MIBs Depot

SENAO-ENTERPRISE-INDOOR-AP-CB-MIB

Registered at
1.3.6.1.4.1.14125
Last updated
1905-11-25 00:00
Organization
Senao R&D Dept., S/W Division
Namespace
senao
Source file
SENAO-ENTERPRISE-INDOOR-AP-CB-MIB
Digest
sha256:33a139931f74e9d0a28ac0cdf620d400494265a261e302ac20156e86f456af74

Description

The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE.

Contact

Info SENAO INTERNATIONAL CO., LTD. No.500, Fusing 3 Rd., Hwa-Ya Technical Park, Kuei-Shan Hsiang, TAOYUAN County 333, TAIWAN, R.O.C. Tel: 886-3-328-9289 Fax: 886-3-328-9666 E-mail: info@senao.com.tw

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SENAO-ENTERPRISE-INDOOR-AP-CB-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.14125.1engeniusmeshENGENIUS-MESH-MIB
1.3.6.1.4.1.14125.2engeniusprivateENGENIUS-PRIVATE-MIB
1.3.6.1.4.1.14125.3engeniusstatusENGENIUS-STATUS-MIB
1.3.6.1.4.1.14125.4privacySettingsGroupSENAO-WLAN-AP-MIB
1.3.6.1.4.1.14125.5systemSettingsGroupSENAO-WLAN-AP-MIB
1.3.6.1.4.1.14125.6webAdministratorSettingsGroupSENAO-WLAN-AP-MIB
1.3.6.1.4.1.14125.7dhcpSettingsGroupSENAO-WLAN-AP-MIB
1.3.6.1.4.1.14125.8wdsSettingsGroupSENAO-WLAN-AP-MIB

Objects

NameOIDSyntaxAccessStatus
indoorWirelessDevice
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100
entSystem
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.1
entPassword
OBJECT-TYPE
Administration password
1.3.6.1.4.1.14125.100.1.2DisplayString (SIZE(0..32))write-onlymandatory
entSysModel
OBJECT-TYPE
System model
1.3.6.1.4.1.14125.100.1.3DisplayStringread-onlymandatory
entSysMode
OBJECT-TYPE
System mode, 0:AP router, 1:Repeater, 2: AP bridge, 3: Client bridge, 4: Client router, 5: WDS bridge
1.3.6.1.4.1.14125.100.1.4INTEGER {ap-router(0), repeater(1), ap-bridge(2), client-bridge(3), client-router(4), wds-bridge(5)}read-onlymandatory
entSysUpTime
OBJECT-TYPE
System uptime
1.3.6.1.4.1.14125.100.1.5TimeTicksread-onlymandatory
entHwVersion
OBJECT-TYPE
The version of the hardware
1.3.6.1.4.1.14125.100.1.6DisplayStringread-onlymandatory
entSN
OBJECT-TYPE
Serial Number
1.3.6.1.4.1.14125.100.1.7DisplayStringread-onlymandatory
entKenelVersion
OBJECT-TYPE
The version of the kernel
1.3.6.1.4.1.14125.100.1.8DisplayStringread-onlymandatory
entAppVersion
OBJECT-TYPE
The version of the system application
1.3.6.1.4.1.14125.100.1.9DisplayStringread-onlymandatory
entReset
OBJECT-TYPE
Setting this attribute TRUE causes the AP rebooted
1.3.6.1.4.1.14125.100.1.10TruthValuewrite-onlymandatory
entResetToDefault
OBJECT-TYPE
Setting this attribute TRUE will Reboot the system and change settings to factory default
1.3.6.1.4.1.14125.100.1.11TruthValuewrite-onlymandatory
entApplyModules
OBJECT-TYPE
Setting this attribute TRUE will apply the changed modules to reload
1.3.6.1.4.1.14125.100.1.12TruthValuewrite-onlymandatory
entLAN
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.2
entLANIP
OBJECT-TYPE
LAN IP address
1.3.6.1.4.1.14125.100.2.1IpAddressread-writemandatory
entLANSubnetMask
OBJECT-TYPE
LAN subnet mask
1.3.6.1.4.1.14125.100.2.2IpAddressread-writemandatory
entSTPEnable
OBJECT-TYPE
Set this attribute TRUE will enable 802.1d Spanning Tree.
1.3.6.1.4.1.14125.100.2.3TruthValueread-writemandatory
entDHCPEnable
OBJECT-TYPE
When system mode is not 1(Repeater) and 5(WDS bridge), set this attribute TRUE will enable the DHCP server function of device
1.3.6.1.4.1.14125.100.2.4TruthValueread-writemandatory
entIPPoolStart
OBJECT-TYPE
TWhen system mode is not 1(Repeater) and 5(WDS bridge), set the start address of DHCP IP pool
1.3.6.1.4.1.14125.100.2.5IpAddressread-writemandatory
entIPPoolEnd
OBJECT-TYPE
When system mode is not 1(Repeater) and 5(WDS bridge), set the end address of DHCP IP pool
1.3.6.1.4.1.14125.100.2.6IpAddressread-writemandatory
entIPLeaseTime
OBJECT-TYPE
When system mode is not 1(Repeater) and 5(WDS bridge), the time period client can have the IP address assigned by DHCP server 0(half hour), 1(one hour) 2(two hours), 3(half day), 4(one day), 5(two days), 6(one week), 7(two weeks), 8(forever)
1.3.6.1.4.1.14125.100.2.7INTEGER {half-hour(0), one-hour(1), two-hours(2), half-day(3), one-day(4), two-days(5), one-week(6), two-weeks(7), forever(8)}read-writemandatory
entWAN
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.3
entRouterEnable
OBJECT-TYPE
Only When op mode is 0(AP) or (Client bridge), can set this attribute. Set TRUE will enable the router.
1.3.6.1.4.1.14125.100.3.1TruthValueread-writemandatory
entMacFilter
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.4
entLanMacFilteringEnable
OBJECT-TYPE
Set this attribute TRUE will enable the LAN MAC filtering
1.3.6.1.4.1.14125.100.4.1TruthValueread-writemandatory
entLanMacFilteringMode
OBJECT-TYPE
The mode of LAN MAC filtering can be 0(white list), 1(black list)
1.3.6.1.4.1.14125.100.4.2INTEGER {white-list(0), black-list(1)}read-writemandatory
entLanMacFilterTable
OBJECT-TYPE
This table provides one row for each LAN MAC filtering. Each row contains the enterprise LAN MAC filtering table for that LAN MAC filtering.
1.3.6.1.4.1.14125.100.4.3not-accessiblecurrent
entLanMacFilterEntry
OBJECT-TYPE
An entry in the entLanMacFilterTable.
1.3.6.1.4.1.14125.100.4.3.1not-accessiblecurrent
entMacAddressIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the LAN MAC Filtering Table
1.3.6.1.4.1.14125.100.4.3.1.1INTEGERread-onlycurrent
entMacAddress
OBJECT-TYPE
MAC address list in the LAN MAC filtering table
1.3.6.1.4.1.14125.100.4.3.1.2DisplayStringread-onlycurrent
entMacFilteringValid
OBJECT-TYPE
The validity status of each corresponding MAC address in LAN MAC filtering table
1.3.6.1.4.1.14125.100.4.3.1.3TruthValueread-onlycurrent
entWlan
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.5
entWlanCommonInfo
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.5.1
entOpMode
OBJECT-TYPE
Set op mode: 0(AP), 1(Client bridge), 2(WDS bridge), 3(Repeater)
1.3.6.1.4.1.14125.100.5.1.1INTEGER {ap(0), client-bridge(1), wds-bridge(2), repeater(3)}read-writemandatory
entRadio
OBJECT-TYPE
Set this attribute TRUE will enable the radio
1.3.6.1.4.1.14125.100.5.1.2TruthValueread-writemandatory
entAPMode
OBJECT-TYPE
Only when op mode is 0(AP), we can set AP mode: 0(AP), 1(WDS)
1.3.6.1.4.1.14125.100.5.1.3INTEGER {ap(0), wds(1)}read-writemandatory
entBand
OBJECT-TYPE
The wireless mode: 0(802.11 b/g), 1(802.11 b), 2(802.11 a), 4(802.11 g), 6(802.11 n), 7(802.11 g/n), 8(802.11 a/n), 9(802.11 b/g/n)
1.3.6.1.4.1.14125.100.5.1.4INTEGER {ieee802dot11-b-g(0), ieee802dot11-b(1), ieee802dot11-a(2), ieee802dot11-g(4), ieee802dot11-n(6), ieee802dot11-g-n(7), ieee802dot11-a-n(8), ieee802dot11-b-g-n(9)}read-writemandatory
entESSIDNum
OBJECT-TYPE
Set the Number of multiple ESSID
1.3.6.1.4.1.14125.100.5.1.5INTEGER (1..4)read-writemandatory
entChannel
OBJECT-TYPE
The current operating frequency channel
1.3.6.1.4.1.14125.100.5.1.6INTEGER (1..14)read-writemandatory
entDataRate
OBJECT-TYPE
This attribute specifies the data rate at which the station may transmit data in Mbps 0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps), 18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps)
1.3.6.1.4.1.14125.100.5.1.7INTEGER {auto(0), oneMbps(1), twoMbps(2), fiveNhalfMbps(5), sixMbps(6), nineMbps(9), elevenMbps(11), twelveMbps(12), eighteenMbps(18), twentytwoMbps(24), thirtysixMbps(36), fortyeightMbps(48), fiftyfourMbps(54)}read-writemandatory
entNDataRate
OBJECT-TYPE
This attribute specifies the 11n data rate
1.3.6.1.4.1.14125.100.5.1.8INTEGERread-writemandatory
entTxPower
OBJECT-TYPE
The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%)
1.3.6.1.4.1.14125.100.5.1.9INTEGERread-writemandatory
entBeaconInterval
OBJECT-TYPE
This attribute specifies the number of TU that a station shall use for scheduling Beacon transmissions
1.3.6.1.4.1.14125.100.5.1.10INTEGER (20..1024)read-writemandatory
entDTIMPeriod
OBJECT-TYPE
This attribute specifies the number of beacon intervals
1.3.6.1.4.1.14125.100.5.1.11INTEGER (1..255)read-writemandatory
entFragmentationThreshold
OBJECT-TYPE
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY
1.3.6.1.4.1.14125.100.5.1.12INTEGER (256..2346)read-writemandatory
entRTSThreshold
OBJECT-TYPE
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed.
1.3.6.1.4.1.14125.100.5.1.13INTEGER (0..2347)read-writemandatory
entChannelBandwidth
OBJECT-TYPE
This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ)
1.3.6.1.4.1.14125.100.5.1.14INTEGER (0..1)read-writemandatory
entPreambleType
OBJECT-TYPE
This attribute specifies the preamble type: 1(Short), 2(Long)
1.3.6.1.4.1.14125.100.5.1.15INTEGER {short(1), long(2)}read-writemandatory
entCTSProtection
OBJECT-TYPE
This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None)
1.3.6.1.4.1.14125.100.5.1.16INTEGER {auto(0), always(1), none(2)}read-writemandatory
entWlanESSIDInfoTable
OBJECT-TYPE
This table provides one row for each ESSID information. Each row contains the enterprise ESSID information Table for that ESSID information.
1.3.6.1.4.1.14125.100.5.2not-accessiblecurrent
entWlanESSIDInfoEntry
OBJECT-TYPE
An entry in the entWlanESSIDInfoTable.
1.3.6.1.4.1.14125.100.5.2.1not-accessiblecurrent
entWlanESSIDInfoIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the ESSID information Table
1.3.6.1.4.1.14125.100.5.2.1.1INTEGERread-onlycurrent
entESSID
OBJECT-TYPE
This attribute reflects the Service Set ID used in the Desired- SSID parameter of the most recent MLME_Scan.request
1.3.6.1.4.1.14125.100.5.2.1.2OCTET STRING (SIZE(0..32))read-writecurrent
entBroadcastESSID
OBJECT-TYPE
Set this attribute TRUE will enable the hidden SSID
1.3.6.1.4.1.14125.100.5.2.1.3TruthValueread-writemandatory
entWMM
OBJECT-TYPE
Set this attribute TRUE will enable WMM
1.3.6.1.4.1.14125.100.5.2.1.4TruthValueread-writemandatory
entEncryption
OBJECT-TYPE
The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES)
1.3.6.1.4.1.14125.100.5.2.1.5INTEGER (0..4)read-writecurrent
entWlanAuthenticationType
OBJECT-TYPE
The current authentication algorithms: 0 (openSystem), 1(wepAuto), 2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2), 8(WPA1PSKWPA2PSK)
1.3.6.1.4.1.14125.100.5.2.1.6INTEGER (0..8)read-writecurrent
entWlanWepInfoTable
OBJECT-TYPE
This table provides one row for each WEP information. Each row contains the enterprise WEP information Table for that WEP information.
1.3.6.1.4.1.14125.100.5.3not-accessiblecurrent
entWlanWepInfoEntry
OBJECT-TYPE
An entry in the entWlanWepInfoTable.
1.3.6.1.4.1.14125.100.5.3.1not-accessiblecurrent
entWlanESSIDIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the WEP information Table
1.3.6.1.4.1.14125.100.5.3.1.1INTEGERread-onlycurrent
entWlanWepKeyID
OBJECT-TYPE
This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array
1.3.6.1.4.1.14125.100.5.3.1.2INTEGER (1..4)read-writecurrent
entWlanWepKey1Value
OBJECT-TYPE
Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
1.3.6.1.4.1.14125.100.5.3.1.3OCTET STRINGread-writecurrent
entWlanWepKey2Value
OBJECT-TYPE
Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
1.3.6.1.4.1.14125.100.5.3.1.4OCTET STRINGread-writecurrent
entWlanWepKey3Value
OBJECT-TYPE
Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
1.3.6.1.4.1.14125.100.5.3.1.5OCTET STRINGread-writecurrent
entWlanWepKey4Value
OBJECT-TYPE
Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
1.3.6.1.4.1.14125.100.5.3.1.6OCTET STRINGread-writecurrent
entWlanWPAInfoTable
OBJECT-TYPE
This table provides one row for each WPA information. Each row contains the enterprise WPA information Table for that WPA information.
1.3.6.1.4.1.14125.100.5.4not-accessiblecurrent
entWlanWPAInfoEntry
OBJECT-TYPE
An entry in the entWlanWPAInfoTable.
1.3.6.1.4.1.14125.100.5.4.1not-accessiblecurrent
entWlanWPAESSIDIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the WPA information Table
1.3.6.1.4.1.14125.100.5.4.1.1INTEGERread-onlycurrent
entPresharedKey
OBJECT-TYPE
The WPA Pre-Shared key. (8~63 ASCII or 64 HEX)
1.3.6.1.4.1.14125.100.5.4.1.2DisplayStringwrite-onlycurrent
ent802dot1xInfoTable
OBJECT-TYPE
This table provides one row for each 802.1x information. Each row contains the enterprise 802.1x information Table for that 802.1x information.
1.3.6.1.4.1.14125.100.5.5not-accessiblecurrent
ent802dot1xInfoEntry
OBJECT-TYPE
An entry in the ent802dot1xInfoTable.
1.3.6.1.4.1.14125.100.5.5.1not-accessiblecurrent
entWlan802dot1xESSIDIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the 802.1x information Table
1.3.6.1.4.1.14125.100.5.5.1.1INTEGERread-onlycurrent
entRADIUSServerIPAddress
OBJECT-TYPE
The address of RADIUS Server
1.3.6.1.4.1.14125.100.5.5.1.2IpAddressread-writecurrent
entRADIUSServerPort
OBJECT-TYPE
The port of RADIUS Server
1.3.6.1.4.1.14125.100.5.5.1.3INTEGER (1..65535)read-writecurrent
entRADIUSServerPassword
OBJECT-TYPE
The password of RADIUS Server
1.3.6.1.4.1.14125.100.5.5.1.4DisplayStringwrite-onlycurrent
entWlan802dot1xEnable
OBJECT-TYPE
Set this attribute TRUE will enable 802.1x
1.3.6.1.4.1.14125.100.5.5.1.5TruthValueread-writecurrent
entWlanClientListInfoTable
OBJECT-TYPE
This table provides one row for Wlan client list information.
1.3.6.1.4.1.14125.100.5.6not-accessiblecurrent
entWlanClientListInfoEntry
OBJECT-TYPE
An entry in the entWlanClientListInfoTable.
1.3.6.1.4.1.14125.100.5.6.1not-accessiblecurrent
entCLInfoIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the ClientList information Table
1.3.6.1.4.1.14125.100.5.6.1.1INTEGERread-onlycurrent
entCLInterface
OBJECT-TYPE
The Client connected SSID
1.3.6.1.4.1.14125.100.5.6.1.2OCTET STRINGread-writecurrent
entCLMAC
OBJECT-TYPE
The Client MAC
1.3.6.1.4.1.14125.100.5.6.1.3OCTET STRINGread-writecurrent
entCLRx
OBJECT-TYPE
The Rx value
1.3.6.1.4.1.14125.100.5.6.1.4OCTET STRINGread-writecurrent
entCLTx
OBJECT-TYPE
The Tx value
1.3.6.1.4.1.14125.100.5.6.1.5OCTET STRINGread-writecurrent
entCLSignal
OBJECT-TYPE
The Client Wlan Signal
1.3.6.1.4.1.14125.100.5.6.1.6INTEGERread-writecurrent
entCLConnectedTime
OBJECT-TYPE
The Client connected time
1.3.6.1.4.1.14125.100.5.6.1.7OCTET STRINGread-writecurrent
entCLIdleTime
OBJECT-TYPE
The Client idle time
1.3.6.1.4.1.14125.100.5.6.1.8OCTET STRINGread-writecurrent
entSNMP
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.6
entSNMPStatus
OBJECT-TYPE
The status of current SNMP agent.0:disable, 1:Enable
1.3.6.1.4.1.14125.100.6.1TruthValueread-writemandatory
entSNMPVerType
OBJECT-TYPE
The version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3
1.3.6.1.4.1.14125.100.6.2INTEGER {all(0), v1(1), v2c(2), v3(3)}read-writemandatory
entSNMPCommunityTable
OBJECT-TYPE
This table provides one row for each SNMP community. Each row contains the enterprise SNMP community table for that SNMP community.
1.3.6.1.4.1.14125.100.6.3not-accessiblecurrent
entSNMPCommunityEntry
OBJECT-TYPE
An entry in the entSNMPCommunityTable.
1.3.6.1.4.1.14125.100.6.3.1not-accessiblecurrent
entSNMPCommunityIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table
1.3.6.1.4.1.14125.100.6.3.1.1INTEGER (1..2)read-onlycurrent
entSNMPCommunityName
OBJECT-TYPE
The community name used to access SNMP device.
1.3.6.1.4.1.14125.100.6.3.1.2DisplayString (SIZE(0..32))read-writecurrent
entSNMPCommunityType
OBJECT-TYPE
The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table
1.3.6.1.4.1.14125.100.6.3.1.3INTEGER {read(1), write(2)}read-onlycurrent
entSNMPCommunityValid
OBJECT-TYPE
Display the validity information of corresponding community index
1.3.6.1.4.1.14125.100.6.3.1.4TruthValueread-onlycurrent
entSNMPTrap
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.6.4
entTrapStatus
OBJECT-TYPE
The trap status of current SNMP agent.0:disable, 1:Enable
1.3.6.1.4.1.14125.100.6.4.1TruthValueread-writemandatory
entTrapVer
OBJECT-TYPE
The trap version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3
1.3.6.1.4.1.14125.100.6.4.2INTEGER {all(0), v1(1), v2c(2), v3(3)}read-writemandatory
entTrapReceiverIPAddress
OBJECT-TYPE
Specify the IP address(host) to receive the trap report
1.3.6.1.4.1.14125.100.6.4.3IpAddressread-writemandatory
entTrapReceiverCommunityName
OBJECT-TYPE
Specify the community name for SNMP manager to receive the trap report
1.3.6.1.4.1.14125.100.6.4.4DisplayStringread-writemandatory
entTraps
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.20
entSystemTraps
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.20.1
entWanTraps
OBJECT-IDENTITY
1.3.6.1.4.1.14125.100.20.2

Notifications

NameOIDStatus
entSystemTrapsReboot
NOTIFICATION-TYPE
The trap is generated when the system is rebooted.
1.3.6.1.4.1.14125.100.20.1.1current
entSystemTrapsRestoreToDefault
NOTIFICATION-TYPE
The trap is generated when the default configuration of the system is restored.
1.3.6.1.4.1.14125.100.20.1.2current
entSystemTrapsReloadModules
NOTIFICATION-TYPE
The trap is generated when the system modules are reloaded.
1.3.6.1.4.1.14125.100.20.1.3current
entWanTrapsLinkDisconnect
NOTIFICATION-TYPE
The trap is generated when the PHY of WAN is disconnected and it was connected.
1.3.6.1.4.1.14125.100.20.2.1current
entWanTrapsLinkRecover
NOTIFICATION-TYPE
The trap is generated when the PHY of WAN is connected and it was disconnected
1.3.6.1.4.1.14125.100.20.2.2current