SENAO-WLAN-AP-MIB
- Registered at
- 1.3.6.1.4.1.14125.1.41.3.6.1.4.1.14125.41.3.6.1.4.1.14125.51.3.6.1.4.1.14125.61.3.6.1.4.1.14125.71.3.6.1.4.1.14125.8
- Namespace
- senao
- Source file
SENAO-WLAN-AP-MIB- Digest
sha256:4e1d6a1357ea3e1daec112bc3857c412948a5c89c6dfdca5ed33a9b5cf7ac89d
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, enterprises, iso, mgmt |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SENAO-WLAN-AP-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| senaoMIB OBJECT-IDENTITY | 1.3.6.1.4.1.14125 | |||
| senaoRFC1213Group OBJECT-IDENTITY | 1.3.6.1.4.1.14125.1 | |||
| ip OBJECT-IDENTITY | 1.3.6.1.4.1.14125.1.1 | |||
| ipInReceives OBJECT-TYPE The total number of input datagrams received from interfaces, including those received in error. @GET-FUNC=get_ip_row | 1.3.6.1.4.1.14125.1.1.1 | Counter | read-only | mandatory |
| ipForwDatagrams OBJECT-TYPE The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful. @GET-FUNC=get_ip_row | 1.3.6.1.4.1.14125.1.1.2 | Counter | read-only | mandatory |
| icmp OBJECT-IDENTITY | 1.3.6.1.4.1.14125.1.2 | |||
| icmpInMsgs OBJECT-TYPE The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. @GET-FUNC=get_icmp_row | 1.3.6.1.4.1.14125.1.2.1 | Counter | read-only | mandatory |
| icmpOutMsgs OBJECT-TYPE The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. @GET-FUNC=get_icmp_row | 1.3.6.1.4.1.14125.1.2.2 | Counter | read-only | mandatory |
| tcp OBJECT-IDENTITY | 1.3.6.1.4.1.14125.1.3 | |||
| tcpInSegs OBJECT-TYPE The total number of segments received, including those received in error. This count includes segments received on currently established connections. @GET-FUNC=get_tcp_row | 1.3.6.1.4.1.14125.1.3.1 | Counter | read-only | mandatory |
| tcpOutSegs OBJECT-TYPE The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. @GET-FUNC=get_tcp_row | 1.3.6.1.4.1.14125.1.3.2 | Counter | read-only | mandatory |
| udp OBJECT-IDENTITY | 1.3.6.1.4.1.14125.1.4 | |||
| udpInDatagrams OBJECT-TYPE The total number of UDP datagrams delivered to UDP users. @GET-FUNC=get_udp_row | 1.3.6.1.4.1.14125.1.4.1 | Counter | read-only | mandatory |
| udpOutDatagrams OBJECT-TYPE The total number of UDP datagrams sent from this entity. @GET-FUNC=get_udp_row | 1.3.6.1.4.1.14125.1.4.2 | Counter | read-only | mandatory |
| statusInformationGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14125.2 | |||
| connectedToSSID OBJECT-TYPE This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. @GET-FUNC=get_statusInfo_group @SET-FUNC=set_statusInfo_group | 1.3.6.1.4.1.14125.2.1 | DisplayString | read-write | mandatory |
| usingChannel OBJECT-TYPE The operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. @GET-FUNC=get_statusInfo_group | 1.3.6.1.4.1.14125.2.2 | INTEGER {channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11)} | read-only | mandatory |
| accessPointMACAddress OBJECT-TYPE The MAC address of the Access Point (BSS identifier) with which the radio should Connected or Associated. @GET-FUNC=get_statusInfo_group | 1.3.6.1.4.1.14125.2.3 | PhysAddress | read-only | mandatory |
| currentTransmissionRate OBJECT-TYPE The transmit bit rates operated, corresponding to data rates from 1 Mb/s to 54 Mb/s. @GET-FUNC=get_statusInfo_group | 1.3.6.1.4.1.14125.2.4 | INTEGER | read-only | mandatory |
| currentIPAddress OBJECT-TYPE The IP address of this device used over its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. @GET-FUNC=get_statusInfo_group | 1.3.6.1.4.1.14125.2.5 | IpAddress | read-only | mandatory |
| currentTXPower OBJECT-TYPE The Transmit Power of this device used. @GET-FUNC=get_statusInfo_group @SET-FUNC=set_statusInfo_group | 1.3.6.1.4.1.14125.2.6 | INTEGER {high(1), medium(2), low(3)} | read-write | mandatory |
| countersGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14125.3 | |||
| receivedPacketsGoodCount OBJECT-TYPE The number of good packets received on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group | 1.3.6.1.4.1.14125.3.1 | Counter | read-only | mandatory |
| receivedPacketsBadCount OBJECT-TYPE The number of inbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being received. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. @GET-FUNC=get_counters_group | 1.3.6.1.4.1.14125.3.2 | Counter | read-only | mandatory |
| sendPacketsGoodCount OBJECT-TYPE The number of good packets transmitted on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group | 1.3.6.1.4.1.14125.3.3 | Counter | read-only | mandatory |
| sendPacketsBadCount OBJECT-TYPE The number of outbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. @GET-FUNC=get_counters_group | 1.3.6.1.4.1.14125.3.4 | Counter | read-only | mandatory |
| privacySettingsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14125.4 | |||
| wepEnabled OBJECT-TYPE When this attribute is enable, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be disable. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group | 1.3.6.1.4.1.14125.4.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| wepKeyLength OBJECT-TYPE The length of WEP key that is used for transmitting and received frames of type Data. The value of 0 denotes WEP64bit Hex. Key; 1 stands for WEP128bit Hex. Key @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group | 1.3.6.1.4.1.14125.4.2 | INTEGER {key-64bits(1), key-128bits(2)} | read-write | mandatory |
| wepKeyNumber OBJECT-TYPE This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of 1, 2, 3, or 4. The default value of this attribute shall be 0. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group | 1.3.6.1.4.1.14125.4.3 | INTEGER {wep-key1(1), wep-key2(2), wep-key3(3), wep-key4(4)} | read-write | mandatory |
| wepKey OBJECT-TYPE A WEP secret key value. 10 Hex. Keys for WEP 64Bits/26 Hex. Keys for WEP128Bits. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group | 1.3.6.1.4.1.14125.4.4 | DisplayString | read-write | mandatory |
| systemSettingsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14125.5 | |||
| operationMode OBJECT-TYPE This defines the type of role of a wireless device. The device types are: Bridge(1) -- Bridge AP+WDS(2) -- Access Point+WDS @GET-FUNC=get_system_group | 1.3.6.1.4.1.14125.5.1 | INTEGER {bridge(1), ap-wds(2)} | read-only | mandatory |
| ipAddress OBJECT-TYPE The IP address of this device used over its Ethernet interface in AP mode. The IP address must NOT to set [x.x.x.0] or [x,x.x.255]. @GET-FUNC=get_system_group @SET-FUNC=set_system_group | 1.3.6.1.4.1.14125.5.2 | IpAddress | read-write | mandatory |
| subnetMask OBJECT-TYPE The IP Network mask used by the IP entity when accessing devices through any of its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. The value of subnet mask must set to 0, 128, 192, 224, 240, 248, 252, 254, 255. @GET-FUNC=get_system_group @SET-FUNC=set_system_group | 1.3.6.1.4.1.14125.5.3 | IpAddress | read-write | mandatory |
| ipGateway OBJECT-TYPE The IP address of this device's Gateway. The value of IP Gateway must NOT set to 0 or 255 @GET-FUNC=get_system_group @SET-FUNC=set_system_group | 1.3.6.1.4.1.14125.5.4 | IpAddress | read-write | mandatory |
| deviceName OBJECT-TYPE The description name of this device. The deviceName length is limit between 1~32 characters. @GET-FUNC=get_system_group @SET-FUNC=set_system_group | 1.3.6.1.4.1.14125.5.5 | DisplayString | read-write | mandatory |
| saveReboot OBJECT-TYPE Save and Reboot System. The save Reboot value must set to 1 when you enable this function. @GET-FUNC=get_system_group @SET-FUNC=set_system_group | 1.3.6.1.4.1.14125.5.6 | INTEGER | read-write | mandatory |
| webAdministratorSettingsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14125.6 | |||
| userName OBJECT-TYPE User Name assigned to the system for use when authenticating with Web browser. The username length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SET-FUNC=set_webAdmin_group | 1.3.6.1.4.1.14125.6.1 | DisplayString | read-write | mandatory |
| password OBJECT-TYPE User Password assigned to the system for use when authenticating with Web browser. The password length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SET-FUNC=set_webAdmin_group | 1.3.6.1.4.1.14125.6.2 | DisplayString | read-write | mandatory |
| dhcpSettingsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14125.7 | |||
| dhcpEnabled OBJECT-TYPE When this attribute is enable, it shall indicate that the DHCP mechanism is used. The default value of this attribute shall be disable. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group | 1.3.6.1.4.1.14125.7.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| dhcpLeaseTimes OBJECT-TYPE The value indicates how many minutes for DHCP lease time. The value should be set between 1 and 65535. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group | 1.3.6.1.4.1.14125.7.2 | INTEGER (1..65535) | read-write | mandatory |
| dhcpIPAddressFrom OBJECT-TYPE To set DHCP IP address range between dhcpIPAddressFrom and dhcpIPAddressTo. The IP address must NOT to set [x.x.x.0] or [x,x.x.255].And the DHCP address range must be in the LAN subnet. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group | 1.3.6.1.4.1.14125.7.3 | IpAddress | read-write | mandatory |
| dhcpIPAddressTo OBJECT-TYPE To set DHCP IP address range between dhcpIPAddressFrom and dhcpIPAddressTo. The IP address must NOT to set [x.x.x.0] or [x,x.x.255].And the DHCP address range must be in the LAN subnet. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group | 1.3.6.1.4.1.14125.7.4 | IpAddress | read-write | mandatory |
| wdsSettingsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14125.8 | |||
| wdsEnabled OBJECT-TYPE When this attribute is enable, it shall indicate that the WDS mechanism is used. The default value of this attribute shall be disable. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group | 1.3.6.1.4.1.14125.8.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| wdsAPMACAddress1 OBJECT-TYPE To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group | 1.3.6.1.4.1.14125.8.2 | PhysAddress | read-write | mandatory |
| wdsAPMACAddress2 OBJECT-TYPE To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group | 1.3.6.1.4.1.14125.8.3 | PhysAddress | read-write | mandatory |
| wdsAPMACAddress3 OBJECT-TYPE To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group | 1.3.6.1.4.1.14125.8.4 | PhysAddress | read-write | mandatory |
| wdsAPMACAddress4 OBJECT-TYPE To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group | 1.3.6.1.4.1.14125.8.5 | PhysAddress | read-write | mandatory |
| wdsAPMACAddress5 OBJECT-TYPE To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group | 1.3.6.1.4.1.14125.8.6 | PhysAddress | read-write | mandatory |
| wdsAPMACAddress6 OBJECT-TYPE To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group | 1.3.6.1.4.1.14125.8.7 | PhysAddress | read-write | mandatory |
| wdsKeyUsed OBJECT-TYPE WDS only supports None or WEP security mode. When this attribute is wep, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be none. @GET-FUNC=get_wds_group | 1.3.6.1.4.1.14125.8.8 | INTEGER {none(1), wep(2)} | read-only | mandatory |
| wdsKeyType OBJECT-TYPE WDS only supports None or WEP security mode. The length of WEP key that is used for transmitting and received frames of type Data. The value of 2 denotes WEP64bit Hex. Key; 3 stands for WEP128bit Hex. Key @GET-FUNC=get_wds_group | 1.3.6.1.4.1.14125.8.9 | INTEGER {none(1), key-64bits(2), key-128bits(3)} | read-only | mandatory |