MIBs Depot

SCTE-HMS-MPEG-MIB

Registered at
1.3.6.1.4.1.5591.1.11.5.4.1
Last updated
2008-10-03 17:00
Organization
SCTE HMS Subcommittee
Revisions
2008-10-03 17:00, 2008-10-03 06:49, 2008-10-03 01:35, 2008-10-03 00:00, 2008-02-04 17:00, 2007-12-17 17:00, 2007-10-03 17:00
Namespace
standard
Source file
SCTE-HMS-MPEG-MIB
Digest
sha256:254fb14f700201e07d9f65e65b9b039aa0a30d28f8364ec820363d3fc0e9ee34

Description

This MIB module is for representing MPEG equipment present in the headend and is supported by a SNMP agent. It defines both the MPEG input and output MIB objects for managing MPEG input and output transport streams, programs and elementary streams. It provides both input and output related statistics, as well as program mapping and video session information. All the tables, except mpegProgramMappingTable and mpegVideoSessionTable, capture and store the information related to active transport streams only. Optional MIB objects will have default values defined in this MIB file.

Contact

SCTE HMS Subcommittee, Chairman mailto:standards@scte.org

Imports

FromSymbols
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SCTE-HMS-HEADENDIDENT-TC-MIBHePIDValue, ProgDataType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCAutonomousType, DateAndTime, DisplayString, RowPointer, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SCTE-HMS-HEADENDIDENT-TC-MIB
SCTE-HMS-MPEG-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
mpegMIBObjects
OBJECT-IDENTITY
This branch specifies the MPEG Common MIB objects that can be common to any device using MPEG.
1.3.6.1.4.1.5591.1.11.5.4.1.1current
mpegDigitalInputs
OBJECT-IDENTITY
This branch specifies the attributes of the incoming streams to the MPEG device.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1current
mpegLossOfSignalTimeout
OBJECT-TYPE
This object specifies the loss of signal timeout on any incoming stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.1Unsigned32read-writecurrent
mpegInputTSTable
OBJECT-TYPE
This table specifies the attributes of video sessions or SPTSs.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2not-accessiblecurrent
mpegInputTSEntry
OBJECT-TYPE
Each entry specifies the attributes of a transport stream (SPTS/MPTS).
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1not-accessiblecurrent
mpegInputTSIndex
OBJECT-TYPE
The unique identifier of the Input TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.1Unsigned32not-accessiblecurrent
mpegInputTSType
OBJECT-TYPE
The type of stream, e.g., SPTS or MPTS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.2INTEGER {spts(1), mpts(2)}read-onlycurrent
mpegInputTSConnectionType
OBJECT-TYPE
The type of input flow of the stream. The value 'udp' indicates either unicast or multicast udp origination flows.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.3INTEGER {other(1), udp(2)}read-onlycurrent
mpegInputTSConnection
OBJECT-TYPE
The reference to the start of the data source table that feeds content to the input stream. For the Connection Type 'udp' this object contains the pointer to the first entry of the UDP Origination table Below is an example of the value expected for a Connection Type 'udp'. An input stream (mpegInputTSIndex = 8) is being feed by a udp Connection (mpegInputUdpOriginationIndex = 4) with 3 associated udp streams each one identified by mpegInputUdpOriginationId = 1,2,3. mpegInputTSEntry TSIndex ConnectionType Connection 1 1 <any> 2 1 <any> ... 8 1 mpegInputUdpOriginationIfIndex.4.3 9 2 <any> MpegInputUdpOriginationEntry UdpOriginationIndex UdpOriginationId 3 1,4,5 4 1,2,3 ...
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.4RowPointerread-onlycurrent
mpegInputTSActiveConnection
OBJECT-TYPE
The reference to the instance of the data source that is feeding the input stream. For the Connection Type 'udp' this object contains the pointer to the UDP Origination table that the input Stream is using. Below is an example of the value expected for a Connection Type 'udp'. An input stream (mpegInputTSIndex = 8) is being feed by a udp Connection (mpegInputUdpOriginationIndex = 4) have associated 3 udp streams each one identified by mpegInputUdpOriginationId = 1,2,3. The Udp stream 3 is currently used by the input transport stream. mpegInputTSEntry TSIndex ConnectionType ActiveConnection 1 1 <any> 2 1 <any> ... 8 1 mpegInputUdpOriginationIfIndex.4.3 9 2 <any> MpegInputUdpOriginationEntry UdpOriginationIndex UdpOriginationId 3 1,4,5 4 1,2,3 ... Note in the example that the sub oid 4 (in mpegInputUdpOriginationIfIndex.4.3) represents the sub-oid that aggregates all the udp origination flows associated with the transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.5RowPointerread-onlycurrent
mpegInputTSPsiDetected
OBJECT-TYPE
A simple check that Program Specific Information has or has not been detected. The value 'true' indicates PSI was detected.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.6TruthValueread-onlycurrent
mpegInputTSStartTime
OBJECT-TYPE
Specifies the time the MPEG device started receiving the stream, i.e., the time the entry was added to the table.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.7DateAndTimeread-onlycurrent
mpegInputTSResourceAllocated
OBJECT-TYPE
If true, all resources have been allocated for the stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.8TruthValueread-onlycurrent
mpegInputTSNumPrograms
OBJECT-TYPE
The number of programs in the input transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.9Unsigned32read-onlycurrent
mpegInputTSRate
OBJECT-TYPE
The data rate of the incoming program or SPTS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.10Unsigned32read-onlycurrent
mpegInputTSMaxRate
OBJECT-TYPE
The maximum data rate of the incoming stream for either a variable or constant bit rate stream (VBR/CVR).
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.11Unsigned32read-onlycurrent
mpegInputTSPatVersion
OBJECT-TYPE
Program Association Table version of the transport stream. The value -1 means PAT version is not supported for input transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.12Integer32 (-1..31)read-onlycurrent
mpegInputTSCatVersion
OBJECT-TYPE
The Conditional Access Table version number of transport stream. The value -1 means CAT version is not supported for input transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.13Integer32 (-1..31)read-onlycurrent
mpegInputTSNitPid
OBJECT-TYPE
NIT PID of the input transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.14HePIDValueread-onlycurrent
mpegInputTSNumEmms
OBJECT-TYPE
The number of EMMs in the input stream. The default value 9999 means the device does not support encryption.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.15Unsigned32read-onlycurrent
mpegInputTSTSID
OBJECT-TYPE
The input TSID of the transport stream. A valid TSID is of 16 bits length. If TSID is not supported, all 32-bits shall be set to 1.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.16Unsigned32read-onlycurrent
mpegInputTSLock
OBJECT-TYPE
Indicates the lock status of the transport stream. 'intermittent' means the transport stream is transitioning between lock and unlock state over a period of time. This condition is vendor-specific. 'notMonitored' means the device is not tracking the locking state.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.17INTEGER {locked(1), notLocked(2), intermittent(3), notMonitored(4)}read-onlycurrent
mpegInputProgTable
OBJECT-TYPE
The table describing the PSI of each incoming program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3not-accessiblecurrent
mpegInputProgEntry
OBJECT-TYPE
Each entry specifies the parameters for each incoming program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1not-accessiblecurrent
mpegInputProgIndex
OBJECT-TYPE
This object serves as the third index of this mib table. The index should uniquely identify a program given a transport stream index. In other words, it's unique within same transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.1Unsigned32not-accessiblecurrent
mpegInputProgNo
OBJECT-TYPE
This object specifies the identifier of the program present in the transport stream of the incoming video stream. This information is contained in PAT table.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.2Unsigned32read-onlycurrent
mpegInputProgPmtVersion
OBJECT-TYPE
This object specifies the PMT version of the program. It is a 5-bit unsigned integer. The default value of 0 means input program PMT version is no supported.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.3Unsigned32read-onlycurrent
mpegInputProgPmtPid
OBJECT-TYPE
PMT PID of the program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.4HePIDValueread-onlycurrent
mpegInputProgPcrPid
OBJECT-TYPE
PCR PID of the program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.5HePIDValueread-onlycurrent
mpegInputProgEcmPid
OBJECT-TYPE
This object specifies the ECM PID of the program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.6HePIDValueread-onlycurrent
mpegInputProgNumElems
OBJECT-TYPE
The number of elementary streams in the program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.7Unsigned32read-onlycurrent
mpegInputProgNumEcms
OBJECT-TYPE
The number of ECMs for the program. The default value 9999 means the device does not support encryption.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.8Unsigned32read-onlycurrent
mpegInputProgCaDescr
OBJECT-TYPE
Conditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific information such as ECMs. If any elementary stream is scrambled, a CA descriptor shall be present for the program containing that elementary stream. This object specifies the CA descriptor for this program. If the program does not have an associated CA descriptor, then this object has a zero-length string.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.9OCTET STRING (SIZE(0..256))read-onlycurrent
mpegInputProgScte35Descr
OBJECT-TYPE
SCTE 35 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due to the fact that extensive decoding can be resource intensive and effect scalability. A zero-length string is returned.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.10OCTET STRING (SIZE(0..256))read-onlycurrent
mpegInputProgScte18Descr
OBJECT-TYPE
SCTE 18 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due to the fact that extensive decoding can be resource intensive and effect scalability. A zero-length string is returned.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.11OCTET STRING (SIZE(0..256))read-onlycurrent
mpegProgESTable
OBJECT-TYPE
This table contains information about the elementary streams in a program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4not-accessiblecurrent
mpegProgESEntry
OBJECT-TYPE
A combination of mpegInputTSIndex, mpegInputProgIndex and mpegProgESIndex uniquely identifies an entry in the mpegProgESTable.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1not-accessiblecurrent
mpegProgESIndex
OBJECT-TYPE
The unique index of the elementary stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.1Unsigned32not-accessiblecurrent
mpegProgESPID
OBJECT-TYPE
This is the PID for each transport stream packet which carries the program element.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.2Integer32read-onlycurrent
mpegProgESType
OBJECT-TYPE
The type of elementary stream(video, audio, or data) of the incoming video session received from the video server.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.3ProgDataTyperead-onlycurrent
mpegProgESCaDescr
OBJECT-TYPE
CA descriptor associated with the elementary stream. If there is no CA descriptor for the elementary stream, then this object has a zero-length string.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.4OCTET STRING (SIZE(0..256))read-onlycurrent
mpegProgESScte35Descr
OBJECT-TYPE
SCTE 35 descriptor. If not supported or present, a zero-length string is returned.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.5OCTET STRING (SIZE(0..256))read-onlycurrent
mpegProgESScte18Descr
OBJECT-TYPE
SCTE 18 descriptor. If not supported or present, a zero-length string is returned.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.6OCTET STRING (SIZE(0..256))read-onlycurrent
mpegInputStatsTable
OBJECT-TYPE
Stream statistics, SPTS or MPTS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5not-accessiblecurrent
mpegInputStatsEntry
OBJECT-TYPE
Each entry describes statistics for each Input TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1not-accessiblecurrent
mpegInputStatsPcrJitter
OBJECT-TYPE
This object stores the difference between the actual value of the PCR and its expected value. It is expressed in nanoseconds. This object is default to -1 if it's not supported.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.1Integer32 (-1..2147483647)read-onlycurrent
mpegInputStatsMaxPacketJitter
OBJECT-TYPE
This object stores the measurement of the maximum variation in arrival time or delay between individual packets. It is expressed in milliseconds. This object is default to -1 if it's not supported.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.2Integer32 (-1..2147483647)read-onlycurrent
mpegInputStatsPcrPackets
OBJECT-TYPE
This reflects the number of MPEG transport packets, having PCR, received for the stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.3Counter32read-onlycurrent
mpegInputStatsNonPcrPackets
OBJECT-TYPE
This reflects the number of MPEG transport packets, without PCR, received for the stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.4Counter32read-onlycurrent
mpegInputStatsUnexpectedPackets
OBJECT-TYPE
This reflects the number of transport packets whose PIDs are not expected.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.5Counter32read-onlycurrent
mpegInputStatsContinuityErrors
OBJECT-TYPE
Transport packets have continuity counters. Successive packets have contiguous values in the continuity counter. Continuity counter error occurs when the successive packets do not have contiguous value and discontinuity indicator is not set. This object reflects the number of continuity counter errors.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.6Counter32read-onlycurrent
mpegInputStatsSyncLossPackets
OBJECT-TYPE
When a sync byte is missing in a MPEG packet this value is incremented. This value indicates the number of MPEG packets that had missing sync byte per stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.7Counter32read-onlycurrent
mpegInputStatsPcrIntervalExceeds
OBJECT-TYPE
Indicates the number of times that the interval between two successive PCR packets for any program in the transport stream exceeds 100 milliseconds.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.8Counter32read-onlycurrent
mpegInputUdpOriginationTable
OBJECT-TYPE
Specifies the UDP unicast or multicast flows of an input transport stram. For unicast it represents the UDP port and optionally destination IP address of the input TS origination UDP IP flow. for Multicast it represents the set of SSM multicast groups of the input TS origination UDP IP flow.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6not-accessiblecurrent
mpegInputUdpOriginationEntry
OBJECT-TYPE
Each entry specifies the IP UDP information of the input TS origination.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1not-accessiblecurrent
mpegInputUdpOriginationIndex
OBJECT-TYPE
The unique identifier of the UDP input TS origination information.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.1Unsigned32not-accessiblecurrent
mpegInputUdpOriginationId
OBJECT-TYPE
The unique identifier of each UDP IP flow associated with the input TS UDP origination.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.2Unsigned32not-accessiblecurrent
mpegInputUdpOriginationIfIndex
OBJECT-TYPE
The interface index where the UDP flow is being received.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.3InterfaceIndexread-onlycurrent
mpegInputUdpOriginationInetAddrType
OBJECT-TYPE
The address type associated with input TS origination UDP IP flow. 'ipv4' and 'ipv6' are the only used types.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.4InetAddressTyperead-onlycurrent
mpegInputUdpOriginationSrcInetAddr
OBJECT-TYPE
For Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP flow or the all zeros address if unknown or irrelevant for the input TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.5InetAddressread-onlycurrent
mpegInputUdpOriginationDestInetAddr
OBJECT-TYPE
For multicast it represents the group address of the SSM origination input TS. For unicast UDP IP flows is either the IP destination address of the udp flow or the all zeros address if unknown or irrelevant for the input TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.6InetAddressread-onlycurrent
mpegInputUdpOriginationDestPort
OBJECT-TYPE
The UDP destination port of the UDP IP flow of the input TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.7InetPortNumberread-onlycurrent
mpegInputUdpOriginationActive
OBJECT-TYPE
The activation state of the UDP flow. The value 'true' indicates the UDP flow data stream is being sensed or buffered for the input TS, independently of that flow being used for a video session. Otherwise the value 'false' is reported. For multicast UDP origination flows the value 'true' indicates the UDP flow was successfully joined.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.8TruthValueread-onlycurrent
mpegInputUdpOriginationPacketsDetected
OBJECT-TYPE
Indicates whether UDP flow packets are being detected. It is vendor dependent the determination if packets for a UDP flow are being detected.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.9TruthValueread-onlycurrent
mpegInputUdpOriginationRank
OBJECT-TYPE
Indicates the Rank Priority used to determine the UDP flow selected for the input TS processing and Video Session assignments.
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.10Unsigned32read-onlycurrent
mpegInputUdpOriginationInputTSIndex
OBJECT-TYPE
The mpegInputTSIndex that this entry is associated with
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.11Unsigned32read-onlycurrent
mpegOutputs
OBJECT-IDENTITY
This branch specifies the attributes of the output streams of the MPEG device.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2current
mpegInsertPacketTable
OBJECT-TYPE
This table describes packet insertion information. Typical packets that are inserted at the RF output of a device are PSI, PSIP, and CVCT MPEG packets. These packets have their own PID. This table may be empty if the video device does not support packet insertion or do not have any packet insertion configured.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1not-accessiblecurrent
mpegInsertPacketEntry
OBJECT-TYPE
An entry in the Packet Management Table.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1not-accessiblecurrent
mpegInsertPacketIndex
OBJECT-TYPE
Index of list of packets being inserted into all MPEG streams. This index is unique within the SNMP agent that may be managing multiple MPEG devices.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.1Unsigned32 (1..65536)not-accessiblecurrent
mpegInsertPacketListId
OBJECT-TYPE
Reference number of packets being inserted into MPEG stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.2Unsigned32 (0..65535)read-onlycurrent
mpegInsertPacketImmediateExecution
OBJECT-TYPE
If true, packet insertion starts immediately.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.3TruthValueread-onlycurrent
mpegInsertPacketStartTime
OBJECT-TYPE
Unix epoch start time for insertions (if Immediate Execution is false).
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.4DateAndTimeread-onlycurrent
mpegInsertPacketRepeat
OBJECT-TYPE
Indicates whether the insert packet is one-time or repetitive.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.5INTEGER {repeat(1), oneTime(2)}read-onlycurrent
mpegInsertPacketContinuousFlag
OBJECT-TYPE
If true, packet will be sent periodically, until cancelled.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.6TruthValueread-onlycurrent
mpegInsertPacketRate
OBJECT-TYPE
Rate at which packet list should be inserted.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.7Unsigned32read-onlycurrent
mpegInsertPacketDeviceIfIndex
OBJECT-TYPE
The ifIndex of the output device interface that the packet will be inserted at.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.8InterfaceIndexread-onlycurrent
mpegOutputStatsTable
OBJECT-TYPE
The table specifies the diagnostic stats objects for the outputs transport stream of an MPEG device.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2not-accessiblecurrent
mpegOutputStatsEntry
OBJECT-TYPE
Each entry specifies the diagnostics for each output TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1not-accessiblecurrent
mpegOutputStatsDroppedPackets
OBJECT-TYPE
Number of MPEG packets dropped on this output transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.1Counter32read-onlycurrent
mpegOutputStatsFifoOverflow
OBJECT-TYPE
Number of FIFO overflows on this output transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.2Counter32read-onlycurrent
mpegOutputStatsFifoUnderflow
OBJECT-TYPE
Number of FIFO underflows on this output transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.3Counter32read-onlycurrent
mpegOutputStatsDataRate
OBJECT-TYPE
Data rate for the content on this output transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.4Unsigned32read-onlycurrent
mpegOutputStatsAvailableBandwidth
OBJECT-TYPE
Unused bandwidth on this port.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.5Unsigned32read-onlycurrent
mpegOutputStatsChannelUtilization
OBJECT-TYPE
The current utilization of a channel defined as (measured data rate / total bandwidth ) * 1000. If not applicable, a value of -1 is returned.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.6Integer32 (-1 | 0..1000)read-onlycurrent
mpegOutputStatsTotalPackets
OBJECT-TYPE
The total number of packets output for this transport stream since the start of the output stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.7Counter64read-onlycurrent
mpegOutputTSTable
OBJECT-TYPE
This table specifies the attributes of an outgoing transport stream SPTS or MPTS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3not-accessiblecurrent
mpegOutputTSEntry
OBJECT-TYPE
Each entry specifies the attributes of an output transport stream, SPTS or MPTS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1not-accessiblecurrent
mpegOutputTSIndex
OBJECT-TYPE
Table index. It uniquely identifies a mpegOutputTSEntry. This index is independent from mpegOutputTSTSID.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.1Unsigned32not-accessiblecurrent
mpegOutputTSType
OBJECT-TYPE
The type of stream, e.g., SPTS or MPTS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.2INTEGER {spts(1), mpts(2)}read-onlycurrent
mpegOutputTSConnectionType
OBJECT-TYPE
The type of output flow of the stream. The value 'qam' indicates a QAM output for the stream The value 'udp' indicates either unicast or multicast udp destination flows for the stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.3INTEGER {other(1), qam(2), udp(3)}read-onlycurrent
mpegOutputTSConnection
OBJECT-TYPE
The reference to the instance of the output connection fpr the output stream. For the Connection Type 'qam' this object contains the ifIndex object identifier of the QAM channel for the output stream. For the Connection Type 'udp' this object contains the pointer to the UDP Destination table being used for the output stream. This is similar to mpegInputTSConnection - See description for details.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.4RowPointerread-onlycurrent
mpegOutputTSNumPrograms
OBJECT-TYPE
The number of programs in the output transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.5Unsigned32read-onlycurrent
mpegOutputTSTSID
OBJECT-TYPE
The TSID of the output transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.6Unsigned32read-onlycurrent
mpegOutputTSNitPid
OBJECT-TYPE
NIT PID of the outgoing transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.7HePIDValueread-onlycurrent
mpegOutputTSCaPid
OBJECT-TYPE
The CA PID of the outgoing transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.8HePIDValueread-onlycurrent
mpegOutputTSCatInsertRate
OBJECT-TYPE
The CAT insertion rate.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.9Unsigned32read-onlycurrent
mpegOutputTSPatInsertRate
OBJECT-TYPE
The PAT table interval expressed in ms.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.10Unsigned32read-onlycurrent
mpegOutputTSPmtInsertRate
OBJECT-TYPE
The PMT insertion rate. This is expressed in tables/second.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.11Unsigned32read-onlycurrent
mpegOutputTSStartTime
OBJECT-TYPE
This object specifies the time the MPEG device started transmitting the output stream, i.e., the time the entry was added to the table. The support of this object is optional. If not supported, this object is default to a zero length string.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.12DateAndTimeread-onlycurrent
mpegOutputProgTable
OBJECT-TYPE
The table describing the PSI of each outgoing program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4not-accessiblecurrent
mpegOutputProgEntry
OBJECT-TYPE
Each entry specifies the parameters for each incoming program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1not-accessiblecurrent
mpegOutputProgIndex
OBJECT-TYPE
This object is the table index for output program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.1Unsigned32not-accessiblecurrent
mpegOutputProgNo
OBJECT-TYPE
This object specifies the identifier of the program present in the transport stream of the outgoing program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.2Unsigned32read-onlycurrent
mpegOutputProgPmtVersion
OBJECT-TYPE
This object specifies the PMT version of the outgoing program. The default value of 0 means output program PMT version is not supported.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.3Unsigned32read-onlycurrent
mpegOutputProgPmtPid
OBJECT-TYPE
PMT PID of the outgoing program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.4HePIDValueread-onlycurrent
mpegOutputProgPcrPid
OBJECT-TYPE
PCR PID of the outgoing program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.5HePIDValueread-onlycurrent
mpegOutputProgEcmPid
OBJECT-TYPE
This object specifies the ECM PID of the outgoing program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.6HePIDValueread-onlycurrent
mpegOutputProgNumElems
OBJECT-TYPE
The number of elementary streams in the outgoing program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.7Unsigned32read-onlycurrent
mpegOutputProgNumEcms
OBJECT-TYPE
The number of ECMs for the outgoing program. The default value 9999 means the device does not support encryption.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.8Unsigned32read-onlycurrent
mpegOutputProgCaDescr
OBJECT-TYPE
Conditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific information such as ECMs. If any elementary stream is scrambled, a CA descriptor shall be present for the program containing that elementary stream. This object specifies the CA descriptor for this program. If the outgoing program does not have an associated CA descriptor, then this object has a zero-length string.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.9OCTET STRING (SIZE(0..256))read-onlycurrent
mpegOutputProgScte35Descr
OBJECT-TYPE
SCTE 35 descriptor in the outgoing program. This object is set to a string of zero-length if there's no SCTE 35 descriptor in the outgoing program or not supported.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.10OCTET STRING (SIZE(0..256))read-onlycurrent
mpegOutputProgScte18Descr
OBJECT-TYPE
SCTE 18 descriptor. If not present or not supported, a zero-length string is returned.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.11OCTET STRING (SIZE(0..256))read-onlycurrent
mpegOutputProgElemStatsTable
OBJECT-TYPE
The stats associated with the elementary streams of an MPEG program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5not-accessiblecurrent
mpegOutputProgElemStatsEntry
OBJECT-TYPE
Each entry constitutes the stats for a program associated with a transport stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1not-accessiblecurrent
mpegOutputProgElemStatsIndex
OBJECT-TYPE
The unique identifier of the elementary stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.1Unsigned32not-accessiblecurrent
mpegOutputProgElemStatsPid
OBJECT-TYPE
The Pid of output program elementary stream.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.2HePIDValuenot-accessiblecurrent
mpegOutputProgElemStatsElemType
OBJECT-TYPE
The type of elementary stream (video, audio, or data) of the program. Some devices, such as device, may choose not to report exact type due to scalability issues, in which case, this object shall be set to unknown.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.3INTEGER {video(1), audio(2), data(3), scte18(4), scte35(5), unknown(6)}read-onlycurrent
mpegOutputProgElemStatsDataRate
OBJECT-TYPE
The data rate of the elementary stream. Return -1 if not supported.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.4Integer32read-onlycurrent
mpegOutputUdpDestinationTable
OBJECT-TYPE
Specifies the UDP unicast or multicast of the output TS this entry references. For unicast it represents the UDP port and optionally destination IP address of the output TS destination UDP IP flow. for Multicast it represents the set of SSM multicast groups of the output TS destination UDP IP flow.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6not-accessiblecurrent
mpegOutputUdpDestinationEntry
OBJECT-TYPE
Each entry specifies the IP UDP information of the output TS destination.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1not-accessiblecurrent
mpegOutputUdpDestinationIndex
OBJECT-TYPE
The unique identifier of the UDP output TS destination information.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.1Unsigned32not-accessiblecurrent
mpegOutputUdpDestinationId
OBJECT-TYPE
The unique identifier of each UDP IP flow associated with the output TS UDP destination.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.2Unsigned32not-accessiblecurrent
mpegOutputUdpDestinationIfIndex
OBJECT-TYPE
The interface index where the UDP flow is being sent.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.3InterfaceIndexread-onlycurrent
mpegOutputUdpDestinationInetAddrType
OBJECT-TYPE
The address type associated with output TS destination UDP IP flow.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.4InetAddressTyperead-onlycurrent
mpegOutputUdpDestinationSrcInetAddr
OBJECT-TYPE
For Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP flow or the all zeros address if unknown or irrelevant for the destination output TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.5InetAddressread-onlycurrent
mpegOutputUdpDestinationDestInetAddr
OBJECT-TYPE
For multicast it represents the group address of the SSM destination output TS. For unicast UDP IP flows is either the IP destination address of the udp flow or the all zeros address if unknown or irrelevant for the destination output TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.6InetAddressread-onlycurrent
mpegOutputUdpDestinationDestPort
OBJECT-TYPE
The UDP port of the UDP IP flow of the output TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.7InetPortNumberread-onlycurrent
mpegOutputUdpDestinationOutputTSIndex
OBJECT-TYPE
The mpegOutputTSIndex that this entry is associated with.
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.8Unsigned32read-onlycurrent
mpegProgramMappingTable
OBJECT-TYPE
This table describes program mappings, i.e., ties the input destination to the output destination for every program active in the device.
1.3.6.1.4.1.5591.1.11.5.4.1.1.3not-accessiblecurrent
mpegProgramMappingEntry
OBJECT-TYPE
Each entry describes the mapping, i.e., ties input destination to output destination for a given program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1not-accessiblecurrent
mpegProgramMappingIndex
OBJECT-TYPE
The table index uniquely identifies an entry in mpegProgramMappingTable. This index should be unique within the same SNMP agent that may be managing multiple MPEG devices.
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.1Unsigned32not-accessiblecurrent
mpegProgramMappingOutputProgIndex
OBJECT-TYPE
This object is set to mpegOutputProgIndex of the corresponding entry in mpegOutputProgTable for a given output program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.2Unsigned32read-onlycurrent
mpegProgramMappingOutputTSIndex
OBJECT-TYPE
This object is set to mpegOutputTSIndex of the corresponding entry in mpegOutputProgTable for a given output program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.3Unsigned32read-onlycurrent
mpegProgramMappingInputProgIndex
OBJECT-TYPE
This object is set to the value of mpegInputProgIndex of the corresponding entry in mpegInputProgTable for a given input program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.4Unsigned32read-onlycurrent
mpegProgramMappingInputTSIndex
OBJECT-TYPE
This object is set to the value of mpegInputTSIndex of the corresponding entry in mpegInputProgTable for a given input program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.5Unsigned32read-onlycurrent
mpegVideoSessionTable
OBJECT-TYPE
This table is used to store video session information. The session may be of VOD, SDV or DB type. It captures logical information about a video stream, such as source and destination addresses, UDP port etc, and also ties it with its direct mapping of input and output programs. This table captures video sessions provisioned by both session-based and table-based method. It is capable to support N-M mapping of video programs that's required for redundant source or video stream cloning etc.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4not-accessiblecurrent
mpegVideoSessionEntry
OBJECT-TYPE
Each entry describes a logical video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1not-accessiblecurrent
mpegVideoSessionIndex
OBJECT-TYPE
The table index uniquely identifies an entry in mpegVideoSessionTable. This index should be unique within the same SNMP agent that may be managing multiple MPEG devices.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.1Unsigned32not-accessiblecurrent
mpegVideoSessionPhyMappingIndex
OBJECT-TYPE
This object shall be set to mpegProgramMappingIndex of the corresponding mpegProgramMappingEntry which contains physical mapping between the input and output program.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.2Unsigned32read-onlycurrent
mpegVideoSessionPIDRemap
OBJECT-TYPE
This object value 'true' indicates that the session has PID remapping. The value 'false' indicates that the session has no PID remapping.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.3TruthValueread-onlycurrent
mpegVideoSessionMode
OBJECT-TYPE
Indicates whether the transport stream is associated with a multiplexed session or is pass-through. For pass-through type transport streams, all elementary stream level information in optional.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.4INTEGER {other(1), passThrough(2), multiplexing(3)}read-onlycurrent
mpegVideoSessionState
OBJECT-TYPE
active means in-use, provisioned means not-in-use or active such as video session provisioned for redundant source.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.5INTEGER {active(1), provisioned(2)}read-onlycurrent
mpegVideoSessionProvMethod
OBJECT-TYPE
The type of session, e.g., in QAM table-based or session-based.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.6INTEGER {tableBased(1), sessionBased(2), other(3)}read-onlycurrent
mpegVideoSessionEncryptionType
OBJECT-TYPE
Indicates the encryption algorithm of the session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.7INTEGER {none(1), other(2), preencrypted(3), des(4), des3(5), aes(6), dvbCsa(7), pkey(8), mediac(9), dvs042(10)}read-onlycurrent
mpegVideoSessionEncryptionInfo
OBJECT-TYPE
Indicates a vendor-specific reference to information associated to the session encryption algorithm.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.8AutonomousTyperead-onlycurrent
mpegVideoSessionBitRate
OBJECT-TYPE
Indicates a session throughtput in bps.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.9Unsigned32read-onlycurrent
mpegVideoSessionID
OBJECT-TYPE
The session ID associated with the stream in the case of a session-based QAM. This is not applicable to a table-based QAM. This ID may be used by NMS system to uniquely identify an input program to output program mapping.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.10OCTET STRING (SIZE(0..16))read-onlycurrent
mpegVideoSessionSelectedInput
OBJECT-TYPE
The reference to the entry of the input flow currently being used in the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.11RowPointerread-onlycurrent
mpegVideoSessionSelectedOutput
OBJECT-TYPE
The reference to the entry of the output flow currently being used in the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.12RowPointerread-onlycurrent
mpegVideoSessionPtrTable
OBJECT-TYPE
This table is used to provide a quick reference of the Program Mapping and input/output TS connection information associated with a Video Session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5not-accessiblecurrent
mpegVideoSessionPtrEntry
OBJECT-TYPE
Each entry describes the associations with ProgramMapping and transport stream connections.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1not-accessiblecurrent
mpegVideoSessionPtrInputProgIndex
OBJECT-TYPE
Indicates the Input Program index value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.1Unsigned32not-accessiblecurrent
mpegVideoSessionPtrInputTSIndex
OBJECT-TYPE
Indicates the input TS index value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.2Unsigned32not-accessiblecurrent
mpegVideoSessionPtrInputTSConnType
OBJECT-TYPE
Indicates the Input TS Connection type value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.3Unsigned32not-accessiblecurrent
mpegVideoSessionPtrInputTSConnection
OBJECT-TYPE
Indicates the Input TS Connection value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.4Unsigned32not-accessiblecurrent
mpegVideoSessionPtrOutputProgIndex
OBJECT-TYPE
Indicates the Output Program index value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.5Unsigned32not-accessiblecurrent
mpegVideoSessionPtrOutputTSIndex
OBJECT-TYPE
Indicates the Output TS index value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.6Unsigned32not-accessiblecurrent
mpegVideoSessionPtrOutputTSConnType
OBJECT-TYPE
Indicates the Output TS Connection type value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.7Unsigned32not-accessiblecurrent
mpegVideoSessionPtrOutputTSConnection
OBJECT-TYPE
Indicates the Output TS Connection value of the video session.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.8Unsigned32not-accessiblecurrent
mpegVideoSessionPtrStatus
OBJECT-TYPE
Indicates the status of the session. Only active sessions need to be reported.
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.9INTEGER {active(1), closed(2)}read-onlycurrent
mpegInputTSOutputSessionTable
OBJECT-TYPE
Specifies the list of Output Session indexes that the Input TS entry is feeding. For unicast it will typically point to just one output Session. For multicast, it will point to all the output Sessions using this internally replicated input TS.
1.3.6.1.4.1.5591.1.11.5.4.1.1.6not-accessiblecurrent
mpegInputTSOutputSessionEntry
OBJECT-TYPE
Each entry specifies the sessionID associated with the Input TS Entry Index.
1.3.6.1.4.1.5591.1.11.5.4.1.1.6.1not-accessiblecurrent
mpegInputTSOutputSessionCreateTime
OBJECT-TYPE
Indicates the Creation Time of the session referenced by this entry.
1.3.6.1.4.1.5591.1.11.5.4.1.1.6.1.1DateAndTimeread-onlycurrent
mpegMIBConformance
OBJECT-IDENTITY
This branch describes the different MPEG MIB object groups and the different levels of compliance.
1.3.6.1.4.1.5591.1.11.5.4.1.2current
mpegMIBCompliances
OBJECT-IDENTITY
The different levels of compliance to the MPEG MIB.
1.3.6.1.4.1.5591.1.11.5.4.1.2.1current
mpegMIBGroups
OBJECT-IDENTITY
The MPEG MIB object groups.
1.3.6.1.4.1.5591.1.11.5.4.1.2.2current

Conformance

NameOIDStatus
mpegSupport
MODULE-COMPLIANCE
These objects describe the support level for MPEG.
1.3.6.1.4.1.5591.1.11.5.4.1.2.1.1current
mpegInputGroup
OBJECT-GROUP
The input objects of the MPEG device.
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.1current
mpegInputProgESGroup
OBJECT-GROUP
This table contains information about the elementary streams in a program.
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.2current
mpegOutputGroup
OBJECT-GROUP
The output objects of the MPEG device.
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.3current
mpegOutputProgElemStatsGroup
OBJECT-GROUP
The stats associated with the elementary streams of an MPEG program.
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.4current
mpegMappingsGroup
OBJECT-GROUP
The group of objects describing program mappings within the Device.
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.5current
mpegSessionsGroup
OBJECT-GROUP
The group of objects describing program mappings within the Device.
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.6current