MIBs Depot

ALCATEL-IND1-SYSTEM-MIB

Registered at
1.3.6.1.4.1.6486.801.1.1.1.2.1
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2019-11-27 00:00, 2016-12-21 00:00, 2011-01-23 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-SYSTEM-MIB
Digest
sha256:039caf3b011bba375f1b3e7c20945a6ef0fd7274825ec64fe65c0c591449cd2f

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the OmniSwitch Product Line Proprietary System Subsystem. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEhardentIND1System
ALCATEL-IND1-VIRTUAL-CHASSIS-MIBVirtualOperChassisId, virtualChassisOperChasId
INET-ADDRESS-MIBInetAddress, InetAddressType
IPV6-TCIpv6Address
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

2 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-SYSTEM-MIB
ALCATEL-IND1-VIRTUAL-CHASSIS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IPV6-TC
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
AgeLimit
TEXTUAL-CONVENTION
Time Limit for switch log hash table entries
current
AppIdIndex
TEXTUAL-CONVENTION
a small positive integer used to index into tables arranged by Application ID's.
current
CommandPercentComplete
TEXTUAL-CONVENTION
An indication of percent complete for a command.
current
Enable
TEXTUAL-CONVENTION
an enumerated value used to indicate whether an entity is enabled(1), or disabled(2)
current
FileSystemIndex
TEXTUAL-CONVENTION
an enumerated value which provides an indication of the file system. The value is a small positive integer indicating the type of the file system
current
SeverityLevel
TEXTUAL-CONVENTION
an enumerated value which provides an indication of the severity level used for logging and debug purposes. The value is a small integer.
current
SwitchLoggingIndex
TEXTUAL-CONVENTION
a small positive integer used to identify switch logging outputs
current
SysLogFacilityId
TEXTUAL-CONVENTION
current
SystemFileType
TEXTUAL-CONVENTION
a small positive integer used to identify file types
current
VrfId
TEXTUAL-CONVENTION
Switch Log Vrf ID
current

Objects

NameOIDSyntaxAccessStatus
alcatelIND1SystemMIBObjects
OBJECT-IDENTITY
Branch For BOP Proprietary System Subsystem Managed Objects.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1current
systemMicrocode
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1
systemMicrocodePackageTable
OBJECT-TYPE
the microcode package table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1not-accessiblecurrent
systemMicrocodePackageEntry
OBJECT-TYPE
a row in the microcode package table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1not-accessiblecurrent
systemMicrocodePackageDirectoryIndex
OBJECT-TYPE
The package index for directories. Values 1-4 are pre-defined as: loaded(1), certified(2), working(3), issu(4). Values 5+ are user working directories in /flash assigned by the system. Values 5+ remain associated with a directory until reboot, takeover, the directory no longer contains valid images or the directory no longer exists.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.1Unsigned32not-accessiblecurrent
systemMicrocodePackageDirectory
OBJECT-TYPE
The directory name under flash where the microcode package is found. Directories with names longer than 108 characters will be skipped.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.2SnmpAdminString (SIZE(1..108))not-accessiblecurrent
systemMicrocodePackageIndex
OBJECT-TYPE
The index to the package sub table in the microcode table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.3Unsigned32not-accessiblecurrent
systemMicrocodePackageVersion
OBJECT-TYPE
The version of the microcode package (Fos.img, Fbase.img, etc.)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.4SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMicrocodePackageName
OBJECT-TYPE
The name of the microcode package
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.5SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMicrocodePackageDescription
OBJECT-TYPE
The description of the microcode package
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.6SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMicrocodePackageStatus
OBJECT-TYPE
The status of the microcode package
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.7INTEGER {undefined(1), ok(2), inuse(3)}read-onlycurrent
systemMicrocodePackageSize
OBJECT-TYPE
The size of the microcode package
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.8Unsigned32read-onlycurrent
systemMicrocodeLoadedTable
OBJECT-TYPE
the microcode package table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2not-accessiblecurrent
systemMicrocodeLoadedEntry
OBJECT-TYPE
a row in the microcode package table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1not-accessiblecurrent
systemMicrocodeLoadedIndex
OBJECT-TYPE
The index to the loaded package in microcode table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.1Unsigned32not-accessiblecurrent
systemMicrocodeLoadedDirectory
OBJECT-TYPE
The directory name under flash where the microcode package is found. Directories with names longer than 108 characters will be skipped.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.2SnmpAdminString (SIZE(1..108))read-onlycurrent
systemMicrocodeLoadedVersion
OBJECT-TYPE
The version of the microcode package (Fos.img, Fbase.img, etc.)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.3SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMicrocodeLoadedName
OBJECT-TYPE
The name of the microcode package
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.4SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMicrocodeLoadedDescription
OBJECT-TYPE
The description of the microcode package
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.5SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMicrocodeLoadedSize
OBJECT-TYPE
The size of the microcode package
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.6Unsigned32read-onlycurrent
systemBootParams
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2
systemBootNetwork
OBJECT-TYPE
this object is the base IP address of the EMP for this CMM
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.1IpAddressread-onlycurrent
systemBootNetworkGateway
OBJECT-TYPE
this object is the gateway of the EMP for this CMM
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.2IpAddressread-onlycurrent
systemBootNetworkNetmask
OBJECT-TYPE
This is the Netmask of the EMP that is used when this CMM boots.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.3IpAddressread-onlycurrent
systemHardware
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3
systemHardwareFlashMfg
OBJECT-TYPE
This object identifies the manufacturer of the Flash memory used on this product. toshiba(7) is for hawk only. The reason 7 is used is because 5 is already used for micron and 6 is for kingston. toshiba, sandisk, and sst are compact flashes for the hawk only.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.1INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), sandisk(8), sst(9), spansion(10), wintec(13), atp(14), ata(15), macronix(16), innodisk(17), memphis(18), smart(19), phison(20)}read-onlycurrent
systemHardwareFlashSize
OBJECT-TYPE
This object identifies the size of the flash memory available on this CMM. It is the total flash hardware memory and does not indicate how much of the memory is free, used, etc.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.2Unsigned32read-onlycurrent
systemHardwareMemoryMfg
OBJECT-TYPE
This object identifies the manufacturer of the RAM memory used on this CMM.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.3INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), agilent(8), dataram(10), interward(11), notreadable(12), wintec(13), atp(14)}read-onlycurrent
systemHardwareMemorySize
OBJECT-TYPE
This object identifies the size of the RAM memory available on this CMM. It is the total RAM hardware memory and does not indicate how much of the memory is free, used, etc.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.4Unsigned32read-onlycurrent
systemHardwareNVRAMBatteryLow
OBJECT-TYPE
This object identifies the whether the NVRAM battery is low. true(1), false(2)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.5TruthValueread-onlycurrent
systemHardwareBootCpuType
OBJECT-TYPE
Indicates the manufacturer and model number of the CPU. Currently, only two types of processors are enumerated.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.6INTEGER {other(1), sparc380(2), sparcV9(3), ppc(4), ppc8540(5), ppc8572(6), arm(7), intel(8)}read-onlycurrent
systemHardwareJumperInterruptBoot
OBJECT-TYPE
This object identifies whether the Interrupt Boot Jumper on this CMM is set: True(1), False(2)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.7TruthValueread-onlycurrent
systemHardwareJumperForceUartDefaults
OBJECT-TYPE
This object identifies whether the Force Uart Defaults Jumper on this CMM is set: True(1), False(2)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.8TruthValueread-onlycurrent
systemHardwareJumperRunExtendedMemoryDiagnostics
OBJECT-TYPE
This object identifies whether the Run Extended Memory Diagnostics Jumper on this CMM is set: True(1), False(2)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.9TruthValueread-onlycurrent
systemHardwareJumperSpare
OBJECT-TYPE
This object identifies whether the Spare Jumper on this CMM is set: True(1), False(2)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.10TruthValueread-onlycurrent
systemHardwareFpgaVersionTable
OBJECT-TYPE
This table contains the FPGA version for each FPGA on this CMM
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11not-accessiblecurrent
systemHardwareFpgaVersionEntry
OBJECT-TYPE
a row in the systemHardwareFpgaVersionTable
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1not-accessiblecurrent
systemHardwareFpgaVersionIndex
OBJECT-TYPE
This is the index to one of the FPGA versions on this CMM
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.1Integer32 (1..3)read-onlycurrent
systemHardwareFpgaVersion
OBJECT-TYPE
This is the major version of one of the FPGA devices on this CMM. refer to the systemHardwareMinorFpgaVersion for the minor number.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.2Unsigned32read-onlycurrent
systemHardwareFpgaManufacturer
OBJECT-TYPE
This object identifies the manufacturer of the FPGA devices on this CMM.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.3INTEGER {lattice(1), gowin(2)}read-onlycurrent
systemHardwareBootRomVersion
OBJECT-TYPE
A string that identifies the boot rom version
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.12SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareBackupMiniBootVersion
OBJECT-TYPE
A string that identifies the backup miniboot version.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.13SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareDefaultMiniBootVersion
OBJECT-TYPE
A string that identifies the default miniboot version.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.14SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareMinorFpgaVersion
OBJECT-TYPE
A string that identifies the minor FPGA version. Refer to the systemHardwareFpgaVersion for the major FPGA version number.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.15SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareCpldVersion
OBJECT-TYPE
A string that identifies the CPLD version.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.16SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareUbootVersion
OBJECT-TYPE
A string that identifies the Uboot version.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.17SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareProdRegId
OBJECT-TYPE
A string that identifies the product ID register
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.18SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareRevisionRegister
OBJECT-TYPE
A string that identifies the hardware revision register
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.19SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareXfpId
OBJECT-TYPE
A string that identifies the XFP ID
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.20SnmpAdminString (SIZE(0..255))read-onlycurrent
systemHardwareUbootMinibootVersion
OBJECT-TYPE
A string that identifies the Uboot-miniboot version.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.21SnmpAdminString (SIZE(0..255))read-onlycurrent
systemFileSystem
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4
systemFileSystemTable
OBJECT-TYPE
system file system table for this CMM.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1not-accessiblecurrent
systemFileSystemEntry
OBJECT-TYPE
A row in the system file system table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1not-accessiblecurrent
systemFileSystemIndex
OBJECT-TYPE
Index to a specific file system.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.1FileSystemIndexread-onlycurrent
systemFileSystemName
OBJECT-TYPE
The name of the file system.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.2SnmpAdminString (SIZE(0..255))read-onlycurrent
systemFileSystemFreeSpace
OBJECT-TYPE
the free space in octets of this file system
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.3Unsigned32read-onlycurrent
systemFileSystemDirectoryName
OBJECT-TYPE
The name of a file system directory. This object is used in conjunction with an Action command. The Action command will set this directory name to the name of a specific directory. Information for all of the files in that directory will then be read from the file system and the appropriate values written in the entries in the systemFileSystemFile table. All this is being done to give snmp access to the file system files.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.2SnmpAdminString (SIZE(0..255))read-writecurrent
systemFileSystemDirectoryDateTime
OBJECT-TYPE
the date and time (in system format) of the last access to this directory
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.3SnmpAdminString (SIZE(0..255))read-onlycurrent
systemFileSystemFileTable
OBJECT-TYPE
system file system File table for this CMM. This table is used by an Action command which will populate it with file information read from the files in the specified directory.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4not-accessiblecurrent
systemFileSystemFileEntry
OBJECT-TYPE
A row in the system file system File table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1not-accessiblecurrent
systemFileSystemFileIndex
OBJECT-TYPE
Index to a specific file system File.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.1Unsigned32read-onlycurrent
systemFileSystemFileName
OBJECT-TYPE
The name of a file system File
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.2SnmpAdminString (SIZE(0..255))read-onlycurrent
systemFileSystemFileType
OBJECT-TYPE
The Type of a file system File
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.3SystemFileTyperead-onlycurrent
systemFileSystemFileSize
OBJECT-TYPE
size of this file
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.4Unsigned32read-onlycurrent
systemFileSystemFileAttr
OBJECT-TYPE
attributes of this file
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.5INTEGER {undefined(1), readOnly(2), readWrite(3), writeOnly(4)}read-onlycurrent
systemFileSystemFileDateTime
OBJECT-TYPE
the modification date and time of a file
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.6SnmpAdminString (SIZE(0..255))read-onlycurrent
systemServices
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5
systemServicesDate
OBJECT-TYPE
This object contains the current System Date in the following format: MM/DD/YYYY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.1SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesTime
OBJECT-TYPE
This object contains the current System Time in the following format: HH:MM:SS
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.2SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesTimezone
OBJECT-TYPE
This object contains the current Hour Offset from UTC in the following format: -13:00 to +12:00 OR a well known timezone (PST,CST,etc.)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.3SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesTimezoneStartWeek
OBJECT-TYPE
first, second, third, fourth, fifth, last = 1,2,3,4,5,6
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.4Unsigned32read-writecurrent
systemServicesTimezoneStartDay
OBJECT-TYPE
Sunday, Monday, Tues... = 1,2,3,4,5,6,7
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.5Unsigned32read-writecurrent
systemServicesTimezoneStartMonth
OBJECT-TYPE
January, February, march... = 1,2,3,4,5,67,8,9,10,11,12
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.6Unsigned32read-writecurrent
systemServicesTimezoneStartTime
OBJECT-TYPE
2:00, 3:00, 4:00... = 200, 300, 400, etc.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.7Unsigned32read-writecurrent
systemServicesTimezoneOffset
OBJECT-TYPE
60 minutes = 60
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.8Unsigned32read-writecurrent
systemServicesTimezoneEndWeek
OBJECT-TYPE
first, second, third, fourth, fifth, last = 1,2,3,4,5,6
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.9Unsigned32read-writecurrent
systemServicesTimezoneEndDay
OBJECT-TYPE
Sunday, Monday, Tues... = 1,2,3,4,5,6,7
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.10Unsigned32read-writecurrent
systemServicesTimezoneEndMonth
OBJECT-TYPE
January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.11Unsigned32read-writecurrent
systemServicesTimezoneEndTime
OBJECT-TYPE
2:00, 3:00, 4:00... = 200, 300, 400, etc.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.12Unsigned32read-writecurrent
systemServicesEnableDST
OBJECT-TYPE
This object enables and disables the DST.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.13Enableread-writecurrent
systemServicesWorkingDirectory
OBJECT-TYPE
This object contains the current file system working directory for this CMM. For example, /flash/certified
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.14SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg1
OBJECT-TYPE
the 1st argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.15SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg2
OBJECT-TYPE
the 2nd argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.16SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg3
OBJECT-TYPE
the 3rd argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.17SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg4
OBJECT-TYPE
the 4th argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.18SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg5
OBJECT-TYPE
the 5th argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.19SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg6
OBJECT-TYPE
the 6th argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.20SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg7
OBJECT-TYPE
the 7th argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.21SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg8
OBJECT-TYPE
the 8th argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.22SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArg9
OBJECT-TYPE
the 9th argument for system services action routines
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.23SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesAction
OBJECT-TYPE
This object identifies which of the above Actions is to be performed by the System Services Application. Most Actions require one or more parameters be set before the Action is executed. systemServicesAction - 26 for bootrom, 27 for default miniboot, and 28 for backup miniboot use systemServicesArg1 for name of the file scp- the first 2 arguments are going to be used. Set arg 1 with the source and the arg 2 with the destination file(s). E.g. scp LocalDir/testfileX.txt admin@10.255.11.1:RemoteDir/testfileX.txt For mount and umount, systemServicesArg1 specifies the mount point (such as /uflash). For newfs, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be created. On /uflash, a FAT16 file system is created with long name naming conventions. For fsck, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be checked and systemServicesArg2 will contain the string repair or no-repair depending on if autocorrection is requested. To see all file systems currently mounted, refer to the systemFileSystemTable. For backup and restore, systemServicesArg1 contains the archive name and systemServicesArg2 through Arg9 contains the directories and/or files to be archived/extracted. For newfs, fsck, backup and restore, the systemServicesActionPercentComplete variable can be inspected to see a progress indication.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.24INTEGER {noaction(0), mkdir(1), rmdir(2), mv(3), rm(4), rmr(5), cp(6), cpr(7), chmodpw(8), chmodmw(9), fsck(10), ftp(11), rz(12), vi(13), telnet(14), install(15), ed(16), more(17), newfs(18), dshell(19), view(20), modbootparams(21), filedir(22), ssh(23), sftp(24), debugPmdNi(25), bootrom(26), defaultminiboot(27), backupminiboot(28), fpgacmm(29), ubootcmm(30), ubootni(31), scp(32), aclman(33), ubootMinibootAllSlots(34), miniboot(35), upgradeLicence(36), restoreLicence(37), updateDSineXtroller(38), ftp6(39), telnet6(40), ssh6(41), sftp6(42), mount(43), unmount(44), backup(45), restore(46), tftp(47), fscollect(48), fpgani(49), fsCollectForce(50), usb(51), usbAutoCopy(52), usbImgBackup(53)}read-writecurrent
systemServicesResultCode
OBJECT-TYPE
the result of a system services application
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.25Unsigned32read-onlycurrent
systemServicesResultString
OBJECT-TYPE
the string result of a system services application
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.26SnmpAdminString (SIZE(0..255))read-onlycurrent
systemServicesKtraceEnable
OBJECT-TYPE
enables/disables the Ktrace facility
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.27Enableread-writeobsolete
systemServicesSystraceEnable
OBJECT-TYPE
enables/disables the Systrace facility
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.28Enableread-writeobsolete
systemServicesTtyLines
OBJECT-TYPE
the number of tty lines for a console screen
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.29Unsigned32 (0..255)read-onlycurrent
systemServicesTtyColumns
OBJECT-TYPE
the number of tty columns for a console screen
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.30Unsigned32 (0..255)read-onlycurrent
systemServicesMemMonitorEnable
OBJECT-TYPE
disables/enables the kernel Memory Monitor feature
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.31Enableread-writecurrent
systemServicesKtraceLevelTable
OBJECT-TYPE
the table of Ktrace severity level settings
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32not-accessibleobsolete
systemServicesKtraceLevelEntry
OBJECT-TYPE
A row in the system services ktrace level table. There is one entry for each possible Application ID
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1not-accessibleobsolete
systemServicesKtraceLevelAppId
OBJECT-TYPE
the index into the ktrace level table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.1AppIdIndexread-onlyobsolete
systemServicesKtraceLevel
OBJECT-TYPE
the ktrace level for a specific Application ID
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.2SeverityLevelread-writeobsolete
systemServicesSystraceLevelTable
OBJECT-TYPE
the table of Systrace severity level settings
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33not-accessibleobsolete
systemServicesSystraceLevelEntry
OBJECT-TYPE
A row in the system services systrace level table. There is one entry for each possible Application ID
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1not-accessibleobsolete
systemServicesSystraceLevelAppId
OBJECT-TYPE
the Systrace level for a specific Application ID.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.1AppIdIndexread-onlyobsolete
systemServicesSystraceLevel
OBJECT-TYPE
the Systrace level for a specific Application ID.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.2SeverityLevelread-writeobsolete
systemUpdateStatusTable
OBJECT-TYPE
Provides update status for firmware updates
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34not-accessiblecurrent
systemUpdateStatusEntry
OBJECT-TYPE
A row in the update status table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1not-accessiblecurrent
systemUpdateIndex
OBJECT-TYPE
The index to the CMM for which status is required.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.1Integer32 (1..5972)not-accessiblecurrent
systemUpdateStatus
OBJECT-TYPE
Status of a firmware update. In the case of doneNok, further information can be obtained from systemUpdateErrorCode.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.2INTEGER {inProgress(1), doneOk(2), doneNok(3), noOp(4)}read-onlycurrent
systemUpdateErrorCode
OBJECT-TYPE
Error codes for done_nok.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.3INTEGER {msgSendIpcErr(1), fXferOPenErr(2), fXferFtpErr(3), fXferReadErr(4), fXferWriteErr(5), fXferReplyErr(6), fXferQuitErr(7), fXferFcloseErr(8), fileNameErr(9), rmFileErr(10), noInstallComp(11), notSysResource(12), notSupported(13), invalidValue(14), waitMsgMaxTry(15), installDrvErr(16), fileNotFound(17), notPrimary(18), commandBlocked(19), noError(20), invalidNi(21), niNotPresent(22), dupSerialNum(23), upToDate(24), invalidModType(25), maxFaiCount(26), invalidKey(27), niLocked(28)}read-onlycurrent
systemServicesActionPercentComplete
OBJECT-TYPE
This object identifies the percent completion of the currently executing systemServicesAction.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.35CommandPercentCompleteread-onlycurrent
systemServicesCurrentArchivePathName
OBJECT-TYPE
This object identifies the archive currently being read via the systemServicesArchiveTable. This object is the complete pathname to the archive and must be set prior to reading the systemServicesArchiveTable.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.36SnmpAdminString (SIZE(0..255))read-writecurrent
systemServicesArchiveTable
OBJECT-TYPE
This table contains the contents of a backup archive. This table is used by the restore action command to display (rather than backup) an archive. The restore command will populate this table with archive information read from the archive specified by the systemServicesAction restore command. This is done as follows. Set the systemServicesArg1 object to the archive name to be read. Set the systemServicesArg2 object to the string: display-only. Set the systemServicesAction object to restore. Then read this table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37not-accessiblecurrent
systemServicesArchiveEntry
OBJECT-TYPE
A row in the system services archive table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1not-accessiblecurrent
systemServicesArchiveIndex
OBJECT-TYPE
Index to a specific entry in the backup archive file.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.1Unsigned32read-onlycurrent
systemServicesArchiveName
OBJECT-TYPE
The name of a file in the backup archive file.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.2SnmpAdminString (SIZE(0..255))read-onlycurrent
systemServicesArchiveType
OBJECT-TYPE
The type of a file in the backup archive file.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.3SystemFileTyperead-onlycurrent
systemServicesArchiveSize
OBJECT-TYPE
The size of a file in the backup archive file.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.4Unsigned32read-onlycurrent
systemServicesArchiveAttr
OBJECT-TYPE
The attributes of a file in the backup archive file.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.5INTEGER {undefined(1), readOnly(2), readWrite(3), writeOnly(4)}read-onlycurrent
systemServicesUsbEnable
OBJECT-TYPE
disable/enable the USB interface with mode as synchronous / asynchronous
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.38INTEGER {enableasync(1), disable(2), enablesync(3)}read-writecurrent
systemServicesUsbAutoCopyEnable
OBJECT-TYPE
disable/enable the USB auto-copy facility
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.39Enableread-writecurrent
systemServicesUsbMounted
OBJECT-TYPE
determinse if usb is mounted
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.40Enableread-onlycurrent
systemServicesTcpHalfOpenTimeout
OBJECT-TYPE
The timeout value in seconds for tcp half-open connections. Current suppored values are 3, 7, 15, 31 and 63(default)
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.41Integer32 (3..63)read-writecurrent
systemServicesUsbBackupAdminState
OBJECT-TYPE
This object enables and disables usb backup admin-state .
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.42Enableread-writecurrent
systemServicesUsbCopyConfig
OBJECT-TYPE
This object enables and disables usb copy-config .
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.43Enableread-writecurrent
systemServicesUsbBackupKey
OBJECT-TYPE
The key entered by the user which will be used for encrypting files that will be backed up to USB.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.44SnmpAdminString (SIZE(0..32))read-writecurrent
systemServicesUsbBackupHashkey
OBJECT-TYPE
The encrypted key entered by the user which will be used for encrypted files that will be backed up to USB.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.45SnmpAdminString (SIZE(0..32))read-writecurrent
systemServicesTCPTimeStampResponse
OBJECT-TYPE
Enable/disable TCP time-stamp-response.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.46Enableread-writecurrent
systemServicesUsbBackupBootable
OBJECT-TYPE
Enable/Disable enhanced USB backup for bootable USB drive
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.47Enableread-writecurrent
systemSwitchLogging
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6
systemSwitchLoggingIndex
OBJECT-TYPE
A small positive integer used to identify a switch logging output
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.1SwitchLoggingIndexread-onlycurrent
systemSwitchLoggingEnable
OBJECT-TYPE
Global switch logging enable/disable
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.2Enableread-writecurrent
systemSwitchLoggingFlash
OBJECT-TYPE
Enable/disable switch logging to flash
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.3Enableread-writecurrent
systemSwitchLoggingSocket
OBJECT-TYPE
Enable/disable switch logging to a socket
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.4Enableread-writecurrent
systemSwitchLoggingSocketIpAddr
OBJECT-TYPE
The IP Address of a remote host that can be used to send switch logging records to as an option
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.5IpAddressread-writedeprecated
systemSwitchLoggingConsole
OBJECT-TYPE
Enable/disable switch logging to the console
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.6Enableread-writecurrent
systemSwitchLoggingApplicationTable
OBJECT-TYPE
The table of switch logging registered applications,one for each Application ID
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7not-accessiblecurrent
systemSwitchLoggingLevelEntry
OBJECT-TYPE
A row in the system switch logging application table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1not-accessiblecurrent
systemSwitchLoggingApplicationAppId
OBJECT-TYPE
A specific application ID which has a registered application associated with it. This application ID is used as an index into the application table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.1AppIdIndexread-onlycurrent
systemSwitchLoggingApplicationSubAppId
OBJECT-TYPE
A specific sub-application ID which belongs to a registered application associated with it. This sub-application ID is used as part of the index into the application table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.2AppIdIndexread-onlycurrent
systemSwitchLoggingApplicationSubAppVrfLevelIndex
OBJECT-TYPE
The specific sub-application's VRF severity level. This severity level is used as part of the index into the application table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.3Integer32 (0..9)read-onlycurrent
systemSwitchLoggingApplicationAppName
OBJECT-TYPE
Application name in an entry in the table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.4SnmpAdminString (SIZE(0..255))read-onlycurrent
systemSwitchLoggingApplicationSubAppName
OBJECT-TYPE
The name of the specific sub-application ID.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.5SnmpAdminString (SIZE(0..255))read-onlycurrent
systemSwitchLoggingApplicationSubAppLevel
OBJECT-TYPE
The severity level of the specific sub-application ID.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.6SeverityLevelread-onlycurrent
systemSwitchLoggingApplicationSubAppVrfLevelString
OBJECT-TYPE
A string with comma-delimited VRF IDs or ranges of VRF IDs that belong to this sub-application's VRF severity level.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.7SnmpAdminString (SIZE(0..255))read-onlycurrent
systemSwitchLoggingClear
OBJECT-TYPE
Enable clearing of switch logging entries
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.8Unsigned32read-writecurrent
systemSwitchLoggingFileSize
OBJECT-TYPE
Set size of swlog logging file
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.9Unsigned32read-writecurrent
systemSwitchLoggingHostTable
OBJECT-TYPE
The table of switch logging remote hosts.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10not-accessiblecurrent
systemSwitchLoggingHostEntry
OBJECT-TYPE
A remote switch logging server entry.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1not-accessiblecurrent
systemSwitchLoggingHostIpAddr
OBJECT-TYPE
The IP Address of a remote host that can be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.1IpAddressread-onlycurrent
systemSwitchLoggingHostPort
OBJECT-TYPE
The port number of a remote host that can be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.2Integer32 (1..65535)read-createcurrent
systemSwitchLoggingHostStatus
OBJECT-TYPE
Provides the ability to add or remove a remote host entry.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.3RowStatusread-createcurrent
systemSwitchLoggingHostUserCommandHost
OBJECT-TYPE
Indicates whether this host may receive user command data.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.4Enableread-createcurrent
systemSwitchLoggingHostVrfName
OBJECT-TYPE
The name or number of the VRF to be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.5SnmpAdminString (SIZE(0..32))read-createcurrent
systemSwitchLoggingHostTls
OBJECT-TYPE
This object is used to enable syslog over TLS.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.6INTEGER {enabled(1), disabled(2)}read-createcurrent
systemSwitchLoggingHostv6Table
OBJECT-TYPE
The table of switch logging remote hosts.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11not-accessiblecurrent
systemSwitchLoggingHostv6Entry
OBJECT-TYPE
A remote switch logging server entry.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1not-accessiblecurrent
systemSwitchLoggingHostv6IpAddr
OBJECT-TYPE
The IP Address of a remote host that can be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.1Ipv6Addressread-onlycurrent
systemSwitchLoggingHostv6Port
OBJECT-TYPE
The port number of a remote host that can be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.2Integer32 (1..65535)read-createcurrent
systemSwitchLoggingHostv6Status
OBJECT-TYPE
Provides the ability to add or remove a remote host entry.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.3RowStatusread-createcurrent
systemSwitchLoggingHostv6UserCommandHost
OBJECT-TYPE
Indicates whether this host may receive user command data.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.4Enableread-createcurrent
systemSwitchLoggingHostv6VrfName
OBJECT-TYPE
The name or number of the VRF to be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.5SnmpAdminString (SIZE(0..32))read-createcurrent
systemSwitchLoggingHostv6Tls
OBJECT-TYPE
This object is used to enable syslog over TLS.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.6INTEGER {enabled(1), disabled(2)}read-createcurrent
systemSwitchLoggingHostCount
OBJECT-TYPE
The number of remote hosts currently defined.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.12Integer32 (0..4)read-onlycurrent
systemSwitchLoggingConsoleLevel
OBJECT-TYPE
Messages whose severity level is equal to or more severe than this value will be displayed to the console.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.13SeverityLevelread-createcurrent
systemSwitchLoggingUserCommandStatus
OBJECT-TYPE
User commands will be logged to remote hosts when enabled.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.14Enableread-createcurrent
systemSwitchLoggingSysLogFacilityId
OBJECT-TYPE
This textual convention enumerates the facilities that originate syslog messages. The Facilities of syslog messages are numerically coded with decimal values. Some of the operating system daemons and processes are traditionally designated by the Facility values given below. Daemons and processes that do not have an explicitly assigned Facility may use any of the 'local use' Facilities or they may use the 'user-level' Facility. For interoperability and backwards compatibility reasons, mapping specified in this document between a label which represents a Facility and the value which represents the corresponding code, is normative. So the mapping from a label configured by operators in syslog.conf or equivalent will consistently map to the same Facility code regardless of implementation, but the label itself is often semantically meaningless, because it is impractical to attempt to enumerate all possible facilities, and the enumeration (label and corresponding value) that is used by an actual Facility is, and has historically been, implementation-dependent. For example, the foobar application might log messages as having come from local7, even though there is no 'local' process on the device, and the operator can configure syslog.conf to have local7.critical messages be relayed, even though there might be multiple facilities using Facility local7. This is typical current practice, and originators, relays and collectors know how to handle this situation. For improved accuracy, the foobar application can also include an APPNAME Structured Data Element.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.15SysLogFacilityIdread-writecurrent
systemSwitchLoggingLevel
OBJECT-TYPE
The logging level for a specific application id.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.16SeverityLevelread-writecurrent
systemSwitchLoggingAppName
OBJECT-TYPE
Application name used as an index into the table
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.17SnmpAdminString (SIZE(0..255))read-writecurrent
systemSwitchLoggingDuplicateDetect
OBJECT-TYPE
Global switch logging enable/disable duplicate detection
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.18Enableread-writecurrent
systemSwitchLoggingPreamble
OBJECT-TYPE
Global switch logging enable/disable printing preamble
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.19Enableread-writecurrent
systemSwitchLoggingDebug
OBJECT-TYPE
Global switch logging enable/disable debug information
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.20Enableread-writecurrent
systemSwitchLoggingVrf
OBJECT-TYPE
Global switch logging subapplicastion VRF ID
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.21VrfIdread-writecurrent
systemSwitchLoggingHashAgeLimit
OBJECT-TYPE
Global switch logging Hash Table Age Limit
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.22AgeLimitread-writecurrent
systemSwitchLoggingTty
OBJECT-TYPE
Enable/disable switch logging to tty
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.23Enableread-writecurrent
systemSwitchLoggingSubAppNbr
OBJECT-TYPE
The subapplication number of a given application
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.24AppIdIndexread-writecurrent
systemSwitchLoggingLibraryName
OBJECT-TYPE
Library name used as an index into the table of registered libraries
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.25SnmpAdminString (SIZE(0..255))read-writecurrent
systemSwitchLoggingLoopback0
OBJECT-TYPE
Enable/disable switch logging using Loopback0 interface as the source ip address when logging to syslog server
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.26Enableread-writecurrent
systemSwitchLoggingDgHostTable
OBJECT-TYPE
The table of switch logging remote hosts for Dying Gasp.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27not-accessiblecurrent
systemSwitchLoggingDgHostEntry
OBJECT-TYPE
A remote switch logging server entry.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1not-accessiblecurrent
systemSwitchLoggingDgHostIndex
OBJECT-TYPE
Index of Dying Gasp swlod table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1.1Integer32 (1..3)not-accessiblecurrent
systemSwitchLoggingDgHostIpType
OBJECT-TYPE
The IP address type .
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1.2InetAddressTyperead-onlycurrent
systemSwitchLoggingDgHostIpAddr
OBJECT-TYPE
The IP Address of a remote host that can be used to send Dying Gasp switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1.3InetAddressread-onlycurrent
systemSwitchLoggingGmtTime
OBJECT-TYPE
Enable/disable switch logging in GMT time when logging to syslog server
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.28Enableread-writedeprecated
systemSwitchLoggingSyslogProtocol
OBJECT-TYPE
Enable/disable switch logging in syslog-protocol RFC5424 format when logging to file or syslog server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.29Enableread-writecurrent
systemSwitchLoggingSizeTrapThreshold
OBJECT-TYPE
when the swlog file size reaches this threshold, the trap 'systemSwlogSizeTrap' will be generated.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.30Integer32 (50..90)read-writecurrent
systemSwitchLoggingHostDnTable
OBJECT-TYPE
The table of switch logging remote hosts.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31not-accessiblecurrent
systemSwitchLoggingHostDnEntry
OBJECT-TYPE
A remote switch logging server domain name entry. The MAX size available for systemSwitchLoggingHostDnName is 127 because the table index cannot exceed MAX 128 dotted values.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1not-accessiblecurrent
systemSwitchLoggingHostDnName
OBJECT-TYPE
The domain name of a remote host that can be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.1SnmpAdminString (SIZE(1..128))not-accessiblecurrent
systemSwitchLoggingHostDnPort
OBJECT-TYPE
The port number of a remote host that can be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.2Integer32 (1..65535)read-createcurrent
systemSwitchLoggingHostDnUserCommandHost
OBJECT-TYPE
Indicates whether this host may receive user command data.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.3Enableread-createcurrent
systemSwitchLoggingHostDnVrfName
OBJECT-TYPE
The name or number of the VRF to be used to send switch logging records to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.4SnmpAdminString (SIZE(0..32))read-createcurrent
systemSwitchLoggingHostDnStatus
OBJECT-TYPE
Provides the ability to add or remove a remote host entry.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.5RowStatusread-createcurrent
systemSwitchLoggingHostDnTls
OBJECT-TYPE
This object is used to enable syslog over TLS.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.6INTEGER {enabled(1), disabled(2)}read-createcurrent
systemSwitchLoggingHostOutputSocket
OBJECT-TYPE
Enable/disable host logging to external syslog server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.32Enableread-writecurrent
systemSwitchLoggingNiOutputSocketTable
OBJECT-TYPE
The table of NI output socket
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33not-accessiblecurrent
systemSwitchLoggingNiOutputSocketEntry
OBJECT-TYPE
A row in the NI output socket table.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1not-accessiblecurrent
systemSwitchLoggingNiOutputSocketChassisId
OBJECT-TYPE
The chassis ID for NI output socket.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1.1Unsigned32not-accessiblecurrent
systemSwitchLoggingNiOutputSocketSlot
OBJECT-TYPE
The slot ID for NI output socket.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1.2Unsigned32not-accessiblecurrent
systemSwitchLoggingNiOutputSocket
OBJECT-TYPE
Enable/disable NI logging to external syslog server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1.3Enableread-writecurrent
systemSwitchLoggingOutputSocketConsole
OBJECT-TYPE
Enable/disable send console log to remote Syslog server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.34Enableread-writecurrent
systemSwitchLoggingDefaultLevel
OBJECT-TYPE
Switch logging default level.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.35SeverityLevel {severityLevelAlarm(1), severityLevelError(2), severityLevelAlert(3), severityLevelWarn(4), severityLevelEvent(5), severityLevelInfo(6)}read-writecurrent
systemDNS
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7
systemDNSEnableDnsResolver
OBJECT-TYPE
Global Domain Name Service enable/disable
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.1Enableread-createcurrent
systemDNSDomainName
OBJECT-TYPE
current domain name used by the Domain Name Service
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.2SnmpAdminString (SIZE(0..255))read-createcurrent
systemDNSNsAddr1
OBJECT-TYPE
1st part of address used by the Domain Name Service
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.3IpAddressread-createcurrent
systemDNSNsAddr2
OBJECT-TYPE
2nd part of address used by the Domain Name Service
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.4IpAddressread-createcurrent
systemDNSNsAddr3
OBJECT-TYPE
3rd part of address used by the Domain Name Service
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.5IpAddressread-createcurrent
systemDNSNsIPv6Addr1
OBJECT-TYPE
IPv6 address of the Primary DNS server
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.6Ipv6Addressread-createcurrent
systemDNSNsIPv6Addr2
OBJECT-TYPE
IPv6 address of the Secondary DNS server
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.7Ipv6Addressread-createcurrent
systemDNSNsIPv6Addr3
OBJECT-TYPE
IPv6 address of the third DNS server
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.8Ipv6Addressread-createcurrent
systemBlueToothServices
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8
systemServicesBluetoothEnable
OBJECT-TYPE
Enable or disable Bluetooth.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.1Enableread-writecurrent
systemServicesBluetoothTxPower
OBJECT-TYPE
The Bluetooth transmit power, low or high.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.2INTEGER {low(1), high(2)}read-writecurrent
systemServicesBluetoothTable
OBJECT-TYPE
The table of Bluetooth devices.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3not-accessiblecurrent
systemServicesBluetoothEntry
OBJECT-TYPE
A Bluetooth device entry.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3.1not-accessiblecurrent
systemServicesBluetoothChassisId
OBJECT-TYPE
The chassis ID for this Bluetooth instance.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3.1.1VirtualOperChassisIdnot-accessiblecurrent
systemServicesBluetoothStatus
OBJECT-TYPE
The current Bluetooth status.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3.1.2INTEGER {notPresent(1), connectionInactive(2), connectionActive(3)}read-onlycurrent
systemFips
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.9
systemFipsAdminState
OBJECT-TYPE
Enable or disable the FIPS mode on AOS switches. This value becomes the systemFipsOperState after write-memory and reboot.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.9.1Enableread-writecurrent
systemFipsOperState
OBJECT-TYPE
The Operational State of the FIPS mode on AOS switches
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.9.2Enableread-onlycurrent
systemVcHardware
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10
systemVcHardwareTable
OBJECT-TYPE
The table lists the results of cable diagnostics.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1not-accessiblecurrent
systemVcHardwareEntry
OBJECT-TYPE
An entry corresponding to each port.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1not-accessiblecurrent
systemVcHardwareCpuVendor
OBJECT-TYPE
A string that identifies the CPU Vendor for this chassis in the VC.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.1SnmpAdminString (SIZE(0..255))read-onlycurrent
systemVcHardwareCpuModel
OBJECT-TYPE
A string that identifies the CPU Model for this chassis in the VC.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.2SnmpAdminString (SIZE(0..255))read-onlycurrent
systemVcHardwareFlashMfg
OBJECT-TYPE
This object identifies the manufacturer of the Flash memory used on this chassis in the VC.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.3INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), sandisk(8), sst(9), spansion(10), wintec(13), atp(14), ata(15), macronix(16), innodisk(17), memphis(18), smart(19)}read-onlycurrent
systemVcHardwareFlashSize
OBJECT-TYPE
This object identifies the size of the flash memory available on this chassis in the VC.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.4Counter64read-onlycurrent
systemVcHardwareMemoryMfg
OBJECT-TYPE
This object identifies the manufacturer of the RAM memory used on this chassis in the VC
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.5INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), agilent(8), dataram(10), interward(11), notreadable(12)}read-onlycurrent
systemVcHardwareMemorySize
OBJECT-TYPE
This object identifies the size of the RAM memory available on this chassis in the VC
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.6Counter64read-onlycurrent
systemVcHardwareUbootVersion
OBJECT-TYPE
A string that identifies the Uboot version for this chassis in the VC.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.7SnmpAdminString (SIZE(0..255))read-onlycurrent
systemVcHardwareFpga1Version
OBJECT-TYPE
This is the version of one of the FPGA #1 this CMM in the VC.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.8SnmpAdminString (SIZE(0..255))read-onlycurrent
systemVcHardwareFpga2Version
OBJECT-TYPE
This is the version of one of the FPGA #2 this CMM in the VC. If this FPGA does not exist then this will be N/A
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.9SnmpAdminString (SIZE(0..255))read-onlycurrent
systemVcHardwarePowerSuppliesPresent
OBJECT-TYPE
A List of the Power supplies that are Present
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.10Bits {ps1(0), ps2(1), ps3(2), ps4(3), ps5(4), ps6(5), ps7(6), ps8(7), ps9(8), ps10(9), ps11(10), ps12(11), ps13(12), ps14(13), ps15(14), ps16(15)}read-onlycurrent
systemVcHardwareNisPresent
OBJECT-TYPE
A List of the NI's/Expansion modules Present
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.11Bits {ni1(0), ni2(1), ni3(2), ni4(3), ni5(4), ni6(5), ni7(6), ni8(7), ni9(8), ni10(9), ni11(10), ni12(11), ni13(12), ni14(13), ni15(14), ni16(15)}read-onlycurrent
systemVcHardwareCFMsPresent
OBJECT-TYPE
A List of the CFM's that are Present
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.12Bits {cfm1(0), cfm2(1), cfm3(2), cfm4(3), cfm5(4), cfm6(5), cfm7(6), cfm8(7)}read-onlycurrent
systemVcHardwareFanTraysPresent
OBJECT-TYPE
A List of the Fan Trays Present
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.13Bits {fanTray1(0), fanTray2(1), fanTray3(2), fanTray4(3), fanTray5(4), fanTray6(5), fanTray7(6), fanTray8(7)}read-onlycurrent
ovCloudAgent
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11
ovCloudAgentAdminState
OBJECT-TYPE
Enable or disable the cloud agent on AOS switches.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.1INTEGER {enabled(1), disabled(2), forceDisabled(3), restart(4)}read-writecurrent
ovCloudAgentDiscoveryInterval
OBJECT-TYPE
Time interval in minutes the switch does call-home in case of the previous call-home failed.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.2Unsigned32 (2..43200)read-writecurrent
ovCloudAgentDeviceState
OBJECT-TYPE
The AOS switch OV cloud agent state.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.3INTEGER {initial(1), callhomeSent(2), upgradeInProgress(3), upgradeInProgressRetry(4), vpnConnectInProgress(5), deviceNotManaged(6), preProvisionInProgress(7), preProvisionFailed(8), deviceManaged(9), error(10), pkiUpdate(11), troubleshooting(12)}read-onlycurrent
ovCloudAgentVpnStatus
OBJECT-TYPE
The AOS switch OV cloud agent VPN connection status.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.4INTEGER {connected(1), disconnected(2)}read-onlycurrent
ovCloudAgentTimeToNextCallhome
OBJECT-TYPE
Time in second to the next callhome in case the previous callhome is failed. Zero (0) value means it is not applicable.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.5Unsigned32read-onlycurrent
ovCloudAgentRemoveInconsistentCertificate
OBJECT-TYPE
Remove the certificates from all chassis if the certificate status is inconsistent.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.6Unsigned32read-writecurrent
systemStorage
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.12
systemStorageLock
OBJECT-TYPE
The storage system status. By default, the storage system is un-locked.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.12.1INTEGER {lock(1), unlock(2)}read-writecurrent
systemStorageExtractOperStatus
OBJECT-TYPE
This object denotes the status of the last extraction operation.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.12.2INTEGER {inProgress(1), failed(2), success(3)}read-onlycurrent
systemStorageLockSftpServer
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13
systemStorageLockSftpServerInetAddrType
OBJECT-TYPE
The value of systemStorageLockSftpServerInetAddrType indicates the inet address type for systemStorageLockSftpServerInetAddr.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.1InetAddressType {ipv4(1), ipv6(2)}read-writecurrent
systemStorageLockSftpServerInetAddr
OBJECT-TYPE
IP address of the sftp server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.2InetAddress (SIZE(1..128))read-writecurrent
systemStorageLockSftpServerUser
OBJECT-TYPE
Name of the user.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.3SnmpAdminString (SIZE(0..63))read-writecurrent
systemStorageLockSftpServerPass
OBJECT-TYPE
Password of the user.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.4SnmpAdminString (SIZE(0..47))read-writecurrent
systemStorageLockSftpServerPassHash
OBJECT-TYPE
Password hash of the user.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.5SnmpAdminString (SIZE(0..96))read-writecurrent
systemStorageLockSftpServerPort
OBJECT-TYPE
Port of the sftp server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.6Integer32 (0..65535)read-writecurrent
systemStorageLockOutputFile
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14
systemStorageLockOutputFileName
OBJECT-TYPE
Name of the output file.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.1SnmpAdminString (SIZE(1..128))read-writecurrent
systemStorageLockOutputFileChassisId
OBJECT-TYPE
The storage lock chassis id.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.2Integer32 (1..8)read-writecurrent
systemStorageLockOutputFileType
OBJECT-TYPE
The storage lock type.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.3INTEGER {flash(1), bootFlash(2), eeprom(3), all(4)}read-writecurrent
systemStorageLockOutputFileAdminPass
OBJECT-TYPE
Password of the admin user.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.4SnmpAdminString (SIZE(0..47))read-writecurrent
systemSslCipher
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.15
systemSslCipherLevel
OBJECT-TYPE
The strength of the cipher and indicates the minimum level of ciphers that are supported. all-Includes all ciphers, including NULL-SHA. low-Includes all ciphers except NULL-SHA. medium-Includes all ciphers except NULL-SHA, DES-CBC-SHA, and RC4-MD5. high (applies only to TLSv1.2)-Includes only AES-256 with SHA-2 ciphers. custom-The cipher suite using OpenSSL cipher definition strings. customFile-The cipher suite using OpenSSL cipher definition strings that are stored in the specified file.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.15.1INTEGER {all(1), low(2), medium(3), high(4), custom(5), customFile(6)}read-writecurrent
systemSslCipherSuite
OBJECT-TYPE
Full control of the cipher suite using OpenSSL cipher definition strings.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.15.2SnmpAdminString (SIZE(0..1024))read-writecurrent
systemMgmtAgent
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16
systemMgmtAgentAdminState
OBJECT-TYPE
Enable or disable the MGMT agent on AOS switches.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.1INTEGER {enable(1), disable(2)}read-writecurrent
systemMgmtAgentBrokerConfHostType
OBJECT-TYPE
Type of broker. It should be DNS, IPv4 and IPv6.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.2InetAddressType {ipv4(1), ipv6(2), dns(16)}read-writecurrent
systemMgmtAgentBrokerConfHost
OBJECT-TYPE
Specify the broker host to connect to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.3InetAddressread-writecurrent
systemMgmtAgentBrokerConfPort
OBJECT-TYPE
Connect to the port specified. If not given, the default of 1883 for plain MQTT or 8883 for MQTT over TLS will be used.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.4Integer32 (1..65535)read-writecurrent
systemMgmtAgentBrokerConfUserName
OBJECT-TYPE
Provide a username to be used for authenticating with the broker.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.5SnmpAdminString (SIZE(0..255))read-writecurrent
systemMgmtAgentBrokerConfPassword
OBJECT-TYPE
Provide a password to be used for authenticating with the broker.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.6SnmpAdminString (SIZE(0..255))read-writecurrent
systemMgmtAgentBrokerConfQoS
OBJECT-TYPE
Specify the quality of service to use for the message, from 0, 1 and 2.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.7INTEGER {qos0(1), qos1(2), qos2(3)}read-writecurrent
systemMgmtAgentBrokerConfKeepAlive
OBJECT-TYPE
The number of seconds between sending PING commands to the broker for the purposes of informing it we are still connected and functioning.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.8Integer32read-writecurrent
systemMgmtAgentBrokerConfCleanSession
OBJECT-TYPE
Enable or disable the clean session flag.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.9TruthValueread-writecurrent
systemMgmtAgentBrokerConfProxy
OBJECT-TYPE
Specify a SOCKS5 proxy to connect through.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.10SnmpAdminStringread-writecurrent
systemMgmtAgentBrokerConfInsecure
OBJECT-TYPE
When using certificate based encryption, this option disables verification of the server hostname in the server certificate.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.11TruthValueread-writecurrent
systemMgmtAgentBrokerOperHostType
OBJECT-TYPE
Type of broker. It should be DNS, IPv4 and IPv6.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.12InetAddressType {ipv4(1), ipv6(2), dns(16)}read-onlycurrent
systemMgmtAgentBrokerOperHost
OBJECT-TYPE
Specify the broker host to connect to.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.13InetAddressread-onlycurrent
systemMgmtAgentBrokerOperPort
OBJECT-TYPE
Connect to the port specified. If not given, the default of 1883 for plain MQTT or 8883 for MQTT over TLS will be used.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.14Integer32 (1..65535)read-onlycurrent
systemMgmtAgentBrokerOperUserName
OBJECT-TYPE
Provide a username to be used for authenticating with the broker.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.15SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMgmtAgentBrokerOperPassword
OBJECT-TYPE
Provide a password to be used for authenticating with the broker.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.16SnmpAdminString (SIZE(0..255))read-onlycurrent
systemMgmtAgentBrokerOperQoS
OBJECT-TYPE
Specify the quality of service to use for the message, from 0, 1 and 2.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.17INTEGER {qos0(1), qos1(2), qos2(3)}read-onlycurrent
systemMgmtAgentBrokerOperKeepAlive
OBJECT-TYPE
The number of seconds between sending PING commands to the broker for the purposes of informing it we are still connected and functioning.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.18Integer32read-onlycurrent
systemMgmtAgentBrokerOperCleanSession
OBJECT-TYPE
Enable or disable the clean session flag.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.19TruthValueread-onlycurrent
systemMgmtAgentBrokerOperProxy
OBJECT-TYPE
Specify a SOCKS5 proxy to connect through.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.20SnmpAdminStringread-onlycurrent
systemMgmtAgentBrokerOperInsecure
OBJECT-TYPE
When using certificate based encryption, this option disables verification of the server hostname in the server certificate.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.21TruthValueread-onlycurrent
systemSslPki
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17
systemSslPkiClientCertificateValidation
OBJECT-TYPE
This object is used for enabling/disabling the SSL certificate validation for AOS TLS clients ( LDAP, RADIUS, SYSLOG, SNMP ).
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.1INTEGER {enable(1), disable(2)}read-writecurrent
systemSslPkiClientMutualAuthentication
OBJECT-TYPE
This object is used for enabling/disabling the SSL mutual authentication for AOS TLS clients ( LDAP, RADIUS, SYSLOG, SNMP ).
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.2INTEGER {enable(1), disable(2)}read-writecurrent
systemSslPkiServerMutualAuthentication
OBJECT-TYPE
This object is used for enabling/disabling the SSL mutual authentication for AOS TLS servers ( Captive-Portal, SNMP ).
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.3INTEGER {enable(1), disable(2)}read-writecurrent
systemSslPkiTlsVersion
OBJECT-TYPE
This object is used for selecting the TLS version for AOS TLS.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.4INTEGER {versionOneDotZero(1), versionOneDotOne(2), versionOneDotTwo(3)}read-writecurrent
systemSslPkiCheckRevocation
OBJECT-TYPE
This object is used to set the TLS certificate revocation check method.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.5INTEGER {disable(1), crl(2), ocsp(3)}read-writecurrent
systemPythonPip
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.18
systemPythonPipInstall
OBJECT-TYPE
A set with value 1 on this object will install python pip module to the switch. A set with value 2 on this object will uninstall python pip module but a reboot is required.
1.3.6.1.4.1.6486.801.1.1.1.2.1.1.18.1INTEGER {install(1), uninstall(2)}read-writecurrent
alcatelIND1SystemMIBConformance
OBJECT-IDENTITY
Branch For Alcatel IND BOP Proprietary System Subsystem Conformance Information.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2current
alcatelIND1SystemMIBGroups
OBJECT-IDENTITY
Branch For Alcatel IND BOP Proprietary System Subsystem Units Of Conformance.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1current
alcatelIND1SystemMIBCompliances
OBJECT-IDENTITY
Branch For Alcatel IND BOP Proprietary System Subsystem Compliance Statements.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.2current
alcatelIND1SystemMIBTrapObjects
OBJECT-IDENTITY
Branch For Alcatel IND BOP Proprietary System Subsystem Trap Objects.
1.3.6.1.4.1.6486.801.1.1.1.2.1.3current
systemSwlogName
OBJECT-TYPE
SWLOG file name that might get overwritten since swlog file reached (90%) it size
1.3.6.1.4.1.6486.801.1.1.1.2.1.3.1SnmpAdminString (SIZE(0..255))read-onlycurrent
systemSwlogFailure
OBJECT-TYPE
SWLOG to /flash/swlog_chasis* file may fail due to the switch runs out of file descriptor or hard disk space. This trap will also be raised during failure sending the swlog to external syslog server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.3.2SnmpAdminString (SIZE(0..255))read-onlycurrent
systemRebootReason
OBJECT-TYPE
This object indicates the system reboot reason. If this object value is swlogFailure(1) that means system reboot due to remote logging failure. If this object value is loggingServiceNotRunning(2) that means system reboot because syslogd/swlogd is not running.
1.3.6.1.4.1.6486.801.1.1.1.2.1.3.3INTEGER {remoteLoggingFailure(1), loggingServiceNotRunning(2)}read-onlycurrent
systemStorageLockStatus
OBJECT-TYPE
This object indicates the system storage lock status.
1.3.6.1.4.1.6486.801.1.1.1.2.1.3.4INTEGER {locked(1), unlocked(2)}read-onlycurrent
swlogdRestart
OBJECT-TYPE
This trap is sent when swlogd/syslogd is restarted
1.3.6.1.4.1.6486.801.1.1.1.2.1.3.5SnmpAdminString (SIZE(1..255))read-onlycurrent
alcatelIND1SystemMIBTraps
OBJECT-IDENTITY
Branch For Alcatel IND BOP Proprietary System Subsystem Trap Information.
1.3.6.1.4.1.6486.801.1.1.1.2.1.4current

Notifications

NameOIDStatus
systemSwlogSizeTrap
NOTIFICATION-TYPE
The file specified file may get lost if not backed up , since swlog file reached 90% of its size , please back up swlog before getting overwritten.
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.1current
systemSwlogFailureTraps
NOTIFICATION-TYPE
when swlog fails to store log message to /flash/swlog_chassis* file, then this trap is sent to the Management Entity, with the message which was failed to persist. This trap will also be raised during failure sending the swlog to external syslog server.
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.2current
systemRebootSwlogFailureTrap
NOTIFICATION-TYPE
When swlog fails to send log message to remote server or log service is not running, the system need to be rebooted. This trap is sent to the management entity to indicate the reboot reason.
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.3current
systemStorageLockTrap
NOTIFICATION-TYPE
When system storage is locked or unlocked, this trap is sent to management entity to indicate the storage lock status.
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.4current
swlogdRestartTrap
NOTIFICATION-TYPE
When swlogd/syslogd is restarted, this trap is sent as an indication.
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.5current

Conformance

NameOIDStatus
systemMicrocodeGroup
OBJECT-GROUP
Group all the system microcode objects together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.1current
systemBootParamsGroup
OBJECT-GROUP
Group all the system boot parameters together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.2current
systemHardwareGroup
OBJECT-GROUP
Group all the system Hardware Data together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.3current
systemServicesGroup
OBJECT-GROUP
Group all the system services parameters together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.4current
systemFileSystemGroup
OBJECT-GROUP
Group all the system flash file parameters together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.5current
systemSwitchLoggingGroup
OBJECT-GROUP
Group all the switch logging parameters together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.6current
systemDNSGroup
OBJECT-GROUP
Group all the systemDNS parameters together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.7current
systemBlueToothServicesGroup
OBJECT-GROUP
Group all the systemFips parameters together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.8current
systemFipsGroup
OBJECT-GROUP
Group all the systemFips parameters together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.9current
systemVcHardwareGroup
OBJECT-GROUP
Group all the system VC Hardware Data together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.10current
systemSwlogGroup
OBJECT-GROUP
Group all the swlog trap objects together
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.11current
systemNotificationGroup
NOTIFICATION-GROUP
A collection of notifications for System Services events.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.12current
ovCloudAgentGroup
OBJECT-GROUP
Group all the ovCloudAgent parameters together.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.13current
systemStorageGroup
OBJECT-GROUP
Group all the systemStorage parameters together.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.14current
systemStorageLockSftpServerGroup
OBJECT-GROUP
Group all the systemStorageLockSftpServer parameters together.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.15current
systemStorageLockOutputFileGroup
OBJECT-GROUP
Group all the systemStorageLockOutputFile parameters together.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.16current
systemStorageLockingGroup
OBJECT-GROUP
Group all the systemStorage parameters together.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.17current
systemSslCipherGroup
OBJECT-GROUP
Collection of objects for SSL ciphers.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.18current
systemMgmtAgentGroup
OBJECT-GROUP
Group all the MGMT agent parameters together.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.19current
systemSslPkiGroup
OBJECT-GROUP
Collection of objects for SSL PKI.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.20current
systemPythonPipGroup
OBJECT-GROUP
Collection of objects for python pip.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.21current
alcatelIND1SystemMIBCompliance
MODULE-COMPLIANCE
Compliance statement for Alcatel BOP Proprietary System Subsystem.
1.3.6.1.4.1.6486.801.1.1.1.2.1.2.2.1current