SLE-Network6-MIB
- Registered at
- 1.3.6.1.4.1.6296.101.26
- Last updated
- 2015-01-06 09:17
- Organization
- HANASOFT
- Revisions
- 2015-01-07 09:01
- Namespace
- dasan
- Source file
SLE-Network6-MIB- Digest
sha256:41b66365cf541545bdec3e45c101475217ced19bf2bfb5f1445eec85914e1906
Description
This MIB contains information about Network6.
Imports
| From | Symbols |
|---|---|
| DASAN-SMI | sleMgmt |
| INET-ADDRESS-MIB | InetAddressIPv6, InetAddressPrefixLength |
| SLE-NETWORK-MIB | sleIpVRFIndex |
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | BITS, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DASAN-SMI IANAifType-MIB IF-MIB INET-ADDRESS-MIB SLE-NETWORK-MIB SLE-Network6-MIB SLE-TC-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sleNetInterface6 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.1 | |||
| sleNetIf6Table OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1 | not-accessible | current | |
| sleNetIf6Entry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1 | not-accessible | current | |
| sleNetIf6Index OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.1 | INTEGER (0..65535) | read-write | current |
| sleNetIf6Name OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.2 | OCTET STRING | read-write | current |
| sleNetIf6Ipv6State OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.3 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6Mode OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.4 | INTEGER {host(1), router(2)} | read-write | current |
| sleNetIf6RouteMap OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.5 | OCTET STRING | read-write | current |
| sleNetIf6AddrAutoConf OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.6 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6AddrAutoConfDefault OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.7 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6NdRouterPref OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.8 | INTEGER {high(1), low(2), medium(3)} | read-write | current |
| sleNetIf6SuppressRA OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.9 | INTEGER {unset(0), set(1)} | read-write | current |
| sleNetIf6NdRaMaxInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.10 | INTEGER (-1 | 3..1800) | read-write | current |
| sleNetIf6NdRaMinInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.11 | INTEGER (-1 | 3..1350) | read-write | current |
| sleNetIf6NdRaLifeTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.12 | INTEGER (-1 | 0..9000) | read-write | current |
| sleNetIf6NdRaReachTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.13 | INTEGER (-1 | 0..3600000) | read-write | current |
| sleNetIf6NdRaHopLimit OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.14 | INTEGER (-1 | 0..255) | read-write | current |
| sleNetIf6NdRetransTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.15 | Gauge32 (0..4294967295) | read-write | current |
| sleNetIf6NdMFlag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.16 | INTEGER {unset(0), set(1)} | read-write | current |
| sleNetIf6NdOFlag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.17 | INTEGER {unset(0), set(1)} | read-write | current |
| sleNetIf6NdProxy OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.18 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6NdDadAttempt OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.1.1.19 | INTEGER (0..600) | read-write | current |
| sleNetIf6Identifier OBJECT-TYPE Set interface identifier on interface | 1.3.6.1.4.1.6296.101.26.1.1.1.20 | OCTET STRING | read-only | current |
| sleNetIf6Ip6MartianFilter OBJECT-TYPE IPv6 Martian Filter configuration | 1.3.6.1.4.1.6296.101.26.1.1.1.21 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleNetIf6Control OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.1.2 | |||
| sleNetIf6ControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.1 | INTEGER {setIPv6State(1), setMode(2), setAddrAutoConf(3), setNdProfile(4), setRouteMap(5), unsetRouteMap(6), setIdentifier(7), setIp6MartianFilter(8)} | read-write | current |
| sleNetIf6ControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.2 | SleControlStatusType | read-write | current |
| sleNetIf6ControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.3 | Gauge32 | read-write | current |
| sleNetIf6ControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.4 | TimeTicks | read-write | current |
| sleNetIf6ControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.5 | SleControlRequestResultType | read-write | current |
| sleNetIf6ControlIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.6 | INTEGER | read-write | current |
| sleNetIf6ControlIpv6State OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.7 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6ControlMode OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.8 | INTEGER {host(1), router(2)} | read-write | current |
| sleNetIf6ControlRouteMap OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.9 | OCTET STRING | read-write | current |
| sleNetIf6ControlAutoConf OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.10 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6ControlAutoConfDefault OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.11 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6ControlNdRouterPref OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.12 | INTEGER {high(1), row(2), medium(3)} | read-write | current |
| sleNetIf6ControlNdSuppressRA OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.13 | INTEGER {unset(0), set(1)} | read-write | current |
| sleNetIf6ControlNdMaxInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.14 | INTEGER (-1 | 3..1800) | read-write | current |
| sleNetIf6ControlNdMinInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.15 | INTEGER (-1 | 3..1350) | read-write | current |
| sleNetIf6ControlNdRaLifeTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.16 | INTEGER (-1 | 0..9000) | read-write | current |
| sleNetIf6ControlNdRaReachTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.17 | INTEGER (-1 | 0..3600000) | read-write | current |
| sleNetIf6ControlNdRaHopLimit OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.18 | INTEGER (-1 | 0..255) | read-write | current |
| sleNetIf6ControlNdRetransTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.19 | Gauge32 (0..4294967295) | read-write | current |
| sleNetIf6ControlNdMFlag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.20 | INTEGER {unset(0), set(1)} | read-write | current |
| sleNetIf6ControlNdOFlag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.21 | INTEGER {unset(0), set(1)} | read-write | current |
| sleNetIf6ControlNdProxy OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.22 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6ControlNdDadAttempt OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.2.23 | INTEGER (0..600) | read-write | current |
| sleNetIf6ControlIdentifier OBJECT-TYPE Set interface identifier on interface | 1.3.6.1.4.1.6296.101.26.1.2.24 | OCTET STRING | read-write | current |
| sleNetIf6ControlIp6MartianFilter OBJECT-TYPE IPv6 Martian Filter configuration | 1.3.6.1.4.1.6296.101.26.1.2.25 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNetIf6Notification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.1.3 | |||
| sleIpAddress6 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.2 | |||
| sleIpAddr6Table OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.1 | not-accessible | current | |
| sleIpAddr6Entry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.1.1 | not-accessible | current | |
| sleIpAddr6Value OBJECT-TYPE IP address of a Interface | 1.3.6.1.4.1.6296.101.26.2.1.1.1 | InetAddressIPv6 | read-only | current |
| sleIpAddr6Mask OBJECT-TYPE IP mask of a Interface | 1.3.6.1.4.1.6296.101.26.2.1.1.2 | InetAddressPrefixLength | read-only | current |
| sleIpAddr6Score OBJECT-TYPE Score of IP address | 1.3.6.1.4.1.6296.101.26.2.1.1.3 | INTEGER {linklocal(1), global(2), anycast(3), host(4)} | read-only | current |
| sleIpAddr6Type OBJECT-TYPE Type of IP address | 1.3.6.1.4.1.6296.101.26.2.1.1.4 | INTEGER {auto(1), manual(2)} | read-only | current |
| sleIpAddr6Status OBJECT-TYPE Status of IP address | 1.3.6.1.4.1.6296.101.26.2.1.1.5 | INTEGER {active(1), dadfailed(2), tentative(3), deprecated(4)} | read-only | current |
| sleIpAddr6ValidTime OBJECT-TYPE Valid Time of IP address | 1.3.6.1.4.1.6296.101.26.2.1.1.6 | Integer32 | read-only | current |
| sleIpAddr6UsedTime OBJECT-TYPE Used Time of IP address | 1.3.6.1.4.1.6296.101.26.2.1.1.7 | Integer32 | read-only | current |
| sleIpAddr6Control OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.2.2 | |||
| sleIpAddr6ControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.1 | INTEGER {createIP6Addr(1), deleteIP6Addr(2), deleteIP6AddrAll(3)} | read-write | current |
| sleIpAddr6ControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.2 | SleControlStatusType | read-only | current |
| sleIpAddr6ControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.3 | Gauge32 | read-write | current |
| sleIpAddr6ControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.4 | TimeTicks | read-only | current |
| sleIpAddr6ControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.5 | SleControlRequestResultType | read-only | current |
| sleIPAddr6ControlIfIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.6 | INTEGER (0..65535) | read-write | current |
| sleIPAddr6ControlValue OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.7 | InetAddressIPv6 | read-write | current |
| sleIPAddr6ControlMask OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.8 | InetAddressPrefixLength | read-write | current |
| sleIPAddr6ControlScore OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.9 | INTEGER {linklocal(1), global(2), anycast(3), host(4)} | read-write | current |
| sleIPAddr6ControlType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.10 | INTEGER {auto(1), manual(2)} | read-write | current |
| sleIPAddr6ControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.11 | INTEGER {active(1), dadfailed(2), tentative(3), deprecated(4)} | read-write | current |
| sleIPAddr6ControlValidTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.12 | INTEGER (0..65535000) | read-write | current |
| sleIPAddr6ControlUsedTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.2.13 | INTEGER (0..65535000) | read-write | current |
| sleIpAddr6Notification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.2.3 | |||
| sleNdPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.3 | |||
| sleNdPrefixTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.1 | not-accessible | current | |
| sleNdPrefixEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.1.1 | not-accessible | current | |
| sleNdPrefixDefault OBJECT-TYPE If default flag is set, prefix value and mask have no mean. | 1.3.6.1.4.1.6296.101.26.3.1.1.1 | INTEGER {no(0), yes(1)} | read-write | current |
| sleNdPrefixValue OBJECT-TYPE ND prefix value (X:X::X:X) | 1.3.6.1.4.1.6296.101.26.3.1.1.2 | InetAddressIPv6 | read-write | current |
| sleNdPrefixMask OBJECT-TYPE ND prefix mask | 1.3.6.1.4.1.6296.101.26.3.1.1.3 | InetAddressPrefixLength (0..65535) | read-write | current |
| sleNdPrefixValTime OBJECT-TYPE Valid lifetime of prefix (second) | 1.3.6.1.4.1.6296.101.26.3.1.1.4 | Gauge32 (0..4294967295) | read-write | current |
| sleNdPrefixPreTime OBJECT-TYPE Preferred lifetime of prefix (second) | 1.3.6.1.4.1.6296.101.26.3.1.1.5 | Gauge32 (0..4294967295) | read-write | current |
| sleNdPrefixOffLink OBJECT-TYPE Use or do not use prefix for onlink determination | 1.3.6.1.4.1.6296.101.26.3.1.1.6 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNdPrefixNoAutoconfig OBJECT-TYPE Use or do not use prefix for autoconfiguration | 1.3.6.1.4.1.6296.101.26.3.1.1.7 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNdPrefixControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.3.2 | |||
| sleNdPrefixControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.1 | INTEGER {createNdPrefix(1), deleteNdPrefix(2)} | read-write | current |
| sleNdPrefixControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.2 | SleControlStatusType | read-write | current |
| sleNdPrefixControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.3 | Gauge32 | read-write | current |
| sleNdPrefixControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.4 | TimeTicks | read-write | current |
| sleNdPrefixControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.5 | SleControlRequestResultType | read-write | current |
| sleNdPrefixControlIfIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.6 | INTEGER (0..65535) | read-write | current |
| sleNdPrefixControlDefault OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.7 | INTEGER {no(0), yes(1)} | read-write | current |
| sleNdPrefixControlValue OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.8 | InetAddressIPv6 | read-write | current |
| sleNdPrefixControlMask OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.9 | InetAddressPrefixLength | read-write | current |
| sleNdPrefixControlValTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.10 | Gauge32 (0..4294967295) | read-write | current |
| sleNdPrefixControlPreTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.11 | Gauge32 (0..4294967295) | read-write | current |
| sleNdPrefixControlOffLink OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.12 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNdPrefixControlNoAutoconfig OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.2.13 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleNdPrefixNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.3.3 | |||
| sleNeighbour6 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.4 | |||
| sleNeighbour6Table OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.1 | not-accessible | current | |
| sleNeighbour6Entry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.1.1 | not-accessible | current | |
| sleNeighbour6Address OBJECT-TYPE The IP6Address corresponding to the media-dependent `physical' address. | 1.3.6.1.4.1.6296.101.26.4.1.1.1 | InetAddressIPv6 | read-write | current |
| sleNeighbour6PhyAddress OBJECT-TYPE The media-dependent `physical' address. | 1.3.6.1.4.1.6296.101.26.4.1.1.2 | OCTET STRING | read-write | current |
| sleNeighbour6PortIndex OBJECT-TYPE The interface on which this entry's equivalence is effective. 0: for any ports. (if sleNeighbour6HwUsed is 0, always 0) | 1.3.6.1.4.1.6296.101.26.4.1.1.3 | INTEGER (0..255) | read-write | current |
| sleNeighbour6State OBJECT-TYPE Neighbour6 entry's currently status. | 1.3.6.1.4.1.6296.101.26.4.1.1.4 | INTEGER {static(0), dynamic(1)} | read-write | current |
| sleNeighbour6HwType OBJECT-TYPE Hardware Type of media | 1.3.6.1.4.1.6296.101.26.4.1.1.5 | INTEGER {ethernet(1)} | read-write | current |
| sleNeighbour6HwUsed OBJECT-TYPE Neighbour6 entry's currently chip usage state. | 1.3.6.1.4.1.6296.101.26.4.1.1.6 | INTEGER {nonused(0), used(1)} | read-write | current |
| sleNeighbour6Control OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.4.2 | |||
| sleNeighbour6ControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.1 | INTEGER {createNeighbour6(1), deleteNeighbour6(2), clearNeighbour6(3), clearNeighbour6ByAddr(4)} | read-write | current |
| sleNeighbour6ControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.2 | SleControlStatusType | read-write | current |
| sleNeighbour6ControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.3 | Gauge32 | read-write | current |
| sleNeighbour6ControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.4 | TimeTicks | read-write | current |
| sleNeighbour6ControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.5 | SleControlRequestResultType | read-write | current |
| sleNeighbour6ControlIfIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.6 | INTEGER (0..65535) | read-write | current |
| sleNeighbour6ControlAddress OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.7 | InetAddressIPv6 | read-write | current |
| sleNeighbour6ControlPhyAddress OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.8 | OCTET STRING | read-write | current |
| sleNeighbour6ControlMask OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.2.9 | INTEGER (0..128) | read-write | current |
| sleNeighbour6Notification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.4.3 | |||
| sleRoute6 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.5 | |||
| sleRoute6Table OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.1 | not-accessible | current | |
| sleRoute6Entry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.1.1 | not-accessible | current | |
| sleRoute6DstAddress OBJECT-TYPE The destination IP6 address of this route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use. | 1.3.6.1.4.1.6296.101.26.5.1.1.1 | InetAddressIPv6 | read-write | current |
| sleRoute6DstMask OBJECT-TYPE Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRoute6DstAddress field. | 1.3.6.1.4.1.6296.101.26.5.1.1.2 | InetAddressPrefixLength (0..65535) | read-write | current |
| sleRoute6Proto OBJECT-TYPE The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. other - not specified local - local interface netmgmt - static route icmp - result of ICMP Redirect egp - Exterior Gateway Protocol ggp - Gateway-Gateway Protocol hello - FuzzBall HelloSpeak rip - Berkeley RIP or RIP-II is-is - Dual IS-IS es-is - ISO 9542 ciscoIgrp - Cisco IGRP bbnSpfIgp - BBN SPF IGP ospf - Open Shortest Path First bgp - Border Gateway Protocol idpr - InterDomain Policy Routing ciscoEigrp - Cisco EIGRP | 1.3.6.1.4.1.6296.101.26.5.1.1.3 | INTEGER {other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isis(9), esis(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16), dhcp(17)} | read-write | current |
| sleRoute6Gateway OBJECT-TYPE The Gateway IP 6 Address. ::0 : indicate invalid | 1.3.6.1.4.1.6296.101.26.5.1.1.4 | InetAddressIPv6 | read-write | current |
| sleRoute6Type OBJECT-TYPE The type of route. Note that the values direct and indirect refer to the notion of direct and indirect routing in the IP architecture. | 1.3.6.1.4.1.6296.101.26.5.1.1.5 | INTEGER {other(1), invalid(2), direct(3), indirect(4)} | read-write | current |
| sleRoute6Subtype OBJECT-TYPE The subtype of this route. | 1.3.6.1.4.1.6296.101.26.5.1.1.6 | INTEGER {unknown(0), ospfIa(1), ospfNssa1(2), ospfNssa2(3), ospfExternal1(4), ospfExternal2(5), isisL1(8), isisL2(9), isisIa(10), bgpMpls(11)} | read-write | current |
| sleRoute6Distance OBJECT-TYPE The Distance value for this route. | 1.3.6.1.4.1.6296.101.26.5.1.1.7 | Integer32 (1..255) | read-write | current |
| sleRoute6Metric OBJECT-TYPE The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's sleRoute6Proto value. If this metric is not used, its value should be set to -1. | 1.3.6.1.4.1.6296.101.26.5.1.1.8 | Integer32 (0..255) | read-write | current |
| sleRoute6Active OBJECT-TYPE The active status for this routing entry. | 1.3.6.1.4.1.6296.101.26.5.1.1.9 | INTEGER {inactive(0), active(1)} | read-write | current |
| sleRoute6NexthopStatus OBJECT-TYPE The nexthop status of this route. | 1.3.6.1.4.1.6296.101.26.5.1.1.10 | Bits {active(0), fib(1), recursive(2)} | read-write | current |
| sleRoute6RibStatus OBJECT-TYPE The rib status for this route. | 1.3.6.1.4.1.6296.101.26.5.1.1.11 | Bits {internal(0), selfroute(1), blackhole(2), nonfib(3), selected(4), changed(5), static(6), stale(7)} | read-write | current |
| sleRoute6BfdState OBJECT-TYPE Static route entry's BFD state. | 1.3.6.1.4.1.6296.101.26.5.1.1.12 | INTEGER {inactive(0), active(1)} | read-write | current |
| sleRoute6Control OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.5.2 | |||
| sleRoute6ControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.1 | INTEGER {createStaticRoute6(1), deleteStaticRoute6(2)} | read-write | current |
| sleRoute6ControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.2 | SleControlStatusType | read-write | current |
| sleRoute6ControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.3 | Gauge32 | read-write | current |
| sleRoute6ControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.4 | TimeTicks | read-write | current |
| sleRoute6ControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.5 | SleControlRequestResultType | read-write | current |
| sleRoute6ControlVRFIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.6 | Integer32 (0..2147483647) | read-write | current |
| sleRoute6ControlDstAddress OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.7 | InetAddressIPv6 | read-write | current |
| sleRoute6ControlDstMask OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.8 | InetAddressPrefixLength | read-write | current |
| sleRoute6ControlGateway OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.9 | InetAddressIPv6 | read-write | current |
| sleRoute6ControlInterface OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.10 | Integer32 (0..11023) | read-write | current |
| sleRoute6ControlDistance OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.2.11 | Integer32 (1..255) | read-write | current |
| sleRoute6Notification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.5.3 | |||
| sleNetworkBase6 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.6 | |||
| sleNetworkBase6Info OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.6.1 | |||
| sleNetwork6DADinterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.1.1 | Integer32 (100..50000) | read-write | current |
| sleNetworkBase6Control OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.6.2 | |||
| sleNetworkBase6ControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.2.1 | INTEGER {setDADInterval(1)} | read-write | current |
| sleNetworkBase6ControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.2.2 | SleControlStatusType | read-write | current |
| sleNetworkBase6ControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.2.3 | Gauge32 | read-write | current |
| sleNetworkBase6ControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.2.4 | TimeTicks | read-write | current |
| sleNetworkBase6ControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.2.5 | SleControlRequestResultType | read-write | current |
| sleNetworkBase6ControlDADinterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.2.6 | Integer32 (100..50000) | read-write | current |
| sleNetworkBase6Notification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.6.3 | |||
| sleIpVRF6 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.7 | |||
| sleIpVRF6SelectionSourceTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.1 | not-accessible | current | |
| sleIpVRF6SelectionSourceEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.1.1 | not-accessible | current | |
| sleIpVRF6SelectionSourceAddr OBJECT-TYPE IP6 Address of selection source | 1.3.6.1.4.1.6296.101.26.7.1.1.1 | InetAddressIPv6 | read-write | current |
| sleIpVRF6SelectionSourceMask OBJECT-TYPE Address mask of selection source | 1.3.6.1.4.1.6296.101.26.7.1.1.2 | InetAddressPrefixLength (0..128) | read-write | current |
| sleIpVRF6SelectionSourceVRFIndex OBJECT-TYPE sleIpVRFIndex in sleIpVRF | 1.3.6.1.4.1.6296.101.26.7.1.1.3 | INTEGER (0..2147483647) | read-write | current |
| sleIpVRF6SelectionSourceControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.7.2 | |||
| sleIpVRF6SelectionSourceControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.2.1 | INTEGER {createVRF6SelectionSource(1), deleteVRF6SelectionSource(2)} | read-write | current |
| sleIpVRF6SelectionSourceControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.2.2 | SleControlStatusType | read-write | current |
| sleIpVRF6SelectionSourceControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.2.3 | Gauge32 | read-write | current |
| sleIpVRF6SelectionSourceControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.2.4 | TimeTicks | read-write | current |
| sleIpVRF6SelectionSourceControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.2.5 | SleControlRequestResultType | read-write | current |
| sleIpVRF6SelectionSourceControlAddr OBJECT-TYPE IP6 Address of selection source | 1.3.6.1.4.1.6296.101.26.7.2.6 | InetAddressIPv6 | read-write | current |
| sleIpVRF6SelectionSourceControlMask OBJECT-TYPE Address mask of selection source | 1.3.6.1.4.1.6296.101.26.7.2.7 | InetAddressPrefixLength | read-write | current |
| sleIpVRF6SelectionSourceControlVRFIndex OBJECT-TYPE sleIpVRFIndex in sleIpVRF | 1.3.6.1.4.1.6296.101.26.7.2.8 | INTEGER (0..2147483647) | read-write | current |
| sleIpVRF6SelectionSourceNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.26.7.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| sleIp6StateChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.3.1 | current |
| sleIfModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.3.2 | current |
| sleAddrAutoConfChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.3.3 | current |
| sleNdProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.3.4 | current |
| sleRouteMapSet NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.3.5 | current |
| sleRouteMapUnset NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.1.3.6 | current |
| sleIdentifierChanged NOTIFICATION-TYPE setIdentifier | 1.3.6.1.4.1.6296.101.26.1.3.7 | current |
| sleIp6MartianFilterChanged NOTIFICATION-TYPE setIp6MartianFilter | 1.3.6.1.4.1.6296.101.26.1.3.8 | current |
| sleIPAddr6Created NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.3.1 | current |
| sleIPAddr6Deleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.3.2 | current |
| sleIPAddr6AllDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.2.3.3 | current |
| sleNdPrefixCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.3.1 | current |
| sleNdPrefixDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.3.3.2 | current |
| sleNeighbour6Created NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.3.1 | current |
| sleNeighbour6Deleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.3.2 | current |
| sleNeighbour6Cleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.4.3.3 | current |
| sleRoute6Created NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.3.1 | current |
| sleRoute6Deleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.5.3.2 | current |
| sleNetworkBase6DADIntervalChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.6.3.1 | current |
| sleIpVRF6SelectionSourceCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.3.1 | current |
| sleIpVRF6SelectionSourceDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.26.7.3.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| sleNetwork6Group OBJECT-GROUP Description. | 1.3.6.1.4.1.6296.101.26.9 | current |
| sleNetwork6NotificationGroup NOTIFICATION-GROUP Description. | 1.3.6.1.4.1.6296.101.26.10 | current |