MIBs Depot

UBQS-INTERFACE-MIB

Registered at
1.3.6.1.4.1.7800.100.4
Last updated
2009-05-26 00:00
Organization
Ubiquoss Corp.
Namespace
ubiquoss
Source file
UBQS-INTERFACE-MIB
Digest
sha256:a164a9d7a1ceff8bab001cf1c172268ce6006e6d08adcf7b2ffe8621ea1c6973

Description

A MIB module for the physical interface in IF-MIB (RFC2863).

Contact

Ubiquoss Customer Service Postal: 24F Milennium B/D, 467-12, Dogok-Dong, GangNam-Gu, Seoul 135-270 Korea Tel: 82-2-2190-3100

Imports

FromSymbols
ENTITY-MIBentPhysicalIndex
IF-MIBInterfaceIndexOrZero, ifAdminStatus, ifIndex, ifName, ifOperStatus, ifType
Q-BRIDGE-MIBVlanIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue
UBQS-SMIubiMgmtv2
UBQS-TCIfOperStatusReason, UbiBridgeId, UbiPortList, Unsigned64

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
ENTITY-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
UBQS-INTERFACE-MIB
UBQS-SMI
UBQS-TC
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
PortGBICTypeList
TEXTUAL-CONVENTION
Represents the type of slot.
current
PortType
TEXTUAL-CONVENTION
Represents the port type.
current
UbiFlowctrlWatermark
TEXTUAL-CONVENTION
represent flowcontrol watermark value : '3d 3d' -------------------------- first value = wmpause(0-255) second value = wmcancel(0-255)
current
UbiSwitchportType
TEXTUAL-CONVENTION
A port type. The possible port types are: customerVlanPort(0) - Indicates a port is a C-tag aware port of an enterprise VLAN aware bridge. providerNetworkPort(1) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections within a PBN or PBBN. customerNetworkPort(2) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections to the exterior of a PBN or PBBN. customerEdgePort(3) - Indicates a port is a C-tag aware port of a Provider Bridge used for connections to the exterior of a PBN or PBBN. customerBackbonePort(4) - Indicates a port is a I-tag aware port of a Backbone Edge Bridge's B-component. virtualInstancePort(5) - Indicates a port is a virtual S-tag aware port within a Backbone Edge Bridge's I-component which is responsible for handling S-tagged traffic for a specific backbone service instance. dBridgePort(6) - Indicates a port is a VLAN-unaware member of an 802.1D bridge. access(7) trunk(8) hybrid(9)
current

Objects

NameOIDSyntaxAccessStatus
ubiInterfaceMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.0
ubiInterfaceNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.0.0
ubiTrafficControlNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.0.1
ubiInterfaceMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1
ubiIfNotificationEnables
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.1
ubiGrp1
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.1.1
ubiLinkUpDownEnabled
OBJECT-TYPE
This variable indicates whether the system produces the notification of linkup/down.
1.3.6.1.4.1.7800.100.4.1.1.1.1TruthValueread-writecurrent
ubiGrp2
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.1.2
ubiPortAutoNegoFaultEnabled
OBJECT-TYPE
This variable indicates whether the system produces the notification of the auto negotiation failure for a particular physical port.
1.3.6.1.4.1.7800.100.4.1.1.2.1TruthValueread-writecurrent
ubiLoadMonitorAlarmEnabled
OBJECT-TYPE
This variable indicates whether the system produces the notification of ubiLoadMonitorRisingAlarm and ubiLoadMonitorFallingAlarm.
1.3.6.1.4.1.7800.100.4.1.1.2.2Bits {input(0), crc(1), error(2), drop(3), output(4)}read-writecurrent
ubiTrafficControlAlarmEnabled
OBJECT-TYPE
This variable indicates whether the system produces the notification of ubiTrafficControlRisingAlarm and ubiTrafficControlFallingAlarm.
1.3.6.1.4.1.7800.100.4.1.1.2.3TruthValueread-writecurrent
ubiPortTable
OBJECT-TYPE
This table contains objects which provide more information about physical interface.
1.3.6.1.4.1.7800.100.4.1.2not-accessiblecurrent
ubiPortEntry
OBJECT-TYPE
An entry containing management information applicable to a particular physical interface.
1.3.6.1.4.1.7800.100.4.1.2.1not-accessiblecurrent
ubiPortName
OBJECT-TYPE
The physical port name.
1.3.6.1.4.1.7800.100.4.1.2.1.1DisplayStringread-onlycurrent
ubiPortType
OBJECT-TYPE
The type of the physical port.
1.3.6.1.4.1.7800.100.4.1.2.1.2PortTyperead-onlycurrent
ubiPortOperStatus
OBJECT-TYPE
The current operational status of the port. down(1) is down up(2) is up disable(3) is administratively down
1.3.6.1.4.1.7800.100.4.1.2.1.3INTEGER {down(1), up(2), disable(3)}read-onlycurrent
ubiPortDuplex
OBJECT-TYPE
Indicates whether the port is operating in half- duplex, full-duplex or auto negotiation mode.
1.3.6.1.4.1.7800.100.4.1.2.1.4INTEGER {half(1), full(2), auto(3)}read-onlycurrent
ubiPortSpeed
OBJECT-TYPE
The current operational speed of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.5INTEGER {auto(0), speed_10(10), speed_100(100), speed_1000(1000), speed_2500(2500), speed_10000(10000), speed_40000(40000)}read-onlycurrent
ubiPortAdminDuplex
OBJECT-TYPE
The desired duplex of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.6INTEGER {half(1), full(2), auto(3)}read-writecurrent
ubiPortAdminSpeed
OBJECT-TYPE
The desired speed of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.7INTEGER {auto(0), speed_10(10), speed_100(100), speed_1000(1000), speed_2500(2500), speed_10000(10000), speed_40000(40000)}read-writecurrent
ubiPortMtu
OBJECT-TYPE
The MTU value of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.8Integer32 (1500..10218)read-writecurrent
ubiPortL2L3IfState
OBJECT-TYPE
The operational mode of the port whether the port is layer 2 or layer 3.
1.3.6.1.4.1.7800.100.4.1.2.1.9INTEGER {routed(1), switchport(2)}read-writecurrent
ubiPortAutoNegoFaultState
OBJECT-TYPE
The link is down due to auto negotiation failure. This state indicates the state of auto negotiation failure for a particular port. But it's used for notification only.
1.3.6.1.4.1.7800.100.4.1.2.1.10INTEGER {ok(1), fail(2)}accessible-for-notifycurrent
ubiPortReset
OBJECT-TYPE
Reset the physical port.
1.3.6.1.4.1.7800.100.4.1.2.1.11INTEGER {none(0), reset(1)}read-writecurrent
ubiPortLocalSwitching
OBJECT-TYPE
Port local-switching
1.3.6.1.4.1.7800.100.4.1.2.1.12INTEGER {disable(0), enable(1)}read-writecurrent
ubiPortExt
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.3
ubiPortExtTable
OBJECT-TYPE
This table contains objects which provide more information about physical interface.
1.3.6.1.4.1.7800.100.4.1.3.1not-accessiblecurrent
ubiPortExtEntry
OBJECT-TYPE
An entry containing management information applicable to a particular physical interface.
1.3.6.1.4.1.7800.100.4.1.3.1.1not-accessiblecurrent
ubiPortGBICStatus
OBJECT-TYPE
The current operational status of the equipped slot.
1.3.6.1.4.1.7800.100.4.1.3.1.1.1INTEGER {none(0), in(1), out(2)}read-onlycurrent
ubiPortGBICType
OBJECT-TYPE
The current GBIC Type of the equipped slot. none(0): unequipped other(1) : equipped, none of the following list sfp(2) xfp(3) sfp-plus(4)
1.3.6.1.4.1.7800.100.4.1.3.1.1.2PortGBICTypeListread-onlycurrent
ubiPortGBICSerialNumber
OBJECT-TYPE
The serial number of this GBIC.
1.3.6.1.4.1.7800.100.4.1.3.1.1.3DisplayStringread-onlycurrent
ubiSwitchPort
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.4
ubiSwitchportTable
OBJECT-TYPE
A table contains the information for switchport.
1.3.6.1.4.1.7800.100.4.1.4.1not-accessiblecurrent
ubiSwitchportEntry
OBJECT-TYPE
A list of information for each switchport.
1.3.6.1.4.1.7800.100.4.1.4.1.1not-accessiblecurrent
ubiSwitchportName
OBJECT-TYPE
A textual string containing information about the interface.
1.3.6.1.4.1.7800.100.4.1.4.1.1.1DisplayStringread-onlycurrent
ubiSwitchportMode
OBJECT-TYPE
A port type. The possible port types are: customerVlanPort(0) - Indicates a port is a C-tag aware port of an enterprise VLAN aware bridge. providerNetworkPort(1) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections within a PBN or PBBN. customerNetworkPort(2) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections to the exterior of a PBN or PBBN. customerEdgePort(3) - Indicates a port is a C-tag aware port of a Provider Bridge used for connections to the exterior of a PBN or PBBN. customerBackbonePort(4) - Indicates a port is a I-tag aware port of a Backbone Edge Bridge's B-component. virtualInstancePort(5) - Indicates a port is a virtual S-tag aware port within a Backbone Edge Bridge's I-component which is responsible for handling S-tagged traffic for a specific backbone service instance. dBridgePort(6) - Indicates a port is a VLAN-unaware member of an 802.1D bridge. access(7) trunk(8) hybrid(9)
1.3.6.1.4.1.7800.100.4.1.4.1.1.2UbiSwitchportTyperead-writecurrent
ubiSwitchportBridgeId
OBJECT-TYPE
This object is used to allocate the bridge group id.
1.3.6.1.4.1.7800.100.4.1.4.1.1.3UbiBridgeIdread-writecurrent
ubiSwitchportVlanNative
OBJECT-TYPE
The native vlan of a switchport.
1.3.6.1.4.1.7800.100.4.1.4.1.1.4VlanIndexread-writecurrent
ubiSwitchportVlanDefault
OBJECT-TYPE
The default vlan of a switchport.
1.3.6.1.4.1.7800.100.4.1.4.1.1.5VlanIndexread-writecurrent
ubiSwitchPortVlanControlTable
OBJECT-TYPE
This table contains the control information of vlan for switchport.
1.3.6.1.4.1.7800.100.4.1.4.2not-accessiblecurrent
ubiSwitchPortVlanControlEntry
OBJECT-TYPE
A list of vlan control for each switchport.
1.3.6.1.4.1.7800.100.4.1.4.2.1not-accessiblecurrent
ubiSwitchportVlanTaggedSet
OBJECT-TYPE
The operational set of the switchport for a specific tagged vlan. If a value of set is all(4), the vlan index should be a zero.
1.3.6.1.4.1.7800.100.4.1.4.2.1.1INTEGER {other(0), add(1), delete(2), except(3), all(4), none(5)}read-writecurrent
ubiSwitchportVlanUntaggedSet
OBJECT-TYPE
The operational set of the switchport for a specific untagged vlan. If a value of set is all(4), the vlan index should be a zero.
1.3.6.1.4.1.7800.100.4.1.4.2.1.2INTEGER {other(0), add(1), delete(2)}read-writecurrent
ubiSwitchportVlanEgressTaggedSet
OBJECT-TYPE
The operational set of the switchport for a egress tagged vlan.
1.3.6.1.4.1.7800.100.4.1.4.2.1.3INTEGER {enable(1), disable(2)}read-writecurrent
ubiSwitchVlanStackingTable
OBJECT-TYPE
This table contains the stacking information of vlan for switchport.
1.3.6.1.4.1.7800.100.4.1.4.3not-accessiblecurrent
ubiSwitchVlanStackingEntry
OBJECT-TYPE
A list of vlan stacking for each switchport.
1.3.6.1.4.1.7800.100.4.1.4.3.1not-accessiblecurrent
ubiVlanStackingMode
OBJECT-TYPE
vlan-stacking mode
1.3.6.1.4.1.7800.100.4.1.4.3.1.1INTEGER {disable(0), customerEdgePort(1), providerPort(2)}read-writecurrent
ubiVlanStackingEthertype
OBJECT-TYPE
vlan-stacking ethertype (format : 0xhhhh)
1.3.6.1.4.1.7800.100.4.1.4.3.1.2DisplayStringread-writecurrent
ubiPortTrafficControl
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.5
ubiLoadMonitorTable
OBJECT-TYPE
This table contains the information of load monitoring.
1.3.6.1.4.1.7800.100.4.1.5.1not-accessiblecurrent
ubiLoadMonitorEntry
OBJECT-TYPE
A list of load monitoring configuration.
1.3.6.1.4.1.7800.100.4.1.5.1.1not-accessiblecurrent
ubiLoadMonitorType
OBJECT-TYPE
This object specifies the type of load monitoring. For example, If type is input, ubiLoadMonitorVariable should be the particular variable related to the input statistics.
1.3.6.1.4.1.7800.100.4.1.5.1.1.1INTEGER {input(1), crc(2), error(3), drop(4), output(5), storm-control-discard(6)}read-onlycurrent
ubiLoadMonitorInterval
OBJECT-TYPE
The monitoring interval.
1.3.6.1.4.1.7800.100.4.1.5.1.1.2Integer32read-createcurrent
ubiLoadMonitorVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled for load monitoring. this variable is decided by ubiLoadMonitorType. variable mapping information for load monitoring: type object identifier --------------- ------------------------- INPUT ifHCInOctets (64bit) OUTPUT ifHCOutOctets (64bit) CRC ubiIfStatsInCRCErrors (64bit) DISCARD ifInDiscards (32bit) ERROR ifInErrors (32bit) STORM-DISCARD ubiStormTotalDiscards (64bit)
1.3.6.1.4.1.7800.100.4.1.5.1.1.3OBJECT IDENTIFIERread-onlycurrent
ubiLoadMonitorValue
OBJECT-TYPE
The sampling value of the statistic for the particular variable.
1.3.6.1.4.1.7800.100.4.1.5.1.1.4Counter64read-onlycurrent
ubiLoadMonitorCriticalThreshold
OBJECT-TYPE
The critical threshold for the sampled statistics.
1.3.6.1.4.1.7800.100.4.1.5.1.1.5Integer32read-createcurrent
ubiLoadMonitorMajorThreshold
OBJECT-TYPE
The major threshold for the sampled statistics.
1.3.6.1.4.1.7800.100.4.1.5.1.1.6Integer32read-createcurrent
ubiLoadMonitorUnit
OBJECT-TYPE
The unit of the sampled statistics and threshold value.
1.3.6.1.4.1.7800.100.4.1.5.1.1.7DisplayStringread-onlycurrent
ubiLoadMonitorAlarmType
OBJECT-TYPE
The alarm type. This object is used for notification only.
1.3.6.1.4.1.7800.100.4.1.5.1.1.8INTEGER {none(0), critical(1), major(2)}accessible-for-notifycurrent
ubiLoadMonitorRowStatus
OBJECT-TYPE
The row status of this entry.
1.3.6.1.4.1.7800.100.4.1.5.1.1.9RowStatusread-createcurrent
ubiLoadMonitorAlarmZone
OBJECT-TYPE
This object indicates the current alarm zone.
1.3.6.1.4.1.7800.100.4.1.5.1.1.10INTEGER {normal(0), critical(1), major(2)}accessible-for-notifycurrent
ubiTrafficControl
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.5.2
ubiTrafficControlConfig
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.5.2.1
ubiTrafficControlReportInterval
OBJECT-TYPE
Interval when alarm is up/down according to traffic count
1.3.6.1.4.1.7800.100.4.1.5.2.1.1INTEGER {default(1)}read-writecurrent
ubiTrafficControlObservingPeriod
OBJECT-TYPE
Period for counting traffic
1.3.6.1.4.1.7800.100.4.1.5.2.1.2INTEGER {default(1)}read-writecurrent
ubiTrafficControlHighAlarmMode
OBJECT-TYPE
Action that is operated when traffic is over high-threshold
1.3.6.1.4.1.7800.100.4.1.5.2.1.3INTEGER {repeatable(0), once(1), disable(2)}read-writecurrent
ubiTrafficControlLowAlarmMode
OBJECT-TYPE
Action that is operated when traffic is below low-threshold
1.3.6.1.4.1.7800.100.4.1.5.2.1.4INTEGER {once(1), disable(2)}read-writecurrent
ubiTrafficControlTable
OBJECT-TYPE
The table for traffic-control configuration
1.3.6.1.4.1.7800.100.4.1.5.2.2not-accessiblecurrent
ubiTrafficControlEntry
OBJECT-TYPE
The entry representing traffic-control config. Index description a) ubiTrafficControlIfindex : interface index b) ubiTrafficControlBaseType : base type of traffic value - pps(1), kbps(2) c) ubiTrafficControlTrafficType : type of traffic value - all(1), unicast(2), broadcast(3), multicast(4) d) ubiTrafficControlDirection : direction of traffic value - inbound(1), outbound(2)
1.3.6.1.4.1.7800.100.4.1.5.2.2.1not-accessiblecurrent
ubiTrafficControlIfindex
OBJECT-TYPE
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.1Integer32read-onlycurrent
ubiTrafficControlBaseType
OBJECT-TYPE
Base type of traffic.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.2INTEGER {pps(1), kbps(2)}read-onlycurrent
ubiTrafficControlType
OBJECT-TYPE
Type of traffic. Type based on KBPS must be only all(0). remains are only for pps.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.3INTEGER {all(1), broadcast(2), multicast(3), unicast(4)}read-onlycurrent
ubiTrafficControlDirection
OBJECT-TYPE
Direction of traffic.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.4INTEGER {inbound(1), outbound(2)}read-onlycurrent
ubiTrafficControlHighThreshold
OBJECT-TYPE
Traffic high-threshold. Type based on KBPS could has threshold less than 1000000.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.5Integer32 (1..1500000)read-createcurrent
ubiTrafficControlLowThreshold
OBJECT-TYPE
Traffic low-threshold. Type based on KBPS could has threshold less than 1000000.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.6Integer32 (1..1500000)read-createcurrent
ubiTrafficControlAction
OBJECT-TYPE
Traffic action type.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.7INTEGER {alarmOnly(1), blockMode(2)}read-createcurrent
ubiTrafficControlStatus
OBJECT-TYPE
Interface's current status.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.8INTEGER {normal(1), alarm(2), block(3)}read-onlycurrent
ubiTrafficControlAverageRate
OBJECT-TYPE
Average rate of controlled traffic.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.9DisplayStringread-onlycurrent
ubiTrafficControlOneMinRate
OBJECT-TYPE
Rate of controlled traffic per 1 minute.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.10DisplayStringread-onlycurrent
ubiTrafficControlAlarmCount
OBJECT-TYPE
Number of alarmed times.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.11Integer32read-onlycurrent
ubiTrafficControlLastAlarmTime
OBJECT-TYPE
Last alarmed time
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.12DisplayStringread-onlycurrent
ubiTrafficControlRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.13RowStatusread-createcurrent
ubiClearTrafficControl
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.5.2.3
ubiClearTrafficControlInterface
OBJECT-TYPE
If value is 0, clear all interface. If value is ifindex, clear specific interface (only physical interface)
1.3.6.1.4.1.7800.100.4.1.5.2.3.1Integer32read-writecurrent
ubiClearTrafficControlBaseType
OBJECT-TYPE
Traffic-control base type. 'none' value means all base type.
1.3.6.1.4.1.7800.100.4.1.5.2.3.2INTEGER {none(0), pps(1), kbps(2)}read-writecurrent
ubiClearTrafficControlType
OBJECT-TYPE
Traffic-control type. Type based on KBPS must be all. 'none' value means all traffic type.
1.3.6.1.4.1.7800.100.4.1.5.2.3.3INTEGER {none(0), all(1), unicast(2), broadcast(3), multicast(4)}read-writecurrent
ubiClearTrafficControlDirection
OBJECT-TYPE
Traffic-control direction. 'none' value means all direction.
1.3.6.1.4.1.7800.100.4.1.5.2.3.4INTEGER {none(0), inbound(1), outbound(2)}read-writecurrent
ubiClearTrafficControlOperate
OBJECT-TYPE
clear excute
1.3.6.1.4.1.7800.100.4.1.5.2.3.5INTEGER {none(0), excute(1)}read-writecurrent
ubiIfStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.6
ubiIfEgressQueueStatsTable
OBJECT-TYPE
This table contains the information for egress queue statistics.
1.3.6.1.4.1.7800.100.4.1.6.1not-accessiblecurrent
ubiIfEgressQueueStatsEntry
OBJECT-TYPE
A list of the port that configure cos feild. that port collects the pass and drop statistics for egress queue.
1.3.6.1.4.1.7800.100.4.1.6.1.1not-accessiblecurrent
ubiIfEqStatsQueueId
OBJECT-TYPE
The queue identifier.
1.3.6.1.4.1.7800.100.4.1.6.1.1.1Integer32 (0..7)not-accessiblecurrent
ubiIfEqStatsPassOctets
OBJECT-TYPE
The pass counter for bytes.
1.3.6.1.4.1.7800.100.4.1.6.1.1.2Counter64read-onlycurrent
ubiIfEqStatsDropOctets
OBJECT-TYPE
The drop counter for bytes.
1.3.6.1.4.1.7800.100.4.1.6.1.1.3Counter64read-onlycurrent
ubiIfEqStatsPassPkts
OBJECT-TYPE
The pass counter for packets.
1.3.6.1.4.1.7800.100.4.1.6.1.1.4Counterread-onlycurrent
ubiIfEqStatsDropPkts
OBJECT-TYPE
The drop counter for packets.
1.3.6.1.4.1.7800.100.4.1.6.1.1.5Counterread-onlycurrent
ubiIfEqStatsQueueDescr
OBJECT-TYPE
A textual string containing information about the interface's each queue.
1.3.6.1.4.1.7800.100.4.1.6.1.1.6DisplayStringread-writecurrent
ubiIfStatsTable
OBJECT-TYPE
This table contains the statistics for physical port.
1.3.6.1.4.1.7800.100.4.1.6.2not-accessiblecurrent
ubiIfStatsEntry
OBJECT-TYPE
A Entry contains the statistics of a particular physical port.
1.3.6.1.4.1.7800.100.4.1.6.2.1not-accessiblecurrent
ubiIfStatsInPkts
OBJECT-TYPE
The number of input packets for a given physical port.
1.3.6.1.4.1.7800.100.4.1.6.2.1.1Counter64read-onlycurrent
ubiIfStatsOutPkts
OBJECT-TYPE
The number of output packets for a given physical interface.
1.3.6.1.4.1.7800.100.4.1.6.2.1.2Counter64read-onlycurrent
ubiIfStatsInCRCErrors
OBJECT-TYPE
The number of input CRC errors for a given interface.
1.3.6.1.4.1.7800.100.4.1.6.2.1.3Counter64read-onlycurrent
ubiIfStatsCounterClear
OBJECT-TYPE
Initialize the counter
1.3.6.1.4.1.7800.100.4.1.6.2.1.14INTEGER {none(0), clear(1)}read-writecurrent
ubiIfStatsSnmpClear
OBJECT-TYPE
Initialize the statistics in this table.
1.3.6.1.4.1.7800.100.4.1.6.2.1.15INTEGER {none(0), clear(1)}read-writecurrent
ubiTrafficRateTable
OBJECT-TYPE
traffic rate per interface
1.3.6.1.4.1.7800.100.4.1.6.3not-accessiblecurrent
ubiTrafficRateEntry
OBJECT-TYPE
traffic rate per interface
1.3.6.1.4.1.7800.100.4.1.6.3.1not-accessiblecurrent
ubiIfStatsInTrafficRate
OBJECT-TYPE
1.3.6.1.4.1.7800.100.4.1.6.3.1.1Counter64read-onlycurrent
ubiIfStatsOutTrafficRate
OBJECT-TYPE
1.3.6.1.4.1.7800.100.4.1.6.3.1.2Counter64read-onlycurrent
ubiPortControl
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.7
ubiFlowControlTable
OBJECT-TYPE
The table of flowcontrol information on physical ports.
1.3.6.1.4.1.7800.100.4.1.7.1not-accessiblecurrent
ubiFlowControlEntry
OBJECT-TYPE
An entry of flowcontrol information on physical port.
1.3.6.1.4.1.7800.100.4.1.7.1.1not-accessiblecurrent
ubiFlowctrlReceive
OBJECT-TYPE
flowcontrol on receive.
1.3.6.1.4.1.7800.100.4.1.7.1.1.1INTEGER {off(0), on(1)}read-writecurrent
ubiFlowctrlSend
OBJECT-TYPE
flowcontrol on send
1.3.6.1.4.1.7800.100.4.1.7.1.1.2INTEGER {off(0), on(1)}read-writecurrent
ubiFlowctrlWatermark
OBJECT-TYPE
flowcontrol watermark value
1.3.6.1.4.1.7800.100.4.1.7.1.1.3UbiFlowctrlWatermarkread-writecurrent
ubiRateLimit
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.7.2
ubiRateLimitTable
OBJECT-TYPE
The table of rate-limit information on physical ports
1.3.6.1.4.1.7800.100.4.1.7.2.1not-accessiblecurrent
ubiRateLimitEntry
OBJECT-TYPE
An entry of rate-limit information on physical port
1.3.6.1.4.1.7800.100.4.1.7.2.1.1not-accessiblecurrent
ubiEgressTrafficRate
OBJECT-TYPE
egress traffic rate
1.3.6.1.4.1.7800.100.4.1.7.2.1.1.1Integer32 (1..10000000)read-writecurrent
ubiEgressBucketSize
OBJECT-TYPE
egress bucket size
1.3.6.1.4.1.7800.100.4.1.7.2.1.1.2Integer32 (1..4095)read-writecurrent
ubiIngressLevel
OBJECT-TYPE
ingress level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.2.1.1.3DisplayStringread-writecurrent
ubiRateLimitQueueEgressTable
OBJECT-TYPE
The table of rate-limit q-egress information on physical ports
1.3.6.1.4.1.7800.100.4.1.7.2.2not-accessiblecurrent
ubiRateLimitQueueEgressEntry
OBJECT-TYPE
An entry of rate-limit q-egress information on physical port
1.3.6.1.4.1.7800.100.4.1.7.2.2.1not-accessiblecurrent
ubiQueueId
OBJECT-TYPE
queue id
1.3.6.1.4.1.7800.100.4.1.7.2.2.1.1Integer32 (0..7)not-accessiblecurrent
ubiQueueEgressTrafficRate
OBJECT-TYPE
q-egress traffic rate
1.3.6.1.4.1.7800.100.4.1.7.2.2.1.2Integer32 (1..10000000)read-writecurrent
ubiQueueEgressBucketSize
OBJECT-TYPE
q-egress bucket size
1.3.6.1.4.1.7800.100.4.1.7.2.2.1.3Integer32 (1..4095)read-writecurrent
ubiStormControlTable
OBJECT-TYPE
The table of storm-control information on physical ports
1.3.6.1.4.1.7800.100.4.1.7.3not-accessiblecurrent
ubiStormControlEntry
OBJECT-TYPE
An entry of storm-control information on physical port
1.3.6.1.4.1.7800.100.4.1.7.3.1not-accessiblecurrent
ubiBroadcastLevel
OBJECT-TYPE
broadcast control level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.3.1.1DisplayStringread-writecurrent
ubiMulticastLevel
OBJECT-TYPE
multicast control level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.3.1.2DisplayStringread-writecurrent
ubiUnicastLevel
OBJECT-TYPE
unicast control level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.3.1.3DisplayStringread-writecurrent
ubiStormDiscardStats
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.7.4
ubiStormDiscardStatsClear
OBJECT-TYPE
Initialize the counters for discarded packet by Storm-Control.
1.3.6.1.4.1.7800.100.4.1.7.4.1INTEGER {none(0), clear(1)}read-writecurrent
ubiStormDiscardStatsTable
OBJECT-TYPE
This table contains the statistics of discarded packets by Storm-control on physical ports
1.3.6.1.4.1.7800.100.4.1.7.4.2not-accessiblecurrent
ubiStormDiscardStatsEntry
OBJECT-TYPE
An entry of storm-control discard statistics on physical port
1.3.6.1.4.1.7800.100.4.1.7.4.2.1not-accessiblecurrent
ubiStormUnicastDiscards
OBJECT-TYPE
The number of discarded Unicast packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.1Counter64read-onlycurrent
ubiStormMulticastDiscards
OBJECT-TYPE
The number of discarded Multicast packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.2Counter64read-onlycurrent
ubiStormBroadcastDiscards
OBJECT-TYPE
The number of discarded Broadcast packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.3Counter64read-onlycurrent
ubiStormTotalDiscards
OBJECT-TYPE
The Total number of discarded packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.4Counter64read-onlycurrent
ubiIfErps
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.1.8
ubiIfErpsTable
OBJECT-TYPE
The table of ERPS information on interface.
1.3.6.1.4.1.7800.100.4.1.8.1not-accessiblecurrent
ubiIfErpsEntry
OBJECT-TYPE
The entry of ERPS information on interface.
1.3.6.1.4.1.7800.100.4.1.8.1.1not-accessiblecurrent
ubiInterfaceMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.2
ubiInterfaceMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.2.1
ubiInterfaceMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.4.2.2

Notifications

NameOIDStatus
ubiPortAutoNegoFault
NOTIFICATION-TYPE
A ubiPortAutoNegoFault notification is sent at auto negotiation failure for a particular physical port.
1.3.6.1.4.1.7800.100.4.0.0.1current
ubiLoadMonitorRisingAlarm
NOTIFICATION-TYPE
A ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its rising threshold.
1.3.6.1.4.1.7800.100.4.0.1.1current
ubiLoadMonitorFallingAlarm
NOTIFICATION-TYPE
A ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its falling threshold.
1.3.6.1.4.1.7800.100.4.0.1.2current
ubiTrafficControlRisingAlarm
NOTIFICATION-TYPE
A ubiTrafficControlRisingAlarm is sent when ubiTrafficControlOneMinRate is greater than current threshold.
1.3.6.1.4.1.7800.100.4.0.1.3current
ubiTrafficControlFallingAlarm
NOTIFICATION-TYPE
A ubiTrafficControlFallingAlarm is sent when ubiTrafficControlOneMinRate is less than current threshold.
1.3.6.1.4.1.7800.100.4.0.1.4current

Conformance

NameOIDStatus
ubiInterfaceMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the UBQS-INTERFACE-MIB
1.3.6.1.4.1.7800.100.4.2.1.1current
ubiPortGroup
OBJECT-GROUP
A collection of objects containing information about physical port.
1.3.6.1.4.1.7800.100.4.2.2.1current
ubiIfStatsGroup
OBJECT-GROUP
A collection of objects containing packet statistics for a given port.
1.3.6.1.4.1.7800.100.4.2.2.2current
ubiSwitchportGroup
OBJECT-GROUP
A collection of objects containing the switchport information.
1.3.6.1.4.1.7800.100.4.2.2.3current