MIBs Depot

SLE-NETWORK-MIB

Registered at
1.3.6.1.4.1.6296.101.11
Last updated
2004-12-29 14:41
Organization
HANASOFT
Revisions
2004-12-10 16:32
Namespace
dasan
Source file
SLE-NETWORK-MIB
Digest
sha256:36df5aebec9ce17c0ce86c5595d80dc4179a62bf515915d5b0207d1ebeefb04a

Description

This MIB contains all needed informations about DHCP and all supported sle DHCP features.

Imports

FromSymbols
DASAN-SMIsleMgmt
IANAifType-MIBIANAtunnelType
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SLE-TC-MIBSleControlRequestResultType, SleControlStatusType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBITS, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DASAN-SMI
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SLE-NETWORK-MIB
SLE-TC-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
sleNetInterface
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.1
sleNetIfTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.1not-accessiblecurrent
sleNetIfEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.1.1not-accessiblecurrent
sleNetIfIndex
OBJECT-TYPE
Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index
1.3.6.1.4.1.6296.101.11.1.1.1.1Integer32 (0..11023)read-onlycurrent
sleNetIfName
OBJECT-TYPE
Device Name of this Interface.
1.3.6.1.4.1.6296.101.11.1.1.1.2OCTET STRING (SIZE(0..8))read-onlycurrent
sleNetIfDescription
OBJECT-TYPE
Description of this interface.
1.3.6.1.4.1.6296.101.11.1.1.1.3OCTET STRING (SIZE(0..64))read-onlycurrent
sleNetIfTableIndex
OBJECT-TYPE
Same as ifIndex (for appropriated ifTable entries).
1.3.6.1.4.1.6296.101.11.1.1.1.4InterfaceIndexread-onlycurrent
sleNetIfRegState
OBJECT-TYPE
Registered state of Network device.
1.3.6.1.4.1.6296.101.11.1.1.1.5INTEGER {unregistered(0), registered(1)}read-onlycurrent
sleNetIfAdminState
OBJECT-TYPE
Administrative state. down - shutdown up - noshutdown
1.3.6.1.4.1.6296.101.11.1.1.1.6INTEGER {down(0), up(1)}read-onlycurrent
sleNetIfOperState
OBJECT-TYPE
Operational state. down - shutdown or not running up - running
1.3.6.1.4.1.6296.101.11.1.1.1.7INTEGER {down(0), up(1)}read-onlycurrent
sleNetIfMulticast
OBJECT-TYPE
Multicast enable/disable state.
1.3.6.1.4.1.6296.101.11.1.1.1.8INTEGER {disable(0), enable(1)}read-onlycurrent
sleNetIfMtu
OBJECT-TYPE
Maximum Transmission Unit.
1.3.6.1.4.1.6296.101.11.1.1.1.9INTEGER (64..17940)read-onlycurrent
sleNetIfIpSetMode
OBJECT-TYPE
IP address setting mode. 0 : static 1 : dynamic (by DHCP client)
1.3.6.1.4.1.6296.101.11.1.1.1.10INTEGER {static(0), dynamic(1)}read-onlycurrent
sleNetIfIpMartianFilter
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.1.1.11INTEGER {disable(0), enable(1)}read-onlycurrent
sleNetIfUpCnt
OBJECT-TYPE
The times of link-up event.
1.3.6.1.4.1.6296.101.11.1.1.1.12Integer32read-onlycurrent
sleNetIfDownCnt
OBJECT-TYPE
The times of link-down event.
1.3.6.1.4.1.6296.101.11.1.1.1.13Integer32read-onlycurrent
sleNetIfLinkUpTime
OBJECT-TYPE
The elapsed time after link is up.
1.3.6.1.4.1.6296.101.11.1.1.1.14Counter64read-onlycurrent
sleNetIfElapsedTimeAfterClearStats
OBJECT-TYPE
The elapsed time after clearing status.
1.3.6.1.4.1.6296.101.11.1.1.1.15Counter64read-onlycurrent
sleNetIfBindingVRFName
OBJECT-TYPE
VRF name that this tunnel interface is binding.
1.3.6.1.4.1.6296.101.11.1.1.1.16OCTET STRING (SIZE(0..63))read-onlycurrent
sleNetIfOnFailUseVRF
OBJECT-TYPE
Lookup into a global routing table when the VRF routing table lookup was failed.
1.3.6.1.4.1.6296.101.11.1.1.1.17INTEGER {enable(1), disable(2)}read-onlycurrent
sleNetIfIpUnreachability
OBJECT-TYPE
IP unreachability ON/OFF
1.3.6.1.4.1.6296.101.11.1.1.1.18INTEGER {enable(1), disable(2)}read-onlycurrent
sleNetIfipRedirects
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.1.1.19INTEGER {enable(1), disable(2)}read-onlycurrent
sleNetIfIpForwarding
OBJECT-TYPE
The IP forwarding status
1.3.6.1.4.1.6296.101.11.1.1.1.20INTEGER {disable(0), enable(1)}read-onlycurrent
sleNetIfAlias
OBJECT-TYPE
lias Name for the Interface
1.3.6.1.4.1.6296.101.11.1.1.1.21OCTET STRINGread-onlycurrent
sleNetIfIpArpAlias
OBJECT-TYPE
IP Arp Alias state
1.3.6.1.4.1.6296.101.11.1.1.1.22INTEGER {disable(0), enable(1)}read-onlycurrent
sleNetIfIpArpAliasMac
OBJECT-TYPE
IP Arp Alias MAC
1.3.6.1.4.1.6296.101.11.1.1.1.23MacAddressread-onlycurrent
sleNetIfArpMCProbeCount
OBJECT-TYPE
ARP request Multicast probe count
1.3.6.1.4.1.6296.101.11.1.1.1.24Integer32 (2..10)read-onlycurrent
sleNetIfArpUCProbeCount
OBJECT-TYPE
ARP request Unicast probe count
1.3.6.1.4.1.6296.101.11.1.1.1.25Integer32 (2..10)read-onlycurrent
sleNetIfArpRetransTime
OBJECT-TYPE
Retrans time of ARP request (unit: 1s)
1.3.6.1.4.1.6296.101.11.1.1.1.26Integer32 (1..300)read-onlycurrent
sleNetIfIpProxyArp
OBJECT-TYPE
IP Proxy Arp state
1.3.6.1.4.1.6296.101.11.1.1.1.27INTEGER {disable(0), enable(1)}read-onlycurrent
sleNetIfIpRPFilter
OBJECT-TYPE
IP Reverse Path Filtering of CPU
1.3.6.1.4.1.6296.101.11.1.1.1.28INTEGER {disable(0), loose(1), strict(2)}read-onlycurrent
sleNetIfRPFilter
OBJECT-TYPE
Reverse Path Filtering of CHIP (default : looseAllow)
1.3.6.1.4.1.6296.101.11.1.1.1.29INTEGER {disable(0), loose(1), strict(2), looseAllow(3)}read-onlycurrent
sleNetIfRouteMap
OBJECT-TYPE
IP Policy route-map name
1.3.6.1.4.1.6296.101.11.1.1.1.30OCTET STRINGread-onlycurrent
sleNetIfControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.1.2
sleNetIfControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.1.2.1INTEGER {setNetIfRegState(1), setNetIfProfile(2), setNetIfIpMartianFilter(3), setNetIfBindingVRF(4), unsetNetIfBindingVRF(5), setNetIfOnFailUseVRF(6), setNetIfIpUnreachability(7), setNetIfIpRedirects(8), setNetIfIpForwarding(9), setAlias(10), setIpArpAlias(11), setArpMCProbeCount(12), setArpUCProbeCount(13), setArpRetransTime(14), setIpProxyArp(15), setIpRPFilter(16), setRPFilter(17), setRouteMap(18)}read-writecurrent
sleNetIfControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.1.2.2SleControlStatusTyperead-onlycurrent
sleNetIfControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.1.2.3Gauge32read-writecurrent
sleNetIfControlTimeStamp
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.1.2.4SleControlRequestResultTyperead-onlycurrent
sleNetIfControlReqResult
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.1.2.5TimeTicksread-onlycurrent
sleNetIfControlIndex
OBJECT-TYPE
Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index
1.3.6.1.4.1.6296.101.11.1.2.6Integer32 (0..11023)read-writecurrent
sleNetIfControlDescription
OBJECT-TYPE
Description of this interface.
1.3.6.1.4.1.6296.101.11.1.2.7OCTET STRING (SIZE(0..64))read-writecurrent
sleNetIfControlRegState
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.2.8INTEGER {unregister(0), register(1)}read-writecurrent
sleNetIfControlAdminState
OBJECT-TYPE
Administrative state.
1.3.6.1.4.1.6296.101.11.1.2.9INTEGER {down(0), up(1)}read-writecurrent
sleNetIfControlMulticast
OBJECT-TYPE
Multicast enable/disable state.
1.3.6.1.4.1.6296.101.11.1.2.10INTEGER {disable(0), enable(1)}read-writecurrent
sleNetIfControlMtu
OBJECT-TYPE
Maximum Transmission Unit.
1.3.6.1.4.1.6296.101.11.1.2.11INTEGER (64..17940)read-writecurrent
sleNetIfControlIpMartianFilter
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.2.12INTEGER {disable(0), enable(1)}read-writecurrent
sleNetIfControlBindingVRFName
OBJECT-TYPE
VRF name that this tunnel interface is binding.
1.3.6.1.4.1.6296.101.11.1.2.13OCTET STRING (SIZE(0..63))read-writecurrent
sleNetIfControlOnFailUseVRF
OBJECT-TYPE
Lookup into a global routing table when the VRF routing table lookup was failed.
1.3.6.1.4.1.6296.101.11.1.2.14INTEGER {enable(1), disable(2)}read-writecurrent
sleNetIfControlIpUnreachability
OBJECT-TYPE
IP unreachability ON/OFF
1.3.6.1.4.1.6296.101.11.1.2.15INTEGER {enable(1), disable(2)}read-writecurrent
sleNetIfControlIpRedirects
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.2.16INTEGER {enable(1), disable(2)}read-writecurrent
sleNetIfControlIpForwarding
OBJECT-TYPE
The IP forwarding status
1.3.6.1.4.1.6296.101.11.1.2.17INTEGER {disable(0), enable(1)}read-writecurrent
sleNetIfControlAlias
OBJECT-TYPE
Alias Name for the Interface
1.3.6.1.4.1.6296.101.11.1.2.18OCTET STRINGread-writecurrent
sleNetIfControlIpArpAlias
OBJECT-TYPE
IP Arp Alias state
1.3.6.1.4.1.6296.101.11.1.2.19INTEGER {disable(0), enable(1)}read-writecurrent
sleNetIfControlIpArpAliasMac
OBJECT-TYPE
IP Arp Alias MAC
1.3.6.1.4.1.6296.101.11.1.2.20MacAddressread-writecurrent
sleNetIfControlArpMCProbeCount
OBJECT-TYPE
ARP request Multicast probe count
1.3.6.1.4.1.6296.101.11.1.2.21Integer32 (2..10)read-writecurrent
sleNetIfControlArpUCProbeCount
OBJECT-TYPE
ARP request Unicast probe count
1.3.6.1.4.1.6296.101.11.1.2.22Integer32 (2..10)read-writecurrent
sleNetIfControlArpRetransTime
OBJECT-TYPE
Retrans time of ARP request (unit: 1s)
1.3.6.1.4.1.6296.101.11.1.2.23Integer32 (1..300)read-writecurrent
sleNetIfControlIpProxyArp
OBJECT-TYPE
IP Proxy Arp state
1.3.6.1.4.1.6296.101.11.1.2.24INTEGER {disable(0), enable(1)}read-writecurrent
sleNetIfControlIpRPFilter
OBJECT-TYPE
IP Reverse Path Filtering of CPU
1.3.6.1.4.1.6296.101.11.1.2.25INTEGER {disable(0), loose(1), strict(2)}read-writecurrent
sleNetIfControlRPFilter
OBJECT-TYPE
Reverse Path Filtering of CHIP (default : looseAllow)
1.3.6.1.4.1.6296.101.11.1.2.26INTEGER {disable(0), loose(1), strict(2), looseAllow(3)}read-writecurrent
sleNetIfControlRouteMap
OBJECT-TYPE
IP Policy route-map name
1.3.6.1.4.1.6296.101.11.1.2.27OCTET STRINGread-writecurrent
sleNetIfNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.1.3
sleIpAddress
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.2
sleIpAddrTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.2.1not-accessiblecurrent
sleIpAddrEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.2.1.1not-accessiblecurrent
sleIpAddrValue
OBJECT-TYPE
The IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.6296.101.11.2.1.1.1IpAddressread-onlycurrent
sleIpAddrMask
OBJECT-TYPE
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
1.3.6.1.4.1.6296.101.11.2.1.1.2Integer32 (1..32)read-onlycurrent
sleIpAddrBcast
OBJECT-TYPE
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
1.3.6.1.4.1.6296.101.11.2.1.1.3IpAddressread-onlycurrent
sleIpAddrFlag
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.2.1.1.4Bits {permanent(0), tentative(1), deprecated(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), secondary(7)}read-onlycurrent
sleIpAddrScope
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.2.1.1.5INTEGER {global(0), site(200), link(253), host(254), nowhere(255)}read-onlycurrent
sleIpAddrIpIndex
OBJECT-TYPE
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
1.3.6.1.4.1.6296.101.11.2.1.1.6INTEGER (0..1024)read-onlycurrent
sleIpAddrUnnumUsedIp
OBJECT-TYPE
The Check a specific IP address for using interface unnumbered feature.
1.3.6.1.4.1.6296.101.11.2.1.1.7INTEGER {none(0), used(1)}read-onlycurrent
sleIpAddrControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.2.2
sleIpAddrControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.2.2.1INTEGER {createIpAddress(1), destroyIpAddress(2), addIpIndex(3), delIpIndex(4)}read-writecurrent
sleIpAddrControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.2.2.2SleControlStatusTyperead-onlycurrent
sleIpAddrControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.2.2.3Gauge32read-writecurrent
sleIpAddrControlTimeStamp
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.2.2.4SleControlRequestResultTyperead-onlycurrent
sleIpAddrControlReqResult
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.2.2.5TimeTicksread-onlycurrent
sleIpAddrControlNetIfIndex
OBJECT-TYPE
Network interface index 1..4094 : VLAN 10000..11023: Tunnel interface index
1.3.6.1.4.1.6296.101.11.2.2.6Integer32 (1..4094 | 10000..11023)read-writecurrent
sleIpAddrControlValue
OBJECT-TYPE
The IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.6296.101.11.2.2.7IpAddressread-writecurrent
sleIpAddrControlMask
OBJECT-TYPE
The subnet mask associated with the IP address of this entry.
1.3.6.1.4.1.6296.101.11.2.2.8Integer32 (1..32)read-writecurrent
sleIpAddrControlFlag
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.2.2.9INTEGER {primary(0), secondary(1)}read-writecurrent
sleIpAddrControlScope
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.2.2.10INTEGER {global(0), link(253), host(254)}read-writecurrent
sleIpAddrControlIpIndex
OBJECT-TYPE
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
1.3.6.1.4.1.6296.101.11.2.2.11INTEGER (1..1024)read-writecurrent
sleIpAddrNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.2.3
sleArp
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.3
sleArpTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.3.1not-accessiblecurrent
sleArpEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.3.1.1not-accessiblecurrent
sleArpIpAddress
OBJECT-TYPE
The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
1.3.6.1.4.1.6296.101.11.3.1.1.1IpAddressread-onlycurrent
sleArpPhyAddress
OBJECT-TYPE
The media-dependent `physical' address.
1.3.6.1.4.1.6296.101.11.3.1.1.2MacAddressread-onlycurrent
sleArpPortIndex
OBJECT-TYPE
The interface on which this entry's equivalence is effective. 0: for any ports.
1.3.6.1.4.1.6296.101.11.3.1.1.3Integer32 (0..255)read-onlycurrent
sleArpState
OBJECT-TYPE
Arp entry's currently status.
1.3.6.1.4.1.6296.101.11.3.1.1.4INTEGER {static(0), dynamic(1)}read-onlycurrent
sleArpHwType
OBJECT-TYPE
Hardware Type of media.
1.3.6.1.4.1.6296.101.11.3.1.1.5INTEGER {ethernet(1)}read-onlycurrent
sleArpHwUsed
OBJECT-TYPE
Arp entry's currently chip usage state.
1.3.6.1.4.1.6296.101.11.3.1.1.6INTEGER {nonused(0), used(1)}read-onlycurrent
sleArpUsedTime
OBJECT-TYPE
Arp entry's chip used time.(if sleArpState is 0, always 0 and if sleArpHwUsed is 0, always 0.)
1.3.6.1.4.1.6296.101.11.3.1.1.7INTEGER (1..10000000)read-onlycurrent
sleArpControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.3.2
sleArpControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.3.2.1INTEGER {createArpEntry(1), destroyArpEntry(2), clearArpTable(3), clearArpTableByAddr(4)}read-writecurrent
sleArpControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.3.2.2SleControlStatusTyperead-onlycurrent
sleArpControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.3.2.3Gauge32read-writecurrent
sleArpControlTimeStamp
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.3.2.4SleControlRequestResultTyperead-onlycurrent
sleArpControlReqResult
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.3.2.5TimeTicksread-onlycurrent
sleArpControlNetIfIndex
OBJECT-TYPE
Network interface index.
1.3.6.1.4.1.6296.101.11.3.2.6Integer32 (0..4096)read-writecurrent
sleArpControlIpAddress
OBJECT-TYPE
The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
1.3.6.1.4.1.6296.101.11.3.2.7IpAddressread-writecurrent
sleArpControlPhyAddress
OBJECT-TYPE
The media-dependent `physical' address.
1.3.6.1.4.1.6296.101.11.3.2.8MacAddressread-writecurrent
sleArpControlState
OBJECT-TYPE
Arp entry's currently status.
1.3.6.1.4.1.6296.101.11.3.2.9INTEGER {static(0), dynamic(1)}read-writecurrent
sleArpControlMask
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.3.2.10INTEGER (0..32)read-writecurrent
sleArpNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.3.3
sleRoute
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.4
sleRouteTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.4.1not-accessiblecurrent
sleRouteEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.4.1.1not-accessiblecurrent
sleRouteDstAddress
OBJECT-TYPE
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
1.3.6.1.4.1.6296.101.11.4.1.1.1IpAddressread-onlycurrent
sleRouteDstMask
OBJECT-TYPE
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the sleRouteDstMask by determining whether the value of the correspondent sleRouteDstAddress field belong to a class-A, B, or C network. If the value of the sleRouteDstAddress is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
1.3.6.1.4.1.6296.101.11.4.1.1.2INTEGER (0..32)read-onlycurrent
sleRouteGateway
OBJECT-TYPE
The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid
1.3.6.1.4.1.6296.101.11.4.1.1.3IpAddressread-onlycurrent
sleRouteInterface
OBJECT-TYPE
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of sleNetIfIndex. Network interface index 0: invalid 1..4094: VLAN 4095: management 4096: loopback 4097: NULL device 10000..11023: Tunnel interface index
1.3.6.1.4.1.6296.101.11.4.1.1.4INTEGER (0..11023)read-onlycurrent
sleRouteType
OBJECT-TYPE
The type of route. Note that the values direct and indirect refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid has the effect of invalidating the corresponding entry in the sleRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant sleRouteType object.
1.3.6.1.4.1.6296.101.11.4.1.1.5INTEGER {other(1), invalid(2), direct(3), indirect(4)}read-writecurrent
sleRouteProto
OBJECT-TYPE
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
1.3.6.1.4.1.6296.101.11.4.1.1.6INTEGER {other(1), localDirect(2), netmgmtStatic(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16), dhcp(17)}read-onlycurrent
sleRouteMetric
OBJECT-TYPE
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's sleRouteProto value. If this metric is not used, its value should be set to -1.
1.3.6.1.4.1.6296.101.11.4.1.1.7INTEGER (-1..255)read-writecurrent
sleRouteActive
OBJECT-TYPE
The active status for this routing entry.
1.3.6.1.4.1.6296.101.11.4.1.1.8INTEGER {inactive(0), active(1)}read-writecurrent
sleRouteBindingSrcAddr
OBJECT-TYPE
The binding source IP Address for this route.
1.3.6.1.4.1.6296.101.11.4.1.1.9IpAddressread-onlycurrent
sleRouteDistance
OBJECT-TYPE
The Distance value for this route.
1.3.6.1.4.1.6296.101.11.4.1.1.10INTEGER (1..255)read-writecurrent
sleRouteSubtype
OBJECT-TYPE
The subtype of this route.
1.3.6.1.4.1.6296.101.11.4.1.1.11INTEGER {unknown(0), ospfIa(1), ospfNssa1(2), ospfNssa2(3), ospfExternal1(4), ospfExternal2(5), isisL1(8), isisL2(9), isisIa(10), bgpMpls(11)}read-onlycurrent
sleRouteNexthopStatus
OBJECT-TYPE
The nexthop status of this route.
1.3.6.1.4.1.6296.101.11.4.1.1.12Bits {active(0), fib(1), recursive(2)}read-onlycurrent
sleRouteRibStatus
OBJECT-TYPE
The rib status for this route.
1.3.6.1.4.1.6296.101.11.4.1.1.13Bits {internal(0), selfroute(1), blackhole(2), nonfib(3), selected(4), changed(5), static(6), stale(7)}read-onlycurrent
sleRouteVRFIndex
OBJECT-TYPE
VRF index in sleIpVRFTable.
1.3.6.1.4.1.6296.101.11.4.1.1.14Integer32 (0..2147483647)read-onlycurrent
sleRouteControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.4.2
sleRouteControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.4.2.1INTEGER {createStaticRoute(1), destroyStaticRoute(2), setStaticRouteProfile(3)}read-writecurrent
sleRouteControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.4.2.2SleControlStatusTyperead-onlycurrent
sleRouteControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.4.2.3Gauge32read-writecurrent
sleRouteControlTimeStamp
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.4.2.4SleControlRequestResultTyperead-onlycurrent
sleRouteControlReqResult
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.4.2.5TimeTicksread-onlycurrent
sleRouteControlDstAddress
OBJECT-TYPE
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
1.3.6.1.4.1.6296.101.11.4.2.6IpAddressread-writecurrent
sleRouteControlDstMask
OBJECT-TYPE
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the sleRouteDstMask by determining whether the value of the correspondent sleRouteDstAddress field belong to a class-A, B, or C network. If the value of the sleRouteDstAddress is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
1.3.6.1.4.1.6296.101.11.4.2.7INTEGER (0..32)read-writecurrent
sleRouteControlGateway
OBJECT-TYPE
The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid
1.3.6.1.4.1.6296.101.11.4.2.8IpAddressread-writecurrent
sleRouteControlInterface
OBJECT-TYPE
Network interface index 0: invalid 1..4094: VLAN 4095: management 4096: loopback 4097: NULL device 10000..11023: Tunnel interface index To config interface, sleRouteControlGateway have to be removed.
1.3.6.1.4.1.6296.101.11.4.2.9INTEGER (0..11023)read-writecurrent
sleRouteControlBindingSrcAddr
OBJECT-TYPE
The binding source IP Address for this route.
1.3.6.1.4.1.6296.101.11.4.2.10IpAddressread-writecurrent
sleRouteControlDistance
OBJECT-TYPE
The Distance value for this route.
1.3.6.1.4.1.6296.101.11.4.2.11INTEGER (1..255)read-writecurrent
sleRouteControlVRFIndex
OBJECT-TYPE
VRF index in sleIpVRFTable.
1.3.6.1.4.1.6296.101.11.4.2.12Integer32 (0..2147483647)read-writecurrent
sleRouteNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.4.3
sleDhcpClient
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.5
sleDhcpClTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.5.1not-accessiblecurrent
sleDhcpClEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.5.1.1not-accessiblecurrent
sleDhcpClMode
OBJECT-TYPE
DHCP Client activity state in this interface.
1.3.6.1.4.1.6296.101.11.5.1.1.1INTEGER {disable(0), enable(1)}read-onlycurrent
sleDhcpClIpAddr
OBJECT-TYPE
The IP address acquired by DHCP Client active in this interface.
1.3.6.1.4.1.6296.101.11.5.1.1.2IpAddressread-onlycurrent
sleDhcpClNetmask
OBJECT-TYPE
The subnet mask associated with the IP address acquired by DHCP Client. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
1.3.6.1.4.1.6296.101.11.5.1.1.3IpAddressread-onlycurrent
sleDhcpClGateway
OBJECT-TYPE
The Gateway's IP address acquired by DHCP Client active in this interface.
1.3.6.1.4.1.6296.101.11.5.1.1.4IpAddressread-onlycurrent
sleDhcpClDnsServer
OBJECT-TYPE
The DNS server's IP address acquired by DHCP Client active in this interface.
1.3.6.1.4.1.6296.101.11.5.1.1.5IpAddressread-onlycurrent
sleDhcpClServer
OBJECT-TYPE
DHCP Server's IP address.
1.3.6.1.4.1.6296.101.11.5.1.1.6IpAddressread-onlycurrent
sleDhcpClClientId
OBJECT-TYPE
DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address bindings. This value is expected to be unique for all clients in an administrative domain.
1.3.6.1.4.1.6296.101.11.5.1.1.7OCTET STRING (SIZE(0..255))read-onlycurrent
sleDhcpClClientIdStyle
OBJECT-TYPE
DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format
1.3.6.1.4.1.6296.101.11.5.1.1.8INTEGER {ascii(0), hex(1)}read-onlycurrent
sleDhcpClClassId
OBJECT-TYPE
DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a string of n octets, interpreted by servers. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration.
1.3.6.1.4.1.6296.101.11.5.1.1.9OCTET STRING (SIZE(0..256))read-onlycurrent
sleDhcpClClassIdStyle
OBJECT-TYPE
DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format
1.3.6.1.4.1.6296.101.11.5.1.1.10INTEGER {ascii(0), hex(1)}read-onlycurrent
sleDhcpClLeasetime
OBJECT-TYPE
The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s
1.3.6.1.4.1.6296.101.11.5.1.1.11Integer32 (120..2147483637)read-onlycurrent
sleDhcpClState
OBJECT-TYPE
The operating status of DHCP Client.
1.3.6.1.4.1.6296.101.11.5.1.1.12INTEGER {halt(0), init(1), request(3), bound(4), renew(5), rebind(6), nonactive(255)}read-onlycurrent
sleDhcpClControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.5.2
sleDhcpClControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.5.2.1INTEGER {setDhcpClMode(1), setDhcpClProfile(2), changeDhcpClState(3)}read-writecurrent
sleDhcpClControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.5.2.2SleControlStatusTyperead-onlycurrent
sleDhcpClControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.5.2.3Gauge32read-writecurrent
sleDhcpClControlTimeStamp
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.5.2.4SleControlRequestResultTyperead-onlycurrent
sleDhcpClControlReqResult
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.5.2.5TimeTicksread-onlycurrent
sleDhcpClControlNetIfIndex
OBJECT-TYPE
Network Interface Index.
1.3.6.1.4.1.6296.101.11.5.2.6Integer32 (1..4094)read-writecurrent
sleDhcpClControlMode
OBJECT-TYPE
DHCP Client activity state in this interface.
1.3.6.1.4.1.6296.101.11.5.2.7INTEGER {disable(0), enable(1)}read-writecurrent
sleDhcpClControlClientId
OBJECT-TYPE
DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address bindings. This value is expected to be unique for all clients in an administrative domain.
1.3.6.1.4.1.6296.101.11.5.2.8OCTET STRING (SIZE(0..255))read-writecurrent
sleDhcpClControlClientIdStyle
OBJECT-TYPE
DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format
1.3.6.1.4.1.6296.101.11.5.2.9INTEGER {ascii(0), hex(1)}read-writecurrent
sleDhcpClControlClassId
OBJECT-TYPE
DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a string of n octets, interpreted by servers. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration.
1.3.6.1.4.1.6296.101.11.5.2.10OCTET STRING (SIZE(0..255))read-writecurrent
sleDhcpClControlClassIdStyle
OBJECT-TYPE
DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format
1.3.6.1.4.1.6296.101.11.5.2.11INTEGER {ascii(0), hex(1)}read-writecurrent
sleDhcpClControlLeasetime
OBJECT-TYPE
The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s
1.3.6.1.4.1.6296.101.11.5.2.12Integer32 (120..2147483637)read-writecurrent
sleDhcpClControlUpdateIP
OBJECT-TYPE
Update DHCP client operating status. 0 : default 1 : renew 2 : release
1.3.6.1.4.1.6296.101.11.5.2.13INTEGER {remain(0), renew(1), release(2)}read-writecurrent
sleDhcpClNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.5.3
sleV2DhcpClient
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.6
sleNetworkBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.7
sleNetworkBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.7.1
sleNetworkArpAgingTime
OBJECT-TYPE
System Arp Aging Time
1.3.6.1.4.1.6296.101.11.7.1.1INTEGER (10..2147483637)read-onlycurrent
sleNetworkBaseVrfDynamicForwardBinding
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.1.2INTEGER {disable(0), vrrp(1)}read-onlycurrent
sleNetworkBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.7.2
sleNetworkControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.2.1INTEGER {setArpProfile(1), setVrfForwdDynamicStatus(2)}read-writecurrent
sleNetworkControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.2.2SleControlStatusTyperead-onlycurrent
sleNetworkControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.2.3Gauge32read-writecurrent
sleNetworkControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.2.4TimeTicksread-onlycurrent
sleNetworkControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.2.5SleControlRequestResultTyperead-onlycurrent
sleNetworkControlArpAgingTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.2.6INTEGER (10..2147483637)read-writecurrent
sleNetworkControlVrfDynamicForwardBinding
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.2.7INTEGER {disable(0), vrrp(1)}read-writecurrent
sleNetworkBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.7.3
sleTunnel
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.8
sleTunnelIfTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.1not-accessiblecurrent
sleTunnelIfEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.1.1not-accessiblecurrent
sleTunnelIfIndex
OBJECT-TYPE
Tunnel interface index
1.3.6.1.4.1.6296.101.11.8.1.1.1Integer32 (10000..11023)read-onlycurrent
sleTunnelIfLocalAddress
OBJECT-TYPE
The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown.
1.3.6.1.4.1.6296.101.11.8.1.1.2IpAddressread-onlycurrent
sleTunnelIfRemoteAddress
OBJECT-TYPE
The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown.
1.3.6.1.4.1.6296.101.11.8.1.1.3IpAddressread-onlycurrent
sleTunnelIfMode
OBJECT-TYPE
The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal encapsulation l2tp(5) - L2TP encapsulation pptp(6) - PPTP encapsulation l2f(7) - L2F encapsulation udp(8) - UDP encapsulation atmp(9) - ATMP encapsulation msdp(10) - MSDP encapsulation sixToFour(11) - 6to4 encapsulation sixOverFour(12) - 6over4 encapsulation isatap(13) - ISATAP encapsulation teredo(14) - Teredo encapsulation
1.3.6.1.4.1.6296.101.11.8.1.1.4IANAtunnelTyperead-onlycurrent
sleTunnelIfTTL
OBJECT-TYPE
The TTL to use in the outer IP header.
1.3.6.1.4.1.6296.101.11.8.1.1.5Integer32 (1..255)read-onlycurrent
sleTunnelIfDscpMode
OBJECT-TYPE
The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
1.3.6.1.4.1.6296.101.11.8.1.1.6INTEGER {dscpAssign(1), dscpCopyFromPacket(2), dscpMapFromPacket(3)}read-onlycurrent
sleTunnelIfDscp
OBJECT-TYPE
The static DiffServ field value to use in the outer IP header.
1.3.6.1.4.1.6296.101.11.8.1.1.7Integer32 (0..63)read-onlycurrent
sleTunnelIfKeepaliveInterval
OBJECT-TYPE
Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)
1.3.6.1.4.1.6296.101.11.8.1.1.8Integer32 (0..32767)read-onlycurrent
sleTunnelIfKeepaliveRetry
OBJECT-TYPE
Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)
1.3.6.1.4.1.6296.101.11.8.1.1.9Integer32 (1..255)read-onlycurrent
sleTunnelIfPathMtuDiscovery
OBJECT-TYPE
Path mtu discovery on tunnel.
1.3.6.1.4.1.6296.101.11.8.1.1.10INTEGER {enable(1), disable(2)}read-onlycurrent
sleTunnelIfVRFName
OBJECT-TYPE
VPN Routing/Forwarding instance name.
1.3.6.1.4.1.6296.101.11.8.1.1.11OCTET STRING (SIZE(0..63))read-onlycurrent
sleTunnelIfBindingPorts
OBJECT-TYPE
Tunnel binding ports map.
1.3.6.1.4.1.6296.101.11.8.1.1.12OCTET STRINGread-onlycurrent
sleTunnelIfLocalAddress6
OBJECT-TYPE
The address of the local endpoint of the tunnel for IPv6
1.3.6.1.4.1.6296.101.11.8.1.1.13InetAddressread-onlycurrent
sleTunnelIfRemoteAddress6
OBJECT-TYPE
The address of the remote endpoint of the tunnel for IPv6
1.3.6.1.4.1.6296.101.11.8.1.1.14InetAddressread-onlycurrent
sleTunnelIfChecksum
OBJECT-TYPE
A checksum feature for the tunnel.
1.3.6.1.4.1.6296.101.11.8.1.1.15INTEGER {disable(0), enable(1)}read-onlycurrent
sleTunnelIfDmac
OBJECT-TYPE
A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)
1.3.6.1.4.1.6296.101.11.8.1.1.16MacAddressread-onlycurrent
sleTunnelIfTos
OBJECT-TYPE
A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header.
1.3.6.1.4.1.6296.101.11.8.1.1.17INTEGER (0..255)read-onlycurrent
sleTunnelIfControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.8.2
sleTunnelIfControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.8.2.1INTEGER {createTunnelInterface(1), deleteTunnelInterface(2), setTunnelIfLocalAddress(3), setTunnelIfRemoteAddress(4), setTunnelIfMode(5), setTunnelIfTTL(6), setTunnelIfDscp(7), setTunnelIfKeepalive(8), setTunnelIfPathMtuDiscovery(9), setTunnelIfVRFName(10), unsetTunnelIfVRFName(11), setTunnelLocalAddr6(12), setTunnelRemoteAddr6(13), setTunnelChecksum(14), setTunnelDmac(15), setTunnelTos(16)}read-writecurrent
sleTunnelIfControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.8.2.2SleControlStatusTyperead-onlycurrent
sleTunnelIfControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.8.2.3Gauge32read-writecurrent
sleTunnelIfControlTimeStamp
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.8.2.4SleControlRequestResultTyperead-onlycurrent
sleTunnelIfControlReqResult
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.8.2.5TimeTicksread-onlycurrent
sleTunnelIfControlIndex
OBJECT-TYPE
Tunnel interface index
1.3.6.1.4.1.6296.101.11.8.2.6Integer32 (10000..11023)read-writecurrent
sleTunnelIfControlLocalAddress
OBJECT-TYPE
The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown.
1.3.6.1.4.1.6296.101.11.8.2.7IpAddressread-writecurrent
sleTunnelIfControlRemoteAddress
OBJECT-TYPE
The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown.
1.3.6.1.4.1.6296.101.11.8.2.8IpAddressread-writecurrent
sleTunnelIfControlMode
OBJECT-TYPE
The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal encapsulation l2tp(5) - L2TP encapsulation pptp(6) - PPTP encapsulation l2f(7) - L2F encapsulation udp(8) - UDP encapsulation atmp(9) - ATMP encapsulation msdp(10) - MSDP encapsulation sixToFour(11) - 6to4 encapsulation sixOverFour(12) - 6over4 encapsulation isatap(13) - ISATAP encapsulation teredo(14) - Teredo encapsulation
1.3.6.1.4.1.6296.101.11.8.2.9IANAtunnelTyperead-writecurrent
sleTunnelIfControlTTL
OBJECT-TYPE
The TTL to use in the outer IP header.
1.3.6.1.4.1.6296.101.11.8.2.10Integer32 (1..255)read-writecurrent
sleTunneIflControlDscpMode
OBJECT-TYPE
The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
1.3.6.1.4.1.6296.101.11.8.2.11INTEGER {dscpAssign(1), dscpCopyFromPacket(2), dscpMapFromPacket(3)}read-writecurrent
sleTunneIflControlDscp
OBJECT-TYPE
The static DiffServ field value to use in the outer IP header.
1.3.6.1.4.1.6296.101.11.8.2.12Integer32 (0..63)read-writecurrent
sleTunnelIfControlKeepaliveInterval
OBJECT-TYPE
Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)
1.3.6.1.4.1.6296.101.11.8.2.13Integer32 (1..32767)read-writecurrent
sleTunneIflControlKeepaliveRetry
OBJECT-TYPE
Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)
1.3.6.1.4.1.6296.101.11.8.2.14Integer32 (1..255)read-writecurrent
sleTunnelIfControlPathMtuDiscovery
OBJECT-TYPE
Path mtu discovery on tunnel.
1.3.6.1.4.1.6296.101.11.8.2.15INTEGER {enable(1), disable(2)}read-writecurrent
sleTunnelIfControlVRFName
OBJECT-TYPE
VPN Routing/Forwarding instance name.
1.3.6.1.4.1.6296.101.11.8.2.16OCTET STRING (SIZE(0..63))read-writecurrent
sleTunnelIfControlLocalAddress6
OBJECT-TYPE
The address of the local endpoint of the tunnel for IPv6
1.3.6.1.4.1.6296.101.11.8.2.17InetAddressread-writecurrent
sleTunnelIfControlRemoteAddress6
OBJECT-TYPE
The address of the remote endpoint of the tunnel for IPv6
1.3.6.1.4.1.6296.101.11.8.2.18InetAddressread-writecurrent
sleTunnelIfControlChecksum
OBJECT-TYPE
A checksum feature for the tunnel.
1.3.6.1.4.1.6296.101.11.8.2.19INTEGER {disable(0), enable(1)}read-writecurrent
sleTunnelIfControlDmac
OBJECT-TYPE
A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)
1.3.6.1.4.1.6296.101.11.8.2.20MacAddressread-writecurrent
sleTunnelIfControlTos
OBJECT-TYPE
A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header.
1.3.6.1.4.1.6296.101.11.8.2.21INTEGER (0..255)read-writecurrent
sleTunnelIfNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.8.3
sleTunnelAddressTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.4not-accessiblecurrent
sleTunnelAddressEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.4.1not-accessiblecurrent
sleTunnelAddressValue
OBJECT-TYPE
The IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.6296.101.11.8.4.1.1IpAddressread-onlycurrent
sleTunnelAddressMask
OBJECT-TYPE
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
1.3.6.1.4.1.6296.101.11.8.4.1.2Integer32 (1..128)read-onlycurrent
sleTunnelIpAddrBcast
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.4.1.3IpAddressread-onlycurrent
sleTunnelAddressFlag
OBJECT-TYPE
dynamic: ~ permanent primary : ~ secondary anycast: this bit is available for ipv6 only. The others are available for ipv4 only.
1.3.6.1.4.1.6296.101.11.8.4.1.4Bits {permanent(0), tentative(1), deprecated(2), anycast(3), reserved1(4), reserved2(5), reserved3(6), secondary(7)}read-onlycurrent
sleTunnelAddressScope
OBJECT-TYPE
default : global In linux, 200 - site 0 - global 1..252 - scopeNUM 253 - link 254 - host 255 - nowhere
1.3.6.1.4.1.6296.101.11.8.4.1.5Integer32 (0..255)read-onlycurrent
sleTunnelAddressUnnumIfIndex
OBJECT-TYPE
The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200)
1.3.6.1.4.1.6296.101.11.8.4.1.6INTEGER (1..4094)read-onlycurrent
sleTunnelAddressUnnumIpIndex
OBJECT-TYPE
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
1.3.6.1.4.1.6296.101.11.8.4.1.7INTEGER (0 | 2..1024)read-onlycurrent
sleTunnelAddressControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.8.5
sleTunnelAddressControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.8.5.1INTEGER {createTunnelIpAddress(1), destroyTunnelIpAddress(2), setIfUnnumbered(3), delIfUnnumbered(4)}read-writecurrent
sleTunnelAddressControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.8.5.2SleControlStatusTyperead-onlycurrent
sleTunnelAddressControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.8.5.3Gauge32read-writecurrent
sleTunnelAddressControlTimeStamp
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.8.5.4SleControlRequestResultTyperead-onlycurrent
sleTunnelAddressControlReqResult
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.8.5.5TimeTicksread-onlycurrent
sleTunnelAddressControlTunnelIfIndex
OBJECT-TYPE
Tunnel interface index
1.3.6.1.4.1.6296.101.11.8.5.6Integer32 (10000..11023)read-writecurrent
sleTunnelAddressControlValue
OBJECT-TYPE
The IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.6296.101.11.8.5.7IpAddressread-writecurrent
sleTunnelAddressControlMask
OBJECT-TYPE
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
1.3.6.1.4.1.6296.101.11.8.5.8Integer32 (1..128)read-writecurrent
sleTunnelAddressControlFlag
OBJECT-TYPE
default : primary
1.3.6.1.4.1.6296.101.11.8.5.9INTEGER {primary(1), secondary(2), anycast(3), unicast(4)}read-writecurrent
sleTunnelAddressControlScope
OBJECT-TYPE
default : global not applicable : nowhere
1.3.6.1.4.1.6296.101.11.8.5.10INTEGER {global(0), link(253), host(254)}read-writecurrent
sleTunnelAddressControlUnnumIfIndex
OBJECT-TYPE
The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200)
1.3.6.1.4.1.6296.101.11.8.5.11INTEGER (1..4094)read-writecurrent
sleTunnelAddressControlUnnumIpIndex
OBJECT-TYPE
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
1.3.6.1.4.1.6296.101.11.8.5.12INTEGER (0 | 2..1024)read-writecurrent
sleTunnelAddressNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.8.6
sleIpVRF
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.9
sleIpVRFTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.1not-accessiblecurrent
sleIpVRFEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.1.1not-accessiblecurrent
sleIpVRFIndex
OBJECT-TYPE
VRF index.
1.3.6.1.4.1.6296.101.11.9.1.1.1Integer32 (0..2147483647)read-onlycurrent
sleIpVRFName
OBJECT-TYPE
VRF name.
1.3.6.1.4.1.6296.101.11.9.1.1.2OCTET STRING (SIZE(0..63))read-onlycurrent
sleIpVRFDesignatedPorts
OBJECT-TYPE
The port map of VRF designated-port.
1.3.6.1.4.1.6296.101.11.9.1.1.3OCTET STRINGread-onlycurrent
sleIpVRFRouterId
OBJECT-TYPE
Router-Identifier
1.3.6.1.4.1.6296.101.11.9.1.1.4IpAddressread-onlycurrent
sleIpVRFDescription
OBJECT-TYPE
The description of VRF.
1.3.6.1.4.1.6296.101.11.9.1.1.5OCTET STRING (SIZE(0..128))read-onlycurrent
sleIpVRFControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.9.2
sleIpVRFControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.9.2.1INTEGER {createIpVRF(1), deleteIpVRF(2), setIpVRFDesignatedPorts(3), unsetIpVRFDesignatedPorts(4), setVRFRouterId(5), setVRFDescription(6)}read-writecurrent
sleIpVRFControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.9.2.2SleControlStatusTyperead-onlycurrent
sleIpVRFControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.9.2.3Gauge32read-writecurrent
sleIpVRFControlTimeStamp
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.9.2.4SleControlRequestResultTyperead-onlycurrent
sleIpVRFControlReqResult
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.9.2.5TimeTicksread-onlycurrent
sleIpVRFControlName
OBJECT-TYPE
VRF name
1.3.6.1.4.1.6296.101.11.9.2.6OCTET STRING (SIZE(0..63))read-writecurrent
sleIpVRFControlDesignatedPorts
OBJECT-TYPE
The port map of VRF designated-port.
1.3.6.1.4.1.6296.101.11.9.2.7OCTET STRINGread-writecurrent
sleIpVRFControlRouterId
OBJECT-TYPE
Router-Identifier
1.3.6.1.4.1.6296.101.11.9.2.8IpAddressread-writecurrent
sleIpVRFControlDescription
OBJECT-TYPE
The description of VRF.
1.3.6.1.4.1.6296.101.11.9.2.9OCTET STRING (SIZE(0..128))read-writecurrent
sleIpVRFNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.9.3
sleIpVRFSelectionSourceTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.4not-accessiblecurrent
sleIpVRFSelectionSourceEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.4.1not-accessiblecurrent
sleIpVRFSelectionSrcIndex
OBJECT-TYPE
VRF selection source index.
1.3.6.1.4.1.6296.101.11.9.4.1.1INTEGER (1..1024)read-onlycurrent
sleIpVRFSelectionSrcAddr
OBJECT-TYPE
VRF selection by source IP address.
1.3.6.1.4.1.6296.101.11.9.4.1.2IpAddressread-onlycurrent
sleIpVRFSelectionSrcMask
OBJECT-TYPE
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
1.3.6.1.4.1.6296.101.11.9.4.1.3Integer32 (1..32)read-onlycurrent
sleIpVRFSelectionSrcVRFName
OBJECT-TYPE
VPN Routing/Forwarding instance name.
1.3.6.1.4.1.6296.101.11.9.4.1.4OCTET STRING (SIZE(0..63))read-onlycurrent
sleIpVRFSelectionSourceControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.9.5
sleIpVRFSelectionSrcControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.11.9.5.1INTEGER {setVRFSelectionSource(1), unsetVRFSelectionSource(2)}read-writecurrent
sleIpVRFSelectionSrcControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.11.9.5.2SleControlStatusTyperead-onlycurrent
sleIpVRFSelectionSrcControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.9.5.3Gauge32read-writecurrent
sleIpVRFSelectionSrcControlTimeStamp
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.9.5.4SleControlRequestResultTyperead-onlycurrent
sleIpVRFSelectionSrcControlReqResult
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.11.9.5.5TimeTicksread-onlycurrent
sleIpVRFSelectionSrcControlAddr
OBJECT-TYPE
VRF selection by source IP address.
1.3.6.1.4.1.6296.101.11.9.5.6IpAddressread-writecurrent
sleIpVRFSelectionSrcControlMask
OBJECT-TYPE
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
1.3.6.1.4.1.6296.101.11.9.5.7Integer32 (1..32)read-writecurrent
sleIpVRFSelectionSrcControlVRFName
OBJECT-TYPE
VPN Routing/Forwarding instance name.
1.3.6.1.4.1.6296.101.11.9.5.8OCTET STRING (SIZE(0..63))read-writecurrent
sleIpVRFSelectionSourceNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.9.6
sleBFD
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10
sleBFDBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.1
sleBFDBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.1.1
sleBFDEnable
OBJECT-TYPE
BFD fast-detect is enabled or disabled.
1.3.6.1.4.1.6296.101.11.10.1.1.1INTEGER {disable(0), enable(1)}read-onlycurrent
sleBFDEchoEnable
OBJECT-TYPE
BFD Echo function is enabled or disabled.
1.3.6.1.4.1.6296.101.11.10.1.1.2INTEGER {disable(0), enable(1)}read-onlycurrent
sleBFDSlowTimer
OBJECT-TYPE
BFD Slow Timer in unit of milliseconds default: 1000(ms)
1.3.6.1.4.1.6296.101.11.10.1.1.3INTEGER (1000..30000)read-onlycurrent
sleBFDBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.1.2
sleBFDControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.11.10.1.2.1INTEGER {setBFDBaseProfile(1)}read-writecurrent
sleBFDControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.11.10.1.2.2SleControlStatusTyperead-onlycurrent
sleBFDControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.10.1.2.3Gauge32read-writecurrent
sleBFDControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.11.10.1.2.4TimeTicksread-onlycurrent
sleBFDControlReqResult
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.10.1.2.5SleControlRequestResultTyperead-onlycurrent
sleBFDControlEnable
OBJECT-TYPE
BFD fast-detect is enabled or disabled.
1.3.6.1.4.1.6296.101.11.10.1.2.6INTEGER {disable(0), enable(1)}read-writecurrent
sleBFDControlEchoEnable
OBJECT-TYPE
BFD Echo function is enabled or disabled.
1.3.6.1.4.1.6296.101.11.10.1.2.7INTEGER {disable(0), enable(1)}read-writecurrent
sleBFDControlSlowTimer
OBJECT-TYPE
BFD Slow Timer in unit of milliseconds default: 1000(ms)
1.3.6.1.4.1.6296.101.11.10.1.2.8INTEGER (1000..30000)read-writecurrent
sleBFDBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.1.3
sleBFDInterface
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.2
sleBFDInterfaceTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.2.1not-accessiblecurrent
sleBFDInterfaceEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.2.1.1not-accessiblecurrent
sleBFDIfRxInterval
OBJECT-TYPE
Required Min Rx Interval of BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.1.1.1INTEGER (50..10000)read-onlycurrent
sleBFDIfTxInterval
OBJECT-TYPE
Required Min Tx Interval of BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.1.1.2INTEGER (50..10000)read-onlycurrent
sleBFDIfDetectMulti
OBJECT-TYPE
Detect Multi value of BFD control packet in this interface. default: 3
1.3.6.1.4.1.6296.101.11.10.2.1.1.3INTEGER (3..255)read-onlycurrent
sleBFDIfRxIntervalIPv6
OBJECT-TYPE
Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.1.1.4Integer32 (50..1000)read-onlycurrent
sleBFDIfTxIntervalIJPv6
OBJECT-TYPE
Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.1.1.5Integer32 (50..1000)read-onlycurrent
sleBFDIfDetectMultiIPv6
OBJECT-TYPE
Detect Multi value of IPv6 BFD control packet in this interface. default: 3
1.3.6.1.4.1.6296.101.11.10.2.1.1.6Integer32 (3..50)read-onlycurrent
sleBFDInterfaceControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.2.2
sleBFDIfControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.11.10.2.2.1INTEGER {setBFDIfProfile(1)}read-writecurrent
sleBFDIfControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.11.10.2.2.2SleControlStatusTyperead-onlycurrent
sleBFDIfControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.11.10.2.2.3Gauge32read-writecurrent
sleBFDIfControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.11.10.2.2.4TimeTicksread-onlycurrent
sleBFDIfControlReqResult
OBJECT-TYPE
The result of the last user command.
1.3.6.1.4.1.6296.101.11.10.2.2.5SleControlRequestResultTyperead-onlycurrent
sleBFDIfControlNetIfIndex
OBJECT-TYPE
BFD Interface Index.
1.3.6.1.4.1.6296.101.11.10.2.2.6Integer32 (0..4097)read-writecurrent
sleBFDIfControlRxInterval
OBJECT-TYPE
Required Min Rx Interval of BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.2.7INTEGER (50..10000)read-writecurrent
sleBFDIfControlTxInterval
OBJECT-TYPE
Required Min Tx Interval of BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.2.8INTEGER (50..10000)read-writecurrent
sleBFDIfControlDetectMulti
OBJECT-TYPE
Detect Multi value of BFD control packet in this interface. default: 3
1.3.6.1.4.1.6296.101.11.10.2.2.9INTEGER (3..255)read-writecurrent
sleBFDIfControlRxIntervalIPv6
OBJECT-TYPE
Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.2.10Integer32 (50..1000)read-writecurrent
sleBFDIfControlTxIntervalIPv6
OBJECT-TYPE
Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
1.3.6.1.4.1.6296.101.11.10.2.2.11Integer32 (50..1000)read-writecurrent
sleBFDIfControlDetectMultiIPv6
OBJECT-TYPE
Detect Multi value of IPv6 BFD control packet in this interface. default: 3
1.3.6.1.4.1.6296.101.11.10.2.2.12Integer32 (3..50)read-writecurrent
sleBFDInterfaceNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.2.3
sleBFDSession
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.3
sleBFDSessionInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.3.1
sleBFDSessionInfoTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.1.1not-accessiblecurrent
sleBFDSessionInfoEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.1.1.1not-accessiblecurrent
sleBFDSessionNeighAddrType
OBJECT-TYPE
Type of Neighbor Address referred to this session
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.1InetAddressTyperead-onlycurrent
sleBFDSessionNeighAddrValue
OBJECT-TYPE
Value of Neighbor Address referred to this session.
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.2InetAddressread-onlycurrent
sleBFDSessionRegProtocols
OBJECT-TYPE
Value of Neighbor Address referred to this session.
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.3Bits {ospfv2(0), ospfv3(1), vrrp4(2), vrrp6(3), staticroute4(4), staticroute6(5), bgp(6)}read-onlycurrent
sleBFDSessionLocalDiscr
OBJECT-TYPE
Discriminator of this session.
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.4Unsigned32read-onlycurrent
sleBFDSessionRemoteDiscr
OBJECT-TYPE
Discriminator of remote session neighboring this session.
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.5Unsigned32read-onlycurrent
sleBFDSessionDetecMultiplier
OBJECT-TYPE
Detect Multiplier value which this session used. default: 3
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.6INTEGER (1..63)read-onlycurrent
sleBFDSessionStatus
OBJECT-TYPE
Status of this session. AdminDown(0) is same as disabled(4).
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.7INTEGER {adminDown(0), down(1), init(2), up(3), disabled(4)}read-onlycurrent
sleBFDSessionEchoUsage
OBJECT-TYPE
Determine whether this session use or not echo function.
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.8INTEGER {notUsing(0), using(1)}read-onlycurrent
sleBFDSessionUptime
OBJECT-TYPE
The time since this session's status changed into 'Up'.
1.3.6.1.4.1.6296.101.11.10.3.1.1.1.9TimeTicksread-onlycurrent
sleBFDSessionStats
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.3.2
sleBFDSessionStatsTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.2.1not-accessiblecurrent
sleBFDSessionStatsEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1not-accessiblecurrent
sleBFDSessionStatsHolddownTime
OBJECT-TYPE
Type of Neighbor Address referred to this session.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.1Unsigned32read-onlycurrent
sleBFDSessionStatsHolddownExpires
OBJECT-TYPE
The time remaining before this entry change into down status without receiving hello in unit of milliseconds.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.2Unsigned32read-onlycurrent
sleBFDSessionStatsHolddownHitCount
OBJECT-TYPE
Hit Count whose this session status chang into down.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.3Unsigned32read-onlycurrent
sleBFDSessionStatsHelloTime
OBJECT-TYPE
The time is when it expects next hello, after receiving that in unit of milliseconds.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.4Unsigned32read-onlycurrent
sleBFDSessionStatsHelloHitCount
OBJECT-TYPE
Hit Count whose this session received.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.5Unsigned32read-onlycurrent
sleBFDSessionStatsRxCount
OBJECT-TYPE
Hit Count whose this session received control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.6Unsigned32read-onlycurrent
sleBFDSessionStatsRxAvgInterval
OBJECT-TYPE
Average interval whose this session received control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.7Unsigned32read-onlycurrent
sleBFDSessionStatsRxMinInterval
OBJECT-TYPE
Minimum interval whose this session received control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.8Unsigned32read-onlycurrent
sleBFDSessionStatsRxMaxInterval
OBJECT-TYPE
Maximum interval whose this session received control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.9Unsigned32read-onlycurrent
sleBFDSessionStatsTxCount
OBJECT-TYPE
Hit Count whose this session send control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.10Unsigned32read-onlycurrent
sleBFDSessionStatsTxAvgInterval
OBJECT-TYPE
Average interval whose this session sent control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.11Unsigned32read-onlycurrent
sleBFDSessionStatsTxMinInterval
OBJECT-TYPE
Minimum interval whose this session sent control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.12Unsigned32read-onlycurrent
sleBFDSessionStatsTxMaxInterval
OBJECT-TYPE
Maximum interval whose this session received control packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.13Unsigned32read-onlycurrent
sleBFDSessionStatsEchoRxCount
OBJECT-TYPE
Hit Count whose this session received echo packet
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.14Unsigned32read-onlycurrent
sleBFDSessionStatsEchoRxAvgInterval
OBJECT-TYPE
Average interval whose this session received echo packet
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.15Unsigned32read-onlycurrent
sleBFDSessionStatsEchoRxMinInterval
OBJECT-TYPE
Minimum interval whose this session received echo packet
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.16Unsigned32read-onlycurrent
sleBFDSessionStatsEchoRxMaxInterval
OBJECT-TYPE
Maximum interval whose this session received echo packet
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.17Unsigned32read-onlycurrent
sleBFDSessionStatsEchoTxCount
OBJECT-TYPE
Hit Count whose this session send echo packet
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.18Unsigned32read-onlycurrent
sleBFDSessionStatsEchoTxAvgInterval
OBJECT-TYPE
Average interval whose this session sent echo packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.19Unsigned32read-onlycurrent
sleBFDSessionStatsEchoTxMinInterva
OBJECT-TYPE
Minimum interval whose this session sent echo packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.20Unsigned32read-onlycurrent
sleBFDSessionStatsEchoTxMaxInterval
OBJECT-TYPE
Maximum interval whose this session received echo packet.
1.3.6.1.4.1.6296.101.11.10.3.2.1.1.21Unsigned32read-onlycurrent
sleBFDSessionLocal
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.3.3
sleBFDSessionLocalTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.3.1not-accessiblecurrent
sleBFDSessionLocalEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.3.1.1not-accessiblecurrent
sleBFDSessionLocalDiag
OBJECT-TYPE
Value of State field of this session's control packet.
1.3.6.1.4.1.6296.101.11.10.3.3.1.1.1INTEGER {noDiag(0), detectExpired(1), echoFailed(2), neighDownAlarm(3), fwdPlaneReset(4), pathDown(5), concatPathDown(6), adminDown(7), reverseConcatDown(8), reserved(9)}read-onlycurrent
sleBFDSessionLocalState
OBJECT-TYPE
Value of Diag field of this session's control packet
1.3.6.1.4.1.6296.101.11.10.3.3.1.1.2INTEGER {adminDown(0), donw(1), init(2), up(3)}read-onlycurrent
sleBFDSessionLocalFlags
OBJECT-TYPE
Value of Flags field of this session's control packet.
1.3.6.1.4.1.6296.101.11.10.3.3.1.1.3Bits {poll(0), final(1), controlIndependent(2), authPresent(3), demand(4), multipoint(5)}read-onlycurrent
sleBFDSessionLocalMultiplier
OBJECT-TYPE
Value of MinTxInterval field of this session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.3.1.1.4INTEGER (1..63)read-onlycurrent
sleBFDSessionLocalMinTxInterval
OBJECT-TYPE
Value of MinTxInterval field of this session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.3.1.1.5Unsigned32read-onlycurrent
sleBFDSessionLocalMinRxInterval
OBJECT-TYPE
Value of MinRxInterval field of this session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.3.1.1.6Unsigned32read-onlycurrent
sleBFDSessionLocalMinEchoInterval
OBJECT-TYPE
Value of MinEchoInterval field of this session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.3.1.1.7Unsigned32read-onlycurrent
sleBFDSessionRemote
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.3.4
sleBFDSessionRemoteTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.4.1not-accessiblecurrent
sleBFDSessionRemoteEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.3.4.1.1not-accessiblecurrent
sleBFDSessionRemoteDiag
OBJECT-TYPE
Value of State field of remote session's control packet.
1.3.6.1.4.1.6296.101.11.10.3.4.1.1.1INTEGER {noDiag(0), detectExpired(1), echoFailed(2), neighDownAlarm(3), fwdPlaneReset(4), pathDown(5), concatPathDown(6), adminDown(7), reverseConcatDown(8), reserved(9)}read-onlycurrent
sleBFDSessionRemoteState
OBJECT-TYPE
Value of Diag field of remote session's control packet
1.3.6.1.4.1.6296.101.11.10.3.4.1.1.2INTEGER {adminDown(0), donw(1), init(2), up(3)}read-onlycurrent
sleBFDSessionremoteFlags
OBJECT-TYPE
Value of Flags field of remote session's control packet.
1.3.6.1.4.1.6296.101.11.10.3.4.1.1.3Bits {poll(0), final(1), controlIndependent(2), authPresent(3), demand(4), multipoint(5)}read-onlycurrent
sleBFDSessionRemoteMultiplier
OBJECT-TYPE
Value of MinTxInterval field of this session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.4.1.1.4INTEGER (1..63)read-onlycurrent
sleBFDSessionRemoteMinTxInterval
OBJECT-TYPE
Value of MinTxInterval field of remote session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.4.1.1.5Unsigned32read-onlycurrent
sleBFDSessionRemoteMinRxInterval
OBJECT-TYPE
Value of MinRxInterval field of remote session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.4.1.1.6Unsigned32read-onlycurrent
sleBFDSessionRemoteMinEchoInterval
OBJECT-TYPE
Value of MinEchoInterval field of remote session's control packet in unit of microseconds.
1.3.6.1.4.1.6296.101.11.10.3.4.1.1.7Unsigned32read-onlycurrent
sleBFDStaticGw
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.4
sleBFDStaticGwTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.1not-accessiblecurrent
sleBFDStaticGwEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.1.1not-accessiblecurrent
sleBFDStaticGwAddrType
OBJECT-TYPE
The BFD static Gateway address type. Only ipv4(1).
1.3.6.1.4.1.6296.101.11.10.4.1.1.1InetAddressTyperead-writecurrent
sleBFDStaticGwAddr
OBJECT-TYPE
The BFD static Gateway address. 4bytes
1.3.6.1.4.1.6296.101.11.10.4.1.1.2InetAddressread-writecurrent
sleBFDStaticGwControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.4.2
sleBFDStaticGwControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.1INTEGER {addBfdStaticGw(1), delBfdStaticGw(2)}read-writecurrent
sleBFDStaticGwControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.2SleControlStatusTyperead-onlycurrent
sleBFDStaticGwControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.3Gauge32read-writecurrent
sleBFDStaticGwControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.4TimeTicksread-onlycurrent
sleBFDStaticGwControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.5SleControlRequestResultTyperead-onlycurrent
sleBFDStaticGwControlNetIfIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.6Integer32read-writecurrent
sleBFDStaticGwControlGwAddrType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.7InetAddressTyperead-writecurrent
sleBFDStaticGwControlGwAddr
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.2.8InetAddressread-writecurrent
sleBFDStaticGwNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.11.10.4.3

Notifications

NameOIDStatus
sleNetIfRegStateChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.3.1current
sleNetIfProfileChanged
NOTIFICATION-TYPE
setNetIfProfile.
1.3.6.1.4.1.6296.101.11.1.3.2current
sleNetIfIpMartianFilterChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.3.3current
sleNetIfBindingVRFSet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.3.4current
sleNetIfBindingVRFUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.3.5current
sleNetIfIpOnFailUseVRFChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.3.6current
sleNetIfIpUnreachabilityChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.3.7current
sleNetIfIpRedirectsChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.1.3.8current
sleNetIfIpForwardingChanged
NOTIFICATION-TYPE
setNetIfIpForwarding
1.3.6.1.4.1.6296.101.11.1.3.9current
sleNetIfAliasChanged
NOTIFICATION-TYPE
setAlias
1.3.6.1.4.1.6296.101.11.1.3.10current
sleNetIfIpArpAliasChanged
NOTIFICATION-TYPE
setIpArpAlias
1.3.6.1.4.1.6296.101.11.1.3.11current
sleNetIfArpMCProbeCountChanged
NOTIFICATION-TYPE
setArpMCProbeCount
1.3.6.1.4.1.6296.101.11.1.3.12current
sleNetIfArpUCProbeCountChanged
NOTIFICATION-TYPE
setArpUCProbeCount
1.3.6.1.4.1.6296.101.11.1.3.13current
sleNetIfArpRetransTimeChanged
NOTIFICATION-TYPE
setArpRetransTime
1.3.6.1.4.1.6296.101.11.1.3.14current
sleNetIfIpProxyArpChanged
NOTIFICATION-TYPE
setIpProxyArp
1.3.6.1.4.1.6296.101.11.1.3.15current
sleNetIfIpRPFilterChanged
NOTIFICATION-TYPE
setIpRPFilter
1.3.6.1.4.1.6296.101.11.1.3.16current
sleNetIfRPFilterChanged
NOTIFICATION-TYPE
setRPFilter
1.3.6.1.4.1.6296.101.11.1.3.17current
sleNetIfRouteMapChanged
NOTIFICATION-TYPE
setRouteMap
1.3.6.1.4.1.6296.101.11.1.3.18current
sleIpAddressCreated
NOTIFICATION-TYPE
createIpAddress.
1.3.6.1.4.1.6296.101.11.2.3.1current
sleIpAddressDestroyed
NOTIFICATION-TYPE
destroyIpAddress.
1.3.6.1.4.1.6296.101.11.2.3.2current
sleIpAddressIpIndexAdded
NOTIFICATION-TYPE
addIpIndex
1.3.6.1.4.1.6296.101.11.2.3.3current
sleIpAddressIpIndexDeleted
NOTIFICATION-TYPE
delIpIndex
1.3.6.1.4.1.6296.101.11.2.3.4current
sleArpEntryCreated
NOTIFICATION-TYPE
createArpEntry.
1.3.6.1.4.1.6296.101.11.3.3.1current
sleArpEntryDestroyed
NOTIFICATION-TYPE
destroyArpEntry.
1.3.6.1.4.1.6296.101.11.3.3.2current
sleArpTableCleared
NOTIFICATION-TYPE
clearArpTable. In this notification PDU, key of sleArpState is ifindex.0.0.0.0.
1.3.6.1.4.1.6296.101.11.3.3.3current
sleArpTableClearedByAddr
NOTIFICATION-TYPE
clearArpTableByAddr
1.3.6.1.4.1.6296.101.11.3.3.4current
sleRouteStaticCreated
NOTIFICATION-TYPE
createStaticRoute
1.3.6.1.4.1.6296.101.11.4.3.1current
sleRouteStaticDestroyed
NOTIFICATION-TYPE
destroyStaticRoute
1.3.6.1.4.1.6296.101.11.4.3.2current
sleRouteStaticProfileChanged
NOTIFICATION-TYPE
setStaticRouteProfile
1.3.6.1.4.1.6296.101.11.4.3.3current
sleDhcpClModeChanged
NOTIFICATION-TYPE
setDhcpClMode.
1.3.6.1.4.1.6296.101.11.5.3.1current
sleDhcpClProfileChanged
NOTIFICATION-TYPE
setDhcpClProfile.
1.3.6.1.4.1.6296.101.11.5.3.2current
sleDhcpClStateChanged
NOTIFICATION-TYPE
ChangeDhcpClState.
1.3.6.1.4.1.6296.101.11.5.3.3current
sleNetworkArpProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.7.3.1current
sleTunnelIfCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.1current
sleTunnelIfDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.2current
sleTunnelIfLocalAddressChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.3current
sleTunnelIfRemoteAddressChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.4current
sleTunnelIfModeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.5current
sleTunnelIfTTLChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.6current
sleTunnelIfDscpChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.7current
sleTunnelIfKeepaliveChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.8current
sleTunnelIfPathMtuDiscoveryChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.9current
sleTunnelIfVRFNameSet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.10current
sleTunnelIfVRFNameUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.3.11current
sleTunnelIfLocalAddress6Changed
NOTIFICATION-TYPE
setTunnelLocalAddr6
1.3.6.1.4.1.6296.101.11.8.3.12current
sleTunnelIfRemoteAddress6Changed
NOTIFICATION-TYPE
setTunnelRemoteAddr6
1.3.6.1.4.1.6296.101.11.8.3.13current
sleTunnelAddressCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.6.1current
sleTunnelAddressDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.8.6.2current
sleTunnelAddressUnnumChanged
NOTIFICATION-TYPE
setIfUnnumbered
1.3.6.1.4.1.6296.101.11.8.6.3current
sleTunnelAddressUnnumDeleted
NOTIFICATION-TYPE
delIfUnnumbered
1.3.6.1.4.1.6296.101.11.8.6.4current
sleIpVRFCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.3.1current
sleIpVRFDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.3.2current
sleIpVRFDesignatedPortsSet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.3.3current
sleIpVRFDesignatedPortsUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.3.4current
sleIpVRFRouterIdChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.3.5current
sleIpVRFDescriptionChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.3.6current
sleIpVRFSelectionSrcSet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.6.1current
sleIpVRFSelectionSrcUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.9.6.2current
sleBFDBaseProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.1.3.1current
sleBFDIfProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.2.3.1current
sleBFDStaticGwAdded
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.3.1current
sleBFDStaticGwDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.11.10.4.3.2current

Conformance

NameOIDStatus
sleNetworkGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.6296.101.11.14current
sleNetworkNotificationGroup
NOTIFICATION-GROUP
Description.
1.3.6.1.4.1.6296.101.11.15current