SAVEPOWER-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.5.1.56
- Last updated
- 2010-08-12 00:00
- Organization
- HP Networking
- Revisions
- 2010-08-12 00:00, 2008-10-17 14:30
- Namespace
- hp
- Source file
SAVEPOWER-MIB- Digest
sha256:2550e36cb7e61515a77c824c33096a0bcdaf0f2d13dd1ebf3c27eef29e457e15
Description
The MIB module is for saving power in blocks that control the physical ports.
Contact
Postal: Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747
Imports
| From | Symbols |
|---|---|
| ENTITY-MIB | entPhysicalIndex |
| HP-ICF-OID | hpSwitch |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB HP-ICF-OID IANA-ENTITY-MIB SAVEPOWER-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| SavepowerBlockIndex TEXTUAL-CONVENTION A unique value that serves as an index to identify the Power block ID that controls power distribution to a group of ports associated with the block-id. | current | |||
| SavepowerControl TEXTUAL-CONVENTION An enumerated value which provides an indication of the state of the power block. If power to the block is ON the state would be powerOn and if power to the block is OFF the state would be powerOff. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpicfSavepowerScalars OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.1 | |||
| hpicfSavepowerMaxBlocks OBJECT-TYPE The maximum number of Power blocks in the switch which are associated to a group of ports to power on/off. The number of power blocks and ports associated with a block are platform dependent. | 1.3.6.1.4.1.11.2.14.11.5.1.56.1.1 | Unsigned32 | read-only | current |
| hpicfSavepowerEnabledPorts OBJECT-TYPE This indicates the total number of ports in the switch that are powered off. | 1.3.6.1.4.1.11.2.14.11.5.1.56.1.2 | Unsigned32 | read-only | current |
| hpicfSavepowerLEDScalars OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.1.3 | |||
| hpicfSavePowerLEDOffAlarmStartTime OBJECT-TYPE This is the scheduled time at which the all the switch LEDs would be turned off. | 1.3.6.1.4.1.11.2.14.11.5.1.56.1.3.1 | DateAndTime | read-write | current |
| hpicfSavePowerLEDOffAlarmDuration OBJECT-TYPE This is the duration of the alarm time during which the switch would be in LED power save mode, and the switch LEDs would be turned off. | 1.3.6.1.4.1.11.2.14.11.5.1.56.1.3.2 | Unsigned32 | read-write | current |
| hpicfSavePowerLEDOffAlarmRecur OBJECT-TYPE The truth value used to indicate if the timer for LED off will be recurring. | 1.3.6.1.4.1.11.2.14.11.5.1.56.1.3.3 | TruthValue | read-write | current |
| hpicfEntitySavepower OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.2 | |||
| hpicfSavepowerTable OBJECT-TYPE This table contains one row for every power block that controls a group of physical ports. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.1 | not-accessible | current | |
| hpicfSavepowerEntry OBJECT-TYPE Information about Savepower table. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1 | not-accessible | current | |
| hpicfSavepowerBlockID OBJECT-TYPE The index that is used to access the power block entry table. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.1 | SavepowerBlockIndex | not-accessible | current |
| hpicfSavepowerControl OBJECT-TYPE This indicates if the power to the block is powerOn (1) or powerOff (2). | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.2 | SavepowerControl | read-write | current |
| hpicfSavepowerBlockPorts OBJECT-TYPE This indicates the port-range associated to the hpisfSavepowerBlockID. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.3 | DisplayString | read-only | current |
| hpicfSavepowerGreenFeaturesTable OBJECT-TYPE This table contains a row for different entities and shows the admin status and operational status of the power and LED for that entity. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.2 | not-accessible | current | |
| hpicfSavepowerGreenFeaturesEntry OBJECT-TYPE Information about SavepowerGreenFeatures table. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1 | not-accessible | current | |
| hpicfSavepowerEntityPowerAdminStatus OBJECT-TYPE The truth value indicates the configured status of the entity power. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.1 | TruthValue | read-write | current |
| hpicfSavepowerEntityPowerOperStatus OBJECT-TYPE This indicates the operational status of the entity as powerOn(1) if turned on or powerOff(2) if turned off. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.2 | SavepowerControl | read-only | current |
| hpicfSavepowerEntityLEDAdminStatus OBJECT-TYPE The truth value indicates the configured status of the entity's LED power status. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.3 | TruthValue | read-write | current |
| hpicfSavepowerEntityLEDOperStatus OBJECT-TYPE This indicates if the operational status of the entity's LED power is powerOn (1) or powerOff (2). | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.4 | SavepowerControl | read-only | current |
| hpicfSavepowerPHYTable OBJECT-TYPE This table contains a row for every port for which the PHY will be put to auto low power mode or normal power mode and contains the admin status and operational status of the PHY . | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.3 | not-accessible | current | |
| hpicfSavepowerPHYEntry OBJECT-TYPE Information about PHY power status for ports. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1 | not-accessible | current | |
| hpicfSavepowerSlotNum OBJECT-TYPE This value serves as an index to identify the slot no. for the PHY. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.1 | Unsigned32 | not-accessible | current |
| hpicfSavepowerPortNum OBJECT-TYPE This value serves as an index to identify the port no. for the PHY. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.2 | Unsigned32 | not-accessible | current |
| hpicfSavepowerPHYAdminStatus OBJECT-TYPE The truth value indicates the configured status of the auto low power mode for the PHY. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.3 | TruthValue | read-write | current |
| hpicfSavepowerPHYOperStatus OBJECT-TYPE This indicates if the operational status of the PHY power is auto low power mode i.e. powerOff(2) or normal power mode i.e. or powerOn(1). | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.4 | SavepowerControl | read-only | current |
| hpicfSavepowerEntPHYTable OBJECT-TYPE This table contains a row for every member in a stack setup or for a standalone device or for every slot in a chassis, for which the PHY will be put to auto low power mode or normal power mode and contains the admin status and operational status of the PHY . | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.4 | not-accessible | current | |
| hpicfSavepowerEntPHYEntry OBJECT-TYPE Information about PHY power status. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1 | not-accessible | current | |
| hpicfSavepowerEntPHYAdminStatus OBJECT-TYPE The truth value indicates the configured status of the auto low power mode for the PHY. True indicates PHY is in low power mode. | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1.1 | TruthValue | read-write | current |
| hpicfSavepowerEntPHYOperStatus OBJECT-TYPE This indicates if the operational status of the PHY power is auto low power mode i.e. powerOff(2) or normal power mode i.e. powerOn(1). | 1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1.2 | SavepowerControl | read-only | current |
| hpicfSavepowerConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.3 | |||
| hpicfSavepowerCompliance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.1 | |||
| hpicfSavepowerGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.2 | |||
| hpicfPHYConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.4 | |||
| hpicfPHYCompliance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.4.1 | |||
| hpicfPHYGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.56.4.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| hpicfSavepowerComplianceInfo MODULE-COMPLIANCE The compliance statement for entries which implement the SAVEPOWER MIB. | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.1.1 | current |
| hpicfSavepowerScalarsGroup OBJECT-GROUP Basic Scalars required in SAVEPOWER MIB implementation. | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.1 | current |
| hpicfSavepowerLEDScalarsGroup OBJECT-GROUP Scalars required for LED turn off feature. | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.2 | current |
| hpicfSavepowerGreenFeaturesGroup OBJECT-GROUP SAVEPOWER Green Features parameters | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.3 | current |
| hpicfSavepowerPHYGroup OBJECT-GROUP SAVEPOWER MIB parameters | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.4 | current |
| hpicfSavepowerGroup OBJECT-GROUP SAVEPOWER MIB parameters | 1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.5 | current |
| hpicfPHYComplianceInfo MODULE-COMPLIANCE The compliance statement for entries which implement the PORT LOW POWER. | 1.3.6.1.4.1.11.2.14.11.5.1.56.4.1.1 | current |
| hpicfSavepowerEntPHYGroup OBJECT-GROUP PORT-LOW-POWER MIB parameters | 1.3.6.1.4.1.11.2.14.11.5.1.56.4.2.1 | current |