MIBs Depot

ALCATEL-IND1-LPS-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.8.2
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2019-11-27 00:00, 2010-05-13 00:00, 2007-04-03 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-LPS-MIB
Digest
sha256:92416a5a9a4f89c577431c5f9ff7b49bbff2a2b9f3d037457bda5dcbe0e5e0fb

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the OmniSwitch Product Line, this is the MIB module for address learning mac addresses entity. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEsoftentIND1MacAddress
ALCATEL-IND1-SYSTEM-MIBsystemServicesDate, systemServicesTime
IF-MIBInterfaceIndex, ifIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-LPS-MIB
ALCATEL-IND1-SYSTEM-MIB
ALCATEL-IND1-VIRTUAL-CHASSIS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IPV6-TC
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
alcatelIND1LearnedPortSecurityMIBNotifications
OBJECT-IDENTITY
Branch For LAG MIB Subsystem Notifications.
1.3.6.1.4.1.6486.801.1.2.1.8.2.0current
alcatelIND1LearnedPortSecurityMIBObjects
OBJECT-IDENTITY
Branch For Learned Port Security Module MIB Subsystem Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1current
learnedPortSecurityTable
OBJECT-TYPE
A table contains Learned Port Security information.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1not-accessiblecurrent
learnedPortSecurityEntry
OBJECT-TYPE
Definition of the Learned Port Security port security table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1not-accessiblecurrent
lpsViolationOption
OBJECT-TYPE
The handle option for LPS violation
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.1INTEGER {restrict(1), shutdown(2), discard(3)}read-createcurrent
lpsMaxMacNum
OBJECT-TYPE
The maximum number of MAC addresses that the LPS port could learn.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.2Integer32 (1..1000)read-createcurrent
lpsLoMacRange
OBJECT-TYPE
The low end of Mac range which is allowed to be learned on LPS port. Deprecated by lpsL2LowMacAddress.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.3MacAddressread-createdeprecated
lpsHiMacRange
OBJECT-TYPE
The high end of Mac range which is allowed to be learned on LPS port. Deprecated by lpsL2HighMacAddress.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.4MacAddressread-createdeprecated
lpsAdminStatus
OBJECT-TYPE
This object specifies the desired administrative state of the Learned Port Security feature on this port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.5INTEGER {enabled(1), disabled(2), locked(3)}read-createcurrent
lpsOperStatus
OBJECT-TYPE
This object identifies the current operational state of the LPS port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.6INTEGER {up(1), down(2), securityViolated(3), locked(4)}read-onlycurrent
lpsRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.7RowStatusread-createcurrent
lpsRelease
OBJECT-TYPE
This object causes the release of LPS port if it is in violated state.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.8INTEGER {release(1)}read-createcurrent
lpsMaxFilteredMacNum
OBJECT-TYPE
The maximum number of Filtered MAC addresses that the LPS port could learn. The default is 5.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.9Integer32 (0..100)read-createcurrent
lpsLearnTrapThreshold
OBJECT-TYPE
When the number of bridged MACs learned goes over this value, a trap will be generated for every additional MAC that is learned.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.10Integer32 (0..1000)read-createcurrent
lpsViolatingMac
OBJECT-TYPE
The MAC Address which cause the Violation on this Port. This field is set when LPS port is in Violated state, it is cleared when Port comes out of violation
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.11MacAddressread-onlycurrent
lpsPacketRelay
OBJECT-TYPE
Enable/disable packet relay on a port-security port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.12INTEGER {enable(1), disable(2)}read-createcurrent
learnedPortSecurityGlobalGroup
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3
lpsLearningWindowTime
OBJECT-TYPE
The learning time window that can be configured on the switch to learn new MACs on the LPS port. This paramater applies to the whole switch and the granularity is in minutes.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.1Integer32 (0..2880)read-writecurrent
lpsLearningWindowTimeWithStaticConversion
OBJECT-TYPE
If it is enabled, when the learning window is expired, the dynamic MACs learned on all LPS ports will be converted to static. It is configurable only when the learning window is enabled.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.2INTEGER {enable(1), disable(2)}read-writecurrent
lpsConvertToStatic
OBJECT-TYPE
It converts the L2 addresses learned on the given port in IfIndex format from dynamic to static, Value 2147483647 converts the L2 addresses learned for all ports.Zero indicates no port in convert-to-static state.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.3Integer32 (0 | 2147483647 | 1001..17000)read-writecurrent
lpsLearningWindowNoAging
OBJECT-TYPE
If it is enabled, all mac-address learnt on the port would be deffered from aging
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.4INTEGER {enable(1), disable(2)}read-writecurrent
lpsLearningWindowBootupStatus
OBJECT-TYPE
If it is enabled, Learning window will start at boot-up time
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.5INTEGER {enable(1), disable(2)}read-writecurrent
lpsLearningWindowTimeRemaining
OBJECT-TYPE
Amount of time (in seconds) remaining until the learning window expires.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.6Integer32 (0..172800)read-onlycurrent
lpsLearningWindowLearnAsStatic
OBJECT-TYPE
If it is enabled, all mac-address learnt on the port would be directly converted to static.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.7INTEGER {enable(1), disable(2)}read-writecurrent
lpsLearningWindowPseudoMacMove
OBJECT-TYPE
If it is enabled, pseudo-static MACs will be subject to MAC move.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.8INTEGER {enable(1), disable(2)}read-writecurrent
learnedPortSecurityL2MacAddressTable
OBJECT-TYPE
A table contains Learned Port Security L2 Mac addresses.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4not-accessiblecurrent
learnedPortSecurityL2MacAddressEntry
OBJECT-TYPE
Definition of the Learned Port Security port security mac-address table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1not-accessiblecurrent
lpsL2VlanId
OBJECT-TYPE
The Vlan Id assigned to the packet.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.1Integer32 (1..4094)not-accessiblecurrent
lpsL2MacAddress
OBJECT-TYPE
The MacAddress that is either configured or dynamically learnt on the LPS port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.2MacAddressnot-accessiblecurrent
lpsL2MacAddressLearnType
OBJECT-TYPE
Learned L2 MAC address type.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.3INTEGER {configured(1), dynamic(2), filtered(3), quarantined(4)}read-onlycurrent
lpsL2MacAddressRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.4RowStatusread-createcurrent
lpsTrapsObj
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5
lpsTrapSwitchName
OBJECT-TYPE
The name of the switch.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.1SnmpAdminString (SIZE(1..255))read-onlycurrent
lpsTrapSwitchIpAddr
OBJECT-TYPE
The IP address of switch.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.2IpAddressread-onlycurrent
lpsTrapSwitchSlice
OBJECT-TYPE
The physical slice number for the LPS port on which violation occured.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.3Integer32read-onlydeprecated
lpsTrapSwitchPort
OBJECT-TYPE
The physical port number on which violation occured.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.4Integer32read-onlydeprecated
lpsTrapViolatingMac
OBJECT-TYPE
The violating MAC address.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.5MacAddressread-onlycurrent
lpsTrapViolationType
OBJECT-TYPE
The type of violation that occured on the LPS port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.6INTEGER {restrict(1), shutdown(2), discard(3)}read-onlycurrent
lpsTrapSwitchVlan
OBJECT-TYPE
The VLAN number on which violation occured.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.7Integer32read-onlycurrent
lpsTrapBridgeMac
OBJECT-TYPE
The Bridge MAC address when learn trap threshold exceeds.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.8MacAddressread-onlycurrent
lpsTrapIfIndex
OBJECT-TYPE
The ifIndex of the physical port on which violation occured.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.9InterfaceIndexread-onlycurrent
learnedPortSecurityAgL2MacAddressTable
OBJECT-TYPE
A table contains Learned Port Security L2 Mac addresses.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.6not-accessiblecurrent
learnedPortSecurityAgL2MacAddressEntry
OBJECT-TYPE
Definition of the Learned Port Security port security mac-address table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.6.1not-accessiblecurrent
lpsAgL2MacAddress
OBJECT-TYPE
The MacAddress that is either configured or dynamically learnt on the LPS port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.6.1.1MacAddressnot-accessiblecurrent
lpsAgL2VlanId
OBJECT-TYPE
The Vlan Id assigned to the packet.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.6.1.2Integer32 (1..4094)not-accessiblecurrent
lpsAgL2MacAddressLearnType
OBJECT-TYPE
Learned L2 MAC address type.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.6.1.3INTEGER {configured(1), dynamic(2), filtered(3), quarantined(4), configuredFiltered(5), pseudoStatic(6)}read-onlycurrent
lpsAgL2MacAddressRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.6.1.4RowStatusread-createcurrent
learnedPortSecurityL2MacRangeTable
OBJECT-TYPE
A table contains Learned Port Security L2 Mac Range addresses.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.7not-accessiblecurrent
learnedPortSecurityL2MacRangeEntry
OBJECT-TYPE
Definition of the Learned Port Security port security mac range table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.7.1not-accessiblecurrent
lpsL2LowMacAddress
OBJECT-TYPE
The Low MacAddress is configured by the user on the LPS port for validation.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.7.1.1MacAddressnot-accessiblecurrent
lpsL2HighMacAddress
OBJECT-TYPE
The High MacAddress is configured by the user on the LPS port for validation.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.7.1.2MacAddressread-createcurrent
lpsL2MacRangeRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.7.1.3RowStatusread-createcurrent
learnedPortSecuritySAPTable
OBJECT-TYPE
A table contains Learned Port Security service access port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8not-accessibleobsolete
learnedPortSecuritySAPEntry
OBJECT-TYPE
Definition of the Learned Port Security service access port table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1not-accessibleobsolete
lpsSAPPortId
OBJECT-TYPE
The ID of the access port where this SAP is defined.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.1InterfaceIndexnot-accessibleobsolete
lpsSAPEncapValue
OBJECT-TYPE
The value of the label used to identify this SAP on the access port specified by sapPortId.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.2Unsigned32not-accessibleobsolete
lpsSAPAdminStatus
OBJECT-TYPE
This object specifies the desired administrative state of the Learned Port Security SAP feature.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.3INTEGER {enabled(1), disabled(2), locked(3)}read-createobsolete
lpsSAPConvertToStatic
OBJECT-TYPE
It converts the L2 addresses learned on the given port in IfIndex format from dynamic to static, Value 2147483647 converts the L2 addresses learned for all ports. Zero indicates no port in convert-to-static state.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.4Integer32 (0 | 2147483647 | 1001..17000)read-createobsolete
lpsSAPLearnTrapThreshold
OBJECT-TYPE
When the number of bridged MACs learned goes over this value, a trap will be generated for every additional MAC that is learned.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.5Integer32 (0..1000)read-createobsolete
lpsSAPMaxMacNum
OBJECT-TYPE
The maximum number of MAC addresses that the LPS SAP could learn.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.6Integer32 (1..1000)read-createobsolete
lpsSAPMaxFilteredMacNum
OBJECT-TYPE
The maximum number of Filtered MAC addresses that the LPS SAP could learn. The default is 5.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.7Integer32 (0..100)read-createobsolete
lpsSAPViolationRestrict
OBJECT-TYPE
The handle option for LPS SAP violation restrict.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.8INTEGER {enable(1), disable(2)}read-createobsolete
lpsSAPViolationRecoveryMax
OBJECT-TYPE
SAP violation recovery maximum. Value 0 means SAP recovery is disabled for any ports using this value. Value -1 means SAP recovery will infinitely for any ports using this value.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.9Integer32 (-1..50)read-createobsolete
lpsSAPViolationRecoveryTime
OBJECT-TYPE
Time (in seconds) between SAP violation recovery for any ports using this value.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.10Integer32 (30..600)read-createobsolete
lpsSAPRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.14RowStatusread-createobsolete
lpsSAPViolationClear
OBJECT-TYPE
The handle option for LPS SAP violation clear.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.15INTEGER {default(1), clear(2)}read-createobsolete
lpsSAPOperStatus
OBJECT-TYPE
This object identifies the current operational state of the LPS SAP port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.16INTEGER {up(1), down(2), securityViolated(3), locked(4)}read-onlyobsolete
lpsSAPViolatingMac
OBJECT-TYPE
The MAC Address which cause the Violation on this Port. This field is set when LPS SAP port is in Violated state, it is cleared when Port comes out of violation
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.8.1.17MacAddressread-onlyobsolete
learnedPortSecuritySAPMacAddressTable
OBJECT-TYPE
A table contains Learned Port Security service access port mac addresses.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.9not-accessibleobsolete
learnedPortSecuritySAPMacAddressEntry
OBJECT-TYPE
Definition of the Learned Port Security service access port mac address table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.9.1not-accessibleobsolete
lpsSAPL2LowMacAddress
OBJECT-TYPE
The Low MacAddress is configured by the user on the LPS SAP port for validation.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.9.1.1MacAddressnot-accessibleobsolete
lpsSAPL2HighMacAddress
OBJECT-TYPE
The High MacAddress is configured by the user on the LPS SAP port for validation. Value '00:00:00:00:00:00' means this table will be destroyed.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.9.1.2MacAddressread-createobsolete
lpsSAPMacAddressRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.9.1.3RowStatusread-createobsolete
lpsSAPL2MacAddressLearnType
OBJECT-TYPE
Learned port security SAP MAC address type.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.9.1.4INTEGER {configured(1), dynamic(2), filtered(3), quarantined(4), configuredFiltered(5), pseudoStatic(6)}read-onlyobsolete
learnedPortSecurityPacketRelayProtocol
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10
lpsPacketRelayIcmpStatus
OBJECT-TYPE
Enable/disable packets with Icmp protocol as filter for packet relay.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.1INTEGER {enable(1), disable(2)}read-writecurrent
lpsPacketRelayIgmpStatus
OBJECT-TYPE
Enable/disable packets with Igmp protocol as filter for packet relay.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.2INTEGER {enable(1), disable(2)}read-writecurrent
lpsPacketRelayUdpStatus
OBJECT-TYPE
Enable/disable packets with UDP protocol as filter for packet relay.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.3INTEGER {enable(1), disable(2)}read-writecurrent
lpsPacketRelaySourceUdpPortStart
OBJECT-TYPE
Source UDP port range start for packet relay feature.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.4Integer32 (0..65535)read-writecurrent
lpsPacketRelaySourceUdpPortEnd
OBJECT-TYPE
Source UDP port range end for packet relay feature.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.5Integer32 (0..65535)read-writecurrent
lpsPacketRelaySourceUdpStatus
OBJECT-TYPE
Enable/disable source UDP port range.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.6INTEGER {enable(1), disable(2)}read-writecurrent
lpsPacketRelayDestinationUdpPortStart
OBJECT-TYPE
Destination UDP port range start for packet relay feature.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.7Integer32 (0..65535)read-writecurrent
lpsPacketRelayDestinationUdpPortEnd
OBJECT-TYPE
Destination UDP port range end for packet relay feature.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.8Integer32 (0..65535)read-writecurrent
lpsPacketRelayDestinationUdpStatus
OBJECT-TYPE
Enable/disable destination UDP port range.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.10.9INTEGER {enable(1), disable(2)}read-writecurrent
learnedSAPPortSecurityTable
OBJECT-TYPE
A table contains Learned Port Security service access port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11not-accessiblecurrent
learnedSAPPortSecurityEntry
OBJECT-TYPE
Definition of the Learned Port Security service access port table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1not-accessiblecurrent
learnedSAPPortId
OBJECT-TYPE
The ID of the access port where this SAP is defined.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.1InterfaceIndexnot-accessiblecurrent
learnedSAPEncapValue
OBJECT-TYPE
The value of the label used to identify this SAP on the access port specified by sapPortId.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.2Unsigned32not-accessiblecurrent
learnedSAPAdminStatus
OBJECT-TYPE
This object specifies the desired administrative state of the Learned Port Security SAP feature.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.3INTEGER {enabled(1), disabled(2), locked(3)}read-createcurrent
learnedSAPConvertToStatic
OBJECT-TYPE
It converts the L2 addresses learned on the given port in IfIndex format from dynamic to static, Value 2147483647 converts the L2 addresses learned for all ports. Zero indicates no port in convert-to-static state.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.4Integer32 (0 | 2147483647 | 1001..17000)read-createcurrent
learnedSAPLearnTrapThreshold
OBJECT-TYPE
When the number of bridged MACs learned goes over this value, a trap will be generated for every additional MAC that is learned.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.5Integer32 (0..1000)read-createcurrent
learnedSAPMaxMacNum
OBJECT-TYPE
The maximum number of MAC addresses that the LPS SAP could learn.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.6Integer32 (1..1000)read-createcurrent
learnedSAPMaxFilteredMacNum
OBJECT-TYPE
The maximum number of Filtered MAC addresses that the LPS SAP could learn. The default is 5.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.7Integer32 (0..100)read-createcurrent
learnedSAPViolationRestrict
OBJECT-TYPE
The handle option for LPS SAP violation restrict.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.8INTEGER {enable(1), disable(2)}read-createcurrent
learnedSAPViolationRecoveryMax
OBJECT-TYPE
SAP violation recovery maximum. Value 0 means SAP recovery is disabled for any ports using this value. Value -1 means SAP recovery will infinitely for any ports using this value.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.9Integer32 (-1..50)read-createcurrent
learnedSAPViolationRecoveryTime
OBJECT-TYPE
Time (in seconds) between SAP violation recovery for any ports using this value.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.10Integer32 (30..600)read-createcurrent
learnedSAPRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.14RowStatusread-createcurrent
learnedSAPViolationClear
OBJECT-TYPE
The handle option for LPS SAP violation clear.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.15INTEGER {default(1), clear(2)}read-createcurrent
learnedSAPOperStatus
OBJECT-TYPE
This object identifies the current operational state of the LPS SAP port.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.16INTEGER {up(1), down(2), securityViolated(3), locked(4)}read-onlycurrent
learnedSAPViolatingMac
OBJECT-TYPE
The MAC Address which cause the Violation on this Port. This field is set when LPS SAP port is in Violated state, it is cleared when Port comes out of violation
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.11.1.17MacAddressread-onlycurrent
learnedPortSecuritySAPMacRangeTable
OBJECT-TYPE
A table contains Learned Port Security service access port mac range addresses.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.12not-accessiblecurrent
learnedPortSecuritySAPMacRangeEntry
OBJECT-TYPE
Definition of the Learned Port Security service access port mac range address table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.12.1not-accessiblecurrent
lpsSAPLowMacRange
OBJECT-TYPE
The Low Mac Range Address is configured by the user on the LPS SAP port for validation.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.12.1.1MacAddressnot-accessiblecurrent
lpsSAPHighMacRange
OBJECT-TYPE
The High Mac Range Address is configured by the user on the LPS SAP port for validation. Value '00:00:00:00:00:00' means this table will be destroyed.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.12.1.2MacAddressread-createcurrent
lpsSAPMacRangeRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.12.1.3RowStatusread-createcurrent
learnedPortSecuritySAPMacStaticTable
OBJECT-TYPE
A table contains Learned Port Security service access port mac static addresses.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.13not-accessiblecurrent
learnedPortSecuritySAPMacStaticEntry
OBJECT-TYPE
Definition of the Learned Port Security service access port mac static address table entries.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.13.1not-accessiblecurrent
lpsSAPMacStatic
OBJECT-TYPE
The Low Mac Static Address is configured by the user on the LPS SAP port for validation.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.13.1.1MacAddressnot-accessiblecurrent
lpsSAPMacStaticRowStatus
OBJECT-TYPE
The RowStatus for this table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.13.1.2RowStatusread-createcurrent
lpsSAPMacStaticLearnType
OBJECT-TYPE
Learned port security SAP MAC static address type.
1.3.6.1.4.1.6486.801.1.2.1.8.2.1.13.1.3INTEGER {configured(1), dynamic(2), filtered(3), quarantined(4), configuredFiltered(5), pseudoStatic(6)}read-onlycurrent
alcatelIND1LearnedPortSecurityMIBConformance
OBJECT-IDENTITY
Branch for Learned Port Security Module MIB Subsystem Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2current
alcatelIND1LearnedPortSecurityMIBGroups
OBJECT-IDENTITY
Branch for Learned Port Security Module MIB Subsystem Units of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1current
alcatelIND1LearnedPortSecurityMIBCompliances
OBJECT-IDENTITY
Branch for Learned Port Security Module MIB Subsystem Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.2current

Notifications

NameOIDStatus
lpsViolationTrap
NOTIFICATION-TYPE
Learned Port Security Violation Trap.
1.3.6.1.4.1.6486.801.1.2.1.8.2.0.1current
lpsPortUpAfterLearningWindowExpiredTrap
NOTIFICATION-TYPE
When an LPS port joins or is enabled after the Learning Window is expired, the MAC address learning on the port will be disabled, and this trap is generated as a notification.
1.3.6.1.4.1.6486.801.1.2.1.8.2.0.2current
lpsLearnMac
NOTIFICATION-TYPE
When the number of bridged MACs learned goes over the configured threshold value, a trap will be generated for every additional MAC that is learned.
1.3.6.1.4.1.6486.801.1.2.1.8.2.0.3current

Conformance

NameOIDStatus
learnedPortSecurityGroup
OBJECT-GROUP
Collection of objects for learned port security table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.1current
learnedPortSecurityGlobGroup
OBJECT-GROUP
Collection of objects for learned port security global group.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.2current
learnedPortSecurityTrapsGroup
NOTIFICATION-GROUP
Collection of notifications for learned port security.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.3current
learnedPortSecurityL2MacAddressGroup
OBJECT-GROUP
Collection of objects for learned port security MacAddress table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.4current
learnedPortSecurityTrapsObjGroup
OBJECT-GROUP
Collection of objects for learned port security Notofocation Object Group.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.6current
learnedPortSecurityNotificationGroup
NOTIFICATION-GROUP
Collection of notifications for LPS.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.7current
learnedPortSecurityL2MacRangeGroup
OBJECT-GROUP
Collection of objects for learned port security L2MacRange table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.8current
learnedPortSecuritySAPGroup
OBJECT-GROUP
Collection of objects for learned port security SAP table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.9current
learnedPortSecuritySAPMacAddressGroup
OBJECT-GROUP
Collection of objects for learned port security SAP mac address table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.10current
learnedPortSecurityPacketRelayProtocolGroup
OBJECT-GROUP
Collection of objects for learned port security packet relay protocol table.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.11current
alcatelIND1LearnedPortSecurityMIBCompliance
MODULE-COMPLIANCE
Compliance statement for Learned Port Security.
1.3.6.1.4.1.6486.801.1.2.1.8.2.2.2.1current