MIBs Depot

XF-RADIOLINK-RLT-MIB

Registered at
1.3.6.1.4.1.193.81.3.4.5
Last updated
2020-11-05 00:00
Organization
Ericsson AB
Revisions
2020-11-05 00:00, 2020-09-17 00:00, 2020-06-10 00:00, 2020-06-03 00:00, 2020-05-28 00:00, 2020-04-30 00:00, 2020-03-04 00:00, 2019-10-14 00:00, 2019-10-09 00:00, 2019-07-18 00:00, 2019-06-07 00:00, 2019-03-26 00:00, 2019-03-25 00:00, 2019-02-28 00:00, 2019-02-20 00:00, 2019-01-30 00:00, 2019-01-11 00:00, 2018-11-24 00:00, 2018-10-24 00:00, 2018-10-03 00:00, 2018-09-17 00:00, 2018-08-27 00:00, 2018-08-16 00:00, 2018-07-09 00:00, 2018-04-13 00:00, 2018-04-09 00:00, 2018-03-23 00:00, 2018-03-13 00:00, 2018-01-30 00:00, 2017-12-27 00:00, 2017-09-19 00:00, 2017-08-03 00:00, 2017-05-03 00:00, 2017-02-01 00:00, 2017-01-30 00:00, 2016-11-04 00:00, 2016-09-29 00:00, 2016-09-08 00:00, 2016-07-18 00:00, 2016-06-10 00:00, 2016-06-06 00:00, 2016-06-01 00:00, 2016-05-02 00:00, 2016-04-29 00:00, 2016-04-12 00:00, 2016-03-01 00:00, 2016-02-22 00:00, 2016-02-05 00:00, 2015-11-25 00:00, 2015-11-16 00:00, 2015-11-10 00:00, 2015-11-05 00:00, 2015-09-16 00:00, 2015-08-27 00:00, 2015-08-20 00:00, 2015-07-07 00:00, 2015-06-30 00:00, 2015-06-04 00:00, 2015-06-03 00:00, 2015-05-11 00:00, 2015-05-08 00:00, 2015-05-06 00:00, 2015-04-20 00:00, 2015-04-13 00:00, 2015-03-30 00:00, 2015-03-19 00:00, 2015-03-11 00:00, 2015-03-09 00:00, 2015-03-06 00:00, 2015-03-05 00:00, 2015-02-25 00:00, 2015-02-18 00:00, 2015-02-10 00:00, 2015-01-29 00:00, 2014-12-12 00:00, 2014-12-10 00:00, 2014-12-02 00:00, 2014-12-01 00:00, 2014-11-11 00:00
Namespace
ericsson
Source file
XF-RADIOLINK-RLT-MIB
Digest
sha256:d686e9519a154d4697d9d40c5cb24fe4c43589c1bada7dab2df651575fb7a46d

Description

This MIB defines objects for Radio Link Terminal (RLT) and Carrier Termination (CT) for new Radio Link application in MINI-LINK TN supporting dual carrier capability.

Contact

Ericsson AB BURA DURA SE-417 56 Goteborg Sweden

Imports

FromSymbols
ENTITY-MIBentLogicalIndex, entPhysicalIndex
HC-PerfHist-TC-MIBHCPerfCurrentCount
IF-MIBifIndex
INET-ADDRESS-MIBInetAddressIPv6
PerfHist-TC-MIBPerfCurrentCount, PerfIntervalCount
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue
XF-TOP-MIBxfRadioLink

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ENTITY-MIB
HC-PerfHist-TC-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
PerfHist-TC-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB
XF-RADIOLINK-RLT-MIB
XF-TOP-MIB

Textual conventions

NameOIDSyntaxAccessStatus
CarrierTermACMIndex
TEXTUAL-CONVENTION
This TC enumerates all possible ACM index values.
current

Objects

NameOIDSyntaxAccessStatus
xfRadioLinkRltObjects
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.5.1
xfChannelGroupTable
OBJECT-TYPE
This table lists all relationships, for ech Channel Group (CG), between the Bonding/RLP interface and the RL WAN interface and allows to configure CG as either Bonding or Radio Link protection (RLP).
1.3.6.1.4.1.193.81.3.4.5.1.1not-accessiblecurrent
xfChannelGroupEntry
OBJECT-TYPE
An entry in the xfChannelGroupTable.
1.3.6.1.4.1.193.81.3.4.5.1.1.1not-accessiblecurrent
cgIfIndex
OBJECT-TYPE
It is the ifIndex of WAN interface. The interface identified by atIfIndex is the same interface as identified by the same value of ifIndex.
1.3.6.1.4.1.193.81.3.4.5.1.1.1.1Integer32 (1..2147483647)read-onlycurrent
cgTypeIndex
OBJECT-TYPE
Index representing the Channel Group interface type: - Bonding (2) - RLP: Radio Link Protection (3)
1.3.6.1.4.1.193.81.3.4.5.1.1.1.2INTEGER {other(1), bonding(2), rlp(3)}read-onlycurrent
xfIfStatus
OBJECT-TYPE
This object defines the Channel Group interface type: either Bonding or RLP (Radio Link Protection). Default: notReady
1.3.6.1.4.1.193.81.3.4.5.1.1.1.3INTEGER {other(1), ready(2), notReady(3)}read-onlycurrent
xfLIMappingTable
OBJECT-TYPE
This table is used when navigating from a logical entity to interface, representing the relationship between: - RLT logical entity and either Bonding/RLP interface; - Carrier Termination (CT) logical entity and RAU IF interface.
1.3.6.1.4.1.193.81.3.4.5.1.2not-accessiblecurrent
xfLIMappingEntry
OBJECT-TYPE
An entry in the xfLIMappingTable.
1.3.6.1.4.1.193.81.3.4.5.1.2.1not-accessiblecurrent
liEntLogicalIndex
OBJECT-TYPE
The value of this object uniquely identifies the logical entity: RLT (Radio Link Terminal) and CT (Carrier Termination). The logical entity identified by liEntLogicalIndex is the same interface as identified by the same value of entLogicalIndex.
1.3.6.1.4.1.193.81.3.4.5.1.2.1.1Integer32 (1..2147483647)read-onlycurrent
liIfIndex
OBJECT-TYPE
It represents the ifIndex of Bonding/RLP interface and RAU IF. The interface identified by liIfIndex is the same interface as identified by the same value of ifIndex.
1.3.6.1.4.1.193.81.3.4.5.1.2.1.2Integer32 (1..2147483647)read-onlycurrent
xfLIName
OBJECT-TYPE
It represents the Name of the Radio Link Terminal (RLT) or Carrier Termination (CT).
1.3.6.1.4.1.193.81.3.4.5.1.2.1.3DisplayString (SIZE(0..31))read-onlycurrent
xfLIIfDescr
OBJECT-TYPE
A textual string containing information about the ifDescr of both Channel Group interface (either Bonding or RLP (Radio Link Protection)) and RAU IF interface.
1.3.6.1.4.1.193.81.3.4.5.1.2.1.4DisplayString (SIZE(0..31))read-onlycurrent
xfCarrierTerminationTable
OBJECT-TYPE
This table is used to configure the Carrier Termination (CT).
1.3.6.1.4.1.193.81.3.4.5.1.3not-accessiblecurrent
xfCarrierTerminationEntry
OBJECT-TYPE
An entry in the xfCarrierTerminationTable.
1.3.6.1.4.1.193.81.3.4.5.1.3.1not-accessiblecurrent
xfCarrierTermDistinguishedName
OBJECT-TYPE
It represents the distinguished name of the Carrier Termination in the format Rack/Slot/CT.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.1DisplayString (SIZE(0..31))read-onlycurrent
xfCarrierTermLabel
OBJECT-TYPE
Label identifying the Carrier Termination. It can be freely set by operator to label the Carrier Termination.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.2DisplayString (SIZE(0..31))read-writecurrent
xfCarrierTermOperStatus
OBJECT-TYPE
It represents the operative status of the Carrier Termination: - down(2) - up(3) - degraded(4) - testing(5)
1.3.6.1.4.1.193.81.3.4.5.1.3.1.3INTEGER {other(1), down(2), up(3), degraded(4), testing(5)}read-onlycurrent
xfCarrierTermRadioFrameId
OBJECT-TYPE
It represents the selected Radio Frame ID.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.4Integer32read-writecurrent
xfCarrierTermPreamble
OBJECT-TYPE
It allows to set different preambles in the radio frame of each Carrier Termination in a XPIC or MIMO configuration: - preambleA(2) - preambleB(3) - preambleC(4) - preambleD(5) For non XPIC nor MIMO configurations, it can be left to notSpecified(1).
1.3.6.1.4.1.193.81.3.4.5.1.3.1.5INTEGER {notSpecified(1), preambleA(2), preambleB(3), preambleC(4), preambleD(5)}read-writecurrent
xfCarrierTermSelectedMinACM
OBJECT-TYPE
It represents the selected minimum Tx ACM (Adaptive Code Modulation).
1.3.6.1.4.1.193.81.3.4.5.1.3.1.6CarrierTermACMIndexread-writecurrent
xfCarrierTermActualACM
OBJECT-TYPE
It represents the actual (current) Tx ACM (Adaptive Code Modulation).
1.3.6.1.4.1.193.81.3.4.5.1.3.1.7CarrierTermACMIndexread-onlycurrent
xfCarrierTermSelectedMaxACM
OBJECT-TYPE
It represents the selected maximum Tx ACM (Adaptive Code Modulation).
1.3.6.1.4.1.193.81.3.4.5.1.3.1.8CarrierTermACMIndexread-writecurrent
xfCarrierTermCapabilitiesLastChange
OBJECT-TYPE
The value of sysUpTime at the time of the last creation or deletion of an entry in the xfCarrierTerminationCapabilityTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.9TimeTicksread-onlycurrent
xfCarrierTermReferenceSEC
OBJECT-TYPE
Reference Spectrum Efficiency Class (SEC): - notSpecified(1): not configured, not possible to set - sec2(2): spectrum eff. Class 2 - sec4L(3): spectrum eff. Class 4L - sec4H(4): specturm eff. Class 4H - sec5LB(5): spectrum eff. Class 5LB - sec5HB(6): spectrum eff. Class 5HB - sec6LB(7): spectrum eff. Class 6LB - sec6HB(8): spectrum eff. Class 6HB - sec7B(9): spectrum eff. Class 7B In ETSI, a value different from notSpecified(1) must be configured. In ANSI, no value can be set and notSpecified(1) is always returned. Near end access: read-write. Far end access: read-write.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.10INTEGER {notSpecified(1), sec2(2), sec4L(3), sec4H(4), sec5LB(5), sec5HB(6), sec6LB(7), sec6HB(8), sec7B(9)}read-writecurrent
xfCarrierTermWantedLicensedCapacity
OBJECT-TYPE
It represents the wanted traffic licensed capacity on the Carrier Termination, expressed in Kbps. The default value 0 (i.e. disabled) means that no wanted licensed capacity has been selected by the user. The value used by RL license logic to request capacity licenses for the Carrier Termination is: - the capacity of selected max profile, if xfCarrierTermWantedLicensedCapacity = 0 - the value of xfCarrierTermWantedLicensedCapacity itself, if it is different from 0
1.3.6.1.4.1.193.81.3.4.5.1.3.1.11Integer32 (0..2147483647)read-writecurrent
xfCarrierTermActualLicensedCapacity
OBJECT-TYPE
This MO represents the Actual Licensed Capacity used on the Carrier Termination: - if Wanted Licensed Capacity is disabled (i.e. xfCarrierTermWantedLicensedCapacity = 0), the Selected Max ACM (xfCarrierTermSelectedMaxACM MO) is used for requesting the license capacity on the carrier; - if Wanted Licensed Capacity is enabled (i.e. xfCarrierTermWantedLicensedCapacity > 0), the value of Wanted Licensed Capacity itself is used for requesting the license capacity on the carrier.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.12Integer32 (0..2147483647)read-onlycurrent
xfCarrierTermActualCapacity
OBJECT-TYPE
It represents the actual transmitted capacity supported by Carrier Termination in Kbps.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.13Integer32 (0..2147483647)read-onlycurrent
xfCarrierTermPolarization
OBJECT-TYPE
XPIC polarization, either horizontal or vertical.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.14INTEGER {notSpecified(1), horizontal(2), vertical(3)}read-writecurrent
xfCarrierTermXPICOperStatus
OBJECT-TYPE
XPIC locking status: - Other(1): don't use - Locked(2): XPIC is locked: XPI valid - Unlocked(3): XPIC is not locked: XPI not valid - Mute(4): XPIC is muted (XPIC recovery started) - NotApplicable(5): XPIC is disabled
1.3.6.1.4.1.193.81.3.4.5.1.3.1.15INTEGER {other(1), locked(2), unlocked(3), mute(4), notApplicable(5)}read-onlycurrent
xfCarrierTermMIMOOperStatus
OBJECT-TYPE
MIMO locking status: - Other(1): don't use - Locked(2): MIMO is locked: XPI and SNIR valid - Unlocked(3): MIMO is not locked: XPI and SNIR not valid - Mute(4): MIMO is muted - NotApplicable(5): MIMO is disabled
1.3.6.1.4.1.193.81.3.4.5.1.3.1.16INTEGER {other(1), locked(2), unlocked(3), mute(4), notApplicable(5)}read-onlycurrent
xfCarrierTermSNIR
OBJECT-TYPE
Signal to Noise Interference Ratio (SNIR) in dB.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.17Integer32read-onlycurrent
xfCarrierTermXPI
OBJECT-TYPE
Cross-Polar Interference (XPI) level of the receiver in tenth of dB.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.18Integer32read-onlycurrent
xfCarrierTermReset
OBJECT-TYPE
Reset command forces all the Carrier Termination settings to their own default.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.19INTEGER {other(1), noReset(2), reset(3)}read-writecurrent
xfCarrierTermRestore
OBJECT-TYPE
Restore command clears RFloop, IFloop and turns RAU transmitter on.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.20INTEGER {other(1), noRestore(2), restore(3)}read-writecurrent
xfCarrierTermAutoRemoveLoopEnable
OBJECT-TYPE
Auto remove all RL loops after 15 minutes.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.21INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
xfCarrierTermBerAlarmThreshold
OBJECT-TYPE
Threshold for BER alarm. Default: ber1e3(2).
1.3.6.1.4.1.193.81.3.4.5.1.3.1.22INTEGER {other(1), ber1e3(2), ber1e4(3), ber1e5(4), ber1e6(5)}read-writecurrent
xfCarrierTermActualRxACM
OBJECT-TYPE
It represents the actual (current) Rx ACM (Adaptive Code Modulation).
1.3.6.1.4.1.193.81.3.4.5.1.3.1.23CarrierTermACMIndexread-onlycurrent
xfCarrierTermFeCTSeverity
OBJECT-TYPE
This object represents the highest severity of Far-End CT alarms and is populated only if Far-End terminal is represented by a Packet terminal (PT). Craft uses this MO to colour the box representing the Far-End CT in the hop view. In case of the Far-End is a TN, the remote highest alarm severity of CT is referred to the interfaces: RAU IF and RF IF.
1.3.6.1.4.1.193.81.3.4.5.1.3.1.24Bits {feCtSeverity0(0), feCtSeverity1(1), feCtSeverity2(2)}read-onlycurrent
xfCarrierTerminationCapabilityTable
OBJECT-TYPE
This table is used to configure the Carrier Termination (CT).
1.3.6.1.4.1.193.81.3.4.5.1.4not-accessiblecurrent
xfCarrierTerminationCapabilityEntry
OBJECT-TYPE
An entry in the xfCarrierTerminationCapabilityTable.
1.3.6.1.4.1.193.81.3.4.5.1.4.1not-accessiblecurrent
xfRadioFrameId
OBJECT-TYPE
It represents the Radio Frame Id.
1.3.6.1.4.1.193.81.3.4.5.1.4.1.1Integer32 (1..2147483647)read-onlycurrent
xfChannelSpacing
OBJECT-TYPE
Channel spacing: - ETSI: 3.5, 7, 14, 28, 40, 56, 112 MHz - ANSI: 10, 20, 30, 40, 50, 60, 80 MHz
1.3.6.1.4.1.193.81.3.4.5.1.4.1.2INTEGER {chspOther(1), chsp3500kHz(2), chsp7MHz(3), chsp10MHz(4), chsp14MHz(5), chsp20MHz(6), chsp28MHz(7), chsp30MHz(8), chsp40MHz(9), chsp50MHz(10), chsp56MHz(11), chsp60MHz(12), chsp80MHz(13), chsp112MHz(14)}read-onlycurrent
xfFrameFormatType
OBJECT-TYPE
It represents the Frame Format type: - Standard - XPIC - MIMO - Long Haul Standard - Long Haul XPIC - XPIC on two boards - Long Haul XPIC on two boards
1.3.6.1.4.1.193.81.3.4.5.1.4.1.3INTEGER {other(1), standard(2), xpic(3), mimo(4), longHaulStandard(5), longHaulXpic(6), xpic2boards(7), longHaulXpic2boards(8), mimo2boards(9), sisoCA(10), xpicCA(11)}read-onlycurrent
xfMinACMCapacity
OBJECT-TYPE
It represents the minimum capacity designed for the specific frame format (Radio Frame Id).
1.3.6.1.4.1.193.81.3.4.5.1.4.1.4Integer32 (1..2147483647)read-onlycurrent
xfMaxACMCapacity
OBJECT-TYPE
It represents the maximum capacity designed for the frame format (Radio Frame Id).
1.3.6.1.4.1.193.81.3.4.5.1.4.1.5Integer32 (1..2147483647)read-onlycurrent
xfACMProfile
OBJECT-TYPE
It specifies which adaptive code and modulation profiles are supported.
1.3.6.1.4.1.193.81.3.4.5.1.4.1.6Bits {none(0), qam4Strong(1), qam4Std(2), qam4Light(3), qam16Strong(4), qam16Std(5), qam16Light(6), qam32Strong(7), qam32Std(8), qam32Light(9), qam64Strong(10), qam64Std(11), qam64Light(12), qam128Strong(13), qam128Std(14), qam128Light(15), qam256Strong(16), qam256Std(17), qam256Light(18), qam512Strong(19), qam512Std(20), qam512Light(21), qam1024Strong(22), qam1024Std(23), qam1024Light(24), qam2048Strong(25), qam2048Std(26), qam2048Light(27), qam4096Strong(28), qam4096Std(29), qam4096Light(30), qam8192Strong(31), qam8192Std(32), qam8192Light(33), qam16384Strong(34), qam16384Std(35), qam16384Light(36)}read-onlycurrent
xfACMProfileCapacityTable
OBJECT-TYPE
This tables reports the ACM capacities of the selected Radio Frame Id per each Carrier Termination.
1.3.6.1.4.1.193.81.3.4.5.1.5not-accessiblecurrent
xfACMProfileCapacityEntry
OBJECT-TYPE
An entry in the xfACMProfileCapacityTable.
1.3.6.1.4.1.193.81.3.4.5.1.5.1not-accessiblecurrent
xfACMIndex
OBJECT-TYPE
It represents the positional index of the bitmap xfACMProfile in xfCarrierTerminationCapabilityTable.
1.3.6.1.4.1.193.81.3.4.5.1.5.1.1CarrierTermACMIndexread-onlycurrent
xfACMCapacity
OBJECT-TYPE
It represents the capacity in Kbps of the ACM profile identified by the positional index xfACMIndex of the xfACMProfile in xfCarrierTerminationCapabilityTable. Value 0 means that the ACM profile is not included in current Frame Format.
1.3.6.1.4.1.193.81.3.4.5.1.5.1.2Integer32 (0..2147483647)read-onlycurrent
xfRLTTable
OBJECT-TYPE
This table is used to configure the Radio Link Terminal (RLT).
1.3.6.1.4.1.193.81.3.4.5.1.6not-accessiblecurrent
xfRLTEntry
OBJECT-TYPE
An entry in the xfRLTTable.
1.3.6.1.4.1.193.81.3.4.5.1.6.1not-accessiblecurrent
rltEntLogicalIndex
OBJECT-TYPE
It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by rltEntLogicalIndex is the same entity as identified by the same value of entLogicalIndex.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.1Integer32 (1..2147483647)read-onlycurrent
xfRLTDistinguishedName
OBJECT-TYPE
It represents the distinguished name of the Radio Link Terminal (RLT): Rack/Slot/RLT number. It is the ifName of RL-WAN i/f.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.2DisplayString (SIZE(0..31))read-onlycurrent
xfRLTIpAddress
OBJECT-TYPE
IPv4 address of the network element the Radio Link Terminal (RLT) belongs to.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.3IpAddressread-onlycurrent
xfRLTIPv6Address
OBJECT-TYPE
IPv6 Address of the network element the Radio Link Terminal (RLT) belongs to.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.4InetAddressIPv6read-onlycurrent
xfRLTNeName
OBJECT-TYPE
The name of the network element the Radio Link Terminal (RLT) belongs to (System Name - sysName).
1.3.6.1.4.1.193.81.3.4.5.1.6.1.5DisplayString (SIZE(0..255))read-onlycurrent
xfRLTNeType
OBJECT-TYPE
The type of the network element the Radio Link Terminal (RLT) belongs to (System Descr - sysDescr).
1.3.6.1.4.1.193.81.3.4.5.1.6.1.6DisplayString (SIZE(0..255))read-onlycurrent
xfRLTId
OBJECT-TYPE
Radio Link Terminal (RLT) identifier used for integrity check with far-end.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.7DisplayString (SIZE(0..31))read-writecurrent
xfRLTExpectedFarEndId
OBJECT-TYPE
Expected Id of far-end Radio Link Terminal (RLT), used for integrity check with near-end.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.8DisplayString (SIZE(0..31))read-writecurrent
xfRLTFarEndIdCheck
OBJECT-TYPE
When enabled, the system verifies that far-end Radio Link Terminal name is equal to the expected. If ok Radio Link Terminal status is UP. If not ok the Radio Link Terminal status is stated as DOWN. Default value: disabled.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.9INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfRLTStatus
OBJECT-TYPE
It represents the operational status of the Radio Link Terminal (RLT).
1.3.6.1.4.1.193.81.3.4.5.1.6.1.10INTEGER {other(1), down(2), up(3), degraded(4), resourceUnavailable(5)}read-onlycurrent
xfRLTMode
OBJECT-TYPE
The mode of the Radio Link Terminal (RLT). Values: - 1+0: onePlusZero (default) - 1+1 RLP: onePlusOneRadioLinkProtection - 2+0 RLB: twoPlusZeroAdvancedRadioLinkBonding - 1+1 RLP EQP: onePlusOneRadioLinkProtectionAndEquipmentProtection - 2+0 RLB EQP: twoPlusZeroRadioLinkBondingAndEquipmentProtection - 2+2 RLP EQP: twoPlusTwoRadioLinkProtectionAndEquipmentProtection - 4+0 RLB EQP: fourPlusZeroRadioLinkBondingAndEquipmentProtection
1.3.6.1.4.1.193.81.3.4.5.1.6.1.11INTEGER {other(1), onePlusZero(2), onePlusOneRadioLinkProtection(3), twoPlusZeroAdvancedRadioLinkBonding(4), onePlusOneRadioLinkProtectionAndEquipmentProtection(5), twoPlusZeroRadioLinkBondingAndEquipmentProtection(6), twoPlusTwoRadioLinkProtectionAndEquipmentProtection(7), fourPlusZeroRadioLinkBondingAndEquipmentProtection(8)}read-writecurrent
xfRLTActualTXTotalCapacity
OBJECT-TYPE
It represents the total transmitted capacity throughput (considering both Packet and TDM traffic), expressed in bps, of the Radio Link Terminal (RLT).
1.3.6.1.4.1.193.81.3.4.5.1.6.1.12Gauge32read-onlycurrent
xfRLTActualTXPacketCapacity
OBJECT-TYPE
It represents the transmitted packet capacity throughput (only packet traffic), expressed in bps, of the Radio Link Terminal (RLT).
1.3.6.1.4.1.193.81.3.4.5.1.6.1.13Gauge32read-onlycurrent
xfRLTLimitedTotalCapacity
OBJECT-TYPE
It represents the total transmitted capacity throughput (considering both Packet and TDM traffic), expressed in bps, of the Radio Link Terminal (RLT) limited by License.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.14Gauge32read-onlycurrent
xfRLTRltSeverity
OBJECT-TYPE
This object represents the highest severity alarm related to RLT with logical index 'rltEntLogicalIndex'. Node GUI uses the Far-End entry value (of this MIB MO) to define the colour of the Far-End RLT box in the hop view.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.15Bits {rltSeverity0(0), rltSeverity1(1), rltSeverity2(2)}read-onlycurrent
xfRLTCapability
OBJECT-TYPE
Each bit of this object represents an RLT capability: Bit 0 - XPIC capability Bit 1 - TDM capability Bit 2 - CsPlurality capability Bit 3 - CtAutoSelection capability Bit 4 - OnePlusZero capability Bit 5 - OnePlusOneRadioLinkProtection capability Bit 6 - TwoPlusZeroAdvancedRadioLinkBonding capability Bit 7 - OnePlusOneRadioLinkProtectionWithEQP capability Bit 8 - TwoPlusZeroRadioLinkBondingWithEQP capability Bit 9 - TwoPlusTwoRadioLinkProtectionWithEQP capability Bit 10 - FourPlusZeroRadioLinkBondingWithEQP capability Bit 11 - XPIC between boards capability Bit 12 - XPIC Members Auto Selection capability Bit 13 - Manual EQP Switch capability Bit 14 - Enhanced ACM Protection: Maximum Capacity capability Bit 15 - Enhanced ACM Protection: Maximum Protection capability Bit 16 - Radio Link Encryption capability Bit 17 - MIMO capability Bit 18 - TX swicthover and SSD capability
1.3.6.1.4.1.193.81.3.4.5.1.6.1.16Bits {xpicCapability0(0), capTDMWithEQP(1), capCsPlurality(2), capCtAutoSelection(3), capOnePlusZero(4), capOnePlusOneRadioLinkProtection(5), capTwoPlusZeroAdvancedRadioLinkBonding(6), capOnePlusOneRadioLinkProtectionWithEQP(7), capTwoPlusZeroRadioLinkBondingWithEQP(8), capTwoPlusTwoRadioLinkProtectionWithEQP(9), capFourPlusZeroRadioLinkBondingWithEQP(10), capXpicBetweenBoards(11), capXpicMembersAutoSelection(12), capManualEqpSwitch(13), capEnhAcmMaxCapacity(14), capEnhAcmMaxProtection(15), capRLEncryption(16), capMIMO(17), capTXswoAndSSD(18)}read-onlycurrent
xfRLTInventoryLastChange
OBJECT-TYPE
The value of sysUpTime at the time of the last creation or deletion of an entry in the xfRLTHierarchyModuleTable. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.17TimeTicksread-onlycurrent
xfRLTCpriMode
OBJECT-TYPE
Set the mode of the CPRI front-haul product. Default: notApplicable.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.18INTEGERread-onlycurrent
xfRLTReset
OBJECT-TYPE
It resets RLT to default configuration.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.19INTEGER {other(1), rltNoReset(2), rltReset(3)}read-writecurrent
xfRLTMeasuredHopLength
OBJECT-TYPE
It represents the measured value of the radio hop length expressed in Km. Values: - Radio hop length measurement not yet available: -1; - Measured hop length in Km: > 0.
1.3.6.1.4.1.193.81.3.4.5.1.6.1.20INTEGERread-onlycurrent
xfTrafficTable
OBJECT-TYPE
This table is used to map the TDM interface to the specified RLT.
1.3.6.1.4.1.193.81.3.4.5.1.7not-accessiblecurrent
xfTrafficEntry
OBJECT-TYPE
An entry in the xfTrafficEntry.
1.3.6.1.4.1.193.81.3.4.5.1.7.1not-accessiblecurrent
trEntLogicalIndex
OBJECT-TYPE
It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by trEntLogicalIndex is the same interface as identified by the same value of entLogicalIndex.
1.3.6.1.4.1.193.81.3.4.5.1.7.1.1Integer32 (1..2147483647)read-onlycurrent
xfTDMEnable
OBJECT-TYPE
It allows to map TDM interface to a specific Radio Link Terminal (RLT). Default: disable.
1.3.6.1.4.1.193.81.3.4.5.1.7.1.2INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfRLTDMIfTable
OBJECT-TYPE
This table is an extention of the ifTable used to configure TDM interface.
1.3.6.1.4.1.193.81.3.4.5.1.8not-accessiblecurrent
xfRLTDMIfEntry
OBJECT-TYPE
An entry in the xfRLTDMIfEntry.
1.3.6.1.4.1.193.81.3.4.5.1.8.1not-accessiblecurrent
xfRLTDMIfIndex
OBJECT-TYPE
It is the ifIndex of RL TDM I/F table.
1.3.6.1.4.1.193.81.3.4.5.1.8.1.1Integer32 (1..2147483647)read-onlycurrent
xfActualTDMCapacity
OBJECT-TYPE
It represents the current tributary capacity.
1.3.6.1.4.1.193.81.3.4.5.1.8.1.2Integer32 (0..2147483647)read-onlycurrent
xfWantedTDMAllocation
OBJECT-TYPE
It represents the wanted tributary allocation.
1.3.6.1.4.1.193.81.3.4.5.1.8.1.3Bits {firstE1(0)}read-writecurrent
xfActualTDMAllocation
OBJECT-TYPE
It represents the actual tributary allocation.
1.3.6.1.4.1.193.81.3.4.5.1.8.1.4Bits {firstE1(0)}read-onlycurrent
xfTDMIfAlarms
OBJECT-TYPE
This object shows TDM if related alarms.
1.3.6.1.4.1.193.81.3.4.5.1.8.1.5Bits {ber0(0), ber1(1), ber2(2)}read-onlycurrent
xfTDMRxLoop
OBJECT-TYPE
It configures TDM RX loop: - other(1) - enable(2) - disable(3) (default)
1.3.6.1.4.1.193.81.3.4.5.1.8.1.6INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfTDMDistinguishedName
OBJECT-TYPE
It is the disinguished name of TDM i/f, i.e. R/S/P.
1.3.6.1.4.1.193.81.3.4.5.1.8.1.7DisplayString (SIZE(0..31))read-onlycurrent
xfTDMMaxTributaries
OBJECT-TYPE
It represents the maximum number of tributaries that can be allocated to TDM i/f, depending on frame ID, minimum ACM profile configured and licensed capacity in each CTs of the RLT. The maximum number is limited to 80.
1.3.6.1.4.1.193.81.3.4.5.1.8.1.8INTEGERread-onlycurrent
xfTDMHopLength
OBJECT-TYPE
It represents the length of the radio hop expressed in Km. This is used to calculate the propagation delay over the radio hop that shall be compensated to guarantee TDM traffic error free. Values: - default value for delay compensation: -1 - admissible range of values in Km: 0-200
1.3.6.1.4.1.193.81.3.4.5.1.8.1.9INTEGERread-writecurrent
xfCGIfTable
OBJECT-TYPE
This table is an extension of ifTable reporting the main characteristics of CG i/f.
1.3.6.1.4.1.193.81.3.4.5.1.9not-accessiblecurrent
xfCGIfEntry
OBJECT-TYPE
An entry in the xfCGIfEntry.
1.3.6.1.4.1.193.81.3.4.5.1.9.1not-accessiblecurrent
xfCGIfIndex
OBJECT-TYPE
It is the ifIndex of CG interface.
1.3.6.1.4.1.193.81.3.4.5.1.9.1.1Integer32 (1..2147483647)read-onlycurrent
xfCGIfMinSpeed
OBJECT-TYPE
The minimum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities. Note: in case of bonding configurations, it represents the minimum of the min speeds of all Carrier Terminations in the bonding group.
1.3.6.1.4.1.193.81.3.4.5.1.9.1.2Integer32 (1..2147483647)read-onlycurrent
xfCGIfMaxSpeed
OBJECT-TYPE
The maximum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities. Note: in case of bonding configurations, it represents the sum of the max speeds of all Carrier Terminations in the bonding group.
1.3.6.1.4.1.193.81.3.4.5.1.9.1.3Gauge32read-onlycurrent
xfCGIfRCNum
OBJECT-TYPE
Number of Carrier Termination members belonging to the CG group.
1.3.6.1.4.1.193.81.3.4.5.1.9.1.4INTEGER (1..16)read-onlycurrent
xfCGIfAlarms
OBJECT-TYPE
This object shows CG i/f related alarms.
1.3.6.1.4.1.193.81.3.4.5.1.9.1.5Bits {hccNe0(0), hccNe1(1), hccNe2(2), rltId0(3), rltId1(4), rltId2(5), txSwitchover0(6), txSwitchover1(7), txSwitchover2(8), remoteTxSwitchOver0(9), remoteTxSwitchOver1(10), remoteTxSwitchOver2(11), unableToProtect0(12), unableToProtect1(13), unableToProtect2(14), rfInputThresholdProtection0(15), rfInputThresholdProtection1(16), rfInputThresholdProtection2(17), unableToProtectEqp0(18), unableToProtectEqp1(19), unableToProtectEqp2(20)}read-onlycurrent
xfCGIfHopViewStatus
OBJECT-TYPE
This object represents the Hop View status. Up: Far-End is reachable Down: Far-End not reachable The status is related to HCC-NE alarm.
1.3.6.1.4.1.193.81.3.4.5.1.9.1.6INTEGER {other(1), down(2), up(3)}read-onlycurrent
xfXPICPairTable
OBJECT-TYPE
This table is used to enable XPIC (Admid Status) and set the CT pair in XPIC.
1.3.6.1.4.1.193.81.3.4.5.1.10not-accessiblecurrent
xfXPICPairEntry
OBJECT-TYPE
An entry in the xfXPICPairTable.
1.3.6.1.4.1.193.81.3.4.5.1.10.1not-accessiblecurrent
xpicPairEntLogicalIIndex
OBJECT-TYPE
It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by xpicPairEntLogicalIIndex is the same entity as identified by the same value of entLogicalIndex.
1.3.6.1.4.1.193.81.3.4.5.1.10.1.1Integer32 (1..2147483647)read-onlycurrent
xfXPICPairAdminStatus
OBJECT-TYPE
Administrative status of XPIC pair. Default value: disable.
1.3.6.1.4.1.193.81.3.4.5.1.10.1.2INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfXPICPairNumber
OBJECT-TYPE
It specifies the number used for identification of the XPIC pair.
1.3.6.1.4.1.193.81.3.4.5.1.10.1.3INTEGERread-writecurrent
xfXPICPairRecovery
OBJECT-TYPE
It allows to enable/disable the recovery procedure when XPIC mode is enabled.
1.3.6.1.4.1.193.81.3.4.5.1.10.1.4INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfXPICPairRestore
OBJECT-TYPE
Restore XPIC functionality after XPIC recovery has been triggered and resets XPIC Auto Restore procedure
1.3.6.1.4.1.193.81.3.4.5.1.10.1.5INTEGER {other(1), xpicNoRestore(2), xpicRestore(3)}read-writecurrent
xfXPICCTmember1
OBJECT-TYPE
It specifies the first Carrier Termination (CT) member of the XPIC pair. The member is identified by the CT distinguished name (R/S/P).
1.3.6.1.4.1.193.81.3.4.5.1.10.1.6DisplayString (SIZE(0..31))read-writecurrent
xfXPICCTmember2
OBJECT-TYPE
It specifies the second Carrier Termination (CT) member of the XPIC pair. The member is identified by the CT distinguished name (R/S/P).
1.3.6.1.4.1.193.81.3.4.5.1.10.1.7DisplayString (SIZE(0..31))read-writecurrent
xfXPICAutoRestore
OBJECT-TYPE
It enable/disables the XPIC Auto Recovery procedure.
1.3.6.1.4.1.193.81.3.4.5.1.10.1.8INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfXpicPairIndex
OBJECT-TYPE
It represents the table second index and is used to index the XPIC pair associated to Radio Link Terminal (RLT) with entLogicalIndex equal to xpicPairEntLogicalIIndex. It has been introduce to support configurations like 4+0 RLB EQP, 2+2 RLP EQP.
1.3.6.1.4.1.193.81.3.4.5.1.10.1.9INTEGER (1..10)read-onlycurrent
xfMIMOGroupTable
OBJECT-TYPE
This table is used to enable MIMO (Admid Status) and set the CTs in MIMO group.
1.3.6.1.4.1.193.81.3.4.5.1.11not-accessiblecurrent
xfMIMOGroupEntry
OBJECT-TYPE
An entry in the xfMIMOGroupTable.
1.3.6.1.4.1.193.81.3.4.5.1.11.1not-accessiblecurrent
mimoGroupEntLogicalIIndex
OBJECT-TYPE
It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by mimoGroupEntLogicalIIndex is the same entity as identified by the same value of entLogicalIndex.
1.3.6.1.4.1.193.81.3.4.5.1.11.1.1Integer32 (1..2147483647)read-onlycurrent
xfMIMOGroupAdminStatus
OBJECT-TYPE
Administrative status of MIMO group. Default value: disable.
1.3.6.1.4.1.193.81.3.4.5.1.11.1.2INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfMIMOGroupNumber
OBJECT-TYPE
It specifies the Number used for identification of the MIMO group.
1.3.6.1.4.1.193.81.3.4.5.1.11.1.3INTEGERread-writecurrent
xfMIMOGroupRecovery
OBJECT-TYPE
It allows to enable/disable the recovery procedure when MIMO mode is enabled.
1.3.6.1.4.1.193.81.3.4.5.1.11.1.4INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfMIMOGroupRestore
OBJECT-TYPE
Restore MIMO functionality after MIMO recovery has been triggered.
1.3.6.1.4.1.193.81.3.4.5.1.11.1.5INTEGER {other(1), mimoNoRestore(2), mimoRestore(3)}read-writecurrent
xfMIMOCTmember1
OBJECT-TYPE
It specifies the first Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P).
1.3.6.1.4.1.193.81.3.4.5.1.11.1.6DisplayString (SIZE(0..31))read-onlycurrent
xfMIMOCTmember2
OBJECT-TYPE
It specifies the second Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P).
1.3.6.1.4.1.193.81.3.4.5.1.11.1.7DisplayString (SIZE(0..31))read-onlycurrent
xfMIMOCTmember3
OBJECT-TYPE
It specifies the third Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P).
1.3.6.1.4.1.193.81.3.4.5.1.11.1.8DisplayString (SIZE(0..31))read-onlycurrent
xfMIMOCTmember4
OBJECT-TYPE
It specifies the forth Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P).
1.3.6.1.4.1.193.81.3.4.5.1.11.1.9DisplayString (SIZE(0..31))read-onlycurrent
xfRLWANIfTable
OBJECT-TYPE
This table is used to handle the RL-WAN i/f.
1.3.6.1.4.1.193.81.3.4.5.1.12not-accessiblecurrent
xfRLWANIfEntry
OBJECT-TYPE
An entry in the xfRLWANIfTable.
1.3.6.1.4.1.193.81.3.4.5.1.12.1not-accessiblecurrent
xfRLWANIfIndex
OBJECT-TYPE
It is the table index. It contains the ifIndex value of the WAN interface.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.1Integer32 (1..2147483647)read-onlycurrent
xfRLWANDistinguishedName
OBJECT-TYPE
It is the name uniquely identifying the RL-WAN interface within the system, i.e. R/S/P.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.2DisplayString (SIZE(0..31))read-onlycurrent
xfRLWANCompAdminStatus
OBJECT-TYPE
It enables and disables MLHC and PLC on the RL-WAN interface. down(2): both MLHC and PLC are disabled. mlhcUp(3): only MLHC is enabled. mlhcPlcUp(4): both MLHC and PLC are enabled. Default:down(2). Compression can be enabled on only one of the two RL-WAN interfaces belonging to the same MMU. Any attempt to enable compression on both RL-WAN interfaces belonging to the same MMU is refused.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.3INTEGER {other(1), down(2), mlhcUp(3), mlhcPlcUp(4)}read-writecurrent
xfRLWANCompConnStatus
OBJECT-TYPE
It specifies if the compression building block is physically connected to the RL-WAN interface. Physical connection of the compression building block to the RL-WAN interface is pre-requisite for enabling compression. When xfRLWANCompAdminStatus is set either to mlhcUp or mlhcPlcUp, the compression building block is physically connected to RL-WAN interfaces and xfRLWANCompConnStatus becomes connected. When xfRLWANCompAdminStatus is set either to mlhcUp or mlhcPlcUp on the other RL-WAN interface, the compression building block is physically connected to the other RL-WAN interfaces and xfRLWANCompConnStatus becomes disconnected.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.4INTEGER {other(1), disconnected(2), connected(3)}read-onlycurrent
xfRLWANMlhcMplsMode
OBJECT-TYPE
It specifies the wanted mpls mode. mplsOnly(2): Ethernet customer bridge, provider bridge and QinQ headers, including MPLS labels (up to 3) are compressed. controlWord(3): L2 VPN with Pseudo-Wire Control Word headers are compressed. l2(4): L2 VPN without Pseudo-Wire Control Word headers are compressed. l3(5): L3 VPN headers are compressed. Default: mplsOnly(2). This can be configured only if compression administrative status is down.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.5INTEGER {other(1), mplsOnly(2), controlWord(3), l2(4), l3(5)}read-writecurrent
xfRLWANMlhcOperStatus
OBJECT-TYPE
Multi-Layer Header Compression operative status.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.6INTEGER {other(1), down(2), up(3)}read-onlycurrent
xfRLWANPlcOperStatus
OBJECT-TYPE
Payload Compression operative status.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.7INTEGER {other(1), down(2), up(3)}read-onlycurrent
xfRLWANActualCapacity
OBJECT-TYPE
Actual Capacity (speed) of RL WAN interface, in bps.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.8Gauge32read-onlycurrent
xfRLWANLimitedCapacity
OBJECT-TYPE
Capacity (speed) limited by license of RL WAN interface, in bps.
1.3.6.1.4.1.193.81.3.4.5.1.12.1.9Gauge32read-onlycurrent
xfRLTHierarchyModuleTable
OBJECT-TYPE
This table is used to handle Module (MMU - RAU) hierarchy for the specific RLT.
1.3.6.1.4.1.193.81.3.4.5.1.13not-accessiblecurrent
xfRLTHierarchyModuleEntry
OBJECT-TYPE
An entry in the xfRLTHierarchyModuleTable.
1.3.6.1.4.1.193.81.3.4.5.1.13.1not-accessiblecurrent
xfRLTMHIndex
OBJECT-TYPE
It is the table index. It contains the entPhisycalIndex of the WAN port associated to the RLT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.1Integer32 (1..2147483647)read-onlycurrent
xfRLTModuleIndex
OBJECT-TYPE
It is the table index. It is a sequential number referred to the module (entity), either MMU or RAU, constituting the RLT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.2Integer32 (1..1000)read-onlycurrent
xfRLTEntPhysicalIndex
OBJECT-TYPE
This MO represents the value of entPhysicalIndex of the module, either MMU or RAU, constituting the RLT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.3Integer32read-onlycurrent
xfRLTPhysicalCointainedIn
OBJECT-TYPE
This MO represents the value of entPhysicalIndex for the physical entity which 'contains' this physical entity, which is either MMU or RAU (constituting the RLT).
1.3.6.1.4.1.193.81.3.4.5.1.13.1.4Integer32read-onlycurrent
xfRLTPhysicalParentRelPos
OBJECT-TYPE
This MO represents the indication of the relative position of this 'child' component among all its 'sibling' components.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.5Integer32read-onlycurrent
xfRLTEntityPhysicalDescr
OBJECT-TYPE
This MO represents a textual description of physical entity (module), either MMU or RAU, constituting the RLT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.6DisplayStringread-onlycurrent
xfRLTModuleSlotPosition
OBJECT-TYPE
This MO represents the slot position of the physical entity (module), either MMU or RAU, constituting the RLT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.7Integer32read-onlycurrent
xfRLTFEDistinguishedName
OBJECT-TYPE
This MO represents the distinguished name of the Near-End logical entity, either RLT or CT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.8DisplayStringread-onlycurrent
xfRLTNEDistinguishedName
OBJECT-TYPE
This MO represents the distinguished name of the Far-End logical entity, either RLT or CT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.9DisplayStringread-onlycurrent
xfRLTInterfaceIndex
OBJECT-TYPE
This MO represents the value of ifIndex of the interface, either CG IF (Bonding/RLP) or RAU IF, constituting the RLT.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.10Integer32read-onlycurrent
xfRLTHighestSeverityAlarm
OBJECT-TYPE
This MO reports the highest severity of the alarms active in the physical module, MMU or RAU, it refers to. Value list: - critical(0): highest severity is Critical; - major(1): highest severity is Major; - minor(2): highest severity is Minor; - warning(3): highest severity is Warning; - clear(4): no alarm.
1.3.6.1.4.1.193.81.3.4.5.1.13.1.11INTEGER {critical(0), major(1), minor(2), warning(3), clear(4)}read-onlycurrent
xfRLTProtectionTable
OBJECT-TYPE
This table is used to handle RL Protection for the RLT whose mode is set 1+1RLP.
1.3.6.1.4.1.193.81.3.4.5.1.14not-accessiblecurrent
xfRLTProtectionEntry
OBJECT-TYPE
An entry in the xfRLTProtectionTable.
1.3.6.1.4.1.193.81.3.4.5.1.14.1not-accessiblecurrent
xfRLTProtIndex
OBJECT-TYPE
It is the table index. It contains the entity logical index of the RLT configured in 1+1RLP.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.1Integer32 (1..2147483647)read-onlycurrent
xfRLTProtectionSwitchMode
OBJECT-TYPE
The mode in which the switching mechanism is configured. Auto: System automatically switches from the degraded to the other transmitter (Tx). Manual: Automatic switching is disabled and operator can select Tx manually. Auto & Revertive: makes it possible to manually set the preferred Tx. TX switch disable: Selective Space Diverity, SSD. RLP TX switch is disabled. The two received signals, from different paths, are combined. Default: AUTO (for RLT mode RLP) & NA (default for RLT mode RLB).
1.3.6.1.4.1.193.81.3.4.5.1.14.1.2INTEGER {other(1), auto(2), manual(3), autoRevertive(4), txSwitchDisable(5)}read-writecurrent
xfRLTProtectionStatus
OBJECT-TYPE
Status of the protection, when configured in a protected mode. Values: - unprotected; - protected - unableToProtect Note: Applicable only when RLT-mode is RL protection.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.3INTEGER {other(1), unprotected(2), protected(3), unableToProtect(4)}read-onlycurrent
xfRLTRevertivePreferredTX
OBJECT-TYPE
It specifies the preferred TX Radio Carrier Termination (CT) in revertive protection mode. The member is identified by the CT distinguished name (R/S/P).
1.3.6.1.4.1.193.81.3.4.5.1.14.1.4DisplayString (SIZE(0..31))read-writecurrent
xfRLTProtectionWaitToRestoreTime
OBJECT-TYPE
The time, in # of seconds, to wait before switching back to the preferred Tx in Auto & Revertive mode. Default: 0.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.5INTEGERread-writecurrent
xfRLTFadeNotificationTimer
OBJECT-TYPE
Notifications for alarms caused by fading, with a duration less than the specified time (0 - 1000 seconds) are not sent. Only applicable for protected configurations. Default: 200.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.6INTEGERread-writecurrent
xfRLTManualSwitchCommand
OBJECT-TYPE
Used to request a TX switch-over. Applicable for protected configurations and when protectionSwitchMode is set to Manual. Not Applicable for RLT mode RLB Value: - txManualSwitch - txManualNoSwitch.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.7INTEGER {other(1), txManualSwitch(2), txManualNoSwitch(3)}read-writecurrent
xfRLTTxSwitchOverConfiguration
OBJECT-TYPE
Enable or disable the function to switch TX on a request from far-end, including also the TX switchover alarm notifications , both local and remote. Only applicable in RLT mode RLP. Values: - notSupported: (default for RLT in RLB mode) - enable: TX switchover triggered by local and remote faults - disable: TX switchover disabled(default for RLT in RLP mode) - DEPRECATED - enableLocal: TX switchover triggered by local faults only (default for RLT in RLP mode)
1.3.6.1.4.1.193.81.3.4.5.1.14.1.8INTEGER {other(1), notSupported(2), enable(3), disable(4), enableLocal(5)}read-writecurrent
xfRLTTxSwitchOverAlarmReset
OBJECT-TYPE
Used to manual reset the TX switch-over alarm and Remote TX switchover alarm (consequently to TX switch ordered from far-end). Note: the alarm is raised when TX Switch far-end function is enabled (xfRLTTxSwitchOverConfiguration). Value: - txSwitchOverAlarmNoReset - txSwitchOverAlarmReset.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.9INTEGER {other(1), txSwitchOverAlarmNoReset(2), txSwitchOverAlarmReset(3)}read-writecurrent
xfRLTNumOfRLPSwitch
OBJECT-TYPE
It represents the number of RLP Radio TX switch.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.10Integer32 (0..2147483647)read-onlycurrent
xfRLTEnhancedACMProtectionMode
OBJECT-TYPE
It configures the enhanced ACM protection mode. The enhanced ACM protection uses RX indicators from both the working and the protection links to select an ACM profile to optimize capacity (throughput) and/or protection (robustness). Values: - Active Transmitter : ACM engine determines the ACM profile according to the working Rx ACM indications only; - Maximum Capacity (default): Working Rx ACM engine is aware of the ACM profile requests from the protection Rx ACM engine, and determines the highest ACM profile between the working and the protection links; - Maximum Protection : Working Rx ACM engine is aware of the protection Rx ACM engine's ACM profile requests, and determines the lowest ACM profile between the working and the protection links.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.11INTEGER {other(1), activeTransmitter(2), maximumCapacity(3), maximumProtection(4)}read-writecurrent
xfRLTEnhancedACMProtectionOperStatus
OBJECT-TYPE
Status of the enhanched ACM protection engine, when ACM engine is configured either in maximum-troughtput or maximum-protection mode. Values: - notApplicable : when enhanced ACM protection mode is basic; - enhAcmProtActive : when the enhanced ACM engine is working and the highest ACM profile is selected between the working and the protection links; - enhAcmProtNotActive: when the enhanced ACM engine is not working.
1.3.6.1.4.1.193.81.3.4.5.1.14.1.12INTEGER {other(1), notApplicable(2), enhAcmProtActive(3), enhAcmProtNotActive(4)}read-onlycurrent
xfRLTEncryptionTable
OBJECT-TYPE
This table is used to handle Radio Link Encryption.
1.3.6.1.4.1.193.81.3.4.5.1.15not-accessiblecurrent
xfRLTEncryptionEntry
OBJECT-TYPE
An entry in the xfRLTEncryptionTable.
1.3.6.1.4.1.193.81.3.4.5.1.15.1not-accessiblecurrent
xfRLTEncryptionIndex
OBJECT-TYPE
It represents the xfRLTEncryptionTable index and is the RLT entity logical index.
1.3.6.1.4.1.193.81.3.4.5.1.15.1.1Integer32 (1..2147483647)read-onlycurrent
xfRLTEncryptionAdminStatus
OBJECT-TYPE
This MO allows to enable/disable the Encryption of both control and traffic plain over the Radio Link hop. Values: - enable; - disable. Default: DISABLE.
1.3.6.1.4.1.193.81.3.4.5.1.15.1.2INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfRLTEncryptionOperStatus
OBJECT-TYPE
This MO represents the Operative Status of the Encryption function over the Radio Link hop and refers to receiving direction. Therefore, it indicates if the receiving side is able or not able to correctly/successfully decipher the ciphered data stream transmitted from remote side.. The ecryption status can assume the values: - up: control and traffic plain are correctly deciphered; - down: control and traffic plain are not deciphered correctly/successfully, due to e.g. authentication failure, disturbance over the radio-hop.
1.3.6.1.4.1.193.81.3.4.5.1.15.1.3INTEGER {other(1), up(2), down(3)}read-onlycurrent
xfRLTEncryptionMasterKey
OBJECT-TYPE
This MO allows to define the Master Key used to initiate the Encryption operation. Master Key is hidden.
1.3.6.1.4.1.193.81.3.4.5.1.15.1.4DisplayString (SIZE(0..63))read-writecurrent
xfRadioLinkRltPmObjects
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.5.2
xfRLPMContinuousCounterTable
OBJECT-TYPE
Table for RLT performance data.
1.3.6.1.4.1.193.81.3.4.5.2.1not-accessiblecurrent
xfRLPMContinuousCounterEntry
OBJECT-TYPE
An entry in the xfRLPMContinuousCounterTable.
1.3.6.1.4.1.193.81.3.4.5.2.1.1not-accessiblecurrent
xfPMTimeElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.1PerfIntervalCountread-onlycurrent
xfPMCurrentES
OBJECT-TYPE
This object shows the errored seconds. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.2PerfCurrentCountread-onlycurrent
xfPMCurrentSES
OBJECT-TYPE
This object shows the severely errored seconds. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.3PerfCurrentCountread-onlycurrent
xfPMCurrentBBE
OBJECT-TYPE
This object shows the background block errors. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.4HCPerfCurrentCountread-onlycurrent
xfPMCurrentUAS
OBJECT-TYPE
This object shows the unavailable seconds (or unavailable time). Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.5PerfCurrentCountread-onlycurrent
xfPMCurrentBB
OBJECT-TYPE
This object shows the background blocks. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.6HCPerfCurrentCountread-onlycurrent
xfPMPerfReset
OBJECT-TYPE
This object is used to reset the performance counters: - Elapsed Time, ES, SES, BBE, BB - PM ACM - ETSI - EN 301 129 (TLTS, RLTS, ...) current/interval 15m/24h - Max and Min XPI/MSE current/interval 15m/24h It can be also set when the RAU is not present. Near end access: read-write.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.7INTEGER {other(1), noReset(2), reset(3)}read-writecurrent
xfPMCurrentESR
OBJECT-TYPE
The ratio of ES to total seconds in available time during a fixed measurement interval. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.8PerfCurrentCountread-onlycurrent
xfPMCurrentSESR
OBJECT-TYPE
The ratio of SES to total seconds in available time during a fixed measurement interval. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.9PerfCurrentCountread-onlycurrent
xfPMCurrentBBER
OBJECT-TYPE
The ratio of Background Block Errors (BBE) to total blocks in available time during a fixed measurement interval. Reset by xfPMPerfReset.
1.3.6.1.4.1.193.81.3.4.5.2.1.1.10HCPerfCurrentCountread-onlycurrent
xfRLPMACMConfigTable
OBJECT-TYPE
Alarm threshold values for RL PM.
1.3.6.1.4.1.193.81.3.4.5.2.2not-accessiblecurrent
xfRLPMACMConfigEntry
OBJECT-TYPE
Entry in the xfRLPMACMConfigTable
1.3.6.1.4.1.193.81.3.4.5.2.2.1not-accessiblecurrent
xfPMACMSetThreshold15m
OBJECT-TYPE
The 15 minute set threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 180.
1.3.6.1.4.1.193.81.3.4.5.2.2.1.1Integer32read-writecurrent
xfPMACMSetThreshold24h
OBJECT-TYPE
The 24 hour set threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 1500.
1.3.6.1.4.1.193.81.3.4.5.2.2.1.2Integer32read-writecurrent
xfPMACMResetThreshold15m
OBJECT-TYPE
The 15 minute reset threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 20.
1.3.6.1.4.1.193.81.3.4.5.2.2.1.3Integer32read-writecurrent
xfPMACMStatus
OBJECT-TYPE
It reports threshold crossing alarm status: - acm15m: ACM 15 min threshold crossing: ACM has been in the lowest configured profile for a number of seconds exceeding the configured 15 min threshold. - acm24h: ACM 24 hour threshold crossing: ACM has been in the lowest configured profile for a number of seconds exceeding the configured 24 hour threshold.
1.3.6.1.4.1.193.81.3.4.5.2.2.1.4Bits {acm15m0(0), acm15m1(1), acm15m2(2), acm24h0(3), acm24h1(4), acm24h2(5)}read-onlycurrent
xfPMACMValidData
OBJECT-TYPE
It reports which ACM's PM data are valid.
1.3.6.1.4.1.193.81.3.4.5.2.2.1.5Bits {valid15m4QAMStrong(0), valid15m4QAMStd(1), valid15m4QAMLight(2), valid15m16QAMStrong(3), valid15m16QAMStd(4), valid15m16QAMLight(5), valid15m32QAMStrong(6), valid15m32QAMStd(7), valid15m32QAMLight(8), valid15m64QAMStrong(9), valid15m64QAMStd(10), valid15m64QAMLight(11), valid15m128QAMStrong(12), valid15m128QAMStd(13), valid15m128QAMLight(14), valid15m256QAMStrong(15), valid15m256QAMStd(16), valid15m256QAMLight(17), valid15m512QAMStrong(18), valid15m512QAMStd(19), valid15m512QAMLight(20), valid15m1024QAMStrong(21), valid15m1024QAMStd(22), valid15m1024QAMLight(23), valid15m2048QAMStrong(24), valid15m2048QAMStd(25), valid15m2048QAMLight(26), valid15m4096QAMStrong(27), valid15m4096QAMStd(28), valid15m4096QAMLight(29), valid15m8192QAMStrong(30), valid15m8192QAMStd(31), valid15m8192QAMLight(32), valid15m16384QAMStrong(33), valid15m16384QAMStd(34), valid15m16384QAMLight(35)}read-onlycurrent
xfRLPMACMCurrent24hTable
OBJECT-TYPE
ACM-based counters for current 24h table.
1.3.6.1.4.1.193.81.3.4.5.2.3not-accessiblecurrent
xfRLPMACMCurrent24hEntry
OBJECT-TYPE
Entry in the xfRLPMACMCurrent24hTable.
1.3.6.1.4.1.193.81.3.4.5.2.3.1not-accessiblecurrent
xfPMACMCurrent24h4QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.1PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h4QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.2PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h4QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.3PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h16QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.4PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h16QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.5PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h16QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.6PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h32QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.7PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h32QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.8PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h32QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.9PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h64QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.10PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h64QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.11PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h64QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.12PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h128QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.13PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h128QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.14PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h128QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.15PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h256QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.16PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h256QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.17PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h256QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.18PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h512QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.19PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h512QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.20PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h512QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.21PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h1024QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.22PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h1024QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.23PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h1024QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.24PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h2048QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.25PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h2048QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.26PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h2048QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.27PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h4096QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.28PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h4096QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.29PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h4096QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.30PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h8192QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.31PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h8192QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.32PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h8192QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.33PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h16384QAMStrong
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.34PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h16384QAMStd
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.35PerfCurrentCountread-onlycurrent
xfPMACMCurrent24h16384QAMLight
OBJECT-TYPE
Valid time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.3.1.36PerfCurrentCountread-onlycurrent
xfRLPMACMInterval24hTable
OBJECT-TYPE
ACM-based counters for interval 24h table.
1.3.6.1.4.1.193.81.3.4.5.2.4not-accessiblecurrent
xfRLPMACMInterval24hEntry
OBJECT-TYPE
Entry in the xfRLPMACMInterval24hTable.
1.3.6.1.4.1.193.81.3.4.5.2.4.1not-accessiblecurrent
xfPMACMInterval24h4QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.1PerfIntervalCountread-onlycurrent
xfPMACMInterval24h4QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.2PerfIntervalCountread-onlycurrent
xfPMACMInterval24h4QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.3PerfIntervalCountread-onlycurrent
xfPMACMInterval24h16QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.4PerfIntervalCountread-onlycurrent
xfPMACMInterval24h16QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.5PerfIntervalCountread-onlycurrent
xfPMACMInterval24h16QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.6PerfIntervalCountread-onlycurrent
xfPMACMInterval24h32QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.7PerfIntervalCountread-onlycurrent
xfPMACMInterval24h32QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.8PerfIntervalCountread-onlycurrent
xfPMACMInterval24h32QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.9PerfIntervalCountread-onlycurrent
xfPMACMInterval24h64QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.10PerfIntervalCountread-onlycurrent
xfPMACMInterval24h64QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.11PerfIntervalCountread-onlycurrent
xfPMACMInterval24h64QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.12PerfIntervalCountread-onlycurrent
xfPMACMInterval24h128QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.13PerfIntervalCountread-onlycurrent
xfPMACMInterval24h128QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.14PerfIntervalCountread-onlycurrent
xfPMACMInterval24h128QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.15PerfIntervalCountread-onlycurrent
xfPMACMInterval24h256QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.16PerfIntervalCountread-onlycurrent
xfPMACMInterval24h256QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.17PerfIntervalCountread-onlycurrent
xfPMACMInterval24h256QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.18PerfIntervalCountread-onlycurrent
xfPMACMInterval24h512QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.19PerfIntervalCountread-onlycurrent
xfPMACMInterval24h512QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.20PerfIntervalCountread-onlycurrent
xfPMACMInterval24h512QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.21PerfIntervalCountread-onlycurrent
xfPMACMInterval24h1024QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.22PerfIntervalCountread-onlycurrent
xfPMACMInterval24h1024QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.23PerfIntervalCountread-onlycurrent
xfPMACMInterval24h1024QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.24PerfIntervalCountread-onlycurrent
xfPMACMInterval24h2048QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.25PerfIntervalCountread-onlycurrent
xfPMACMInterval24h2048QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.26PerfIntervalCountread-onlycurrent
xfPMACMInterval24h2048QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.27PerfIntervalCountread-onlycurrent
xfPMACMInterval24h4096QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.28PerfIntervalCountread-onlycurrent
xfPMACMInterval24h4096QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.29PerfIntervalCountread-onlycurrent
xfPMACMInterval24h4096QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.30PerfIntervalCountread-onlycurrent
xfPMACMInterval24hValidData
OBJECT-TYPE
This variable indicates whether the data for this interval is valid.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.31TruthValueread-onlycurrent
xfPMACMInterval24h8192QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.32PerfIntervalCountread-onlycurrent
xfPMACMInterval24h8192QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.33PerfIntervalCountread-onlycurrent
xfPMACMInterval24h8192QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.34PerfIntervalCountread-onlycurrent
xfPMACMInterval24h16384QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.35PerfIntervalCountread-onlycurrent
xfPMACMInterval24h16384QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.36PerfIntervalCountread-onlycurrent
xfPMACMInterval24h16384QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.4.1.37PerfIntervalCountread-onlycurrent
xfRLPMACMCurrent15mTable
OBJECT-TYPE
ACM-based counters for current 15m table.
1.3.6.1.4.1.193.81.3.4.5.2.5not-accessiblecurrent
xfRLPMACMCurrent15mEntry
OBJECT-TYPE
Entry in the table.
1.3.6.1.4.1.193.81.3.4.5.2.5.1not-accessiblecurrent
xfPMACMCurrent15m4QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.1PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m4QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.2PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m4QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.3PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m16QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.4PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m16QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.5PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m16QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.6PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m32QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.7PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m32QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.8PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m32QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.9PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m64QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.10PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m64QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.11PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m64QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.12PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m128QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.13PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m128QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.14PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m128QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.15PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m256QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.16PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m256QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.17PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m256QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.18PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m512QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.19PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m512QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.20PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m512QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.21PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m1024QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.22PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m1024QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.23PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m1024QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.24PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m2048QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.25PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m2048QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.26PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m2048QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.27PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m4096QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.28PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m4096QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.29PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m4096QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.30PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m8192QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.31PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m8192QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.32PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m8192QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.33PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m16384QAMStrong
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.34PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m16384QAMStd
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.35PerfCurrentCountread-onlycurrent
xfPMACMCurrent15m16384QAMLight
OBJECT-TYPE
Valid interval time since reset.
1.3.6.1.4.1.193.81.3.4.5.2.5.1.36PerfCurrentCountread-onlycurrent
xfRLPMACMInterval15mTable
OBJECT-TYPE
ACM-based counters for interval 15m table.
1.3.6.1.4.1.193.81.3.4.5.2.6not-accessiblecurrent
xfRLPMACMInterval15mEntry
OBJECT-TYPE
Entry in the table.
1.3.6.1.4.1.193.81.3.4.5.2.6.1not-accessiblecurrent
xfPMACMInterval15mIntervalNumber
OBJECT-TYPE
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.1Integer32 (1..96)read-onlycurrent
xfPMACMInterval15m4QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.2PerfIntervalCountread-onlycurrent
xfPMACMInterval15m4QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.3PerfIntervalCountread-onlycurrent
xfPMACMInterval15m4QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.4PerfIntervalCountread-onlycurrent
xfPMACMInterval15m16QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.5PerfIntervalCountread-onlycurrent
xfPMACMInterval15m16QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.6PerfIntervalCountread-onlycurrent
xfPMACMInterval15m16QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.7PerfIntervalCountread-onlycurrent
xfPMACMInterval15m32QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.8PerfIntervalCountread-onlycurrent
xfPMACMInterval15m32QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.9PerfIntervalCountread-onlycurrent
xfPMACMInterval15m32QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.10PerfIntervalCountread-onlycurrent
xfPMACMInterval15m64QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.11PerfIntervalCountread-onlycurrent
xfPMACMInterval15m64QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.12PerfIntervalCountread-onlycurrent
xfPMACMInterval15m64QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.13PerfIntervalCountread-onlycurrent
xfPMACMInterval15m128QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.14PerfIntervalCountread-onlycurrent
xfPMACMInterval15m128QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.15PerfIntervalCountread-onlycurrent
xfPMACMInterval15m128QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.16PerfIntervalCountread-onlycurrent
xfPMACMInterval15m256QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.17PerfIntervalCountread-onlycurrent
xfPMACMInterval15m256QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.18PerfIntervalCountread-onlycurrent
xfPMACMInterval15m256QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.19PerfIntervalCountread-onlycurrent
xfPMACMInterval15m512QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.20PerfIntervalCountread-onlycurrent
xfPMACMInterval15m512QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.21PerfIntervalCountread-onlycurrent
xfPMACMInterval15m512QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.22PerfIntervalCountread-onlycurrent
xfPMACMInterval15m1024QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.23PerfIntervalCountread-onlycurrent
xfPMACMInterval15m1024QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.24PerfIntervalCountread-onlycurrent
xfPMACMInterval15m1024QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.25PerfIntervalCountread-onlycurrent
xfPMACMInterval15m2048QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.26PerfIntervalCountread-onlycurrent
xfPMACMInterval15m2048QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.27PerfIntervalCountread-onlycurrent
xfPMACMInterval15m2048QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.28PerfIntervalCountread-onlycurrent
xfPMACMInterval15m4096QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.29PerfIntervalCountread-onlycurrent
xfPMACMInterval15m4096QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.30PerfIntervalCountread-onlycurrent
xfPMACMInterval15m4096QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.31PerfIntervalCountread-onlycurrent
xfPMACMInterval15mValidData
OBJECT-TYPE
This variable indicates whether the data for this interval is valid.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.32TruthValueread-onlycurrent
xfPMACMInterval15m8192QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.33PerfIntervalCountread-onlycurrent
xfPMACMInterval15m8192QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.34PerfIntervalCountread-onlycurrent
xfPMACMInterval15m8192QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.35PerfIntervalCountread-onlycurrent
xfPMACMInterval15m16384QAMStrong
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.36PerfIntervalCountread-onlycurrent
xfPMACMInterval15m16384QAMStd
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.37PerfIntervalCountread-onlycurrent
xfPMACMInterval15m16384QAMLight
OBJECT-TYPE
Interval count.
1.3.6.1.4.1.193.81.3.4.5.2.6.1.38PerfIntervalCountread-onlycurrent
xfRLPMMimoCurrentTable
OBJECT-TYPE
Table for RLT MIMO Current performance data.
1.3.6.1.4.1.193.81.3.4.5.2.7not-accessiblecurrent
xfRLPMMimoCurrentEntry
OBJECT-TYPE
An entry in the xfRLPMMimoCurrentTable.
1.3.6.1.4.1.193.81.3.4.5.2.7.1not-accessiblecurrent
xfPMPerfCurrentEta
OBJECT-TYPE
Performance Monitoring for Current MIMO Eta Value.
1.3.6.1.4.1.193.81.3.4.5.2.7.1.1INTEGERread-onlycurrent
xfPMPerfEtaMinLast7days
OBJECT-TYPE
Indicate ETA Min level for the last 7 days.
1.3.6.1.4.1.193.81.3.4.5.2.7.1.2INTEGERread-onlycurrent
xfPMPerfEtaMaxLast7days
OBJECT-TYPE
Indicate ETA Max level for the last 7 days.
1.3.6.1.4.1.193.81.3.4.5.2.7.1.3INTEGERread-onlycurrent
xfRLPMMimoCurrent24hTable
OBJECT-TYPE
Counters for Eta in current 24h.
1.3.6.1.4.1.193.81.3.4.5.2.8not-accessiblecurrent
xfRLPMMimoCurrent24hEntry
OBJECT-TYPE
Entry in the xfRLPMMimoCurrent24hTable.
1.3.6.1.4.1.193.81.3.4.5.2.8.1not-accessiblecurrent
xfPMPerfCurrent24hElapsedTime
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current error-measurement period.
1.3.6.1.4.1.193.81.3.4.5.2.8.1.1Counter32read-onlycurrent
xfPMPerfCurrent24hEtaMin
OBJECT-TYPE
Performance Monitoring for MIMO Eta Min Value in Current 24h.
1.3.6.1.4.1.193.81.3.4.5.2.8.1.2INTEGERread-onlycurrent
xfPMPerfCurrent24hEtaMax
OBJECT-TYPE
Performance Monitoring for Current MIMO 24h Eta Max Value.
1.3.6.1.4.1.193.81.3.4.5.2.8.1.3INTEGERread-onlycurrent
xfRLPMMimoInterval24hTable
OBJECT-TYPE
Performance Monitoring for MIMO Eta Min Value in Interval of 24h.
1.3.6.1.4.1.193.81.3.4.5.2.9not-accessiblecurrent
xfRLPMMimoInterval24hEntry
OBJECT-TYPE
Entry in the xfRLPMMimoInterval24hTable.
1.3.6.1.4.1.193.81.3.4.5.2.9.1not-accessiblecurrent
xfPMPerfInterval24hValidData
OBJECT-TYPE
This variable indicates whether the data for this interval is valid.
1.3.6.1.4.1.193.81.3.4.5.2.9.1.1INTEGERread-onlycurrent
xfPMPerfInterval24hEtaMin
OBJECT-TYPE
Performance Monitoring for MIMO Eta Min Value in Interval of 24h.
1.3.6.1.4.1.193.81.3.4.5.2.9.1.2INTEGERread-onlycurrent
xfPMPerfInterval24hEtaMax
OBJECT-TYPE
Performance Monitoring for MIMO Eta Max Value in Interval of 24h.
1.3.6.1.4.1.193.81.3.4.5.2.9.1.3INTEGERread-onlycurrent
xfRLPMMimoCurrent15mTable
OBJECT-TYPE
Counters for Eta MIMO Current 15m table.
1.3.6.1.4.1.193.81.3.4.5.2.10not-accessiblecurrent
xfRLPMMimoCurrent15mEntry
OBJECT-TYPE
Entry in the table.
1.3.6.1.4.1.193.81.3.4.5.2.10.1not-accessiblecurrent
xfPMPerfCurrent15mElapsedTime
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current error-measurement period
1.3.6.1.4.1.193.81.3.4.5.2.10.1.1Counter32read-onlycurrent
xfPMPerfCurrent15mEtaMin
OBJECT-TYPE
Performance Monitoring for MIMO Eta Min Value in Current 15m.
1.3.6.1.4.1.193.81.3.4.5.2.10.1.2INTEGERread-onlycurrent
xfPMPerfCurrent15mEtaMax
OBJECT-TYPE
Performance Monitoring for MIMO Eta Max Value in Current 15m.
1.3.6.1.4.1.193.81.3.4.5.2.10.1.3INTEGERread-onlycurrent
xfRLPMMimoInterval15mTable
OBJECT-TYPE
Counters for Eta MIMO for Interval 15m.
1.3.6.1.4.1.193.81.3.4.5.2.11not-accessiblecurrent
xfRLPMMimoInterval15mEntry
OBJECT-TYPE
Entry in the table.
1.3.6.1.4.1.193.81.3.4.5.2.11.1not-accessiblecurrent
xfPMPerfInterval15mIntervalNumber
OBJECT-TYPE
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
1.3.6.1.4.1.193.81.3.4.5.2.11.1.1INTEGER (1..96)read-onlycurrent
xfPMPerfInterval15mEtaMin
OBJECT-TYPE
Performance Monitoring for MIMO Eta Min Value in Interval 15m.
1.3.6.1.4.1.193.81.3.4.5.2.11.1.2INTEGERread-onlycurrent
xfPMPerfInterval15mEtaMax
OBJECT-TYPE
Performance Monitoring for MIMO Eta Max Value in Interval 15m.
1.3.6.1.4.1.193.81.3.4.5.2.11.1.3INTEGERread-onlycurrent
xfPMPerfInterval15mValidData
OBJECT-TYPE
This variable indicates whether the data for this interval is valid.
1.3.6.1.4.1.193.81.3.4.5.2.11.1.4INTEGERread-onlycurrent
xfRadioLinkRltConformance
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.5.3
xfRadioLinkRltCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.5.3.1
xfRadioLinkRltGroups
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.5.3.2

Conformance

NameOIDStatus
xfRadioLinkRltFullCompliance
MODULE-COMPLIANCE
The compliance statement for SNMP entities which implement everything.
1.3.6.1.4.1.193.81.3.4.5.3.1.1current
xfRadioLinkRltCompleteGroup
OBJECT-GROUP
A collection of all current objects in this MIB module
1.3.6.1.4.1.193.81.3.4.5.3.2.1current