SL-MAIN-MIB
- Registered at
- 1.3.6.1.4.1.4515.1.3
- Last updated
- 2000-08-28 00:00
- Organization
- PacketLight Networks Ltd.
- Namespace
- packetlight
- Source file
SL-MAIN-MIB- Digest
sha256:4a88420175de668e4d1275adf21d51db883e100f742fa75bff198512e93152e6
Description
This MIB module describes the Main Board
Contact
Omri_Viner@PacketLight.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TimeTicks, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
13 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PerfHist-TC-MIB SL-MAIN-MIB SL-NE-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.3.6 | slmEntity | SL-ENTITY-MIB |
| 1.3.6.1.4.1.4515.1.3.10 | slL2Topology | SL-L2TOPOLOGY-MIB |
| 1.3.6.1.4.1.4515.1.3.13 | slTests | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.14 | slPort | SL-PORT-MIB |
| 1.3.6.1.4.1.4515.1.3.18 | slChassis | SL-CHASSIS-MIB |
| 1.3.6.1.4.1.4515.1.3.20 | slAlarmMib | SL-ALARM-MIB |
| 1.3.6.1.4.1.4515.1.3.21 | slSntp | SL-SNTP-MIB |
| 1.3.6.1.4.1.4515.1.3.22 | slEventMib | SL-EVENT-MIB |
| 1.3.6.1.4.1.4515.1.3.23 | slRadiusMIB | SL-RADIUS-MIB |
| 1.3.6.1.4.1.4515.1.3.24 | slSecuMib | SL-SECU-MIB |
| 1.3.6.1.4.1.4515.1.3.25 | slPmMib | SL-PM-MIB |
| 1.3.6.1.4.1.4515.1.3.30 | slFt | SL-FT-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AdminAccess TEXTUAL-CONVENTION The administration access level. | current | |||
| SoftwareRevision TEXTUAL-CONVENTION The Software Revision Name. | current | |||
| UserCommunity TEXTUAL-CONVENTION The User Community Type. | current | |||
| UserLogin TEXTUAL-CONVENTION The User Login Type. | current | |||
| UserPassword TEXTUAL-CONVENTION The User Password Type. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| slmSys OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.1 | |||
| slmSysGatewayAddr OBJECT-TYPE Gateway node IP Address. | 1.3.6.1.4.1.4515.1.3.1.1 | IpAddress | read-write | current |
| slmSysSubnetMask OBJECT-TYPE Subnetwork Mask IP Address. | 1.3.6.1.4.1.4515.1.3.1.2 | IpAddress | read-write | current |
| slmSysIpAddr OBJECT-TYPE Node IP Address. | 1.3.6.1.4.1.4515.1.3.1.3 | IpAddress | read-write | current |
| slmSysAlmAct OBJECT-TYPE Alarm Activation Time specified in Half-Seconds units. Alarm will be considered active only if it has been stable for that time. | 1.3.6.1.4.1.4515.1.3.1.4 | INTEGER (0..30) | read-write | current |
| slmSysAlmDeact OBJECT-TYPE Alarm Clearance Time specified in Half-Seconds units. Alarm will be considered clear only if it has been stable for that time. | 1.3.6.1.4.1.4515.1.3.1.5 | INTEGER (0..30) | read-write | current |
| slmSysAdminStatus OBJECT-TYPE Instruct the system to perform the boot according to the specified type. | 1.3.6.1.4.1.4515.1.3.1.6 | INTEGER {up(1), down(2), warmBoot(3), coldBoot(4), factoryBoot(5), testing(6), hotBoot(7)} | read-write | current |
| slmSysOperStatus OBJECT-TYPE The operational system state. | 1.3.6.1.4.1.4515.1.3.1.7 | INTEGER {up(1), down(2), testing(3)} | read-only | current |
| slmBoxSize OBJECT-TYPE The box size as was configured in the SEEP. | 1.3.6.1.4.1.4515.1.3.1.8 | INTEGER {half(1), full(2)} | read-only | current |
| slmSysCalendarTime OBJECT-TYPE The system calendar time. | 1.3.6.1.4.1.4515.1.3.1.9 | DateAndTime | read-write | current |
| slmSysPmStartOfDay OBJECT-TYPE The time of day that marks the beginning of each 1-day interval used in the performance monitoring parameters for all interfaces in the NE. This time is on an hour boundary. | 1.3.6.1.4.1.4515.1.3.1.10 | INTEGER (0..23) | read-write | current |
| slmSysActiveSwVersion OBJECT-TYPE Determines the active software version. This is the version that will be loaded by rebooted cards. It is not legal to set this object to the id of an illegal system software version. swRevFtpStart(3) - is set by the NMS to signal the FTP start. swRevFtpEnd(4) - is set by the NMS to signal the FTP completion. swRevAHot(5) - means to change the active software version to A, and to preform hot restart to all cards. swRevBHot(6) - means to change the active software version to B, and to preform hot restart to all cards. Reading the object returns the current active software version. | 1.3.6.1.4.1.4515.1.3.1.11 | INTEGER {swRevA(1), swRevB(2), swRevFtpStart(3), swRevFtpEnd(4), swRevAHot(5), swRevBHot(6)} | read-write | current |
| slmSwRevTable OBJECT-TYPE This table keeps the information about the system software revisions. | 1.3.6.1.4.1.4515.1.3.1.12 | not-accessible | current | |
| slmSwRevEntry OBJECT-TYPE An entry exist per system revsion type (A or B). | 1.3.6.1.4.1.4515.1.3.1.12.1 | not-accessible | current | |
| slmSwRevDirectory OBJECT-TYPE The directory name A or B of this system software revision. | 1.3.6.1.4.1.4515.1.3.1.12.1.1 | INTEGER {swRevDirA(1), swRevDirB(2)} | read-only | current |
| slmSwRevStatus OBJECT-TYPE The status of the system software directory content. The value valid(1) means that the data of this entry is valid and that the software is loaded correctly and is currently used. The value copyingToStandby(3) means that the SW is currently being copied to the Standby Switch. During this period the NMS is not allowed to upgrade the SW version. This value is applicable only to the Standby software version. The value invalid(2) means otherwise. This value is applicable only to the Standby software version. | 1.3.6.1.4.1.4515.1.3.1.12.1.2 | INTEGER {valid(1), invalid(2), copyingToStandby(3)} | read-only | current |
| slmSwRevName OBJECT-TYPE The identification string of the system software revision. This value is taken from the content of the system software configuration data that is downloded with the rest of the software files. | 1.3.6.1.4.1.4515.1.3.1.12.1.3 | SoftwareRevision | read-only | current |
| slmSwRevDate OBJECT-TYPE The release date of the system software revision. This value is taken from the content of the system software configuration data that is downloded with the rest of the software files. | 1.3.6.1.4.1.4515.1.3.1.12.1.4 | DateAndTime | read-only | current |
| slmConfigSysUptime OBJECT-TYPE The number of timer ticks at the last configuration command. | 1.3.6.1.4.1.4515.1.3.1.13 | TimeTicks | read-only | current |
| slmConfigSysSignalType OBJECT-TYPE This variable identifies whether a SONET or a SDH signal is used across this node. This value is configured by the NMS. | 1.3.6.1.4.1.4515.1.3.1.14 | INTEGER {sonet(1), sdh(2)} | read-write | current |
| slmRebootDelay OBJECT-TYPE The number of seconds to wait before reboot. When this number equal to 0 the reboot should occur immediately. After the reboot command is initiated, the value of this object decrements accordingly. Initially, the object value is 0. It is also possible to change this value after starting the reboot process. Getting the value 0 means that there is no pending reboot process in the background. | 1.3.6.1.4.1.4515.1.3.1.16 | INTEGER (0..300) | read-write | current |
| slmVcatDelay OBJECT-TYPE The value of the VCAT delay as was read from the SEEP. | 1.3.6.1.4.1.4515.1.3.1.17 | INTEGER | read-only | current |
| slmTid OBJECT-TYPE The SL TL1 name. | 1.3.6.1.4.1.4515.1.3.1.18 | DisplayString (SIZE(0..20)) | read-write | current |
| slmPsuNumber OBJECT-TYPE Let the NMS to configure the number of PSU in the system. If this number mismatch the reality, a mismatch alarm is declared. | 1.3.6.1.4.1.4515.1.3.1.19 | INTEGER | read-write | current |
| slmOemType OBJECT-TYPE This value tells the NMS the type of the OEM. This value is read from the SEEP. | 1.3.6.1.4.1.4515.1.3.1.20 | INTEGER | read-only | current |
| slmSysName OBJECT-TYPE This value is the shadow of the sysName object. | 1.3.6.1.4.1.4515.1.3.1.21 | DisplayString | read-only | current |
| slmSysLocation OBJECT-TYPE This value is the shadow of the sysLocation object. | 1.3.6.1.4.1.4515.1.3.1.22 | DisplayString | read-only | current |
| slmSysResetPm OBJECT-TYPE Writing 1 to this object reset the system PM counters. | 1.3.6.1.4.1.4515.1.3.1.23 | INTEGER | read-write | current |
| slmSysUplinkRate OBJECT-TYPE This object is used to configure the rate of the Uplink. The configured rate applies to both Uplink ports. | 1.3.6.1.4.1.4515.1.3.1.24 | INTEGER {up100(1), up1000(2)} | read-write | current |
| slmSysChassisId OBJECT-TYPE This object is used to configure the chassis-id. Node with the same value are considered to be stacked. | 1.3.6.1.4.1.4515.1.3.1.25 | INTEGER | read-write | current |
| slmSysNetworkPrefix OBJECT-TYPE This object is used to configure the Network Prefix. The prefix is used when the IP address of the node is assigned automatically. The automatic IP address of the node has the form A.x.y.z where x.y.z is the last 3 bytes of the MAC address 00:05:fd:x:y:z of the box. The A is the assigned Network Prefix. For example if the A is 10 and the MAC address is 00:05:fd:f6:55:11 the automatic IP of the node shall be 10.253.85.17. | 1.3.6.1.4.1.4515.1.3.1.26 | INTEGER | read-write | current |
| slmSysLanIpAddr OBJECT-TYPE Node LAN IP Address. | 1.3.6.1.4.1.4515.1.3.1.27 | IpAddress | read-write | current |
| slmSysLanSubnetAddr OBJECT-TYPE Node LAN Subnet Address. | 1.3.6.1.4.1.4515.1.3.1.28 | IpAddress | read-write | current |
| slmPmAvailable OBJECT-TYPE This value tells the NMS if the PM support is available. The value is taken from the SEEP and can not be changed. | 1.3.6.1.4.1.4515.1.3.1.29 | TruthValue | read-only | current |
| slmPortsNumber OBJECT-TYPE The number of ports in the system. The value is taken from the SEEP. | 1.3.6.1.4.1.4515.1.3.1.30 | INTEGER | read-only | current |
| slmEdfaNumber OBJECT-TYPE The number of EDFA units in the system. The value is taken from the SEEP. | 1.3.6.1.4.1.4515.1.3.1.31 | INTEGER | read-only | current |
| slmMuxNumber OBJECT-TYPE The number of MUX units in the system. The value is taken from the SEEP. | 1.3.6.1.4.1.4515.1.3.1.32 | INTEGER | read-only | current |
| slmOpticalSwitchExist OBJECT-TYPE Should an Optical Switch unit exist in the system. The value is taken from the SEEP. | 1.3.6.1.4.1.4515.1.3.1.33 | TruthValue | read-only | current |
| slmReadCommunity OBJECT-TYPE The SNMP read-only community. This object should be accessible only by the Admin users of the Web. | 1.3.6.1.4.1.4515.1.3.1.34 | DisplayString | read-write | current |
| slmWriteCommunity OBJECT-TYPE The SNMP read-write community. This object should be accessible only by the Admin users of the Web. | 1.3.6.1.4.1.4515.1.3.1.35 | DisplayString | read-write | current |
| slmSysEffectiveSubnetMask OBJECT-TYPE Effective Management subnetwork mask IP Address. | 1.3.6.1.4.1.4515.1.3.1.36 | IpAddress | read-only | current |
| slmSysEffectiveIpAddr OBJECT-TYPE Effective Management IP Address. | 1.3.6.1.4.1.4515.1.3.1.37 | IpAddress | read-only | current |
| slmSysLanEffectiveIpAddr OBJECT-TYPE Effective LAN IP Address. | 1.3.6.1.4.1.4515.1.3.1.38 | IpAddress | read-only | current |
| slmSysLanEffectiveSubnetAddr OBJECT-TYPE Effective LAN subnetwork mask address. | 1.3.6.1.4.1.4515.1.3.1.39 | IpAddress | read-only | current |
| slmSysGatewayEffectiveIpAddr OBJECT-TYPE Effective Gateway IP Address. | 1.3.6.1.4.1.4515.1.3.1.40 | IpAddress | read-only | current |
| slmSysMode OBJECT-TYPE System Mode configuration (this object applies to muxponder). | 1.3.6.1.4.1.4515.1.3.1.41 | INTEGER | read-write | current |
| slmSysTrapFormat OBJECT-TYPE The format of the sent trap: 1 - the full ifIndex is sent. 2 - only the port number part of the ifIndex is sent. | 1.3.6.1.4.1.4515.1.3.1.42 | INTEGER {fullIfIndex(1), portIfIndex(2)} | read-write | current |
| slmSysTemperature OBJECT-TYPE The temperature of the PL device in Celsius. | 1.3.6.1.4.1.4515.1.3.1.43 | INTEGER | read-only | current |
| slmNetworkMode OBJECT-TYPE 1 - means that the LAN is define on a different vlan than the MNG ports. 2 - means that the LAN is on the same vlan and the MNG ports | 1.3.6.1.4.1.4515.1.3.1.44 | INTEGER {routing(1), switching(2)} | read-write | current |
| slm40GConf OBJECT-TYPE g40(0) - No 40G ports (service ports 3..10 are disabled) g41(1) - Single 40G Port 1 (service ports 7,8,9,10 are disabled) g42(2) - Single 40G Port 2 (service ports 3,4,5,6 are disabled) g43(3) - Dual 40G ports | 1.3.6.1.4.1.4515.1.3.1.45 | INTEGER {g40(0), g41(1), g42(2), g43(3), g100(100)} | read-write | current |
| slmRstpEnabled OBJECT-TYPE Enable/Disable the RSTP protocol. Defalut value is TRUE. | 1.3.6.1.4.1.4515.1.3.1.46 | TruthValue | read-write | current |
| slmTopologyEnabled OBJECT-TYPE Enable/Disable the topology discovery protocol. Defalut value is TRUE. | 1.3.6.1.4.1.4515.1.3.1.47 | TruthValue | read-write | current |
| slmAdminCommunity OBJECT-TYPE The SNMP admin community. This object should be accessible only by the Admin users of the Web. | 1.3.6.1.4.1.4515.1.3.1.48 | DisplayString | read-write | current |
| slmTrapCommunity OBJECT-TYPE The SNMP v1/v2c trap community. This object should be accessible only by the Admin users of the Web. | 1.3.6.1.4.1.4515.1.3.1.49 | DisplayString | read-write | current |
| slmSysSnmpVersion OBJECT-TYPE The format of the sent trap: 3 - allow only SNMPv3 pdus. 4 - allow all pdus (coexistance mode). | 1.3.6.1.4.1.4515.1.3.1.50 | INTEGER {v3Only(3), v1v2v3(4)} | read-write | current |
| slmSysEncryptionCapability OBJECT-TYPE The encryption capability: 1 - No Encryption. 2 - Encryption Supported. | 1.3.6.1.4.1.4515.1.3.1.51 | INTEGER {disabled(1), enabled(2)} | read-only | current |
| slmAdmin OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.2 | |||
| slmAdminTable OBJECT-TYPE The admin table is used to supply the access level for the user login. | 1.3.6.1.4.1.4515.1.3.2.1 | not-accessible | current | |
| slmAdminEntry OBJECT-TYPE An entry exist per user. | 1.3.6.1.4.1.4515.1.3.2.1.1 | not-accessible | current | |
| slmAdminLogin OBJECT-TYPE The user login. | 1.3.6.1.4.1.4515.1.3.2.1.1.3 | UserLogin | read-create | current |
| slmAdminPassword OBJECT-TYPE The user password. | 1.3.6.1.4.1.4515.1.3.2.1.1.4 | UserPassword | read-create | current |
| slmAdminRowStatus OBJECT-TYPE This object is used to create and delete rows in the slmAdminTable. | 1.3.6.1.4.1.4515.1.3.2.1.1.5 | RowStatus | read-create | current |
| slmAdminAccess OBJECT-TYPE The user access level. | 1.3.6.1.4.1.4515.1.3.2.1.1.6 | AdminAccess | read-create | current |
| slmSnmpv3Auth OBJECT-TYPE The user SNMP v3 authentication mode. | 1.3.6.1.4.1.4515.1.3.2.1.1.7 | INTEGER {noaccess(1), noauth(2), md5(3), sha(4), sha224(5), sha256(6), sha384(7), sha512(8)} | read-create | current |
| slmSnmpv3Priv OBJECT-TYPE The user SNMP v3 privacy mode. | 1.3.6.1.4.1.4515.1.3.2.1.1.8 | INTEGER {noaccess(1), nopriv(2), des(3), aes(4), des3(5), aes192(6), aes256(7)} | read-create | current |
| slmSnmpv3Password OBJECT-TYPE The SNMP v3 Password | 1.3.6.1.4.1.4515.1.3.2.1.1.9 | UserPassword | read-create | current |
| slmAuth OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.3 | |||
| slmAuthTable OBJECT-TYPE The authentication table is used for creating authentication requests. | 1.3.6.1.4.1.4515.1.3.3.1 | not-accessible | current | |
| slmAuthEntry OBJECT-TYPE The entry is used to compute the slmAuthCommunity based on the indexes Login and Password. Note that the table contains no data, and when using GetNext it apears to be empty. To compute the community the NMS should Get the field slmAuthCommunity with the corresponding indexes. | 1.3.6.1.4.1.4515.1.3.3.1.1 | not-accessible | current | |
| slmAuthLogin OBJECT-TYPE The user login. | 1.3.6.1.4.1.4515.1.3.3.1.1.1 | UserLogin | not-accessible | current |
| slmAuthPassword OBJECT-TYPE The user password. | 1.3.6.1.4.1.4515.1.3.3.1.1.2 | UserPassword | not-accessible | current |
| slmAuthCommunity OBJECT-TYPE The user community name correponds to slmAuthLogin and slmAuthPassword and which defines user'a access scope. The value of this object is available for reading only after the the first three colunms have been filled | 1.3.6.1.4.1.4515.1.3.3.1.1.3 | UserCommunity | read-only | current |
| slmLogin OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.4 | |||
| slmTrap OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.5 | |||
| slmTrapDestTable OBJECT-TYPE A list of trap destination entries. | 1.3.6.1.4.1.4515.1.3.5.1 | not-accessible | current | |
| slmTrapDestEntry OBJECT-TYPE This entry includes a destination IP address to which to send traps for this community. An entry in the table is created by the NMS. In order to keep the entry in the table the management should refresh the entry periodicaly. Otherwise it will be deleted by the GNE after 5 minutes. | 1.3.6.1.4.1.4515.1.3.5.1.1 | not-accessible | current | |
| slmTrapDestAddress OBJECT-TYPE A copy of slmTrapDestIpAddress represented as an integer. Needed due to VxWorks failure to handle an ip address as a table index. | 1.3.6.1.4.1.4515.1.3.5.1.1.1 | Integer32 | read-create | current |
| slmTrapDestRowStatus OBJECT-TYPE This object is used to create and delete rows in the trapDestTable. | 1.3.6.1.4.1.4515.1.3.5.1.1.2 | RowStatus | read-create | current |
| slmTrapDestCommunity OBJECT-TYPE A community to which this destination address belongs. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the trapDestTable with a trapDestCommunity equal to eventCommunity. This object may not be modified if the associated trapDestStatus object is equal to active(1). | 1.3.6.1.4.1.4515.1.3.5.1.1.3 | UserCommunity | read-create | current |
| slmTrapDestProtVersion OBJECT-TYPE The SNMP version of the traps which this manager expects to receive. | 1.3.6.1.4.1.4515.1.3.5.1.1.4 | INTEGER {snmpVer1(1), snmpVer2(2), snmpVer3(3)} | read-create | current |
| slmTrapUserLogin OBJECT-TYPE The user login. This is used to describe to the manager the current active login sessions. The NMS should read this value periodicaly in order to refresh its entry, otherwise the entry will be deleted by the GNE after a timeout of 5 minutes. | 1.3.6.1.4.1.4515.1.3.5.1.1.5 | UserLogin | read-create | current |
| slmTrapUserAccess OBJECT-TYPE The user access. | 1.3.6.1.4.1.4515.1.3.5.1.1.6 | AdminAccess | read-create | current |
| slmTrapEnable OBJECT-TYPE TRUE - means that that the alarms are allowed. FALSE - means that all alarms should not be sent for this session. | 1.3.6.1.4.1.4515.1.3.5.1.1.7 | TruthValue | read-create | current |
| slmTrapPort OBJECT-TYPE The destination port for to send the trap. The default value is 162. | 1.3.6.1.4.1.4515.1.3.5.1.1.8 | INTEGER | read-create | current |
| slmTrapDestIpAddress OBJECT-TYPE The address to send traps on behalf of this entry. This object may not be modified if the associated slmTrapDestStatus object is equal to active(1). | 1.3.6.1.4.1.4515.1.3.5.1.1.9 | IpAddress | read-create | current |
| slmTrapLogTable OBJECT-TYPE A list of trap log entries. | 1.3.6.1.4.1.4515.1.3.5.2 | not-accessible | current | |
| slmTrapLogEntry OBJECT-TYPE An entry in the table keeps the log of a single trap. | 1.3.6.1.4.1.4515.1.3.5.2.1 | not-accessible | current | |
| slmTrapLogId OBJECT-TYPE The trap log id. The id increments each time a new log entry arrives. | 1.3.6.1.4.1.4515.1.3.5.2.1.1 | Gauge32 | read-only | current |
| slmTrapLogName OBJECT-TYPE The object id of the trap. | 1.3.6.1.4.1.4515.1.3.5.2.1.2 | OCTET STRING (SIZE(0..80)) | read-only | current |
| slmTrapLogTimeStamp OBJECT-TYPE The trap time stamp. | 1.3.6.1.4.1.4515.1.3.5.2.1.3 | TimeTicks | read-only | current |
| slmTrapLogParam1 OBJECT-TYPE The first parameter of the trap. | 1.3.6.1.4.1.4515.1.3.5.2.1.4 | OCTET STRING (SIZE(0..80)) | read-only | current |
| slmTrapLogParam2 OBJECT-TYPE The second parameter of the trap. | 1.3.6.1.4.1.4515.1.3.5.2.1.5 | OCTET STRING (SIZE(0..80)) | read-only | current |
| slmTrapLogParam3 OBJECT-TYPE The third parameter of the trap. | 1.3.6.1.4.1.4515.1.3.5.2.1.6 | OCTET STRING (SIZE(0..80)) | read-only | current |
| slmTrapLogParam4 OBJECT-TYPE The forth parameter of the trap. | 1.3.6.1.4.1.4515.1.3.5.2.1.7 | OCTET STRING (SIZE(0..80)) | read-only | current |
| slmTrapLogParam5 OBJECT-TYPE The fifth parameter of the trap. | 1.3.6.1.4.1.4515.1.3.5.2.1.8 | OCTET STRING (SIZE(0..80)) | read-only | current |
| slmTrapLogParam6 OBJECT-TYPE The sixth parameter of the trap. | 1.3.6.1.4.1.4515.1.3.5.2.1.9 | OCTET STRING (SIZE(0..80)) | read-only | current |
| slmSyslogDestTable OBJECT-TYPE A list of syslog destination entries. | 1.3.6.1.4.1.4515.1.3.5.7 | not-accessible | current | |
| slmSyslogDestEntry OBJECT-TYPE This entry includes a destination IP addresses to which to send log messages. | 1.3.6.1.4.1.4515.1.3.5.7.1 | not-accessible | current | |
| slmSyslogDestAddress OBJECT-TYPE A copy of slmSyslogDestTable represented as an integer. Needed due to VxWorks failure to handle an ip address as a table index. | 1.3.6.1.4.1.4515.1.3.5.7.1.1 | Integer32 | read-create | current |
| slmSyslogDestRowStatus OBJECT-TYPE This object is used to create and delete rows in the slmSyslogDestTable. | 1.3.6.1.4.1.4515.1.3.5.7.1.2 | RowStatus | read-create | current |
| slmSyslogLevel OBJECT-TYPE The level of log messages which this manager expects to receive. | 1.3.6.1.4.1.4515.1.3.5.7.1.3 | INTEGER {traps(1), log(2), debug(3)} | read-create | current |
| slmSyslogPort OBJECT-TYPE The destination port for to send the log message. The default value is 514. | 1.3.6.1.4.1.4515.1.3.5.7.1.4 | INTEGER | read-create | current |
| slmSyslogDestIpAddress OBJECT-TYPE The address to send log messages on behalf of this entry. | 1.3.6.1.4.1.4515.1.3.5.7.1.5 | IpAddress | read-create | current |
| slmLogFile OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.8 | |||
| slmConfigFile OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.9 | |||
| slmChPass OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.12 | |||
| slmChPassTable OBJECT-TYPE The table is used for changing the user passowrd. | 1.3.6.1.4.1.4515.1.3.12.1 | not-accessible | current | |
| slmChPassEntry OBJECT-TYPE The entry is used to set the slmChPassNewPass. Note that the table contains no data, and when using GetNext it apears to be empty. To change the password, the NMS should issue a SET command with the new password while the two indexes equal to the old user login and password. | 1.3.6.1.4.1.4515.1.3.12.1.1 | not-accessible | current | |
| slmChPassLogin OBJECT-TYPE The user login. | 1.3.6.1.4.1.4515.1.3.12.1.1.1 | UserLogin | not-accessible | current |
| slmChPassOldPass OBJECT-TYPE The user password. | 1.3.6.1.4.1.4515.1.3.12.1.1.2 | UserPassword | not-accessible | current |
| slmChPassNewPass OBJECT-TYPE The user password. | 1.3.6.1.4.1.4515.1.3.12.1.1.3 | UserPassword | read-write | current |
| slmLicense OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.3.17 | |||
| slmLicenseTable OBJECT-TYPE A list of License entries. | 1.3.6.1.4.1.4515.1.3.17.1 | not-accessible | current | |
| slmLicenseEntry OBJECT-TYPE An entry in the table correspond to installed license. | 1.3.6.1.4.1.4515.1.3.17.1.1 | not-accessible | current | |
| slmLicenseIndex OBJECT-TYPE The license index. | 1.3.6.1.4.1.4515.1.3.17.1.1.1 | INTEGER | read-only | current |
| slmLicenseExpiration OBJECT-TYPE The number of seconds to expiration. Value -1 for permanent. | 1.3.6.1.4.1.4515.1.3.17.1.1.2 | INTEGER | read-only | current |
| slmLicenseId OBJECT-TYPE The license text | 1.3.6.1.4.1.4515.1.3.17.1.1.3 | DisplayString (SIZE(0..80)) | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| slmTrapSoftwareStatusChange NOTIFICATION-TYPE A slmTrapSoftwareStatusChange trap is sent when the value of the slmSwRevStatus of one of the directories changes. | 1.3.6.1.4.1.4515.1.3.5.4 | current |
| slmTrapSysNameChange NOTIFICATION-TYPE A slmTrapSysNameChange trap is sent when the value of the slmSysName is changed. | 1.3.6.1.4.1.4515.1.3.5.5 | current |
| slmTrapSysLocationChange NOTIFICATION-TYPE A slmTrapSysLocationChange trap is sent when the value of the slmSysLocation is changed. | 1.3.6.1.4.1.4515.1.3.5.6 | current |