MIBs Depot

XF-RADIOLINK-PTP-MODEM-MIB

Registered at
1.3.6.1.4.1.193.81.3.4.2
Last updated
2012-05-29 00:00
Organization
Ericsson AB
Revisions
2012-06-24 00:00, 2012-05-29 00:00, 2011-05-23 00:00, 2011-04-06 00:00, 2011-02-01 00:00, 2010-12-13 00:00, 2010-01-19 00:00, 2009-11-30 00:00, 2009-11-26 00:00, 2009-11-18 00:00, 2009-09-18 00:00, 2009-06-26 00:00, 2009-06-24 00:00, 2009-04-20 00:00, 2009-04-14 00:00, 2009-03-04 00:00, 2008-10-02 00:00, 2008-09-16 00:00, 2008-08-15 00:00, 2008-06-25 00:00, 2008-06-24 00:00, 2008-06-18 00:00, 2008-06-04 00:00, 2008-06-03 00:00, 2008-04-09 00:00, 2008-03-03 00:00, 2008-02-26 00:00, 2007-11-12 00:00, 2007-10-24 00:00, 2007-08-14 00:00, 2007-07-03 00:00, 2007-06-04 00:00, 2007-01-17 00:00, 2006-11-14 00:00, 2006-09-19 13:25, 2006-03-20 00:00, 2006-02-24 00:00, 2006-01-31 00:00, 2005-03-02 00:00, 2004-12-13 00:00, 2004-07-02 00:00, 2004-06-16 00:00, 2004-05-25 00:00, 2004-04-26 00:00, 2004-01-20 00:00, 2003-12-17 00:00
Namespace
ericsson
Source file
XF-RADIOLINK-PTP-MODEM-MIB
Digest
sha256:6636d4c26f8e249411bf9ad89e29f8cb20d1cceae87b609fb0d61ec3db010299

Description

This MIB defines objects for point-to-point Radiolink modems ().

Contact

Ericsson AB BU Networks SE-431 84 Molndal Sweden

Imports

FromSymbols
ENTITY-MIBentPhysicalIndex
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION
XF-RADIOLINK-PTP-TERMINAL-MIBxfTermRowIndex
XF-TOP-MIBxfRadioLink

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ENTITY-MIB
HC-PerfHist-TC-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
PerfHist-TC-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB
XF-RADIOLINK-PTP-MODEM-MIB
XF-RADIOLINK-PTP-TERMINAL-MIB
XF-TOP-MIB

Textual conventions

NameOIDSyntaxAccessStatus
MMUAlarmStatus
TEXTUAL-CONVENTION
This TC enumerates the the alarm status. RCC - Communication is lost on the Radio Communication Channel, between the MMU and RAU. RCC alarm for the modem will generate hardware error for the radio (which will lead to radio operational status out of service). ICC - Communication is lost on the Internal Communication Channel, between two MMU2B or between the MMU2 and SMU2, in the same terminal. ATPCCapabilityAlarmFarEnd - The terminal on the far end is configured for ATPC, but at least one of the indoor units does not support ATPC. HCC - Communication is lost on the Hop Communication Channel, between the MMU and the far end MMU. XPICCable - Disconnection of the XPIC cross-cable carrying the baseband signal received in one polarization, e.g. V, to the XPU board of the other polarization, i.e. H if the other is V. XPICLos - The loss of the XPIC baseband cross-signal with cross-cable connected. interMMUChannelFailure - High level fault on inter MMU communication of RS. Only valid in protection. runningConfigNotAccepted - The MMU/RAU/SFP couldn.t accept the running configuration; the service LED is flashing. defaultConfigNotAccepted - Default config not accepted. syncOverRLNotSupported - Current MMU, once provisioned as having sync over RL, does not support sync over RL. rauPowerSupplyChanged - RAU power supply has changed automatically due to undervoltage or bad grounding detection. congestionControlNotSupported - Far-end (i.e. CN) congestion control is not supported by modem; the service LED is flashing. Alarm status is indicated by 24 bits
current
MMUAtpcCapability
TEXTUAL-CONVENTION
This TC enumerates atpc capabilities values codes
current
MMUCapCapability
TEXTUAL-CONVENTION
This TC enumerates capacity capabilities values. Capacity capabilities is indicated by 15 bits
current
MMUChannelSpacingCapability
TEXTUAL-CONVENTION
Channel spacing capability
current
MMUFrameFormatType
TEXTUAL-CONVENTION
Frame format type. Values: fftUnknown(0) fftStatic(1) fftAdmod(2) fftXpic(3) fftXpicAdmod(4) fftLegacy(5) fftStaticLH(6) fftAdmodLH(7) fftXpicLH(8) fftXpicAdmodLH(9)
current
MMUModCapability
TEXTUAL-CONVENTION
This TC enumerates the modulation capabilities. Modulation capabilities is indicated by 5 bits: bits 01234 00000 undetermined 00001 C-QPSK 00010 16-QAM 00011 C-QPSK & 16-QAM 00100 128-QAM 01000 32-QAM 10000 64-QAM ... 11111 C-QPSK & 16-QAM & 128-QAM & 32-QAM & 64-QAM
current
MMUModIndexStatus
TEXTUAL-CONVENTION
This TC enumerates modulation index status values codes
current
ModemModulation
TEXTUAL-CONVENTION
Type of modulation.
current

Objects

NameOIDSyntaxAccessStatus
xfRadioLinkPtpModemObjects
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.2.1
xfModemTable
OBJECT-TYPE
Table for Radiolink point-to-points modem managed objects. The tabled is indexed with entPhysicalIndex.
1.3.6.1.4.1.193.81.3.4.2.1.1not-accessiblecurrent
xfModemEntry
OBJECT-TYPE
An entry in the xfModemTable
1.3.6.1.4.1.193.81.3.4.2.1.1.1not-accessiblecurrent
xfMMUAlarmStatus
OBJECT-TYPE
This object shows the alarm status of the modem.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.1MMUAlarmStatusread-onlycurrent
xfMMUModIndexNotValid
OBJECT-TYPE
This object shows if modulation index is valid. OBSOLETE.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.2MMUModIndexStatusread-onlyobsolete
xfMMUAtpcCapability
OBJECT-TYPE
This object shows the atpc capability.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.3MMUAtpcCapabilityread-onlycurrent
xfMMUModCapability
OBJECT-TYPE
This object shows the modulation capability.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.4MMUModCapabilityread-onlycurrent
xfMMUCapacityCapability
OBJECT-TYPE
This object shows the capacity capability.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.5MMUCapCapabilityread-onlycurrent
xfMMUProtectionPath
OBJECT-TYPE
This object indicates what radio path the modem belongs to.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.6INTEGER {other(1), mmuRa1(2), mmuRa2(3)}read-onlycurrent
xfMMUSlotPosition
OBJECT-TYPE
The AMM slot position in which the MMU2 X is inserted in. 0 = Unknown, 1-20 = slot position.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.7Integer32read-onlycurrent
xfMMUChannelModeCapability
OBJECT-TYPE
Channel capability.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.8Bits {ccdp(0), accp(1), acap(2)}read-onlycurrent
xfMMUChannelCompanionSlot
OBJECT-TYPE
Slot number of companion channel MMU (XPIC/CCDP). Default value: 0 Near end access: read-write Far end access: read-only (Traffic Node only)
1.3.6.1.4.1.193.81.3.4.2.1.1.1.9Integer32read-writecurrent
xfMMUChannelCompanionIndex
OBJECT-TYPE
0 if CCDP not selected entPhysicalIndex of companion channel MMU (XPIC/CCDP) according to xfMMUChannelCompanionSlot setting.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.10Integer32read-onlycurrent
xfMMUInterfaceCapability
OBJECT-TYPE
Interface capability for MMU.
1.3.6.1.4.1.193.81.3.4.2.1.1.1.11Bits {pdhToTdmHier(0), pdhToTdmFlat(1), pdhToTdmFlatAndBitpipeToPtp(2), pdhToTdmAndSDHToSFP(3), pdhToTdmAndSDHToPtp(4), pdhToTdmAndSDHToSFPHAndSDHToPtP(5)}read-onlycurrent
xfMMURAUSupplyVoltage
OBJECT-TYPE
The radio nominal supply voltage. Values: other(1) p55V(2) default m48V(3) p24V(4)
1.3.6.1.4.1.193.81.3.4.2.1.1.1.12INTEGER {other(1), p55V(2), m48V(3), p24V(4)}read-onlycurrent
xfRAUIFTable
OBJECT-TYPE
Table for rau interface objects. The tabled is indexed with ifIndex.
1.3.6.1.4.1.193.81.3.4.2.1.2not-accessiblecurrent
xfRAUIFEntry
OBJECT-TYPE
An entry in the xfRAUIFTable
1.3.6.1.4.1.193.81.3.4.2.1.2.1not-accessiblecurrent
xfRAUIFLoopEnable
OBJECT-TYPE
This object manage the IF loop. Default value: disable(3) Near end access: read-write Far end access: no access
1.3.6.1.4.1.193.81.3.4.2.1.2.1.1INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfRAUIFRxLoop
OBJECT-TYPE
This object manage the Far end rx loop. Default value: disable(3)
1.3.6.1.4.1.193.81.3.4.2.1.2.1.2INTEGER {other(1), enable(2), disable(3)}read-writecurrent
xfRAUIFAlarms
OBJECT-TYPE
This object shows rau if related alarms.
1.3.6.1.4.1.193.81.3.4.2.1.2.1.3Bits {dmodClock0(0), dmodClock1(1), dmodClock2(2), los0(3), los1(4), los2(5), rxIfInput0(6), rxIfInput1(7), rxIfInput2(8), txIfInput0(9), txIfInput1(10), txIfInput2(11), radioFrame0(12), radioFrame1(13), radioFrame2(14), ber0(15), ber1(16), ber2(17), radioId0(18), radioId1(19), radioId2(20), modIndex0(21), modIndex1(22), modIndex2(23), aisReceived0(24), aisReceived1(25), aisReceived2(26), carrierRecoveryLoss0(27), carrierRecoveryLoss1(28), carrierRecoveryLoss2(29), wstLosL2R0(30), wstLosL2R1(31), wstLosL2R2(32), wstLosR2L0(33), wstLosR2L1(34), wstLosR2L2(35), lofR2L0(36), lofR2L1(37), lofR2L2(38), notused0(39), notused1(40), notused2(41), ifLosR2L0(42), ifLosR2L1(43), ifLosR2L2(44), earlyWarning0(45), earlyWarning1(46), earlyWarning2(47), lber0(48), lber1(49), lber2(50), hber0(51), hber1(52), hber2(53)}read-onlycurrent
xfRAUIFStatus
OBJECT-TYPE
This object shows test loop status.
1.3.6.1.4.1.193.81.3.4.2.1.2.1.4Bits {rxLoop0(0), rxLoop1(1), rxLoop2(2), ifLoop0(3), ifLoop1(4), ifLoop2(5)}read-onlycurrent
xfLINERSTable
OBJECT-TYPE
Traffic node extension of ifTable. The tabled is indexed with ifIndex.
1.3.6.1.4.1.193.81.3.4.2.1.3not-accessiblecurrent
xfLINERSEntry
OBJECT-TYPE
An entry in the xfLINERSTable
1.3.6.1.4.1.193.81.3.4.2.1.3.1not-accessiblecurrent
xfLINERSAlarms
OBJECT-TYPE
This object shows line rs related alarms.
1.3.6.1.4.1.193.81.3.4.2.1.3.1.1Bits {timLineSide0(0), timLineSide1(1), timLineSide2(2), lofL2R0(3), lofL2R1(4), lofL2R2(5), losL2R0(6), losL2R1(7), losL2R2(8), sfpLos0(9), sfpLos1(10), sfpLos2(11)}read-onlycurrent
xfModemCapabilityTable
OBJECT-TYPE
Table for misc. modem capability information.
1.3.6.1.4.1.193.81.3.4.2.1.4not-accessiblecurrent
xfModemCapabilityEntry
OBJECT-TYPE
An entry in the xfModemCapabilityTable
1.3.6.1.4.1.193.81.3.4.2.1.4.1not-accessiblecurrent
xfMMUChannelSpacing
OBJECT-TYPE
Channel spacing. ETSI: 3.5, 7, 14, 28, 40, 56 MHz ANSI: 10, 20, 30, 40, 50 MHz
1.3.6.1.4.1.193.81.3.4.2.1.4.1.1MMUChannelSpacingCapabilityread-onlycurrent
xfMMUChannelModulation
OBJECT-TYPE
This object shows the channel modulation. Values: cqpsk(2) CQPSK qam16(3) 16-QAM qam128(4) 128-QAM qam32(5) 32-QAM qam64(6) 64-QAM qam4(7) 4-QAM qam8(8) 8-QAM qam256(9) 256-QAM qam512(10) 512-QAM qam1024(11) 1024-QAM
1.3.6.1.4.1.193.81.3.4.2.1.4.1.2ModemModulationread-onlycurrent
xfMMUMaxTribCapacity
OBJECT-TYPE
Max tributaries.
1.3.6.1.4.1.193.81.3.4.2.1.4.1.3Integer32read-onlycurrent
xfMMUDCNCapacity
OBJECT-TYPE
DCN Hop Capacity.
1.3.6.1.4.1.193.81.3.4.2.1.4.1.4Integer32read-onlycurrent
xfMMUMaxCapacity
OBJECT-TYPE
Max Capacity.
1.3.6.1.4.1.193.81.3.4.2.1.4.1.5Integer32read-onlycurrent
xfMMUFrameFormatType
OBJECT-TYPE
Frame format type. Values: fftUnknown(0) fftStatic(1) fftAdMod(2) fftXpic(3) fftXpicAdmod(4) fftLegacy(5)
1.3.6.1.4.1.193.81.3.4.2.1.4.1.6MMUFrameFormatTyperead-onlycurrent
xfMMUFrameFormatRev
OBJECT-TYPE
Frame format revision.
1.3.6.1.4.1.193.81.3.4.2.1.4.1.7INTEGER {ffOther(1), ffVersion0(2), ffVersion1(3), ffVersion2(4), ffVersion3(5), ffVersion4(6), ffVersion5(7), ffVersion6(8), ffVersion7(9), ffVersion8(10), ffVersion9(11), ffVersion10(12), ffVersion11(13), ffVersion12(14), ffVersion13(15), ffVersion14(16), ffVersion15(17)}read-onlycurrent
xfMMUBerAlarmThresholdCapability
OBJECT-TYPE
List of the allowed BER thresholds.
1.3.6.1.4.1.193.81.3.4.2.1.4.1.8Bits {berThrCap1e3(0), berThrCap1e4(1), berThrCap1e5(2), berThrCap1e6(3)}read-onlycurrent
xfRadioLinkPtpModemConformance
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.2.2
xfRadioLinkPtpModemCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.2.2.1
xfRadioLinkPtpModemGroups
OBJECT-IDENTITY
1.3.6.1.4.1.193.81.3.4.2.2.2

Conformance

NameOIDStatus
xfRadioLinkPtpModemFullCompliance
MODULE-COMPLIANCE
The compliance statement for SNMP entities which implement everything.
1.3.6.1.4.1.193.81.3.4.2.2.1.1current
xfRadioLinkPtpModemCompleteGroup
OBJECT-GROUP
A collection of all current objects in this MIB module.
1.3.6.1.4.1.193.81.3.4.2.2.2.1current