIndex
OBJECT-TYPE
Slot index for V24 Control table.
1.3.6.1.4.1.14817.7.3.1.2.210.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEV24PortIndex
OBJECT-TYPE
Port index for V24 Control table.
1.3.6.1.4.1.14817.7.3.1.2.210.1.2AprisaXEPortNumberread-onlycurrent
aprisaXEV24BaudRate
OBJECT-TYPE
Baud Rate from 300 baud to 115200 baud.
1.3.6.1.4.1.14817.7.3.1.2.210.1.3INTEGER {v24-300(0), v24-600(1), v24-1200(2), v24-2400(3), v24-4800(4), v24-7200(5), v24-9600(6), v24-12800(7), v24-14400(8), v24-19200(9), v24-23040(10), v24-28800(11), v24-38400(12), v24-57600(13), v24-115200(14)}read-writecurrent
aprisaXEV24Loopback
OBJECT-TYPE
Loopback control on or off for ports.
1.3.6.1.4.1.14817.7.3.1.2.210.1.4FourRFLoopbackread-writecurrent
aprisaXEV24DataBits
OBJECT-TYPE
No of data bits used, 7 or 8.
1.3.6.1.4.1.14817.7.3.1.2.210.1.5INTEGER {databits7(0), databits8(1)}read-writecurrent
aprisaXEV24StopBits
OBJECT-TYPE
No of stop bits used, 1 or 2.
1.3.6.1.4.1.14817.7.3.1.2.210.1.6INTEGER {stopbits1(0), stopbits2(1)}read-writecurrent
aprisaXEV24ParityBits
OBJECT-TYPE
No of parity bits used, 0 or 1.
1.3.6.1.4.1.14817.7.3.1.2.210.1.7INTEGER {paritybits0(0), paritybits1(1)}read-writecurrent
aprisaXEV24ConnectionID
OBJECT-TYPE
Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.210.1.8AprisaXEConnectionIDread-writecurrent
aprisaXEDualJetBoardTable
OBJECT-TYPE
Table of Dual E1 card specific configuration details.
1.3.6.1.4.1.14817.7.3.1.2.220not-accessiblecurrent
aprisaXEDualJetBoardEntry
OBJECT-TYPE
Dual E1 configuration details.
1.3.6.1.4.1.14817.7.3.1.2.220.1not-accessiblecurrent
aprisaXEDualJetBoardTableIndex
OBJECT-TYPE
Dual E1 board indexed by slot.
1.3.6.1.4.1.14817.7.3.1.2.220.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEDualJetPortTable
OBJECT-TYPE
Table based on slot and port of DualJet cards alarms.
1.3.6.1.4.1.14817.7.3.1.2.221not-accessiblecurrent
aprisaXEDualJetPortEntry
OBJECT-TYPE
Dual E1 port alarms.
1.3.6.1.4.1.14817.7.3.1.2.221.1not-accessiblecurrent
aprisaXEDualJetPortTableSlot
OBJECT-TYPE
Port table index based on slot number.
1.3.6.1.4.1.14817.7.3.1.2.221.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEDualJetPortTablePort
OBJECT-TYPE
Port table index based on port number.
1.3.6.1.4.1.14817.7.3.1.2.221.1.2AprisaXEPortNumberread-onlycurrent
aprisaXEDualJetAISAlarmStatus
OBJECT-TYPE
AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.221.1.3FourRFAlarmStatusread-onlycurrent
aprisaXEDualJetAISAlarmSeverity
OBJECT-TYPE
AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.221.1.4FourRFAlarmSeverityread-onlycurrent
aprisaXEDualJetAISAlarmEnabled
OBJECT-TYPE
AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.221.1.5FourRFAlarmEnabledread-onlycurrent
aprisaXEDualJetLOSAlarmStatus
OBJECT-TYPE
LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.221.1.6FourRFAlarmStatusread-onlycurrent
aprisaXEDualJetLOSAlarmSeverity
OBJECT-TYPE
LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.221.1.7FourRFAlarmSeverityread-onlycurrent
aprisaXEDualJetLOSAlarmEnabled
OBJECT-TYPE
LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.221.1.8FourRFAlarmEnabledread-onlycurrent
aprisaXEDualJetIFConfigTable
OBJECT-TYPE
Switch data table which describes the allocation of user data on to the TDM busses.
1.3.6.1.4.1.14817.7.3.1.2.222not-accessiblecurrent
aprisaXEDualJetIFConfigEntry
OBJECT-TYPE
Dual JET config data.
1.3.6.1.4.1.14817.7.3.1.2.222.1not-accessiblecurrent
aprisaXEDualJetIFConfigSlotIndex
OBJECT-TYPE
Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.222.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEDualJetIFConfigPortIndex
OBJECT-TYPE
Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.222.1.2AprisaXEPortNumberread-onlycurrent
aprisaXEDualJetTrafficType
OBJECT-TYPE
Controls the traffic type on a Dual JET port.
1.3.6.1.4.1.14817.7.3.1.2.222.1.3AprisaXEQuadJetTrafficTyperead-writecurrent
aprisaXEDualJetLoopback
OBJECT-TYPE
Controls the traffic loopback on a Dual JET port.
1.3.6.1.4.1.14817.7.3.1.2.222.1.4FourRFLoopbackread-writeobsolete
aprisaXEDualJetLineEncoding
OBJECT-TYPE
Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
1.3.6.1.4.1.14817.7.3.1.2.222.1.5AprisaXEQuadJetLineEncodingread-writecurrent
aprisaXEDualJetPcmMode
OBJECT-TYPE
Controls the PCM mode, PCM31 or PCM30C.
1.3.6.1.4.1.14817.7.3.1.2.222.1.6AprisaXEPcmModeread-writecurrent
aprisaXEDualJetClockSource
OBJECT-TYPE
Controls whether the port drives the clock soure or not.
1.3.6.1.4.1.14817.7.3.1.2.222.1.7FourRFNetworkClockSelectread-writecurrent
aprisaXEDualJetLineRadioLoopback
OBJECT-TYPE
This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
1.3.6.1.4.1.14817.7.3.1.2.222.1.8AprisaXEQuadJetLoopbacksread-writecurrent
aprisaXEDualJetTxWaveFormShaper
OBJECT-TYPE
This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
1.3.6.1.4.1.14817.7.3.1.2.222.1.9AprisaXEQuadJetWaveFormShapersread-writecurrent
aprisaXESingleJetBoardTable
OBJECT-TYPE
Table of Single E1 card specific configuration details.
1.3.6.1.4.1.14817.7.3.1.2.225not-accessiblecurrent
aprisaXESingleJetBoardEntry
OBJECT-TYPE
Single E1 configuration details.
1.3.6.1.4.1.14817.7.3.1.2.225.1not-accessiblecurrent
aprisaXESingleJetBoardTableIndex
OBJECT-TYPE
Single E1 board indexed by slot.
1.3.6.1.4.1.14817.7.3.1.2.225.1.1AprisaXESlotNumberread-onlycurrent
aprisaXESingleJetPortTable
OBJECT-TYPE
Table based on slot and port of SingleJet cards alarms.
1.3.6.1.4.1.14817.7.3.1.2.226not-accessiblecurrent
aprisaXESingleJetPortEntry
OBJECT-TYPE
Single E1 port alarms.
1.3.6.1.4.1.14817.7.3.1.2.226.1not-accessiblecurrent
aprisaXESingleJetPortTableSlot
OBJECT-TYPE
Port table index based on slot number.
1.3.6.1.4.1.14817.7.3.1.2.226.1.1AprisaXESlotNumberread-onlycurrent
aprisaXESingleJetPortTablePort
OBJECT-TYPE
Port table index based on port number.
1.3.6.1.4.1.14817.7.3.1.2.226.1.2AprisaXEPortNumberread-onlycurrent
aprisaXESingleJetAISAlarmStatus
OBJECT-TYPE
AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.226.1.3FourRFAlarmStatusread-onlycurrent
aprisaXESingleJetAISAlarmSeverity
OBJECT-TYPE
AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.226.1.4FourRFAlarmSeverityread-onlycurrent
aprisaXESingleJetAISAlarmEnabled
OBJECT-TYPE
AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.226.1.5FourRFAlarmEnabledread-onlycurrent
aprisaXESingleJetLOSAlarmStatus
OBJECT-TYPE
LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.226.1.6FourRFAlarmStatusread-onlycurrent
aprisaXESingleJetLOSAlarmSeverity
OBJECT-TYPE
LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.226.1.7FourRFAlarmSeverityread-onlycurrent
aprisaXESingleJetLOSAlarmEnabled
OBJECT-TYPE
LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.226.1.8FourRFAlarmEnabledread-onlycurrent
aprisaXESingleJetIFConfigTable
OBJECT-TYPE
Switch data table which describes the allocation of user data on to the TDM busses.
1.3.6.1.4.1.14817.7.3.1.2.227not-accessiblecurrent
aprisaXESingleJetIFConfigEntry
OBJECT-TYPE
Single JET config data.
1.3.6.1.4.1.14817.7.3.1.2.227.1not-accessiblecurrent
aprisaXESingleJetIFConfigSlotIndex
OBJECT-TYPE
Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.227.1.1AprisaXESlotNumberread-onlycurrent
aprisaXESingleJetIFConfigPortIndex
OBJECT-TYPE
Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.227.1.2AprisaXEPortNumberread-onlycurrent
aprisaXESingleJetTrafficType
OBJECT-TYPE
Controls the traffic type on a Single JET port.
1.3.6.1.4.1.14817.7.3.1.2.227.1.3AprisaXEQuadJetTrafficTyperead-writecurrent
aprisaXESingleJetLoopback
OBJECT-TYPE
Controls the traffic loopback on a Single JET port.
1.3.6.1.4.1.14817.7.3.1.2.227.1.4FourRFLoopbackread-writeobsolete
aprisaXESingleJetLineEncoding
OBJECT-TYPE
Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
1.3.6.1.4.1.14817.7.3.1.2.227.1.5AprisaXEQuadJetLineEncodingread-writecurrent
aprisaXESingleJetPcmMode
OBJECT-TYPE
Controls the PCM mode, PCM31 or PCM30C.
1.3.6.1.4.1.14817.7.3.1.2.227.1.6AprisaXEPcmModeread-writecurrent
aprisaXESingleJetClockSource
OBJECT-TYPE
Controls whether the port drives the clock soure or not.
1.3.6.1.4.1.14817.7.3.1.2.227.1.7FourRFNetworkClockSelectread-writecurrent
aprisaXESingleJetLineRadioLoopback
OBJECT-TYPE
This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
1.3.6.1.4.1.14817.7.3.1.2.227.1.8AprisaXEQuadJetLoopbacksread-writecurrent
aprisaXESingleJetTxWaveFormShaper
OBJECT-TYPE
This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
1.3.6.1.4.1.14817.7.3.1.2.227.1.9AprisaXEQuadJetWaveFormShapersread-writecurrent
aprisaXEPSCControlTable
OBJECT-TYPE
Control table for PSC.
1.3.6.1.4.1.14817.7.3.1.2.230not-accessiblecurrent
aprisaXEPSCControlTableEntry
OBJECT-TYPE
Entries for PSC table.
1.3.6.1.4.1.14817.7.3.1.2.230.1not-accessiblecurrent
aprisaXEPSCControlSlotIndex
OBJECT-TYPE
Slot index for PSC Control Table.
1.3.6.1.4.1.14817.7.3.1.2.230.1.1AprisaXESlotNumberread-onlycurrent
aprisaXEPSCActiveRadio
OBJECT-TYPE
Indicates the reception mode of the PSC.
1.3.6.1.4.1.14817.7.3.1.2.230.1.2AprisaXEPSCActiveRadioread-writecurrent
aprisaXEPSCActiveTx
OBJECT-TYPE
Indicates the currently active transmitter.
1.3.6.1.4.1.14817.7.3.1.2.230.1.3AprisaXEPSCActiveTxread-onlycurrent
aprisaXEPSCDemodAlignmentStatusPSC
OBJECT-TYPE
Status of the demodulator alignment on the PSC.
1.3.6.1.4.1.14817.7.3.1.2.230.1.4FourRFAlarmStatusread-onlycurrent
aprisaXEPSCDemodAlignmentStatusPIC
OBJECT-TYPE
Status of the demodulator alignment on the PIC.
1.3.6.1.4.1.14817.7.3.1.2.230.1.5FourRFAlarmStatusread-onlycurrent
aprisaXEHSDParameterCompare
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.235
aprisaXEHSDParameterMismatch
OBJECT-TYPE
If there is a parameter (OID) mismatch between Radio A and Radio B
1.3.6.1.4.1.14817.7.3.1.2.235.1FourRFAlarmStatusread-onlycurrent
aprisaXEHSDParameterCompareChecking
OBJECT-TYPE
Enables/disables HSD paramter compare checking between Radio A and Radio B
1.3.6.1.4.1.14817.7.3.1.2.235.2INTEGER {off(0), on(1)}read-writecurrent
aprisaXESoftwareUpgradeControl
OBJECT-IDENTITY
1.3.6.1.4.1.14817.7.3.1.2.300
aprisaXESoftwareUpgradeVersion
OBJECT-TYPE
New software version details of the form x_y_z.
1.3.6.1.4.1.14817.7.3.1.2.300.1DisplayString (SIZE(0..16))read-writecurrent
aprisaXESoftwareUpgradeCommand
OBJECT-TYPE
Command used to instigate a software upgrade.
1.3.6.1.4.1.14817.7.3.1.2.300.2INTEGER {none(0), upgrade(1)}read-writecurrent
aprisaXESoftwareUpgradeResult
OBJECT-TYPE
Status of a software upgrade, this will have to be polled to follow the upload progress.
1.3.6.1.4.1.14817.7.3.1.2.300.3FourRFProcessResultTyperead-onlycurrent
aprisaXEEvents
OBJECT-IDENTITY
The root of the OID sub-tree for the AprisaXE product events.
1.3.6.1.4.1.14817.7.3.1.3current
aprisaXEEventsV2
OBJECT-IDENTITY
The AprisaXE product events, ensures SNMPv1 compatibility.
1.3.6.1.4.1.14817.7.3.1.3.0current
aprisaXETestObjects
OBJECT-IDENTITY
The root of the OID sub-tree for the AprisaXE test objects.
1.3.6.1.4.1.14817.7.3.1.4current

Conformance

NameOIDStatus
aprisaXETerminalGroup
OBJECT-GROUP
The AprisaXE terminal settings group.
1.3.6.1.4.1.14817.7.3.1.1.1current
aprisaXEPerformanceGroup
OBJECT-GROUP
The AprisaXE terminal performance group.
1.3.6.1.4.1.14817.7.3.1.1.6current
aprisaXEExternalAlarm1Group
OBJECT-GROUP
The AprisaXE first external alarm input group.
1.3.6.1.4.1.14817.7.3.1.1.11current
aprisaXEExternalAlarmOutputOneGroup
OBJECT-GROUP
The AprisaXE first external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.12current
aprisaXEExternalAlarmOutputTwoGroup
OBJECT-GROUP
The AprisaXE second external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.13current
aprisaXEExternalAlarmOutputThreeGroup
OBJECT-GROUP
The AprisaXE third external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.14current
aprisaXEExternalAlarmOutputFourGroup
OBJECT-GROUP
The AprisaXE fourth external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.15current
aprisaXEExternalAlarm2Group
OBJECT-GROUP
The AprisaXE second external alarm input group.
1.3.6.1.4.1.14817.7.3.1.1.16current
aprisaXEExternalAlarmsGroup
OBJECT-GROUP
The AprisaXE general external alarm details group.
1.3.6.1.4.1.14817.7.3.1.1.17current
aprisaXERemoteAlarmGroup
OBJECT-GROUP
The AprisaXE remote alarm status group. This group has been replaced by the now mappable external alarm output OIDs aprisaXEExternalAlarmOutputXXXGroup.
1.3.6.1.4.1.14817.7.3.1.1.21obsolete
aprisaXEMHSBGroup
OBJECT-GROUP
The aprisaXE MHSB group.
1.3.6.1.4.1.14817.7.3.1.1.23current
aprisaXEFanGroup
OBJECT-GROUP
The AprisaXE fan status group.
1.3.6.1.4.1.14817.7.3.1.1.26current
aprisaXEAlarmControlGroup
OBJECT-GROUP
The AprisaXE alarm control group.
1.3.6.1.4.1.14817.7.3.1.1.32current
aprisaXETransmitterGroup
OBJECT-GROUP
The AprisaXE transmitter settings group.
1.3.6.1.4.1.14817.7.3.1.1.36current
aprisaXETReceiverGroup
OBJECT-GROUP
The AprisaXE Receiver settings group.
1.3.6.1.4.1.14817.7.3.1.1.46current
aprisaXEModemGroup
OBJECT-GROUP
The AprisaXE Modem settings group.
1.3.6.1.4.1.14817.7.3.1.1.53current
aprisaXEForwardPowerHiAlarmsGroup
OBJECT-GROUP
The AprisaXE forward power too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.56obsolete
aprisaXEForwardPowerLoAlarmsGroup
OBJECT-GROUP
The AprisaXE forward power low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.61obsolete
aprisaXEReversePowerHiAlarmsGroup
OBJECT-GROUP
The AprisaXE reverse power too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.66obsolete
aprisaXEReversePowerLoAlarmsGroup
OBJECT-GROUP
The AprisaXE reverse power too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.71obsolete
aprisaXETxPaTempAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter temperature too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.76obsolete
aprisaXETxPaTempWarnAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter temperature warning alarm group.
1.3.6.1.4.1.14817.7.3.1.1.81obsolete
aprisaXETxAgcHiAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter AGC too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.86obsolete
aprisaXETxAgcLoAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter AGC too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.91obsolete
aprisaXETxVtuneHiAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter VTUNE too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.96obsolete
aprisaXETxVtuneLoAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter VTUNE too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.101obsolete
aprisaXETx5VDigHiAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 5V digital voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.106obsolete
aprisaXETx5VDigLoAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 5V digital voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.111obsolete
aprisaXETx7VRfHiAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 7V RF voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.116obsolete
aprisaXETx7VRfLoAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 7V RF voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.121obsolete
aprisaXETx9VHiAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 9V voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.126obsolete
aprisaXETx9VLoAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 9V voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.131obsolete
aprisaXETx11VHiAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 11V voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.136obsolete
aprisaXETx11VLoAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 11V voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.141obsolete
aprisaXETx28VHiAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 28V voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.146obsolete
aprisaXETx28VLoAlarmsGroup
OBJECT-GROUP
The AprisaXE transmitter 28V voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.151obsolete
aprisaXEReturnLossHiAlarmsGroup
OBJECT-GROUP
The AprisaXE reverse power too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.152current
aprisaXETxSynthOutOfLockAlarmsGroup
OBJECT-GROUP
The AprisaXE TX Synth out of lock alarm group.
1.3.6.1.4.1.14817.7.3.1.1.153current
aprisaXERxSynthOutOfLockAlarmsGroup
OBJECT-GROUP
The AprisaXE Synth out of lock alarm group.
1.3.6.1.4.1.14817.7.3.1.1.161current
aprisaXERx12VAlarmsGroup
OBJECT-GROUP
The AprisaXE 12V supply alarm group.
1.3.6.1.4.1.14817.7.3.1.1.166current
aprisaXERx3V3HiAlarmsGroup
OBJECT-GROUP
The AprisaXE 3.3V supply high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.171obsolete
aprisaXERx3V3LoAlarmsGroup
OBJECT-GROUP
The AprisaXE 3.3V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.176obsolete
aprisaXERx5VHiAlarmsGroup
OBJECT-GROUP
The AprisaXE 5V supply High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.181obsolete
aprisaXERx5VLoAlarmsGroup
OBJECT-GROUP
The AprisaXE 5V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.186obsolete
aprisaXERx9VHiAlarmsGroup
OBJECT-GROUP
The AprisaXE 9V supply High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.191obsolete
aprisaXERx9VLoAlarmsGroup
OBJECT-GROUP
The AprisaXE 9V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.196obsolete
aprisaXERxNeg1V5HiAlarmsGroup
OBJECT-GROUP
The AprisaXE Neg 1.5V supply High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.201obsolete
aprisaXERxNeg1V5LoAlarmsGroup
OBJECT-GROUP
The AprisaXE Neg 1.5V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.206obsolete
aprisaXERxAgcHiAlarmsGroup
OBJECT-GROUP
The AprisaXE AGC high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.211obsolete
aprisaXERxAgcLoAlarmsGroup
OBJECT-GROUP
The AprisaXE AGC low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.216obsolete
aprisaXERxRssiHiAlarmsGroup
OBJECT-GROUP
The AprisaXE RSSI High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.221current
aprisaXERxRssiLoAlarmsGroup
OBJECT-GROUP
The AprisaXE RSSI low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.226current
aprisaXERxVtuneHiAlarmsGroup
OBJECT-GROUP
The AprisaXE Vtune High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.231obsolete
aprisaXERxVtuneLoAlarmsGroup
OBJECT-GROUP
The AprisaXE Vtune low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.236obsolete
aprisaXERxEEAlarmsGroup
OBJECT-GROUP
The AprisaXE EEPROM alarm group.
1.3.6.1.4.1.14817.7.3.1.1.241current
aprisaXETxADCChZeroHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Zero voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.250current
aprisaXETxADCChZeroLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Zero voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.251current
aprisaXETxADCChOneHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch One voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.252current
aprisaXETxADCChOneLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch One voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.253current
aprisaXETxADCChTwoHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Two voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.254current
aprisaXETxADCChTwoLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Two voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.255current
aprisaXETxADCChThreeHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Three voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.256current
aprisaXETxADCChThreeLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Three voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.257current
aprisaXETxADCChFourHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Four voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.258current
aprisaXETxADCChFourLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Four voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.259current
aprisaXETxADCChFiveHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Five voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.260current
aprisaXETxADCChFiveLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Five voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.261current
aprisaXETxADCChSixHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Six voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.262current
aprisaXETxADCChSixLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Six voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.263current
aprisaXETxADCChSevenHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Seven voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.264current
aprisaXETxADCChSevenLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Seven voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.265current
aprisaXETxADCChEightHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Eight voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.266current
aprisaXETxADCChEightLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Eight voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.267current
aprisaXETxADCChNineHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Nine voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.268current
aprisaXETxADCChNineLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Nine voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.269current
aprisaXETxADCChTenHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Ten voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.270current
aprisaXETxADCChTenLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Ten voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.271current
aprisaXETxADCChElevenHiAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Eleven voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.272current
aprisaXETxADCChElevenLoAlarmsGroup
OBJECT-GROUP
The aprisaXETx transmitter ADC Ch Eleven voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.273current
aprisaXERxADCChZeroHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Zero voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.275current
aprisaXERxADCChZeroLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Zero voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.276current
aprisaXERxADCChOneHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch One voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.277current
aprisaXERxADCChOneLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch One voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.278current
aprisaXERxADCChTwoHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Two voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.279current
aprisaXERxADCChTwoLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Two voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.280current
aprisaXERxADCChThreeHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Three voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.281current
aprisaXERxADCChThreeLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Three voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.282current
aprisaXERxADCChFourHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Four voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.283current
aprisaXERxADCChFourLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Four voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.284current
aprisaXERxADCChFiveHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Five voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.285current
aprisaXERxADCChFiveLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Five voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.286current
aprisaXERxADCChSixHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Six voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.287current
aprisaXERxADCChSixLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Six voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.288current
aprisaXERxADCChSevenHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Seven voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.289current
aprisaXERxADCChSevenLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Seven voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.290current
aprisaXERxADCChEightHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Eight voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.291current
aprisaXERxADCChEightLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Eight voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.292current
aprisaXERxADCChNineHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Nine voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.293current
aprisaXERxADCChNineLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Nine voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.294current
aprisaXERxADCChTenHiAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Ten voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.295current
aprisaXERxADCChTenLoAlarmsGroup
OBJECT-GROUP
The aprisaXERx receiver ADC Ch Ten voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.296current
aprisaXESoftwareUpgradeControlGroup
OBJECT-GROUP
The Aprisa XE software upgrade group.
1.3.6.1.4.1.14817.7.3.1.1.300current
aprisaXEHSDParameterCompareGroup
OBJECT-GROUP
The AprisaXE HSD Parameter Comparison group.
1.3.6.1.4.1.14817.7.3.1.1.305current