ALCATEL-IND1-DA-MIB
- Registered at
- 1.3.6.1.4.1.6486.801.1.2.1.63.1
- Last updated
- 2019-11-27 00:00
- Organization
- ALE USA Inc.
- Revisions
- 2019-11-27 00:00, 2007-04-03 00:00
- Namespace
- alcatel-aos7
- Source file
ALCATEL-IND1-DA-MIB- Digest
sha256:ab70339fc7acecd1d83f60f51b1795583251f8d3fef22e2883fcafc733db9c2e
Description
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Contact
Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com
Imports
| From | Symbols |
|---|---|
| ALCATEL-IND1-BASE | softentIND1Da |
| ALCATEL-IND1-SYSTEM-MIB | systemServicesDate, systemServicesTime |
| ALCATEL-IND1-TIMETRA-TC-MIB | TmnxEncapVal |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv4, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ALCATEL-IND1-BASE ALCATEL-IND1-DA-MIB ALCATEL-IND1-SYSTEM-MIB ALCATEL-IND1-TIMETRA-GLOBAL-MIB ALCATEL-IND1-TIMETRA-TC-MIB ALCATEL-IND1-VIRTUAL-CHASSIS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB IPV6-TC SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AlaDaAuthenticationResult TEXTUAL-CONVENTION The result of the authentication. If the AlaDaAuthenticationType of this device is noAuthentication then this object will return notApplicable. If the authentication has not completed then this object will return inProgress. | current | |||
| AlaDaAuthenticationType TEXTUAL-CONVENTION The type of authentication used | current | |||
| AlaDaClassificationPolicyType TEXTUAL-CONVENTION This policy type is the classification policy used to classify a device onto the system. | current | |||
| AlaDaMacLearntState TEXTUAL-CONVENTION The state of MAC address in the system | current | |||
| AlaMultiChassisConfigStatus TEXTUAL-CONVENTION The status of Multi-Chassis consistency check. If no MCLAG involved then status is local to the switch. | current | |||
| MacOui TEXTUAL-CONVENTION Represents a MAC-OUI. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| alaIND1DaMIBNotifications OBJECT-IDENTITY Branch For DA Subsystem Notifications. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0 | current | ||
| alaIND1DaMIBObjects OBJECT-IDENTITY Branch For DA Subsystem Managed Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1 | current | ||
| alaDaUserNetProfileTable OBJECT-TYPE This table stores the UNP profiles created in the system. The entries would be mapped to vlan ID which would be used by device authentication for classifying users. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1 | not-accessible | deprecated | |
| alaDaUserNetProfileEntry OBJECT-TYPE User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1 | not-accessible | deprecated | |
| alaDaUserNetProfileName OBJECT-TYPE The name of this profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | deprecated |
| alaDaUserNetProfileVlanID OBJECT-TYPE The VLAN id for this profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.2 | Integer32 (1..4094) | read-create | deprecated |
| alaDaUserNetProfileRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.3 | RowStatus | read-create | deprecated |
| alaDaUserNetProfileQosPolicyListName OBJECT-TYPE The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device along with alaDaUserNetProfileVlanID. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.4 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUserNetProfileMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.5 | AlaMultiChassisConfigStatus | read-only | deprecated |
| alaDaUserNetProfileSaaProfileName OBJECT-TYPE The name of the SAA profile that is associated to this profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.6 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUserNetProfileMobileTag OBJECT-TYPE User Net Profile Mobile Tag . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.7 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUserNetProfileMaxIngressBw OBJECT-TYPE Maximum Ingress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile. If value is set to -1, then the Ingress Bandwidth specified for the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.8 | Integer32 (-1 | 0..2147483647) | read-create | deprecated |
| alaDaUserNetProfileMaxEgressBw OBJECT-TYPE Maximum Egress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile. If value is set to -1, then the Egress Bandwidth specified for the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.9 | Integer32 (-1 | 0..2147483647) | read-create | deprecated |
| alaDaUserNetProfileMaxIngressDepth OBJECT-TYPE Maximum Ingress Depth associated to Bandwidth. If set to -1, then the Depth associated with the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.10 | Integer32 (-1 | 0..16384) | read-create | deprecated |
| alaDaUserNetProfileMaxEgressDepth OBJECT-TYPE Maximum Egress Depth associated to Bandwidth. If set to -1, then the Depth associated with the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.11 | Integer32 (-1 | 0..16384) | read-create | deprecated |
| alaDaUNPIpNetRuleTable OBJECT-TYPE A list of IP network address rules. This is used to match the InetAddress of a packet to a User Network Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2 | not-accessible | deprecated | |
| alaDaUNPIpNetRuleEntry OBJECT-TYPE An IP network address rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1 | not-accessible | deprecated | |
| alaDaUNPIpNetRuleAddrType OBJECT-TYPE The IP network address type used for VLAN classification. For now Only IPv4 is supported. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.1 | InetAddressType | not-accessible | deprecated |
| alaDaUNPIpNetRuleAddr OBJECT-TYPE The IP network address used for VLAN classification. Only IPv4 is supported. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.2 | InetAddress | not-accessible | deprecated |
| alaDaUNPIpNetRuleMask OBJECT-TYPE The IP network mask applying to the IP network address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.3 | InetAddress | not-accessible | deprecated |
| alaDaUNPIpNetRuleProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.4 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPIpNetRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.5 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPIpNetRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.6 | RowStatus | read-create | deprecated |
| alaDaUNPIpNetRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.7 | AlaMultiChassisConfigStatus | read-only | deprecated |
| alaDaUNPMacRuleTable OBJECT-TYPE A list of MAC address rules. This is used to match the MAC Address of a packet to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3 | not-accessible | deprecated | |
| alaDaUNPMacRuleEntry OBJECT-TYPE A MAC rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1 | not-accessible | deprecated | |
| alaDaUNPMacRuleAddr OBJECT-TYPE The MAC address used for VLAN classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.1 | MacAddress | not-accessible | deprecated |
| alaDaUNPMacRuleProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.3 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPMacRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.4 | RowStatus | read-create | deprecated |
| alaDaUNPMacRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.5 | AlaMultiChassisConfigStatus | read-only | deprecated |
| alaDaUNPMacRangeRuleTable OBJECT-TYPE A list of MAC range rules. This is used to match the MAC Address Range of a packet to a User Network Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4 | not-accessible | deprecated | |
| alaDaUNPMacRangeRuleEntry OBJECT-TYPE A MAC range rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1 | not-accessible | deprecated | |
| alaDaUNPMacRangeRuleLoAddr OBJECT-TYPE The lower bound of MAC address range used for VLAN classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.1 | MacAddress | not-accessible | deprecated |
| alaDaUNPMacRangeRuleHiAddr OBJECT-TYPE The upper bound of MAC address range used for VLAN classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.2 | MacAddress | read-create | deprecated |
| alaDaUNPMacRangeRuleProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacRangeRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. The range states the valid vlan range in the system. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.4 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPMacRangeRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.5 | RowStatus | read-create | deprecated |
| alaDaUNPMacRangeRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.6 | AlaMultiChassisConfigStatus | read-only | deprecated |
| alaDaUNPVlanTagRuleTable OBJECT-TYPE A list of Vlan Tag based classification rules. This is used to match the vlan tag in a packet to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5 | not-accessible | deprecated | |
| alaDaUNPVlanTagRuleEntry OBJECT-TYPE A Vlan Tag rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1 | not-accessible | deprecated | |
| alaDaUNPVlanTagRuleVlan OBJECT-TYPE The Vlan Tag used for VLAN classification. The range states the valid Vlan range in the system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.1 | Integer32 (1..4094) | not-accessible | deprecated |
| alaDaUNPVlanTagRuleProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPVlanTagRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.3 | RowStatus | read-create | deprecated |
| alaDaUNPVlanTagRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.4 | AlaMultiChassisConfigStatus | read-only | deprecated |
| alaDaMacUserTable OBJECT-TYPE A table of MAC address learned on an UNP port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6 | not-accessible | current | |
| alaDaMacUserEntry OBJECT-TYPE Non 802.1x supplicant information. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1 | not-accessible | current | |
| alaDaMacUserIntfNum OBJECT-TYPE The ifIndex representing the slot and port where the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.1 | InterfaceIndex | not-accessible | current |
| alaDaMacUserMACAddress OBJECT-TYPE The MAC address of the non 802.1x supplicant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.2 | MacAddress | not-accessible | current |
| alaDaMacUserVlanID OBJECT-TYPE The Id of the VLAN on which the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.3 | Integer32 (1..4096) | read-only | current |
| alaDaAuthenticationStatus OBJECT-TYPE Authentication status of the non 802.1x supplicant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.4 | INTEGER {idle(1), inProgress(2), authenticated(3), failed(4), failedTimeout(5), failedNoServer(6), failedNoResources(7)} | read-only | current |
| alaDaMacUserIpAddress OBJECT-TYPE The ip address from which the mac user is sending the packets | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.5 | IpAddress | read-only | current |
| alaDaMacUserUnpUsed OBJECT-TYPE The UNP used for classifying the mac user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.6 | SnmpAdminString | read-only | current |
| alaDaMacUserLoginTimeStamp OBJECT-TYPE The Login time stamp of the mac user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.7 | DateAndTime | read-only | current |
| alaDaMacUserAuthtype OBJECT-TYPE The authentication type of the mac user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.8 | INTEGER {macAuthentication(0), others(1), onexAuthentication(2)} | read-only | current |
| alaDaMacUserClassificationSource OBJECT-TYPE Classification policy under which the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.9 | AlaDaClassificationPolicyType | read-only | current |
| alaDaMacUserName OBJECT-TYPE The mac user name | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.10 | SnmpAdminString | read-only | current |
| alaDaUNPPortTable OBJECT-TYPE A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7 | not-accessible | current | |
| alaDaUNPPortEntry OBJECT-TYPE Each of these entries represents a user port on which UNP is enabled and their configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1 | not-accessible | current | |
| alaDaUNPPortIfIndex OBJECT-TYPE The interface index of the UNP enabled port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.1 | InterfaceIndexOrZero | accessible-for-notify | current |
| alaDaUNPPortDefaultProfileName OBJECT-TYPE The default UNP name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.2 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortPassAltProfileName OBJECT-TYPE The Pass alternate UNP name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.4 | RowStatus | read-create | current |
| alaDaUNPPortMacAuthFlag OBJECT-TYPE The flag to indicate if MAC AUTH is enabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.5 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortClassificationFlag OBJECT-TYPE The flag to indicate if Classification is enabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.6 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTrustTagStatus OBJECT-TYPE The flag to indicate whether the vlan tag in the incoming packet could be used for classifying the user when mac authentication fails and classification rules dont match. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.7 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.8 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPPortCustomerDomainId OBJECT-TYPE The Customer Domain that this port belongs to. Default is on domain 0. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.9 | Unsigned32 (0..4294967295) | read-create | deprecated |
| alaDaUNPPortType OBJECT-TYPE The object defines the port as UNP enable bridge-port(1), spb-access-port(2), edge-port(3) and vxlan-access-port(4). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.10 | INTEGER {bridgePort(1), spbAccessPort(2), edge(3), vxlanAccessPort(4), accessPort(5)} | read-create | current |
| alaDaUNPPortPassAltSpbProfileName OBJECT-TYPE The Pass alternate Spb Profile name. This is to be used on a successful authentication and there is no SPB profile passed back from the Authentication Server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.11 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortDefaultSpbProfileName OBJECT-TYPE The default Spb Profile name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.12 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortDefaultEdgeProfName OBJECT-TYPE The default Edge Profile name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.13 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortMacPassEdgeProfName OBJECT-TYPE Mac Authenticattion Edge Profile Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.14 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPort8021XEdgeProfName OBJECT-TYPE 802.1X Pass Alternate Edge Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.15 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPort8021XAuthStatus OBJECT-TYPE flag to indicate 802.1X Authentication . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.16 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPort8021XTxPeriodStatus OBJECT-TYPE flag to indicate if 802.1X Authentication tx-period is configured or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.17 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPPort8021XTxPeriod OBJECT-TYPE 802.1X Tx periaod . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.18 | Integer32 (1..60) | read-create | current |
| alaDaUNPPort8021XSuppTimeoutStatus OBJECT-TYPE flag to indicate if 802.1X Authentication supp-timeout is configured or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.19 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPPort8021XSuppTimeOut OBJECT-TYPE 802.1X Authenttication Supp Timeout . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.20 | Integer32 (1..120) | read-create | current |
| alaDaUNPPort8021XMaxReqStatus OBJECT-TYPE flag to indicate if 802.1X Authentication max-req is configured or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.21 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPPort8021XMaxReq OBJECT-TYPE 802.1X Authenttication Max Req . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.22 | Integer32 (0..3) | read-create | current |
| alaDaUNPPortGroupId OBJECT-TYPE Associated Group ID . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.23 | Integer32 (0..255) | read-create | deprecated |
| alaDaUNPPortAaaProfile OBJECT-TYPE Associated Aaa Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.24 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortEdgeTemplate OBJECT-TYPE Associated Edge Template . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.25 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortRedirectPortBounce OBJECT-TYPE The flag to indicate whether port-bounce is enabled or disabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.26 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPort8021XFailurePolicy OBJECT-TYPE Failure Policy type. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.27 | INTEGER {default(1), macAuth(2)} | read-create | current |
| alaDaUNPPort8021XBypassStatus OBJECT-TYPE Flag to indicate Bypass enable status on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.28 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortMacAllowEap OBJECT-TYPE Flag to indicate Allow Eap on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.29 | INTEGER {pass(1), fail(2), noauth(3), none(4)} | read-create | current |
| alaDaUNPPortAdminControlledDirections OBJECT-TYPE The current value of the administrative controlled directions parameter for the Port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.30 | INTEGER {both(1), in(2), noVal(3)} | read-create | current |
| alaDaUNPPortAdminControlledOperDirections OBJECT-TYPE The operational value of the administrative controlled directions parameter for the Port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.31 | INTEGER {both(1), in(2), noVal(3)} | read-only | current |
| alaDaUNPPort8021XPassAltUserNetProfName OBJECT-TYPE 802.1X Pass Alternate Vlan Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.32 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPort8021XPassAltSpbProfName OBJECT-TYPE 802.1X Pass Alternate SPB Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.33 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPort8021XPassAltVxlanProfName OBJECT-TYPE 802.1X Pass Alternate VXLAN Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.34 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortPassAltVxlanProfileName OBJECT-TYPE The Pass alternate VXLAN Profile name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.35 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortDefaultVxlanProfileName OBJECT-TYPE The default VXLAN Profile name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.36 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortAFDConfig OBJECT-TYPE Configuration is made by admin or auto-fabric on this interface | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.37 | INTEGER {admin(1), autoFabric(2)} | read-only | current |
| alaDaUNPPortMaxIngressBw OBJECT-TYPE Current Ingress BW active on UNP Port in Kbps. If value is -1, it means no Ingress Bandwidth exists on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.38 | Integer32 (-1 | 0..10485760) | read-only | current |
| alaDaUNPPortMaxIngressBwSource OBJECT-TYPE Application responsible for setting Ingress BW on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.39 | INTEGER {notApplicable(1), unp(2), qos(3)} | read-only | current |
| alaDaUNPPortMaxEgressBw OBJECT-TYPE Current Egress BW active on UNP Port in Kbps. If value is -1, it means no Egress Bandwidth exists on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.40 | Integer32 (-1 | 0..10485760) | read-only | current |
| alaDaUNPPortMaxEgressBwSource OBJECT-TYPE Application responsible for setting Egress BW on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.41 | INTEGER {notApplicable(1), unp(2), qos(3)} | read-only | current |
| alaDaUNPPortMaxIngressDepth OBJECT-TYPE Ingress Depth applied on the port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.42 | Integer32 (-1 | 0..16384) | read-only | current |
| alaDaUNPPortMaxEgressDepth OBJECT-TYPE Egress Depth applied on the port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.43 | Integer32 (-1 | 0..16384) | read-only | current |
| alaDaUNPPortIngressSourceProfile OBJECT-TYPE The name of the UNP Profile responsible for setting current Ingress Bandwidth limitation on port. Applicable only if current bandwidth set is due to UNP classification on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.44 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaUNPPortEgressSourceProfile OBJECT-TYPE The name of the UNP Profile responsible for setting current Egress Bandwidth limitation on port. Applicable only if current bandwidth set is due to UNP classification on port | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.45 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaUNPPortForceL3Learning OBJECT-TYPE UNP force L3 learning status on the UNP Port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.46 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortForceL3LearningPortBounce OBJECT-TYPE Port-Bounce associated with UNP force L3 learning status on the UNP Port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.47 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPort8021XPassAltProfileName OBJECT-TYPE 802.1X Pass Alternate Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.48 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortPortTemplateName OBJECT-TYPE Associated port Template . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.49 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortDomainID OBJECT-TYPE The Domain that this port belongs to. Default is on domain 0. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.50 | Unsigned32 (0..4294967295) | read-create | current |
| alaDaUNPPortAdminState OBJECT-TYPE The flag to indicate if admin state is enabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.51 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortDynamicService OBJECT-TYPE Indicates the type of dynamic service for the port. Dynamic Service type SPB,VXLAN/VPLS are applicable for Access type UNP port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.52 | INTEGER {none(1), spb(2), vxlan(3), vpls(4)} | read-create | current |
| alaDaUNPPortPVlanPortType OBJECT-TYPE The Port type in PVLAN Domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.53 | INTEGER {none(1), community(2), isolated(3)} | read-only | current |
| alaDaUNPPortL2Profile OBJECT-TYPE Service L2-Profile to be bound to UNP Dynamic Access Ports for controlling L2-Traffic passing through that port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.54 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortApMode OBJECT-TYPE The flag to indicate whether AP-mode is enabled or disabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.55 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortApModeSecurity OBJECT-TYPE The flag to indicate whether AP-mode security is enabled or disabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.56 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortSwSuppSecureMode OBJECT-TYPE The flag to indicate whether switch supplicant secure mode is enabled or disabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.57 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortBpduLldpLearn OBJECT-TYPE The flag to indicate whether BPDU LLDP learn is enabled or disabled on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.58 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPGlobalConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8 | |||
| alaDaUNPDynamicVlanConfigFlag OBJECT-TYPE Indicated whether dynamic vlan configuration is enabled or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPAuthServerDownUnp OBJECT-TYPE The UNP to be used for classification if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.2 | SnmpAdminString (SIZE(0..32)) | read-write | deprecated |
| alaDaUNPAuthServerDownTimeout OBJECT-TYPE The timeout, in seconds, after which all the users learned in the auth-server-down UNP will be sent for re-authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.3 | Integer32 (10..43200) | read-write | current |
| alaDaUNPDynamicVlanMCLagConfigStatus OBJECT-TYPE Indicated whether dynamic vlan configuration is sync across both MCLAG chassis or not. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.4 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPAuthServerDownUNPMCLagConfigStatus OBJECT-TYPE Indicated whether Auth server down UNP config is sync across both MCLAG chassis or not. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.5 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPAuthServerDownTimeoutMCLagConfigStatus OBJECT-TYPE Indicated whether Auth server down timeout config is sync across both MCLAG chassis or not. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.6 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPDynamicProfileConfigFlag OBJECT-TYPE Indicated whether dynamic profile configuration is enabled or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPDynamicProfileConfigMCLagConfigStatus OBJECT-TYPE Indicated whether dynamic profile creation is sync across both MCLAG chassis or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.8 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPReloadVsiTypeDB OBJECT-TYPE The object triggers the system to reload the VSI Type DB from flash. Once the operation is done it is reset to zero (0). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.9 | INTEGER {default(0), true(1)} | read-write | current |
| alaDaUNPAuthSrvDownEdgeProfName OBJECT-TYPE The Edge Profile to be used for classification if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.10 | SnmpAdminString (SIZE(0..32)) | read-write | deprecated |
| alaDaUNPAuthServerDowneEdgeProfTimeout OBJECT-TYPE The timeout, in seconds, after which all the users learned in the auth-server-down Edge Profile will be sent for re-authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.11 | Integer32 (10..1000) | read-write | deprecated |
| alaDaUNPEdgeUserFlush OBJECT-TYPE Global configuration to flush Edge User . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.12 | TruthValue | read-write | deprecated |
| alaDaUNP8021XEdgeUserFlush OBJECT-TYPE Global configuration to flush Edge User based on auth 802.1X . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.13 | TruthValue | read-write | deprecated |
| alaDaUNPMacEdgeUserFlush OBJECT-TYPE Global configuration to flush Edge User based on auth mac . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.14 | TruthValue | read-write | deprecated |
| alaDaUNPNoAuthEdgeUserFlush OBJECT-TYPE For no authentication , Global configuration to flush Edge User . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.15 | TruthValue | read-write | deprecated |
| alaDaUNPRedirectPortBounce OBJECT-TYPE Redirect port bounce status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.16 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPRedirectPauseTimer OBJECT-TYPE The integer value used to identify the redirect pause timer. A value of zero shall be used to not support pause timer. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.17 | Integer32 (0 | 60..65535) | read-write | current |
| alaDaUNPRedirectProxyServerPort OBJECT-TYPE The integer representing logical port on HTTP Server, By Default proxy HTTP port is 8080. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.18 | Integer32 (0 | 1024..49151) | read-write | current |
| alaDaUNPRedirectServerIPType OBJECT-TYPE Address type of UNP Redirect Server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.19 | InetAddressType {ipv4(1), ipv6(2), dns(16)} | read-write | current |
| alaDaUNPRedirectServerIP OBJECT-TYPE UNP Redirect Server IP Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.20 | InetAddress | read-write | current |
| alaDaUNPAuthSrvDownVxlanProfileName OBJECT-TYPE The Vxlan Profile to be used for classification if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.21 | SnmpAdminString (SIZE(0..32)) | read-write | deprecated |
| alaDaUNPAuthSrvDownVxlanProfileTimeout OBJECT-TYPE The timeout, in seconds, after which all the users learned in the auth-server-down VXLAN Profile will be sent for re-authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.22 | Integer32 (10..1000) | read-write | deprecated |
| alaDaUNPForceL3Learning OBJECT-TYPE UNP force L3 learning status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.23 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPForceL3LearningPortBounce OBJECT-TYPE Port-Bounce associated with UNP force L3 learning status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.24 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPAuthServerDownProfile1 OBJECT-TYPE The profile to be used for classification if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.25 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPAuthServerDownProfile2 OBJECT-TYPE The profile to be used for classification if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.26 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPAuthServerDownProfile3 OBJECT-TYPE The profile to be used for classification if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.27 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPVlanUserFlush OBJECT-TYPE Global configuration to flush Vlan User . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.28 | TruthValue | read-write | deprecated |
| alaDaUNP8021XPassThrough OBJECT-TYPE Global configuration for 802.1x-pass-through functionality. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.29 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPApMode OBJECT-TYPE Global configuration AP mode status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.30 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPServiceModule OBJECT-TYPE Global configuration Service Modulo value | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.31 | Integer32 (1..4096) | read-write | current |
| alaDaUNPServiceBase OBJECT-TYPE Global configuration Service Base value | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.32 | Integer32 (1..10000000) | read-write | current |
| alaDaUNPServiceMulticastMode OBJECT-TYPE Global configuration Service Multicast Mode | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.33 | INTEGER {headend(1), tandem(2), hybrid(3)} | read-write | current |
| alaDaUNPServiceVlanXlation OBJECT-TYPE Global configuration Service VlanXlation | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.34 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPServiceMulticastGroup OBJECT-TYPE Global configuration Service Multicast Group | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.35 | InetAddress | read-write | deprecated |
| alaDaUNPServiceFarEndIpList OBJECT-TYPE Global configuration Service Far end ip list | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.36 | SnmpAdminString | read-write | current |
| alaDaUNPIpv6Drop OBJECT-TYPE Global configuration ipv6 drop status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.37 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPAuthServerDownVoiceProfile1 OBJECT-TYPE The profile to be used for classification of IP-phones, if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.38 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPAuthServerDownVoiceProfile2 OBJECT-TYPE The profile to be used for classification of IP-phones, if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.39 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPAuthServerDownVoiceProfile3 OBJECT-TYPE The profile to be used for classification of IP-phones, if the authentication server is not reachable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.40 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPDelayLearning OBJECT-TYPE Global configuration Delay Learning | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.41 | Integer32 (0..600) | read-write | current |
| alaDaUNPAuthServerDownPortBounce OBJECT-TYPE Global configuration for authentication server down. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.42 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPMacMobility OBJECT-TYPE Global configuration for allowing mac-mobility. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.43 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPEapolVersion OBJECT-TYPE Global configuration EAPOL version. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.44 | INTEGER {v1(1), v3(3)} | read-write | current |
| alaDaUNPApModeSecurity OBJECT-TYPE Global configuration AP mode security status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.45 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPServiceMulticastGroupIPType OBJECT-TYPE Global configuration Service Multicast Group IP address type. Only ipv4 type will be supported at this time | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.46 | InetAddressType {ipv4(1)} | read-write | current |
| alaDaUNPServiceMulticastGroupIP OBJECT-TYPE Global configuration Service Multicast Group IP address | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.47 | InetAddress | read-write | current |
| alaDaUNPMultiUntagSap OBJECT-TYPE Global configuration for multi untag sap. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.48 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPRedirectAllowedWebServerPollingInterval OBJECT-TYPE This object will be used to configure a polling interval (in minutes) to resolve the allowed web server(s) configured using FQDN. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.49 | Integer32 (30..120) | read-write | current |
| alaDaUNPRedirectAllowedWebServerRefresh OBJECT-TYPE This object will be used to trigger refreshing the FQDN names at run-time, before waiting for polling interval to expire. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.50 | INTEGER {refresh(1)} | read-write | current |
| alaDaUNPServiceVplsSignaling OBJECT-TYPE Global configuration Service Vpls signaling. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.51 | INTEGER {ldp(1), bgp(2)} | read-write | current |
| alaDaUNPServiceVplsLdpFarEndIPList OBJECT-TYPE Global configuration vpls signaling name of the Far End IP List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.52 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPServiceVplsBgpVeID OBJECT-TYPE Global configuration Service vpls signaling bgp ve ID. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.53 | Unsigned32 (0 | 1..1000) | read-write | current |
| alaDaUNPServiceBvlanModulo OBJECT-TYPE Global configuration Service bvlan modulo. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.54 | Integer32 (1..8) | read-write | current |
| alaDaUNPApModeType OBJECT-TYPE Global configuration AP mode type | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.55 | INTEGER {stellar(1), all(2)} | read-write | current |
| alaDaMacVlanUserTable OBJECT-TYPE A table of non 802.1x supplicants learned on 802.1x authenticated ports. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9 | not-accessible | current | |
| alaDaMacVlanUserEntry OBJECT-TYPE Non 802.1x supplicant information. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1 | not-accessible | current | |
| alaDaMacVlanUserIntfNum OBJECT-TYPE The ifIndex representing the slot and port where the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.1 | InterfaceIndex | not-accessible | current |
| alaDaMacVlanUserMACAddress OBJECT-TYPE The MAC address of the non 802.1x supplicant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.2 | MacAddress | not-accessible | current |
| alaDaMacVlanUserVlanID OBJECT-TYPE The Id of the VLAN on which the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.3 | Integer32 (1..4096) | not-accessible | current |
| alaDaMacVlanUserAuthStatus OBJECT-TYPE Authentication status of the non 802.1x supplicant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.4 | INTEGER {idle(1), inProgress(2), authenticated(3), failed(4), failedTimeout(5), failedNoServer(6), failedNoResources(7)} | read-only | current |
| alaDaMacVlanUserIpAddressType OBJECT-TYPE The type of the IP address of the user. For now only IPv4 is supported. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.5 | InetAddressType | read-only | current |
| alaDaMacVlanUserIpAddress OBJECT-TYPE The ip address from which the mac user is sending the packets | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.6 | InetAddress | read-only | current |
| alaDaMacVlanUserUnpUsed OBJECT-TYPE The UNP used for classifying the mac user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.7 | SnmpAdminString | read-only | current |
| alaDaMacVlanUserLoginTimeStamp OBJECT-TYPE The Login time stamp of the mac user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.8 | DateAndTime | read-only | current |
| alaDaMacVlanUserAuthtype OBJECT-TYPE The authentication type of the mac user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.9 | INTEGER {macAuthentication(0), others(1), onexAuthentication(2)} | read-only | current |
| alaDaMacVlanUserClassificationSource OBJECT-TYPE Classification policy under which the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.10 | AlaDaClassificationPolicyType | read-only | current |
| alaDaMacVlanUserMCLagLearningLoc OBJECT-TYPE Source of Learning. Informs whether the Mac was learnt locally or through remote. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.11 | INTEGER {local(1), remote(2)} | read-only | current |
| alaDaMacVlanUserName OBJECT-TYPE The UNP used for classifying the mac user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.12 | SnmpAdminString | read-only | current |
| alaDaMacVlanUserRole OBJECT-TYPE The UNP used for classifying the mac user role | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.13 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaMacVlanUserRoleSource OBJECT-TYPE The mac user role source | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.14 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaMacVlanUserAuthFailReason OBJECT-TYPE The mac vlan user auth fail reason. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.15 | SnmpAdminString (SIZE(1..32)) | read-only | current |
| alaDaMacVlanUserAuthRetryCount OBJECT-TYPE The mac vlan user auth retry count. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.16 | Integer32 (1..2147483647) | read-only | current |
| alaDaMacVlanUserClassifProfRule OBJECT-TYPE The mac vlan user auth server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.17 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaMacVlanUserRoleRule OBJECT-TYPE The mac vlan user auth server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.18 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaMacVlanUserRestAccessStatus OBJECT-TYPE The mac vlan user auth server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.19 | INTEGER {yes(1), no(2)} | read-only | current |
| alaDaMacVlanUserLocPolicyStatus OBJECT-TYPE The mac vlan user auth server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.20 | INTEGER {notApplicable(1), pass(2), fail(3)} | read-only | current |
| alaDaMacVlanUserTimePolicyStatus OBJECT-TYPE The mac vlan user auth server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.21 | INTEGER {notApplicable(1), pass(2), fail(3)} | read-only | current |
| alaDaMacVlanUserCapPortalStatus OBJECT-TYPE The mac vlan user auth server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.22 | INTEGER {notApplicable(1), pass(2), fail(3)} | read-only | current |
| alaDaMacVlanUserQMRStatus OBJECT-TYPE The mac vlan user auth server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.23 | INTEGER {notApplicable(1), pass(2), fail(3)} | read-only | current |
| alaDaMacVlanUserAuthServerIpType OBJECT-TYPE The type of the IP address of the user. For now only IPv4 is supported. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.24 | InetAddressType | read-only | current |
| alaDaMacVlanUserAuthServerIpUsed OBJECT-TYPE The authentication server ip address used to authentication the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.25 | InetAddress | read-only | current |
| alaDaMacVlanUserAuthServerUsed OBJECT-TYPE The authentication server name (configured in AAA) used for the latest authentication session of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.26 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaMacVlanUserServerMessage OBJECT-TYPE The RADIUS server message displayed to the user. In case of successful authentication the information returned in the RADIUS Reply-Message attribute is displayed to the user, otherwise the reason for failure is displayed to the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.27 | SnmpAdminString | read-only | current |
| alaDaMacVlanUserRedirectionUrl OBJECT-TYPE The mac vlan user redirection URL. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.28 | SnmpAdminString | read-only | current |
| alaDaMacVlanUserSIPCallType OBJECT-TYPE SIP call type status of the non 802.1x supplicant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.29 | INTEGER {normalCall(1), emergencyCall(2), notInCall(3)} | read-only | current |
| alaDaMacVlanUserSIPMediaType OBJECT-TYPE SIP media type status of the non 802.1x supplicant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.30 | INTEGER {other(1), audio(2), video(3), none(4)} | read-only | current |
| alaDaMacVlanUserUnpFromAuthServer OBJECT-TYPE The UNP profile returned from the Authentication server. It also indicates if the profile is configured in the system or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.31 | SnmpAdminString | read-only | current |
| alaDaMacVlanUserType OBJECT-TYPE Service type of UNP user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.32 | INTEGER {bridge(1), spbAccess(2), edge(3), vxlanAccess(4), l2greAccess(5)} | read-only | current |
| alaDaMacVlanUserServiceID OBJECT-TYPE Service ID assigned to of UNP user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.33 | Unsigned32 | read-only | current |
| alaDaMacVlanUserServiceSapIDIfIndex OBJECT-TYPE Interface Index of the Service SAP-ID assigned to the UNP users. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.34 | InterfaceIndex | read-only | current |
| alaDaMacVlanUserServiceSapIDEncapVal OBJECT-TYPE Encapsulation Value of the Service SAP-ID assigned to of UNP user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.35 | TmnxEncapVal | read-only | current |
| alaDaMacVlanUserVxlanVnid OBJECT-TYPE VNID assigned to the VXLAN UNP user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.36 | Unsigned32 | read-only | current |
| alaDaMacVlanUserSpbIsid OBJECT-TYPE I-SID assigned to the SPB UNP user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.37 | Unsigned32 | read-only | current |
| alaDaMacVlanUserSpbBVlan OBJECT-TYPE BVLAN ID assigned to the SPB UNP user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.38 | Unsigned32 | read-only | current |
| alaDaMacVlanUserKerberosStatus OBJECT-TYPE The mac vlan user Kerberos authentication status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.39 | INTEGER {notApplicable(1), pass(2), fail(3)} | read-only | current |
| alaDaMacVlanUserL2greVpnid OBJECT-TYPE VPN ID assigned to the L2GRE UNP user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.40 | Unsigned32 | read-only | current |
| alaDaMacVlanUserImplicitTrustTagSource OBJECT-TYPE Implict trust tagged vlan source. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.41 | INTEGER {none(1), unpProfile(2), radius(3)} | read-only | current |
| alaDaMacVlanUserRadiusTrustVlanStr OBJECT-TYPE Radius returned trust tagged vlan string. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.42 | SnmpAdminString (SIZE(0..255)) | read-only | current |
| alaDaUNPNotificationObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10 | |||
| alaDaUnpMacAddr OBJECT-TYPE The mac which failed to get configured on peer chassis. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.1 | MacAddress | accessible-for-notify | current |
| alaDaUnpSourceIpAddr OBJECT-TYPE The ip-address of mac which failed to get configured on peer chassis. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.2 | IpAddress | accessible-for-notify | current |
| alaDaUnpNativeVlan OBJECT-TYPE The native vlan of MCLAG on which the mac ingressed. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.3 | Integer32 | accessible-for-notify | current |
| alaDaUnpVlan OBJECT-TYPE The vlan on which mac was classified on local chassis | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.4 | Integer32 (1..4094) | accessible-for-notify | current |
| alaDaUnpMCLAGId OBJECT-TYPE The lag id for MCLAG | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.5 | Integer32 | accessible-for-notify | current |
| alaDaUnpCommandType OBJECT-TYPE Indicates which configuration command is out-of-sync | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.6 | INTEGER {unpConfigCmd(1), macRuleConfigCmd(2), macRangeRuleConfigCmd(3), ipRuleConfigCmd(4), vlanTagRuleConfigCmd(5), authServerUnpConfigCmd(6), authServerTimerConfigCmd(7), dynamicVlanConfigCmd(8), lagConfigCmd(9), dynamicProfileConfigCmd(10)} | accessible-for-notify | current |
| alaDaUnpName OBJECT-TYPE Indicates which unp profile is out-of-sync. If there is no UNP Profile associated then zero length string is sent | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.7 | SnmpAdminString (SIZE(1..32)) | accessible-for-notify | current |
| alaDaUnpMacAddr1 OBJECT-TYPE The mac for mac rule or the lower limit of mac-range rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.8 | MacAddress | accessible-for-notify | current |
| alaDaUnpMacAddr2 OBJECT-TYPE The upper limit of mac-range rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.9 | MacAddress | accessible-for-notify | current |
| alaDaUnpIpAddr OBJECT-TYPE The ip-address in ip-rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.10 | IpAddress | accessible-for-notify | current |
| alaDaUnpIpMask OBJECT-TYPE The ip-address in ip-rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.11 | IpAddress | accessible-for-notify | current |
| alaDaUnpVlanTag OBJECT-TYPE The vlan vlan-tag rule. Zero value means it is not applicable | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.12 | Integer32 (0..4094) | accessible-for-notify | current |
| alaDaKerberosRateLimitString OBJECT-TYPE Failure string for Rate Limit Trap. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.13 | SnmpAdminString (SIZE(1..32)) | accessible-for-notify | current |
| alaDaRouterAuthNumberOfUsersPassedAuthentication OBJECT-TYPE Number of users passed authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.14 | Unsigned32 | accessible-for-notify | current |
| alaDaRouterAuthUserSourceIpAddressType OBJECT-TYPE The type of the source IP address of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.15 | InetAddressType | accessible-for-notify | current |
| alaDaRouterAuthUserSourceIpAddress OBJECT-TYPE Source IP address of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.16 | InetAddress | accessible-for-notify | current |
| alaDaRouterAuthUserDestinationIpAddressType OBJECT-TYPE The type of destination IP in the packet. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.17 | InetAddressType | accessible-for-notify | current |
| alaDaRouterAuthUserDestinationIpAddress OBJECT-TYPE Destination IP in the packet. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.18 | InetAddress | accessible-for-notify | current |
| alaDaRouterAuthUserName OBJECT-TYPE User name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.19 | SnmpAdminString | accessible-for-notify | current |
| alaDaRouterAuthUserAttempts OBJECT-TYPE Number of attempts by the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.20 | Unsigned32 | accessible-for-notify | current |
| alaDaRouterAuthNumberOfUsersFailedAuthentication OBJECT-TYPE Number of users failed authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.21 | Unsigned32 | accessible-for-notify | current |
| alaDaRouterAuthNumberOfAuthenticatedUsers OBJECT-TYPE Total number of router authenticated users on the system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.22 | Unsigned32 | accessible-for-notify | current |
| alaDaRouterAuthNumberOfConfigUsed OBJECT-TYPE Total number of Router Auth Config used on the system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.23 | Unsigned32 | accessible-for-notify | current |
| alaDaUnpMaxUserSupported OBJECT-TYPE Maximum number of users supported on the system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.24 | Integer32 | accessible-for-notify | current |
| alaDaUnpMaxUserCurrentNumberOfUsers OBJECT-TYPE Maximum current number of users. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.25 | Integer32 | accessible-for-notify | current |
| alaDaUnpHWResourceChassisId OBJECT-TYPE The chassis ID of the switch. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.26 | Integer32 | accessible-for-notify | current |
| alaDaUnpHWResourceSlot OBJECT-TYPE The slot number for the chassis. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.27 | Integer32 | accessible-for-notify | current |
| alaDaUnpHWResourceTtiAllocated OBJECT-TYPE The number of TTI resources has been allocated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.28 | Integer32 | accessible-for-notify | current |
| alaDaUnpAuthMACAddress OBJECT-TYPE MAC address of the switch which was subjected to authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.29 | MacAddress | accessible-for-notify | current |
| alaDaUnpAuthStatus OBJECT-TYPE Authentication Result of the AOS switch. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.30 | INTEGER {idle(1), inProgress(2), authenticated(3), failed(4), failedTimeout(5), failedNoServer(6), failedNoResources(7)} | accessible-for-notify | current |
| alaDaUnpAuthRADIUSServerIPType OBJECT-TYPE IP address type of the RADIUS server used for authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.31 | InetAddressType | accessible-for-notify | current |
| alaDaUnpAuthRADIUSServerIP OBJECT-TYPE IP address of the RADIUS server used for authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.32 | InetAddress | accessible-for-notify | current |
| alaDaUnpAuthServerReplyMsg OBJECT-TYPE Reply message for the failed user from RADIUS. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.33 | SnmpAdminString (SIZE(0..255)) | accessible-for-notify | current |
| alaDaUnpAuthFailureReason OBJECT-TYPE Reason for failed authentication of AOS switch returned from RADIUS. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.34 | SnmpAdminString (SIZE(0..255)) | accessible-for-notify | current |
| alaDaUnpCustomerDomainTable OBJECT-TYPE This table creates and deletes the UNP group within a switch. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11 | not-accessible | current | |
| alaDaUnpCustomerDomainEntry OBJECT-TYPE UNP Group: entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1 | not-accessible | current | |
| alaDaUnpCustomerDomainId OBJECT-TYPE The Customer Domain ID. Domain ID zero (0) is the default and is always present in the switch. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| alaDaUnpCustomerDomainDesc OBJECT-TYPE A field to provide meaningful description of the Customer Domain for easy identification of the domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.2 | SnmpAdminString (SIZE(0..128)) | read-create | current |
| alaDaUnpCustomerDomainRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.3 | RowStatus | read-create | current |
| alaDaSpbProfileTable OBJECT-TYPE This table stores the Service Classification profiles created in the system. The entries provides information to classify device in the Service domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12 | not-accessible | obsolete | |
| alaDaSpbProfileEntry OBJECT-TYPE Service Classification Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1 | not-accessible | obsolete | |
| alaDaSpbProfileName OBJECT-TYPE The name of this profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | obsolete |
| alaDaSpbProfileEncapVal OBJECT-TYPE The encapsulation to be used for the SAP connecting to the service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.2 | TmnxEncapVal | read-create | obsolete |
| alaDaSpbProfileQosPolicyListName OBJECT-TYPE The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device along with alaDaSpbProfileVlanID. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | obsolete |
| alaDaSpbProfileIsid OBJECT-TYPE The object represnet the I-SID that is to be dynamically created when alaDaSpbProfileServiceID does not exist in the system and must be used along with alaDaSpbProfileBVlan. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.4 | Unsigned32 (256..16777214) | read-create | obsolete |
| alaDaSpbProfileBVlan OBJECT-TYPE The Backbone VLAN ID (BVLAN) used for the I-SID specified in alaDaSpbProfileIsid. This object must be specified along with alaDaSpbProfileIsid. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.5 | Unsigned32 (1..4094) | read-create | obsolete |
| alaDaSpbProfileRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.6 | RowStatus | read-create | obsolete |
| alaDaSpbProfileMulticastMode OBJECT-TYPE To configure the multicast replication mode for each service: Head-end(1) where a non-unicast packet entering the SAP port is replicated once for each receiver in the b-domain using its unicast BMAC. Tandem(2) where a non-unicast packet entering the SAP port is replicated once at each node using the multicast group address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.7 | INTEGER {headend(1), tandem(2)} | read-create | obsolete |
| alaDaSpbProfileSapVlanXlation OBJECT-TYPE To enable/disable the vlan translation for all the SAPs configured in this service if the corresponding access ports for the SAPs also has the vlan translation enabled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.8 | INTEGER {enable(1), disable(2)} | read-create | obsolete |
| alaDaSpbProfileMobileTag OBJECT-TYPE SPB Profile Mobile Tag . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.9 | INTEGER {enable(1), disable(2)} | read-create | obsolete |
| alaDaSpbProfileAFDConfig OBJECT-TYPE Configuration is made by admin or auto-fabric on this profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.10 | INTEGER {admin(1), autoFabric(2)} | read-only | obsolete |
| alaDaUNPCustDomainEvbGpIdRuleTable OBJECT-TYPE A list of EVB group ID based classification rules. This is used to match the EVB Group ID passed from EVB to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13 | not-accessible | current | |
| alaDaUNPCustDomainEvbGpIdRuleEntry OBJECT-TYPE A EVB Group ID rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1 | not-accessible | current | |
| alaDaUNPCustDomainEvbGpIdRuleCustomerDomainId OBJECT-TYPE The UNP Customer Domain ID that will be used for profile lookup. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| alaDaUNPCustDomainEvbGpIdRuleGroupId OBJECT-TYPE The EVB Group ID used for profile lookup. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.2 | Unsigned32 (0..4294967295) | not-accessible | current |
| alaDaUNPCustDomainEvbGpIdRuleVlanProfileName OBJECT-TYPE The VLAN profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPCustDomainEvbGpIdRuleSpbProfileName OBJECT-TYPE The SBP profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.4 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPCustDomainEvbGpIdRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.5 | RowStatus | read-create | current |
| alaDaUNPCustDomainEvbGpIdRuleVxlanProfileName OBJECT-TYPE The VXLAN profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.6 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainVlanTagRuleTable OBJECT-TYPE A list of Customer Domain and Vlan Tag based classification rules. This is used to match the vlan tag in a packet and the port's UNP Customer Domain to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14 | not-accessible | current | |
| alaDaUNPCustDomainVlanTagRuleEntry OBJECT-TYPE A Vlan Tag rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1 | not-accessible | current | |
| alaDaUNPCustDomainVlanTagRuleDomainId OBJECT-TYPE The UNP Customer Domain ID for profile lookup. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| alaDaUNPCustDomainVlanTagRuleVlan OBJECT-TYPE The VLAN Tag used for VLAN classification. The range states the valid VLAN range in the system. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.2 | Integer32 (1..4094) | not-accessible | current |
| alaDaUNPCustDomainVlanTagRuleVlanProfileName OBJECT-TYPE The VLAN profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainVlanTagRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.4 | RowStatus | read-create | current |
| alaDaUNPCustDomainVlanTagRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.5 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPCustDomainVlanTagRuleSpbProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.6 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainVlanTagRuleTagPosition OBJECT-TYPE This object specify the tag position to apply this Vlan Tag rule for double tagged frames. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.7 | INTEGER {notApplicable(0), outerTag(1), innerTag(2)} | read-create | deprecated |
| alaDaUNPCustDomainVlanTagRuleVxlanProfileName OBJECT-TYPE The VXLAN profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPCustDomainVlanTagRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainVlanTagRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainVlanTagRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.11 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainIpNetRuleTable OBJECT-TYPE A list of IP network address rules. This is used to match the InetAddress of a packet to a User Network Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15 | not-accessible | current | |
| alaDaUNPCustDomainIpNetRuleEntry OBJECT-TYPE An IP network address rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1 | not-accessible | current | |
| alaDaUNPCustDomainIpNetRuleDomainId OBJECT-TYPE The UNP Customer Domain ID for profile lookup. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| alaDaUNPCustDomainIpNetRuleAddrType OBJECT-TYPE The IP network address type used for VLAN classification. For now Only IPv4 is supported. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.2 | InetAddressType | not-accessible | current |
| alaDaUNPCustDomainIpNetRuleAddr OBJECT-TYPE The IP network address used for VLAN classification. Only IPv4 is supported. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.3 | InetAddress (SIZE(4 | 16)) | not-accessible | current |
| alaDaUNPCustDomainIpNetRuleMask OBJECT-TYPE The IP network mask applying to the IP network address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.4 | InetAddress (SIZE(4 | 16)) | not-accessible | current |
| alaDaUNPCustDomainIpNetRuleProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.5 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainIpNetRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.6 | Integer32 (0..4094) | read-create | current |
| alaDaUNPCustDomainIpNetRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.7 | RowStatus | read-create | current |
| alaDaUNPCustDomainIpNetRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.8 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPCustDomainIpNetRuleSpbProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.9 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainIpNetRuleEdgeProfile OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.10 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainIpNetRuleVxlanProfileName OBJECT-TYPE The VXLAN profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.11 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPCustDomainIpNetRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.12 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainIpNetRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.13 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainIpNetRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.14 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainMacRuleTable OBJECT-TYPE A list of MAC address rules. This is used to match the MAC Address of a packet to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16 | not-accessible | current | |
| alaDaUNPCustDomainMacRuleEntry OBJECT-TYPE A MAC rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1 | not-accessible | current | |
| alaDaUNPCustDomainMacRuleDomainId OBJECT-TYPE The UNP Customer Domain ID for profile lookup. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| alaDaUNPCustDomainMacRuleAddr OBJECT-TYPE The MAC address used for VLAN classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.2 | MacAddress | not-accessible | current |
| alaDaUNPCustDomainMacRuleProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.4 | Integer32 (0..4094) | read-create | current |
| alaDaUNPCustDomainMacRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.5 | RowStatus | read-create | current |
| alaDaUNPCustDomainMacRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.6 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPCustDomainMacRuleSpbProfileName OBJECT-TYPE The SBP profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.7 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRuleEdgeProfileName OBJECT-TYPE The SBP profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.8 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRuleVxlanProfileName OBJECT-TYPE The VXLAN profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRuleProfile1 OBJECT-TYPE The profile name to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainMacRuleProfile2 OBJECT-TYPE The profile name to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.11 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainMacRuleProfile3 OBJECT-TYPE The profile name to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.12 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainMacRangeRuleTable OBJECT-TYPE A list of MAC range rules. This is used to match the MAC Address Range of a packet to a User Network Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17 | not-accessible | current | |
| alaDaUNPCustDomainMacRangeRuleEntry OBJECT-TYPE A MAC range rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1 | not-accessible | current | |
| alaDaUNPCustDomainMacRangeRuleDomainId OBJECT-TYPE The UNP Customer Domain ID for profile lookup. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| alaDaUNPCustDomainMacRangeRuleLoAddr OBJECT-TYPE The lower bound of MAC address range used for VLAN classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.2 | MacAddress | not-accessible | current |
| alaDaUNPCustDomainMacRangeRuleHiAddr OBJECT-TYPE The upper bound of MAC address range used for VLAN classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.3 | MacAddress | read-create | current |
| alaDaUNPCustDomainMacRangeRuleProfileName OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.4 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRangeRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. The range states the valid VLAN range in the system. VLAN Tag of 0 indicates no VLAN is associated. The VLAN tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.5 | Integer32 (0..4094) | read-create | current |
| alaDaUNPCustDomainMacRangeRuleRowStatus OBJECT-TYPE Row Status for creating/deleting rules. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.6 | RowStatus | read-create | current |
| alaDaUNPCustDomainMacRangeRuleMCLagConfigStatus OBJECT-TYPE Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.7 | AlaMultiChassisConfigStatus | read-only | current |
| alaDaUNPCustDomainMacRangeRuleSpbProfileName OBJECT-TYPE The SBP profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRangeRuleEdgeProfileName OBJECT-TYPE The Edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRangeRuleVxlanProfileName OBJECT-TYPE The VXLAN profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPCustDomainMacRangeRuleProfile1 OBJECT-TYPE The profile name to be appiled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.11 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainMacRangeRuleProfile2 OBJECT-TYPE The profile name to be appiled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.12 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainMacRangeRuleProfile3 OBJECT-TYPE The profile name to be appiled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.13 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaSaaProfileTable OBJECT-TYPE This table stores the SAA Performance Monitoring profiles that holds the Latency and Jitter Threshold of a network connection. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18 | not-accessible | current | |
| alaDaSaaProfileEntry OBJECT-TYPE Service Classification Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1 | not-accessible | current | |
| alaDaSaaProfileName OBJECT-TYPE The name of this profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaSaaProfileLatencyThreshold OBJECT-TYPE The object holds the Latency Threshold. A value of zero (0) means no threshold | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.4 | Integer32 (0..1000000) | read-create | current |
| alaDaSaaProfileJitterThreshold OBJECT-TYPE The object holds the Jitter Threshold. A value of zero (0) means no threshold | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.5 | Integer32 (0..1000000) | read-create | current |
| alaDaSaaProfileRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.6 | RowStatus | read-create | current |
| alaDaCPortalMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19 | |||
| alaDaCPortalGlobalConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1 | |||
| alaDaCPortalRedirectUrlName OBJECT-TYPE Name of the rediret URL that is used for accessing a public certificate. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.1 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaCPortalIpAddressType OBJECT-TYPE Address type of address associated with captive portal. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.2 | InetAddressType {ipv4(1), ipv6(2)} | read-write | current |
| alaDaCPortalIpAddress OBJECT-TYPE The factory default Captive Portal IP address is 10.123.0.1. If the 10.123.0.0 subnet is already in use, user can change the Captive Portal IP address to another 10.x.0.0 subnet. Only the second octet of the Captive Portal IP address can be changed. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.3 | InetAddress (SIZE(4 | 16)) | read-write | current |
| alaDaCPortalMode OBJECT-TYPE Captive Portal Mode | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.4 | INTEGER {internal(1), external(2), internalDhcp(3)} | read-write | current |
| alaDaCPortalSuccRedirectUrl OBJECT-TYPE Captive Portal's Redirect Url upon successful authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.5 | SnmpAdminString (SIZE(0..63)) | read-write | current |
| alaDaCPortalProxyPort OBJECT-TYPE Captive Portal's user defined proxy port number. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.6 | Integer32 (0 | 1024..49151) | read-write | current |
| alaDaCPortalRetryCnt OBJECT-TYPE Number of retries for the Captive Portal user to provide the user credential before the software will classify the user to the failed policy according the the alaCaptivePortalPolicy. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.7 | Integer32 (1..99) | read-write | current |
| alaDaCPortalPolicyListName OBJECT-TYPE Captive Portal Global Policy List Name | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.8 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaCPortalCustomization OBJECT-TYPE Captive Portal Customization | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.9 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaCPortalUNPProfile OBJECT-TYPE Captive Portal Global UNP Profile Name | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.10 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaCPortalUNPProfileChange OBJECT-TYPE Captive Portal Global UNP Profile Status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.11 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaCPortalDHCPLeaseTime OBJECT-TYPE Configures the DHCP lease time. The default value is 30 seconds. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.12 | Integer32 | read-write | current |
| alaDaCPortalDHCPRenewTime OBJECT-TYPE Configures the DHCP renew time. The default value is 15 seconds. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.13 | Integer32 | read-write | current |
| alaDaCPortalDHCPRebindingTime OBJECT-TYPE Configures DHCP rebinding time, default value is set to 22 seconds. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.1.14 | Integer32 | read-write | current |
| alaDaCPortalAuthPassTable OBJECT-TYPE Current Rate Limit Table On 8021x Port | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2 | not-accessible | current | |
| alaDaCPortalAuthPassEntry OBJECT-TYPE Captive Portal Auth Pass Enty | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1 | not-accessible | current | |
| alaDaCPortalAuthDomainName OBJECT-TYPE Captive Portal Authenticated Pass Domain Name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaCPortalAuthRealm OBJECT-TYPE Captive Portal Authenticated Pass Realm | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.2 | INTEGER {prefix(1), suffix(2)} | read-create | current |
| alaDaCPortalAuthPolicyListName OBJECT-TYPE Captive Portal Authenticated Policy List Name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaCPortalAuthRowStatus OBJECT-TYPE This object allows entries to be created and deleted in the table | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.4 | RowStatus | read-create | current |
| alaDaCPortalAuthUNPProfile OBJECT-TYPE Captive Portal Authenticated UNP Profile Name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaCPortalAuthUNPProfileChange OBJECT-TYPE Captive Portal Global UNP Profile Status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.6 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaCPortalProfTable OBJECT-TYPE Table contain Captive Portal profiles | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3 | not-accessible | current | |
| alaDaCPortalProfEntry OBJECT-TYPE Each entry defines Captive portal profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1 | not-accessible | current | |
| alaDaCPortalProfName OBJECT-TYPE Captive Portal Profile name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaCPortalProfMode OBJECT-TYPE Captive Portal Profile Mode | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.2 | INTEGER {internal(1), external(2)} | read-create | current |
| alaDaCPortalProfSuccRedirectUrl OBJECT-TYPE Captive Portal's Redirect Url upon successful authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.3 | SnmpAdminString (SIZE(0..63)) | read-create | current |
| alaDaCPortalProfRetryCnt OBJECT-TYPE Number of retries for the Captive Portal Profile to provide the user credential before the software will classify the user to the failed policy according the the alaCaptivePortalPolicy. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.4 | Integer32 (1..99) | read-create | current |
| alaDaCPortalProfAuthPolicyListName OBJECT-TYPE Captive Portal Profile Authenticated Pass Policy List Name | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaCPortalProfAaaProf OBJECT-TYPE Captive Portal Profile associated with AAA profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.6 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaCPortalProfRowStatus OBJECT-TYPE Row Status for initiating a MIB retrieval request. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.7 | RowStatus | read-create | current |
| alaDaCPortalProfUNPProfile OBJECT-TYPE UNP Profile associated with Captive Portal Profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaCPortalProfUNPProfileChange OBJECT-TYPE UNP Profile Status associated with Captive Portal Profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.9 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaCPortalProfDomainTable OBJECT-TYPE Table contain Captive Portal profiles domain specific policy list. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4 | not-accessible | current | |
| alaDaCPortalProfDomainEntry OBJECT-TYPE Each entry defines Captive portal profiles domain specific policy paramaters. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1 | not-accessible | current | |
| alaDaCPortalProfDomainAuthDomainName OBJECT-TYPE Captive Portal Profile Authenticated Domain Name | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaCPortalProfDomainAuthPolicyListName OBJECT-TYPE Captive Portal Profile Authenticated Pass Policy List Name | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaCPortalProfDomainAuthRealm OBJECT-TYPE Captive Portal Profile Authenticated Pass Realm | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.3 | INTEGER {prefix(1), suffix(2)} | read-create | current |
| alaDaCPortalProfDomainRowStatus OBJECT-TYPE This object allows entries to be created and deleted in the table | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.4 | RowStatus | read-create | current |
| alaDaCPortalProfDomainUNPProfile OBJECT-TYPE Captive Portal Profile Authenticated UNP Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaCPortalProfDomainUNPProfileChange OBJECT-TYPE Captive Portal Profile Authenticated UNP Profile Status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.6 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaHICMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20 | |||
| alaDaHICGlobalConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.1 | |||
| alaDaHICStatus OBJECT-TYPE HIC Status. The HIC server has to be configured before HIC can be enabled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaHICWebAgentDownloadUrl OBJECT-TYPE The URL for web agent download. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.1.2 | SnmpAdminString (SIZE(0..127)) | read-write | current |
| alaDaHICCustomHttpProxyPort OBJECT-TYPE The custom HTTP port for QoS to intercept the host's initial HTTP request. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.1.3 | Integer32 (1025..65535) | read-write | current |
| alaDaHICBgPollInterval OBJECT-TYPE Background-poll-interval provides time frequency in seconds for background polling packets. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.1.4 | Integer32 (16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240 | 256) | read-write | current |
| alaDaHICSvrFailMode OBJECT-TYPE The server-failure-mode specifies the policy to be followed in case both the servers are not reachable, value can be either passthrough or hold | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.1.5 | INTEGER {hold(1), passthrough(2)} | read-write | current |
| alaDaHICSvrTable OBJECT-TYPE This table shows current configuration for each HIC server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2 | not-accessible | current | |
| alaDaHICSvrEntry OBJECT-TYPE A HIC server configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1 | not-accessible | current | |
| alaDaHICSvrName OBJECT-TYPE Name of the server. This name is given by the operator to refer the server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.1 | SnmpAdminString (SIZE(1..31)) | not-accessible | current |
| alaDaHICSvrIpAddrType OBJECT-TYPE IP address of the server host. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.2 | InetAddressType {ipv4(1), ipv6(2)} | read-create | current |
| alaDaHICSvrIpAddr OBJECT-TYPE IP address of the server host. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.3 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaHICSvrPort OBJECT-TYPE For HIC server only. Port number for HIC request | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.4 | Integer32 (1025..65535) | read-create | current |
| alaDaHICSvrKey OBJECT-TYPE The shared secret is a string of characters known to the switch and to the HIC server. It is used to compute the digest to preserve the integrity between the HIC server and the AoS Switch. The secret is stored encrypted using a two way algorithm. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.5 | SnmpAdminString (SIZE(1..31)) | read-create | current |
| alaDaHICSvrStatus OBJECT-TYPE HIC server status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.6 | INTEGER {down(1), up(2)} | read-only | current |
| alaDaHICSvrRole OBJECT-TYPE Role of the server either primary or backup | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.7 | INTEGER {primary(1), backup(2)} | read-only | current |
| alaDaHICSvrConnection OBJECT-TYPE The server connection specifies the current mode of the server either active or inactive. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.8 | INTEGER {active(1), inactive(2)} | read-only | current |
| alaDaHICSvrRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.9 | RowStatus | read-create | current |
| alaDaHICAllowedTable OBJECT-TYPE This table contains the list of allowed/exception IP Addresses the the HIC hosts allowed to access during HIC. Those are the IP addresses of the Remediation/Patch servers, and the Web Agent Download server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3 | not-accessible | current | |
| alaDaHICAllowedEntry OBJECT-TYPE A Remediation server configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1 | not-accessible | current | |
| alaDaHICAllowedName OBJECT-TYPE Name of the server. This name is given by the operator to refer the server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.1 | SnmpAdminString (SIZE(1..31)) | not-accessible | current |
| alaDaHICAllowedIpAddrType OBJECT-TYPE IP address of the allowed entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.2 | InetAddressType {ipv4(1), ipv6(2)} | read-create | current |
| alaDaHICAllowedIpAddr OBJECT-TYPE IP address of the allowed entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.3 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaHICAllowedIpMaskType OBJECT-TYPE IP mask type of the allowed entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.4 | InetAddressType {ipv4(1), ipv6(2)} | read-create | current |
| alaDaHICAllowedIpMask OBJECT-TYPE IP Mask of the allowed entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.5 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaHICAllowedRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.6 | RowStatus | read-create | current |
| alaDaHICSvrFailPolicyTable OBJECT-TYPE This table shows current configuration for HIC server Fail Policy list mapping. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4 | not-accessible | current | |
| alaDaHICSvrFailPolicyEntry OBJECT-TYPE A HIC server Fail UNP configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1 | not-accessible | current | |
| alaDaHICSvrFailPolicyName OBJECT-TYPE The profile name which needs to be modified when the HIC server is down. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaHICSvrFailChangedPolicyName OBJECT-TYPE The profile name to which the host needs to be moved when the HIC server is down. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaHICSvrFailRowStatus OBJECT-TYPE Row Status for creating/deleting policy list name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1.3 | RowStatus | read-create | current |
| alaDaHICHostTable OBJECT-TYPE This table shows list of HIC Hosts and their active HIC status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5 | not-accessible | current | |
| alaDaHICHostEntry OBJECT-TYPE HIC Host status information. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5.1 | not-accessible | current | |
| alaDaHICHostMac OBJECT-TYPE Static MAC address index to each override entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5.1.1 | MacAddress | not-accessible | current |
| alaDaHICHostStatus OBJECT-TYPE HIC status of each HIC Host. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5.1.2 | INTEGER {inprogress(1), success(2), fail(3), timeout(4)} | read-only | current |
| alaDaUNPETmplTable OBJECT-TYPE Unp Edge Template Table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21 | not-accessible | deprecated | |
| alaDaUNPETmplEntry OBJECT-TYPE EdgeTemplate Entries. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1 | not-accessible | deprecated | |
| alaDaUNPETmplName OBJECT-TYPE UNP Edge Template name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | deprecated |
| alaDaUNPETmpl8021XAuthStatus OBJECT-TYPE Edge Template 802.1X Authenttication Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.2 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmpl8021XTxPeriodStatus OBJECT-TYPE Edge Template 802.1X Authentication tx-period configured or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.3 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmpl8021XTxPeriod OBJECT-TYPE Edge Template 802.1X Tx period . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.4 | Integer32 (1..60) | read-create | deprecated |
| alaDaUNPETmpl8021XSuppTimeoutStatus OBJECT-TYPE Edge Template 802.1X Authentication supp-timeout configured or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.5 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmpl8021XSuppTimeOut OBJECT-TYPE Edge Template 802.1X Authenttication Supp Timeout . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.6 | Integer32 (1..120) | read-create | deprecated |
| alaDaUNPETmpl8021XMaxReqStatus OBJECT-TYPE Edge Template 802.1X Authentication supp-timeout configured or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.7 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmpl8021XMaxReq OBJECT-TYPE Edge Template 802.1X Authenttication Max Req . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.8 | Integer32 (0..3) | read-create | deprecated |
| alaDaUNPETmpl8021XPassAltEProf OBJECT-TYPE 802.1X Auth Pass Alternate Edge Profile name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPETmplMacAuthStatus OBJECT-TYPE Edge Template Mac Authenttication Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.10 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmplMacPassAltEProf OBJECT-TYPE Mac Auth Pass Alternate Edge Profile name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.11 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPETmplClassifStatus OBJECT-TYPE Edge Template Classification Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.12 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmplDefEProf OBJECT-TYPE Edge Template default Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.13 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPETmplGroupId OBJECT-TYPE Associated Group ID . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.14 | Integer32 (0..255) | read-create | deprecated |
| alaDaUNPETmplAaaProf OBJECT-TYPE Associated Aaa Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.15 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPETmplRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.16 | RowStatus | read-create | deprecated |
| alaDaUNPETmplRedirectPortBounce OBJECT-TYPE Edge Template Classification Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.17 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmplFailurePolicy OBJECT-TYPE Failure Policy type. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.18 | INTEGER {default(1), macAuth(2)} | read-create | deprecated |
| alaDaUNPETmplBypassStatus OBJECT-TYPE Flag to indicate Bypass enable status on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.19 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmplMacAllowEap OBJECT-TYPE Flag to indicate Allow Eap on port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.20 | INTEGER {pass(1), fail(2), noauth(3), none(4)} | read-create | deprecated |
| alaDaUNPETmplAdminControlledDirections OBJECT-TYPE The current value of the administrative controlled directions parameter for the Port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.21 | INTEGER {both(1), in(2), noVal(3)} | read-create | deprecated |
| alaDaUNPETmplTrustTagStatus OBJECT-TYPE The flag to indicate whether the vlan tag in the incoming packet could be used for classifying the user when MAC authentication fails and classification rules dont match. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.22 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmplForceL3Learning OBJECT-TYPE UNP force L3 learning status on the Edge-Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.23 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPETmplForceL3LearningPortBounce OBJECT-TYPE Port-Bounce associated with UNP force L3 learning status on the Edge-Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.24 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfTable OBJECT-TYPE Unp Edge Profile Table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22 | not-accessible | deprecated | |
| alaDaUNPEdgeProfEntry OBJECT-TYPE Edge Profile Table Entries . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1 | not-accessible | deprecated | |
| alaDaUNPEdgeProfName OBJECT-TYPE UNP Edge Profile name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | deprecated |
| alaDaUNPEdgeProfQosPolicyList OBJECT-TYPE Associated Qos Policy List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.2 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPEdgeProfLocationPolicy OBJECT-TYPE Associated Edge Profile Location Policy Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPEdgeProfPeriodPolicy OBJECT-TYPE Associated Edge Profile Period Policy Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.4 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPEdgeProfHICStatus OBJECT-TYPE Edge Profile HIC Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.5 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfCPortalAuth OBJECT-TYPE Edge Profile Captive Portal Authentication Status. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.6 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfAuthStatus OBJECT-TYPE Edge Profile Authentication Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.7 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfMobileTag OBJECT-TYPE Edge Profile Mobile Tag . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.8 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfDHCPEnforcment OBJECT-TYPE Edge Profile Dhcp Enforcement . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.9 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfCPortalProf OBJECT-TYPE Associated Captive Portal Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPEdgeProfRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.11 | RowStatus | read-create | deprecated |
| alaDaUNPEdgeProfRedirectStatus OBJECT-TYPE Edge Profile Port bounce Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.12 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfKerberosStatus OBJECT-TYPE Edge Profile Kerberos Status . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.13 | INTEGER {enable(1), disable(2)} | read-create | deprecated |
| alaDaUNPEdgeProfMaxIngressBw OBJECT-TYPE Maximum Ingress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile. If value is set to -1, then the Ingress Bandwidth specified for the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.14 | Integer32 (-1 | 0..2147483647) | read-create | deprecated |
| alaDaUNPEdgeProfMaxEgressBw OBJECT-TYPE Maximum Egress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile. If value is set to -1, then the Egress Bandwidth specified for the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.15 | Integer32 (-1 | 0..2147483647) | read-create | deprecated |
| alaDaUNPEdgeProfMaxIngressDepth OBJECT-TYPE Maximum Ingress Depth associated to Bandwidth. If set to 0, then the Depth associated with the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.16 | Integer32 (-1 | 0..16384) | read-create | deprecated |
| alaDaUNPEdgeProfMaxEgressDepth OBJECT-TYPE Maximum Egress Depth associated to Bandwidth. If set to 0, then the Depth associated with the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.17 | Integer32 (-1 | 0..16384) | read-create | deprecated |
| alaDaUNPPortRuleTable OBJECT-TYPE Unp Port Rule Table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23 | not-accessible | current | |
| alaDaUNPPortRuleEntry OBJECT-TYPE PortRule Table Entries . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1 | not-accessible | current | |
| alaDaUNPPortRuleNum OBJECT-TYPE ifIndex . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.1 | InterfaceIndex | not-accessible | current |
| alaDaUNPPortRuleEdgeProf OBJECT-TYPE Associated Edge Profile Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.2 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPPortRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.3 | RowStatus | read-create | current |
| alaDaUNPPortRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.4 | Integer32 (0..4094) | read-create | current |
| alaDaUNPPortRuleProfile1 OBJECT-TYPE Associated Profile Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortRuleProfile2 OBJECT-TYPE Associated Profile Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.6 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortRuleProfile3 OBJECT-TYPE Associated Profile Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.7 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPGroupRuleTable OBJECT-TYPE Based on Group id , Edge Profile Classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24 | not-accessible | deprecated | |
| alaDaUNPGroupRuleEntry OBJECT-TYPE Group Rule Table Entries . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1 | not-accessible | deprecated | |
| alaDaUNPGroupRuleId OBJECT-TYPE Group Id . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.1 | Integer32 (1..255) | not-accessible | deprecated |
| alaDaUNPGroupRuleEdgeProf OBJECT-TYPE Associated Edge Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.2 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPGroupRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.3 | RowStatus | read-create | deprecated |
| alaDaUNPGroupRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.4 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPMacOuiRuleTable OBJECT-TYPE A list of MAC Oui rules. This is used to match the MAC Oui of a packet to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25 | not-accessible | current | |
| alaDaUNPMacOuiRuleEntry OBJECT-TYPE A MAC rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1 | not-accessible | current | |
| alaDaUNPMacOuiRuleAddr OBJECT-TYPE The MAC Oui address used for classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.1 | MacOui | not-accessible | current |
| alaDaUNPMacOuiRuleEdgeProfile OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacOuiRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.3 | RowStatus | read-create | current |
| alaDaUNPMacOuiRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.4 | Integer32 (0..4094) | read-create | current |
| alaDaUNPMacOuiRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPMacOuiRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.6 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPMacOuiRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.7 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPEndPoinRuleTable OBJECT-TYPE A list of End point rules. This is used to match the lldp med-endpoint of a packet to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26 | not-accessible | current | |
| alaDaUNPEndPoinRuleEntry OBJECT-TYPE A MAC rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1 | not-accessible | current | |
| alaDaUNPEndPoinRuleId OBJECT-TYPE End Point Identifier . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.1 | INTEGER {ipPhone(1), accessPoint(2)} | not-accessible | current |
| alaDaUNPEndPoinEdgeProfile OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPEndPoinRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.3 | RowStatus | read-create | current |
| alaDaUNPEndPoinProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.4 | SnmpAdminString (SIZE(0 | 1..32)) | read-create | current |
| alaDaUNPEndPoinProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.5 | SnmpAdminString (SIZE(0 | 1..32)) | read-create | current |
| alaDaUNPEndPoinProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.6 | SnmpAdminString (SIZE(0 | 1..32)) | read-create | current |
| alaDaUNPEndPoinVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.7 | Integer32 (0..4094) | read-create | current |
| alaDaUNPAuthRuleTable OBJECT-TYPE A list of Auth rules. This is used to match authentication type to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27 | not-accessible | current | |
| alaDaUNPAuthRuleEntry OBJECT-TYPE Auth based rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1 | not-accessible | current | |
| alaDaUNPAuthRuleType OBJECT-TYPE Auth Rule Identifier . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.1 | INTEGER {none(1), dot1x(2), mac(3), dot1xFail(4), macFail(5), noAuth(6)} | not-accessible | current |
| alaDaUNPAuthRuleEdgeProfile OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPAuthRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.3 | RowStatus | read-create | current |
| alaDaUNPAuthRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.4 | Integer32 (0..4094) | read-create | current |
| alaDaUNPAuthRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.5 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPAuthRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.6 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPAuthRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.7 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPClassifRuleTable OBJECT-TYPE A list of Calssification rules. This is used to match classification rule to a User Network Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28 | not-accessible | current | |
| alaDaUNPClassifRuleEntry OBJECT-TYPE Classification rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1 | not-accessible | current | |
| alaDaUNPClassifRuleName OBJECT-TYPE Classification Rule Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPClassifRulePrecedenceNum OBJECT-TYPE Classification Rule Precedence number . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.2 | Integer32 (1..255) | read-create | current |
| alaDaUNPClassifRuleEdgeProfile OBJECT-TYPE Classification Rule Edge ProfileName . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPClassifRulePort OBJECT-TYPE Classification Rule port . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.4 | InterfaceIndexOrZero | read-create | current |
| alaDaUNPClassifRulePortHigh OBJECT-TYPE Classification Rule port . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.5 | InterfaceIndexOrZero | read-create | current |
| alaDaUNPClassifRuleGroupId OBJECT-TYPE Classification Rule Group Id. Value of -1 indicates uncofiguring the previously configured groupId value . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.6 | Integer32 (-1..255) | read-create | deprecated |
| alaDaUNPClassifRuleMacAddr OBJECT-TYPE Classification Rule mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.7 | MacAddress | read-create | current |
| alaDaUNPClassifRuleMacRngLoaddr OBJECT-TYPE Classification Rule mac Address Range starting address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.8 | MacAddress | read-create | current |
| alaDaUNPClassifRuleMacRngHiaddr OBJECT-TYPE Classification Rule mac Address Range ending address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.9 | MacAddress | read-create | current |
| alaDaUNPClassifRuleMacOuiAddr OBJECT-TYPE Classification Rule mac oui address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.10 | OCTET STRING (SIZE(0 | 3)) | read-create | current |
| alaDaUNPClassifRuleEndPoin OBJECT-TYPE End Point Identifier . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.11 | INTEGER {none(0), ipPhone(1), accessPoint(2)} | read-create | current |
| alaDaUNPClassifRuleAuthType OBJECT-TYPE Classification Rule Auth Type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.12 | INTEGER {none(0), noAuth(1), dot1x(2), mac(3), dot1xFail(4), macFail(5)} | read-create | current |
| alaDaUNPClassifRuleIpAddressType OBJECT-TYPE The IP address type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.13 | InetAddressType | read-create | current |
| alaDaUNPClassifRuleIpAddress OBJECT-TYPE Classification Rule Ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.14 | InetAddress | read-create | current |
| alaDaUNPClassifRuleIpMaskType OBJECT-TYPE The IP Mask type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.15 | InetAddressType | read-create | current |
| alaDaUNPClassifRuleIpMask OBJECT-TYPE Classification Rule Ip Mask. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.16 | InetAddress | read-create | current |
| alaDaUNPClassifRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.17 | RowStatus | read-create | current |
| alaDaUNPClassifRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. Value of -1 indicates unconfiguring of the previously configured VLAN-Tag. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.18 | Integer32 (-1 | 0..4094) | read-create | current |
| alaDaUNPClassifRuleCustomerDomain OBJECT-TYPE Classification Rule Customer Domain. Value of -1 indicates uncofiguring the previously configured customer domain value . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.19 | Integer32 (-1 | 0..2147483647) | read-create | current |
| alaDaUNPClassifRuleProfile1 OBJECT-TYPE Profile with priority 1 associated with the Classification Rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.20 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPClassifRuleProfile2 OBJECT-TYPE Profile with priority 2 associated with the Classification Rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.21 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPClassifRuleProfile3 OBJECT-TYPE Profile with priority 3 associated with the Classification Rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.22 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPClassifRuleDeviceType OBJECT-TYPE Device type associates with the Classification Rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.23 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPMacPortRuleTable OBJECT-TYPE Mac Address & port classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29 | not-accessible | current | |
| alaDaUNPMacPortRuleEntry OBJECT-TYPE Mac & port based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1 | not-accessible | current | |
| alaDaUNPMacPortRuleMacAddr OBJECT-TYPE Classification Rule mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.1 | MacAddress (SIZE(6)) | not-accessible | current |
| alaDaUNPMacPortRuleNum OBJECT-TYPE Classification Rule Port num. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.2 | InterfaceIndex (1..2147483647) | not-accessible | current |
| alaDaUNPMacPortRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacPortRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.4 | RowStatus | read-create | current |
| alaDaUNPMacPortRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.5 | Integer32 (0..4094) | read-create | current |
| alaDaUNPMacPortRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.6 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPMacPortRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.7 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPMacPortRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.8 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPIpPortRuleTable OBJECT-TYPE Ip Address & port classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30 | not-accessible | current | |
| alaDaUNPIpPortRuleEntry OBJECT-TYPE Ip & port based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1 | not-accessible | current | |
| alaDaUNPIpPortRuleAddrType OBJECT-TYPE The IP address type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.1 | InetAddressType | not-accessible | current |
| alaDaUNPIpPortRuleAddr OBJECT-TYPE The IP network address . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.2 | InetAddress | not-accessible | current |
| alaDaUNPIpPortRuleNum OBJECT-TYPE Classification Rule Port num. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.3 | InterfaceIndex (1..2147483647) | not-accessible | current |
| alaDaUNPIpPortRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.4 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPIpPortRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.5 | RowStatus | read-create | current |
| alaDaUNPIpPortRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.6 | Integer32 (0..4094) | read-create | current |
| alaDaUNPIpPortRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.7 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPIpPortRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPIpPortRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPIpPortRuleMaskType OBJECT-TYPE The IP mask type. This field is mandatory. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.10 | InetAddressType {ipv4(1), ipv6(2)} | read-create | current |
| alaDaUNPIpPortRuleMask OBJECT-TYPE The IP network mask applying to the IP network address. This field is mandatory. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.11 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaUNPMacIpPortRuleTable OBJECT-TYPE Mac, Ip Address & port classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31 | not-accessible | current | |
| alaDaUNPMacIpPortRuleEntry OBJECT-TYPE Mac, Ip & port based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1 | not-accessible | current | |
| alaDaUNPMacIpPortRuleMacAddr OBJECT-TYPE Classification Rule mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.1 | MacAddress (SIZE(6)) | not-accessible | current |
| alaDaUNPMacIpPortRuleAddrIpType OBJECT-TYPE The IP address type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.2 | InetAddressType | not-accessible | current |
| alaDaUNPMacIpPortRuleIpAddr OBJECT-TYPE The IP network address . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.3 | InetAddress | not-accessible | current |
| alaDaUNPMacIpPortRuleNum OBJECT-TYPE Classification Rule Port num. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.4 | InterfaceIndex (1..2147483647) | not-accessible | current |
| alaDaUNPMacIpPortRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.5 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacIpPortRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.6 | RowStatus | read-create | current |
| alaDaUNPMacIpPortRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.7 | Integer32 (0..4094) | read-create | current |
| alaDaUNPMacIpPortRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPMacIpPortRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPMacIpPortRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPMacIpPortRuleIpMaskType OBJECT-TYPE The IP mask type. This field is mandatory. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.11 | InetAddressType {ipv4(1), ipv6(2)} | read-create | current |
| alaDaUNPMacIpPortRuleIpMask OBJECT-TYPE The IP network mask applying to the IP network address. This field is mandatory. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.12 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaUNPMacGroupRuleTable OBJECT-TYPE Mac Address & Group classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32 | not-accessible | deprecated | |
| alaDaUNPMacGroupRuleEntry OBJECT-TYPE Mac & group based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1 | not-accessible | deprecated | |
| alaDaUNPMacGroupRuleAddr OBJECT-TYPE Classification Rule mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.1 | MacAddress (SIZE(6)) | not-accessible | deprecated |
| alaDaUNPMacGroupRuleId OBJECT-TYPE Classification Rule Group Id. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.2 | Integer32 (0..255) | not-accessible | deprecated |
| alaDaUNPMacGroupRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacGroupRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.4 | RowStatus | read-create | deprecated |
| alaDaUNPMacGroupRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.5 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPIpGroupRuleTable OBJECT-TYPE Ip Address & Group classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33 | not-accessible | deprecated | |
| alaDaUNPIpGroupRuleEntry OBJECT-TYPE Ip & Group based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1 | not-accessible | deprecated | |
| alaDaUNPIpGroupRuleAddrType OBJECT-TYPE The IP address type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.1 | InetAddressType | not-accessible | deprecated |
| alaDaUNPIpGroupRuleAddr OBJECT-TYPE The IP network address . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.2 | InetAddress | not-accessible | deprecated |
| alaDaUNPIpGroupRuleNum OBJECT-TYPE Classification Rule Group num. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.3 | Integer32 (0..255) | not-accessible | deprecated |
| alaDaUNPIpGroupRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.4 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPIpGroupRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.5 | RowStatus | read-create | deprecated |
| alaDaUNPIpGroupRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.6 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPMacIpGroupRuleTable OBJECT-TYPE Mac Address,IP & Group classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34 | not-accessible | deprecated | |
| alaDaUNPMacIpGroupRuleEntry OBJECT-TYPE Mac Ip & group based classification rule entries . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1 | not-accessible | deprecated | |
| alaDaUNPMacIpGroupRuleMacAddr OBJECT-TYPE Classification Rule mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.1 | MacAddress (SIZE(6)) | not-accessible | deprecated |
| alaDaUNPMacIpGroupRuleIpAddrType OBJECT-TYPE The IP address type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.2 | InetAddressType | not-accessible | deprecated |
| alaDaUNPMacIpGroupRuleIpAddr OBJECT-TYPE The IP network address . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.3 | InetAddress | not-accessible | deprecated |
| alaDaUNPMacIpGroupRuleId OBJECT-TYPE Classification Rule Group Id. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.4 | Integer32 (0..255) | not-accessible | deprecated |
| alaDaUNPMacIpGroupRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.5 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacIpGroupRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.6 | RowStatus | read-create | deprecated |
| alaDaUNPMacIpGroupRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.7 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPUserRoleTable OBJECT-TYPE User Role Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35 | not-accessible | current | |
| alaDaUNPUserRoleEntry OBJECT-TYPE User Role Name based rule entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1 | not-accessible | current | |
| alaDaUNPUserRoleName OBJECT-TYPE User Role Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPUserRolePrecedenceNum OBJECT-TYPE User Role Precedence number . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.2 | Integer32 (1..255) | read-create | current |
| alaDaUNPUserRolePolicyList OBJECT-TYPE User Role Policy List Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPUserRoleEdgeProfile OBJECT-TYPE User Role Edge ProfileName . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.4 | SnmpAdminString (SIZE(0..32)) | read-create | deprecated |
| alaDaUNPUserRoleAuthType OBJECT-TYPE User Rule Auth Type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.5 | INTEGER {noAuth(0), none(1), dot1x(2), mac(3), dot1xFail(4), macFail(5)} | read-create | current |
| alaDaUNPUserRolePostLoginStatus OBJECT-TYPE Enable/Disable Captive Portal Post Login Status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.6 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPUserRoleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.7 | RowStatus | read-create | current |
| alaDaUNPUserRoleKerberosPostLoginStatus OBJECT-TYPE Enable/Disable Kerberos Post Login Status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.8 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPUserRoleProfile1 OBJECT-TYPE User Role ProfileName . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPUserRoleProfile2 OBJECT-TYPE User Role ProfileName . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPUserRoleProfile3 OBJECT-TYPE User Role ProfileName . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.11 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPRstrctedRoleTable OBJECT-TYPE Restricted Role Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36 | not-accessible | current | |
| alaDaUNPRstrctedRoleEntry OBJECT-TYPE Entry identified by Restricted Role . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1 | not-accessible | current | |
| alaDaUNPRstrctedRoleType OBJECT-TYPE Unp Restricted Roles . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1.1 | INTEGER {unauthorized(1), hic(2), qmr(3), blacklist(4), cpPreLogin(5), kerberosPreLogin(6)} | not-accessible | current |
| alaDaUNPRstrctedRolePolicyList OBJECT-TYPE Restricted Role Policy List Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPRstrctedRoleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1.3 | RowStatus | read-create | current |
| alaDaUNPVlanMapTable OBJECT-TYPE Vlan/Unp Mapping Table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37 | not-accessible | deprecated | |
| alaDaUNPVlanMapEntry OBJECT-TYPE Entry identified by Edge Profile Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1 | not-accessible | deprecated | |
| alaDaUNPVlanMapEdgeProf OBJECT-TYPE Edge Profile Name . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | deprecated |
| alaDaUNPVlanMapIdent OBJECT-TYPE Vlan Identifier which is mapped to Edge profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1.2 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPVlanMapRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1.3 | RowStatus | read-create | deprecated |
| alaDaUnpGroupIdTable OBJECT-TYPE This table creates and deletes the UNP group within a switch. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38 | not-accessible | deprecated | |
| alaDaUnpGroupIdEntry OBJECT-TYPE UNP GroupId entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1 | not-accessible | deprecated | |
| alaDaUnpGroupId OBJECT-TYPE Unp Group Id. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1.1 | Integer32 (0..255) | not-accessible | deprecated |
| alaDaUnpGroupDescription OBJECT-TYPE Unp Group Id. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1.2 | SnmpAdminString (SIZE(0..128)) | read-create | deprecated |
| alaDaUnpGroupIdRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1.3 | RowStatus | read-create | deprecated |
| alaDaUNPEdgeFlushTable OBJECT-TYPE Port, LinkAgg, Mac, Edge User Type Based Flush Table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39 | not-accessible | current | |
| alaDaUNPEdgeFlushEntry OBJECT-TYPE One entry to flush edge users on the basis of user criteria. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1 | not-accessible | current | |
| alaDaUNPEdgeFlushIndex OBJECT-TYPE Interface index . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.1 | Integer32 (1) | not-accessible | current |
| alaDaUNPEdgeFlushPortLow OBJECT-TYPE Edge Flush Port Criteria . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.2 | InterfaceIndex | read-write | current |
| alaDaUNPEdgeFlushPortHigh OBJECT-TYPE Edge Flush Port Criteria . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.3 | InterfaceIndex | read-write | current |
| alaDaUNPEdgeFlushType OBJECT-TYPE Edge Flush Type criteria . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.4 | INTEGER {noAuth(1), onex(2), mac(3), none(4)} | read-write | current |
| alaDaUNPEdgrFlushMac OBJECT-TYPE Edge Flush MAC criteria . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.5 | MacAddress (SIZE(6)) | read-write | current |
| alaDaUNPEdgeFlushComplete OBJECT-TYPE To flush all Edge Users . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.6 | INTEGER {no(1), all(2)} | read-write | current |
| alaDaUNPEdgeFlushProfile OBJECT-TYPE To flush all Edge Users in the given Edge-Profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.7 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPMacRulesTable OBJECT-TYPE Mac Address classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40 | not-accessible | deprecated | |
| alaDaUNPMacRulesEntry OBJECT-TYPE Mac based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1 | not-accessible | deprecated | |
| alaDaUNPMacRulesMacAddr OBJECT-TYPE Classification Rule mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.1 | MacAddress (SIZE(6)) | not-accessible | deprecated |
| alaDaUNPMacRulesEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.2 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacRulesRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.3 | RowStatus | read-create | deprecated |
| alaDaUNPMacRulesVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.4 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPMacRangeTable OBJECT-TYPE Mac Address classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41 | not-accessible | deprecated | |
| alaDaUNPMacRangeEntry OBJECT-TYPE Mac based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1 | not-accessible | deprecated | |
| alaDaUNPMacRangeStartMacAddr OBJECT-TYPE Classification Rule start mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.1 | MacAddress (SIZE(6)) | not-accessible | deprecated |
| alaDaUNPMacRangeEndMacAddr OBJECT-TYPE Classification Rule end mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.2 | MacAddress (SIZE(6)) | read-create | deprecated |
| alaDaUNPMacRangeEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPMacRangeRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.4 | RowStatus | read-create | deprecated |
| alaDaUNPMacRangeVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.5 | Integer32 (0..4094) | read-create | deprecated |
| alaDaUNPIpMaskRuleTable OBJECT-TYPE Ip Address & port classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42 | not-accessible | deprecated | |
| alaDaUNPIpMaskRuleEntry OBJECT-TYPE Ip & Mask based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1 | not-accessible | deprecated | |
| alaDaUNPIpMaskRuleAddrType OBJECT-TYPE The IP address type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.1 | InetAddressType | not-accessible | deprecated |
| alaDaUNPIpMaskRuleAddr OBJECT-TYPE The IP network address . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.2 | InetAddress | not-accessible | deprecated |
| alaDaUNPIpMaskRuleMaskType OBJECT-TYPE The IP mask type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.3 | InetAddressType | not-accessible | deprecated |
| alaDaUNPIpMaskRuleMask OBJECT-TYPE The IP network mask. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.4 | InetAddress | not-accessible | deprecated |
| alaDaUNPIpMaskRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.5 | SnmpAdminString (SIZE(1..32)) | read-create | deprecated |
| alaDaUNPIpMaskRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.6 | RowStatus | read-create | deprecated |
| alaDaUNPIpMaskRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.7 | Integer32 (0..4094) | read-create | deprecated |
| alaDaQMRMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43 | |||
| alaDaQMRGlobalConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.1 | |||
| alaDaQMRPage OBJECT-TYPE Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaQMRPath OBJECT-TYPE Default path for remediation server redirect. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.1.2 | SnmpAdminString (SIZE(0..255)) | read-write | current |
| alaDaQMRCustomHttpProxyPort OBJECT-TYPE The custom HTTP port for QoS to intercept the host's initial HTTP request. If set to 0 then custom HTTP port will be reset to its default value 8080. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.1.3 | Integer32 (0 | 1025..65535) | read-write | current |
| alaDaQMRPolicyList OBJECT-TYPE The name of the policy associated with QMR. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.1.4 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaQMRAllowedTable OBJECT-TYPE This table shows the list of IP addresses the host can communicate with when it is in quarantined state. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2 | not-accessible | current | |
| alaDaQMRAllowedEntry OBJECT-TYPE Entry of the IP address the host can communicate with when it is in quarantined state.. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1 | not-accessible | current | |
| alaDaQMRAllowedName OBJECT-TYPE Allowed name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.1 | SnmpAdminString (SIZE(0..32)) | not-accessible | current |
| alaDaQMRAllowedIpAddrType OBJECT-TYPE IP address type of the IP Adddress that is allowed. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.2 | InetAddressType | read-create | current |
| alaDaQMRAllowedIpAddr OBJECT-TYPE The IP address that is allowed to access. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.3 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaQMRAllowedIpMaskType OBJECT-TYPE IP mask type of the allowed entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.4 | InetAddressType | read-create | current |
| alaDaQMRAllowedIpMask OBJECT-TYPE IP Mask of the allowed entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.5 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaQMRAllowedRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.6 | RowStatus | read-create | current |
| alaDaUNPValidityPeriodTable OBJECT-TYPE Table of UNP ValidityPeriod definitions | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44 | not-accessible | current | |
| alaDaUNPValidityPeriodEntry OBJECT-TYPE Definition of UNP ValidityPeriod | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1 | not-accessible | current | |
| alaDaUNPValidityPeriodName OBJECT-TYPE Name of validity period | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPValidityPeriodDays OBJECT-TYPE Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.2 | Integer32 | read-create | current |
| alaDaUNPValidityPeriodDaysStatus OBJECT-TYPE Status field indicating whether the validity period has specific active days of the month. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.3 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaDaUNPValidityPeriodMonths OBJECT-TYPE Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.4 | Integer32 | read-create | current |
| alaDaUNPValidityPeriodMonthsStatus OBJECT-TYPE Status field indicating whether the validity period has specific active days of the week. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.5 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaDaUNPValidityPeriodHour OBJECT-TYPE Time of day this period becomes active. Format is 'hh:mm' | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.6 | SnmpAdminString (SIZE(0..7)) | read-create | current |
| alaDaUNPValidityPeriodHourStatus OBJECT-TYPE Status field indicating whether the validity period has specific active hours of the day. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.7 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaDaUNPValidityPeriodEndHour OBJECT-TYPE Time of day this period becomes inactive. Format is 'hh:mm' | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.8 | SnmpAdminString (SIZE(0..7)) | read-create | current |
| alaDaUNPValidityPeriodInterval OBJECT-TYPE Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm' | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.9 | SnmpAdminString (SIZE(0..19)) | read-create | current |
| alaDaUNPValidityPeriodIntervalStatus OBJECT-TYPE Status field indicating whether the validity period has a specific active date-time interval. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.10 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaDaUNPValidityPeriodEndInterval OBJECT-TYPE Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm' | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.11 | SnmpAdminString (SIZE(0..19)) | read-create | current |
| alaDaUNPValidityPeriodTimezone OBJECT-TYPE Timezone in which the policy's time has to be interpreted. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.12 | INTEGER {nzst(1), zp11(2), aest(3), gst(4), acst(5), kst(6), jst(7), awst(8), zp8(9), zp7(10), zp6(11), ist(12), zp5(13), zp4(14), msk(15), eet(16), cet(17), met(18), bst(19), wat(20), utc(21), gmt(22), wet(23), zm2(24), zm3(25), nst(26), ast(27), astcam(28), est(29), estcam(30), cst(31), cstcam(32), mst(33), mstcam(34), pst(35), pstcam(36), akst(37), hst(38), zm11(39)} | read-create | current |
| alaDaUNPValidityPeriodTimezoneStatus OBJECT-TYPE Status field indicating whether the validity period has specific timezone enabled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.13 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaDaUNPValidityPeriodActiveStatus OBJECT-TYPE Status field indicating whether the validity period is currently active in the system so that Access Guardian will utilize it for Time-based Policy checks. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.14 | INTEGER {active(1), inactive(2)} | read-only | current |
| alaDaUNPValidityPeriodRowStatus OBJECT-TYPE Used to create/delete validity periods according to the RowStatus convention | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.15 | RowStatus | read-create | current |
| alaDaUNPLocationPolicyTable OBJECT-TYPE Table of UNP Location Policy definitions | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45 | not-accessible | current | |
| alaDaUNPLocationPolicyEntry OBJECT-TYPE Definition of UNP Location Policy | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1 | not-accessible | current | |
| alaDaUNPLocationPolicyName OBJECT-TYPE Name of the Location Policy | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPLocationPolicyPort OBJECT-TYPE Specifies the port criterion | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.2 | InterfaceIndex | read-create | current |
| alaDaUNPLocationPolicyPortHigh OBJECT-TYPE Specifies the upper bound of the port criterion | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.3 | InterfaceIndex | read-create | current |
| alaDaUNPLocationPolicyPortStatus OBJECT-TYPE This object has to be set to ENABLE when the ports form one of the criteria for the location policy. It should be set to DISABLE when the ports are to be removed. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.4 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPLocationPolicySystemName OBJECT-TYPE System Name criterion of the Location Policy | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.5 | SnmpAdminString (SIZE(0..64)) | read-create | current |
| alaDaUNPLocationPolicySystemLocation OBJECT-TYPE System Location criterion of the Location Policy | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.6 | SnmpAdminString (SIZE(0..31)) | read-create | current |
| alaDaUNPLocationPolicyRowStatus OBJECT-TYPE Used to create/delete location policies according to the RowStatus convention | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.7 | RowStatus | read-create | current |
| alaDaUNPLocationPolicyDomainId OBJECT-TYPE The Domain ID of the Location Policy. The range domain id supported is 0-511. When domainId is it set to -1, it is considered to be not configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.8 | Integer32 (-1 | 0..511) | read-create | current |
| alaDaUNPRedirectAllowedServerTable OBJECT-TYPE Table of UNP Redirect Allowed Server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46 | not-accessible | current | |
| alaDaUNPRedirectAllowedServerEntry OBJECT-TYPE Definition of UNP Redirect Allowed Server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1 | not-accessible | current | |
| alaDaUNPRedirectAllowedServerName OBJECT-TYPE Name of Redirect Allowed Server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPRedirectAllowedServerIPType OBJECT-TYPE IP Address Type IPV4/IPV6 of Redirect server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.2 | InetAddressType | read-create | current |
| alaDaUNPRedirectAllowedServerIP OBJECT-TYPE IP Address of Redirect server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.3 | InetAddress | read-create | current |
| alaDaUNPRedirectAllowedMaskIPType OBJECT-TYPE IP Mask Type IPV4/IPV6 of Redirect server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.4 | InetAddressType | read-create | current |
| alaDaUNPRedirectAllowedMaskIP OBJECT-TYPE IP Mask Address of Redirect server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.5 | InetAddress | read-create | current |
| alaDaUNPRedirectAllowedRowStatus OBJECT-TYPE ROwStatus Implies deleting/adding Entry to Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.6 | RowStatus | read-create | current |
| alaDaMacVlanUserExtTable OBJECT-TYPE Extension to alaDaMacVlanUserTable to support number of applications. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47 | not-accessible | current | |
| alaDaMacVlanUserExtEntry OBJECT-TYPE Non 802.1x supplicant information. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1 | not-accessible | current | |
| alaDaMacVlanUserExtIntfNum OBJECT-TYPE The ifIndex representing the slot and port where the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.1 | InterfaceIndex | not-accessible | current |
| alaDaMacVlanUserExtMACAddress OBJECT-TYPE The MAC address of the non 802.1x supplicant. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.2 | MacAddress | not-accessible | current |
| alaDaMacVlanUserExtVlanID OBJECT-TYPE The Id of the VLAN on which the non 802.1x supplicant is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.3 | Integer32 (1..4096) | not-accessible | current |
| alaDaMacVlanUserExtAppID OBJECT-TYPE to indicate the application number or ID. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.4 | Unsigned32 (0..32) | not-accessible | current |
| alaDaMacVlanUserExtAppName OBJECT-TYPE Applications added to the non 802.1x supplicant | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.5 | SnmpAdminString | read-only | current |
| alaDaUNPVxlanProfileTable OBJECT-TYPE This table stores the Service Classification profiles created in the system. The entries provides information to classify device in the VXLAN Service domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48 | not-accessible | obsolete | |
| alaDaUNPVxlanProfileEntry OBJECT-TYPE VXLAN Service Classification Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1 | not-accessible | obsolete | |
| alaDaUNPVxlanProfileName OBJECT-TYPE The name of the profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | obsolete |
| alaDaUNPVxlanProfileEncapVal OBJECT-TYPE The encapsulation to be used for the SAP connecting to the service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.2 | TmnxEncapVal | read-create | obsolete |
| alaDaUNPVxlanProfileVnid OBJECT-TYPE The object represnet the VNID that is to be used to dynamically create a VXLAN service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.3 | Unsigned32 (1..16777214) | read-create | obsolete |
| alaDaUNPVxlanProfileQosPolicyListName OBJECT-TYPE The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.4 | SnmpAdminString (SIZE(0..32)) | read-create | obsolete |
| alaDaUNPVxlanProfileFarEndIPListName OBJECT-TYPE The name of the Far End IP List that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | obsolete |
| alaDaUNPVxlanProfileMulticastIPAddressType OBJECT-TYPE The IP address type of the multicast group IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.6 | InetAddressType | read-create | obsolete |
| alaDaUNPVxlanProfileMulticastIPAddress OBJECT-TYPE The multicast group IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.7 | InetAddress | read-create | obsolete |
| alaDaUNPVxlanProfileSapVlanXlation OBJECT-TYPE To enable/disable the vlan translation for all the SAPs configured in this service if the corresponding access ports for the SAPs also has the vlan translation enabled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.8 | INTEGER {enable(1), disable(2)} | read-create | obsolete |
| alaDaUNPVxlanProfileMobileTagStatus OBJECT-TYPE VXLAN Profile Mobile Tag status. When enabled, the packets egressing out on the SAP will be tagged. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.9 | INTEGER {enable(1), disable(2)} | read-create | obsolete |
| alaDaUNPVxlanProfileMulticastMode OBJECT-TYPE To configure the multicast replication mode for each service: Head-end(1) where a non-unicast packet entering the SAP port is replicated once for each receiver in the b-domain using its unicast BMAC. Tandem(2) where a non-unicast packet entering the SAP port is replicated once at each node using the multicast group address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.10 | INTEGER {headend(1), tandem(2), hybrid(3)} | read-create | obsolete |
| alaDaUNPVxlanProfileRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.11 | RowStatus | read-create | obsolete |
| alaDaUNPVxlanFlushTable OBJECT-TYPE Table to flush the VXLAN access users based on some criteria such as MAC Address, Authentication Type, SAP, Service and/or Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49 | not-accessible | obsolete | |
| alaDaUNPVxlanFlushEntry OBJECT-TYPE One entry to flush VXLAN access users on the basis of user criteria. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1 | not-accessible | obsolete | |
| alaDaUNPVxlanFlushIndex OBJECT-TYPE Flush index. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.1 | Unsigned32 | not-accessible | obsolete |
| alaDaUNPVxlanFlushComplete OBJECT-TYPE Flush all users learnt on all VXLAN-access type ports. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.2 | INTEGER {none(1), all(2)} | read-write | obsolete |
| alaDaUNPVxlanFlushAuthType OBJECT-TYPE Flush based on the authentication type of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.3 | INTEGER {noAuth(1), onex(2), mac(3)} | read-write | obsolete |
| alaDaUNPVxlanFlushMacAddress OBJECT-TYPE Flush based on a single MAC address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.4 | MacAddress (SIZE(6)) | read-write | obsolete |
| alaDaUNPVxlanFlushSapIDIfIndex OBJECT-TYPE Flush the users learnt on the given SAP-ID Interface Index. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.5 | InterfaceIndex | read-write | obsolete |
| alaDaUNPVxlanFlushSapIDEncapVal OBJECT-TYPE Flush the users learnt on the given SAP-ID Encapsulation. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.6 | TmnxEncapVal | read-write | obsolete |
| alaDaUNPVxlanFlushServiceID OBJECT-TYPE Flush the users learnt of the given VXLAN service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.7 | Unsigned32 | read-write | obsolete |
| alaDaUNPVxlanFlushVxlanProfile OBJECT-TYPE Flush the users learnt on the given VXLAN Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.8 | SnmpAdminString (SIZE(0..32)) | read-write | obsolete |
| alaDaUNPVxlanFarEndIPListTable OBJECT-TYPE Table shows all the Far-End-IP-Lists configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50 | not-accessible | current | |
| alaDaUNPVxlanFarEndIPListEntry OBJECT-TYPE Far-end IP List entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1 | not-accessible | current | |
| alaDaUNPVxlanFarEndIPListName OBJECT-TYPE Name of the Far-End-IP list configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPVxlanFarEndIPListIPAddressCount OBJECT-TYPE The count of the IP Addresses configured for the corresponding Far-End-IP-List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1.2 | Unsigned32 | read-only | current |
| alaDaUNPVxlanFarEndIPListRemove OBJECT-TYPE This object is used to remove a Far-End-IP-List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1.3 | INTEGER {no(1), yes(2)} | read-write | current |
| alaDaUNPVxlanFarEndIPAddressListTable OBJECT-TYPE Table to configure the Far-End-List and the IP Addresses for that list. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51 | not-accessible | current | |
| alaDaUNPVxlanFarEndIPAddressListEntry OBJECT-TYPE Far-end IP Address List entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1 | not-accessible | current | |
| alaDaUNPVxlanFarEndIPAddressListIPType OBJECT-TYPE The IP address type of the IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1.1 | InetAddressType {ipv4(1), ipv6(2)} | not-accessible | current |
| alaDaUNPVxlanFarEndIPAddressListIP OBJECT-TYPE The Far-End IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1.2 | InetAddress (SIZE(4 | 16)) | not-accessible | current |
| alaDaUNPVxlanFarEndIPAddressListRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1.3 | RowStatus | read-create | current |
| alaDaUNPSpbFlushTable OBJECT-TYPE Table to flush the VXLAN access users based on some criteria such as MAC Address, Authentication Type, SAP, Service and/or Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52 | not-accessible | obsolete | |
| alaDaUNPSpbFlushEntry OBJECT-TYPE One entry to flush SPB access users on the basis of user criteria. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1 | not-accessible | obsolete | |
| alaDaUNPSpbFlushIndex OBJECT-TYPE Flush index. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.1 | Integer32 (1) | not-accessible | obsolete |
| alaDaUNPSpbFlushComplete OBJECT-TYPE Flush all users learnt on all SPB-access type ports. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.2 | INTEGER {none(1), all(2)} | read-write | obsolete |
| alaDaUNPSpbFlushAuthType OBJECT-TYPE Flush based on the authentication type of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.3 | INTEGER {noAuth(1), onex(2), mac(3)} | read-write | obsolete |
| alaDaUNPSpbFlushMacAddress OBJECT-TYPE Flush based on a single mac-address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.4 | MacAddress (SIZE(6)) | read-write | obsolete |
| alaDaUNPSpbFlushSapIDIfIndex OBJECT-TYPE Flush the users learnt on the given SAP-ID Interface Index. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.5 | InterfaceIndex | read-write | obsolete |
| alaDaUNPSpbFlushSapIDEncapVal OBJECT-TYPE Flush the users learnt on the given SAP-ID Encapsulation. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.6 | TmnxEncapVal | read-write | obsolete |
| alaDaUNPSpbFlushServiceID OBJECT-TYPE Flush the users learnt of the given VXLAN service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.7 | Unsigned32 | read-write | obsolete |
| alaDaUNPSpbFlushSpbProfile OBJECT-TYPE Flush the users learnt on the given SPB Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.8 | SnmpAdminString (SIZE(0..32)) | read-write | obsolete |
| alaDaKerberosMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53 | |||
| alaDaKerberosGlobalConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1 | |||
| alaDaKerberosGlobalMacMoveStatus OBJECT-TYPE Defines the global mac move status for Kerberos. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaKerberosGlobalInactivityTimer OBJECT-TYPE Inactivity Timer value for the Kerberos users in minutes. It will be configured globally. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.2 | Integer32 (10..600) | read-write | current |
| alaDaKerberosGlobalPolicy OBJECT-TYPE The name of the QoS Policy List name that will be used for a kerberos user if per domain QOS Policy List is not configured by object alaDaKerberosPolicyName. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.3 | SnmpAdminString (SIZE(0..31)) | read-write | current |
| alaDaKerberosGlobalPolicyStatus OBJECT-TYPE The status of global policy list. This can be Active or Inactive if alaDaKerberosGlobalPolicy is configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.4 | INTEGER {active(1), inactive(2)} | read-only | current |
| alaDaKerberosClientPktHwDiscardStats OBJECT-TYPE The total number of packets dropped due to hardware rate limiter, destined to Kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.5 | Counter32 | read-only | deprecated |
| alaDaKerberosServerPktHwDiscardStats OBJECT-TYPE The total number of packets from kerberos server, dropped due to hardware rate limiter. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.6 | Counter32 | read-only | deprecated |
| alaDaKerberosTotalClientPktRxStats OBJECT-TYPE The total number of packets received by software, destined to the kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.7 | Counter32 | read-only | current |
| alaDaKerberosTotalServerPktRxStats OBJECT-TYPE The total number of packets received by software from kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.8 | Counter32 | read-only | current |
| alaDaKerberosClientPktSwDiscardStats OBJECT-TYPE Total number of packtes discarded by software, destined to kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.9 | Counter32 | read-only | deprecated |
| alaDaKerberosServerPktSwDiscardStats OBJECT-TYPE Total number of packets discarded by software, received from kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.10 | Counter32 | read-only | deprecated |
| alaDaKerberosTotalASREQRxStats OBJECT-TYPE Total number of AS-REQ packet received by Kerberos application. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.11 | Counter32 | read-only | current |
| alaDaKerberosTotalASREPRxStats OBJECT-TYPE Total number of AS-REP packet received by Kerberos application. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.12 | Counter32 | read-only | current |
| alaDaKerberosTotalTGSREQRxStats OBJECT-TYPE Total number of TGS-REQ packet received by Kerberos application. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.13 | Counter32 | read-only | current |
| alaDaKerberosTotalTGSREPRxStats OBJECT-TYPE Total number of TGS-REP packet received by Kerberos application. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.14 | Counter32 | read-only | current |
| alaDaKerberosTotalErrorRxStats OBJECT-TYPE Total number of KRB-ERROR packet received by Kerberos application. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.15 | Counter32 | read-only | current |
| alaDaKerberosGlobalClearStats OBJECT-TYPE Defines the global clear statistics control for Kerberos Snooping The value reset (1) indicates that clear all global statistic counters. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.16 | INTEGER {default(1), reset(2)} | read-write | current |
| alaDaKerberosGlobalClearPortStats OBJECT-TYPE Defines the global clear statistics control for Kerberos Snooping The value reset (1) indicates that clear all per port statistic counters. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.17 | INTEGER {default(1), reset(2)} | read-write | current |
| alaDaKerberosGlobalServerTimeoutTimer OBJECT-TYPE Defines the global reply timeout value for Kerberos Server in seconds. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.1.18 | Integer32 (1..30) | read-write | current |
| alaDaKerberosPolicyConfigTable OBJECT-TYPE Provide the list of user policies configured per user domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2 | not-accessible | current | |
| alaDaKerberosPolicyConfigEntry OBJECT-TYPE Policy config table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1 | not-accessible | current | |
| alaDaKerberosPolicyDomainName OBJECT-TYPE The name of the kerberos user domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaKerberosPolicyName OBJECT-TYPE The name of the QoS Policy List name that will be used for a kerberos user in the domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.2 | SnmpAdminString (SIZE(1..31)) | read-create | current |
| alaDaKerberosPolicyStatus OBJECT-TYPE The status of domain level policy list. This can be Active or Inactive. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.3 | INTEGER {active(1), inactive(2)} | read-only | current |
| alaDaKerberosPolicyRowStatus OBJECT-TYPE This object allows entries to be created and deleted in the table | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.4 | RowStatus | read-create | current |
| alaDaKerberosUserTable OBJECT-TYPE Provide the list of Kerberos users. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3 | not-accessible | current | |
| alaDaKerberosUserEntry OBJECT-TYPE Kerberos user Table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1 | not-accessible | current | |
| alaDaKerberosUserMac OBJECT-TYPE Mac address of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.1 | MacAddress | accessible-for-notify | current |
| alaDaKerberosUserPort OBJECT-TYPE Port number on which user is learned. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.2 | InterfaceIndex | read-only | current |
| alaDaKerberosUserName OBJECT-TYPE Name of the user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.3 | SnmpAdminString (SIZE(1..32)) | read-only | current |
| alaDaKerberosUserDomain OBJECT-TYPE Domain of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.4 | SnmpAdminString (SIZE(1..32)) | read-only | current |
| alaDaKerberosUserAuthState OBJECT-TYPE Current state of the Kerberos User authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.5 | INTEGER {asAuthenticating(1), asAuthenticated(2), asFailed(3), asTimeout(4), tgsAuthenticating(5), tgsAuthenticated(6), tgsFailed(7), tgsTimeout(8)} | read-only | current |
| alaDaKerberosUserPolicy OBJECT-TYPE Classification Policy applied for the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.6 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| alaDaKerberosUserLeftTime OBJECT-TYPE Inactivity Timer left value for the Kerberos users in seconds. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.7 | Integer32 | read-only | current |
| alaDaKerberosUserState OBJECT-TYPE Current state of the Kerberos User. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.8 | INTEGER {idle(1), active(2)} | read-only | current |
| alaDaKerberosPortStatsTable OBJECT-TYPE This table contains the statistics for kerberos on per port basis. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4 | not-accessible | deprecated | |
| alaDaKerberosPortStatsEntry OBJECT-TYPE Kerberos statistics table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1 | not-accessible | deprecated | |
| alaDaKerberosStatsIfIndex OBJECT-TYPE The ifindex of the port on which Kerberos Snooping is running. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.1 | InterfaceIndex | not-accessible | deprecated |
| alaDaKerberosPortClearStats OBJECT-TYPE When this object is set to reset(1), all statistics parameters corresponding to this port gets cleared (reset). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.2 | INTEGER {default(1), reset(2)} | read-write | deprecated |
| alaDaKerberosPortClientPktRxStats OBJECT-TYPE Number of packets received by software on a port, destined to the kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.3 | Counter32 | read-only | deprecated |
| alaDaKerberosPortServerPktRxStats OBJECT-TYPE Number of packets from kerberos server received by software on a port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.4 | Counter32 | read-only | deprecated |
| alaDaKerberosPortClientPktSwDiscardStats OBJECT-TYPE Number of packets discarded by software on a port, destined to the kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.5 | Counter32 | read-only | deprecated |
| alaDaKerberosPortServerPktSwDiscardStats OBJECT-TYPE Number of packets from kerberos server discarded by software on a port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.6 | Counter32 | read-only | deprecated |
| alaDaKerberosPortASREQRxStats OBJECT-TYPE Number of AS-REQ packets received on a port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.7 | Counter32 | read-only | deprecated |
| alaDaKerberosPortASREPRxStats OBJECT-TYPE Number of AS-REP packets received on a port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.8 | Counter32 | read-only | deprecated |
| alaDaKerberosPortTGSREQRxStats OBJECT-TYPE Number of TGS-REQ packets received on a port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.9 | Counter32 | read-only | deprecated |
| alaDaKerberosPortTGSREPRxStats OBJECT-TYPE Number of TGS-REP packets received on a port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.10 | Counter32 | read-only | deprecated |
| alaDaKerberosPortErrorRxStats OBJECT-TYPE Number of KRB-ERROR packet received on a port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.11 | Counter32 | read-only | deprecated |
| alaDaKerberosServerTable OBJECT-TYPE This table configures the kerberos server ip address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5 | not-accessible | current | |
| alaDaKerberosServerEntry OBJECT-TYPE Kerberos server table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1 | not-accessible | current | |
| alaDaKerberosIpAddressType OBJECT-TYPE The ip-address type of the Kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.1 | InetAddressType | accessible-for-notify | current |
| alaDaKerberosIpAddress OBJECT-TYPE The ip-address of the Kerberos server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.2 | InetAddress | accessible-for-notify | current |
| alaDaKerberosUdpPort OBJECT-TYPE The UDP port number for Kerberos server host. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.3 | INTEGER (1..65535) | read-create | current |
| alaDaKerberosRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.4 | RowStatus | read-create | current |
| alaDaUNPPortVlanTable OBJECT-TYPE This table contains a list of untagged VLANs configured for an UNP Port/Linkagg | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54 | not-accessible | current | |
| alaDaUNPPortVlanEntry OBJECT-TYPE Each of these entries represents an untagged Vlan Port association | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1 | not-accessible | current | |
| alaDaUNPPortVlanVID OBJECT-TYPE Untagged VLAN for an UNP Port/Linkagg. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1.1 | Unsigned32 (1..4094) | not-accessible | current |
| alaDaUNPPortVlanRowStatus OBJECT-TYPE On create, the specified UNP Port/Linkagg must exist in alaDaUNPPortTable, otherwise an entry creation in this table would not be allowed. Deletion of an UNP Port/Linkagg entry in alaDaUNPPortTable would result in deletion of all entries for that Port/Linkagg in the alaDaUNPPortVlanEntry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1.2 | RowStatus | read-create | current |
| alaDaUNPPortVlanType OBJECT-TYPE The type of the vpa - unpUntag or unpQtag | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1.3 | INTEGER {unpQtag(1), unpUntag(2)} | read-create | current |
| alaDaUNPVlanRuleTable OBJECT-TYPE Vlan Tag classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55 | not-accessible | current | |
| alaDaUNPVlanRuleEntry OBJECT-TYPE VlanTag based classification rule . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1 | not-accessible | current | |
| alaDaUNPVlanRuleVlanTag OBJECT-TYPE The vlan tag to be used for classification of tagged pkts. The range states the valid Vlan range in the system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.1 | Integer32 (1..4094) | not-accessible | current |
| alaDaUNPVlanRuleVlanTagPosition OBJECT-TYPE This object specifies the tag position to which this Vlan Tag rule should be applied in the case of double tagged frames. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.2 | INTEGER {outerTag(1), innerTag(2)} | read-create | current |
| alaDaUNPVlanRuleEdgeProf OBJECT-TYPE The edge profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.3 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPVlanRuleRowStatus OBJECT-TYPE The Row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.4 | RowStatus | read-create | current |
| alaDaUNPETmplVlanTable OBJECT-TYPE This table contains a list of untagged VLANs configured for an UNP Edge Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56 | not-accessible | current | |
| alaDaUNPETmplVlanEntry OBJECT-TYPE Each of these entries represents an untagged Vlan Edge Template association. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56.1 | not-accessible | current | |
| alaDaUNPETmplVlanVID OBJECT-TYPE Untagged VLAN for an UNP Edge Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56.1.1 | Unsigned32 (1..4094) | not-accessible | current |
| alaDaUNPETmplVlanRowStatus OBJECT-TYPE On create, the specified UNP Edge Template must exist in alaDaUNPETmplTable, otherwise an entry creation in this table would not be allowed. Deletion of an Edge Template entry in alaDaUNPETmplTable would result in deletion of all entries for that Edge Template in the alaDaUNPETmplVlanTable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56.1.2 | RowStatus | read-create | current |
| alaDaUNPUserFlushTable OBJECT-TYPE Table to flush the UNP users based on some criteria such as MAC Address, Authentication Type and Port or SAP/Service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57 | not-accessible | current | |
| alaDaUNPUserFlushEntry OBJECT-TYPE One entry to flush users on the basis of user criteria. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1 | not-accessible | current | |
| alaDaUNPUserFlushIndex OBJECT-TYPE Flush index. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.1 | Integer32 (1) | not-accessible | current |
| alaDaUNPUserFlushComplete OBJECT-TYPE Flush all users learnt on all access type ports. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.2 | INTEGER {none(1), all(2)} | read-write | current |
| alaDaUNPUserFlushAuthType OBJECT-TYPE Flush based on the authentication type of the user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.3 | INTEGER {noAuth(1), onex(2), mac(3)} | read-write | current |
| alaDaUNPUserFlushMacAddress OBJECT-TYPE Flush based on a single MAC address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.4 | MacAddress (SIZE(6)) | read-write | current |
| alaDaUNPUserFlushProfile OBJECT-TYPE Flush the users learnt on the given Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.5 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| alaDaUNPUserFlushPortStart OBJECT-TYPE Start of the Port-Range on which the users learnt need to be flushed. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.6 | InterfaceIndex | read-write | current |
| alaDaUNPUserFlushPortEnd OBJECT-TYPE End of the Port-Range on which the users learnt need to be flushed. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.7 | InterfaceIndex | read-write | current |
| alaDaUNPUserFlushSapIDIfIndex OBJECT-TYPE Flush the users learnt on the given SAP-ID Interface Index. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.8 | InterfaceIndex | read-write | current |
| alaDaUNPUserFlushSapIDEncapVal OBJECT-TYPE Flush the users learnt on the given SAP-ID Encapsulation. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.9 | TmnxEncapVal | read-write | current |
| alaDaUNPUserFlushServiceID OBJECT-TYPE Flush the users learnt of the given service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.10 | Unsigned32 | read-write | current |
| alaDaUNPCustDomainRuleTable OBJECT-TYPE Based on customer domain id , Profile Classification table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58 | not-accessible | current | |
| alaDaUNPCustDomainRuleEntry OBJECT-TYPE Customer Domain Rule Table Entries . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1 | not-accessible | current | |
| alaDaUNPCustDomainRuleId OBJECT-TYPE CustDomain Id . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.1 | Integer32 (1..255) | not-accessible | current |
| alaDaUNPCustDomainRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.2 | Integer32 (0..4094) | read-create | current |
| alaDaUNPCustDomainRuleProfile1 OBJECT-TYPE Associated Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainRuleProfile2 OBJECT-TYPE Associated Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.4 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainRuleProfile3 OBJECT-TYPE Associated Profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPCustDomainRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.6 | RowStatus | read-create | current |
| alaDaUNPPortTemplateTable OBJECT-TYPE Unp Port Template Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59 | not-accessible | current | |
| alaDaUNPPortTemplateEntry OBJECT-TYPE EdgeTemplate Entries. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1 | not-accessible | current | |
| alaDaUNPPortTemplateName OBJECT-TYPE The name of the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPPortTemplateAdminState OBJECT-TYPE To enable/disable the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.2 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateDirection OBJECT-TYPE The current value of the administrative controlled directions parameter for the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.3 | INTEGER {both(1), in(2), noVal(3)} | read-create | current |
| alaDaUNPPortTemplateDomainID OBJECT-TYPE The Domain that this port belongs to. Default is on domain 0. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.4 | Unsigned32 (0..4294967295) | read-create | current |
| alaDaUNPPortTemplateClassification OBJECT-TYPE To enable/disable Classification on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.5 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateTrustTag OBJECT-TYPE To enable/disable Truth Tag on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.6 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateDynamicService OBJECT-TYPE Indicates the type of dynamic service for the port-template. Dynamic Service type SPB/VXLAN are applicable for Access type UNP port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.7 | INTEGER {none(1), spb(2), vxlan(3)} | read-create | current |
| alaDaUNPPortTemplateDefaultProfile OBJECT-TYPE The default profile for the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortTemplateAAAProfile OBJECT-TYPE The AAA profile for the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortTemplateRedirectPortBounce OBJECT-TYPE To enable/disable Redirect Port bounce on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.10 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplate8021XAuth OBJECT-TYPE To enable/disable 802.1x authentication on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.11 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplate8021XAuthPassAlternate OBJECT-TYPE The Pass-Alternate profile for 802.1X authentication on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.12 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortTemplate8021XAuthBypass OBJECT-TYPE To enable/disable 802.1x authentication bypass on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.13 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplate8021XAuthFailPolicy OBJECT-TYPE 802.1x authentication failure policy for the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.14 | INTEGER {default(1), mac(2)} | read-create | current |
| alaDaUNPPortTemplate8021XAuthTxPeriod OBJECT-TYPE 802.1x authentication Tx period. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.15 | Unsigned32 (1..60) | read-create | current |
| alaDaUNPPortTemplate8021XAuthSuppTimeout OBJECT-TYPE 802.1x authentication supplicant Timeout period. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.16 | Unsigned32 (1..120) | read-create | current |
| alaDaUNPPortTemplate8021XAuthMaxReq OBJECT-TYPE 802.1x authentication Max requests. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.17 | Unsigned32 (1..3) | read-create | current |
| alaDaUNPPortTemplateMACAuth OBJECT-TYPE To enable/disable MAC authentication on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.18 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateMACAuthPassAlternate OBJECT-TYPE The Pass-Alternate profile for MAC authentication on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.19 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortTemplateMACAuthAllowEAP OBJECT-TYPE To enable/disable MAC authentication on the Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.20 | INTEGER {pass(1), fail(2), noAuth(3), none(4)} | read-create | current |
| alaDaUNPPortTemplateForceL3Learning OBJECT-TYPE UNP force L3 learning status on the UNP Port-Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.21 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateForceL3LearningPortBounce OBJECT-TYPE Port-Bounce associated with UNP force L3 learning status on the UNP Port-Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.22 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateRowStatus OBJECT-TYPE Row Status for this table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.23 | RowStatus | read-create | current |
| alaDaUNPPortTemplateL2Profile OBJECT-TYPE Service L2-Profile to be bound to UNP Dynamic Access Ports for controlling L2-Traffic passing through that port. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.24 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPPortTemplateApMode OBJECT-TYPE To enable/disable AP-mode on the port template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.25 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateApModeSecurity OBJECT-TYPE To enable/disable AP-mode security on the port template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.26 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateSwSuppSecureMode OBJECT-TYPE To enable/disable switch supplicant secure mode on the port template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.27 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPPortTemplateBpduLldpLearn OBJECT-TYPE To enable/disable BPDU LLDP learn on the port template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.28 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileTable OBJECT-TYPE This table stores the profiles created in the system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60 | not-accessible | current | |
| alaDaUNPProfileEntry OBJECT-TYPE Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1 | not-accessible | current | |
| alaDaUNPProfileName OBJECT-TYPE The name of the UNP profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPProfileAuthenticationFlag OBJECT-TYPE UNP profile authentication flag. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.2 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMobileTag OBJECT-TYPE UNP profile Mobile Tag flag. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.3 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileCPortalAuthentication OBJECT-TYPE UNP profile Captive Profile Authentication flag. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.4 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileRedirect OBJECT-TYPE UNP profile redirect flag. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.5 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileQoSPolicy OBJECT-TYPE The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.6 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfilePeriodPolicy OBJECT-TYPE The name of the Period Policy List name that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.7 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileCPortalProfile OBJECT-TYPE The name of the Captive Portal Profile Policy List name that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileLocationPolicy OBJECT-TYPE The name of the Location Policy name that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.9 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileSaaProfile OBJECT-TYPE The name of the SAA profile name that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileInactivityInterval OBJECT-TYPE Inactivity Timer value for the UNP profile users in minutes. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.11 | Integer32 (10..600) | read-create | current |
| alaDaUNPProfileKerberosAuthentication OBJECT-TYPE UNP profile Kerberos Authentication flag. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.12 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMaxIngressBandwidth OBJECT-TYPE Maximum Ingress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile. If value is set to -1, then the Ingress Bandwidth specified for the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.13 | Integer32 (-1 | 0..2147483647) | read-create | current |
| alaDaUNPProfileMaxEgressBandwidth OBJECT-TYPE Maximum Egress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile. If value is set to -1, then the Egress Bandwidth specified for the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.14 | Integer32 (-1 | 0..2147483647) | read-create | current |
| alaDaUNPProfileMaxIngressDepth OBJECT-TYPE Maximum Ingress Depth associated to Bandwidth. If set to -1, then the Depth associated with the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.15 | Integer32 (-1 | 0..16384) | read-create | current |
| alaDaUNPProfileMaxEgressDepth OBJECT-TYPE Maximum Egress Depth associated to Bandwidth. If set to -1, then the Depth associated with the profile is unconfigured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.16 | Integer32 (-1 | 0..16384) | read-create | current |
| alaDaUNPProfileRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.17 | RowStatus | read-create | current |
| alaDaUNPProfileAFDConfig OBJECT-TYPE Configuration is made by admin or auto-fabric on this profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.18 | INTEGER {admin(1), autoFabric(2)} | read-only | current |
| alaDaUNPProfileMacMobility OBJECT-TYPE Profile configuration for allowing mac-mobility. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.19 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapVlanTable OBJECT-TYPE This table stores the VLAN profiles created in the system. The entries would be mapped to vlan ID which would be used by device authentication for classifying users. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61 | not-accessible | current | |
| alaDaUNPProfileMapVlanEntry OBJECT-TYPE VLAN Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61.1 | not-accessible | current | |
| alaDaUNPProfileMapVlanVlanID OBJECT-TYPE The VLAN ID for this profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61.1.1 | Unsigned32 (1..4094) | read-create | current |
| alaDaUNPProfileMapVlanRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61.1.2 | RowStatus | read-create | current |
| alaDaUNPProfileMapSpbTable OBJECT-TYPE This table stores the Service Classification profiles created in the system. The entries provides information to classify device in the Service domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62 | not-accessible | current | |
| alaDaUNPProfileMapSpbEntry OBJECT-TYPE Service Classification Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1 | not-accessible | current | |
| alaDaUNPProfileMapSpbEncapVal OBJECT-TYPE The encapsulation to be used for the SAP connecting to the service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.1 | TmnxEncapVal | read-create | current |
| alaDaUNPProfileMapSpbIsid OBJECT-TYPE The object represent the I-SID that is to be dynamically created when SPB Service ID does not exist in the system and must be used along with B-VLAN. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.2 | Unsigned32 (256..16777214) | read-create | current |
| alaDaUNPProfileMapSpbBVlan OBJECT-TYPE The Backbone VLAN ID (BVLAN) used for the I-SID specified in alaUNPProfileMapSpbIsid. This object must be specified along with alaUNPProfileMapSpbIsid. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.3 | Unsigned32 (1..4094) | read-create | current |
| alaDaUNPProfileMapSpbMulticastMode OBJECT-TYPE To configure the multicast replication mode for each service: Head-end(1) where a non-unicast packet entering the SAP port is replicated once for each receiver in the b-domain using its unicast BMAC. Tandem(2) where a non-unicast packet entering the SAP port is replicated once at each node using the multicast group address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.4 | INTEGER {headend(1), tandem(2)} | read-create | current |
| alaDaUNPProfileMapSpbVlanXlation OBJECT-TYPE To enable/disable the vlan translation for all the SAPs configured in this service if the corresponding access ports for the SAPs also has the VLAN translation enabled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.5 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapSpbRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.6 | RowStatus | read-create | current |
| alaDaUNPProfileMapSpbIgmpSnooping OBJECT-TYPE To enable/disable the IGMP-snooping. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.7 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapSpbIgmpProfile OBJECT-TYPE The name of the IGMP-snooping IPMS profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.8 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileMapSpbMldSnooping OBJECT-TYPE To enable/disable the MLD-snooping. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.9 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapSpbMldProfile OBJECT-TYPE The name of the MLD-snooping IPMS profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.10 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileMapSpbRemoveIngressTag OBJECT-TYPE To enable/disable the remove ingress tag option for the dynamic service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.11 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapSpbETree OBJECT-TYPE To enable/disable the e-tree option for the dynamic service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.12 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapVxlanTable OBJECT-TYPE This table stores the Service Classification profiles created in the system. The entries provides information to classify device in the VXLAN Service domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63 | not-accessible | current | |
| alaDaUNPProfileMapVxlanEntry OBJECT-TYPE VXLAN Service Classification Profile entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1 | not-accessible | current | |
| alaDaUNPProfileMapVxlanEncapVal OBJECT-TYPE The encapsulation to be used for the SAP connecting to the service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.1 | TmnxEncapVal | read-create | current |
| alaDaUNPProfileMapVxlanVnid OBJECT-TYPE The object represnet the VNID that is to be used to dynamically create a VXLAN service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.2 | Unsigned32 (1..16777215) | read-create | current |
| alaDaUNPProfileMapVxlanFarEndIPList OBJECT-TYPE The name of the Far End IP List that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileMapVxlanMulticastIPAddressType OBJECT-TYPE The IP address type of the multicast group IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.4 | InetAddressType | read-create | current |
| alaDaUNPProfileMapVxlanMulticastIPAddress OBJECT-TYPE The multicast group IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.5 | InetAddress | read-create | current |
| alaDaUNPProfileMapVxlanVlanXlation OBJECT-TYPE To enable/disable the vlan translation for all the SAPs configured in this service if the corresponding access ports for the SAPs also has the vlan translation enabled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.6 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapVxlanMulticastMode OBJECT-TYPE To configure the multicast replication mode for each service: Head-end(1) where a non-unicast packet entering the SAP port is replicated once for each receiver in the b-domain using its unicast BMAC. Tandem(2) where a non-unicast packet entering the SAP port is replicated once at each node using the multicast group address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.7 | INTEGER {headend(1), tandem(2), hybrid(3)} | read-create | current |
| alaDaUNPProfileMapVxlanRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.8 | RowStatus | read-create | current |
| alaDaUNPProfileMapVxlanMacOrchestration OBJECT-TYPE To enable/disable the MAC orchestration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.9 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapVxlanRemoveIngressTag OBJECT-TYPE To enable/disable the remove ingress tag option for the dynamic service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.10 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapVxlanTcpMss OBJECT-TYPE TCP MSS config value | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.11 | Integer32 (500..1410) | read-create | current |
| alaDaUNPProfileMapVxlanTcpMssOverlayProfile OBJECT-TYPE TCP MSS overlay profile | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.12 | SnmpAdminString | read-create | current |
| alaDaUNPProfileMapStaticTable OBJECT-TYPE This table stores the Static profiles created in the system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64 | not-accessible | current | |
| alaDaUNPProfileMapStaticEntry OBJECT-TYPE Static Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1 | not-accessible | current | |
| alaDaUNPProfileMapStaticEncapVal OBJECT-TYPE The encapsulation to be used for the SAP connecting to the service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1.1 | TmnxEncapVal | read-create | current |
| alaDaUNPProfileMapStaticServiceID OBJECT-TYPE The Service ID for this profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1.2 | Unsigned32 | read-create | current |
| alaDaUNPProfileMapStaticRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1.3 | RowStatus | read-create | current |
| alaDaUNPCustDomainMacIpRuleTable OBJECT-TYPE Mac Address,IP & customer domain classification table . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65 | not-accessible | current | |
| alaDaUNPCustDomainMacIpRuleEntry OBJECT-TYPE Mac Ip & customer domain based classification rule entries . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1 | not-accessible | current | |
| alaDaUNPCustDomainMacIpRuleMacAddr OBJECT-TYPE Classification Rule mac Address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.1 | MacAddress (SIZE(6)) | not-accessible | current |
| alaDaUNPCustDomainMacIpRuleIpAddrType OBJECT-TYPE The IP address type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.2 | InetAddressType | not-accessible | current |
| alaDaUNPCustDomainMacIpRuleIpAddr OBJECT-TYPE The IP network address . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.3 | InetAddress | not-accessible | current |
| alaDaUNPCustDomainMacIpRuleDomainId OBJECT-TYPE Classification Rule Group Id. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.4 | Integer32 (0..255) | not-accessible | current |
| alaDaUNPCustDomainMacIpRuleVlanTag OBJECT-TYPE The VLAN Tag to be used for classification of tagged pkts. VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is encoded in the least significant 16 bits, and the value of the inner VLAN ID is encoded in the most significant 16 bits. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.5 | Integer32 (0..4094) | read-create | current |
| alaDaUNPCustDomainMacIpRuleProfile1 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.6 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPCustDomainMacIpRuleProfile2 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.7 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPCustDomainMacIpRuleProfile3 OBJECT-TYPE The profile name in the User Network Profile Table to be applied. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.8 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPCustDomainMacIpRuleRowStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.9 | RowStatus | read-create | current |
| alaDaUNPCustDomainMacIpRuleIpMaskType OBJECT-TYPE The IP mask type. This object is mandatory. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.10 | InetAddressType {ipv4(1), ipv6(2)} | read-create | current |
| alaDaUNPCustDomainMacIpRuleIpMask OBJECT-TYPE The IP network mask applying to the IP network address. This object is mandatory. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.11 | InetAddress (SIZE(4 | 16)) | read-create | current |
| alaDaUNPPortTemplateVlanTable OBJECT-TYPE This table contains a list of untagged VLANs configured for an UNP Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66 | not-accessible | current | |
| alaDaUNPPortTemplateVlanEntry OBJECT-TYPE Each of these entries represents an untagged Vlan Port Template association. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1 | not-accessible | current | |
| alaDaUNPPortTemplateVlanVID OBJECT-TYPE Untagged VLAN for an UNP Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1.1 | Unsigned32 (1..4094) | not-accessible | current |
| alaDaUNPPortTemplateVlanRowStatus OBJECT-TYPE On create, the specified UNP Port Template must exist in alaDaUNPPortTemplateTable, otherwise an entry creation in this table would not be allowed. Deletion of an Port Template entry in alaDaUNPPortTemplateTable would result in deletion of all entries for that Port Template in the alaDaUNPPortTmplVlanTable. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1.2 | RowStatus | read-create | current |
| alaDaUNPPortTemplateVlanType OBJECT-TYPE The type of the vpa - unpUntag or unpQtag | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1.3 | INTEGER {unpQtag(1), unpUntag(2)} | read-create | current |
| alaDaUNPWlanConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.67 | |||
| alaDaUNPWlanMode OBJECT-TYPE Indicated whether WLAN configuration is enabled or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.67.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPWlanManagementVlan OBJECT-TYPE The VLAN to be used for WLAN. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.67.2 | Unsigned32 (1..4094) | read-write | current |
| alaDaUNPWlanAuthenticationFlag OBJECT-TYPE Indicated whether the authentication flag on the DefaultWLANProfile profile is enabled or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.67.3 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPWlanForceDefWlanProfile OBJECT-TYPE Indicated whether classification engine is force to run or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.67.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPWlanAuthServerDownFallback OBJECT-TYPE Indicated whether the auth-server-down profile is implicitly map to DefaultWLANProfile or not. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.67.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaDaUNPWlanSecurityLevel OBJECT-TYPE The object defines the configured authentications to be associated with DefaultWLANProfile profile none(1), lldp(2), mac-auth(3), mac-auth+lldp(4) and 802.1x(5). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.67.6 | INTEGER {none(1), macAuth(2), dot1X(3)} | read-write | current |
| alaDaUNPProfileMapL2GreTable OBJECT-TYPE This table stores the Service Classification profiles created in the system. The entries provides information to classify device in the L2Gre Service domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68 | not-accessible | current | |
| alaDaUNPProfileL2GreEntry OBJECT-TYPE L2Gre Service Classification Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1 | not-accessible | current | |
| alaDaUNPProfileMapL2GreEncapVal OBJECT-TYPE The encapsulation to be used for the SAP connecting to the service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.1 | TmnxEncapVal | read-create | current |
| alaDaUNPProfileMapL2GreVpnid OBJECT-TYPE The object represent the VPNID that is to be used to dynamically create a L2GRE service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.2 | Unsigned32 (1..16777215) | read-create | current |
| alaDaUNPProfileMapL2GreFarEndIPAddressType OBJECT-TYPE The IP address type. This feature only supports IPv4. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.3 | InetAddressType {ipv4(1)} | read-create | current |
| alaDaUNPProfileMapL2GreFarEndIPAddress OBJECT-TYPE The IP address. This feature only supports IPv4. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.4 | InetAddress (SIZE(0 | 4)) | read-create | current |
| alaDaUNPProfileMapL2GreFarEndIPList OBJECT-TYPE The name of the Far End IP List that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.5 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileMapL2GreRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.6 | RowStatus | read-create | current |
| alaDaUNPProfileMapL2GreVlanXlation OBJECT-TYPE To enable/disable the vlan translation for L2GRE . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.7 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapL2GreRemoveIngressTag OBJECT-TYPE To enable/disable the remove ingress tag option for the dynamic service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.8 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPL2GreFarEndIPListTable OBJECT-TYPE Table shows all the Far-End-IP-Lists configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69 | not-accessible | current | |
| alaDaUNPL2GreFarEndIPListEntry OBJECT-TYPE Far-end IP List entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1 | not-accessible | current | |
| alaDaUNPL2GreFarEndIPListName OBJECT-TYPE Name of the Far-End-IP list configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPL2GreFarEndIPListIPAddressCount OBJECT-TYPE The count of the IP Addresses configured for the corresponding Far-End-IP-List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1.2 | Unsigned32 | read-only | current |
| alaDaUNPL2GreFarEndIPListRemove OBJECT-TYPE This object is used to remove a Far-End-IP-List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1.3 | INTEGER {no(1), yes(2)} | read-write | current |
| alaDaUNPL2GreFarEndIPAddressListTable OBJECT-TYPE Table to configure the Far-End-List and the IP Addresses for that list. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70 | not-accessible | current | |
| alaDaUNPL2GreFarEndIPAddressListEntry OBJECT-TYPE Far-end IP Address List entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1 | not-accessible | current | |
| alaDaUNPL2GreFarEndIPAddressListIPType OBJECT-TYPE The IP address type of the IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1.1 | InetAddressType {ipv4(1)} | not-accessible | current |
| alaDaUNPL2GreFarEndIPAddressListIP OBJECT-TYPE The Far-End IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1.2 | InetAddress (SIZE(4)) | not-accessible | current |
| alaDaUNPL2GreFarEndIPAddressListRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1.3 | RowStatus | read-create | current |
| alaDaUNPNetworkGroupTable OBJECT-TYPE Network-group is basic building for defining any number of network groups | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71 | not-accessible | current | |
| alaDaUNPNetworkGroupEntry OBJECT-TYPE Entry of network groups | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1 | not-accessible | current | |
| alaDaUNPNetworkGroupName OBJECT-TYPE The name of the network group entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPNetworkGroupIpAddrType OBJECT-TYPE Address type of the network group entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.2 | InetAddressType {ipv4(1), ipv6(2)} | not-accessible | current |
| alaDaUNPNetworkGroupIpAddr OBJECT-TYPE IP address of network group | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.3 | InetAddress (SIZE(4 | 16)) | not-accessible | current |
| alaDaUNPNetworkGroupIpMask OBJECT-TYPE IP Mask of the network group entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.4 | InetAddress (SIZE(4 | 16)) | not-accessible | current |
| alaDaUNPNetworkGroupRowStatus OBJECT-TYPE Status of the network group entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.5 | RowStatus | read-create | current |
| alaDaUNPRouterAuthUserGroupTable OBJECT-TYPE Configures a condition for L3-Authentication using a condition as either source- network-group or destination- network-group or both | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72 | not-accessible | current | |
| alaDaUNPRouterAuthUserGroupEntry OBJECT-TYPE Router Authentication Entry | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1 | not-accessible | current | |
| alaDaUNPRouterAuthenticationName OBJECT-TYPE The name of the condition for router-authentication trigger | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPRouterAuthenticationSrcGroup OBJECT-TYPE The source-network-group configured group of IPv4 addresse(s) which needs to be used in defining source and/or dest-network-group condition for challenging authentication on traffic matching it | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.2 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPRouterAuthenticationDestGroup OBJECT-TYPE The destination-network-group configuredgroup of IPv4 addresse(s) which needs to be used in defining source and/or dest-network-group condition for challenging authentication on traffic matching it | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPRouterAuthenticationRowStatus OBJECT-TYPE Router Authentication Row Status | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.4 | RowStatus | read-create | current |
| alaDaUNPRouterAuthenticationConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.73 | |||
| alaDaUNPRouterAuthCpProfileName OBJECT-TYPE The name of captive-portal-profile . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.73.1 | SnmpAdminString (SIZE(0..255)) | read-write | current |
| alaDaUNPRouterAuthenticationFlushTable OBJECT-TYPE Table to flush the UNP router authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74 | not-accessible | current | |
| alaDaUNPRouterAuthenticationFlushEntry OBJECT-TYPE The entry of router authentication flush. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1 | not-accessible | current | |
| alaDaUNPRouterAuthenticationFlushIndex OBJECT-TYPE Flush index. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.1 | Integer32 (1) | not-accessible | current |
| alaDaUNPRouterAuthenticationFlushComplete OBJECT-TYPE Flush all users learnt on all access type ports. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.2 | INTEGER {none(1), all(2)} | read-create | current |
| alaDaUNPRouterAuthenticationFlushUserGroupName OBJECT-TYPE The router authentication flush group name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPRouterAuthenticationFlushType OBJECT-TYPE The router authentication flush type . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.4 | INTEGER {cp(1), ip(2)} | read-create | current |
| alaDaUNPRouterAuthenticationFlushUserName OBJECT-TYPE The username of router authentication flush. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.5 | SnmpAdminString (SIZE(1..32)) | read-create | current |
| alaDaUNPRouterAuthenticationFlushIpAddressType OBJECT-TYPE The IP address type of router authentication flush | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.6 | InetAddressType {ipv4(1), ipv6(2)} | read-create | current |
| alaDaUNPRouterAuthenticationFlushIpAddress OBJECT-TYPE The IP address of router authentication flush. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.7 | InetAddress | read-create | current |
| alaDaUNPPortProfileTable OBJECT-TYPE This table contains a list of persistent profile configured for an UNP Port/Linkagg. This is applicable only to UNP Port-Type Access. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75 | not-accessible | current | |
| alaDaUNPPortProfileEntry OBJECT-TYPE Each of these entries represents a persistent UNP-Profile associated with UNP Access Port/Linkagg. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75.1 | not-accessible | current | |
| alaDaUNPPortProfileName OBJECT-TYPE Persistent UNP-Profile Name assigned on UNP Access Port/Linkagg. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPPortProfileRowStatus OBJECT-TYPE On create, the specified UNP Port/Linkagg must exist in alaDaUNPPortTable, otherwise an entry creation in this table would not be allowed. Deletion of an UNP Port/Linkagg entry in alaDaUNPPortTable would result in deletion of all entries for that Port/Linkagg in the alaDaUNPPortProfileEntry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75.1.2 | RowStatus | read-create | current |
| alaDaUNPPortTemplateProfileTable OBJECT-TYPE This table contains a list of persistent profile configured for an UNP Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76 | not-accessible | current | |
| alaDaUNPPortTemplateProfileEntry OBJECT-TYPE Each of these entries represents a persistent UNP-Profile associated with an UNP Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76.1 | not-accessible | current | |
| alaDaUNPPortTemplateProfileName OBJECT-TYPE Persistent UNP-Profile Name assigned on UNP Port Template. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPPortTemplateProfileRowStatus OBJECT-TYPE On create, the specified UNP Port Template must exist in alaDaUNPPortTemplateTable, otherwise an entry creation in this table would not be allowed. Deletion of an UNP PortTemplate entry in alaDaUNPPortTemplateTable would result in deletion of all entries for that Port Template in the alaDaUNPPortTemplateProfileEntry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76.1.2 | RowStatus | read-create | current |
| alaDaUnpRouterAuthenticationUserTable OBJECT-TYPE A table of router authentication users. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77 | not-accessible | deprecated | |
| alaDaUnpRouterAuthenticationUserEntry OBJECT-TYPE The entry of router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1 | not-accessible | deprecated | |
| alaDaUNPRouterAuthenticationUserIpType OBJECT-TYPE The address type of the router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.1 | InetAddressType {ipv4(1), ipv6(2)} | not-accessible | deprecated |
| alaDaUNPRouterAuthenticationUserIpAddress OBJECT-TYPE The IP address of the router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.2 | InetAddress (SIZE(4 | 16)) | not-accessible | deprecated |
| alaDaUNPRouterAuthenticationUserName OBJECT-TYPE The name of the condition for router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.3 | SnmpAdminString (SIZE(0..32)) | read-only | deprecated |
| alaDaUNPRouterAuthenticationUserDestinationGroup OBJECT-TYPE The destination group configured group of IPv4 address(s). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.4 | SnmpAdminString (SIZE(0..32)) | read-only | deprecated |
| alaDaUNPRouterAuthenticationUserInterfaceName OBJECT-TYPE The name of the router authentication user interface. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.5 | SnmpAdminString (SIZE(0..32)) | read-only | deprecated |
| alaDaUNPRouterAuthenticationUserVlan OBJECT-TYPE The Vlan of the router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.6 | Unsigned32 | read-only | deprecated |
| alaDaUNPRouterAuthenticationUserAuthType OBJECT-TYPE The type of the router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.7 | INTEGER {ip(1), cp(2)} | read-only | deprecated |
| alaDaUNPRouterAuthenticationUserAuthStatus OBJECT-TYPE The status of the router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.8 | INTEGER {pass(1), fail(2)} | read-only | deprecated |
| alaDaUNPRouterAuthenticationUserLoginTime OBJECT-TYPE The login time stamp of the router authentication user. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.9 | DateAndTime | read-only | deprecated |
| alaDaUNPRouterAuthenticationUserSessionRemainingTime OBJECT-TYPE The number of seconds after which the session is disabled. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.10 | Unsigned32 | read-only | deprecated |
| alaDaUNPRedirectAllowedWebServerTable OBJECT-TYPE Table of UNP Redirect allowed web server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78 | not-accessible | current | |
| alaDaUNPRedirectAllowedWebServerEntry OBJECT-TYPE Definition of UNP Redirect allowed web server | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1 | not-accessible | current | |
| alaDaUNPRedirectAllowedWebServerName OBJECT-TYPE Name of Redirect allowed web server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1.1 | SnmpAdminString (SIZE(1..32)) | accessible-for-notify | current |
| alaDaUNPRedirectAllowedWebServerIpAddressType OBJECT-TYPE IP Address type of Redirect allowed web server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1.2 | InetAddressType {ipv4(1)} | read-create | current |
| alaDaUNPRedirectAllowedWebServerIpAddress OBJECT-TYPE IP Address of Redirect allowed web server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1.3 | InetAddress | read-create | current |
| alaDaUNPRedirectAllowedWebServerFQDN OBJECT-TYPE FQDN of Redirect allowed web server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1.4 | SnmpAdminString (SIZE(1..255)) | read-create | current |
| alaDaUNPRedirectAllowedWebServerFQDNResolvedTime OBJECT-TYPE FQDN resolved time of Redirect allowed web server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1.5 | SnmpAdminString (SIZE(0..255)) | read-only | current |
| alaDaUNPRedirectAllowedWebServerRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1.6 | RowStatus | read-create | current |
| alaDaUNPRedirectAllowedWebServerIpAddrStatus OBJECT-TYPE The allowed web server ipaadr status defines wheather the configured Ip is programmed in HW or not | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.78.1.7 | INTEGER {programmed(1), notProgrammed(2), notApplicable(3)} | read-only | current |
| alaDaUNPFQDNResolvedIPTable OBJECT-TYPE Table of UNP FQDN resolved ip addresses. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.79 | not-accessible | current | |
| alaDaUNPFQDNResolvedIPEntry OBJECT-TYPE Definition of UNP FQDN resolved ip addresses. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.79.1 | not-accessible | current | |
| alaDaUNPFQDNResolvedIPName OBJECT-TYPE Name of FQDN resolved ip addresses. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.79.1.1 | SnmpAdminString (SIZE(1..255)) | not-accessible | current |
| alaDaUNPFQDNResolvedIPAddressType OBJECT-TYPE IP Address type of FQDN resolved ip. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.79.1.2 | InetAddressType {ipv4(1)} | not-accessible | current |
| alaDaUNPFQDNResolvedIPAddress OBJECT-TYPE IP Address of FQDN resolved ip. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.79.1.3 | InetAddress | not-accessible | current |
| alaDaUNPFQDNResolvedIPAddressStatus OBJECT-TYPE The FQDN ipaadr status defines wheather the configured Ip is programmed in HW or not | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.79.1.4 | INTEGER {programmed(1), notProgrammed(2)} | read-only | current |
| alaDaUNPProfileMapVplsTable OBJECT-TYPE This table stores the Service Classification profiles created in the system. The entries provides information to classify device in the Vpls Service domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80 | not-accessible | current | |
| alaDaUNPProfileVplsEntry OBJECT-TYPE Vpls Service Classification Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1 | not-accessible | current | |
| alaDaUNPProfileMapVplsEncapVal OBJECT-TYPE The encapsulation to be used for the SAP connecting to the service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1.1 | TmnxEncapVal | read-create | current |
| alaDaUNPProfileMapVplsID OBJECT-TYPE The object represent the Vpls ID that is to be used to dynamically create a Vpls service. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1.2 | Unsigned32 (1..2147483647) | read-create | current |
| alaDaUNPProfileMapVplsLdpFarEndIPList OBJECT-TYPE The name of the Far End IP List that will be used if this User Network Profile is applied for a given device. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1.3 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| alaDaUNPProfileMapVplsBgpVeID OBJECT-TYPE The object represent the Vpls bgp ve ID. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1.4 | Unsigned32 (1..16777215) | read-create | current |
| alaDaUNPProfileMapVplsVlanXlation OBJECT-TYPE To enable/disable the vlan translation for Vpls . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1.5 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapVplsRemoveIngressTag OBJECT-TYPE To enable/disable the remove ingress tag for Vpls . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1.6 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaDaUNPProfileMapVplsRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.80.1.7 | RowStatus | read-create | current |
| alaDaUNPVplsFarEndIPListTable OBJECT-TYPE Table shows all the Far-End-IP-Lists configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.81 | not-accessible | current | |
| alaDaUNPVplsFarEndIPListEntry OBJECT-TYPE Far-end IP List entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.81.1 | not-accessible | current | |
| alaDaUNPVplsFarEndIPListName OBJECT-TYPE Name of the Far-End-IP list configured. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.81.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaDaUNPVplsFarEndIPListIPAddressCount OBJECT-TYPE The count of the IP Addresses configured for the corresponding Far-End-IP-List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.81.1.2 | Unsigned32 | read-only | current |
| alaDaUNPVplsFarEndIPListRemove OBJECT-TYPE This object is used to remove a Far-End-IP-List. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.81.1.3 | INTEGER {no(1), yes(2)} | read-write | current |
| alaDaUNPVplsFarEndIPAddressListTable OBJECT-TYPE Table to configure the Far-End-List and the IP Addresses for that list. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.82 | not-accessible | current | |
| alaDaUNPVplsFarEndIPAddressListEntry OBJECT-TYPE Far-end IP Address List entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.82.1 | not-accessible | current | |
| alaDaUNPVplsFarEndIPAddressListIPType OBJECT-TYPE The IP address type of the IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.82.1.1 | InetAddressType {ipv4(1)} | not-accessible | current |
| alaDaUNPVplsFarEndIPAddressListIP OBJECT-TYPE The Far-End IP address. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.82.1.2 | InetAddress | not-accessible | current |
| alaDaUNPVplsFarEndIPAddressListRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.82.1.3 | RowStatus | read-create | current |
| alaDaUNPProfileTrustTaggedVlanTable OBJECT-TYPE This table stores the trust tagged VLAN Profile config. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.83 | not-accessible | current | |
| alaDaUNPProfileTrustTaggedVlanEntry OBJECT-TYPE Trust tagged VLAN Profile entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.83.1 | not-accessible | current | |
| alaDaUNPProfileTrustTaggedVlanIDStart OBJECT-TYPE Trust tagged vlan start ID. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.83.1.1 | Unsigned32 (1..4096) | not-accessible | current |
| alaDaUNPProfileTrustTaggedVlanIDEnd OBJECT-TYPE Trust tagged vlan End ID. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.83.1.2 | Unsigned32 (1..4096) | read-create | current |
| alaDaUNPProfileTrustTaggedVlanRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.83.1.3 | RowStatus | read-create | current |
| alaDaUNPApModeMacOuiTable OBJECT-TYPE This table stores the ap mode mac oui config. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.84 | not-accessible | current | |
| alaDaUNPApModeMacOuiEntry OBJECT-TYPE Ap mode mac oui entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.84.1 | not-accessible | current | |
| alaDaUNPApModeMacOui OBJECT-TYPE Ap mode mac oui. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.84.1.1 | MacOui | not-accessible | current |
| alaDaUNPApModeMacOuiRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.84.1.2 | RowStatus | read-create | current |
| alaIND1DaMIBConformance OBJECT-IDENTITY Branch for DA Module MIB Subsystem Conformance Information. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2 | current | ||
| alaIND1DaMIBGroups OBJECT-IDENTITY Branch for DA Module MIB Subsystem Units of Conformance. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1 | current |
Notifications
| Name | OID | Status |
|---|---|---|
| unpMcLagMacIgnored NOTIFICATION-TYPE This trap is generated if a MAC/User is dropped due to vlan not existing or UNP is not enabled on the MCLAG | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.1 | current |
| unpMcLagConfigInconsistency NOTIFICATION-TYPE This trap is generated when configuration becomes Out_of_Sync. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.2 | current |
| alaDaKerberosReqTimeoutTrap NOTIFICATION-TYPE This trap shall be raised when the KERBEROS server do not reply in time. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.3 | current |
| alaDaKerberosInactivityTimerExpiryTrap NOTIFICATION-TYPE The trap shall be raised when the KERBEROS lease timer get expired for the user | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.4 | current |
| alaDaKerberosRateLimitExceed NOTIFICATION-TYPE This trap shall be raised when the kerberos packets exceed the Limit. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.5 | obsolete |
| alaDaRouterAuthUserPassedAuthThreshold NOTIFICATION-TYPE This trap will be generated when the number of IP addresses that passed authentication reaches the threshold (default 16). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.6 | current |
| alaDaRouterAuthUserMaxRetryFailed NOTIFICATION-TYPE This trap will be generated for every IP address whose number of authentication failure exceeds maximum attempts (default is 3 times). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.7 | current |
| alaDaRouterAuthUserFailedAuthThreshold NOTIFICATION-TYPE This trap will be generated if the number of IP addresses that failed to authenticate reaches the threshold (default 16). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.8 | current |
| alaDaRouterAuthConfigThresholdExceed NOTIFICATION-TYPE This trap will be generated if more than 50 percent of slice or the reserved block is used up for programming the trap rule. It indicates that no more source or destination subnets can be added. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.9 | current |
| alaDaRouterAuthMaxCapacityReached NOTIFICATION-TYPE This trap will be generated when the total slice capacity of 256 is reached. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.10 | current |
| alaDaUnpMaxUserExceeded NOTIFICATION-TYPE This trap will be generated when max UNP user exceeded in system. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.11 | current |
| alaDaUnpHWResourceExhaust NOTIFICATION-TYPE This trap will be generated when the exhaust of TTI resources on a NI slot (chassis/slot). | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.12 | current |
| alaDaUnpDnsServerNotReachable NOTIFICATION-TYPE The trap will be raised when allowed web server FQDN could not be resolved. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.13 | current |
| alaDaUnpUserAuthSupplicantFails NOTIFICATION-TYPE The trap will be raised when switch fails authentication. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.14 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| alaDaUserNetProfileGroup OBJECT-GROUP Collection of DA objects for UNP Table | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.1 | deprecated |
| alaDaUNPIpNetRuleGroup OBJECT-GROUP Collection of DA objects for system level UNP Ip rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.2 | current |
| alaDaUNPMacRuleGroup OBJECT-GROUP Collection of DA objects for system level UNP Mac Rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.3 | current |
| alaDaUNPMacRangeGroup OBJECT-GROUP Collection of DA objects for system level UNP Mac Range Rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.4 | current |
| alaDaUNPVlanTagGroup OBJECT-GROUP Collection of DA objects for system level Vlan Tag Rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.5 | current |
| alaDaMacUserGroup OBJECT-GROUP Collection of DA objects for UNP Mac User | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.6 | current |
| alaDaUNPPortGroup OBJECT-GROUP Collection of DA UNP Ports | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.7 | current |
| alaDaUNPGlobalGroup OBJECT-GROUP Collection of DA objects for Global parameters | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.8 | current |
| alaDaNotificationObjectGroup OBJECT-GROUP Collection of DA objects for Notifications | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.9 | current |
| alaDaNotificationsGroup NOTIFICATION-GROUP Collection of Notifications for management of DA. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.10 | current |
| alaDaMacVlanUserGroup OBJECT-GROUP Collection of DA objects for UNP Mac User | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.11 | current |
| alaDaUnpCustomerDomainGroup OBJECT-GROUP Collection of DA objects for UNP Group | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.12 | current |
| alaDaSpbProfileGroup OBJECT-GROUP Collection of DA objects for Service Classification Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.13 | obsolete |
| alaDaUNPCustDomainEvbGpIdRuleGroup OBJECT-GROUP Collection of DA objects for system level EVB Group ID Rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.14 | current |
| alaDaUNPCustDomainVlanTagRuleGroup OBJECT-GROUP Collection of DA objects for system level Vlan Tag Rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.15 | current |
| alaDaUNPCustDomainIpNetRuleGroup OBJECT-GROUP Collection of DA objects for system level UNP Ip rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.16 | current |
| alaDaUNPCustDomainMacRuleGroup OBJECT-GROUP Collection of DA objects for system level UNP Mac Rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.17 | current |
| alaDaUNPCustDomainMacRangeGroup OBJECT-GROUP Collection of DA objects for system level UNP Mac Range Rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.18 | current |
| alaDaUNPGroupObjects OBJECT-GROUP Collection of DA objects created to keep SNMP4J compiler happy. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.19 | current |
| alaDaSaaProfileGroup OBJECT-GROUP Collection of DA objects for SAA Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.20 | current |
| alaDaCPortalGroup OBJECT-GROUP Collection of Captive Portal objects . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.21 | current |
| alaDaHICGroup OBJECT-GROUP Collection of HIC objects . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.22 | current |
| alaDaUNPEdgeTemplateGroup OBJECT-GROUP Collection of UNP Edge Template Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.23 | deprecated |
| alaDaUNPEdgeProfileGroup OBJECT-GROUP Collection of UNP Edge Profile Table Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.24 | deprecated |
| alaDaUNPClassificationRuleGroup OBJECT-GROUP Collection of UNP Classification Rule Port Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.25 | current |
| alaDaUNPGroupIdEdgeClassifyGroup OBJECT-GROUP Collection of UNP Classification Rule Port Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.26 | deprecated |
| alaDaUNPMacOuiGroup OBJECT-GROUP Collection of UNP MAC Oui Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.27 | current |
| alaDaUNPEndPointGroup OBJECT-GROUP Collection of UNP MAC Oui Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.28 | current |
| alaDaUNPAuthRuleGroup OBJECT-GROUP Collection of UNP Authentication Rule Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.29 | current |
| alaDaUNPRuleGroup OBJECT-GROUP Collection of UNP Rule Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.30 | current |
| alaDaUNPMacPortClassifyGroup OBJECT-GROUP Collection of Objects for Mac & Port based classification rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.31 | current |
| alaDaUNPIpPortClassifyGroup OBJECT-GROUP Collection of Objects for Ip & port based classification rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.32 | current |
| alaDaUNPMacIpClassifyGroup OBJECT-GROUP Collection of Objects for Mac, Ip & port based classification rule. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.33 | current |
| alaDaUNPMacClassifyGroup OBJECT-GROUP Collection of Objects for Mac Address and Group classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.34 | deprecated |
| alaDaUNPIpAddressGroup OBJECT-GROUP Collection of Objects for IP and Group Classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.35 | deprecated |
| alaDaUNPMacIpGroup OBJECT-GROUP Collection of objects for UNP MAC, IP and Group Classification. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.36 | deprecated |
| alaDaUNPUserRoleGroup OBJECT-GROUP Collection of UNP User Role Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.37 | current |
| alaDaUNPRestrictedRoleGroup OBJECT-GROUP Collection of UNP Restricted Role Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.38 | current |
| alaDaUNPVlanMappingGroup OBJECT-GROUP Collection of UNP Vlan Mapping Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.39 | deprecated |
| alaDaUNPGroup OBJECT-GROUP Collection of Objects for UNP Group Creation and Deletion. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.40 | deprecated |
| alaDaUNPEdgeFlushGroup OBJECT-GROUP Collection of UNP Port Edge Flush Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.41 | current |
| alaDaUNPMacAddrsRuleGroup OBJECT-GROUP Collection of UNP MAC Edge Flush Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.42 | deprecated |
| alaDaUNPMacRangesGroup OBJECT-GROUP Collection of UNP MAC Edge Flush Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.43 | deprecated |
| alaDaUNPIpMaskGroup OBJECT-GROUP Collection of UNP MAC Edge Flush Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.44 | deprecated |
| alaDaQMRGroup OBJECT-GROUP Collection of QMR objects . | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.45 | current |
| alaDaUNPValidityPeriodGroup OBJECT-GROUP Collection of UNP Validity Period Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.46 | current |
| alaDaUNPLocationPolicyGroup OBJECT-GROUP Collection of UNP Location Policy Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.47 | current |
| alaDaUNPRedirectAllowedServerGroup OBJECT-GROUP Collection of UNP Redirect Allowed Server Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.48 | current |
| alaDaMacVlanUserExtGroup OBJECT-GROUP Collection of Mac Vlan User Extended Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.49 | current |
| alaDaUNPVxlanProfileGroup OBJECT-GROUP Collection of DA objects for VXLAN Service Classification Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.50 | obsolete |
| alaDaUNPVxlanFlushGroup OBJECT-GROUP Collection of DA objects for VXLAN Users Flush Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.51 | obsolete |
| alaDaUNPVxlanFarEndIPListGroup OBJECT-GROUP Collection of DA objects for VXLAN Far-End-IP Lists Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.52 | current |
| alaDaUNPVxlanFarEndIPAddressListGroup OBJECT-GROUP Collection of DA objects for VXLAN Far-End-IP Lists Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.53 | current |
| alaDaUNPSpbFlushGroup OBJECT-GROUP Collection of DA objects for SPB Users Flush Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.54 | obsolete |
| alaDaKerberosGroup OBJECT-GROUP Collection of objects for the management of Kerberos Global configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.55 | current |
| alaDaUNPVlanGroup OBJECT-GROUP Collection of UNP VlanTag ClassificationRule Objects. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.56 | current |
| alaDaUNPPortVlanGroup OBJECT-GROUP Collection of objects for the management of UNP static Port-Vlan configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.57 | current |
| alaDaUNPETmplVlanGroup OBJECT-GROUP Collection of objects for the management of UNP Edge Template configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.58 | current |
| alaDaUNPUserFlushGroup OBJECT-GROUP Collection of DA objects for Access Users Flush Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.59 | current |
| alaDaUNPCustDomainRuleGroup OBJECT-GROUP Collection of DA objects for Customer Domain Rule Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.60 | current |
| alaDaUNPPortTemplateGroup OBJECT-GROUP Collection of objects for the management of UNP Template configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.61 | current |
| alaDaUNPProfileGroup OBJECT-GROUP Collection of DA objects for UNP Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.62 | current |
| alaDaUNPProfileMapVlanGroup OBJECT-GROUP Collection of DA objects for VLAN Classification Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.63 | current |
| alaDaUNPProfileMapSpbGroup OBJECT-GROUP Collection of DA objects for VLAN Service Classification Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.64 | current |
| alaDaUNPProfileMapVxlanGroup OBJECT-GROUP Collection of DA objects for VXLAN Service Classification Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.65 | current |
| alaDaUNPProfileMapStaticGroup OBJECT-GROUP Collection of DA objects for Static Classification Profile. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.66 | current |
| alaDaUNPCustDomainMacIpRuleGroup OBJECT-GROUP Collection of DA objects for system level UNP Mac, Ip and Domain Id rule | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.67 | current |
| alaDaUNPPortTemplateVlanGroup OBJECT-GROUP Collection of objects for the management of UNP Port Template configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.68 | current |
| alaDaUNPWlanConfigurationGroup OBJECT-GROUP Collection of objects for the management of WLAN configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.69 | current |
| alaDaUNPProfileMapL2GreGroup OBJECT-GROUP Collection of objects for the management of UNP profile map with Vpn Id. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.70 | current |
| alaDaUNPL2GreFarEndIPListGroup OBJECT-GROUP Collection of objects for L2GRE Far-End-IP Lists Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.71 | current |
| alaDaUNPL2GreFarEndIPAddressListGroup OBJECT-GROUP Collection of objects for L2GRE Far-End-IP Lists Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.72 | current |
| alaDaUNPNetworkGroupNameGroup OBJECT-GROUP Collection of objects for the management Network Group Name. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.73 | current |
| alaDaUNPRouterAuthUserGroup OBJECT-GROUP Collection of objects for the management Router Authentication Group. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.74 | current |
| alaDaUNPRouterAuthenticationConfigGroup OBJECT-GROUP Collection of objects for the management Router Authentication Config Group. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.75 | current |
| alaDaUNPRouterAuthenticationFlushGroup OBJECT-GROUP Collection of objects for the management Router Authentication Flush Group. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.76 | current |
| alaDaUNPPortProfileGroup OBJECT-GROUP Collection of objects for the management of UNP Port Profile configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.77 | current |
| alaDaUNPPortTemplateProfileGroup OBJECT-GROUP Collection of objects for the management of UNP Port Template Profile configuration. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.78 | current |
| alaDaUNPRouterAuthenticationUserGroup OBJECT-GROUP Collection of objects for the management UNP Router Authentication User. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.79 | current |
| alaDaUNPRedirectAllowedWebServerGroup OBJECT-GROUP Collection of objects for the management UNP Redirect allowed web server. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.80 | current |
| alaDaUNPFQDNResolvedIPGroup OBJECT-GROUP Collection of objects for the management UNP FQDN resolved ip addresses. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.81 | current |
| alaDaUNPProfileMapVplsGroup OBJECT-GROUP Collection of objects for the management of UNP profile map Vpls service domain. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.82 | current |
| alaDaUNPVplsFarEndIPListGroup OBJECT-GROUP Collection of objects for Vpls Far-End-IP Lists Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.83 | current |
| alaDaUNPVplsFarEndIPAddressListGroup OBJECT-GROUP Collection of objects for Vpls Far-End-IP Lists Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.84 | current |
| alaDaUNPProfileTrustTaggedVlanGroup OBJECT-GROUP Collection of objects for profile trust tagged VLAN Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.85 | current |
| alaDaUNPApModeMacOuiGroup OBJECT-GROUP Collection of objects for ap mode mac oui Table. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.86 | current |
| alaIND1DaMIBCompliances MODULE-COMPLIANCE Compliance statement for Alcatel DA module. | 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.2 | current |